# This is the camera feed/windows layout configuration file for the # displaycameras service. It ONLY configures the layout and feeds for # the cameras; the rest of the configuration is in displaycameras.conf. # See the comments in that file for notes on configuring the below. # This is a layout file intended to emulate the layout for six cameras # in the Unifi system (with one large, mid-res feed in the upper left # and smaller, low-res feeds arrayed around the right and bottom) on a # 1080p monitor. # You might use this as a layout.conf.defaultlayout file and remove # the /etc/layout.conf.1920x1080 file if one exists (or enable display # resolution autodetection and make this file your 1920x1080 layout config file). # It will never match autodetected display resolution and applied automatically # with the "large_left" file name suffix. # Window names # Large Upper Left with two to the right and three below (like the UBNT layout) windows=(large_left upper_right mid_right lower_left lower_center lower_right off_screen off_screen2 off_screen3) # Make sure to account for each window above in the list below. # Windows positions window_positions=( #First Row #large_left 1280x720 "0 0 1279 719" \ #upper_right # 640x360 "1280 0 1919 359" \ #Second Row (missing all but the far right window because large_left is double size #mid_right "1280 360 1919 719" \ #Third Row (all the way across the bottom) #lower_left # 640x360 "0 720 639 1079" \ #lower_center # 640x360 "640 720 1279 1079" \ #lower_right # 640x360 "1280 720 1919 1079" \ #off-screen # 640x360 window just off-screen to the right "1920 0 2559 359" \ # 640x360 window just below the other "1920 360 2559 719" \ # 640x360 window just below the other two "1920 720 2559 1079" \ ) # Camera Names camera_names=(SE NE South West Vestibule SW) # Make sure to account for each camera above in the list of feeds below. # Camera Feeds camera_feeds=( \ # Mid-Res # "rtsp://xxx.xxx.xxx.xxx/yyyyy_1" \ #SE "" \ #Low-Res # "rtsp://xxx.xxx.xxx.xxx/yyyyy_2" \ #NE "" \ #South "" \ #West "" \ #Vestibule "" \ #SW "" \ ) # Are we rotating cameras through the window matrix? (default false if not set here) # You're REALLY not going to want to rotate these as the RPi will have to do # significant downscaling on the Hi-Res feed to display it in the smaller windows. #rotate="true"