# **********************************************************
# Copyright (c) 2015-2025 Google, Inc.    All rights reserved.
# **********************************************************

# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
#
# * Redistributions of source code must retain the above copyright notice,
#   this list of conditions and the following disclaimer.
#
# * Redistributions in binary form must reproduce the above copyright notice,
#   this list of conditions and the following disclaimer in the documentation
#   and/or other materials provided with the distribution.
#
# * Neither the name of Google, Inc. nor the names of its contributors may be
#   used to endorse or promote products derived from this software without
#   specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED. IN NO EVENT SHALL VMWARE, INC. OR CONTRIBUTORS BE LIABLE
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
# CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
# DAMAGE.

cmake_minimum_required(VERSION 3.14)

include(../../make/policies.cmake NO_POLICY_SCOPE)

# We set a time limit on our unit tests here which do not go through suite/.
set(test_seconds 90)

if (WIN32)
  set(os_name "win")
  # Our non-client files assume this is set, yet don't include headers that set it.
  add_definitions(-DWINDOWS)
else ()
  set(os_name "unix")
  # Ditto.
  add_definitions(-DUNIX)
  if (LINUX)
    add_definitions(-DLINUX)
  elseif (APPLE)
    add_definitions(-DMACOS)
  endif ()
endif ()
# Ditto here, in particular for options.cpp.
if (X86)
  if (X64)
    add_definitions(-DX86_64)
  else ()
    add_definitions(-DX86_32)
  endif ()
elseif (AARCHXX)
  if (X64)
    add_definitions(-DARM_64)
  else ()
    add_definitions(-DARM_32)
  endif ()
elseif (RISCV64)
    add_definitions(-DRISCV_64)
endif ()

# GCC 6+ has a warning for an ABI change due to a bug introduced in GCC 5:
# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=77728. As we are building all of
# drcachesim and not linking to other C++ code, we can just ignore it.
if (ARM AND CMAKE_COMPILER_IS_GNUCC)
  include(CheckCXXCompilerFlag)
  CHECK_CXX_COMPILER_FLAG(-Wno-psabi GCC_HAS_NO_PSABI)
  if (GCC_HAS_NO_PSABI)
    set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wno-psabi")
  endif (GCC_HAS_NO_PSABI)
endif ()

# i#2277: we use zlib if available to write and read compressed trace files,
# and now to write zipfiles for fast seeking.
if (ZLIB_FOUND)
  add_definitions(-DHAS_ZLIB)
  include_directories(${ZLIB_INCLUDE_DIRS})
  set(zlib_reader reader/compressed_file_reader.cpp)

  # We use minizip, supplied with zlib, to split offline traces into pieces
  # inside zipfiles to support fast seeking.
  set(minizip_dir "${PROJECT_SOURCE_DIR}/third_party/zlib/contrib/minizip")
  if (NOT EXISTS "${minizip_dir}")
    # XXX: Should we make this a fatal error, and build zlib on Windows,
    # to eliminate having to support both .gz and .zip output?
    # Maybe require zlib as well and stop supporting uncompressed output
    # and remove HAS_ZLIB ifdefs from our code?
    message(WARNING
      "third_party/zlib submodule is not initialized: run 'git submodule init'; "
      "until then, disabling zip output and fast seeking")
    set(zip_reader "")
    set(zlib_libs ${ZLIB_LIBRARIES})
    set(zlib_static_libs ${ZLIB_STATIC_LIBRARIES})
    set(ZIP_FOUND OFF)
  else ()
    file(GLOB minizip_srcs "${minizip_dir}/*.c")
    if (NOT WIN32)
      list(REMOVE_ITEM minizip_srcs "${minizip_dir}/iowin32.c")
    endif ()
    add_library(minizip STATIC ${minizip_srcs})
    if (APPLE)
      append_property_string(TARGET minizip
        COMPILE_FLAGS "-mmacosx-version-min=${OLDEST_OSX_SUPPPORTED}")
    endif ()
    add_definitions(-DHAS_ZIP)
    set(ZIP_FOUND ON)
    # We add "minizip/" to avoid collisions with system "zip.h" on Mac.
    include_directories(${minizip_dir}/..)
    DR_export_target(minizip)
    install_exported_target(minizip ${INSTALL_CLIENTS_LIB})
    set(zip_reader reader/zipfile_file_reader.cpp)
    set(zlib_libs ${ZLIB_LIBRARIES} minizip)
    set(zlib_static_libs ${ZLIB_STATIC_LIBRARIES} minizip)
  endif ()
else ()
  # XXX: We could ship with a zlib for Windows, or build the third_party/zlib.
  # Today we simply don't support compressed traces or fast seeking on Windows.
  set(zlib_reader "")
  set(zip_reader "")
  set(zlib_libs "")
endif()

if (libsnappy)
  add_definitions(-DHAS_SNAPPY)
  set(snappy_reader
    reader/snappy_file_reader.cpp
    common/snappy_consts.cpp
    common/crc32c.cpp
    )
else ()
  set(snappy_reader "")
endif()

if (liblz4)
  add_definitions(-DHAS_LZ4)
  set(lz4_reader reader/lz4_file_reader.cpp)
endif ()

set(client_and_sim_srcs
  common/named_pipe_${os_name}.cpp
  common/options.cpp
  common/trace_entry.cpp)

# i#2006: we split our tools into libraries for combining as desired in separate
# launchers.  Since they are exported in the same dir as other tools like drcov,
# we use a drmemtrace_ prefix.
macro (add_exported_library name type)
  add_library(${name} ${type} ${ARGN})
  DR_export_target(${name})
  install_exported_target(${name} ${INSTALL_CLIENTS_LIB})
  add_dependencies(${name} api_headers)
endmacro ()

add_exported_library(drmemtrace_reuse_distance STATIC tools/reuse_distance.cpp)
add_exported_library(drmemtrace_histogram STATIC tools/histogram.cpp)
add_exported_library(drmemtrace_reuse_time STATIC tools/reuse_time.cpp)
add_exported_library(drmemtrace_basic_counts STATIC tools/basic_counts.cpp)
add_exported_library(drmemtrace_opcode_mix STATIC tools/opcode_mix.cpp)
add_exported_library(drmemtrace_syscall_mix STATIC tools/syscall_mix.cpp)
add_exported_library(drmemtrace_view STATIC
                     tools/view.cpp tracer/raw2trace_shared.cpp)
add_exported_library(drmemtrace_func_view STATIC tools/func_view.cpp)
add_exported_library(drmemtrace_invariant_checker STATIC tools/invariant_checker.cpp)
add_exported_library(drmemtrace_schedule_stats STATIC tools/schedule_stats.cpp)
add_exported_library(drmemtrace_decode_cache STATIC
                     tools/common/decode_cache.cpp
                     # XXX: Possibly create a library for raw2trace_shared, to avoid
                     # multiple build overhead.
                     tracer/raw2trace_shared.cpp)
add_exported_library(drmemtrace_schedule_file STATIC common/schedule_file.cpp)
add_exported_library(drmemtrace_mutex_dbg_owned STATIC common/mutex_dbg_owned.cpp)

target_link_libraries(drmemtrace_invariant_checker drdecode drmemtrace_schedule_file
                      drmemtrace_decode_cache)
target_link_libraries(drmemtrace_decode_cache drcovlib_static)
target_link_libraries(drmemtrace_opcode_mix drmemtrace_decode_cache)
target_link_libraries(drmemtrace_view drmemtrace_decode_cache)

configure_DynamoRIO_standalone(drmemtrace_decode_cache)
configure_DynamoRIO_standalone(drmemtrace_opcode_mix)
configure_DynamoRIO_standalone(drmemtrace_view)
configure_DynamoRIO_standalone(drmemtrace_invariant_checker)

# We combine the cache and TLB simulators as they share code already.
add_exported_library(drmemtrace_simulator STATIC
  simulator/simulator.cpp
  simulator/cache.cpp
  simulator/cache_miss_analyzer.cpp
  simulator/caching_device.cpp
  simulator/caching_device_stats.cpp
  simulator/cache_stats.cpp
  simulator/prefetcher.cpp
  simulator/cache_simulator.cpp
  simulator/snoop_filter.cpp
  simulator/tlb.cpp
  simulator/tlb_simulator.cpp
  simulator/create_cache_replacement_policy.cpp
  simulator/policy_bit_plru.cpp
  simulator/policy_fifo.cpp
  simulator/policy_lfu.cpp
  simulator/policy_lru.cpp
  simulator/policy_rrip.cpp
  )

add_exported_library(drmemtrace_record_filter STATIC
  tools/filter/record_filter.h
  tools/filter/record_filter.cpp
  tools/filter/cache_filter.h
  tools/filter/cache_filter.cpp
  tools/filter/type_filter.h
  tools/filter/encodings2regdeps_filter.h
  tools/filter/func_id_filter.h
  tools/filter/modify_marker_value_filter.h
  tools/filter/null_filter.h)
target_link_libraries(drmemtrace_record_filter drmemtrace_simulator
  drmemtrace_schedule_file)
configure_DynamoRIO_standalone(drmemtrace_record_filter)

add_exported_library(directory_iterator STATIC common/directory_iterator.cpp)
add_dependencies(directory_iterator api_headers)
target_link_libraries(directory_iterator drfrontendlib)

if (BUILD_PT_POST_PROCESSOR)
  add_subdirectory(drpt2trace)
endif (BUILD_PT_POST_PROCESSOR)

set(raw2trace_srcs
  tracer/raw2trace.cpp
  tracer/raw2trace_shared.cpp
  tracer/raw2trace_directory.cpp
  tracer/instru.cpp
  tracer/instru_online.cpp
  tracer/instru_offline.cpp
  reader/reader.cpp
  reader/reader_base.cpp
  common/trace_entry.cpp
  reader/record_file_reader.cpp
  ${zlib_reader}
  )
if (libsnappy)
  set(raw2trace_srcs ${raw2trace_srcs}
    ${snappy_reader}
    reader/file_reader.cpp
    )
endif ()
add_exported_library(drmemtrace_raw2trace STATIC ${raw2trace_srcs})
configure_DynamoRIO_standalone(drmemtrace_raw2trace)
target_link_libraries(drmemtrace_raw2trace directory_iterator drfrontendlib
  drmemtrace_schedule_file)
use_DynamoRIO_extension(drmemtrace_raw2trace drutil_static)
link_with_pthread(drmemtrace_raw2trace)
if (libsnappy)
  target_link_libraries(drmemtrace_raw2trace snappy)
endif ()
if (liblz4)
  target_link_libraries(drmemtrace_raw2trace lz4)
endif ()

if (BUILD_PT_POST_PROCESSOR)
  add_definitions(-DBUILD_PT_POST_PROCESSOR)
  target_link_libraries(drmemtrace_raw2trace drpt2ir drir2trace)
endif (BUILD_PT_POST_PROCESSOR)

set(loader_srcs
  tools/loader/dynamic_lib.cpp
  tools/loader/external_tool_creator.cpp
  tools/loader/external_config_file.cpp)

# XXX: We should link in drmemtrace_analyzer instead of re-building its
# source files.
set(drcachesim_srcs
  launcher.cpp
  scheduler/scheduler.cpp
  scheduler/scheduler_impl.cpp
  scheduler/scheduler_dynamic.cpp
  scheduler/scheduler_replay.cpp
  scheduler/scheduler_fixed.cpp
  scheduler/speculator.cpp
  scheduler/noise_generator.cpp
  analyzer.cpp
  analyzer_multi.cpp
  ${client_and_sim_srcs}
  reader/reader.cpp
  reader/reader_base.cpp
  reader/config_reader.cpp
  reader/v2p_reader.cpp
  reader/file_reader.cpp
  reader/record_file_reader.cpp
  ${zlib_reader}
  ${zip_reader}
  ${snappy_reader}
  ${lz4_reader}
  reader/ipc_reader.cpp
  tracer/instru.cpp
  tracer/instru_online.cpp
  ${loader_srcs})

add_executable(drmemtrace_launcher ${drcachesim_srcs})
# In order to embed raw2trace we need to be standalone:
configure_DynamoRIO_standalone(drmemtrace_launcher)
# Link in our tools:
target_link_libraries(drmemtrace_launcher drmemtrace_simulator drmemtrace_reuse_distance
  drmemtrace_histogram drmemtrace_reuse_time drmemtrace_basic_counts
  drmemtrace_opcode_mix drmemtrace_syscall_mix drmemtrace_view drmemtrace_func_view
  drmemtrace_raw2trace directory_iterator drmemtrace_invariant_checker
  drmemtrace_schedule_stats drmemtrace_record_filter drmemtrace_mutex_dbg_owned)
if (UNIX)
    target_link_libraries(drmemtrace_launcher dl)
endif ()
if (libsnappy)
  target_link_libraries(drmemtrace_launcher snappy)
endif ()
# To avoid dup symbol errors between drinjectlib and drdecode on Windows we have
# to explicitly list drdecode up front:
target_link_libraries(drmemtrace_launcher drdecode drinjectlib drconfiglib drfrontendlib)
use_DynamoRIO_extension(drmemtrace_launcher droption)
# These are also for raw2trace:
use_DynamoRIO_extension(drmemtrace_launcher drcovlib_static)
use_DynamoRIO_extension(drmemtrace_launcher drutil_static)

# This is to avoid ../ and common/ in the #includes of headers that we
# export in a single dir for 3rd-party tool integration.
include_directories(${CMAKE_CURRENT_SOURCE_DIR}/simulator)
include_directories(${CMAKE_CURRENT_SOURCE_DIR}/common)
include_directories(${CMAKE_CURRENT_SOURCE_DIR}/reader)
# TODO i#6412: raw2trace.h and related headers that are used only in raw2trace
# conversion are also a part of this directory. Ideally we'd like for tracer
# code to not be able to include those headers so that we can keep tracer
# separate from raw2trace. Create a separate directory for non-tracer headers
# so that we can more cleanly separate tracer and raw2trace code.
include_directories(${CMAKE_CURRENT_SOURCE_DIR}/tracer)
include_directories(${CMAKE_CURRENT_SOURCE_DIR}/scheduler)
include_directories(${CMAKE_CURRENT_SOURCE_DIR}/tools/common)
include_directories(${CMAKE_CURRENT_SOURCE_DIR})

if (BUILD_PT_POST_PROCESSOR)
  include_directories(${CMAKE_CURRENT_SOURCE_DIR}/drpt2trace)
endif (BUILD_PT_POST_PROCESSOR)

add_exported_library(drmemtrace_analyzer STATIC
  analyzer.cpp
  scheduler/scheduler.cpp
  scheduler/scheduler_impl.cpp
  scheduler/scheduler_dynamic.cpp
  scheduler/scheduler_replay.cpp
  scheduler/scheduler_fixed.cpp
  scheduler/speculator.cpp
  scheduler/noise_generator.cpp
  common/trace_entry.cpp
  reader/reader.cpp
  reader/reader_base.cpp
  reader/config_reader.cpp
  reader/v2p_reader.cpp
  reader/file_reader.cpp
  reader/record_file_reader.cpp
  ${zlib_reader}
  ${zip_reader}
  ${snappy_reader}
  ${lz4_reader}
  )
target_link_libraries(drmemtrace_analyzer directory_iterator drmemtrace_mutex_dbg_owned)
if (libsnappy)
  target_link_libraries(drmemtrace_analyzer snappy)
endif ()
if (liblz4)
  target_link_libraries(drmemtrace_analyzer lz4)
endif ()

link_with_pthread(drmemtrace_analyzer)
# We get away w/ exporting the generically-named "utils.h" by putting into a
# drmemtrace/ subdir.
install_client_nonDR_header(drmemtrace common/utils.h)
install_client_nonDR_header(drmemtrace common/trace_entry.h)
install_client_nonDR_header(drmemtrace common/memref.h)
install_client_nonDR_header(drmemtrace common/memtrace_stream.h)
install_client_nonDR_header(drmemtrace common/archive_istream.h)
install_client_nonDR_header(drmemtrace common/archive_ostream.h)
install_client_nonDR_header(drmemtrace common/mutex_dbg_owned.h)
install_client_nonDR_header(drmemtrace reader/reader.h)
install_client_nonDR_header(drmemtrace reader/file_reader.h)
install_client_nonDR_header(drmemtrace reader/reader_base.h)
install_client_nonDR_header(drmemtrace reader/record_file_reader.h)
install_client_nonDR_header(drmemtrace analysis_tool.h)
install_client_nonDR_header(drmemtrace analyzer.h)
install_client_nonDR_header(drmemtrace tools/common/decode_cache.h)
install_client_nonDR_header(drmemtrace tools/reuse_distance_create.h)
install_client_nonDR_header(drmemtrace tools/histogram_create.h)
install_client_nonDR_header(drmemtrace tools/reuse_time_create.h)
install_client_nonDR_header(drmemtrace tools/basic_counts_create.h)
install_client_nonDR_header(drmemtrace tools/opcode_mix_create.h)
install_client_nonDR_header(drmemtrace tools/schedule_stats_create.h)
install_client_nonDR_header(drmemtrace tools/syscall_mix_create.h)
install_client_nonDR_header(drmemtrace simulator/cache_replacement_policy.h)
install_client_nonDR_header(drmemtrace simulator/cache_simulator.h)
install_client_nonDR_header(drmemtrace simulator/cache_simulator_create.h)
install_client_nonDR_header(drmemtrace simulator/caching_device_stats.h)
install_client_nonDR_header(drmemtrace simulator/policy_rrip.h)
install_client_nonDR_header(drmemtrace simulator/policy_lru.h)
install_client_nonDR_header(drmemtrace simulator/policy_fifo.h)
install_client_nonDR_header(drmemtrace simulator/policy_bit_plru.h)
install_client_nonDR_header(drmemtrace simulator/tlb_simulator_create.h)
install_client_nonDR_header(drmemtrace tools/view_create.h)
install_client_nonDR_header(drmemtrace tools/func_view_create.h)
install_client_nonDR_header(drmemtrace tools/filter/record_filter_create.h)
install_client_nonDR_header(drmemtrace tools/filter/record_filter.h)
# TODO i#6412: Create a separate directory for non-tracer headers so that
# we can more cleanly separate tracer and raw2trace code.
install_client_nonDR_header(drmemtrace tracer/raw2trace.h)
install_client_nonDR_header(drmemtrace tracer/raw2trace_shared.h)
install_client_nonDR_header(drmemtrace scheduler/scheduler.h)
install_client_nonDR_header(drmemtrace scheduler/noise_generator.h)
install_client_nonDR_header(drmemtrace scheduler/flexible_queue.h)
install_client_nonDR_header(drmemtrace scheduler/speculator.h)

add_library(test_helpers STATIC tests/test_helpers.cpp)

# We show one example of how to create a standalone analyzer of trace
# files that does not need to link with DR.
add_executable(histogram_launcher
  tools/histogram_launcher.cpp
  )
configure_DynamoRIO_standalone(histogram_launcher)
target_link_libraries(histogram_launcher drmemtrace_analyzer drmemtrace_histogram
  drfrontendlib drmemtrace_invariant_checker)
use_DynamoRIO_extension(histogram_launcher droption)
add_dependencies(histogram_launcher api_headers)

add_executable(prefetch_analyzer_launcher
  tests/prefetch_analyzer_launcher.cpp
  tests/prefetch_analyzer.cpp
  tests/test_helpers.cpp
  )
target_link_libraries(prefetch_analyzer_launcher drmemtrace_analyzer drfrontendlib)
append_property_list(TARGET prefetch_analyzer_launcher
  COMPILE_DEFINITIONS "NO_HELPER_MAIN")
use_DynamoRIO_extension(prefetch_analyzer_launcher droption)
add_dependencies(prefetch_analyzer_launcher api_headers)

add_executable(record_filter_launcher
  tools/record_filter_launcher.cpp
  tests/test_helpers.cpp)
target_link_libraries(record_filter_launcher drmemtrace_analyzer drmemtrace_record_filter)
add_dependencies(record_filter_launcher api_headers)
append_property_list(TARGET record_filter_launcher COMPILE_DEFINITIONS "NO_HELPER_MAIN")
use_DynamoRIO_extension(record_filter_launcher droption)
if (NOT APPLE)
  configure_DynamoRIO_static(record_filter_launcher)
endif()

# We want to use test_helper's disable_popups() but we have _tmain and so do not want
# the test_helper library's main symbol: so we compile ourselves and disable.
add_executable(scheduler_launcher tests/scheduler_launcher.cpp tests/test_helpers.cpp)
append_property_list(TARGET scheduler_launcher COMPILE_DEFINITIONS "NO_HELPER_MAIN")
target_link_libraries(scheduler_launcher drmemtrace_analyzer drfrontendlib)
use_DynamoRIO_extension(scheduler_launcher droption)
add_dependencies(scheduler_launcher api_headers)
# Simple test to ensure this launcher keeps working.
if (X86 AND X64 AND ZIP_FOUND)
  set(trace_dir
    "${PROJECT_SOURCE_DIR}/clients/drcachesim/tests/drmemtrace.threadsig.x64.tracedir")
  # We further shrink the block time for a faster test.
  add_test(NAME tool.scheduler_launcher
    COMMAND scheduler_launcher -trace_dir ${trace_dir} -block_time_scale 0.01)
  set_tests_properties(tool.scheduler_launcher PROPERTIES TIMEOUT ${test_seconds})
endif ()

# We have a companion test built using a separate --build-and-test CMake project in
# tests/analyzer_separate.cpp to better test 3rd-party usage.
set_property(GLOBAL PROPERTY DynamoRIO_drmemtrace_src_dir
  "${CMAKE_CURRENT_SOURCE_DIR}/tests")
set_property(GLOBAL PROPERTY DynamoRIO_drmemtrace_build_dir
  "${CMAKE_CURRENT_BINARY_DIR}/tests")

# We have one more example of a standalone launcher that uses raw2trace to catch
# link errors (xref i#1409).  We just build it to test the linking; no test.
# XXX i#1997: static DR is not fully supported on Mac yet.
if (NOT APPLE)
  add_executable(opcode_mix_launcher
    tools/opcode_mix_launcher.cpp
    )
  # We hit dup symbol errors on Windows so we need libc earlier before DR:
  _DR_get_static_libc_list(static_libc)
  target_link_libraries(opcode_mix_launcher drmemtrace_analyzer drmemtrace_opcode_mix
    drmemtrace_raw2trace drcovlib_static drfrontendlib ${static_libc})
  use_DynamoRIO_extension(opcode_mix_launcher droption)
  add_dependencies(opcode_mix_launcher api_headers)
  configure_DynamoRIO_static(opcode_mix_launcher)
endif ()

target_link_libraries(drmemtrace_launcher ${zlib_libs})
target_link_libraries(histogram_launcher ${zlib_libs})
target_link_libraries(prefetch_analyzer_launcher ${zlib_libs})
target_link_libraries(drmemtrace_raw2trace ${zlib_libs})
target_link_libraries(drmemtrace_analyzer ${zlib_libs})
if (NOT AARCH64 AND NOT APPLE)
  target_link_libraries(opcode_mix_launcher ${zlib_libs})
endif ()
target_link_libraries(scheduler_launcher ${zlib_libs})

macro(add_drmemtrace name type static_DR no_main)
  if (${type} STREQUAL "STATIC")
    if (${static_DR})
      set(ext_sfx "_drstatic")
    else ()
      set(ext_sfx "_static")
    endif ()
  else ()
    set(ext_sfx "")
  endif ()
  set(drmemtrace_srcs
    tracer/tracer.cpp
    tracer/instr_counter.cpp
    tracer/output.cpp
    tracer/instru.cpp
    tracer/instru_offline.cpp
    tracer/instru_online.cpp
    tracer/physaddr.cpp
    tracer/func_trace.cpp
    tracer/raw2trace_shared.cpp
    ${client_and_sim_srcs}
    )
  if (BUILD_PT_TRACER)
    set(drmemtrace_srcs ${drmemtrace_srcs}
      tracer/syscall_pt_trace.cpp
      tracer/kcore_copy.cpp
    )
    add_definitions(-DBUILD_PT_TRACER)
  endif ()
  if (libsnappy)
    set(drmemtrace_srcs ${drmemtrace_srcs}
      tracer/snappy_file_writer.cpp
      common/snappy_consts.cpp
      common/crc32c.cpp
      )
  endif ()

  # i#6412: All implementation shared between the tracer and raw2trace should
  # be in the separate raw2trace_shared files. This is so we can keep the
  # tracer library smaller. The following is a non-exhaustive condition that
  # flags when raw2trace implementation is accidentally added. Including
  # raw2trace.cpp would necessitate inclusion of various other implementations
  # (like for the trace reader_t), which should all be avoided here.
  list (FIND drmemtrace_srcs "tracer/raw2trace.cpp" _raw2trace_index)
  if (${_raw2trace_index} GREATER -1)
    message(FATAL_ERROR
            "drmemtrace should use raw2trace_shared for shared implementation.")
  endif()

  add_library(${name} ${type} ${drmemtrace_srcs})
  if (${no_main})
    append_property_list(TARGET ${name} COMPILE_DEFINITIONS "DRMEMTRACE_NO_MAIN")
  endif ()
  if (${static_DR})
    configure_DynamoRIO_static_client(${name})
  else ()
    configure_DynamoRIO_client(${name})
  endif()
  use_DynamoRIO_extension(${name} drmgr${ext_sfx})
  use_DynamoRIO_extension(${name} drsyms${ext_sfx})
  use_DynamoRIO_extension(${name} drwrap${ext_sfx})
  use_DynamoRIO_extension(${name} drreg${ext_sfx})
  use_DynamoRIO_extension(${name} drutil${ext_sfx})
  use_DynamoRIO_extension(${name} drstatecmp${ext_sfx})
  use_DynamoRIO_extension(${name} drx${ext_sfx})
  use_DynamoRIO_extension(${name} droption)
  use_DynamoRIO_extension(${name} drcovlib${ext_sfx})
  use_DynamoRIO_extension(${name} drbbdup${ext_sfx})
  if (BUILD_PT_TRACER)
    use_DynamoRIO_extension(${name} drpttracer${ext_sfx})
  endif ()
  if (libsnappy)
    target_link_libraries(${name} snappy)
  endif ()
  if (${static_DR})
    target_link_libraries(${name} ${zlib_static_libs})
  else ()
    target_link_libraries(${name} ${zlib_libs})
  endif ()
  if (liblz4)
    target_link_libraries(${name} lz4)
  endif ()
  if (libxxhash)
    target_link_libraries(${name} xxhash)
  endif ()
  if (RISCV64)
    target_link_libraries(${name} atomic)
  endif ()
  add_dependencies(${name} api_headers)
  DR_export_target(${name})
  install_exported_target(${name} ${INSTALL_CLIENTS_LIB})
endmacro()

add_drmemtrace(drmemtrace SHARED OFF OFF)
# This static library links with the DR shared library and has dr_client_main:
add_drmemtrace(drmemtrace_static STATIC OFF OFF)
# This static library links with the DR shared library and has no dr_client_main:
add_drmemtrace(drmemtrace_nomain STATIC OFF ON)
# This static library links with the DR static library and has dr_client_main:
add_drmemtrace(drmemtrace_drstatic STATIC ON OFF)
append_property_list(TARGET drmemtrace_static COMPILE_DEFINITIONS "DRMEMTRACE_STATIC")
# We export drmemtrace.h to the same place as the analysis tool headers
# for simplicity, rather than sticking it into ext/include or sthg.
install_client_nonDR_header(drmemtrace tracer/drmemtrace.h)

add_executable(drraw2trace
  tracer/raw2trace_launcher.cpp
  tracer/instru.cpp
  tracer/instru_online.cpp
  )
target_link_libraries(drraw2trace drmemtrace_raw2trace)
# To avoid dup symbol errors on some VS builds we list drdecode before DR:
target_link_libraries(drraw2trace drdecode)
configure_DynamoRIO_standalone(drraw2trace)
target_link_libraries(drraw2trace drfrontendlib)
use_DynamoRIO_extension(drraw2trace droption)
use_DynamoRIO_extension(drraw2trace drcovlib_static)
# Because we're leveraging instru_online code we have to link with drutil:
use_DynamoRIO_extension(drraw2trace drutil_static)

# We add a useful warning that's not in Wall.
CHECK_C_COMPILER_FLAG("-Wimplicit-fallthrough" implicit_fallthrough_avail)

macro(restore_nonclient_flags target is_test)
  # Restore debug and other flags to our non-client executables
  set_target_properties(${target} PROPERTIES
    COMPILE_FLAGS "${ORIG_CMAKE_CXX_FLAGS}")
  if (NOT DEBUG AND NOT ${is_test})
    append_property_list(TARGET ${target} COMPILE_DEFINITIONS "NDEBUG")
  endif ()
  # However, we need the target os and arch defines (XXX: better way?) for
  # the config, inject, and frontend headers:
  DynamoRIO_extra_defines(extra_defs ON)
  append_property_list(TARGET ${target} COMPILE_DEFINITIONS "${extra_defs}")
  if (implicit_fallthrough_avail)
    append_property_string(TARGET ${target} COMPILE_FLAGS "-Wimplicit-fallthrough")
  endif ()
endmacro()

restore_nonclient_flags(drmemtrace_launcher OFF)
restore_nonclient_flags(drraw2trace OFF)
restore_nonclient_flags(histogram_launcher OFF)
restore_nonclient_flags(record_filter_launcher ON) # Considered a test.
restore_nonclient_flags(prefetch_analyzer_launcher ON) # Considered a test.
if (NOT AARCH64 AND NOT APPLE)
  restore_nonclient_flags(opcode_mix_launcher ON) # Considered a test.
endif ()
restore_nonclient_flags(scheduler_launcher ON) # Considered a test.
restore_nonclient_flags(drmemtrace_simulator OFF)
restore_nonclient_flags(drmemtrace_reuse_distance OFF)
restore_nonclient_flags(drmemtrace_histogram OFF)
restore_nonclient_flags(drmemtrace_reuse_time OFF)
restore_nonclient_flags(drmemtrace_basic_counts OFF)
restore_nonclient_flags(drmemtrace_opcode_mix OFF)
restore_nonclient_flags(drmemtrace_syscall_mix OFF)
restore_nonclient_flags(drmemtrace_view OFF)
restore_nonclient_flags(drmemtrace_func_view OFF)
restore_nonclient_flags(drmemtrace_record_filter OFF)
restore_nonclient_flags(drmemtrace_analyzer OFF)
restore_nonclient_flags(drmemtrace_invariant_checker OFF)
restore_nonclient_flags(drmemtrace_schedule_stats OFF)
restore_nonclient_flags(drmemtrace_schedule_file OFF)
restore_nonclient_flags(drmemtrace_decode_cache OFF)

# We need to pass /EHsc and we pull in libcmtd into drcachesim from a dep lib.
# Thus we need to override the /MT with /MTd.
#
# TODO i#6040: We should add a new configure_original_flage(target) function
# which restores the ORIG_ flags at the source level for all other targets
# in this file which are neither clients nor use DR standalone. We can then
# get rid of add_win32_flags(target) since that just adds a couple of flags
# back, and using the ORIG_ values is preferable.
macro(add_win32_flags target is_test)
  if (DEBUG AND NOT DEFINED ${target}_uses_configure)
    append_property_list(TARGET ${target} COMPILE_DEFINITIONS "DEBUG")
  endif ()
  # We deliberately do not set NDEBUG for release-build tests.
  if (NOT DEBUG AND NOT ${is_test})
    get_property(cur TARGET ${target} PROPERTY COMPILE_DEFINITIONS)
    if (NOT "${cur}" MATCHES "NDEBUG")
      append_property_list(TARGET ${target} COMPILE_DEFINITIONS "NDEBUG")
    endif ()
  endif ()
  if (WIN32)
    if (DEBUG)
      get_property(cur TARGET ${target} PROPERTY COMPILE_FLAGS)
      string(REPLACE "/MT " "" cur "${cur}") # Avoid override warning.
      set_target_properties(${target} PROPERTIES COMPILE_FLAGS "${cur} /EHsc /MTd /Zi")
      append_property_string(TARGET ${target} LINK_FLAGS "/nodefaultlib:libcmt")
    else ()
      append_property_string(TARGET ${target} COMPILE_FLAGS "/EHsc /MT")
    endif ()
  else ()
    # Work around configure_DynamoRIO_static() clobbering flags by re-adding
    # the important ones for our tests, so they can include our headers
    # with C++11-isms.
    get_property(cur TARGET ${target} PROPERTY COMPILE_FLAGS)
    if (NOT cur MATCHES "-std=")
      append_property_string(TARGET ${target} COMPILE_FLAGS "-std=c++11")
    endif ()
    if (DEBUG AND NOT cur MATCHES "-g")
      # We can't use restore_nonclient_flags() for clients, so we manually re-add debug
      # here.
      append_property_string(TARGET ${target} COMPILE_FLAGS "-g")
    endif ()
    if (APPLE)
      # Match the core/ flags.
      append_property_string(TARGET ${target}
        COMPILE_FLAGS "-mmacosx-version-min=${OLDEST_OSX_SUPPPORTED}")
    endif ()
  endif ()
endmacro ()

add_win32_flags(drmemtrace_launcher OFF)
add_win32_flags(drraw2trace OFF)
add_win32_flags(histogram_launcher OFF)
add_win32_flags(record_filter_launcher ON) # Considered a test.
add_win32_flags(prefetch_analyzer_launcher ON) # Considered a test.
add_win32_flags(drmemtrace_raw2trace OFF)
if (NOT AARCH64 AND NOT APPLE)
  add_win32_flags(opcode_mix_launcher ON) # Considered a test.
endif ()
add_win32_flags(scheduler_launcher ON) # Considered a test.
add_win32_flags(drmemtrace_simulator OFF)
add_win32_flags(drmemtrace_reuse_distance OFF)
add_win32_flags(drmemtrace_histogram OFF)
add_win32_flags(drmemtrace_reuse_time OFF)
add_win32_flags(drmemtrace_basic_counts OFF)
add_win32_flags(drmemtrace_opcode_mix OFF)
add_win32_flags(drmemtrace_syscall_mix OFF)
add_win32_flags(drmemtrace_view OFF)
add_win32_flags(drmemtrace_func_view OFF)
add_win32_flags(drmemtrace_record_filter OFF)
add_win32_flags(drmemtrace_analyzer OFF)
add_win32_flags(drmemtrace_invariant_checker OFF)
add_win32_flags(drmemtrace_schedule_stats OFF)
add_win32_flags(drmemtrace_schedule_file OFF)
add_win32_flags(drmemtrace_decode_cache OFF)
add_win32_flags(directory_iterator OFF)
add_win32_flags(test_helpers OFF)
add_win32_flags(drmemtrace_mutex_dbg_owned OFF)
if (WIN32 AND DEBUG)
  get_target_property(sim_srcs drmemtrace_launcher SOURCES)
  get_target_property(raw2trace_srcs drraw2trace SOURCES)
  # The client, and our standalone DR users, had /MT added so we need to override.
  # XXX: solve this by avoiding the /MT in the first place!
  foreach (src ${client_and_sim_srcs} ${sim_srcs} ${raw2trace_srcs} tools/opcode_mix.cpp tools/view.cpp)
    get_property(cur SOURCE ${src} PROPERTY COMPILE_FLAGS)
    string(REPLACE "/MT " "" cur ${cur}) # Avoid override warning.
    set_source_files_properties(${src} COMPILE_FLAGS "${cur} /MTd")
  endforeach ()
endif ()

place_shared_lib_in_lib_dir(drmemtrace)

add_dependencies(drmemtrace_launcher api_headers)

# Provide a hint for how to use the client
if (NOT DynamoRIO_INTERNAL OR NOT "${CMAKE_GENERATOR}" MATCHES "Ninja")
  add_custom_command(TARGET drmemtrace
    POST_BUILD
    COMMAND ${CMAKE_COMMAND}
    ARGS -E echo "Usage: pass to drconfig or drrun: -t drmemtrace"
    VERBATIM)
endif ()

install_target(drmemtrace_launcher ${INSTALL_CLIENTS_BIN})
install_target(drraw2trace ${INSTALL_CLIENTS_BIN})

set(INSTALL_DRCACHESIM_CONFIG ${INSTALL_CLIENTS_BASE})

function (write_config_file dst bindir libdir)
  # We include the alternate-bitwidth path, though it won't be there for
  # a single build dir and such a child will have a fatal error.
  if (X64)
    string(REPLACE "lib64" "lib32" alt_libdir ${libdir})
    set(CUR_BIT "64")
    set(ALT_BIT "32")
  else ()
    set(CUR_BIT "32")
    set(ALT_BIT "64")
    string(REPLACE "lib64" "lib32" alt_libdir ${libdir})
  endif ()
  if (DEBUG)
    set(debugopt "TOOL_OP=-dr_debug")
  else ()
    set(debugopt "")
  endif ()
  file(GENERATE OUTPUT ${dst} CONTENT
"# drmemtrace tracing and analysis tool config file.\n\
FRONTEND_REL=${bindir}/$<TARGET_FILE_NAME:drmemtrace_launcher>\n\
TOOL_OP=-dr\n\
TOOL_OP_DR_PATH\n\
TOOL_OP_DR_BUNDLE=-dr_ops\n\
TOOL_OP=-tracer\n\
CLIENT${CUR_BIT}_REL=${libdir}/${LIB_PFX}drmemtrace${LIB_EXT}\n\
TOOL_OP=-tracer_alt\n\
CLIENT${ALT_BIT}_REL=${alt_libdir}/${LIB_PFX}drmemtrace${LIB_EXT}\n\
${debugopt}\n")
endfunction ()

if (X64)
  set(CONFIG_INSTALL ${PROJECT_BINARY_DIR}/drmemtrace.drrun64)
  set(CONFIG_BUILD ${PROJECT_BINARY_DIR}/tools/drmemtrace.drrun64)
  # Support the older launcher name (i#6660 applied s/drcachesim/drmemtrace/ as
  # "drcachesim" is just one tool and we use "drmemtrace" to refer to the framework).
  set(CONFIG_OLD_INSTALL ${PROJECT_BINARY_DIR}/drcachesim.drrun64)
  set(CONFIG_OLD_BUILD ${PROJECT_BINARY_DIR}/tools/drcachesim.drrun64)
else (X64)
  set(CONFIG_INSTALL ${PROJECT_BINARY_DIR}/drmemtrace.drrun32)
  set(CONFIG_BUILD ${PROJECT_BINARY_DIR}/tools/drmemtrace.drrun32)
  set(CONFIG_OLD_INSTALL ${PROJECT_BINARY_DIR}/drcachesim.drrun32)
  set(CONFIG_OLD_BUILD ${PROJECT_BINARY_DIR}/tools/drcachesim.drrun32)
endif (X64)

set(BUILD_CLIENTS_BIN clients/${INSTALL_BIN})
set(BUILD_CLIENTS_LIB clients/${INSTALL_LIB})

write_config_file(${CONFIG_INSTALL} ${INSTALL_CLIENTS_BIN} ${INSTALL_CLIENTS_LIB})
write_config_file(${CONFIG_BUILD} ${BUILD_CLIENTS_BIN} ${BUILD_CLIENTS_LIB})
# Support the older launcher name (i#6660 renamed it).
write_config_file(${CONFIG_OLD_INSTALL} ${INSTALL_CLIENTS_BIN} ${INSTALL_CLIENTS_LIB})
write_config_file(${CONFIG_OLD_BUILD} ${BUILD_CLIENTS_BIN} ${BUILD_CLIENTS_LIB})

DR_install(FILES "${CONFIG_INSTALL}" DESTINATION ${INSTALL_DRCACHESIM_CONFIG})
register_tool_file("drmemtrace")
# Support the older launcher name (i#6660 renamed it).
DR_install(FILES "${CONFIG_OLD_INSTALL}" DESTINATION ${INSTALL_DRCACHESIM_CONFIG})
register_tool_file("drcachesim")

if (WIN32)
  # drcachesim needs these dlls (i#1737 would eliminate this)
  DynamoRIO_get_full_path(injectlib_loc drinjectlib "${location_suffix}")
  DR_install(FILES "${injectlib_loc}"  DESTINATION "${INSTALL_CLIENTS_BIN}")
  DynamoRIO_get_full_path(configlib_loc drconfiglib "${location_suffix}")
  DR_install(FILES "${configlib_loc}"  DESTINATION "${INSTALL_CLIENTS_BIN}")
  DynamoRIO_get_full_path(drlib_loc dynamorio "${location_suffix}")
  DR_install(FILES "${drlib_loc}"  DESTINATION "${INSTALL_CLIENTS_BIN}")
  add_custom_command(TARGET drmemtrace_launcher POST_BUILD
    COMMAND ${CMAKE_COMMAND} ARGS -E copy ${DR_LIBRARY_BASE_DIRECTORY}/drinjectlib.dll
    ${PROJECT_BINARY_DIR}/${BUILD_CLIENTS_BIN}/drinjectlib.dll VERBATIM)
  add_custom_command(TARGET drmemtrace_launcher POST_BUILD
    COMMAND ${CMAKE_COMMAND} ARGS -E copy ${DR_LIBRARY_BASE_DIRECTORY}/drconfiglib.dll
    ${PROJECT_BINARY_DIR}/${BUILD_CLIENTS_BIN}/drconfiglib.dll VERBATIM)
  # Avoid dueling racy copies (i#4668).
  add_dependencies(drmemtrace_launcher client_dr_copy)
endif ()

add_subdirectory(tools/external)

##################################################
# Test executables
#
# We build larger executables here.  All tests are added in suite/tests/ except unit tests.
# Be sure to give the targets qualified test names ("tool.drcache*...").

# XXX: Try to add a macro add_drcachesim_test() to share common pieces
# of these executables.

if (BUILD_TESTS)
  add_executable(tool.reuse_distance.unit_tests tests/reuse_distance_test.cpp)
  target_link_libraries(tool.reuse_distance.unit_tests drmemtrace_reuse_distance
    drmemtrace_static test_helpers)
  add_win32_flags(tool.reuse_distance.unit_tests ON)
  add_test(NAME tool.reuse_distance.unit_tests
       COMMAND tool.reuse_distance.unit_tests)
  set_tests_properties(tool.reuse_distance.unit_tests PROPERTIES TIMEOUT ${test_seconds})

  add_executable(tool.drcachesim.unit_tests tests/drcachesim_unit_tests.cpp
    tests/cache_replacement_policy_unit_test.cpp tests/config_reader_unit_test.cpp
    tests/v2p_reader_unit_test.cpp tests/tlb_simulator_unit_test.cpp)
  target_link_libraries(tool.drcachesim.unit_tests drmemtrace_simulator
    # Link test_helpers first, or else the zlib main takes over.
    drmemtrace_static drmemtrace_analyzer test_helpers ${zlib_libs})
  add_win32_flags(tool.drcachesim.unit_tests ON)
  add_test(NAME tool.drcachesim.unit_tests
           COMMAND tool.drcachesim.unit_tests
           ${PROJECT_SOURCE_DIR}/clients/drcachesim/tests)
  set_tests_properties(tool.drcachesim.unit_tests PROPERTIES TIMEOUT ${test_seconds})

  # XXX i#3544 Make raw2trace_unit_tests compilable in RISCV64.
  if (NOT RISCV64)
    add_executable(tool.drcacheoff.raw2trace_unit_tests tests/raw2trace_unit_tests.cpp)
    configure_DynamoRIO_standalone(tool.drcacheoff.raw2trace_unit_tests)
    add_win32_flags(tool.drcacheoff.raw2trace_unit_tests ON)
    target_link_libraries(tool.drcacheoff.raw2trace_unit_tests drmemtrace_raw2trace
      test_helpers)
    use_DynamoRIO_extension(tool.drcacheoff.raw2trace_unit_tests drdecode)
    use_DynamoRIO_extension(tool.drcacheoff.raw2trace_unit_tests drcovlib_static)
    add_test(NAME tool.drcacheoff.raw2trace_unit_tests
      COMMAND tool.drcacheoff.raw2trace_unit_tests)
    set_tests_properties(tool.drcacheoff.raw2trace_unit_tests PROPERTIES TIMEOUT
      ${test_seconds})
  endif ()

  add_executable(tool.scheduler.unit_tests tests/scheduler_unit_tests.cpp)
  target_link_libraries(tool.scheduler.unit_tests drmemtrace_analyzer test_helpers)
  if (WIN32)
    # We have a dup symbol from linking in DR.  Linking libc first doesn't help.
    append_property_string(TARGET tool.scheduler.unit_tests LINK_FLAGS
      "/force:multiple")
  endif ()
  configure_DynamoRIO_standalone(tool.scheduler.unit_tests)
  add_win32_flags(tool.scheduler.unit_tests ON)
  add_test(NAME tool.scheduler.unit_tests
    COMMAND tool.scheduler.unit_tests
    ${PROJECT_SOURCE_DIR}/clients/drcachesim/tests)
  set_tests_properties(tool.scheduler.unit_tests PROPERTIES TIMEOUT ${test_seconds})

  add_executable(tool.drcacheoff.flexible_queue_tests tests/flexible_queue_tests.cpp)
  add_win32_flags(tool.drcacheoff.flexible_queue_tests ON)
  target_link_libraries(tool.drcacheoff.flexible_queue_tests test_helpers)
  add_test(NAME tool.drcacheoff.flexible_queue_tests
    COMMAND tool.drcacheoff.flexible_queue_tests)
  set_tests_properties(tool.drcacheoff.flexible_queue_tests PROPERTIES TIMEOUT
    ${test_seconds})

  add_executable(tool.drcachesim.core_sharded tests/core_sharded_test.cpp
    # XXX: Better to put these into libraries but that requires a bigger cleanup:
    analyzer_multi.cpp ${client_and_sim_srcs} reader/ipc_reader.cpp
    ${loader_srcs})
  target_link_libraries(tool.drcachesim.core_sharded test_helpers
    drmemtrace_raw2trace drmemtrace_simulator drmemtrace_reuse_distance
    drmemtrace_histogram drmemtrace_reuse_time drmemtrace_basic_counts
    drmemtrace_opcode_mix drmemtrace_syscall_mix drmemtrace_view drmemtrace_func_view
    drmemtrace_raw2trace directory_iterator drmemtrace_invariant_checker
    drmemtrace_schedule_stats drmemtrace_analyzer drmemtrace_record_filter)
  if (UNIX)
    target_link_libraries(tool.drcachesim.core_sharded dl)
  endif ()
  add_win32_flags(tool.drcachesim.core_sharded ON)
  if (WIN32)
    # We have a dup symbol from linking in DR.  Linking libc first doesn't help.
    append_property_string(TARGET tool.drcachesim.core_sharded LINK_FLAGS
      "/force:multiple")
  endif ()
  configure_DynamoRIO_standalone(tool.drcachesim.core_sharded)
  use_DynamoRIO_extension(tool.drcachesim.core_sharded droption)
  use_DynamoRIO_extension(tool.drcachesim.core_sharded drreg_static)
  use_DynamoRIO_extension(tool.drcachesim.core_sharded drcovlib_static)
  use_DynamoRIO_extension(tool.drcachesim.core_sharded drutil_static)
  add_test(NAME tool.drcachesim.core_sharded
    COMMAND tool.drcachesim.core_sharded
    ${PROJECT_SOURCE_DIR}/clients/drcachesim/tests)
  set_tests_properties(tool.drcachesim.core_sharded PROPERTIES TIMEOUT ${test_seconds})

  # XXX i#5675: add tests for other environments. Currently, the repository does not have
  # a checked-in post-processed trace for x86-32 or AArchXX.  We are also limited to
  # the old format due to missing zip support so we can't use the new threadsig.x64.
  if (X86 AND X64 AND ZLIB_FOUND)
    set(trace_dir
      "${PROJECT_SOURCE_DIR}/clients/drcachesim/tests/drmemtrace.legacy-for-record-filter.x64.tracedir")
    set(tmp_output_dir ${PROJECT_BINARY_DIR}/record_filter_tests_tmp_output)
    file(MAKE_DIRECTORY ${tmp_output_dir})
    add_executable(tool.drcacheoff.record_filter_unit_tests
                   tests/record_filter_unit_tests.cpp)
    configure_DynamoRIO_standalone(tool.drcacheoff.record_filter_unit_tests)
    add_win32_flags(tool.drcacheoff.record_filter_unit_tests ON)
    target_link_libraries(tool.drcacheoff.record_filter_unit_tests drmemtrace_analyzer
      drmemtrace_basic_counts drmemtrace_record_filter test_helpers)
    add_test(NAME tool.drcacheoff.record_filter_unit_tests
             COMMAND tool.drcacheoff.record_filter_unit_tests --trace_dir
                     ${trace_dir} --tmp_output_dir ${tmp_output_dir})
    set_tests_properties(tool.drcacheoff.record_filter_unit_tests PROPERTIES TIMEOUT
      ${test_seconds})
  endif ()

  add_executable(tool.drcacheoff.trace_interval_analysis_unit_tests
                 tests/trace_interval_analysis_unit_tests.cpp)
  add_win32_flags(tool.drcacheoff.trace_interval_analysis_unit_tests ON)
  target_link_libraries(tool.drcacheoff.trace_interval_analysis_unit_tests
    drmemtrace_analyzer drdecode test_helpers)
  add_test(NAME tool.drcacheoff.trace_interval_analysis_unit_tests
           COMMAND tool.drcacheoff.trace_interval_analysis_unit_tests)
  set_tests_properties(tool.drcacheoff.trace_interval_analysis_unit_tests PROPERTIES
    TIMEOUT ${test_seconds})

  add_executable(tool.drcacheoff.analysis_unit_tests tests/analysis_unit_tests.cpp)
  add_win32_flags(tool.drcacheoff.analysis_unit_tests ON)
  target_link_libraries(tool.drcacheoff.analysis_unit_tests
    drmemtrace_analyzer test_helpers)
  add_test(NAME tool.drcacheoff.analysis_unit_tests
    COMMAND tool.drcacheoff.analysis_unit_tests)
  set_tests_properties(tool.drcacheoff.analysis_unit_tests PROPERTIES
    TIMEOUT ${test_seconds})

  if (DR_HOST_AARCH64 AND NOT APPLE) # i#1997: static DR on Mac NYI.
    add_executable(tool.drcacheoff.burst_aarch64_sys tests/burst_aarch64_sys.cpp)
    configure_DynamoRIO_static(tool.drcacheoff.burst_aarch64_sys)
    use_DynamoRIO_static_client(tool.drcacheoff.burst_aarch64_sys drmemtrace_static)
    target_link_libraries(tool.drcacheoff.burst_aarch64_sys drmemtrace_raw2trace
      drmemtrace_analyzer test_helpers)
    use_DynamoRIO_drmemtrace_tracer(tool.drcacheoff.burst_aarch64_sys)
    add_win32_flags(tool.drcacheoff.burst_aarch64_sys ON)
  endif ()

  add_executable(tool.drcachesim.decode_cache_test tests/decode_cache_test.cpp)
  configure_DynamoRIO_standalone(tool.drcachesim.decode_cache_test)
  add_win32_flags(tool.drcachesim.decode_cache_test ON)
  target_link_libraries(tool.drcachesim.decode_cache_test
    drmemtrace_decode_cache test_helpers)
  add_test(NAME tool.drcachesim.decode_cache_test
           COMMAND tool.drcachesim.decode_cache_test)
  set_tests_properties(tool.drcachesim.decode_cache_test PROPERTIES
    TIMEOUT ${test_seconds})

  add_executable(tool.drcacheoff.opcode_mix_test tests/opcode_mix_test.cpp)
  configure_DynamoRIO_standalone(tool.drcacheoff.opcode_mix_test)
  add_win32_flags(tool.drcacheoff.opcode_mix_test ON)
  target_link_libraries(tool.drcacheoff.opcode_mix_test
    drmemtrace_opcode_mix drmemtrace_decode_cache test_helpers)
  add_test(NAME tool.drcacheoff.opcode_mix_test
           COMMAND tool.drcacheoff.opcode_mix_test)
  set_tests_properties(tool.drcacheoff.opcode_mix_test PROPERTIES
    TIMEOUT ${test_seconds})

  # XXX i#1997: dynamorio_static is not supported on Mac yet
  # XXX i#2949: gcc 7.3 fails to link certain configs
  # TODO i#3544: Port tests to RISC-V 64
  if (NOT APPLE AND NOT DISABLE_FOR_BUG_2949 AND NOT RISCV64)
    # Tests for the cache miss analyzer.
    add_executable(tool.drcachesim.miss_analyzer_unit_test tests/cache_miss_analyzer_test.cpp)
    target_link_libraries(tool.drcachesim.miss_analyzer_unit_test drmemtrace_simulator
      drmemtrace_static drmemtrace_analyzer test_helpers ${zlib_libs})
    add_win32_flags(tool.drcachesim.miss_analyzer_unit_test ON)
    add_test(NAME tool.drcachesim.miss_analyzer_unit_test
             COMMAND tool.drcachesim.miss_analyzer_unit_test)
    set_tests_properties(tool.drcachesim.miss_analyzer_unit_test PROPERTIES
      TIMEOUT ${test_seconds})

    add_executable(tool.drcachesim.invariant_checker_test tests/invariant_checker_test.cpp)
    configure_DynamoRIO_standalone(tool.drcachesim.invariant_checker_test)
    add_win32_flags(tool.drcachesim.invariant_checker_test ON)
    target_link_libraries(tool.drcachesim.invariant_checker_test
        drmemtrace_static drmemtrace_analyzer drmemtrace_invariant_checker test_helpers)
    add_test(NAME tool.drcachesim.invariant_checker_test
             COMMAND tool.drcachesim.invariant_checker_test)
    set_tests_properties(tool.drcachesim.invariant_checker_test PROPERTIES
      TIMEOUT ${test_seconds})

    add_executable(tool.drcachesim.schedule_file_test tests/schedule_file_test.cpp)
    add_win32_flags(tool.drcachesim.schedule_file_test ON)
    target_link_libraries(tool.drcachesim.schedule_file_test
        drmemtrace_schedule_file test_helpers)
    add_test(NAME tool.drcachesim.schedule_file_test
             COMMAND tool.drcachesim.schedule_file_test)
    set_tests_properties(tool.drcachesim.schedule_file_test PROPERTIES
      TIMEOUT ${test_seconds})

    add_executable(tool.drcachesim.schedule_stats_test tests/schedule_stats_test.cpp)
    configure_DynamoRIO_standalone(tool.drcachesim.schedule_stats_test)
    add_win32_flags(tool.drcachesim.schedule_stats_test ON)
    target_link_libraries(tool.drcachesim.schedule_stats_test drmemtrace_schedule_stats
        drmemtrace_static drmemtrace_analyzer test_helpers)
    add_test(NAME tool.drcachesim.schedule_stats_test
             COMMAND tool.drcachesim.schedule_stats_test)
    set_tests_properties(tool.drcachesim.schedule_stats_test PROPERTIES
      TIMEOUT ${test_seconds})

    add_executable(tool.drcacheoff.view_test tests/view_test.cpp reader/file_reader.cpp)
    configure_DynamoRIO_standalone(tool.drcacheoff.view_test)
    add_win32_flags(tool.drcacheoff.view_test ON)
    target_link_libraries(tool.drcacheoff.view_test drmemtrace_view drmemtrace_raw2trace
      drmemtrace_analyzer drmemtrace_decode_cache test_helpers)
    use_DynamoRIO_extension(tool.drcacheoff.view_test drreg_static)
    use_DynamoRIO_extension(tool.drcacheoff.view_test drcovlib_static)
    use_DynamoRIO_extension(tool.drcacheoff.view_test drdecode)
    add_test(NAME tool.drcacheoff.view_test
      COMMAND tool.drcacheoff.view_test)
    set_tests_properties(tool.drcacheoff.view_test PROPERTIES TIMEOUT ${test_seconds})

    add_executable(tool.drcachesim.histogram_test
      tools/histogram.cpp tests/histogram_test.cpp)
    target_link_libraries(tool.drcachesim.histogram_test
      drmemtrace_static drmemtrace_analyzer test_helpers)
    add_win32_flags(tool.drcachesim.histogram_test ON)
    add_test(NAME tool.drcachesim.histogram_test
             COMMAND tool.drcachesim.histogram_test)
    set_tests_properties(tool.drcachesim.histogram_test PROPERTIES
      TIMEOUT ${test_seconds})

    add_executable(tool.drcacheoff.burst_static tests/burst_static.cpp)
    configure_DynamoRIO_static(tool.drcacheoff.burst_static)
    use_DynamoRIO_static_client(tool.drcacheoff.burst_static drmemtrace_static)
    target_link_libraries(tool.drcacheoff.burst_static test_helpers)
    add_win32_flags(tool.drcacheoff.burst_static ON)

    add_executable(tool.drcacheoff.burst_replace tests/burst_replace.cpp)
    configure_DynamoRIO_static(tool.drcacheoff.burst_replace)
    use_DynamoRIO_static_client(tool.drcacheoff.burst_replace drmemtrace_static)
    target_link_libraries(tool.drcacheoff.burst_replace drmemtrace_raw2trace
      test_helpers)
    if (WIN32)
      # burst_replace is unusual in cramming the tracer and post-processor into the
      # same binary and we need some massaging to avoid duplicate symbol link errors.
      target_link_libraries(tool.drcacheoff.burst_replace ${static_libc})
    endif ()
    add_win32_flags(tool.drcacheoff.burst_replace ON)
    use_DynamoRIO_drmemtrace_tracer(tool.drcacheoff.burst_replace)
    use_DynamoRIO_extension(tool.drcacheoff.burst_replace drcovlib_static)

    add_executable(tool.drcacheoff.burst_replaceall tests/burst_replaceall.cpp)
    configure_DynamoRIO_static(tool.drcacheoff.burst_replaceall)
    use_DynamoRIO_static_client(tool.drcacheoff.burst_replaceall drmemtrace_static)
    target_link_libraries(tool.drcacheoff.burst_replaceall test_helpers)
    add_win32_flags(tool.drcacheoff.burst_replaceall ON)
    use_DynamoRIO_extension(tool.drcacheoff.burst_replaceall drcontainers)
    use_DynamoRIO_drmemtrace_tracer(tool.drcacheoff.burst_replaceall)
    link_with_pthread(tool.drcacheoff.burst_replaceall)

    add_executable(tool.drcacheoff.burst_malloc tests/burst_malloc.cpp)
    configure_DynamoRIO_static(tool.drcacheoff.burst_malloc)
    use_DynamoRIO_static_client(tool.drcacheoff.burst_malloc drmemtrace_static)
    target_link_libraries(tool.drcacheoff.burst_malloc drmemtrace_raw2trace
        drmemtrace_analyzer test_helpers)
    if (WIN32)
      # Just like for burst_replace + burst_futex, linking together takes effort.
      target_link_libraries(tool.drcacheoff.burst_malloc ${static_libc})
    endif ()
    add_win32_flags(tool.drcacheoff.burst_malloc ON)
    use_DynamoRIO_drmemtrace_tracer(tool.drcacheoff.burst_malloc)
    if (UNIX)
      append_property_string(SOURCE tests/burst_malloc.cpp
        # Allow our different-arg-count aliases.
        COMPILE_FLAGS "-Wno-attribute-alias")
    endif ()

    add_executable(tool.drcacheoff.burst_reattach tests/burst_reattach.cpp)
    configure_DynamoRIO_static(tool.drcacheoff.burst_reattach)
    use_DynamoRIO_static_client(tool.drcacheoff.burst_reattach drmemtrace_static)
    target_link_libraries(tool.drcacheoff.burst_reattach test_helpers)
    add_win32_flags(tool.drcacheoff.burst_reattach ON)

    add_executable(tool.drcacheoff.burst_threads tests/burst_threads.cpp)
    configure_DynamoRIO_static(tool.drcacheoff.burst_threads)
    use_DynamoRIO_static_client(tool.drcacheoff.burst_threads drmemtrace_static)
    target_link_libraries(tool.drcacheoff.burst_threads test_helpers)
    add_win32_flags(tool.drcacheoff.burst_threads ON)
    link_with_pthread(tool.drcacheoff.burst_threads)

    add_executable(tool.drcacheoff.burst_threadfilter tests/burst_threadfilter.cpp)
    configure_DynamoRIO_static(tool.drcacheoff.burst_threadfilter)
    use_DynamoRIO_static_client(tool.drcacheoff.burst_threadfilter drmemtrace_static)
    target_link_libraries(tool.drcacheoff.burst_threadfilter test_helpers)
    add_win32_flags(tool.drcacheoff.burst_threadfilter ON)
    link_with_pthread(tool.drcacheoff.burst_threadfilter)

    if (X64 AND UNIX)
      add_executable(tool.drcacheoff.burst_noreach tests/burst_noreach.cpp)
      configure_DynamoRIO_static(tool.drcacheoff.burst_noreach)
      use_DynamoRIO_static_client(tool.drcacheoff.burst_noreach drmemtrace_static)
      target_link_libraries(tool.drcacheoff.burst_noreach test_helpers)
      add_win32_flags(tool.drcacheoff.burst_noreach ON)
    endif ()
    if (LINUX) # Uses mremap.
      add_executable(tool.drcacheoff.burst_maps tests/burst_maps.cpp)
      configure_DynamoRIO_static(tool.drcacheoff.burst_maps)
      use_DynamoRIO_static_client(tool.drcacheoff.burst_maps drmemtrace_nomain)
      target_link_libraries(tool.drcacheoff.burst_maps test_helpers)
      add_win32_flags(tool.drcacheoff.burst_maps ON)
    endif ()
    if (LINUX)
      add_executable(tool.drcacheoff.burst_syscall_inject tests/burst_syscall_inject.cpp)
      configure_DynamoRIO_static(tool.drcacheoff.burst_syscall_inject)
      use_DynamoRIO_static_client(tool.drcacheoff.burst_syscall_inject drmemtrace_static)
      target_link_libraries(tool.drcacheoff.burst_syscall_inject drmemtrace_raw2trace
        drmemtrace_analyzer test_helpers drmemtrace_basic_counts
        drmemtrace_syscall_mix drmemtrace_invariant_checker)
      add_win32_flags(tool.drcacheoff.burst_syscall_inject ON)
      use_DynamoRIO_drmemtrace_tracer(tool.drcacheoff.burst_syscall_inject)
    endif ()

    if (LINUX AND BUILD_PT_POST_PROCESSOR AND BUILD_PT_TRACER)
      add_executable(tool.drcacheoff.burst_syscall_pt_SUDO tests/burst_syscall_pt.cpp)
      configure_DynamoRIO_static(tool.drcacheoff.burst_syscall_pt_SUDO)
      use_DynamoRIO_static_client(tool.drcacheoff.burst_syscall_pt_SUDO drmemtrace_static)
      target_link_libraries(tool.drcacheoff.burst_syscall_pt_SUDO drmemtrace_raw2trace
          drmemtrace_analyzer test_helpers drmemtrace_basic_counts)
      add_win32_flags(tool.drcacheoff.burst_syscall_pt_SUDO ON)
      use_DynamoRIO_drmemtrace_tracer(tool.drcacheoff.burst_syscall_pt_SUDO)
      link_with_pthread(tool.drcacheoff.burst_syscall_pt_SUDO)
    endif ()

    if (UNIX)
      if (X86 AND NOT APPLE) # This test is x86-specific.
        # uses ptrace and looks for linux-specific syscalls
        add_executable(tool.drcacheoff.raw2trace_io tests/raw2trace_io.cpp
          tracer/instru.cpp
          tracer/instru_online.cpp)
        configure_DynamoRIO_standalone(tool.drcacheoff.raw2trace_io)
        add_win32_flags(tool.drcacheoff.raw2trace_io ON)
        target_link_libraries(tool.drcacheoff.raw2trace_io drmemtrace_raw2trace
          test_helpers)
        use_DynamoRIO_extension(tool.drcacheoff.raw2trace_io droption)
        target_link_libraries(tool.drcacheoff.raw2trace_io drdecode)
        use_DynamoRIO_extension(tool.drcacheoff.raw2trace_io drcovlib_static)
        # Because we're leveraging instru_online code we have to link with drutil:
        use_DynamoRIO_extension(tool.drcacheoff.raw2trace_io drutil_static)
      endif ()

      # XXX i#2099: the weak symbol is not supported on Windows.
      add_executable(tool.drcacheoff.burst_client tests/burst_static.cpp)
      append_property_list(TARGET tool.drcacheoff.burst_client
        COMPILE_DEFINITIONS "TEST_APP_DR_CLIENT_MAIN")
      configure_DynamoRIO_static(tool.drcacheoff.burst_client)
      use_DynamoRIO_static_client(tool.drcacheoff.burst_client drmemtrace_nomain)
      target_link_libraries(tool.drcacheoff.burst_client test_helpers)
      # A nop, keep it for the future Windows support.
      add_win32_flags(tool.drcacheoff.burst_client ON)

      # Test a pure-static-link app.
      # We ignore "warning: Using 'dlopen' in statically linked applications requires
      # at runtime the shared libraries from the glibc version used for linking".
      # XXX: We can only successfully build this if static libpthread is available,
      # which is only recent glibc 2.34+ such as Ubuntu22+. We also limit to 64-bit
      # due to pain building 32-bit on a 64-bit machine.
      if (X64 AND "${libpthread}" MATCHES ".a$")
        add_executable(tool.drcacheoff.purestatic tests/burst_static.cpp)
        append_property_list(TARGET tool.drcacheoff.purestatic
          LINK_FLAGS "-static -Wl,--no-export-dynamic")
        configure_DynamoRIO_static(tool.drcacheoff.purestatic)
        use_DynamoRIO_static_client(tool.drcacheoff.purestatic drmemtrace_drstatic)
        target_link_libraries(tool.drcacheoff.purestatic test_helpers)
      endif ()
    endif ()

    if (NOT RISCV64) # TODO i#3544: Port tests to RISC-V 64
      set(source_abs "${CMAKE_CURRENT_SOURCE_DIR}/tests/burst_traceopts.cpp")
      set(asm_deps
        "${PROJECT_SOURCE_DIR}/core/arch/asm_defines.asm"
        "${PROJECT_BINARY_DIR}/configure.h")
      include_directories(${PROJECT_SOURCE_DIR}/core/arch) # asm_defines.asm
      add_split_asm_target("${source_abs}" asm_source gen_asm_tgt
        "_asm" "" "${asm_deps}")
      add_executable(tool.drcacheoff.burst_traceopts ${source_abs}
        ${asm_source}
        # This test includes related unit tests for classes used for trace opts.
        "${CMAKE_CURRENT_SOURCE_DIR}/tests/reg_id_set_unit_tests.cpp")
      configure_DynamoRIO_static(tool.drcacheoff.burst_traceopts)
      if ("${CMAKE_GENERATOR}" MATCHES "Visual Studio")
        add_dependencies(tool.drcacheoff.burst_traceopts ${gen_asm_tgt})
      endif ()
      use_DynamoRIO_static_client(tool.drcacheoff.burst_traceopts drmemtrace_static)
      target_link_libraries(tool.drcacheoff.burst_traceopts drmemtrace_raw2trace
        drmemtrace_analyzer test_helpers)
      if (WIN32)
        # Just like for burst_replace, linking everything together takes effort.
        target_link_libraries(tool.drcacheoff.burst_traceopts ${static_libc})
      endif ()
      set(tool.drcacheoff.burst_traceopts_uses_configure ON) # Avoid dup DEBUG.
      add_win32_flags(tool.drcacheoff.burst_traceopts ON)
      use_DynamoRIO_drmemtrace_tracer(tool.drcacheoff.burst_traceopts)
      use_DynamoRIO_extension(tool.drcacheoff.burst_traceopts drcovlib_static)
    endif (NOT RISCV64)

    if (NOT RISCV64) # TODO i#3544: Port tests to RISC-V 64
      add_executable(tool.drcacheoff.windows-timestamps
        "${CMAKE_CURRENT_SOURCE_DIR}/tests/window_test.cpp")
      configure_DynamoRIO_static(tool.drcacheoff.windows-timestamps)
      use_DynamoRIO_static_client(tool.drcacheoff.windows-timestamps drmemtrace_static)
      target_link_libraries(tool.drcacheoff.windows-timestamps drmemtrace_raw2trace
        drmemtrace_analyzer test_helpers)
      if (WIN32)
        # Just like for burst_replace, linking everything together takes effort.
        target_link_libraries(tool.drcacheoff.windows-timestamps ${static_libc})
      endif ()
      add_win32_flags(tool.drcacheoff.windows-timestamps ON)
      use_DynamoRIO_drmemtrace_tracer(tool.drcacheoff.windows-timestamps)
    endif (NOT RISCV64)

    if (LINUX) # Futex is Linux-only.
      add_executable(tool.drcacheoff.burst_futex
        "${CMAKE_CURRENT_SOURCE_DIR}/tests/burst_futex.cpp")
      configure_DynamoRIO_static(tool.drcacheoff.burst_futex)
      use_DynamoRIO_static_client(tool.drcacheoff.burst_futex drmemtrace_static)
      target_link_libraries(tool.drcacheoff.burst_futex drmemtrace_raw2trace
        drmemtrace_analyzer test_helpers)
      if (WIN32)
        # Just like for burst_replace, linking everything together takes effort.
        target_link_libraries(tool.drcacheoff.burst_futex ${static_libc})
      endif ()
      add_win32_flags(tool.drcacheoff.burst_futex ON)
      use_DynamoRIO_drmemtrace_tracer(tool.drcacheoff.burst_futex)

      # -time_syscall_scale is Linux-only.
      add_executable(tool.drcacheoff.burst_sleep
        "${CMAKE_CURRENT_SOURCE_DIR}/tests/burst_sleep.cpp")
      configure_DynamoRIO_static(tool.drcacheoff.burst_sleep)
      use_DynamoRIO_static_client(tool.drcacheoff.burst_sleep drmemtrace_static)
      target_link_libraries(tool.drcacheoff.burst_sleep drmemtrace_raw2trace
        drmemtrace_analyzer test_helpers)
      use_DynamoRIO_drmemtrace_tracer(tool.drcacheoff.burst_sleep)
    endif ()

  endif ()

  if (X86 AND X64 AND ZIP_FOUND)
    # XXX i#5538: Add trace files for other arches.
    set(zip_path
      "${PROJECT_SOURCE_DIR}/clients/drcachesim/tests/drmemtrace.allasm_x86_64.trace.zip")
    add_executable(tool.drcacheoff.skip_unit_tests tests/skip_unit_tests.cpp)
    configure_DynamoRIO_standalone(tool.drcacheoff.skip_unit_tests)
    target_link_libraries(tool.drcacheoff.skip_unit_tests drmemtrace_analyzer
      drmemtrace_view test_helpers ${zlib_libs})
    add_win32_flags(tool.drcacheoff.skip_unit_tests ON)
    use_DynamoRIO_extension(tool.drcacheoff.skip_unit_tests drreg_static)
    use_DynamoRIO_extension(tool.drcacheoff.skip_unit_tests drcovlib_static)
    use_DynamoRIO_extension(tool.drcacheoff.skip_unit_tests drdecode)
    add_test(NAME tool.drcacheoff.skip_unit_tests
             COMMAND tool.drcacheoff.skip_unit_tests --trace_file ${zip_path})
    set_tests_properties(tool.drcacheoff.skip_unit_tests PROPERTIES
      TIMEOUT ${test_seconds})
  endif ()

  add_executable(drmemtrace_shared_raw2trace_tests
                 tests/drmemtrace_shared_raw2trace_tests.cpp)
  configure_DynamoRIO_standalone(drmemtrace_shared_raw2trace_tests)
  # This should not include raw2trace code. We have a check in add_drmemtrace
  # that would fail if drmemtrace_static includes raw2trace.cpp.
  target_link_libraries(drmemtrace_shared_raw2trace_tests drmemtrace_static
                        test_helpers)
  add_win32_flags(drmemtrace_shared_raw2trace_tests ON)
  add_test(NAME drmemtrace_shared_raw2trace_tests
           COMMAND drmemtrace_shared_raw2trace_tests)
  set_tests_properties(drmemtrace_shared_raw2trace_tests PROPERTIES
    TIMEOUT ${test_seconds})

  if (X86 AND X64 AND LINUX)
    add_executable(tool.drcacheoff.longblock tests/burst_longblock.cpp)
    configure_DynamoRIO_static(tool.drcacheoff.longblock)
    use_DynamoRIO_static_client(tool.drcacheoff.longblock drmemtrace_static)
    target_link_libraries(tool.drcacheoff.longblock test_helpers)
    add_win32_flags(tool.drcacheoff.longblock ON)
    link_with_pthread(tool.drcacheoff.longblock)
  endif ()
endif ()

##################################################
# Documentation

# We auto-generate the list of options in the html docs via this helper app.
# i#1730: We cannot execute this when cross-compiling so for now we generate
# docs without this list (better than no docs at all).
add_executable(drcachesim_ops
  optionlist.cpp
  common/options.cpp)
set_target_properties(drcachesim_ops PROPERTIES COMPILE_FLAGS "${ORIG_CMAKE_CXX_FLAGS}")
add_win32_flags(drcachesim_ops OFF)
use_DynamoRIO_extension(drcachesim_ops droption)
add_dependencies(drcachesim_ops api_headers)

# We then have to insert it into the doxygen files at build time:
set(srcdoc ${CMAKE_CURRENT_SOURCE_DIR}/docs/drcachesim.dox.in)
set(gendoc ${CMAKE_CURRENT_BINARY_DIR}/docs/drcachesim.dox)
set(doctgt drcachesim_docs)
configure_file(${CMAKE_CURRENT_SOURCE_DIR}/docs/new-features-encodings-seek.pdf
  ${CMAKE_CURRENT_BINARY_DIR}/docs/new-features-encodings-seek.pdf COPYONLY)

get_property(dox_extras GLOBAL PROPERTY DynamoRIO_dox_extras)
set_property(GLOBAL PROPERTY DynamoRIO_dox_extras ${dox_extras} ${gendoc})

get_property(dox_targets GLOBAL PROPERTY DynamoRIO_dox_targets)
set_property(GLOBAL PROPERTY DynamoRIO_dox_targets ${dox_targets} ${doctgt})

add_custom_target(${doctgt} DEPENDS ${gendoc})
add_custom_command(
  OUTPUT ${gendoc}
  DEPENDS ${srcdoc}
  drcachesim_ops
  common/options.h
  COMMAND ${CMAKE_COMMAND}
  ARGS -D src=${srcdoc}
       -D dst=${gendoc}
       -D CMAKE_CROSSCOMPILING=${CMAKE_CROSSCOMPILING}
       -D prog=$<TARGET_FILE:drcachesim_ops>
       -P ${CMAKE_CURRENT_SOURCE_DIR}/../common/gendocs.cmake
  VERBATIM)

# propagate to parent dir
set(exported_targets_append "${exported_targets_append}" PARENT_SCOPE)