/**
* IMPORT URL: https://raw.githubusercontent.com/HubitatCommunity/HoneywellThermo-TCC/master/HoneywellThermo-TCC.groovy
*
* Total Comfort API
*
* Based on Code by Eric Thomas, Edited by Bob Jase, and C Steele
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
* in compliance with the License. You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
* Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
* on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
* for the specific language governing permissions and limitations under the License.
*
*
* csteele: v1.2.2 replaced F/C selection with value from Location in the hub.
* csteele: v1.2 option of polling interval, off through 60 min. added txtEnable for Description logging.
* csteele: v1.1.5 allow option of permanent or temporary hold.
* csteele: v1.1 merged Pull Request from rylatorr: Use permanent hold instead of temporary
* csteele: v1.0 added Cobra's Version Check code, modified debug logging to match Hubitat standards, (on/off and 30 min limit)
* removed Relative Humidity and SmartThings "main" paragraph
*
* (Bob) version 10 deals with the fact that Honeywell decided to poison the well with expired cookies
* I also changed it so that it polls for an update every 60 seconds
* lgk version 9 an indicator on the bottom which indicates if following schedule or vacation or temp hold.
* it also displays green for following schedule and red for other modes.
* you can also select it to cancel a hold and go back to following schedule.
* however, the temp will not update till next refresh even though you have cancelled the hold.
* One problem, is that the colors are not working correctly in ios currently and the label is not
* wrapping in android as it is supposed to.
* lgk version 8 figured out how to do time without user input of time zone offset.. and this works with and without
* daylight saving time.
* lgk version 7, change the new operating state to be a value vs standard tile
* to work around a bug smartthings caused in the latest 2.08 release with text wrapping.
* related also added icons to the operating state, and increase the width of the last update
* to avoid wrapping.
* lgk version 6 add support for actually knowing the fan is on or not (added tile),
* and also the actual operating state ie heating,cooling or idle via new response variables.
* lgk version 5, due to intermittant update failures added last update date/time tile so that you can see when it happended
* not there is a new input tzoffset which defaults to my time ie -5 which you must set .
* lgk version 4 supports celsius and fahrenheit with option, and now colors.
* lgk v 3 added optional outdoor temp sensors and preferences for it, also made api login required.
*
*/
metadata {
definition (name: "Total Comfort API B", namespace:
"Total Comfort API", author: "Eric Thomas, lg kahn, C Steele") {
capability "Polling"
capability "Thermostat"
capability "Refresh"
capability "Temperature Measurement"
capability "Sensor"
// capability "Relative Humidity Measurement"
command "heatLevelUp"
command "heatLevelDown"
command "coolLevelUp"
command "coolLevelDown"
command "setFollowSchedule"
attribute "outdoorHumidity", "number"
attribute "outdoorTemperature", "number"
attribute "lastUpdate", "string"
attribute "followSchedule", "string"
attribute "DriverAuthor", "string"
attribute "DriverVersion", "string"
attribute "DriverStatus", "string"
attribute "DriverUpdate", "string"
attribute "ThermostatOperatingState", "string"
}
preferences {
input name: "username", type: "text", title: "Username", description: "Your Total Comfort User Name", required: true
input name: "password", type: "password", title: "Password", description: "Your Total Comfort password",required: true
input name: "honeywelldevice", type: "text", title: "Device ID", description: "Your Device ID", required: true
input name: "enableOutdoorTemps", type: "enum", title: "Do you have the optional outdoor temperature sensor and want to enable it?", options: ["Yes", "No"], required: false, defaultValue: "No"
input name: "setPermHold", type: "enum", title: "Will Setpoints be temporary or permanent?", options: ["Temporary", "Permanent"], required: false, defaultValue: "Temporary"
input name: "pollIntervals", type: "enum", title: "Set the Poll Interval.", options: [0:"off", 60:"1 minute", 120:"2 minutes", 300:"5 minutes",600:"10 minutes",900:"15 minutes",1800:"30 minutes",3600:"60 minutes"], required: true, defaultValue: "600"
input name: "debugOutput", type: "bool", title: "Enable debug logging?", defaultValue: true
input name: "txtEnable", type: "bool", title: "Enable descriptionText logging", defaultValue: true
}
}
// Driver Version ***** with great thanks and acknowlegment to Cobra (CobraVmax) for his original version checking code ********
def setVersion(){
state.Version = "1.2.2"
state.InternalName = "HoneywellThermoTCC"
sendEvent(name: "DriverAuthor", value: "cSteele")
sendEvent(name: "DriverVersion", value: state.version)
sendEvent(name: "DriverStatus", value: state.Status)
}
def coolLevelUp() {
if (location.temperatureScale == "F")
{
int nextLevel = device.currentValue("coolingSetpoint") + 1
if( nextLevel > 99){
nextLevel = 99
}
logDebug "Setting cool set point up to: ${nextLevel}"
setCoolingSetpoint(nextLevel)
}
else
{
int nextLevel = device.currentValue("coolingSetpoint") + 0.5
if( nextLevel > 37){
nextLevel = 37
}
logDebug "Setting cool set point up to: ${nextLevel}"
setCoolingSetpoint(nextLevel)
}
}
def coolLevelDown() {
if (location.temperatureScale == "F")
{
int nextLevel = device.currentValue("coolingSetpoint") - 1
if( nextLevel < 50){
nextLevel = 50
}
logDebug "Setting cool set point down to: ${nextLevel}"
setCoolingSetpoint(nextLevel)
}
else
{
double nextLevel = device.currentValue("coolingSetpoint") - 0.5
if( nextLevel < 10){
nextLevel = 10
}
logDebug "Setting cool set point down to: ${nextLevel}"
setCoolingSetpoint(nextLevel)
}
}
def heatLevelUp() {
if (location.temperatureScale == "F")
{
logDebug "in fahrenheit level up"
int nextLevel = device.currentValue("heatingSetpoint") + 1
if( nextLevel > 90){
nextLevel = 90
}
logDebug "Setting heat set point up to: ${nextLevel}"
setHeatingSetpoint(nextLevel)
}
else
{
logDebug "in celsius level up"
double nextLevel = device.currentValue("heatingSetpoint") + 0.5
if( nextLevel > 33){
nextLevel = 33
}
logDebug "Setting heat set point up to: ${nextLevel}"
setHeatingSetpoint(nextLevel)
}
}
def heatLevelDown() {
if (location.temperatureScale == "F")
{
logDebug "in fahrenheit level down"
int nextLevel = device.currentValue("heatingSetpoint") - 1
if( nextLevel < 40){
nextLevel = 40
}
logDebug "Setting heat set point down to: ${nextLevel}"
setHeatingSetpoint(nextLevel)
}
else
{
logDebug "in celsius level down"
double nextLevel = device.currentValue("heatingSetpoint") - 0.5
if( nextLevel < 4){
nextLevel = 4
}
logDebug "Setting heat set point down to: ${nextLevel}"
setHeatingSetpoint(nextLevel)
}
}
// parse events into attributes
def parse(String description) {
}
// handle commands
def setHeatingSetpoint(Double temp)
{
device.data.SystemSwitch = 'null'
device.data.HeatSetpoint = temp
device.data.CoolSetpoint = 'null'
device.data.HeatNextPeriod = 'null'
device.data.CoolNextPeriod = 'null'
device.data.StatusHeat = state.PermHold
device.data.StatusCool = state.PermHold
device.data.FanMode = 'null'
setStatus()
if(device.data.SetStatus==1)
{
sendEvent(name: 'heatingSetpoint', value: temp as double)
}
}
def setHeatingSetpoint(temp) {
device.data.SystemSwitch = 'null'
device.data.HeatSetpoint = temp
device.data.CoolSetpoint = 'null'
device.data.HeatNextPeriod = 'null'
device.data.CoolNextPeriod = 'null'
device.data.StatusHeat = state.PermHold
device.data.StatusCool = state.PermHold
device.data.FanMode = 'null'
setStatus()
if(device.data.SetStatus==1)
{
sendEvent(name: 'heatingSetpoint', value: temp as Integer)
}
}
def setFollowSchedule() {
logDebug "in set follow schedule"
device.data.SystemSwitch = 'null'
device.data.HeatSetpoint = 'null'
device.data.CoolSetpoint = 'null'
device.data.HeatNextPeriod = 'null'
device.data.CoolNextPeriod = 'null'
device.data.StatusHeat='0'
device.data.StatusCool='0'
device.data.FanMode = 'null'
setStatus()
if(device.data.SetStatus==1)
{
logDebug "Successfully sent follow schedule.!"
// runIn(60,getStatus)
// runEvery1Minutes (getStatus)
}
}
def setCoolingSetpoint(double temp) {
device.data.SystemSwitch = 'null'
device.data.HeatSetpoint = 'null'
device.data.CoolSetpoint = temp
device.data.HeatNextPeriod = 'null'
device.data.CoolNextPeriod = 'null'
device.data.StatusHeat = state.PermHold
device.data.StatusCool = state.PermHold
device.data.FanMode = 'null'
setStatus()
if(device.data.SetStatus==1)
{
sendEvent(name: 'coolingSetpoint', value: temp as double)
}
}
def setCoolingSetpoint(temp) {
device.data.SystemSwitch = 'null'
device.data.HeatSetpoint = 'null'
device.data.CoolSetpoint = temp
device.data.HeatNextPeriod = 'null'
device.data.CoolNextPeriod = 'null'
device.data.StatusHeat = state.PermHold
device.data.StatusCool = state.PermHold
device.data.FanMode = 'null'
setStatus()
if(device.data.SetStatus==1)
{
sendEvent(name: 'coolingSetpoint', value: temp as Integer)
}
}
def setTargetTemp(temp) {
device.data.SystemSwitch = 'null'
device.data.HeatSetpoint = temp
device.data.CoolSetpoint = temp
device.data.HeatNextPeriod = 'null'
device.data.CoolNextPeriod = 'null'
device.data.StatusHeat = state.PermHold
device.data.StatusCool = state.PermHold
device.data.FanMode = 'null'
setStatus()
}
def setTargetTemp(double temp) {
device.data.SystemSwitch = 'null'
device.data.HeatSetpoint = temp
device.data.CoolSetpoint = temp
device.data.HeatNextPeriod = 'null'
device.data.CoolNextPeriod = 'null'
device.data.StatusHeat = state.PermHold
device.data.StatusCool = state.PermHold
device.data.FanMode = 'null'
setStatus()
}
def off() {
setThermostatMode(2)
}
def auto() {
setThermostatMode(4)
}
def heat() {
setThermostatMode(1)
}
def emergencyHeat() {
}
def cool() {
setThermostatMode(3)
}
def setThermostatMode(mode) {
device.data.SystemSwitch = mode
device.data.HeatSetpoint = 'null'
device.data.CoolSetpoint = 'null'
device.data.HeatNextPeriod = 'null'
device.data.CoolNextPeriod = 'null'
device.data.StatusHeat = state.PermHold
device.data.StatusCool = state.PermHold
device.data.FanMode = 'null'
setStatus()
def switchPos
if(mode==1)
switchPos = 'heat'
if(mode==2)
switchPos = 'off'
if(mode==3)
switchPos = 'cool'
/* lgk modified my therm has pos 5 for auto vision pro */
if(mode==4 || swithPos == 5)
switchPos = 'auto'
if(device.data.SetStatus==1)
{
sendEvent(name: 'thermostatMode', value: switchPos)
}
}
def fanOn() {
setThermostatFanMode(1)
}
def fanAuto() {
setThermostatFanMode(0)
}
def fanCirculate() {
setThermostatFanMode(2)
}
def setThermostatFanMode(mode) {
device.data.SystemSwitch = 'null'
device.data.HeatSetpoint = 'null'
device.data.CoolSetpoint = 'null'
device.data.HeatNextPeriod = 'null'
device.data.CoolNextPeriod = 'null'
device.data.StatusHeat='null'
device.data.StatusCool='null'
device.data.FanMode = mode
setStatus()
def fanMode
if(mode==0)
fanMode = 'auto'
if(mode==1)
fanMode = 'on'
if(mode==2)
fanMode = 'circulate'
if(device.data.SetStatus==1)
{
sendEvent(name: 'thermostatFanMode', value: fanMode)
}
}
def setStatus() {
device.data.SetStatus = 0
login()
logDebug "Executing 'setStatus'"
def today= new Date()
logDebug "https://www.mytotalconnectcomfort.com/portal/Device/SubmitControlScreenChanges"
logDebug "setting heat setpoint to $device.data.HeatSetpoint"
logDebug "setting cool setpoint to $device.data.CoolSetpoint"
def params = [
uri: "https://www.mytotalconnectcomfort.com/portal/Device/SubmitControlScreenChanges",
headers: [
'Accept': 'application/json, text/javascript, */*; q=0.01', // */ comment
'DNT': '1',
'Accept-Encoding': 'gzip,deflate,sdch',
'Cache-Control': 'max-age=0',
'Accept-Language': 'en-US,en,q=0.8',
'Connection': 'keep-alive',
'Host': 'mytotalconnectcomfort.com',
'Referer': "https://www.mytotalconnectcomfort.com/portal/Device/Control/${settings.honeywelldevice}",
'X-Requested-With': 'XMLHttpRequest',
'User-Agent': 'Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/28.0.1500.95 Safari/537.36',
'Cookie': device.data.cookiess ],
body: [ DeviceID: "${settings.honeywelldevice}", SystemSwitch : device.data.SystemSwitch ,HeatSetpoint :
device.data.HeatSetpoint, CoolSetpoint: device.data.CoolSetpoint, HeatNextPeriod:
device.data.HeatNextPeriod,CoolNextPeriod:device.data.CoolNextPeriod,StatusHeat:device.data.StatusHeat,
StatusCool:device.data.StatusCool,FanMode:device.data.FanMode,ThermostatUnits: location.temperatureScale]
]
logDebug "params = $params"
httpPost(params) { response ->
logDebug "Request was successful, $response.status"
}
logDebug "SetStatus is 1 now"
device.data.SetStatus = 1
}
def getStatus() {
logDebug "Executing getStatus"
logDebug "enable outside temps = $enableOutdoorTemps"
def today= new Date()
logDebug "https://www.mytotalconnectcomfort.com/portal/Device/CheckDataSession/${settings.honeywelldevice}?_=$today.time"
def params = [
uri: "https://www.mytotalconnectcomfort.com/portal/Device/CheckDataSession/${settings.honeywelldevice}",
headers: [
'Accept': '*/*',
'DNT': '1',
'Cache' : 'false',
'dataType': 'json',
'Accept-Encoding': 'plain',
'Cache-Control': 'max-age=0',
'Accept-Language': 'en-US,en,q=0.8',
'Connection': 'keep-alive',
'Referer': 'https://www.mytotalconnectcomfort.com/portal',
'X-Requested-With': 'XMLHttpRequest',
'User-Agent': 'Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/28.0.1500.95 Safari/537.36',
'Cookie': device.data.cookiess ],
]
logDebug "doing request"
try {
httpGet(params) { response ->
logDebug "Request was successful, $response.status"
//logInfo "data = $response.data"
logDebug "ld = $response.data.latestData"
def curTemp = response.data.latestData.uiData.DispTemperature
def fanMode = response.data.latestData.fanData.fanMode
def switchPos = response.data.latestData.uiData.SystemSwitchPosition
def coolSetPoint = response.data.latestData.uiData.CoolSetpoint
def heatSetPoint = response.data.latestData.uiData.HeatSetpoint
def statusCool = response.data.latestData.uiData.StatusCool
def statusHeat = response.data.latestData.uiData.StatusHeat
def curHumidity = response.data.latestData.uiData.IndoorHumidity
def Boolean hasOutdoorHumid = response.data.latestData.uiData.OutdoorHumidityAvailable
def Boolean hasOutdoorTemp = response.data.latestData.uiData.OutdoorTemperatureAvailable
def curOutdoorHumidity = response.data.latestData.uiData.OutdoorHumidity
def curOutdoorTemp = response.data.latestData.uiData.OutdoorTemperature
def displayUnits = response.data.latestData.uiData.DisplayUnits
def fanIsRunning = response.data.latestData.fanData.fanIsRunning
def equipmentStatus = response.data.latestData.uiData.EquipmentOutputStatus
def holdTime = response.data.latestData.uiData.TemporaryHoldUntilTime
def vacationHold = response.data.latestData.uiData.IsInVacationHoldMode
logDebug "got holdTime = $holdTime"
logDebug "got Vacation Hold = $vacationHold"
if (holdTime != 0)
{ logDebug "sending temporary hold"
sendEvent(name: 'followSchedule', value: "TemporaryHold")
}
if (vacationHold == true)
{ logDebug "sending vacation hold"
sendEvent(name: 'followSchedule', value: "VacationHold")
}
if (vacationHold == false && holdTime == 0)
{
logDebug "Sending following schedule"
sendEvent(name: 'followSchedule', value: "FollowingSchedule")
}
// logDebug "displayUnits = $displayUnits"
state.DisplayUnits = $displayUnits
//Operating State Section
//Set the operating state to off
def operatingState = "Unknown"
// lgk operating state not working here.. shows both on ie 1 when heat doesnt go on to 67 and heat till 76 and current is 73
//Check the status of heat and cool
// lgk old method now use equipment status
if (equipmentStatus == 1) {
operatingState = "Heating"
} else if (equipmentStatus == 2) {
operatingState = "Cooling"
} else if (equipmentStatus == 0) {
operatingState = "Idle"
} else {
operatingState = "Unknown"
}
logInfo("Set operating State to: ${operatingState}")
// set fast state
def fanState = "Unknown"
if (fanIsRunning == true)
fanState = "On"
else fanState = "Idle"
logInfo("Set Fan operating State to: ${fanState}")
//End Operating State
// logDebug ("curTemp: ${curTemp}")
// logDebug ("fanMode: ${fanMode}")
// logDebug ("switchPos: ${switchPos}")
//fan mode 0=auto, 2=circ, 1=on
if(fanMode==0)
fanMode = 'auto'
if(fanMode==1)
fanMode = 'on'
if(fanMode==2)
fanMode = 'circulate'
if(switchPos==1)
switchPos = 'heat'
if(switchPos==2)
switchPos = 'off'
if(switchPos==3)
switchPos = 'cool'
if(switchPos==4 || switchPos==5)
switchPos = 'auto'
// def formattedCoolSetPoint = String.format("%5.1f", coolSetPoint)
// def formattedHeatSetPoint = String.format("%5.1f", heatSetPoint)
// def formattedTemp = String.format("%5.1f", curTemp)
//
// def finalCoolSetPoint = formattedCoolSetPoint as BigDecimal
// def finalHeatSetPoint = formattedHeatSetPoint as BigDecimal
// def finalTemp = formattedTemp as BigDecimal
//Send events
sendEvent(name: 'thermostatOperatingState', value: operatingState)
sendEvent(name: 'fanOperatingState', value: fanState)
sendEvent(name: 'thermostatFanMode', value: fanMode)
sendEvent(name: 'thermostatMode', value: switchPos)
sendEvent(name: 'coolingSetpoint', value: coolSetPoint )
sendEvent(name: 'heatingSetpoint', value: heatSetPoint )
sendEvent(name: 'temperature', value: curTemp, state: switchPos)
sendEvent(name: 'relativeHumidity', value: curHumidity as Integer)
//logDebug "location = $location.name tz = $location.timeZone"
def now = new Date().format('MM/dd/yyyy h:mm a',location.timeZone)
//def now = new Date()
//def tf = new java.text.SimpleDateFormat("MM/dd/yyyy h:mm a")
//tf.setTimeZone(TimeZone.getTimeZone("GMT${settings.tzOffset}"))
//def newtime = "${tf.format(now)}" as String
// sendEvent(name: "lastUpdate", value: newtime, descriptionText: "Last Update: $newtime")
sendEvent(name: "lastUpdate", value: now, descriptionText: "Last Update: $now")
if (enableOutdoorTemps == "Yes")
{
if (hasOutdoorHumid)
{
sendEvent(name: 'outdoorHumidity', value: curOutdoorHumidity as Integer)
}
if (hasOutdoorTemp)
{
sendEvent(name: 'outdoorTemperature', value: curOutdoorTemp as Integer)
}
}
}
}
catch (e) {
log.warn "Something went wrong: $e"
}
}
def getHumidifierStatus()
{
def params = [
uri: "https://www.mytotalconnectcomfort.com/portal/Device/Menu/GetHumData/${settings.honeywelldevice}",
headers: [
'Accept': '*/*',
'DNT': '1',
'dataType': 'json',
'cache': 'false',
'Accept-Encoding': 'plain',
'Cache-Control': 'max-age=0',
'Accept-Language': 'en-US,en,q=0.8',
'Connection': 'keep-alive',
'Host': 'rs.alarmnet.com',
'Referer': 'https://www.mytotalconnectcomfort.com/portal/Menu/${settings.honeywelldevice}',
'X-Requested-With': 'XMLHttpRequest',
'User-Agent': 'Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/28.0.1500.95 Safari/537.36',
'Cookie': device.data.cookiess ],
]
try {
httpGet(params) { response ->
logDebug "GetHumidity Request was successful, $response.status"
logDebug "response = $response.data"
// logDebug "ld = $response.data.latestData"
// logDebug "humdata = $response.data.latestData.humData"
logInfo("lowerLimit: ${response.data.latestData.humData.lowerLimit}")
logInfo("upperLimit: ${response.data.humData.upperLimit}")
logInfo("SetPoint: ${response.data.humData.Setpoint}")
logInfo("DeviceId: ${response.data.humData.DeviceId}")
logInfo("IndoorHumidity: ${response.data.humData.IndoorHumidity}")
}
}
catch (e) {
log.error "Something went wrong: $e"
}
}
def api(method, args = [], success = {}) {
}
// Need to be logged in before this is called. So don't call this. Call api.
def doRequest(uri, args, type, success) {
}
def refresh() {
logDebug "Executing 'refresh'"
def unit = location.temperatureScale
logDebug "pollInterval: $pollInterval, units: = $unit"
login()
//getHumidifierStatus()
getStatus()
}
def login() {
logInfo "Executing 'login'"
def params = [
uri: 'https://www.mytotalconnectcomfort.com/portal',
headers: [
'Content-Type': 'application/x-www-form-urlencoded',
'Accept': 'application/json, text/javascript, */*; q=0.01', // */
'Accept-Encoding': 'sdch',
'Host': 'www.mytotalconnectcomfort.com',
'DNT': '1',
'Origin': 'www.mytotalconnectcomfort.com/portal/',
'User-Agent': 'Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/28.0.1500.95 Safari/537.36'
],
body: [timeOffset: '240', UserName: "${settings.username}", Password: "${settings.password}", RememberMe: 'false']
]
device.data.cookiess = ''
try {
httpPost(params) { response ->
logDebug "Request was successful, $response.status"
logDebug response.headers
String allCookies = ""
//response.getHeaders('Set-Cookie').each {
// logDebug "---Set-Cookie: ${it.value}"
// }
response.getHeaders('Set-Cookie').each {
String cookie = it.value.split(';|,')[0]
Boolean skipCookie = false
def expireParts = it.value.split('expires=')
try {
def cookieSegments = it.value.split(';')
for (int i = 0; i < cookieSegments.length; i++) {
def cookieSegment = cookieSegments[i]
String cookieSegmentName = cookieSegment.split('=')[0]
if (cookieSegmentName.trim() == "expires") {
String expiration = cookieSegment.split('=')[1]
Date expires = new Date(expiration)
Date newDate = new Date() // right now
if (expires < newDate ) {
skipCookie=true
//logDebug "-skip cookie: $it.value"
} else {
//logDebug "+not skipping cookie: expires=$expires. now=$newDate. cookie: $it.value"
}
}
}
}
catch (e) {
logDebug "!error when checking expiration date: $e ($expiration) [$expireParts.length] {$it.value}"
}
allCookies = allCookies + it.value + ';'
if(cookie != ".ASPXAUTH_TH_A=") {
if (it.value.split('=')[1].trim() != "") {
if (!skipCookie) {
logDebug "Adding cookie to collection: $cookie"
device.data.cookiess = device.data.cookiess+cookie+';'
}
}
}
}
logDebug "cookies: $device.data.cookiess"
}
}
catch (e) {
log.warn "Something went wrong: $e"
}
}
def isLoggedIn() {
if(!device.data.auth) {
logDebug "No device.data.auth"
return false
}
def now = new Date().getTime();
return device.data.auth.expires_in > now
}
def poll() {
logInfo "in poll: $pollInterval"
pollInterval = pollIntervals.toInteger()
if (pollInterval) runIn(pollInterval, poll)
refresh()
}
def updated() {
logDebug "in updated"
pollInterval = pollIntervals.toInteger()
state.DisplayUnits = location.temperatureScale
logDebug "display units now = $state.DisplayUnits"
logDebug "debug logging is: ${debugOutput == true}"
log.warn "description logging is: ${txtEnable == true}"
unschedule()
if (debugOutput) runIn(1800,logsOff)
if (setPermHold == "Permanent") { state.PermHold = 2 } else { state.PermHold = 1 }
logDebug "PermHold now = ${state.PermHold}"
poll()
version()
}
def installed() {
state.DisplayUnits = location.temperatureScale
logDebug "display units now = $state.DisplayUnits"
}
def logsOff(){
log.warn "debug logging disabled..."
device.updateSetting("debugOutput",[value:"false",type:"bool"])
}
private logDebug(msg) {
if (settings?.debugOutput || settings?.debugOutput == null) log.debug "$msg"
}
private logInfo(msg) {
if (settings?.txtEnable || settings?.txtEnable == null) log.info "$msg"
}
// Driver Version ***** with great thanks and acknowlegment to Cobra (CobraVmax) for his original version checking code ********
def version(){
schedule("0 0 8 ? * FRI *", updateCheck) // Cron schedule - How often to perform the update check - (This example is 8am every Friday)
updateCheck()
}
def updateCheck(){
setVersion()
def paramsUD = [uri: "https://hubitatcommunity.github.io/HoneywellThermo-TCC/versions.json" ] // This is the URI & path to your hosted JSON file
try {
httpGet(paramsUD) { respUD ->
// log.warn " Version Checking - Response Data: ${respUD.data}" // Troubleshooting Debug Code - Uncommenting this line should show the JSON response from your webserver
def copyrightRead = (respUD.data.copyright)
state.Copyright = copyrightRead
def newVerRaw = (respUD.data.versions.Driver.(state.InternalName))
def newVer = (respUD.data.versions.Driver.(state.InternalName).replace(".", ""))
def currentVer = state.Version.replace(".", "")
state.UpdateInfo = (respUD.data.versions.UpdateInfo.Driver.(state.InternalName))
state.author = (respUD.data.author)
if(newVer == "NLS"){
state.Status = "** This driver is no longer supported by $state.author **"
log.warn "** This driver is no longer supported by $state.author **"
}
else if(currentVer < newVer){
state.Status = "New Version Available (Version: $newVerRaw)"
log.warn "** There is a newer version of this driver available (Version: $newVerRaw) **"
log.warn "** $state.UpdateInfo **"
}
else if(currentVer > newVer){
state.Status = "You are using a Test version of this Driver (Version: $newVerRaw)"
} else {
state.Status = "Current"
logInfo "You are using the current version of this driver"
}
}
}
catch (e) {
log.warn "Something went wrong: CHECK THE JSON FILE AND IT'S URI - $e"
}
if(state.Status == "Current"){
state.UpdateInfo = "N/A"
sendEvent(name: "DriverUpdate", value: state.UpdateInfo)
sendEvent(name: "DriverStatus", value: state.Status)
} else {
sendEvent(name: "DriverUpdate", value: state.UpdateInfo)
sendEvent(name: "DriverStatus", value: state.Status)
}
sendEvent(name: "DriverAuthor", value: state.author)
sendEvent(name: "DriverVersion", value: state.Version)
}