Ultrafeeder ghcr.io/sdr-enthusiasts/docker-adsb-ultrafeeder:latest https://github.com/sdr-enthusiasts/docker-adsb-ultrafeeder/pkgs/container/docker-adsb-ultrafeeder bridge bash false https://github.com/Eurotimmy/unraid-templates/blob/main/Ultrafeeder/README.md https://forums.unraid.net/topic/201305-support-eurotimmy-ultrafeeder-ads-b/ https://github.com/sdr-enthusiasts/docker-adsb-ultrafeeder False adsb ads-b readsb tar1090 graphs1090 dump1090 rtl-sdr rtlsdr sdr flightradar24 fr24 flightaware piaware adsbexchange adsb.fi airplanes.live mlat aircraft plane tracker radar bias-tee lna 1090 Ultrafeeder is the SDR-Enthusiasts all-in-one ADS-B container: it decodes 1090 MHz aircraft signals from an RTL-SDR dongle with readsb, shows them on a live tar1090 map, graphs your reception with graphs1090, and can feed many aggregators (adsb.fi, airplanes.live, ADSBExchange and others) with MLAT. It also works as a "receiver" for other feeder containers. For example, the FR24/FlightAware all-in-one containers can take their data from Ultrafeeder's Beast output (port 30005) instead of opening the dongle themselves. :: QUICK START :: 1. Plug in your RTL-SDR dongle. Make sure no other container (dump1090, fr24feed-piaware, etc.) is using it. 2. Set your receiver latitude, longitude and altitude (metres, e.g. 18m). 3. Start the container and open the WebUI. Aircraft should appear within a minute. :: POWERING AN LNA (BIAS-TEE) :: If you use a bias-tee powered LNA/filter with an RTL-SDR Blog V3/V4, set "Enable Bias-Tee" to true AND put --enable-biastee in "Extra readsb Arguments". The second setting makes readsb keep the bias-tee on after it opens the dongle; some decoders reset it, which leaves the LNA unpowered and blocking signal. :: GAIN :: "auto" uses readsb's built-in auto-gain (recommended by SDR-Enthusiasts). You can also set a fixed value in dB, e.g. 40.2. :: FEEDING AGGREGATORS :: Use ULTRAFEEDER_CONFIG to add feeds, e.g. adsb,feed.adsb.fi,30004,beast_reduce_plus_out;mlat,feed.adsb.fi,31090 and set UUID (generate one with: cat /proc/sys/kernel/random/uuid). See the project README for the full list. This is a community template. It is not affiliated with SDR-Enthusiasts. Please report template problems via the Support link. Tools: HomeAutomation: Other: http://[IP]:[PORT:80]/ https://raw.githubusercontent.com/Eurotimmy/unraid-templates/main/Ultrafeeder/ultrafeeder.xml https://raw.githubusercontent.com/Eurotimmy/unraid-templates/main/Ultrafeeder/ultrafeeder.png --device-cgroup-rule='c 189:* rwm' --tmpfs /run:exec,size=256M --tmpfs /tmp:size=128M --tmpfs /var/log:size=32M An RTL-SDR (or other readsb-supported) receiver connected to the Unraid server. Only one container can use a given dongle at a time. 8080 30005 rtlsdr auto false 2 true true Ultrafeeder error /mnt/user/appdata/ultrafeeder/globe_history /mnt/user/appdata/ultrafeeder/graphs1090 /dev/bus/usb /proc/diskstats