(kicad_pcb (version 20171130) (host pcbnew 5.0.2+dfsg1-1) (general (thickness 1.6) (drawings 0) (tracks 138) (zones 0) (modules 94) (nets 69) ) (page A4) (layers (0 F.Cu signal) (1 In1.Cu signal) (2 In2.Cu signal) (31 B.Cu signal) (32 B.Adhes user) (33 F.Adhes user) (34 B.Paste user) (35 F.Paste user) (36 B.SilkS user) (37 F.SilkS user) (38 B.Mask user) (39 F.Mask user) (40 Dwgs.User user) (41 Cmts.User user) (42 Eco1.User user) (43 Eco2.User user) (44 Edge.Cuts user) (45 Margin user) (46 B.CrtYd user) (47 F.CrtYd user) (48 B.Fab user) (49 F.Fab user) ) (setup (last_trace_width 0.25) (trace_clearance 0.2) (zone_clearance 0.508) (zone_45_only no) (trace_min 0.2) (segment_width 0.2) (edge_width 0.15) (via_size 0.8) (via_drill 0.4) (via_min_size 0.4) (via_min_drill 0.3) (uvia_size 0.3) (uvia_drill 0.1) (uvias_allowed no) (uvia_min_size 0.2) (uvia_min_drill 0.1) (pcb_text_width 0.3) (pcb_text_size 1.5 1.5) (mod_edge_width 0.15) (mod_text_size 1 1) (mod_text_width 0.15) (pad_size 1.524 1.524) (pad_drill 0.762) (pad_to_mask_clearance 0.051) (solder_mask_min_width 0.25) (aux_axis_origin 0 0) (visible_elements FFFFFF7F) (pcbplotparams (layerselection 0x010fc_ffffffff) (usegerberextensions false) (usegerberattributes false) (usegerberadvancedattributes false) (creategerberjobfile false) (excludeedgelayer true) (linewidth 0.100000) (plotframeref false) (viasonmask false) (mode 1) (useauxorigin false) (hpglpennumber 1) (hpglpenspeed 20) (hpglpendiameter 15.000000) (psnegative false) (psa4output false) (plotreference true) (plotvalue true) (plotinvisibletext false) (padsonsilk false) (subtractmaskfromsilk false) (outputformat 1) (mirror false) (drillshape 1) (scaleselection 1) (outputdirectory "")) ) (net 0 "") (net 1 +12V) (net 2 GND) (net 3 TAC_3) (net 4 "Net-(C3-Pad1)") (net 5 TAC_1) (net 6 TAC_2) (net 7 DI_1) (net 8 DI_2) (net 9 ADC_RAW) (net 10 ADC_GENERIC) (net 11 ADC_PT1000) (net 12 "Net-(D1-Pad2)") (net 13 "Net-(D2-Pad1)") (net 14 "Net-(D2-Pad2)") (net 15 "Net-(D3-Pad2)") (net 16 "Net-(D3-Pad1)") (net 17 "Net-(D4-Pad2)") (net 18 "Net-(D6-Pad2)") (net 19 "Net-(D6-Pad1)") (net 20 "Net-(D7-Pad2)") (net 21 "Net-(D10-Pad2)") (net 22 "Net-(D10-Pad1)") (net 23 "Net-(D11-Pad1)") (net 24 "Net-(D11-Pad2)") (net 25 VIN) (net 26 "Net-(J7-Pad3)") (net 27 +5V) (net 28 V_USB) (net 29 "Net-(J11-Pad3)") (net 30 "Net-(J12-Pad3)") (net 31 DO_1) (net 32 DO_2) (net 33 DO_3) (net 34 DO_4) (net 35 DO_5) (net 36 "Net-(J18-Pad2)") (net 37 "Net-(J19-Pad2)") (net 38 I2C_SCL) (net 39 I2C_SDA) (net 40 +3V3) (net 41 UART_RX) (net 42 UART_TX) (net 43 "Net-(J22-Pad1)") (net 44 "Net-(J23-Pad1)") (net 45 "Net-(J24-Pad2)") (net 46 USB_DM) (net 47 USB_DP) (net 48 SPI_MISO) (net 49 SPI_CS) (net 50 SPI_SCK) (net 51 SPI_MOSI) (net 52 "Net-(Q1-Pad1)") (net 53 "Net-(Q2-Pad1)") (net 54 "Net-(Q3-Pad1)") (net 55 "Net-(Q4-Pad1)") (net 56 "Net-(Q5-Pad1)") (net 57 FET_1) (net 58 FET_2) (net 59 "Net-(R6-Pad1)") (net 60 FAN_3) (net 61 "Net-(D5-Pad2)") (net 62 FAN_1) (net 63 FAN_2) (net 64 "Net-(D8-Pad2)") (net 65 "Net-(D9-Pad2)") (net 66 "Net-(D12-Pad2)") (net 67 "Net-(D13-Pad2)") (net 68 "Net-(D14-Pad2)") (net_class Default "This is the default net class." (clearance 0.2) (trace_width 0.25) (via_dia 0.8) (via_drill 0.4) (uvia_dia 0.3) (uvia_drill 0.1) (add_net +12V) (add_net +3V3) (add_net +5V) (add_net ADC_GENERIC) (add_net ADC_PT1000) (add_net ADC_RAW) (add_net DI_1) (add_net DI_2) (add_net DO_1) (add_net DO_2) (add_net DO_3) (add_net DO_4) (add_net DO_5) (add_net FAN_1) (add_net FAN_2) (add_net FAN_3) (add_net FET_1) (add_net FET_2) (add_net GND) (add_net I2C_SCL) (add_net I2C_SDA) (add_net "Net-(C3-Pad1)") (add_net "Net-(D1-Pad2)") (add_net "Net-(D10-Pad1)") (add_net "Net-(D10-Pad2)") (add_net "Net-(D11-Pad1)") (add_net "Net-(D11-Pad2)") (add_net "Net-(D12-Pad2)") (add_net "Net-(D13-Pad2)") (add_net "Net-(D14-Pad2)") (add_net "Net-(D2-Pad1)") (add_net "Net-(D2-Pad2)") (add_net "Net-(D3-Pad1)") (add_net "Net-(D3-Pad2)") (add_net "Net-(D4-Pad2)") (add_net "Net-(D5-Pad2)") (add_net "Net-(D6-Pad1)") (add_net "Net-(D6-Pad2)") (add_net "Net-(D7-Pad2)") (add_net "Net-(D8-Pad2)") (add_net "Net-(D9-Pad2)") (add_net "Net-(J11-Pad3)") (add_net "Net-(J12-Pad3)") (add_net "Net-(J18-Pad2)") (add_net "Net-(J19-Pad2)") (add_net "Net-(J22-Pad1)") (add_net "Net-(J23-Pad1)") (add_net "Net-(J24-Pad2)") (add_net "Net-(J7-Pad3)") (add_net "Net-(Q1-Pad1)") (add_net "Net-(Q2-Pad1)") (add_net "Net-(Q3-Pad1)") (add_net "Net-(Q4-Pad1)") (add_net "Net-(Q5-Pad1)") (add_net "Net-(R6-Pad1)") (add_net SPI_CS) (add_net SPI_MISO) (add_net SPI_MOSI) (add_net SPI_SCK) (add_net TAC_1) (add_net TAC_2) (add_net TAC_3) (add_net UART_RX) (add_net UART_TX) (add_net USB_DM) (add_net USB_DP) (add_net VIN) (add_net V_USB) ) (module Capacitor_SMD:CP_Elec_10x10 (layer F.Cu) (tedit 5BCA39D1) (tstamp 6151774A) (at 169.1 131.064) (descr "SMD capacitor, aluminum electrolytic, Nichicon, 10.0x10.0mm") (tags "capacitor electrolytic") (path /614E7A92) (attr smd) (fp_text reference C1 (at 0 -6.2) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 100u (at 0 6.2) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -6.25 1.5) (end -5.4 1.5) (layer F.CrtYd) (width 0.05)) (fp_line (start -6.25 -1.5) (end -6.25 1.5) (layer F.CrtYd) (width 0.05)) (fp_line (start -5.4 -1.5) (end -6.25 -1.5) (layer F.CrtYd) (width 0.05)) (fp_line (start -5.4 1.5) (end -5.4 4.25) (layer F.CrtYd) (width 0.05)) (fp_line (start -5.4 -4.25) (end -5.4 -1.5) (layer F.CrtYd) (width 0.05)) (fp_line (start -5.4 -4.25) (end -4.25 -5.4) (layer F.CrtYd) (width 0.05)) (fp_line (start -5.4 4.25) (end -4.25 5.4) (layer F.CrtYd) (width 0.05)) (fp_line (start -4.25 -5.4) (end 5.4 -5.4) (layer F.CrtYd) (width 0.05)) (fp_line (start -4.25 5.4) (end 5.4 5.4) (layer F.CrtYd) (width 0.05)) (fp_line (start 5.4 1.5) (end 5.4 5.4) (layer F.CrtYd) (width 0.05)) (fp_line (start 6.25 1.5) (end 5.4 1.5) (layer F.CrtYd) (width 0.05)) (fp_line (start 6.25 -1.5) (end 6.25 1.5) (layer F.CrtYd) (width 0.05)) (fp_line (start 5.4 -1.5) (end 6.25 -1.5) (layer F.CrtYd) (width 0.05)) (fp_line (start 5.4 -5.4) (end 5.4 -1.5) (layer F.CrtYd) (width 0.05)) (fp_line (start -6.125 -3.385) (end -6.125 -2.135) (layer F.SilkS) (width 0.12)) (fp_line (start -6.75 -2.76) (end -5.5 -2.76) (layer F.SilkS) (width 0.12)) (fp_line (start -5.26 4.195563) (end -4.195563 5.26) (layer F.SilkS) (width 0.12)) (fp_line (start -5.26 -4.195563) (end -4.195563 -5.26) (layer F.SilkS) (width 0.12)) (fp_line (start -5.26 -4.195563) (end -5.26 -1.51) (layer F.SilkS) (width 0.12)) (fp_line (start -5.26 4.195563) (end -5.26 1.51) (layer F.SilkS) (width 0.12)) (fp_line (start -4.195563 5.26) (end 5.26 5.26) (layer F.SilkS) (width 0.12)) (fp_line (start -4.195563 -5.26) (end 5.26 -5.26) (layer F.SilkS) (width 0.12)) (fp_line (start 5.26 -5.26) (end 5.26 -1.51) (layer F.SilkS) (width 0.12)) (fp_line (start 5.26 5.26) (end 5.26 1.51) (layer F.SilkS) (width 0.12)) (fp_line (start -4.058325 -2.2) (end -4.058325 -1.2) (layer F.Fab) (width 0.1)) (fp_line (start -4.558325 -1.7) (end -3.558325 -1.7) (layer F.Fab) (width 0.1)) (fp_line (start -5.15 4.15) (end -4.15 5.15) (layer F.Fab) (width 0.1)) (fp_line (start -5.15 -4.15) (end -4.15 -5.15) (layer F.Fab) (width 0.1)) (fp_line (start -5.15 -4.15) (end -5.15 4.15) (layer F.Fab) (width 0.1)) (fp_line (start -4.15 5.15) (end 5.15 5.15) (layer F.Fab) (width 0.1)) (fp_line (start -4.15 -5.15) (end 5.15 -5.15) (layer F.Fab) (width 0.1)) (fp_line (start 5.15 -5.15) (end 5.15 5.15) (layer F.Fab) (width 0.1)) (fp_circle (center 0 0) (end 5 0) (layer F.Fab) (width 0.1)) (pad 2 smd roundrect (at 4 0) (size 4 2.5) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.1) (net 2 GND)) (pad 1 smd roundrect (at -4 0) (size 4 2.5) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.1) (net 1 +12V)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/CP_Elec_10x10.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 6151775B) (at 51.555001 135.848001) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags capacitor) (path /61659EB4) (attr smd) (fp_text reference C2 (at 0 -1.43) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 100n (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 3 TAC_3)) (pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 GND)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:CP_Elec_10x10 (layer F.Cu) (tedit 5BCA39D1) (tstamp 61517783) (at 132.588 119.444 270) (descr "SMD capacitor, aluminum electrolytic, Nichicon, 10.0x10.0mm") (tags "capacitor electrolytic") (path /614E7B36) (attr smd) (fp_text reference C3 (at 0 -6.2 270) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 330u (at 0 6.2 270) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_circle (center 0 0) (end 5 0) (layer F.Fab) (width 0.1)) (fp_line (start 5.15 -5.15) (end 5.15 5.15) (layer F.Fab) (width 0.1)) (fp_line (start -4.15 -5.15) (end 5.15 -5.15) (layer F.Fab) (width 0.1)) (fp_line (start -4.15 5.15) (end 5.15 5.15) (layer F.Fab) (width 0.1)) (fp_line (start -5.15 -4.15) (end -5.15 4.15) (layer F.Fab) (width 0.1)) (fp_line (start -5.15 -4.15) (end -4.15 -5.15) (layer F.Fab) (width 0.1)) (fp_line (start -5.15 4.15) (end -4.15 5.15) (layer F.Fab) (width 0.1)) (fp_line (start -4.558325 -1.7) (end -3.558325 -1.7) (layer F.Fab) (width 0.1)) (fp_line (start -4.058325 -2.2) (end -4.058325 -1.2) (layer F.Fab) (width 0.1)) (fp_line (start 5.26 5.26) (end 5.26 1.51) (layer F.SilkS) (width 0.12)) (fp_line (start 5.26 -5.26) (end 5.26 -1.51) (layer F.SilkS) (width 0.12)) (fp_line (start -4.195563 -5.26) (end 5.26 -5.26) (layer F.SilkS) (width 0.12)) (fp_line (start -4.195563 5.26) (end 5.26 5.26) (layer F.SilkS) (width 0.12)) (fp_line (start -5.26 4.195563) (end -5.26 1.51) (layer F.SilkS) (width 0.12)) (fp_line (start -5.26 -4.195563) (end -5.26 -1.51) (layer F.SilkS) (width 0.12)) (fp_line (start -5.26 -4.195563) (end -4.195563 -5.26) (layer F.SilkS) (width 0.12)) (fp_line (start -5.26 4.195563) (end -4.195563 5.26) (layer F.SilkS) (width 0.12)) (fp_line (start -6.75 -2.76) (end -5.5 -2.76) (layer F.SilkS) (width 0.12)) (fp_line (start -6.125 -3.385) (end -6.125 -2.135) (layer F.SilkS) (width 0.12)) (fp_line (start 5.4 -5.4) (end 5.4 -1.5) (layer F.CrtYd) (width 0.05)) (fp_line (start 5.4 -1.5) (end 6.25 -1.5) (layer F.CrtYd) (width 0.05)) (fp_line (start 6.25 -1.5) (end 6.25 1.5) (layer F.CrtYd) (width 0.05)) (fp_line (start 6.25 1.5) (end 5.4 1.5) (layer F.CrtYd) (width 0.05)) (fp_line (start 5.4 1.5) (end 5.4 5.4) (layer F.CrtYd) (width 0.05)) (fp_line (start -4.25 5.4) (end 5.4 5.4) (layer F.CrtYd) (width 0.05)) (fp_line (start -4.25 -5.4) (end 5.4 -5.4) (layer F.CrtYd) (width 0.05)) (fp_line (start -5.4 4.25) (end -4.25 5.4) (layer F.CrtYd) (width 0.05)) (fp_line (start -5.4 -4.25) (end -4.25 -5.4) (layer F.CrtYd) (width 0.05)) (fp_line (start -5.4 -4.25) (end -5.4 -1.5) (layer F.CrtYd) (width 0.05)) (fp_line (start -5.4 1.5) (end -5.4 4.25) (layer F.CrtYd) (width 0.05)) (fp_line (start -5.4 -1.5) (end -6.25 -1.5) (layer F.CrtYd) (width 0.05)) (fp_line (start -6.25 -1.5) (end -6.25 1.5) (layer F.CrtYd) (width 0.05)) (fp_line (start -6.25 1.5) (end -5.4 1.5) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0 270) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 1 smd roundrect (at -4 0 270) (size 4 2.5) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.1) (net 4 "Net-(C3-Pad1)")) (pad 2 smd roundrect (at 4 0 270) (size 4 2.5) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.1) (net 2 GND)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/CP_Elec_10x10.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 61517794) (at 48.545001 135.848001) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags capacitor) (path /61648DBF) (attr smd) (fp_text reference C4 (at 0 -1.43) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 100n (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 5 TAC_1)) (pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 GND)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 615177A5) (at 44.655001 138.498001) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags capacitor) (path /61653608) (attr smd) (fp_text reference C5 (at 0 -1.43) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 100n (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 GND)) (pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 6 TAC_2)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 615177B6) (at 59.145001 124.998001) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags capacitor) (path /6151C7BB) (attr smd) (fp_text reference C6 (at 0 -1.43) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 100n (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 GND)) (pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 7 DI_1)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 615177C7) (at 41.645001 138.498001) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags capacitor) (path /6151F965) (attr smd) (fp_text reference C7 (at 0 -1.43) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 100n (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 8 DI_2)) (pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 GND)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 615177D8) (at 192.532 127.7875 270) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags capacitor) (path /61597B61) (attr smd) (fp_text reference C8 (at 0 -1.43 270) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 100n (at 0 1.43 270) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0 270) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (pad 2 smd roundrect (at 0.7875 0 270) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 GND)) (pad 1 smd roundrect (at -0.7875 0 270) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 9 ADC_RAW)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 615177E9) (at 178.0795 127) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags capacitor) (path /614ECB1C) (attr smd) (fp_text reference C9 (at 0 -1.43) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 100n (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 GND)) (pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 10 ADC_GENERIC)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 615177FA) (at 186.436 126.2125 90) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags capacitor) (path /614F0525) (attr smd) (fp_text reference C10 (at 0 -1.43 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 100n (at 0 1.43 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 1 smd roundrect (at -0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 11 ADC_PT1000)) (pad 2 smd roundrect (at 0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 GND)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module LED_SMD:LED_0805_2012Metric (layer F.Cu) (tedit 5B36C52C) (tstamp 6151780D) (at 129.1105 125.984) (descr "LED SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags diode) (path /614E9D30) (attr smd) (fp_text reference D1 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value VIN_LED (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1 -0.6) (end -0.7 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.7 -0.6) (end -1 -0.3) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.3) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.96) (end -1.685 -0.96) (layer F.SilkS) (width 0.12)) (fp_line (start -1.685 -0.96) (end -1.685 0.96) (layer F.SilkS) (width 0.12)) (fp_line (start -1.685 0.96) (end 1 0.96) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 GND)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 12 "Net-(D1-Pad2)")) (model ${KISYS3DMOD}/LED_SMD.3dshapes/LED_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Diode_SMD:D_SOD-523 (layer F.Cu) (tedit 586419F0) (tstamp 61517825) (at 95.445001 99.738001) (descr "http://www.diodes.com/datasheets/ap02001.pdf p.144") (tags "Diode SOD523") (path /6166395A) (attr smd) (fp_text reference D2 (at 0 -1.3) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 1N914 (at 0 1.4) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 0.7 0.6) (end -1.15 0.6) (layer F.SilkS) (width 0.12)) (fp_line (start 0.7 -0.6) (end -1.15 -0.6) (layer F.SilkS) (width 0.12)) (fp_line (start 0.65 0.45) (end -0.65 0.45) (layer F.Fab) (width 0.1)) (fp_line (start -0.65 0.45) (end -0.65 -0.45) (layer F.Fab) (width 0.1)) (fp_line (start -0.65 -0.45) (end 0.65 -0.45) (layer F.Fab) (width 0.1)) (fp_line (start 0.65 -0.45) (end 0.65 0.45) (layer F.Fab) (width 0.1)) (fp_line (start -0.2 0.2) (end -0.2 -0.2) (layer F.Fab) (width 0.1)) (fp_line (start -0.2 0) (end -0.35 0) (layer F.Fab) (width 0.1)) (fp_line (start -0.2 0) (end 0.1 0.2) (layer F.Fab) (width 0.1)) (fp_line (start 0.1 0.2) (end 0.1 -0.2) (layer F.Fab) (width 0.1)) (fp_line (start 0.1 -0.2) (end -0.2 0) (layer F.Fab) (width 0.1)) (fp_line (start 0.1 0) (end 0.25 0) (layer F.Fab) (width 0.1)) (fp_line (start 1.25 0.7) (end -1.25 0.7) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.25 0.7) (end -1.25 -0.7) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.25 -0.7) (end 1.25 -0.7) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.25 -0.7) (end 1.25 0.7) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.15 -0.6) (end -1.15 0.6) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 0 -1.3) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 1 smd rect (at -0.7 0 180) (size 0.6 0.7) (layers F.Cu F.Paste F.Mask) (net 13 "Net-(D2-Pad1)")) (pad 2 smd rect (at 0.7 0 180) (size 0.6 0.7) (layers F.Cu F.Paste F.Mask) (net 14 "Net-(D2-Pad2)")) (model ${KISYS3DMOD}/Diode_SMD.3dshapes/D_SOD-523.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Diode_SMD:D_SOD-523 (layer F.Cu) (tedit 586419F0) (tstamp 6151783D) (at 59.015001 139.288001) (descr "http://www.diodes.com/datasheets/ap02001.pdf p.144") (tags "Diode SOD523") (path /616A197D) (attr smd) (fp_text reference D3 (at 0 -1.3) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 1N914 (at 0 1.4) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 0.7 0.6) (end -1.15 0.6) (layer F.SilkS) (width 0.12)) (fp_line (start 0.7 -0.6) (end -1.15 -0.6) (layer F.SilkS) (width 0.12)) (fp_line (start 0.65 0.45) (end -0.65 0.45) (layer F.Fab) (width 0.1)) (fp_line (start -0.65 0.45) (end -0.65 -0.45) (layer F.Fab) (width 0.1)) (fp_line (start -0.65 -0.45) (end 0.65 -0.45) (layer F.Fab) (width 0.1)) (fp_line (start 0.65 -0.45) (end 0.65 0.45) (layer F.Fab) (width 0.1)) (fp_line (start -0.2 0.2) (end -0.2 -0.2) (layer F.Fab) (width 0.1)) (fp_line (start -0.2 0) (end -0.35 0) (layer F.Fab) (width 0.1)) (fp_line (start -0.2 0) (end 0.1 0.2) (layer F.Fab) (width 0.1)) (fp_line (start 0.1 0.2) (end 0.1 -0.2) (layer F.Fab) (width 0.1)) (fp_line (start 0.1 -0.2) (end -0.2 0) (layer F.Fab) (width 0.1)) (fp_line (start 0.1 0) (end 0.25 0) (layer F.Fab) (width 0.1)) (fp_line (start 1.25 0.7) (end -1.25 0.7) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.25 0.7) (end -1.25 -0.7) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.25 -0.7) (end 1.25 -0.7) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.25 -0.7) (end 1.25 0.7) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.15 -0.6) (end -1.15 0.6) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 0 -1.3) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 1 smd rect (at -0.7 0 180) (size 0.6 0.7) (layers F.Cu F.Paste F.Mask) (net 16 "Net-(D3-Pad1)")) (pad 2 smd rect (at 0.7 0 180) (size 0.6 0.7) (layers F.Cu F.Paste F.Mask) (net 15 "Net-(D3-Pad2)")) (model ${KISYS3DMOD}/Diode_SMD.3dshapes/D_SOD-523.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module LED_SMD:LED_0805_2012Metric (layer F.Cu) (tedit 5B36C52C) (tstamp 61517850) (at 152.4785 114.808) (descr "LED SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags diode) (path /614E775A) (attr smd) (fp_text reference D4 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 12V_LED (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1 -0.6) (end -0.7 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.7 -0.6) (end -1 -0.3) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.3) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.96) (end -1.685 -0.96) (layer F.SilkS) (width 0.12)) (fp_line (start -1.685 -0.96) (end -1.685 0.96) (layer F.SilkS) (width 0.12)) (fp_line (start -1.685 0.96) (end 1 0.96) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 GND)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 17 "Net-(D4-Pad2)")) (model ${KISYS3DMOD}/LED_SMD.3dshapes/LED_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Package_TO_SOT_SMD:SOT-323_SC-70 (layer F.Cu) (tedit 5A02FF57) (tstamp 61517865) (at 34.965001 138.268001) (descr "SOT-323, SC-70") (tags "SOT-323 SC-70") (path /61659E84) (attr smd) (fp_text reference D5 (at -0.05 -1.95) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value BAV99 (at -0.05 2.05) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.075))) ) (fp_line (start 0.73 0.5) (end 0.73 1.16) (layer F.SilkS) (width 0.12)) (fp_line (start 0.73 -1.16) (end 0.73 -0.5) (layer F.SilkS) (width 0.12)) (fp_line (start 1.7 1.3) (end -1.7 1.3) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.7 -1.3) (end 1.7 1.3) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.7 -1.3) (end 1.7 -1.3) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.7 1.3) (end -1.7 -1.3) (layer F.CrtYd) (width 0.05)) (fp_line (start 0.73 -1.16) (end -1.3 -1.16) (layer F.SilkS) (width 0.12)) (fp_line (start -0.68 1.16) (end 0.73 1.16) (layer F.SilkS) (width 0.12)) (fp_line (start 0.67 -1.1) (end -0.18 -1.1) (layer F.Fab) (width 0.1)) (fp_line (start -0.68 -0.6) (end -0.68 1.1) (layer F.Fab) (width 0.1)) (fp_line (start 0.67 -1.1) (end 0.67 1.1) (layer F.Fab) (width 0.1)) (fp_line (start 0.67 1.1) (end -0.68 1.1) (layer F.Fab) (width 0.1)) (fp_line (start -0.18 -1.1) (end -0.68 -0.6) (layer F.Fab) (width 0.1)) (pad 1 smd rect (at -1 -0.65 270) (size 0.45 0.7) (layers F.Cu F.Paste F.Mask) (net 2 GND)) (pad 2 smd rect (at -1 0.65 270) (size 0.45 0.7) (layers F.Cu F.Paste F.Mask) (net 61 "Net-(D5-Pad2)")) (pad 3 smd rect (at 1 0 270) (size 0.45 0.7) (layers F.Cu F.Paste F.Mask) (net 40 +3V3)) (model ${KISYS3DMOD}/Package_TO_SOT_SMD.3dshapes/SOT-323_SC-70.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Diode_SMD:D_SOD-523 (layer F.Cu) (tedit 586419F0) (tstamp 6151787D) (at 69.385001 137.138001) (descr "http://www.diodes.com/datasheets/ap02001.pdf p.144") (tags "Diode SOD523") (path /61659E5F) (attr smd) (fp_text reference D6 (at 0 -1.3) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 1N914 (at 0 1.4) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 -1.3) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -1.15 -0.6) (end -1.15 0.6) (layer F.SilkS) (width 0.12)) (fp_line (start 1.25 -0.7) (end 1.25 0.7) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.25 -0.7) (end 1.25 -0.7) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.25 0.7) (end -1.25 -0.7) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.25 0.7) (end -1.25 0.7) (layer F.CrtYd) (width 0.05)) (fp_line (start 0.1 0) (end 0.25 0) (layer F.Fab) (width 0.1)) (fp_line (start 0.1 -0.2) (end -0.2 0) (layer F.Fab) (width 0.1)) (fp_line (start 0.1 0.2) (end 0.1 -0.2) (layer F.Fab) (width 0.1)) (fp_line (start -0.2 0) (end 0.1 0.2) (layer F.Fab) (width 0.1)) (fp_line (start -0.2 0) (end -0.35 0) (layer F.Fab) (width 0.1)) (fp_line (start -0.2 0.2) (end -0.2 -0.2) (layer F.Fab) (width 0.1)) (fp_line (start 0.65 -0.45) (end 0.65 0.45) (layer F.Fab) (width 0.1)) (fp_line (start -0.65 -0.45) (end 0.65 -0.45) (layer F.Fab) (width 0.1)) (fp_line (start -0.65 0.45) (end -0.65 -0.45) (layer F.Fab) (width 0.1)) (fp_line (start 0.65 0.45) (end -0.65 0.45) (layer F.Fab) (width 0.1)) (fp_line (start 0.7 -0.6) (end -1.15 -0.6) (layer F.SilkS) (width 0.12)) (fp_line (start 0.7 0.6) (end -1.15 0.6) (layer F.SilkS) (width 0.12)) (pad 2 smd rect (at 0.7 0 180) (size 0.6 0.7) (layers F.Cu F.Paste F.Mask) (net 18 "Net-(D6-Pad2)")) (pad 1 smd rect (at -0.7 0 180) (size 0.6 0.7) (layers F.Cu F.Paste F.Mask) (net 19 "Net-(D6-Pad1)")) (model ${KISYS3DMOD}/Diode_SMD.3dshapes/D_SOD-523.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module LED_SMD:LED_0805_2012Metric (layer F.Cu) (tedit 5B36C52C) (tstamp 61517890) (at 140.2865 114.808) (descr "LED SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags diode) (path /614E7834) (attr smd) (fp_text reference D7 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 5V_LED (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.685 0.96) (end 1 0.96) (layer F.SilkS) (width 0.12)) (fp_line (start -1.685 -0.96) (end -1.685 0.96) (layer F.SilkS) (width 0.12)) (fp_line (start 1 -0.96) (end -1.685 -0.96) (layer F.SilkS) (width 0.12)) (fp_line (start 1 0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.3) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.7 -0.6) (end -1 -0.3) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end -0.7 -0.6) (layer F.Fab) (width 0.1)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 20 "Net-(D7-Pad2)")) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 GND)) (model ${KISYS3DMOD}/LED_SMD.3dshapes/LED_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Package_TO_SOT_SMD:SOT-323_SC-70 (layer F.Cu) (tedit 5A02FF57) (tstamp 615178A5) (at 34.965001 135.618001) (descr "SOT-323, SC-70") (tags "SOT-323 SC-70") (path /6162CA96) (attr smd) (fp_text reference D8 (at -0.05 -1.95) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value BAV99 (at -0.05 2.05) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -0.18 -1.1) (end -0.68 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 0.67 1.1) (end -0.68 1.1) (layer F.Fab) (width 0.1)) (fp_line (start 0.67 -1.1) (end 0.67 1.1) (layer F.Fab) (width 0.1)) (fp_line (start -0.68 -0.6) (end -0.68 1.1) (layer F.Fab) (width 0.1)) (fp_line (start 0.67 -1.1) (end -0.18 -1.1) (layer F.Fab) (width 0.1)) (fp_line (start -0.68 1.16) (end 0.73 1.16) (layer F.SilkS) (width 0.12)) (fp_line (start 0.73 -1.16) (end -1.3 -1.16) (layer F.SilkS) (width 0.12)) (fp_line (start -1.7 1.3) (end -1.7 -1.3) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.7 -1.3) (end 1.7 -1.3) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.7 -1.3) (end 1.7 1.3) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.7 1.3) (end -1.7 1.3) (layer F.CrtYd) (width 0.05)) (fp_line (start 0.73 -1.16) (end 0.73 -0.5) (layer F.SilkS) (width 0.12)) (fp_line (start 0.73 0.5) (end 0.73 1.16) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.075))) ) (pad 3 smd rect (at 1 0 270) (size 0.45 0.7) (layers F.Cu F.Paste F.Mask) (net 40 +3V3)) (pad 2 smd rect (at -1 0.65 270) (size 0.45 0.7) (layers F.Cu F.Paste F.Mask) (net 64 "Net-(D8-Pad2)")) (pad 1 smd rect (at -1 -0.65 270) (size 0.45 0.7) (layers F.Cu F.Paste F.Mask) (net 2 GND)) (model ${KISYS3DMOD}/Package_TO_SOT_SMD.3dshapes/SOT-323_SC-70.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Package_TO_SOT_SMD:SOT-323_SC-70 (layer F.Cu) (tedit 5A02FF57) (tstamp 615178BA) (at 38.415001 135.618001) (descr "SOT-323, SC-70") (tags "SOT-323 SC-70") (path /616535D8) (attr smd) (fp_text reference D9 (at -0.05 -1.95) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value BAV99 (at -0.05 2.05) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -0.18 -1.1) (end -0.68 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 0.67 1.1) (end -0.68 1.1) (layer F.Fab) (width 0.1)) (fp_line (start 0.67 -1.1) (end 0.67 1.1) (layer F.Fab) (width 0.1)) (fp_line (start -0.68 -0.6) (end -0.68 1.1) (layer F.Fab) (width 0.1)) (fp_line (start 0.67 -1.1) (end -0.18 -1.1) (layer F.Fab) (width 0.1)) (fp_line (start -0.68 1.16) (end 0.73 1.16) (layer F.SilkS) (width 0.12)) (fp_line (start 0.73 -1.16) (end -1.3 -1.16) (layer F.SilkS) (width 0.12)) (fp_line (start -1.7 1.3) (end -1.7 -1.3) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.7 -1.3) (end 1.7 -1.3) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.7 -1.3) (end 1.7 1.3) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.7 1.3) (end -1.7 1.3) (layer F.CrtYd) (width 0.05)) (fp_line (start 0.73 -1.16) (end 0.73 -0.5) (layer F.SilkS) (width 0.12)) (fp_line (start 0.73 0.5) (end 0.73 1.16) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.075))) ) (pad 3 smd rect (at 1 0 270) (size 0.45 0.7) (layers F.Cu F.Paste F.Mask) (net 40 +3V3)) (pad 2 smd rect (at -1 0.65 270) (size 0.45 0.7) (layers F.Cu F.Paste F.Mask) (net 65 "Net-(D9-Pad2)")) (pad 1 smd rect (at -1 -0.65 270) (size 0.45 0.7) (layers F.Cu F.Paste F.Mask) (net 2 GND)) (model ${KISYS3DMOD}/Package_TO_SOT_SMD.3dshapes/SOT-323_SC-70.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Diode_SMD:D_SOD-523 (layer F.Cu) (tedit 586419F0) (tstamp 615178D2) (at 56.465001 139.288001) (descr "http://www.diodes.com/datasheets/ap02001.pdf p.144") (tags "Diode SOD523") (path /615FECFA) (attr smd) (fp_text reference D10 (at 0 -1.3) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 1N914 (at 0 1.4) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 -1.3) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -1.15 -0.6) (end -1.15 0.6) (layer F.SilkS) (width 0.12)) (fp_line (start 1.25 -0.7) (end 1.25 0.7) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.25 -0.7) (end 1.25 -0.7) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.25 0.7) (end -1.25 -0.7) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.25 0.7) (end -1.25 0.7) (layer F.CrtYd) (width 0.05)) (fp_line (start 0.1 0) (end 0.25 0) (layer F.Fab) (width 0.1)) (fp_line (start 0.1 -0.2) (end -0.2 0) (layer F.Fab) (width 0.1)) (fp_line (start 0.1 0.2) (end 0.1 -0.2) (layer F.Fab) (width 0.1)) (fp_line (start -0.2 0) (end 0.1 0.2) (layer F.Fab) (width 0.1)) (fp_line (start -0.2 0) (end -0.35 0) (layer F.Fab) (width 0.1)) (fp_line (start -0.2 0.2) (end -0.2 -0.2) (layer F.Fab) (width 0.1)) (fp_line (start 0.65 -0.45) (end 0.65 0.45) (layer F.Fab) (width 0.1)) (fp_line (start -0.65 -0.45) (end 0.65 -0.45) (layer F.Fab) (width 0.1)) (fp_line (start -0.65 0.45) (end -0.65 -0.45) (layer F.Fab) (width 0.1)) (fp_line (start 0.65 0.45) (end -0.65 0.45) (layer F.Fab) (width 0.1)) (fp_line (start 0.7 -0.6) (end -1.15 -0.6) (layer F.SilkS) (width 0.12)) (fp_line (start 0.7 0.6) (end -1.15 0.6) (layer F.SilkS) (width 0.12)) (pad 2 smd rect (at 0.7 0 180) (size 0.6 0.7) (layers F.Cu F.Paste F.Mask) (net 21 "Net-(D10-Pad2)")) (pad 1 smd rect (at -0.7 0 180) (size 0.6 0.7) (layers F.Cu F.Paste F.Mask) (net 22 "Net-(D10-Pad1)")) (model ${KISYS3DMOD}/Diode_SMD.3dshapes/D_SOD-523.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Diode_SMD:D_SOD-523 (layer F.Cu) (tedit 586419F0) (tstamp 615178EA) (at 105.685001 100.488001) (descr "http://www.diodes.com/datasheets/ap02001.pdf p.144") (tags "Diode SOD523") (path /616535B3) (attr smd) (fp_text reference D11 (at 0 -1.3) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 1N914 (at 0 1.4) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 -1.3) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -1.15 -0.6) (end -1.15 0.6) (layer F.SilkS) (width 0.12)) (fp_line (start 1.25 -0.7) (end 1.25 0.7) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.25 -0.7) (end 1.25 -0.7) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.25 0.7) (end -1.25 -0.7) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.25 0.7) (end -1.25 0.7) (layer F.CrtYd) (width 0.05)) (fp_line (start 0.1 0) (end 0.25 0) (layer F.Fab) (width 0.1)) (fp_line (start 0.1 -0.2) (end -0.2 0) (layer F.Fab) (width 0.1)) (fp_line (start 0.1 0.2) (end 0.1 -0.2) (layer F.Fab) (width 0.1)) (fp_line (start -0.2 0) (end 0.1 0.2) (layer F.Fab) (width 0.1)) (fp_line (start -0.2 0) (end -0.35 0) (layer F.Fab) (width 0.1)) (fp_line (start -0.2 0.2) (end -0.2 -0.2) (layer F.Fab) (width 0.1)) (fp_line (start 0.65 -0.45) (end 0.65 0.45) (layer F.Fab) (width 0.1)) (fp_line (start -0.65 -0.45) (end 0.65 -0.45) (layer F.Fab) (width 0.1)) (fp_line (start -0.65 0.45) (end -0.65 -0.45) (layer F.Fab) (width 0.1)) (fp_line (start 0.65 0.45) (end -0.65 0.45) (layer F.Fab) (width 0.1)) (fp_line (start 0.7 -0.6) (end -1.15 -0.6) (layer F.SilkS) (width 0.12)) (fp_line (start 0.7 0.6) (end -1.15 0.6) (layer F.SilkS) (width 0.12)) (pad 2 smd rect (at 0.7 0 180) (size 0.6 0.7) (layers F.Cu F.Paste F.Mask) (net 24 "Net-(D11-Pad2)")) (pad 1 smd rect (at -0.7 0 180) (size 0.6 0.7) (layers F.Cu F.Paste F.Mask) (net 23 "Net-(D11-Pad1)")) (model ${KISYS3DMOD}/Diode_SMD.3dshapes/D_SOD-523.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Package_TO_SOT_SMD:SOT-323_SC-70 (layer F.Cu) (tedit 5A02FF57) (tstamp 615178FF) (at 197.612 128.016 90) (descr "SOT-323, SC-70") (tags "SOT-323 SC-70") (path /6154F2CA) (attr smd) (fp_text reference D12 (at -0.05 -1.95 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value BAV99 (at -0.05 2.05 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0 180) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.075))) ) (fp_line (start 0.73 0.5) (end 0.73 1.16) (layer F.SilkS) (width 0.12)) (fp_line (start 0.73 -1.16) (end 0.73 -0.5) (layer F.SilkS) (width 0.12)) (fp_line (start 1.7 1.3) (end -1.7 1.3) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.7 -1.3) (end 1.7 1.3) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.7 -1.3) (end 1.7 -1.3) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.7 1.3) (end -1.7 -1.3) (layer F.CrtYd) (width 0.05)) (fp_line (start 0.73 -1.16) (end -1.3 -1.16) (layer F.SilkS) (width 0.12)) (fp_line (start -0.68 1.16) (end 0.73 1.16) (layer F.SilkS) (width 0.12)) (fp_line (start 0.67 -1.1) (end -0.18 -1.1) (layer F.Fab) (width 0.1)) (fp_line (start -0.68 -0.6) (end -0.68 1.1) (layer F.Fab) (width 0.1)) (fp_line (start 0.67 -1.1) (end 0.67 1.1) (layer F.Fab) (width 0.1)) (fp_line (start 0.67 1.1) (end -0.68 1.1) (layer F.Fab) (width 0.1)) (fp_line (start -0.18 -1.1) (end -0.68 -0.6) (layer F.Fab) (width 0.1)) (pad 1 smd rect (at -1 -0.65) (size 0.45 0.7) (layers F.Cu F.Paste F.Mask) (net 2 GND)) (pad 2 smd rect (at -1 0.65) (size 0.45 0.7) (layers F.Cu F.Paste F.Mask) (net 66 "Net-(D12-Pad2)")) (pad 3 smd rect (at 1 0) (size 0.45 0.7) (layers F.Cu F.Paste F.Mask) (net 40 +3V3)) (model ${KISYS3DMOD}/Package_TO_SOT_SMD.3dshapes/SOT-323_SC-70.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Package_TO_SOT_SMD:SOT-323_SC-70 (layer F.Cu) (tedit 5A02FF57) (tstamp 61517914) (at 180.99 128.032 90) (descr "SOT-323, SC-70") (tags "SOT-323 SC-70") (path /61524238) (attr smd) (fp_text reference D13 (at -0.05 -1.95 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value BAV99 (at -0.05 2.05 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -0.18 -1.1) (end -0.68 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 0.67 1.1) (end -0.68 1.1) (layer F.Fab) (width 0.1)) (fp_line (start 0.67 -1.1) (end 0.67 1.1) (layer F.Fab) (width 0.1)) (fp_line (start -0.68 -0.6) (end -0.68 1.1) (layer F.Fab) (width 0.1)) (fp_line (start 0.67 -1.1) (end -0.18 -1.1) (layer F.Fab) (width 0.1)) (fp_line (start -0.68 1.16) (end 0.73 1.16) (layer F.SilkS) (width 0.12)) (fp_line (start 0.73 -1.16) (end -1.3 -1.16) (layer F.SilkS) (width 0.12)) (fp_line (start -1.7 1.3) (end -1.7 -1.3) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.7 -1.3) (end 1.7 -1.3) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.7 -1.3) (end 1.7 1.3) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.7 1.3) (end -1.7 1.3) (layer F.CrtYd) (width 0.05)) (fp_line (start 0.73 -1.16) (end 0.73 -0.5) (layer F.SilkS) (width 0.12)) (fp_line (start 0.73 0.5) (end 0.73 1.16) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 0 0 180) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.075))) ) (pad 3 smd rect (at 1 0) (size 0.45 0.7) (layers F.Cu F.Paste F.Mask) (net 40 +3V3)) (pad 2 smd rect (at -1 0.65) (size 0.45 0.7) (layers F.Cu F.Paste F.Mask) (net 67 "Net-(D13-Pad2)")) (pad 1 smd rect (at -1 -0.65) (size 0.45 0.7) (layers F.Cu F.Paste F.Mask) (net 2 GND)) (model ${KISYS3DMOD}/Package_TO_SOT_SMD.3dshapes/SOT-323_SC-70.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Package_TO_SOT_SMD:SOT-323_SC-70 (layer F.Cu) (tedit 5A02FF57) (tstamp 61517929) (at 190.134 127.524 90) (descr "SOT-323, SC-70") (tags "SOT-323 SC-70") (path /615602E3) (attr smd) (fp_text reference D14 (at -0.05 -1.95 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value BAV99 (at -0.05 2.05 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0 180) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.075))) ) (fp_line (start 0.73 0.5) (end 0.73 1.16) (layer F.SilkS) (width 0.12)) (fp_line (start 0.73 -1.16) (end 0.73 -0.5) (layer F.SilkS) (width 0.12)) (fp_line (start 1.7 1.3) (end -1.7 1.3) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.7 -1.3) (end 1.7 1.3) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.7 -1.3) (end 1.7 -1.3) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.7 1.3) (end -1.7 -1.3) (layer F.CrtYd) (width 0.05)) (fp_line (start 0.73 -1.16) (end -1.3 -1.16) (layer F.SilkS) (width 0.12)) (fp_line (start -0.68 1.16) (end 0.73 1.16) (layer F.SilkS) (width 0.12)) (fp_line (start 0.67 -1.1) (end -0.18 -1.1) (layer F.Fab) (width 0.1)) (fp_line (start -0.68 -0.6) (end -0.68 1.1) (layer F.Fab) (width 0.1)) (fp_line (start 0.67 -1.1) (end 0.67 1.1) (layer F.Fab) (width 0.1)) (fp_line (start 0.67 1.1) (end -0.68 1.1) (layer F.Fab) (width 0.1)) (fp_line (start -0.18 -1.1) (end -0.68 -0.6) (layer F.Fab) (width 0.1)) (pad 1 smd rect (at -1 -0.65) (size 0.45 0.7) (layers F.Cu F.Paste F.Mask) (net 2 GND)) (pad 2 smd rect (at -1 0.65) (size 0.45 0.7) (layers F.Cu F.Paste F.Mask) (net 68 "Net-(D14-Pad2)")) (pad 3 smd rect (at 1 0) (size 0.45 0.7) (layers F.Cu F.Paste F.Mask) (net 40 +3V3)) (model ${KISYS3DMOD}/Package_TO_SOT_SMD.3dshapes/SOT-323_SC-70.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal (layer F.Cu) (tedit 5B294F69) (tstamp 61517953) (at 135.048 132.588 180) (descr "Terminal Block Phoenix PT-1,5-2-5.0-H, 2 pins, pitch 5mm, size 10x9mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix") (tags "THT Terminal Block Phoenix PT-1,5-2-5.0-H pitch 5mm size 10x9mm^2 drill 1.3mm pad 2.6mm") (path /614E8634) (fp_text reference J1 (at 2.5 -5.06 180) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value Conn_01x02_Female (at 2.5 6.06 180) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_circle (center 0 0) (end 2 0) (layer F.Fab) (width 0.1)) (fp_circle (center 0 0) (end 2.18 0) (layer F.SilkS) (width 0.12)) (fp_circle (center 5 0) (end 7 0) (layer F.Fab) (width 0.1)) (fp_circle (center 5 0) (end 7.18 0) (layer F.SilkS) (width 0.12)) (fp_line (start -2.5 -4) (end 7.5 -4) (layer F.Fab) (width 0.1)) (fp_line (start 7.5 -4) (end 7.5 5) (layer F.Fab) (width 0.1)) (fp_line (start 7.5 5) (end -2.1 5) (layer F.Fab) (width 0.1)) (fp_line (start -2.1 5) (end -2.5 4.6) (layer F.Fab) (width 0.1)) (fp_line (start -2.5 4.6) (end -2.5 -4) (layer F.Fab) (width 0.1)) (fp_line (start -2.5 4.6) (end 7.5 4.6) (layer F.Fab) (width 0.1)) (fp_line (start -2.56 4.6) (end 7.56 4.6) (layer F.SilkS) (width 0.12)) (fp_line (start -2.5 3.5) (end 7.5 3.5) (layer F.Fab) (width 0.1)) (fp_line (start -2.56 3.5) (end 7.56 3.5) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 -4.06) (end 7.56 -4.06) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 5.06) (end 7.56 5.06) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 -4.06) (end -2.56 5.06) (layer F.SilkS) (width 0.12)) (fp_line (start 7.56 -4.06) (end 7.56 5.06) (layer F.SilkS) (width 0.12)) (fp_line (start 1.517 -1.273) (end -1.273 1.517) (layer F.Fab) (width 0.1)) (fp_line (start 1.273 -1.517) (end -1.517 1.273) (layer F.Fab) (width 0.1)) (fp_line (start 1.654 -1.388) (end 1.547 -1.281) (layer F.SilkS) (width 0.12)) (fp_line (start -1.282 1.547) (end -1.388 1.654) (layer F.SilkS) (width 0.12)) (fp_line (start 1.388 -1.654) (end 1.281 -1.547) (layer F.SilkS) (width 0.12)) (fp_line (start -1.548 1.281) (end -1.654 1.388) (layer F.SilkS) (width 0.12)) (fp_line (start 6.517 -1.273) (end 3.728 1.517) (layer F.Fab) (width 0.1)) (fp_line (start 6.273 -1.517) (end 3.484 1.273) (layer F.Fab) (width 0.1)) (fp_line (start 6.654 -1.388) (end 6.259 -0.992) (layer F.SilkS) (width 0.12)) (fp_line (start 3.993 1.274) (end 3.613 1.654) (layer F.SilkS) (width 0.12)) (fp_line (start 6.388 -1.654) (end 6.008 -1.274) (layer F.SilkS) (width 0.12)) (fp_line (start 3.742 0.992) (end 3.347 1.388) (layer F.SilkS) (width 0.12)) (fp_line (start -2.8 4.66) (end -2.8 5.3) (layer F.SilkS) (width 0.12)) (fp_line (start -2.8 5.3) (end -2.4 5.3) (layer F.SilkS) (width 0.12)) (fp_line (start -3 -4.5) (end -3 5.5) (layer F.CrtYd) (width 0.05)) (fp_line (start -3 5.5) (end 8 5.5) (layer F.CrtYd) (width 0.05)) (fp_line (start 8 5.5) (end 8 -4.5) (layer F.CrtYd) (width 0.05)) (fp_line (start 8 -4.5) (end -3 -4.5) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 2.5 2.9 180) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 1 thru_hole rect (at 0 0 180) (size 2.6 2.6) (drill 1.3) (layers *.Cu *.Mask) (net 25 VIN)) (pad 2 thru_hole circle (at 5 0 180) (size 2.6 2.6) (drill 1.3) (layers *.Cu *.Mask) (net 2 GND)) (model ${KISYS3DMOD}/TerminalBlock_Phoenix.3dshapes/TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical (layer F.Cu) (tedit 59FED5CC) (tstamp 6151796A) (at 83.495001 111.688001) (descr "Through hole straight pin header, 1x03, 2.54mm pitch, single row") (tags "Through hole pin header THT 1x03 2.54mm single row") (path /61663933) (fp_text reference J2 (at 0 -2.33) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value FET_1_V_SELECT (at 0 7.41) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 2.54 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.8 -1.8) (end -1.8 -1.8) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.8 6.85) (end 1.8 -1.8) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.8 6.85) (end 1.8 6.85) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.8 -1.8) (end -1.8 6.85) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.33 -1.33) (end 0 -1.33) (layer F.SilkS) (width 0.12)) (fp_line (start -1.33 0) (end -1.33 -1.33) (layer F.SilkS) (width 0.12)) (fp_line (start -1.33 1.27) (end 1.33 1.27) (layer F.SilkS) (width 0.12)) (fp_line (start 1.33 1.27) (end 1.33 6.41) (layer F.SilkS) (width 0.12)) (fp_line (start -1.33 1.27) (end -1.33 6.41) (layer F.SilkS) (width 0.12)) (fp_line (start -1.33 6.41) (end 1.33 6.41) (layer F.SilkS) (width 0.12)) (fp_line (start -1.27 -0.635) (end -0.635 -1.27) (layer F.Fab) (width 0.1)) (fp_line (start -1.27 6.35) (end -1.27 -0.635) (layer F.Fab) (width 0.1)) (fp_line (start 1.27 6.35) (end -1.27 6.35) (layer F.Fab) (width 0.1)) (fp_line (start 1.27 -1.27) (end 1.27 6.35) (layer F.Fab) (width 0.1)) (fp_line (start -0.635 -1.27) (end 1.27 -1.27) (layer F.Fab) (width 0.1)) (pad 3 thru_hole oval (at 0 5.08) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 1 +12V)) (pad 2 thru_hole oval (at 0 2.54) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 13 "Net-(D2-Pad1)")) (pad 1 thru_hole rect (at 0 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 25 VIN)) (model ${KISYS3DMOD}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x03_P2.54mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical (layer F.Cu) (tedit 59FED5CC) (tstamp 61517981) (at 92.345001 100.838001) (descr "Through hole straight pin header, 1x03, 2.54mm pitch, single row") (tags "Through hole pin header THT 1x03 2.54mm single row") (path /616A1956) (fp_text reference J3 (at 0 -2.33) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value FET_2_V_SELECT (at 0 7.41) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -0.635 -1.27) (end 1.27 -1.27) (layer F.Fab) (width 0.1)) (fp_line (start 1.27 -1.27) (end 1.27 6.35) (layer F.Fab) (width 0.1)) (fp_line (start 1.27 6.35) (end -1.27 6.35) (layer F.Fab) (width 0.1)) (fp_line (start -1.27 6.35) (end -1.27 -0.635) (layer F.Fab) (width 0.1)) (fp_line (start -1.27 -0.635) (end -0.635 -1.27) (layer F.Fab) (width 0.1)) (fp_line (start -1.33 6.41) (end 1.33 6.41) (layer F.SilkS) (width 0.12)) (fp_line (start -1.33 1.27) (end -1.33 6.41) (layer F.SilkS) (width 0.12)) (fp_line (start 1.33 1.27) (end 1.33 6.41) (layer F.SilkS) (width 0.12)) (fp_line (start -1.33 1.27) (end 1.33 1.27) (layer F.SilkS) (width 0.12)) (fp_line (start -1.33 0) (end -1.33 -1.33) (layer F.SilkS) (width 0.12)) (fp_line (start -1.33 -1.33) (end 0 -1.33) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 -1.8) (end -1.8 6.85) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.8 6.85) (end 1.8 6.85) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.8 6.85) (end 1.8 -1.8) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.8 -1.8) (end -1.8 -1.8) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 2.54 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 1 thru_hole rect (at 0 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 25 VIN)) (pad 2 thru_hole oval (at 0 2.54) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 16 "Net-(D3-Pad1)")) (pad 3 thru_hole oval (at 0 5.08) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 1 +12V)) (model ${KISYS3DMOD}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x03_P2.54mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_JST:JST_XH_B02B-XH-A_1x02_P2.50mm_Vertical (layer F.Cu) (tedit 5B7754C5) (tstamp 615179AA) (at 80.415001 121.438001) (descr "JST XH series connector, B02B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator") (tags "connector JST XH side entry") (path /6167F713) (fp_text reference J4 (at 1.25 -3.55) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value FET_1 (at 1.25 4.6) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -2.45 -2.35) (end -2.45 3.4) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 3.4) (end 4.95 3.4) (layer F.Fab) (width 0.1)) (fp_line (start 4.95 3.4) (end 4.95 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start 4.95 -2.35) (end -2.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -2.56 -2.46) (end -2.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 3.51) (end 5.06 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start 5.06 3.51) (end 5.06 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start 5.06 -2.46) (end -2.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start -2.95 -2.85) (end -2.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 3.9) (end 5.45 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start 5.45 3.9) (end 5.45 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start 5.45 -2.85) (end -2.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.625 -2.35) (end 0 -1.35) (layer F.Fab) (width 0.1)) (fp_line (start 0 -1.35) (end 0.625 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start 0.75 -2.45) (end 0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -1.7) (end 1.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 1.75 -1.7) (end 1.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 1.75 -2.45) (end 0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -2.45) (end -2.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -1.7) (end -0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -1.7) (end -0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -2.45) (end -2.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 3.25 -2.45) (end 3.25 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 3.25 -1.7) (end 5.05 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 5.05 -1.7) (end 5.05 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 5.05 -2.45) (end 3.25 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -0.2) (end -1.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 -0.2) (end -1.8 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 2.75) (end 1.25 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 5.05 -0.2) (end 4.3 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 4.3 -0.2) (end 4.3 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 4.3 2.75) (end 1.25 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -1.6 -2.75) (end -2.85 -2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -2.85 -2.75) (end -2.85 -1.5) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 1.25 2.7) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 1 thru_hole roundrect (at 0 0) (size 1.7 2) (drill 1) (layers *.Cu *.Mask) (roundrect_rratio 0.147059) (net 13 "Net-(D2-Pad1)")) (pad 2 thru_hole oval (at 2.5 0) (size 1.7 2) (drill 1) (layers *.Cu *.Mask) (net 14 "Net-(D2-Pad2)")) (model ${KISYS3DMOD}/Connector_JST.3dshapes/JST_XH_B02B-XH-A_1x02_P2.50mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_JST:JST_XH_B02B-XH-A_1x02_P2.50mm_Vertical (layer F.Cu) (tedit 5B7754C5) (tstamp 615179D3) (at 93.495001 110.588001) (descr "JST XH series connector, B02B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator") (tags "connector JST XH side entry") (path /616A1999) (fp_text reference J5 (at 1.25 -3.55) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value FET_2 (at 1.25 4.6) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 1.25 2.7) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -2.85 -2.75) (end -2.85 -1.5) (layer F.SilkS) (width 0.12)) (fp_line (start -1.6 -2.75) (end -2.85 -2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 4.3 2.75) (end 1.25 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 4.3 -0.2) (end 4.3 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 5.05 -0.2) (end 4.3 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 2.75) (end 1.25 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 -0.2) (end -1.8 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -0.2) (end -1.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 5.05 -2.45) (end 3.25 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 5.05 -1.7) (end 5.05 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 3.25 -1.7) (end 5.05 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 3.25 -2.45) (end 3.25 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -2.45) (end -2.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -1.7) (end -0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -1.7) (end -0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -2.45) (end -2.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 1.75 -2.45) (end 0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 1.75 -1.7) (end 1.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -1.7) (end 1.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -2.45) (end 0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0 -1.35) (end 0.625 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -0.625 -2.35) (end 0 -1.35) (layer F.Fab) (width 0.1)) (fp_line (start 5.45 -2.85) (end -2.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start 5.45 3.9) (end 5.45 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 3.9) (end 5.45 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 -2.85) (end -2.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start 5.06 -2.46) (end -2.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start 5.06 3.51) (end 5.06 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 3.51) (end 5.06 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 -2.46) (end -2.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start 4.95 -2.35) (end -2.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start 4.95 3.4) (end 4.95 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 3.4) (end 4.95 3.4) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 -2.35) (end -2.45 3.4) (layer F.Fab) (width 0.1)) (pad 2 thru_hole oval (at 2.5 0) (size 1.7 2) (drill 1) (layers *.Cu *.Mask) (net 15 "Net-(D3-Pad2)")) (pad 1 thru_hole roundrect (at 0 0) (size 1.7 2) (drill 1) (layers *.Cu *.Mask) (roundrect_rratio 0.147059) (net 16 "Net-(D3-Pad1)")) (model ${KISYS3DMOD}/Connector_JST.3dshapes/JST_XH_B02B-XH-A_1x02_P2.50mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical (layer F.Cu) (tedit 59FED5CC) (tstamp 615179EA) (at 65.915001 126.068001) (descr "Through hole straight pin header, 1x03, 2.54mm pitch, single row") (tags "Through hole pin header THT 1x03 2.54mm single row") (path /61659E38) (fp_text reference J6 (at 0 -2.33) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value FAN_3_V_SELECT (at 0 7.41) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -0.635 -1.27) (end 1.27 -1.27) (layer F.Fab) (width 0.1)) (fp_line (start 1.27 -1.27) (end 1.27 6.35) (layer F.Fab) (width 0.1)) (fp_line (start 1.27 6.35) (end -1.27 6.35) (layer F.Fab) (width 0.1)) (fp_line (start -1.27 6.35) (end -1.27 -0.635) (layer F.Fab) (width 0.1)) (fp_line (start -1.27 -0.635) (end -0.635 -1.27) (layer F.Fab) (width 0.1)) (fp_line (start -1.33 6.41) (end 1.33 6.41) (layer F.SilkS) (width 0.12)) (fp_line (start -1.33 1.27) (end -1.33 6.41) (layer F.SilkS) (width 0.12)) (fp_line (start 1.33 1.27) (end 1.33 6.41) (layer F.SilkS) (width 0.12)) (fp_line (start -1.33 1.27) (end 1.33 1.27) (layer F.SilkS) (width 0.12)) (fp_line (start -1.33 0) (end -1.33 -1.33) (layer F.SilkS) (width 0.12)) (fp_line (start -1.33 -1.33) (end 0 -1.33) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 -1.8) (end -1.8 6.85) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.8 6.85) (end 1.8 6.85) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.8 6.85) (end 1.8 -1.8) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.8 -1.8) (end -1.8 -1.8) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 2.54 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 1 thru_hole rect (at 0 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 25 VIN)) (pad 2 thru_hole oval (at 0 2.54) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 19 "Net-(D6-Pad1)")) (pad 3 thru_hole oval (at 0 5.08) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 1 +12V)) (model ${KISYS3DMOD}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x03_P2.54mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_JST:JST_XH_B03B-XH-A_1x03_P2.50mm_Vertical (layer F.Cu) (tedit 5B7754C5) (tstamp 61517A14) (at 58.928 112.776) (descr "JST XH series connector, B03B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator") (tags "connector JST XH side entry") (path /61659E7A) (fp_text reference J7 (at 2.5 -3.55) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value FAN_3 (at 2.5 4.6) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 2.5 2.7) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -2.85 -2.75) (end -2.85 -1.5) (layer F.SilkS) (width 0.12)) (fp_line (start -1.6 -2.75) (end -2.85 -2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 6.8 2.75) (end 2.5 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 6.8 -0.2) (end 6.8 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -0.2) (end 6.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 2.75) (end 2.5 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 -0.2) (end -1.8 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -0.2) (end -1.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -2.45) (end 5.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -1.7) (end 7.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 5.75 -1.7) (end 7.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 5.75 -2.45) (end 5.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -2.45) (end -2.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -1.7) (end -0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -1.7) (end -0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -2.45) (end -2.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 4.25 -2.45) (end 0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 4.25 -1.7) (end 4.25 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -1.7) (end 4.25 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -2.45) (end 0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0 -1.35) (end 0.625 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -0.625 -2.35) (end 0 -1.35) (layer F.Fab) (width 0.1)) (fp_line (start 7.95 -2.85) (end -2.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start 7.95 3.9) (end 7.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 3.9) (end 7.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 -2.85) (end -2.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start 7.56 -2.46) (end -2.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start 7.56 3.51) (end 7.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 3.51) (end 7.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 -2.46) (end -2.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start 7.45 -2.35) (end -2.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start 7.45 3.4) (end 7.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 3.4) (end 7.45 3.4) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 -2.35) (end -2.45 3.4) (layer F.Fab) (width 0.1)) (pad 3 thru_hole oval (at 5 0) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (net 26 "Net-(J7-Pad3)")) (pad 2 thru_hole oval (at 2.5 0) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (net 18 "Net-(D6-Pad2)")) (pad 1 thru_hole roundrect (at 0 0) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (roundrect_rratio 0.147059) (net 19 "Net-(D6-Pad1)")) (model ${KISYS3DMOD}/Connector_JST.3dshapes/JST_XH_B03B-XH-A_1x03_P2.50mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical (layer F.Cu) (tedit 59FED5CC) (tstamp 61517A2B) (at 142.24 111.252 180) (descr "Through hole straight pin header, 1x03, 2.54mm pitch, single row") (tags "Through hole pin header THT 1x03 2.54mm single row") (path /615B72AA) (fp_text reference J8 (at 0 -2.33 180) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value VB_SELECT (at 0 7.41 180) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -0.635 -1.27) (end 1.27 -1.27) (layer F.Fab) (width 0.1)) (fp_line (start 1.27 -1.27) (end 1.27 6.35) (layer F.Fab) (width 0.1)) (fp_line (start 1.27 6.35) (end -1.27 6.35) (layer F.Fab) (width 0.1)) (fp_line (start -1.27 6.35) (end -1.27 -0.635) (layer F.Fab) (width 0.1)) (fp_line (start -1.27 -0.635) (end -0.635 -1.27) (layer F.Fab) (width 0.1)) (fp_line (start -1.33 6.41) (end 1.33 6.41) (layer F.SilkS) (width 0.12)) (fp_line (start -1.33 1.27) (end -1.33 6.41) (layer F.SilkS) (width 0.12)) (fp_line (start 1.33 1.27) (end 1.33 6.41) (layer F.SilkS) (width 0.12)) (fp_line (start -1.33 1.27) (end 1.33 1.27) (layer F.SilkS) (width 0.12)) (fp_line (start -1.33 0) (end -1.33 -1.33) (layer F.SilkS) (width 0.12)) (fp_line (start -1.33 -1.33) (end 0 -1.33) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 -1.8) (end -1.8 6.85) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.8 6.85) (end 1.8 6.85) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.8 6.85) (end 1.8 -1.8) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.8 -1.8) (end -1.8 -1.8) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 2.54 270) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 1 thru_hole rect (at 0 0 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 4 "Net-(C3-Pad1)")) (pad 2 thru_hole oval (at 0 2.54 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 27 +5V)) (pad 3 thru_hole oval (at 0 5.08 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 28 V_USB)) (model ${KISYS3DMOD}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x03_P2.54mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical (layer F.Cu) (tedit 59FED5CC) (tstamp 61517A42) (at 98.935001 94.038001) (descr "Through hole straight pin header, 1x03, 2.54mm pitch, single row") (tags "Through hole pin header THT 1x03 2.54mm single row") (path /615F0193) (fp_text reference J9 (at 0 -2.33) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value FAN_1_V_SELECT (at 0 7.41) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 2.54 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.8 -1.8) (end -1.8 -1.8) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.8 6.85) (end 1.8 -1.8) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.8 6.85) (end 1.8 6.85) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.8 -1.8) (end -1.8 6.85) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.33 -1.33) (end 0 -1.33) (layer F.SilkS) (width 0.12)) (fp_line (start -1.33 0) (end -1.33 -1.33) (layer F.SilkS) (width 0.12)) (fp_line (start -1.33 1.27) (end 1.33 1.27) (layer F.SilkS) (width 0.12)) (fp_line (start 1.33 1.27) (end 1.33 6.41) (layer F.SilkS) (width 0.12)) (fp_line (start -1.33 1.27) (end -1.33 6.41) (layer F.SilkS) (width 0.12)) (fp_line (start -1.33 6.41) (end 1.33 6.41) (layer F.SilkS) (width 0.12)) (fp_line (start -1.27 -0.635) (end -0.635 -1.27) (layer F.Fab) (width 0.1)) (fp_line (start -1.27 6.35) (end -1.27 -0.635) (layer F.Fab) (width 0.1)) (fp_line (start 1.27 6.35) (end -1.27 6.35) (layer F.Fab) (width 0.1)) (fp_line (start 1.27 -1.27) (end 1.27 6.35) (layer F.Fab) (width 0.1)) (fp_line (start -0.635 -1.27) (end 1.27 -1.27) (layer F.Fab) (width 0.1)) (pad 3 thru_hole oval (at 0 5.08) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 1 +12V)) (pad 2 thru_hole oval (at 0 2.54) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 22 "Net-(D10-Pad1)")) (pad 1 thru_hole rect (at 0 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 25 VIN)) (model ${KISYS3DMOD}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x03_P2.54mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical (layer F.Cu) (tedit 59FED5CC) (tstamp 61517A59) (at 69.565001 126.518001) (descr "Through hole straight pin header, 1x03, 2.54mm pitch, single row") (tags "Through hole pin header THT 1x03 2.54mm single row") (path /6165358C) (fp_text reference J10 (at 0 -2.33) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value FAN_2_V_SELECT (at 0 7.41) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 2.54 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.8 -1.8) (end -1.8 -1.8) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.8 6.85) (end 1.8 -1.8) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.8 6.85) (end 1.8 6.85) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.8 -1.8) (end -1.8 6.85) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.33 -1.33) (end 0 -1.33) (layer F.SilkS) (width 0.12)) (fp_line (start -1.33 0) (end -1.33 -1.33) (layer F.SilkS) (width 0.12)) (fp_line (start -1.33 1.27) (end 1.33 1.27) (layer F.SilkS) (width 0.12)) (fp_line (start 1.33 1.27) (end 1.33 6.41) (layer F.SilkS) (width 0.12)) (fp_line (start -1.33 1.27) (end -1.33 6.41) (layer F.SilkS) (width 0.12)) (fp_line (start -1.33 6.41) (end 1.33 6.41) (layer F.SilkS) (width 0.12)) (fp_line (start -1.27 -0.635) (end -0.635 -1.27) (layer F.Fab) (width 0.1)) (fp_line (start -1.27 6.35) (end -1.27 -0.635) (layer F.Fab) (width 0.1)) (fp_line (start 1.27 6.35) (end -1.27 6.35) (layer F.Fab) (width 0.1)) (fp_line (start 1.27 -1.27) (end 1.27 6.35) (layer F.Fab) (width 0.1)) (fp_line (start -0.635 -1.27) (end 1.27 -1.27) (layer F.Fab) (width 0.1)) (pad 3 thru_hole oval (at 0 5.08) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 1 +12V)) (pad 2 thru_hole oval (at 0 2.54) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 23 "Net-(D11-Pad1)")) (pad 1 thru_hole rect (at 0 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 25 VIN)) (model ${KISYS3DMOD}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x03_P2.54mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_JST:JST_XH_B03B-XH-A_1x03_P2.50mm_Vertical (layer F.Cu) (tedit 5B7754C5) (tstamp 61517A83) (at 73.695001 106.718001) (descr "JST XH series connector, B03B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator") (tags "connector JST XH side entry") (path /616231AD) (fp_text reference J11 (at 2.5 -3.55) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value FAN_1 (at 2.5 4.6) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 2.5 2.7) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -2.85 -2.75) (end -2.85 -1.5) (layer F.SilkS) (width 0.12)) (fp_line (start -1.6 -2.75) (end -2.85 -2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 6.8 2.75) (end 2.5 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 6.8 -0.2) (end 6.8 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -0.2) (end 6.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 2.75) (end 2.5 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 -0.2) (end -1.8 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -0.2) (end -1.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -2.45) (end 5.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -1.7) (end 7.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 5.75 -1.7) (end 7.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 5.75 -2.45) (end 5.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -2.45) (end -2.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -1.7) (end -0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -1.7) (end -0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -2.45) (end -2.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 4.25 -2.45) (end 0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 4.25 -1.7) (end 4.25 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -1.7) (end 4.25 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -2.45) (end 0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0 -1.35) (end 0.625 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -0.625 -2.35) (end 0 -1.35) (layer F.Fab) (width 0.1)) (fp_line (start 7.95 -2.85) (end -2.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start 7.95 3.9) (end 7.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 3.9) (end 7.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 -2.85) (end -2.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start 7.56 -2.46) (end -2.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start 7.56 3.51) (end 7.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 3.51) (end 7.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 -2.46) (end -2.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start 7.45 -2.35) (end -2.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start 7.45 3.4) (end 7.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 3.4) (end 7.45 3.4) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 -2.35) (end -2.45 3.4) (layer F.Fab) (width 0.1)) (pad 3 thru_hole oval (at 5 0) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (net 29 "Net-(J11-Pad3)")) (pad 2 thru_hole oval (at 2.5 0) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (net 21 "Net-(D10-Pad2)")) (pad 1 thru_hole roundrect (at 0 0) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (roundrect_rratio 0.147059) (net 22 "Net-(D10-Pad1)")) (model ${KISYS3DMOD}/Connector_JST.3dshapes/JST_XH_B03B-XH-A_1x03_P2.50mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_JST:JST_XH_B03B-XH-A_1x03_P2.50mm_Vertical (layer F.Cu) (tedit 5B7754C5) (tstamp 61517AAD) (at 91.235001 87.838001) (descr "JST XH series connector, B03B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator") (tags "connector JST XH side entry") (path /616535CE) (fp_text reference J12 (at 2.5 -3.55) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value FAN_2 (at 2.5 4.6) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -2.45 -2.35) (end -2.45 3.4) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 3.4) (end 7.45 3.4) (layer F.Fab) (width 0.1)) (fp_line (start 7.45 3.4) (end 7.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start 7.45 -2.35) (end -2.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -2.56 -2.46) (end -2.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 3.51) (end 7.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start 7.56 3.51) (end 7.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start 7.56 -2.46) (end -2.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start -2.95 -2.85) (end -2.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 3.9) (end 7.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start 7.95 3.9) (end 7.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start 7.95 -2.85) (end -2.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.625 -2.35) (end 0 -1.35) (layer F.Fab) (width 0.1)) (fp_line (start 0 -1.35) (end 0.625 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start 0.75 -2.45) (end 0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -1.7) (end 4.25 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 4.25 -1.7) (end 4.25 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 4.25 -2.45) (end 0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -2.45) (end -2.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -1.7) (end -0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -1.7) (end -0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -2.45) (end -2.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 5.75 -2.45) (end 5.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 5.75 -1.7) (end 7.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -1.7) (end 7.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -2.45) (end 5.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -0.2) (end -1.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 -0.2) (end -1.8 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 2.75) (end 2.5 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -0.2) (end 6.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 6.8 -0.2) (end 6.8 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 6.8 2.75) (end 2.5 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -1.6 -2.75) (end -2.85 -2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -2.85 -2.75) (end -2.85 -1.5) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 2.5 2.7) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 1 thru_hole roundrect (at 0 0) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (roundrect_rratio 0.147059) (net 23 "Net-(D11-Pad1)")) (pad 2 thru_hole oval (at 2.5 0) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (net 24 "Net-(D11-Pad2)")) (pad 3 thru_hole oval (at 5 0) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (net 30 "Net-(J12-Pad3)")) (model ${KISYS3DMOD}/Connector_JST.3dshapes/JST_XH_B03B-XH-A_1x03_P2.50mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_JST:JST_XH_B03B-XH-A_1x03_P2.50mm_Vertical (layer F.Cu) (tedit 5B7754C5) (tstamp 61517AD7) (at 169.672 116.332 270) (descr "JST XH series connector, B03B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator") (tags "connector JST XH side entry") (path /61506427) (fp_text reference J13 (at 2.5 -3.55 270) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value DO_1 (at 2.5 4.6 270) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -2.45 -2.35) (end -2.45 3.4) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 3.4) (end 7.45 3.4) (layer F.Fab) (width 0.1)) (fp_line (start 7.45 3.4) (end 7.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start 7.45 -2.35) (end -2.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -2.56 -2.46) (end -2.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 3.51) (end 7.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start 7.56 3.51) (end 7.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start 7.56 -2.46) (end -2.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start -2.95 -2.85) (end -2.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 3.9) (end 7.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start 7.95 3.9) (end 7.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start 7.95 -2.85) (end -2.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.625 -2.35) (end 0 -1.35) (layer F.Fab) (width 0.1)) (fp_line (start 0 -1.35) (end 0.625 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start 0.75 -2.45) (end 0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -1.7) (end 4.25 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 4.25 -1.7) (end 4.25 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 4.25 -2.45) (end 0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -2.45) (end -2.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -1.7) (end -0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -1.7) (end -0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -2.45) (end -2.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 5.75 -2.45) (end 5.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 5.75 -1.7) (end 7.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -1.7) (end 7.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -2.45) (end 5.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -0.2) (end -1.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 -0.2) (end -1.8 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 2.75) (end 2.5 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -0.2) (end 6.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 6.8 -0.2) (end 6.8 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 6.8 2.75) (end 2.5 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -1.6 -2.75) (end -2.85 -2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -2.85 -2.75) (end -2.85 -1.5) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 2.5 2.7 270) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 1 thru_hole roundrect (at 0 0 270) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (roundrect_rratio 0.147059) (net 27 +5V)) (pad 2 thru_hole oval (at 2.5 0 270) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (net 31 DO_1)) (pad 3 thru_hole oval (at 5 0 270) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (net 2 GND)) (model ${KISYS3DMOD}/Connector_JST.3dshapes/JST_XH_B03B-XH-A_1x03_P2.50mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_JST:JST_XH_B03B-XH-A_1x03_P2.50mm_Vertical (layer F.Cu) (tedit 5B7754C5) (tstamp 61517B01) (at 177.8 116.332 270) (descr "JST XH series connector, B03B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator") (tags "connector JST XH side entry") (path /6151135E) (fp_text reference J14 (at 2.5 -3.55 270) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value DO_2 (at 2.5 4.6 270) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 2.5 2.7 270) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -2.85 -2.75) (end -2.85 -1.5) (layer F.SilkS) (width 0.12)) (fp_line (start -1.6 -2.75) (end -2.85 -2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 6.8 2.75) (end 2.5 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 6.8 -0.2) (end 6.8 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -0.2) (end 6.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 2.75) (end 2.5 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 -0.2) (end -1.8 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -0.2) (end -1.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -2.45) (end 5.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -1.7) (end 7.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 5.75 -1.7) (end 7.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 5.75 -2.45) (end 5.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -2.45) (end -2.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -1.7) (end -0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -1.7) (end -0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -2.45) (end -2.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 4.25 -2.45) (end 0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 4.25 -1.7) (end 4.25 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -1.7) (end 4.25 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -2.45) (end 0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0 -1.35) (end 0.625 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -0.625 -2.35) (end 0 -1.35) (layer F.Fab) (width 0.1)) (fp_line (start 7.95 -2.85) (end -2.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start 7.95 3.9) (end 7.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 3.9) (end 7.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 -2.85) (end -2.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start 7.56 -2.46) (end -2.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start 7.56 3.51) (end 7.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 3.51) (end 7.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 -2.46) (end -2.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start 7.45 -2.35) (end -2.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start 7.45 3.4) (end 7.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 3.4) (end 7.45 3.4) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 -2.35) (end -2.45 3.4) (layer F.Fab) (width 0.1)) (pad 3 thru_hole oval (at 5 0 270) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (net 2 GND)) (pad 2 thru_hole oval (at 2.5 0 270) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (net 32 DO_2)) (pad 1 thru_hole roundrect (at 0 0 270) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (roundrect_rratio 0.147059) (net 27 +5V)) (model ${KISYS3DMOD}/Connector_JST.3dshapes/JST_XH_B03B-XH-A_1x03_P2.50mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_JST:JST_XH_B03B-XH-A_1x03_P2.50mm_Vertical (layer F.Cu) (tedit 5B7754C5) (tstamp 61517B2B) (at 185.928 116.332 270) (descr "JST XH series connector, B03B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator") (tags "connector JST XH side entry") (path /615127BD) (fp_text reference J15 (at 2.5 -3.55 270) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value DO_3 (at 2.5 4.6 270) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -2.45 -2.35) (end -2.45 3.4) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 3.4) (end 7.45 3.4) (layer F.Fab) (width 0.1)) (fp_line (start 7.45 3.4) (end 7.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start 7.45 -2.35) (end -2.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -2.56 -2.46) (end -2.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 3.51) (end 7.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start 7.56 3.51) (end 7.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start 7.56 -2.46) (end -2.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start -2.95 -2.85) (end -2.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 3.9) (end 7.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start 7.95 3.9) (end 7.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start 7.95 -2.85) (end -2.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.625 -2.35) (end 0 -1.35) (layer F.Fab) (width 0.1)) (fp_line (start 0 -1.35) (end 0.625 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start 0.75 -2.45) (end 0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -1.7) (end 4.25 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 4.25 -1.7) (end 4.25 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 4.25 -2.45) (end 0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -2.45) (end -2.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -1.7) (end -0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -1.7) (end -0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -2.45) (end -2.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 5.75 -2.45) (end 5.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 5.75 -1.7) (end 7.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -1.7) (end 7.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -2.45) (end 5.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -0.2) (end -1.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 -0.2) (end -1.8 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 2.75) (end 2.5 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -0.2) (end 6.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 6.8 -0.2) (end 6.8 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 6.8 2.75) (end 2.5 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -1.6 -2.75) (end -2.85 -2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -2.85 -2.75) (end -2.85 -1.5) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 2.5 2.7 270) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 1 thru_hole roundrect (at 0 0 270) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (roundrect_rratio 0.147059) (net 27 +5V)) (pad 2 thru_hole oval (at 2.5 0 270) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (net 33 DO_3)) (pad 3 thru_hole oval (at 5 0 270) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (net 2 GND)) (model ${KISYS3DMOD}/Connector_JST.3dshapes/JST_XH_B03B-XH-A_1x03_P2.50mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_JST:JST_XH_B03B-XH-A_1x03_P2.50mm_Vertical (layer F.Cu) (tedit 5B7754C5) (tstamp 61517B55) (at 194.056 116.332 270) (descr "JST XH series connector, B03B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator") (tags "connector JST XH side entry") (path /61513F3B) (fp_text reference J16 (at 2.5 -3.55 270) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value DO_4 (at 2.5 4.6 270) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 2.5 2.7 270) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -2.85 -2.75) (end -2.85 -1.5) (layer F.SilkS) (width 0.12)) (fp_line (start -1.6 -2.75) (end -2.85 -2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 6.8 2.75) (end 2.5 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 6.8 -0.2) (end 6.8 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -0.2) (end 6.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 2.75) (end 2.5 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 -0.2) (end -1.8 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -0.2) (end -1.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -2.45) (end 5.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -1.7) (end 7.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 5.75 -1.7) (end 7.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 5.75 -2.45) (end 5.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -2.45) (end -2.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -1.7) (end -0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -1.7) (end -0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -2.45) (end -2.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 4.25 -2.45) (end 0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 4.25 -1.7) (end 4.25 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -1.7) (end 4.25 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -2.45) (end 0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0 -1.35) (end 0.625 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -0.625 -2.35) (end 0 -1.35) (layer F.Fab) (width 0.1)) (fp_line (start 7.95 -2.85) (end -2.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start 7.95 3.9) (end 7.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 3.9) (end 7.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 -2.85) (end -2.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start 7.56 -2.46) (end -2.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start 7.56 3.51) (end 7.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 3.51) (end 7.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 -2.46) (end -2.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start 7.45 -2.35) (end -2.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start 7.45 3.4) (end 7.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 3.4) (end 7.45 3.4) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 -2.35) (end -2.45 3.4) (layer F.Fab) (width 0.1)) (pad 3 thru_hole oval (at 5 0 270) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (net 2 GND)) (pad 2 thru_hole oval (at 2.5 0 270) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (net 34 DO_4)) (pad 1 thru_hole roundrect (at 0 0 270) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (roundrect_rratio 0.147059) (net 27 +5V)) (model ${KISYS3DMOD}/Connector_JST.3dshapes/JST_XH_B03B-XH-A_1x03_P2.50mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_JST:JST_XH_B03B-XH-A_1x03_P2.50mm_Vertical (layer F.Cu) (tedit 5B7754C5) (tstamp 61517B7F) (at 202.184 116.332 270) (descr "JST XH series connector, B03B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator") (tags "connector JST XH side entry") (path /61515AB7) (fp_text reference J17 (at 2.5 -3.55 270) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value DO_5 (at 2.5 4.6 270) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -2.45 -2.35) (end -2.45 3.4) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 3.4) (end 7.45 3.4) (layer F.Fab) (width 0.1)) (fp_line (start 7.45 3.4) (end 7.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start 7.45 -2.35) (end -2.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -2.56 -2.46) (end -2.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 3.51) (end 7.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start 7.56 3.51) (end 7.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start 7.56 -2.46) (end -2.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start -2.95 -2.85) (end -2.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 3.9) (end 7.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start 7.95 3.9) (end 7.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start 7.95 -2.85) (end -2.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.625 -2.35) (end 0 -1.35) (layer F.Fab) (width 0.1)) (fp_line (start 0 -1.35) (end 0.625 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start 0.75 -2.45) (end 0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -1.7) (end 4.25 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 4.25 -1.7) (end 4.25 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 4.25 -2.45) (end 0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -2.45) (end -2.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -1.7) (end -0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -1.7) (end -0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -2.45) (end -2.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 5.75 -2.45) (end 5.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 5.75 -1.7) (end 7.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -1.7) (end 7.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -2.45) (end 5.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -0.2) (end -1.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 -0.2) (end -1.8 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 2.75) (end 2.5 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -0.2) (end 6.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 6.8 -0.2) (end 6.8 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 6.8 2.75) (end 2.5 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -1.6 -2.75) (end -2.85 -2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -2.85 -2.75) (end -2.85 -1.5) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 2.5 2.7 270) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 1 thru_hole roundrect (at 0 0 270) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (roundrect_rratio 0.147059) (net 27 +5V)) (pad 2 thru_hole oval (at 2.5 0 270) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (net 35 DO_5)) (pad 3 thru_hole oval (at 5 0 270) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (net 2 GND)) (model ${KISYS3DMOD}/Connector_JST.3dshapes/JST_XH_B03B-XH-A_1x03_P2.50mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_JST:JST_XH_B03B-XH-A_1x03_P2.50mm_Vertical (layer F.Cu) (tedit 5B7754C5) (tstamp 61517BA9) (at 202.184 104.22 270) (descr "JST XH series connector, B03B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator") (tags "connector JST XH side entry") (path /61517E85) (fp_text reference J18 (at 2.5 -3.55 270) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value DI_1 (at 2.5 4.6 270) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -2.45 -2.35) (end -2.45 3.4) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 3.4) (end 7.45 3.4) (layer F.Fab) (width 0.1)) (fp_line (start 7.45 3.4) (end 7.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start 7.45 -2.35) (end -2.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -2.56 -2.46) (end -2.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 3.51) (end 7.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start 7.56 3.51) (end 7.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start 7.56 -2.46) (end -2.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start -2.95 -2.85) (end -2.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 3.9) (end 7.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start 7.95 3.9) (end 7.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start 7.95 -2.85) (end -2.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.625 -2.35) (end 0 -1.35) (layer F.Fab) (width 0.1)) (fp_line (start 0 -1.35) (end 0.625 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start 0.75 -2.45) (end 0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -1.7) (end 4.25 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 4.25 -1.7) (end 4.25 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 4.25 -2.45) (end 0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -2.45) (end -2.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -1.7) (end -0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -1.7) (end -0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -2.45) (end -2.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 5.75 -2.45) (end 5.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 5.75 -1.7) (end 7.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -1.7) (end 7.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -2.45) (end 5.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -0.2) (end -1.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 -0.2) (end -1.8 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 2.75) (end 2.5 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -0.2) (end 6.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 6.8 -0.2) (end 6.8 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 6.8 2.75) (end 2.5 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -1.6 -2.75) (end -2.85 -2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -2.85 -2.75) (end -2.85 -1.5) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 2.5 2.7 270) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 1 thru_hole roundrect (at 0 0 270) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (roundrect_rratio 0.147059) (net 27 +5V)) (pad 2 thru_hole oval (at 2.5 0 270) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (net 36 "Net-(J18-Pad2)")) (pad 3 thru_hole oval (at 5 0 270) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (net 2 GND)) (model ${KISYS3DMOD}/Connector_JST.3dshapes/JST_XH_B03B-XH-A_1x03_P2.50mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_JST:JST_XH_B03B-XH-A_1x03_P2.50mm_Vertical (layer F.Cu) (tedit 5B7754C5) (tstamp 61517BD3) (at 202.184 92.456 270) (descr "JST XH series connector, B03B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator") (tags "connector JST XH side entry") (path /6151F947) (fp_text reference J19 (at 2.5 -3.55 270) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value DI_2 (at 2.5 4.6 270) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -2.45 -2.35) (end -2.45 3.4) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 3.4) (end 7.45 3.4) (layer F.Fab) (width 0.1)) (fp_line (start 7.45 3.4) (end 7.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start 7.45 -2.35) (end -2.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -2.56 -2.46) (end -2.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 3.51) (end 7.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start 7.56 3.51) (end 7.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start 7.56 -2.46) (end -2.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start -2.95 -2.85) (end -2.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 3.9) (end 7.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start 7.95 3.9) (end 7.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start 7.95 -2.85) (end -2.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.625 -2.35) (end 0 -1.35) (layer F.Fab) (width 0.1)) (fp_line (start 0 -1.35) (end 0.625 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start 0.75 -2.45) (end 0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -1.7) (end 4.25 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 4.25 -1.7) (end 4.25 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 4.25 -2.45) (end 0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -2.45) (end -2.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -1.7) (end -0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -1.7) (end -0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -2.45) (end -2.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 5.75 -2.45) (end 5.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 5.75 -1.7) (end 7.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -1.7) (end 7.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -2.45) (end 5.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -0.2) (end -1.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 -0.2) (end -1.8 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 2.75) (end 2.5 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -0.2) (end 6.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 6.8 -0.2) (end 6.8 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 6.8 2.75) (end 2.5 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -1.6 -2.75) (end -2.85 -2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -2.85 -2.75) (end -2.85 -1.5) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 2.5 2.7 270) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 1 thru_hole roundrect (at 0 0 270) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (roundrect_rratio 0.147059) (net 27 +5V)) (pad 2 thru_hole oval (at 2.5 0 270) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (net 37 "Net-(J19-Pad2)")) (pad 3 thru_hole oval (at 5 0 270) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (net 2 GND)) (model ${KISYS3DMOD}/Connector_JST.3dshapes/JST_XH_B03B-XH-A_1x03_P2.50mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_JST:JST_XH_B04B-XH-A_1x04_P2.50mm_Vertical (layer F.Cu) (tedit 5B7754C5) (tstamp 61517BFE) (at 54.665001 99.918001) (descr "JST XH series connector, B04B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator") (tags "connector JST XH side entry") (path /614F5665) (fp_text reference J20 (at 3.75 -3.55) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value I2C_1 (at 3.75 4.6) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -2.45 -2.35) (end -2.45 3.4) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 3.4) (end 9.95 3.4) (layer F.Fab) (width 0.1)) (fp_line (start 9.95 3.4) (end 9.95 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start 9.95 -2.35) (end -2.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -2.56 -2.46) (end -2.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 3.51) (end 10.06 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start 10.06 3.51) (end 10.06 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start 10.06 -2.46) (end -2.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start -2.95 -2.85) (end -2.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 3.9) (end 10.45 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start 10.45 3.9) (end 10.45 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start 10.45 -2.85) (end -2.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.625 -2.35) (end 0 -1.35) (layer F.Fab) (width 0.1)) (fp_line (start 0 -1.35) (end 0.625 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start 0.75 -2.45) (end 0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -1.7) (end 6.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 6.75 -1.7) (end 6.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 6.75 -2.45) (end 0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -2.45) (end -2.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -1.7) (end -0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -1.7) (end -0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -2.45) (end -2.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 8.25 -2.45) (end 8.25 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 8.25 -1.7) (end 10.05 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 10.05 -1.7) (end 10.05 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 10.05 -2.45) (end 8.25 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -0.2) (end -1.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 -0.2) (end -1.8 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 2.75) (end 3.75 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 10.05 -0.2) (end 9.3 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 9.3 -0.2) (end 9.3 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 9.3 2.75) (end 3.75 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -1.6 -2.75) (end -2.85 -2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -2.85 -2.75) (end -2.85 -1.5) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 3.75 2.7) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 1 thru_hole roundrect (at 0 0) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (roundrect_rratio 0.147059) (net 40 +3V3)) (pad 2 thru_hole oval (at 2.5 0) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (net 39 I2C_SDA)) (pad 3 thru_hole oval (at 5 0) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (net 38 I2C_SCL)) (pad 4 thru_hole oval (at 7.5 0) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (net 2 GND)) (model ${KISYS3DMOD}/Connector_JST.3dshapes/JST_XH_B04B-XH-A_1x04_P2.50mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_JST:JST_XH_B04B-XH-A_1x04_P2.50mm_Vertical (layer F.Cu) (tedit 5B7754C5) (tstamp 61517C29) (at 36.215001 106.718001) (descr "JST XH series connector, B04B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator") (tags "connector JST XH side entry") (path /614FAF44) (fp_text reference J21 (at 3.75 -3.55) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value I2C_2 (at 3.75 4.6) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -2.45 -2.35) (end -2.45 3.4) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 3.4) (end 9.95 3.4) (layer F.Fab) (width 0.1)) (fp_line (start 9.95 3.4) (end 9.95 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start 9.95 -2.35) (end -2.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -2.56 -2.46) (end -2.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 3.51) (end 10.06 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start 10.06 3.51) (end 10.06 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start 10.06 -2.46) (end -2.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start -2.95 -2.85) (end -2.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 3.9) (end 10.45 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start 10.45 3.9) (end 10.45 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start 10.45 -2.85) (end -2.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.625 -2.35) (end 0 -1.35) (layer F.Fab) (width 0.1)) (fp_line (start 0 -1.35) (end 0.625 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start 0.75 -2.45) (end 0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -1.7) (end 6.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 6.75 -1.7) (end 6.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 6.75 -2.45) (end 0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -2.45) (end -2.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -1.7) (end -0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -1.7) (end -0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -2.45) (end -2.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 8.25 -2.45) (end 8.25 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 8.25 -1.7) (end 10.05 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 10.05 -1.7) (end 10.05 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 10.05 -2.45) (end 8.25 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -0.2) (end -1.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 -0.2) (end -1.8 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 2.75) (end 3.75 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 10.05 -0.2) (end 9.3 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 9.3 -0.2) (end 9.3 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 9.3 2.75) (end 3.75 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -1.6 -2.75) (end -2.85 -2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -2.85 -2.75) (end -2.85 -1.5) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 3.75 2.7) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 1 thru_hole roundrect (at 0 0) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (roundrect_rratio 0.147059) (net 40 +3V3)) (pad 2 thru_hole oval (at 2.5 0) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (net 41 UART_RX)) (pad 3 thru_hole oval (at 5 0) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (net 42 UART_TX)) (pad 4 thru_hole oval (at 7.5 0) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (net 2 GND)) (model ${KISYS3DMOD}/Connector_JST.3dshapes/JST_XH_B04B-XH-A_1x04_P2.50mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_JST:JST_XH_B02B-XH-A_1x02_P2.50mm_Vertical (layer F.Cu) (tedit 5B7754C5) (tstamp 61517C52) (at 181.316 133.604 180) (descr "JST XH series connector, B02B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator") (tags "connector JST XH side entry") (path /614EF011) (fp_text reference J22 (at 1.25 -3.55 180) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value ADC_GENERIC (at 1.25 4.6 180) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 1.25 2.7 180) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -2.85 -2.75) (end -2.85 -1.5) (layer F.SilkS) (width 0.12)) (fp_line (start -1.6 -2.75) (end -2.85 -2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 4.3 2.75) (end 1.25 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 4.3 -0.2) (end 4.3 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 5.05 -0.2) (end 4.3 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 2.75) (end 1.25 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 -0.2) (end -1.8 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -0.2) (end -1.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 5.05 -2.45) (end 3.25 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 5.05 -1.7) (end 5.05 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 3.25 -1.7) (end 5.05 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 3.25 -2.45) (end 3.25 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -2.45) (end -2.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -1.7) (end -0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -1.7) (end -0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -2.45) (end -2.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 1.75 -2.45) (end 0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 1.75 -1.7) (end 1.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -1.7) (end 1.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -2.45) (end 0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0 -1.35) (end 0.625 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -0.625 -2.35) (end 0 -1.35) (layer F.Fab) (width 0.1)) (fp_line (start 5.45 -2.85) (end -2.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start 5.45 3.9) (end 5.45 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 3.9) (end 5.45 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 -2.85) (end -2.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start 5.06 -2.46) (end -2.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start 5.06 3.51) (end 5.06 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 3.51) (end 5.06 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 -2.46) (end -2.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start 4.95 -2.35) (end -2.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start 4.95 3.4) (end 4.95 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 3.4) (end 4.95 3.4) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 -2.35) (end -2.45 3.4) (layer F.Fab) (width 0.1)) (pad 2 thru_hole oval (at 2.5 0 180) (size 1.7 2) (drill 1) (layers *.Cu *.Mask) (net 2 GND)) (pad 1 thru_hole roundrect (at 0 0 180) (size 1.7 2) (drill 1) (layers *.Cu *.Mask) (roundrect_rratio 0.147059) (net 43 "Net-(J22-Pad1)")) (model ${KISYS3DMOD}/Connector_JST.3dshapes/JST_XH_B02B-XH-A_1x02_P2.50mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_JST:JST_XH_B02B-XH-A_1x02_P2.50mm_Vertical (layer F.Cu) (tedit 5B7754C5) (tstamp 61517C7B) (at 190.46 133.604 180) (descr "JST XH series connector, B02B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator") (tags "connector JST XH side entry") (path /614F0D6B) (fp_text reference J23 (at 1.25 -3.55 180) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value ADC_PT1000 (at 1.25 4.6 180) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -2.45 -2.35) (end -2.45 3.4) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 3.4) (end 4.95 3.4) (layer F.Fab) (width 0.1)) (fp_line (start 4.95 3.4) (end 4.95 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start 4.95 -2.35) (end -2.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -2.56 -2.46) (end -2.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 3.51) (end 5.06 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start 5.06 3.51) (end 5.06 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start 5.06 -2.46) (end -2.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start -2.95 -2.85) (end -2.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 3.9) (end 5.45 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start 5.45 3.9) (end 5.45 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start 5.45 -2.85) (end -2.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.625 -2.35) (end 0 -1.35) (layer F.Fab) (width 0.1)) (fp_line (start 0 -1.35) (end 0.625 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start 0.75 -2.45) (end 0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -1.7) (end 1.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 1.75 -1.7) (end 1.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 1.75 -2.45) (end 0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -2.45) (end -2.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -1.7) (end -0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -1.7) (end -0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -2.45) (end -2.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 3.25 -2.45) (end 3.25 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 3.25 -1.7) (end 5.05 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 5.05 -1.7) (end 5.05 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 5.05 -2.45) (end 3.25 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -0.2) (end -1.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 -0.2) (end -1.8 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 2.75) (end 1.25 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 5.05 -0.2) (end 4.3 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 4.3 -0.2) (end 4.3 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 4.3 2.75) (end 1.25 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -1.6 -2.75) (end -2.85 -2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -2.85 -2.75) (end -2.85 -1.5) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 1.25 2.7 180) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 1 thru_hole roundrect (at 0 0 180) (size 1.7 2) (drill 1) (layers *.Cu *.Mask) (roundrect_rratio 0.147059) (net 44 "Net-(J23-Pad1)")) (pad 2 thru_hole oval (at 2.5 0 180) (size 1.7 2) (drill 1) (layers *.Cu *.Mask) (net 2 GND)) (model ${KISYS3DMOD}/Connector_JST.3dshapes/JST_XH_B02B-XH-A_1x02_P2.50mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_JST:JST_XH_B03B-XH-A_1x03_P2.50mm_Vertical (layer F.Cu) (tedit 5B7754C5) (tstamp 61517CA5) (at 202.184 133.604 180) (descr "JST XH series connector, B03B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator") (tags "connector JST XH side entry") (path /614F1E8F) (fp_text reference J24 (at 2.5 -3.55 180) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value ADC_RAW (at 2.5 4.6 180) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 2.5 2.7 180) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -2.85 -2.75) (end -2.85 -1.5) (layer F.SilkS) (width 0.12)) (fp_line (start -1.6 -2.75) (end -2.85 -2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 6.8 2.75) (end 2.5 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 6.8 -0.2) (end 6.8 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -0.2) (end 6.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 2.75) (end 2.5 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 -0.2) (end -1.8 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -0.2) (end -1.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -2.45) (end 5.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -1.7) (end 7.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 5.75 -1.7) (end 7.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 5.75 -2.45) (end 5.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -2.45) (end -2.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -1.7) (end -0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -1.7) (end -0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -2.45) (end -2.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 4.25 -2.45) (end 0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 4.25 -1.7) (end 4.25 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -1.7) (end 4.25 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -2.45) (end 0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0 -1.35) (end 0.625 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -0.625 -2.35) (end 0 -1.35) (layer F.Fab) (width 0.1)) (fp_line (start 7.95 -2.85) (end -2.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start 7.95 3.9) (end 7.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 3.9) (end 7.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 -2.85) (end -2.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start 7.56 -2.46) (end -2.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start 7.56 3.51) (end 7.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 3.51) (end 7.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 -2.46) (end -2.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start 7.45 -2.35) (end -2.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start 7.45 3.4) (end 7.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 3.4) (end 7.45 3.4) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 -2.35) (end -2.45 3.4) (layer F.Fab) (width 0.1)) (pad 3 thru_hole oval (at 5 0 180) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (net 2 GND)) (pad 2 thru_hole oval (at 2.5 0 180) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (net 45 "Net-(J24-Pad2)")) (pad 1 thru_hole roundrect (at 0 0 180) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (roundrect_rratio 0.147059) (net 40 +3V3)) (model ${KISYS3DMOD}/Connector_JST.3dshapes/JST_XH_B03B-XH-A_1x03_P2.50mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_JST:JST_XH_B04B-XH-A_1x04_P2.50mm_Vertical (layer F.Cu) (tedit 5B7754C5) (tstamp 61517CD0) (at 129.66 107.696) (descr "JST XH series connector, B04B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator") (tags "connector JST XH side entry") (path /614F3F58) (fp_text reference J25 (at 3.75 -3.55) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value USB (at 3.75 4.6) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 3.75 2.7) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -2.85 -2.75) (end -2.85 -1.5) (layer F.SilkS) (width 0.12)) (fp_line (start -1.6 -2.75) (end -2.85 -2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 9.3 2.75) (end 3.75 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 9.3 -0.2) (end 9.3 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 10.05 -0.2) (end 9.3 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 2.75) (end 3.75 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 -0.2) (end -1.8 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -0.2) (end -1.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 10.05 -2.45) (end 8.25 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 10.05 -1.7) (end 10.05 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 8.25 -1.7) (end 10.05 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 8.25 -2.45) (end 8.25 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -2.45) (end -2.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -1.7) (end -0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -1.7) (end -0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -2.45) (end -2.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 6.75 -2.45) (end 0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 6.75 -1.7) (end 6.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -1.7) (end 6.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -2.45) (end 0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0 -1.35) (end 0.625 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -0.625 -2.35) (end 0 -1.35) (layer F.Fab) (width 0.1)) (fp_line (start 10.45 -2.85) (end -2.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start 10.45 3.9) (end 10.45 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 3.9) (end 10.45 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 -2.85) (end -2.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start 10.06 -2.46) (end -2.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start 10.06 3.51) (end 10.06 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 3.51) (end 10.06 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 -2.46) (end -2.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start 9.95 -2.35) (end -2.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start 9.95 3.4) (end 9.95 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 3.4) (end 9.95 3.4) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 -2.35) (end -2.45 3.4) (layer F.Fab) (width 0.1)) (pad 4 thru_hole oval (at 7.5 0) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (net 2 GND)) (pad 3 thru_hole oval (at 5 0) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (net 46 USB_DM)) (pad 2 thru_hole oval (at 2.5 0) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (net 47 USB_DP)) (pad 1 thru_hole roundrect (at 0 0) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (roundrect_rratio 0.147059) (net 28 V_USB)) (model ${KISYS3DMOD}/Connector_JST.3dshapes/JST_XH_B04B-XH-A_1x04_P2.50mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_JST:JST_XH_B04B-XH-A_1x04_P2.50mm_Vertical (layer F.Cu) (tedit 5B7754C5) (tstamp 61517CFB) (at 36.215001 120.318001) (descr "JST XH series connector, B04B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator") (tags "connector JST XH side entry") (path /614F924B) (fp_text reference J26 (at 3.75 -3.55) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value I2C_2 (at 3.75 4.6) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 3.75 2.7) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -2.85 -2.75) (end -2.85 -1.5) (layer F.SilkS) (width 0.12)) (fp_line (start -1.6 -2.75) (end -2.85 -2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 9.3 2.75) (end 3.75 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 9.3 -0.2) (end 9.3 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 10.05 -0.2) (end 9.3 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 2.75) (end 3.75 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 -0.2) (end -1.8 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -0.2) (end -1.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 10.05 -2.45) (end 8.25 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 10.05 -1.7) (end 10.05 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 8.25 -1.7) (end 10.05 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 8.25 -2.45) (end 8.25 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -2.45) (end -2.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -1.7) (end -0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -1.7) (end -0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -2.45) (end -2.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 6.75 -2.45) (end 0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 6.75 -1.7) (end 6.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -1.7) (end 6.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -2.45) (end 0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0 -1.35) (end 0.625 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -0.625 -2.35) (end 0 -1.35) (layer F.Fab) (width 0.1)) (fp_line (start 10.45 -2.85) (end -2.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start 10.45 3.9) (end 10.45 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 3.9) (end 10.45 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 -2.85) (end -2.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start 10.06 -2.46) (end -2.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start 10.06 3.51) (end 10.06 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 3.51) (end 10.06 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 -2.46) (end -2.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start 9.95 -2.35) (end -2.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start 9.95 3.4) (end 9.95 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 3.4) (end 9.95 3.4) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 -2.35) (end -2.45 3.4) (layer F.Fab) (width 0.1)) (pad 4 thru_hole oval (at 7.5 0) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (net 2 GND)) (pad 3 thru_hole oval (at 5 0) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (net 38 I2C_SCL)) (pad 2 thru_hole oval (at 2.5 0) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (net 39 I2C_SDA)) (pad 1 thru_hole roundrect (at 0 0) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (roundrect_rratio 0.147059) (net 40 +3V3)) (model ${KISYS3DMOD}/Connector_JST.3dshapes/JST_XH_B04B-XH-A_1x04_P2.50mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_JST:JST_XH_B06B-XH-A_1x06_P2.50mm_Vertical (layer F.Cu) (tedit 5B7754C5) (tstamp 61517D28) (at 36.215001 99.918001) (descr "JST XH series connector, B06B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator") (tags "connector JST XH side entry") (path /614FE261) (fp_text reference J27 (at 6.25 -3.55) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value SPI (at 6.25 4.6) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -2.45 -2.35) (end -2.45 3.4) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 3.4) (end 14.95 3.4) (layer F.Fab) (width 0.1)) (fp_line (start 14.95 3.4) (end 14.95 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start 14.95 -2.35) (end -2.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -2.56 -2.46) (end -2.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 3.51) (end 15.06 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start 15.06 3.51) (end 15.06 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start 15.06 -2.46) (end -2.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start -2.95 -2.85) (end -2.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 3.9) (end 15.45 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start 15.45 3.9) (end 15.45 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start 15.45 -2.85) (end -2.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.625 -2.35) (end 0 -1.35) (layer F.Fab) (width 0.1)) (fp_line (start 0 -1.35) (end 0.625 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start 0.75 -2.45) (end 0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -1.7) (end 11.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 11.75 -1.7) (end 11.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 11.75 -2.45) (end 0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -2.45) (end -2.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -1.7) (end -0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -1.7) (end -0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -2.45) (end -2.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 13.25 -2.45) (end 13.25 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 13.25 -1.7) (end 15.05 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 15.05 -1.7) (end 15.05 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 15.05 -2.45) (end 13.25 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -0.2) (end -1.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 -0.2) (end -1.8 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 2.75) (end 6.25 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 15.05 -0.2) (end 14.3 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 14.3 -0.2) (end 14.3 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 14.3 2.75) (end 6.25 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -1.6 -2.75) (end -2.85 -2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -2.85 -2.75) (end -2.85 -1.5) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 6.25 2.7) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 1 thru_hole roundrect (at 0 0) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (roundrect_rratio 0.147059) (net 40 +3V3)) (pad 2 thru_hole oval (at 2.5 0) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (net 48 SPI_MISO)) (pad 3 thru_hole oval (at 5 0) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (net 49 SPI_CS)) (pad 4 thru_hole oval (at 7.5 0) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (net 50 SPI_SCK)) (pad 5 thru_hole oval (at 10 0) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (net 51 SPI_MOSI)) (pad 6 thru_hole oval (at 12.5 0) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (net 2 GND)) (model ${KISYS3DMOD}/Connector_JST.3dshapes/JST_XH_B06B-XH-A_1x06_P2.50mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Package_TO_SOT_SMD:SOT-223 (layer F.Cu) (tedit 5A02FF57) (tstamp 61517D3E) (at 103.635001 88.588001) (descr "module CMS SOT223 4 pins") (tags "CMS SOT") (path /6166392B) (attr smd) (fp_text reference Q1 (at 0 -4.5) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value NCV8402 (at 0 4.5) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.8 0.8) (thickness 0.12))) ) (fp_line (start -1.85 -2.3) (end -0.8 -3.35) (layer F.Fab) (width 0.1)) (fp_line (start 1.91 3.41) (end 1.91 2.15) (layer F.SilkS) (width 0.12)) (fp_line (start 1.91 -3.41) (end 1.91 -2.15) (layer F.SilkS) (width 0.12)) (fp_line (start 4.4 -3.6) (end -4.4 -3.6) (layer F.CrtYd) (width 0.05)) (fp_line (start 4.4 3.6) (end 4.4 -3.6) (layer F.CrtYd) (width 0.05)) (fp_line (start -4.4 3.6) (end 4.4 3.6) (layer F.CrtYd) (width 0.05)) (fp_line (start -4.4 -3.6) (end -4.4 3.6) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.85 -2.3) (end -1.85 3.35) (layer F.Fab) (width 0.1)) (fp_line (start -1.85 3.41) (end 1.91 3.41) (layer F.SilkS) (width 0.12)) (fp_line (start -0.8 -3.35) (end 1.85 -3.35) (layer F.Fab) (width 0.1)) (fp_line (start -4.1 -3.41) (end 1.91 -3.41) (layer F.SilkS) (width 0.12)) (fp_line (start -1.85 3.35) (end 1.85 3.35) (layer F.Fab) (width 0.1)) (fp_line (start 1.85 -3.35) (end 1.85 3.35) (layer F.Fab) (width 0.1)) (pad 4 smd rect (at 3.15 0) (size 2 3.8) (layers F.Cu F.Paste F.Mask) (net 14 "Net-(D2-Pad2)")) (pad 2 smd rect (at -3.15 0) (size 2 1.5) (layers F.Cu F.Paste F.Mask) (net 14 "Net-(D2-Pad2)")) (pad 3 smd rect (at -3.15 2.3) (size 2 1.5) (layers F.Cu F.Paste F.Mask) (net 2 GND)) (pad 1 smd rect (at -3.15 -2.3) (size 2 1.5) (layers F.Cu F.Paste F.Mask) (net 52 "Net-(Q1-Pad1)")) (model ${KISYS3DMOD}/Package_TO_SOT_SMD.3dshapes/SOT-223.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Package_TO_SOT_SMD:SOT-223 (layer F.Cu) (tedit 5A02FF57) (tstamp 61517D54) (at 108.102 98.552) (descr "module CMS SOT223 4 pins") (tags "CMS SOT") (path /616A194E) (attr smd) (fp_text reference Q2 (at 0 -4.5) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value NCV8402 (at 0 4.5) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.85 -3.35) (end 1.85 3.35) (layer F.Fab) (width 0.1)) (fp_line (start -1.85 3.35) (end 1.85 3.35) (layer F.Fab) (width 0.1)) (fp_line (start -4.1 -3.41) (end 1.91 -3.41) (layer F.SilkS) (width 0.12)) (fp_line (start -0.8 -3.35) (end 1.85 -3.35) (layer F.Fab) (width 0.1)) (fp_line (start -1.85 3.41) (end 1.91 3.41) (layer F.SilkS) (width 0.12)) (fp_line (start -1.85 -2.3) (end -1.85 3.35) (layer F.Fab) (width 0.1)) (fp_line (start -4.4 -3.6) (end -4.4 3.6) (layer F.CrtYd) (width 0.05)) (fp_line (start -4.4 3.6) (end 4.4 3.6) (layer F.CrtYd) (width 0.05)) (fp_line (start 4.4 3.6) (end 4.4 -3.6) (layer F.CrtYd) (width 0.05)) (fp_line (start 4.4 -3.6) (end -4.4 -3.6) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.91 -3.41) (end 1.91 -2.15) (layer F.SilkS) (width 0.12)) (fp_line (start 1.91 3.41) (end 1.91 2.15) (layer F.SilkS) (width 0.12)) (fp_line (start -1.85 -2.3) (end -0.8 -3.35) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.8 0.8) (thickness 0.12))) ) (pad 1 smd rect (at -3.15 -2.3) (size 2 1.5) (layers F.Cu F.Paste F.Mask) (net 53 "Net-(Q2-Pad1)")) (pad 3 smd rect (at -3.15 2.3) (size 2 1.5) (layers F.Cu F.Paste F.Mask) (net 2 GND)) (pad 2 smd rect (at -3.15 0) (size 2 1.5) (layers F.Cu F.Paste F.Mask) (net 15 "Net-(D3-Pad2)")) (pad 4 smd rect (at 3.15 0) (size 2 3.8) (layers F.Cu F.Paste F.Mask) (net 15 "Net-(D3-Pad2)")) (model ${KISYS3DMOD}/Package_TO_SOT_SMD.3dshapes/SOT-223.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Package_TO_SOT_SMD:SOT-223 (layer F.Cu) (tedit 5A02FF57) (tstamp 61517D6A) (at 59.665001 131.918001) (descr "module CMS SOT223 4 pins") (tags "CMS SOT") (path /61659E30) (attr smd) (fp_text reference Q3 (at 0 -4.5) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value NCV8402 (at 0 4.5) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.8 0.8) (thickness 0.12))) ) (fp_line (start -1.85 -2.3) (end -0.8 -3.35) (layer F.Fab) (width 0.1)) (fp_line (start 1.91 3.41) (end 1.91 2.15) (layer F.SilkS) (width 0.12)) (fp_line (start 1.91 -3.41) (end 1.91 -2.15) (layer F.SilkS) (width 0.12)) (fp_line (start 4.4 -3.6) (end -4.4 -3.6) (layer F.CrtYd) (width 0.05)) (fp_line (start 4.4 3.6) (end 4.4 -3.6) (layer F.CrtYd) (width 0.05)) (fp_line (start -4.4 3.6) (end 4.4 3.6) (layer F.CrtYd) (width 0.05)) (fp_line (start -4.4 -3.6) (end -4.4 3.6) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.85 -2.3) (end -1.85 3.35) (layer F.Fab) (width 0.1)) (fp_line (start -1.85 3.41) (end 1.91 3.41) (layer F.SilkS) (width 0.12)) (fp_line (start -0.8 -3.35) (end 1.85 -3.35) (layer F.Fab) (width 0.1)) (fp_line (start -4.1 -3.41) (end 1.91 -3.41) (layer F.SilkS) (width 0.12)) (fp_line (start -1.85 3.35) (end 1.85 3.35) (layer F.Fab) (width 0.1)) (fp_line (start 1.85 -3.35) (end 1.85 3.35) (layer F.Fab) (width 0.1)) (pad 4 smd rect (at 3.15 0) (size 2 3.8) (layers F.Cu F.Paste F.Mask) (net 18 "Net-(D6-Pad2)")) (pad 2 smd rect (at -3.15 0) (size 2 1.5) (layers F.Cu F.Paste F.Mask) (net 18 "Net-(D6-Pad2)")) (pad 3 smd rect (at -3.15 2.3) (size 2 1.5) (layers F.Cu F.Paste F.Mask) (net 2 GND)) (pad 1 smd rect (at -3.15 -2.3) (size 2 1.5) (layers F.Cu F.Paste F.Mask) (net 54 "Net-(Q3-Pad1)")) (model ${KISYS3DMOD}/Package_TO_SOT_SMD.3dshapes/SOT-223.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Package_TO_SOT_SMD:SOT-223 (layer F.Cu) (tedit 5A02FF57) (tstamp 61517D80) (at 86.095001 106.238001) (descr "module CMS SOT223 4 pins") (tags "CMS SOT") (path /615EB7E6) (attr smd) (fp_text reference Q4 (at 0 -4.5) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value NCV8402 (at 0 4.5) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.8 0.8) (thickness 0.12))) ) (fp_line (start -1.85 -2.3) (end -0.8 -3.35) (layer F.Fab) (width 0.1)) (fp_line (start 1.91 3.41) (end 1.91 2.15) (layer F.SilkS) (width 0.12)) (fp_line (start 1.91 -3.41) (end 1.91 -2.15) (layer F.SilkS) (width 0.12)) (fp_line (start 4.4 -3.6) (end -4.4 -3.6) (layer F.CrtYd) (width 0.05)) (fp_line (start 4.4 3.6) (end 4.4 -3.6) (layer F.CrtYd) (width 0.05)) (fp_line (start -4.4 3.6) (end 4.4 3.6) (layer F.CrtYd) (width 0.05)) (fp_line (start -4.4 -3.6) (end -4.4 3.6) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.85 -2.3) (end -1.85 3.35) (layer F.Fab) (width 0.1)) (fp_line (start -1.85 3.41) (end 1.91 3.41) (layer F.SilkS) (width 0.12)) (fp_line (start -0.8 -3.35) (end 1.85 -3.35) (layer F.Fab) (width 0.1)) (fp_line (start -4.1 -3.41) (end 1.91 -3.41) (layer F.SilkS) (width 0.12)) (fp_line (start -1.85 3.35) (end 1.85 3.35) (layer F.Fab) (width 0.1)) (fp_line (start 1.85 -3.35) (end 1.85 3.35) (layer F.Fab) (width 0.1)) (pad 4 smd rect (at 3.15 0) (size 2 3.8) (layers F.Cu F.Paste F.Mask) (net 21 "Net-(D10-Pad2)")) (pad 2 smd rect (at -3.15 0) (size 2 1.5) (layers F.Cu F.Paste F.Mask) (net 21 "Net-(D10-Pad2)")) (pad 3 smd rect (at -3.15 2.3) (size 2 1.5) (layers F.Cu F.Paste F.Mask) (net 2 GND)) (pad 1 smd rect (at -3.15 -2.3) (size 2 1.5) (layers F.Cu F.Paste F.Mask) (net 55 "Net-(Q4-Pad1)")) (model ${KISYS3DMOD}/Package_TO_SOT_SMD.3dshapes/SOT-223.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Package_TO_SOT_SMD:SOT-223 (layer F.Cu) (tedit 5A02FF57) (tstamp 61517D96) (at 73.015001 121.068001) (descr "module CMS SOT223 4 pins") (tags "CMS SOT") (path /61653584) (attr smd) (fp_text reference Q5 (at 0 -4.5) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value NCV8402 (at 0 4.5) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.85 -3.35) (end 1.85 3.35) (layer F.Fab) (width 0.1)) (fp_line (start -1.85 3.35) (end 1.85 3.35) (layer F.Fab) (width 0.1)) (fp_line (start -4.1 -3.41) (end 1.91 -3.41) (layer F.SilkS) (width 0.12)) (fp_line (start -0.8 -3.35) (end 1.85 -3.35) (layer F.Fab) (width 0.1)) (fp_line (start -1.85 3.41) (end 1.91 3.41) (layer F.SilkS) (width 0.12)) (fp_line (start -1.85 -2.3) (end -1.85 3.35) (layer F.Fab) (width 0.1)) (fp_line (start -4.4 -3.6) (end -4.4 3.6) (layer F.CrtYd) (width 0.05)) (fp_line (start -4.4 3.6) (end 4.4 3.6) (layer F.CrtYd) (width 0.05)) (fp_line (start 4.4 3.6) (end 4.4 -3.6) (layer F.CrtYd) (width 0.05)) (fp_line (start 4.4 -3.6) (end -4.4 -3.6) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.91 -3.41) (end 1.91 -2.15) (layer F.SilkS) (width 0.12)) (fp_line (start 1.91 3.41) (end 1.91 2.15) (layer F.SilkS) (width 0.12)) (fp_line (start -1.85 -2.3) (end -0.8 -3.35) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.8 0.8) (thickness 0.12))) ) (pad 1 smd rect (at -3.15 -2.3) (size 2 1.5) (layers F.Cu F.Paste F.Mask) (net 56 "Net-(Q5-Pad1)")) (pad 3 smd rect (at -3.15 2.3) (size 2 1.5) (layers F.Cu F.Paste F.Mask) (net 2 GND)) (pad 2 smd rect (at -3.15 0) (size 2 1.5) (layers F.Cu F.Paste F.Mask) (net 24 "Net-(D11-Pad2)")) (pad 4 smd rect (at 3.15 0) (size 2 3.8) (layers F.Cu F.Paste F.Mask) (net 24 "Net-(D11-Pad2)")) (model ${KISYS3DMOD}/Package_TO_SOT_SMD.3dshapes/SOT-223.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 61517DA7) (at 136.652 125.984) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags resistor) (path /614E99DF) (attr smd) (fp_text reference R1 (at 0 -1.43) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 4K7 (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 12 "Net-(D1-Pad2)")) (pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 25 VIN)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 61517DB8) (at 62.155001 126.508001) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags resistor) (path /61663943) (attr smd) (fp_text reference R2 (at 0 -1.43) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 1K (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 57 FET_1)) (pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 52 "Net-(Q1-Pad1)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 61517DC9) (at 53.685001 138.868001) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags resistor) (path /616A1966) (attr smd) (fp_text reference R3 (at 0 -1.43) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 1K (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 53 "Net-(Q2-Pad1)")) (pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 58 FET_2)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 61517DDA) (at 86.825001 116.658001) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags resistor) (path /6166394A) (attr smd) (fp_text reference R4 (at 0 -1.43) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 10K (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 52 "Net-(Q1-Pad1)")) (pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 GND)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 61517DEB) (at 57.575001 136.298001) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags resistor) (path /616A196D) (attr smd) (fp_text reference R5 (at 0 -1.43) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 10K (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 GND)) (pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 53 "Net-(Q2-Pad1)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 61517DFC) (at 164.084 124.1805 90) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags resistor) (path /614E70D0) (attr smd) (fp_text reference R6 (at 0 -1.43 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 500R (at 0 1.43 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 1 smd roundrect (at -0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 59 "Net-(R6-Pad1)")) (pad 2 smd roundrect (at 0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 GND)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 6151C8C4) (at 164.084 120.396 90) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags resistor) (path /614E7548) (attr smd) (fp_text reference R7 (at 0 -1.43 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 2K2 (at 0 1.43 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (pad 2 smd roundrect (at 0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 17 "Net-(D4-Pad2)")) (pad 1 smd roundrect (at -0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 +12V)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 61517E1E) (at 59.705001 137.808001) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags resistor) (path /61659E48) (attr smd) (fp_text reference R8 (at 0 -1.43) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 1K (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 54 "Net-(Q3-Pad1)")) (pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 60 FAN_3)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 61517E2F) (at 65.595001 133.698001) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags resistor) (path /61659E4F) (attr smd) (fp_text reference R9 (at 0 -1.43) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 10K (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 54 "Net-(Q3-Pad1)")) (pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 GND)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 61517E40) (at 105.915001 92.968001) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags resistor) (path /61659E97) (attr smd) (fp_text reference R10 (at 0 -1.43) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 1K (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 3 TAC_3)) (pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 61 "Net-(D5-Pad2)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 61517E51) (at 86.825001 110.618001) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags resistor) (path /61659E9E) (attr smd) (fp_text reference R11 (at 0 -1.43) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 1K (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 26 "Net-(J7-Pad3)")) (pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 61 "Net-(D5-Pad2)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 61517E62) (at 86.825001 112.128001) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags resistor) (path /61659EA7) (attr smd) (fp_text reference R12 (at 0 -1.43) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 1K8 (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 40 +3V3)) (pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 26 "Net-(J7-Pad3)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 61517E73) (at 149.0725 114.808 180) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags resistor) (path /614E75BC) (attr smd) (fp_text reference R13 (at 0 -1.43 180) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 1K (at 0 1.43 180) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0 180) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 1 smd roundrect (at -0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 4 "Net-(C3-Pad1)")) (pad 2 smd roundrect (at 0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 20 "Net-(D7-Pad2)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 61517E84) (at 86.825001 115.148001) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags resistor) (path /615F73E0) (attr smd) (fp_text reference R14 (at 0 -1.43) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 1K (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 62 FAN_1)) (pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 55 "Net-(Q4-Pad1)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 61517E95) (at 22.015001 138.328001) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags resistor) (path /6165359C) (attr smd) (fp_text reference R15 (at 0 -1.43) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 1K (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 56 "Net-(Q5-Pad1)")) (pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 63 FAN_2)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 61517EA6) (at 54.565001 136.298001) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags resistor) (path /615F7E73) (attr smd) (fp_text reference R16 (at 0 -1.43) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 10K (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 55 "Net-(Q4-Pad1)")) (pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 GND)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 61517EB7) (at 105.915001 95.988001) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags resistor) (path /616535A3) (attr smd) (fp_text reference R17 (at 0 -1.43) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 10K (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 GND)) (pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 56 "Net-(Q5-Pad1)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 61517EC8) (at 105.915001 97.498001) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags resistor) (path /6162D47A) (attr smd) (fp_text reference R18 (at 0 -1.43) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 1K (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 64 "Net-(D8-Pad2)")) (pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 5 TAC_1)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 61517ED9) (at 65.595001 135.208001) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags resistor) (path /616535EB) (attr smd) (fp_text reference R19 (at 0 -1.43) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 1K (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 6 TAC_2)) (pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 65 "Net-(D9-Pad2)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 61517EEA) (at 68.605001 134.148001) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags resistor) (path /6162D619) (attr smd) (fp_text reference R20 (at 0 -1.43) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 1K (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 64 "Net-(D8-Pad2)")) (pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 29 "Net-(J11-Pad3)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 61517EFB) (at 63.595001 136.718001) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags resistor) (path /616535F2) (attr smd) (fp_text reference R21 (at 0 -1.43) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 1K (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 30 "Net-(J12-Pad3)")) (pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 65 "Net-(D9-Pad2)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 61517F0C) (at 66.605001 136.718001) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags resistor) (path /6163219C) (attr smd) (fp_text reference R22 (at 0 -1.43) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 1K8 (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 29 "Net-(J11-Pad3)")) (pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 40 +3V3)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 61517F1D) (at 62.715001 138.228001) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags resistor) (path /616535FB) (attr smd) (fp_text reference R23 (at 0 -1.43) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 1K8 (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 40 +3V3)) (pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 30 "Net-(J12-Pad3)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 61517F2E) (at 65.725001 138.228001) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags resistor) (path /6151CADE) (attr smd) (fp_text reference R24 (at 0 -1.43) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 10K (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 27 +5V)) (pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 7 DI_1)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 61517F3F) (at 87.395001 118.168001) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags resistor) (path /6151F972) (attr smd) (fp_text reference R25 (at 0 -1.43) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 10K (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 27 +5V)) (pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 8 DI_2)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 61517F50) (at 69.615001 135.658001) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags resistor) (path /6151A39E) (attr smd) (fp_text reference R26 (at 0 -1.43) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 1K (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 36 "Net-(J18-Pad2)")) (pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 7 DI_1)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 61517F61) (at 62.155001 124.998001) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags resistor) (path /6151F95D) (attr smd) (fp_text reference R27 (at 0 -1.43) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 1K (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 37 "Net-(J19-Pad2)")) (pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 8 DI_2)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 61517F72) (at 175.768 126.2125 270) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags resistor) (path /614EC903) (attr smd) (fp_text reference R28 (at 0 -1.43 270) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 4K7 (at 0 1.43 270) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0 270) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (pad 2 smd roundrect (at 0.7875 0 270) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 10 ADC_GENERIC)) (pad 1 smd roundrect (at -0.7875 0 270) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 40 +3V3)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 61517F83) (at 184.912 126.2125 270) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags resistor) (path /614ECC1F) (attr smd) (fp_text reference R29 (at 0 -1.43 270) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 1K (at 0 1.43 270) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0 270) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (pad 2 smd roundrect (at 0.7875 0 270) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 11 ADC_PT1000)) (pad 1 smd roundrect (at -0.7875 0 270) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 40 +3V3)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 61517F94) (at 194.056 127.7365 90) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags resistor) (path /6154F2D8) (attr smd) (fp_text reference R30 (at 0 -1.43 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 2K37 (at 0 1.43 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (pad 2 smd roundrect (at 0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 9 ADC_RAW)) (pad 1 smd roundrect (at -0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 66 "Net-(D12-Pad2)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 61517FA5) (at 176.5555 128.524 180) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags resistor) (path /6152E707) (attr smd) (fp_text reference R31 (at 0 -1.43 180) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 2K37 (at 0 1.43 180) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0 180) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (pad 2 smd roundrect (at 0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 10 ADC_GENERIC)) (pad 1 smd roundrect (at -0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 67 "Net-(D13-Pad2)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 61517FB6) (at 185.6995 128.524 180) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags resistor) (path /615602F1) (attr smd) (fp_text reference R32 (at 0 -1.43 180) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 2K37 (at 0 1.43 270) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0 180) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (pad 2 smd roundrect (at 0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 11 ADC_PT1000)) (pad 1 smd roundrect (at -0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 68 "Net-(D14-Pad2)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 61517FC7) (at 195.58 127.7365 90) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags resistor) (path /6154F2D1) (attr smd) (fp_text reference R33 (at 0 -1.43 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 2K37 (at 0 1.43 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 1 smd roundrect (at -0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 45 "Net-(J24-Pad2)")) (pad 2 smd roundrect (at 0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 66 "Net-(D12-Pad2)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 61517FD8) (at 183.388 128.2445 90) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags resistor) (path /6152E628) (attr smd) (fp_text reference R34 (at 0 -1.43 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 2K37 (at 0 1.43 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 1 smd roundrect (at -0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 43 "Net-(J22-Pad1)")) (pad 2 smd roundrect (at 0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 67 "Net-(D13-Pad2)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 61517FE9) (at 187.96 127.7365 90) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags resistor) (path /615602EA) (attr smd) (fp_text reference R35 (at 0 -1.43 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 2K37 (at 0 1.43 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (pad 2 smd roundrect (at 0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 68 "Net-(D14-Pad2)")) (pad 1 smd roundrect (at -0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 44 "Net-(J23-Pad1)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module custom-footprints:Raspberry-pico-smd (layer B.Cu) (tedit 614DE2F8) (tstamp 6151808C) (at 153.162 91.186 270) (descr "Through hole straight pin header, 2x20, 2.54mm pitch, double rows") (tags "Through hole pin header THT 2x20 2.54mm double row") (path /614E593E) (fp_text reference U1 (at 0 0 270) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value Raspberry-pico-smd (at 0 -2.159 270) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_line (start 1.1 -25.5) (end 1.5 -25.5) (layer B.SilkS) (width 0.12)) (fp_line (start -1.5 -25.5) (end -1.1 -25.5) (layer B.SilkS) (width 0.12)) (fp_line (start 10.5 -25.5) (end 3.7 -25.5) (layer B.SilkS) (width 0.12)) (fp_line (start 10.5 -15.1) (end 10.5 -15.5) (layer B.SilkS) (width 0.12)) (fp_line (start 10.5 -7.4) (end 10.5 -7.8) (layer B.SilkS) (width 0.12)) (fp_line (start 10.5 18) (end 10.5 17.6) (layer B.SilkS) (width 0.12)) (fp_line (start 10.5 25.5) (end 10.5 25.2) (layer B.SilkS) (width 0.12)) (fp_line (start 10.5 2.7) (end 10.5 2.3) (layer B.SilkS) (width 0.12)) (fp_line (start 10.5 -12.5) (end 10.5 -12.9) (layer B.SilkS) (width 0.12)) (fp_line (start 10.5 7.8) (end 10.5 7.4) (layer B.SilkS) (width 0.12)) (fp_line (start 10.5 12.9) (end 10.5 12.5) (layer B.SilkS) (width 0.12)) (fp_line (start 10.5 0.2) (end 10.5 -0.2) (layer B.SilkS) (width 0.12)) (fp_line (start 10.5 -4.9) (end 10.5 -5.3) (layer B.SilkS) (width 0.12)) (fp_line (start 10.5 -20.1) (end 10.5 -20.5) (layer B.SilkS) (width 0.12)) (fp_line (start 10.5 -22.7) (end 10.5 -23.1) (layer B.SilkS) (width 0.12)) (fp_line (start 10.5 -17.6) (end 10.5 -18) (layer B.SilkS) (width 0.12)) (fp_line (start 10.5 15.4) (end 10.5 15) (layer B.SilkS) (width 0.12)) (fp_line (start 10.5 23.1) (end 10.5 22.7) (layer B.SilkS) (width 0.12)) (fp_line (start 10.5 20.5) (end 10.5 20.1) (layer B.SilkS) (width 0.12)) (fp_line (start 10.5 -10) (end 10.5 -10.4) (layer B.SilkS) (width 0.12)) (fp_line (start 10.5 -2.3) (end 10.5 -2.7) (layer B.SilkS) (width 0.12)) (fp_line (start 10.5 5.3) (end 10.5 4.9) (layer B.SilkS) (width 0.12)) (fp_line (start 10.5 10.4) (end 10.5 10) (layer B.SilkS) (width 0.12)) (fp_line (start -10.5 -22.7) (end -10.5 -23.1) (layer B.SilkS) (width 0.12)) (fp_line (start -10.5 -20.1) (end -10.5 -20.5) (layer B.SilkS) (width 0.12)) (fp_line (start -10.5 -17.6) (end -10.5 -18) (layer B.SilkS) (width 0.12)) (fp_line (start -10.5 -15.1) (end -10.5 -15.5) (layer B.SilkS) (width 0.12)) (fp_line (start -10.5 -12.5) (end -10.5 -12.9) (layer B.SilkS) (width 0.12)) (fp_line (start -10.5 -10) (end -10.5 -10.4) (layer B.SilkS) (width 0.12)) (fp_line (start -10.5 -7.4) (end -10.5 -7.8) (layer B.SilkS) (width 0.12)) (fp_line (start -10.5 -4.9) (end -10.5 -5.3) (layer B.SilkS) (width 0.12)) (fp_line (start -10.5 -2.3) (end -10.5 -2.7) (layer B.SilkS) (width 0.12)) (fp_line (start -10.5 0.2) (end -10.5 -0.2) (layer B.SilkS) (width 0.12)) (fp_line (start -10.5 2.7) (end -10.5 2.3) (layer B.SilkS) (width 0.12)) (fp_line (start -10.5 5.3) (end -10.5 4.9) (layer B.SilkS) (width 0.12)) (fp_line (start -10.5 7.8) (end -10.5 7.4) (layer B.SilkS) (width 0.12)) (fp_line (start -10.5 10.4) (end -10.5 10) (layer B.SilkS) (width 0.12)) (fp_line (start -10.5 12.9) (end -10.5 12.5) (layer B.SilkS) (width 0.12)) (fp_line (start -10.5 15.4) (end -10.5 15) (layer B.SilkS) (width 0.12)) (fp_line (start -10.5 18) (end -10.5 17.6) (layer B.SilkS) (width 0.12)) (fp_line (start -10.5 20.5) (end -10.5 20.1) (layer B.SilkS) (width 0.12)) (fp_line (start -10.5 23.1) (end -10.5 22.7) (layer B.SilkS) (width 0.12)) (fp_line (start -10.5 25.5) (end -10.5 25.2) (layer B.SilkS) (width 0.12)) (fp_line (start -7.493 22.833) (end -7.493 25.5) (layer B.SilkS) (width 0.12)) (fp_line (start -10.5 22.833) (end -7.493 22.833) (layer B.SilkS) (width 0.12)) (fp_line (start -3.7 -25.5) (end -10.5 -25.5) (layer B.SilkS) (width 0.12)) (fp_line (start -10.5 25.5) (end 10.5 25.5) (layer B.SilkS) (width 0.12)) (fp_line (start -11 -26) (end -11 26) (layer B.CrtYd) (width 0.12)) (fp_line (start 11 -26) (end -11 -26) (layer B.CrtYd) (width 0.12)) (fp_line (start 11 26) (end 11 -26) (layer B.CrtYd) (width 0.12)) (fp_line (start -11 26) (end 11 26) (layer B.CrtYd) (width 0.12)) (fp_line (start -10.5 24.2) (end -9.2 25.5) (layer B.Fab) (width 0.12)) (fp_line (start -10.5 -25.5) (end -10.5 25.5) (layer B.Fab) (width 0.12)) (fp_line (start 10.5 -25.5) (end -10.5 -25.5) (layer B.Fab) (width 0.12)) (fp_line (start 10.5 25.5) (end 10.5 -25.5) (layer B.Fab) (width 0.12)) (fp_line (start -10.5 25.5) (end 10.5 25.5) (layer B.Fab) (width 0.12)) (fp_text user %R (at 0 0 90) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text user GP1 (at -6.604 21.59 225) (layer B.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15)) (justify mirror)) ) (fp_text user GP2 (at -6.604 16.51 225) (layer B.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15)) (justify mirror)) ) (fp_text user GP0 (at -6.604 24.13 225) (layer B.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15)) (justify mirror)) ) (fp_text user GP3 (at -6.604 13.97 225) (layer B.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15)) (justify mirror)) ) (fp_text user GP4 (at -6.604 11.43 225) (layer B.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15)) (justify mirror)) ) (fp_text user GP5 (at -6.604 8.89 225) (layer B.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15)) (justify mirror)) ) (fp_text user GP6 (at -6.604 3.556 225) (layer B.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15)) (justify mirror)) ) (fp_text user GP7 (at -6.604 1.27 225) (layer B.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15)) (justify mirror)) ) (fp_text user GP8 (at -6.604 -1.27 225) (layer B.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15)) (justify mirror)) ) (fp_text user GP9 (at -6.604 -3.81 225) (layer B.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15)) (justify mirror)) ) (fp_text user GP10 (at -6.35 -8.636 225) (layer B.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15)) (justify mirror)) ) (fp_text user GP11 (at -6.35 -11.176 225) (layer B.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15)) (justify mirror)) ) (fp_text user GP12 (at -6.35 -13.716 225) (layer B.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15)) (justify mirror)) ) (fp_text user GP13 (at -6.35 -16.256 225) (layer B.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15)) (justify mirror)) ) (fp_text user GP14 (at -6.35 -21.336 225) (layer B.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15)) (justify mirror)) ) (fp_text user GP15 (at -6.35 -23.876 225) (layer B.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15)) (justify mirror)) ) (fp_text user GP16 (at 6.35 -23.876 225) (layer B.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15)) (justify mirror)) ) (fp_text user GP17 (at 6.604 -21.336 225) (layer B.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15)) (justify mirror)) ) (fp_text user GP18 (at 6.35 -16.256 225) (layer B.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15)) (justify mirror)) ) (fp_text user GP19 (at 6.35 -13.716 225) (layer B.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15)) (justify mirror)) ) (fp_text user GP20 (at 6.35 -11.176 225) (layer B.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15)) (justify mirror)) ) (fp_text user GP21 (at 6.35 -8.636 225) (layer B.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15)) (justify mirror)) ) (fp_text user GP22 (at 6.35 -3.556 225) (layer B.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15)) (justify mirror)) ) (fp_text user RUN (at 6.604 -1.27 225) (layer B.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15)) (justify mirror)) ) (fp_text user GP26 (at 6.35 1.524 225) (layer B.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15)) (justify mirror)) ) (fp_text user GP27 (at 6.35 4.064 225) (layer B.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15)) (justify mirror)) ) (fp_text user GP28 (at 6.35 9.144 225) (layer B.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15)) (justify mirror)) ) (fp_text user ADC_VREF (at 5.588 10.668 225) (layer B.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15)) (justify mirror)) ) (fp_text user 3V3 (at 6.604 13.9 225) (layer B.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15)) (justify mirror)) ) (fp_text user 3V3_EN (at 5.842 15.748 225) (layer B.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15)) (justify mirror)) ) (fp_text user VSYS (at 6.35 21.59 225) (layer B.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15)) (justify mirror)) ) (fp_text user VBUS (at 6.35 23.876 225) (layer B.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15)) (justify mirror)) ) (fp_text user GND (at -6.604 19.05 225) (layer B.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15)) (justify mirror)) ) (fp_text user GND (at -6.604 6.35 225) (layer B.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15)) (justify mirror)) ) (fp_text user GND (at -6.604 -6.35 225) (layer B.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15)) (justify mirror)) ) (fp_text user GND (at -6.604 -19.05 225) (layer B.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15)) (justify mirror)) ) (fp_text user GND (at 6.604 -19.05 225) (layer B.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15)) (justify mirror)) ) (fp_text user GND (at 6.604 -6.35 225) (layer B.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15)) (justify mirror)) ) (fp_text user GND (at 6.604 19.05 225) (layer B.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15)) (justify mirror)) ) (fp_text user AGND (at 6.35 6.604 225) (layer B.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15)) (justify mirror)) ) (fp_text user SWCLK (at -2.54 -20.574 180) (layer B.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15)) (justify mirror)) ) (fp_text user SWDIO (at 2.54 -20.828 180) (layer B.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15)) (justify mirror)) ) (fp_text user GND (at 0 19.431 270) (layer B.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15)) (justify mirror)) ) (fp_text user DM (at 1.016 22.352 270) (layer B.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15)) (justify mirror)) ) (fp_text user DP (at -1.016 22.352 270) (layer B.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15)) (justify mirror)) ) (fp_text user GP23 (at 0.254 17.399 270) (layer B.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15)) (justify mirror)) ) (fp_text user GP25 (at 0.254 14.859 270) (layer B.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15)) (justify mirror)) ) (fp_text user BOOTSEL (at 1.27 12.446 270) (layer B.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15)) (justify mirror)) ) (fp_text user GND (at 0 -21.336 180) (layer B.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15)) (justify mirror)) ) (pad 1 smd rect (at -8.89 24.13 270) (size 3.5 1.7) (drill (offset -0.9 0)) (layers B.Cu B.Mask) (net 41 UART_RX)) (pad 2 smd rect (at -8.89 21.59 270) (size 3.5 1.7) (drill (offset -0.9 0)) (layers B.Cu B.Mask) (net 42 UART_TX)) (pad 3 smd rect (at -8.89 19.05 270) (size 3.5 1.7) (drill (offset -0.9 0)) (layers B.Cu B.Mask) (net 2 GND)) (pad 4 smd rect (at -8.89 16.51 270) (size 3.5 1.7) (drill (offset -0.9 0)) (layers B.Cu B.Mask) (net 39 I2C_SDA)) (pad 5 smd rect (at -8.89 13.97 270) (size 3.5 1.7) (drill (offset -0.9 0)) (layers B.Cu B.Mask) (net 38 I2C_SCL)) (pad 6 smd rect (at -8.89 11.43 270) (size 3.5 1.7) (drill (offset -0.9 0)) (layers B.Cu B.Mask) (net 48 SPI_MISO)) (pad 7 smd rect (at -8.89 8.89 270) (size 3.5 1.7) (drill (offset -0.9 0)) (layers B.Cu B.Mask) (net 49 SPI_CS)) (pad 8 smd rect (at -8.89 6.35 270) (size 3.5 1.7) (drill (offset -0.9 0)) (layers B.Cu B.Mask) (net 2 GND)) (pad 9 smd rect (at -8.89 3.81 270) (size 3.5 1.7) (drill (offset -0.9 0)) (layers B.Cu B.Mask) (net 50 SPI_SCK)) (pad 10 smd rect (at -8.89 1.27 270) (size 3.5 1.7) (drill (offset -0.9 0)) (layers B.Cu B.Mask) (net 51 SPI_MOSI)) (pad 11 smd rect (at -8.89 -1.27 270) (size 3.5 1.7) (drill (offset -0.9 0)) (layers B.Cu B.Mask) (net 62 FAN_1)) (pad 12 smd rect (at -8.89 -3.81 270) (size 3.5 1.7) (drill (offset -0.9 0)) (layers B.Cu B.Mask) (net 5 TAC_1)) (pad 13 smd rect (at -8.89 -6.35 270) (size 3.5 1.7) (drill (offset -0.9 0)) (layers B.Cu B.Mask) (net 2 GND)) (pad 14 smd rect (at -8.89 -8.89 270) (size 3.5 1.7) (drill (offset -0.9 0)) (layers B.Cu B.Mask) (net 63 FAN_2)) (pad 15 smd rect (at -8.89 -11.43 270) (size 3.5 1.7) (drill (offset -0.9 0)) (layers B.Cu B.Mask) (net 6 TAC_2)) (pad 16 smd rect (at -8.89 -13.97 270) (size 3.5 1.7) (drill (offset -0.9 0)) (layers B.Cu B.Mask) (net 60 FAN_3)) (pad 17 smd rect (at -8.89 -16.51 270) (size 3.5 1.7) (drill (offset -0.9 0)) (layers B.Cu B.Mask) (net 3 TAC_3)) (pad 18 smd rect (at -8.89 -19.05 270) (size 3.5 1.7) (drill (offset -0.9 0)) (layers B.Cu B.Mask) (net 2 GND)) (pad 19 smd rect (at -8.89 -21.59 270) (size 3.5 1.7) (drill (offset -0.9 0)) (layers B.Cu B.Mask) (net 57 FET_1)) (pad 20 smd rect (at -8.89 -24.13 270) (size 3.5 1.7) (drill (offset -0.9 0)) (layers B.Cu B.Mask) (net 58 FET_2)) (pad 40 smd rect (at 8.89 24.13 270) (size 3.5 1.7) (drill (offset 0.9 0)) (layers B.Cu B.Mask) (net 28 V_USB)) (pad 39 smd rect (at 8.89 21.59 270) (size 3.5 1.7) (drill (offset 0.9 0)) (layers B.Cu B.Mask) (net 27 +5V)) (pad 38 smd rect (at 8.89 19.05 270) (size 3.5 1.7) (drill (offset 0.9 0)) (layers B.Cu B.Mask) (net 2 GND)) (pad 37 smd rect (at 8.89 16.51 270) (size 3.5 1.7) (drill (offset 0.9 0)) (layers B.Cu B.Mask)) (pad 36 smd rect (at 8.89 13.97 270) (size 3.5 1.7) (drill (offset 0.9 0)) (layers B.Cu B.Mask) (net 40 +3V3)) (pad 35 smd rect (at 8.89 11.43 270) (size 3.5 1.7) (drill (offset 0.9 0)) (layers B.Cu B.Mask)) (pad 34 smd rect (at 8.89 8.89 270) (size 3.5 1.7) (drill (offset 0.9 0)) (layers B.Cu B.Mask) (net 10 ADC_GENERIC)) (pad 33 smd rect (at 8.89 6.35 270) (size 3.5 1.7) (drill (offset 0.9 0)) (layers B.Cu B.Mask) (net 2 GND)) (pad 32 smd rect (at 8.89 3.81 270) (size 3.5 1.7) (drill (offset 0.9 0)) (layers B.Cu B.Mask) (net 11 ADC_PT1000)) (pad 31 smd rect (at 8.89 1.27 270) (size 3.5 1.7) (drill (offset 0.9 0)) (layers B.Cu B.Mask) (net 9 ADC_RAW)) (pad 30 smd rect (at 8.89 -1.27 270) (size 3.5 1.7) (drill (offset 0.9 0)) (layers B.Cu B.Mask)) (pad 29 smd rect (at 8.89 -3.81 270) (size 3.5 1.7) (drill (offset 0.9 0)) (layers B.Cu B.Mask) (net 31 DO_1)) (pad 28 smd rect (at 8.89 -6.35 270) (size 3.5 1.7) (drill (offset 0.9 0)) (layers B.Cu B.Mask) (net 2 GND)) (pad 27 smd rect (at 8.89 -8.89 270) (size 3.5 1.7) (drill (offset 0.9 0)) (layers B.Cu B.Mask) (net 32 DO_2)) (pad 26 smd rect (at 8.89 -11.43 270) (size 3.5 1.7) (drill (offset 0.9 0)) (layers B.Cu B.Mask) (net 33 DO_3)) (pad 25 smd rect (at 8.89 -13.97 270) (size 3.5 1.7) (drill (offset 0.9 0)) (layers B.Cu B.Mask) (net 34 DO_4)) (pad 24 smd rect (at 8.89 -16.51 270) (size 3.5 1.7) (drill (offset 0.9 0)) (layers B.Cu B.Mask) (net 35 DO_5)) (pad 23 smd rect (at 8.89 -19.05 270) (size 3.5 1.7) (drill (offset 0.9 0)) (layers B.Cu B.Mask) (net 2 GND)) (pad 22 smd rect (at 8.89 -21.59 270) (size 3.5 1.7) (drill (offset 0.9 0)) (layers B.Cu B.Mask) (net 7 DI_1)) (pad 21 smd rect (at 8.89 -24.13 270) (size 3.5 1.7) (drill (offset 0.9 0)) (layers B.Cu B.Mask) (net 8 DI_2)) (pad "" np_thru_hole oval (at -2.725 24 270) (size 1.8 1.8) (drill 1.8) (layers *.Cu *.Mask)) (pad "" np_thru_hole oval (at 2.725 24 270) (size 1.8 1.8) (drill 1.8) (layers *.Cu *.Mask)) (pad "" np_thru_hole oval (at -2.425 20.97 270) (size 1.5 1.5) (drill 1.5) (layers *.Cu *.Mask)) (pad "" np_thru_hole oval (at 2.425 20.97 270) (size 1.5 1.5) (drill 1.5) (layers *.Cu *.Mask)) (pad 47 smd rect (at -2.54 -23.9 180) (size 3.5 1.7) (drill (offset -0.9 0)) (layers B.Cu B.Mask)) (pad 48 smd rect (at 0 -23.9 180) (size 3.5 1.7) (drill (offset -0.9 0)) (layers B.Cu B.Mask)) (pad 49 smd rect (at 2.54 -23.9 180) (size 3.5 1.7) (drill (offset -0.9 0)) (layers B.Cu B.Mask)) (pad 43 smd rect (at -1.016 23.876 270) (size 1.2 1.5) (layers B.Cu B.Mask) (net 47 USB_DP)) (pad 42 smd rect (at 1.016 23.876 270) (size 1.2 1.5) (layers B.Cu B.Mask) (net 46 USB_DM)) (pad 44 smd roundrect (at -2.54 17.526 270) (size 1.5 1.5) (layers B.Cu B.Mask) (roundrect_rratio 0.25)) (pad 45 smd roundrect (at -2.54 14.986 270) (size 1.5 1.5) (layers B.Cu B.Mask) (roundrect_rratio 0.25)) (pad 46 smd roundrect (at -2.54 12.573 270) (size 1.5 1.5) (layers B.Cu B.Mask) (roundrect_rratio 0.25)) (pad 41 smd roundrect (at 0 20.955 270) (size 1.5 1.5) (layers B.Cu B.Mask) (roundrect_rratio 0.25)) (model :custom:3rd-party/KiCad-RP-Pico-main/Pico.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module custom-footprints:OKI-T-DOSA-th (layer F.Cu) (tedit 614E66D6) (tstamp 61518099) (at 160.274 128.778 90) (path /614E6F4D) (fp_text reference U2 (at 0.508 -2.286 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value OKI-T/36W-W40N-C (at 2.286 -5.588 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -8.128 2.54) (end 12.7 2.54) (layer F.SilkS) (width 0.15)) (fp_line (start -8.128 -9.398) (end -8.128 2.54) (layer F.SilkS) (width 0.15)) (fp_line (start 12.7 -9.398) (end -8.128 -9.398) (layer F.SilkS) (width 0.15)) (fp_line (start 12.7 2.54) (end 12.7 -9.398) (layer F.SilkS) (width 0.15)) (pad 2 thru_hole roundrect (at -6.35 -7.874 90) (size 3.2 2.6) (drill 1.5) (layers *.Cu *.Mask) (roundrect_rratio 0.25) (net 25 VIN)) (pad 1 thru_hole roundrect (at 10.922 -7.874 90) (size 3.2 2.6) (drill 1.5) (layers *.Cu *.Mask) (roundrect_rratio 0.25)) (pad 5 thru_hole roundrect (at 6.35 0.762 90) (size 3.2 2.6) (drill 1.5) (layers *.Cu *.Mask) (roundrect_rratio 0.25) (net 1 +12V)) (pad 4 thru_hole roundrect (at 2.286 0.762 90) (size 3.2 2.6) (drill 1.5) (layers *.Cu *.Mask) (roundrect_rratio 0.25) (net 59 "Net-(R6-Pad1)")) (pad 3 thru_hole roundrect (at -1.778 0.762 90) (size 3.2 2.6) (drill 1.5) (layers *.Cu *.Mask) (roundrect_rratio 0.25) (net 2 GND)) ) (module custom-footprints:OKI-T-DOSA-th (layer F.Cu) (tedit 614E66D6) (tstamp 615180A6) (at 148.082 128.778 90) (path /614E6E71) (fp_text reference U3 (at 0.508 -2.286 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value OKI-T/36W-W40N-C (at 2.286 -5.588 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 12.7 2.54) (end 12.7 -9.398) (layer F.SilkS) (width 0.15)) (fp_line (start 12.7 -9.398) (end -8.128 -9.398) (layer F.SilkS) (width 0.15)) (fp_line (start -8.128 -9.398) (end -8.128 2.54) (layer F.SilkS) (width 0.15)) (fp_line (start -8.128 2.54) (end 12.7 2.54) (layer F.SilkS) (width 0.15)) (pad 3 thru_hole roundrect (at -1.778 0.762 90) (size 3.2 2.6) (drill 1.5) (layers *.Cu *.Mask) (roundrect_rratio 0.25) (net 2 GND)) (pad 4 thru_hole roundrect (at 2.286 0.762 90) (size 3.2 2.6) (drill 1.5) (layers *.Cu *.Mask) (roundrect_rratio 0.25)) (pad 5 thru_hole roundrect (at 6.35 0.762 90) (size 3.2 2.6) (drill 1.5) (layers *.Cu *.Mask) (roundrect_rratio 0.25) (net 4 "Net-(C3-Pad1)")) (pad 1 thru_hole roundrect (at 10.922 -7.874 90) (size 3.2 2.6) (drill 1.5) (layers *.Cu *.Mask) (roundrect_rratio 0.25)) (pad 2 thru_hole roundrect (at -6.35 -7.874 90) (size 3.2 2.6) (drill 1.5) (layers *.Cu *.Mask) (roundrect_rratio 0.25) (net 25 VIN)) ) (segment (start 159.636 122.428) (end 156.972 125.092) (width 2) (layer F.Cu) (net 1)) (segment (start 165.1 134.112) (end 165.1 131.064) (width 2) (layer F.Cu) (net 1)) (segment (start 161.036 122.428) (end 159.636 122.428) (width 2) (layer F.Cu) (net 1)) (segment (start 156.972 133.096) (end 159.004 135.128) (width 2) (layer F.Cu) (net 1)) (segment (start 156.972 125.092) (end 156.972 133.096) (width 2) (layer F.Cu) (net 1)) (segment (start 159.004 135.128) (end 164.084 135.128) (width 2) (layer F.Cu) (net 1)) (segment (start 164.084 135.128) (end 165.1 134.112) (width 2) (layer F.Cu) (net 1)) (segment (start 162.8395 122.428) (end 164.084 121.1835) (width 0.25) (layer F.Cu) (net 1)) (segment (start 161.036 122.428) (end 162.8395 122.428) (width 0.25) (layer F.Cu) (net 1)) (segment (start 147.444 122.428) (end 148.844 122.428) (width 2) (layer F.Cu) (net 4)) (segment (start 137.472 122.428) (end 147.444 122.428) (width 2) (layer F.Cu) (net 4)) (segment (start 132.588 117.544) (end 137.472 122.428) (width 2) (layer F.Cu) (net 4)) (segment (start 132.588 115.444) (end 132.588 117.544) (width 2) (layer F.Cu) (net 4)) (segment (start 149.86 121.412) (end 148.844 122.428) (width 0.25) (layer F.Cu) (net 4)) (segment (start 149.86 114.808) (end 149.86 121.412) (width 0.25) (layer F.Cu) (net 4)) (segment (start 136.78 111.252) (end 142.24 111.252) (width 2) (layer F.Cu) (net 4)) (segment (start 132.588 115.444) (end 136.78 111.252) (width 2) (layer F.Cu) (net 4)) (segment (start 194.005 127) (end 194.056 126.949) (width 0.25) (layer F.Cu) (net 9)) (segment (start 192.532 127) (end 194.005 127) (width 0.25) (layer F.Cu) (net 9)) (segment (start 192.532 127) (end 189.484 123.952) (width 0.25) (layer F.Cu) (net 9)) (segment (start 189.484 123.952) (end 166.24441 123.952) (width 0.25) (layer F.Cu) (net 9)) (segment (start 165.784028 117.699188) (end 160.35284 112.268) (width 0.25) (layer F.Cu) (net 9)) (segment (start 166.24441 123.952) (end 165.784028 123.491618) (width 0.25) (layer F.Cu) (net 9)) (segment (start 165.784028 123.491618) (end 165.784028 117.699188) (width 0.25) (layer F.Cu) (net 9)) (segment (start 160.35284 112.268) (end 152.4 112.268) (width 0.25) (layer F.Cu) (net 9)) (via (at 151.892 100.076) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 9)) (segment (start 152.4 112.268) (end 151.892 111.76) (width 0.25) (layer F.Cu) (net 9)) (segment (start 151.892 111.76) (end 151.892 100.076) (width 0.25) (layer F.Cu) (net 9)) (segment (start 175.768 128.524) (end 175.768 127) (width 0.25) (layer F.Cu) (net 10)) (segment (start 177.292 127) (end 175.768 127) (width 0.25) (layer F.Cu) (net 10)) (segment (start 144.272 111.252) (end 144.272 100.076) (width 0.25) (layer F.Cu) (net 10)) (segment (start 146.304 113.284) (end 144.272 111.252) (width 0.25) (layer F.Cu) (net 10)) (via (at 144.272 100.076) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 10)) (segment (start 175.768 127) (end 166.624 127) (width 0.25) (layer F.Cu) (net 10)) (segment (start 166.624 127) (end 164.88401 125.26001) (width 0.25) (layer F.Cu) (net 10)) (segment (start 164.88401 125.26001) (end 164.88401 118.07199) (width 0.25) (layer F.Cu) (net 10)) (segment (start 164.88401 118.07199) (end 160.09602 113.284) (width 0.25) (layer F.Cu) (net 10)) (segment (start 160.09602 113.284) (end 146.304 113.284) (width 0.25) (layer F.Cu) (net 10)) (segment (start 184.912 128.524) (end 184.912 127) (width 0.25) (layer F.Cu) (net 11)) (segment (start 184.912 127) (end 186.436 127) (width 0.25) (layer F.Cu) (net 11)) (segment (start 184.912 127) (end 182.372 124.46) (width 0.25) (layer F.Cu) (net 11)) (segment (start 182.372 124.46) (end 166.116 124.46) (width 0.25) (layer F.Cu) (net 11)) (segment (start 165.334019 117.885589) (end 160.22443 112.776) (width 0.25) (layer F.Cu) (net 11)) (segment (start 166.116 124.46) (end 165.33402 123.67802) (width 0.25) (layer F.Cu) (net 11)) (segment (start 165.33402 123.67802) (end 165.334019 117.885589) (width 0.25) (layer F.Cu) (net 11)) (segment (start 160.22443 112.776) (end 149.86 112.776) (width 0.25) (layer F.Cu) (net 11)) (via (at 149.352 100.076) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 11)) (segment (start 149.86 112.776) (end 149.352 112.268) (width 0.25) (layer F.Cu) (net 11)) (segment (start 149.352 112.268) (end 149.352 100.076) (width 0.25) (layer F.Cu) (net 11)) (segment (start 135.8645 125.984) (end 130.048 125.984) (width 0.25) (layer F.Cu) (net 12)) (segment (start 158.2165 119.6085) (end 153.416 114.808) (width 0.25) (layer F.Cu) (net 17)) (segment (start 164.084 119.6085) (end 158.2165 119.6085) (width 0.25) (layer F.Cu) (net 17)) (segment (start 148.285 114.808) (end 141.224 114.808) (width 0.25) (layer F.Cu) (net 20)) (segment (start 152.4 135.128) (end 140.208 135.128) (width 2) (layer F.Cu) (net 25)) (segment (start 137.588 135.128) (end 135.048 132.588) (width 2) (layer F.Cu) (net 25)) (segment (start 140.208 135.128) (end 137.588 135.128) (width 2) (layer F.Cu) (net 25)) (segment (start 136.598 132.588) (end 135.048 132.588) (width 0.25) (layer F.Cu) (net 25)) (segment (start 137.4395 131.7465) (end 136.598 132.588) (width 0.25) (layer F.Cu) (net 25)) (segment (start 137.4395 125.984) (end 137.4395 131.7465) (width 0.25) (layer F.Cu) (net 25)) (segment (start 132.588 105.156) (end 131.572 104.14) (width 0.25) (layer B.Cu) (net 27)) (segment (start 131.572 104.14) (end 131.572 100.076) (width 0.25) (layer B.Cu) (net 27)) (segment (start 142.24 108.712) (end 138.684 105.156) (width 0.25) (layer B.Cu) (net 27)) (segment (start 138.684 105.156) (end 132.588 105.156) (width 0.25) (layer B.Cu) (net 27)) (segment (start 202.184 116.332) (end 169.672 116.332) (width 2) (layer In1.Cu) (net 27)) (segment (start 169.672 116.332) (end 157.988 116.332) (width 2) (layer In1.Cu) (net 27)) (segment (start 150.368 108.712) (end 142.24 108.712) (width 2) (layer In1.Cu) (net 27)) (segment (start 157.988 116.332) (end 150.368 108.712) (width 2) (layer In1.Cu) (net 27)) (segment (start 129.032 100.076) (end 129.66 100.704) (width 0.25) (layer B.Cu) (net 28)) (segment (start 129.66 100.704) (end 129.66 107.696) (width 0.25) (layer B.Cu) (net 28)) (segment (start 129.66 107.696) (end 131.692 109.728) (width 0.25) (layer F.Cu) (net 28)) (segment (start 138.684 109.728) (end 142.24 106.172) (width 0.25) (layer F.Cu) (net 28)) (segment (start 131.692 109.728) (end 138.684 109.728) (width 0.25) (layer F.Cu) (net 28)) (segment (start 168.447 118.832) (end 161.375 111.76) (width 0.25) (layer F.Cu) (net 31)) (segment (start 169.672 118.832) (end 168.447 118.832) (width 0.25) (layer F.Cu) (net 31)) (segment (start 161.375 111.76) (end 157.988 111.76) (width 0.25) (layer F.Cu) (net 31)) (via (at 156.972 100.076) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 31)) (segment (start 157.988 111.76) (end 156.972 110.744) (width 0.25) (layer F.Cu) (net 31)) (segment (start 156.972 110.744) (end 156.972 100.076) (width 0.25) (layer F.Cu) (net 31)) (segment (start 170.133725 117.50701) (end 167.79901 117.50701) (width 0.25) (layer F.Cu) (net 32)) (segment (start 177.8 118.832) (end 171.458715 118.832) (width 0.25) (layer F.Cu) (net 32)) (segment (start 171.458715 118.832) (end 170.133725 117.50701) (width 0.25) (layer F.Cu) (net 32)) (via (at 162.052 100.076) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 32)) (segment (start 167.79901 117.50701) (end 162.052 111.76) (width 0.25) (layer F.Cu) (net 32)) (segment (start 162.052 111.76) (end 162.052 100.076) (width 0.25) (layer F.Cu) (net 32)) (segment (start 184.703 118.832) (end 180.679 114.808) (width 0.25) (layer F.Cu) (net 33)) (segment (start 185.928 118.832) (end 184.703 118.832) (width 0.25) (layer F.Cu) (net 33)) (segment (start 180.679 114.808) (end 166.624 114.808) (width 0.25) (layer F.Cu) (net 33)) (via (at 164.592 100.076) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 33)) (segment (start 166.624 114.808) (end 164.592 112.776) (width 0.25) (layer F.Cu) (net 33)) (segment (start 164.592 112.776) (end 164.592 100.076) (width 0.25) (layer F.Cu) (net 33)) (via (at 167.132 100.076) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 34)) (segment (start 192.831 118.832) (end 191.65599 117.65699) (width 0.25) (layer F.Cu) (net 34)) (segment (start 167.64 114.3) (end 167.132 113.792) (width 0.25) (layer F.Cu) (net 34)) (segment (start 191.65599 117.65699) (end 184.20499 117.65699) (width 0.25) (layer F.Cu) (net 34)) (segment (start 167.132 113.792) (end 167.132 100.076) (width 0.25) (layer F.Cu) (net 34)) (segment (start 194.056 118.832) (end 192.831 118.832) (width 0.25) (layer F.Cu) (net 34)) (segment (start 184.20499 117.65699) (end 180.848 114.3) (width 0.25) (layer F.Cu) (net 34)) (segment (start 180.848 114.3) (end 167.64 114.3) (width 0.25) (layer F.Cu) (net 34)) (segment (start 200.959 118.832) (end 195.919 113.792) (width 0.25) (layer F.Cu) (net 35)) (segment (start 202.184 118.832) (end 200.959 118.832) (width 0.25) (layer F.Cu) (net 35)) (segment (start 195.919 113.792) (end 170.18 113.792) (width 0.25) (layer F.Cu) (net 35)) (segment (start 170.18 113.792) (end 169.672 113.284) (width 0.25) (layer F.Cu) (net 35)) (via (at 169.672 100.076) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 35)) (segment (start 169.672 113.284) (end 169.672 100.076) (width 0.25) (layer F.Cu) (net 35)) (segment (start 189.659 126.524) (end 190.134 126.524) (width 0.25) (layer F.Cu) (net 40)) (segment (start 189.32149 126.18649) (end 189.659 126.524) (width 0.25) (layer F.Cu) (net 40)) (segment (start 187.478516 126.18649) (end 189.32149 126.18649) (width 0.25) (layer F.Cu) (net 40)) (segment (start 187.427516 126.23749) (end 187.478516 126.18649) (width 0.25) (layer F.Cu) (net 40)) (segment (start 185.72449 126.23749) (end 187.427516 126.23749) (width 0.25) (layer F.Cu) (net 40)) (segment (start 184.912 125.425) (end 185.72449 126.23749) (width 0.25) (layer F.Cu) (net 40)) (segment (start 176.343 125.425) (end 175.768 125.425) (width 0.25) (layer F.Cu) (net 40)) (segment (start 180.515 127.032) (end 178.908 125.425) (width 0.25) (layer F.Cu) (net 40)) (segment (start 178.908 125.425) (end 176.343 125.425) (width 0.25) (layer F.Cu) (net 40)) (segment (start 180.99 127.032) (end 180.515 127.032) (width 0.25) (layer F.Cu) (net 40)) (segment (start 181.316 131.104) (end 183.388 129.032) (width 0.25) (layer F.Cu) (net 43)) (segment (start 181.316 133.604) (end 181.316 131.104) (width 0.25) (layer F.Cu) (net 43)) (segment (start 187.96 131.104) (end 190.46 133.604) (width 0.25) (layer F.Cu) (net 44)) (segment (start 187.96 128.524) (end 187.96 131.104) (width 0.25) (layer F.Cu) (net 44)) (segment (start 195.58 129.375) (end 195.58 129.0615) (width 0.25) (layer F.Cu) (net 45)) (segment (start 199.684 133.479) (end 195.58 129.375) (width 0.25) (layer F.Cu) (net 45)) (segment (start 195.58 129.0615) (end 195.58 128.524) (width 0.25) (layer F.Cu) (net 45)) (segment (start 199.684 133.604) (end 199.684 133.479) (width 0.25) (layer F.Cu) (net 45)) (segment (start 194.056 128.473) (end 195.58 126.949) (width 0.25) (layer F.Cu) (net 66)) (segment (start 194.056 128.524) (end 194.056 128.473) (width 0.25) (layer F.Cu) (net 66)) (segment (start 196.155 126.949) (end 195.58 126.949) (width 0.25) (layer F.Cu) (net 66)) (segment (start 196.32 126.949) (end 196.155 126.949) (width 0.25) (layer F.Cu) (net 66)) (segment (start 198.262 128.891) (end 196.32 126.949) (width 0.25) (layer F.Cu) (net 66)) (segment (start 198.262 129.016) (end 198.262 128.891) (width 0.25) (layer F.Cu) (net 66)) (segment (start 183.388 127.457) (end 183.215 127.457) (width 0.25) (layer F.Cu) (net 67)) (segment (start 177.851 128.016) (end 182.656 128.016) (width 0.25) (layer F.Cu) (net 67)) (segment (start 183.215 127.457) (end 182.656 128.016) (width 0.25) (layer F.Cu) (net 67)) (segment (start 177.343 128.524) (end 177.851 128.016) (width 0.25) (layer F.Cu) (net 67)) (segment (start 182.656 128.016) (end 181.64 129.032) (width 0.25) (layer F.Cu) (net 67)) (segment (start 187.96 127.051) (end 186.487 128.524) (width 0.25) (layer F.Cu) (net 68)) (segment (start 187.96 126.949) (end 187.96 127.051) (width 0.25) (layer F.Cu) (net 68)) (segment (start 190.784 128.399) (end 190.784 128.524) (width 0.25) (layer F.Cu) (net 68)) (segment (start 189.334 126.949) (end 190.784 128.399) (width 0.25) (layer F.Cu) (net 68)) (segment (start 187.96 126.949) (end 189.334 126.949) (width 0.25) (layer F.Cu) (net 68)) )