/**
 *  HomeSeer HS-WS100+
 *
 *  Copyright 2016, 2017 DarwinsDen.com
 *
 *  For button mappings, device parameter information and images, questions or to provide feedback on this device handler, 
 *  please visit: 
 *
 *      darwinsden.com/homeseer100plus/
 *
 *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
 *  in compliance with the License. You may obtain a copy of the License at:
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
 *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
 *  for the specific language governing permissions and limitations under the License.
 *
 *	Author: Darwin@DarwinsDen.com
 *	Date: 2016-04-08
 *
 *
 *	Changelog:
 *
 *  1.05 (03/29/2021) - Update to support new button values (Tim Grimley)
 *  1.04 (08/13/2020) - Merge pull request from mikerossman for updates to better support new SmartThings app
 *  1.03 (11/14/2017) - Turn off firmware event log, correct physical button setting for some presses, remove 100ms delay in instant status
 *  1.02 (06/25/2017) - Pulled in @stephack's changes to include button 7/8 events when triggered remotely
 *  1.01 (01/16/2017) - Corrected advertised number of buttons (8)
 *  1.00 (01/14/2017) - Added button 7 (single tap up) and button 8 (single tap down). Added firmware version display.
 *  0.12 (06/03/2016) - Added press type indicator to display last tap/hold press status
 *  0.11 (05/28/2016) - Set numberOfButtons attribute for ease of use with CoRE and other SmartApps. Corrected physical/digital states.
 *	0.10 (04/08/2016) -	Initial 0.1 Beta
 *
 *
 *   Button Mappings  NOTE - THIS IS A BREAKING CHANGE from any other DTH and uses a single button.  
 *                    ALL prior automations will need to be re-programmed or updated when updating this DTH from other versions:
 *
 *   ACTION             BUTTON#    BUTTON ACTION
 *   Single-Tap Up        1        up
 *   Single-Tap Down      1        down  
 *   Double-Tap Up        1        up_2x
 *   Double-Tap Down      1        down_2x  
 *   Triple-Tap Up        1        up_3x
 *   Triple-Tap Down      1        down_3x
 *   Hold Up              1        up_hold
 *   Hold Down            1        down_hold
 */

import groovy.transform.Field
import groovy.json.JsonOutput

metadata {
	definition (name: "WS100 Switch", namespace: "darwinsden", author: "darwin@darwinsden.com") {
		capability "Actuator"
		capability "Indicator"
		capability "Switch"
        capability "Button"
		capability "Polling"
		capability "Refresh"
		capability "Sensor"
        capability "Configuration"
        capability "Health Check"
        
        command "tapUp2"
        command "tapDown2"
        command "tapUp3"
        command "tapDown3"
        command "holdUp"
        command "holdDown"
        
        fingerprint mfr: "000C", prod: "4447", model: "3033"
        // fingerprint deviceId: "0x1001", inClusters: "0x5E, 0x86, 0x72, 0x5A, 0x85, 0x59, 0x73, 0x25, 0x27, 0x70, 0x2C, 0x2B, 0x5B, 0x7A", outClusters: "0x5B"
}

	// simulator metadata
	simulator {
		status "on":  "command: 2003, payload: FF"
		status "off": "command: 2003, payload: 00"

		// reply messages
		reply "2001FF,delay 100,2502": "command: 2503, payload: FF"
		reply "200100,delay 100,2502": "command: 2503, payload: 00"
	}
preferences {      
       input "forceupdate", "bool", title: "Force Settings Update/Refresh?", description: "Toggle to force settings update", requied: false
    }

	tiles(scale: 2) {
		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
				attributeState "on", label: '${name}', action: "switch.off", icon: "st.Home.home30", backgroundColor: "#79b821"
				attributeState "off", label: '${name}', action: "switch.on", icon: "st.Home.home30", backgroundColor: "#ffffff"
			}
            tileAttribute("device.status", key: "SECONDARY_CONTROL") {
                attributeState("default", label:'${currentValue}', unit:"")
            }
		}
        
        standardTile("tapUp2", "device.button", width: 2, height: 2, decoration: "flat") {
			state "default", label: "Tap Up x2", backgroundColor: "#ffffff", action: "tapUp2", icon: "st.Home.home30"
		}     
 
        standardTile("tapDown2", "device.button", width: 2, height: 2, decoration: "flat") {
			state "default", label: "Tap Down x2", backgroundColor: "#ffffff", action: "tapDown2", icon: "st.Home.home30"
		} 

        standardTile("tapUp3", "device.button", width: 2, height: 2, decoration: "flat") {
			state "default", label: "Tap Up x3", backgroundColor: "#ffffff", action: "tapUp3", icon: "st.Home.home30"
		} 

        standardTile("tapDown3", "device.button", width: 2, height: 2, decoration: "flat") {
			state "default", label: "Tap Down x3", backgroundColor: "#ffffff", action: "tapDown3", icon: "st.Home.home30"
		} 

        standardTile("holdUp", "device.button", width: 2, height: 2, decoration: "flat") {
			state "default", label: "Hold Up", backgroundColor: "#ffffff", action: "holdUp", icon: "st.Home.home30"
		} 

        standardTile("holdDown", "device.button", width: 2, height: 2, decoration: "flat") {
			state "default", label: "Hold Down", backgroundColor: "#ffffff", action: "holdDown", icon: "st.Home.home30"
		} 

        standardTile("indicator", "device.indicatorStatus", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
			state "when off", action:"indicator.indicatorWhenOn", icon:"st.indicators.lit-when-off"
			state "when on", action:"indicator.indicatorNever", icon:"st.indicators.lit-when-on"
			state "never", action:"indicator.indicatorWhenOff", icon:"st.indicators.never-lit"
		}
 
		standardTile("refresh", "device.switch", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
		}

        valueTile("firmwareVersion", "device.firmwareVersion", width:2, height: 2, decoration: "flat", inactiveLabel: false) {
			state "default", label: '${currentValue}'
		}
        
		main "switch"
		details(["switch","tapUp2","tapUp3","holdUp","tapDown2","tapDown3","holdDown","indicator","firmwareVersion","refresh"])
	}
}

def parse(String description) {
	def result = null
	def cmd = zwave.parse(description, [0x20: 1, 0x70: 1])
	
    if (cmd) {
		result = zwaveEvent(cmd)
	}
    if (!result){
        log.debug "Parse returned ${result} for command ${cmd}"
    }
    else {
		log.debug "Parse returned ${result}"
    }   
	return result
}

def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
	createEvent([name: "switch", value: cmd.value ? "on" : "off", type: "physical"])
}

def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
	createEvent([name: "switch", value: cmd.value ? "on" : "off", type: "physical"])
}

def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd) {
	createEvent([name: "switch", value: cmd.value ? "on" : "off", type: "digital"])
}

def zwaveEvent(physicalgraph.zwave.commands.configurationv1.ConfigurationReport cmd) {
	def value = "when off"
	if (cmd.configurationValue[0] == 1) {value = "when on"}
	if (cmd.configurationValue[0] == 2) {value = "never"}
	createEvent([name: "indicatorStatus", value: value, display: false])
}

def zwaveEvent(physicalgraph.zwave.commands.hailv1.Hail cmd) {
	createEvent([name: "hail", value: "hail", descriptionText: "Switch button was pressed", displayed: false])
}

def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
	log.debug "manufacturerId:   ${cmd.manufacturerId}"
	log.debug "manufacturerName: ${cmd.manufacturerName}"
    state.manufacturer=cmd.manufacturerName
	log.debug "productId:        ${cmd.productId}"
	log.debug "productTypeId:    ${cmd.productTypeId}"
	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
	updateDataValue("MSR", msr)	
    setFirmwareVersion()
    createEvent([descriptionText: "$device.displayName MSR: $msr", isStateChange: false])
}

def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {	
    log.debug ("received Version Report")
    log.debug "applicationVersion:      ${cmd.applicationVersion}"
    log.debug "applicationSubVersion:   ${cmd.applicationSubVersion}"
    state.firmwareVersion=cmd.applicationVersion+'.'+cmd.applicationSubVersion
    log.debug "zWaveLibraryType:        ${cmd.zWaveLibraryType}"
    log.debug "zWaveProtocolVersion:    ${cmd.zWaveProtocolVersion}"
    log.debug "zWaveProtocolSubVersion: ${cmd.zWaveProtocolSubVersion}"
    setFirmwareVersion()
    createEvent([descriptionText: "Firmware V"+state.firmwareVersion, isStateChange: false])
}

def zwaveEvent(physicalgraph.zwave.Command cmd) {
	// Handles all Z-Wave commands we aren't interested in
    log.debug (cmd)
	createEvent([:])
}

def on() {
	sendEvent(tapUp1Response("digital"))
	delayBetween([
		zwave.basicV1.basicSet(value: 0xFF).format(),
		zwave.switchBinaryV1.switchBinaryGet().format()
	])
}

def off() {
	sendEvent(tapDown1Response("digital"))
	delayBetween([
		zwave.basicV1.basicSet(value: 0x00).format(),
		zwave.switchBinaryV1.switchBinaryGet().format()
	])
}

def poll() {
	delayBetween([
		zwave.switchBinaryV1.switchBinaryGet().format(),
		zwave.manufacturerSpecificV1.manufacturerSpecificGet().format()
	])
}

def setFirmwareVersion() {
   def versionInfo = ''
   if (state.manufacturer)
   {
      versionInfo=state.manufacturer+' '
   }
   if (state.firmwareVersion)
   {
      versionInfo=versionInfo+"Firmware V"+state.firmwareVersion
   }
   else 
   {
     versionInfo=versionInfo+"Firmware unknown"
   }   
   sendEvent(name: "firmwareVersion",  value: versionInfo, isStateChange: true, displayed: false)
}

def indicatorWhenOn() {
	sendEvent(name: "indicatorStatus", value: "when on", display: false)
	zwave.configurationV1.configurationSet(configurationValue: [1], parameterNumber: 3, size: 1).format()
}

def indicatorWhenOff() {
	sendEvent(name: "indicatorStatus", value: "when off", display: false)
	zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 3, size: 1).format()
}

def indicatorNever() {
	sendEvent(name: "indicatorStatus", value: "never", display: false)
	zwave.configurationV1.configurationSet(configurationValue: [2], parameterNumber: 3, size: 1).format()
}

def invertSwitch(invert=true) {
	if (invert) {
		zwave.configurationV1.configurationSet(configurationValue: [1], parameterNumber: 4, size: 1).format()
	}
	else {
		zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 4, size: 1).format()
	}
}

def zwaveEvent(physicalgraph.zwave.commands.centralscenev1.CentralSceneNotification cmd) {
    log.debug("sceneNumber: ${cmd.sceneNumber} keyAttributes: ${cmd.keyAttributes}")
    def result = []
    
    switch (cmd.sceneNumber) {
      case 1:
          // Up
          switch (cmd.keyAttributes) {
              case 0:
                  // Press Once
                  result += createEvent(tapUp1Response("physical"))  
                  result += createEvent([name: "switch", value: "on", type: "physical"])
                  break
 
              case 1:
                  result=createEvent([name: "switch", value: "on", type: "physical"])
                  break
              case 2:
                  // Hold
                  result += createEvent(holdUpResponse("physical"))  
                  result += createEvent([name: "switch", value: "on", type: "physical"])    

                  break
              case 3: 
                  // 2 Times
                  result=createEvent(tapUp2Response("physical"))
                  break
              case 4:
                  // 3 Three times
                  result=createEvent(tapUp3Response("physical"))
                  break
              default:
                  log.debug ("unexpected up press keyAttribute: $cmd.keyAttributes")
          }
          break
          
      case 2:
          // Down
          switch (cmd.keyAttributes) {
              case 0:
                  // Press Once
                  result += createEvent(tapDown1Response("physical"))
                  result += createEvent([name: "switch", value: "off", type: "physical"]) 
                  break
              case 1:
                  result=createEvent([name: "switch", value: "off", type: "physical"])
                  break
              case 2:
                  // Hold
                  result += createEvent(holdDownResponse("physical"))
                  result += createEvent([name: "switch", value: "off", type: "physical"]) 
                  break
              case 3: 
                  // 2 Times
                  result=createEvent(tapDown2Response("physical"))
                  break
              case 4:
                  // 3 Times
                  result=createEvent(tapDown3Response("physical"))
                  break
              default:
                  log.debug ("unexpected down press keyAttribute: $cmd.keyAttributes")
           } 
           break
           
      default:
           // unexpected case
           log.debug ("unexpected scene: $cmd.sceneNumber")
   }  
   return result
}

def tapUp1Response(String buttonType) {
    sendEvent(name: "status" , value: "Tap ▲")
	[name: "button", value: "up", data: [buttonNumber: "1"], descriptionText: "$device.displayName Tap-Up-1 pressed", 
       isStateChange: true, type: "$buttonType"]
}

def tapDown1Response(String buttonType) {
    sendEvent(name: "status" , value: "Tap ▼")
	[name: "button", value: "down", data: [buttonNumber: "1"], descriptionText: "$device.displayName Tap-Down-1 pressed", 
      isStateChange: true, type: "$buttonType"]
}

def tapUp2Response(String buttonType) {
    sendEvent(name: "status" , value: "Tap ▲▲")
	[name: "button", value: "up_2x", data: [buttonNumber: "1"], descriptionText: "$device.displayName Tap-Up-2 pressed", 
       isStateChange: true, type: "$buttonType"]
}

def tapDown2Response(String buttonType) {
    sendEvent(name: "status" , value: "Tap ▼▼")
	[name: "button", value: "down_2x", data: [buttonNumber: "1"], descriptionText: "$device.displayName Tap-Down-2 pressed", 
      isStateChange: true, type: "$buttonType"]
}

def tapUp3Response(String buttonType) {
    sendEvent(name: "status" , value: "Tap ▲▲▲")
	[name: "button", value: "up_3x", data: [buttonNumber: "1"], descriptionText: "$device.displayName Tap-Up-3 pressed", 
    isStateChange: true, type: "$buttonType"]
}

def tapDown3Response(String buttonType) {
    sendEvent(name: "status" , value: "Tap ▼▼▼")
	[name: "button", value: "down_3x", data: [buttonNumber: "1"], descriptionText: "$device.displayName Tap-Down-3 pressed", 
    isStateChange: true, type: "$buttonType"]
}

def holdUpResponse(String buttonType) {
    sendEvent(name: "status" , value: "Hold ▲")
	[name: "button", value: "up_hold", data: [buttonNumber: "1"], descriptionText: "$device.displayName Hold-Up pressed", 
    isStateChange: true, type: "$buttonType"]
}

def holdDownResponse(String buttonType) {
    sendEvent(name: "status" , value: "Hold ▼")
	[name: "button", value: "down_hold", data: [buttonNumber: "1"], descriptionText: "$device.displayName Hold-Down pressed", 
    isStateChange: true, type: "$buttonType"]
}

def tapUp2() {
	sendEvent(tapUp2Response("digital"))
}

def tapDown2() {
	sendEvent(tapDown2Response("digital"))
}

def tapUp3() {
	sendEvent(tapUp3Response("digital"))
}

def tapDown3() {
	sendEvent(tapDown3Response("digital"))
}

def holdUp() {
	sendEvent(holdUpResponse("digital"))
}

def holdDown() {
	sendEvent(holdDownResponse("digital"))
} 

def configure() {
   sendEvent(name: "numberOfButtons", value: 1, displayed: false)
   sendEvent(name: "supportedButtonValues", value:JsonOutput.toJson(["up","down","up_hold","down_hold","up_2x","down_2x","up_3x","down_3x"]), displayed:false)
  
    def commands = []
    commands << zwave.manufacturerSpecificV1.manufacturerSpecificGet().format()
    commands << zwave.versionV1.versionGet().format()
    commands << zwave.switchBinaryV1.switchBinaryGet().format()
    delayBetween(commands,500)
    
    log.debug "---Configure Called--- ${device.displayName} sent ${commands}"
}


def refresh() {
    configure()
}

def updated() {
	configure()
}

def initialize() {
	configure()
}