# Changelog The changelog records significant changes to both the firmware and the bootloader. Since the bootloader has a separate release cycle its changes are recorded separately. ## Firmware ### Unreleased - API: include the installed stage0 version in the device info response - Allow entering the optional BIP39 passphrase on the host, with device approval and confirmation - Reject malformed microSD backups instead of crashing - Hold the screen reset pin low until firmware is ready initalize it. - Cardano: limit xpub requests to 20 keypaths per batch - API: add a session reset command for clean host reconnects after interrupted operations - Add German firmware translations ### v9.27.1 - API: include the installed bootloader version in the device info response - Ethereum: display the EIP-712 message type before signing - Bitcoin: allow signing messages with keys in the m/48' application namespace ### v9.27.0 - Display long transaction and swap amounts in full instead of truncating them - Bitcoin: allow signing messages with keys in the m/45' application namespace - Bitcoin: support timestamp-based absolute locktimes and remove the RBF status display ### v9.26.5 - Experimental support for BitBoxSync (disabled for now, feature-flag required) - Security improvements - Fixed a crash when listing many backups over Bluetooth - Fix unexpected NACK responses on iOS due to slow securechip operations ### v9.26.4 - Ethereum: allow ':' in EIP-712 type names, used by some dapps as a namespace separator ### v9.26.3 - Security improvements ### v9.26.2 - Intermediate release to update the bootloader to v1.2.2 ### v9.26.1 - Fix a payment request validation issue ### v9.26.0 - Improve experience of moving back and forth when entering password characters - Ethereum: add data streaming support for transactions and EIP-712 typed messages with large data - Ethereum: allow EIP-712 typed message signing without anti-klepto host nonce commitment - Improve address display by grouping addresses into groups of 4 characters - Add support for swaps in payment requests ### v9.25.0 - BitBox02 Nova: improved password stretching algorithm - Fix bug that BLE was turned off when iOS device is unlocked - simulator-graphical: a new simulator with a graphical user interface - Add ability to change the device password after initial setup - Show remaining unlock attempts before unlocking instead of after a failed attempt ### v9.24.0 - Change title when entering recovery words to `1 of 24`, `2 of 24`, etc. - Remove option to restore from 18 recovery words - simulator: enable Test Merchant for payment requests - simulator: simulate a Nova device - Add API call to fetch multiple xpubs at once - Add the option for the simulator to write its memory to file. - Bitcoin: add support for OP_RETURN outputs ### v9.23.3 - Bluetooth: fix communication timeout when creating/restoring a wallet ### 9.23.2 - Improve touch sensor reliability when the sdcard is inserted ### 9.23.1 - EVM: add HyperEVM (HYPE) and SONIC (S) to known networks - U2F: fix macos/safari macos/firefox support - Fix USB timeout bug ### 9.23.0 - Ethereum: add confirmation screen for known networks, change base unit to ETH for Arbitrum and Optimism - Ethereum: add Base and Gnosis Chain to known networks - Ethereum: allow fetching xpub at m/44'/60'/0' and m/44'/1'/0' - Bitcoin: enable message signing on testnet and regtest - Enable Litecoin in the simulator ### 9.22.0 - Update manufacturer HID descriptor to bitbox.swiss - Ethereum: remove deprecated Goerli network - SD card: solve backup bug when sd card is re-inserted - Cardano: allow serialization using 258-tagged sets - Bitcoin: identify outputs belonging to different accounts of the same keystore ### 9.21.0 - Bitcoin: add support for sending to silent payment (BIP-352) addresses - Bitcoin: add support for Taproot wallet policies and Miniscript on Taproot (MiniTapscript) - Bitcoin: add support for regtest - Cardano: add support for vote delegation ### 9.20.0 - Bitcoin: UX improvements for payment request confirmations - Ethereum: display the addresses on device in the same case as the user input - Allow exiting the screen asking to insert the microSD card - SD card: Remove API to prompt removal of the microSD card - SD card: add auto-detection of insertion ### 9.19.0 - Display device name on screen before unlock - Bitcoin: add support for payment requests - Bitcoin: allow multisig accounts at arbitrary keypaths - Bitcoin: allow spendung UTXOs at very high BIP-44 address indices - Ethereum: allow signing EIP-712 messages containing multi-line strings - Ethereum: display the addresses on device in the same case as the user input ### 9.18.0 - Add support for deriving BIP-39 mnemonics according to BIP-85 ### 9.17.1 - Intermediate release to rotate the root pubkeys in the bootloader ### 9.17.0 - Add support for deriving mnemonics for Lightning hot wallets according to BIP-85 (using a custom BIP-85 application number) ### 9.16.0 - Disable screensaver when displaying a receive address, confirming a transaction, and other interactive actions - Add Sepolia testnet for Ethereum - Added a disclaimer screen before the recovery words are displayed - Verifiable seed generation: when restoring from 12 or 18 recovery words, for the final word, restrict input to the valid candidate words which result in a valid checksum. For 24 words, this feature was already introduced in 9.4.0. - Bitcoin: don't warn about "unusual" sequence numbers in transactions anymore - Add EIP-1559 transaction support for Ethereum ### 9.15.0 - Security bugfix: check index of an input's previous output to prevent the fee attack originally reported by Saleem Rashid - Allow exporting the xpub at any keypath after user confirmation - Support for Miniscript wallet policies of the form `wsh()` - Updated BTC/LTC amount formatting to display the trailing zeroes - Bitcoin: allow marking non-change transaction outputs as internal - Allow ETH transactions with empty data + zero value ### 9.14.1 - Improved security: keep seed encrypted in RAM ### 9.14.0 - Improved touch button positional accuracy in noisy environments - Increased performance when signing Bitcoin transactions - Warn if the transaction fee is higher than 10% of the coins sent - ETH Testnets: add Goerli and remove deprecated Rinkeby and Ropsten ### 9.13.1 - Fix bug introduced in 9.13.0: remove double cancel confirmation in the 'Restore from recovery words' workflow ### 9.13.0 - Bitcoin: allow displaying BTC values in the 'sat' unit - Allow skipping the microSD card backup in favor of backing up using the recovery words - Allow arbitrary input sequence numbers (fixes compatibility with Taproot transactions in Sparrow wallet) - The BackupData.length field is now obsolete and always set to 0 - Port remaining protobuf code to Rust, remove the C nanopb protobuf dependency. - Ethereum: replace ERC20 token names with their unit codes in the receive screen - SetPassword now returns the UserAbort error instead of the Generic error if the user cancelled ### 9.12.0 - Ethereum: add support for EIP-712 structured data signing - UI: add a 1px padding for left/right-aligned text for better visibility ### 9.11.0 - Add SSD1312 driver for new OLED screens ### 9.10.0 [2022-03-10] - Bitcoin: add support for BIP-86: receive to taproot addresses and sign transactions with taproot inputs - Ethereum: add support for the Binance Smart Chain, Optimism, Polygon, Fantom Opera and Arbitrum One networks ### 9.9.1 [2022-02-07] - Cardano: support sending to legacy Byron addresses - Cardano: disallow duplicate token keys in an output ### 9.9.0 [released 2022-01-10] - Support sending to taproot addresses - ListBackups: ported to Rust - Confirm restore from microSD before setting a device password - Cardano: allow transactions with a zero TTL value - Cardano: add support for sending tokens - Protobuf: rename BTCSignOutputRequest.hash to BTCSignOutputRequest.payload - Ethereum: add 807 ERC-20 tokens - Ethereum: increase size limit for transaction data to accommodate Opensea transactions ### 9.8.0 [released 2021-10-21] - Multi edition: add Cardano support. - Allow recovery words that convert to a zero seed, such as the 12 words `abandon abandon .... about`. - RestoreBackup: ported to Rust. Will now return UserAbortError on user abort instead of GenericError. - Show "Transaction confirmed"/"Transaction canceled" messages when signing Ethereum transactions ### 9.7.0 [released 2021-09-06] - Allow mainnet keypaths (`m/44'/60'/0'/0/*`) Rinkeby and Ropsten, and testnet keypaths (`m/44'/1'/0'/0/*`) for Ethereum mainnet - Display granular error codes when unlock fails unexpectedly - Remove RandomNumber API endpoint ### 9.6.0 [released 2021-05-20] - Attempt to fix flaky SD behavior - Add securechip_model to DeviceInfo: ATECCC608A or ATECC608B. - Added reboot purpose for clearer UX: "Proceed to upgrade?" vs. "Go to startup settings?" - Allow creation of 128 bit seeds (12 BIP39 recovery words) - Increase maximum number of registered multisig accounts from 10 to 25. ### 9.5.0 [released 2021-03-10] - RestoreFromMnemonic: ported to Rust. Will now return UserAbortError on user abort instead of GenericError. - Anti-klepto support for ETH transaction signing and for BTC and ETH message signing. - Add Uniswap ERC-20 token. - Display warning before confirming raw ETH data. ### 9.4.0 [released 2021-01-20] - ETHPubRequest api call now fails if a an invalid contract address is provided also if `display` is false. - Fix a memory leak (freeing a malloc'd string - no a functional or security issue) - Title fixed when entering the 21st, 22nd and 23rd recovery word (was 21th, 22th, 23th) before. - Verifiable seed generation: when restoring from 24 recovery words, for the 24th word, show all 8 candidate words which result in a valid checksum. - Better error reporting on secure chip setup failures. - Fix a rare touch issue resulting from failed calibration. - Protection against the nonce covert channel attack when singing Bitcoin/Litecoin transactions (antiklepto protocol). ### 9.3.1 [tagged 2020-12-01] - Fix a bug where the device could freeze and become unresponsive. ### 9.3.0 [tagged 2020-11-23] - Enter multisig account name on the device if the name in BTCRegisterScriptConfigRequest is empty. - Allow new keypaths: m/48'/coin'/account' for multisig, to enable compatibility with the Nunchuk wallet. - Multisig script type and derivation keypath are now also verified during account regisration. ## Bootloader ### Unreleased ### v1.2.3 - Verify firmware with a versioned signature prehash. - Speed up the empty firmware check when entering bootloader mode. - Speed up firmware upgrades over USB. - Hold the screen reset pin low until bootloader is ready to initalize it. ### v1.2.2 - Fix stage1 firmware erase handling for partially erased flash blocks ### v1.2.1 - Bugfix to allow full-sized firmware upgrades ### v1.2.0 - Convert to stage1 - Security improvements ### v1.1.2 - BitBox02 Nova: correctly orient bootloader screen ### v1.1.1 - Fix touch in plus bootloader ### v1.1.0 - Update manufacturer HID descriptor to bitbox.swiss - Implement OP_HARDWARE endpoint, to identify the secure chip model - Add Bluetooth communication for Bluetooth-enabled targets ### v1.0.6 - Replace root pubkeys ### v1.0.5 - Add SSD1312 driver for new OLED screens ### v1.0.4 - Make bootloader mode more user-friendly and prompt for action on empty firmware ## Stage0 bootloader ### Unreleased ### v3 - Move the factory randomness backup out of the firmware area to preserve firmware integrity during stage1 updates. - Verify stage1 with a versioned signature prehash, allowing stage0 to be upgraded before the bundled stage1 is installed. ### v2 - Hold the screen reset pin low until bootloader is ready to initalize it.