Thor is an open source, 3D printed, 6 degrees of freedom robotic arm. Designed to be affordable and accessible, Thor is ideal for educational settings, makers, and robotics enthusiasts. With a height of 625mm it has the capacity to lift up to 750g. Its yaw-roll-roll-yaw-roll-yaw configuration is common in industrial manipulators.
## β¨ Key Features
- π§© **Born Open Source**: Designed using open source software such as FreeCAD, KiCAD, GRBL, RRF and ROS.
- ποΈ **Released Open Source**: All source files published under CC-BY-SA-4.0 license.
- π° **Low Cost**: Hardware cost below 350β¬.
- π **Suitable for education**: Perfect for robotics courses in schools and universities, there are already success cases!
- π§° **G-code Controlled**: Uses the same language as 3d printers and CNCs to move.
- π³ **ROS2 Integration**: Available implementation using Docker for flexibility.
## π¦ Repository Structure
- `freecad-src` β Source files of 3D models created with FreeCAD
- `mods` β Modified models and improvements to standard models
- `stl` β Printable STL files
- `step` β STEP files
## π Related Repositories
- [**Thor-ROS**](https://github.com/AngelLM/Thor-ROS): ROS2 & Moveit2 configuration files and packages to work with Thor.
- [**ThorControlPCB**](https://github.com/AngelLM/ThorControlPCB): Source & manufacture files of Arduino Mega shield designed to control Thor.
- [**Asgard**](https://github.com/AngelLM/Asgard): Control software for thor motors with a simple interface.
## π Getting Started
1. **Read the Documentation**: Comprehensive guides on printing, assembly, electronics, and firmware are available at [thor.angel-lm.com/documentation](http://thor.angel-lm.com/documentation/).
2. **Print the Parts**: Use the STL files in this repository.
3. **Get the Hardware**: Take a look to the [Bill of Materials](http://thor.angel-lm.com/documentation/bom/).
4. **Assemble the Robot**: See [here](http://thor.angel-lm.com/documentation/assembly/) for assembly videos and interactive instructions.
5. **Assemble & Setup the Electronics**: The [Wiring & Setup](http://thor.angel-lm.com/documentation/electronics/) guide will help you prepare your electronic board and make the hardware connections.
6. **Install the Firmware**: Depending on which electronics you have chosen, you will have to perform a different firmware configuration. [This page](http://thor.angel-lm.com/documentation/firmware/) explains the steps to follow.
7. **Control the Robot**: Use Asgard to move the robot. [Here](http://thor.angel-lm.com/documentation/control-software/) is how to do it.
## π§ Technical Specifications
- **Degrees of Freedom**: 6 (yaw-roll-roll-yaw-roll-yaw).
- **Height Stretched**: 625mm (without end effector).
- **Payload Capacity**: 750g max (including end effector weight).
- **Motors**: Stepper motors.
- **Electronics**: DIY PCB or commercial boards.
- **Transmission**: 3D printed gears, GT2 pulleys and belts.
- **Software**: FreeCAD, KiCAD, GRBL, RRF, ROS2.
## π Additional Resources
- π **Official Website**: [thor.angel-lm.com](http://thor.angel-lm.com/)
- β **Frequently Asked Questions**: [FAQ](http://thor.angel-lm.com/faq/)
- π¬ **Thor Community Forums**: [Thor Forums](http://thor.angel-lm.com/forums/)
- π¬ **Thor Discord Server**: [Thor Robot Community](https://discord.com/invite/a5dSVqSUK5)
## π€ Contributing
Contributions are welcome! If you'd like to improve Thor β whether it's design, documentation, or code β feel free to open an [Issue](https://github.com/AngelLM/Thor/issues) or submit a Pull Request.
## π License
Thor is licensed under the [Creative Commons Attribution-ShareAlike 4.0 International License](https://creativecommons.org/licenses/by-sa/4.0/legalcode). Youβre free to use, modify, and distribute this project under its terms.
## π₯ Videos
[](https://www.youtube.com/watch?v=F2CDeHrFr2k)
[](https://www.youtube.com/watch?v=e0BGN1eIjiI)
[](https://www.youtube.com/watch?v=nDCN46trJvs)