This tab is temporary unti I figure out how to handel drag/drop correctly.
Select which board layer(s) to render. Toolpaths and Gcode will be generated for the selected layer(s) only.
Select which axis to use when flipping bottom layer(s). This selection has no effect on top layers
Select which board items to see in the 3D viewer, these selection has no effect on toolpaths and Gcode generation.
This allows you to hide the popup windows as you mouse around with the 3D viewer. They can sometimes get in the way when iterating the best endmill sizes and inflate by values.
Location of left bottom corner of blank FR4 board
Check Blank FR4 Board to enable this feature.
The following settings will generate Gcode to drill registration holes. This will be a seperate Gcode file available in the textbox below. The registration holes are useful when milling a board with multiple layers or whenever there is a need to remove the board and put it back in exactly the same location.
Holes PatternT: Top, B: Bottom, L: Left, R: Right.
Following Gcode parementers are used for drilling registration holes only.
Depth for DrillingThis is the content of tab 3.
Some text in the Modal Body
Some other text...