{
  "definitions": {
    "AindManipulatorCalibration": {
      "description": "Aind manipulator calibration class",
      "properties": {
        "device_name": {
          "default": "AindManipulator",
          "description": "Must match a device name in rig/instrument",
          "title": "Device name",
          "type": "string"
        },
        "input": {
          "$ref": "#/definitions/AindManipulatorCalibrationInput",
          "title": "Input of the calibration"
        },
        "output": {
          "$ref": "#/definitions/AindManipulatorCalibrationOutput",
          "title": "Output of the calibration."
        },
        "date": {
          "default": null,
          "oneOf": [
            {
              "format": "date-time",
              "type": "string"
            },
            {
              "type": "null"
            }
          ],
          "title": "Date"
        },
        "description": {
          "const": "Calibration of the load cells system",
          "default": "Calibration of the load cells system",
          "title": "Description",
          "type": "string"
        },
        "notes": {
          "default": null,
          "oneOf": [
            {
              "type": "string"
            },
            {
              "type": "null"
            }
          ],
          "title": "Notes"
        }
      },
      "required": [
        "input",
        "output"
      ],
      "title": "AindManipulatorCalibration",
      "type": "object"
    },
    "AindManipulatorCalibrationInput": {
      "properties": {
        "full_step_to_mm": {
          "$ref": "#/definitions/ManipulatorPosition",
          "default": {
            "x": 0.01,
            "y1": 0.01,
            "y2": 0.01,
            "z": 0.01
          },
          "title": "Full step to mm. Used to convert steps to SI Units"
        },
        "axis_configuration": {
          "default": [
            {
              "axis": 2,
              "step_acceleration_interval": 100,
              "step_interval": 100,
              "microstep_resolution": 0,
              "maximum_step_interval": 2000,
              "motor_operation_mode": 0,
              "max_limit": 25.0,
              "min_limit": -0.01
            },
            {
              "axis": 3,
              "step_acceleration_interval": 100,
              "step_interval": 100,
              "microstep_resolution": 0,
              "maximum_step_interval": 2000,
              "motor_operation_mode": 0,
              "max_limit": 25.0,
              "min_limit": -0.01
            },
            {
              "axis": 1,
              "step_acceleration_interval": 100,
              "step_interval": 100,
              "microstep_resolution": 0,
              "maximum_step_interval": 2000,
              "motor_operation_mode": 0,
              "max_limit": 25.0,
              "min_limit": -0.01
            },
            {
              "axis": 4,
              "step_acceleration_interval": 100,
              "step_interval": 100,
              "microstep_resolution": 0,
              "maximum_step_interval": 2000,
              "motor_operation_mode": 0,
              "max_limit": 25.0,
              "min_limit": -0.01
            }
          ],
          "items": {
            "$ref": "#/definitions/AxisConfiguration"
          },
          "title": "Axes configuration. Only the axes that are configured will be enabled.",
          "type": "array"
        },
        "homing_order": {
          "default": [
            2,
            3,
            1,
            4
          ],
          "items": {
            "$ref": "#/definitions/Axis"
          },
          "title": "Homing order",
          "type": "array"
        },
        "initial_position": {
          "$ref": "#/definitions/ManipulatorPosition",
          "default": {
            "x": 0.0,
            "y1": 0.0,
            "y2": 0.0,
            "z": 0.0
          }
        }
      },
      "title": "AindManipulatorCalibrationInput",
      "type": "object"
    },
    "AindManipulatorCalibrationOutput": {
      "properties": {},
      "title": "AindManipulatorCalibrationOutput",
      "type": "object"
    },
    "AindManipulatorDevice": {
      "properties": {
        "device_type": {
          "const": "stepperdriver",
          "default": "stepperdriver",
          "title": "Device Type",
          "type": "string"
        },
        "additional_settings": {
          "default": null,
          "description": "Additional settings",
          "oneOf": [
            {
              "$ref": "#/definitions/BaseModel"
            },
            {
              "type": "null"
            }
          ]
        },
        "calibration": {
          "default": null,
          "oneOf": [
            {
              "$ref": "#/definitions/AindManipulatorCalibration"
            },
            {
              "type": "null"
            }
          ],
          "title": "Calibration of the manipulator"
        },
        "who_am_i": {
          "const": 1130,
          "default": 1130,
          "title": "Who Am I",
          "type": "integer"
        },
        "serial_number": {
          "default": null,
          "description": "Device serial number",
          "oneOf": [
            {
              "type": "string"
            },
            {
              "type": "null"
            }
          ],
          "title": "Serial Number"
        },
        "port_name": {
          "description": "Device port name",
          "title": "Port Name",
          "type": "string"
        }
      },
      "required": [
        "port_name"
      ],
      "title": "AindManipulatorDevice",
      "type": "object"
    },
    "Axis": {
      "description": "Motor axis available",
      "enum": [
        0,
        1,
        2,
        3,
        4
      ],
      "title": "Axis",
      "type": "integer",
      "x-enumNames": [
        "None",
        "X",
        "Y1",
        "Y2",
        "Z"
      ]
    },
    "AxisConfiguration": {
      "description": "Axis configuration",
      "properties": {
        "axis": {
          "$ref": "#/definitions/Axis",
          "title": "Axis to be configured"
        },
        "step_acceleration_interval": {
          "default": 100,
          "description": "Acceleration of the step interval in microseconds",
          "maximum": 2000,
          "minimum": 2,
          "title": "Acceleration",
          "type": "integer"
        },
        "step_interval": {
          "default": 100,
          "description": "Step interval in microseconds.",
          "maximum": 20000,
          "minimum": 100,
          "title": "Step interval",
          "type": "integer"
        },
        "microstep_resolution": {
          "$ref": "#/definitions/MicrostepResolution",
          "default": 0,
          "title": "Microstep resolution"
        },
        "maximum_step_interval": {
          "default": 2000,
          "maximum": 20000,
          "minimum": 100,
          "title": "Configures the time between step motor pulses (us) used when starting or stopping a movement",
          "type": "integer"
        },
        "motor_operation_mode": {
          "$ref": "#/definitions/MotorOperationMode",
          "default": 0,
          "title": "Motor operation mode"
        },
        "max_limit": {
          "default": 25,
          "title": "Maximum limit in SI units. A value of 0 disables this limit.",
          "type": "number"
        },
        "min_limit": {
          "default": -0.01,
          "title": "Minimum limit in SI units. A value of 0 disables this limit.",
          "type": "number"
        }
      },
      "required": [
        "axis"
      ],
      "title": "AxisConfiguration",
      "type": "object"
    },
    "BaseModel": {
      "properties": {},
      "title": "BaseModel",
      "type": "object"
    },
    "ManipulatorPosition": {
      "properties": {
        "x": {
          "title": "X coordinate",
          "type": "number"
        },
        "y1": {
          "title": "Y1 coordinate",
          "type": "number"
        },
        "y2": {
          "title": "Y2 coordinate",
          "type": "number"
        },
        "z": {
          "title": "Z coordinate",
          "type": "number"
        }
      },
      "required": [
        "x",
        "y1",
        "y2",
        "z"
      ],
      "title": "ManipulatorPosition",
      "type": "object"
    },
    "MicrostepResolution": {
      "enum": [
        0,
        1,
        2,
        3
      ],
      "title": "MicrostepResolution",
      "type": "integer",
      "x-enumNames": [
        "Microstep8",
        "Microstep16",
        "Microstep32",
        "Microstep64"
      ]
    },
    "MotorOperationMode": {
      "enum": [
        0,
        1
      ],
      "title": "MotorOperationMode",
      "type": "integer",
      "x-enumNames": [
        "Quiet",
        "Dynamic"
      ]
    }
  },
  "properties": {
    "aind_behavior_services_pkg_version": {
      "default": "0.8.7",
      "pattern": "^(0|[1-9]\\d*)\\.(0|[1-9]\\d*)\\.(0|[1-9]\\d*)(?:-((?:0|[1-9]\\d*|\\d*[a-zA-Z-][0-9a-zA-Z-]*)(?:\\.(?:0|[1-9]\\d*|\\d*[a-zA-Z-][0-9a-zA-Z-]*))*))?(?:\\+([0-9a-zA-Z-]+(?:\\.[0-9a-zA-Z-]+)*))?$",
      "title": "aind_behavior_services package version",
      "type": "string"
    },
    "version": {
      "const": "0.1.0",
      "default": "0.1.0",
      "title": "Version",
      "type": "string"
    },
    "computer_name": {
      "description": "Computer name",
      "title": "Computer Name",
      "type": "string"
    },
    "rig_name": {
      "description": "Rig name",
      "title": "Rig Name",
      "type": "string"
    },
    "manipulator": {
      "$ref": "#/definitions/AindManipulatorDevice",
      "default": null,
      "title": "Manipulator device"
    }
  },
  "required": [
    "rig_name"
  ],
  "title": "CalibrationRig",
  "type": "object"
}