{ "name": "ssid.ai router default-credential dataset", "description": "Default login IP, username, password (or an explicit reason there is none), credential type, and factory-reset steps for consumer routers, gateways, mesh systems and access points. Every row cites the manufacturer's own documentation.", "source": "https://ssid.ai/routers", "license": "CC-BY-4.0", "license_url": "https://creativecommons.org/licenses/by/4.0/", "attribution": "ssid.ai router default-credential directory (https://ssid.ai/routers)", "generated_at": "2026-08-10", "model_count": 312, "routers": [ { "slug": "actiontec-mi424wr", "brand": "Actiontec", "model": "MI424WR (Verizon FiOS)", "category": "gateway", "default_gateway_ip": "192.168.1.1", "default_login_host": null, "default_username": "admin", "default_password": "password", "default_password_blank": false, "credential_type": "static", "credential_note": "Verizon's official Actiontec manual documents the default login as admin / password, after which the router forces you to choose your own credentials. Be aware later revisions (rev C/D and many field-installed FiOS units) instead use a unique password derived from the serial number and printed on the device label.", "reset_steps": "Open a browser to http://192.168.1.1 and log in with admin / password; the router then prompts you to set your own username and password. If that fails, press and hold the Reset button on the back for about 10-15 seconds until it reboots. Note: many FiOS units use a unique password printed on the label instead — check the sticker if admin/password is rejected.", "source_url": "https://www.verizon.com/content/dam/verizon/support/consumer/documents/actiontecr1408usermanual.pdf", "source_name": "Verizon Actiontec Router User Manual (official PDF)", "source_archive_url": "https://web.archive.org/web/20260729070801/https://www.verizon.com/content/dam/verizon/support/consumer/documents/actiontecr1408usermanual.pdf", "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/actiontec-mi424wr" }, { "slug": "airtel-xstream-fiber", "brand": "Airtel", "model": "Xstream Fiber Router", "category": "gateway", "default_gateway_ip": "192.168.1.1", "default_login_host": null, "default_username": "admin", "default_password": "password", "default_password_blank": false, "credential_type": "static", "credential_note": "Airtel's official support page documents 192.168.1.1 with admin / password as the login. This is a genuinely documented default, not an invented admin/admin. Airtel ships several ODM units (Nokia, ZTE, Syrotech); newer fibre ONTs increasingly carry a unique admin password printed on the device label, so check the sticker if admin/password does not work.", "reset_steps": "Connect to the router over Wi-Fi or by LAN cable, open http://192.168.1.1 in a browser, and sign in with username admin and password password (Airtel's documented default). To factory reset, press and hold the recessed RESET button on the back for about 10-15 seconds until the LEDs blink and the unit reboots, then log back in at 192.168.1.1. If admin/password is rejected, check the sticker on the underside of the unit for a per-device password.", "source_url": "https://www.airtel.in/blog/broadband/use-ip-address-to-login-to-router-settings/", "source_name": "Airtel — Use IP address to login to router settings", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/airtel-xstream-fiber" }, { "slug": "amazon-eero-6", "brand": "Amazon", "model": "eero (eero 6 / mesh)", "category": "mesh", "default_gateway_ip": null, "default_login_host": null, "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "app-only", "credential_note": "App-only: the network cannot be configured through a web browser. Login uses a one-time code by SMS/email (or a linked Amazon account) — no default username, password, or admin IP.", "reset_steps": "Hold the reset button on the back ~15 seconds until the LED flashes red for a full factory reset (erases all network config).", "source_url": "https://support.eero.com/hc/en-us/articles/207599876-Do-I-need-a-password-to-log-into-my-eero-I-think-I-forgot-my-password", "source_name": "eero Help Center — Do I need a password to log in?", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/amazon-eero-6" }, { "slug": "arris-surfboard-s33", "brand": "ARRIS", "model": "SURFboard S33", "category": "gateway", "default_gateway_ip": "192.168.100.1", "default_login_host": null, "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "The password is derived from the device: username admin, password = last 8 digits of the serial number printed on the label, with a forced password change on first login. Some early firmware accepted admin/password. No universal factory default.", "reset_steps": "Open a browser to http://192.168.100.1 to reach the S33 web manager (this is a cable-modem diagnostics/settings page, not a Wi-Fi router). Log in with username 'admin' and the last 8 digits of the serial number on the bottom label, then create a new password when prompted. If locked out, wait 10 minutes after too many failed attempts, or factory reset by holding the recessed Reset button on the back for about 10 seconds; after reset, log in again with admin + last 8 of the serial.", "source_url": "https://arris.my.salesforce-sites.com/consumers/articles/knowledge/S33-Web-Manager-Access", "source_name": "ARRIS SURFboard Support (S33/S34: Web Manager Access)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/arris-surfboard-s33" }, { "slug": "arris-surfboard-sb8200", "brand": "ARRIS", "model": "SURFboard SB8200", "category": "gateway", "default_gateway_ip": "192.168.100.1", "default_login_host": null, "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "Modem, not a router. Older firmware shipped with admin/password, but current firmware uses admin plus the last 8 digits of the serial number (from the label) and forces you to create a new password on first login. There is no universal admin/admin.", "reset_steps": "The SB8200 is a modem only (no Wi-Fi), so 192.168.100.1 is a diagnostics/web-manager page, not a router settings page. To reach it, open a browser to http://192.168.100.1. On current firmware the username is 'admin' and the password is the last 8 characters of the serial number printed on the modem's bottom label; you'll be prompted to set a new password on first login. To factory reset, press and hold the recessed Reset button on the back with a paperclip for about 10 seconds until the modem restarts, which reverts the admin password to the last-8-of-serial default.", "source_url": "https://arris.my.salesforce-sites.com/consumers/articles/knowledge/SB8200-Web-Manager-Access", "source_name": "ARRIS SURFboard Support (SB8200: Web Manager Access)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/arris-surfboard-sb8200" }, { "slug": "arris-surfboard-sbg7600ac2", "brand": "ARRIS", "model": "SURFboard SBG7600AC2", "category": "gateway", "default_gateway_ip": "192.168.0.1", "default_login_host": null, "default_username": "admin", "default_password": "password", "default_password_blank": false, "credential_type": "static", "credential_note": "Documented default is admin / password (case-sensitive); the web UI forces you to change username and password on first login.", "reset_steps": "Hold the recessed reset button on the rear ~15 seconds until the modem restarts to restore factory defaults.", "source_url": "https://www.surfboard.com/support/resources/", "source_name": "ARRIS SURFboard official support (SBG7600AC2 user guide)", "source_archive_url": "https://web.archive.org/web/20260729065407/https://www.surfboard.com/support/resources/", "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/arris-surfboard-sbg7600ac2" }, { "slug": "aruba-instant-on-ap11", "brand": "Aruba (HPE)", "model": "Instant On AP11", "category": "router", "default_gateway_ip": null, "default_login_host": null, "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "app-only", "credential_note": "No universal default credentials. The AP is managed entirely via an Instant On account you create; the account password (not admin/admin) is your login.", "reset_steps": "The Instant On AP11 is configured through the HPE Networking Instant On mobile app (or web app). Install the app, choose 'Create an account', register with your own email and a self-chosen password, verify by email, then let the app find and set up the AP — no built-in admin password exists. To factory reset, with the AP powered on press and hold the Reset button for about 1–15 seconds until the LED signals a reset, then re-onboard it in the app.", "source_url": "https://arubanetworking.hpe.com/techdocs/instanton/3.1.0/HPE-Networking-Instant-On-3.1.0-User-Guide-Web-Application-Version.pdf", "source_name": "HPE Networking Instant On 3.1.0 User Guide", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/aruba-instant-on-ap11" }, { "slug": "aruba-instant-on-ap22", "brand": "Aruba (HPE)", "model": "Instant On AP22", "category": "router", "default_gateway_ip": null, "default_login_host": null, "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "app-only", "credential_note": "No default admin/admin. Access is via an Instant On cloud account you create (your email + your chosen password); the same account manages the AP locally and remotely.", "reset_steps": "The Instant On AP22 is set up through the HPE Networking Instant On mobile app (or the web app at instant-on.hpe.com). Install the app, tap 'Create an account', register with your own email and a password you choose, verify by email, then follow the app to discover and configure the AP — there is no factory admin password. To factory reset, with the AP powered on hold the Reset button for about 1–15 seconds until the LED indicates reset, then re-add it in the app.", "source_url": "https://arubanetworking.hpe.com/techdocs/instanton/3.1.0/HPE-Networking-Instant-On-3.1.0-User-Guide-Web-Application-Version.pdf", "source_name": "HPE Networking Instant On 3.1.0 User Guide", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/aruba-instant-on-ap22" }, { "slug": "asus-rog-rapture-gt-ax11000", "brand": "ASUS", "model": "ROG Rapture GT-AX11000", "category": "router", "default_gateway_ip": "192.168.50.1", "default_login_host": "router.asus.com", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "Gaming router firmware requires setting your own admin password at setup. Login name defaults to 'admin'; there is no fixed default password.", "reset_steps": "The Quick Internet Setup wizard forces you to create your own admin login name and password on first login — no admin/admin default. To factory reset: with the router on, press and hold the RESET button (rear) for 5-10 seconds until the power LED flashes, release, and wait for reboot. Re-run setup at http://router.asus.com (192.168.50.1) and set a new admin password.", "source_url": "https://www.asus.com/us/support/faq/1005263/", "source_name": "ASUS Official Support — How do I enter my ASUS router's setting page using Web GUI?", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/asus-rog-rapture-gt-ax11000" }, { "slug": "asus-rog-rapture-gt-axe16000", "brand": "ASUS", "model": "ROG Rapture GT-AXE16000", "category": "router", "default_gateway_ip": "192.168.50.1", "default_login_host": "router.asus.com", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "The ROG Rapture GT-AXE16000 is a WiFi 6E (AXE16000) flagship, and like every current ASUS it has no factory password: setup forces you to pick one. The account name starts out as admin.", "reset_steps": "Setup on first login compels you to create your own admin login and password — nothing is shipped preset. Factory reset: with the router on, hold the rear RESET button 5-10 seconds until the power LED flashes, release, and let it come back up. Re-run setup at http://router.asus.com (192.168.50.1) and pick a new admin password.", "source_url": "https://www.asus.com/us/support/faq/1005263/", "source_name": "ASUS Official Support — How do I enter my ASUS router's setting page using Web GUI?", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/asus-rog-rapture-gt-axe16000" }, { "slug": "asus-rt-ac66u-b1", "brand": "ASUS", "model": "RT-AC66U B1", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": "router.asus.com", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "Older model with login name 'admin'; early firmware used password 'admin', but current firmware forces you to set your own password on first setup. Don't rely on admin/admin. Default IP is 192.168.1.1.", "reset_steps": "On current firmware the Quick Internet Setup wizard requires you to create your own admin login and password. To factory reset: with the router on, hold the rear RESET button 5-10 seconds until the power LED flashes, release, and wait for reboot. Then browse to http://router.asus.com (192.168.1.1) and set a new admin password.", "source_url": "https://www.asus.com/us/support/faq/1005263/", "source_name": "ASUS Official Support — How do I enter my ASUS router's setting page using Web GUI?", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/asus-rt-ac66u-b1" }, { "slug": "asus-rt-ac68u", "brand": "ASUS", "model": "RT-AC68U", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": "router.asus.com", "default_username": "admin", "default_password": "admin", "default_password_blank": false, "credential_type": "static", "credential_note": "Older model historically ships admin / admin. Recent firmware also prompts you to set a login on first setup, so on updated units the password may be user-set.", "reset_steps": "Hold the hardware Reset button for at least 5 seconds until the power LED starts to flash.", "source_url": "https://www.asus.com/support/faq/1005263/", "source_name": "ASUS official Support FAQ 1005263", "source_archive_url": "https://web.archive.org/web/20260729064941/https://www.asus.com/support/faq/1005263/", "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/asus-rt-ac68u" }, { "slug": "asus-rt-ac86u", "brand": "ASUS", "model": "RT-AC86U", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": "router.asus.com", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "This older model historically shipped with login name 'admin' and, on early firmware, password 'admin' — but current firmware forces you to set your own password during setup. Treat 'admin/admin' as not reliable; set your own. Default IP is 192.168.1.1 on this generation.", "reset_steps": "On current firmware the setup wizard forces you to create your own admin login and password on first login. To factory reset: with the router on, press and hold the RESET button (rear) for 5-10 seconds until the power LED flashes, release, and wait for reboot. Then browse to http://router.asus.com (192.168.1.1) and set a new admin password.", "source_url": "https://www.asus.com/us/support/faq/1005263/", "source_name": "ASUS Official Support — How do I enter my ASUS router's setting page using Web GUI?", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/asus-rt-ac86u" }, { "slug": "asus-rt-ax3000", "brand": "ASUS", "model": "RT-AX3000", "category": "router", "default_gateway_ip": "192.168.50.1", "default_login_host": "router.asus.com", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "AX3000 dual-band WiFi 6. No fixed password ships with the RT-AX3000; you define one during the initial setup pass. The account name it begins with is admin.", "reset_steps": "Whether it is a brand-new unit or one just reset, the setup wizard requires a self-created admin login and password — no default is provided. Factory reset: power on, press and hold RESET at the rear for 5-10 seconds until the power LED flashes, release, and let it reboot. Then set a new admin password from http://router.asus.com (192.168.50.1).", "source_url": "https://www.asus.com/us/support/faq/1005263/", "source_name": "ASUS Official Support — How do I enter my ASUS router's setting page using Web GUI?", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/asus-rt-ax3000" }, { "slug": "asus-rt-ax55", "brand": "ASUS", "model": "RT-AX55", "category": "router", "default_gateway_ip": "192.168.50.1", "default_login_host": "router.asus.com", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "ASUS forces you to create a login account + password on first setup / after a factory reset. Legacy default account name is admin.", "reset_steps": "Hold the Reset button on the back for at least 5 seconds until the power LED starts flashing.", "source_url": "https://www.asus.com/support/faq/1005263/", "source_name": "ASUS official Support FAQ 1005263", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/asus-rt-ax55" }, { "slug": "asus-rt-ax68u", "brand": "ASUS", "model": "RT-AX68U", "category": "router", "default_gateway_ip": "192.168.50.1", "default_login_host": "www.asusrouter.com", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "AX2700-class Wi-Fi 6 router (3x3 80MHz dual-band, 4 external antennas, AiMesh support) — distinct SKU from the RT-AX3000 (a rebadged RT-AX58U) already covered. Official FAQ: on first login (or after factory reset) you must set the router login account and password yourself; there is no admin/admin.", "reset_steps": "Press and hold the WPS/Reset button on the rear panel for more than 5 seconds until the power LED flashes, then release to restore factory default settings.", "source_url": "https://www.asus.com/support/faq/1005263/", "source_name": "ASUS official FAQ — How do I enter my ASUS router's setting page using Web GUI? (applies to RT-AX68U)", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/asus-rt-ax68u" }, { "slug": "asus-rt-ax82u", "brand": "ASUS", "model": "RT-AX82U", "category": "router", "default_gateway_ip": "192.168.50.1", "default_login_host": "router.asus.com", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "RT-AX82U: WiFi 6, reached at router.asus.com or 192.168.50.1. ASUS ships nothing preset — the initial wizard demands an account name and password of your own. The account name starts as admin.", "reset_steps": "First access runs Quick Internet Setup, which requires you to invent both the admin account name and its password; there is no factory pair to fall back on. Factory reset: with power applied, press the RESET button on the rear for 5-10 seconds until the power LED blinks, let go, and let it restart. Re-run the wizard at http://router.asus.com (192.168.50.1) to pick a new password.", "source_url": "https://www.asus.com/us/support/faq/1005263/", "source_name": "ASUS Official Support — How do I enter my ASUS router's setting page using Web GUI?", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/asus-rt-ax82u" }, { "slug": "asus-rt-ax86u", "brand": "ASUS", "model": "RT-AX86U", "category": "router", "default_gateway_ip": "192.168.50.1", "default_login_host": "router.asus.com", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "Current firmware requires you to set your own admin password during setup. The account name defaults to 'admin', but there is no fixed default password.", "reset_steps": "On first login or after a reset, the Quick Internet Setup wizard forces you to create your own admin login name and password — no admin/admin default. To factory reset: with the router on, press and hold the RESET button (rear, near the WAN port) for 5-10 seconds until the power LED flashes, release, and wait for reboot. Then browse to http://router.asus.com (192.168.50.1) and set a new admin password.", "source_url": "https://www.asus.com/us/support/faq/1005263/", "source_name": "ASUS Official Support — How do I enter my ASUS router's setting page using Web GUI?", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/asus-rt-ax86u" }, { "slug": "asus-rt-ax86u-pro", "brand": "ASUS", "model": "RT-AX86U Pro", "category": "router", "default_gateway_ip": "192.168.50.1", "default_login_host": "router.asus.com", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "On the RT-AX86U Pro there is no admin/admin. The firmware stops at a create-your-credentials screen the first time you connect. Its starting login name is admin, and the password is only ever the one you typed.", "reset_steps": "The wizard on first login makes you build your own admin login and password, so no factory password is documented. To restore defaults: with the unit running, hold RESET at the back 5-10 seconds until the power LED flashes, release, and allow the reboot. Set the admin password once more via http://router.asus.com (192.168.50.1).", "source_url": "https://www.asus.com/us/support/faq/1005263/", "source_name": "ASUS Official Support — How do I enter my ASUS router's setting page using Web GUI?", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/asus-rt-ax86u-pro" }, { "slug": "asus-rt-ax88u", "brand": "ASUS", "model": "RT-AX88U", "category": "router", "default_gateway_ip": "192.168.50.1", "default_login_host": "router.asus.com", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "ASUS forces creating a login account + password during initial QIS setup / after factory reset. Legacy default account name is admin.", "reset_steps": "Hold the Reset button on the back for at least 5 seconds until the power LED starts flashing, then release.", "source_url": "https://www.asus.com/support/faq/1005263/", "source_name": "ASUS official Support FAQ 1005263", "source_archive_url": "https://web.archive.org/web/20260729064941/https://www.asus.com/support/faq/1005263/", "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/asus-rt-ax88u" }, { "slug": "asus-rt-be86u", "brand": "ASUS", "model": "RT-BE86U", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": "router.asus.com", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "Wi-Fi 7 (802.11be) BE6800 dual-band router with SMB/UPnP-AV/FTP file sharing, desktop form factor with external antennas — a step below the dual-10G RT-BE88U in this run. On first setup ASUS forces a login: \"change the router's login password to prevent unauthorized access to your wireless router.\"", "reset_steps": "Press and hold the recessed Reset button on the rear until the power LED flashes (about 5-10 seconds), then complete the Quick Internet Setup (QIS) to set a new login.", "source_url": "https://dlcdnets.asus.com/pub/ASUS/wireless/RT-BE86U/E25474_RT-BE86U_UM_WEB.pdf", "source_name": "ASUS RT-BE86U User Guide (E25474) — official PDF", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/asus-rt-be86u" }, { "slug": "asus-rt-be88u", "brand": "ASUS", "model": "RT-BE88U", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": "router.asus.com", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "Wi-Fi 7 (802.11be) BE7200 dual-band 4x4 prosumer router with dual 10 Gbps ports (WAN/LAN + SFP+), quad 2.5 Gbps LAN and USB 3.2 Gen1 — a wired-heavy tier distinct from the RT-BE96U already covered. No admin/admin: ASUS forces you to set the login during first setup — \"change the router's login password to prevent unauthorized access to your wireless router.\"", "reset_steps": "Press and hold the recessed Reset button on the rear until the power LED starts flashing (about 5-10 seconds), then re-run the Quick Internet Setup (QIS) to create a new login.", "source_url": "https://dlcdnets.asus.com/pub/ASUS/wireless/RT-BE88U/E23805_RT-BE88U_UM_WEB.pdf", "source_name": "ASUS RT-BE88U User Guide (E23805) — official PDF", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/asus-rt-be88u" }, { "slug": "asus-rt-be96u", "brand": "ASUS", "model": "RT-BE96U (BE19000, WiFi 7)", "category": "router", "default_gateway_ip": "192.168.50.1", "default_login_host": "router.asus.com", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "BE19000 WiFi 7 flagship. No factory admin/admin — AsusWRT makes you set the login account and password during first setup at router.asus.com (192.168.50.1) or via the ASUS Router app. admin is the conventional login name.", "reset_steps": "Hold the Reset button on the back at least 5 seconds until the power LED flashes, then release; on the Quick Internet Setup that follows you create the router login account and password.", "source_url": "https://www.asus.com/support/faq/1005263/", "source_name": "ASUS official Support FAQ 1005263", "source_archive_url": "https://web.archive.org/web/20260729064941/https://www.asus.com/support/faq/1005263/", "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/asus-rt-be96u" }, { "slug": "asus-tuf-gaming-ax3000", "brand": "ASUS", "model": "TUF Gaming AX3000 (TUF-AX3000)", "category": "router", "default_gateway_ip": "192.168.50.1", "default_login_host": "router.asus.com", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "AX3000 dual-band WiFi 6 gaming router. Same AsusWRT model: no preset password, you create the login account on first setup (router.asus.com / 192.168.50.1 or the ASUS Router app). Behavior per ASUS's general router FAQ.", "reset_steps": "Press and hold Reset at least 5 seconds until the power LED blinks, release to factory-reset, then complete Quick Internet Setup where you choose the admin login and password.", "source_url": "https://www.asus.com/support/faq/1005263/", "source_name": "ASUS official Support FAQ 1005263", "source_archive_url": "https://web.archive.org/web/20260729064941/https://www.asus.com/support/faq/1005263/", "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/asus-tuf-gaming-ax3000" }, { "slug": "asus-tuf-ax5400", "brand": "ASUS", "model": "TUF Gaming AX5400 (TUF-AX5400)", "category": "router", "default_gateway_ip": "192.168.50.1", "default_login_host": "router.asus.com", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "The TUF Gaming AX5400 is WiFi 6 hardware and it ships with no usable password. Quick Internet Setup will not complete until you supply your own; the login name it starts from is admin.", "reset_steps": "No default exists because QIS forces a self-chosen admin login name and password at first access. For a factory reset, keep the rear RESET button held 5-10 seconds with the router on, until the power LED flashes; release and wait out the reboot. Then re-run QIS at http://router.asus.com (192.168.50.1) and choose the admin password again.", "source_url": "https://www.asus.com/us/support/faq/1005263/", "source_name": "ASUS Official Support — How do I enter my ASUS router's setting page using Web GUI?", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/asus-tuf-ax5400" }, { "slug": "asus-zenwifi-xt8", "brand": "ASUS", "model": "ZenWiFi AX (XT8)", "category": "mesh", "default_gateway_ip": "192.168.50.1", "default_login_host": "router.asus.com", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "Modern ZenWiFi firmware forces you to create your own admin password during first setup — there is no admin/admin default. The account NAME defaults to 'admin', but the password is whatever you set.", "reset_steps": "During ASUS Router app or web setup (Quick Internet Setup), you create your own admin login name and password — there is no fixed default password. To factory reset: with the node powered on, press and hold the RESET button (recessed, next to the ports on the back) for 5-10 seconds until the power LED starts flashing, then release and wait for it to reboot. Re-run setup via the ASUS Router app or by browsing to http://router.asus.com (192.168.50.1) and create a new admin password.", "source_url": "https://www.asus.com/us/support/faq/1005263/", "source_name": "ASUS Official Support — How do I enter my ASUS router's setting page using Web GUI?", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/asus-zenwifi-xt8" }, { "slug": "asus-zenwifi-xd4", "brand": "ASUS", "model": "ZenWiFi AX Mini (XD4)", "category": "mesh", "default_gateway_ip": "192.168.50.1", "default_login_host": "router.asus.com", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "XD4 is app-first mesh but still exposes the web GUI; either way you must set your own admin password on first setup. No admin/admin default. Account name defaults to 'admin'.", "reset_steps": "Initial setup through the ASUS Router app forces you to create your own admin login and password — no default password ships. To factory reset a node: power it on, press and hold the RESET button on the bottom for 5-10 seconds until the LED flashes, release, and wait for reboot. Re-run setup at http://router.asus.com (192.168.50.1) to set a new admin password.", "source_url": "https://www.asus.com/us/support/faq/1005263/", "source_name": "ASUS Official Support — How do I enter my ASUS router's setting page using Web GUI?", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/asus-zenwifi-xd4" }, { "slug": "asus-zenwifi-bd4", "brand": "ASUS", "model": "ZenWiFi BD4", "category": "mesh", "default_gateway_ip": "192.168.50.1", "default_login_host": "router.asus.com", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "Wi-Fi 7 (802.11be) BE3600 dual-band AiMesh whole-home mesh system with two auto-sensing 2.5GbE ports per node — the Wi-Fi 7 entry tier below the ZenWiFi BQ16 already covered. Web setup redirects to the ASUS QIS wizard where the owner creates the login; ASUS: \"Login name and password are required when accessing to router configuration page.\"", "reset_steps": "Press and hold the Reset button on the rear of a node until the LED indicates a reset, then re-run setup via a web browser (redirects to the ASUS Setup Wizard) or the ASUS Router App to create a new login.", "source_url": "https://www.asus.com/support/faq/1016107/", "source_name": "ASUS official Support FAQ 1016107 (QIS setup)", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/asus-zenwifi-bd4" }, { "slug": "asus-zenwifi-bd4-outdoor", "brand": "ASUS", "model": "ZenWiFi BD4 Outdoor (BE3600)", "category": "mesh", "default_gateway_ip": "192.168.50.1", "default_login_host": "router.asus.com", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "BE3600 dual-band Wi-Fi 7 outdoor (IP65-rated) mesh node with 2.5GbE PoE — a weatherproof SKU with its own manual (E25876), distinct from the indoor ZenWiFi BD4 already covered. No default password; QIS forces you to set the login name and password on first setup. ASUS: \"Set up a password for your router to prevent unauthorized access.\"", "reset_steps": "Press the Reset button to restore factory defaults, then complete Quick Internet Setup (QIS), which forces a new login username and password.", "source_url": "https://dlcdnets.asus.com/pub/ASUS/wireless/BD4%20Outdoor/E25876_ZenWiFi_BD4_Outdoor_UM_v2_WEB.pdf", "source_name": "ASUS ZenWiFi BD4 Outdoor User Guide (official, E25876)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/asus-zenwifi-bd4-outdoor" }, { "slug": "asus-zenwifi-bq16", "brand": "ASUS", "model": "ZenWiFi BQ16", "category": "mesh", "default_gateway_ip": "192.168.50.1", "default_login_host": "router.asus.com", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "This tri-band mesh forces you to create your own admin password on first login — there is no admin/admin default. Account name defaults to 'admin'.", "reset_steps": "During first setup (ASUS Router app or Quick Internet Setup) you create your own admin login and password — nothing ships pre-set. To factory reset: power the node on, press and hold the RESET button 5-10 seconds until the power LED flashes, release, and wait for reboot. Re-run setup at http://router.asus.com (192.168.50.1) to define a new admin password.", "source_url": "https://www.asus.com/us/support/faq/1005263/", "source_name": "ASUS Official Support — How do I enter my ASUS router's setting page using Web GUI?", "source_archive_url": "https://web.archive.org/web/20260729064943/https://www.asus.com/us/support/faq/1005263/", "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/asus-zenwifi-bq16" }, { "slug": "asus-zenwifi-et8", "brand": "ASUS", "model": "ZenWiFi ET8 (AXE6600)", "category": "mesh", "default_gateway_ip": "192.168.50.1", "default_login_host": "router.asus.com", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "AXE6600 tri-band Wi-Fi 6E mesh (2.4 + 5 + 6 GHz; 6 GHz up to 4804 Mbps) with a 2.5G WAN port. No universal default password — the web login credentials are created during first-time QIS; the legacy default account name is admin. ASUS: \"Set up a password for your router to prevent unauthorized access.\"", "reset_steps": "Hold the rear Reset button until the power LED flashes to restore defaults; Quick Internet Setup (QIS) then runs again and makes you set a new login name and password.", "source_url": "https://dlcdnets.asus.com/pub/ASUS/wireless/ZenWiFi_ET8/E19334_ZenWiFi_ET8_UM_WEB.pdf", "source_name": "ASUS ZenWiFi ET8 User Guide (official, E19334)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/asus-zenwifi-et8" }, { "slug": "asus-zenwifi-xd6", "brand": "ASUS", "model": "ZenWiFi XD6", "category": "mesh", "default_gateway_ip": "192.168.50.1", "default_login_host": "router.asus.com", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "No admin/admin default — firmware forces a password on first login. Login name defaults to 'admin'.", "reset_steps": "Quick Internet Setup (web or ASUS Router app) requires you to create your own admin login name and password — no default password. To factory reset: with the unit on, hold the rear RESET button 5-10 seconds until the power LED flashes, then release and let it reboot. Re-run setup at http://router.asus.com (192.168.50.1) and set a new admin password.", "source_url": "https://www.asus.com/us/support/faq/1005263/", "source_name": "ASUS Official Support — How do I enter my ASUS router's setting page using Web GUI?", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/asus-zenwifi-xd6" }, { "slug": "asus-zenwifi-xt9", "brand": "ASUS", "model": "ZenWiFi XT9", "category": "mesh", "default_gateway_ip": "192.168.50.1", "default_login_host": "router.asus.com", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "Firmware requires creating your own admin password on first login; there is no universal admin/admin. Login name defaults to 'admin'.", "reset_steps": "Setup (ASUS Router app or Quick Internet Setup) makes you choose your own admin login name and password — no fixed default. To factory reset: power the node on, press and hold the rear RESET button 5-10 seconds until the power LED flashes, release, and let it reboot. Re-run setup at http://router.asus.com (192.168.50.1) and set a new admin password.", "source_url": "https://www.asus.com/us/support/faq/1005263/", "source_name": "ASUS Official Support — How do I enter my ASUS router's setting page using Web GUI?", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/asus-zenwifi-xt9" }, { "slug": "att-bgw210-700", "brand": "AT&T", "model": "BGW210-700", "category": "gateway", "default_gateway_ip": "192.168.1.254", "default_login_host": "192.168.1.254", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "The BGW210 uses a per-device 'Device Access Code' on the label, not a shared password. Older third-party lists cite 'attadmin', but current units authenticate only with the unique code printed on the gateway.", "reset_steps": "Browse to http://192.168.1.254. No username is required; enter the Device Access Code from the sticker on the side/bottom of the BGW210 when prompted to change settings. To restore factory defaults and reset the access code, press and hold the recessed Reset button ~10 seconds (hold ~15-20 seconds for a full reset), then authorize using the label's Device Access Code.", "source_url": "https://www.att.com/support/article/u-verse-high-speed-internet/KM1049866/", "source_name": "AT&T Internet Support — Change Your Wi-Fi Gateway Access Code", "source_archive_url": "https://web.archive.org/web/20260729070033/https://www.att.com/support/article/u-verse-high-speed-internet/KM1049866/", "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/att-bgw210-700" }, { "slug": "att-bgw320", "brand": "AT&T", "model": "BGW320 All-Fi Hub", "category": "gateway", "default_gateway_ip": "192.168.1.254", "default_login_host": "192.168.1.254", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "AT&T gateways have no admin username and no shared default password. The single credential is the per-device 'Device Access Code' printed on the gateway label — each unit is different, so no universal default exists.", "reset_steps": "Open a browser to http://192.168.1.254 to reach the gateway UI. There is no username; when a setting asks for authorization, enter the Device Access Code printed on the sticker on the side of the BGW320 (a unique alphanumeric string). To reset the access code, press and hold the recessed Reset button on the side for ~10 seconds; a longer 15-20 second hold performs a full factory reset. After reset, use the Device Access Code printed on the label.", "source_url": "https://www.att.com/support/article/u-verse-high-speed-internet/KM1049866/", "source_name": "AT&T Internet Support — Change Your Wi-Fi Gateway Access Code", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/att-bgw320" }, { "slug": "att-wifi-gateway", "brand": "AT&T", "model": "Wi-Fi Gateway (2Wire / Pace / BGW / NVG)", "category": "gateway", "default_gateway_ip": "192.168.1.254", "default_login_host": null, "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "AT&T's 2Wire/Pace/BGW/NVG gateways do not use admin/admin — each unit has a unique Device Access Code printed on a sticker on the gateway. AT&T's official support confirms the code lives on the device label and is reset to that label value by a factory reset.", "reset_steps": "Open a browser to http://192.168.1.254 to reach the Gateway User Interface. When asked for a Device Access Code, enter the code printed on the sticker on the side or bottom of the gateway. To reset, press and hold the Reset button for about 10 seconds until the gateway restarts; the access code reverts to the one on the label.", "source_url": "https://www.att.com/support/article/u-verse-high-speed-internet/KM1206322/", "source_name": "AT&T Support — Gateway User Interface for Wi-Fi gateways", "source_archive_url": "https://web.archive.org/web/20260729070812/https://www.att.com/support/article/u-verse-high-speed-internet/KM1206322/", "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/att-wifi-gateway" }, { "slug": "avm-fritzbox-4060", "brand": "AVM", "model": "FRITZ!Box 4060", "category": "router", "default_gateway_ip": "192.168.178.1", "default_login_host": "fritz.box", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "The FRITZ!Box 4060 is a pure tri-band Wi-Fi 6 router with no modem and no telephone ports. Its factory password is unique per device and printed on the underside label; enter it at http://fritz.box (192.168.178.1). There is no username and no admin/admin default.", "reset_steps": "Because the 4060 has no phone ports, reset it from the interface: System > Backup > Load Factory Settings, then confirm and wait for the WLAN LED to stay lit.", "source_url": "https://fritz.com/en/apps/knowledge-base/FRITZ-Box-4060/3531_Determining-the-password-for-the-FRITZ-Box-user-interface/", "source_name": "AVM official FRITZ!Box 4060 knowledge base #3531", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/avm-fritzbox-4060" }, { "slug": "avm-fritzbox-5590-fiber", "brand": "AVM", "model": "FRITZ!Box 5590 Fiber", "category": "gateway", "default_gateway_ip": "192.168.178.1", "default_login_host": "fritz.box", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "The FRITZ!Box 5590 Fiber is an AON/GPON fibre gateway with Wi-Fi 6 and telephony. Like other current FRITZ!Box models it carries a unique password on the base type label rather than a shared default, entered at http://fritz.box (192.168.178.1); there is no username.", "reset_steps": "Use System > Backup > Load Factory Settings in the interface and confirm, or dial #991*15901590* on an attached phone and hang up after about three seconds, to restore factory defaults.", "source_url": "https://fritz.com/en/apps/knowledge-base/FRITZ-Box-5590-Fiber/3531_Determining-the-password-for-the-FRITZ-Box-user-interface/", "source_name": "AVM official FRITZ!Box 5590 Fiber knowledge base #3531", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/avm-fritzbox-5590-fiber" }, { "slug": "avm-fritzbox-6591-cable", "brand": "AVM", "model": "FRITZ!Box 6591 Cable", "category": "router", "default_gateway_ip": "192.168.178.1", "default_login_host": "fritz.box", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "DOCSIS 3.1 cable modem router with FRITZ!Mesh support (as Master or Repeater) — distinct from the DSL/fibre FRITZ!Box models already covered. Login password is a unique per-device string printed on the type label on the bottom of the housing, not a shared default, per AVM's own knowledge base.", "reset_steps": "Press and hold the Reset button on the rear panel for about 5 seconds, or use System > Backup > Restore Factory Settings in the FRITZ!OS user interface.", "source_url": "https://en.avm.de/service/knowledge-base/dok/FRITZ-Box-6591-Cable/1_Opening-the-FRITZ-Box-user-interface/", "source_name": "AVM FRITZ! Knowledge Base — Opening/Determining the password for the FRITZ!Box user interface (FRITZ!Box 6591 Cable) (official)", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/avm-fritzbox-6591-cable" }, { "slug": "avm-fritzbox-6660-cable", "brand": "AVM", "model": "FRITZ!Box 6660 Cable", "category": "gateway", "default_gateway_ip": "192.168.178.1", "default_login_host": "fritz.box", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "The FRITZ!Box 6660 Cable is a DOCSIS 3.1 cable gateway with Wi-Fi 6. It has no default admin/admin: the per-unit password is printed on the type label on the base and typed into http://fritz.box (192.168.178.1). Login is password-only.", "reset_steps": "Restore defaults from System > Backup > Load Factory Settings in the FRITZ!OS interface, or dial #991*15901590* from a connected telephone and hang up after about three seconds.", "source_url": "https://fritz.com/en/apps/knowledge-base/FRITZ-Box-6660-Cable/3531_Determining-the-password-for-the-FRITZ-Box-user-interface/", "source_name": "AVM official FRITZ!Box 6660 Cable knowledge base #3531", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/avm-fritzbox-6660-cable" }, { "slug": "avm-fritzbox-7490", "brand": "AVM", "model": "FRITZ!Box 7490", "category": "router", "default_gateway_ip": "192.168.178.1", "default_login_host": "fritz.box", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "The FRITZ!Box 7490 is an older VDSL/ADSL flagship. Unlike current models it ships with NO password at all — on the first visit to http://fritz.box (192.168.178.1) you must set your own. There is still no username field and no admin/admin default.", "reset_steps": "Assign your own password on the first visit. To factory-reset, use System > Backup > Load Factory Settings in the interface, or dial #991*15901590* from an attached telephone and hang up after about three seconds.", "source_url": "https://fritz.com/en/apps/knowledge-base/FRITZ-Box-7490/3531_Determining-the-password-for-the-FRITZ-Box-user-interface/", "source_name": "AVM official FRITZ!Box 7490 knowledge base #3531", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/avm-fritzbox-7490" }, { "slug": "avm-fritzbox-7530", "brand": "AVM", "model": "FRITZ!Box 7530", "category": "router", "default_gateway_ip": "192.168.178.1", "default_login_host": "fritz.box", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "The FRITZ!Box 7530 is a compact VDSL/ADSL router with DECT telephony. AVM ships it with a per-device user-interface password on the underside type label (no admin/admin, no username); type it in at http://fritz.box or 192.168.178.1.", "reset_steps": "In the FRITZ!OS interface choose System > Backup > Load Factory Settings and confirm; alternatively dial #991*15901590* from a connected phone and hang up after a few seconds.", "source_url": "https://fritz.com/en/apps/knowledge-base/FRITZ-Box-7530/3531_Determining-the-password-for-the-FRITZ-Box-user-interface/", "source_name": "AVM official FRITZ!Box 7530 knowledge base #3531", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/avm-fritzbox-7530" }, { "slug": "avm-fritzbox-7530-ax", "brand": "AVM", "model": "FRITZ!Box 7530 AX", "category": "router", "default_gateway_ip": "192.168.178.1", "default_login_host": "fritz.box", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "The 7530 AX adds Wi-Fi 6 to AVM's popular compact 7530 DSL router. Its user interface is protected by a unique factory password printed on the device label — not a universal default — and is reached at http://fritz.box (192.168.178.1) with a password only.", "reset_steps": "Factory-reset from System > Backup > Load Factory Settings in the interface, or from a connected telephone dial #991*15901590* and hang up after roughly three seconds.", "source_url": "https://fritz.com/en/apps/knowledge-base/FRITZ-Box-7530-AX/3531_Determining-the-password-for-the-FRITZ-Box-user-interface/", "source_name": "AVM official FRITZ!Box 7530 AX knowledge base #3531", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/avm-fritzbox-7530-ax" }, { "slug": "avm-fritzbox-7583", "brand": "AVM", "model": "FRITZ!Box 7583", "category": "router", "default_gateway_ip": "192.168.178.1", "default_login_host": "fritz.box", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "The FRITZ!Box 7583 is a VDSL supervectoring (35b) router aimed at long lines and small-business use, with DECT and telephony. It ships with a unique label password (no shared default, no username) used at http://fritz.box or 192.168.178.1.", "reset_steps": "Reset via System > Backup > Load Factory Settings in the interface, or by dialling #991*15901590* on a connected phone and hanging up after a few seconds.", "source_url": "https://fritz.com/en/apps/knowledge-base/FRITZ-Box-7583/3531_Determining-the-password-for-the-FRITZ-Box-user-interface/", "source_name": "AVM official FRITZ!Box 7583 knowledge base #3531", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/avm-fritzbox-7583" }, { "slug": "avm-fritzbox-7590", "brand": "AVM", "model": "FRITZ!Box 7590", "category": "router", "default_gateway_ip": "192.168.178.1", "default_login_host": "fritz.box", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "The FRITZ!Box 7590 is AVM's flagship VDSL/ADSL router with a built-in DECT base and analog/ISDN telephony. There is no admin/admin: each unit ships with its own password (4–6 lower-case letters then 4 digits) printed on the type label underneath, entered at http://fritz.box (192.168.178.1) with no username.", "reset_steps": "Open the interface and choose System > Backup > Load Factory Settings and confirm — the LEDs flash once and the WLAN LED stays lit when finished. On a connected phone you can instead dial #991*15901590* and hang up after about three seconds.", "source_url": "https://fritz.com/en/apps/knowledge-base/FRITZ-Box-7590/3531_Determining-the-password-for-the-FRITZ-Box-user-interface/", "source_name": "AVM official FRITZ!Box 7590 knowledge base #3531", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/avm-fritzbox-7590" }, { "slug": "avm-fritzbox-7590-ax", "brand": "AVM", "model": "FRITZ!Box 7590 AX", "category": "router", "default_gateway_ip": "192.168.178.1", "default_login_host": "fritz.box", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "The 7590 AX is the Wi-Fi 6 (AX) revision of AVM's 7590 DSL flagship. Login is password-only at http://fritz.box (192.168.178.1): the factory password is unique to the device and printed on its base label, so there is no shared default and no username field.", "reset_steps": "Reset from the interface via System > Backup > Load Factory Settings (confirm, then the WLAN LED stays lit), or dial #991*15901590* on an attached telephone and hang up after roughly three seconds.", "source_url": "https://fritz.com/en/apps/knowledge-base/FRITZ-Box-7590-AX/3531_Determining-the-password-for-the-FRITZ-Box-user-interface/", "source_name": "AVM official FRITZ!Box 7590 AX knowledge base #3531", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/avm-fritzbox-7590-ax" }, { "slug": "belkin-f-series", "brand": "Belkin", "model": "F-Series Wi-Fi Router", "category": "router", "default_gateway_ip": "192.168.2.1", "default_login_host": "router", "default_username": null, "default_password": null, "default_password_blank": true, "credential_type": "static", "credential_note": "Per Belkin's official support, these routers ship with the admin dashboard unlocked — there is no default password at all (both fields blank). You optionally click the lock icon to set one. This is why aggregators listing admin/admin for Belkin are wrong.", "reset_steps": "Open a browser to http://192.168.2.1 (or http://router). By default the dashboard opens without a password — leave the username and password blank and submit. To factory reset, press and hold the Reset button on the bottom for about 10-15 seconds until the lights blink, then release; the dashboard returns to no-password (unlocked).", "source_url": "https://www.belkin.com/support-article/?articleNum=80321", "source_name": "Belkin Official Support — Accessing 192.168.2.1", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/belkin-f-series" }, { "slug": "belkin-n-ac-legacy", "brand": "Belkin", "model": "Legacy N & AC routers (192.168.2.1 models, e.g. F9K/N600/N750)", "category": "router", "default_gateway_ip": "192.168.2.1", "default_login_host": null, "default_username": null, "default_password": null, "default_password_blank": true, "credential_type": "static", "credential_note": "Belkin Official Support states these older Belkin routers 'don't have default passwords' — the admin password is blank out of the box, so you log in by clicking Login then Submit. There is no admin/admin. Set a password after logging in.", "reset_steps": "Hold the Reset button for about 10 seconds to restore factory defaults (this erases current settings). Open a browser and go to http://192.168.2.1 (or http://router). Click Login and then Submit, leaving the password blank — older Belkin routers ship with no default password.", "source_url": "https://www.belkin.com/support-article/?articleNum=80321", "source_name": "Belkin Official Support — Accessing 192.168.2.1 (default password / login)", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/belkin-n-ac-legacy" }, { "slug": "belkin-rt1800", "brand": "Belkin", "model": "RT1800 (WiFi 6 AX1800)", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": null, "default_username": null, "default_password": "admin", "default_password_blank": false, "credential_type": "static", "credential_note": "Belkin officially lists the RT1800 default password as 'admin' with no username, and default IP 192.168.1.1 — this is a genuine documented static default, so change it immediately after setup.", "reset_steps": "Hold the Reset button for about 10 seconds until the router restarts to factory defaults. If the setup wizard closes on a Mac, install manually: browse to http://192.168.1.1 and log in with the default password 'admin'. Default WiFi names are BelkinXXXXX and BelkinXXXXX_5GHz (XXXXX = last five digits of the serial); the default guest password is 'guest'.", "source_url": "https://www.belkin.com/support-article/?articleNum=333517", "source_name": "Belkin Official Support — RT1800 setup / default settings", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/belkin-rt1800" }, { "slug": "belkin-rt3200", "brand": "Belkin", "model": "RT3200 (WiFi 6 AX3200)", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": "myrouter.local", "default_username": null, "default_password": "admin", "default_password_blank": false, "credential_type": "static", "credential_note": "Belkin's own RT3200 user guide states the default parent-router password is 'admin' (no username). It is meant to be changed during setup; treat 'admin' only as the untouched factory value.", "reset_steps": "Hold the Reset button on the back/bottom for about 10 seconds (or use the Administration tab in the router's settings) to restore factory defaults. Browse to http://myrouter.local (or http://192.168.1.1) and log in — the user guide states the default password is 'admin' if you skipped setup or never changed it.", "source_url": "https://s3.belkin.com/support/assets/belkin/userguide/RT3200_USERGUIDE_LNKPG-00736%20RevB00.pdf", "source_name": "Belkin Official Support — RT3200 User Guide (PDF)", "source_archive_url": "https://web.archive.org/web/20260729070946/https://s3.belkin.com/support/assets/belkin/userguide/RT3200_USERGUIDE_LNKPG-00736%20RevB00.pdf", "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/belkin-rt3200" }, { "slug": "bell-home-hub-4000", "brand": "Bell", "model": "Bell Home Hub 4000", "category": "gateway", "default_gateway_ip": "192.168.2.1", "default_login_host": "bell.ca/mymodem", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "Canadian fibre/FTTH gateway. Admin is reached at bell.ca/mymodem (when connected) or 192.168.2.1. There is no default username, and the default administrator password is the modem's own serial number printed on the sticker on the back of the unit — a unique per-device value, not a generic default.", "reset_steps": "Perform a factory reset (hold the reset button on the modem) to restore the default admin password, which is the serial number on the back-panel sticker. On-device, use the front up/down arrows to select Modem Management to view settings.", "source_url": "https://support.bell.ca/internet/connection-help/home-hub-4000-modem.how_to_set_or_change_the_administrator_password", "source_name": "Bell Official Support — Set or change the administrator password (Home Hub 4000)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/bell-home-hub-4000" }, { "slug": "bell-giga-hub", "brand": "Bell", "model": "Giga Hub", "category": "gateway", "default_gateway_ip": "192.168.2.1", "default_login_host": "bell.ca/mymodem", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "Bell's tri-band Wi-Fi 6 fibre gateway (XGS-PON/GPON FTTH, supports Bell Home phone/VoIP). Admin login is password-only with no username field; the default password is the unit's serial number from the rear label — unique per device, not a shared static default. Distinct from the older Home Hub 4000.", "reset_steps": "Browse to bell.ca/mymodem (or 192.168.2.1) and log in with the administrator password, which by default is the serial number printed on the sticker on the back of the modem. To wipe a custom password, hold the recessed reset button on the back until the modem restarts.", "source_url": "https://business.bell.ca/support/small-business/internet/modems/hub-giga/managing-my-giga-hub-modem", "source_name": "Bell Support — Managing my Giga Hub modem (official)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/bell-giga-hub" }, { "slug": "brightspeed-c4000", "brand": "Brightspeed", "model": "C4000 (Axon/Zyxel)", "category": "gateway", "default_gateway_ip": "192.168.0.1", "default_login_host": "192.168.0.1", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "Applies to Axon C4000BG/LG/XG and Zyxel C4000BZ/LZ. Brightspeed provisions a unique admin username and password on each modem's sticker — there is no shared default, and the preset values cannot be retrieved if the sticker is lost.", "reset_steps": "Browse to http://192.168.0.1 to open the modem GUI. Log in with the Admin Username and Admin Password on the sticker attached to the side/back/bottom of the modem (unique per device; different from the WiFi network name/key). To factory reset, press and hold the recessed Reset button ~10-15 seconds until it reboots, then sign in with the label's default Admin credentials.", "source_url": "https://www.brightspeed.com/help/internet/modems-and-routers/advanced-setup/administrator-password.html", "source_name": "Brightspeed — Administrator Password, Advanced Modem Setup", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/brightspeed-c4000" }, { "slug": "bsnl-wa3002-g4", "brand": "BSNL", "model": "Broadband ADSL Modem (Type-2 WA3002-G4)", "category": "gateway", "default_gateway_ip": "192.168.1.1", "default_login_host": null, "default_username": "admin", "default_password": "admin", "default_password_blank": false, "credential_type": "static", "credential_note": "BSNL's official circle support page documents http://192.168.1.1 with admin / admin for this legacy ADSL modem. Note that BSNL Bharat Fibre (FTTH) hands out Nokia/ZTE/Syrotech GPON ONTs instead, which are provisioned by BSNL and usually carry a per-device admin password on the label rather than admin/admin.", "reset_steps": "Connect to the modem by LAN or Wi-Fi, open http://192.168.1.1 in a browser, and sign in with username admin and password admin (BSNL's documented default). Configure the PPPoE connection with the broadband username/password given by BSNL, then set WPA-PSK wireless security. To factory reset, hold the recessed RESET button for about 10 seconds until the modem reboots, then log back in at 192.168.1.1.", "source_url": "https://www.chennai.bsnl.co.in/BB/Wireless/WirelessSecurity.htm", "source_name": "BSNL Chennai Telephones — Modem Configuration / Wireless Security", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/bsnl-wa3002-g4" }, { "slug": "bt-smart-hub-2", "brand": "BT", "model": "Smart Hub 2", "category": "gateway", "default_gateway_ip": "192.168.1.254", "default_login_host": "bthomehub.home", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "There is no admin/admin default. Each BT Smart Hub 2 ships with a unique admin password printed on the pull-out settings card on the back (or the base label). The admin password is separate from the WiFi key.", "reset_steps": "To log in: connect to the hub, open a browser and go to bthomehub.home or 192.168.1.254, then enter the admin password. The admin password is on the pull-out settings card on the back of the hub (and on the base label). It is not your WiFi key. To factory reset: with the hub powered on, press and hold the recessed Reset button on the back for about 20 seconds until the lights flash; the hub reboots and all settings, including the admin password, revert to those printed on the card.", "source_url": "https://www.bt.com/help/broadband/fix-a-problem/log-in-issues/i-can-t-log-in-to-bt-hub-manager/how-can-i-set-up-or-change-the-admin-password-on-my-bt-hub-", "source_name": "BT Help — Set up or change the admin password on my BT Hub", "source_archive_url": "https://web.archive.org/web/20260729070423/https://www.bt.com/help/broadband/fix-a-problem/log-in-issues/i-can-t-log-in-to-bt-hub-manager/how-can-i-set-up-or-change-the-admin-password-on-my-bt-hub-", "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/bt-smart-hub-2" }, { "slug": "buffalo-airstation-whr-1166d", "brand": "Buffalo", "model": "AirStation WHR-1166D", "category": "router", "default_gateway_ip": "192.168.11.1", "default_login_host": null, "default_username": "admin", "default_password": "password", "default_password_blank": false, "credential_type": "static", "credential_note": "Buffalo's official AirStation manual documents the genuine factory default as username 'admin' / password 'password' at 192.168.11.1 — one of the few brands with a real universal default. The initial settings are also printed on the AirStation setup card stored in the base. Change the password after logging in.", "reset_steps": "Hold the Reset button until the AirStation reinitializes to factory defaults. In router mode browse to http://192.168.11.1 (in bridge/access-point mode use http://192.168.11.100); if a login prompt appears, enter username 'admin' and password 'password', click Log In, and step through the wizard.", "source_url": "https://manual.buffalo.jp/buf-doc/35020394-01_EN.pdf", "source_name": "Buffalo — AirStation WHR-1166D User Manual (PDF, manual.buffalo.jp)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/buffalo-airstation-whr-1166d" }, { "slug": "buffalo-airstation-wsr-1166dhp", "brand": "Buffalo", "model": "AirStation WSR-1166DHP", "category": "router", "default_gateway_ip": "192.168.11.1", "default_login_host": null, "default_username": "admin", "default_password": "password", "default_password_blank": false, "credential_type": "static", "credential_note": "Buffalo's AirStation web interface uses the series-wide factory default admin / password at 192.168.11.1 (documented in Buffalo's official AirStation manuals); the initial login is also printed on the AirStation setup card in the base. Change it after first login.", "reset_steps": "Hold the Reset button until the diagnostic LED flashes and the AirStation restores factory defaults. In router mode browse to http://192.168.11.1 (bridge/AP mode: http://192.168.11.100), enter username 'admin' and password 'password' at the login prompt, click Log In, and step through the setup wizard.", "source_url": "https://manual.buffalo.jp/buf-doc/35020394-01_EN.pdf", "source_name": "Buffalo — AirStation User Manual (PDF, manual.buffalo.jp)", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/buffalo-airstation-wsr-1166dhp" }, { "slug": "centurylink-c4000", "brand": "CenturyLink", "model": "Greenwave C4000 (C4000LG/XG)", "category": "gateway", "default_gateway_ip": "192.168.0.1", "default_login_host": "192.168.0.1", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "CenturyLink prints a unique Admin Username and Admin Password on each C4000's sticker — there is no universal default. If the sticker is lost the preset credentials can't be recovered, only reset back to those on the label.", "reset_steps": "Open a browser to http://192.168.0.1 to reach the modem GUI. Sign in with the Admin Username and Admin Password printed on the sticker on the side/back/bottom of the C4000. These are unique per modem and cannot be retrieved if lost. To factory reset, press and hold the recessed Reset button ~10-15 seconds until the modem reboots, then sign in with the sticker's default Admin credentials.", "source_url": "https://www.centurylink.com/home/help/internet/modems-and-routers/advanced-setup/administrator-password.html", "source_name": "CenturyLink — Administrator Password, Advanced Modem Setup", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/centurylink-c4000" }, { "slug": "cisco-meraki-go-gr12", "brand": "Cisco Meraki", "model": "Meraki Go GR12", "category": "router", "default_gateway_ip": "10.128.128.128", "default_login_host": "my.meraki.com", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "app-only", "credential_note": "No web admin password. Setup and management are done entirely through the Meraki Go mobile app and cloud account. The local status page is unlocked by the device serial number, not an admin/admin login.", "reset_steps": "The Meraki Go GR12 is cloud-managed: download the Meraki Go app, create an account, and add the AP by scanning it — all admin control lives in the app/cloud, not a password on the device. A limited local page exists at http://my.meraki.com (or http://10.128.128.128) where the 'username' is the device serial number with no password, used only for uplink/static-IP settings. To factory reset, hold the Reset button until the AP reboots.", "source_url": "https://documentation.meraki.com/Go/Install_and_Get_Started/Meraki_Go_GR12_Installation_Guide", "source_name": "Cisco Meraki Documentation (Meraki Go GR12 Installation Guide)", "source_archive_url": "https://web.archive.org/web/20260729071417/https://documentation.meraki.com/Go/Install_and_Get_Started/Meraki_Go_GR12_Installation_Guide", "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/cisco-meraki-go-gr12" }, { "slug": "comfast-cf-wr627ax", "brand": "Comfast", "model": "CF-WR627AX", "category": "mesh", "default_gateway_ip": "192.168.0.1", "default_login_host": null, "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "Wi-Fi 6 mesh-capable router with a dedicated EasyMesh pairing button, 4 antennas, WAN + 3x LAN ports, dual-band 2.4G/5G. No default admin password — the official quick installation guide confirms the setup wizard forces password creation on first login.", "reset_steps": "With the device powered on, press the RESET button next to the LAN port for about 7 seconds until reset succeeds; on first login after reset the device goes straight to the setup wizard, which requires creating a password (used as both the Wi-Fi and router-admin password).", "source_url": "https://www.comfast.cn/uploadfile/2022/0321/CF-WR627AXManual.pdf", "source_name": "COMFAST (Shenzhen Four Seas Global Link Network Technology) — CF-WR627AX Quick Installation Guide (official)", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/comfast-cf-wr627ax" }, { "slug": "comfast-cf-wr773be-v2", "brand": "Comfast", "model": "CF-WR773BE V2", "category": "ap", "default_gateway_ip": "192.168.10.1", "default_login_host": null, "default_username": null, "default_password": "admin", "default_password_blank": false, "credential_type": "static", "credential_note": "Plug-in Wi-Fi range extender/repeater (not a full router), single LAN/WAN port, dual-band 2.4G/5G, 4 operating modes (repeater/bridge/AP/router). Official quick installation guide confirms a genuine static default password 'admin' to enter setup, immediately followed by a mandatory password-set step.", "reset_steps": "Press and hold the WPS/RESET button for about 6 seconds until the WiFi LED (which blinks once per second) turns off and stops blinking; release to restore factory defaults.", "source_url": "https://www.comfast.cn/uploadfile/2022/0321/CF-WR773BEV2Manual.pdf", "source_name": "COMFAST (Shenzhen Four Seas Global Link Network Technology) — Wireless Extender/Repeater Quick Installation Guide (official)", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/comfast-cf-wr773be-v2" }, { "slug": "cox-panoramic-wifi-gateway", "brand": "Cox", "model": "Panoramic WiFi Gateway", "category": "gateway", "default_gateway_ip": "192.168.0.1", "default_login_host": "192.168.0.1", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "Cox provisions and manages Panoramic gateways primarily through the Panoramic Wifi app and your Cox account, not a shared web password. Local admin is 'admin' with a password on the label or one you set; there is no reliable universal admin/password on current firmware.", "reset_steps": "Cox recommends managing the gateway through the Panoramic Wifi app (or online at cox.com after signing in with your Cox User ID). For local access, browse to http://192.168.0.1 and sign in with username 'admin'. If you have never changed it, try the password printed on the gateway label. To factory reset, press and hold the recessed Reset button (behind the gateway, above the phone ports) for a full 60 seconds — a shorter press only triggers WPS — then reconfigure via the app.", "source_url": "https://www.cox.com/residential/support/setting-up-wifi-with-the-panoramic-wifi-gateway.html", "source_name": "Cox Residential Support — Setting up WiFi with the Panoramic WiFi Gateway", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/cox-panoramic-wifi-gateway" }, { "slug": "cudy-wr3000", "brand": "Cudy", "model": "WR3000 (AX3000)", "category": "router", "default_gateway_ip": "192.168.10.1", "default_login_host": "cudy.net", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "Cudy's login page at cudy.net / 192.168.10.1 prompts you to set a password on first access. Some units pre-fill 'admin' as the initial password, but current firmware has you create your own - there is no guaranteed admin/admin.", "reset_steps": "Reset: with the router powered on, press and hold the RESET button for 10-15 seconds until the LEDs blink, then release and wait for reboot. Browse to http://cudy.net or 192.168.10.1 and set a new admin password.", "source_url": "https://www.cudy.com/en-us/blogs/faq/how-to-log-into-the-web-interface-of-cudy-router", "source_name": "Cudy Official FAQ - How to log into the web interface of Cudy Router", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/cudy-wr3000" }, { "slug": "d-link-adsl-dsl-series", "brand": "D-Link", "model": "ADSL Modem/Router (DSL series)", "category": "gateway", "default_gateway_ip": "192.168.1.1", "default_login_host": null, "default_username": "admin", "default_password": "admin", "default_password_blank": false, "credential_type": "static", "credential_note": "D-Link's official support states the default for its ADSL modem/router (DSL series) is admin / admin at 192.168.1.1 — many older Airtel/BSNL/MTNL DSL units are these. D-Link also notes that units purchased after 2017 are secure by default with a unique password printed on the bottom of the unit, so check the label on newer hardware.", "reset_steps": "Connect to the modem/router by LAN or Wi-Fi, open http://192.168.1.1 in a browser, and sign in with username admin and password admin (D-Link's documented default for its DSL series). If the login is rejected, the password was likely changed — keep the username admin and enter your own password. To factory reset, hold the recessed RESET button for about 10 seconds until the unit reboots, then log back in with admin / admin and reconfigure.", "source_url": "https://www.dlink.com/us/en/support/faq/modems/dsl-modems/dsl-series/what-is-the-default-username-and-password-for-my-adsl-modem-router", "source_name": "D-Link — Default username and password for my ADSL modem/router", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/d-link-adsl-dsl-series" }, { "slug": "d-link-dir-615", "brand": "D-Link", "model": "DIR-615", "category": "router", "default_gateway_ip": "192.168.0.1", "default_login_host": null, "default_username": "admin", "default_password": null, "default_password_blank": true, "credential_type": "static", "credential_note": "D-Link's documented default is username admin with a blank password — there is no admin/admin. D-Link's official login FAQ confirms admin with password blank by default for this era of routers.", "reset_steps": "Open a browser to http://192.168.0.1, select admin as the User Name and leave the Password blank, then click Log In. To factory reset, with the router on, press and hold the recessed Reset button on the bottom for about 10 seconds until it reboots; the password returns to blank.", "source_url": "https://www.dlink.com/us/en/support/faq/routers/how-do-i-log-into-my-router", "source_name": "D-Link Support FAQ — How do I log into my router", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/d-link-dir-615" }, { "slug": "d-link-dir-655", "brand": "D-Link", "model": "DIR-655", "category": "router", "default_gateway_ip": "192.168.0.1", "default_login_host": null, "default_username": "admin", "default_password": null, "default_password_blank": true, "credential_type": "static", "credential_note": "The official D-Link DIR-655 manual and Quick Install Guide state the default username is admin and the default password is blank (leave the field empty). No admin/admin exists for this model.", "reset_steps": "Open a browser to http://192.168.0.1, choose Admin from the user drop-down, leave the password field blank, and click Log In. To reset, press and hold the Reset button on the back for about 10 seconds until the router reboots; the password reverts to blank.", "source_url": "https://global.dlink.com.sg/site_support/DIR-655/QIG/DIR-655_QIG_v200.pdf", "source_name": "D-Link DIR-655 Quick Install Guide (official PDF)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/d-link-dir-655" }, { "slug": "d-link-dir-825", "brand": "D-Link", "model": "DIR-825", "category": "router", "default_gateway_ip": "192.168.0.1", "default_login_host": null, "default_username": "admin", "default_password": null, "default_password_blank": true, "credential_type": "static", "credential_note": "The official D-Link DIR-825 user manual documents username admin with the password left blank by default. Owners are expected to set a password on first configuration.", "reset_steps": "Open a browser to http://192.168.0.1, enter admin as the username, leave the password blank, and log in. Factory reset: hold the Reset button on the underside for about 10 seconds with the unit powered on until it restarts; the password returns to blank.", "source_url": "https://www.dlink.com/-/media/Consumer_Products/DIR/DIR%20825/Manual/DIR825C1manual11301130EN.pdf", "source_name": "D-Link DIR-825 User Manual (official PDF)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/d-link-dir-825" }, { "slug": "d-link-dir-882", "brand": "D-Link", "model": "DIR-882", "category": "router", "default_gateway_ip": "192.168.0.1", "default_login_host": null, "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "Ships with NO admin password — the setup wizard forces you to create one. Classic login username is admin.", "reset_steps": "With the router on, insert a paperclip into the recessed Reset hole on the back and hold ~10 seconds, then release to restore factory defaults.", "source_url": "https://support.dlink.com/resource/products/DIR-882/REVA/DIR-882-US_REVA_MANUAL_070717_v1.00_US_EN.pdf", "source_name": "D-Link DIR-882 official User Manual (v1.00)", "source_archive_url": "https://web.archive.org/web/20260212141941/https://support.dlink.com/resource/products/DIR-882/REVA/DIR-882-US_REVA_MANUAL_070717_v1.00_US_EN.pdf", "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/d-link-dir-882" }, { "slug": "d-link-dir-x1560", "brand": "D-Link", "model": "DIR-X1560 (EXO AX1500)", "category": "router", "default_gateway_ip": "192.168.0.1", "default_login_host": null, "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "No default password — the login screen has only an Admin Password field (no username). Leave blank if the setup wizard hasn't run; otherwise use the password you created.", "reset_steps": "Insert a paperclip into the recessed Reset hole on the back and hold longer than 10 seconds, then release to restore defaults.", "source_url": "https://support.dlink.com/resource/PRODUCTS/DIR-X1560/REVA/DIR-X1560_REVA_MANUAL_v1.00_WW.pdf", "source_name": "D-Link DIR-X1560 official User Manual (v1.00)", "source_archive_url": "https://web.archive.org/web/20240228211647/https://support.dlink.com/resource/PRODUCTS/DIR-X1560/REVA/DIR-X1560_REVA_MANUAL_v1.00_WW.pdf", "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/d-link-dir-x1560" }, { "slug": "d-link-dir-x1870", "brand": "D-Link", "model": "DIR-X1870 (EXO AX1800)", "category": "router", "default_gateway_ip": "192.168.0.1", "default_login_host": "dlinkrouter.local", "default_username": null, "default_password": "password", "default_password_blank": false, "credential_type": "static", "credential_note": "Wi-Fi 6 (802.11ax) AX1800 dual-band mesh-capable router (EXO AX line) — a lower tier than the AX5400 DIR-X5460. Web or D-Link Wi-Fi app setup. D-Link's Quick Install Guide states a static default: \"You will be asked for your Device/Admin Password. By default this password is 'password'.\"", "reset_steps": "Use a paperclip to press and hold the recessed Reset button for longer than 10 seconds to restore default settings, then reconnect to the Wi-Fi on the Quick Installation Card and set up again.", "source_url": "https://support.dlink.com/resource/PRODUCTS/DIR-X1870/REVA/DIR-X1870_A1_QIG_v1.01(CA)(press)_90x130.pdf", "source_name": "D-Link DIR-X1870 Quick Installation Guide v1.01 — official PDF", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/d-link-dir-x1870" }, { "slug": "d-link-dir-x3260", "brand": "D-Link", "model": "DIR-X3260 (EXO AX3200)", "category": "router", "default_gateway_ip": "192.168.0.1", "default_login_host": "dlinkrouter.local", "default_username": null, "default_password": "password", "default_password_blank": false, "credential_type": "static", "credential_note": "AX3200 dual-band mesh-capable Wi-Fi 6 EXO-series router with Gigabit WAN — a lower-tier sibling of the DIR-X4860. The first web login prompts only for a Device/Admin Password with the factory value \"password\" (no username). D-Link: \"You will be asked for your Device/Admin Password. By default this password is 'password'.\"", "reset_steps": "Power the router on, then use a paperclip to hold the recessed rear Reset button ~10 seconds and release to restore factory defaults; the Device/Admin password reverts to \"password\".", "source_url": "https://support.dlink.com/resource/products/DIR-X3260/REVA/DIR-X3260_REVA1_QIG_v1.01_(WW).pdf", "source_name": "D-Link DIR-X3260 REV A1 Quick Installation Guide v1.01 — official PDF", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/d-link-dir-x3260" }, { "slug": "d-link-dir-x4860", "brand": "D-Link", "model": "DIR-X4860 (EXO AX4800)", "category": "router", "default_gateway_ip": "192.168.0.1", "default_login_host": "dlinkrouter.local", "default_username": null, "default_password": "password", "default_password_blank": false, "credential_type": "static", "credential_note": "AX4800 dual-band mesh-capable Wi-Fi 6 (802.11ax) EXO-series router with Gigabit WAN (Ethernet). Genuine static default: the first web login asks only for a Device/Admin Password whose factory value is the word \"password\" (no username field). D-Link: \"You will be asked for your Device/Admin Password. By default this password is 'password'.\"", "reset_steps": "With the router powered on, use a paperclip to hold the recessed rear Reset button ~10 seconds, then release to restore factory defaults (the Device/Admin password returns to \"password\").", "source_url": "https://support.dlink.com/resource/products/DIR-X4860/REVA/DIR-X4860_REVA_QIG_v1.00_NA.pdf", "source_name": "D-Link DIR-X4860 REV A Quick Installation Guide v1.00 — official PDF", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/d-link-dir-x4860" }, { "slug": "d-link-dir-x5460", "brand": "D-Link", "model": "DIR-X5460 (EXO AX5400)", "category": "router", "default_gateway_ip": "192.168.0.1", "default_login_host": "dlinkrouter.local", "default_username": null, "default_password": "password", "default_password_blank": false, "credential_type": "static", "credential_note": "Wi-Fi 6 (802.11ax) AX5400 dual-band mesh-capable router with a dual-core CPU and detachable antennas. D-Link's Quick Install Guide states a genuine static default: \"You will be asked for your Device/Admin Password. By default this password is 'password'.\" Some revisions' user manuals instead cite a label-printed password, so confidence is medium.", "reset_steps": "Use a paperclip to press and hold the recessed Reset button on the back for longer than 10 seconds to restore the router to default settings.", "source_url": "https://support.dlink.com/resource/PRODUCTS/DIR-X5460/REVA/DIR-X5460_REVA_QIG_v1.10_US.pdf", "source_name": "D-Link DIR-X5460 Quick Installation Guide v1.10 — official PDF", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/d-link-dir-x5460" }, { "slug": "deutsche-telekom-speedport-pro-plus", "brand": "Deutsche Telekom", "model": "Speedport Pro Plus", "category": "router", "default_gateway_ip": "192.168.2.1", "default_login_host": "speedport.ip", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "Distinct from the already-covered Speedport Smart / Smart 4 Plus tier — Telekom's premium hybrid-mesh router. No username field and no admin/admin — login uses a unique per-unit device password (Gerätepasswort) printed on the device label or Routerpass, at http://speedport.ip. Telekom's own help page: 'Bei den Speedport-Routern steht das voreingestellte Gerätepasswort auf der Rückseite oder Unterseite des Gerätes oder dem Routerpass abgedruckt.'", "reset_steps": "Premium hybrid fixed-line router with LTE bonding, mesh-WLAN base station, up to 12 antennas including DECT, 9,700 Mbit/s Wi-Fi class. Reset via the recessed button on the device; credentials revert to the printed Gerätepasswort after reset.", "source_url": "https://www.telekom.de/hilfe/hilfe-bei-stoerungen/persoenliches-kennwort-in-speedport-eintragen", "source_name": "Telekom Hilfe — Persönliches Kennwort in Speedport eintragen (official)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/deutsche-telekom-speedport-pro-plus" }, { "slug": "deutsche-telekom-speedport-smart", "brand": "Deutsche Telekom", "model": "Speedport Smart", "category": "gateway", "default_gateway_ip": "192.168.2.1", "default_login_host": "speedport.ip", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "No universal default. The Speedport Smart uses a device-specific Gerätepasswort printed on the type plate (Typenschild) on the router and in the supplied router pass — there is no login username, only that device password.", "reset_steps": "To log in: connect to the router, browse to http://speedport.ip (or 192.168.2.1) and enter the device password (Gerätepasswort). In the delivery state this is the value printed on the type plate on the base/back of the Speedport (also in the included router pass). To factory reset: with the router on, press and hold the recessed Reset button for at least 7 seconds until the lights flash; the device password returns to the one on the type plate.", "source_url": "https://www.telekom.de/hilfe/geraete/router/speedport/geraetepasswort-wlan-schluessel", "source_name": "Telekom Hilfe — Gerätepasswort und WLAN-Schlüssel (Speedport)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/deutsche-telekom-speedport-smart" }, { "slug": "deutsche-telekom-speedport-smart-3", "brand": "Deutsche Telekom", "model": "Speedport Smart 3", "category": "gateway", "default_gateway_ip": "192.168.2.1", "default_login_host": "speedport.ip", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "Telekom's Wi-Fi 6-era DSL/fibre gateway — an earlier tier than the Speedport Smart 4 Plus already covered. No username and no shared default: the factory Gerätepasswort is unique per unit and login is at speedport.ip (192.168.2.1). Telekom: \"Im Auslieferungszustand entspricht das Gerätepasswort der Angabe auf dem Typenschild Ihres Speedport bzw. der Angabe im mitgelieferten Router-Pass.\"", "reset_steps": "Enter http://speedport.ip or http://192.168.2.1 in a browser and log in with the device password (Gerätepasswort) printed on the unit's type label / Router-Pass. To reset, hold the recessed Reset button with a pin for at least 15 seconds until the factory device password is active again.", "source_url": "https://www.telekom.de/hilfe/downloads/bedienungsanleitung-speedport-smart-3.pdf", "source_name": "Deutsche Telekom Speedport Smart 3 Bedienungsanleitung — official (telekom.de)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/deutsche-telekom-speedport-smart-3" }, { "slug": "deutsche-telekom-speedport-smart-4-plus", "brand": "Deutsche Telekom", "model": "Speedport Smart 4 Plus", "category": "gateway", "default_gateway_ip": null, "default_login_host": "speedport.ip", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "DSL/VDSL and fibre (Glasfaser) capable Telekom gateway with integrated telephony (ships with DSL-Kabel, Glasfaser-Kabel and Telefon-Adapter) and an on-device display. No username field and no admin/admin — login uses a UNIQUE per-unit device password (Gerätepasswort) on the Typenschild and Router-Pass, at http://speedport.ip/.", "reset_steps": "Open http://speedport.ip/ and sign in with the Gerätepasswort printed on the device label (Typenschild) and in the supplied Router-Pass; set your own in the config UI. Use the Neustart/Reset button to return to factory settings.", "source_url": "https://www.telekom.de/hilfe/downloads/kurzanleitung-speedport-smart-4-plus.pdf", "source_name": "Telekom Bedienungsanleitung — Speedport Smart 4 Plus (telekom.de, official)", "source_archive_url": "https://web.archive.org/web/20260729073420/https://www.telekom.de/hilfe/downloads/kurzanleitung-speedport-smart-4-plus.pdf", "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/deutsche-telekom-speedport-smart-4-plus" }, { "slug": "devolo-magic-1-wifi-mini", "brand": "Devolo", "model": "Magic 1 WiFi mini", "category": "mesh", "default_gateway_ip": null, "default_login_host": null, "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "Powerline (500 Mbps HomePlug) plus Wi-Fi 5 add-on adapter, the current entry point of the Magic 1 WiFi line. Gets a DHCP IP with no fixed default address; discovered via devolo Cockpit/app rather than a hostname. Web interface may be protected by a unique password printed on the type label, per the official manual.", "reset_steps": "Press and hold the recessed reset button on the adapter for about 10 seconds until the LEDs flash, or use 'Restore factory settings' in devolo Cockpit or the Home Network App.", "source_url": "https://www.devolo.com/media/e1/97/37/1779437604/Manual_devolo_Magic_1_WiFi_mini_DE_EN_FR_ES_NL_online.pdf", "source_name": "devolo Magic 1 WiFi mini — official user manual", "source_archive_url": "https://web.archive.org/web/20260729073238/https://www.devolo.com/media/e1/97/37/1779437604/Manual_devolo_Magic_1_WiFi_mini_DE_EN_FR_ES_NL_online.pdf", "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/devolo-magic-1-wifi-mini" }, { "slug": "devolo-magic-2-wifi-next", "brand": "Devolo", "model": "Magic 2 WiFi next", "category": "mesh", "default_gateway_ip": null, "default_login_host": null, "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "Wall-plug Powerline (G.hn, up to 2400 Mbps) plus dual-band mesh Wi-Fi 5 adapter (802.11a/b/g/n/ac up to 1200 Mbps, 4 antennas, band steering/roaming), with a pass-through socket and 2x gigabit LAN; sold in devolo's 'Mesh WiFi 2' kits. The built-in web interface has NO default password — assigning a login password is mandatory on first login. No fixed default IP: reach the UI via devolo Cockpit or the Home Network App. The Wi-Fi key (separate from the admin login) is unique and printed on the housing label.", "reset_steps": "Press and hold the Reset button (next to the network jacks) for longer than 10 seconds until the LED flashes white, then disconnect from mains — this restores factory defaults (all settings lost).", "source_url": "https://www.devolo.global/fileadmin/Web-Content/DE/products/hnw/magic-2-wifi-next/documents/en/devolo_Magic_2_WiFi_next_0321_en_online.pdf", "source_name": "devolo — Manual devolo Magic 2 WiFi next (official PDF)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/devolo-magic-2-wifi-next" }, { "slug": "draytek-vigor2135", "brand": "DrayTek", "model": "Vigor2135", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": null, "default_username": "admin", "default_password": "admin", "default_password_blank": false, "credential_type": "static", "credential_note": "Gigabit Ethernet WAN broadband router with no built-in DSL modem — sits behind a separate modem/ONT, DrayTek's entry-level multi-WAN model. Genuine static default admin/admin confirmed in the official quick-start guide.", "reset_steps": "Press and hold the recessed Factory Reset button on the rear panel for about 10 seconds until the ACT LED starts blinking, then release; the router reboots to factory defaults. Browse to http://192.168.1.1 and log in with admin/admin.", "source_url": "https://www.draytek.com/assets/online_manuals/pdf/DrayTek_QS_Vigor2135_RF_V1.1_(01).pdf", "source_name": "DrayTek Vigor2135 Series Quick Start Guide v1.1 (official)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/draytek-vigor2135" }, { "slug": "draytek-vigor2765", "brand": "DrayTek", "model": "Vigor2765", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": null, "default_username": "admin", "default_password": "admin", "default_password_blank": false, "credential_type": "static", "credential_note": "Wired-only VDSL2/ADSL2+ 35b-chipset security router with no built-in Wi-Fi — the base SKU in the Vigor2765 family (the RF/Vac variant adds 802.11ac and VoIP). Genuine static default admin/admin confirmed in the official quick-start guide.", "reset_steps": "Press and hold the recessed Factory Reset button on the rear panel for about 10 seconds until the ACT LED starts blinking, then release; the router reboots to factory defaults. Browse to http://192.168.1.1 and log in with admin/admin.", "source_url": "https://www.draytek.com/assets/online_manuals/pdf/DrayTek_QS_Vigor2765_Wired_V1.8.pdf", "source_name": "DrayTek Vigor2765 35b Series Quick Start Guide v1.8 (official)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/draytek-vigor2765" }, { "slug": "draytek-vigor2865", "brand": "DrayTek", "model": "Vigor2865", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": null, "default_username": "admin", "default_password": "admin", "default_password_blank": false, "credential_type": "static", "credential_note": "VDSL2/ADSL2+ (35b) security firewall router with an integrated DSL modem and, on the RF model, 802.11ac Wi-Fi. Genuine static default admin/admin out of the box; the quick-start guide confirms you set a new password on first login, but admin/admin is the factory credential.", "reset_steps": "With the router powered on (ACT LED blinking), press and hold the recessed Factory Reset hole for more than 5 seconds; when the ACT LED blinks rapidly, release to restart at defaults. Then browse to http://192.168.1.1 and log in.", "source_url": "https://www.draytek.com/assets/online_manuals/pdf/DrayTek_QS_Vigor2865_Wired_V2.0.pdf", "source_name": "DrayTek Vigor2865 Quick Start Guide (official)", "source_archive_url": "https://web.archive.org/web/20260729072251/https://www.draytek.com/assets/online_manuals/pdf/DrayTek_QS_Vigor2865_Wired_V2.0.pdf", "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/draytek-vigor2865" }, { "slug": "draytek-vigor2927", "brand": "DrayTek", "model": "Vigor2927", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": null, "default_username": "admin", "default_password": "admin", "default_password_blank": false, "credential_type": "static", "credential_note": "Dual-WAN Gigabit business security/VPN router — Ethernet WAN only (no DSL modem); the wired SKU has no Wi-Fi (the RF variant adds Wi-Fi 5). DrayTek ships a genuine static default of admin/admin; recent firmware then prompts you to set a new password, but admin/admin is the factory credential you first enter.", "reset_steps": "With the router powered on (ACT LED blinking), press and hold the recessed Factory Reset hole for more than 5 seconds; when the ACT LED blinks rapidly, release and let it restart at factory defaults. Then browse to http://192.168.1.1 and log in.", "source_url": "https://www.draytek.com/assets/online_manuals/pdf/DrayTek_QS_Vigor2927_Wired_V1.82.pdf", "source_name": "DrayTek Vigor2927 Quick Start Guide (official)", "source_archive_url": "https://web.archive.org/web/20260729072244/https://www.draytek.com/assets/online_manuals/pdf/DrayTek_QS_Vigor2927_Wired_V1.82.pdf", "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/draytek-vigor2927" }, { "slug": "draytek-vigor3910", "brand": "DrayTek", "model": "Vigor3910", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": null, "default_username": "admin", "default_password": "admin", "default_password_blank": false, "credential_type": "static", "credential_note": "SMB multi-WAN (4x GbE WAN) security router/firewall built for VPN concentration and load-balancing at the edge — no built-in Wi-Fi or DSL modem, DrayTek's business-tier model above the Vigor2927. Genuine static default admin/admin confirmed in the official quick-start guide.", "reset_steps": "Press and hold the recessed Factory Reset button on the rear panel for about 10 seconds until the ACT LED starts blinking, then release; the router reboots to factory defaults. Browse to http://192.168.1.1 and log in with admin/admin (the system then prompts a password change).", "source_url": "https://www.draytek.com/assets/online_manuals/pdf/DrayTek_QS_Vigor3910_V1.7.pdf", "source_name": "DrayTek Vigor3910 Series Quick Start Guide v1.7 (official)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/draytek-vigor3910" }, { "slug": "draytek-vigorap-903", "brand": "DrayTek", "model": "VigorAP 903", "category": "ap", "default_gateway_ip": "192.168.1.2", "default_login_host": "vigorap.com", "default_username": "admin", "default_password": "admin", "default_password_blank": false, "credential_type": "static", "credential_note": "802.11ac business access point (PoE, wall/ceiling mount) — DrayTek's AP line, a distinct default-IP scheme (.1.2) from the Vigor router family (.1.1) already covered. Official Quick Start Guide: 'Please enter \"admin/admin\" as the Username/Password and click Login.'", "reset_steps": "Press and hold the Factory Reset button for about 10 seconds until the LEDs flash, then release to restore factory defaults. Browse to http://192.168.1.2 (or http://vigorap.com over Wi-Fi) and log in with admin/admin.", "source_url": "https://www.draytek.com/assets/online_manuals/pdf/DrayTek_QS_VigorAP%20903_V2.1.pdf", "source_name": "DrayTek VigorAP 903 802.11ac Access Point Quick Start Guide V2.1 (official)", "source_archive_url": "https://web.archive.org/web/20260729074132/https://www.draytek.com/assets/online_manuals/pdf/DrayTek_QS_VigorAP%20903_V2.1.pdf", "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/draytek-vigorap-903" }, { "slug": "edimax-br-6428ns-v5", "brand": "Edimax", "model": "BR-6428nS V5", "category": "router", "default_gateway_ip": "192.168.2.1", "default_login_host": null, "default_username": "admin", "default_password": "1234", "default_password_blank": false, "credential_type": "static", "credential_note": "N300 (802.11b/g/n, 2.4GHz-only, up to 300 Mbps) entry-level Wi-Fi 4 router/AP/range-extender combo. Wired login at http://192.168.2.1; the official User Manual's Login section and the product-label default table both state a genuine static default of admin / 1234 (a later FAQ line inconsistently prints admin/admin — the label value governs).", "reset_steps": "Press and hold the WPS/Reset button on the back panel for at least 10 seconds until the power LED begins to flash, then release and wait for the router to restart; defaults return to admin / 1234 at http://192.168.2.1.", "source_url": "https://download.edimax.com/mw/cufiles/files/download/manual/BR-6428nS_V5/BR-6428nS_V5_User_Manual_EN.pdf", "source_name": "Edimax BR-6428nS V5 User Manual (v1.3, 08-2021) — download.edimax.com (official)", "source_archive_url": "https://web.archive.org/web/20260729073312/https://download.edimax.com/mw/cufiles/files/download/manual/BR-6428nS_V5/BR-6428nS_V5_User_Manual_EN.pdf", "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/edimax-br-6428ns-v5" }, { "slug": "ee-smart-hub", "brand": "EE", "model": "Smart Hub", "category": "gateway", "default_gateway_ip": "192.168.1.254", "default_login_host": null, "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "There is no admin/admin default. Each EE Smart Hub has a unique admin password printed on the card on the back of the hub, separate from the WiFi password.", "reset_steps": "To log in: connect to the hub, browse to 192.168.1.254 and enter the admin password printed on the card on the back of the hub (this is different from the WiFi password, which is on the same card). To factory reset: with the hub on, press and hold the recessed Reset button on the back for about 20 seconds until it restarts; the network name, WiFi password and admin password revert to the values on the back card.", "source_url": "https://ee.co.uk/help/broadband/manage-use/change-wifi-admin-password", "source_name": "EE Broadband Help — Change the WiFi and admin password on your Hub", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/ee-smart-hub" }, { "slug": "ee-smart-hub-plus", "brand": "EE", "model": "Smart Hub Plus", "category": "gateway", "default_gateway_ip": "192.168.1.254", "default_login_host": null, "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "EE's fibre gateway line (Smart Hub Plus / 6 Plus / 7 Plus) — distinct from the older EE Smart Hub already covered. The Hub Manager admin password is separate from the Wi-Fi password and is printed per-unit on the card on the back; login is at 192.168.1.254 with no username. EE: \"That password is also on the card on the back of the hub.\"", "reset_steps": "Type 192.168.1.254 in the browser address bar and press Enter, then log in with the admin password printed on the card on the back of the hub. A factory reset restores that printed admin password.", "source_url": "https://ee.co.uk/help/broadband/manage-use/change-wifi-admin-password", "source_name": "EE Broadband Help — Change the WiFi Password and Admin Password on Your Hub (official)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/ee-smart-hub-plus" }, { "slug": "eero-6-plus", "brand": "eero", "model": "eero 6+", "category": "mesh", "default_gateway_ip": null, "default_login_host": null, "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "app-only", "credential_note": "App-only. There is no admin web page and no admin/admin default password. The only password is the Wi-Fi password you create in the eero app.", "reset_steps": "eero 6+ is managed only in the eero app. To hard reset: with the eero powered on, hold the reset button on the back until the LED flashes red (~15 seconds), then release; when it blinks blue it is ready to set up. Re-add it in the app and set your Wi-Fi credentials.", "source_url": "https://support.eero.com/hc/en-us/articles/215473703-How-do-I-reboot-or-reset-my-eero", "source_name": "eero Help Center", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/eero-6-plus" }, { "slug": "eero-max-7", "brand": "eero", "model": "eero Max 7", "category": "mesh", "default_gateway_ip": null, "default_login_host": null, "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "app-only", "credential_note": "App-only mesh. No web interface and no factory admin/admin. All configuration, including the Wi-Fi password you pick, lives in the eero app under your Amazon/eero account.", "reset_steps": "There is no browser login for eero — use the eero app. To hard reset: powered on, hold the reset button until the LED flashes red (about 15 seconds), release, and wait for the blue blink. Add the eero back in the app and choose a new Wi-Fi name and password.", "source_url": "https://support.eero.com/hc/en-us/articles/215473703-How-do-I-reboot-or-reset-my-eero", "source_name": "eero Help Center", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/eero-max-7" }, { "slug": "eero-pro-6", "brand": "eero", "model": "eero Pro 6", "category": "mesh", "default_gateway_ip": null, "default_login_host": null, "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "app-only", "credential_note": "App-only — there is no admin web page and no admin/admin default. You create and change the Wi-Fi password in the eero app under Settings > Wifi name & password. There are no separate router login credentials.", "reset_steps": "eero has no web admin page — everything is managed in the eero mobile app. To factory (hard) reset: with the eero powered on, press and hold the reset button on the back until the LED flashes red (about 15 seconds), then release. When the light blinks blue the unit is ready. Reopen the eero app (signed into your Amazon/eero account) and add the eero back to your network; you set the Wi-Fi name and password there.", "source_url": "https://support.eero.com/hc/en-us/articles/215473703-How-do-I-reboot-or-reset-my-eero", "source_name": "eero Help Center", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/eero-pro-6" }, { "slug": "eero-pro-6e", "brand": "eero", "model": "eero Pro 6E", "category": "mesh", "default_gateway_ip": null, "default_login_host": null, "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "app-only", "credential_note": "App-only. No web admin, no default admin/admin. The Wi-Fi password is one you set in the eero app during setup; view or change it under Settings > Wifi name & password.", "reset_steps": "eero is administered only through the eero mobile app. To hard reset: with the unit powered on, hold the reset button on the back until the LED flashes red (~15 seconds), then release. Wait for the light to blink blue, then re-add the eero in the app and set your Wi-Fi name and password.", "source_url": "https://support.eero.com/hc/en-us/articles/215473703-How-do-I-reboot-or-reset-my-eero", "source_name": "eero Help Center", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/eero-pro-6e" }, { "slug": "engenius-standalone-ap", "brand": "EnGenius", "model": "Standalone AP (EWS/ECW series)", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": "EnGenius.local", "default_username": "admin", "default_password": "admin", "default_password_blank": false, "credential_type": "static", "credential_note": "EnGenius documents a static default of admin / admin at 192.168.1.1 for standalone-mode devices and the local access page of cloud APs. Cloud-managed (EnGenius Cloud app) is the primary path for ECW models; the local admin/admin login is for direct setup.", "reset_steps": "For a standalone EnGenius access point, connect a computer to the AP and browse to http://192.168.1.1 (or http://EnGenius.local). If the AP can't find a DHCP server it falls back to 192.168.1.1. Log in with username 'admin' and password 'admin', then change the password. To factory reset, hold the AP's Reset button for about 10 seconds until it reboots, restoring admin/admin.", "source_url": "https://doctorengenius.engeniustech.com/en/articles/6708892-what-is-the-default-ip-username-and-password-for-engenius-devices", "source_name": "Doctor EnGenius Help Center (default IP, username and password)", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/engenius-standalone-ap" }, { "slug": "etisalat-aztech-hw550-3g", "brand": "Etisalat by e&", "model": "Aztech HW550-3G", "category": "gateway", "default_gateway_ip": "192.168.2.1", "default_login_host": null, "default_username": "admin", "default_password": "admin", "default_password_blank": false, "credential_type": "static", "credential_note": "Etisalat's official configuration manual documents http://192.168.2.1 with admin / admin for this e-Life router. This applies to the legacy Aztech HW550-3G; current e& fibre service ships different ONTs whose admin password is typically printed on the device label rather than a universal admin/admin.", "reset_steps": "Connect to the router by LAN or Wi-Fi, open http://192.168.2.1 in a browser, and sign in with username admin and password admin (Etisalat's documented default for this unit). Complete Internet setup with the PPPoE credentials from your e-Life card. To factory reset, hold the recessed RESET button for about 10 seconds until the unit reboots, then log back in at 192.168.2.1 and set a new admin password under System > Password.", "source_url": "https://support.etisalat.ae/en/system/docs/personal/manual/AztechHW550_3G_DetailedConfigurationManual_Normal.pdf", "source_name": "Etisalat UAE — Aztech HW550-3G Configuration Manual", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/etisalat-aztech-hw550-3g" }, { "slug": "firewalla-blue-plus", "brand": "Firewalla", "model": "Blue Plus", "category": "gateway", "default_gateway_ip": null, "default_login_host": null, "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "app-only", "credential_note": "Compact home/small-office firewall/router gateway — the higher-throughput sibling of the base Firewalla Blue, and the first Blue-line SKU in this seed (only Gold and Purple were covered previously). Managed entirely from the Firewalla app; Firewalla's own help center: 'the Web interface is a complementary management interface to the mobile app and is supported on all Firewalla devices Blue and up' — no device login exists.", "reset_steps": "Pairing and factory reset are handled entirely through the Firewalla app; there is no on-box web-admin credential to reset.", "source_url": "https://help.firewalla.com/hc/en-us/articles/4408013495059-Web-Interfaces-for-Firewalla", "source_name": "Firewalla Help Center — Web Interfaces for Firewalla (official)", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/firewalla-blue-plus" }, { "slug": "firewalla-gold", "brand": "Firewalla", "model": "Gold", "category": "gateway", "default_gateway_ip": null, "default_login_host": null, "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "app-only", "credential_note": "Multi-gigabit firewall/router security gateway (Gold Original/Rev B/Plus: 4x 1G routable ports; Gold SE adds 2.5G; Gold Pro adds 10G/2.5G). Managed entirely from the Firewalla iOS/Android app — there is NO web-admin username/password on the box. Setup: install the app, tap +, and pair using the bundled red security dongle. The optional web interface (my.firewalla.com) authenticates through the paired app, not device credentials.", "reset_steps": "Setup/pairing and factory reset are driven from the Firewalla app; the hardware reset varies by model (Gold Pro has a dedicated Reset button, others reset via SD-card reflash) — see Firewalla's 'How to reset Firewalla box' article.", "source_url": "https://help.firewalla.com/hc/en-us/articles/360046669734-Firewalla-Gold-Series-Installation-Guide", "source_name": "Firewalla Help Center — Firewalla Gold Series Installation Guide", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/firewalla-gold" }, { "slug": "firewalla-purple", "brand": "Firewalla", "model": "Purple", "category": "gateway", "default_gateway_ip": null, "default_login_host": null, "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "app-only", "credential_note": "Gigabit firewall/router security gateway with dual-band Wi-Fi. Managed entirely from the Firewalla iOS/Android app — there is NO on-box web login. Setup and pairing are done in the app; the complementary web interface (my.firewalla.com), supported on Firewalla Blue and up, authenticates via the paired mobile app rather than device credentials.", "reset_steps": "Pairing and factory reset are handled through the Firewalla app; see Firewalla's 'How to reset Firewalla box' article for the hardware reset procedure.", "source_url": "https://help.firewalla.com/hc/en-us/articles/4408013495059-Web-Interfaces-for-Firewalla", "source_name": "Firewalla Help Center — Web Interfaces for Firewalla", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/firewalla-purple" }, { "slug": "free-freebox", "brand": "Free", "model": "Freebox (Freebox OS)", "category": "gateway", "default_gateway_ip": null, "default_login_host": "mafreebox.freebox.fr", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "Fibre/xDSL gateway (Freebox Server) with integrated telephony, managed via Freebox OS. No factory admin/admin: on first connection the user creates their own administrator password, gated by a physical confirmation on the Freebox Server itself. Login is by that user-set password at mafreebox.freebox.fr.", "reset_steps": "From a device connected to the Freebox, go to http://mafreebox.freebox.fr/ and click Première connexion, then define your own administrator password (physical confirmation on the Freebox Server is required). If lost, use J'ai perdu mon mot de passe, which also requires physical validation on the box.", "source_url": "https://assistance.free.fr/articles/468", "source_name": "Assistance Free — Freebox OS : accéder à Freebox OS depuis mon domicile (official)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/free-freebox" }, { "slug": "frontier-fiberoptic-router", "brand": "Frontier", "model": "FiberOptic / Arris NVG Router", "category": "gateway", "default_gateway_ip": "192.168.1.1", "default_login_host": "192.168.1.1", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "Frontier routers (Arris/Sagemcom FiberOptic gateways) print the admin password on the device label — it varies by unit and model, so there is no single universal default. Older Frontier DSL units used admin/password, but fiber gateways rely on the label value.", "reset_steps": "Open a browser to http://192.168.1.1 (some models use 192.168.254.254). The Admin Username is usually 'admin' and the Admin Password is printed on the label on the side/bottom of the router. To factory reset, press and hold the recessed Reset button ~10-15 seconds until the router restarts, then sign in with the credentials on the label.", "source_url": "https://frontier.com/helpcenter/internet/change-wifi-network-name-and-password", "source_name": "Frontier Help Center — Change Your Wi-Fi Network Name and Password", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/frontier-fiberoptic-router" }, { "slug": "gl-inet-gl-mt3000-beryl-ax", "brand": "GL.iNet", "model": "Beryl AX (GL-MT3000)", "category": "router", "default_gateway_ip": "192.168.8.1", "default_login_host": null, "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "Beryl AX (GL-MT3000) is GL.iNet's pocket travel router. No admin password is shipped with it — the first page at 192.168.8.1 asks you to create one. The wireless name and key on its label are unique to that unit, not a universal pair.", "reset_steps": "Reset: with the router powered on, press and hold the RESET button for about 10 seconds until the LEDs flash, then release and wait for reboot. Rejoin the label's wireless network, open 192.168.8.1, pick a language, and create your admin password.", "source_url": "https://docs.gl-inet.com/router/en/4/user_guide/gl-mt3000/", "source_name": "GL.iNet Official Docs - Beryl AX (GL-MT3000) User Guide", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/gl-inet-gl-mt3000-beryl-ax" }, { "slug": "gl-inet-gl-ax1800-flint", "brand": "GL.iNet", "model": "Flint (GL-AX1800)", "category": "router", "default_gateway_ip": "192.168.8.1", "default_login_host": null, "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "Flint (GL-AX1800) is the desktop model in the range. It arrives without an admin password; your first visit to 192.168.8.1 requires you to make one, at least 5 characters. Its bottom label prints a per-device wireless name and key, which is a separate thing entirely.", "reset_steps": "Reset: with power on, keep RESET depressed near 10 seconds until the LEDs flash, then let go and allow the reboot. Reconnect over the wireless network from the bottom label, go to 192.168.8.1, choose a language, and enter an admin password of your own.", "source_url": "https://docs.gl-inet.com/router/en/4/user_guide/gl-ax1800/", "source_name": "GL.iNet Official Docs - Flint (GL-AX1800) User Guide", "source_archive_url": "https://web.archive.org/web/20260727084336/https://docs.gl-inet.com/router/en/4/user_guide/gl-ax1800/", "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/gl-inet-gl-ax1800-flint" }, { "slug": "gl-inet-gl-mt6000-flint-2", "brand": "GL.iNet", "model": "Flint 2 (GL-MT6000)", "category": "router", "default_gateway_ip": "192.168.8.1", "default_login_host": null, "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "The Flint 2 is GL.iNet's AX6000 WiFi 6 router with 2.5 Gbps WAN/LAN ports. Official docs state the admin panel has no default password — you create your own (minimum 5 characters) at first login on 192.168.8.1. Login is password-only with no username, separate from the Wi-Fi key.", "reset_steps": "Hold the physical RESET button about 10 seconds until the LED flashes to restore factory defaults, then browse to 192.168.8.1 and set a new admin password.", "source_url": "https://docs.gl-inet.com/router/en/4/user_guide/gl-mt6000/", "source_name": "GL.iNet official router docs (GL-MT6000)", "source_archive_url": "https://web.archive.org/web/20260727124436/https://docs.gl-inet.com/router/en/4/user_guide/gl-mt6000/", "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/gl-inet-gl-mt6000-flint-2" }, { "slug": "gl-inet-gl-axt1800-slate-ax", "brand": "GL.iNet", "model": "Slate AX (GL-AXT1800)", "category": "router", "default_gateway_ip": "192.168.8.1", "default_login_host": null, "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "Slate AX (GL-AXT1800) is the AX1800-class travel unit. Nothing is preset on it: 192.168.8.1 opens a create-password step before any settings appear. The SSID and key on the bottom sticker differ per device and are not the admin credential.", "reset_steps": "Reset: hold RESET for roughly 10 seconds while the unit is powered, release once the LEDs flash, and let it restart. Attach to the sticker's wireless network, load 192.168.8.1, select a language, and define the admin password you want.", "source_url": "https://docs.gl-inet.com/router/en/4/user_guide/gl-axt1800/", "source_name": "GL.iNet Official Docs - Slate AX (GL-AXT1800) User Guide", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/gl-inet-gl-axt1800-slate-ax" }, { "slug": "google-nest-wifi", "brand": "Google", "model": "Nest Wifi / Google Wifi", "category": "mesh", "default_gateway_ip": null, "default_login_host": null, "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "app-only", "credential_note": "App-only: setup and management are entirely through the Google Home app. There is NO web admin page, NO default IP login, and NO default username/password.", "reset_steps": "Factory reset via the Google Home app (Wi-Fi › Settings › Factory reset network), or hold the factory-reset button on the point until the light pulses.", "source_url": "https://support.google.com/googlenest/answer/9548301", "source_name": "Google Nest Help — Set up Nest Wifi", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/google-nest-wifi" }, { "slug": "google-nest-wifi-pro", "brand": "Google", "model": "Nest Wifi Pro", "category": "mesh", "default_gateway_ip": null, "default_login_host": null, "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "app-only", "credential_note": "App-only via the Google Home app. There is no admin/admin default; you create the network name and password during setup. Nest Wifi Pro cannot be mixed in a mesh with older Nest Wifi or Google Wifi points.", "reset_steps": "Nest Wifi Pro has no web admin — it is set up and managed in the Google Home app. To factory reset the router: press and hold the factory reset button on the bottom for about 10 seconds; the light flashes yellow, then turns solid yellow — release the button. The reset can take up to 10 minutes; do not unplug during it. Then open the Google Home app and set the device up again (you pick a new network name and password).", "source_url": "https://support.google.com/googlehome/answer/6246619?hl=en", "source_name": "Google Nest Help", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/google-nest-wifi-pro" }, { "slug": "grandstream-gwn7052", "brand": "Grandstream", "model": "GWN7052", "category": "router", "default_gateway_ip": "192.168.80.1", "default_login_host": null, "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "Dual-band 802.11ac (Wi-Fi 5) gigabit VPN router (GWN7052; GWN7052F is the SFP/fibre variant) — 1x gigabit WAN plus gigabit LAN, standalone or GWN.Cloud managed. The default admin password is UNIQUE per unit and printed on the MAC tag — not a static admin/admin — and a password change is forced at first boot.", "reset_steps": "Browse to https://192.168.80.1 and log in with admin plus the default password printed on the MAC/label sticker on the unit; at first boot or after a factory reset you are required to set new admin and user passwords before the web UI loads.", "source_url": "https://documentation.grandstream.com/knowledge-base/gwn70xx-user-manual/", "source_name": "Grandstream GWN7062 & GWN7052/F User Manual — documentation.grandstream.com (official)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/grandstream-gwn7052" }, { "slug": "grandstream-gwn7062", "brand": "Grandstream", "model": "GWN7062", "category": "router", "default_gateway_ip": "192.168.80.1", "default_login_host": null, "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "Dual-band Wi-Fi 6 VPN/security router in the GWN70x2 line — a distinct, higher-throughput model from the GWN7052 already covered, sharing the same default IP scheme. Official documentation: 'the default administrator's username is \"admin\" and the default password is printed on the MAC tag of the unit' — forced change on first boot or after a factory reset.", "reset_steps": "Press and hold the reset button for about 10 seconds until the unit reboots to factory defaults, then browse to https://192.168.80.1 and log in with 'admin' plus the unique password printed on the MAC tag of the unit.", "source_url": "https://documentation.grandstream.com/knowledge-base/gwn70xx-user-manual/", "source_name": "Grandstream GWN7062 & GWN7052/F User Manual — documentation.grandstream.com (official)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/grandstream-gwn7062" }, { "slug": "grandstream-gwn7660", "brand": "Grandstream", "model": "GWN7660", "category": "ap", "default_gateway_ip": null, "default_login_host": null, "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "802.11ax 2x2 Wi-Fi 6 ceiling/wall access point in the GWN76xx line, DHCP/discovery-based rather than a fixed static IP — distinct form factor from the GWN70x2 routers. Official Quick Installation Guide: 'The default administrator username is \"admin\" and the default random password can be found at the sticker on the GWN7660.'", "reset_steps": "Press and hold the reset button until the unit reboots to factory defaults. Discover it via the GWN Discovery Tool or https://gwn_.local/, then log in with 'admin' plus the random password printed on the unit's sticker.", "source_url": "https://documentation.grandstream.com/knowledge-base/gwn7660-quick-installation-guide/", "source_name": "Grandstream GWN7660 Quick Installation Guide — documentation.grandstream.com (official)", "source_archive_url": "https://web.archive.org/web/20260729074046/https://documentation.grandstream.com/knowledge-base/gwn7660-quick-installation-guide/", "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/grandstream-gwn7660" }, { "slug": "grandstream-gwn7664", "brand": "Grandstream", "model": "GWN7664", "category": "ap", "default_gateway_ip": null, "default_login_host": "gwn_.local", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "Enterprise 802.11ax Wi-Fi 6 AP — dual-band 4x4:4 MU-MIMO, DL/UL OFDMA, up to 512 clients, 2.5G + 1G PoE/PoE+. In standalone mode, reach it at https://gwn_.local; the username is admin with a UNIQUE random default password on the device sticker (not a shared static default). Grandstream: \"The default administrator username is 'admin' and the default random password can be found on the sticker on the GWN7664.\"", "reset_steps": "Hold the physical Reset button ~7 seconds until the LEDs flash to restore factory defaults; the per-device random default password on the sticker then applies again.", "source_url": "https://documentation.grandstream.com/knowledge-base/gwn7664-quick-installation-guide/", "source_name": "Grandstream GWN7664 Quick Installation Guide (official)", "source_archive_url": "https://web.archive.org/web/20231206041200/https://documentation.grandstream.com/knowledge-base/gwn7664-quick-installation-guide/", "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/grandstream-gwn7664" }, { "slug": "huawei-wifi-ax3", "brand": "Huawei", "model": "WiFi AX3 (WS7100/WS7200)", "category": "router", "default_gateway_ip": "192.168.3.1", "default_login_host": null, "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "No universal default — the management password is set on first setup (or printed on the nameplate for WPS-initiated setup).", "reset_steps": "With a pin, hold the recessed RESET button until the indicator light goes out/blinks, then wait for the router to restart to factory defaults.", "source_url": "https://consumer.huawei.com/en/support/content/en-us15902572/", "source_name": "Huawei official support (router web management login)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/huawei-wifi-ax3" }, { "slug": "huawei-wifi-ws5200", "brand": "Huawei", "model": "WiFi WS5200", "category": "router", "default_gateway_ip": "192.168.3.1", "default_login_host": null, "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "No universal default — set on first setup; default gateway 192.168.3.1.", "reset_steps": "With a pin, hold the recessed RESET button until the indicator light goes out/blinks, then wait for the router to restart to factory defaults.", "source_url": "https://consumer.huawei.com/en/support/wireless-routers/ws5200/", "source_name": "Huawei WiFi WS5200 official support page", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/huawei-wifi-ws5200" }, { "slug": "iinet-technicolor-tg789", "brand": "iiNet", "model": "Technicolor TG-789 Broadband Gateway", "category": "gateway", "default_gateway_ip": "10.1.1.1", "default_login_host": null, "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "iiNet's Technicolor TG-789vac v2 VDSL2/ADSL2+ gateway (802.11ac dual-band, built-in VoIP phone ports). Username is admin; the admin password is UNIQUE per unit, printed under 'GUI Login' on the barcode sticker — the sample values in iiNet's guide are not a shared default.", "reset_steps": "Browse to http://10.1.1.1 and log in with username admin and the default password shown under 'GUI Login' on the modem's barcode sticker. To reset, hold the recessed reset button about 10 seconds until the modem restarts, then log in again with the sticker password.", "source_url": "https://help.iinet.net.au/sites/default/files/2020-02/DES-10210_ii_QSG_Technicolor_TG789_Standard_MAR20_WEB.pdf", "source_name": "iiNet TG789 Broadband Gateway Quick Setup Guide (help.iinet.net.au, official)", "source_archive_url": "https://web.archive.org/web/20240901111826/https://help.iinet.net.au/sites/default/files/2020-02/DES-10210_ii_QSG_Technicolor_TG789_Standard_MAR20_WEB.pdf", "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/iinet-technicolor-tg789" }, { "slug": "jio-jiofiber", "brand": "Jio", "model": "JioFiber Router", "category": "gateway", "default_gateway_ip": null, "default_login_host": null, "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "app-only", "credential_note": "Jio's official support does not publish any web admin username/password — JioFiber is administered entirely through the MyJio / JioHome mobile apps. Any 'admin/admin' login shown on aggregator sites does not reflect how Jio documents managing the unit.", "reset_steps": "JioFiber is managed from the MyJio app, not a web admin page. Open MyJio, sign in with your JioFiber number, choose your Fiber account, and change the Wi-Fi name/password under the device / Wi-Fi settings (JioAirFiber uses the JioHome app with mobile number + OTP). To hard reset the ONT, hold the recessed RESET pinhole on the back for about 10 seconds until it reboots, then reconfigure Wi-Fi from the app. There is no admin/admin web login to sign into.", "source_url": "https://www.jio.com/help/faq/jiofiber/manage-jiofiber/device/how-to-change-jiofiber-router-wifissid-password-received-with-jiofiber-connection/", "source_name": "Jio Help — Change JioFiber Router (Wi-Fi/SSID) password", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/jio-jiofiber" }, { "slug": "keenetic-giga-kn-1011", "brand": "Keenetic", "model": "Keenetic Giga (KN-1011)", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": "my.keenetic.net", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "AX1800 dual-band Wi-Fi 6 mesh router; 5x 1GbE ports (4x RJ-45 + 1 combo RJ-45/SFP), USB 2.0 + USB 3.0. Sold as 'Giga' (KN-1011) in the EAEU/CIS market and as 'Hero' globally — identical hardware. No factory-default admin password: the web setup wizard forces you to set the 'admin' account password on first run.", "reset_steps": "Press and hold the Reset button ~10-12 seconds until the status LED starts flashing, then release to restore factory defaults. Reconnect, open my.keenetic.net (or 192.168.1.1), and the Initial Setup Wizard requires you to create the admin password before proceeding.", "source_url": "https://support.keenetic.com/hero/kn-1011/en/13521-initial-setup-wizard.html", "source_name": "Keenetic Support (support.keenetic.com)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/keenetic-giga-kn-1011" }, { "slug": "keenetic-hopper-kn-3811", "brand": "Keenetic", "model": "Keenetic Hopper (KN-3811)", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": "my.keenetic.net", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "AX3000 dual-band Wi-Fi 6 gigabit mesh router (574 Mbps 2.4GHz + 2402 Mbps 5GHz), 4x 1GbE ports, USB 3.0, with MU-MIMO, beamforming and OFDMA. No factory-default admin password: the setup wizard forces creation of the 'admin' account password on first run.", "reset_steps": "Press and hold the Reset button ~10-12 seconds until the status LED starts flashing, then release to restore factory defaults. Reconnect and open my.keenetic.net (or 192.168.1.1); the Initial Setup Wizard requires you to create the admin password before continuing.", "source_url": "https://support.keenetic.com/hopper/kn-3811/en/13521-initial-setup-wizard.html", "source_name": "Keenetic Support (support.keenetic.com)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/keenetic-hopper-kn-3811" }, { "slug": "keenetic-peak", "brand": "Keenetic", "model": "Keenetic Peak (KN-2710)", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": "my.keenetic.net", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "9x GbE + 1x SFP mesh Wi-Fi 5 (AC2600) router with USB 2.0/3.0 ports, dual-core MediaTek CPU — Keenetic's previous-generation flagship before the Wi-Fi 7 Titan line. No factory-default admin password: the setup wizard forces creation of the 'admin' account password on first run.", "reset_steps": "Press and hold the recessed Reset button with a paperclip for about 10-12 seconds until the Status LED begins flashing rapidly, then release; this clears the admin password and all settings and restarts the Initial Setup Wizard.", "source_url": "https://support.keenetic.com/peak/kn-2710/en/31751-what-login-and-password-do-i-need-to-enter-in-the-app-.html", "source_name": "Keenetic Support — Peak (KN-2710): What login and password do I need to enter in the app?", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/keenetic-peak" }, { "slug": "keenetic-titan", "brand": "Keenetic", "model": "Keenetic Titan (KN-1812)", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": "my.keenetic.net", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "Wi-Fi 7 (BE7200) mesh multi-gigabit router with USB 3.2/2.0 ports — Keenetic's current flagship, successor to the Peak/Ultra AC2600 line. No factory-default admin password: the setup wizard forces creation of the 'admin' account password on first run.", "reset_steps": "Press and hold the recessed Reset button with a paperclip for about 10-12 seconds until the Status LED begins flashing rapidly, then release; this clears the admin password and all settings and restarts the Initial Setup Wizard.", "source_url": "https://support.keenetic.com/titan/kn-1812/en/13520-web-interface.html", "source_name": "Keenetic Support — Titan (KN-1812): Web Interface", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/keenetic-titan" }, { "slug": "keenetic-viva-kn-1912", "brand": "Keenetic", "model": "Keenetic Viva (KN-1912)", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": "my.keenetic.net", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "AC1300 dual-band Wi-Fi 5 mesh router; 5x Gigabit Ethernet ports and two USB ports. Sold as 'Viva' (KN-1912) in the EAEU/CIS market and as 'Skipper' globally — identical hardware. No factory-default admin password: the setup wizard forces creation of the 'admin' account password on first run.", "reset_steps": "Press and hold the Reset button ~10-12 seconds until the status LED starts flashing, then release to restore factory defaults. Reconnect and open my.keenetic.net (or 192.168.1.1); the Initial Setup Wizard requires you to create the admin password before continuing.", "source_url": "https://support.keenetic.com/skipper/kn-1912/en/13521-initial-setup-wizard.html", "source_name": "Keenetic Support (support.keenetic.com)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/keenetic-viva-kn-1912" }, { "slug": "kinetic-windstream-actiontec-t3200", "brand": "Kinetic by Windstream", "model": "Actiontec T3200 / T3260 / T3280 / T4220", "category": "gateway", "default_gateway_ip": "192.168.254.254", "default_login_host": "192.168.254.254", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "VDSL/bonded-VDSL/fiber wireless gateway family (OEM: Actiontec) issued by Kinetic by Windstream — note the unusual 192.168.254.254 admin address. Username is admin; the password is unique per unit on the side sticker. Windstream: \"Password: The password is located on a sticker on the side of the modem ... different on every single T3200/T3260/T3280/T4220 modem.\"", "reset_steps": "Factory-reset via the reset button on the modem; after reset, log in at http://192.168.254.254 with the admin password printed on the side-label sticker (unique per unit).", "source_url": "https://www.gokinetic.com/support/internet-security/faq-t3200-t3260-t3280-t4220-kinetic-by-windstream", "source_name": "Kinetic by Windstream — official support FAQ (Actiontec T3200/T3260/T3280/T4220)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/kinetic-windstream-actiontec-t3200" }, { "slug": "kinetic-windstream-zyxel-vmg4927-b50a", "brand": "Kinetic by Windstream", "model": "Zyxel VMG4927-B50A", "category": "gateway", "default_gateway_ip": "192.168.1.1", "default_login_host": "192.168.1.1", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "VDSL/ADSL dual-band wireless gateway (OEM: Zyxel) issued by Kinetic by Windstream. Username is admin; the admin password is unique to each unit and printed on the bottom sticker — not a shared default. Windstream: \"The customer can enter the Administrator Password which is located on the sticker on the bottom of the modem. This password is different on every single VMG4927.\"", "reset_steps": "Factory-reset via the recessed reset button on the device; after reset, log in with the Administrator Password on the bottom-label sticker (unique per unit).", "source_url": "https://www.gokinetic.com/support/internet-security/faq-zyxel-vmg4927-b50a-kinetic-by-windstream", "source_name": "Kinetic by Windstream — official support FAQ (Zyxel VMG4927-B50A)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/kinetic-windstream-zyxel-vmg4927-b50a" }, { "slug": "linksys-e5600", "brand": "Linksys", "model": "E5600 (AC1200 Dual-Band)", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": "myrouter.local", "default_username": null, "default_password": "admin", "default_password_blank": false, "credential_type": "static", "credential_note": "No admin/admin: the documented default password is 'admin' with no username. The E5600 uses a plain http:// connection (unlike the HTTPS-only E7350/E8450). You should set your own password at first login.", "reset_steps": "Hold the Reset button on the bottom for about 10 seconds until the lights flash, then release to restore factory defaults. Browse to http://myrouter.local (or http://192.168.1.1, or http://192.168.11.1 if connected behind an existing network) and log in with the default password 'admin'.", "source_url": "https://support.linksys.com/kb/article/378-en/", "source_name": "Linksys Official Support — Log in to the Dual-Band WiFi Router's web interface", "source_archive_url": "https://web.archive.org/web/20260729065116/https://support.linksys.com/kb/article/378-en/", "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/linksys-e5600" }, { "slug": "linksys-e7350", "brand": "Linksys", "model": "E7350 (AX1800 WiFi 6)", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": "myrouter.local", "default_username": null, "default_password": "admin", "default_password_blank": false, "credential_type": "static", "credential_note": "No admin/admin: the default web-UI password is 'admin' with no username field. Newer firmware forces an HTTPS connection, so an http:// address will not load the login page.", "reset_steps": "Hold the Reset button on the bottom for about 10 seconds until the lights flash, then release to restore factory defaults. Current firmware requires HTTPS: browse to https://myrouter.local (or https://192.168.1.1, or https://192.168.10.1 if it is behind an upstream connection) and log in with the default password 'admin'.", "source_url": "https://support.linksys.com/kb/article/378-en/", "source_name": "Linksys Official Support — Log in to the Dual-Band WiFi Router's web interface", "source_archive_url": "https://web.archive.org/web/20260729065116/https://support.linksys.com/kb/article/378-en/", "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/linksys-e7350" }, { "slug": "linksys-e8450", "brand": "Linksys", "model": "E8450 (AX3200 WiFi 6)", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": "myrouter.local", "default_username": null, "default_password": "admin", "default_password_blank": false, "credential_type": "static", "credential_note": "No admin/admin: the router's default web-interface password is 'admin' with no username. Latest firmware forces HTTPS, so use https:// (an http:// URL will fail). You are expected to set your own password on first login.", "reset_steps": "Hold the Reset button on the bottom for about 10 seconds until the lights flash, then release and let it reboot to factory defaults. On current firmware an HTTPS connection is required: browse to https://myrouter.local (or https://192.168.1.1, or https://10.0.0.1 if the router sits behind another gateway) and log in with the default password 'admin'.", "source_url": "https://support.linksys.com/kb/article/378-en/", "source_name": "Linksys Official Support — Log in to the Dual-Band WiFi Router's web interface", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/linksys-e8450" }, { "slug": "linksys-e9450", "brand": "Linksys", "model": "E9450", "category": "router", "default_gateway_ip": "192.168.79.1", "default_login_host": "192.168.79.1", "default_username": "admin", "default_password": "admin", "default_password_blank": false, "credential_type": "static", "credential_note": "AX5400 dual-band Wi-Fi 6 standalone router (non-mesh) that uses a non-standard default LAN IP (192.168.79.1) rather than the common 192.168.1.1 — distinct from the Velop mesh SKUs already covered. Linksys's own FAQ: the default IP is 192.168.79.1, and admin is the default username and password.", "reset_steps": "Press and hold the reset button at the back of the router for 10 seconds, then release — the power light turns off and starts blinking blue as it restores factory defaults.", "source_url": "https://support.linksys.com/kb/article/3762-en/", "source_name": "Linksys Support — Linksys E9450 FAQs (official)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/linksys-e9450" }, { "slug": "linksys-ea7500", "brand": "Linksys", "model": "EA7500 (Max-Stream AC1900)", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": "myrouter.local", "default_username": "admin", "default_password": "admin", "default_password_blank": false, "credential_type": "static", "credential_note": "Official Linksys default is admin. The Smart Wi-Fi setup wizard prompts you to change it; a Recovery Key on the label is used for recovery.", "reset_steps": "With a pin, hold the Reset button 10 seconds until the light blinks, then release (or power-cycle for 30 seconds).", "source_url": "https://support.linksys.com/kb/article/378-en/", "source_name": "Linksys official Support Article 378", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/linksys-ea7500" }, { "slug": "linksys-hydra-pro-6e-mr7500", "brand": "Linksys", "model": "Hydra Pro 6E / MR7500 (AXE6600 Tri-Band Mesh)", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": "myrouter.local", "default_username": null, "default_password": "admin", "default_password_blank": false, "credential_type": "static", "credential_note": "No admin/admin: Linksys documents the default administrative password of an unconfigured router as 'admin' with no username. The label's unique password is the WiFi key, not the admin login. Setup normally forces you to create your own admin password.", "reset_steps": "Hold the Reset button for 11 seconds; watch for three slow red pulses and release the button on the fourth red pulse — the router reboots to factory defaults. Reconnect to the default WiFi (LinksysSetupXXX, unique WiFi password on the node's label) and set it up in the Linksys app, or log in at http://192.168.1.1 with the admin password. (Software reset: web UI > Router Settings > Troubleshooting > Diagnostics > Factory reset.)", "source_url": "https://support.linksys.com/kb/article/630-en/", "source_name": "Linksys Official Support — Hydra Pro 6E, MR7500 FAQs", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/linksys-hydra-pro-6e-mr7500" }, { "slug": "linksys-mr9000", "brand": "Linksys", "model": "MAX-STREAM MR9000 (AC3000)", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": "myrouter.local", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "app-only", "credential_note": "MAX-STREAM AC3000 tri-band Wi-Fi 5 mesh-capable router. App-driven setup creates a secure admin password automatically — there is no static default; a Recovery Key on the label is used for recovery. Web access via myrouter.local or https://192.168.1.1. Linksys: \"We created a secure admin password during setup.\"", "reset_steps": "Change the admin password in Linksys app > Router Administration > Change Router Password. Full factory reset: hold the Reset button until the top light blinks red, releasing when it turns bright red.", "source_url": "https://downloads.linksys.com/support/assets/userguide/MR9000_USERGUIDE_INTL.pdf", "source_name": "Linksys MR9000 User Guide — official PDF", "source_archive_url": "https://web.archive.org/web/20260809221602/https://downloads.linksys.com/support/assets/userguide/MR9000_USERGUIDE_INTL.pdf", "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/linksys-mr9000" }, { "slug": "linksys-mr7350", "brand": "Linksys", "model": "MR7350 (MAX-STREAM AX1800 Mesh WiFi 6)", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": "myrouter.local", "default_username": null, "default_password": "admin", "default_password_blank": false, "credential_type": "static", "credential_note": "There is no admin/admin here: the documented default administrator password of an unconfigured MR7350 is literally 'admin' (no username). The unique password printed on the bottom label is the WiFi password, not the admin password. Linksys prompts you to set your own admin password during app setup.", "reset_steps": "Press and hold the Reset button on the bottom of the router for about 10 seconds until the lights indicate a reset, then release and let it reboot to factory defaults. Reconnect to the default WiFi (_LinksysSetupXXX, using the unique WiFi password on the bottom label) or plug in by Ethernet, then finish setup in the Linksys app, or log in at http://192.168.1.1 with the admin password. If you forgot a changed password, use the 5-digit recovery code on the product label.", "source_url": "https://support.linksys.com/kb/article/367-en/", "source_name": "Linksys Official Support — MR7350 FAQs", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/linksys-mr7350" }, { "slug": "linksys-velop-mx", "brand": "Linksys", "model": "Velop (MX-series mesh)", "category": "mesh", "default_gateway_ip": "192.168.1.1", "default_login_host": "myrouter.local", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "app-only", "credential_note": "App-first setup (Linksys app). No universal web default — the admin password is created during setup; a Recovery Key printed on the device label is used for recovery. Login is password-only (no username).", "reset_steps": "Hold the Reset button on the bottom of the node ~10 seconds until the light turns red, then release to restore factory defaults.", "source_url": "https://support.linksys.com/kb/article/107-en/", "source_name": "Linksys official Support Article 107", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/linksys-velop-mx" }, { "slug": "linksys-velop-pro-6e-mx6200", "brand": "Linksys", "model": "Velop Pro 6E (MX6200)", "category": "mesh", "default_gateway_ip": "192.168.1.1", "default_login_host": "myrouter.local", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "app-only", "credential_note": "Velop Pro 6E tri-band Wi-Fi 6E Cognitive Mesh node. App-driven setup via the Linksys app — there is NO preset default admin password; the app auto-generates one, and recovery uses the Recovery Key on the label. Web access via myrouter.local or https://192.168.1.1. Linksys: \"the app will automatically generate a password to secure your node.\"", "reset_steps": "Recovery uses the Reset Password / Recovery Key printed on the node's product label. Full factory reset: hold the Reset button on the bottom of the node until the light blinks red.", "source_url": "https://support.linksys.com/kb/article/336-en/", "source_name": "Linksys MX6200 Velop Pro 6E FAQs (official support)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/linksys-velop-pro-6e-mx6200" }, { "slug": "linksys-velop-pro-7-mbe7000", "brand": "Linksys", "model": "Velop Pro 7 (MBE7000)", "category": "mesh", "default_gateway_ip": "192.168.1.1", "default_login_host": "LinksysSmartWiFi.com", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "app-only", "credential_note": "Wi-Fi 7 (802.11be) tri-band BE11000 mesh system — a Wi-Fi 7 tier above the AC-class Velop MX already covered. App-first setup via the Linksys app; each node ships with a unique Wi-Fi password and Recovery Key on its underside label. Linksys: \"The default administrative password automatically changes to an unknown password if the router has been set up with the Linksys app.\"", "reset_steps": "Press and hold the Reset button on the bottom of the node until the light turns red, then set up again via the Linksys app. If the admin password is unknown, use the Recovery Key on the node's label to customize a new one.", "source_url": "https://support.linksys.com/kb/article/335-en/", "source_name": "Linksys Support Article 335 — MBE7000 Velop Pro 7 FAQs (official)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/linksys-velop-pro-7-mbe7000" }, { "slug": "linksys-wrt3200acm", "brand": "Linksys", "model": "WRT3200ACM", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": "myrouter.local", "default_username": "admin", "default_password": "admin", "default_password_blank": false, "credential_type": "static", "credential_note": "Local admin default is admin per official docs; the setup wizard prompts changing it and a Recovery Key on the label is used for recovery.", "reset_steps": "Hold the Reset button 10 seconds until the power LED flashes to restore factory settings.", "source_url": "https://downloads.linksys.com/downloads/userguide/WRT3200ACM__UG_International.pdf", "source_name": "Linksys official WRT3200ACM User Guide", "source_archive_url": "https://web.archive.org/web/20260729065105/https://downloads.linksys.com/downloads/userguide/WRT3200ACM__UG_International.pdf", "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/linksys-wrt3200acm" }, { "slug": "linksys-wrt54g", "brand": "Linksys", "model": "WRT54G", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": null, "default_username": null, "default_password": "admin", "default_password_blank": false, "credential_type": "static", "credential_note": "The official Linksys user guide documents a genuine universal default: leave the username blank and use admin as the password. This is one of the few classic models with a true factory default (not admin/admin) — Linksys recommends changing it immediately from Administration > Management.", "reset_steps": "Open a browser and go to http://192.168.1.1. When the login box appears, leave the User Name blank and enter admin as the password (lowercase). To factory reset, press and hold the Reset button on the back with a paperclip for about 15 seconds until the front lights flash, then release and wait for the router to reboot; the login returns to blank username / admin password.", "source_url": "https://downloads.linksys.com/downloads/userguide/WRT54G_UG_WEB_20070529.pdf", "source_name": "Linksys WRT54G User Guide (official PDF)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/linksys-wrt54g" }, { "slug": "mercusys-halo-h50g", "brand": "Mercusys", "model": "Halo H50G (mesh)", "category": "mesh", "default_gateway_ip": "192.168.68.1", "default_login_host": "mwlogin.net", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "app-only", "credential_note": "Halo mesh is set up via the MERCUSYS app; the web page at mwlogin.net signs in with the MERCUSYS ID / password you created during app setup. There is no admin/admin default.", "reset_steps": "Reset a Halo unit: press and hold its RESET button for about 10 seconds until the LED changes, then release and wait for reboot. Reconfigure through the MERCUSYS app; the web page (mwlogin.net or LAN IP 192.168.68.1) signs in with the app credentials you created.", "source_url": "https://www.mercusys.com/en/faq-252/", "source_name": "Mercusys Official - How to log in to the web management page of Halo", "source_archive_url": "https://web.archive.org/web/20260729071503/https://www.mercusys.com/en/faq-252/", "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/mercusys-halo-h50g" }, { "slug": "mercusys-halo-h70x", "brand": "Mercusys", "model": "Halo H70X (AX1800)", "category": "mesh", "default_gateway_ip": "192.168.1.1", "default_login_host": "mwlogin.net", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "app-only", "credential_note": "AX1800 mesh configured through the MERCUSYS app with a Mercusys ID — no generic default login. The web page at mwlogin.net signs in with that Mercusys ID password. Gateway 192.168.1.1 is Mercusys's standard default (not model-confirmed).", "reset_steps": "Reset from within the MERCUSYS app, or hold the Reset button on a Halo unit until the LED changes, then re-run setup in the app.", "source_url": "https://www.mercusys.com/en/faq-252/", "source_name": "MERCUSYS official FAQ 252 (Halo web login)", "source_archive_url": "https://web.archive.org/web/20260729071503/https://www.mercusys.com/en/faq-252/", "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/mercusys-halo-h70x" }, { "slug": "mercusys-mr70x", "brand": "Mercusys", "model": "MR70X (AX1800)", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": "mwlogin.net", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "No default password. On first access to mwlogin.net the router forces you to create an admin password - there is no admin/admin. (Some older Mercusys models accepted admin/admin, but current firmware does not.)", "reset_steps": "Reset: with the router powered on, use a pin to press and hold the RESET button on the rear panel for about 10 seconds until it reboots, then release. Browse to http://mwlogin.net (click Advanced to accept the self-signed-certificate warning) and create a new admin password.", "source_url": "https://www.mercusys.com/en/faq-127/", "source_name": "Mercusys Official - How to Log in to the Web Management Page", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/mercusys-mr70x" }, { "slug": "meshforce-m3", "brand": "Meshforce", "model": "M3", "category": "mesh", "default_gateway_ip": null, "default_login_host": null, "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "Label-based — the default network name and password used to connect during setup are printed on the bottom of the main M3 pod. Setup and management are done in the My Mesh app; you set your own network password there. There is no admin/admin default.", "reset_steps": "Meshforce M3 is set up with the My Mesh app (download it before starting). The default Wi-Fi name and password used to join the main unit during setup are printed on the bottom label of the primary pod. To factory reset, press and hold the reset button on the unit with a pin until the LED indicator blinks, then release and set the system up again in the My Mesh app.", "source_url": "https://imeshforce.com/m3/", "source_name": "Meshforce M3 Setup Guide", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/meshforce-m3" }, { "slug": "mikrotik-chateau-5g-ax", "brand": "MikroTik", "model": "Chateau 5G ax", "category": "router", "default_gateway_ip": "192.168.88.1", "default_login_host": "192.168.88.1", "default_username": "admin", "default_password": null, "default_password_blank": true, "credential_type": "static", "credential_note": "5G (SA/NSA) CPE router on RouterOS — quad-core ARM64, 4x GbE + 1x 2.5G, USB-A, micro-SIM. RouterOS default is user admin with NO password on units without a per-device label (some units instead print user/wireless passwords on the sticker). MikroTik: \"The username is 'admin,' and there is no password (or, for some models, check user and wireless passwords on the sticker).\"", "reset_steps": "Power off, hold the reset button while powering on, and keep holding until the LED starts flashing, then release to reset RouterOS configuration to defaults.", "source_url": "https://help.mikrotik.com/docs/spaces/QG/pages/111346010/Quick+Guide+-+Chateau+5G+ax", "source_name": "MikroTik Documentation — Quick Guide: Chateau 5G ax (official)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/mikrotik-chateau-5g-ax" }, { "slug": "mikrotik-chateau-lte12", "brand": "MikroTik", "model": "Chateau LTE12", "category": "gateway", "default_gateway_ip": "192.168.88.1", "default_login_host": null, "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "LTE Category 12 CPE gateway with an integrated modem (LTE bands 1/3/5/7/8/20/28/38/40) and dual-band Wi-Fi 5 (2.4GHz b/g/n + 5GHz a/n/ac), RouterOS v7. Username is admin; newer units carry a unique password on the sticker (no static default), some ship blank and prompt set-on-first-login. Access WebFig/WinBox at 192.168.88.1.", "reset_steps": "Hold the Reset button during boot until the green LED flashes, then release to reset the RouterOS configuration.", "source_url": "https://help.mikrotik.com/docs/spaces/UM/pages/18350110/Chateau+LTE12", "source_name": "MikroTik Documentation — Chateau LTE12 User Manual", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/mikrotik-chateau-lte12" }, { "slug": "mikrotik-hap-ac2", "brand": "MikroTik", "model": "hAP ac²", "category": "router", "default_gateway_ip": "192.168.88.1", "default_login_host": null, "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "The hAP ac2 is the 802.11ac generation of MikroTik's hAP line. RouterOS uses the account name admin, and on most units that account has no password at all out of the box. Some later production batches instead print a unique password on the case sticker, and RouterOS v7 refuses to continue until you pick one.", "reset_steps": "Keep RESET pressed while the unit powers up, and let go once the green LED begins flashing. RouterOS drops back to its factory configuration.", "source_url": "https://help.mikrotik.com/docs/spaces/UM/pages/16351533/hAP+ac%C2%B2", "source_name": "MikroTik official documentation — hAP ac² manual", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/mikrotik-hap-ac2" }, { "slug": "mikrotik-hap-ax2", "brand": "MikroTik", "model": "hAP ax²", "category": "router", "default_gateway_ip": "192.168.88.1", "default_login_host": null, "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "802.11ax hardware: the hAP ax2 is the WiFi 6 member of the same family, reached at 192.168.88.1. The login name stays admin. A blank password is the shipped state for most stock, but check the case sticker first, because newer batches carry a unique one printed there. RouterOS v7 will make you choose a password during that initial session.", "reset_steps": "Power on with RESET held down, releasing the moment the green LED starts to flash. That wipes the RouterOS configuration back to defaults.", "source_url": "https://help.mikrotik.com/docs/pages/viewpage.action?pageId=141197388", "source_name": "MikroTik official documentation — hAP ax² manual", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/mikrotik-hap-ax2" }, { "slug": "mikrotik-hap-ax3", "brand": "MikroTik", "model": "hAP ax3", "category": "router", "default_gateway_ip": "192.168.88.1", "default_login_host": null, "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "Dual-band Wi-Fi 6 (802.11ax) home router on RouterOS v7 with gigabit Ethernet ports. Username is admin; the unique default password is retrieved from a pull-out card holder near the product information on the housing (no static default). Some units ship blank and prompt a password on first login. Access WebFig/WinBox at 192.168.88.1.", "reset_steps": "Hold the Reset button during power-up until the LED starts flashing (~5s), then release to reset the configuration.", "source_url": "https://help.mikrotik.com/docs/spaces/UM/pages/150601820/hAP+ax%C2%B3", "source_name": "MikroTik Documentation — hAP ax3 User Manual", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/mikrotik-hap-ax3" }, { "slug": "mikrotik-hex-rb750gr3", "brand": "MikroTik", "model": "hEX (RB750Gr3)", "category": "router", "default_gateway_ip": "192.168.88.1", "default_login_host": null, "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "5-port desktop Gigabit Ethernet router with no Wi-Fi, microSD slot, USB-A, 8-30V DC/passive PoE on Ether1 — MikroTik's compact wired-only home/small-office router. Username admin with no password on most stock (check the case sticker on some production batches) per the official MikroTik documentation.", "reset_steps": "Hold the recessed RESET button while powering the unit on; release once the LED begins blinking to restore RouterOS factory defaults. If IP access is unavailable, connect via WinBox using the device's MAC address on the LAN side.", "source_url": "https://help.mikrotik.com/docs/spaces/UM/pages/8978720/hEX", "source_name": "MikroTik Documentation — hEX User Manual", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/mikrotik-hex-rb750gr3" }, { "slug": "mikrotik-l009uigs-2haxd-in", "brand": "MikroTik", "model": "L009UiGS-2HaxD-IN", "category": "router", "default_gateway_ip": "192.168.88.1", "default_login_host": null, "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "9-port cloud router: 8x Gigabit + 1x 2.5G SFP, USB 3.0, PoE-in on Ether1/PoE-out on Ether8, single-band 2.4GHz Wi-Fi 6 radio, RouterOS Level 5 — MikroTik's PoE-focused small-office router. Username admin with no password on most stock (check the case sticker on some batches) per the official MikroTik documentation.", "reset_steps": "Power on the unit with RESET held down, letting go the moment the LED begins to blink to reset RouterOS to defaults. If IP access is unavailable, connect via WinBox using the device's MAC address on the LAN side.", "source_url": "https://help.mikrotik.com/docs/spaces/UM/pages/242909340/L009UiGS-2HaxD-IN", "source_name": "MikroTik Documentation — L009UiGS-2HaxD-IN User Manual", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/mikrotik-l009uigs-2haxd-in" }, { "slug": "mikrotik-rb5009", "brand": "MikroTik", "model": "RB5009", "category": "router", "default_gateway_ip": "192.168.88.1", "default_login_host": null, "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "Wired-only RouterOS v7 desktop router: 7x 1G + 1x 2.5G Ethernet + 1x 10G SFP+, quad-core ARM 88F7040 @1.4GHz, 1GB RAM, USB 3.0, no Wi-Fi. Username is admin; current production ships a unique password printed on the packaging/label (no static default), while older stock ships blank and prompts you to set one on first login. Access WebFig/WinBox at 192.168.88.1.", "reset_steps": "Hold the Reset button during power-up until the green LED starts flashing (~5s), then release to reset the RouterOS configuration to defaults.", "source_url": "https://help.mikrotik.com/docs/pages/viewpage.action?pageId=78086262", "source_name": "MikroTik Documentation — RB5009UG+S+IN User Manual", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/mikrotik-rb5009" }, { "slug": "mikrotik-wap-ax", "brand": "MikroTik", "model": "wAP ax", "category": "ap", "default_gateway_ip": "192.168.88.1", "default_login_host": null, "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "Weatherproof outdoor Wi-Fi 6 access point, dual-chain 2.4GHz + 5GHz radios, 2x Gigabit Ethernet with PoE-in on Ether1, IP54 rated — MikroTik's outdoor AP line. Username admin with no password on most stock (check the case sticker on some batches) per the official MikroTik documentation.", "reset_steps": "Hold the RESET button on the underside while powering the unit on, releasing once the LED starts blinking to restore factory defaults. Connect via WinBox to the device's MAC address from the LAN side if IP access fails.", "source_url": "https://help.mikrotik.com/docs/spaces/UM/pages/279052378/wAP+ax", "source_name": "MikroTik Documentation — wAP ax User Manual", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/mikrotik-wap-ax" }, { "slug": "motorola-mb8611", "brand": "Motorola", "model": "MB8611", "category": "gateway", "default_gateway_ip": "192.168.100.1", "default_login_host": null, "default_username": "admin", "default_password": "motorola", "default_password_blank": false, "credential_type": "static", "credential_note": "Genuine documented factory default is admin / motorola (lowercase). The default is also printed on the bottom label. It is a modem, so this page shows connection status and settings, not Wi-Fi.", "reset_steps": "The MB8611 is a DOCSIS 3.1 cable modem (no Wi-Fi). Open a browser to http://192.168.100.1 and log in with username 'admin' and password 'motorola' (all lowercase), then change the password. If you've forgotten a changed password, factory reset by inserting a paperclip into the recessed Reset hole on the back and holding about 10 seconds until the modem reboots, which restores admin/motorola.", "source_url": "https://help.motorolanetwork.com/kb/mb8611/how-to-change-the-admin-login-for-the-mb8611", "source_name": "Motorola Home Networking Support (MB8611 admin login)", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/motorola-mb8611" }, { "slug": "motorola-mg8702", "brand": "Motorola", "model": "MG8702", "category": "gateway", "default_gateway_ip": "192.168.0.1", "default_login_host": null, "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "Username admin; the password is the UNIQUE value printed on the device's bottom label (entered lowercase) — there is no shared default password.", "reset_steps": "Hold the recessed reset button on the rear ~10+ seconds until it restarts to restore factory defaults.", "source_url": "https://en-us.support.motorola.com/ci/fattach/get/82900553/1703022460/redirect/1/filename/MG8702-UserManual.pdf", "source_name": "Motorola MG8702 official User Manual", "source_archive_url": "https://web.archive.org/web/20260729065357/https://en-us.support.motorola.com/ci/fattach/get/82900553/1703022460/redirect/1/filename/MG8702-UserManual.pdf", "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/motorola-mg8702" }, { "slug": "netgate-4100", "brand": "Netgate", "model": "Netgate 4100", "category": "gateway", "default_gateway_ip": "192.168.1.1", "default_login_host": null, "default_username": "admin", "default_password": "pfsense", "default_password_blank": false, "credential_type": "static", "credential_note": "1U desktop security gateway: dual-core Intel Atom C3338R, 2x 1GbE + 4x 2.5GbE flexible WAN/LAN ports, 4GB RAM, runs pfSense Plus, no Wi-Fi — the entry model above the SG-2100. Genuine static default admin/pfsense confirmed in the official initial-configuration docs; pfSense Plus 24.03+ forces a password change on first login.", "reset_steps": "At the console/serial menu choose option 4 'Reset to factory defaults', or use Diagnostics > Factory Defaults in the pfSense GUI; LAN reverts to 192.168.1.1. Browse there and log in with admin/pfsense.", "source_url": "https://docs.netgate.com/pfsense/en/latest/solutions/netgate-4100/initial-configuration.html", "source_name": "Netgate 4100 Security Gateway — Initial Configuration (official documentation)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/netgate-4100" }, { "slug": "netgate-6100", "brand": "Netgate", "model": "Netgate 6100", "category": "gateway", "default_gateway_ip": "192.168.1.1", "default_login_host": null, "default_username": "admin", "default_password": "pfsense", "default_password_blank": false, "credential_type": "static", "credential_note": "Mid-tier rack appliance in the 4100/6100/8200 family: a quad-core Atom CPU, two 10-Gigabit SFP+ uplinks, a pair of combo 1GbE ports and four 2.5GbE ports feed 8GB of RAM running pfSense Plus. Netgate's own initial-configuration docs confirm the shared factory login admin/pfsense; pfSense Plus 24.03 onward requires replacing that password before continuing.", "reset_steps": "Boot to the serial console and pick 'Reset to factory defaults', or from the pfSense GUI go to Diagnostics > Factory Defaults — either path drops the LAN interface back to 192.168.1.1 for the admin/pfsense login.", "source_url": "https://docs.netgate.com/pfsense/en/latest/solutions/netgate-6100/initial-configuration.html", "source_name": "Netgate 6100 Security Gateway — Initial Configuration (official documentation)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/netgate-6100" }, { "slug": "netgate-8200", "brand": "Netgate", "model": "Netgate 8200", "category": "gateway", "default_gateway_ip": "192.168.1.1", "default_login_host": null, "default_username": "admin", "default_password": "pfsense", "default_password_blank": false, "credential_type": "static", "credential_note": "Flagship of the trio: eight Atom C3758R cores, two 10-Gigabit SFP+ ports, two combo 1GbE ports and four 2.5GbE ports back a 16GB RAM budget for pfSense Plus, well ahead of the 4100/6100 in throughput. Netgate's official initial-configuration guide lists the same factory credential as the rest of the line — admin/pfsense — with pfSense Plus 24.03+ requiring an immediate change.", "reset_steps": "Restore factory settings via the console/serial boot menu (option 4) or Diagnostics > Factory Defaults inside pfSense; the LAN side comes back up at 192.168.1.1 for the admin/pfsense login.", "source_url": "https://docs.netgate.com/pfsense/en/latest/solutions/netgate-8200/initial-configuration.html", "source_name": "Netgate 8200 Security Gateway — Initial Configuration (official documentation)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/netgate-8200" }, { "slug": "netgate-sg-1100", "brand": "Netgate", "model": "SG-1100 (Netgate 1100)", "category": "gateway", "default_gateway_ip": "192.168.1.1", "default_login_host": null, "default_username": "admin", "default_password": "pfsense", "default_password_blank": false, "credential_type": "static", "credential_note": "Entry-level pfSense Plus security-gateway/firewall (Marvell ARM, 3x Gigabit Ethernet, fanless). Genuine static default admin/pfsense; a password change is forced at first login on pfSense Plus 24.03 and later.", "reset_steps": "On the SG-1100 the recessed reset button is a HARD reset (it powers the unit off immediately) and is NOT a factory-default reset — Netgate warns it can corrupt data. Restore defaults via the console menu or the GUI at Diagnostics > Factory Defaults instead. Then browse to https://192.168.1.1 and sign in.", "source_url": "https://docs.netgate.com/manuals/pfsense/en/latest/sg-1100-security-gateway-manual.pdf", "source_name": "Netgate 1100 Security Gateway Manual (official)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/netgate-sg-1100" }, { "slug": "netgate-sg-2100", "brand": "Netgate", "model": "SG-2100 (Netgate 2100)", "category": "gateway", "default_gateway_ip": "192.168.1.1", "default_login_host": null, "default_username": "admin", "default_password": "pfsense", "default_password_blank": false, "credential_type": "static", "credential_note": "pfSense Plus security-gateway/firewall appliance (Marvell ARM, multi-Gigabit, optional embedded LTE). Genuine static default admin/pfsense; on pfSense Plus 24.03 and later you must change this to a non-default password at first login.", "reset_steps": "The recessed reset button restores factory defaults but only responds during the boot sequence (not while running); alternatively use the console menu or the GUI at Diagnostics > Factory Defaults. Then browse to https://192.168.1.1 and sign in.", "source_url": "https://docs.netgate.com/manuals/pfsense/en/latest/netgate-2100-security-gateway-manual.pdf", "source_name": "Netgate 2100 Security Gateway Manual (official)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/netgate-sg-2100" }, { "slug": "netgear-cm1000", "brand": "Netgear", "model": "CM1000", "category": "gateway", "default_gateway_ip": "192.168.100.1", "default_login_host": null, "default_username": "admin", "default_password": "password", "default_password_blank": false, "credential_type": "static", "credential_note": "NETGEAR documents a static default of admin / password (case-sensitive) for its CM-series cable modems. This applies to CM400/500/600/700/1000/1100/1200 and similar — but NOT the CM2000, which ships with a unique label password instead.", "reset_steps": "The CM1000 is a cable modem only and broadcasts no Wi-Fi. Open a browser to http://192.168.100.1 and log in with username 'admin' and password 'password' (both case-sensitive). To factory reset, press and hold the Restore Factory Settings button with a paperclip for about 7 seconds until the power LED blinks, then log in again with admin/password.", "source_url": "https://kb.netgear.com/000059644/How-do-I-log-in-to-my-NETGEAR-cable-modem", "source_name": "NETGEAR Support (How do I log in to my NETGEAR cable modem)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/netgear-cm1000" }, { "slug": "netgear-cm2000", "brand": "Netgear", "model": "CM2000", "category": "gateway", "default_gateway_ip": "192.168.100.1", "default_login_host": null, "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "Unlike other NETGEAR CM-series modems, the CM2000 has NO shared default password — each unit ships with a unique password printed on its label. NETGEAR calls this out explicitly.", "reset_steps": "The CM2000 is a cable modem only. Open a browser to http://192.168.100.1 and log in with username 'admin' and the unique password printed on the product label. To factory reset, press and hold the Restore Factory Settings button with a paperclip for about 7 seconds until the power LED blinks; the login reverts to admin + the label's unique password.", "source_url": "https://kb.netgear.com/000059644/How-do-I-log-in-to-my-NETGEAR-cable-modem", "source_name": "NETGEAR Support (How do I log in to my NETGEAR cable modem)", "source_archive_url": "https://web.archive.org/web/20260729071327/https://kb.netgear.com/000059644/How-do-I-log-in-to-my-NETGEAR-cable-modem", "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/netgear-cm2000" }, { "slug": "netgear-cm3000", "brand": "Netgear", "model": "CM3000", "category": "gateway", "default_gateway_ip": "192.168.100.1", "default_login_host": null, "default_username": "admin", "default_password": "password", "default_password_blank": false, "credential_type": "static", "credential_note": "DOCSIS 3.1, up to 2.5 Gbps port speed — a newer, higher-tier modem-only SKU than the CM1000/CM2000 already covered. NETGEAR's cable-modem login KB explicitly lists CM3000 among the applicable models and states the shared static default (admin/password); the CM2000 is called out by name as the sole exception with a unique label password — CM3000 is not exempted.", "reset_steps": "The CM3000 is a DOCSIS 3.1 cable modem only (no built-in router/Wi-Fi, fixed LAN IP). Open a browser to http://192.168.100.1 and log in with username 'admin' and password 'password' (case-sensitive). To factory reset, press and hold the Restore Factory Settings button with a paperclip for about 7 seconds until the power LED blinks, then log in again with admin/password.", "source_url": "https://kb.netgear.com/000059644/How-do-I-log-in-to-my-NETGEAR-cable-modem", "source_name": "NETGEAR Support — How do I log in to my NETGEAR cable modem? (CM3000 listed under Applicable Models)", "source_archive_url": "https://web.archive.org/web/20260727184453/https://kb.netgear.com/000059644/How-do-I-log-in-to-my-NETGEAR-cable-modem", "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/netgear-cm3000" }, { "slug": "netgear-dgn2200", "brand": "Netgear", "model": "DGN2200 (N300 ADSL2+)", "category": "gateway", "default_gateway_ip": "192.168.0.1", "default_login_host": "routerlogin.net", "default_username": "admin", "default_password": "password", "default_password_blank": false, "credential_type": "static", "credential_note": "NETGEAR's own DGN2200 user manual states the modem router ships with the user name admin and password password and advises changing them. Genuine documented static default for this DSL gateway.", "reset_steps": "Open a browser to http://192.168.0.1 (or http://routerlogin.net) and log in with admin / password. To reset, hold the Restore Factory Settings button on the rear for about 7 seconds until the LEDs blink, then release; the login reverts to admin / password.", "source_url": "https://www.downloads.netgear.com/files/GDC/DGN2200/DGN2200_UM_3Feb11.pdf", "source_name": "NETGEAR DGN2200 User Manual (official PDF)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/netgear-dgn2200" }, { "slug": "netgear-cm1200", "brand": "Netgear", "model": "Nighthawk CM1200 Cable Modem", "category": "gateway", "default_gateway_ip": "192.168.100.1", "default_login_host": "192.168.100.1", "default_username": "admin", "default_password": "password", "default_password_blank": false, "credential_type": "static", "credential_note": "Multi-Gig DOCSIS 3.1 cable modem (32x8) with 2x 1G Ethernet aggregation — no Wi-Fi. Unlike NETGEAR's routers, its cable modems keep a genuine static default: admin / password (case-sensitive). NETGEAR: \"The user name is admin. The default password is password.\"", "reset_steps": "Use a paperclip to hold the rear Reset button ~7 seconds until the LEDs blink to restore factory defaults; credentials return to admin / password and the LAN IP to 192.168.100.1.", "source_url": "https://www.downloads.netgear.com/files/GDC/CM1200/CM1200_UM_EN.pdf", "source_name": "NETGEAR CM1200 User Manual — official PDF", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/netgear-cm1200" }, { "slug": "netgear-nighthawk-mk63", "brand": "Netgear", "model": "Nighthawk Mesh MK63 (AX1800)", "category": "mesh", "default_gateway_ip": "192.168.1.1", "default_login_host": "routerlogin.net", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "The Nighthawk app forces you to set your own admin password during setup — admin/password is not a working default. Web admin at routerlogin.net uses whatever password you created in the app.", "reset_steps": "This WiFi 6 mesh kit is set up through the Nighthawk app, which makes you create an admin password, so there is no default web login. To reset the router unit, power it on and hold the Reset button on the back for about 7 seconds until the LED blinks, then re-run setup via the Nighthawk app or http://routerlogin.net to create a new password.", "source_url": "https://kb.netgear.com/1148/What-are-the-default-user-interface-passwords-for-NETGEAR-devices", "source_name": "NETGEAR KB 1148 — Default user interface passwords for NETGEAR devices", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/netgear-nighthawk-mk63" }, { "slug": "netgear-nighthawk-r6700", "brand": "Netgear", "model": "Nighthawk R6700 / R6400 (AC1750)", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": "routerlogin.net", "default_username": "admin", "default_password": "password", "default_password_blank": false, "credential_type": "static", "credential_note": "Documented default is admin / password. Later revisions (e.g. R6700v3) may prompt you to set an admin password on first setup.", "reset_steps": "Go to http://www.routerlogin.net (192.168.1.1) with admin / password. To reset, hold the Restore Factory Settings button with a paperclip ~7 seconds until the Power LED blinks amber.", "source_url": "https://kb.netgear.com/1148/What-are-the-default-user-interface-passwords-for-NETGEAR-devices", "source_name": "NETGEAR official KB 1148 (Default UI passwords)", "source_archive_url": "https://web.archive.org/web/20260729064837/https://kb.netgear.com/1148/What-are-the-default-user-interface-passwords-for-NETGEAR-devices", "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/netgear-nighthawk-r6700" }, { "slug": "netgear-nighthawk-r7000", "brand": "Netgear", "model": "Nighthawk R7000 (AC1900)", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": "routerlogin.net", "default_username": "admin", "default_password": "password", "default_password_blank": false, "credential_type": "static", "credential_note": "A pre-forced-setup-era model: default login is admin / password.", "reset_steps": "Go to http://www.routerlogin.net (192.168.1.1) with admin / password. To reset, use a paperclip to hold the Restore Factory Settings button ~7 seconds until the Power LED blinks.", "source_url": "https://kb.netgear.com/24340/What-are-the-factory-default-settings-on-my-Nighthawk-R7000-router-and-how-do-I-reset-to-default", "source_name": "NETGEAR official KB 24340 (R7000 factory defaults)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/netgear-nighthawk-r7000" }, { "slug": "netgear-nighthawk-rax200", "brand": "Netgear", "model": "Nighthawk RAX200 (AX11000)", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": "routerlogin.net", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "Modern Nighthawk firmware makes you set your own admin password on first setup — there is no admin/admin or admin/password that works out of the box. Netgear's legacy default (admin / password) only applies to older models.", "reset_steps": "This tri-band Nighthawk forces you to create an admin password (and security questions) during first-time setup, so there is no working factory login to recover. To start clean, power the router on, find the recessed Reset button on the back, and press and hold it with a paperclip for about 7 seconds until the Power LED blinks. After it reboots, browse to http://routerlogin.net (or 192.168.1.1) and the setup wizard walks you through creating a new admin password.", "source_url": "https://kb.netgear.com/1148/What-are-the-default-user-interface-passwords-for-NETGEAR-devices", "source_name": "NETGEAR KB 1148 — Default user interface passwords for NETGEAR devices", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/netgear-nighthawk-rax200" }, { "slug": "netgear-nighthawk-rax30", "brand": "Netgear", "model": "Nighthawk RAX30", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": "routerlogin.net", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "Dual-band Wi-Fi 6 (AX2400), 5-stream, 2.4/5 GHz standalone router with four gigabit LAN ports — an entry AX SKU below the AX3000 RAX40 and AX4300 RAX43/RAX45. Web login at routerlogin.net (192.168.1.1); no universal default password. NETGEAR's manual: \"The password is the one that you specified the first time that you logged in.\"", "reset_steps": "Press and hold the Reset button on the rear panel for at least 7 seconds until the Power LED blinks, then release to restore factory default settings.", "source_url": "https://www.downloads.netgear.com/files/GDC/RAX30/RAX30_UM_EN.pdf", "source_name": "NETGEAR Nighthawk AX2400 WiFi 6 Router (RAX30) User Manual — official", "source_archive_url": "https://web.archive.org/web/20260731035530/https://www.downloads.netgear.com/files/GDC/RAX30/RAX30_UM_EN.pdf", "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/netgear-nighthawk-rax30" }, { "slug": "netgear-nighthawk-rax40", "brand": "Netgear", "model": "Nighthawk RAX40", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": "routerlogin.net", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "Nighthawk AX4 4-stream dual-band Wi-Fi 6 (AX3000), 2.4/5 GHz standalone router, four gigabit LAN + one gigabit WAN — sits between the AX2400 RAX30 and the AX4300 RAX43/RAX45 already covered. NETGEAR's manual: \"The password is the one that you specified the first time that you logged in.\"", "reset_steps": "Press and hold the Reset button on the rear panel until the Power LED blinks, then release to return the router to factory default settings.", "source_url": "https://www.downloads.netgear.com/files/GDC/RAX40/RAX40_UM_EN.pdf", "source_name": "NETGEAR Nighthawk AX4 AX3000 WiFi Router (RAX40) User Manual — official", "source_archive_url": "https://web.archive.org/web/20260802221524/https://www.downloads.netgear.com/files/GDC/RAX40/RAX40_UM_EN.pdf", "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/netgear-nighthawk-rax40" }, { "slug": "netgear-nighthawk-rax43", "brand": "Netgear", "model": "Nighthawk RAX43 (AX4300)", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": "routerlogin.net", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "This WiFi 6 Nighthawk forces you to choose your own admin password at setup — there is no admin/password out of the box. A factory reset is the only way back in if you forget it.", "reset_steps": "The RAX43 requires you to create an admin password during first-time setup. To regain access, power the router on, hold the recessed Reset button on the rear with a paperclip for about 7 seconds until the Power LED blinks, then after it reboots visit http://routerlogin.net (192.168.1.1) and set a new admin password.", "source_url": "https://kb.netgear.com/1148/What-are-the-default-user-interface-passwords-for-NETGEAR-devices", "source_name": "NETGEAR KB 1148 — Default user interface passwords for NETGEAR devices", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/netgear-nighthawk-rax43" }, { "slug": "netgear-nighthawk-rax45", "brand": "Netgear", "model": "Nighthawk RAX45", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": "routerlogin.net", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "Nighthawk AX6 (AX4300-class) dual-band Wi-Fi 6 router, 4 external antennas, 4x gigabit LAN + 1 gigabit WAN — distinct SKU from the RAX43/RAX50/RAX70/RAX80 already covered. NETGEAR's own login KB: username is admin, password is the one you specified during setup — no factory default password.", "reset_steps": "Use a paperclip to press and hold the recessed Reset button on the rear panel for about 7 seconds until the power LED blinks amber, then release.", "source_url": "https://kb.netgear.com/980/How-do-I-log-in-to-my-NETGEAR-router", "source_name": "NETGEAR Support — How do I log in to my NETGEAR home router? (applies to Nighthawk RAX45)", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/netgear-nighthawk-rax45" }, { "slug": "netgear-nighthawk-rax50", "brand": "Netgear", "model": "Nighthawk RAX50 (AX5400)", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": "routerlogin.net", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "Username is admin. Newer NETGEAR products require setting the admin password on first setup, so there is no usable factory-default password.", "reset_steps": "Go to http://www.routerlogin.net (192.168.1.1); newer NETGEAR products require you to set the admin password during first-time setup. To reset, hold the Reset button ~10 seconds until the Power LED blinks.", "source_url": "https://kb.netgear.com/1148/What-are-the-default-user-interface-passwords-for-NETGEAR-devices", "source_name": "NETGEAR official KB 1148 (Default UI passwords)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/netgear-nighthawk-rax50" }, { "slug": "netgear-nighthawk-rax54s", "brand": "Netgear", "model": "Nighthawk RAX54S (AX5400)", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": "routerlogin.net", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "Nighthawk AX6 6-stream AX5400 dual-band Wi-Fi 6 router. The username is fixed at admin, but there is no static default password — it is the one you create at first login. NETGEAR: \"The user name is admin. The password is the one that you specified the first time that you logged in.\"", "reset_steps": "Use a paperclip to hold the rear Reset button until the Power LED blinks, then release to restore factory defaults; you set a new admin password at the next login.", "source_url": "https://www.downloads.netgear.com/files/GDC/RAX54S/RAX54S_UM_EN.pdf", "source_name": "NETGEAR Nighthawk RAX54S User Manual — official PDF", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/netgear-nighthawk-rax54s" }, { "slug": "netgear-nighthawk-rax70", "brand": "Netgear", "model": "Nighthawk RAX70 (AX6600)", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": "routerlogin.net", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "Newer Nighthawk firmware makes you set the admin password at first setup, so admin/password is not a valid default. Reset to factory only if you've lost the password you created.", "reset_steps": "Setup on this tri-band Nighthawk forces you to pick an admin password, so there is no factory login to fall back on. To reset, power it on, press and hold the Reset button on the back for roughly 7 seconds until the Power LED flashes, wait for reboot, then open http://routerlogin.net or 192.168.1.1 and create a new admin password in the wizard.", "source_url": "https://kb.netgear.com/1148/What-are-the-default-user-interface-passwords-for-NETGEAR-devices", "source_name": "NETGEAR KB 1148 — Default user interface passwords for NETGEAR devices", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/netgear-nighthawk-rax70" }, { "slug": "netgear-nighthawk-rax80", "brand": "Netgear", "model": "Nighthawk RAX80 (AX8 / AX6000)", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": "routerlogin.net", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "This model prompts you to create an admin password during initial setup — the old admin/password default does not apply. If you never changed it, a factory reset lets you set a new one.", "reset_steps": "The Nighthawk AX8 setup wizard requires you to create your own admin password at first login, so recover access by factory resetting rather than hunting a default. Power the unit on, hold the recessed Reset button on the rear panel for about 7 seconds until the Power LED blinks, then let it reboot and go to http://routerlogin.net (192.168.1.1) to set a fresh admin password.", "source_url": "https://kb.netgear.com/1148/What-are-the-default-user-interface-passwords-for-NETGEAR-devices", "source_name": "NETGEAR KB 1148 — Default user interface passwords for NETGEAR devices", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/netgear-nighthawk-rax80" }, { "slug": "netgear-nighthawk-raxe300", "brand": "Netgear", "model": "Nighthawk RAXE300", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": "routerlogin.net", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "Tri-band Wi-Fi 6E (AXE7800) standalone desktop router, 2.4/5/6 GHz, with a 2.5G Multi-Gig Internet port, four gigabit LAN and USB-C 3.0 — a 6GHz tier above the dual-band RAX30/RAX40 in this run. The factory label prints admin/password, but NETGEAR's own manual states the live login is the one you set on first login: \"The password is the one that you specified the first time that you logged in.\"", "reset_steps": "Press and hold the recessed Reset button on the rear panel for at least 10 seconds until the Power LED blinks white, then release to restore factory settings.", "source_url": "https://www.downloads.netgear.com/files/GDC/RAXE300/RAXE300_UM_EN.pdf", "source_name": "NETGEAR Nighthawk AXE7800 RAXE300 User Manual (202-12252-01) — official", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/netgear-nighthawk-raxe300" }, { "slug": "netgear-nighthawk-raxe500", "brand": "Netgear", "model": "Nighthawk RAXE500 (AXE11000)", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": "routerlogin.net", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "Tri-band WiFi 6E flagship. The login name is admin, but there is no usable factory password — newer NETGEAR products force you to set the admin password on first setup (routerlogin.net or the Nighthawk app).", "reset_steps": "Insert a paperclip into the recessed Reset hole on the back and hold about 7 seconds until the Power LED blinks amber, then release; the AXE11000 reboots to factory defaults and prompts you to create the admin password during first-time setup.", "source_url": "https://kb.netgear.com/1148/What-are-the-default-user-interface-passwords-for-NETGEAR-devices", "source_name": "NETGEAR official KB 1148 (Default UI passwords)", "source_archive_url": "https://web.archive.org/web/20260729064837/https://kb.netgear.com/1148/What-are-the-default-user-interface-passwords-for-NETGEAR-devices", "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/netgear-nighthawk-raxe500" }, { "slug": "netgear-nighthawk-rs700", "brand": "Netgear", "model": "Nighthawk RS700 (BE19000, WiFi 7)", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": "routerlogin.net", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "BE19000 WiFi 7 tower router (sold as RS700 / RS700S). Login name admin; no default password ships — first-time setup requires you to create one. Manage at routerlogin.net or in the Nighthawk app.", "reset_steps": "Hold the recessed Reset button with a pin for roughly 7 seconds until the Power LED starts blinking, then release to restore factory defaults; you choose the admin password when the setup wizard runs.", "source_url": "https://kb.netgear.com/1148/What-are-the-default-user-interface-passwords-for-NETGEAR-devices", "source_name": "NETGEAR official KB 1148 (Default UI passwords)", "source_archive_url": "https://web.archive.org/web/20260729064837/https://kb.netgear.com/1148/What-are-the-default-user-interface-passwords-for-NETGEAR-devices", "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/netgear-nighthawk-rs700" }, { "slug": "netgear-orbi-rbk50", "brand": "Netgear", "model": "Orbi RBK50 (AC3000)", "category": "mesh", "default_gateway_ip": "192.168.1.1", "default_login_host": "orbilogin.com", "default_username": "admin", "default_password": "password", "default_password_blank": false, "credential_type": "static", "credential_note": "Netgear documents the Orbi default admin login as admin / password. If you set the system up through the Orbi app you may have been prompted to create your own password instead — in that case reset to factory to restore admin/password.", "reset_steps": "Log in to the router (RBR50) at http://orbilogin.com or 192.168.1.1 with user name admin and password password (case-sensitive). To factory reset, power the Orbi router on and hold the Reset button on the bottom for about 7-10 seconds until the ring LED blinks amber, then re-sync the satellite and log in with admin/password.", "source_url": "https://kb.netgear.com/31014/How-do-I-change-my-Orbi-WiFi-System-s-admin-login-password", "source_name": "NETGEAR KB 31014 — Change your Orbi WiFi System's admin login password", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/netgear-orbi-rbk50" }, { "slug": "netgear-orbi-rbk752", "brand": "Netgear", "model": "Orbi RBK752 (AX4200)", "category": "mesh", "default_gateway_ip": "192.168.1.1", "default_login_host": "orbilogin.com", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "Set up through the Orbi app, this system forces you to create your own admin password. Netgear's legacy Orbi default (admin / password) may still apply if configured via the web interface, but app setup overrides it.", "reset_steps": "This WiFi 6 Orbi is normally set up via the Orbi app, which makes you create an admin password, so there's no reliable default. To reset the router (RBR750), power it on and hold the Reset button on the bottom for about 7-10 seconds until the ring LED blinks amber, then re-run setup in the Orbi app or at http://orbilogin.com to set a new admin password.", "source_url": "https://kb.netgear.com/31014/How-do-I-change-my-Orbi-WiFi-System-s-admin-login-password", "source_name": "NETGEAR KB 31014 — Change your Orbi WiFi System's admin login password", "source_archive_url": "https://web.archive.org/web/20260729065908/https://kb.netgear.com/31014/How-do-I-change-my-Orbi-WiFi-System-s-admin-login-password", "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/netgear-orbi-rbk752" }, { "slug": "netgear-orbi-rbk762s", "brand": "Netgear", "model": "Orbi RBK762S (RBR760, AX5400)", "category": "mesh", "default_gateway_ip": "192.168.1.1", "default_login_host": "orbilogin.com", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "Tri-band Wi-Fi 6 Orbi mesh system (RBR760 router + RBS760 satellite), AX5400 class. Username is admin with no static default password — it is the one you set the first time you log in at orbilogin.com. NETGEAR: \"The user name is admin. The password is the one that you specified the first time that you logged in.\"", "reset_steps": "Hold the Reset button on the bottom of the RBR760 router until the LED flashes to restore factory defaults; you then set a new admin password during setup.", "source_url": "https://www.downloads.netgear.com/files/GDC/RBK762/RBR760_RBS760_UM_EN.pdf", "source_name": "NETGEAR Orbi RBR760/RBS760 User Manual — official PDF", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/netgear-orbi-rbk762s" }, { "slug": "netgear-orbi-rbk763", "brand": "Netgear", "model": "Orbi RBK763 (AX5400)", "category": "mesh", "default_gateway_ip": "192.168.1.1", "default_login_host": "orbilogin.com", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "Orbi app setup forces you to set your own admin password, so there's no admin/password out of the box. The legacy Orbi default (admin / password) only applies to web-interface configuration.", "reset_steps": "This WiFi 6 Orbi kit is configured through the Orbi app, which makes you create an admin password during setup. To reset the router (RBR760), power it on and hold the Reset button on the bottom for about 7-10 seconds until the ring LED blinks amber, then re-run setup in the Orbi app or at http://orbilogin.com to choose a new admin password.", "source_url": "https://kb.netgear.com/31014/How-do-I-change-my-Orbi-WiFi-System-s-admin-login-password", "source_name": "NETGEAR KB 31014 — Change your Orbi WiFi System's admin login password", "source_archive_url": "https://web.archive.org/web/20260729065908/https://kb.netgear.com/31014/How-do-I-change-my-Orbi-WiFi-System-s-admin-login-password", "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/netgear-orbi-rbk763" }, { "slug": "netgear-orbi-rbk852", "brand": "Netgear", "model": "Orbi RBK852 (AX6000)", "category": "mesh", "default_gateway_ip": "192.168.1.1", "default_login_host": "orbilogin.com", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "App-based setup forces you to create your own admin password on this model — admin/password is not guaranteed to work. Netgear's Orbi KB still lists admin / password as the documented default for web-interface setups.", "reset_steps": "The Orbi AX6000 is set up through the Orbi app, which requires you to create an admin password, so there is no working default login. To reset the router (RBR850), power it on and hold the Reset button on the bottom for about 7-10 seconds until the ring LED blinks amber, then re-run setup via the Orbi app or http://orbilogin.com and set a new password.", "source_url": "https://kb.netgear.com/31014/How-do-I-change-my-Orbi-WiFi-System-s-admin-login-password", "source_name": "NETGEAR KB 31014 — Change your Orbi WiFi System's admin login password", "source_archive_url": "https://web.archive.org/web/20260729065908/https://kb.netgear.com/31014/How-do-I-change-my-Orbi-WiFi-System-s-admin-login-password", "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/netgear-orbi-rbk852" }, { "slug": "netgear-orbi-rbk853", "brand": "Netgear", "model": "Orbi RBK853", "category": "mesh", "default_gateway_ip": "192.168.1.1", "default_login_host": "orbilogin.com", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "Tri-band Wi-Fi 6 (AX6000-class) mesh system — RBR850 router + 2x RBS850 satellites with a dedicated backhaul band — a 3-piece pack distinct from the 2-piece RBK852 bundle already covered. NETGEAR's Orbi setup KB: create your own administrator password; the default admin login is 'admin' with no factory password.", "reset_steps": "Press and hold the Reset button on the back of the Orbi router for about 7 seconds until the LED blinks, then re-pair satellites using the Orbi app or orbilogin.com.", "source_url": "https://kb.netgear.com/31017/How-do-I-set-up-my-Orbi-WiFi-System", "source_name": "NETGEAR Support — How do I set up my Orbi WiFi System? (applies to RBK853)", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/netgear-orbi-rbk853" }, { "slug": "netgear-r6120", "brand": "Netgear", "model": "R6120 (AC1200)", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": "routerlogin.net", "default_username": "admin", "default_password": "password", "default_password_blank": false, "credential_type": "static", "credential_note": "This older AC1200 model ships with Netgear's universal default: user name admin, password password. Change it immediately after logging in, since it is publicly documented.", "reset_steps": "Log in at http://routerlogin.net or 192.168.1.1 with user name admin and password password (both case-sensitive). If those don't work, power the router on, use a paperclip to press and hold the Restore Factory Settings button on the back for about 7 seconds until the Power LED blinks, then log in with admin/password after it reboots.", "source_url": "https://kb.netgear.com/1148/What-are-the-default-user-interface-passwords-for-NETGEAR-devices", "source_name": "NETGEAR KB 1148 — Default user interface passwords for NETGEAR devices", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/netgear-r6120" }, { "slug": "netgear-r6260", "brand": "Netgear", "model": "R6260 (AC1600)", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": "routerlogin.net", "default_username": "admin", "default_password": "password", "default_password_blank": false, "credential_type": "static", "credential_note": "The R6260 uses Netgear's documented default of admin / password. It's a universal default, not unique to your unit, so replace it right after first login.", "reset_steps": "Browse to http://routerlogin.net or 192.168.1.1 and sign in with user name admin and password password (case-sensitive). To factory reset, power the router on, hold the recessed Restore Factory Settings button on the back for about 7 seconds until the Power LED blinks, then log back in with admin/password.", "source_url": "https://kb.netgear.com/1148/What-are-the-default-user-interface-passwords-for-NETGEAR-devices", "source_name": "NETGEAR KB 1148 — Default user interface passwords for NETGEAR devices", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/netgear-r6260" }, { "slug": "netgear-r6900", "brand": "Netgear", "model": "R6900 (Nighthawk AC1900)", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": "routerlogin.net", "default_username": "admin", "default_password": "password", "default_password_blank": false, "credential_type": "static", "credential_note": "This older Nighthawk AC1900 predates forced-setup firmware, so admin / password is the real documented default. It's the same on every unit — change it immediately.", "reset_steps": "Open http://routerlogin.net or 192.168.1.1 and log in with user name admin and password password (both case-sensitive). If the password was changed and forgotten, power the router on and hold the Restore Factory Settings button on the back for about 7 seconds until the Power LED blinks, then use admin/password after it restarts.", "source_url": "https://kb.netgear.com/1148/What-are-the-default-user-interface-passwords-for-NETGEAR-devices", "source_name": "NETGEAR KB 1148 — Default user interface passwords for NETGEAR devices", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/netgear-r6900" }, { "slug": "netgear-wndr3400", "brand": "Netgear", "model": "WNDR3400 (N600)", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": "routerlogin.net", "default_username": "admin", "default_password": "password", "default_password_blank": false, "credential_type": "static", "credential_note": "A classic N600 dual-band model whose officially documented default is admin / password (case-sensitive). NETGEAR's KB notes newer models require a password to be set on first login — this older one does not.", "reset_steps": "Go to http://routerlogin.net or http://192.168.1.1 and sign in with admin / password. To factory reset, hold the Restore Factory Settings button on the underside for about 7 seconds until the power light blinks, then release and wait for reboot; login returns to admin / password.", "source_url": "https://kb.netgear.com/1148/What-are-the-default-user-interface-passwords-for-NETGEAR-devices", "source_name": "NETGEAR Support KB 1148 — Default UI passwords", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/netgear-wndr3400" }, { "slug": "netgear-wndr3700", "brand": "Netgear", "model": "WNDR3700 (N600)", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": "routerlogin.net", "default_username": "admin", "default_password": "password", "default_password_blank": false, "credential_type": "static", "credential_note": "The documented factory default for this older gigabit N600 is admin / password. NETGEAR's official KB is the source; newer NETGEAR firmware forces a password at setup, but this model shipped with the static default.", "reset_steps": "Browse to http://routerlogin.net or http://192.168.1.1 and log in with admin / password. Factory reset: press and hold the Restore Factory Settings button on the back for about 7 seconds until the power LED flashes, then release; defaults revert to admin / password.", "source_url": "https://kb.netgear.com/1148/What-are-the-default-user-interface-passwords-for-NETGEAR-devices", "source_name": "NETGEAR Support KB 1148 — Default UI passwords", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/netgear-wndr3700" }, { "slug": "netgear-wnr2000", "brand": "Netgear", "model": "WNR2000", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": "routerlogin.net", "default_username": "admin", "default_password": "password", "default_password_blank": false, "credential_type": "static", "credential_note": "This is an older NETGEAR model, so the documented factory default is admin / password (very old NETGEAR units used 1234). NETGEAR's official KB confirms these defaults; note that NETGEAR's newer routers instead force you to create a password on first setup.", "reset_steps": "Open a browser to http://routerlogin.net or http://192.168.1.1 and log in with admin / password. If that fails, factory reset: with the router powered on, press and hold the Restore Factory Settings button on the back for about 7 seconds until the power LED blinks, then release; the credentials revert to admin / password.", "source_url": "https://kb.netgear.com/1148/What-are-the-default-user-interface-passwords-for-NETGEAR-devices", "source_name": "NETGEAR Support KB 1148 — Default UI passwords", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/netgear-wnr2000" }, { "slug": "netis-wf2419", "brand": "Netis", "model": "WF2419 (N300)", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": "netis.cc", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "Netis does not publish a single universal web-login default. Official support documents the admin page at 192.168.1.1 / netis.cc and a default Wi-Fi password of 'password'; the login credentials are on the device label. Many older Netis units used guest/guest, but that is not guaranteed - check the label.", "reset_steps": "Reset: with the router powered on, press and hold the Default/RESET button for about 10 seconds until it reboots, then release. Browse to http://192.168.1.1 or http://netis.cc and sign in using the credentials printed on the device's bottom label.", "source_url": "https://www.netis-systems.com/support/faqinfo.html?id=24", "source_name": "Netis Official Support FAQ", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/netis-wf2419" }, { "slug": "nokia-wifi-beacon", "brand": "Nokia", "model": "WiFi Beacon", "category": "mesh", "default_gateway_ip": null, "default_login_host": null, "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "Per Nokia's official Help Center, the admin password is the unique value printed on the sticker of the root Beacon — there is no universal default. The username is admin; the password is per-device.", "reset_steps": "Nokia WiFi Beacons are set up through the Nokia WiFi app. You can also sign in to the app or the web GUI with the admin credentials printed on the sticker of the root (primary) Beacon — you must be connected to the Nokia WiFi network. If you forget a changed admin password, recovery is not possible: press and hold the reset button on the root Beacon to factory reset, then redo setup in the app.", "source_url": "https://wifi-helpcenter.nokia.com/hc/en-us/articles/360046847814-Sign-in-with-admin-credentials", "source_name": "Nokia WiFi Help Center — Sign in with admin credentials", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/nokia-wifi-beacon" }, { "slug": "now-broadband-hub", "brand": "NOW Broadband", "model": "NOW Broadband Hub", "category": "gateway", "default_gateway_ip": "192.168.0.1", "default_login_host": null, "default_username": "admin", "default_password": "nowtv", "default_password_blank": false, "credential_type": "static", "credential_note": "VDSL/FTTC broadband hub issued by NOW (Sky's value brand, a Sky SR-series hub). Rare among ISP gear in having a genuinely STATIC published default — NOW's own help page states the login is admin / nowtv (lower case) at 192.168.0.1, not a per-unit label password. Users are told to change it immediately.", "reset_steps": "Browse to http://192.168.0.1 and sign in with admin / nowtv (lower case), then open the Maintenance tab and choose Set Password. To factory reset, hold the recessed reset pinhole on the rear for about 10 seconds until the hub reboots.", "source_url": "https://www.nowtv.com/gb/help/article/change-admin-password", "source_name": "NOW Broadband Help — Change Admin Password For Your NOW Broadband Hub (official)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/now-broadband-hub" }, { "slug": "o2-homebox", "brand": "o2", "model": "HomeBox", "category": "gateway", "default_gateway_ip": "192.168.1.1", "default_login_host": "o2.box", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "DSL/fibre gateway issued by o2 (Telefónica) Germany across the HomeBox line. The admin UI at o2.box (192.168.1.1) ships completely open from the factory — you create your own device password on first login, a genuine set-on-setup credential per o2's own router help page.", "reset_steps": "Use a pen or similar object to press the recessed Reset opening on the back of the HomeBox and hold for about 10-15 seconds until the Power LED lights up red, then release and wait for the Power LED to return to solid green.", "source_url": "https://www.o2online.de/service/router/", "source_name": "o2 (Telefónica Deutschland) — Router-Hilfe (official)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/o2-homebox" }, { "slug": "optimum-altice-one-gateway", "brand": "Optimum (Altice)", "model": "Altice One / Gateway", "category": "gateway", "default_gateway_ip": null, "default_login_host": null, "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "app-only", "credential_note": "There is no standalone web-admin login or default admin/password. Altice One gateways are cloud/account-managed — all settings live behind your Optimum ID at optimum.net/router or in the Optimum app.", "reset_steps": "The Altice One / Optimum gateway is managed through your Optimum account, not a local admin password. Go to optimum.net/router (or the Optimum Support & WiFi app) and sign in with your Optimum ID and password to view devices and change the WiFi name/password and guest network. To factory reset the hardware, press and hold the recessed Reset button on the unit ~10 seconds until it reboots, then reconfigure through your Optimum account.", "source_url": "https://www.optimum.net/pages/altice-one/settings.html", "source_name": "Optimum — Altice One Settings", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/optimum-altice-one-gateway" }, { "slug": "optus-ultra-wifi-modem", "brand": "Optus", "model": "Optus Ultra WiFi Modem (Gen 2)", "category": "gateway", "default_gateway_ip": "192.168.0.1", "default_login_host": null, "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "Australian Optus-supplied home internet gateway (Ultra WiFi Gen 2 on cable/NBN; the Nokia FastMile 5G Gateway variant on 5G FWA). Admin is reached at 192.168.0.1. Optus uses no universal default — enter the password printed on the sticker on the base of the modem into the password field (the Ultra WiFi has no separate username).", "reset_steps": "Hold the recessed reset button on the rear/underside for a few seconds until the modem restarts; login reverts to the password printed on the base label. Note your OptusNet username/password first, as a reset wipes custom settings.", "source_url": "https://www.optus.com.au/for-you/support/answer?id=1752", "source_name": "Optus Official Support — Home Internet WiFi username & password help", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/optus-ultra-wifi-modem" }, { "slug": "orange-livebox-6", "brand": "Orange", "model": "Livebox 6", "category": "gateway", "default_gateway_ip": "192.168.1.1", "default_login_host": "livebox", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "Next-generation Livebox (post Livebox 4/5, already covered generically as 'orange-livebox') with an on-device touchscreen and app/QR login path. Username is admin; per Orange's official support, the default password is the first 8 characters of the Wi-Fi security key printed on the device label — not a shared static default.", "reset_steps": "Touchscreen-equipped fibre gateway; alternative login via the 'Orange et moi' app or the QR code shown on the device's touchscreen (no password entry needed that way). Reset via the recessed button restores the label-derived default.", "source_url": "https://assistancepro.orange.fr/internet_livebox/utiliser/interface_de_configuration/livebox_5_6_pro/livebox__et___acceder_a_linterface_de_configuration-433412", "source_name": "Assistance Orange Pro — Livebox 6 et 7 : accéder à l'interface de configuration (official)", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/orange-livebox-6" }, { "slug": "orange-livebox", "brand": "Orange", "model": "Livebox 6 / 7", "category": "gateway", "default_gateway_ip": "192.168.1.1", "default_login_host": "livebox", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "Username is 'admin'; the admin password is not a fixed default but the first 8 uppercase characters of the WiFi security key printed on the Livebox label. Orange recommends changing it after first login.", "reset_steps": "To log in: connect to the Livebox, browse to 192.168.1.1 (or http://livebox), use username 'admin' and the admin password, which is the first 8 characters (uppercase, no spaces) of the WiFi security key printed on the Livebox label. To factory reset: with the Livebox on, press and hold the recessed Reset button on the back for about 10 seconds until it restarts, or use 'Mot de passe oublié' on the login page to reset the interface password.", "source_url": "https://assistance.orange.fr/livebox-modem/toutes-les-livebox-et-modems/depanner/un-probleme-d-identifiant-et-de-mot-de-passe-de-connexion/livebox-6-et-7-reinitialiser-le-mot-de-passe-d-acces-a-l-interface-de-configuration_371849-905287", "source_name": "Assistance Orange — Livebox 6 et 7 : réinitialiser le mot de passe d'accès à l'interface", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/orange-livebox" }, { "slug": "peplink-balance-20x", "brand": "Peplink", "model": "Balance 20X", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": null, "default_username": "admin", "default_password": "admin", "default_password_blank": false, "credential_type": "static", "credential_note": "Dual-WAN business SD-WAN router: one Gigabit Ethernet WAN plus an embedded Cat-4/Cat-7 LTE modem and a FlexModule slot; the Wi-Fi variant adds 802.11ac. Genuine static admin/admin default, and Peplink forces a password change on the first successful login. Confirm the LAN IP against the device label — the manual is Balance-line-generic.", "reset_steps": "With a paperclip, press and hold the recessed reset button — ~5-10 seconds for an admin-password reset (status LED blinks red twice) or ~20 seconds for a full factory reset (blinks red three times) — then release. After reboot, browse to https://192.168.1.1 and log in.", "source_url": "https://download.peplink.com/manual/peplink-balance-and-mediafast-firmware-manual-8.1.1.pdf", "source_name": "Peplink Balance User Manual, firmware 8.1.1 (official)", "source_archive_url": "https://web.archive.org/web/20260729072300/https://download.peplink.com/manual/peplink-balance-and-mediafast-firmware-manual-8.1.1.pdf", "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/peplink-balance-20x" }, { "slug": "peplink-balance-310x", "brand": "Peplink", "model": "Balance 310X", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": null, "default_username": "admin", "default_password": "admin", "default_password_blank": false, "credential_type": "static", "credential_note": "Enterprise/branch SD-WAN multi-WAN router (all-gigabit ports, 2.5 Gbps routing throughput, patented SpeedFusion bonding), managed via the on-box Web Admin Interface or InControl2 cloud. Genuine documented static default admin/admin; the manual recommends but does not force a change. Read-only account is user/user.", "reset_steps": "Hold the recessed reset button on the unit to restore factory defaults, which returns the Web Admin login to admin/admin at http://192.168.1.1. Change the Admin/Read-only passwords under System > Admin Security.", "source_url": "https://download.peplink.com/manual/Peplink_Balance_v6.1_user_manual.pdf", "source_name": "Peplink Balance User Manual (Firmware 6.1) — download.peplink.com (official)", "source_archive_url": "https://web.archive.org/web/20260727184738/https://download.peplink.com/manual/Peplink_Balance_v6.1_user_manual.pdf", "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/peplink-balance-310x" }, { "slug": "peplink-balance-380", "brand": "Peplink", "model": "Balance 380", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": null, "default_username": "admin", "default_password": "admin", "default_password_blank": false, "credential_type": "static", "credential_note": "Mid-tier multi-WAN SD-WAN router/firewall (configurable gigabit WAN/LAN ports, SpeedFusion bonding) positioned above the Balance 310X already covered, for medium-business deployments. Genuine documented static default admin/admin; read-only account is user/user.", "reset_steps": "With a paperclip, press and hold the recessed reset button on the back panel for about 10-20 seconds until all LEDs flash, then release to restore factory defaults; from firmware 5.4+ the admin password alone can also be reset via Maintenance > Reset Admin Password on the front LCD panel. Browse to http://192.168.1.1 and log in with admin/admin.", "source_url": "https://download.peplink.com/manual/Peplink_Balance_v6.1_user_manual.pdf", "source_name": "Peplink Balance User Manual v6.1 — download.peplink.com (official)", "source_archive_url": "https://web.archive.org/web/20260727184738/https://download.peplink.com/manual/Peplink_Balance_v6.1_user_manual.pdf", "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/peplink-balance-380" }, { "slug": "peplink-balance-one", "brand": "Peplink", "model": "Balance One", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": null, "default_username": "admin", "default_password": "admin", "default_password_blank": false, "credential_type": "static", "credential_note": "Dual-WAN SD-WAN router (Ethernet + optional embedded cellular) for SMB/branch use, desktop form factor with no built-in Wi-Fi radio — Peplink's entry point above the Balance 20X. Genuine static default admin/admin confirmed in the official Balance series manual.", "reset_steps": "With a paperclip, press and hold the recessed reset button on the back panel for about 10-20 seconds until all LEDs flash, then release to restore factory defaults. Browse to https://192.168.1.1 and log in with admin/admin.", "source_url": "https://download.peplink.com/manual/Peplink_Balance_v6.1_user_manual.pdf", "source_name": "Peplink Balance Multi-WAN Bonding Routers User Manual v6.1 (official)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/peplink-balance-one" }, { "slug": "peplink-max-br1", "brand": "Peplink", "model": "MAX BR1", "category": "gateway", "default_gateway_ip": "192.168.50.1", "default_login_host": null, "default_username": "admin", "default_password": "admin", "default_password_blank": false, "credential_type": "static", "credential_note": "Compact mobile 4G/LTE cellular router/gateway with a single embedded modem, DIN-rail or wall mountable for vehicle/IoT deployments. Genuine static default admin/admin confirmed in the official Pepwave MAX firmware manual, on a distinct default LAN IP (192.168.50.1) from the Balance line.", "reset_steps": "With a paperclip, press and hold the recessed reset button for about 10-20 seconds until all LEDs flash, then release to restore factory defaults. Browse to https://192.168.50.1 and log in with admin/admin.", "source_url": "https://download.peplink.com/manual/pepwave_max_firmware_manual-fw7.pdf", "source_name": "Pepwave MAX Series Firmware Manual fw7 (official)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/peplink-max-br1" }, { "slug": "peplink-max-br2", "brand": "Peplink", "model": "MAX BR2", "category": "router", "default_gateway_ip": "192.168.50.1", "default_login_host": null, "default_username": "admin", "default_password": "admin", "default_password_blank": false, "credential_type": "static", "credential_note": "Rugged dual-SIM/dual-cellular Pepwave MAX router for M2M and fixed-site failover (on-board Wi-Fi AP, gigabit Ethernet WAN/LAN), documented in the MAX Series User Manual 8.4.0 section 2.44. Managed via the on-box Web Admin or InControl2 cloud. The static admin/admin default is transient — first logon mandates a password change.", "reset_steps": "Rugged dual-cellular M2M/fleet LTE router. Press and hold the reset button to restore factory defaults; the Web Admin returns to admin/admin at http://192.168.50.1, after which the firmware forces a new 10-character password (mixed case plus a digit) on first logon.", "source_url": "https://download.peplink.com/manual/pepwave-max-user-manual-8.4.0.pdf", "source_name": "Pepwave MAX Series User Manual 8.4.0 — download.peplink.com (official)", "source_archive_url": "https://web.archive.org/web/20260729073635/https://download.peplink.com/manual/pepwave-max-user-manual-8.4.0.pdf", "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/peplink-max-br2" }, { "slug": "peplink-max-br2-pro", "brand": "Peplink", "model": "MAX BR2 Pro", "category": "router", "default_gateway_ip": "192.168.50.1", "default_login_host": null, "default_username": "admin", "default_password": "admin", "default_password_blank": false, "credential_type": "static", "credential_note": "Ruggedized dual-embedded-cellular-modem router for vehicle/vessel mounting — the higher-throughput 'Pro' tier of the MAX BR2 line already covered. Genuine documented static default admin/admin in the Pepwave MAX manual, same forced-change behavior as the base BR2.", "reset_steps": "With a paperclip, press and hold the recessed reset button for about 10-20 seconds until all LEDs flash, then release to restore factory defaults. Browse to http://192.168.50.1 and log in with admin/admin, after which the firmware forces a new password.", "source_url": "https://download.peplink.com/manual/Pepwave_MAX_user_manual_v6.1.pdf", "source_name": "Pepwave MAX User Manual v6.1 — download.peplink.com (official)", "source_archive_url": "https://web.archive.org/web/20260727184706/https://download.peplink.com/manual/Pepwave_MAX_user_manual_v6.1.pdf", "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/peplink-max-br2-pro" }, { "slug": "peplink-max-transit", "brand": "Peplink", "model": "MAX Transit", "category": "router", "default_gateway_ip": "192.168.50.1", "default_login_host": null, "default_username": "admin", "default_password": "admin", "default_password_blank": false, "credential_type": "static", "credential_note": "Pepwave MAX Transit cellular router built for vehicles and public transit (integrated GPS, Wi-Fi AP, gigabit Ethernet), covered by the MAX Series User Manual 8.4.0 Transit variant sections. Runs from the local Web Admin or InControl2. Ships with the documented admin/admin default but compels an immediate password change at first successful login.", "reset_steps": "In-vehicle transit cellular router with GPS. Hold the recessed reset button until the unit reboots to factory settings; login reverts to admin/admin at http://192.168.50.1 and you must define a fresh password (minimum ten characters, upper and lower case, including a number) before the dashboard loads.", "source_url": "https://download.peplink.com/manual/pepwave-max-user-manual-8.4.0.pdf", "source_name": "Pepwave MAX Series User Manual 8.4.0 — download.peplink.com (official)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/peplink-max-transit" }, { "slug": "peplink-surf-soho-mk3", "brand": "Peplink", "model": "Surf SOHO MK3", "category": "router", "default_gateway_ip": "192.168.50.1", "default_login_host": null, "default_username": "admin", "default_password": "admin", "default_password_blank": false, "credential_type": "static", "credential_note": "SOHO router with a simultaneous dual-band 802.11ac access point, 4x Gigabit Ethernet, USB LTE/3G failover WAN and three dual-band SMA antennas. Genuine static admin/admin default; Peplink forces a password change on the first successful login. Default LAN IP is 192.168.50.1.", "reset_steps": "Locate the reset button on the back panel; with a paperclip press and hold it ~10 seconds for a factory reset (status LED turns red), then release. After reboot, browse to https://192.168.50.1 and log in.", "source_url": "https://download.peplink.com/manual/pepwave_surf_soho_user_manual_fw8.3.0.pdf", "source_name": "Pepwave Surf SOHO User Manual, firmware 8.3.0 (official)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/peplink-surf-soho-mk3" }, { "slug": "plusnet-hub-one", "brand": "Plusnet", "model": "Hub One", "category": "gateway", "default_gateway_ip": "192.168.1.254", "default_login_host": null, "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "No universal default. The Plusnet Hub One uses username 'admin' plus a unique admin password printed on the back-of-hub card/sticker.", "reset_steps": "To log in: connect to the hub, browse to 192.168.1.254, enter username 'admin' and the Hub admin password from the card/sticker on the back of the hub. To factory reset: with the hub powered on, press and hold the recessed Reset button on the back for about 20 seconds until the lights flash; the admin password returns to the value printed on the back.", "source_url": "https://www.plus.net/help/broadband/router-user-guides/hub-one/", "source_name": "Plusnet Help — How to use your Plusnet router (Hub One)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/plusnet-hub-one" }, { "slug": "plusnet-hub-two", "brand": "Plusnet", "model": "Hub Two", "category": "gateway", "default_gateway_ip": "192.168.1.254", "default_login_host": null, "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "No universal default password. Each Hub Two ships with a unique admin password printed on a card/sticker on the back of the hub; the username is 'admin'.", "reset_steps": "To log in: connect to the hub, browse to 192.168.1.254, enter username 'admin' and the Hub admin password printed on the card/sticker on the back of the hub. To factory reset: with the hub on, press and hold the recessed Reset button on the back for about 20 seconds until the lights flash and it reboots; the admin password reverts to the one printed on the back.", "source_url": "https://www.plus.net/help/broadband/router-user-guides/hub-two/", "source_name": "Plusnet Help — How to use your Plusnet router (Hub Two)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/plusnet-hub-two" }, { "slug": "reyee-rg-ew1200g", "brand": "Reyee (Ruijie)", "model": "RG-EW1200G PRO", "category": "router", "default_gateway_ip": "192.168.110.1", "default_login_host": "ruiyi.cn", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "No admin/admin. The Reyee EW series ships with no preset admin password - on first login at 192.168.110.1 / ruiyi.cn you configure directly and set your own management password.", "reset_steps": "Reset: with the router powered on, press and hold the RESET button for about 10 seconds until the system LED blinks, then release and wait for reboot. Browse to http://192.168.110.1 or ruiyi.cn and set a new management password during the wizard.", "source_url": "https://reyee.ruijie.com/en-global/support/documents/slide_77342/", "source_name": "Ruijie Networks Official - Reyee RG-EW Series Home Wi-Fi Routers FAQs", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/reyee-rg-ew1200g" }, { "slug": "rogers-ignite-hitron-coda", "brand": "Rogers", "model": "Rogers Ignite — Hitron CODA modem (CODA-4582/4680)", "category": "gateway", "default_gateway_ip": "192.168.0.1", "default_login_host": null, "default_username": "Cusadmin", "default_password": "password", "default_password_blank": false, "credential_type": "static", "credential_note": "Canadian cable (DOCSIS 3.1) gateway used on Rogers Ignite Internet. Unlike most ISP gateways this one ships with a documented static admin login — username Cusadmin, password password (or your Easy Connect Wi-Fi password) — reached at 192.168.0.1. The newer Xfinity-platform Ignite WiFi Gateway (XB6/7/8) is instead app-managed and has no equivalent published web-admin default.", "reset_steps": "Hold the recessed reset button on the back of the Hitron CODA modem ~10-15 seconds until it restarts; login returns to Cusadmin / password.", "source_url": "https://www.rogers.com/support/internet/how-to-sign-into-and-change-the-password-of-your-hitron-coda-modem", "source_name": "Rogers Official Support — Sign into and change the password of your Hitron CODA modem", "source_archive_url": "https://web.archive.org/web/20260729072430/https://www.rogers.com/support/internet/how-to-sign-into-and-change-the-password-of-your-hitron-coda-modem", "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/rogers-ignite-hitron-coda" }, { "slug": "ruckus-r350", "brand": "Ruckus", "model": "R350", "category": "ap", "default_gateway_ip": null, "default_login_host": null, "default_username": "super", "default_password": "sp-admin", "default_password_blank": false, "credential_type": "static", "credential_note": "Wi-Fi 6 (802.11ax) 2x2:2 indoor access point that can also run in RUCKUS Unleashed controller-less mesh mode. A standalone, never-configured AP falls back to the documented static factory login super/sp-admin; once joined to an Unleashed network, admin credentials instead come from the network-wide account chosen during the Unleashed setup wizard.", "reset_steps": "Press and hold the recessed Reset button (use a paperclip) for 8-10 seconds until the AP reboots, or over SSH run 'set factory' followed by 'reboot'.", "source_url": "https://support.ruckuswireless.com/articles/000012418", "source_name": "Ruckus/CommScope Support KB 000012418 — How to factory reset or factory default different types of Ruckus Access Points (official)", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/ruckus-r350" }, { "slug": "ruckus-r550-unleashed", "brand": "Ruckus", "model": "R550 (Unleashed mode)", "category": "ap", "default_gateway_ip": "192.168.0.1", "default_login_host": "unleashed.ruckuswireless.com", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "Wi-Fi 6 (802.11ax) indoor access point run in Ruckus's controller-less 'Unleashed' mode — distinct from the standalone-mode static super/sp-admin default already covered for the R350. Ruckus's own knowledge base: the AP boots broadcasting an unencrypted 'Configure.Me-[xxxxxx]' SSID and setup completes at unleashed.ruckuswireless.com; admin credentials are created during that first-run wizard, not a static factory default.", "reset_steps": "Hold the reset pinhole for about 20 seconds until the LEDs cycle to restore factory defaults; the AP re-broadcasts the temporary 'Configure.Me-[xxxxxx]' SSID for a fresh setup.", "source_url": "https://support.ruckuswireless.com/articles/000006019", "source_name": "Ruckus Knowledge Base 000006019 — Default IP address for Ruckus devices (official)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/ruckus-r550-unleashed" }, { "slug": "reyee-rg-ew3200gx-pro", "brand": "Ruijie Reyee", "model": "RG-EW3200GX PRO", "category": "router", "default_gateway_ip": "192.168.110.1", "default_login_host": null, "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "Wi-Fi 6 (802.11ax) 3200M dual-band gigabit mesh router (2402 Mbps 5GHz + 800 Mbps 2.4GHz), 5 gigabit Ethernet ports, 8 external antennas; managed via ReyeeOS eWeb or the Reyee Router app. No universal default — the per-device password is on the bottom nameplate (if none is shown, admin is used), and the setup wizard mandates a reset on first login. Corrects the common aggregator claim of admin/admin.", "reset_steps": "Hold the Reset button for more than 10 seconds to restore factory settings; then log in at http://192.168.110.1 with the per-unit default password printed on the bottom nameplate (format Rexxxxxx). The wizard forces a new eWeb password on first login.", "source_url": "https://reyee.ruijie.com/en-global/support/documents/slide_ruijie-reyee-rg-ew3200gx-pro-wi-fi-router-reyeeos-1-380-configuration-guide/", "source_name": "Ruijie Reyee RG-EW3200GX PRO ReyeeOS 1.380 Configuration Guide (V1.0) — reyee.ruijie.com (official)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/reyee-rg-ew3200gx-pro" }, { "slug": "reyee-rg-m32", "brand": "Ruijie Reyee", "model": "RG-M32", "category": "mesh", "default_gateway_ip": "192.168.110.1", "default_login_host": null, "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "Reyee mesh Wi-Fi router — distinct mesh-category hardware from the already-covered RG-EW1200G/RG-EW3200GX PRO single routers. No preset admin/password pair: first connection to 192.168.110.1 auto-loads the configuration wizard where the owner creates the management password.", "reset_steps": "Wi-Fi 6 mesh router (ReyeeOS). Hold the Reset pinhole for about 10 seconds until all LEDs flash, then reconnect to the default @Ruijie-sXXXX SSID and run the setup wizard again to create a new management password.", "source_url": "https://reyee.ruijie.com/en-global/support/documents/slide_reyee-rg-m32-mesh-router-reyeeos-1-317-313-308-configuration-guide/", "source_name": "Ruijie Reyee RG-M32 Mesh Router ReyeeOS 1.317/1.313/1.308 Configuration Guide — reyee.ruijie.com (official)", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/reyee-rg-m32" }, { "slug": "sasktel-arris-nvg448", "brand": "SaskTel", "model": "ARRIS NVG448", "category": "gateway", "default_gateway_ip": "172.16.1.254", "default_login_host": null, "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "SaskTel-issued ARRIS gateway, distinct from Ziply Fiber's NVG448BQ already covered (different ISP, different SKU suffix). Username defaults to admin; password is unique per unit from the bottom label.", "reset_steps": "SaskTel infiNET fibre gateway (ARRIS NVG448, not the -BQ variant). A factory reset restores the same Device Access Code printed on a label on the bottom of the unit.", "source_url": "https://support.sasktel.com/app/answers/detail/a_id/25292/~/logging-in-to-your-arris-nvg448-gateway", "source_name": "SaskTel Support — Logging in to your ARRIS NVG448 gateway (official)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/sasktel-arris-nvg448" }, { "slug": "sasktel-green-packet-gateway", "brand": "SaskTel", "model": "Green Packet Gateway (fusion Internet)", "category": "gateway", "default_gateway_ip": "192.168.0.1", "default_login_host": null, "default_username": "admin", "default_password": "admin", "default_password_blank": false, "credential_type": "static", "credential_note": "SaskTel fusion Internet gateway — genuine shared static default admin/admin explicitly documented by SaskTel support, unlike the label-unique fibre gateways above.", "reset_steps": "SaskTel fusion Internet fixed-wireless gateway (Green Packet). A reset via the recessed button restores the documented static admin/admin pair; change it under Settings > Management > Password Setting.", "source_url": "https://support.sasktel.com/app/answers/detail/a_id/25843/~/logging-in-to-your-green-packet-gateway-(fusion-internet-service)", "source_name": "SaskTel Support — Logging in to your Green Packet gateway (fusion Internet service) (official)", "source_archive_url": "https://web.archive.org/web/20260729074303/https://support.sasktel.com/app/answers/detail/a_id/25843/~/logging-in-to-your-green-packet-gateway-(fusion-internet-service)", "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/sasktel-green-packet-gateway" }, { "slug": "sasktel-huawei-b2268h", "brand": "SaskTel", "model": "Huawei B2268H", "category": "gateway", "default_gateway_ip": "192.168.1.1", "default_login_host": null, "default_username": "admin", "default_password": "LTEcpe", "default_password_blank": false, "credential_type": "static", "credential_note": "SaskTel Huawei fusion Internet gateway with its own vendor-specific static default (LTEcpe), distinct from the Green Packet gateway's admin/admin above.", "reset_steps": "SaskTel fusion Internet fixed-wireless gateway (Huawei B2268H, also reachable at 172.16.1.254). The reset button restores the documented static admin/LTEcpe pair; you're prompted to set a new password on first login.", "source_url": "https://support.sasktel.com/app/answers/detail/a_id/17308/~/logging-in-to-your-huawei-b2268h-gateway-(fusion-internet-service)", "source_name": "SaskTel Support — Logging in to your Huawei B2268H gateway (fusion Internet service) (official)", "source_archive_url": "https://web.archive.org/web/20260729074324/https://support.sasktel.com/app/answers/detail/a_id/17308/~/logging-in-to-your-huawei-b2268h-gateway-(fusion-internet-service)", "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/sasktel-huawei-b2268h" }, { "slug": "sasktel-vantiva-ega228b", "brand": "SaskTel", "model": "Vantiva EGA228B", "category": "gateway", "default_gateway_ip": "172.16.1.254", "default_login_host": null, "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "SaskTel-issued fibre gateway. Username auto-fills as admin; password is device-unique, taken from the serial-number label, distinct from SaskTel's other fusion Internet fixed-wireless gateways below.", "reset_steps": "SaskTel infiNET fibre gateway (Vantiva/Technicolor EGA228B). A factory reset restores the same unique Web UI Password / 20-character Device Access Code printed on the gateway's serial-number label — it does not reveal a shared admin/admin.", "source_url": "https://support.sasktel.com/app/answers/detail/a_id/27611/~/logging-in-to-your-vantiva-ega228b-gateway", "source_name": "SaskTel Support — Logging in to your Vantiva EGA228B gateway (official)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/sasktel-vantiva-ega228b" }, { "slug": "sky-broadband-hub", "brand": "Sky", "model": "Sky Broadband Hub", "category": "gateway", "default_gateway_ip": "192.168.0.1", "default_login_host": null, "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "Username is 'admin', but the password is the unique WiFi password printed on the base of the hub — not a fixed default. Older Sky Hub / Sky Q Hub models historically used admin/sky; the current Sky Broadband Hub uses the label WiFi password instead.", "reset_steps": "To log in: connect to your Sky network, browse to 192.168.0.1, use username 'admin' and enter your WiFi password (the one printed on the base of the hub) when prompted. To factory reset: press and hold the recessed Reset/WPS pinhole on the back for around 30 seconds until the hub restarts; network name and password revert to the values on the base sticker.", "source_url": "https://www.sky.com/help/articles/access-your-sky-broadband-hub-settings", "source_name": "Sky Help — Access your Sky Broadband Hub settings", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/sky-broadband-hub" }, { "slug": "spectrum-sagemcom-rac2v1k", "brand": "Spectrum (Charter)", "model": "Sagemcom RAC2V1K / Askey Router", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": "192.168.1.1", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "Spectrum's own Sagemcom/Askey units print the default sign-in on the rear label; older models used admin/admin but current RAC2V1K/RAC2V1S routers are largely locked to the My Spectrum app, so the web tool is view-only for many settings.", "reset_steps": "Connect to the router and browse to http://192.168.1.1. Sign in with username 'admin'; the password is printed on the label on the back of the router. Newer Spectrum routers restrict most settings — use the My Spectrum app or spectrum.net to change the WiFi name/password. To factory reset, press and hold the recessed Reset button on the back ~10 seconds until the lights cycle, then sign in with the label credentials.", "source_url": "https://www.spectrum.net/support/internet/configuring-wireless-security-twc", "source_name": "Spectrum Support — Managing WiFi Router Settings", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/spectrum-sagemcom-rac2v1k" }, { "slug": "starlink-router", "brand": "Starlink", "model": "Starlink Router (Gen 2 / Gen 3)", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": null, "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "app-only", "credential_note": "Starlink's LEO-satellite Wi-Fi router (Gen 2 tri-band router / Gen 3 Wi-Fi 6 mesh, ships with the dish kit). It has no administrator web portal — there is no admin username or password to set; SSID, password and bypass mode are configured exclusively in the Starlink mobile app. MAC filtering and port forwarding are not offered.", "reset_steps": "There is no web admin login. Change all settings in the Starlink app (Settings). To factory reset, use the app's reset option or perform the physical reset for your router generation, then re-run setup in the app.", "source_url": "https://www.starlink.com/support/article/f9a1d602-9204-e70c-a780-f2619d99f9c7", "source_name": "Starlink Help Center — Does Starlink have a WiFi router administrator portal? (official)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/starlink-router" }, { "slug": "synology-mr2200ac", "brand": "Synology", "model": "MR2200ac (Mesh Router)", "category": "mesh", "default_gateway_ip": "192.168.1.1", "default_login_host": "router.synology.com", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "No factory default login — SRM makes you create the admin account on first setup, so there is nothing like admin/admin. The MR2200ac can also be configured through the Synology DS router app.", "reset_steps": "Connect by Ethernet, or join WiFi SSID Synology_(Serial) with password 'synology' (or set it up in the DS router mobile app). Browse to http://router.synology.com (or http://192.168.1.1:8000); the SRM wizard prompts you to create your own administrator account. To reset, hold RESET ~4 seconds (soft) or ~10 seconds (full factory reset) until it reboots.", "source_url": "https://global.download.synology.com/download/Document/Hardware/HIG/Router/19-year/MR2200ac/enu/Syno_HIG_MR2200ac_enu.pdf", "source_name": "Synology — MR2200ac Hardware Installation Guide (PDF)", "source_archive_url": "https://web.archive.org/web/20260729071038/https://global.download.synology.com/download/Document/Hardware/HIG/Router/19-year/MR2200ac/enu/Syno_HIG_MR2200ac_enu.pdf", "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/synology-mr2200ac" }, { "slug": "synology-rt2600ac", "brand": "Synology", "model": "RT2600ac", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": "router.synology.com", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "There is no factory admin password. Synology Router Manager (SRM) makes you create the administrator account during first-time setup, so the login is whatever you chose. Synology also recommends deactivating the default 'admin' username and using a custom one.", "reset_steps": "Connect a computer by Ethernet, or join WiFi SSID Synology_(Serial) with password 'synology'. Open a browser and go to http://router.synology.com (or http://192.168.1.1:8000). The SRM setup wizard prompts you to create your own administrator account (username + password) on first run. To factory reset, press and hold the RESET button ~4 seconds for a soft reset (network/password) or ~10 seconds for a full factory reset until the router beeps/reboots.", "source_url": "https://global.download.synology.com/download/Document/Hardware/HIG/Router/17-year/RT2600ac/enu/Syno_HIG_RouterRT2600ac_enu.pdf", "source_name": "Synology — RT2600ac Hardware Installation Guide (PDF)", "source_archive_url": "https://web.archive.org/web/20260729071022/https://global.download.synology.com/download/Document/Hardware/HIG/Router/17-year/RT2600ac/enu/Syno_HIG_RouterRT2600ac_enu.pdf", "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/synology-rt2600ac" }, { "slug": "synology-rt6600ax", "brand": "Synology", "model": "RT6600ax", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": "router.synology.com", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "No default password ships on the RT6600ax. SRM forces you to set the administrator account during setup, so credentials are user-created. Avoid reusing 'admin'/'root' as the username per Synology's own guidance.", "reset_steps": "Connect by Ethernet, or join WiFi SSID Synology_(Serial) with password 'synology'. Browse to http://router.synology.com (or http://192.168.1.1:8000) and complete the SRM wizard, which prompts you to create your own administrator account. To reset, hold the RESET button ~4 seconds (soft: network/password) or ~10 seconds (full factory reset) until it reboots.", "source_url": "https://global.download.synology.com/download/Document/Hardware/HIG/Router/22-year/RT6600ax/enu/Syno_HIG_RT6600ax_enu.pdf", "source_name": "Synology — RT6600ax Hardware Installation Guide (PDF)", "source_archive_url": "https://web.archive.org/web/20260729071030/https://global.download.synology.com/download/Document/Hardware/HIG/Router/22-year/RT6600ax/enu/Syno_HIG_RT6600ax_enu.pdf", "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/synology-rt6600ax" }, { "slug": "synology-wrx560", "brand": "Synology", "model": "WRX560 (WiFi 6 Mesh Router)", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": "router.synology.com", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "No default password. Like all Synology routers running SRM, the WRX560 requires you to create the administrator account during first-time setup, so the login is user-defined rather than a factory default.", "reset_steps": "Connect by Ethernet, or join WiFi SSID Synology_(Serial) with password 'synology'. Browse to http://router.synology.com (or http://192.168.1.1:8000) and complete the SRM setup wizard, which prompts you to create your own administrator account. To reset, hold the RESET button ~4 seconds (soft reset) or ~10 seconds (full factory reset) until the router reboots.", "source_url": "https://global.download.synology.com/download/Document/Software/UserGuide/Os/SRM/1.3/enu/Syno_UsersGuide_Router_1.3_enu.pdf", "source_name": "Synology — SRM 1.3 Router User's Guide (PDF)", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/synology-wrx560" }, { "slug": "t-mobile-home-internet-gateway", "brand": "T-Mobile", "model": "T-Mobile 5G Home Internet Gateway (Nokia/Arcadyan/Sagemcom)", "category": "gateway", "default_gateway_ip": "192.168.12.1", "default_login_host": null, "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "app-only", "credential_note": "US 5G fixed-wireless home gateway. Primary setup and management is through the T-Life app with your T-Mobile ID — there is no universal admin password. A web GUI also exists at http://192.168.12.1 (username admin); its default admin password is the unique value on the device label (on Arcadyan/Nokia units, revealed via the on-screen 'Where is my password?' link).", "reset_steps": "Hold the reset button on the gateway for ~10 seconds until it restarts. Primary management is re-run through the T-Life app; the web-GUI admin password reverts to the unique value printed on the device label.", "source_url": "https://www.t-mobile.com/support/home-internet/t-mobile-gateway", "source_name": "T-Mobile Official Support — T-Mobile Internet Gateway Setup", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/t-mobile-home-internet-gateway" }, { "slug": "talktalk-wifi-hub", "brand": "TalkTalk", "model": "Wi-Fi Hub", "category": "gateway", "default_gateway_ip": "192.168.1.1", "default_login_host": null, "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "Login details are on the sticker under the removable settings card on the back of the hub. TalkTalk's own guidance notes that only older/generic units fall back to admin/admin — current Wi-Fi Hubs use the printed unique credentials.", "reset_steps": "To log in: connect to the hub, browse to 192.168.1.1 and enter the username and password from the sticker underneath the removable settings card on the back of the Wi-Fi Hub. To factory reset: with the hub on, press and hold the recessed Reset button on the back for about 15 seconds until it restarts; credentials revert to the values on the back-of-hub sticker.", "source_url": "https://help-centre.talktalk.co.uk/Broadband/Manage_my_network_and_devices/Change_your_router_admin_password", "source_name": "TalkTalk Help & Support — Change your router admin password", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/talktalk-wifi-hub" }, { "slug": "telstra-smart-modem-gen-2", "brand": "Telstra", "model": "Telstra Smart Modem Gen 2 (and Gen 1.1)", "category": "gateway", "default_gateway_ip": "192.168.0.1", "default_login_host": "mymodem", "default_username": "admin", "default_password": "Telstra", "default_password_blank": false, "credential_type": "static", "credential_note": "Australian NBN/hybrid gateway (Technicolor/Netgear-built). Unlike the Gen 3, the Gen 2/1.1 uses a fixed documented admin login — username admin, password Telstra — reached at http://mymodem or http://192.168.0.1. Telstra advises changing it after setup.", "reset_steps": "Hold the reset button on the back of the modem for about 10 seconds until it restarts; login returns to username admin / password Telstra.", "source_url": "https://www.telstra.com.au/support/internet-and-home-phone/access-modem-settings", "source_name": "Telstra Official Support — How do I access and use my modem settings?", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/telstra-smart-modem-gen-2" }, { "slug": "telstra-smart-modem-gen-3", "brand": "Telstra", "model": "Telstra Smart Modem Gen 3", "category": "gateway", "default_gateway_ip": "192.168.0.1", "default_login_host": "mymodem", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "Australian NBN gateway (Frontier/Arcadyan-built). Reached at http://mymodem or http://192.168.0.1 with username admin — but unlike the Gen 2 there is no fixed password: the admin password is the unique Wi-Fi password printed on the sticker on the bottom of the modem.", "reset_steps": "Hold the reset button on the back of the modem for about 10 seconds until it restarts; the admin password reverts to the Wi-Fi password printed on the base label.", "source_url": "https://www.telstra.com.au/support/internet-and-home-phone/access-modem-settings", "source_name": "Telstra Official Support — How do I access and use my modem settings?", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/telstra-smart-modem-gen-3" }, { "slug": "telus-wifi-hub", "brand": "TELUS", "model": "TELUS Wi-Fi Hub (Actiontec T3200M)", "category": "gateway", "default_gateway_ip": "192.168.1.254", "default_login_host": "192.168.1.254", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "PureFibre/copper gateway supplied by TELUS across Canada. Admin UI at 192.168.1.254, username admin, password printed on the side of the modem under 'GUI Access' — device-unique, not a shared static default, per TELUS's own support article.", "reset_steps": "Locate the grey Factory Reset button on the back of the device. Using a thin object (pushpin, paper clip, or toothpick), press and hold the reset button until the Internet light turns red, then release. The modem restarts automatically — allow up to 10 minutes.", "source_url": "https://www.telus.com/en/business/support/article/troubleshoot-boost-wifi-actiontec-t3200m", "source_name": "TELUS Business Support — Troubleshoot: Boost Wi-Fi (TELUS Wi-Fi Hub) (official)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/telus-wifi-hub" }, { "slug": "tenda-ac10", "brand": "Tenda", "model": "AC10 (AC1200)", "category": "router", "default_gateway_ip": "192.168.0.1", "default_login_host": "tendawifi.com", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "No admin/admin default — on first access via tendawifi.com you create the admin password. Any aggregator listing admin/admin for Tenda is wrong for this model.", "reset_steps": "With the router on, hold the RESET pinhole ~5–7 seconds until it reboots to factory defaults.", "source_url": "https://www.tendacn.com/faq/2003605", "source_name": "Tenda official — How to login to the web management page", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/tenda-ac10" }, { "slug": "tenda-ac21", "brand": "Tenda", "model": "AC21 (AC2100)", "category": "router", "default_gateway_ip": "192.168.0.1", "default_login_host": "tendawifi.com", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "AC2100 dual-band hardware. Tenda ships no universal credential for the AC21 — the label on the back carries a Wireless Password unique to that unit, and that is what gets you through the very first login at tendawifi.com. The setup wizard then splits them: one password for the wireless, another for management.", "reset_steps": "Reset: with the router powered on, hold the RESET pinhole down for roughly 5-8 seconds with a pin until the LEDs blink, release, then allow about a minute to reboot. Reconnect to the default Tenda_XXXXXX SSID using the rear-label password, open tendawifi.com or 192.168.0.1, and run the wizard to choose a fresh management password.", "source_url": "https://www.tendacn.com/faq/2003605", "source_name": "Tenda Official Support - How to login to the web management page", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/tenda-ac21" }, { "slug": "tenda-ac23", "brand": "Tenda", "model": "AC23", "category": "router", "default_gateway_ip": "192.168.0.1", "default_login_host": "tendawifi.com", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "No admin/admin default — the admin password is set on first access via tendawifi.com.", "reset_steps": "With the router on, hold the RESET pinhole ~7 seconds until it reboots to factory defaults.", "source_url": "https://www.tendacn.com/faq/2003605", "source_name": "Tenda official — How to login to the web management page", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/tenda-ac23" }, { "slug": "tenda-ac8", "brand": "Tenda", "model": "AC8 (AC1200)", "category": "router", "default_gateway_ip": "192.168.0.1", "default_login_host": "tendawifi.com", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "The AC8 is an AC1200 dual-band router. There is no admin/admin here: on current Tenda firmware the first browser session at tendawifi.com asks for the Wireless Password from the sticker on the router's rear, and the wizard that follows has you create separate WiFi and login passwords.", "reset_steps": "Reset: with the router powered on, use a pin to press and hold the RESET hole for about 5-8 seconds until the LEDs blink, then release and wait ~1 minute for reboot. Rejoin the stock Tenda_XXXXXX network with the label password, browse to tendawifi.com or 192.168.0.1, and let the wizard set a new login password.", "source_url": "https://www.tendacn.com/faq/2003605", "source_name": "Tenda Official Support - How to login to the web management page", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/tenda-ac8" }, { "slug": "tenda-ax12", "brand": "Tenda", "model": "AX12 (AX1500/AX3000)", "category": "router", "default_gateway_ip": "192.168.0.1", "default_login_host": "tendawifi.com", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "Tenda's AX12 is WiFi 6 (AX1500/AX3000). No shared default password exists for it. The first management session at tendawifi.com is authenticated with the per-unit Wireless Password from the rear sticker, and you then define your own wireless and login passwords in the setup flow.", "reset_steps": "Reset: with power on, hold the RESET pinhole with a pin for about 5-8 seconds until the LEDs blink, let go, and wait roughly a minute for the reboot. Reconnect to the default Tenda_XXXXXX network using the sticker password, load tendawifi.com or 192.168.0.1, and finish setup with a new login password.", "source_url": "https://www.tendacn.com/faq/2003605", "source_name": "Tenda Official Support - How to login to the web management page", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/tenda-ax12" }, { "slug": "tenda-nova-mw6", "brand": "Tenda", "model": "Nova MW6 (mesh)", "category": "mesh", "default_gateway_ip": null, "default_login_host": null, "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "app-only", "credential_note": "Tenda Nova mesh is set up through the Tenda WiFi app, not admin/admin. There is no universal web password; the app account and the label Wi-Fi password control access.", "reset_steps": "Reset a node: press and hold its RESET button for about 8 seconds until the LED turns solid red, then release and wait for it to reboot to factory state. Re-add the node in the Tenda WiFi app to reconfigure the mesh.", "source_url": "https://www.tendacn.com/material/show/819035977883717", "source_name": "Tenda Official - How to Log into the Management Page/Web UI", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/tenda-nova-mw6" }, { "slug": "tenda-rx3", "brand": "Tenda", "model": "RX3 (AX1800)", "category": "router", "default_gateway_ip": "192.168.0.1", "default_login_host": "tendawifi.com", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "The RX3 runs WiFi 6 at AX1800. Nothing like admin/admin exists on it. Its firmware gates the opening tendawifi.com login behind the Wireless Password unique to that unit, printed on the rear label; afterwards the wizard asks you for two new passwords, one wireless and one for logging in.", "reset_steps": "Reset: while powered, insert a pin into the RESET hole and keep it held around 5-8 seconds until the LEDs blink. Release and give it a minute to come back. Join the factory Tenda_XXXXXX network with the label's password, go to tendawifi.com or 192.168.0.1, and complete the wizard with a new login password.", "source_url": "https://www.tendacn.com/faq/2003605", "source_name": "Tenda Official Support - How to login to the web management page", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/tenda-rx3" }, { "slug": "three-5g-hub-mc801a", "brand": "Three", "model": "5G Hub (ZTE MC801A)", "category": "gateway", "default_gateway_ip": "192.168.0.1", "default_login_host": null, "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "Login credentials are unique per unit and printed on the base of the hub, not a shared static default. Three's official device support: 'Locate your hub's webUI login credentials. This can be found on the base of the hub.'", "reset_steps": "ZTE-made 5G indoor hub (Qualcomm SDX55M modem, Wi-Fi 6, USB-C, 2x gigabit LAN, up to 32 connected devices). Three's own device support does not publish a reset-button procedure on this page — use the Three app or contact Three support to reset or retrieve credentials.", "source_url": "https://devicesupport.three.co.uk/guides/device/Three/5GHubMC801A/scenario/login-to-the-router-management-interface", "source_name": "Three Device Support — Three 5G Hub MC801A (official)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/three-5g-hub-mc801a" }, { "slug": "totolink-n300ra", "brand": "Totolink", "model": "N300RA", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": null, "default_username": "admin", "default_password": "admin", "default_password_blank": false, "credential_type": "static", "credential_note": "Totolink's official support documents a genuine universal default for this N-series: username admin and password admin at 192.168.1.1. Because it is public, change both immediately after logging in.", "reset_steps": "Reset: with the router powered on, press and hold the RESET button for about 10 seconds until the LEDs blink, then release and wait for reboot. Browse to http://192.168.1.1, log in with admin / admin, then open Advanced Setup > System > Admin Setup to set new credentials.", "source_url": "https://m.totolink.net/portal/article/index/id/22/cid/6.html", "source_name": "Totolink Official - How to modify the user name and password", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/totolink-n300ra" }, { "slug": "tp-link-archer-a7-c7", "brand": "TP-Link", "model": "Archer A7 / C7 (AC1750)", "category": "router", "default_gateway_ip": "192.168.0.1", "default_login_host": "tplinkwifi.net", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "Current v5 firmware requires creating a login password. Legacy hardware revisions (C7 v1–v4) historically shipped admin/admin, but that isn't stated on a single current official page.", "reset_steps": "Log in at http://tplinkwifi.net; on current (v5) firmware you create a login password on first login. To reset, hold Reset until the Power LED blinks, then create a new password.", "source_url": "https://www.tp-link.com/us/user-guides/archer-a7&c7_v5/faq", "source_name": "TP-Link official Archer A7 & C7 (v5) User Guide (FAQ)", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/tp-link-archer-a7-c7" }, { "slug": "tp-link-archer-ax10", "brand": "TP-Link", "model": "Archer AX10 (AX1500)", "category": "router", "default_gateway_ip": "192.168.0.1", "default_login_host": "tplinkwifi.net", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "AX1500 is entry-level WiFi 6, and the Archer AX10 handles credentials the same way the rest of the range does: the first login is where you create the admin password, because current firmware carries none. Wireless SSID and key live on the underside label and are unrelated to that password.", "reset_steps": "Powered up, press the recessed Reset button on the back with a pin and hold near 10 seconds until the LEDs blink; release and wait for the reboot to factory defaults. Reconnect using the underside label's wireless name and key, visit http://tplinkwifi.net or 192.168.0.1, and create the admin password anew.", "source_url": "https://www.tp-link.com/us/user-guides/archer-ax10&ax1500_v1/faq/", "source_name": "TP-Link Official — Archer AX10 & AX1500 User Guide", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/tp-link-archer-ax10" }, { "slug": "tp-link-archer-ax21", "brand": "TP-Link", "model": "Archer AX21 (AX1800)", "category": "router", "default_gateway_ip": "192.168.0.1", "default_login_host": "tplinkwifi.net", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "You log in with the password you set for the router; there is no factory admin/admin.", "reset_steps": "Visit http://tplinkwifi.net and create a login password on first setup. To reset, hold Reset until the LEDs turn on, then create a new password.", "source_url": "https://www.tp-link.com/us/user-guides/archer-ax20&ax1800_v1/faq", "source_name": "TP-Link official Archer AX20 & AX1800 User Guide (FAQ)", "source_archive_url": "https://web.archive.org/web/20260226060400/https://www.tp-link.com/us/user-guides/archer-ax20&ax1800_v1/faq", "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/tp-link-archer-ax21" }, { "slug": "tp-link-archer-ax23", "brand": "TP-Link", "model": "Archer AX23 (AX1800)", "category": "router", "default_gateway_ip": "192.168.0.1", "default_login_host": "tplinkwifi.net", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "An AX1800 dual-band WiFi 6 router with no shared password behind it. Current TP-Link firmware treats the first web login as a registration step — you define the admin password, and there is nothing to type in a username box. Wireless SSID and key are separate values, printed on the label beneath the chassis.", "reset_steps": "While powered, push a pin into the recessed Reset button on the back and hold about 10 seconds; the LEDs blink, then release. A reboot returns factory defaults. Reconnect to the stock AX1800 network using the underside label, visit http://tplinkwifi.net or 192.168.0.1, and define the admin password once more.", "source_url": "https://www.tp-link.com/us/support/faq/87/", "source_name": "TP-Link Official Support — How to log in to the web management page", "source_archive_url": "https://web.archive.org/web/20260729064704/https://www.tp-link.com/us/support/faq/87/", "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/tp-link-archer-ax23" }, { "slug": "tp-link-archer-ax50", "brand": "TP-Link", "model": "Archer AX50", "category": "router", "default_gateway_ip": "192.168.0.1", "default_login_host": "tplinkwifi.net", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "AX3000 dual-band Wi-Fi 6 router (Intel chipset, 4 external antennas, 4x gigabit LAN + 1 gigabit WAN) — distinct hardware from the Archer AX55 (Qualcomm chipset) already covered. Official user guide: log in at http://tplinkwifi.net with your TP-Link ID or the password you set for the router — no factory admin/admin.", "reset_steps": "Press and hold the RESET button on the back of the router (recessed, use a pin) for about 5-10 seconds until the LEDs flash, then release to restore factory defaults.", "source_url": "https://www.tp-link.com/us/user-guides/archer-ax50_v1/faq", "source_name": "TP-Link official Archer AX50 V1 User Guide (FAQ)", "source_archive_url": "https://web.archive.org/web/20260727184252/https://www.tp-link.com/us/user-guides/archer-ax50_v1/faq", "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/tp-link-archer-ax50" }, { "slug": "tp-link-archer-ax55", "brand": "TP-Link", "model": "Archer AX55", "category": "router", "default_gateway_ip": "192.168.0.1", "default_login_host": "tplinkwifi.net", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "Modern TP-Link firmware forces you to create an admin password on first login — there is no admin/admin default and no username field.", "reset_steps": "Visit http://tplinkwifi.net and create an admin password on first setup. To reset, hold the Reset button until the Power LED blinks, then set a new password.", "source_url": "https://www.tp-link.com/us/support/faq/87/", "source_name": "TP-Link official support (FAQ 87 — Router Login)", "source_archive_url": "https://web.archive.org/web/20260729064704/https://www.tp-link.com/us/support/faq/87/", "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/tp-link-archer-ax55" }, { "slug": "tp-link-archer-ax55-pro", "brand": "TP-Link", "model": "Archer AX55 Pro (AX3000)", "category": "router", "default_gateway_ip": "192.168.0.1", "default_login_host": "tplinkwifi.net", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "AX3000 dual-band Multi-Gig Wi-Fi 6 router with a 2.5 Gbps port and USB 3.0 — the 'Pro' Multi-Gig variant, a distinct SKU from the Archer AX55 already covered. Ethernet-based; no admin/admin default — a login password is created on first setup with no username. TP-Link: \"Visit http://tplinkwifi.net, and create a login password for secure management purposes.\"", "reset_steps": "Hold the Reset button until the Power LED blinks to restore factory defaults, then browse to http://tplinkwifi.net to create a new login password.", "source_url": "https://static.tp-link.com/upload/manual/2024/202403/20240319/1910013433_Archer%20AX55%20Pro(US)2.0_UG_V1.pdf", "source_name": "TP-Link Archer AX55 Pro (US) V2.0 User Guide — official PDF", "source_archive_url": "https://web.archive.org/web/20260809221525/https://static.tp-link.com/upload/manual/2024/202403/20240319/1910013433_Archer%20AX55%20Pro(US)2.0_UG_V1.pdf", "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/tp-link-archer-ax55-pro" }, { "slug": "tp-link-archer-ax72", "brand": "TP-Link", "model": "Archer AX72 (AX5400)", "category": "router", "default_gateway_ip": "192.168.0.1", "default_login_host": "tplinkwifi.net", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "AX5400 dual-band Wi-Fi 6 (802.11ax) 6-stream router with Gigabit WAN/LAN (Ethernet, non-DSL). No admin/admin default — the web UI forces you to create a login password on first setup, with no username field. TP-Link: \"Visit http://tplinkwifi.net, and create a login password for secure management purposes.\"", "reset_steps": "Hold the Reset button until the Power LED blinks to restore factory defaults, then visit http://tplinkwifi.net to create a new login password.", "source_url": "https://www.tp-link.com/us/user-guides/archer-ax72_v1/chapter-3-log-into-your-router", "source_name": "TP-Link Archer AX72 V1 User Guide (official)", "source_archive_url": "https://web.archive.org/web/20260809221508/https://www.tp-link.com/us/user-guides/archer-ax72_v1/chapter-3-log-into-your-router", "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/tp-link-archer-ax72" }, { "slug": "tp-link-archer-ax73", "brand": "TP-Link", "model": "Archer AX73 (AX5400)", "category": "router", "default_gateway_ip": "192.168.0.1", "default_login_host": "tplinkwifi.net", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "AX5400 puts the Archer AX73 in WiFi 6 territory, but its login model is the plain one: nothing ships preset. The create-password screen is the first thing the web UI shows, and whatever you type there is the password from then on. The bottom label carries only the wireless name and key, never the admin password.", "reset_steps": "Switch the router on, insert a pin into the recessed Reset button on the back, and keep it down for around 10 seconds until the LEDs blink. Release and let it reboot to factory defaults. Get back on the default WiFi with the label credentials, go to http://tplinkwifi.net or 192.168.0.1, and set the admin password again.", "source_url": "https://www.tp-link.com/us/support/faq/87/", "source_name": "TP-Link Official Support — How to log in to the web management page", "source_archive_url": "https://web.archive.org/web/20260729064704/https://www.tp-link.com/us/support/faq/87/", "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/tp-link-archer-ax73" }, { "slug": "tp-link-archer-ax90", "brand": "TP-Link", "model": "Archer AX90 (AX6600)", "category": "router", "default_gateway_ip": "192.168.0.1", "default_login_host": "tplinkwifi.net", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "Archer AX90 is the non-gaming tri-band AX6600 sibling. Its web UI has no factory password to guess: the initial page asks you to establish one, with no username alongside. The label under the router lists the wireless name and key only.", "reset_steps": "Hold the recessed Reset button roughly 10 seconds with a pin while the unit is running, and release at the LED blink. After the restart everything is back to factory defaults. Join the label-printed wireless network, browse to http://tplinkwifi.net or 192.168.0.1, and establish a new admin password.", "source_url": "https://www.tp-link.com/us/support/faq/87/", "source_name": "TP-Link Official Support — How to log in to the web management page", "source_archive_url": "https://web.archive.org/web/20260729064704/https://www.tp-link.com/us/support/faq/87/", "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/tp-link-archer-ax90" }, { "slug": "tp-link-archer-axe75", "brand": "TP-Link", "model": "Archer AXE75 (AXE5400)", "category": "router", "default_gateway_ip": "192.168.0.1", "default_login_host": "tplinkwifi.net", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "Official setup guide instructs you to create a login password for secure management; no default password, no username field.", "reset_steps": "Visit http://tplinkwifi.net and create a login password for management on first setup. To reset, hold Reset until the LED blinks, then create a new password.", "source_url": "https://www.tp-link.com/us/document/111343/", "source_name": "TP-Link official Archer AXE75 v2 Installation & User Guide", "source_archive_url": "https://web.archive.org/web/20260729064746/https://www.tp-link.com/us/document/111343/", "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/tp-link-archer-axe75" }, { "slug": "tp-link-archer-be550", "brand": "TP-Link", "model": "Archer BE550 (BE9300)", "category": "router", "default_gateway_ip": "192.168.0.1", "default_login_host": "tplinkwifi.net", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "The BE9300-class Archer BE550 is a WiFi 7 router whose admin password simply does not exist until you type it. TP-Link's current firmware opens on a password-creation prompt rather than a login box, and no username is involved. Bottom-label printing covers the wireless SSID and key, nothing more.", "reset_steps": "Keep the recessed Reset button pressed with a pin for roughly 10 seconds while powered, releasing once the LEDs change. Factory defaults return after the reboot. Attach to the default wireless network shown on the bottom label, open http://tplinkwifi.net or 192.168.0.1, and type a new admin password at the prompt.", "source_url": "https://www.tp-link.com/us/support/faq/87/", "source_name": "TP-Link Official Support — How to log in to the web management page", "source_archive_url": "https://web.archive.org/web/20260729064704/https://www.tp-link.com/us/support/faq/87/", "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/tp-link-archer-be550" }, { "slug": "tp-link-archer-be800", "brand": "TP-Link", "model": "Archer BE800 (BE19000)", "category": "router", "default_gateway_ip": "192.168.0.1", "default_login_host": "tplinkwifi.net", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "BE19000 marks the Archer BE800 as WiFi 7 hardware. The login flow did not change with the generation: no default password ships, and the first time you reach the web UI it asks you to make one up. The wireless name and key printed on the bottom label are not the admin credential.", "reset_steps": "With the router on, use a pin to hold the recessed Reset button for about 10 seconds until the LEDs change, then let go. It reboots to factory defaults. Reconnect over the default wireless network named on the bottom label, load http://tplinkwifi.net or 192.168.0.1, and make up a new admin password.", "source_url": "https://www.tp-link.com/us/support/faq/87/", "source_name": "TP-Link Official Support — How to log in to the web management page", "source_archive_url": "https://web.archive.org/web/20260729064704/https://www.tp-link.com/us/support/faq/87/", "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/tp-link-archer-be800" }, { "slug": "tp-link-archer-c1200", "brand": "TP-Link", "model": "Archer C1200 (AC1200)", "category": "router", "default_gateway_ip": "192.168.0.1", "default_login_host": "tplinkwifi.net", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "This is an older model: the earliest firmware used admin / admin, but current firmware requires you to create your own admin password on first login. If admin/admin does not work, the router has already prompted for (and you set) a custom password. The default Wi-Fi details are on the bottom label.", "reset_steps": "With the router powered on, use a pin to press and hold the recessed Reset button on the back for about 10 seconds until the LEDs blink, then release. The router reboots to factory defaults. Reconnect to the default Wi-Fi (SSID and password on the bottom label), open http://tplinkwifi.net or 192.168.0.1, and log in or create the admin password.", "source_url": "https://www.tp-link.com/us/support/faq/87/", "source_name": "TP-Link Official Support — How to log in to the web management page", "source_archive_url": "https://web.archive.org/web/20260729064704/https://www.tp-link.com/us/support/faq/87/", "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/tp-link-archer-c1200" }, { "slug": "tp-link-archer-c5", "brand": "TP-Link", "model": "Archer C5", "category": "router", "default_gateway_ip": "192.168.0.1", "default_login_host": "tplinkwifi.net", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "Per TP-Link's official login guide, newer TP-Link models (including current Archer C5 firmware) require you to create a custom admin password on first login; only older units used admin / admin. When ACT Fibernet supplies an Archer C5 it may be pre-provisioned with an ISP-set password (commonly on the install slip), so admin/admin should not be assumed.", "reset_steps": "Connect to the router by Wi-Fi (default network name/password are on the router label) or LAN, then open http://tplinkwifi.net or http://192.168.0.1 in a browser. On current firmware you are prompted to create your own admin password on first login — there is no admin/admin. If you forget it, press and hold the recessed RESET button for about 10 seconds until the router reboots, then reopen tplinkwifi.net and create a new password.", "source_url": "https://www.tp-link.com/us/support/faq/87/", "source_name": "TP-Link — How to Log In to Your TP-Link Router", "source_archive_url": "https://web.archive.org/web/20260729064704/https://www.tp-link.com/us/support/faq/87/", "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/tp-link-archer-c5" }, { "slug": "tp-link-archer-c54", "brand": "TP-Link", "model": "Archer C54 (AC1200)", "category": "router", "default_gateway_ip": "192.168.0.1", "default_login_host": "tplinkwifi.net", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "The Archer C54 is an AC1200 dual-band unit. Its management password has no factory value: the first visit to the admin UI is a create-a-password screen, and there is no username field beside it. The wireless key you need to get onto the network in the first place is on the bottom label.", "reset_steps": "Hold the recessed rear Reset button with a pin for about 10 seconds while the router is on, releasing when the LEDs blink. It restarts at factory defaults. Reconnect over the default AC1200 wireless network (name and key on the bottom label), open http://tplinkwifi.net or 192.168.0.1, and create a replacement admin password.", "source_url": "https://www.tp-link.com/us/support/faq/87/", "source_name": "TP-Link Official Support — How to log in to the web management page", "source_archive_url": "https://web.archive.org/web/20260729064704/https://www.tp-link.com/us/support/faq/87/", "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/tp-link-archer-c54" }, { "slug": "tp-link-archer-c6", "brand": "TP-Link", "model": "Archer C6", "category": "router", "default_gateway_ip": "192.168.0.1", "default_login_host": "tplinkwifi.net", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "Directories that print admin/admin for the Archer C6 are quoting a default this 802.11ac router never had. Firmware blocks you at the first login screen until you supply a password of your own choosing. Separately, the factory wireless SSID and its key are silkscreened on the sticker underneath.", "reset_steps": "Power on, then hold the recessed Reset button on the back with a pin for roughly 10 seconds — release once the LEDs blink. Factory defaults come back after the reboot. Join the stock wireless network using the sticker credentials, load http://tplinkwifi.net or 192.168.0.1, and choose a fresh admin password at the prompt.", "source_url": "https://www.tp-link.com/us/support/faq/87/", "source_name": "TP-Link Official Support — How to log in to the web management page", "source_archive_url": "https://web.archive.org/web/20260729064704/https://www.tp-link.com/us/support/faq/87/", "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/tp-link-archer-c6" }, { "slug": "tp-link-archer-c80", "brand": "TP-Link", "model": "Archer C80", "category": "router", "default_gateway_ip": "192.168.0.1", "default_login_host": "tplinkwifi.net", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "Two passwords matter on an Archer C80 and they are not the same thing. The WiFi 5 (802.11ac) network name and key are printed on the underside label. The admin password is not printed anywhere — current Archer firmware makes you invent one at first login, so admin/admin does not apply.", "reset_steps": "With the router powered on, use a pin to press and hold the recessed Reset button on the back for about 10 seconds until the LEDs blink, then release. The router reboots to factory defaults. Rejoin the default WiFi with the SSID and key from the bottom label, browse to http://tplinkwifi.net or 192.168.0.1, and invent a new admin password when prompted.", "source_url": "https://www.tp-link.com/us/support/faq/87/", "source_name": "TP-Link Official Support — How to log in to the web management page", "source_archive_url": "https://web.archive.org/web/20260729064704/https://www.tp-link.com/us/support/faq/87/", "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/tp-link-archer-c80" }, { "slug": "tp-link-archer-gx90", "brand": "TP-Link", "model": "Archer GX90 (AX6600 Gaming)", "category": "router", "default_gateway_ip": "192.168.0.1", "default_login_host": "tplinkwifi.net", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "The gaming-line Archer GX90 is a tri-band AX6600 box, and it authenticates like every current Archer: you create the admin password the first time the web UI loads. No factory pair exists. What is preprinted on the bottom label is the wireless network name and its key, which is a different credential.", "reset_steps": "With power applied, hold the recessed Reset button for about 10 seconds using a pin, letting go when the LEDs blink. The GX90 reboots into factory defaults. Rejoin the default wireless network from the label, open http://tplinkwifi.net or 192.168.0.1, and create the admin password again.", "source_url": "https://www.tp-link.com/us/support/faq/87/", "source_name": "TP-Link Official Support — How to log in to the web management page", "source_archive_url": "https://web.archive.org/web/20260729064704/https://www.tp-link.com/us/support/faq/87/", "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/tp-link-archer-gx90" }, { "slug": "tp-link-deco-be65", "brand": "TP-Link", "model": "Deco BE65", "category": "mesh", "default_gateway_ip": null, "default_login_host": null, "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "app-only", "credential_note": "BE11000 tri-band Wi-Fi 7 whole-home mesh unit, 2.4/5/6 GHz with MLO, four 2.5 Gbps WAN/LAN ports and USB 3.0 per unit — a Wi-Fi 7 tier above the dual-band Deco X50/X55 and distinct from the BE22000 Deco BE85 already covered. App-only setup via the TP-Link Deco app with a TP-Link ID; you create your own Wi-Fi name/password and there is no web-admin default.", "reset_steps": "Press the Reset button for 1 second and release to reset the Deco to factory defaults (LED changes from pulsing yellow to solid yellow), then re-run setup in the TP-Link Deco app.", "source_url": "https://static.tp-link.com/upload/manual/2023/202310/20231017/1910013361_Deco%20BE65(US)1.0_User%20Guide_REV1.0.0.pdf", "source_name": "TP-Link Deco BE65 BE11000 Wi-Fi 7 Mesh System User Guide (1910013361) — official", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/tp-link-deco-be65" }, { "slug": "tp-link-deco-be85", "brand": "TP-Link", "model": "Deco BE85 (BE22000, WiFi 7)", "category": "mesh", "default_gateway_ip": "192.168.68.1", "default_login_host": "tplinkdeco.net", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "app-only", "credential_note": "BE22000 WiFi 7 mesh. The official install path is the Deco app signed in with a TP-Link ID; no universal default password exists. Web management at tplinkdeco.net (192.168.68.1) uses that same TP-Link ID password.", "reset_steps": "Use Reset inside the Deco app, or hold the physical Reset button on a Deco unit until the light pulses and set it up again in the app.", "source_url": "https://www.tp-link.com/us/support/faq/2641/", "source_name": "TP-Link official FAQ 2641 (Deco web management access)", "source_archive_url": "https://web.archive.org/web/20260729071733/https://www.tp-link.com/us/support/faq/2641/", "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/tp-link-deco-be85" }, { "slug": "tp-link-deco-m4", "brand": "TP-Link", "model": "Deco M4", "category": "mesh", "default_gateway_ip": null, "default_login_host": null, "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "app-only", "credential_note": "Deco M4 units are managed the way every Deco is: from the phone app, tied to a TP-Link ID login. No browser-based admin page exists, so no factory admin/admin can exist either. Whoever runs the initial install picks the wireless name and passphrase.", "reset_steps": "With a pin, depress Reset on the bottom of the node for about a second. The light flashes yellow while clearing, turns steady yellow while restarting, and pulses blue once defaults are restored. Setup then starts over inside the Deco app after you sign in to your TP-Link ID.", "source_url": "https://www.tp-link.com/us/support/faq/1592/", "source_name": "TP-Link Official Support — Deco Setup Guide", "source_archive_url": "https://web.archive.org/web/20260729065651/https://www.tp-link.com/us/support/faq/1592/", "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/tp-link-deco-m4" }, { "slug": "tp-link-deco-x20", "brand": "TP-Link", "model": "Deco X20", "category": "mesh", "default_gateway_ip": null, "default_login_host": null, "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "app-only", "credential_note": "Lists that publish a default admin password for the Deco X20 are describing hardware it does not have. This WiFi 6 node offers no web interface at all — management happens only in the Deco app under a TP-Link ID account, and the wireless name plus its password are ones you pick yourself at install time.", "reset_steps": "Hold the bottom-mounted Reset button down with a pin for around one second. Yellow flashing shows the erase running, steady yellow covers the restart, and blue pulsing confirms the unit sits at factory defaults again. Re-provisioning means opening the Deco app, signing into your TP-Link ID, and naming the network once more.", "source_url": "https://www.tp-link.com/us/support/faq/1592/", "source_name": "TP-Link Official Support — Deco Setup Guide", "source_archive_url": "https://web.archive.org/web/20260729065651/https://www.tp-link.com/us/support/faq/1592/", "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/tp-link-deco-x20" }, { "slug": "tp-link-deco-x50", "brand": "TP-Link", "model": "Deco X50", "category": "mesh", "default_gateway_ip": null, "default_login_host": null, "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "app-only", "credential_note": "The credential that matters on a Deco X50 is your TP-Link ID, not a router password. Setup, firmware and every setting live inside the Deco phone app; there is no web console to point a browser at. The WiFi 6 network name and passphrase get defined during that first app-guided install.", "reset_steps": "A pin into the Reset hole on the underside, held for about a second, starts the wipe. The indicator flashes yellow during the reset, goes solid yellow through the reboot, then pulses blue once the node is back at factory defaults. From there the Deco app plus your TP-Link ID re-provisions it from scratch.", "source_url": "https://www.tp-link.com/us/support/faq/1592/", "source_name": "TP-Link Official Support — Deco Setup Guide", "source_archive_url": "https://web.archive.org/web/20260729065651/https://www.tp-link.com/us/support/faq/1592/", "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/tp-link-deco-x50" }, { "slug": "tp-link-deco-x50-outdoor", "brand": "TP-Link", "model": "Deco X50-Outdoor", "category": "mesh", "default_gateway_ip": null, "default_login_host": null, "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "app-only", "credential_note": "AX3000 dual-band Wi-Fi 6 weatherproof outdoor/indoor mesh unit, 2.4/5 GHz, two gigabit ports with 802.3at PoE or AC power, pole/wall/tabletop mount — the outdoor-rated SKU distinct from the indoor Deco X50 already covered. App-only setup via the TP-Link Deco app with a TP-Link ID; you create your own Wi-Fi credentials and there is no web-admin default.", "reset_steps": "Press the Reset button for 1 second and release to reset the Deco to factory defaults (light changes from pulsing yellow to solid yellow), then re-run setup in the TP-Link Deco app.", "source_url": "https://static.tp-link.com/upload/manual/2022/202212/20221226/1910013300_Deco%20X50-Outdoor_UG_REV1.0.0.pdf", "source_name": "TP-Link Deco X50-Outdoor AX3000 Outdoor Mesh Wi-Fi 6 User Guide (1910013300) — official", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/tp-link-deco-x50-outdoor" }, { "slug": "tp-link-deco-x55", "brand": "TP-Link", "model": "Deco X55", "category": "mesh", "default_gateway_ip": null, "default_login_host": null, "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "app-only", "credential_note": "Deco X55 is a WiFi 6 mesh node, and nodes in this family expose no browser login page whatsoever. Everything runs through the Deco mobile app, authenticated with a TP-Link ID. No admin/admin exists because no admin console exists; the wireless name and its password are ones you choose while the app walks through setup.", "reset_steps": "Press the recessed Reset button underneath the unit with a pin and hold roughly one second. Watch the LED: flashing yellow means it is clearing, solid yellow means it is rebooting, and a pulsing blue glow means factory state has been reached. Launch the Deco app, sign in with your TP-Link ID, and build the network again.", "source_url": "https://www.tp-link.com/us/support/faq/1592/", "source_name": "TP-Link Official Support — Deco Setup Guide", "source_archive_url": "https://web.archive.org/web/20260729065651/https://www.tp-link.com/us/support/faq/1592/", "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/tp-link-deco-x55" }, { "slug": "tp-link-deco-x60", "brand": "TP-Link", "model": "Deco X60 (AX3000)", "category": "mesh", "default_gateway_ip": "192.168.68.1", "default_login_host": "tplinkdeco.net", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "app-only", "credential_note": "AX3000 mesh set up through the Deco app with a TP-Link ID — there is no device-specific default password. The web console at tplinkdeco.net (192.168.68.1) is secondary and signs in with your TP-Link ID password.", "reset_steps": "Reset from inside the Deco app, or hold the Reset button on the underside of a Deco unit until its LED pulses, then re-run setup in the Deco app.", "source_url": "https://www.tp-link.com/us/support/faq/2641/", "source_name": "TP-Link official FAQ 2641 (Deco web management access)", "source_archive_url": "https://web.archive.org/web/20260729071733/https://www.tp-link.com/us/support/faq/2641/", "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/tp-link-deco-x60" }, { "slug": "tp-link-deco-x68", "brand": "TP-Link", "model": "Deco X68", "category": "mesh", "default_gateway_ip": "192.168.68.1", "default_login_host": "tplinkdeco.net", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "app-only", "credential_note": "Tri-band Wi-Fi 6 mesh unit (AX3600-class, dedicated 5GHz backhaul band, 1.5GHz quad-core CPU, 2x gigabit ports per unit) — distinct hardware from the dual-band Deco X55/X60 already covered. Set up through the Deco app with a TP-Link ID; no device-specific default password. Web console at tplinkdeco.net (192.168.68.1) signs in with that same TP-Link ID password.", "reset_steps": "Reset from inside the Deco app, or hold the Reset button on the underside of a Deco unit until its LED pulses, then re-run setup in the Deco app.", "source_url": "https://www.tp-link.com/us/support/faq/2641/", "source_name": "TP-Link official FAQ 2641 (Deco web management access — applies to Deco X68)", "source_archive_url": "https://web.archive.org/web/20260727184312/https://www.tp-link.com/us/support/faq/2641/", "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/tp-link-deco-x68" }, { "slug": "tp-link-deco-xe200", "brand": "TP-Link", "model": "Deco XE200 (AXE11000)", "category": "mesh", "default_gateway_ip": null, "default_login_host": null, "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "app-only", "credential_note": "AXE11000 tri-band Whole-Home Mesh Wi-Fi 6E (adds the 6 GHz band) system. App-only: setup and administration run through the Deco app with a TP-Link ID — there is no web login host, no username, and no static default password. TP-Link's guide directs you to \"Download and install the Deco app\" to set up the system.", "reset_steps": "Press the Reset button for 1 second; the LED changing from pulsing yellow to solid yellow confirms the factory reset. Re-setup is done entirely in the Deco app.", "source_url": "https://static.tp-link.com/upload/manual/2022/202209/20220922/1910013222_Deco%20XE200_User%20Guide_REV1.0.0.pdf", "source_name": "TP-Link Deco XE200 User Guide REV1.0.0 — official PDF", "source_archive_url": "https://web.archive.org/web/20260809221534/https://static.tp-link.com/upload/manual/2022/202209/20220922/1910013222_Deco%20XE200_User%20Guide_REV1.0.0.pdf", "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/tp-link-deco-xe200" }, { "slug": "tp-link-deco-xe75", "brand": "TP-Link", "model": "Deco XE75 (AXE5400)", "category": "mesh", "default_gateway_ip": null, "default_login_host": null, "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "app-only", "credential_note": "An AXE5400 tri-band node, so the Deco XE75 adds a 6 GHz radio — but its login story matches the rest of the range: no web page, no shipped password. Control is via the Deco app with a TP-Link ID, and you define the SSID and its key during guided setup.", "reset_steps": "Use a pin on the Reset button beneath the node, holding roughly one second. Flashing yellow signals the clear, solid yellow the reboot, pulsing blue that factory defaults are live. Re-run the guided install in the Deco app with your TP-Link ID to recreate the network.", "source_url": "https://www.tp-link.com/us/support/faq/1592/", "source_name": "TP-Link Official Support — Deco Setup Guide", "source_archive_url": "https://web.archive.org/web/20260729065651/https://www.tp-link.com/us/support/faq/1592/", "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/tp-link-deco-xe75" }, { "slug": "tp-link-omada-eap225", "brand": "TP-Link", "model": "Omada EAP225", "category": "ap", "default_gateway_ip": "192.168.0.254", "default_login_host": "tplinkeap.net", "default_username": "admin", "default_password": "admin", "default_password_blank": false, "credential_type": "static", "credential_note": "AC1200 Wi-Fi 5 (802.11ac Wave 2) dual-band ceiling-mount indoor access point; runs standalone or under an Omada SDN controller. Standalone-mode default admin/admin confirmed by name in TP-Link's official EAP-series login FAQ (forced password change on first login).", "reset_steps": "Press and hold the recessed RESET button for about 5 seconds until the LED blinks, then release and wait for the AP to reboot to factory defaults.", "source_url": "https://www.tp-link.com/us/support/faq/1000/", "source_name": "TP-Link FAQ 1000 — How do I login to the web management page of the EAP Series products (Standalone mode)? (official)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/tp-link-omada-eap225" }, { "slug": "tp-link-omada-eap610", "brand": "TP-Link", "model": "Omada EAP610", "category": "ap", "default_gateway_ip": "192.168.0.254", "default_login_host": "tplinkeap.net", "default_username": "admin", "default_password": "admin", "default_password_blank": false, "credential_type": "static", "credential_note": "Wi-Fi 6 (AX1800) ceiling/wall-mount Omada access point with PoE, standalone or controller-managed — a newer AX-class tier above the AC-class EAP225 already covered. Same official TP-Link EAP-series login FAQ: default username and password are both 'admin' (all lowercase), forced change on first login.", "reset_steps": "Press and hold the Reset button for about 5 seconds until all LEDs flash, then release to restore factory defaults. Launch a browser to http://tplinkeap.net (or 192.168.0.254 if no DHCP) and log in with admin/admin.", "source_url": "https://www.tp-link.com/us/support/faq/1000/", "source_name": "TP-Link official FAQ 1000 — How do I login to the web management page of the EAP Series products (Standalone mode)? (applies to EAP610)", "source_archive_url": "https://web.archive.org/web/20260729073149/https://www.tp-link.com/us/support/faq/1000/", "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/tp-link-omada-eap610" }, { "slug": "tp-link-tl-wr841n", "brand": "TP-Link", "model": "TL-WR841N", "category": "router", "default_gateway_ip": "192.168.0.1", "default_login_host": "tplinkwifi.net", "default_username": "admin", "default_password": "admin", "default_password_blank": false, "credential_type": "static", "credential_note": "TP-Link's official TL-WR841N (through v14) user guide explicitly states the default username and password are both admin. This is one of the last mainstream models to keep a true admin/admin default — most TP-Link routers from ~2019 onward force you to create a password on first login instead.", "reset_steps": "Open a browser to http://tplinkwifi.net (or http://192.168.0.1) and log in with admin / admin (all lowercase). To factory reset, with the router powered on press and hold the Reset button on the back for about 10 seconds until the LEDs flash, then release; credentials revert to admin / admin.", "source_url": "https://www.tp-link.com/us/user-guides/tl-wr841n_v14/chapter-3-login", "source_name": "TP-Link TL-WR841N V14 User Guide (official)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/tp-link-tl-wr841n" }, { "slug": "tpg-nokia-fastmile-3-2-5g", "brand": "TPG", "model": "Nokia FastMile 3.2 5G Modem", "category": "gateway", "default_gateway_ip": "192.168.1.1", "default_login_host": null, "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "TPG's Nokia FastMile 3.2 fixed-wireless 5G modem (Wi-Fi 6, 5G/4G FWA for TPG Home Wireless Broadband). Username is admin; the admin password is unique per device, printed on the barcode sticker — not a shared static default.", "reset_steps": "Browse to https://192.168.1.1 and log in with username admin and the default password printed on the modem's barcode sticker. To reset, hold the recessed reset button until the modem restarts to factory defaults, then log in again with the sticker password.", "source_url": "https://support.tpg.com.au/basic-wi-fi-settings-tpg-modem", "source_name": "TPG Support — Basic Wi-Fi settings on a TPG modem (official)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/tpg-nokia-fastmile-3-2-5g" }, { "slug": "turris-mox", "brand": "Turris", "model": "Mox", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": "192.168.1.1", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "Modular open-source router (1GHz dual-core, Turris OS / OpenWrt-based), expandable via MOX B-G modules with Wi-Fi as an mPCIe/SDIO add-on. There is NO default password: the first step of the reForis wizard at http://192.168.1.1 (when MOX runs as DHCP server) has you set the administrative password. Advanced LuCI/SSH uses user 'root'.", "reset_steps": "Use the rear reset button's LED-count rescue modes; select the factory-reset mode and release to restore defaults and re-run the first-boot wizard.", "source_url": "https://docs.turris.cz/basics/first-setup/mox-first-setup/", "source_name": "Turris Documentation — MOX first setup", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/turris-mox" }, { "slug": "turris-omnia", "brand": "Turris", "model": "Omnia", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": "192.168.1.1", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "Open-source dual-band router running Turris OS (OpenWrt-based) with the reForis web admin. There is NO default password: you create the admin password in the first-boot reForis wizard at http://192.168.1.1. reForis login is password-only (no username); the advanced LuCI/SSH interface uses user 'root' with the same password.", "reset_steps": "Use the rear reset button to select a rescue mode by LED count; holding to the factory-reset count and releasing restores factory defaults and re-triggers the first-boot wizard.", "source_url": "https://docs.turris.cz/basics/first-setup/simple-setup/", "source_name": "Turris Documentation — First setup on Turris 1.X and Omnia", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/turris-omnia" }, { "slug": "amplifi-alien", "brand": "Ubiquiti", "model": "AmpliFi Alien", "category": "mesh", "default_gateway_ip": null, "default_login_host": "amplifi.lan", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "app-only", "credential_note": "App-only — no admin/admin default. The admin password is one you set during setup in the AmpliFi app. There is no password recovery, so a lost password means a factory reset.", "reset_steps": "AmpliFi Alien is administered through the AmpliFi mobile app. To factory reset: use a paperclip to hold the reset button on the bottom of the Alien router for 5 seconds, or until the screen shows 'rebooting', then release (reset MeshPoints first if part of a kit). Set it up again in the AmpliFi app, where you create a new administrator/Wi-Fi password.", "source_url": "https://help.amplifi.com/hc/en-us/articles/115000404608-How-to-Reset-your-Devices-to-Factory-Default-Settings", "source_name": "AmpliFi Help Center", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/amplifi-alien" }, { "slug": "amplifi-hd", "brand": "Ubiquiti", "model": "AmpliFi HD", "category": "mesh", "default_gateway_ip": null, "default_login_host": "amplifi.lan", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "app-only", "credential_note": "App-only in practice — no admin/admin default. You create the router password during first-time setup in the AmpliFi app. There is no password recovery; a forgotten password requires a factory reset.", "reset_steps": "AmpliFi HD is set up and managed in the AmpliFi mobile app (a limited web view exists at amplifi.lan, but there is no admin/admin default). To factory reset the router: use a straightened paperclip to press the reset button on the bottom for 5 seconds, or until the screen shows 'rebooting', then release. Reset any MeshPoints first (hold the reset hole on the side ~10 seconds). Re-run setup in the AmpliFi app and create a new admin/Wi-Fi password.", "source_url": "https://help.amplifi.com/hc/en-us/articles/115000404608-How-to-Reset-your-Devices-to-Factory-Default-Settings", "source_name": "AmpliFi Help Center", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/amplifi-hd" }, { "slug": "ubiquiti-edgerouter-12", "brand": "Ubiquiti", "model": "EdgeRouter 12", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": null, "default_username": "ubnt", "default_password": "ubnt", "default_password_blank": false, "credential_type": "static", "credential_note": "12-port Gigabit Ethernet router (2x SFP + 10x RJ45), rack-mountable 1U unit running EdgeOS — the highest-port-count model in the EdgeRouter line. Genuine static ubnt/ubnt confirmed in the official quick start guide.", "reset_steps": "Press and hold the Reset button for about 10 seconds until the front-panel LEDs flash in unison, then release; the router reboots to factory defaults. Connect to eth0, browse to https://192.168.1.1, and log in with ubnt/ubnt.", "source_url": "https://dl.ui.com/qsg/ER-12/ER-12_EN.html", "source_name": "Ubiquiti ER-12 (EdgeRouter 12) Quick Start Guide (official)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/ubiquiti-edgerouter-12" }, { "slug": "ubiquiti-edgerouter-4", "brand": "Ubiquiti", "model": "EdgeRouter 4 (ER-4)", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": null, "default_username": "ubnt", "default_password": "ubnt", "default_password_blank": false, "credential_type": "static", "credential_note": "4-port Gigabit Ethernet router plus one SFP port, EdgeOS on a 1 GHz dual-core CPU with hardware offload, no Wi-Fi. Genuine static ubnt/ubnt out of the box; eth0 is preset to a static 192.168.1.1.", "reset_steps": "With the router running, press and hold the recessed Reset button until the interface LEDs flash and the unit reboots to defaults. Connect to eth0, browse to https://192.168.1.1, enter ubnt/ubnt, and accept the licence agreement.", "source_url": "https://dl.ui.com/qsg/ER-4/ER-4_EN.html", "source_name": "Ubiquiti EdgeRouter ER-4 Quick Start Guide (official)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/ubiquiti-edgerouter-4" }, { "slug": "ubiquiti-edgerouter-6p", "brand": "Ubiquiti", "model": "EdgeRouter 6P (ER-6P)", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": null, "default_username": "ubnt", "default_password": "ubnt", "default_password_blank": false, "credential_type": "static", "credential_note": "6-port Gigabit router with 5x PoE-passthrough ports, desktop fanless unit running EdgeOS — built for powering downstream PoE APs/cameras straight from the router. Genuine static ubnt/ubnt confirmed in the official quick start guide.", "reset_steps": "Press and hold the Reset button for about 10 seconds until the front-panel LEDs flash in unison, then release; the router reboots to factory defaults. Connect to eth0, browse to https://192.168.1.1, and log in with ubnt/ubnt.", "source_url": "https://dl.ui.com/qsg/ER-6P/ER-6P_EN.html", "source_name": "Ubiquiti ER-6P (EdgeRouter 6P) Quick Start Guide (official)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/ubiquiti-edgerouter-6p" }, { "slug": "ubiquiti-edgerouter-lite-er-3", "brand": "Ubiquiti", "model": "EdgeRouter Lite (ER-3)", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": null, "default_username": "ubnt", "default_password": "ubnt", "default_password_blank": false, "credential_type": "static", "credential_note": "3-port Gigabit Ethernet router, fanless desktop unit with a dual-core MIPS64 CPU running EdgeOS, no Wi-Fi — the entry model in the EdgeRouter line below the ER-X. Genuine static ubnt/ubnt confirmed in the official quick start guide.", "reset_steps": "Press and hold the Reset button for about 10 seconds until the front-panel LEDs flash in unison, then release; the router reboots to factory defaults. Connect to eth0, browse to https://192.168.1.1, and log in with ubnt/ubnt.", "source_url": "https://dl.ui.com/qsg/ERLite-3/ERLite-3_EN.html", "source_name": "Ubiquiti ERLite-3 (EdgeRouter Lite) Quick Start Guide (official)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/ubiquiti-edgerouter-lite-er-3" }, { "slug": "ubiquiti-edgerouter-er-x", "brand": "Ubiquiti", "model": "EdgeRouter X (ER-X)", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": null, "default_username": "ubnt", "default_password": "ubnt", "default_password_blank": false, "credential_type": "static", "credential_note": "5-port Gigabit Ethernet router running EdgeOS, with passive-PoE passthrough, fanless, no Wi-Fi. Genuine static ubnt/ubnt out of the box (eth0 is preset to 192.168.1.1); EdgeOS does not force a password change in its first-login flow.", "reset_steps": "With the router fully booted, press and hold the Reset button for about 10 seconds until the eth4 LED flashes then goes solid; release and it auto-reboots to defaults. Connect to eth0, browse to https://192.168.1.1, enter ubnt/ubnt, and accept the licence agreement.", "source_url": "https://dl.ui.com/guides/edgemax/EdgeRouter_ER-X_QSG.pdf", "source_name": "Ubiquiti EdgeRouter ER-X Quick Start Guide (official)", "source_archive_url": "https://web.archive.org/web/20260729072335/https://dl.ui.com/guides/edgemax/EdgeRouter_ER-X_QSG.pdf", "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/ubiquiti-edgerouter-er-x" }, { "slug": "ubiquiti-udm", "brand": "Ubiquiti", "model": "UniFi Dream Machine (UDM)", "category": "gateway", "default_gateway_ip": "192.168.1.1", "default_login_host": "unifi.ui.com", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "Set-on-setup — the UDM has no admin/admin default. You create the administrator credentials (UI Account or local admin) in the setup wizard on first use. After adoption, device-level passwords are randomized by the controller.", "reset_steps": "There is no universal default password. To set up or recover: reset the UDM by holding the reset button on the bottom for about 10 seconds until the LED changes, releasing when it restarts. Then run the wizard — connect a computer or the UniFi Network mobile app to the same network and go to https://setup.ui.com (Chrome), or browse to the console at https://192.168.1.1, and create your admin login (a UI Account or a local admin) during setup.", "source_url": "https://dl.ui.com/qsg/udm/UDM_EN.html", "source_name": "Ubiquiti UDM Quick Start Guide", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/ubiquiti-udm" }, { "slug": "ubiquiti-udm-pro", "brand": "Ubiquiti", "model": "UniFi Dream Machine Pro (UDM-Pro)", "category": "gateway", "default_gateway_ip": "192.168.1.1", "default_login_host": "unifi.ui.com", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "Set-on-setup — there is no admin/admin default on the UDM-Pro. Administrator credentials are created during the first-run wizard; the local console requires the login you set, and adopted UniFi devices get randomized passwords.", "reset_steps": "No factory admin password exists. To set up or regain access: hold the reset button on the front until the device restarts to factory defaults, then launch Chrome and go to https://setup.ui.com (or connect the UniFi Network mobile app), on the same LAN as the UDM-Pro. Follow the Setup Wizard and create your own admin login (UI Account or local admin). Locally you can then reach the console at https://192.168.1.1.", "source_url": "https://dl.ui.com/qsg/UDM-Pro/UDM-Pro_EN.html", "source_name": "Ubiquiti UDM-Pro Quick Start Guide", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/ubiquiti-udm-pro" }, { "slug": "ubiquiti-udm-se", "brand": "Ubiquiti", "model": "UniFi Dream Machine SE (UDM-SE)", "category": "gateway", "default_gateway_ip": "192.168.1.1", "default_login_host": "unifi.ui.com", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "No default admin password. Setup forces you to create a local admin and/or sign in with a Ubiquiti account; those credentials are the only way in. SSH is disabled by default. There is no ubnt/ubnt web login on modern UniFi consoles.", "reset_steps": "Power on the UDM-SE and run the setup wizard from the UniFi mobile app (over Bluetooth/Wi-Fi) or from a browser at http://192.168.1.1 or unifi.ui.com. During setup you either sign in with a Ubiquiti (UI.com) account or create a local administrator username and password — that becomes your login. To factory reset, hold the recessed Reset button for about 10 seconds until the LED changes, then re-run the setup wizard.", "source_url": "https://help.ui.com/hc/en-us/articles/4416276882327-How-to-Set-Up-UniFi", "source_name": "Ubiquiti Help Center (How to Set Up UniFi)", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/ubiquiti-udm-se" }, { "slug": "ubiquiti-unifi-dream-router", "brand": "Ubiquiti", "model": "UniFi Dream Router (UDR)", "category": "gateway", "default_gateway_ip": "192.168.1.1", "default_login_host": "setup.ui.com", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "app-only", "credential_note": "No universal admin/password — a UI.com cloud account is created/used during UniFi OS setup (or set up via the UniFi app). Default gateway 192.168.1.1.", "reset_steps": "Hold the RESET button ~10 seconds until the LED changes to restore factory defaults.", "source_url": "https://help.ui.com/hc/en-us/articles/4416276882327-How-to-Set-Up-UniFi", "source_name": "Ubiquiti Help Center — How to Set Up UniFi", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/ubiquiti-unifi-dream-router" }, { "slug": "ubiquiti-unifi-u6-lite", "brand": "Ubiquiti", "model": "UniFi U6 Lite Access Point", "category": "router", "default_gateway_ip": null, "default_login_host": null, "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "app-only", "credential_note": "A UniFi access point is not logged into directly with a password. It is adopted into a UniFi controller/app, where you set the admin account. There is no per-AP admin/admin web login.", "reset_steps": "The U6 Lite has no standalone web admin — it is adopted and managed by a UniFi Network controller (a UniFi console like a Dream Machine, or the self-hosted UniFi Network application) using the UniFi app. Plug the AP in, open the UniFi app, and adopt it; your admin credentials live on the controller, not the AP. To factory reset, hold the recessed Reset button for about 10 seconds until the LED flashes, then re-adopt it.", "source_url": "https://help.ui.com/hc/en-us/articles/4416276882327-How-to-Set-Up-UniFi", "source_name": "Ubiquiti Help Center (How to Set Up UniFi)", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/ubiquiti-unifi-u6-lite" }, { "slug": "verizon-5g-internet-gateway-ask-ncq1338", "brand": "Verizon", "model": "5G Internet Gateway (ASK-NCQ1338)", "category": "gateway", "default_gateway_ip": "192.168.0.1", "default_login_host": null, "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "Askey-made 5G/LTE fixed-wireless home gateway for Verizon 5G Home Internet (LV55/LVSKIHP variants) — a fixed-wireless unit distinct from the Fios fibre routers G3100/CR1000A already covered. Password-only Web GUI login (no username), activated via the My Verizon app. Verizon: \"You can find the default password on the label under the 5G Internet Gateway.\"", "reset_steps": "Reset to factory defaults from the admin Web GUI, or use the security questions set during setup to revert the admin password. If forgotten, the label password under the unit is the factory default; default LAN IP is 192.168.0.1.", "source_url": "https://www.verizon.com/content/dam/support/pdf/user_guide/verizon-5g-internet-gateway-user-guide-rev.pdf", "source_name": "Verizon 5G Internet Gateway User Guide — official PDF", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/verizon-5g-internet-gateway-ask-ncq1338" }, { "slug": "verizon-fios-router-g3100", "brand": "Verizon", "model": "Fios Router G3100", "category": "gateway", "default_gateway_ip": "192.168.1.1", "default_login_host": "myfiosgateway.com", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "The G3100 uses username 'admin' plus a per-device Administrator Password printed on the rear label — there is no shared default password. The admin password on the label is separate from the WiFi password (also on the label).", "reset_steps": "Browse to http://myfiosgateway.com or http://192.168.1.1. Sign in with username 'admin' and the unique Administrator Password printed on the label on the back of the G3100. To factory reset, press and hold the recessed Reset button on the back ~15 seconds until the router restarts, then log in with the label's admin password.", "source_url": "https://www.verizon.com/support/residential/internet/equipment/routers/fios-router/", "source_name": "Verizon Internet Support — Fios Router", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/verizon-fios-router-g3100" }, { "slug": "verizon-internet-gateway-ask-ncm1100", "brand": "Verizon", "model": "Internet Gateway (ASK-NCM1100)", "category": "gateway", "default_gateway_ip": "192.168.1.1", "default_login_host": "mynetworksettings.com", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "Askey model NCM1100 LTE fixed-wireless home gateway (NCM1100E is the business variant) for Verizon LTE Home Internet — managed at mynetworksettings.com or 192.168.1.1, distinct from the 5G ASK-NCQ1338 gateway and the LTE Home Router in this run. Password-only login (no username). Verizon: \"enter the password that is printed next to the Password on the label on the back of the Gateway.\"", "reset_steps": "Use the reset button to restore factory defaults; the password printed next to 'Password' on the rear label is the factory default, and the factory Wi-Fi uses a unique WPA2 key on the rear sticker.", "source_url": "https://www.verizon.com/content/dam/support/pdf/user_guide/Verizon-Internet-Gateway-(ASK-NCM1100)-User-Manual-v1.pdf", "source_name": "Verizon Internet Gateway (ASK-NCM1100) User Manual v1 — official PDF", "source_archive_url": "https://web.archive.org/web/20260802221602/https://www.verizon.com/content/dam/support/pdf/user_guide/Verizon-Internet-Gateway-(ASK-NCM1100)-User-Manual-v1.pdf", "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/verizon-internet-gateway-ask-ncm1100" }, { "slug": "verizon-lte-home-router", "brand": "Verizon", "model": "LTE Home Router", "category": "gateway", "default_gateway_ip": "192.168.1.1", "default_login_host": null, "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "Dual-band Wi-Fi 5 (802.11ac) LTE fixed-wireless home router for Verizon LTE Home Internet, broadcasting LTE-Home-xxxx SSIDs (2.4G + 5G) — distinct from the 5G ASK-NCQ1338 gateway and the Fios routers already covered. Password-only login (no username). Verizon: \"Log in using the default password (Check your router's product label for your unique GUI Password).\"", "reset_steps": "Press and hold the reset button on the router to restore factory defaults; the unique GUI password on the product label is the factory default. Manage at http://192.168.1.1.", "source_url": "https://ss7.vzw.com/is/content/VerizonWireless/verizon-lte-home-router-v1-english-userguide", "source_name": "Verizon LTE Home Router User Guide — official PDF", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/verizon-lte-home-router" }, { "slug": "verizon-router-cr1000a", "brand": "Verizon", "model": "Verizon Router CR1000A", "category": "gateway", "default_gateway_ip": "192.168.1.1", "default_login_host": "myfiosgateway.com", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "Like the G3100, the CR1000A ships with username 'admin' and a unique Administrator Password on the rear label — no universal default. The admin password differs from the WiFi/network password shown on the same label.", "reset_steps": "Open a browser to http://myfiosgateway.com or http://192.168.1.1 and sign in with username 'admin' and the Administrator Password printed on the label on the back of the CR1000A. To factory reset, press and hold the recessed Reset button ~15 seconds until the router reboots, then log in with the label's admin password.", "source_url": "https://www.verizon.com/support/verizon-router-cr1000a/", "source_name": "Verizon Support — Verizon Router (CR1000A) Overview", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/verizon-router-cr1000a" }, { "slug": "vilo-mesh-wifi", "brand": "Vilo", "model": "Vilo Mesh Wi-Fi", "category": "mesh", "default_gateway_ip": null, "default_login_host": null, "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "app-only", "credential_note": "App-only — Vilo does not expose a web admin interface. There is no admin/admin default. The Wi-Fi name and password printed on the bottom label are only used to join the pod during app setup; you set your own network password in the app.", "reset_steps": "Vilo has no 192.168.x.x web login — configuration is done entirely in the Vilo mobile app. To factory reset: use a paperclip or pin to press and hold the reset button on the back of the Vilo for about 6 seconds until the light on the front flashes red. Then add the Vilo back in the app; the default network name and password used to join during setup are printed on the bottom of the pod.", "source_url": "https://support.viloliving.com/hc/en-us/articles/4411698214295-Vilo-Mesh-Wi-Fi-User-Manual", "source_name": "Vilo Living Support", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/vilo-mesh-wifi" }, { "slug": "virgin-media-hub-3", "brand": "Virgin Media", "model": "Hub 3", "category": "gateway", "default_gateway_ip": "192.168.0.1", "default_login_host": null, "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "No universal default. Each Hub 3 ships with a unique settings password printed on the base label (shown separately from the WiFi password). Logging in requires only that printed settings password.", "reset_steps": "To log in: connect to the hub, browse to 192.168.0.1 and enter the settings password. The settings password is printed on a sticker on the base of the hub, labelled 'Settings password' — this is not your WiFi password. To factory reset: with the hub switched on, use a pen to press and hold the recessed Reset button on the back/base for 10 seconds, then wait a few minutes for the white power light to become solidly lit; all settings revert to the values printed on the base.", "source_url": "https://www.virginmedia.com/help/broadband/reboot-or-reset-hub", "source_name": "Virgin Media Help — Reboot or reset your Hub", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/virgin-media-hub-3" }, { "slug": "virgin-media-hub-4", "brand": "Virgin Media", "model": "Hub 4", "category": "gateway", "default_gateway_ip": "192.168.0.1", "default_login_host": null, "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "No universal default. Each Hub 4 ships with a unique settings password on the base label, separate from the WiFi password. This is the whole login — there is no admin/admin.", "reset_steps": "To log in: connect to the hub, browse to 192.168.0.1 and enter the settings password printed on the base of the hub (labelled 'Settings password', different from the WiFi password). To factory reset: with the hub powered on, use a pen to press and hold the recessed Reset button on the back/base for 10 seconds, then wait a few minutes until the white front power light is solidly lit; all custom settings are wiped back to the base-label values.", "source_url": "https://www.virginmedia.com/help/broadband/reboot-or-reset-hub", "source_name": "Virgin Media Help — Reboot or reset your Hub", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/virgin-media-hub-4" }, { "slug": "virgin-media-hub-5", "brand": "Virgin Media", "model": "Hub 5", "category": "gateway", "default_gateway_ip": "192.168.0.1", "default_login_host": null, "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "No universal default. Each Hub 5 ships with a unique settings password printed on the base, distinct from the WiFi password. Aggregator 'admin/admin' listings are wrong for this device.", "reset_steps": "To log in: connect to the hub, browse to 192.168.0.1 and enter the settings password from the base label (labelled 'Settings password', not the WiFi password). To factory reset: with the hub on, use a pen to press and hold the recessed Reset button on the back/base for 10 seconds, then wait a few minutes for the white power light to become solid; all settings return to the base-label defaults.", "source_url": "https://www.virginmedia.com/help/broadband/reboot-or-reset-hub", "source_name": "Virgin Media Help — Reboot or reset your Hub", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/virgin-media-hub-5" }, { "slug": "vodafone-broadband-hub-thg3000", "brand": "Vodafone", "model": "Broadband Hub (THG3000)", "category": "gateway", "default_gateway_ip": "192.168.1.1", "default_login_host": null, "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "Recent Vodafone hubs (e.g. THG3000) do not use admin/admin — the admin password is a unique value printed on the base/back label, and you are forced to change it after first login.", "reset_steps": "To log in: connect to the hub, browse to 192.168.1.1, use username 'admin' and the unit-specific admin password printed on the sticker on the base/back of the hub. You are prompted to change it on first login. To factory reset: with the hub on, press and hold the recessed Reset pinhole on the back for about 10 seconds until it reboots; the admin password returns to the printed default.", "source_url": "https://www.vodafone.co.uk/support/articles/how-do-i-manage-my-vodafone-router-settings----e5749476-8ae0-4ce7-8d47-1813a037970f", "source_name": "Vodafone UK Support — How do I manage my Vodafone router settings?", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/vodafone-broadband-hub-thg3000" }, { "slug": "vodafone-station", "brand": "Vodafone", "model": "Vodafone Station", "category": "gateway", "default_gateway_ip": "192.168.0.1", "default_login_host": "192.168.0.1", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "DOCSIS cable gateway issued by Vodafone Germany for cable broadband plans. Admin UI at 192.168.0.1 with username admin; the password is device-unique, printed on the rear label and on the bundled WLAN card — not a shared static default, per Vodafone's own support page.", "reset_steps": "Insert a pointed object into the recessed RESET button and hold for at least 30 seconds; the Vodafone Station automatically performs a factory reset and restarts.", "source_url": "https://www.vodafone.de/hilfe/router/station.html", "source_name": "Vodafone Deutschland — Hilfe: Vodafone Station (official)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/vodafone-station" }, { "slug": "vodafone-power-station-it", "brand": "Vodafone Italy", "model": "Vodafone Power Station", "category": "gateway", "default_gateway_ip": "192.168.1.1", "default_login_host": "vodafone.station", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "FTTH/FTTC fibre gateway issued by Vodafone Italy. Both the router Username and Password (distinct from the Wi-Fi key) are printed on a per-unit label under the base — accessed at vodafone.station / 192.168.1.1. Vodafone Italia: \"il nome Utente e la Password Router che trovi sull'etichetta che trovi sotto la base della tua Vodafone Power Station.\"", "reset_steps": "Hold the reset button at least 5 seconds to restore factory settings; the router Username and Password are printed on the label under the base of the unit.", "source_url": "https://www.vodafone.it/privati/area-supporto/assistenza-dispositivi/vodafone-station/vodafone-power-station.html", "source_name": "Vodafone Italia — assistenza dispositivi (Vodafone Power Station)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/vodafone-power-station-it" }, { "slug": "vodafone-wifi-6-station-it", "brand": "Vodafone Italy", "model": "Vodafone Wi-Fi 6 Station", "category": "gateway", "default_gateway_ip": "192.168.1.1", "default_login_host": "vodafone.station", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "Wi-Fi 6 FTTH/FTTC fibre gateway issued by Vodafone Italy — the newer Wi-Fi 6 hardware, with its label on the side (vs under the base on the Power Station). Router Username and Password (distinct from the Wi-Fi key) are per-unit on that label. Vodafone Italia: \"il nome Utente e la Password Router che trovi sull'etichetta che trovi lateralmente sulla tua Vodafone WiFi 6 Station.\"", "reset_steps": "Restore factory settings via the reset button; the router Username and Password are printed on the label on the side of the unit.", "source_url": "https://www.vodafone.it/privati/area-supporto/assistenza-dispositivi/vodafone-station/vodafone-wifi-6-station.html", "source_name": "Vodafone Italia — assistenza dispositivi (Vodafone Wi-Fi 6 Station)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/vodafone-wifi-6-station-it" }, { "slug": "wavlink-wl-wn533a8", "brand": "Wavlink", "model": "WL-WN533A8 (AC1200)", "category": "router", "default_gateway_ip": "192.168.10.1", "default_login_host": "wavlogin.link", "default_username": null, "default_password": "admin", "default_password_blank": false, "credential_type": "static", "credential_note": "Wavlink's official docs state a genuine factory default: the web login password is 'admin' (password-only, no username) at 192.168.10.1 / wavlogin.link. This universal default is a real security risk - change it right after setup.", "reset_steps": "Reset: press and hold the RESET button with a pin for about 8-15 seconds until the device reboots, then release. Browse to http://192.168.10.1 or http://wavlogin.link, log in with the password admin, and change it immediately.", "source_url": "https://www.wavlink.com/en_us/faq/details/How-to-log-into-web-based-management-page-of-my-WAVLINK-router.html", "source_name": "Wavlink Official FAQ - How to log into the web-based management page of my WAVLINK router", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/wavlink-wl-wn533a8" }, { "slug": "xfinity-xfi-gateway-xb7", "brand": "Xfinity (Comcast)", "model": "xFi Gateway XB7 (CGM4331COM)", "category": "gateway", "default_gateway_ip": "10.0.0.1", "default_login_host": "10.0.0.1", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "There is no universal admin/password on current XB7 firmware. Username is 'admin' but the default password is the unique code printed on the device label, and newer builds also require you to switch on Admin Tool access from the Xfinity app before 10.0.0.1 will load.", "reset_steps": "Log in to the Admin Tool by opening a browser to http://10.0.0.1 and signing in with username 'admin'. On XB7 firmware you may first need to enable web access: open the Xfinity app > WiFi > View WiFi equipment > Advanced Settings > Admin Tool online access > turn ON. The initial Admin Tool password is the unique value printed on the sticker on the side/bottom of the gateway (it is NOT 'password' on current firmware). To factory reset, press and hold the recessed Reset pinhole on the back for ~30 seconds until the gateway reboots, then log in with the sticker credentials.", "source_url": "https://www.xfinity.com/support/articles/wifi-change-admin-tool", "source_name": "Xfinity Support — Change your WiFi with the Gateway Admin Tool", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/xfinity-xfi-gateway-xb7" }, { "slug": "xfinity-xfi-gateway-xb8", "brand": "Xfinity (Comcast)", "model": "xFi Gateway XB8 (CGM4981COM)", "category": "gateway", "default_gateway_ip": "10.0.0.1", "default_login_host": "10.0.0.1", "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "No admin/admin or admin/password default on the XB8. The label carries a unique admin password, and web admin access often has to be toggled on from the Xfinity app first because WiFi Intelligence locks the local tool.", "reset_steps": "Browse to http://10.0.0.1 and sign in with username 'admin'. If the page won't load, enable it first in the Xfinity app: WiFi > View WiFi equipment > Advanced Settings > Admin Tool online access > ON. The default Admin Tool password is the unique string on the label on the bottom of the XB8 (not 'password'). Factory reset: hold the recessed Reset pinhole on the rear ~30 seconds until it reboots; log back in with the label credentials.", "source_url": "https://www.xfinity.com/support/articles/wifi-change-admin-tool", "source_name": "Xfinity Support — Change your WiFi with the Gateway Admin Tool", "source_archive_url": "https://web.archive.org/web/20260729070000/https://www.xfinity.com/support/articles/wifi-change-admin-tool", "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/xfinity-xfi-gateway-xb8" }, { "slug": "xiaomi-mi-router-4a-gigabit", "brand": "Xiaomi", "model": "Mi Router 4A Gigabit Edition", "category": "router", "default_gateway_ip": "192.168.31.1", "default_login_host": "router.miwifi.com", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "The Mi Router 4A Gigabit Edition answers on 192.168.31.1 and has no shared default. Whoever runs initial setup — through router.miwifi.com, the Mi Home app, or the older Mi WiFi app — creates the management password, and there is no username to go with it.", "reset_steps": "With the router on, hold the Reset button on the bottom until the indicator light changes/blinks (~5–10 seconds) to restore factory settings.", "source_url": "https://www.mi.com/uk/support/user-guide-pdf/mi-router-4a-gigabit-edition/", "source_name": "Xiaomi Mi Router 4A Gigabit Edition official User Guide", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/xiaomi-mi-router-4a-gigabit" }, { "slug": "xiaomi-router-ax3000t", "brand": "Xiaomi", "model": "Router AX3000T", "category": "router", "default_gateway_ip": "192.168.31.1", "default_login_host": "router.miwifi.com", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "AX3000T is Xiaomi's AX3000 WiFi 6 router. It carries no universal password: the management password is one you choose the first time you set the unit up, either at router.miwifi.com or from the Mi Home app.", "reset_steps": "Hold the Reset button underneath the powered router until the indicator light changes or blinks — roughly 5-10 seconds — to return it to factory settings.", "source_url": "https://www.mi.com/global/support/faq/details/KA-235692/", "source_name": "Xiaomi Router AX3000T official FAQ (mi.com)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/xiaomi-router-ax3000t" }, { "slug": "ziply-fiber-arris-nvg448bq", "brand": "Ziply Fiber", "model": "Arris NVG448BQ Fiber Gateway", "category": "gateway", "default_gateway_ip": "192.168.254.254", "default_login_host": null, "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "Ziply Fiber's Arris/CommScope NVG448BQ fibre gateway (Wi-Fi 6, XGS-PON FTTH, multi-gig). The web admin at 192.168.254.254 is protected by a per-device 10-digit Device Access Code on the bottom bar-code label — not a shared admin/admin default; login is code-only with no username.", "reset_steps": "Enter 192.168.254.254 in a browser and log in with the 10-digit Device Access Code printed on the bar-code sticker on the bottom of the router. To reset, hold the router's reset button to restore the factory settings (SSID/password/access code) shown on the sticker.", "source_url": "https://ziplyfiber.com/helpcenter/categories/internet/installation-setup/change-wifi-name-and-password", "source_name": "Ziply Fiber Help Center — Change the name and password of your home network (official)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/ziply-fiber-arris-nvg448bq" }, { "slug": "zyxel-armor-g5", "brand": "Zyxel", "model": "Armor G5 (NBG7815)", "category": "router", "default_gateway_ip": "192.168.123.1", "default_login_host": "zyxelwifi.com", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "No password required for the first login; you set the admin password during initial setup. No default username.", "reset_steps": "Hold the Reset button ~5–10 seconds until the LED responds to restore factory defaults.", "source_url": "https://download.zyxel.com/Armor_G5_(NBG7815)/user_guide/Armor%20G5%20(NBG7815)_V1.00_Ed5.pdf", "source_name": "Zyxel Armor G5 (NBG7815) official User's Guide", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/zyxel-armor-g5" }, { "slug": "zyxel-multy-m1", "brand": "Zyxel", "model": "Multy M1 (WSM20)", "category": "mesh", "default_gateway_ip": "192.168.212.1", "default_login_host": "192.168.212.1", "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "set-on-setup", "credential_note": "AX1800 mesh managed via the Zyxel Multy app. There is no static admin default: the web GUI at 192.168.212.1 uses either a myZyxelCloud account or a local password you create during app registration. The label SSID/key is for Wi-Fi, not admin.", "reset_steps": "Hold the RESET button on the Multy unit about 5 seconds until the LED changes, then reconfigure through the Zyxel Multy app.", "source_url": "https://www.zyxel.com/web-help-app/MultyWiFiSeries/MultyApp2.6.0/h_Trouble_Access_Login.html", "source_name": "Zyxel official Multy WiFi online help", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/zyxel-multy-m1" }, { "slug": "zyxel-multy-x-wsq50", "brand": "Zyxel", "model": "Multy X (WSQ50)", "category": "mesh", "default_gateway_ip": null, "default_login_host": null, "default_username": null, "default_password": null, "default_password_blank": false, "credential_type": "app-only", "credential_note": "App-only. The Multy X is set up and administered through the Zyxel Multy mobile app; there is no admin/admin web default. Your credentials are the Wi-Fi password you set in the app and, optionally, a myZyxelCloud account.", "reset_steps": "The Multy X is managed with the Zyxel Multy app (optionally signed into a myZyxelCloud account) — there is no traditional web login. To factory reset a unit: use a paperclip or toothpick to press and hold the reset button in the small hole next to the power jack for about 5 seconds; the LED starts fast-blinking red to show it is resetting. Then re-add the unit in the Zyxel Multy app and set your Wi-Fi name and password.", "source_url": "https://download.zyxel.com/Multy_X_(WSQ50)/user_guide/Multy%20X%20(WSQ50)_V2.0.0%20ed2.pdf", "source_name": "Zyxel Multy X User's Guide", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/zyxel-multy-x-wsq50" }, { "slug": "zyxel-nbg7510", "brand": "Zyxel", "model": "NBG7510 (AX1800)", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": null, "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "Per the official user's guide you sign in with username admin and a randomly-assigned default password printed on the device label — unique per unit, not a shared default — and are prompted to change it at first login.", "reset_steps": "With the device on, insert a thin pin into the RESET hole and hold until it reboots to reload the factory-default configuration, then log in with the label password.", "source_url": "https://download.zyxel.com/NBG7510/user_guide/NBG7510_V1.00_Ed6.pdf", "source_name": "Zyxel official NBG7510 User's Guide (V1.00 Ed6)", "source_archive_url": "https://web.archive.org/web/20240612105055/https://download.zyxel.com/NBG7510/user_guide/NBG7510_V1.00_Ed6.pdf", "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/zyxel-nbg7510" }, { "slug": "zyxel-nwa110ax", "brand": "Zyxel", "model": "NWA110AX", "category": "ap", "default_gateway_ip": "192.168.1.2", "default_login_host": null, "default_username": "admin", "default_password": "1234", "default_password_blank": false, "credential_type": "static", "credential_note": "Business Wi-Fi 6 (802.11ax) AX1800 dual-radio 2x2 PoE access point in the NebulaFlex line — runs standalone or under Nebula cloud (NCC). Genuine documented static default admin/1234 for the local Web Configurator at 192.168.1.2. When adopted by Nebula the credential is set in NCC instead.", "reset_steps": "Ceiling/wall-mount AP powered by 802.3af/at PoE. Restore factory defaults (reset button or Web Configurator), then browse to the DHCP-assigned IP or http://192.168.1.2 and sign in with admin / 1234; the Update Admin Info screen then forces a new password.", "source_url": "https://download.zyxel.com/NWA110AX/user_guide/NWA110AX_V6.60_Ed1.pdf", "source_name": "Zyxel NWA110AX User's Guide (V6.60) — download.zyxel.com (official)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/zyxel-nwa110ax" }, { "slug": "zyxel-nwa210ax", "brand": "Zyxel", "model": "NWA210AX", "category": "ap", "default_gateway_ip": "192.168.1.2", "default_login_host": null, "default_username": "admin", "default_password": "1234", "default_password_blank": false, "credential_type": "static", "credential_note": "Business Wi-Fi 6 AX3000 access point with a 4x4:4 (5GHz) plus 2x2:2 (2.4GHz) radio design and 802.3at PoE+ input, part of the NebulaFlex family (standalone or Nebula cloud). Documented static default admin/1234 on the local Web Configurator; when the AP is Nebula-managed (NCC) the login lives in the cloud account.", "reset_steps": "Higher-tier PoE+ AP for dense deployments. After a factory reset, reach it at its DHCP-assigned address or http://192.168.1.2 and log in with admin / 1234; the wizard then prompts for a new admin password.", "source_url": "https://download.zyxel.com/NWA210AX/user_guide/NWA210AX_V6.55_Ed1.pdf", "source_name": "Zyxel NWA210AX User's Guide (V6.55) — download.zyxel.com (official)", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/zyxel-nwa210ax" }, { "slug": "zyxel-nwa50ax", "brand": "Zyxel", "model": "NWA50AX", "category": "router", "default_gateway_ip": "192.168.1.1", "default_login_host": null, "default_username": "admin", "default_password": null, "default_password_blank": false, "credential_type": "label-unique", "credential_note": "Username is admin, but the password is the unique value printed on the device label — not a shared default. Zyxel access points made before Feb 2025 used a static '1234'; newer models ship with the per-device label password and no universal default.", "reset_steps": "Connect to the AP and browse to http://192.168.1.1 (or the IP it received from your router). Log in with username 'admin' and the randomly assigned password printed on the device label. If the unit is older (manufactured before Feb 2025), the default password is '1234'. To factory reset, hold the Reset button for about 10 seconds until the LEDs blink and the AP reboots, then log in with the label password (or 1234 on older units).", "source_url": "https://support.zyxel.eu/hc/en-us/articles/24166738506898-Zyxel-WLAN-AP-default-password-on-Zyxel-access-points", "source_name": "Zyxel Support Campus EMEA (default password on Zyxel access points)", "source_archive_url": null, "confidence": "medium", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/zyxel-nwa50ax" }, { "slug": "zyxel-nwa90ax", "brand": "Zyxel", "model": "NWA90AX", "category": "ap", "default_gateway_ip": "192.168.1.2", "default_login_host": null, "default_username": "admin", "default_password": "1234", "default_password_blank": false, "credential_type": "static", "credential_note": "802.11ax dual-radio PoE unified access point in the NWA50/90/55 series — a distinct model from the already-covered NWA110AX/NWA210AX. Official user guide: 'Enter the user name (default: \"admin\") and password (default: \"1234\")' — same static-default precedent as its NebulaFlex siblings.", "reset_steps": "Press the RESET button for more than 5 seconds to return to factory defaults, then browse to http://192.168.1.2 and log in with admin/1234 — the Update Admin Info screen then forces a new password.", "source_url": "https://download.zyxel.com/NWA90AX/user_guide/NWA90AX_V6.29_Ed2.pdf", "source_name": "Zyxel NWA50/90/55 Series User's Guide V6.29 Ed2 — download.zyxel.com (official)", "source_archive_url": "https://web.archive.org/web/20240812120745/https://download.zyxel.com/NWA90AX/user_guide/NWA90AX_V6.29_Ed2.pdf", "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/zyxel-nwa90ax" }, { "slug": "zyxel-usg-flex-50h", "brand": "Zyxel", "model": "USG FLEX 50H", "category": "gateway", "default_gateway_ip": "192.168.168.1", "default_login_host": null, "default_username": "admin", "default_password": "1234", "default_password_blank": false, "credential_type": "static", "credential_note": "Compact UOS-based security gateway/firewall (USG FLEX H series) — Zyxel's newest gateway line, distinct from the older ZyWALL-based USG FLEX and from the NWA-series access points already covered. Official user guide cover page: 'Login IP Address https://192.168.168.1 / User Name admin / Password See Zyxel Device label or 1234.'", "reset_steps": "Press the RESET button for more than 5 seconds to restore factory defaults, then browse to https://192.168.168.1 and log in with admin/1234 (or the password on the device label, if present); a new password is forced immediately after.", "source_url": "https://download.zyxel.com/USG_FLEX_50H/user_guide/USG%20FLEX%2050H_V1.30_Ed1.pdf", "source_name": "Zyxel USG FLEX H Series User's Guide V1.30 Ed1 — download.zyxel.com (official)", "source_archive_url": "https://web.archive.org/web/20260727184819/https://download.zyxel.com/USG_FLEX_50H/user_guide/USG%20FLEX%2050H_V1.30_Ed1.pdf", "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/zyxel-usg-flex-50h" }, { "slug": "zyxel-wax610d", "brand": "Zyxel", "model": "WAX610D", "category": "ap", "default_gateway_ip": "192.168.1.2", "default_login_host": "1.1.1.1", "default_username": "admin", "default_password": "1234", "default_password_blank": false, "credential_type": "static", "credential_note": "NebulaFlex PRO dual-radio 802.11ax (Wi-Fi 6) unified access point (4x4-class 5 GHz); standalone, Nebula (NCC), or AC managed. In standalone mode it ships the genuine static default admin / 1234. Zyxel: \"Enter the user name (default: 'admin') and password (default: '1234').\"", "reset_steps": "Hold the physical Reset button to restore factory defaults. In standalone mode, browse to http://1.1.1.1 (initial setup) or the device IP http://192.168.1.2 and log in with admin / 1234; the Update Admin Info screen then prompts a password change.", "source_url": "https://download.zyxel.com/WAX610D/user_guide/WAX610D_V6.70_Ed1.pdf", "source_name": "Zyxel WAX610D User's Guide V6.70 — official PDF", "source_archive_url": null, "confidence": "high", "last_verified": "2026-08-10", "ssid_url": "https://ssid.ai/routers/zyxel-wax610d" } ] }