---
name: consistency-check
description: "Scan GDDs against the entity registry for cross-document conflicts. Grep-first approach targets conflicting sections, different stats."
argument-hint: "[full | since-last-review | entity:<name> | item:<name>]"
user-invocable: true
allowed-tools: Read, Glob, Grep, Write, Edit, Bash, AskUserQuestion, Bash(bash "*/.claude/skills/consistency-check/../../hooks/yaml-helper.sh" resolve_config *)
model: sonnet
---

!`bash "${CLAUDE_SKILL_DIR}/../../hooks/yaml-helper.sh" resolve_config --keys automation,workflow,system_overrides`



# Consistency Check

Detects cross-document inconsistencies by comparing all GDDs against the
entity registry (`design/registry/entities.yaml`). Uses a grep-first approach:
reads the registry once, then targets only the GDD sections that mention
registered names — no full document reads unless a conflict needs investigation.

**This skill is the write-time safety net.** It catches what `/design-system`'s
per-section checks may have missed and what `/review-all-gdds`'s holistic review
catches too late.

**When to run:**
- After writing each new GDD (before moving to the next system)
- Before `/review-all-gdds` (so that skill starts with a clean baseline)
- Before `/create-architecture` (inconsistencies poison downstream ADRs)
- On demand: `/consistency-check entity:[name]` to check one entity specifically

**Output:** Conflict report + optional registry corrections

---

Every `AskUserQuestion` call follows `.claude/docs/automation-modes.md`
(collaborative asks always · guided major-only · autonomous logs and proceeds;
`automation_always_ask` categories always prompt).

**`workflow`** (see `.claude/docs/workflow-modes.md`), applied per GDD at its
**effective** tier — the `system_overrides` row for that GDD's system (its
filename stem) when the block lists one, else the project value:
- `full` — full entity-registry cross-check against all GDD sections.
- `standard` — cross-check against the required sections only. The report's
  Scope line says so, and each value stated for a registered name outside those
  sections is listed as not checked at this tier (Phase 3 applies this).
- `minimal` — not meaningful (no GDDs to check).

## Phase 1: Parse Arguments and Load Registry

**Modes:**
- No argument / `full` — check all registered entries against all GDDs
- `since-last-review` — check only GDDs modified since the last review report
- `entity:<name>` — check one specific entity across all GDDs
- `item:<name>` — check one specific item across all GDDs

**Load the registry:**

```
Read path="design/registry/entities.yaml"
```

If the file does not exist or has no entries:
> "Entity registry is empty. Run `/design-system` to write GDDs — the registry
> is populated automatically after each GDD is completed. Nothing to check yet."

Verdict: **NOT ASSESSED — entity registry empty**. Stop: nothing was compared,
so there is no PASS to give and nothing to write.

Build four lookup tables from the registry:
- **entity_map**: `{ name → { source, attributes, referenced_by } }`
- **item_map**: `{ name → { source, value_gold, weight, ... } }`
- **formula_map**: `{ name → { source, variables, output_range } }`
- **constant_map**: `{ name → { source, value, unit } }`

Count total registered entries. Report:
```
Registry loaded: [N] entities, [N] items, [N] formulas, [N] constants
Scope: [full | since-last-review | entity:name]
```

For `entity:<name>` or `item:<name>`, if the registry has no entry by that name
the verdict is **NOT ASSESSED — `<name>` is not in the registry**: list the
closest registered names and stop. Checking an unregistered name compares
nothing, and that is not a PASS.

---

## Phase 2: Locate In-Scope GDDs

```
Glob pattern="design/gdd/*.md"
```

Exclude the docs that live in `design/gdd/` but are not system GDDs:
`game-concept.md`, `systems-index.md`, `game-pillars.md`, `gameplay-tags.md`,
`entity-registry.md`, `fixture-swap-ledger.md`, `sound-bible.md` and any
`gdd-cross-review-*.md` (the report `/review-all-gdds` writes here).

For `since-last-review` mode:
```bash
git log --name-only --pretty=format: -- design/gdd/ | grep "\.md$" | sort -u
```
Limit to GDDs modified since the most recent `design/gdd/gdd-cross-review-*.md`
file's creation date.

Report the in-scope GDD list before scanning. **If the list is empty** — no system
GDDs exist, or `since-last-review` found none changed — the verdict is
**NOT ASSESSED — no GDDs in scope**: say which filter produced zero, and stop.
A scan of nothing finds no conflicts, and that is not a PASS.

---

## Phase 3: Grep-First Conflict Scan

For each registered entry, grep every in-scope GDD for the entry's name.
Do NOT do full reads — extract only the matching lines and their immediate
context (-C 3 lines).

This is the core optimization: instead of reading 10 GDDs × 400 lines each
(4,000 lines), you grep 50 entity names × 10 GDDs (50 targeted searches,
each returning ~10 lines on a hit).

**In a GDD whose effective tier is `standard`, compare only hits under a
required section.** The effective tier is per GDD: `system_overrides.<stem>`
replaces the project tier for that GDD in either direction (a `full` row makes
every section compared). Grep each such GDD once for `^## ` to get its headings
and line numbers, and file every name hit under the nearest heading above it:
only hits under Overview, Detailed Rules / Detailed Design, Formulas, Edge
Cases, Dependencies or Acceptance Criteria are compared — plus Tuning Knobs when
`project.yaml` sets `workflow_overrides.tuning_knobs: true` (read that flag
once; it only ever adds the section). Any other hit (Tuning Knobs without the
flag, Player Fantasy, any other section) raises no finding and is not logged;
list each one that states a value (name, GDD, section) on the report's
`Not checked at this tier` line.

### 3a: Entity Scan

For each entity in entity_map:

```
Grep pattern="[entity_name]" glob="design/gdd/*.md" output_mode="content" -C 3
```

For each GDD hit, extract the values mentioned near the entity name:
- any numeric attributes (counts, costs, durations, ranges, rates)
- any categorical attributes (types, tiers, categories)
- any derived values (totals, outputs, results)
- any other attributes registered in entity_map

Compare extracted values against the registry entry.

**Conflict detection:**
- Registry says `[entity_name].[attribute] = [value_A]`. GDD says `[entity_name] has [value_B]`. → **CONFLICT**
- Registry says `[item_name].[attribute] = [value_A]`. GDD says `[item_name] is [value_B]`. → **CONFLICT**
- GDD mentions `[entity_name]` but doesn't specify the attribute. → **NOTE** (no conflict, just unverifiable)

### 3b: Item Scan

For each item in item_map, grep all GDDs for the item name. Extract:
- sell price / value / gold value
- weight
- stack rules (stackable / non-stackable)
- category

Compare against registry entry values.

### 3c: Formula Scan

For each formula in formula_map, grep all GDDs for the formula name. Extract:
- variable names mentioned near the formula
- output range or cap values mentioned

Compare against registry entry:
- Different variable names → **CONFLICT**
- Output range stated differently → **CONFLICT**

### 3d: Constant Scan

For each constant in constant_map, grep all GDDs for the constant name. Extract:
- Any numeric value mentioned near the constant name

Compare against registry value:
- Different number → **CONFLICT**

---

## Phase 4: Deep Investigation (Conflicts Only)

For each conflict found in Phase 3, do a targeted full-section read of the
conflicting GDD to get precise context:

```
Read path="design/gdd/[conflicting_gdd].md"
```
(Or use Grep with wider context if the file is large)

Confirm the conflict with full context. Determine:
1. **Which GDD is correct?** Check the `source:` field in the registry — the
   source GDD is the authoritative owner. Any other GDD that contradicts it
   is the one that needs updating.
2. **Is the registry itself out of date?** If the source GDD was updated after
   the registry entry was written (check git log), the registry may be stale.
3. **Is this a genuine design change?** If the conflict represents an intentional
   design decision, the resolution is: update the source GDD, update the registry,
   then fix all other GDDs.

For each conflict, classify:
- **🔴 CONFLICT** — same named entity/item/formula/constant with different values
  in different GDDs. Must resolve before architecture begins.
- **⚠️ STALE REGISTRY** — source GDD value changed but registry not updated.
  Registry needs updating; other GDDs may be correct already.
- **ℹ️ UNVERIFIABLE** — entity mentioned but no comparable attribute stated.
  Not a conflict; just noting the reference.

---

## Phase 5: Output Report

```
## Consistency Check Report
Date: [date]
Registry entries checked: [N entities, N items, N formulas, N constants]
GDDs scanned: [N] ([list names])
Scope: [all GDD sections | required sections only — workflow: standard | per GDD — name each GDD whose effective tier differs, and its tier]
Not checked at this tier: [each value stated outside the required sections (name, GDD, section) — or "none"; omit when every GDD is at `full`]

---

### Conflicts Found (must resolve before architecture)

🔴 [Entity/Item/Formula/Constant Name]
   Registry (source: [gdd]): [attribute] = [value]
   Conflict in [other_gdd].md: [attribute] = [different_value]
   → Resolution needed: [which doc to change and to what]

---

### Stale Registry Entries (registry behind the GDD)

⚠️ [Entry Name]
   Registry says: [value] (written [date])
   Source GDD now says: [new value]
   → Update registry entry to match source GDD, then check referenced_by docs.

---

### Unverifiable References (no conflict, informational)

ℹ️ [gdd].md mentions [entity_name] but states no comparable attributes.
   No conflict detected. No action required.

---

### Clean Entries (no issues found)

✅ [N] registry entries verified across all GDDs with no conflicts.

---

Verdict: PASS | CONFLICTS FOUND | NOT ASSESSED
```

**Verdict:**
- **CONFLICTS FOUND** — one or more conflicts detected. List resolution steps.
- **NOT ASSESSED** — nothing was compared: the entity registry is empty or the
  named entity is not in it (Phase 1), or no GDDs were in scope (Phase 2). Say
  which.
- **PASS** — no conflicts. Registry and GDDs agree on all checked values, across at least one GDD.

---

## Phase 6: Registry Corrections

**Re-read before you write.** Phase 1 read the registry before the scans, and
another skill or session may have changed it since. Before each Edit, read the
current `design/registry/entities.yaml`, find the entry in its section, and
anchor the Edit on the entry's current text, never on what Phase 1 saw. Append
a new entry after the last existing entry of its section.

If stale registry entries were found, ask:
> "May I update `design/registry/entities.yaml` to fix the [N] stale entries?"

For each stale entry:
- Update the `value` / attribute field
- Set `revised:` to today's date
- Add a YAML comment with the old value: `# was: [old_value] before [date]`

If new entries were found in GDDs that are not in the registry, ask:
> "Found [N] entities/items mentioned in GDDs that aren't in the registry yet.
> May I add them to `design/registry/entities.yaml`?"

Only add entries that appear in more than one GDD (true cross-system facts).

**Never delete registry entries.** Set `status: deprecated` if an entry is removed
from all GDDs.

After writing: Verdict: **COMPLETE** — consistency check finished.
If conflicts remain unresolved: Verdict: **BLOCKED** — [N] conflicts need manual resolution before architecture begins.

### 6b: Append to Reflexion Log

If any 🔴 CONFLICT entries were found (regardless of whether they were resolved),
ask: "May I append [N] entries to `docs/consistency-failures.md` (creating it if
absent)?" On yes, append an entry for each conflict; on no, say the conflicts
were not logged.

```markdown
### [YYYY-MM-DD] — /consistency-check — 🔴 CONFLICT
**Domain**: [system domain(s) involved]
**Documents involved**: [source GDD] vs [conflicting GDD]
**What happened**: [specific conflict — entity name, attribute, differing values]
**Resolution**: [how it was fixed, or "Unresolved — manual action needed"]
**Pattern**: [generalised lesson, e.g. "Item values defined in combat GDD were not
referenced in economy GDD before authoring — always check entities.yaml first"]
```

If `docs/consistency-failures.md` does not exist, create it with this header before appending:

```markdown
# Consistency Failure Log

<!-- Auto-maintained by /consistency-check. Do not edit manually. -->
<!-- One entry per detected conflict, in chronological order. -->

| Date | GDD A | GDD B | Conflict Type | Status |
|------|-------|-------|---------------|--------|
```

Then append the new conflict entries. Never skip logging on your own — a missing file is not a reason to lose conflict history; only the user's "no" is.

---

## Phase 7: Session State and Closing

Silently append to `production/session-state/active.md` (create the file if it does not exist):

```
<!-- CONSISTENCY-CHECK: [date] | GDDs checked: [N] | Conflicts found: [N] | Log: docs/consistency-failures.md -->
```

> **Point at `docs/consistency-failures.md` — the file Phase 6 actually appends
> to.** A breadcrumb is a pointer left for a future session to follow. One that
> names a file nothing writes sends that session looking for conflict history it
> will never find, and nothing errors along the way. Never invent a report
> filename here.

Then close with an `AskUserQuestion` widget:

- **Prompt**: "Consistency check complete — [N] conflicts found. What next?"
- **Options**:
  - `[A] Fix the highest-priority conflict now`
  - `[B] Run /design-review on the most conflicted GDD`
  - `[C] Stop here`

In collaborative and guided modes, never end the skill with plain text — always
close with this widget. In autonomous mode, print the findings and recommended
next step, then record via `log_decision` (no widget).

---

## Recovery / Reference

- **If PASS**: Run `/review-all-gdds` for holistic design-theory review, or
  `/create-architecture` if all MVP GDDs are complete.
- **If CONFLICTS FOUND**: Fix the flagged GDDs, then re-run
  `/consistency-check` to confirm resolution.
- **If STALE REGISTRY**: Update the registry (Phase 6), then re-run to verify.
- Run `/consistency-check` after writing each new GDD to catch issues early,
  not at architecture time.