esphome:
  name: rotatry-21-new
  friendly_name: Rotatry_2.1_new
  platformio_options:
    build_flags: "-DBOARD_HAS_PSRAM"
    board_build.esp-idf.memory_type: qio_opi
    board_build.flash_mode: dio
  on_boot:
    priority: 800
    then:
      # Bring up panel power before toggling RESET, then small delays. Based on Elecrow sample code, though colors are off
      - output.turn_on: lcd_power
      - output.turn_on: display_reset
      - delay: 100ms
      - output.turn_off: display_reset
      - delay: 100ms
      - output.turn_on: tp_reset
      - delay: 100ms
      - output.turn_off: tp_reset
      - delay: 120ms
      - output.turn_on: tp_reset
      - delay: 120ms
      - output.turn_on: tp_intr 

esp32:
  board: esp32-s3-devkitc-1
  framework:
    type: esp-idf
    sdkconfig_options:
      CONFIG_ESP32S3_DEFAULT_CPU_FREQ_240: y
      CONFIG_ESP32S3_DATA_CACHE_64KB: y
      CONFIG_SPIRAM_FETCH_INSTRUCTIONS: y
      CONFIG_SPIRAM_RODATA: y

psram:
  mode: octal
  speed: 80MHz 

# Enable logging
logger:
  level: DEBUG 

debug:
  update_interval: 30s

# Enable Home Assistant API
api:
  encryption:
    key: "iF6o2ZixwnSuJXpRxwkc+O9RmT7k1nW0os5/qu8fFU0="

ota:
  - platform: esphome
    password: "ea7d5864d1e61fcf017b2c0588e9d2a6"

mdns:
  disabled: false

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "Rotatry-21-New Fallback Hotspot"
    password: "5FgIv0bcISGs"

external_components:
  - source: github://sEbola76/Makerfabs
    components: [ cst826 ]

captive_portal:
  
i2c:
  sda: GPIO38
  scl: GPIO39
  id: bus_a
  scan: true

pcf8574:
  - id: pcf
    address: 0x21
    

# Map PCF8574 pins:
# P0: Touch reset (output)
# P2: Touch interrupt (input)
# P3: LCD power (output)
# P4: LCD reset (output)
# P5: Encoder button (input pull-up)
# (P1, P6, P7 unused here)
output:
  - platform: ledc
    pin: 6
    id: bl_pwm
    frequency: 19531Hz
  - platform: gpio
    id: lcd_power
    pin:
      pcf8574: pcf
      number: 3
      mode:
        output: true
      inverted: false
  - platform: gpio
    id: tp_reset
    pin:
      pcf8574: pcf
      number: 0
      mode:
        output: true
  - platform: gpio
    id: display_reset
    pin:
      pcf8574: pcf
      number: 4
      mode:
        output: true
      inverted: true
  - platform: gpio
    id: tp_intr
    pin:
      pcf8574: pcf
      number: 2
      mode:
        output: true
  - platform: gpio
    id: encode_button
    pin:
      pcf8574: pcf
      number: 5
      mode:
        input: true

sensor:
  - platform: rotary_encoder
    id: knob
    name: "Encoder"
    pin_a:
      number: 42
      mode:
        input: true
        pullup: true
    pin_b:
      number: 4
      mode:
        input: true
        pullup: true
    resolution: 1
    min_value: -100000
    max_value:  100000


light:
  - platform: monochromatic
    name: "LCD Backlight"
    output: bl_pwm
    id: display_backlight
    default_transition_length: 0s
    restore_mode: ALWAYS_ON

color:
  - id: my_red
    red: 100%
    green: 0%
    blue: 0%

spi:
  clk_pin: 2
  mosi_pin: 1

font:
  - file: "gfonts://Roboto"
    id: roboto16
    size: 16

# GT911 Touchscreen Controller
touchscreen:
  platform: cst826
  id: my_touchscreen
  i2c_id: bus_a
  skip_probe: True
  update_interval: 25ms
  address: 0x15
  on_touch:
    - logger.log:
        format: Touch at (%d, %d)
        args: [touch.x, touch.y]
    - lambda: |-
        ESP_LOGI("cal", "x=%d, y=%d, x_raw=%d, y_raw=%0d",
            touch.x,
            touch.y,
            touch.x_raw,
            touch.y_raw
            );

display:
  - platform: st7701s
    id: my_display
    update_interval: 50ms

    spi_mode: MODE3
    color_order: RGB
    invert_colors: false

    dimensions:
      width: 480
      height: 480

    #reset_pin:
    #  pcf8574: pcf
    #  number: 4

    cs_pin: 16
    de_pin: 40
    hsync_pin: 15
    vsync_pin: 7
    pclk_pin: 41
    data_pins:
      red: [46, 3, 8, 18, 17]
      green: [14, 13, 12, 11, 10, 9]
      blue: [5, 45, 48, 47, 21]

    hsync_front_porch: 20
    hsync_pulse_width: 10
    hsync_back_porch: 10
    vsync_front_porch: 8
    vsync_pulse_width: 10
    vsync_back_porch: 10
    show_test_card: true

    pclk_frequency: 18MHz
    pclk_inverted: true

    # https://github.com/moononournation/Arduino_GFX/blob/365a70bbca253966c6b89fcb649f11d52e6dbb9d/src/display/Arduino_RGB_Display.cpp
    init_sequence:
      - [0x01]
      - [0xFF, 0x77, 0x01, 0x00, 0x00, 0x10]  
      
      - [0xCC, 0x10]
      - [0xCD, 0x08]

      - [0xB0, 0x02, 0x13, 0x1B, 0x0D, 0x10, 0x05, 0x08, 0x07, 0x07, 0x24, 0x04, 0x11, 0x0E, 0x2C, 0x33, 0x1D]
      - [0xB1, 0x05, 0x13, 0x1B, 0x0D, 0x11, 0x05, 0x08, 0x07, 0x07, 0x24, 0x04, 0x11, 0x0E, 0x2C, 0x33, 0x1D]

      - [0xFF, 0x77, 0x01, 0x00, 0x00, 0x11]

      - [0xB0, 0x5D]
      - [0xB1, 0x43]
      - [0xB2, 0x81]
      - [0xB3, 0x80]

      - [0xB5, 0x43]

      - [0xB7, 0x85]
      - [0xB8, 0x20]

      - [0xC1, 0x78]
      - [0xC2, 0x78]

      - [0xD0, 0x88]

      - [0xE0, 0x00, 0x00, 0x02]

      - [0xE1, 0x03, 0xA0, 0x00, 0x00, 0x04, 0xA0, 0x00, 0x00, 0x00, 0x20, 0x20]

      - [0xE2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00]

      - [0xE3, 0x00, 0x00, 0x11, 0x00]

      - [0xE4, 0x22, 0x00]

      - [0xE5, 0x05, 0xEC, 0xA0, 0xA0, 0x07, 0xEE, 0xA0, 0xA0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00]

      - [0xE6, 0x00, 0x00, 0x11, 0x00]

      - [0xE7, 0x22, 0x00]

      - [0xE8, 0x06, 0xED, 0xA0, 0xA0, 0x08, 0xEF, 0xA0, 0xA0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00]

      - [0xEB, 0x00, 0x00, 0x40, 0x40, 0x00, 0x00, 0x00]

      - [0xED, 0xFF, 0xFF, 0xFF, 0xBA, 0x0A, 0xBF, 0x45, 0xFF, 0xFF, 0x54, 0xFB, 0xA0, 0xAB, 0xFF, 0xFF, 0xFF]

      - [0xEF, 0x10, 0x0D, 0x04, 0x08, 0x3F, 0x1F]

      - [0xFF, 0x77, 0x01, 0x00, 0x00, 0x13]
      - [0xEF, 0x08]

      - [0xFF, 0x77, 0x01, 0x00, 0x00, 0x00]

      - [0x36, 0x00]
      - [0x3A, 0x60]  # 0x70=RGB888, 0x60=RGB666, 0x50=RGB565

      - [0x11]
      - delay 100ms

      - [0x29]
      - delay 50ms

lvgl:
  displays:
    - my_display
  touchscreens:
    - my_touchscreen
  widgets:
    - label:
        align: CENTER
        id: lbl_title
        text_font: montserrat_28
        text: "HelloWorld"