(kicad_pcb (version 20211014) (generator kiutils)

  (general
    (thickness 1.6)
  )

  (paper "A4")
  (layers
    (0 "F.Cu" signal)
    (3 "In3.Cu" signal)
    (1 "In1.Cu" signal)
    (2 "In2.Cu" signal)
    (4 "In4.Cu" signal)
    (31 "B.Cu" signal)
    (32 "B.Adhes" user "B.Adhesive")
    (33 "F.Adhes" user "F.Adhesive")
    (34 "B.Paste" user)
    (35 "F.Paste" user)
    (36 "B.SilkS" user "B.Silkscreen")
    (37 "F.SilkS" user "F.Silkscreen")
    (38 "B.Mask" user)
    (39 "F.Mask" user)
    (40 "Dwgs.User" user "User.Drawings")
    (41 "Cmts.User" user "User.Comments")
    (42 "Eco1.User" user "User.Eco1")
    (43 "Eco2.User" user "User.Eco2")
    (44 "Edge.Cuts" user)
    (45 "Margin" user)
    (46 "B.CrtYd" user "B.Courtyard")
    (47 "F.CrtYd" user "F.Courtyard")
    (48 "B.Fab" user)
    (49 "F.Fab" user)
  )

  (setup
    (pad_to_mask_clearance 0.0)
  )

  (net 1 "+3V3")
  (net 2 "COIL_FAULT")
  (net 3 "COIL_REF")
  (net 4 "COIL_SENSE")
  (net 5 "HS_FAULT")
  (net 6 "HS_REF")
  (net 7 "HS_SENSE")
  (net 8 "gnd")

  (footprint "Capacitor_SMD:C_0603_1608Metric" (version 20260206) (generator kicad-footprint-generator) (layer "F.Cu")
    (tedit 560552e3) (tstamp 86943b10-dd15-7d6b-931e-fe5b37101e7b)
    (at 15.0 14.0 90.0)
    (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
    (tags "capacitor")
    (property "Reference" "C1" (at 0 -1.43 0) (layer "F.Fab") (hide yes) (effects (font (size 1 1) (thickness 0.15))))
    (property "Value" "100nF +/- 10%" (at 0 1.43 0) (layer "F.Fab") (hide yes) (effects (font (size 1 1) (thickness 0.15))))
    (property "Footprint" "Capacitor_SMD:C_0603_1608Metric")
    (property "Sheetpath" "hs_filter")
    (attr smd)
    (fp_line (start -0.14058 -0.51) (end 0.14058 -0.51) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_line (start -0.14058 0.51) (end 0.14058 0.51) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_rect (start -1.48 -0.73) (end 1.48 0.73) (layer "F.CrtYd") (stroke (width 0.05) (type solid)) (fill no))
    (fp_rect (start -0.8 -0.4) (end 0.8 0.4) (layer "F.Fab") (stroke (width 0.1) (type solid)) (fill no))
    (fp_text user "${REFERENCE}" (at 0 0 0) (layer "F.Fab")
      (effects (font (size 0.4 0.4) (thickness 0.06)))
    )
    (pad "1" smd roundrect (at -0.775 0) (size 0.9 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25)
      (net 7 "HS_SENSE"))
    (pad "2" smd roundrect (at 0.775 0) (size 0.9 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25)
      (net 8 "gnd"))
    (model "${KICAD10_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.step"
      (offset (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (footprint "Capacitor_SMD:C_0603_1608Metric" (version 20260206) (generator kicad-footprint-generator) (layer "F.Cu")
    (tedit d5d257fd) (tstamp e17fe53c-e620-dcca-d7f4-6da435986d4a)
    (at 41.0 10.0 90.0)
    (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
    (tags "capacitor")
    (property "Reference" "C2" (at 0 -1.43 0) (layer "F.Fab") (hide yes) (effects (font (size 1 1) (thickness 0.15))))
    (property "Value" "100nF +/- 10%" (at 0 1.43 0) (layer "F.Fab") (hide yes) (effects (font (size 1 1) (thickness 0.15))))
    (property "Footprint" "Capacitor_SMD:C_0603_1608Metric")
    (property "Sheetpath" "hs_bypass")
    (attr smd)
    (fp_line (start -0.14058 -0.51) (end 0.14058 -0.51) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_line (start -0.14058 0.51) (end 0.14058 0.51) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_rect (start -1.48 -0.73) (end 1.48 0.73) (layer "F.CrtYd") (stroke (width 0.05) (type solid)) (fill no))
    (fp_rect (start -0.8 -0.4) (end 0.8 0.4) (layer "F.Fab") (stroke (width 0.1) (type solid)) (fill no))
    (fp_text user "${REFERENCE}" (at 0 0 0) (layer "F.Fab")
      (effects (font (size 0.4 0.4) (thickness 0.06)))
    )
    (pad "1" smd roundrect (at -0.775 0) (size 0.9 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25)
      (net 1 "+3V3"))
    (pad "2" smd roundrect (at 0.775 0) (size 0.9 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25)
      (net 8 "gnd"))
    (model "${KICAD10_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.step"
      (offset (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (footprint "Capacitor_SMD:C_0603_1608Metric" (version 20260206) (generator kicad-footprint-generator) (layer "F.Cu")
    (tedit d2690b83) (tstamp e88eac6e-a9c9-60ae-0458-1ce4f982dab2)
    (at 15.0 32.0 90.0)
    (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
    (tags "capacitor")
    (property "Reference" "C3" (at 0 -1.43 0) (layer "F.Fab") (hide yes) (effects (font (size 1 1) (thickness 0.15))))
    (property "Value" "100nF +/- 10%" (at 0 1.43 0) (layer "F.Fab") (hide yes) (effects (font (size 1 1) (thickness 0.15))))
    (property "Footprint" "Capacitor_SMD:C_0603_1608Metric")
    (property "Sheetpath" "coil_filter")
    (attr smd)
    (fp_line (start -0.14058 -0.51) (end 0.14058 -0.51) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_line (start -0.14058 0.51) (end 0.14058 0.51) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_rect (start -1.48 -0.73) (end 1.48 0.73) (layer "F.CrtYd") (stroke (width 0.05) (type solid)) (fill no))
    (fp_rect (start -0.8 -0.4) (end 0.8 0.4) (layer "F.Fab") (stroke (width 0.1) (type solid)) (fill no))
    (fp_text user "${REFERENCE}" (at 0 0 0) (layer "F.Fab")
      (effects (font (size 0.4 0.4) (thickness 0.06)))
    )
    (pad "1" smd roundrect (at -0.775 0) (size 0.9 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25)
      (net 4 "COIL_SENSE"))
    (pad "2" smd roundrect (at 0.775 0) (size 0.9 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25)
      (net 8 "gnd"))
    (model "${KICAD10_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.step"
      (offset (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (footprint "Capacitor_SMD:C_0603_1608Metric" (version 20260206) (generator kicad-footprint-generator) (layer "F.Cu")
    (tedit 938bcc59) (tstamp 11c1b6d4-1cff-7788-75c6-d8d63ea17fd9)
    (at 41.0 28.0 90.0)
    (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
    (tags "capacitor")
    (property "Reference" "C4" (at 0 -1.43 0) (layer "F.Fab") (hide yes) (effects (font (size 1 1) (thickness 0.15))))
    (property "Value" "100nF +/- 10%" (at 0 1.43 0) (layer "F.Fab") (hide yes) (effects (font (size 1 1) (thickness 0.15))))
    (property "Footprint" "Capacitor_SMD:C_0603_1608Metric")
    (property "Sheetpath" "coil_bypass")
    (attr smd)
    (fp_line (start -0.14058 -0.51) (end 0.14058 -0.51) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_line (start -0.14058 0.51) (end 0.14058 0.51) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_rect (start -1.48 -0.73) (end 1.48 0.73) (layer "F.CrtYd") (stroke (width 0.05) (type solid)) (fill no))
    (fp_rect (start -0.8 -0.4) (end 0.8 0.4) (layer "F.Fab") (stroke (width 0.1) (type solid)) (fill no))
    (fp_text user "${REFERENCE}" (at 0 0 0) (layer "F.Fab")
      (effects (font (size 0.4 0.4) (thickness 0.06)))
    )
    (pad "1" smd roundrect (at -0.775 0) (size 0.9 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25)
      (net 1 "+3V3"))
    (pad "2" smd roundrect (at 0.775 0) (size 0.9 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25)
      (net 8 "gnd"))
    (model "${KICAD10_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.step"
      (offset (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (footprint "Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical" (version 20260206) (generator kicad-footprint-generator) (layer "F.Cu")
    (tedit e62cd140) (tstamp b1e91966-9f48-3214-d09c-879fc9dfdd37)
    (at 6.0 10.0 270.0)
    (descr "JST XH series connector, B2B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf)")
    (tags "connector JST XH vertical")
    (property "Reference" "J1" (at 0 -1.43 0) (layer "F.Fab") (hide yes) (effects (font (size 1 1) (thickness 0.15))))
    (property "Value" "B2B-XH-A(LF)(SN)" (at 0 1.43 0) (layer "F.Fab") (hide yes) (effects (font (size 1 1) (thickness 0.15))))
    (property "Footprint" "Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical")
    (property "Sheetpath" "heatsink_probe")
    (attr through_hole)
    (fp_line (start -2.85 -2.75) (end -2.85 -1.5) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_line (start -2.55 -0.2) (end -1.8 -0.2) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_line (start -1.8 -0.2) (end -1.8 2.75) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_line (start -1.8 2.75) (end 1.25 2.75) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_line (start -1.6 -2.75) (end -2.85 -2.75) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_line (start 4.3 -0.2) (end 4.3 2.75) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_line (start 4.3 2.75) (end 1.25 2.75) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_line (start 5.05 -0.2) (end 4.3 -0.2) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_rect (start -2.56 -2.46) (end 5.06 3.51) (layer "F.SilkS") (stroke (width 0.12) (type solid)) (fill no))
    (fp_rect (start -2.55 -2.45) (end -0.75 -1.7) (layer "F.SilkS") (stroke (width 0.12) (type solid)) (fill no))
    (fp_rect (start 0.75 -2.45) (end 1.75 -1.7) (layer "F.SilkS") (stroke (width 0.12) (type solid)) (fill no))
    (fp_rect (start 3.25 -2.45) (end 5.05 -1.7) (layer "F.SilkS") (stroke (width 0.12) (type solid)) (fill no))
    (fp_rect (start -2.95 -2.85) (end 5.45 3.9) (layer "F.CrtYd") (stroke (width 0.05) (type solid)) (fill no))
    (fp_line (start -0.625 -2.35) (end 0 -1.35) (layer "F.Fab") (stroke (width 0.1) (type solid)))
    (fp_line (start 0 -1.35) (end 0.625 -2.35) (layer "F.Fab") (stroke (width 0.1) (type solid)))
    (fp_rect (start -2.45 -2.35) (end 4.95 3.4) (layer "F.Fab") (stroke (width 0.1) (type solid)) (fill no))
    (fp_text user "${REFERENCE}" (at 1.25 2.7 0) (layer "F.Fab")
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (pad "1" thru_hole roundrect (at 0 0) (size 1.7 2) (drill 1) (layers *.Cu *.Mask) (remove_unused_layers) (roundrect_rratio 0.147059)
      (net 7 "HS_SENSE"))
    (pad "2" thru_hole oval (at 2.5 0) (size 1.7 2) (drill 1) (layers *.Cu *.Mask) (remove_unused_layers)
      (net 8 "gnd"))
    (model "${KICAD10_3DMODEL_DIR}/Connector_JST.3dshapes/JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical.step"
      (offset (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (footprint "Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical" (version 20260206) (generator kicad-footprint-generator) (layer "F.Cu")
    (tedit 068f06e7) (tstamp 796c595e-074f-cdf4-ef0e-0c81065586ac)
    (at 6.0 28.0 270.0)
    (descr "JST XH series connector, B2B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf)")
    (tags "connector JST XH vertical")
    (property "Reference" "J2" (at 0 -1.43 0) (layer "F.Fab") (hide yes) (effects (font (size 1 1) (thickness 0.15))))
    (property "Value" "B2B-XH-A(LF)(SN)" (at 0 1.43 0) (layer "F.Fab") (hide yes) (effects (font (size 1 1) (thickness 0.15))))
    (property "Footprint" "Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical")
    (property "Sheetpath" "coil_probe")
    (attr through_hole)
    (fp_line (start -2.85 -2.75) (end -2.85 -1.5) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_line (start -2.55 -0.2) (end -1.8 -0.2) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_line (start -1.8 -0.2) (end -1.8 2.75) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_line (start -1.8 2.75) (end 1.25 2.75) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_line (start -1.6 -2.75) (end -2.85 -2.75) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_line (start 4.3 -0.2) (end 4.3 2.75) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_line (start 4.3 2.75) (end 1.25 2.75) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_line (start 5.05 -0.2) (end 4.3 -0.2) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_rect (start -2.56 -2.46) (end 5.06 3.51) (layer "F.SilkS") (stroke (width 0.12) (type solid)) (fill no))
    (fp_rect (start -2.55 -2.45) (end -0.75 -1.7) (layer "F.SilkS") (stroke (width 0.12) (type solid)) (fill no))
    (fp_rect (start 0.75 -2.45) (end 1.75 -1.7) (layer "F.SilkS") (stroke (width 0.12) (type solid)) (fill no))
    (fp_rect (start 3.25 -2.45) (end 5.05 -1.7) (layer "F.SilkS") (stroke (width 0.12) (type solid)) (fill no))
    (fp_rect (start -2.95 -2.85) (end 5.45 3.9) (layer "F.CrtYd") (stroke (width 0.05) (type solid)) (fill no))
    (fp_line (start -0.625 -2.35) (end 0 -1.35) (layer "F.Fab") (stroke (width 0.1) (type solid)))
    (fp_line (start 0 -1.35) (end 0.625 -2.35) (layer "F.Fab") (stroke (width 0.1) (type solid)))
    (fp_rect (start -2.45 -2.35) (end 4.95 3.4) (layer "F.Fab") (stroke (width 0.1) (type solid)) (fill no))
    (fp_text user "${REFERENCE}" (at 1.25 2.7 0) (layer "F.Fab")
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (pad "1" thru_hole roundrect (at 0 0) (size 1.7 2) (drill 1) (layers *.Cu *.Mask) (remove_unused_layers) (roundrect_rratio 0.147059)
      (net 4 "COIL_SENSE"))
    (pad "2" thru_hole oval (at 2.5 0) (size 1.7 2) (drill 1) (layers *.Cu *.Mask) (remove_unused_layers)
      (net 8 "gnd"))
    (model "${KICAD10_3DMODEL_DIR}/Connector_JST.3dshapes/JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical.step"
      (offset (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (footprint "Connector_JST:JST_XH_B6B-XH-A_1x06_P2.50mm_Vertical" (version 20260206) (generator kicad-footprint-generator) (layer "F.Cu")
    (tedit c42f7d9a) (tstamp 0123b52e-e2a1-8bdb-9543-a5c019857b93)
    (at 57.0 6.0 270.0)
    (descr "JST XH series connector, B6B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf)")
    (tags "connector JST XH vertical")
    (property "Reference" "J3" (at 0 -1.43 0) (layer "F.Fab") (hide yes) (effects (font (size 1 1) (thickness 0.15))))
    (property "Value" "B6B-XH-A(LF)(SN)" (at 0 1.43 0) (layer "F.Fab") (hide yes) (effects (font (size 1 1) (thickness 0.15))))
    (property "Footprint" "Connector_JST:JST_XH_B6B-XH-A_1x06_P2.50mm_Vertical")
    (property "Sheetpath" "host")
    (attr through_hole)
    (fp_line (start -2.85 -2.75) (end -2.85 -1.5) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_line (start -2.55 -0.2) (end -1.8 -0.2) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_line (start -1.8 -0.2) (end -1.8 2.75) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_line (start -1.8 2.75) (end 6.25 2.75) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_line (start -1.6 -2.75) (end -2.85 -2.75) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_line (start 14.3 -0.2) (end 14.3 2.75) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_line (start 14.3 2.75) (end 6.25 2.75) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_line (start 15.05 -0.2) (end 14.3 -0.2) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_rect (start -2.56 -2.46) (end 15.06 3.51) (layer "F.SilkS") (stroke (width 0.12) (type solid)) (fill no))
    (fp_rect (start -2.55 -2.45) (end -0.75 -1.7) (layer "F.SilkS") (stroke (width 0.12) (type solid)) (fill no))
    (fp_rect (start 0.75 -2.45) (end 11.75 -1.7) (layer "F.SilkS") (stroke (width 0.12) (type solid)) (fill no))
    (fp_rect (start 13.25 -2.45) (end 15.05 -1.7) (layer "F.SilkS") (stroke (width 0.12) (type solid)) (fill no))
    (fp_rect (start -2.95 -2.85) (end 15.45 3.9) (layer "F.CrtYd") (stroke (width 0.05) (type solid)) (fill no))
    (fp_line (start -0.625 -2.35) (end 0 -1.35) (layer "F.Fab") (stroke (width 0.1) (type solid)))
    (fp_line (start 0 -1.35) (end 0.625 -2.35) (layer "F.Fab") (stroke (width 0.1) (type solid)))
    (fp_rect (start -2.45 -2.35) (end 14.95 3.4) (layer "F.Fab") (stroke (width 0.1) (type solid)) (fill no))
    (fp_text user "${REFERENCE}" (at 6.25 2.7 0) (layer "F.Fab")
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (pad "1" thru_hole roundrect (at 0 0) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (remove_unused_layers) (roundrect_rratio 0.147059)
      (net 1 "+3V3"))
    (pad "2" thru_hole oval (at 2.5 0) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (remove_unused_layers)
      (net 8 "gnd"))
    (pad "3" thru_hole oval (at 5 0) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (remove_unused_layers)
      (net 5 "HS_FAULT"))
    (pad "4" thru_hole oval (at 7.5 0) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (remove_unused_layers)
      (net 2 "COIL_FAULT"))
    (pad "5" thru_hole oval (at 10 0) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (remove_unused_layers)
      (net 7 "HS_SENSE"))
    (pad "6" thru_hole oval (at 12.5 0) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (remove_unused_layers)
      (net 4 "COIL_SENSE"))
    (model "${KICAD10_3DMODEL_DIR}/Connector_JST.3dshapes/JST_XH_B6B-XH-A_1x06_P2.50mm_Vertical.step"
      (offset (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (footprint "Resistor_SMD:R_0603_1608Metric" (version 20260206) (generator kicad-footprint-generator) (layer "F.Cu")
    (tedit c54fd725) (tstamp 825a84d9-4735-f333-d3ac-8c01ea9e7c68)
    (at 15.0 8.0)
    (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
    (tags "resistor")
    (property "Reference" "R1" (at 0 -1.43 0) (layer "F.Fab") (hide yes) (effects (font (size 1 1) (thickness 0.15))))
    (property "Value" "10kohm +/- 1%" (at 0 1.43 0) (layer "F.Fab") (hide yes) (effects (font (size 1 1) (thickness 0.15))))
    (property "Footprint" "Resistor_SMD:R_0603_1608Metric")
    (property "Sheetpath" "hs_fixed")
    (attr smd)
    (fp_line (start -0.237258 -0.5225) (end 0.237258 -0.5225) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_line (start -0.237258 0.5225) (end 0.237258 0.5225) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_rect (start -1.48 -0.73) (end 1.48 0.73) (layer "F.CrtYd") (stroke (width 0.05) (type solid)) (fill no))
    (fp_rect (start -0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (stroke (width 0.1) (type solid)) (fill no))
    (fp_text user "${REFERENCE}" (at 0 0 0) (layer "F.Fab")
      (effects (font (size 0.4 0.4) (thickness 0.06)))
    )
    (pad "1" smd roundrect (at -0.825 0) (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25)
      (net 1 "+3V3"))
    (pad "2" smd roundrect (at 0.825 0) (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25)
      (net 7 "HS_SENSE"))
    (model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.step"
      (offset (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (footprint "Resistor_SMD:R_0603_1608Metric" (version 20260206) (generator kicad-footprint-generator) (layer "F.Cu")
    (tedit 23da9252) (tstamp 5f0f2866-b251-b169-09b8-8fd0dd94705e)
    (at 27.0 6.0 90.0)
    (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
    (tags "resistor")
    (property "Reference" "R2" (at 0 -1.43 0) (layer "F.Fab") (hide yes) (effects (font (size 1 1) (thickness 0.15))))
    (property "Value" "9.09kohm +/- 1%" (at 0 1.43 0) (layer "F.Fab") (hide yes) (effects (font (size 1 1) (thickness 0.15))))
    (property "Footprint" "Resistor_SMD:R_0603_1608Metric")
    (property "Sheetpath" "hs_top")
    (attr smd)
    (fp_line (start -0.237258 -0.5225) (end 0.237258 -0.5225) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_line (start -0.237258 0.5225) (end 0.237258 0.5225) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_rect (start -1.48 -0.73) (end 1.48 0.73) (layer "F.CrtYd") (stroke (width 0.05) (type solid)) (fill no))
    (fp_rect (start -0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (stroke (width 0.1) (type solid)) (fill no))
    (fp_text user "${REFERENCE}" (at 0 0 0) (layer "F.Fab")
      (effects (font (size 0.4 0.4) (thickness 0.06)))
    )
    (pad "1" smd roundrect (at -0.825 0) (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25)
      (net 1 "+3V3"))
    (pad "2" smd roundrect (at 0.825 0) (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25)
      (net 6 "HS_REF"))
    (model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.step"
      (offset (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (footprint "Resistor_SMD:R_0603_1608Metric" (version 20260206) (generator kicad-footprint-generator) (layer "F.Cu")
    (tedit 80537007) (tstamp ea19c8c7-a01d-0a09-c822-1b25bb91bcf9)
    (at 23.0 13.0 90.0)
    (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
    (tags "resistor")
    (property "Reference" "R3" (at 0 -1.43 0) (layer "F.Fab") (hide yes) (effects (font (size 1 1) (thickness 0.15))))
    (property "Value" "11.5kohm +/- 1%" (at 0 1.43 0) (layer "F.Fab") (hide yes) (effects (font (size 1 1) (thickness 0.15))))
    (property "Footprint" "Resistor_SMD:R_0603_1608Metric")
    (property "Sheetpath" "hs_bottom")
    (attr smd)
    (fp_line (start -0.237258 -0.5225) (end 0.237258 -0.5225) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_line (start -0.237258 0.5225) (end 0.237258 0.5225) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_rect (start -1.48 -0.73) (end 1.48 0.73) (layer "F.CrtYd") (stroke (width 0.05) (type solid)) (fill no))
    (fp_rect (start -0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (stroke (width 0.1) (type solid)) (fill no))
    (fp_text user "${REFERENCE}" (at 0 0 0) (layer "F.Fab")
      (effects (font (size 0.4 0.4) (thickness 0.06)))
    )
    (pad "1" smd roundrect (at -0.825 0) (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25)
      (net 6 "HS_REF"))
    (pad "2" smd roundrect (at 0.825 0) (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25)
      (net 8 "gnd"))
    (model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.step"
      (offset (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (footprint "Resistor_SMD:R_0603_1608Metric" (version 20260206) (generator kicad-footprint-generator) (layer "F.Cu")
    (tedit 980024f0) (tstamp 230461db-d665-3d35-566b-4e7ca95955db)
    (at 32.0 6.0)
    (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
    (tags "resistor")
    (property "Reference" "R4" (at 0 -1.43 0) (layer "F.Fab") (hide yes) (effects (font (size 1 1) (thickness 0.15))))
    (property "Value" "34.8kohm +/- 1%" (at 0 1.43 0) (layer "F.Fab") (hide yes) (effects (font (size 1 1) (thickness 0.15))))
    (property "Footprint" "Resistor_SMD:R_0603_1608Metric")
    (property "Sheetpath" "hs_hyst")
    (attr smd)
    (fp_line (start -0.237258 -0.5225) (end 0.237258 -0.5225) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_line (start -0.237258 0.5225) (end 0.237258 0.5225) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_rect (start -1.48 -0.73) (end 1.48 0.73) (layer "F.CrtYd") (stroke (width 0.05) (type solid)) (fill no))
    (fp_rect (start -0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (stroke (width 0.1) (type solid)) (fill no))
    (fp_text user "${REFERENCE}" (at 0 0 0) (layer "F.Fab")
      (effects (font (size 0.4 0.4) (thickness 0.06)))
    )
    (pad "1" smd roundrect (at -0.825 0) (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25)
      (net 6 "HS_REF"))
    (pad "2" smd roundrect (at 0.825 0) (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25)
      (net 5 "HS_FAULT"))
    (model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.step"
      (offset (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (footprint "Resistor_SMD:R_0603_1608Metric" (version 20260206) (generator kicad-footprint-generator) (layer "F.Cu")
    (tedit a41fe49b) (tstamp 8daec00c-d349-82e8-3e3c-f5417602eefc)
    (at 15.0 26.0)
    (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
    (tags "resistor")
    (property "Reference" "R5" (at 0 -1.43 0) (layer "F.Fab") (hide yes) (effects (font (size 1 1) (thickness 0.15))))
    (property "Value" "3.32kohm +/- 1%" (at 0 1.43 0) (layer "F.Fab") (hide yes) (effects (font (size 1 1) (thickness 0.15))))
    (property "Footprint" "Resistor_SMD:R_0603_1608Metric")
    (property "Sheetpath" "coil_fixed")
    (attr smd)
    (fp_line (start -0.237258 -0.5225) (end 0.237258 -0.5225) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_line (start -0.237258 0.5225) (end 0.237258 0.5225) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_rect (start -1.48 -0.73) (end 1.48 0.73) (layer "F.CrtYd") (stroke (width 0.05) (type solid)) (fill no))
    (fp_rect (start -0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (stroke (width 0.1) (type solid)) (fill no))
    (fp_text user "${REFERENCE}" (at 0 0 0) (layer "F.Fab")
      (effects (font (size 0.4 0.4) (thickness 0.06)))
    )
    (pad "1" smd roundrect (at -0.825 0) (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25)
      (net 1 "+3V3"))
    (pad "2" smd roundrect (at 0.825 0) (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25)
      (net 4 "COIL_SENSE"))
    (model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.step"
      (offset (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (footprint "Resistor_SMD:R_0603_1608Metric" (version 20260206) (generator kicad-footprint-generator) (layer "F.Cu")
    (tedit 0f95e6ec) (tstamp 200f91d5-042f-d531-4fdf-6ca9ba0a41b0)
    (at 27.0 24.0 90.0)
    (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
    (tags "resistor")
    (property "Reference" "R6" (at 0 -1.43 0) (layer "F.Fab") (hide yes) (effects (font (size 1 1) (thickness 0.15))))
    (property "Value" "3.16kohm +/- 1%" (at 0 1.43 0) (layer "F.Fab") (hide yes) (effects (font (size 1 1) (thickness 0.15))))
    (property "Footprint" "Resistor_SMD:R_0603_1608Metric")
    (property "Sheetpath" "coil_top")
    (attr smd)
    (fp_line (start -0.237258 -0.5225) (end 0.237258 -0.5225) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_line (start -0.237258 0.5225) (end 0.237258 0.5225) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_rect (start -1.48 -0.73) (end 1.48 0.73) (layer "F.CrtYd") (stroke (width 0.05) (type solid)) (fill no))
    (fp_rect (start -0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (stroke (width 0.1) (type solid)) (fill no))
    (fp_text user "${REFERENCE}" (at 0 0 0) (layer "F.Fab")
      (effects (font (size 0.4 0.4) (thickness 0.06)))
    )
    (pad "1" smd roundrect (at -0.825 0) (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25)
      (net 1 "+3V3"))
    (pad "2" smd roundrect (at 0.825 0) (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25)
      (net 3 "COIL_REF"))
    (model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.step"
      (offset (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (footprint "Resistor_SMD:R_0603_1608Metric" (version 20260206) (generator kicad-footprint-generator) (layer "F.Cu")
    (tedit b8967616) (tstamp 4e816584-31f6-701e-b67d-8e6f8460e439)
    (at 23.0 31.0 90.0)
    (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
    (tags "resistor")
    (property "Reference" "R7" (at 0 -1.43 0) (layer "F.Fab") (hide yes) (effects (font (size 1 1) (thickness 0.15))))
    (property "Value" "4.42kohm +/- 1%" (at 0 1.43 0) (layer "F.Fab") (hide yes) (effects (font (size 1 1) (thickness 0.15))))
    (property "Footprint" "Resistor_SMD:R_0603_1608Metric")
    (property "Sheetpath" "coil_bottom")
    (attr smd)
    (fp_line (start -0.237258 -0.5225) (end 0.237258 -0.5225) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_line (start -0.237258 0.5225) (end 0.237258 0.5225) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_rect (start -1.48 -0.73) (end 1.48 0.73) (layer "F.CrtYd") (stroke (width 0.05) (type solid)) (fill no))
    (fp_rect (start -0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (stroke (width 0.1) (type solid)) (fill no))
    (fp_text user "${REFERENCE}" (at 0 0 0) (layer "F.Fab")
      (effects (font (size 0.4 0.4) (thickness 0.06)))
    )
    (pad "1" smd roundrect (at -0.825 0) (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25)
      (net 3 "COIL_REF"))
    (pad "2" smd roundrect (at 0.825 0) (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25)
      (net 8 "gnd"))
    (model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.step"
      (offset (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (footprint "Resistor_SMD:R_0603_1608Metric" (version 20260206) (generator kicad-footprint-generator) (layer "F.Cu")
    (tedit 0cd985db) (tstamp e7edcad6-aa30-61dd-7335-e85a9ff31a88)
    (at 32.0 24.0)
    (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
    (tags "resistor")
    (property "Reference" "R8" (at 0 -1.43 0) (layer "F.Fab") (hide yes) (effects (font (size 1 1) (thickness 0.15))))
    (property "Value" "11.5kohm +/- 1%" (at 0 1.43 0) (layer "F.Fab") (hide yes) (effects (font (size 1 1) (thickness 0.15))))
    (property "Footprint" "Resistor_SMD:R_0603_1608Metric")
    (property "Sheetpath" "coil_hyst")
    (attr smd)
    (fp_line (start -0.237258 -0.5225) (end 0.237258 -0.5225) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_line (start -0.237258 0.5225) (end 0.237258 0.5225) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_rect (start -1.48 -0.73) (end 1.48 0.73) (layer "F.CrtYd") (stroke (width 0.05) (type solid)) (fill no))
    (fp_rect (start -0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (stroke (width 0.1) (type solid)) (fill no))
    (fp_text user "${REFERENCE}" (at 0 0 0) (layer "F.Fab")
      (effects (font (size 0.4 0.4) (thickness 0.06)))
    )
    (pad "1" smd roundrect (at -0.825 0) (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25)
      (net 3 "COIL_REF"))
    (pad "2" smd roundrect (at 0.825 0) (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25)
      (net 2 "COIL_FAULT"))
    (model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.step"
      (offset (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (footprint "Package_TO_SOT_SMD:SOT-23-5" (version 20260206) (generator kicad-footprint-generator) (layer "F.Cu")
    (tedit b9a1ad66) (tstamp f5391692-09a8-7bea-9c2e-a4f60f914a72)
    (at 36.0 12.0)
    (descr "SOT, 5 Pin (JEDEC MO-178 Var AA https://www.jedec.org/document_search?search_api_views_fulltext=MO-178)")
    (tags "SOT TO_SOT_SMD")
    (property "Reference" "U1" (at 0 -1.43 0) (layer "F.Fab") (hide yes) (effects (font (size 1 1) (thickness 0.15))))
    (property "Value" "TLV3201AIDBVR" (at 0 1.43 0) (layer "F.Fab") (hide yes) (effects (font (size 1 1) (thickness 0.15))))
    (property "Footprint" "Package_TO_SOT_SMD:SOT-23-5")
    (property "Sheetpath" "hs_comp")
    (attr smd)
    (fp_line (start -0.91 -1.56) (end 0.91 -1.56) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_line (start -0.91 -1.51) (end -0.91 -1.56) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_line (start -0.91 1.56) (end -0.91 1.51) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_line (start 0.91 -1.56) (end 0.91 -1.51) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_line (start 0.91 -0.39) (end 0.91 0.39) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_line (start 0.91 1.51) (end 0.91 1.56) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_line (start 0.91 1.56) (end -0.91 1.56) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_poly (pts
        (xy -1.45 -1.51)
        (xy -1.69 -1.84)
        (xy -1.21 -1.84)
      ) (layer "F.SilkS") (stroke (width 0.12) (type solid)) (fill yes))
    (fp_line (start -2.05 -1.5) (end -1.05 -1.5) (layer "F.CrtYd") (stroke (width 0.05) (type solid)))
    (fp_line (start -2.05 1.5) (end -2.05 -1.5) (layer "F.CrtYd") (stroke (width 0.05) (type solid)))
    (fp_line (start -1.05 -1.7) (end 1.05 -1.7) (layer "F.CrtYd") (stroke (width 0.05) (type solid)))
    (fp_line (start -1.05 -1.5) (end -1.05 -1.7) (layer "F.CrtYd") (stroke (width 0.05) (type solid)))
    (fp_line (start -1.05 1.5) (end -2.05 1.5) (layer "F.CrtYd") (stroke (width 0.05) (type solid)))
    (fp_line (start -1.05 1.7) (end -1.05 1.5) (layer "F.CrtYd") (stroke (width 0.05) (type solid)))
    (fp_line (start 1.05 -1.7) (end 1.05 -1.5) (layer "F.CrtYd") (stroke (width 0.05) (type solid)))
    (fp_line (start 1.05 -1.5) (end 2.05 -1.5) (layer "F.CrtYd") (stroke (width 0.05) (type solid)))
    (fp_line (start 1.05 -0.39) (end 1.05 0.39) (layer "F.CrtYd") (stroke (width 0.05) (type solid)))
    (fp_line (start 1.05 0.39) (end 2.05 0.39) (layer "F.CrtYd") (stroke (width 0.05) (type solid)))
    (fp_line (start 1.05 1.5) (end 1.05 1.7) (layer "F.CrtYd") (stroke (width 0.05) (type solid)))
    (fp_line (start 1.05 1.7) (end -1.05 1.7) (layer "F.CrtYd") (stroke (width 0.05) (type solid)))
    (fp_line (start 2.05 -1.5) (end 2.05 -0.39) (layer "F.CrtYd") (stroke (width 0.05) (type solid)))
    (fp_line (start 2.05 -0.39) (end 1.05 -0.39) (layer "F.CrtYd") (stroke (width 0.05) (type solid)))
    (fp_line (start 2.05 0.39) (end 2.05 1.5) (layer "F.CrtYd") (stroke (width 0.05) (type solid)))
    (fp_line (start 2.05 1.5) (end 1.05 1.5) (layer "F.CrtYd") (stroke (width 0.05) (type solid)))
    (fp_poly (pts
        (xy -0.4 -1.45)
        (xy 0.8 -1.45)
        (xy 0.8 1.45)
        (xy -0.8 1.45)
        (xy -0.8 -1.05)
      ) (layer "F.Fab") (stroke (width 0.1) (type solid)) (fill no))
    (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab")
      (effects (font (size 0.72 0.72) (thickness 0.11)))
    )
    (pad "1" smd roundrect (at -1.1375 -0.95) (size 1.325 0.6) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25)
      (net 5 "HS_FAULT"))
    (pad "2" smd roundrect (at -1.1375 0) (size 1.325 0.6) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25)
      (net 8 "gnd"))
    (pad "3" smd roundrect (at -1.1375 0.95) (size 1.325 0.6) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25)
      (net 6 "HS_REF"))
    (pad "4" smd roundrect (at 1.1375 0.95) (size 1.325 0.6) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25)
      (net 7 "HS_SENSE"))
    (pad "5" smd roundrect (at 1.1375 -0.95) (size 1.325 0.6) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25)
      (net 1 "+3V3"))
    (model "${KICAD10_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23-5.step"
      (offset (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (footprint "Package_TO_SOT_SMD:SOT-23-5" (version 20260206) (generator kicad-footprint-generator) (layer "F.Cu")
    (tedit 1662f156) (tstamp 7e3a8798-21ff-1304-523d-8629312d09a1)
    (at 36.0 30.0)
    (descr "SOT, 5 Pin (JEDEC MO-178 Var AA https://www.jedec.org/document_search?search_api_views_fulltext=MO-178)")
    (tags "SOT TO_SOT_SMD")
    (property "Reference" "U2" (at 0 -1.43 0) (layer "F.Fab") (hide yes) (effects (font (size 1 1) (thickness 0.15))))
    (property "Value" "TLV3201AIDBVR" (at 0 1.43 0) (layer "F.Fab") (hide yes) (effects (font (size 1 1) (thickness 0.15))))
    (property "Footprint" "Package_TO_SOT_SMD:SOT-23-5")
    (property "Sheetpath" "coil_comp")
    (attr smd)
    (fp_line (start -0.91 -1.56) (end 0.91 -1.56) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_line (start -0.91 -1.51) (end -0.91 -1.56) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_line (start -0.91 1.56) (end -0.91 1.51) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_line (start 0.91 -1.56) (end 0.91 -1.51) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_line (start 0.91 -0.39) (end 0.91 0.39) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_line (start 0.91 1.51) (end 0.91 1.56) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_line (start 0.91 1.56) (end -0.91 1.56) (layer "F.SilkS") (stroke (width 0.12) (type solid)))
    (fp_poly (pts
        (xy -1.45 -1.51)
        (xy -1.69 -1.84)
        (xy -1.21 -1.84)
      ) (layer "F.SilkS") (stroke (width 0.12) (type solid)) (fill yes))
    (fp_line (start -2.05 -1.5) (end -1.05 -1.5) (layer "F.CrtYd") (stroke (width 0.05) (type solid)))
    (fp_line (start -2.05 1.5) (end -2.05 -1.5) (layer "F.CrtYd") (stroke (width 0.05) (type solid)))
    (fp_line (start -1.05 -1.7) (end 1.05 -1.7) (layer "F.CrtYd") (stroke (width 0.05) (type solid)))
    (fp_line (start -1.05 -1.5) (end -1.05 -1.7) (layer "F.CrtYd") (stroke (width 0.05) (type solid)))
    (fp_line (start -1.05 1.5) (end -2.05 1.5) (layer "F.CrtYd") (stroke (width 0.05) (type solid)))
    (fp_line (start -1.05 1.7) (end -1.05 1.5) (layer "F.CrtYd") (stroke (width 0.05) (type solid)))
    (fp_line (start 1.05 -1.7) (end 1.05 -1.5) (layer "F.CrtYd") (stroke (width 0.05) (type solid)))
    (fp_line (start 1.05 -1.5) (end 2.05 -1.5) (layer "F.CrtYd") (stroke (width 0.05) (type solid)))
    (fp_line (start 1.05 -0.39) (end 1.05 0.39) (layer "F.CrtYd") (stroke (width 0.05) (type solid)))
    (fp_line (start 1.05 0.39) (end 2.05 0.39) (layer "F.CrtYd") (stroke (width 0.05) (type solid)))
    (fp_line (start 1.05 1.5) (end 1.05 1.7) (layer "F.CrtYd") (stroke (width 0.05) (type solid)))
    (fp_line (start 1.05 1.7) (end -1.05 1.7) (layer "F.CrtYd") (stroke (width 0.05) (type solid)))
    (fp_line (start 2.05 -1.5) (end 2.05 -0.39) (layer "F.CrtYd") (stroke (width 0.05) (type solid)))
    (fp_line (start 2.05 -0.39) (end 1.05 -0.39) (layer "F.CrtYd") (stroke (width 0.05) (type solid)))
    (fp_line (start 2.05 0.39) (end 2.05 1.5) (layer "F.CrtYd") (stroke (width 0.05) (type solid)))
    (fp_line (start 2.05 1.5) (end 1.05 1.5) (layer "F.CrtYd") (stroke (width 0.05) (type solid)))
    (fp_poly (pts
        (xy -0.4 -1.45)
        (xy 0.8 -1.45)
        (xy 0.8 1.45)
        (xy -0.8 1.45)
        (xy -0.8 -1.05)
      ) (layer "F.Fab") (stroke (width 0.1) (type solid)) (fill no))
    (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab")
      (effects (font (size 0.72 0.72) (thickness 0.11)))
    )
    (pad "1" smd roundrect (at -1.1375 -0.95) (size 1.325 0.6) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25)
      (net 2 "COIL_FAULT"))
    (pad "2" smd roundrect (at -1.1375 0) (size 1.325 0.6) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25)
      (net 8 "gnd"))
    (pad "3" smd roundrect (at -1.1375 0.95) (size 1.325 0.6) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25)
      (net 3 "COIL_REF"))
    (pad "4" smd roundrect (at 1.1375 0.95) (size 1.325 0.6) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25)
      (net 4 "COIL_SENSE"))
    (pad "5" smd roundrect (at 1.1375 -0.95) (size 1.325 0.6) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25)
      (net 1 "+3V3"))
    (model "${KICAD10_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23-5.step"
      (offset (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (gr_poly
    (pts
      (xy 0.0 0.0)
      (xy 66.0 0.0)
      (xy 66.0 43.0)
      (xy 0.0 43.0)
    ) (layer "Edge.Cuts") (width 0.1))

)