hikvision-unifi-fire-bridge ghcr.io/gasmanc/hikvision-unifi-fire-bridge:0.1.1 https://ghcr.io/gasmanc/hikvision-unifi-fire-bridge bridge sh false https://raw.githubusercontent.com/Gasmanc/unraid-templates/main/images/hikvision-unifi-fire-bridge.svg http://[IP]:[PORT:8080]/status Bridges a Hikvision thermal camera's fire and Temperature-Measurement-Alarm (TMA) events into a UniFi Protect Alarm Manager webhook - a camera fire alarm can ring a Protect siren, send a priority push, or drive any Alarm Manager action. Fail-loud by design: re-alerts every 60s while the fire stays active, proactively probes the Protect path so a broken webhook surfaces before a fire, and enforces strict TLS. NOT certified life-safety equipment: not a substitute for compliant smoke alarms, fire panels, or emergency procedures, and carries no safety certification. Use only in addition to properly certified fire detection, at your own risk. https://github.com/Gasmanc/hikvision-unifi-fire-bridge/issues https://github.com/Gasmanc/hikvision-unifi-fire-bridge https://raw.githubusercontent.com/Gasmanc/unraid-templates/main/templates/hikvision-unifi-fire-bridge.xml https://raw.githubusercontent.com/Gasmanc/hikvision-unifi-fire-bridge/main/README.md HomeAutomation: Security: hikvision unifi protect fire alarm thermal isapi bridge A Hikvision camera exposing the ISAPI alert stream, and UniFi Protect with an Alarm Manager incoming webhook + API key. The Protect host must present a valid TLS certificate. 6.12 AGPL-3.0-or-later --restart unless-stopped --read-only --tmpfs /tmp:rw,noexec,nosuid,size=16m --cap-drop ALL --security-opt no-new-privileges:true 8080 http 60 60 300 60 90 5 3 info