Alan Ruttenberg Bill Duncan Stefan Schulz Melanie Courtot BFO 2 Reference: BFO does not claim to be a complete coverage of all entities. It seeks only to provide coverage of those entities studied by empirical science together with those entities which affect or are involved in human activities such as data processing and planning – coverage that is sufficiently broad to provide assistance to those engaged in building domain ontologies for purposes of data annotation [17 Mark Ressler Fabian Neuhaus Thomas Bittner Bjoern Peters Mauricio Almeida David Osumi-Sutherland BFO 2 Reference: For both terms and relational expressions in BFO, we distinguish between primitive and defined. ‘Entity’ is an example of one such primitive term. Primitive terms in a highest-level ontology such as BFO are terms that are so basic to our understanding of reality that there is no way of defining them in a non-circular fashion. For these, therefore, we can provide only elucidations, supplemented by examples and by axioms. Janna Hastings Leonard Jacuzzo Mathias Brochhausen Randall Dipert Larry Hunter Robert Rovetto Albert Goldfain Chris Mungall Jie Zheng Barry Smith Ludger Jansen Yongqun "Oliver" He Werner Ceusters Pierre Grenon James A. Overton BFO 2 Reference: BFO’s treatment of continuants and occurrents – as also its treatment of regions, rests on a dichotomy between space and time, and on the view that there are two perspectives on reality – earlier called the ‘SNAP’ and ‘SPAN’ perspectives, both of which are essential to the non-reductionist representation of reality as we understand it from the best available science [30 Jonathan Bona Ron Rudnicki The http://purl.obolibary.org/obo/bfo/classes-only.owl variant of BFO ("bfo_classes_only.owl") includes only the class hierarchy and annotations from the full OWL version of BFO 2: http://purl.obolibary.org/obo/bfo.owl ("bfo.owl"). There are no object properties or logical axioms that use the object properties in bfo_classes_only.owl. As the logical axioms in the bfo_classes_only.owl variant are limited to subclass and disjoint assertions they are much weaker than the logical axioms in bfo.owl. If you plan to use the relations that define BFO 2, you should import bfo.owl instead of bfo_classes_only.owl. To the extent that the relations are used without importing bfo.owl, be mindful that they should be used in a manner consistent with their use in bfo.owl. Otherwise if your ontology is imported by a another ontology that imports bfo.owl there may be inconsistencies. See the BFO 2 release notes for further information about BFO 2. Please note that the current release of bfo.owl uses temporal relations when the subject or object is a continuant, a major change from BFO 1. This is an early version of BFO version 2 and has not yet been extensively reviewed by the project team members. Please see the project site http://code.google.com/p/bfo/ , the bfo2 owl discussion group http://groups.google.com/group/bfo-owl-devel , the bfo2 discussion group http://groups.google.com/group/bfo-devel, the tracking google doc http://goo.gl/IlrEE, and the current version of the bfo2 reference http://purl.obolibrary.org/obo/bfo/dev/bfo2-reference.docx . This ontology is generated from a specification at http://bfo.googlecode.com/svn/trunk/src/ontology/owl-group/specification/ and with the code that generates the OWL version in http://bfo.googlecode.com/svn/trunk/src/tools/. A very early version of BFO version 2 in CLIF is at http://purl.obolibrary.org/obo/bfo/dev/bfo.clif BFO OWL specification label Really of interest to developers only Relates an entity in the ontology to the name of the variable that is used to represent it in the code that generates the BFO OWL file from the lispy specification. BFO CLIF specification label Person:Alan Ruttenberg Really of interest to developers only Relates an entity in the ontology to the term that is used to represent it in the the CLIF specification of BFO2 editor preferred term example of usage definition editor note term editor alternative term definition source curator note imported from elucidation has associated axiom(nl) has associated axiom(fol) has axiom label entity Entity BFO 2 Reference: In all areas of empirical inquiry we encounter general terms of two sorts. First are general terms which refer to universals or types:animaltuberculosissurgical procedurediseaseSecond, are general terms used to refer to groups of entities which instantiate a given universal but do not correspond to the extension of any subuniversal of that universal because there is nothing intrinsic to the entities in question by virtue of which they – and only they – are counted as belonging to the given group. Examples are: animal purchased by the Emperortuberculosis diagnosed on a Wednesdaysurgical procedure performed on a patient from Stockholmperson identified as candidate for clinical trial #2056-555person who is signatory of Form 656-PPVpainting by Leonardo da VinciSuch terms, which represent what are called ‘specializations’ in [81 entity An entity is anything that exists or has existed or will exist. (axiom label in BFO2 Reference: [001-001]) Entity doesn't have a closure axiom because the subclasses don't necessarily exhaust all possibilites. For example Werner Ceusters 'portions of reality' include 4 sorts, entities (as BFO construes them), universals, configurations, and relations. It is an open question as to whether entities as construed in BFO will at some point also include these other portions of reality. See, for example, 'How to track absolutely everything' at http://www.referent-tracking.com/_RTU/papers/CeustersICbookRevised.pdf Julius Caesar Verdi’s Requiem the Second World War your body mass index per discussion with Barry Smith Entity doesn't have a closure axiom because the subclasses don't necessarily exhaust all possibilites. For example Werner Ceusters 'portions of reality' include 4 sorts, entities (as BFO construes them), universals, configurations, and relations. It is an open question as to whether entities as construed in BFO will at some point also include these other portions of reality. See, for example, 'How to track absolutely everything' at http://www.referent-tracking.com/_RTU/papers/CeustersICbookRevised.pdf An entity is anything that exists or has existed or will exist. (axiom label in BFO2 Reference: [001-001]) continuant (forall (x) (if (Material Entity x) (exists (t) (and (TemporalRegion t) (existsAt x t))))) // axiom label in BFO2 CLIF: [011-002] (forall (x) (if (Continuant x) (Entity x))) // axiom label in BFO2 CLIF: [008-002] (forall (x y) (if (and (Continuant x) (exists (t) (continuantPartOfAt y x t))) (Continuant y))) // axiom label in BFO2 CLIF: [009-002] Continuant continuant (forall (x y) (if (and (Continuant x) (exists (t) (hasContinuantPartOfAt y x t))) (Continuant y))) // axiom label in BFO2 CLIF: [126-001] A continuant is an entity that persists, endures, or continues to exist through time while maintaining its identity. (axiom label in BFO2 Reference: [008-002]) BFO 2 Reference: Continuant entities are entities which can be sliced to yield parts only along the spatial dimension, yielding for example the parts of your table which we call its legs, its top, its nails. ‘My desk stretches from the window to the door. It has spatial parts, and can be sliced (in space) in two. With respect to time, however, a thing is a continuant.’ [60, p. 240 Continuant doesn't have a closure axiom because the subclasses don't necessarily exhaust all possibilites. For example, in an expansion involving bringing in some of Ceuster's other portions of reality, questions are raised as to whether universals are continuants if b is a continuant and if, for some t, c has_continuant_part b at t, then c is a continuant. (axiom label in BFO2 Reference: [126-001]) if b is a continuant and if, for some t, cis continuant_part of b at t, then c is a continuant. (axiom label in BFO2 Reference: [009-002]) if b is a material entity, then there is some temporal interval (referred to below as a one-dimensional temporal region) during which b exists. (axiom label in BFO2 Reference: [011-002]) Continuant doesn't have a closure axiom because the subclasses don't necessarily exhaust all possibilites. For example, in an expansion involving bringing in some of Ceuster's other portions of reality, questions are raised as to whether universals are continuants if b is a material entity, then there is some temporal interval (referred to below as a one-dimensional temporal region) during which b exists. (axiom label in BFO2 Reference: [011-002]) (forall (x) (if (Continuant x) (Entity x))) // axiom label in BFO2 CLIF: [008-002] (forall (x y) (if (and (Continuant x) (exists (t) (hasContinuantPartOfAt y x t))) (Continuant y))) // axiom label in BFO2 CLIF: [126-001] (forall (x) (if (Material Entity x) (exists (t) (and (TemporalRegion t) (existsAt x t))))) // axiom label in BFO2 CLIF: [011-002] if b is a continuant and if, for some t, c has_continuant_part b at t, then c is a continuant. (axiom label in BFO2 Reference: [126-001]) A continuant is an entity that persists, endures, or continues to exist through time while maintaining its identity. (axiom label in BFO2 Reference: [008-002]) (forall (x y) (if (and (Continuant x) (exists (t) (continuantPartOfAt y x t))) (Continuant y))) // axiom label in BFO2 CLIF: [009-002] if b is a continuant and if, for some t, cis continuant_part of b at t, then c is a continuant. (axiom label in BFO2 Reference: [009-002]) occurrent Occurrent (forall (x) (iff (Occurrent x) (and (Entity x) (exists (y) (temporalPartOf y x))))) // axiom label in BFO2 CLIF: [079-001] occurrent (forall (x) (if (Occurrent x) (exists (r) (and (SpatioTemporalRegion r) (occupiesSpatioTemporalRegion x r))))) // axiom label in BFO2 CLIF: [108-001] An occurrent is an entity that unfolds itself in time or it is the instantaneous boundary of such an entity (for example a beginning or an ending) or it is a temporal or spatiotemporal region which such an entity occupies_temporal_region or occupies_spatiotemporal_region. (axiom label in BFO2 Reference: [077-002]) BFO 2 Reference: every occurrent that is not a temporal or spatiotemporal region is s-dependent on some independent continuant that is not a spatial region BFO 2 Reference: s-dependence obtains between every process and its participants in the sense that, as a matter of necessity, this process could not have existed unless these or those participants existed also. A process may have a succession of participants at different phases of its unfolding. Thus there may be different players on the field at different times during the course of a football game; but the process which is the entire game s-depends_on all of these players nonetheless. Some temporal parts of this process will s-depend_on on only some of the players. Every occurrent occupies_spatiotemporal_region some spatiotemporal region. (axiom label in BFO2 Reference: [108-001]) Occurrent doesn't have a closure axiom because the subclasses don't necessarily exhaust all possibilites. An example would be the sum of a process and the process boundary of another process. Simons uses different terminology for relations of occurrents to regions: Denote the spatio-temporal location of a given occurrent e by 'spn[e]' and call this region its span. We may say an occurrent is at its span, in any larger region, and covers any smaller region. Now suppose we have fixed a frame of reference so that we can speak not merely of spatio-temporal but also of spatial regions (places) and temporal regions (times). The spread of an occurrent, (relative to a frame of reference) is the space it exactly occupies, and its spell is likewise the time it exactly occupies. We write 'spr[e]' and `spl[e]' respectively for the spread and spell of e, omitting mention of the frame. b is an occurrent entity iff b is an entity that has temporal parts. (axiom label in BFO2 Reference: [079-001]) An occurrent is an entity that unfolds itself in time or it is the instantaneous boundary of such an entity (for example a beginning or an ending) or it is a temporal or spatiotemporal region which such an entity occupies_temporal_region or occupies_spatiotemporal_region. (axiom label in BFO2 Reference: [077-002]) (forall (x) (iff (Occurrent x) (and (Entity x) (exists (y) (temporalPartOf y x))))) // axiom label in BFO2 CLIF: [079-001] Simons uses different terminology for relations of occurrents to regions: Denote the spatio-temporal location of a given occurrent e by 'spn[e]' and call this region its span. We may say an occurrent is at its span, in any larger region, and covers any smaller region. Now suppose we have fixed a frame of reference so that we can speak not merely of spatio-temporal but also of spatial regions (places) and temporal regions (times). The spread of an occurrent, (relative to a frame of reference) is the space it exactly occupies, and its spell is likewise the time it exactly occupies. We write 'spr[e]' and `spl[e]' respectively for the spread and spell of e, omitting mention of the frame. Occurrent doesn't have a closure axiom because the subclasses don't necessarily exhaust all possibilites. An example would be the sum of a process and the process boundary of another process. per discussion with Barry Smith (forall (x) (if (Occurrent x) (exists (r) (and (SpatioTemporalRegion r) (occupiesSpatioTemporalRegion x r))))) // axiom label in BFO2 CLIF: [108-001] Every occurrent occupies_spatiotemporal_region some spatiotemporal region. (axiom label in BFO2 Reference: [108-001]) b is an occurrent entity iff b is an entity that has temporal parts. (axiom label in BFO2 Reference: [079-001]) independent continuant (forall (x t) (if (IndependentContinuant x) (exists (r) (and (SpatialRegion r) (locatedInAt x r t))))) // axiom label in BFO2 CLIF: [134-001] (iff (IndependentContinuant a) (and (Continuant a) (not (exists (b t) (specificallyDependsOnAt a b t))))) // axiom label in BFO2 CLIF: [017-002] For any independent continuant b and any time t there is some spatial region r such that b is located_in r at t. (axiom label in BFO2 Reference: [134-001]) For every independent continuant b and time t during the region of time spanned by its life, there are entities which s-depends_on b during t. (axiom label in BFO2 Reference: [018-002]) ic IndependentContinuant (forall (x t) (if (and (IndependentContinuant x) (existsAt x t)) (exists (y) (and (Entity y) (specificallyDependsOnAt y x t))))) // axiom label in BFO2 CLIF: [018-002] a chair a heart a leg a molecule a spatial region an atom an orchestra. an organism b is an independent continuant = Def. b is a continuant which is such that there is no c and no t such that b s-depends_on c at t. (axiom label in BFO2 Reference: [017-002]) the bottom right portion of a human torso the interior of your mouth For every independent continuant b and time t during the region of time spanned by its life, there are entities which s-depends_on b during t. (axiom label in BFO2 Reference: [018-002]) (forall (x t) (if (and (IndependentContinuant x) (existsAt x t)) (exists (y) (and (Entity y) (specificallyDependsOnAt y x t))))) // axiom label in BFO2 CLIF: [018-002] b is an independent continuant = Def. b is a continuant which is such that there is no c and no t such that b s-depends_on c at t. (axiom label in BFO2 Reference: [017-002]) (iff (IndependentContinuant a) (and (Continuant a) (not (exists (b t) (specificallyDependsOnAt a b t))))) // axiom label in BFO2 CLIF: [017-002] (forall (x t) (if (IndependentContinuant x) (exists (r) (and (SpatialRegion r) (locatedInAt x r t))))) // axiom label in BFO2 CLIF: [134-001] For any independent continuant b and any time t there is some spatial region r such that b is located_in r at t. (axiom label in BFO2 Reference: [134-001]) spatial region (forall (x y t) (if (and (SpatialRegion x) (continuantPartOfAt y x t)) (SpatialRegion y))) // axiom label in BFO2 CLIF: [036-001] SpatialRegion (forall (x) (if (SpatialRegion x) (Continuant x))) // axiom label in BFO2 CLIF: [035-001] BFO 2 Reference: Spatial regions do not participate in processes. s-region A spatial region is a continuant entity that is a continuant_part_of spaceR as defined relative to some frame R. (axiom label in BFO2 Reference: [035-001]) All continuant parts of spatial regions are spatial regions. (axiom label in BFO2 Reference: [036-001]) Spatial region doesn't have a closure axiom because the subclasses don't exhaust all possibilites. An example would be the union of a spatial point and a spatial line that doesn't overlap the point, or two spatial lines that intersect at a single point. In both cases the resultant spatial region is neither 0-dimensional, 1-dimensional, 2-dimensional, or 3-dimensional. (forall (x) (if (SpatialRegion x) (Continuant x))) // axiom label in BFO2 CLIF: [035-001] per discussion with Barry Smith Spatial region doesn't have a closure axiom because the subclasses don't exhaust all possibilites. An example would be the union of a spatial point and a spatial line that doesn't overlap the point, or two spatial lines that intersect at a single point. In both cases the resultant spatial region is neither 0-dimensional, 1-dimensional, 2-dimensional, or 3-dimensional. A spatial region is a continuant entity that is a continuant_part_of spaceR as defined relative to some frame R. (axiom label in BFO2 Reference: [035-001]) (forall (x y t) (if (and (SpatialRegion x) (continuantPartOfAt y x t)) (SpatialRegion y))) // axiom label in BFO2 CLIF: [036-001] All continuant parts of spatial regions are spatial regions. (axiom label in BFO2 Reference: [036-001]) temporal region (forall (x) (if (TemporalRegion x) (Occurrent x))) // axiom label in BFO2 CLIF: [100-001] t-region (forall (x y) (if (and (TemporalRegion x) (occurrentPartOf y x)) (TemporalRegion y))) // axiom label in BFO2 CLIF: [101-001] (forall (r) (if (TemporalRegion r) (occupiesTemporalRegion r r))) // axiom label in BFO2 CLIF: [119-002] A temporal region is an occurrent entity that is part of time as defined relative to some reference frame. (axiom label in BFO2 Reference: [100-001]) All parts of temporal regions are temporal regions. (axiom label in BFO2 Reference: [101-001]) Temporal region doesn't have a closure axiom because the subclasses don't exhaust all possibilites. An example would be the mereological sum of a temporal instant and a temporal interval that doesn't overlap the instant. In this case the resultant temporal region is neither 0-dimensional nor 1-dimensional TemporalRegion Every temporal region t is such that t occupies_temporal_region t. (axiom label in BFO2 Reference: [119-002]) Temporal region doesn't have a closure axiom because the subclasses don't exhaust all possibilites. An example would be the mereological sum of a temporal instant and a temporal interval that doesn't overlap the instant. In this case the resultant temporal region is neither 0-dimensional nor 1-dimensional per discussion with Barry Smith A temporal region is an occurrent entity that is part of time as defined relative to some reference frame. (axiom label in BFO2 Reference: [100-001]) (forall (x y) (if (and (TemporalRegion x) (occurrentPartOf y x)) (TemporalRegion y))) // axiom label in BFO2 CLIF: [101-001] Every temporal region t is such that t occupies_temporal_region t. (axiom label in BFO2 Reference: [119-002]) (forall (r) (if (TemporalRegion r) (occupiesTemporalRegion r r))) // axiom label in BFO2 CLIF: [119-002] All parts of temporal regions are temporal regions. (axiom label in BFO2 Reference: [101-001]) (forall (x) (if (TemporalRegion x) (Occurrent x))) // axiom label in BFO2 CLIF: [100-001] two-dimensional spatial region 2d-s-region (forall (x) (if (TwoDimensionalSpatialRegion x) (SpatialRegion x))) // axiom label in BFO2 CLIF: [039-001] TwoDimensionalSpatialRegion A two-dimensional spatial region is a spatial region that is of two dimensions. (axiom label in BFO2 Reference: [039-001]) an infinitely thin plane in space. the surface of a sphere-shaped part of space A two-dimensional spatial region is a spatial region that is of two dimensions. (axiom label in BFO2 Reference: [039-001]) (forall (x) (if (TwoDimensionalSpatialRegion x) (SpatialRegion x))) // axiom label in BFO2 CLIF: [039-001] spatiotemporal region (forall (r) (if (SpatioTemporalRegion r) (occupiesSpatioTemporalRegion r r))) // axiom label in BFO2 CLIF: [107-002] (forall (x y) (if (and (SpatioTemporalRegion x) (occurrentPartOf y x)) (SpatioTemporalRegion y))) // axiom label in BFO2 CLIF: [096-001] (forall (x t) (if (SpatioTemporalRegion x) (exists (y) (and (SpatialRegion y) (spatiallyProjectsOntoAt x y t))))) // axiom label in BFO2 CLIF: [099-001] (forall (x) (if (SpatioTemporalRegion x) (Occurrent x))) // axiom label in BFO2 CLIF: [095-001] SpatiotemporalRegion st-region (forall (x) (if (SpatioTemporalRegion x) (exists (y) (and (TemporalRegion y) (temporallyProjectsOnto x y))))) // axiom label in BFO2 CLIF: [098-001] A spatiotemporal region is an occurrent entity that is part of spacetime. (axiom label in BFO2 Reference: [095-001]) All parts of spatiotemporal regions are spatiotemporal regions. (axiom label in BFO2 Reference: [096-001]) Each spatiotemporal region at any time t projects_onto some spatial region at t. (axiom label in BFO2 Reference: [099-001]) Each spatiotemporal region projects_onto some temporal region. (axiom label in BFO2 Reference: [098-001]) Every spatiotemporal region occupies_spatiotemporal_region itself. Every spatiotemporal region s is such that s occupies_spatiotemporal_region s. (axiom label in BFO2 Reference: [107-002]) the spatiotemporal region occupied by a human life the spatiotemporal region occupied by a process of cellular meiosis. the spatiotemporal region occupied by the development of a cancer tumor (forall (r) (if (SpatioTemporalRegion r) (occupiesSpatioTemporalRegion r r))) // axiom label in BFO2 CLIF: [107-002] All parts of spatiotemporal regions are spatiotemporal regions. (axiom label in BFO2 Reference: [096-001]) Every spatiotemporal region s is such that s occupies_spatiotemporal_region s. (axiom label in BFO2 Reference: [107-002]) (forall (x t) (if (SpatioTemporalRegion x) (exists (y) (and (SpatialRegion y) (spatiallyProjectsOntoAt x y t))))) // axiom label in BFO2 CLIF: [099-001] Each spatiotemporal region at any time t projects_onto some spatial region at t. (axiom label in BFO2 Reference: [099-001]) A spatiotemporal region is an occurrent entity that is part of spacetime. (axiom label in BFO2 Reference: [095-001]) (forall (x) (if (SpatioTemporalRegion x) (exists (y) (and (TemporalRegion y) (temporallyProjectsOnto x y))))) // axiom label in BFO2 CLIF: [098-001] Each spatiotemporal region projects_onto some temporal region. (axiom label in BFO2 Reference: [098-001]) (forall (x y) (if (and (SpatioTemporalRegion x) (occurrentPartOf y x)) (SpatioTemporalRegion y))) // axiom label in BFO2 CLIF: [096-001] (forall (x) (if (SpatioTemporalRegion x) (Occurrent x))) // axiom label in BFO2 CLIF: [095-001] process BFO 2 Reference: The realm of occurrents is less pervasively marked by the presence of natural units than is the case in the realm of independent continuants. Thus there is here no counterpart of ‘object’. In BFO 1.0 ‘process’ served as such a counterpart. In BFO 2.0 ‘process’ is, rather, the occurrent counterpart of ‘material entity’. Those natural – as contrasted with engineered, which here means: deliberately executed – units which do exist in the realm of occurrents are typically either parasitic on the existence of natural units on the continuant side, or they are fiat in nature. Thus we can count lives; we can count football games; we can count chemical reactions performed in experiments or in chemical manufacturing. We cannot count the processes taking place, for instance, in an episode of insect mating behavior.Even where natural units are identifiable, for example cycles in a cyclical process such as the beating of a heart or an organism’s sleep/wake cycle, the processes in question form a sequence with no discontinuities (temporal gaps) of the sort that we find for instance where billiard balls or zebrafish or planets are separated by clear spatial gaps. Lives of organisms are process units, but they too unfold in a continuous series from other, prior processes such as fertilization, and they unfold in turn in continuous series of post-life processes such as post-mortem decay. Clear examples of boundaries of processes are almost always of the fiat sort (midnight, a time of death as declared in an operating theater or on a death certificate, the initiation of a state of war) a process of cell-division, \ a beating of the heart process Process (iff (Process a) (and (Occurrent a) (exists (b) (properTemporalPartOf b a)) (exists (c t) (and (MaterialEntity c) (specificallyDependsOnAt a c t))))) // axiom label in BFO2 CLIF: [083-003] a process of meiosis a process of sleeping p is a process = Def. p is an occurrent that has temporal proper parts and for some time t, p s-depends_on some material entity at t. (axiom label in BFO2 Reference: [083-003]) the course of a disease the flight of a bird the life of an organism your process of aging. p is a process = Def. p is an occurrent that has temporal proper parts and for some time t, p s-depends_on some material entity at t. (axiom label in BFO2 Reference: [083-003]) (iff (Process a) (and (Occurrent a) (exists (b) (properTemporalPartOf b a)) (exists (c t) (and (MaterialEntity c) (specificallyDependsOnAt a c t))))) // axiom label in BFO2 CLIF: [083-003] disposition disposition (forall (x t) (if (and (RealizableEntity x) (existsAt x t)) (exists (y) (and (MaterialEntity y) (specificallyDepends x y t))))) // axiom label in BFO2 CLIF: [063-002] Disposition (forall (x) (if (Disposition x) (and (RealizableEntity x) (exists (y) (and (MaterialEntity y) (bearerOfAt x y t)))))) // axiom label in BFO2 CLIF: [062-002] BFO 2 Reference: Dispositions exist along a strength continuum. Weaker forms of disposition are realized in only a fraction of triggering cases. These forms occur in a significant number of cases of a similar type. If b is a realizable entity then for all t at which b exists, b s-depends_on some material entity at t. (axiom label in BFO2 Reference: [063-002]) an atom of element X has the disposition to decay to an atom of element Y b is a disposition means: b is a realizable entity & b’s bearer is some material entity & b is such that if it ceases to exist, then its bearer is physically changed, & b’s realization occurs when and because this bearer is in some special physical circumstances, & this realization occurs in virtue of the bearer’s physical make-up. (axiom label in BFO2 Reference: [062-002]) certain people have a predisposition to colon cancer children are innately disposed to categorize objects in certain ways. the cell wall is disposed to filter chemicals in endocytosis and exocytosis If b is a realizable entity then for all t at which b exists, b s-depends_on some material entity at t. (axiom label in BFO2 Reference: [063-002]) (forall (x t) (if (and (RealizableEntity x) (existsAt x t)) (exists (y) (and (MaterialEntity y) (specificallyDepends x y t))))) // axiom label in BFO2 CLIF: [063-002] (forall (x) (if (Disposition x) (and (RealizableEntity x) (exists (y) (and (MaterialEntity y) (bearerOfAt x y t)))))) // axiom label in BFO2 CLIF: [062-002] b is a disposition means: b is a realizable entity & b’s bearer is some material entity & b is such that if it ceases to exist, then its bearer is physically changed, & b’s realization occurs when and because this bearer is in some special physical circumstances, & this realization occurs in virtue of the bearer’s physical make-up. (axiom label in BFO2 Reference: [062-002]) realizable entity (forall (x) (if (RealizableEntity x) (and (SpecificallyDependentContinuant x) (exists (y) (and (IndependentContinuant y) (not (SpatialRegion y)) (inheresIn x y)))))) // axiom label in BFO2 CLIF: [058-002] (forall (x t) (if (RealizableEntity x) (exists (y) (and (IndependentContinuant y) (not (SpatialRegion y)) (bearerOfAt y x t))))) // axiom label in BFO2 CLIF: [060-002] RealizableEntity All realizable dependent continuants have independent continuants that are not spatial regions as their bearers. (axiom label in BFO2 Reference: [060-002]) To say that b is a realizable entity is to say that b is a specifically dependent continuant that inheres in some independent continuant which is not a spatial region and is of a type instances of which are realized in processes of a correlated type. (axiom label in BFO2 Reference: [058-002]) realizable the disposition of this piece of metal to conduct electricity. the disposition of your blood to coagulate the function of your reproductive organs the role of being a doctor the role of this boundary to delineate where Utah and Colorado meet (forall (x t) (if (RealizableEntity x) (exists (y) (and (IndependentContinuant y) (not (SpatialRegion y)) (bearerOfAt y x t))))) // axiom label in BFO2 CLIF: [060-002] All realizable dependent continuants have independent continuants that are not spatial regions as their bearers. (axiom label in BFO2 Reference: [060-002]) (forall (x) (if (RealizableEntity x) (and (SpecificallyDependentContinuant x) (exists (y) (and (IndependentContinuant y) (not (SpatialRegion y)) (inheresIn x y)))))) // axiom label in BFO2 CLIF: [058-002] To say that b is a realizable entity is to say that b is a specifically dependent continuant that inheres in some independent continuant which is not a spatial region and is of a type instances of which are realized in processes of a correlated type. (axiom label in BFO2 Reference: [058-002]) zero-dimensional spatial region ZeroDimensionalSpatialRegion (forall (x) (if (ZeroDimensionalSpatialRegion x) (SpatialRegion x))) // axiom label in BFO2 CLIF: [037-001] 0d-s-region A zero-dimensional spatial region is a point in space. (axiom label in BFO2 Reference: [037-001]) (forall (x) (if (ZeroDimensionalSpatialRegion x) (SpatialRegion x))) // axiom label in BFO2 CLIF: [037-001] A zero-dimensional spatial region is a point in space. (axiom label in BFO2 Reference: [037-001]) quality (forall (x) (if (exists (t) (and (existsAt x t) (Quality x))) (forall (t_1) (if (existsAt x t_1) (Quality x))))) // axiom label in BFO2 CLIF: [105-001] Quality (forall (x) (if (Quality x) (SpecificallyDependentContinuant x))) // axiom label in BFO2 CLIF: [055-001] a quality is a specifically dependent continuant that, in contrast to roles and dispositions, does not require any further process in order to be realized. (axiom label in BFO2 Reference: [055-001]) quality If an entity is a quality at any time that it exists, then it is a quality at every time that it exists. (axiom label in BFO2 Reference: [105-001]) the ambient temperature of this portion of air the color of a tomato the length of the circumference of your waist the mass of this piece of gold. the shape of your nose the shape of your nostril If an entity is a quality at any time that it exists, then it is a quality at every time that it exists. (axiom label in BFO2 Reference: [105-001]) a quality is a specifically dependent continuant that, in contrast to roles and dispositions, does not require any further process in order to be realized. (axiom label in BFO2 Reference: [055-001]) (forall (x) (if (exists (t) (and (existsAt x t) (Quality x))) (forall (t_1) (if (existsAt x t_1) (Quality x))))) // axiom label in BFO2 CLIF: [105-001] (forall (x) (if (Quality x) (SpecificallyDependentContinuant x))) // axiom label in BFO2 CLIF: [055-001] specifically dependent continuant Reciprocal specifically dependent continuants: the function of this key to open this lock and the mutually dependent disposition of this lock: to be opened by this key Specifically dependent continuant doesn't have a closure axiom because the subclasses don't necessarily exhaust all possibilites. We're not sure what else will develop here, but for example there are questions such as what are promises, obligation, etc. SpecificallyDependentContinuant (iff (SpecificallyDependentContinuant a) (and (Continuant a) (forall (t) (if (existsAt a t) (exists (b) (and (IndependentContinuant b) (not (SpatialRegion b)) (specificallyDependsOnAt a b t))))))) // axiom label in BFO2 CLIF: [050-003] b is a specifically dependent continuant = Def. b is a continuant & there is some independent continuant c which is not a spatial region and which is such that b s-depends_on c at every time t during the course of b’s existence. (axiom label in BFO2 Reference: [050-003]) of one-sided specifically dependent continuants: the mass of this tomato of relational dependent continuants (multiple bearers): John’s love for Mary, the ownership relation between John and this statue, the relation of authority between John and his subordinates. sdc the disposition of this fish to decay the function of this heart: to pump blood the mutual dependence of proton donors and acceptors in chemical reactions [79 the mutual dependence of the role predator and the role prey as played by two organisms in a given interaction the pink color of a medium rare piece of grilled filet mignon at its center the role of being a doctor the shape of this hole. the smell of this portion of mozzarella (iff (SpecificallyDependentContinuant a) (and (Continuant a) (forall (t) (if (existsAt a t) (exists (b) (and (IndependentContinuant b) (not (SpatialRegion b)) (specificallyDependsOnAt a b t))))))) // axiom label in BFO2 CLIF: [050-003] per discussion with Barry Smith Specifically dependent continuant doesn't have a closure axiom because the subclasses don't necessarily exhaust all possibilites. We're not sure what else will develop here, but for example there are questions such as what are promises, obligation, etc. b is a specifically dependent continuant = Def. b is a continuant & there is some independent continuant c which is not a spatial region and which is such that b s-depends_on c at every time t during the course of b’s existence. (axiom label in BFO2 Reference: [050-003]) role BFO 2 Reference: One major family of examples of non-rigid universals involves roles, and ontologies developed for corresponding administrative purposes may consist entirely of representatives of entities of this sort. Thus ‘professor’, defined as follows,b instance_of professor at t =Def. there is some c, c instance_of professor role & c inheres_in b at t.denotes a non-rigid universal and so also do ‘nurse’, ‘student’, ‘colonel’, ‘taxpayer’, and so forth. (These terms are all, in the jargon of philosophy, phase sortals.) By using role terms in definitions, we can create a BFO conformant treatment of such entities drawing on the fact that, while an instance of professor may be simultaneously an instance of trade union member, no instance of the type professor role is also (at any time) an instance of the type trade union member role (any more than any instance of the type color is at any time an instance of the type length).If an ontology of employment positions should be defined in terms of roles following the above pattern, this enables the ontology to do justice to the fact that individuals instantiate the corresponding universals – professor, sergeant, nurse – only during certain phases in their lives. role (forall (x) (if (Role x) (RealizableEntity x))) // axiom label in BFO2 CLIF: [061-001] John’s role of husband to Mary is dependent on Mary’s role of wife to John, and both are dependent on the object aggregate comprising John and Mary as member parts joined together through the relational quality of being married. Role b is a role means: b is a realizable entity & b exists because there is some single bearer that is in some special physical, social, or institutional set of circumstances in which this bearer does not have to be& b is not such that, if it ceases to exist, then the physical make-up of the bearer is thereby changed. (axiom label in BFO2 Reference: [061-001]) the priest role the role of a boundary to demarcate two neighboring administrative territories the role of a building in serving as a military target the role of a stone in marking a property boundary the role of subject in a clinical trial the student role (forall (x) (if (Role x) (RealizableEntity x))) // axiom label in BFO2 CLIF: [061-001] b is a role means: b is a realizable entity & b exists because there is some single bearer that is in some special physical, social, or institutional set of circumstances in which this bearer does not have to be& b is not such that, if it ceases to exist, then the physical make-up of the bearer is thereby changed. (axiom label in BFO2 Reference: [061-001]) fiat object part BFO 2 Reference: Most examples of fiat object parts are associated with theoretically drawn divisions fiat-object-part (forall (x) (if (FiatObjectPart x) (and (MaterialEntity x) (forall (t) (if (existsAt x t) (exists (y) (and (Object y) (properContinuantPartOfAt x y t)))))))) // axiom label in BFO2 CLIF: [027-004] FiatObjectPart b is a fiat object part = Def. b is a material entity which is such that for all times t, if b exists at t then there is some object c such that b proper continuant_part of c at t and c is demarcated from the remainder of c by a two-dimensional continuant fiat boundary. (axiom label in BFO2 Reference: [027-004]) or with divisions drawn by cognitive subjects for practical reasons, such as the division of a cake (before slicing) into (what will become) slices (and thus member parts of an object aggregate). However, this does not mean that fiat object parts are dependent for their existence on divisions or delineations effected by cognitive subjects. If, for example, it is correct to conceive geological layers of the Earth as fiat object parts of the Earth, then even though these layers were first delineated in recent times, still existed long before such delineation and what holds of these layers (for example that the oldest layers are also the lowest layers) did not begin to hold because of our acts of delineation.Treatment of material entity in BFOExamples viewed by some as problematic cases for the trichotomy of fiat object part, object, and object aggregate include: a mussel on (and attached to) a rock, a slime mold, a pizza, a cloud, a galaxy, a railway train with engine and multiple carriages, a clonal stand of quaking aspen, a bacterial community (biofilm), a broken femur. Note that, as Aristotle already clearly recognized, such problematic cases – which lie at or near the penumbra of instances defined by the categories in question – need not invalidate these categories. The existence of grey objects does not prove that there are not objects which are black and objects which are white; the existence of mules does not prove that there are not objects which are donkeys and objects which are horses. It does, however, show that the examples in question need to be addressed carefully in order to show how they can be fitted into the proposed scheme, for example by recognizing additional subdivisions [29 the FMA:regional parts of an intact human body. the Western hemisphere of the Earth the division of the brain into regions the division of the planet into hemispheres the dorsal and ventral surfaces of the body the upper and lower lobes of the left lung b is a fiat object part = Def. b is a material entity which is such that for all times t, if b exists at t then there is some object c such that b proper continuant_part of c at t and c is demarcated from the remainder of c by a two-dimensional continuant fiat boundary. (axiom label in BFO2 Reference: [027-004]) (forall (x) (if (FiatObjectPart x) (and (MaterialEntity x) (forall (t) (if (existsAt x t) (exists (y) (and (Object y) (properContinuantPartOfAt x y t)))))))) // axiom label in BFO2 CLIF: [027-004] one-dimensional spatial region (forall (x) (if (OneDimensionalSpatialRegion x) (SpatialRegion x))) // axiom label in BFO2 CLIF: [038-001] OneDimensionalSpatialRegion 1d-s-region A one-dimensional spatial region is a line or aggregate of lines stretching from one point in space to another. (axiom label in BFO2 Reference: [038-001]) an edge of a cube-shaped portion of space. (forall (x) (if (OneDimensionalSpatialRegion x) (SpatialRegion x))) // axiom label in BFO2 CLIF: [038-001] A one-dimensional spatial region is a line or aggregate of lines stretching from one point in space to another. (axiom label in BFO2 Reference: [038-001]) object aggregate object-aggregate ISBN:978-3-938793-98-5pp124-158#Thomas Bittner and Barry Smith, 'A Theory of Granular Partitions', in K. Munn and B. Smith (eds.), Applied Ontology: An Introduction, Frankfurt/Lancaster: ontos, 2008, 125-158. (forall (x) (if (ObjectAggregate x) (and (MaterialEntity x) (forall (t) (if (existsAt x t) (exists (y z) (and (Object y) (Object z) (memberPartOfAt y x t) (memberPartOfAt z x t) (not (= y z)))))) (not (exists (w t_1) (and (memberPartOfAt w x t_1) (not (Object w)))))))) // axiom label in BFO2 CLIF: [025-004] ObjectAggregate An entity a is an object aggregate if and only if there is a mutually exhaustive and pairwise disjoint partition of a into objects BFO 2 Reference: object aggregates may gain and lose parts while remaining numerically identical (one and the same individual) over time. This holds both for aggregates whose membership is determined naturally (the aggregate of cells in your body) and aggregates determined by fiat (a baseball team, a congressional committee). a collection of cells in a blood biobank. a swarm of bees is an aggregate of members who are linked together through natural bonds a symphony orchestra an organization is an aggregate whose member parts have roles of specific types (for example in a jazz band, a chess club, a football team) b is an object aggregate means: b is a material entity consisting exactly of a plurality of objects as member_parts at all times at which b exists. (axiom label in BFO2 Reference: [025-004]) defined by fiat: the aggregate of members of an organization defined through physical attachment: the aggregate of atoms in a lump of granite defined through physical containment: the aggregate of molecules of carbon dioxide in a sealed container defined via attributive delimitations such as: the patients in this hospital the aggregate of bearings in a constant velocity axle joint the aggregate of blood cells in your body the nitrogen atoms in the atmosphere the restaurants in Palo Alto your collection of Meissen ceramic plates. An entity a is an object aggregate if and only if there is a mutually exhaustive and pairwise disjoint partition of a into objects ISBN:978-3-938793-98-5pp124-158#Thomas Bittner and Barry Smith, 'A Theory of Granular Partitions', in K. Munn and B. Smith (eds.), Applied Ontology: An Introduction, Frankfurt/Lancaster: ontos, 2008, 125-158. An entity a is an object aggregate if and only if there is a mutually exhaustive and pairwise disjoint partition of a into objects (forall (x) (if (ObjectAggregate x) (and (MaterialEntity x) (forall (t) (if (existsAt x t) (exists (y z) (and (Object y) (Object z) (memberPartOfAt y x t) (memberPartOfAt z x t) (not (= y z)))))) (not (exists (w t_1) (and (memberPartOfAt w x t_1) (not (Object w)))))))) // axiom label in BFO2 CLIF: [025-004] b is an object aggregate means: b is a material entity consisting exactly of a plurality of objects as member_parts at all times at which b exists. (axiom label in BFO2 Reference: [025-004]) three-dimensional spatial region (forall (x) (if (ThreeDimensionalSpatialRegion x) (SpatialRegion x))) // axiom label in BFO2 CLIF: [040-001] 3d-s-region ThreeDimensionalSpatialRegion A three-dimensional spatial region is a spatial region that is of three dimensions. (axiom label in BFO2 Reference: [040-001]) a cube-shaped region of space a sphere-shaped region of space, A three-dimensional spatial region is a spatial region that is of three dimensions. (axiom label in BFO2 Reference: [040-001]) (forall (x) (if (ThreeDimensionalSpatialRegion x) (SpatialRegion x))) // axiom label in BFO2 CLIF: [040-001] site Site (forall (x) (if (Site x) (ImmaterialEntity x))) // axiom label in BFO2 CLIF: [034-002] a hole in the interior of a portion of cheese a rabbit hole an air traffic control region defined in the airspace above an airport b is a site means: b is a three-dimensional immaterial entity that is (partially or wholly) bounded by a material entity or it is a three-dimensional immaterial part thereof. (axiom label in BFO2 Reference: [034-002]) site Manhattan Canyon) the Grand Canyon the Piazza San Marco the cockpit of an aircraft the hold of a ship the interior of a kangaroo pouch the interior of the trunk of your car the interior of your bedroom the interior of your office the interior of your refrigerator the lumen of your gut your left nostril (a fiat part – the opening – of your left nasal cavity) b is a site means: b is a three-dimensional immaterial entity that is (partially or wholly) bounded by a material entity or it is a three-dimensional immaterial part thereof. (axiom label in BFO2 Reference: [034-002]) (forall (x) (if (Site x) (ImmaterialEntity x))) // axiom label in BFO2 CLIF: [034-002] object BFO 2 Reference: To say that b is causally unified means: b is a material entity which is such that its material parts are tied together in such a way that, in environments typical for entities of the type in question,if c, a continuant part of b that is in the interior of b at t, is larger than a certain threshold size (which will be determined differently from case to case, depending on factors such as porosity of external cover) and is moved in space to be at t at a location on the exterior of the spatial region that had been occupied by b at t, then either b’s other parts will be moved in coordinated fashion or b will be damaged (be affected, for example, by breakage or tearing) in the interval between t and t.causal changes in one part of b can have consequences for other parts of b without the mediation of any entity that lies on the exterior of b. Material entities with no proper material parts would satisfy these conditions trivially. Candidate examples of types of causal unity for material entities of more complex sorts are as follows (this is not intended to be an exhaustive list):CU1: Causal unity via physical coveringHere the parts in the interior of the unified entity are combined together causally through a common membrane or other physical covering\. The latter points outwards toward and may serve a protective function in relation to what lies on the exterior of the entity [13, 47 BFO 2 Reference: ‘objects’ are sometimes referred to as ‘grains’ [74 Object object BFO 2 Reference: BFO rests on the presupposition that at multiple micro-, meso- and macroscopic scales reality exhibits certain stable, spatially separated or separable material units, combined or combinable into aggregates of various sorts (for example organisms into what are called ‘populations’). Such units play a central role in almost all domains of natural science from particle physics to cosmology. Many scientific laws govern the units in question, employing general terms (such as ‘molecule’ or ‘planet’) referring to the types and subtypes of units, and also to the types and subtypes of the processes through which such units develop and interact. The division of reality into such natural units is at the heart of biological science, as also is the fact that these units may form higher-level units (as cells form multicellular organisms) and that they may also form aggregates of units, for example as cells form portions of tissue and organs form families, herds, breeds, species, and so on. At the same time, the division of certain portions of reality into engineered units (manufactured artifacts) is the basis of modern industrial technology, which rests on the distributed mass production of engineered parts through division of labor and on their assembly into larger, compound units such as cars and laptops. The division of portions of reality into units is one starting point for the phenomenon of counting. BFO 2 Reference: Each object is such that there are entities of which we can assert unproblematically that they lie in its interior, and other entities of which we can assert unproblematically that they lie in its exterior. This may not be so for entities lying at or near the boundary between the interior and exterior. This means that two objects – for example the two cells depicted in Figure 3 – may be such that there are material entities crossing their boundaries which belong determinately to neither cell. Something similar obtains in certain cases of conjoined twins (see below). BFO 2 Reference: an object is a maximal causally unified material entity atom b is an object means: b is a material entity which manifests causal unity of one or other of the types CUn listed above & is of a type (a material universal) instances of which are maximal relative to this criterion of causal unity. (axiom label in BFO2 Reference: [024-001]) cell cells and organisms engineered artifacts grain of sand molecule organelle organism planet solid portions of matter star b is an object means: b is a material entity which manifests causal unity of one or other of the types CUn listed above & is of a type (a material universal) instances of which are maximal relative to this criterion of causal unity. (axiom label in BFO2 Reference: [024-001]) generically dependent continuant gdc GenericallyDependentContinuant (iff (GenericallyDependentContinuant a) (and (Continuant a) (exists (b t) (genericallyDependsOnAt a b t)))) // axiom label in BFO2 CLIF: [074-001] The entries in your database are patterns instantiated as quality instances in your hard drive. The database itself is an aggregate of such patterns. When you create the database you create a particular instance of the generically dependent continuant type database. Each entry in the database is an instance of the generically dependent continuant type IAO: information content entity. b is a generically dependent continuant = Def. b is a continuant that g-depends_on one or more other entities. (axiom label in BFO2 Reference: [074-001]) the pdf file on your laptop, the pdf file that is a copy thereof on my laptop the sequence of this protein molecule; the sequence that is a copy thereof in that protein molecule. b is a generically dependent continuant = Def. b is a continuant that g-depends_on one or more other entities. (axiom label in BFO2 Reference: [074-001]) (iff (GenericallyDependentContinuant a) (and (Continuant a) (exists (b t) (genericallyDependsOnAt a b t)))) // axiom label in BFO2 CLIF: [074-001] function A function is a disposition that exists in virtue of the bearer’s physical make-up and this physical make-up is something the bearer possesses because it came into being, either through evolution (in the case of natural biological entities) or through intentional design (in the case of artifacts), in order to realize processes of a certain sort. (axiom label in BFO2 Reference: [064-001]) function (forall (x) (if (Function x) (Disposition x))) // axiom label in BFO2 CLIF: [064-001] BFO 2 Reference: In the past, we have distinguished two varieties of function, artifactual function and biological function. These are not asserted subtypes of BFO:function however, since the same function – for example: to pump, to transport – can exist both in artifacts and in biological entities. The asserted subtypes of function that would be needed in order to yield a separate monoheirarchy are not artifactual function, biological function, etc., but rather transporting function, pumping function, etc. Function the function of a hammer to drive in nails the function of a heart pacemaker to regulate the beating of a heart through electricity the function of amylase in saliva to break down starch into sugar (forall (x) (if (Function x) (Disposition x))) // axiom label in BFO2 CLIF: [064-001] A function is a disposition that exists in virtue of the bearer’s physical make-up and this physical make-up is something the bearer possesses because it came into being, either through evolution (in the case of natural biological entities) or through intentional design (in the case of artifacts), in order to realize processes of a certain sort. (axiom label in BFO2 Reference: [064-001]) process boundary ProcessBoundary p-boundary (iff (ProcessBoundary a) (exists (p) (and (Process p) (temporalPartOf a p) (not (exists (b) (properTemporalPartOf b a)))))) // axiom label in BFO2 CLIF: [084-001] (forall (x) (if (ProcessBoundary x) (exists (y) (and (ZeroDimensionalTemporalRegion y) (occupiesTemporalRegion x y))))) // axiom label in BFO2 CLIF: [085-002] Every process boundary occupies_temporal_region a zero-dimensional temporal region. (axiom label in BFO2 Reference: [085-002]) p is a process boundary =Def. p is a temporal part of a process & p has no proper temporal parts. (axiom label in BFO2 Reference: [084-001]) the boundary between the 2nd and 3rd year of your life. Every process boundary occupies_temporal_region a zero-dimensional temporal region. (axiom label in BFO2 Reference: [085-002]) p is a process boundary =Def. p is a temporal part of a process & p has no proper temporal parts. (axiom label in BFO2 Reference: [084-001]) (iff (ProcessBoundary a) (exists (p) (and (Process p) (temporalPartOf a p) (not (exists (b) (properTemporalPartOf b a)))))) // axiom label in BFO2 CLIF: [084-001] (forall (x) (if (ProcessBoundary x) (exists (y) (and (ZeroDimensionalTemporalRegion y) (occupiesTemporalRegion x y))))) // axiom label in BFO2 CLIF: [085-002] one-dimensional temporal region (forall (x) (if (OneDimensionalTemporalRegion x) (TemporalRegion x))) // axiom label in BFO2 CLIF: [103-001] 1d-t-region A one-dimensional temporal region is a temporal region that is extended. (axiom label in BFO2 Reference: [103-001]) BFO 2 Reference: A temporal interval is a special kind of one-dimensional temporal region, namely one that is self-connected (is without gaps or breaks). OneDimensionalTemporalRegion the temporal region during which a process occurs. (forall (x) (if (OneDimensionalTemporalRegion x) (TemporalRegion x))) // axiom label in BFO2 CLIF: [103-001] A one-dimensional temporal region is a temporal region that is extended. (axiom label in BFO2 Reference: [103-001]) material entity (forall (x) (if (MaterialEntity x) (IndependentContinuant x))) // axiom label in BFO2 CLIF: [019-002] material MaterialEntity (forall (x) (if (and (Entity x) (exists (y t) (and (MaterialEntity y) (continuantPartOfAt x y t)))) (MaterialEntity x))) // axiom label in BFO2 CLIF: [021-002] (forall (x) (if (and (Entity x) (exists (y t) (and (MaterialEntity y) (continuantPartOfAt y x t)))) (MaterialEntity x))) // axiom label in BFO2 CLIF: [020-002] A material entity is an independent continuant that has some portion of matter as proper or improper continuant part. (axiom label in BFO2 Reference: [019-002]) BFO 2 Reference: Material entities (continuants) can preserve their identity even while gaining and losing material parts. Continuants are contrasted with occurrents, which unfold themselves in successive temporal parts or phases [60 BFO 2 Reference: Object, Fiat Object Part and Object Aggregate are not intended to be exhaustive of Material Entity. Users are invited to propose new subcategories of Material Entity. BFO 2 Reference: ‘Matter’ is intended to encompass both mass and energy (we will address the ontological treatment of portions of energy in a later version of BFO). A portion of matter is anything that includes elementary particles among its proper or improper parts: quarks and leptons, including electrons, as the smallest particles thus far discovered; baryons (including protons and neutrons) at a higher level of granularity; atoms and molecules at still higher levels, forming the cells, organs, organisms and other material entities studied by biologists, the portions of rock studied by geologists, the fossils studied by paleontologists, and so on.Material entities are three-dimensional entities (entities extended in three spatial dimensions), as contrasted with the processes in which they participate, which are four-dimensional entities (entities extended also along the dimension of time).According to the FMA, material entities may have immaterial entities as parts – including the entities identified below as sites; for example the interior (or ‘lumen’) of your small intestine is a part of your body. BFO 2.0 embodies a decision to follow the FMA here. Every entity which has a material entity as continuant part is a material entity. (axiom label in BFO2 Reference: [020-002]) a flame a forest fire a human being a hurricane a photon a puff of smoke a sea wave a tornado an aggregate of human beings. an energy wave an epidemic every entity of which a material entity is continuant part is also a material entity. (axiom label in BFO2 Reference: [021-002]) the undetached arm of a human being (forall (x) (if (and (Entity x) (exists (y t) (and (MaterialEntity y) (continuantPartOfAt x y t)))) (MaterialEntity x))) // axiom label in BFO2 CLIF: [021-002] A material entity is an independent continuant that has some portion of matter as proper or improper continuant part. (axiom label in BFO2 Reference: [019-002]) every entity of which a material entity is continuant part is also a material entity. (axiom label in BFO2 Reference: [021-002]) (forall (x) (if (and (Entity x) (exists (y t) (and (MaterialEntity y) (continuantPartOfAt y x t)))) (MaterialEntity x))) // axiom label in BFO2 CLIF: [020-002] Every entity which has a material entity as continuant part is a material entity. (axiom label in BFO2 Reference: [020-002]) (forall (x) (if (MaterialEntity x) (IndependentContinuant x))) // axiom label in BFO2 CLIF: [019-002] continuant fiat boundary (iff (ContinuantFiatBoundary a) (and (ImmaterialEntity a) (exists (b) (and (or (ZeroDimensionalSpatialRegion b) (OneDimensionalSpatialRegion b) (TwoDimensionalSpatialRegion b)) (forall (t) (locatedInAt a b t)))) (not (exists (c t) (and (SpatialRegion c) (continuantPartOfAt c a t)))))) // axiom label in BFO2 CLIF: [029-001] BFO 2 Reference: In BFO 1.1 the assumption was made that the external surface of a material entity such as a cell could be treated as if it were a boundary in the mathematical sense. The new document propounds the view that when we talk about external surfaces of material objects in this way then we are talking about something fiat. To be dealt with in a future version: fiat boundaries at different levels of granularity.More generally, the focus in discussion of boundaries in BFO 2.0 is now on fiat boundaries, which means: boundaries for which there is no assumption that they coincide with physical discontinuities. The ontology of boundaries becomes more closely allied with the ontology of regions. Continuant fiat boundary doesn't have a closure axiom because the subclasses don't necessarily exhaust all possibilites. An example would be the mereological sum of two-dimensional continuant fiat boundary and a one dimensional continuant fiat boundary that doesn't overlap it. The situation is analogous to temporal and spatial regions. ContinuantFiatBoundary Every continuant fiat boundary is located at some spatial region at every time at which it exists cf-boundary BFO 2 Reference: a continuant fiat boundary is a boundary of some material entity (for example: the plane separating the Northern and Southern hemispheres; the North Pole), or it is a boundary of some immaterial entity (for example of some portion of airspace). Three basic kinds of continuant fiat boundary can be distinguished (together with various combination kinds [29 b is a continuant fiat boundary = Def. b is an immaterial entity that is of zero, one or two dimensions and does not include a spatial region as part. (axiom label in BFO2 Reference: [029-001]) (iff (ContinuantFiatBoundary a) (and (ImmaterialEntity a) (exists (b) (and (or (ZeroDimensionalSpatialRegion b) (OneDimensionalSpatialRegion b) (TwoDimensionalSpatialRegion b)) (forall (t) (locatedInAt a b t)))) (not (exists (c t) (and (SpatialRegion c) (continuantPartOfAt c a t)))))) // axiom label in BFO2 CLIF: [029-001] Continuant fiat boundary doesn't have a closure axiom because the subclasses don't necessarily exhaust all possibilites. An example would be the mereological sum of two-dimensional continuant fiat boundary and a one dimensional continuant fiat boundary that doesn't overlap it. The situation is analogous to temporal and spatial regions. b is a continuant fiat boundary = Def. b is an immaterial entity that is of zero, one or two dimensions and does not include a spatial region as part. (axiom label in BFO2 Reference: [029-001]) immaterial entity immaterial ImmaterialEntity BFO 2 Reference: Immaterial entities are divided into two subgroups:boundaries and sites, which bound, or are demarcated in relation, to material entities, and which can thus change location, shape and size and as their material hosts move or change shape or size (for example: your nasal passage; the hold of a ship; the boundary of Wales (which moves with the rotation of the Earth) [38, 7, 10 one-dimensional continuant fiat boundary OneDimensionalContinuantFiatBoundary (iff (OneDimensionalContinuantFiatBoundary a) (and (ContinuantFiatBoundary a) (exists (b) (and (OneDimensionalSpatialRegion b) (forall (t) (locatedInAt a b t)))))) // axiom label in BFO2 CLIF: [032-001] 1d-cf-boundary The Equator a one-dimensional continuant fiat boundary is a continuous fiat line whose location is defined in relation to some material entity. (axiom label in BFO2 Reference: [032-001]) all geopolitical boundaries all lines of latitude and longitude the line separating the outer surface of the mucosa of the lower lip from the outer surface of the skin of the chin. the median sulcus of your tongue (iff (OneDimensionalContinuantFiatBoundary a) (and (ContinuantFiatBoundary a) (exists (b) (and (OneDimensionalSpatialRegion b) (forall (t) (locatedInAt a b t)))))) // axiom label in BFO2 CLIF: [032-001] a one-dimensional continuant fiat boundary is a continuous fiat line whose location is defined in relation to some material entity. (axiom label in BFO2 Reference: [032-001]) process profile (forall (x y) (if (processProfileOf x y) (and (properContinuantPartOf x y) (exists (z t) (and (properOccurrentPartOf z y) (TemporalRegion t) (occupiesSpatioTemporalRegion x t) (occupiesSpatioTemporalRegion y t) (occupiesSpatioTemporalRegion z t) (not (exists (w) (and (occurrentPartOf w x) (occurrentPartOf w z))))))))) // axiom label in BFO2 CLIF: [094-005] ProcessProfile One important sub-family of rate process profiles is illustrated by the beat or frequency profiles of cyclical processes, illustrated by the 60 beats per minute beating process of John’s heart, or the 120 beats per minute drumming process involved in one of John’s performances in a rock band, and so on. Each such process includes what we shall call a beat process profile instance as part, a subtype of rate process profile in which the salient ratio is not distance covered but rather number of beat cycles per unit of time. Each beat process profile instance instantiates the determinable universal beat process profile. But it also instantiates multiple more specialized universals at lower levels of generality, selected from rate process profilebeat process profileregular beat process profile3 bpm beat process profile4 bpm beat process profileirregular beat process profileincreasing beat process profileand so on.In the case of a regular beat process profile, a rate can be assigned in the simplest possible fashion by dividing the number of cycles by the length of the temporal region occupied by the beating process profile as a whole. Irregular process profiles of this sort, for example as identified in the clinic, or in the readings on an aircraft instrument panel, are often of diagnostic significance. The simplest type of process profiles are what we shall call ‘quality process profiles’, which are the process profiles which serve as the foci of the sort of selective abstraction that is involved when measurements are made of changes in single qualities, as illustrated, for example, by process profiles of mass, temperature, aortic pressure, and so on. process-profile (iff (ProcessProfile a) (exists (b) (and (Process b) (processProfileOf a b)))) // axiom label in BFO2 CLIF: [093-002] On a somewhat higher level of complexity are what we shall call rate process profiles, which are the targets of selective abstraction focused not on determinate quality magnitudes plotted over time, but rather on certain ratios between these magnitudes and elapsed times. A speed process profile, for example, is represented by a graph plotting against time the ratio of distance covered per unit of time. Since rates may change, and since such changes, too, may have rates of change, we have to deal here with a hierarchy of process profile universals at successive levels b is a process_profile =Def. there is some process c such that b process_profile_of c (axiom label in BFO2 Reference: [093-002]) b process_profile_of c holds when b proper_occurrent_part_of c& there is some proper_occurrent_part d of c which has no parts in common with b & is mutually dependent on b& is such that b, c and d occupy the same temporal region (axiom label in BFO2 Reference: [094-005]) (forall (x y) (if (processProfileOf x y) (and (properContinuantPartOf x y) (exists (z t) (and (properOccurrentPartOf z y) (TemporalRegion t) (occupiesSpatioTemporalRegion x t) (occupiesSpatioTemporalRegion y t) (occupiesSpatioTemporalRegion z t) (not (exists (w) (and (occurrentPartOf w x) (occurrentPartOf w z))))))))) // axiom label in BFO2 CLIF: [094-005] b process_profile_of c holds when b proper_occurrent_part_of c& there is some proper_occurrent_part d of c which has no parts in common with b & is mutually dependent on b& is such that b, c and d occupy the same temporal region (axiom label in BFO2 Reference: [094-005]) (iff (ProcessProfile a) (exists (b) (and (Process b) (processProfileOf a b)))) // axiom label in BFO2 CLIF: [093-002] b is a process_profile =Def. there is some process c such that b process_profile_of c (axiom label in BFO2 Reference: [093-002]) relational quality (iff (RelationalQuality a) (exists (b c t) (and (IndependentContinuant b) (IndependentContinuant c) (qualityOfAt a b t) (qualityOfAt a c t)))) // axiom label in BFO2 CLIF: [057-001] John’s role of husband to Mary is dependent on Mary’s role of wife to John, and both are dependent on the object aggregate comprising John and Mary as member parts joined together through the relational quality of being married. RelationalQuality a marriage bond, an instance of love, an obligation between one person and another. b is a relational quality = Def. for some independent continuants c, d and for some time t: b quality_of c at t & b quality_of d at t. (axiom label in BFO2 Reference: [057-001]) r-quality (iff (RelationalQuality a) (exists (b c t) (and (IndependentContinuant b) (IndependentContinuant c) (qualityOfAt a b t) (qualityOfAt a c t)))) // axiom label in BFO2 CLIF: [057-001] b is a relational quality = Def. for some independent continuants c, d and for some time t: b quality_of c at t & b quality_of d at t. (axiom label in BFO2 Reference: [057-001]) two-dimensional continuant fiat boundary 2d-cf-boundary TwoDimensionalContinuantFiatBoundary (iff (TwoDimensionalContinuantFiatBoundary a) (and (ContinuantFiatBoundary a) (exists (b) (and (TwoDimensionalSpatialRegion b) (forall (t) (locatedInAt a b t)))))) // axiom label in BFO2 CLIF: [033-001] a two-dimensional continuant fiat boundary (surface) is a self-connected fiat surface whose location is defined in relation to some material entity. (axiom label in BFO2 Reference: [033-001]) a two-dimensional continuant fiat boundary (surface) is a self-connected fiat surface whose location is defined in relation to some material entity. (axiom label in BFO2 Reference: [033-001]) (iff (TwoDimensionalContinuantFiatBoundary a) (and (ContinuantFiatBoundary a) (exists (b) (and (TwoDimensionalSpatialRegion b) (forall (t) (locatedInAt a b t)))))) // axiom label in BFO2 CLIF: [033-001] zero-dimensional continuant fiat boundary (iff (ZeroDimensionalContinuantFiatBoundary a) (and (ContinuantFiatBoundary a) (exists (b) (and (ZeroDimensionalSpatialRegion b) (forall (t) (locatedInAt a b t)))))) // axiom label in BFO2 CLIF: [031-001] 0d-cf-boundary ZeroDimensionalContinuantFiatBoundary a zero-dimensional continuant fiat boundary is a fiat point whose location is defined in relation to some material entity. (axiom label in BFO2 Reference: [031-001]) the geographic North Pole the point of origin of some spatial coordinate system. the quadripoint where the boundaries of Colorado, Utah, New Mexico, and Arizona meet zero dimension continuant fiat boundaries are not spatial points. Considering the example 'the quadripoint where the boundaries of Colorado, Utah, New Mexico, and Arizona meet' : There are many frames in which that point is zooming through many points in space. Whereas, no matter what the frame, the quadripoint is always in the same relation to the boundaries of Colorado, Utah, New Mexico, and Arizona. (iff (ZeroDimensionalContinuantFiatBoundary a) (and (ContinuantFiatBoundary a) (exists (b) (and (ZeroDimensionalSpatialRegion b) (forall (t) (locatedInAt a b t)))))) // axiom label in BFO2 CLIF: [031-001] a zero-dimensional continuant fiat boundary is a fiat point whose location is defined in relation to some material entity. (axiom label in BFO2 Reference: [031-001]) requested by Melanie Courtot zero dimension continuant fiat boundaries are not spatial points. Considering the example 'the quadripoint where the boundaries of Colorado, Utah, New Mexico, and Arizona meet' : There are many frames in which that point is zooming through many points in space. Whereas, no matter what the frame, the quadripoint is always in the same relation to the boundaries of Colorado, Utah, New Mexico, and Arizona. zero-dimensional temporal region 0d-t-region (forall (x) (if (ZeroDimensionalTemporalRegion x) (TemporalRegion x))) // axiom label in BFO2 CLIF: [102-001] A zero-dimensional temporal region is a temporal region that is without extent. (axiom label in BFO2 Reference: [102-001]) ZeroDimensionalTemporalRegion a temporal region that is occupied by a process boundary right now temporal instant. the moment at which a child is born the moment at which a finger is detached in an industrial accident the moment of death. (forall (x) (if (ZeroDimensionalTemporalRegion x) (TemporalRegion x))) // axiom label in BFO2 CLIF: [102-001] A zero-dimensional temporal region is a temporal region that is without extent. (axiom label in BFO2 Reference: [102-001]) history A history is a process that is the sum of the totality of processes taking place in the spatiotemporal region occupied by a material entity or site, including processes on the surface of the entity or within the cavities to which it serves as host. (axiom label in BFO2 Reference: [138-001]) History history A history is a process that is the sum of the totality of processes taking place in the spatiotemporal region occupied by a material entity or site, including processes on the surface of the entity or within the cavities to which it serves as host. (axiom label in BFO2 Reference: [138-001]) Person:Alan Ruttenberg To say that each spatiotemporal region s temporally_projects_onto some temporal region t is to say that t is the temporal extension of s. (axiom label in BFO2 Reference: [080-003]) To say that spatiotemporal region s spatially_projects_onto spatial region r at t is to say that r is the spatial extent of s at t. (axiom label in BFO2 Reference: [081-003]) To say that each spatiotemporal region s temporally_projects_onto some temporal region t is to say that t is the temporal extension of s. (axiom label in BFO2 Reference: [080-003]) To say that spatiotemporal region s spatially_projects_onto spatial region r at t is to say that r is the spatial extent of s at t. (axiom label in BFO2 Reference: [081-003])