#!/bin/bash ############################################################################# # FPP Install Script # # This is a quick and dirty script to take a stock OS build and install FPP # onto it for use in building FPP images or setting up a development system. # # The script will automatically setup the system for the development # version of FPP, the system can then be switched to a new version number # or git branch for release. # ############################################################################# # To use this script, download the latest copy from github and run it as # root on the system where you want to install FPP: # # curl -o ./FPP_Install.sh https://raw.githubusercontent.com/FalconChristmas/fpp/master/SD/FPP_Install.sh # chmod 700 ./FPP_Install.sh # su # ./FPP_Install.sh # ############################################################################# # NOTE: This script is used to build the SD images for FPP releases. Its # main goal is to prep these release images. It may be used for othe # purposes, but it is not our main priority to keep FPP working on # other Linux distributions or distribution versions other than those # we base our FPP releases on. Currently, FPP images are based on the # latest OS images for the Raspberry Pi and BeagleBone Black. See # appropriate README for the exact image that is used. # # Raspberry Pi # - Login/Password # - pi/raspberry # # BeagleBone Black # - Login/Password # - debian/temppwd # # Other OS images may work with this install script and FPP on the # Pi and BBB platforms, but these are the images we are currently # targetting for support. # ############################################################################# # Other platforms which may be functioning: # # NOTE: FPP Development is based on the latest Debian Bullseye images, so # hardware which does not support Bullseye may have issues. # ############################################################################# FPPBRANCH=${FPPBRANCH:-"master"} FPPIMAGEVER="2024-04" FPPCFGVER="86" FPPPLATFORM="UNKNOWN" FPPDIR=/opt/fpp FPPUSER=fpp FPPHOME=/home/${FPPUSER} OSVER="UNKNOWN" # Make sure the sbin directories are on the path as we will # need the adduser/addgroup/ldconfig/a2enmod/etc... commands PATH=$PATH:/usr/sbin:/sbin # CPU Count CPUS=$(grep "^processor" /proc/cpuinfo | wc -l) if [[ ${CPUS} -gt 1 ]]; then MEMORY=$(grep MemTot /proc/meminfo | awk '{print $2}') if [[ ${MEMORY} -lt 425000 ]]; then # very limited memory, only use one core or we'll fail or # will be very slow as we constantly swap in/out CPUS=1 elif [[ ${MEMORY} -lt 512000 ]]; then SWAPTOTAL=$(grep SwapTotal /proc/meminfo | awk '{print $2}') # Limited memory, if we have some swap, we'll go ahead with -j 2 # otherwise we'll need to stick with -j 1 or we run out of memory if [[ ${SWAPTOTAL} -gt 49000 ]]; then CPUS=2 else CPUS=1 fi fi fi ############################################################################# # Some Helper Functions ############################################################################# # Check local time against U.S. Naval Observatory time, set if too far out. # This function was copied from /opt/fpp/scripts/functions in FPP source # since we don't have access to the source until we clone the repo. checkTimeAgainstUSNO () { # www.usno.navy.mil is not pingable, so check github.com instead ping -q -c 1 github.com > /dev/null 2>&1 if [ $? -eq 0 ] then echo "FPP: Checking local time against U.S. Naval Observatory" # allow clocks to differ by 24 hours to handle time zone differences THRESHOLD=86400 USNODATE=$(curl -I --connect-timeout 10 --max-time 10 --retry 2 --retry-max-time 10 -f -v --silent https://nist.time.gov/ 2>&1 \ | grep '< Date' | sed -e 's/< Date: //') if [ "x${USNODATE}" != "x" ] then USNOSECS=$(date -d "${USNODATE}" +%s) else USNOSECS="" fi if [ "x${USNOSECS}" != "x" ] then LOCALSECS=$(date +%s) MINALLOW=$(expr ${USNOSECS} - ${THRESHOLD}) MAXALLOW=$(expr ${USNOSECS} + ${THRESHOLD}) #echo "FPP: USNO Secs : ${USNOSECS}" #echo "FPP: Local Secs : ${LOCALSECS}" #echo "FPP: Min Valid : ${MINALLOW}" #echo "FPP: Max Valid : ${MAXALLOW}" echo "FPP: USNO Time : $(date --date=@${USNOSECS})" echo "FPP: Local Time : $(date --date=@${LOCALSECS})" if [ ${LOCALSECS} -gt ${MAXALLOW} -o ${LOCALSECS} -lt ${MINALLOW} ] then echo "FPP: Local Time is not within 24 hours of USNO time, setting to USNO time" date $(date --date="@${USNOSECS}" +%m%d%H%M%Y.%S) LOCALSECS=$(date +%s) echo "FPP: New Local Time: $(date --date=@${LOCALSECS})" else echo "FPP: Local Time is OK" fi else echo "FPP: Incorrect result or timeout from query to U.S. Naval Observatory" fi else echo "FPP: Not online, unable to check time against U.S. Naval Observatory." fi } ############################################################################# # Gather some info about our system . /etc/os-release OSID=${ID} OSVER="${ID}_${VERSION_ID}" if [ "x${PRETTY_NAME}" = "x" ] then echo "ERROR: /etc/os-release does not exist, will not install" exit fi if [ "x${OSID}" = "x" ] then echo "ERROR: /etc/os-release does not contain OS ID, will not install" exit fi # Parse build options as arguments clone_fpp=true build_vlc=false skip_apt_install=false desktop=true isimage=false; MODEL="" if [ -f /proc/device-tree/model ]; then MODEL=$(tr -d '\0' < /proc/device-tree/model) fi # Attempt to detect the platform we are installing on if [ "x${OSID}" = "xraspbian" ] then FPPPLATFORM="Raspberry Pi" OSVER="debian_${VERSION_ID}" isimage=true desktop=false elif [ -e "/sys/class/leds/beaglebone:green:usr0" ] then FPPPLATFORM="BeagleBone Black" isimage=true desktop=false elif [ -f "/etc/armbian-release" ] then FPPPLATFORM="Armbian" isimage=true desktop=false elif [[ $PRETTY_NAME == *"Armbian"* ]] then FPPPLATFORM="Armbian" isimage=true desktop=false elif [ "x${OSID}" = "xdebian" ] then FPPPLATFORM="Debian" elif [ "x${OSID}" = "xubuntu" ] then FPPPLATFORM="Ubuntu" elif [ "x${OSID}" = "xlinuxmint" ] then FPPPLATFORM="Mint" elif [ "x${OSID}" = "xfedora" ] then FPPPLATFORM="Fedora" else FPPPLATFORM="UNKNOWN" fi while [ -n "$1" ]; do case $1 in --skip-clone) clone_fpp=false shift ;; --skip-vlc) build_vlc=false shift ;; --build-vlc) build_vlc=true shift ;; --skip-apt-install) skip_apt_install=true shift ;; --img) desktop=false isimage=true shift ;; --no-img) desktop=true isimage=false shift ;; --branch) FPPBRANCH=$2 shift shift ;; *) echo "Unknown option $1" >&2 exit 1 ;; esac done checkTimeAgainstUSNO ############################################################################# echo "============================================================" echo "FPP Image Version: v${FPPIMAGEVER}" echo "FPP Directory : ${FPPDIR}" echo "FPP Branch : ${FPPBRANCH}" echo "Operating System : ${PRETTY_NAME}" echo "Platform : ${FPPPLATFORM}" echo "OS Version : ${OSVER}" echo "OS ID : ${OSID}" echo "Image : ${isimage}" echo "============================================================" ############################################################################# echo "" echo "Notes:" echo "- Does this system have internet access to install packages and FPP?" echo "" echo "WARNINGS:" echo "- This install expects to be run on a clean freshly-installed system." echo " The script is not currently designed to be re-run multiple times." if $isimage; then echo "- This installer will take over your system. It will disable any" echo " existing 'pi' or 'debian' user and create a '${FPPUSER}' user. If the system" echo " has an empty root password, remote root login will be disabled." fi echo "" echo -n "Do you wish to proceed? [N/y] " read ANSWER if [ "x${ANSWER}" != "xY" -a "x${ANSWER}" != "xy" ] then echo echo "Install cancelled." echo exit fi STARTTIME=$(date) ####################################### # Log output and notify user echo "ALL output will be copied to FPP_Install.log" exec > >(tee -a FPP_Install.log) exec 2>&1 echo "========================================================================" echo "FPP_Install.sh started at ${STARTTIME}" echo "------------------------------------------------------------------------" ####################################### # Remove old /etc/fpp if it exists if [ -e "/etc/fpp" ] then echo "FPP - Removing old /etc/fpp" rm -rf /etc/fpp fi ####################################### # Create /etc/fpp directory and contents echo "FPP - Creating /etc/fpp and contents" mkdir /etc/fpp echo "${FPPPLATFORM}" > /etc/fpp/platform echo "v${FPPIMAGEVER}" > /etc/fpp/rfs_version echo "${FPPCFGVER}" > /etc/fpp/config_version if $desktop; then echo "1" > /etc/fpp/desktop else # Bunch of configuration we wont do if installing onto desktop # We shouldn't set the hostname or muck with the issue files, keyboard, etc... ####################################### # Setting hostname echo "FPP - Setting hostname" echo "FPP" > /etc/hostname hostname FPP ####################################### # Add FPP hostname entry echo "FPP - Adding 'FPP' hostname entry" # Remove any existing 127.0.1.1 entry first sed -i -e "/^127.0.1.1[^0-9]/d" /etc/hosts echo "127.0.1.1 FPP" >> /etc/hosts ####################################### # Update /etc/issue and /etc/issue.net echo "FPP - Updating /etc/issue*" head -1 /etc/issue.net > /etc/issue.new cat >> /etc/issue.new < /etc/issue.new cat >> /etc/issue.new < /etc/default/locale # end of if desktop fi ####################################### # Make sure /opt exists echo "FPP - Checking for existence of /opt" cd /opt 2> /dev/null || mkdir /opt ####################################### # Make sure dependencies are installed # Set noninteractive install to skip prompt about restarting services export DEBIAN_FRONTEND=noninteractive case "${OSVER}" in debian_11 | debian_12 | ubuntu_22.04 | ubuntu_22.10 | linuxmint_21) case $FPPPLATFORM in 'BeagleBone Black') echo "FPP - Skipping non-free for $FPPPLATFORM" ;; *) echo "FPP - Enabling non-free repo" sed -i -e "s/Components: main/Components: main contrib non-free non-free-firmware/" /etc/apt/sources.list.d/debian.sources #sed -i -e "s/^deb \(.*\)/deb \1 non-free/" /etc/apt/sources.list #sed -i -e "s/non-free\(.*\)non-free/non-free\1/" /etc/apt/sources.list ;; esac #remove a bunch of packages that aren't neeeded, free's up space PACKAGE_REMOVE="nginx nginx-full nginx-common python3-numpy python3-opencv python3-pip python3-pkg-resources python3-scipy python3-setuptools triggerhappy pocketsphinx-en-us python3-smbus guile-2.2-libs \ python3-werkzeug python3-click python3-colorama python3-decorator python3-dev python3-distro \ python3-flask python3-itsdangerous python3-jinja2 python3-lib2to3 python3-libgpiod python3-markupsafe \ gfortran glib-networking libxmuu1 xauth network-manager dhcpcd5 fake-hwclock ifupdown isc-dhcp-client isc-dhcp-common openresolv iwd" if [ "$FPPPLATFORM" == "BeagleBone Black" ]; then PACKAGE_REMOVE="$PACKAGE_REMOVE nodejs bb-node-red-installer mender-client" fi if $desktop; then #don't remove anything from a desktop PACKAGE_REMOVE="" fi if $skip_apt_install; then PACKAGE_REMOVE="" fi if [ "x${PACKAGE_REMOVE}" != "x" ]; then # Need to make sure there is configuration for eth0 or uninstalling dhcpclient will cause network to drop rm -f /etc/systemd/network/50-default.network curl -o /etc/systemd/network/50-default.network https://raw.githubusercontent.com/FalconChristmas/fpp/master/etc/systemd/network/50-default.network if [ "${OSVER}" == "debian_12" ]; then sed -i -e 's/LinkLocalAddressing=fallback/LinkLocalAddressing=yes/' /etc/systemd/network/50-default.network fi apt-get install -y systemd-resolved systemctl reload systemd-networkd apt-get remove -y --purge --autoremove --allow-change-held-packages ${PACKAGE_REMOVE} systemctl unmask systemd-networkd systemctl unmask systemd-resolved systemctl restart systemd-networkd systemctl restart systemd-resolved systemctl enable systemd-networkd systemctl enable systemd-resolved echo "FPP - Sleeping 5 seconds to make sure network is available" sleep 5 fi echo "FPP - Removing anything left that wasn't explicity removed" apt-get -y --purge autoremove echo "FPP - Updating package list" apt-get update echo "FPP - Upgrading apt if necessary" apt-get install --only-upgrade apt echo "FPP - Sleeping 5 seconds to make sure any apt upgrade is quiesced" sleep 5 echo "FPP - Upgrading other installed packages" apt-get -y upgrade echo "FPP - Cleanup caches" apt-get -y clean apt-get -y --purge autoremove apt-get -y clean # remove gnome keyring module config which causes pkcs11 warnings # when trying to do a git pull rm -f /etc/pkcs11/modules/gnome-keyring-module echo "FPP - Installing required packages" # Install 10 packages, then clean to lower total disk space required PHPVER="" ACTUAL_PHPVER="7.4" if [ "${OSVER}" == "ubuntu_22.04" -o "${OSVER}" == "linuxmint_21" ]; then PHPVER="7.4" echo "FPP - Forcing PHP 7.4" apt install software-properties-common apt-transport-https -y add-apt-repository ppa:ondrej/php -y apt-get -y update apt-get -y upgrade fi if [ "${OSVER}" == "ubuntu_22.10" ]; then ACTUAL_PHPVER="8.1" fi if [ "${OSVER}" == "debian_12" ]; then ACTUAL_PHPVER="8.2" PHPVER="8.2" fi PACKAGE_LIST="alsa-utils arping avahi-daemon avahi-utils locales nano net-tools \ apache2 apache2-bin apache2-data apache2-utils \ bc bash-completion btrfs-progs exfat-fuse lsof ethtool curl zip unzip bzip2 wireless-tools dos2unix \ fbi fbset file flite ca-certificates lshw gettext wget \ build-essential ffmpeg gcc g++ gdb vim vim-common bison flex device-tree-compiler dh-autoreconf \ git git-core hdparm i2c-tools ifplugd jq less sysstat tcpdump time usbutils usb-modeswitch \ samba rsync sudo shellinabox dnsmasq hostapd vsftpd ntp sqlite3 at haveged samba samba-common-bin \ mp3info exim4 mailutils dhcp-helper parprouted bridge-utils libiio-utils \ php${PHPVER} php${PHPVER}-cli php${PHPVER}-fpm php${PHPVER}-common php${PHPVER}-curl php-pear \ php${PHPVER}-bcmath php${PHPVER}-sqlite3 php${PHPVER}-zip php${PHPVER}-xml \ libavcodec-dev libavformat-dev libswresample-dev libswscale-dev libavdevice-dev libavfilter-dev libtag1-dev \ vorbis-tools libgraphicsmagick++1-dev graphicsmagick-libmagick-dev-compat libmicrohttpd-dev \ gettext apt-utils x265 libtheora-dev libvorbis-dev libx265-dev iputils-ping mp3gain \ libmosquitto-dev mosquitto-clients mosquitto libzstd-dev lzma zstd gpiod libgpiod-dev libjsoncpp-dev libcurl4-openssl-dev \ fonts-freefont-ttf flex bison pkg-config libasound2-dev mesa-common-dev qrencode libusb-1.0-0-dev \ flex bison pkg-config libasound2-dev python3-distutils libssl-dev libtool bsdextrautils iw rsyslog tzdata" if [ "$FPPPLATFORM" == "Raspberry Pi" -o "$FPPPLATFORM" == "BeagleBone Black" ]; then PACKAGE_LIST="$PACKAGE_LIST firmware-realtek firmware-atheros firmware-ralink firmware-brcm80211 firmware-iwlwifi firmware-libertas firmware-zd1211 firmware-ti-connectivity zram-tools" if [ "${OSVER}" == "debian_12" ]; then PACKAGE_LIST="$PACKAGE_LIST ccache" fi else PACKAGE_LIST="$PACKAGE_LIST ccache" fi if [ "$FPPPLATFORM" != "BeagleBone Black" ]; then PACKAGE_LIST="$PACKAGE_LIST libva-dev smartmontools" fi if $isimage; then PACKAGE_LIST="$PACKAGE_LIST networkd-dispatcher systemd-resolved" fi if ! $build_vlc; then PACKAGE_LIST="$PACKAGE_LIST vlc libvlc-dev" fi if $skip_apt_install; then PACKAGE_LIST="" else apt-get -y -o Dpkg::Options::="--force-confdef" -o Dpkg::Options::="--force-confold" install ${PACKAGE_LIST} fi if $isimage; then if [ "${OSVER}" == "debian_12" ]; then apt-get -y -o Dpkg::Options::="--force-confdef" -o Dpkg::Options::="--force-confold" install systemd wpasupplicant elif [ "$FPPPLATFORM" == "BeagleBone Black" ]; then # Since we rely heavily on systemd-networkd and wpasupplicant for networking features, grab the latest backports # This cannot work on Raspberry Pi as the Pi Zero and older Pi's are armv6 and bullseye-backports is armv7 apt-get -y -o Dpkg::Options::="--force-confdef" -o Dpkg::Options::="--force-confold" -t bullseye-backports install systemd wpasupplicant else apt-get -y -o Dpkg::Options::="--force-confdef" -o Dpkg::Options::="--force-confold" install systemd wpasupplicant fi fi echo "FPP - Cleaning up after installing packages" apt-get -y clean echo "FPP - Installing libhttpserver 0.19.0" (cd /opt/ && git clone https://github.com/etr/libhttpserver && cd libhttpserver && git checkout 0.19.0 && ./bootstrap && autoupdate && ./bootstrap && mkdir build && cd build && ../configure --prefix=/usr --disable-examples && make -j ${CPUS} && make install && cd /opt/ && rm -rf /opt/libhttpserver) echo "FPP - Configuring shellinabox to use /var/tmp" echo "SHELLINABOX_DATADIR=/var/tmp/" >> /etc/default/shellinabox sed -i -e "s/SHELLINABOX_ARGS.*/SHELLINABOX_ARGS=\"--no-beep -t\"/" /etc/default/shellinabox if [ -f /bin/systemctl ] then echo "FPP - Disabling unneeded/unwanted services" systemctl disable bonescript.socket systemctl disable bonescript-autorun.service systemctl disable console-kit-daemon.service systemctl disable cloud9.socket systemctl disable beagle-flasher-init-shutdown.service fi if $isimage; then echo "FPP - Disabling GUI" systemctl disable gdm systemctl disable gdm3 systemctl disable lightdm systemctl disable wdm systemctl disable xdm systemctl disable display-manager.service echo "FPP - Disabling dhcp-helper and hostapd from automatically starting" systemctl disable dhcp-helper systemctl disable hostapd echo "FPP - Enabling systemd-networkd" # clean out the links to /dev/null so that we can enable systemd-networkd rm -f /etc/systemd/network/99* rm -f /etc/systemd/network/20* rm -f /etc/systemd/network/73* rm -f /etc/systemd/network/eth* rm -f /etc/systemd/network/wlan* rm -f /etc/systemd/network/SoftAp* rm -rf /etc/wpa_supplicant/wpa_supplicant-wl* if [ ! -f /etc/systemd/network/50-default.network ]; then # Need to make sure there is configuration for eth0 or no connection will be # setup after a reboot curl -o /etc/systemd/network/50-default.network https://raw.githubusercontent.com/FalconChristmas/fpp/master/etc/systemd/network/50-default.network fi # make sure we end up with eth0/wlan0 instead of enx#### wlx#### naming for now ln -s /dev/null /etc/systemd/network/99-default.link ln -s /dev/null /etc/systemd/network/73-usb-net-by-mac.link systemctl enable systemd-networkd systemctl disable systemd-networkd-wait-online.service systemctl enable systemd-resolved systemctl enable networkd-dispatcher # if systemd hasn't created a new resolv.conf, don't replace it yet if [ -f /run/systemd/resolve/resolv.conf ]; then rm -f /etc/resolv.conf ln -s /run/systemd/resolve/resolv.conf /etc/resolv.conf fi #remove some things that were installed (not sure why) apt-get remove -y --purge --autoremove --allow-change-held-packages pocketsphinx-en-us if [ "$FPPPLATFORM" == "Raspberry Pi" ]; then echo "FPP - Fixing haveged" mkdir -p /etc/systemd/system/haveged.service.d echo -e '[Service]\nSystemCallFilter=uname' > /etc/systemd/system/haveged.service.d/syscall.conf echo "FPP - Applying updates to allow optional boot from USB on Pi 4 (and up)" # make sure the label on p1 is "boot" and p2 is rootfs fatlabel /dev/mmcblk0p1 boot e2label /dev/mmcblk0p2 rootfs BOOTDIR="/boot" if [ "${OSVER}" == "debian_12" ]; then BOOTDIR="/boot/firmware" fi # Update /etc/fstab to use PARTUUID for / and /boot BOOTLINE=$(grep "^[^#].* /boot[a-z/]* " /etc/fstab | sed -e "s;^[^#].* /boot[a-z/]* ;LABEL=boot ${BOOTDIR} ;") ROOTLINE=$(grep "^[^#].* / " /etc/fstab | sed -e "s;^[^#].* / ;LABEL=rootfs / ;") echo " - Updating /etc/fstab" sed -i -e "s;^[^#].* /boot[a-z/]* .*;${BOOTLINE};" -e "s;^[^#].* / .*;${ROOTLINE};" /etc/fstab # Create two different cmdline.txt files for USB and SD boot echo " - Creating ${BOOTDIR}/cmdline.* configs" sed -i -e "s; root=PARTUUID=[0-9A-Za-z\-]* ; root=/dev/mmcblk0p2 ;g" ${BOOTDIR}/cmdline.txt cat ${BOOTDIR}/cmdline.txt | sed -e "s/root=\/dev\/[a-zA-Z0-9]*\([0-9]\) /root=\/dev\/sda\1 /" > ${BOOTDIR}/cmdline.usb cat ${BOOTDIR}/cmdline.txt | sed -e "s/root=\/dev\/[a-zA-Z0-9]*\([0-9]\) /root=\/dev\/mmcblk0p\1 /" > ${BOOTDIR}/cmdline.sd # Create two batch files to switch back and forth between USB and SD boot echo " - Creating ${BOOTDIR}/boot_*.bat scripts" cat > ${BOOTDIR}/boot_usb.bat < ${BOOTDIR}/boot_sd.bat < /etc/modprobe.d/blacklist-gyro.conf echo "blacklist st_pressure_i2c" >> /etc/modprobe.d/blacklist-gyro.conf echo "blacklist st_pressure" >> /etc/modprobe.d/blacklist-gyro.conf echo "blacklist inv_mpu6050_i2c" >> /etc/modprobe.d/blacklist-gyro.conf echo "blacklist st_sensors_spi" >> /etc/modprobe.d/blacklist-gyro.conf echo "blacklist st_sensors_i2c" >> /etc/modprobe.d/blacklist-gyro.conf echo "blacklist inv_mpu6050" >> /etc/modprobe.d/blacklist-gyro.conf echo "blacklist st_sensors" >> /etc/modprobe.d/blacklist-gyro.conf echo "blacklist spidev" > /etc/modprobe.d/blacklist-spidev.conf # need to blacklist the bluetooth on BBG Gateway or it tends to crash the kernel, we don't need it echo "blacklist btusb" > /etc/modprobe.d/blacklist-bluetooth.conf echo "blacklist bluetooth" >> /etc/modprobe.d/blacklist-bluetooth.conf echo "blacklist hci_uart" >> /etc/modprobe.d/blacklist-bluetooth.conf echo "blacklist bnep" >> /etc/modprobe.d/blacklist-bluetooth.conf rm -f /etc/modules-load.d/network.conf systemctl disable keyboard-setup systemctl disable unattended-upgrades systemctl disable resize_filesystem ;; 'Raspberry Pi') echo "FPP - Updating firmware for Raspberry Pi install" sudo apt-get dist-upgrade -y echo "FPP - Installing Pi-specific packages" apt-get -y install raspi-config if $isimage; then BOOTDIR="/boot" if [ "${OSVER}" == "debian_12" ]; then BOOTDIR="/boot/firmware" fi echo "FPP - Disabling stock users (pi, odroid, debian), use the '${FPPUSER}' user instead" sed -i -e "s/^pi:.*/pi:*:16372:0:99999:7:::/" /etc/shadow sed -i -e "s/^odroid:.*/odroid:*:16372:0:99999:7:::/" /etc/shadow sed -i -e "s/^debian:.*/debian:*:16372:0:99999:7:::/" /etc/shadow echo "FPP - Disabling the hdmi force hotplug setting" sed -i -e "s/hdmi_force_hotplug/#hdmi_force_hotplug/" ${BOOTDIR}/config.txt echo "FPP - Disabling Camera AutoDetect" sed -i -e "s/camera_auto_detect/#camera_auto_detect/" ${BOOTDIR}/config.txt echo "FPP - Adding required modules to modules-load to speed up boot" echo "i2c_dev" >> /etc/modules-load.d/modules.conf echo "spidev" >> /etc/modules-load.d/modules.conf echo "at24" >> /etc/modules-load.d/modules.conf echo "lm75" >> /etc/modules-load.d/modules.conf echo "snd_bcm2835" >> /etc/modules-load.d/modules.conf echo "bcm2835_codec" >> /etc/modules-load.d/modules.conf echo "snd_usb_audio" >> /etc/modules-load.d/modules.conf echo "[ALL]">> ${BOOTDIR}/config.txt echo "FPP - Enabling SPI in device tree" echo >> ${BOOTDIR}/config.txt echo "# Enable SPI in device tree" >> ${BOOTDIR}/config.txt echo "dtparam=spi=on" >> ${BOOTDIR}/config.txt echo >> ${BOOTDIR}/config.txt echo "# Enable PCIe for NVME storage" >> ${BOOTDIR}/config.txt echo "dtparam=pciex1_gen=3" >> ${BOOTDIR}/config.txt echo >> ${BOOTDIR}/config.txt echo "FPP - Updating SPI buffer size and enabling HDMI audio devices" sed -i 's/$/ spidev.bufsiz=102400 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_compat_alsa=1/' ${BOOTDIR}/cmdline.txt echo "FPP - Updating root partition device" sed -i 's/root=PARTUUID=[A-Fa-f0-9-]* /root=\/dev\/mmcblk0p2 /g' ${BOOTDIR}/cmdline.txt sed -i 's/PARTUUID=[A-Fa-f0-9]*-01/\/dev\/mmcblk0p1/g' /etc/fstab sed -i 's/PARTUUID=[A-Fa-f0-9]*-02/\/dev\/mmcblk0p2/g' /etc/fstab echo "FPP - Disabling fancy network interface names" sed -i -e 's/rootwait/rootwait net.ifnames=0 biosdevname=0/' ${BOOTDIR}/cmdline.txt echo "# Enable I2C in device tree" >> ${BOOTDIR}/config.txt echo "dtparam=i2c_arm=on,i2c_arm_baudrate=400000" >> ${BOOTDIR}/config.txt echo >> ${BOOTDIR}/config.txt echo "# Setting kernel scaling framebuffer method" >> ${BOOTDIR}/config.txt echo "scaling_kernel=8" >> ${BOOTDIR}/config.txt echo >> ${BOOTDIR}/config.txt echo "# Enable audio" >> ${BOOTDIR}/config.txt echo "dtparam=audio=on" >> ${BOOTDIR}/config.txt echo >> ${BOOTDIR}/config.txt echo "# Allow more current through USB" >> ${BOOTDIR}/config.txt echo "max_usb_current=1" >> ${BOOTDIR}/config.txt echo >> ${BOOTDIR}/config.txt echo "# Setup UART clock to allow DMX output" >> ${BOOTDIR}/config.txt echo "init_uart_clock=16000000" >> ${BOOTDIR}/config.txt echo >> ${BOOTDIR}/config.txt echo "# Swap Pi 3 and Zero W UARTs with BT" >> ${BOOTDIR}/config.txt echo "dtoverlay=miniuart-bt" >> ${BOOTDIR}/config.txt echo >> ${BOOTDIR}/config.txt echo "dtoverlay=dwc2" >> ${BOOTDIR}/config.txt echo >> ${BOOTDIR}/config.txt echo "# GPU memory set to 128 to deal with error in omxplayer with hi-def videos" >> ${BOOTDIR}/config.txt echo "[pi5]" >> ${BOOTDIR}/config.txt echo "gpu_mem=256" >> ${BOOTDIR}/config.txt echo "[pi4]" >> ${BOOTDIR}/config.txt echo "gpu_mem=256" >> ${BOOTDIR}/config.txt echo "[pi3]" >> ${BOOTDIR}/config.txt echo "gpu_mem=128" >> ${BOOTDIR}/config.txt echo "[pi0]" >> ${BOOTDIR}/config.txt echo "gpu_mem=64" >> ${BOOTDIR}/config.txt echo "[pi02]" >> ${BOOTDIR}/config.txt echo "gpu_mem=128" >> ${BOOTDIR}/config.txt echo "[pi1]" >> ${BOOTDIR}/config.txt echo "gpu_mem=64" >> ${BOOTDIR}/config.txt echo "[pi2]" >> ${BOOTDIR}/config.txt echo "gpu_mem=64" >> ${BOOTDIR}/config.txt echo "" >> /config.txt echo "[all]" >> /config.txt echo "" >> /config.txt echo "FPP - Freeing up more space by removing unnecessary packages" apt-get -y purge wolfram-engine sonic-pi minecraft-pi firmware-iwlwifi libglusterfs0 mesa-va-drivers mesa-vdpau-drivers mesa-vulkan-drivers mkvtoolnix ncurses-term poppler-data va-driver-all librados2 libcephfs2 apt-get -y --purge autoremove echo "FPP - Make things cleaner by removing configuration from unnecessary packages" dpkg --get-selections | grep deinstall | while read package deinstall; do apt-get -y purge $package done echo "FPP - Disabling Swap to save SD card" systemctl disable dphys-swapfile echo "FPP - Kernel doesn't support cgroups so remove to silence warnings on boot" update-rc.d -f cgroup-bin remove echo "FPP - Remove dhcpcd since we start DHCP interfaces on our own" update-rc.d -f dhcpcd remove echo "FPP - Setting locale" sed -i 's/^\(en_GB.UTF-8\)/# \1/;s/..\(en_US.UTF-8\)/\1/' /etc/locale.gen locale-gen en_US.UTF-8 dpkg-reconfigure --frontend=noninteractive locales export LANG=en_US.UTF-8 echo "FPP - Fix ifup/ifdown scripts for manual dns" sed -i -n 'H;${x;s/^\n//;s/esac\n/&\nif grep -qc "Generated by fpp" \/etc\/resolv.conf\; then\n\texit 0\nfi\n/;p}' /etc/network/if-up.d/000resolvconf sed -i -n 'H;${x;s/^\n//;s/esac\n/&\nif grep -qc "Generated by fpp" \/etc\/resolv.conf\; then\n\texit 0\nfi\n\n/;p}' /etc/network/if-down.d/resolvconf cat <<-EOF > /etc/dnsmasq.d/usb.conf interface=usb0 interface=usb1 port=53 dhcp-authoritative domain-needed bogus-priv expand-hosts cache-size=2048 dhcp-range=usb0,192.168.7.1,192.168.7.1,2m dhcp-range=usb1,192.168.6.1,192.168.6.1,2m listen-address=127.0.0.1 listen-address=192.168.7.2 listen-address=192.168.6.2 dhcp-option=usb0,3 dhcp-option=usb0,6 dhcp-option=usb1,3 dhcp-option=usb1,6 dhcp-leasefile=/var/run/dnsmasq.leases EOF sed -i -e "s/^IGNORE_RESOLVCONF.*/IGNORE_RESOLVCONF=yes/g" /etc/default/dnsmasq sed -i -e "s/#IGNORE_RESOLVCONF.*/IGNORE_RESOLVCONF=yes/g" /etc/default/dnsmasq echo "DNSMASQ_EXCEPT=lo" >> /etc/default/dnsmasq echo "FPP - Removing extraneous blacklisted modules" rm -f /etc/modprobe.d/blacklist-*8192cu.conf rm -f /etc/modprobe.d/blacklist-*8xxxu.conf fi echo "FPP - Disabling getty on onboard serial ttyAMA0" if [ "x${OSVER}" == "xdebian_11" ] || [ "x${OSVER}" == "xdebian_12" ]; then systemctl disable serial-getty@ttyAMA0.service sed -i -e "s/console=serial0,115200 //" ${BOOTDIR}/cmdline.txt sed -i -e "s/autologin pi/autologin ${FPPUSER}/" /etc/systemd/system/autologin@.service rm -f "/etc/systemd/system/getty@tty1.service.d/autologin.conf"; fi swapoff /var/swap rm -f /var/swap rfkill unblock all ;; #TODO 'Armbian') echo "FPP - Armbian" if $isimage; then apt-get remove -y network-manager sed -i -e "s/overlays=/overlays=i2c0 spi-spidev /" /boot/armbianEnv.txt echo "param_spidev_spi_bus=0" >> /boot/armbianEnv.txt echo "param_spidev_max_freq=25000000" >> /boot/armbianEnv.txt sed -i -e "s/ENABLED=true/ENABLED=false/" /etc/default/armbian-ramlog fi ;; 'Ubuntu') echo "FPP - Ubuntu" ;; 'Mint') echo "FPP - Mint" ;; 'Debian') echo "FPP - Debian" if $isimage; then apt-get remove -y network-manager if $ISARMBIAN; then sed -i -e "s/overlays=/overlays=i2c0 spi-spidev /" /boot/armbianEnv.txt echo "param_spidev_spi_bus=0" >> /boot/armbianEnv.txt echo "param_spidev_max_freq=25000000" >> /boot/armbianEnv.txt sed -i -e "s/ENABLED=true/ENABLED=false/" /etc/default/armbian-ramlog fi fi ;; *) echo "FPP - Unknown platform" ;; esac ####################################### # Clone git repository cd /opt if $clone_fpp; then ####################################### # Remove old /opt/fpp if it exists if [ -e "/opt/fpp" ] then echo "FPP - Removing old /opt/fpp" rm -rf /opt/fpp fi echo "FPP - Cloning git repository into /opt/fpp" git clone https://github.com/FalconChristmas/fpp fpp cd fpp git config pull.rebase true fi git config --global pull.rebase true git config --global --add safe.directory /opt/fpp ####################################### # Build VLC if $build_vlc; then echo "FPP - Building VLC" cd /opt/fpp/SD ./buildVLC.sh rm -rf /opt/vlc/ fi ####################################### # Switch to desired code branch echo "FPP - Switching git clone to ${FPPBRANCH} branch" cd /opt/fpp git checkout ${FPPBRANCH} if [ "$FPPPLATFORM" == "Raspberry Pi" ]; then # force grabbing these upfront as the make -j4 may fail to fetch them due to locks # while initializing git submodule update --init external/RF24 git submodule update --init external/rpi-rgb-led-matrix git submodule update --init external/rpi_ws281x git submodule update --init external/spixels cd /opt/fpp/src make gitsubmodules fi ####################################### # Upgrade the config if needed bash scripts/upgrade_config -notee ####################################### PHPDIR="/etc/php/7.4" if [ "${OSVER}" == "ubuntu_22.10" ]; then PHPDIR="/etc/php/8.1" fi if [ "${OSVER}" == "debian_12" ]; then PHPDIR="/etc/php/8.2" fi echo "FPP - Configuring PHP" FILES="cli/php.ini apache2/php.ini fpm/php.ini" for FILE in ${FILES} do if [ -f ${PHPDIR}/${FILE} ]; then sed -i -e "s/^short_open_tag.*/short_open_tag = On/" ${PHPDIR}/${FILE} sed -i -e "s/max_execution_time.*/max_execution_time = 1000/" ${PHPDIR}/${FILE} sed -i -e "s/max_input_time.*/max_input_time = 900/" ${PHPDIR}/${FILE} sed -i -e "s/default_socket_timeout.*/default_socket_timeout = 900/" ${PHPDIR}/${FILE} sed -i -e "s/post_max_size.*/post_max_size = 1999M/" ${PHPDIR}/${FILE} sed -i -e "s/upload_max_filesize.*/upload_max_filesize = 1999M/" ${PHPDIR}/${FILE} sed -i -e "s/;upload_tmp_dir =.*/upload_tmp_dir = \/home\/${FPPUSER}\/media\/upload/" ${PHPDIR}/${FILE} sed -i -e "s/^;max_input_vars.*/max_input_vars = 5000/" ${PHPDIR}/${FILE} sed -i -e "s/^output_buffering.*/output_buffering = 1024/" ${PHPDIR}/${FILE} fi done FILES="fpm/pool.d/www.conf" for FILE in ${FILES} do if [ -f ${PHPDIR}/${FILE} ]; then sed -i -e "s/^listen.owner .*/listen.owner = ${FPPUSER}/" ${PHPDIR}/${FILE} sed -i -e "s/^listen.group .*/listen.group = ${FPPUSER}/" ${PHPDIR}/${FILE} sed -i -e "s/^user\ .*/user = ${FPPUSER}/" ${PHPDIR}/${FILE} sed -i -e "s/^group\ .*/group = ${FPPUSER}/" ${PHPDIR}/${FILE} sed -i -e "s/^pm.max_children.*/pm.max_children = 25/" ${PHPDIR}/${FILE} sed -i -e "s/^pm.min_spare_servers.*/pm.min_spare_servers = 3/" ${PHPDIR}/${FILE} sed -i -e "s/^pm.max_spare_servers.*/pm.max_spare_servers = 6/" ${PHPDIR}/${FILE} sed -i -e "s/^pm.start_servers.*/pm.start_servers = 3/" ${PHPDIR}/${FILE} sed -i -e "s/^;pm.max_requests.*/pm.max_requests = 300/" ${PHPDIR}/${FILE} sed -i -e "s+^;clear_env.*+clear_env = no+g" ${PHPDIR}/${FILE} fi done if $isimage; then ####################################### echo "FPP - Copying rsync daemon config files into place" sed -e "s#FPPDIR#${FPPDIR}#g" -e "s#FPPHOME#${FPPHOME}#g" -e "s#FPPUSER#${FPPUSER}#g" < ${FPPDIR}/etc/rsync > /etc/default/rsync sed -e "s#FPPDIR#${FPPDIR}#g" -e "s#FPPHOME#${FPPHOME}#g" -e "s#FPPUSER#${FPPUSER}#g" < ${FPPDIR}/etc/rsyncd.conf > /etc/rsyncd.conf systemctl disable rsync fi ####################################### # Add the ${FPPUSER} user and group memberships echo "FPP - Adding ${FPPUSER} user" addgroup --gid 500 ${FPPUSER} adduser --uid 500 --home ${FPPHOME} --shell /bin/bash --ingroup ${FPPUSER} --gecos "Falcon Player" --disabled-password ${FPPUSER} adduser ${FPPUSER} adm adduser ${FPPUSER} sudo if compgen -G "/dev/gpiochip*" > /dev/null; then adduser ${FPPUSER} gpio fi if compgen -G "/dev/i2c*" > /dev/null; then adduser ${FPPUSER} i2c fi if compgen -G "/dev/spidev*" > /dev/null; then adduser ${FPPUSER} spi fi adduser ${FPPUSER} video adduser ${FPPUSER} audio # FIXME, use ${FPPUSER} here instead of hardcoding sed -i -e 's/^fpp:\*:/fpp:\$6\$rA953Jvd\$oOoLypAK8pAnRYgQQhcwl0jQs8y0zdx1Mh77f7EgKPFNk\/jGPlOiNQOtE.ZQXTK79Gfg.8e3VwtcCuwz2BOTR.:/' /etc/shadow if $isimage; then echo "FPP - Disabling any stock 'debian' user, use the '${FPPUSER}' user instead" sed -i -e "s/^debian:.*/debian:*:16372:0:99999:7:::/" /etc/shadow ####################################### echo "FPP - Fixing empty root passwd" sed -i -e 's/root::/root:*:/' /etc/shadow echo "FPP - Setting up ssh to disallow root login" sed -i -e "s/#PermitRootLogin .*/PermitRootLogin prohibit-password/" /etc/ssh/sshd_config sed -i -e "s/#\?Banner .*/Banner \/etc\/issue.net/g" /etc/ssh/sshd_config echo "FPP - Cleaning up /root/.cpanm to save space on the SD image" rm -rf /root/.cpanm echo "FPP - Enabling legacy WiFi drivers" sed -i -e "s@^ExecStart.*@ExecStart=/sbin/wpa_supplicant -c/etc/wpa_supplicant/wpa_supplicant-%I.conf -Dnl80211,wext -i%I@" "/lib/systemd/system/wpa_supplicant@.service" fi ####################################### echo "FPP - Populating ${FPPHOME}" mkdir ${FPPHOME}/.ssh chown ${FPPUSER}:${FPPUSER} ${FPPHOME}/.ssh chmod 700 ${FPPHOME}/.ssh mkdir ${FPPHOME}/media chown ${FPPUSER}:${FPPUSER} ${FPPHOME}/media chmod 775 ${FPPHOME}/media cat > ${FPPHOME}/.vimrc <<-EOF set tabstop=4 set shiftwidth=4 set expandtab set autoindent set ignorecase set mouse=r syntax on EOF chmod 644 ${FPPHOME}/.vimrc chown ${FPPUSER}:${FPPUSER} ${FPPHOME}/.vimrc echo >> ${FPPHOME}/.bashrc echo ". /opt/fpp/scripts/common" >> ${FPPHOME}/.bashrc echo >> ${FPPHOME}/.bashrc mkdir ${FPPHOME}/media/logs chown fpp:fpp ${FPPHOME}/media/logs ln -f -s "${FPPHOME}/media/config/.htaccess" /opt/fpp/www/.htaccess ln -f -s "${FPPHOME}/media/config/proxies" /opt/fpp/www/proxy/.htaccess ####################################### # Configure log rotation echo "FPP - Configuring log rotation" cp /opt/fpp/etc/logrotate.d/* /etc/logrotate.d/ sed -i -e "s/#compress/compress/" /etc/logrotate.conf sed -i -e "s/rotate .*/rotate 2/" /etc/logrotate.conf sed -i -e "s/weekly/daily/" /etc/logrotate.d/rsyslog ####################################### # Configure ccache echo "FPP - Configuring ccache" mkdir -p /root/.ccache if [ "$FPPPLATFORM" == "Raspberry Pi" -o "$FPPPLATFORM" == "BeagleBone Black" ]; then # On Beagle/Pi, we'll use a newer ccache to allow developer sharing of the cache if [ "x${OSVER}" != "xdebian_12" ]; then cd /opt/fpp/SD ./buildCCACHE.sh ccache -M 350M else ccache -M 500M fi else ccache -M 350M fi ccache --set-config=temporary_dir=/tmp ccache --set-config=sloppiness=pch_defines,time_macros ccache --set-config=hard_link=true ccache --set-config=pch_external_checksum=true if $isimage; then ####################################### echo "FPP - Configuring FTP server" sed -i -e "s/.*anonymous_enable.*/anonymous_enable=NO/" /etc/vsftpd.conf sed -i -e "s/.*local_enable.*/local_enable=YES/" /etc/vsftpd.conf sed -i -e "s/.*write_enable.*/write_enable=YES/" /etc/vsftpd.conf systemctl disable vsftpd ####################################### cp ${FPPHOME}/.vimrc /root/.vimrc ####################################### echo "FPP - Configuring Samba" cat <<-EOF >> /etc/samba/smb.conf [nobody] browseable = no [FPP] comment = FPP Media Share path = ${FPPHOME}/media veto files = /._*/.DS_Store/ delete veto files = yes writeable = Yes only guest = Yes create mask = 0777 directory mask = 0777 browseable = Yes public = yes force user = ${FPPUSER} EOF systemctl disable smbd systemctl disable nmbd fi ####################################### # Fix sudoers to not require password echo "FPP - Giving ${FPPUSER} user sudo" echo "${FPPUSER} ALL=(ALL:ALL) NOPASSWD: ALL" >> /etc/sudoers if $isimage; then ####################################### # Setup mail echo "FPP - Adding missing exim4 & ntpsec log directory" mkdir /var/log/ntpsec chown ntpsec:ntpsec /var/log/ntpsec mkdir /var/log/exim4 chown Debian-exim /var/log/exim4 chgrp Debian-exim /var/log/exim4 echo "FPP - Updating exim4 config file" cat <<-EOF > /etc/exim4/update-exim4.conf.conf # /etc/exim4/update-exim4.conf.conf # # Edit this file and /etc/mailname by hand and execute update-exim4.conf # yourself or use 'dpkg-reconfigure exim4-config' # # Please note that this is _not_ a dpkg-conffile and that automatic changes # to this file might happen. The code handling this will honor your local # changes, so this is usually fine, but will break local schemes that mess # around with multiple versions of the file. # # update-exim4.conf uses this file to determine variable values to generate # exim configuration macros for the configuration file. # # Most settings found in here do have corresponding questions in the # Debconf configuration, but not all of them. # # This is a Debian specific file dc_eximconfig_configtype='smarthost' dc_other_hostnames='fpp' dc_local_interfaces='127.0.0.1' dc_readhost='' dc_relay_domains='' dc_minimaldns='false' dc_relay_nets='' dc_smarthost='smtp.gmail.com::587' CFILEMODE='644' dc_use_split_config='true' dc_hide_mailname='false' dc_mailname_in_oh='true' dc_localdelivery='mail_spool' EOF # remove exim4 panic log so exim4 doesn't throw an alert about a non-zero log # file due to some odd error thrown during inital setup rm /var/log/exim4/paniclog #update config and restart exim update-exim4.conf ####################################### # Print notice during login regarding console access cat <<-EOF >> /etc/motd  _______ ___ / __/ _ \\/ _ \\ / _// ___/ ___/  Falcon Player /_/ /_/ /_/  This FPP console is for advanced users, debugging, and developers. If you aren't one of those, you're probably looking for the web-based GUI. You can access the UI by typing "http://fpp.local/" into a web browser. EOF ####################################### # Config fstab to mount some filesystems as tmpfs ARCH=$(uname -m) if [ "$ARCH" != "x86_64" ]; then echo "FPP - Configuring tmpfs filesystems" sed -i 's|tmpfs\s*/tmp\s*tmpfs.*||g' /etc/fstab echo "#####################################" >> /etc/fstab echo "tmpfs /tmp tmpfs nodev,nosuid,size=50M 0 0" >> /etc/fstab echo "tmpfs /var/tmp tmpfs nodev,nosuid,size=50M 0 0" >> /etc/fstab echo "#####################################" >> /etc/fstab fi COMMENTED="" SDA1=$(lsblk -l | grep sda1 | awk '{print $7}') if [ -n ${SDA1} ] then COMMENTED="#" fi echo "${COMMENTED}/dev/sda1 ${FPPHOME}/media auto defaults,nonempty,noatime,nodiratime,exec,nofail,flush,uid=500,gid=500 0 0" >> /etc/fstab echo "#####################################" >> /etc/fstab ####################################### # Prefer IPv4 echo "FPP - Prefer IPv4" echo "precedence ::ffff:0:0/96 100" >> /etc/gai.conf # need to keep extra memory to process network packets echo "vm.min_free_kbytes=16384" >> /etc/sysctl.conf fi ####################################### echo "FPP - Configuring Apache webserver" # Environment variables sed -i -e "s/APACHE_RUN_USER=.*/APACHE_RUN_USER=${FPPUSER}/" /etc/apache2/envvars sed -i -e "s/APACHE_RUN_GROUP=.*/APACHE_RUN_GROUP=${FPPUSER}/" /etc/apache2/envvars sed -i -e "s#APACHE_LOG_DIR=.*#APACHE_LOG_DIR=${FPPHOME}/media/logs#" /etc/apache2/envvars sed -i -e "s/Listen 8080.*/Listen 80/" /etc/apache2/ports.conf cat /opt/fpp/etc/apache2.site > /etc/apache2/sites-enabled/000-default.conf # Enable Apache modules a2dismod php${ACTUAL_PHPVER} a2dismod mpm_prefork a2enmod mpm_event a2enmod http2 a2enmod cgi a2enmod rewrite a2enmod proxy a2enmod proxy_http a2enmod proxy_http2 a2enmod proxy_html a2enmod headers a2enmod proxy_fcgi setenvif a2enconf php${ACTUAL_PHPVER}-fpm # Fix name of Apache default error log so it gets rotated by our logrotate config sed -i -e "s/error\.log/apache2-base-error.log/" /etc/apache2/apache2.conf # Disable default access logs rm /etc/apache2/conf-enabled/other-vhosts-access-log.conf case "${OSVER}" in debian_11 | debian_12 | ubuntu_22.04 | ubuntu_22.10 | linuxmint_21) systemctl enable apache2.service ;; esac ####################################### echo "FPP - Configuring NTP Daemon" # Clear all existing servers and pools and set default pool to be falconplayer NTP Pool sed -i '/^server.*/d' /etc/ntpsec/ntp.conf sed -i '/^pool.*/d' /etc/ntpsec/ntp.conf sed -i '$s/$/\npool falconplayer.pool.ntp.org iburst minpoll 8 maxpoll 12 prefer/' /etc/ntpsec/ntp.conf if [ "x${FPPPLATFORM}" = "xBeagleBone Black" ]; then ####################################### systemctl disable dev-hugepages.mount # CPU frequency scaling is disabled in our kernel, no need for the service to run systemctl disable cpufrequtils systemctl disable loadcpufreq.service if [ ! -f "/opt/source/bb.org-overlays/Makefile" ]; then mkdir -p /opt/source cd /opt/source git clone https://github.com/beagleboard/bb.org-overlays fi cd /opt/fpp/capes/drivers/bbb make -j ${CPUS} make install make clean # install the newer pru code generator apt-get install ti-pru-cgt-v2.3 #Set colored prompt sed -i -e "s/#force_color_prompt=yes/force_color_prompt=yes/" /home/fpp/.bashrc #adjust a bunch of settings in /boot/uEnv.txt sed -i -e "s+^#enable_uboot_cape_universal=\(.*\)+enable_uboot_cape_universal=1+g" /boot/uEnv.txt sed -i -e "s+^#disable_uboot_overlay_video=\(.*\)+disable_uboot_overlay_video=1+g" /boot/uEnv.txt sed -i -e "s+#uboot_overlay_addr0=\(.*\)+uboot_overlay_addr0=/lib/firmware/bbb-fpp-reserve-memory.dtbo+g" /boot/uEnv.txt sed -i -e "s+ quiet+ quiet rootwait+g" /boot/uEnv.txt sed -i -e "s+ net.ifnames=.+ +g" /boot/uEnv.txt sed -i -e "s+^uboot_overlay_pru=+#uboot_overlay_pru=+g" /boot/uEnv.txt echo "bootdelay=0" >> /boot/uEnv.txt echo "#cmdline=init=/opt/fpp/SD/BBB-AutoFlash.sh" >> /boot/uEnv.txt # remove the udev rules that create the SoftAp interface on the bbbw and bbggw rm -f /etc/udev/rules.d/*SoftAp* #cleanout some DRI files that are not needed at all on Beagle hardware rm -rf /usr/lib/arm-linux-gnueabihf/dri/r?00* rm -rf /usr/lib/arm-linux-gnueabihf/dri/rad* rm -rf /usr/lib/arm-linux-gnueabihf/dri/nouveau* rm -rf /usr/lib/arm-linux-gnueabihf/dri/rockchip* rm -rf /usr/lib/arm-linux-gnueabihf/dri/st* rm -rf /usr/lib/arm-linux-gnueabihf/dri/ili* rm -rf /usr/lib/arm-linux-gnueabihf/dri/imx* rm -rf /usr/lib/arm-linux-gnueabihf/dri/exy* rm -rf /usr/lib/arm-linux-gnueabihf/dri/etn* rm -rf /usr/lib/arm-linux-gnueabihf/dri/hx* rm -rf /usr/lib/arm-linux-gnueabihf/dri/kirin* rm -rf /usr/lib/arm-linux-gnueabihf/dri/rcar* rm -rf /usr/lib/arm-linux-gnueabihf/dri/mediatek* rm -rf /usr/lib/arm-linux-gnueabihf/dri/tegra* rm -rf /usr/lib/arm-linux-gnueabihf/dri/komeda* rm -rf /usr/lib/arm-linux-gnueabihf/dri/v3d* rm -rf /usr/lib/arm-linux-gnueabihf/dri/vc4* rm -rf /usr/lib/arm-linux-gnueabihf/dri/virtio* rm -rf /usr/lib/arm-linux-gnueabihf/dri/zink* rm -rf /usr/lib/arm-linux-gnueabihf/dri/lima* rm -rf /usr/lib/arm-linux-gnueabihf/dri/panfrost* rm -rf /usr/lib/arm-linux-gnueabihf/dri/armada* rm -rf /usr/lib/arm-linux-gnueabihf/dri/mi0283qt* rm -rf /usr/lib/arm-linux-gnueabihf/dri/pl111* rm -rf /usr/lib/arm-linux-gnueabihf/dri/msm* rm -rf /usr/lib/arm-linux-gnueabihf/dri/mcde* rm -rf /usr/lib/arm-linux-gnueabihf/dri/meson* rm -rf /usr/lib/arm-linux-gnueabihf/dri/ingenic* rm -rf /usr/lib/arm-linux-gnueabihf/dri/mali* rm -rf /usr/lib/arm-linux-gnueabihf/dri/mxs* rm -rf /usr/lib/arm-linux-gnueabihf/dri/rep* rm -rf /usr/lib/arm-linux-gnueabihf/dri/sun* rm -rf /usr/lib/arm-linux-gnueabihf/dri/vmw* fi if $isimage; then rm -rf /usr/share/doc/* apt-get clean fi ####################################### echo "FPP - Configuring FPP startup" cp /opt/fpp/etc/systemd/*.service /lib/systemd/system/ if [ "$FPPPLATFORM" == "BeagleBone Black" ]; then # Beagles don't have hdmi/video out so no need to wait for getty before starting up sed -i -e "s/getty.target//g" /lib/systemd/system/fppd.service fi cp /opt/fpp/etc/avahi/* /etc/avahi/services if $isimage; then cp /opt/fpp/etc/networkd-dispatcher/routable.d/* /etc/networkd-dispatcher/routable.d fi systemctl disable mosquitto systemctl daemon-reload systemctl enable fppinit.service systemctl enable fpprtc.service systemctl enable fppoled.service systemctl enable fppd.service systemctl enable fpp_postnetwork.service if $isimage; then cp /opt/fpp/etc/update-RTC /etc/cron.daily # Make sure the journal is large enough to store the full boot logs # but not get too large which starts slowing down journalling (and thus boot) if [ -f /etc/systemd/journald.conf ]; then sed -i -e "s/^.*SystemMaxUse.*/SystemMaxUse=96M/g" /etc/systemd/journald.conf fi rm -f /etc/systemd/network/*eth* rm -f /etc/systemd/network/*wlan* cp /opt/fpp/etc/systemd/network/* /etc/systemd/network fi echo "FPP - Compiling binaries" cd /opt/fpp/src/ make clean ; make -j ${CPUS} optimized ###################################### if [ "$FPPPLATFORM" == "Raspberry Pi" -o "$FPPPLATFORM" == "BeagleBone Black" ]; then if [ "x${OSVER}" != "xdebian_12" ]; then if [ "$FPPPLATFORM" == "Raspberry Pi" ]; then echo "FPP - Install kernel headers so modules can be compiled later" apt-get -y install raspberrypi-kernel-headers apt-get clean fi echo "FPP - Compiling WIFI drivers" cd /opt/fpp/SD bash ./FPP-Wifi-Drivers.sh rm -f /etc/modprobe.d/rtl8723bu-blacklist.conf fi # replace entry already there sed -i 's/^DAEMON_CONF.*/DAEMON_CONF="\/etc\/hostapd\/hostapd.conf"/g' /etc/default/hostapd if ! grep -q etc/hostapd/hostapd.conf "/etc/default/hostapd"; then # not there, append after the commented out default line sed -i 's/^#DAEMON_CONF\(.*\)/#DAEMON_CONF\1\nDAEMON_CONF="\/etc\/hostapd\/hostapd.conf"/g' /etc/default/hostapd fi if ! grep -q etc/hostapd/hostapd.conf "/etc/default/hostapd"; then # default line not there, just append to end of file echo "DAEMON_CONF=\"/etc/hostapd/hostapd.conf\"" >> /etc/default/hostapd fi echo "ALGO=zstd" >> /etc/default/zramswap echo "SIZE=75" >> /etc/default/zramswap echo "PRIORITY=100" >> /etc/default/zramswap echo "vm.swappiness=1" >> /etc/sysctl.d/10-swap.conf echo "vm.vfs_cache_pressure=50" >> /etc/sysctl.d/10-swap.conf if $isimage; then # make sure the existing users are completely removed rm -rf /home/pi rm -rf /home/debian fi fi if $isimage; then systemctl disable dnsmasq systemctl unmask hostapd systemctl disable hostapd fi if [ "$FPPPLATFORM" == "BeagleBone Black" ]; then # Bootloader on recent bullseye images does NOT boot on Beagles, use a version we # know works /opt/fpp/bin.bbb/bootloader/install.sh fi if $isimage; then rm -f /etc/resolv.conf ln -s /run/systemd/resolve/resolv.conf /etc/resolv.conf fi ENDTIME=$(date) echo "=========================================================" echo "FPP Install Complete." echo "Started : ${STARTTIME}" echo "Finished: ${ENDTIME}" echo "=========================================================" echo "You can reboot the system by changing to the '${FPPUSER} user with the" echo "password 'falcon' and running the shutdown command." echo "" echo "su - ${FPPUSER}" echo "sudo shutdown -r now" echo "" echo "NOTE: If you are prepping this as an image for release," echo "remove the SSH keys before shutting down so they will be" echo "rebuilt during the next boot." echo "" echo "su - ${FPPUSER}" echo "sudo rm -rf /etc/ssh/ssh_host*key*" echo "sudo shutdown -r now" echo "=========================================================" echo "" cp /root/FPP_Install.* ${FPPHOME}/ chown fpp:fpp ${FPPHOME}/FPP_Install.*