# Copyright 2020 The Knative Authors # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # https://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. apiVersion: apiextensions.k8s.io/v1 kind: CustomResourceDefinition metadata: name: certificates.networking.internal.knative.dev labels: serving.knative.dev/release: "v0.26.2" knative.dev/crd-install: "true" spec: group: networking.internal.knative.dev versions: - name: v1alpha1 served: true storage: true subresources: status: {} schema: openAPIV3Schema: type: object # this is a work around so we don't need to flush out the # schema for each version at this time # # see issue: https://github.com/knative/serving/issues/912 x-kubernetes-preserve-unknown-fields: true additionalPrinterColumns: - name: Ready type: string jsonPath: ".status.conditions[?(@.type==\"Ready\")].status" - name: Reason type: string jsonPath: ".status.conditions[?(@.type==\"Ready\")].reason" names: kind: Certificate plural: certificates singular: certificate categories: - knative-internal - networking shortNames: - kcert scope: Namespaced --- # Copyright 2019 The Knative Authors # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # https://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. # Note: The schema part of the spec is auto-generated by hack/update-schemas.sh. apiVersion: apiextensions.k8s.io/v1 kind: CustomResourceDefinition metadata: name: configurations.serving.knative.dev labels: serving.knative.dev/release: "v0.26.2" knative.dev/crd-install: "true" duck.knative.dev/podspecable: "true" spec: group: serving.knative.dev names: kind: Configuration plural: configurations singular: configuration categories: - all - knative - serving shortNames: - config - cfg scope: Namespaced versions: - name: v1 served: true storage: true subresources: status: {} additionalPrinterColumns: - name: LatestCreated type: string jsonPath: .status.latestCreatedRevisionName - name: LatestReady type: string jsonPath: .status.latestReadyRevisionName - name: Ready type: string jsonPath: ".status.conditions[?(@.type=='Ready')].status" - name: Reason type: string jsonPath: ".status.conditions[?(@.type=='Ready')].reason" schema: openAPIV3Schema: description: 'Configuration represents the "floating HEAD" of a linear history of Revisions. Users create new Revisions by updating the Configuration''s spec. The "latest created" revision''s name is available under status, as is the "latest ready" revision''s name. See also: https://github.com/knative/serving/blob/main/docs/spec/overview.md#configuration' type: object properties: apiVersion: description: 'APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' type: string kind: description: 'Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' type: string metadata: type: object spec: description: ConfigurationSpec holds the desired state of the Configuration (from the client). type: object properties: template: description: Template holds the latest specification for the Revision to be stamped out. type: object properties: metadata: type: object properties: annotations: type: object additionalProperties: type: string finalizers: type: array items: type: string labels: type: object additionalProperties: type: string name: type: string namespace: type: string x-kubernetes-preserve-unknown-fields: true spec: description: RevisionSpec holds the desired state of the Revision (from the client). type: object required: - containers properties: automountServiceAccountToken: description: AutomountServiceAccountToken indicates whether a service account token should be automatically mounted. type: boolean containerConcurrency: description: ContainerConcurrency specifies the maximum allowed in-flight (concurrent) requests per container of the Revision. Defaults to `0` which means concurrency to the application is not limited, and the system decides the target concurrency for the autoscaler. type: integer format: int64 containers: description: List of containers belonging to the pod. Containers cannot currently be added or removed. There must be at least one container in a Pod. Cannot be updated. type: array items: description: A single application container that you want to run within a pod. type: object properties: args: description: 'Arguments to the entrypoint. The docker image''s CMD is used if this is not provided. Variable references $(VAR_NAME) are expanded using the container''s environment. If a variable cannot be resolved, the reference in the input string will be unchanged. The $(VAR_NAME) syntax can be escaped with a double $$, ie: $$(VAR_NAME). Escaped references will never be expanded, regardless of whether the variable exists or not. Cannot be updated. More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell' type: array items: type: string command: description: 'Entrypoint array. Not executed within a shell. The docker image''s ENTRYPOINT is used if this is not provided. Variable references $(VAR_NAME) are expanded using the container''s environment. If a variable cannot be resolved, the reference in the input string will be unchanged. The $(VAR_NAME) syntax can be escaped with a double $$, ie: $$(VAR_NAME). Escaped references will never be expanded, regardless of whether the variable exists or not. Cannot be updated. More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell' type: array items: type: string env: description: List of environment variables to set in the container. Cannot be updated. type: array items: description: EnvVar represents an environment variable present in a Container. type: object required: - name properties: name: description: Name of the environment variable. Must be a C_IDENTIFIER. type: string value: description: 'Variable references $(VAR_NAME) are expanded using the previous defined environment variables in the container and any service environment variables. If a variable cannot be resolved, the reference in the input string will be unchanged. The $(VAR_NAME) syntax can be escaped with a double $$, ie: $$(VAR_NAME). Escaped references will never be expanded, regardless of whether the variable exists or not. Defaults to "".' type: string valueFrom: description: Source for the environment variable's value. Cannot be used if value is not empty. type: object properties: configMapKeyRef: description: Selects a key of a ConfigMap. type: object required: - key properties: key: description: The key to select. type: string name: description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?' type: string optional: description: Specify whether the ConfigMap or its key must be defined type: boolean secretKeyRef: description: Selects a key of a secret in the pod's namespace type: object required: - key properties: key: description: The key of the secret to select from. Must be a valid secret key. type: string name: description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?' type: string optional: description: Specify whether the Secret or its key must be defined type: boolean x-kubernetes-preserve-unknown-fields: true envFrom: description: List of sources to populate environment variables in the container. The keys defined within a source must be a C_IDENTIFIER. All invalid keys will be reported as an event when the container is starting. When a key exists in multiple sources, the value associated with the last source will take precedence. Values defined by an Env with a duplicate key will take precedence. Cannot be updated. type: array items: description: EnvFromSource represents the source of a set of ConfigMaps type: object properties: configMapRef: description: The ConfigMap to select from type: object properties: name: description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?' type: string optional: description: Specify whether the ConfigMap must be defined type: boolean prefix: description: An optional identifier to prepend to each key in the ConfigMap. Must be a C_IDENTIFIER. type: string secretRef: description: The Secret to select from type: object properties: name: description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?' type: string optional: description: Specify whether the Secret must be defined type: boolean image: description: 'Docker image name. More info: https://kubernetes.io/docs/concepts/containers/images This field is optional to allow higher level config management to default or override container images in workload controllers like Deployments and StatefulSets.' type: string imagePullPolicy: description: 'Image pull policy. One of Always, Never, IfNotPresent. Defaults to Always if :latest tag is specified, or IfNotPresent otherwise. Cannot be updated. More info: https://kubernetes.io/docs/concepts/containers/images#updating-images' type: string livenessProbe: description: 'Periodic probe of container liveness. Container will be restarted if the probe fails. Cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes' type: object properties: exec: description: One and only one of the following should be specified. Exec specifies the action to take. type: object properties: command: description: Command is the command line to execute inside the container, the working directory for the command is root ('/') in the container's filesystem. The command is simply exec'd, it is not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use a shell, you need to explicitly call out to that shell. Exit status of 0 is treated as live/healthy and non-zero is unhealthy. type: array items: type: string failureThreshold: description: Minimum consecutive failures for the probe to be considered failed after having succeeded. Defaults to 3. Minimum value is 1. type: integer format: int32 httpGet: description: HTTPGet specifies the http request to perform. type: object properties: host: description: Host name to connect to, defaults to the pod IP. You probably want to set "Host" in httpHeaders instead. type: string httpHeaders: description: Custom headers to set in the request. HTTP allows repeated headers. type: array items: description: HTTPHeader describes a custom header to be used in HTTP probes type: object required: - name - value properties: name: description: The header field name type: string value: description: The header field value type: string path: description: Path to access on the HTTP server. type: string scheme: description: Scheme to use for connecting to the host. Defaults to HTTP. type: string x-kubernetes-preserve-unknown-fields: true initialDelaySeconds: description: 'Number of seconds after the container has started before liveness probes are initiated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes' type: integer format: int32 periodSeconds: description: How often (in seconds) to perform the probe. type: integer format: int32 successThreshold: description: Minimum consecutive successes for the probe to be considered successful after having failed. Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. type: integer format: int32 tcpSocket: description: 'TCPSocket specifies an action involving a TCP port. TCP hooks not yet supported TODO: implement a realistic TCP lifecycle hook' type: object properties: host: description: 'Optional: Host name to connect to, defaults to the pod IP.' type: string x-kubernetes-preserve-unknown-fields: true timeoutSeconds: description: 'Number of seconds after which the probe times out. Defaults to 1 second. Minimum value is 1. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes' type: integer format: int32 name: description: Name of the container specified as a DNS_LABEL. Each container in a pod must have a unique name (DNS_LABEL). Cannot be updated. type: string ports: description: List of ports to expose from the container. Exposing a port here gives the system additional information about the network connections a container uses, but is primarily informational. Not specifying a port here DOES NOT prevent that port from being exposed. Any port which is listening on the default "0.0.0.0" address inside a container will be accessible from the network. Cannot be updated. type: array items: description: ContainerPort represents a network port in a single container. type: object required: - containerPort properties: containerPort: description: Number of port to expose on the pod's IP address. This must be a valid port number, 0 < x < 65536. type: integer format: int32 name: description: If specified, this must be an IANA_SVC_NAME and unique within the pod. Each named port in a pod must have a unique name. Name for the port that can be referred to by services. type: string protocol: description: Protocol for port. Must be UDP, TCP, or SCTP. Defaults to "TCP". type: string default: TCP x-kubernetes-preserve-unknown-fields: true x-kubernetes-list-map-keys: - containerPort - protocol x-kubernetes-list-type: map readinessProbe: description: 'Periodic probe of container service readiness. Container will be removed from service endpoints if the probe fails. Cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes' type: object properties: exec: description: One and only one of the following should be specified. Exec specifies the action to take. type: object properties: command: description: Command is the command line to execute inside the container, the working directory for the command is root ('/') in the container's filesystem. The command is simply exec'd, it is not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use a shell, you need to explicitly call out to that shell. Exit status of 0 is treated as live/healthy and non-zero is unhealthy. type: array items: type: string failureThreshold: description: Minimum consecutive failures for the probe to be considered failed after having succeeded. Defaults to 3. Minimum value is 1. type: integer format: int32 httpGet: description: HTTPGet specifies the http request to perform. type: object properties: host: description: Host name to connect to, defaults to the pod IP. You probably want to set "Host" in httpHeaders instead. type: string httpHeaders: description: Custom headers to set in the request. HTTP allows repeated headers. type: array items: description: HTTPHeader describes a custom header to be used in HTTP probes type: object required: - name - value properties: name: description: The header field name type: string value: description: The header field value type: string path: description: Path to access on the HTTP server. type: string scheme: description: Scheme to use for connecting to the host. Defaults to HTTP. type: string x-kubernetes-preserve-unknown-fields: true initialDelaySeconds: description: 'Number of seconds after the container has started before liveness probes are initiated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes' type: integer format: int32 periodSeconds: description: How often (in seconds) to perform the probe. type: integer format: int32 successThreshold: description: Minimum consecutive successes for the probe to be considered successful after having failed. Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. type: integer format: int32 tcpSocket: description: 'TCPSocket specifies an action involving a TCP port. TCP hooks not yet supported TODO: implement a realistic TCP lifecycle hook' type: object properties: host: description: 'Optional: Host name to connect to, defaults to the pod IP.' type: string x-kubernetes-preserve-unknown-fields: true timeoutSeconds: description: 'Number of seconds after which the probe times out. Defaults to 1 second. Minimum value is 1. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes' type: integer format: int32 resources: description: 'Compute Resources required by this container. Cannot be updated. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/' type: object properties: limits: description: 'Limits describes the maximum amount of compute resources allowed. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/' type: object additionalProperties: pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ anyOf: - type: integer - type: string x-kubernetes-int-or-string: true requests: description: 'Requests describes the minimum amount of compute resources required. If Requests is omitted for a container, it defaults to Limits if that is explicitly specified, otherwise to an implementation-defined value. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/' type: object additionalProperties: pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ anyOf: - type: integer - type: string x-kubernetes-int-or-string: true securityContext: description: 'Security options the pod should run with. More info: https://kubernetes.io/docs/concepts/policy/security-context/ More info: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/' type: object properties: capabilities: description: The capabilities to add/drop when running containers. Defaults to the default set of capabilities granted by the container runtime. type: object properties: drop: description: Removed capabilities type: array items: description: Capability represent POSIX capabilities type type: string x-kubernetes-preserve-unknown-fields: true readOnlyRootFilesystem: description: Whether this container has a read-only root filesystem. Default is false. type: boolean runAsUser: description: The UID to run the entrypoint of the container process. Defaults to user specified in image metadata if unspecified. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. type: integer format: int64 x-kubernetes-preserve-unknown-fields: true terminationMessagePath: description: 'Optional: Path at which the file to which the container''s termination message will be written is mounted into the container''s filesystem. Message written is intended to be brief final status, such as an assertion failure message. Will be truncated by the node if greater than 4096 bytes. The total message length across all containers will be limited to 12kb. Defaults to /dev/termination-log. Cannot be updated.' type: string terminationMessagePolicy: description: Indicate how the termination message should be populated. File will use the contents of terminationMessagePath to populate the container status message on both success and failure. FallbackToLogsOnError will use the last chunk of container log output if the termination message file is empty and the container exited with an error. The log output is limited to 2048 bytes or 80 lines, whichever is smaller. Defaults to File. Cannot be updated. type: string volumeMounts: description: Pod volumes to mount into the container's filesystem. Cannot be updated. type: array items: description: VolumeMount describes a mounting of a Volume within a container. type: object required: - mountPath - name properties: mountPath: description: Path within the container at which the volume should be mounted. Must not contain ':'. type: string name: description: This must match the Name of a Volume. type: string readOnly: description: Mounted read-only if true, read-write otherwise (false or unspecified). Defaults to false. type: boolean subPath: description: Path within the volume from which the container's volume should be mounted. Defaults to "" (volume's root). type: string workingDir: description: Container's working directory. If not specified, the container runtime's default will be used, which might be configured in the container image. Cannot be updated. type: string x-kubernetes-preserve-unknown-fields: true enableServiceLinks: description: 'EnableServiceLinks indicates whether information about services should be injected into pod''s environment variables, matching the syntax of Docker links. Optional: Defaults to true.' type: boolean imagePullSecrets: description: 'ImagePullSecrets is an optional list of references to secrets in the same namespace to use for pulling any of the images used by this PodSpec. If specified, these secrets will be passed to individual puller implementations for them to use. For example, in the case of docker, only DockerConfig type secrets are honored. More info: https://kubernetes.io/docs/concepts/containers/images#specifying-imagepullsecrets-on-a-pod' type: array items: description: LocalObjectReference contains enough information to let you locate the referenced object inside the same namespace. type: object properties: name: description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?' type: string serviceAccountName: description: 'ServiceAccountName is the name of the ServiceAccount to use to run this pod. More info: https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/' type: string timeoutSeconds: description: TimeoutSeconds is the maximum duration in seconds that the request routing layer will wait for a request delivered to a container to begin replying (send network traffic). If unspecified, a system default will be provided. type: integer format: int64 volumes: description: 'List of volumes that can be mounted by containers belonging to the pod. More info: https://kubernetes.io/docs/concepts/storage/volumes' type: array items: description: Volume represents a named volume in a pod that may be accessed by any container in the pod. type: object required: - name properties: configMap: description: ConfigMap represents a configMap that should populate this volume type: object properties: defaultMode: description: 'Optional: mode bits used to set permissions on created files by default. Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. Defaults to 0644. Directories within the path are not affected by this setting. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.' type: integer format: int32 items: description: If unspecified, each key-value pair in the Data field of the referenced ConfigMap will be projected into the volume as a file whose name is the key and content is the value. If specified, the listed keys will be projected into the specified paths, and unlisted keys will not be present. If a key is specified which is not present in the ConfigMap, the volume setup will error unless it is marked optional. Paths must be relative and may not contain the '..' path or start with '..'. type: array items: description: Maps a string key to a path within a volume. type: object required: - key - path properties: key: description: The key to project. type: string mode: description: 'Optional: mode bits used to set permissions on this file. Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. If not specified, the volume defaultMode will be used. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.' type: integer format: int32 path: description: The relative path of the file to map the key to. May not be an absolute path. May not contain the path element '..'. May not start with the string '..'. type: string name: description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?' type: string optional: description: Specify whether the ConfigMap or its keys must be defined type: boolean name: description: 'Volume''s name. Must be a DNS_LABEL and unique within the pod. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names' type: string projected: description: Items for all in one resources secrets, configmaps, and downward API type: object properties: defaultMode: description: Mode bits used to set permissions on created files by default. Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. Directories within the path are not affected by this setting. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set. type: integer format: int32 sources: description: list of volume projections type: array items: description: Projection that may be projected along with other supported volume types type: object properties: configMap: description: information about the configMap data to project type: object properties: items: description: If unspecified, each key-value pair in the Data field of the referenced ConfigMap will be projected into the volume as a file whose name is the key and content is the value. If specified, the listed keys will be projected into the specified paths, and unlisted keys will not be present. If a key is specified which is not present in the ConfigMap, the volume setup will error unless it is marked optional. Paths must be relative and may not contain the '..' path or start with '..'. type: array items: description: Maps a string key to a path within a volume. type: object required: - key - path properties: key: description: The key to project. type: string mode: description: 'Optional: mode bits used to set permissions on this file. Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. If not specified, the volume defaultMode will be used. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.' type: integer format: int32 path: description: The relative path of the file to map the key to. May not be an absolute path. May not contain the path element '..'. May not start with the string '..'. type: string name: description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?' type: string optional: description: Specify whether the ConfigMap or its keys must be defined type: boolean secret: description: information about the secret data to project type: object properties: items: description: If unspecified, each key-value pair in the Data field of the referenced Secret will be projected into the volume as a file whose name is the key and content is the value. If specified, the listed keys will be projected into the specified paths, and unlisted keys will not be present. If a key is specified which is not present in the Secret, the volume setup will error unless it is marked optional. Paths must be relative and may not contain the '..' path or start with '..'. type: array items: description: Maps a string key to a path within a volume. type: object required: - key - path properties: key: description: The key to project. type: string mode: description: 'Optional: mode bits used to set permissions on this file. Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. If not specified, the volume defaultMode will be used. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.' type: integer format: int32 path: description: The relative path of the file to map the key to. May not be an absolute path. May not contain the path element '..'. May not start with the string '..'. type: string name: description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?' type: string optional: description: Specify whether the Secret or its key must be defined type: boolean serviceAccountToken: description: information about the serviceAccountToken data to project type: object required: - path properties: audience: description: Audience is the intended audience of the token. A recipient of a token must identify itself with an identifier specified in the audience of the token, and otherwise should reject the token. The audience defaults to the identifier of the apiserver. type: string expirationSeconds: description: ExpirationSeconds is the requested duration of validity of the service account token. As the token approaches expiration, the kubelet volume plugin will proactively rotate the service account token. The kubelet will start trying to rotate the token if the token is older than 80 percent of its time to live or if the token is older than 24 hours.Defaults to 1 hour and must be at least 10 minutes. type: integer format: int64 path: description: Path is the path relative to the mount point of the file to project the token into. type: string secret: description: 'Secret represents a secret that should populate this volume. More info: https://kubernetes.io/docs/concepts/storage/volumes#secret' type: object properties: defaultMode: description: 'Optional: mode bits used to set permissions on created files by default. Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. Defaults to 0644. Directories within the path are not affected by this setting. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.' type: integer format: int32 items: description: If unspecified, each key-value pair in the Data field of the referenced Secret will be projected into the volume as a file whose name is the key and content is the value. If specified, the listed keys will be projected into the specified paths, and unlisted keys will not be present. If a key is specified which is not present in the Secret, the volume setup will error unless it is marked optional. Paths must be relative and may not contain the '..' path or start with '..'. type: array items: description: Maps a string key to a path within a volume. type: object required: - key - path properties: key: description: The key to project. type: string mode: description: 'Optional: mode bits used to set permissions on this file. Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. If not specified, the volume defaultMode will be used. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.' type: integer format: int32 path: description: The relative path of the file to map the key to. May not be an absolute path. May not contain the path element '..'. May not start with the string '..'. type: string optional: description: Specify whether the Secret or its keys must be defined type: boolean secretName: description: 'Name of the secret in the pod''s namespace to use. More info: https://kubernetes.io/docs/concepts/storage/volumes#secret' type: string x-kubernetes-preserve-unknown-fields: true x-kubernetes-preserve-unknown-fields: true status: description: ConfigurationStatus communicates the observed state of the Configuration (from the controller). type: object properties: annotations: description: Annotations is additional Status fields for the Resource to save some additional State as well as convey more information to the user. This is roughly akin to Annotations on any k8s resource, just the reconciler conveying richer information outwards. type: object additionalProperties: type: string conditions: description: Conditions the latest available observations of a resource's current state. type: array items: description: 'Condition defines a readiness condition for a Knative resource. See: https://github.com/kubernetes/community/blob/master/contributors/devel/sig-architecture/api-conventions.md#typical-status-properties' type: object required: - status - type properties: lastTransitionTime: description: LastTransitionTime is the last time the condition transitioned from one status to another. We use VolatileTime in place of metav1.Time to exclude this from creating equality.Semantic differences (all other things held constant). type: string format: date-time message: description: A human readable message indicating details about the transition. type: string reason: description: The reason for the condition's last transition. type: string severity: description: Severity with which to treat failures of this type of condition. When this is not specified, it defaults to Error. type: string status: description: Status of the condition, one of True, False, Unknown. type: string type: description: Type of condition. type: string latestCreatedRevisionName: description: LatestCreatedRevisionName is the last revision that was created from this Configuration. It might not be ready yet, for that use LatestReadyRevisionName. type: string latestReadyRevisionName: description: LatestReadyRevisionName holds the name of the latest Revision stamped out from this Configuration that has had its "Ready" condition become "True". type: string observedGeneration: description: ObservedGeneration is the 'Generation' of the Service that was last processed by the controller. type: integer format: int64 --- # Copyright 2020 The Knative Authors # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # https://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. apiVersion: apiextensions.k8s.io/v1 kind: CustomResourceDefinition metadata: name: clusterdomainclaims.networking.internal.knative.dev labels: serving.knative.dev/release: "v0.26.2" knative.dev/crd-install: "true" spec: group: networking.internal.knative.dev versions: - name: v1alpha1 served: true storage: true subresources: status: {} schema: openAPIV3Schema: type: object # this is a work around so we don't need to flush out the # schema for each version at this time # # see issue: https://github.com/knative/serving/issues/912 x-kubernetes-preserve-unknown-fields: true names: kind: ClusterDomainClaim plural: clusterdomainclaims singular: clusterdomainclaim categories: - knative-internal - networking shortNames: - cdc scope: Cluster --- # Copyright 2020 The Knative Authors # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # https://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. apiVersion: apiextensions.k8s.io/v1 kind: CustomResourceDefinition metadata: name: domainmappings.serving.knative.dev labels: serving.knative.dev/release: "v0.26.2" knative.dev/crd-install: "true" spec: group: serving.knative.dev versions: - name: v1beta1 served: true storage: false subresources: status: {} additionalPrinterColumns: - name: URL type: string jsonPath: .status.url - name: Ready type: string jsonPath: ".status.conditions[?(@.type=='Ready')].status" - name: Reason type: string jsonPath: ".status.conditions[?(@.type=='Ready')].reason" "schema": "openAPIV3Schema": description: DomainMapping is a mapping from a custom hostname to an Addressable. type: object properties: apiVersion: description: 'APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' type: string kind: description: 'Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' type: string metadata: type: object spec: description: 'Spec is the desired state of the DomainMapping. More info: https://github.com/kubernetes/community/blob/master/contributors/devel/sig-architecture/api-conventions.md#spec-and-status' type: object required: - ref properties: ref: description: "Ref specifies the target of the Domain Mapping. \n The object identified by the Ref must be an Addressable with a URL of the form `{name}.{namespace}.{domain}` where `{domain}` is the cluster domain, and `{name}` and `{namespace}` are the name and namespace of a Kubernetes Service. \n This contract is satisfied by Knative types such as Knative Services and Knative Routes, and by Kubernetes Services." type: object required: - kind - name properties: apiVersion: description: API version of the referent. type: string group: description: 'Group of the API, without the version of the group. This can be used as an alternative to the APIVersion, and then resolved using ResolveGroup. Note: This API is EXPERIMENTAL and might break anytime. For more details: https://github.com/knative/eventing/issues/5086' type: string kind: description: 'Kind of the referent. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' type: string name: description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names' type: string namespace: description: 'Namespace of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/namespaces/ This is optional field, it gets defaulted to the object holding it if left out.' type: string tls: description: TLS allows the DomainMapping to terminate TLS traffic with an existing secret. type: object required: - secretName properties: secretName: description: SecretName is the name of the existing secret used to terminate TLS traffic. type: string status: description: 'Status is the current state of the DomainMapping. More info: https://github.com/kubernetes/community/blob/master/contributors/devel/sig-architecture/api-conventions.md#spec-and-status' type: object properties: address: description: Address holds the information needed for a DomainMapping to be the target of an event. type: object properties: url: type: string annotations: description: Annotations is additional Status fields for the Resource to save some additional State as well as convey more information to the user. This is roughly akin to Annotations on any k8s resource, just the reconciler conveying richer information outwards. type: object additionalProperties: type: string conditions: description: Conditions the latest available observations of a resource's current state. type: array items: description: 'Condition defines a readiness condition for a Knative resource. See: https://github.com/kubernetes/community/blob/master/contributors/devel/sig-architecture/api-conventions.md#typical-status-properties' type: object required: - status - type properties: lastTransitionTime: description: LastTransitionTime is the last time the condition transitioned from one status to another. We use VolatileTime in place of metav1.Time to exclude this from creating equality.Semantic differences (all other things held constant). type: string format: date-time message: description: A human readable message indicating details about the transition. type: string reason: description: The reason for the condition's last transition. type: string severity: description: Severity with which to treat failures of this type of condition. When this is not specified, it defaults to Error. type: string status: description: Status of the condition, one of True, False, Unknown. type: string type: description: Type of condition. type: string observedGeneration: description: ObservedGeneration is the 'Generation' of the Service that was last processed by the controller. type: integer format: int64 url: description: URL is the URL of this DomainMapping. type: string - name: v1alpha1 served: true storage: true subresources: status: {} schema: openAPIV3Schema: description: DomainMapping is a mapping from a custom hostname to an Addressable. type: object properties: apiVersion: description: 'APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' type: string kind: description: 'Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' type: string metadata: type: object spec: description: 'Spec is the desired state of the DomainMapping. More info: https://github.com/kubernetes/community/blob/master/contributors/devel/sig-architecture/api-conventions.md#spec-and-status' type: object required: - ref properties: ref: description: "Ref specifies the target of the Domain Mapping. \n The object identified by the Ref must be an Addressable with a URL of the form `{name}.{namespace}.{domain}` where `{domain}` is the cluster domain, and `{name}` and `{namespace}` are the name and namespace of a Kubernetes Service. \n This contract is satisfied by Knative types such as Knative Services and Knative Routes, and by Kubernetes Services." type: object required: - kind - name properties: apiVersion: description: API version of the referent. type: string group: description: 'Group of the API, without the version of the group. This can be used as an alternative to the APIVersion, and then resolved using ResolveGroup. Note: This API is EXPERIMENTAL and might break anytime. For more details: https://github.com/knative/eventing/issues/5086' type: string kind: description: 'Kind of the referent. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' type: string name: description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names' type: string namespace: description: 'Namespace of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/namespaces/ This is optional field, it gets defaulted to the object holding it if left out.' type: string tls: description: TLS allows the DomainMapping to terminate TLS traffic with an existing secret. type: object required: - secretName properties: secretName: description: SecretName is the name of the existing secret used to terminate TLS traffic. type: string status: description: 'Status is the current state of the DomainMapping. More info: https://github.com/kubernetes/community/blob/master/contributors/devel/sig-architecture/api-conventions.md#spec-and-status' type: object properties: address: description: Address holds the information needed for a DomainMapping to be the target of an event. type: object properties: url: type: string annotations: description: Annotations is additional Status fields for the Resource to save some additional State as well as convey more information to the user. This is roughly akin to Annotations on any k8s resource, just the reconciler conveying richer information outwards. type: object additionalProperties: type: string conditions: description: Conditions the latest available observations of a resource's current state. type: array items: description: 'Condition defines a readiness condition for a Knative resource. See: https://github.com/kubernetes/community/blob/master/contributors/devel/sig-architecture/api-conventions.md#typical-status-properties' type: object required: - status - type properties: lastTransitionTime: description: LastTransitionTime is the last time the condition transitioned from one status to another. We use VolatileTime in place of metav1.Time to exclude this from creating equality.Semantic differences (all other things held constant). type: string format: date-time message: description: A human readable message indicating details about the transition. type: string reason: description: The reason for the condition's last transition. type: string severity: description: Severity with which to treat failures of this type of condition. When this is not specified, it defaults to Error. type: string status: description: Status of the condition, one of True, False, Unknown. type: string type: description: Type of condition. type: string observedGeneration: description: ObservedGeneration is the 'Generation' of the Service that was last processed by the controller. type: integer format: int64 url: description: URL is the URL of this DomainMapping. type: string additionalPrinterColumns: - name: URL type: string jsonPath: .status.url - name: Ready type: string jsonPath: ".status.conditions[?(@.type=='Ready')].status" - name: Reason type: string jsonPath: ".status.conditions[?(@.type=='Ready')].reason" names: kind: DomainMapping plural: domainmappings singular: domainmapping categories: - all - knative - serving shortNames: - dm scope: Namespaced --- # Copyright 2020 The Knative Authors # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # https://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. apiVersion: apiextensions.k8s.io/v1 kind: CustomResourceDefinition metadata: name: ingresses.networking.internal.knative.dev labels: serving.knative.dev/release: "v0.26.2" knative.dev/crd-install: "true" spec: group: networking.internal.knative.dev versions: - name: v1alpha1 served: true storage: true subresources: status: {} schema: openAPIV3Schema: type: object # this is a work around so we don't need to flush out the # schema for each version at this time # # see issue: https://github.com/knative/serving/issues/912 x-kubernetes-preserve-unknown-fields: true additionalPrinterColumns: - name: Ready type: string jsonPath: ".status.conditions[?(@.type=='Ready')].status" - name: Reason type: string jsonPath: ".status.conditions[?(@.type=='Ready')].reason" names: kind: Ingress plural: ingresses singular: ingress categories: - knative-internal - networking shortNames: - kingress - king scope: Namespaced --- # Copyright 2019 The Knative Authors # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # https://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. # Note: The schema part of the spec is auto-generated by hack/update-schemas.sh. apiVersion: apiextensions.k8s.io/v1 kind: CustomResourceDefinition metadata: name: metrics.autoscaling.internal.knative.dev labels: serving.knative.dev/release: "v0.26.2" knative.dev/crd-install: "true" spec: group: autoscaling.internal.knative.dev names: kind: Metric plural: metrics singular: metric categories: - knative-internal - autoscaling scope: Namespaced versions: - name: v1alpha1 served: true storage: true subresources: status: {} additionalPrinterColumns: - name: Ready type: string jsonPath: ".status.conditions[?(@.type=='Ready')].status" - name: Reason type: string jsonPath: ".status.conditions[?(@.type=='Ready')].reason" schema: openAPIV3Schema: description: Metric represents a resource to configure the metric collector with. type: object properties: apiVersion: description: 'APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' type: string kind: description: 'Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' type: string metadata: type: object spec: description: Spec holds the desired state of the Metric (from the client). type: object required: - panicWindow - scrapeTarget - stableWindow properties: panicWindow: description: PanicWindow is the aggregation window for metrics where quick reactions are needed. type: integer format: int64 scrapeTarget: description: ScrapeTarget is the K8s service that publishes the metric endpoint. type: string stableWindow: description: StableWindow is the aggregation window for metrics in a stable state. type: integer format: int64 status: description: Status communicates the observed state of the Metric (from the controller). type: object properties: annotations: description: Annotations is additional Status fields for the Resource to save some additional State as well as convey more information to the user. This is roughly akin to Annotations on any k8s resource, just the reconciler conveying richer information outwards. type: object additionalProperties: type: string conditions: description: Conditions the latest available observations of a resource's current state. type: array items: description: 'Condition defines a readiness condition for a Knative resource. See: https://github.com/kubernetes/community/blob/master/contributors/devel/sig-architecture/api-conventions.md#typical-status-properties' type: object required: - status - type properties: lastTransitionTime: description: LastTransitionTime is the last time the condition transitioned from one status to another. We use VolatileTime in place of metav1.Time to exclude this from creating equality.Semantic differences (all other things held constant). type: string format: date-time message: description: A human readable message indicating details about the transition. type: string reason: description: The reason for the condition's last transition. type: string severity: description: Severity with which to treat failures of this type of condition. When this is not specified, it defaults to Error. type: string status: description: Status of the condition, one of True, False, Unknown. type: string type: description: Type of condition. type: string observedGeneration: description: ObservedGeneration is the 'Generation' of the Service that was last processed by the controller. type: integer format: int64 --- # Copyright 2018 The Knative Authors # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # https://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. # Note: The schema part of the spec is auto-generated by hack/update-schemas.sh. apiVersion: apiextensions.k8s.io/v1 kind: CustomResourceDefinition metadata: name: podautoscalers.autoscaling.internal.knative.dev labels: serving.knative.dev/release: "v0.26.2" knative.dev/crd-install: "true" spec: group: autoscaling.internal.knative.dev names: kind: PodAutoscaler plural: podautoscalers singular: podautoscaler categories: - knative-internal - autoscaling shortNames: - kpa - pa scope: Namespaced versions: - name: v1alpha1 served: true storage: true subresources: status: {} additionalPrinterColumns: - name: DesiredScale type: integer jsonPath: ".status.desiredScale" - name: ActualScale type: integer jsonPath: ".status.actualScale" - name: Ready type: string jsonPath: ".status.conditions[?(@.type=='Ready')].status" - name: Reason type: string jsonPath: ".status.conditions[?(@.type=='Ready')].reason" schema: openAPIV3Schema: description: 'PodAutoscaler is a Knative abstraction that encapsulates the interface by which Knative components instantiate autoscalers. This definition is an abstraction that may be backed by multiple definitions. For more information, see the Knative Pluggability presentation: https://docs.google.com/presentation/d/10KWynvAJYuOEWy69VBa6bHJVCqIsz1TNdEKosNvcpPY/edit' type: object properties: apiVersion: description: 'APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' type: string kind: description: 'Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' type: string metadata: type: object spec: description: Spec holds the desired state of the PodAutoscaler (from the client). type: object required: - protocolType - scaleTargetRef properties: containerConcurrency: description: ContainerConcurrency specifies the maximum allowed in-flight (concurrent) requests per container of the Revision. Defaults to `0` which means unlimited concurrency. type: integer format: int64 protocolType: description: The application-layer protocol. Matches `ProtocolType` inferred from the revision spec. type: string reachability: description: Reachability specifies whether or not the `ScaleTargetRef` can be reached (ie. has a route). Defaults to `ReachabilityUnknown` type: string scaleTargetRef: description: ScaleTargetRef defines the /scale-able resource that this PodAutoscaler is responsible for quickly right-sizing. type: object properties: apiVersion: description: API version of the referent. type: string kind: description: 'Kind of the referent. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' type: string name: description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names' type: string status: description: Status communicates the observed state of the PodAutoscaler (from the controller). type: object required: - metricsServiceName - serviceName properties: actualScale: description: ActualScale shows the actual number of replicas for the revision. type: integer format: int32 annotations: description: Annotations is additional Status fields for the Resource to save some additional State as well as convey more information to the user. This is roughly akin to Annotations on any k8s resource, just the reconciler conveying richer information outwards. type: object additionalProperties: type: string conditions: description: Conditions the latest available observations of a resource's current state. type: array items: description: 'Condition defines a readiness condition for a Knative resource. See: https://github.com/kubernetes/community/blob/master/contributors/devel/sig-architecture/api-conventions.md#typical-status-properties' type: object required: - status - type properties: lastTransitionTime: description: LastTransitionTime is the last time the condition transitioned from one status to another. We use VolatileTime in place of metav1.Time to exclude this from creating equality.Semantic differences (all other things held constant). type: string format: date-time message: description: A human readable message indicating details about the transition. type: string reason: description: The reason for the condition's last transition. type: string severity: description: Severity with which to treat failures of this type of condition. When this is not specified, it defaults to Error. type: string status: description: Status of the condition, one of True, False, Unknown. type: string type: description: Type of condition. type: string desiredScale: description: DesiredScale shows the current desired number of replicas for the revision. type: integer format: int32 metricsServiceName: description: MetricsServiceName is the K8s Service name that provides revision metrics. The service is managed by the PA object. type: string observedGeneration: description: ObservedGeneration is the 'Generation' of the Service that was last processed by the controller. type: integer format: int64 serviceName: description: ServiceName is the K8s Service name that serves the revision, scaled by this PA. The service is created and owned by the ServerlessService object owned by this PA. type: string --- # Copyright 2019 The Knative Authors # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # https://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. # Note: The schema part of the spec is auto-generated by hack/update-schemas.sh. apiVersion: apiextensions.k8s.io/v1 kind: CustomResourceDefinition metadata: name: revisions.serving.knative.dev labels: serving.knative.dev/release: "v0.26.2" knative.dev/crd-install: "true" spec: group: serving.knative.dev names: kind: Revision plural: revisions singular: revision categories: - all - knative - serving shortNames: - rev scope: Namespaced versions: - name: v1 served: true storage: true subresources: status: {} additionalPrinterColumns: - name: Config Name type: string jsonPath: ".metadata.labels['serving\\.knative\\.dev/configuration']" - name: K8s Service Name type: string jsonPath: ".status.serviceName" - name: Generation type: string # int in string form :( jsonPath: ".metadata.labels['serving\\.knative\\.dev/configurationGeneration']" - name: Ready type: string jsonPath: ".status.conditions[?(@.type=='Ready')].status" - name: Reason type: string jsonPath: ".status.conditions[?(@.type=='Ready')].reason" - name: Actual Replicas type: integer jsonPath: ".status.actualReplicas" - name: Desired Replicas type: integer jsonPath: ".status.desiredReplicas" schema: openAPIV3Schema: description: "Revision is an immutable snapshot of code and configuration. A revision references a container image. Revisions are created by updates to a Configuration. \n See also: https://github.com/knative/serving/blob/main/docs/spec/overview.md#revision" type: object properties: apiVersion: description: 'APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' type: string kind: description: 'Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' type: string metadata: type: object spec: description: RevisionSpec holds the desired state of the Revision (from the client). type: object required: - containers properties: automountServiceAccountToken: description: AutomountServiceAccountToken indicates whether a service account token should be automatically mounted. type: boolean containerConcurrency: description: ContainerConcurrency specifies the maximum allowed in-flight (concurrent) requests per container of the Revision. Defaults to `0` which means concurrency to the application is not limited, and the system decides the target concurrency for the autoscaler. type: integer format: int64 containers: description: List of containers belonging to the pod. Containers cannot currently be added or removed. There must be at least one container in a Pod. Cannot be updated. type: array items: description: A single application container that you want to run within a pod. type: object properties: args: description: 'Arguments to the entrypoint. The docker image''s CMD is used if this is not provided. Variable references $(VAR_NAME) are expanded using the container''s environment. If a variable cannot be resolved, the reference in the input string will be unchanged. The $(VAR_NAME) syntax can be escaped with a double $$, ie: $$(VAR_NAME). Escaped references will never be expanded, regardless of whether the variable exists or not. Cannot be updated. More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell' type: array items: type: string command: description: 'Entrypoint array. Not executed within a shell. The docker image''s ENTRYPOINT is used if this is not provided. Variable references $(VAR_NAME) are expanded using the container''s environment. If a variable cannot be resolved, the reference in the input string will be unchanged. The $(VAR_NAME) syntax can be escaped with a double $$, ie: $$(VAR_NAME). Escaped references will never be expanded, regardless of whether the variable exists or not. Cannot be updated. More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell' type: array items: type: string env: description: List of environment variables to set in the container. Cannot be updated. type: array items: description: EnvVar represents an environment variable present in a Container. type: object required: - name properties: name: description: Name of the environment variable. Must be a C_IDENTIFIER. type: string value: description: 'Variable references $(VAR_NAME) are expanded using the previous defined environment variables in the container and any service environment variables. If a variable cannot be resolved, the reference in the input string will be unchanged. The $(VAR_NAME) syntax can be escaped with a double $$, ie: $$(VAR_NAME). Escaped references will never be expanded, regardless of whether the variable exists or not. Defaults to "".' type: string valueFrom: description: Source for the environment variable's value. Cannot be used if value is not empty. type: object properties: configMapKeyRef: description: Selects a key of a ConfigMap. type: object required: - key properties: key: description: The key to select. type: string name: description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?' type: string optional: description: Specify whether the ConfigMap or its key must be defined type: boolean secretKeyRef: description: Selects a key of a secret in the pod's namespace type: object required: - key properties: key: description: The key of the secret to select from. Must be a valid secret key. type: string name: description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?' type: string optional: description: Specify whether the Secret or its key must be defined type: boolean x-kubernetes-preserve-unknown-fields: true envFrom: description: List of sources to populate environment variables in the container. The keys defined within a source must be a C_IDENTIFIER. All invalid keys will be reported as an event when the container is starting. When a key exists in multiple sources, the value associated with the last source will take precedence. Values defined by an Env with a duplicate key will take precedence. Cannot be updated. type: array items: description: EnvFromSource represents the source of a set of ConfigMaps type: object properties: configMapRef: description: The ConfigMap to select from type: object properties: name: description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?' type: string optional: description: Specify whether the ConfigMap must be defined type: boolean prefix: description: An optional identifier to prepend to each key in the ConfigMap. Must be a C_IDENTIFIER. type: string secretRef: description: The Secret to select from type: object properties: name: description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?' type: string optional: description: Specify whether the Secret must be defined type: boolean image: description: 'Docker image name. More info: https://kubernetes.io/docs/concepts/containers/images This field is optional to allow higher level config management to default or override container images in workload controllers like Deployments and StatefulSets.' type: string imagePullPolicy: description: 'Image pull policy. One of Always, Never, IfNotPresent. Defaults to Always if :latest tag is specified, or IfNotPresent otherwise. Cannot be updated. More info: https://kubernetes.io/docs/concepts/containers/images#updating-images' type: string livenessProbe: description: 'Periodic probe of container liveness. Container will be restarted if the probe fails. Cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes' type: object properties: exec: description: One and only one of the following should be specified. Exec specifies the action to take. type: object properties: command: description: Command is the command line to execute inside the container, the working directory for the command is root ('/') in the container's filesystem. The command is simply exec'd, it is not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use a shell, you need to explicitly call out to that shell. Exit status of 0 is treated as live/healthy and non-zero is unhealthy. type: array items: type: string failureThreshold: description: Minimum consecutive failures for the probe to be considered failed after having succeeded. Defaults to 3. Minimum value is 1. type: integer format: int32 httpGet: description: HTTPGet specifies the http request to perform. type: object properties: host: description: Host name to connect to, defaults to the pod IP. You probably want to set "Host" in httpHeaders instead. type: string httpHeaders: description: Custom headers to set in the request. HTTP allows repeated headers. type: array items: description: HTTPHeader describes a custom header to be used in HTTP probes type: object required: - name - value properties: name: description: The header field name type: string value: description: The header field value type: string path: description: Path to access on the HTTP server. type: string scheme: description: Scheme to use for connecting to the host. Defaults to HTTP. type: string x-kubernetes-preserve-unknown-fields: true initialDelaySeconds: description: 'Number of seconds after the container has started before liveness probes are initiated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes' type: integer format: int32 periodSeconds: description: How often (in seconds) to perform the probe. type: integer format: int32 successThreshold: description: Minimum consecutive successes for the probe to be considered successful after having failed. Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. type: integer format: int32 tcpSocket: description: 'TCPSocket specifies an action involving a TCP port. TCP hooks not yet supported TODO: implement a realistic TCP lifecycle hook' type: object properties: host: description: 'Optional: Host name to connect to, defaults to the pod IP.' type: string x-kubernetes-preserve-unknown-fields: true timeoutSeconds: description: 'Number of seconds after which the probe times out. Defaults to 1 second. Minimum value is 1. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes' type: integer format: int32 name: description: Name of the container specified as a DNS_LABEL. Each container in a pod must have a unique name (DNS_LABEL). Cannot be updated. type: string ports: description: List of ports to expose from the container. Exposing a port here gives the system additional information about the network connections a container uses, but is primarily informational. Not specifying a port here DOES NOT prevent that port from being exposed. Any port which is listening on the default "0.0.0.0" address inside a container will be accessible from the network. Cannot be updated. type: array items: description: ContainerPort represents a network port in a single container. type: object required: - containerPort properties: containerPort: description: Number of port to expose on the pod's IP address. This must be a valid port number, 0 < x < 65536. type: integer format: int32 name: description: If specified, this must be an IANA_SVC_NAME and unique within the pod. Each named port in a pod must have a unique name. Name for the port that can be referred to by services. type: string protocol: description: Protocol for port. Must be UDP, TCP, or SCTP. Defaults to "TCP". type: string default: TCP x-kubernetes-preserve-unknown-fields: true x-kubernetes-list-map-keys: - containerPort - protocol x-kubernetes-list-type: map readinessProbe: description: 'Periodic probe of container service readiness. Container will be removed from service endpoints if the probe fails. Cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes' type: object properties: exec: description: One and only one of the following should be specified. Exec specifies the action to take. type: object properties: command: description: Command is the command line to execute inside the container, the working directory for the command is root ('/') in the container's filesystem. The command is simply exec'd, it is not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use a shell, you need to explicitly call out to that shell. Exit status of 0 is treated as live/healthy and non-zero is unhealthy. type: array items: type: string failureThreshold: description: Minimum consecutive failures for the probe to be considered failed after having succeeded. Defaults to 3. Minimum value is 1. type: integer format: int32 httpGet: description: HTTPGet specifies the http request to perform. type: object properties: host: description: Host name to connect to, defaults to the pod IP. You probably want to set "Host" in httpHeaders instead. type: string httpHeaders: description: Custom headers to set in the request. HTTP allows repeated headers. type: array items: description: HTTPHeader describes a custom header to be used in HTTP probes type: object required: - name - value properties: name: description: The header field name type: string value: description: The header field value type: string path: description: Path to access on the HTTP server. type: string scheme: description: Scheme to use for connecting to the host. Defaults to HTTP. type: string x-kubernetes-preserve-unknown-fields: true initialDelaySeconds: description: 'Number of seconds after the container has started before liveness probes are initiated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes' type: integer format: int32 periodSeconds: description: How often (in seconds) to perform the probe. type: integer format: int32 successThreshold: description: Minimum consecutive successes for the probe to be considered successful after having failed. Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. type: integer format: int32 tcpSocket: description: 'TCPSocket specifies an action involving a TCP port. TCP hooks not yet supported TODO: implement a realistic TCP lifecycle hook' type: object properties: host: description: 'Optional: Host name to connect to, defaults to the pod IP.' type: string x-kubernetes-preserve-unknown-fields: true timeoutSeconds: description: 'Number of seconds after which the probe times out. Defaults to 1 second. Minimum value is 1. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes' type: integer format: int32 resources: description: 'Compute Resources required by this container. Cannot be updated. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/' type: object properties: limits: description: 'Limits describes the maximum amount of compute resources allowed. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/' type: object additionalProperties: pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ anyOf: - type: integer - type: string x-kubernetes-int-or-string: true requests: description: 'Requests describes the minimum amount of compute resources required. If Requests is omitted for a container, it defaults to Limits if that is explicitly specified, otherwise to an implementation-defined value. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/' type: object additionalProperties: pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ anyOf: - type: integer - type: string x-kubernetes-int-or-string: true securityContext: description: 'Security options the pod should run with. More info: https://kubernetes.io/docs/concepts/policy/security-context/ More info: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/' type: object properties: capabilities: description: The capabilities to add/drop when running containers. Defaults to the default set of capabilities granted by the container runtime. type: object properties: drop: description: Removed capabilities type: array items: description: Capability represent POSIX capabilities type type: string x-kubernetes-preserve-unknown-fields: true readOnlyRootFilesystem: description: Whether this container has a read-only root filesystem. Default is false. type: boolean runAsUser: description: The UID to run the entrypoint of the container process. Defaults to user specified in image metadata if unspecified. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. type: integer format: int64 x-kubernetes-preserve-unknown-fields: true terminationMessagePath: description: 'Optional: Path at which the file to which the container''s termination message will be written is mounted into the container''s filesystem. Message written is intended to be brief final status, such as an assertion failure message. Will be truncated by the node if greater than 4096 bytes. The total message length across all containers will be limited to 12kb. Defaults to /dev/termination-log. Cannot be updated.' type: string terminationMessagePolicy: description: Indicate how the termination message should be populated. File will use the contents of terminationMessagePath to populate the container status message on both success and failure. FallbackToLogsOnError will use the last chunk of container log output if the termination message file is empty and the container exited with an error. The log output is limited to 2048 bytes or 80 lines, whichever is smaller. Defaults to File. Cannot be updated. type: string volumeMounts: description: Pod volumes to mount into the container's filesystem. Cannot be updated. type: array items: description: VolumeMount describes a mounting of a Volume within a container. type: object required: - mountPath - name properties: mountPath: description: Path within the container at which the volume should be mounted. Must not contain ':'. type: string name: description: This must match the Name of a Volume. type: string readOnly: description: Mounted read-only if true, read-write otherwise (false or unspecified). Defaults to false. type: boolean subPath: description: Path within the volume from which the container's volume should be mounted. Defaults to "" (volume's root). type: string workingDir: description: Container's working directory. If not specified, the container runtime's default will be used, which might be configured in the container image. Cannot be updated. type: string x-kubernetes-preserve-unknown-fields: true enableServiceLinks: description: 'EnableServiceLinks indicates whether information about services should be injected into pod''s environment variables, matching the syntax of Docker links. Optional: Defaults to true.' type: boolean imagePullSecrets: description: 'ImagePullSecrets is an optional list of references to secrets in the same namespace to use for pulling any of the images used by this PodSpec. If specified, these secrets will be passed to individual puller implementations for them to use. For example, in the case of docker, only DockerConfig type secrets are honored. More info: https://kubernetes.io/docs/concepts/containers/images#specifying-imagepullsecrets-on-a-pod' type: array items: description: LocalObjectReference contains enough information to let you locate the referenced object inside the same namespace. type: object properties: name: description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?' type: string serviceAccountName: description: 'ServiceAccountName is the name of the ServiceAccount to use to run this pod. More info: https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/' type: string timeoutSeconds: description: TimeoutSeconds is the maximum duration in seconds that the request routing layer will wait for a request delivered to a container to begin replying (send network traffic). If unspecified, a system default will be provided. type: integer format: int64 volumes: description: 'List of volumes that can be mounted by containers belonging to the pod. More info: https://kubernetes.io/docs/concepts/storage/volumes' type: array items: description: Volume represents a named volume in a pod that may be accessed by any container in the pod. type: object required: - name properties: configMap: description: ConfigMap represents a configMap that should populate this volume type: object properties: defaultMode: description: 'Optional: mode bits used to set permissions on created files by default. Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. Defaults to 0644. Directories within the path are not affected by this setting. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.' type: integer format: int32 items: description: If unspecified, each key-value pair in the Data field of the referenced ConfigMap will be projected into the volume as a file whose name is the key and content is the value. If specified, the listed keys will be projected into the specified paths, and unlisted keys will not be present. If a key is specified which is not present in the ConfigMap, the volume setup will error unless it is marked optional. Paths must be relative and may not contain the '..' path or start with '..'. type: array items: description: Maps a string key to a path within a volume. type: object required: - key - path properties: key: description: The key to project. type: string mode: description: 'Optional: mode bits used to set permissions on this file. Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. If not specified, the volume defaultMode will be used. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.' type: integer format: int32 path: description: The relative path of the file to map the key to. May not be an absolute path. May not contain the path element '..'. May not start with the string '..'. type: string name: description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?' type: string optional: description: Specify whether the ConfigMap or its keys must be defined type: boolean name: description: 'Volume''s name. Must be a DNS_LABEL and unique within the pod. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names' type: string projected: description: Items for all in one resources secrets, configmaps, and downward API type: object properties: defaultMode: description: Mode bits used to set permissions on created files by default. Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. Directories within the path are not affected by this setting. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set. type: integer format: int32 sources: description: list of volume projections type: array items: description: Projection that may be projected along with other supported volume types type: object properties: configMap: description: information about the configMap data to project type: object properties: items: description: If unspecified, each key-value pair in the Data field of the referenced ConfigMap will be projected into the volume as a file whose name is the key and content is the value. If specified, the listed keys will be projected into the specified paths, and unlisted keys will not be present. If a key is specified which is not present in the ConfigMap, the volume setup will error unless it is marked optional. Paths must be relative and may not contain the '..' path or start with '..'. type: array items: description: Maps a string key to a path within a volume. type: object required: - key - path properties: key: description: The key to project. type: string mode: description: 'Optional: mode bits used to set permissions on this file. Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. If not specified, the volume defaultMode will be used. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.' type: integer format: int32 path: description: The relative path of the file to map the key to. May not be an absolute path. May not contain the path element '..'. May not start with the string '..'. type: string name: description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?' type: string optional: description: Specify whether the ConfigMap or its keys must be defined type: boolean secret: description: information about the secret data to project type: object properties: items: description: If unspecified, each key-value pair in the Data field of the referenced Secret will be projected into the volume as a file whose name is the key and content is the value. If specified, the listed keys will be projected into the specified paths, and unlisted keys will not be present. If a key is specified which is not present in the Secret, the volume setup will error unless it is marked optional. Paths must be relative and may not contain the '..' path or start with '..'. type: array items: description: Maps a string key to a path within a volume. type: object required: - key - path properties: key: description: The key to project. type: string mode: description: 'Optional: mode bits used to set permissions on this file. Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. If not specified, the volume defaultMode will be used. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.' type: integer format: int32 path: description: The relative path of the file to map the key to. May not be an absolute path. May not contain the path element '..'. May not start with the string '..'. type: string name: description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?' type: string optional: description: Specify whether the Secret or its key must be defined type: boolean serviceAccountToken: description: information about the serviceAccountToken data to project type: object required: - path properties: audience: description: Audience is the intended audience of the token. A recipient of a token must identify itself with an identifier specified in the audience of the token, and otherwise should reject the token. The audience defaults to the identifier of the apiserver. type: string expirationSeconds: description: ExpirationSeconds is the requested duration of validity of the service account token. As the token approaches expiration, the kubelet volume plugin will proactively rotate the service account token. The kubelet will start trying to rotate the token if the token is older than 80 percent of its time to live or if the token is older than 24 hours.Defaults to 1 hour and must be at least 10 minutes. type: integer format: int64 path: description: Path is the path relative to the mount point of the file to project the token into. type: string secret: description: 'Secret represents a secret that should populate this volume. More info: https://kubernetes.io/docs/concepts/storage/volumes#secret' type: object properties: defaultMode: description: 'Optional: mode bits used to set permissions on created files by default. Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. Defaults to 0644. Directories within the path are not affected by this setting. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.' type: integer format: int32 items: description: If unspecified, each key-value pair in the Data field of the referenced Secret will be projected into the volume as a file whose name is the key and content is the value. If specified, the listed keys will be projected into the specified paths, and unlisted keys will not be present. If a key is specified which is not present in the Secret, the volume setup will error unless it is marked optional. Paths must be relative and may not contain the '..' path or start with '..'. type: array items: description: Maps a string key to a path within a volume. type: object required: - key - path properties: key: description: The key to project. type: string mode: description: 'Optional: mode bits used to set permissions on this file. Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. If not specified, the volume defaultMode will be used. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.' type: integer format: int32 path: description: The relative path of the file to map the key to. May not be an absolute path. May not contain the path element '..'. May not start with the string '..'. type: string optional: description: Specify whether the Secret or its keys must be defined type: boolean secretName: description: 'Name of the secret in the pod''s namespace to use. More info: https://kubernetes.io/docs/concepts/storage/volumes#secret' type: string x-kubernetes-preserve-unknown-fields: true x-kubernetes-preserve-unknown-fields: true status: description: RevisionStatus communicates the observed state of the Revision (from the controller). type: object properties: actualReplicas: description: ActualReplicas reflects the amount of ready pods running this revision. type: integer format: int32 annotations: description: Annotations is additional Status fields for the Resource to save some additional State as well as convey more information to the user. This is roughly akin to Annotations on any k8s resource, just the reconciler conveying richer information outwards. type: object additionalProperties: type: string conditions: description: Conditions the latest available observations of a resource's current state. type: array items: description: 'Condition defines a readiness condition for a Knative resource. See: https://github.com/kubernetes/community/blob/master/contributors/devel/sig-architecture/api-conventions.md#typical-status-properties' type: object required: - status - type properties: lastTransitionTime: description: LastTransitionTime is the last time the condition transitioned from one status to another. We use VolatileTime in place of metav1.Time to exclude this from creating equality.Semantic differences (all other things held constant). type: string format: date-time message: description: A human readable message indicating details about the transition. type: string reason: description: The reason for the condition's last transition. type: string severity: description: Severity with which to treat failures of this type of condition. When this is not specified, it defaults to Error. type: string status: description: Status of the condition, one of True, False, Unknown. type: string type: description: Type of condition. type: string containerStatuses: description: 'ContainerStatuses is a slice of images present in .Spec.Container[*].Image to their respective digests and their container name. The digests are resolved during the creation of Revision. ContainerStatuses holds the container name and image digests for both serving and non serving containers. ref: http://bit.ly/image-digests' type: array items: description: ContainerStatus holds the information of container name and image digest value type: object properties: imageDigest: type: string name: type: string desiredReplicas: description: DesiredReplicas reflects the desired amount of pods running this revision. type: integer format: int32 logUrl: description: LogURL specifies the generated logging url for this particular revision based on the revision url template specified in the controller's config. type: string observedGeneration: description: ObservedGeneration is the 'Generation' of the Service that was last processed by the controller. type: integer format: int64 --- # Copyright 2019 The Knative Authors # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # https://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. # Note: The schema part of the spec is auto-generated by hack/update-schemas.sh. apiVersion: apiextensions.k8s.io/v1 kind: CustomResourceDefinition metadata: name: routes.serving.knative.dev labels: serving.knative.dev/release: "v0.26.2" knative.dev/crd-install: "true" duck.knative.dev/addressable: "true" spec: group: serving.knative.dev names: kind: Route plural: routes singular: route categories: - all - knative - serving shortNames: - rt scope: Namespaced versions: - name: v1 served: true storage: true subresources: status: {} additionalPrinterColumns: - name: URL type: string jsonPath: .status.url - name: Ready type: string jsonPath: ".status.conditions[?(@.type=='Ready')].status" - name: Reason type: string jsonPath: ".status.conditions[?(@.type=='Ready')].reason" schema: openAPIV3Schema: description: 'Route is responsible for configuring ingress over a collection of Revisions. Some of the Revisions a Route distributes traffic over may be specified by referencing the Configuration responsible for creating them; in these cases the Route is additionally responsible for monitoring the Configuration for "latest ready revision" changes, and smoothly rolling out latest revisions. See also: https://github.com/knative/serving/blob/main/docs/spec/overview.md#route' type: object properties: apiVersion: description: 'APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' type: string kind: description: 'Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' type: string metadata: type: object spec: description: Spec holds the desired state of the Route (from the client). type: object properties: traffic: description: Traffic specifies how to distribute traffic over a collection of revisions and configurations. type: array items: description: TrafficTarget holds a single entry of the routing table for a Route. type: object properties: configurationName: description: ConfigurationName of a configuration to whose latest revision we will send this portion of traffic. When the "status.latestReadyRevisionName" of the referenced configuration changes, we will automatically migrate traffic from the prior "latest ready" revision to the new one. This field is never set in Route's status, only its spec. This is mutually exclusive with RevisionName. type: string latestRevision: description: LatestRevision may be optionally provided to indicate that the latest ready Revision of the Configuration should be used for this traffic target. When provided LatestRevision must be true if RevisionName is empty; it must be false when RevisionName is non-empty. type: boolean percent: description: 'Percent indicates that percentage based routing should be used and the value indicates the percent of traffic that is be routed to this Revision or Configuration. `0` (zero) mean no traffic, `100` means all traffic. When percentage based routing is being used the follow rules apply: - the sum of all percent values must equal 100 - when not specified, the implied value for `percent` is zero for that particular Revision or Configuration' type: integer format: int64 revisionName: description: RevisionName of a specific revision to which to send this portion of traffic. This is mutually exclusive with ConfigurationName. type: string tag: description: Tag is optionally used to expose a dedicated url for referencing this target exclusively. type: string url: description: URL displays the URL for accessing named traffic targets. URL is displayed in status, and is disallowed on spec. URL must contain a scheme (e.g. http://) and a hostname, but may not contain anything else (e.g. basic auth, url path, etc.) type: string status: description: Status communicates the observed state of the Route (from the controller). type: object properties: address: description: Address holds the information needed for a Route to be the target of an event. type: object properties: url: type: string annotations: description: Annotations is additional Status fields for the Resource to save some additional State as well as convey more information to the user. This is roughly akin to Annotations on any k8s resource, just the reconciler conveying richer information outwards. type: object additionalProperties: type: string conditions: description: Conditions the latest available observations of a resource's current state. type: array items: description: 'Condition defines a readiness condition for a Knative resource. See: https://github.com/kubernetes/community/blob/master/contributors/devel/sig-architecture/api-conventions.md#typical-status-properties' type: object required: - status - type properties: lastTransitionTime: description: LastTransitionTime is the last time the condition transitioned from one status to another. We use VolatileTime in place of metav1.Time to exclude this from creating equality.Semantic differences (all other things held constant). type: string format: date-time message: description: A human readable message indicating details about the transition. type: string reason: description: The reason for the condition's last transition. type: string severity: description: Severity with which to treat failures of this type of condition. When this is not specified, it defaults to Error. type: string status: description: Status of the condition, one of True, False, Unknown. type: string type: description: Type of condition. type: string observedGeneration: description: ObservedGeneration is the 'Generation' of the Service that was last processed by the controller. type: integer format: int64 traffic: description: Traffic holds the configured traffic distribution. These entries will always contain RevisionName references. When ConfigurationName appears in the spec, this will hold the LatestReadyRevisionName that we last observed. type: array items: description: TrafficTarget holds a single entry of the routing table for a Route. type: object properties: configurationName: description: ConfigurationName of a configuration to whose latest revision we will send this portion of traffic. When the "status.latestReadyRevisionName" of the referenced configuration changes, we will automatically migrate traffic from the prior "latest ready" revision to the new one. This field is never set in Route's status, only its spec. This is mutually exclusive with RevisionName. type: string latestRevision: description: LatestRevision may be optionally provided to indicate that the latest ready Revision of the Configuration should be used for this traffic target. When provided LatestRevision must be true if RevisionName is empty; it must be false when RevisionName is non-empty. type: boolean percent: description: 'Percent indicates that percentage based routing should be used and the value indicates the percent of traffic that is be routed to this Revision or Configuration. `0` (zero) mean no traffic, `100` means all traffic. When percentage based routing is being used the follow rules apply: - the sum of all percent values must equal 100 - when not specified, the implied value for `percent` is zero for that particular Revision or Configuration' type: integer format: int64 revisionName: description: RevisionName of a specific revision to which to send this portion of traffic. This is mutually exclusive with ConfigurationName. type: string tag: description: Tag is optionally used to expose a dedicated url for referencing this target exclusively. type: string url: description: URL displays the URL for accessing named traffic targets. URL is displayed in status, and is disallowed on spec. URL must contain a scheme (e.g. http://) and a hostname, but may not contain anything else (e.g. basic auth, url path, etc.) type: string url: description: URL holds the url that will distribute traffic over the provided traffic targets. It generally has the form http[s]://{route-name}.{route-namespace}.{cluster-level-suffix} type: string --- # Copyright 2019 The Knative Authors # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # https://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. apiVersion: apiextensions.k8s.io/v1 kind: CustomResourceDefinition metadata: name: serverlessservices.networking.internal.knative.dev labels: serving.knative.dev/release: "v0.26.2" knative.dev/crd-install: "true" spec: group: networking.internal.knative.dev versions: - name: v1alpha1 served: true storage: true subresources: status: {} schema: openAPIV3Schema: type: object # this is a work around so we don't need to flush out the # schema for each version at this time # # see issue: https://github.com/knative/serving/issues/912 x-kubernetes-preserve-unknown-fields: true additionalPrinterColumns: - name: Mode type: string jsonPath: ".spec.mode" - name: Activators type: integer jsonPath: ".spec.numActivators" - name: ServiceName type: string jsonPath: ".status.serviceName" - name: PrivateServiceName type: string jsonPath: ".status.privateServiceName" - name: Ready type: string jsonPath: ".status.conditions[?(@.type=='Ready')].status" - name: Reason type: string jsonPath: ".status.conditions[?(@.type=='Ready')].reason" names: kind: ServerlessService plural: serverlessservices singular: serverlessservice categories: - knative-internal - networking shortNames: - sks scope: Namespaced --- # Copyright 2019 The Knative Authors # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # https://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. # Note: The schema part of the spec is auto-generated by hack/update-schemas.sh. apiVersion: apiextensions.k8s.io/v1 kind: CustomResourceDefinition metadata: name: services.serving.knative.dev labels: serving.knative.dev/release: "v0.26.2" knative.dev/crd-install: "true" duck.knative.dev/addressable: "true" duck.knative.dev/podspecable: "true" spec: group: serving.knative.dev names: kind: Service plural: services singular: service categories: - all - knative - serving shortNames: - kservice - ksvc scope: Namespaced versions: - name: v1 served: true storage: true subresources: status: {} additionalPrinterColumns: - name: URL type: string jsonPath: .status.url - name: LatestCreated type: string jsonPath: .status.latestCreatedRevisionName - name: LatestReady type: string jsonPath: .status.latestReadyRevisionName - name: Ready type: string jsonPath: ".status.conditions[?(@.type=='Ready')].status" - name: Reason type: string jsonPath: ".status.conditions[?(@.type=='Ready')].reason" schema: openAPIV3Schema: description: "Service acts as a top-level container that manages a Route and Configuration which implement a network service. Service exists to provide a singular abstraction which can be access controlled, reasoned about, and which encapsulates software lifecycle decisions such as rollout policy and team resource ownership. Service acts only as an orchestrator of the underlying Routes and Configurations (much as a kubernetes Deployment orchestrates ReplicaSets), and its usage is optional but recommended. \n The Service's controller will track the statuses of its owned Configuration and Route, reflecting their statuses and conditions as its own. \n See also: https://github.com/knative/serving/blob/main/docs/spec/overview.md#service" type: object properties: apiVersion: description: 'APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' type: string kind: description: 'Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' type: string metadata: type: object spec: description: ServiceSpec represents the configuration for the Service object. A Service's specification is the union of the specifications for a Route and Configuration. The Service restricts what can be expressed in these fields, e.g. the Route must reference the provided Configuration; however, these limitations also enable friendlier defaulting, e.g. Route never needs a Configuration name, and may be defaulted to the appropriate "run latest" spec. type: object properties: template: description: Template holds the latest specification for the Revision to be stamped out. type: object properties: metadata: type: object properties: annotations: type: object additionalProperties: type: string finalizers: type: array items: type: string labels: type: object additionalProperties: type: string name: type: string namespace: type: string x-kubernetes-preserve-unknown-fields: true spec: description: RevisionSpec holds the desired state of the Revision (from the client). type: object required: - containers properties: automountServiceAccountToken: description: AutomountServiceAccountToken indicates whether a service account token should be automatically mounted. type: boolean containerConcurrency: description: ContainerConcurrency specifies the maximum allowed in-flight (concurrent) requests per container of the Revision. Defaults to `0` which means concurrency to the application is not limited, and the system decides the target concurrency for the autoscaler. type: integer format: int64 containers: description: List of containers belonging to the pod. Containers cannot currently be added or removed. There must be at least one container in a Pod. Cannot be updated. type: array items: description: A single application container that you want to run within a pod. type: object properties: args: description: 'Arguments to the entrypoint. The docker image''s CMD is used if this is not provided. Variable references $(VAR_NAME) are expanded using the container''s environment. If a variable cannot be resolved, the reference in the input string will be unchanged. The $(VAR_NAME) syntax can be escaped with a double $$, ie: $$(VAR_NAME). Escaped references will never be expanded, regardless of whether the variable exists or not. Cannot be updated. More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell' type: array items: type: string command: description: 'Entrypoint array. Not executed within a shell. The docker image''s ENTRYPOINT is used if this is not provided. Variable references $(VAR_NAME) are expanded using the container''s environment. If a variable cannot be resolved, the reference in the input string will be unchanged. The $(VAR_NAME) syntax can be escaped with a double $$, ie: $$(VAR_NAME). Escaped references will never be expanded, regardless of whether the variable exists or not. Cannot be updated. More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell' type: array items: type: string env: description: List of environment variables to set in the container. Cannot be updated. type: array items: description: EnvVar represents an environment variable present in a Container. type: object required: - name properties: name: description: Name of the environment variable. Must be a C_IDENTIFIER. type: string value: description: 'Variable references $(VAR_NAME) are expanded using the previous defined environment variables in the container and any service environment variables. If a variable cannot be resolved, the reference in the input string will be unchanged. The $(VAR_NAME) syntax can be escaped with a double $$, ie: $$(VAR_NAME). Escaped references will never be expanded, regardless of whether the variable exists or not. Defaults to "".' type: string valueFrom: description: Source for the environment variable's value. Cannot be used if value is not empty. type: object properties: configMapKeyRef: description: Selects a key of a ConfigMap. type: object required: - key properties: key: description: The key to select. type: string name: description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?' type: string optional: description: Specify whether the ConfigMap or its key must be defined type: boolean secretKeyRef: description: Selects a key of a secret in the pod's namespace type: object required: - key properties: key: description: The key of the secret to select from. Must be a valid secret key. type: string name: description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?' type: string optional: description: Specify whether the Secret or its key must be defined type: boolean x-kubernetes-preserve-unknown-fields: true envFrom: description: List of sources to populate environment variables in the container. The keys defined within a source must be a C_IDENTIFIER. All invalid keys will be reported as an event when the container is starting. When a key exists in multiple sources, the value associated with the last source will take precedence. Values defined by an Env with a duplicate key will take precedence. Cannot be updated. type: array items: description: EnvFromSource represents the source of a set of ConfigMaps type: object properties: configMapRef: description: The ConfigMap to select from type: object properties: name: description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?' type: string optional: description: Specify whether the ConfigMap must be defined type: boolean prefix: description: An optional identifier to prepend to each key in the ConfigMap. Must be a C_IDENTIFIER. type: string secretRef: description: The Secret to select from type: object properties: name: description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?' type: string optional: description: Specify whether the Secret must be defined type: boolean image: description: 'Docker image name. More info: https://kubernetes.io/docs/concepts/containers/images This field is optional to allow higher level config management to default or override container images in workload controllers like Deployments and StatefulSets.' type: string imagePullPolicy: description: 'Image pull policy. One of Always, Never, IfNotPresent. Defaults to Always if :latest tag is specified, or IfNotPresent otherwise. Cannot be updated. More info: https://kubernetes.io/docs/concepts/containers/images#updating-images' type: string livenessProbe: description: 'Periodic probe of container liveness. Container will be restarted if the probe fails. Cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes' type: object properties: exec: description: One and only one of the following should be specified. Exec specifies the action to take. type: object properties: command: description: Command is the command line to execute inside the container, the working directory for the command is root ('/') in the container's filesystem. The command is simply exec'd, it is not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use a shell, you need to explicitly call out to that shell. Exit status of 0 is treated as live/healthy and non-zero is unhealthy. type: array items: type: string failureThreshold: description: Minimum consecutive failures for the probe to be considered failed after having succeeded. Defaults to 3. Minimum value is 1. type: integer format: int32 httpGet: description: HTTPGet specifies the http request to perform. type: object properties: host: description: Host name to connect to, defaults to the pod IP. You probably want to set "Host" in httpHeaders instead. type: string httpHeaders: description: Custom headers to set in the request. HTTP allows repeated headers. type: array items: description: HTTPHeader describes a custom header to be used in HTTP probes type: object required: - name - value properties: name: description: The header field name type: string value: description: The header field value type: string path: description: Path to access on the HTTP server. type: string scheme: description: Scheme to use for connecting to the host. Defaults to HTTP. type: string x-kubernetes-preserve-unknown-fields: true initialDelaySeconds: description: 'Number of seconds after the container has started before liveness probes are initiated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes' type: integer format: int32 periodSeconds: description: How often (in seconds) to perform the probe. type: integer format: int32 successThreshold: description: Minimum consecutive successes for the probe to be considered successful after having failed. Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. type: integer format: int32 tcpSocket: description: 'TCPSocket specifies an action involving a TCP port. TCP hooks not yet supported TODO: implement a realistic TCP lifecycle hook' type: object properties: host: description: 'Optional: Host name to connect to, defaults to the pod IP.' type: string x-kubernetes-preserve-unknown-fields: true timeoutSeconds: description: 'Number of seconds after which the probe times out. Defaults to 1 second. Minimum value is 1. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes' type: integer format: int32 name: description: Name of the container specified as a DNS_LABEL. Each container in a pod must have a unique name (DNS_LABEL). Cannot be updated. type: string ports: description: List of ports to expose from the container. Exposing a port here gives the system additional information about the network connections a container uses, but is primarily informational. Not specifying a port here DOES NOT prevent that port from being exposed. Any port which is listening on the default "0.0.0.0" address inside a container will be accessible from the network. Cannot be updated. type: array items: description: ContainerPort represents a network port in a single container. type: object required: - containerPort properties: containerPort: description: Number of port to expose on the pod's IP address. This must be a valid port number, 0 < x < 65536. type: integer format: int32 name: description: If specified, this must be an IANA_SVC_NAME and unique within the pod. Each named port in a pod must have a unique name. Name for the port that can be referred to by services. type: string protocol: description: Protocol for port. Must be UDP, TCP, or SCTP. Defaults to "TCP". type: string default: TCP x-kubernetes-preserve-unknown-fields: true x-kubernetes-list-map-keys: - containerPort - protocol x-kubernetes-list-type: map readinessProbe: description: 'Periodic probe of container service readiness. Container will be removed from service endpoints if the probe fails. Cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes' type: object properties: exec: description: One and only one of the following should be specified. Exec specifies the action to take. type: object properties: command: description: Command is the command line to execute inside the container, the working directory for the command is root ('/') in the container's filesystem. The command is simply exec'd, it is not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use a shell, you need to explicitly call out to that shell. Exit status of 0 is treated as live/healthy and non-zero is unhealthy. type: array items: type: string failureThreshold: description: Minimum consecutive failures for the probe to be considered failed after having succeeded. Defaults to 3. Minimum value is 1. type: integer format: int32 httpGet: description: HTTPGet specifies the http request to perform. type: object properties: host: description: Host name to connect to, defaults to the pod IP. You probably want to set "Host" in httpHeaders instead. type: string httpHeaders: description: Custom headers to set in the request. HTTP allows repeated headers. type: array items: description: HTTPHeader describes a custom header to be used in HTTP probes type: object required: - name - value properties: name: description: The header field name type: string value: description: The header field value type: string path: description: Path to access on the HTTP server. type: string scheme: description: Scheme to use for connecting to the host. Defaults to HTTP. type: string x-kubernetes-preserve-unknown-fields: true initialDelaySeconds: description: 'Number of seconds after the container has started before liveness probes are initiated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes' type: integer format: int32 periodSeconds: description: How often (in seconds) to perform the probe. type: integer format: int32 successThreshold: description: Minimum consecutive successes for the probe to be considered successful after having failed. Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. type: integer format: int32 tcpSocket: description: 'TCPSocket specifies an action involving a TCP port. TCP hooks not yet supported TODO: implement a realistic TCP lifecycle hook' type: object properties: host: description: 'Optional: Host name to connect to, defaults to the pod IP.' type: string x-kubernetes-preserve-unknown-fields: true timeoutSeconds: description: 'Number of seconds after which the probe times out. Defaults to 1 second. Minimum value is 1. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes' type: integer format: int32 resources: description: 'Compute Resources required by this container. Cannot be updated. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/' type: object properties: limits: description: 'Limits describes the maximum amount of compute resources allowed. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/' type: object additionalProperties: pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ anyOf: - type: integer - type: string x-kubernetes-int-or-string: true requests: description: 'Requests describes the minimum amount of compute resources required. If Requests is omitted for a container, it defaults to Limits if that is explicitly specified, otherwise to an implementation-defined value. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/' type: object additionalProperties: pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ anyOf: - type: integer - type: string x-kubernetes-int-or-string: true securityContext: description: 'Security options the pod should run with. More info: https://kubernetes.io/docs/concepts/policy/security-context/ More info: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/' type: object properties: capabilities: description: The capabilities to add/drop when running containers. Defaults to the default set of capabilities granted by the container runtime. type: object properties: drop: description: Removed capabilities type: array items: description: Capability represent POSIX capabilities type type: string x-kubernetes-preserve-unknown-fields: true readOnlyRootFilesystem: description: Whether this container has a read-only root filesystem. Default is false. type: boolean runAsUser: description: The UID to run the entrypoint of the container process. Defaults to user specified in image metadata if unspecified. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. type: integer format: int64 x-kubernetes-preserve-unknown-fields: true terminationMessagePath: description: 'Optional: Path at which the file to which the container''s termination message will be written is mounted into the container''s filesystem. Message written is intended to be brief final status, such as an assertion failure message. Will be truncated by the node if greater than 4096 bytes. The total message length across all containers will be limited to 12kb. Defaults to /dev/termination-log. Cannot be updated.' type: string terminationMessagePolicy: description: Indicate how the termination message should be populated. File will use the contents of terminationMessagePath to populate the container status message on both success and failure. FallbackToLogsOnError will use the last chunk of container log output if the termination message file is empty and the container exited with an error. The log output is limited to 2048 bytes or 80 lines, whichever is smaller. Defaults to File. Cannot be updated. type: string volumeMounts: description: Pod volumes to mount into the container's filesystem. Cannot be updated. type: array items: description: VolumeMount describes a mounting of a Volume within a container. type: object required: - mountPath - name properties: mountPath: description: Path within the container at which the volume should be mounted. Must not contain ':'. type: string name: description: This must match the Name of a Volume. type: string readOnly: description: Mounted read-only if true, read-write otherwise (false or unspecified). Defaults to false. type: boolean subPath: description: Path within the volume from which the container's volume should be mounted. Defaults to "" (volume's root). type: string workingDir: description: Container's working directory. If not specified, the container runtime's default will be used, which might be configured in the container image. Cannot be updated. type: string x-kubernetes-preserve-unknown-fields: true enableServiceLinks: description: 'EnableServiceLinks indicates whether information about services should be injected into pod''s environment variables, matching the syntax of Docker links. Optional: Defaults to true.' type: boolean imagePullSecrets: description: 'ImagePullSecrets is an optional list of references to secrets in the same namespace to use for pulling any of the images used by this PodSpec. If specified, these secrets will be passed to individual puller implementations for them to use. For example, in the case of docker, only DockerConfig type secrets are honored. More info: https://kubernetes.io/docs/concepts/containers/images#specifying-imagepullsecrets-on-a-pod' type: array items: description: LocalObjectReference contains enough information to let you locate the referenced object inside the same namespace. type: object properties: name: description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?' type: string serviceAccountName: description: 'ServiceAccountName is the name of the ServiceAccount to use to run this pod. More info: https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/' type: string timeoutSeconds: description: TimeoutSeconds is the maximum duration in seconds that the request routing layer will wait for a request delivered to a container to begin replying (send network traffic). If unspecified, a system default will be provided. type: integer format: int64 volumes: description: 'List of volumes that can be mounted by containers belonging to the pod. More info: https://kubernetes.io/docs/concepts/storage/volumes' type: array items: description: Volume represents a named volume in a pod that may be accessed by any container in the pod. type: object required: - name properties: configMap: description: ConfigMap represents a configMap that should populate this volume type: object properties: defaultMode: description: 'Optional: mode bits used to set permissions on created files by default. Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. Defaults to 0644. Directories within the path are not affected by this setting. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.' type: integer format: int32 items: description: If unspecified, each key-value pair in the Data field of the referenced ConfigMap will be projected into the volume as a file whose name is the key and content is the value. If specified, the listed keys will be projected into the specified paths, and unlisted keys will not be present. If a key is specified which is not present in the ConfigMap, the volume setup will error unless it is marked optional. Paths must be relative and may not contain the '..' path or start with '..'. type: array items: description: Maps a string key to a path within a volume. type: object required: - key - path properties: key: description: The key to project. type: string mode: description: 'Optional: mode bits used to set permissions on this file. Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. If not specified, the volume defaultMode will be used. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.' type: integer format: int32 path: description: The relative path of the file to map the key to. May not be an absolute path. May not contain the path element '..'. May not start with the string '..'. type: string name: description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?' type: string optional: description: Specify whether the ConfigMap or its keys must be defined type: boolean name: description: 'Volume''s name. Must be a DNS_LABEL and unique within the pod. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names' type: string projected: description: Items for all in one resources secrets, configmaps, and downward API type: object properties: defaultMode: description: Mode bits used to set permissions on created files by default. Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. Directories within the path are not affected by this setting. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set. type: integer format: int32 sources: description: list of volume projections type: array items: description: Projection that may be projected along with other supported volume types type: object properties: configMap: description: information about the configMap data to project type: object properties: items: description: If unspecified, each key-value pair in the Data field of the referenced ConfigMap will be projected into the volume as a file whose name is the key and content is the value. If specified, the listed keys will be projected into the specified paths, and unlisted keys will not be present. If a key is specified which is not present in the ConfigMap, the volume setup will error unless it is marked optional. Paths must be relative and may not contain the '..' path or start with '..'. type: array items: description: Maps a string key to a path within a volume. type: object required: - key - path properties: key: description: The key to project. type: string mode: description: 'Optional: mode bits used to set permissions on this file. Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. If not specified, the volume defaultMode will be used. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.' type: integer format: int32 path: description: The relative path of the file to map the key to. May not be an absolute path. May not contain the path element '..'. May not start with the string '..'. type: string name: description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?' type: string optional: description: Specify whether the ConfigMap or its keys must be defined type: boolean secret: description: information about the secret data to project type: object properties: items: description: If unspecified, each key-value pair in the Data field of the referenced Secret will be projected into the volume as a file whose name is the key and content is the value. If specified, the listed keys will be projected into the specified paths, and unlisted keys will not be present. If a key is specified which is not present in the Secret, the volume setup will error unless it is marked optional. Paths must be relative and may not contain the '..' path or start with '..'. type: array items: description: Maps a string key to a path within a volume. type: object required: - key - path properties: key: description: The key to project. type: string mode: description: 'Optional: mode bits used to set permissions on this file. Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. If not specified, the volume defaultMode will be used. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.' type: integer format: int32 path: description: The relative path of the file to map the key to. May not be an absolute path. May not contain the path element '..'. May not start with the string '..'. type: string name: description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?' type: string optional: description: Specify whether the Secret or its key must be defined type: boolean serviceAccountToken: description: information about the serviceAccountToken data to project type: object required: - path properties: audience: description: Audience is the intended audience of the token. A recipient of a token must identify itself with an identifier specified in the audience of the token, and otherwise should reject the token. The audience defaults to the identifier of the apiserver. type: string expirationSeconds: description: ExpirationSeconds is the requested duration of validity of the service account token. As the token approaches expiration, the kubelet volume plugin will proactively rotate the service account token. The kubelet will start trying to rotate the token if the token is older than 80 percent of its time to live or if the token is older than 24 hours.Defaults to 1 hour and must be at least 10 minutes. type: integer format: int64 path: description: Path is the path relative to the mount point of the file to project the token into. type: string secret: description: 'Secret represents a secret that should populate this volume. More info: https://kubernetes.io/docs/concepts/storage/volumes#secret' type: object properties: defaultMode: description: 'Optional: mode bits used to set permissions on created files by default. Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. Defaults to 0644. Directories within the path are not affected by this setting. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.' type: integer format: int32 items: description: If unspecified, each key-value pair in the Data field of the referenced Secret will be projected into the volume as a file whose name is the key and content is the value. If specified, the listed keys will be projected into the specified paths, and unlisted keys will not be present. If a key is specified which is not present in the Secret, the volume setup will error unless it is marked optional. Paths must be relative and may not contain the '..' path or start with '..'. type: array items: description: Maps a string key to a path within a volume. type: object required: - key - path properties: key: description: The key to project. type: string mode: description: 'Optional: mode bits used to set permissions on this file. Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. If not specified, the volume defaultMode will be used. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.' type: integer format: int32 path: description: The relative path of the file to map the key to. May not be an absolute path. May not contain the path element '..'. May not start with the string '..'. type: string optional: description: Specify whether the Secret or its keys must be defined type: boolean secretName: description: 'Name of the secret in the pod''s namespace to use. More info: https://kubernetes.io/docs/concepts/storage/volumes#secret' type: string x-kubernetes-preserve-unknown-fields: true x-kubernetes-preserve-unknown-fields: true traffic: description: Traffic specifies how to distribute traffic over a collection of revisions and configurations. type: array items: description: TrafficTarget holds a single entry of the routing table for a Route. type: object properties: configurationName: description: ConfigurationName of a configuration to whose latest revision we will send this portion of traffic. When the "status.latestReadyRevisionName" of the referenced configuration changes, we will automatically migrate traffic from the prior "latest ready" revision to the new one. This field is never set in Route's status, only its spec. This is mutually exclusive with RevisionName. type: string latestRevision: description: LatestRevision may be optionally provided to indicate that the latest ready Revision of the Configuration should be used for this traffic target. When provided LatestRevision must be true if RevisionName is empty; it must be false when RevisionName is non-empty. type: boolean percent: description: 'Percent indicates that percentage based routing should be used and the value indicates the percent of traffic that is be routed to this Revision or Configuration. `0` (zero) mean no traffic, `100` means all traffic. When percentage based routing is being used the follow rules apply: - the sum of all percent values must equal 100 - when not specified, the implied value for `percent` is zero for that particular Revision or Configuration' type: integer format: int64 revisionName: description: RevisionName of a specific revision to which to send this portion of traffic. This is mutually exclusive with ConfigurationName. type: string tag: description: Tag is optionally used to expose a dedicated url for referencing this target exclusively. type: string url: description: URL displays the URL for accessing named traffic targets. URL is displayed in status, and is disallowed on spec. URL must contain a scheme (e.g. http://) and a hostname, but may not contain anything else (e.g. basic auth, url path, etc.) type: string status: description: ServiceStatus represents the Status stanza of the Service resource. type: object properties: address: description: Address holds the information needed for a Route to be the target of an event. type: object properties: url: type: string annotations: description: Annotations is additional Status fields for the Resource to save some additional State as well as convey more information to the user. This is roughly akin to Annotations on any k8s resource, just the reconciler conveying richer information outwards. type: object additionalProperties: type: string conditions: description: Conditions the latest available observations of a resource's current state. type: array items: description: 'Condition defines a readiness condition for a Knative resource. See: https://github.com/kubernetes/community/blob/master/contributors/devel/sig-architecture/api-conventions.md#typical-status-properties' type: object required: - status - type properties: lastTransitionTime: description: LastTransitionTime is the last time the condition transitioned from one status to another. We use VolatileTime in place of metav1.Time to exclude this from creating equality.Semantic differences (all other things held constant). type: string format: date-time message: description: A human readable message indicating details about the transition. type: string reason: description: The reason for the condition's last transition. type: string severity: description: Severity with which to treat failures of this type of condition. When this is not specified, it defaults to Error. type: string status: description: Status of the condition, one of True, False, Unknown. type: string type: description: Type of condition. type: string latestCreatedRevisionName: description: LatestCreatedRevisionName is the last revision that was created from this Configuration. It might not be ready yet, for that use LatestReadyRevisionName. type: string latestReadyRevisionName: description: LatestReadyRevisionName holds the name of the latest Revision stamped out from this Configuration that has had its "Ready" condition become "True". type: string observedGeneration: description: ObservedGeneration is the 'Generation' of the Service that was last processed by the controller. type: integer format: int64 traffic: description: Traffic holds the configured traffic distribution. These entries will always contain RevisionName references. When ConfigurationName appears in the spec, this will hold the LatestReadyRevisionName that we last observed. type: array items: description: TrafficTarget holds a single entry of the routing table for a Route. type: object properties: configurationName: description: ConfigurationName of a configuration to whose latest revision we will send this portion of traffic. When the "status.latestReadyRevisionName" of the referenced configuration changes, we will automatically migrate traffic from the prior "latest ready" revision to the new one. This field is never set in Route's status, only its spec. This is mutually exclusive with RevisionName. type: string latestRevision: description: LatestRevision may be optionally provided to indicate that the latest ready Revision of the Configuration should be used for this traffic target. When provided LatestRevision must be true if RevisionName is empty; it must be false when RevisionName is non-empty. type: boolean percent: description: 'Percent indicates that percentage based routing should be used and the value indicates the percent of traffic that is be routed to this Revision or Configuration. `0` (zero) mean no traffic, `100` means all traffic. When percentage based routing is being used the follow rules apply: - the sum of all percent values must equal 100 - when not specified, the implied value for `percent` is zero for that particular Revision or Configuration' type: integer format: int64 revisionName: description: RevisionName of a specific revision to which to send this portion of traffic. This is mutually exclusive with ConfigurationName. type: string tag: description: Tag is optionally used to expose a dedicated url for referencing this target exclusively. type: string url: description: URL displays the URL for accessing named traffic targets. URL is displayed in status, and is disallowed on spec. URL must contain a scheme (e.g. http://) and a hostname, but may not contain anything else (e.g. basic auth, url path, etc.) type: string url: description: URL holds the url that will distribute traffic over the provided traffic targets. It generally has the form http[s]://{route-name}.{route-namespace}.{cluster-level-suffix} type: string --- # Copyright 2018 The Knative Authors # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # https://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. apiVersion: apiextensions.k8s.io/v1 kind: CustomResourceDefinition metadata: name: images.caching.internal.knative.dev labels: knative.dev/crd-install: "true" spec: group: caching.internal.knative.dev names: kind: Image plural: images singular: image categories: - knative-internal - caching shortNames: - img scope: Namespaced versions: - name: v1alpha1 served: true storage: true subresources: status: {} schema: openAPIV3Schema: type: object # this is a work around so we don't need to flush out the # schema for each version at this time # # see issue: https://github.com/knative/serving/issues/912 x-kubernetes-preserve-unknown-fields: true additionalPrinterColumns: - name: Image type: string jsonPath: .spec.image ---