METADATA last updated: 2025-12-14 RT after BA fixed inconsistencies file_name: SOP-103-A_1 Amplification - Run Form.md file_date: 2022-01-22 title: FloodLAMP QMS SOP-103-A_1 Amplification - Run Form category: guides subcategory: qms-sops tags: source_file_type: gdoc xfile_type: docx gfile_url: https://docs.google.com/document/d/1XFMcUP6L8pzn2crTuWiHZF-UeybzBO64FLrGozo9O3M xfile_github_download_url: https://raw.githubusercontent.com/FocusOnFoundationsNonprofit/floodlamp-archive/main/guides/qms-sops/SOP-103-A_1%20Amplification%20-%20Run%20Form.docx pdf_gdrive_url: https://drive.google.com/file/d/1yhaVkXZJYI7PtKd7kGpM0AGN4aA2IPi8 pdf_github_url: https://github.com/FocusOnFoundationsNonprofit/floodlamp-archive/blob/main/guides/qms-sops/SOP-103-A_1%20Amplification%20-%20Run%20Form.pdf conversion_input_file_type: docx conversion: pandoc license: CC BY 4.0 - https://creativecommons.org/licenses/by/4.0/ tokens: 877 words: 473 notes: summary_short: The FloodLAMP QMS SOP-103-A_1 is a run form for performing sample inactivation and LAMP amplification, including required PPE, heater setup checks, and step-by-step timing/temperature instructions for water bath or dry heat block inactivation and 65 °C amplification. It provides write-in fields for batch IDs, heater IDs, reagent IDs, control IDs, dispensing method, and run notes to support traceability in the linked site log. The form also includes lookup map tables for recording sample positions in strip tubes or plates. CONTENT FloodLAMP Biotechnologies **Document Number:** SOP-103-A_1 **Effective Date:** 01/22/2022 **Version:** 1 ***INTERNAL TITLE:*** Amplification - Run Form ## PREP Heaters on (Heat indicator lit!) - 1X Inactivation Saline Soln ready - Reaction mix strip8/plates ready - Safety Procedures: - lab coat - gloves - face mask - face shield or goggles - Alcohol wipe sample tubes ## PREP USER WRITE IN Log Link: SOP-103-B_1 {SITE} Location: Name: Date: Time: ## INACTIVATION - Add 1mL of 1X Inactiv Saline Soln to each sample tube - Vortex 10sec (tubes) or 30sec (rack) - Water Bath (set 99°C) - Heat 8 min then Cool 10 min - Dry Heat Block (set 95°C) - Heat 5 min then Cool 5 min ## INACTIVATION USER WRITE IN Sample Batch ID (from App): Inactiv Heater: 1X Inactiv Saline Soln ID: Dispense: Pipette or Manual Disp or Electric Disp ## AMPLIFICATION REACTION - Thaw Reaction Mix (if frozen) - Setup tips to align with reactions - Add 2μL from each sample tube (pipet up& down 5X, blowout in liquid, tip touch) - Heat 65°C for 25 min, set timer - Intake sample tubes in App - Put sample tubes in fridge - Remove Reactions and Let cool for 1 min before photo - Take photo in lightbox - Crop photo and apply vivid filter - Update results in App - Log Run with Form link ## AMPLIFICATION REACTION USER WRITE IN Amp Heater: Strip8 Tubes or Plates Reaction Mix: Frozen or Fresh Reaction Mix ID: Num Reactions (including controls): Pos Ctrl ID: Neg Ctrl ID (today's 1XISS): Initial Inconclusives?: Notes: ## Lookup Map | | | | | | | | |---------|-------|-------|-------|-------|-------|-------| | | **1** | **2** | **3** | **4** | **5** | **6** | | **A 1** | | | | | | | | **B 2** | | | | | | | | **C 3** | | | | | | | | **D 4** | | | | | | | | **E 5** | | | | | | | | **F 6** | | | | | | | | **G 7** | | | | | | | | **H 8** | | | | | | | || | | | | | | | | |---------|-------|-------|-------|--------|--------|--------| | | **7** | **8** | **9** | **10** | **11** | **12** | | **A 1** | | | | | | | | **B 2** | | | | | | | | **C 3** | | | | | | | | **D 4** | | | | | | | | **E 5** | | | | | | | | **F 6** | | | | | | | | **G 7** | | | | | | | | **H 8** | | | | | | | ||