#
# *********************************************************************************************************
#       this file is configuration for each factory remote device
#
# 	work_mode	  0 :software mode  1 :hardware mode
#	repeat_enable	  0 :disable repeat 1 :enable repeat
#
#	factory_code      each device has it's unique factory code.
#			  pattern:custom_code(16bit)+index_code(16bit)
#			  examble: 0xff000001 = 0xff00(custom cod)  0001 (index)
#
#	release_delay	  unit:ms.release will report from kernel to user layer after this period of time
#			  from press or repeat triggered.
#
#	debug_enable      0 :debug disable  1 :debug disable
#
# SW MODE:
#
#	bit_count	  how many bits in each frame
#	tw_leader_act	  time window for leader active
#	tw_bit0		  time window for bit0 time.
#	tw_bit1		  time window for bit1 time
#	tw_repeat_leader  time window for repeat leader
#
# REG
#
#	reg_base_gen	  set value for PREG_IR_DEC_BASE_GEN
#	reg_control	  set value for PREG_IR_DEC_CONTROL
#	reg_leader_act	  set value for PREG_IR_DEC_LEADER_ACTIVE
#	reg_leader_idle	  set value for PREG_IR_DEC_LEADER_IDLE
#	reg_repeat_leader set value for PREG_IR_DEC_REPEAT_IDLE
#	reg_bit0_time	  set value for PREG_IR_DEC_BIT0_TIME
#
# *********************************************************************************************************
#
# amlogic NEC remote * for original Ugoos UR-01 remote
#   
factory_code    = 0xff000001

work_mode       = 0
repeat_enable   = 1
repeat_delay    = 130
repeat_peroid   = 120
release_delay   = 20
debug_enable    = 1

key_begin

    0x14 116 # KEY_POWER

    0x58 114 # KEY_VOLUMEDOWN
    0x0b 115 # KEY-VOLUMEUP

    0x03 103 # KEY_UP
    0x02 108 # KEY_DOWN
    0x0e 105 # KEY_LEFT
    0x1a 106 # KEY_RIGHT
    0x07 97  # KEY_ENTER

    0x48 102 # KEY_HOME
    0x13 125 # KEY_MENU
    0x01 1   # KEY_BACK

key_end

repeat_key_begin

    0x58 114 # KEY_VOLUMEDOWN
    0x0b 115 # KEY-VOLUMEUP

    0x03 103 # KEY_UP
    0x02 108 # KEY_DOWN
    0x0e 105 # KEY_LEFT
    0x1a 106 # KEY_RIGHT

repeat_key_end