(kicad_pcb (version 20171130) (host pcbnew "(5.1.4)-1") (general (thickness 1.6) (drawings 28) (tracks 323) (zones 0) (modules 30) (nets 43) ) (page A4) (layers (0 F.Cu signal) (31 B.Cu signal) (32 B.Adhes user hide) (33 F.Adhes user hide) (34 B.Paste user hide) (35 F.Paste user hide) (36 B.SilkS user) (37 F.SilkS user) (38 B.Mask user) (39 F.Mask user) (40 Dwgs.User user) (41 Cmts.User user hide) (42 Eco1.User user hide) (43 Eco2.User user hide) (44 Edge.Cuts user) (45 Margin user hide) (46 B.CrtYd user hide) (47 F.CrtYd user hide) (48 B.Fab user hide) (49 F.Fab user hide) ) (setup (last_trace_width 0.25) (trace_clearance 0.381) (zone_clearance 0.508) (zone_45_only no) (trace_min 0.2) (via_size 0.8) (via_drill 0.4) (via_min_size 0.4) (via_min_drill 0.3) (uvia_size 0.3) (uvia_drill 0.1) (uvias_allowed no) (uvia_min_size 0.2) (uvia_min_drill 0.1) (edge_width 0.05) (segment_width 0.2) (pcb_text_width 0.3) (pcb_text_size 1.5 1.5) (mod_edge_width 0.12) (mod_text_size 1 1) (mod_text_width 0.15) (pad_size 5.08 5.08) (pad_drill 3.200001) (pad_to_mask_clearance 0.051) (solder_mask_min_width 0.25) (aux_axis_origin 0 0) (visible_elements 7FFDFFFF) (pcbplotparams (layerselection 0x010fc_ffffffff) (usegerberextensions false) (usegerberattributes false) (usegerberadvancedattributes false) (creategerberjobfile false) (excludeedgelayer true) (linewidth 0.100000) (plotframeref false) (viasonmask false) (mode 1) (useauxorigin false) (hpglpennumber 1) (hpglpenspeed 20) (hpglpendiameter 15.000000) (psnegative false) (psa4output false) (plotreference true) (plotvalue true) (plotinvisibletext false) (padsonsilk false) (subtractmaskfromsilk false) (outputformat 1) (mirror false) (drillshape 1) (scaleselection 1) (outputdirectory "")) ) (net 0 "") (net 1 "Net-(D3-Pad1)") (net 2 /ESP_GND) (net 3 "Net-(D3-Pad3)") (net 4 "Net-(D4-Pad3)") (net 5 "Net-(D4-Pad1)") (net 6 /ESP_3V3) (net 7 /CS) (net 8 /~R1) (net 9 /BUSY) (net 10 /~G1) (net 11 /~R2) (net 12 /~G2) (net 13 /RST) (net 14 "Net-(ESP321-Pad27)") (net 15 "Net-(ESP321-Pad28)") (net 16 /DC) (net 17 "Net-(ESP321-Pad30)") (net 18 /DIN) (net 19 "Net-(ESP321-Pad12)") (net 20 /CLK) (net 21 "Net-(ESP321-Pad10)") (net 22 "Net-(ESP321-Pad7)") (net 23 "Net-(ESP321-Pad6)") (net 24 /BUTTON2) (net 25 /BUTTON1) (net 26 "Net-(ESP321-Pad3)") (net 27 "Net-(ESP321-Pad2)") (net 28 "Net-(ESP321-Pad1)") (net 29 /CANTX) (net 30 /GLV_RTN) (net 31 /GLV_5V) (net 32 /CANRX) (net 33 "Net-(U1-Pad5)") (net 34 /CAN_L) (net 35 /CAN_H) (net 36 /GLV_24V) (net 37 /ESP_BUTTON1) (net 38 /ESP_BUTTON2) (net 39 "Net-(R2-Pad2)") (net 40 "Net-(ESP321-Pad24)") (net 41 "Net-(ESP321-Pad25)") (net 42 /GLV_9V) (net_class Default "This is the default net class." (clearance 0.381) (trace_width 0.25) (via_dia 0.8) (via_drill 0.4) (uvia_dia 0.3) (uvia_drill 0.1) (add_net /BUSY) (add_net /BUTTON1) (add_net /BUTTON2) (add_net /CANRX) (add_net /CANTX) (add_net /CAN_H) (add_net /CAN_L) (add_net /CLK) (add_net /CS) (add_net /DC) (add_net /DIN) (add_net /ESP_3V3) (add_net /ESP_BUTTON1) (add_net /ESP_BUTTON2) (add_net /ESP_GND) (add_net /GLV_24V) (add_net /GLV_5V) (add_net /GLV_9V) (add_net /GLV_RTN) (add_net /RST) (add_net /~G1) (add_net /~G2) (add_net /~R1) (add_net /~R2) (add_net "Net-(D3-Pad1)") (add_net "Net-(D3-Pad3)") (add_net "Net-(D4-Pad1)") (add_net "Net-(D4-Pad3)") (add_net "Net-(ESP321-Pad1)") (add_net "Net-(ESP321-Pad10)") (add_net "Net-(ESP321-Pad12)") (add_net "Net-(ESP321-Pad2)") (add_net "Net-(ESP321-Pad24)") (add_net "Net-(ESP321-Pad25)") (add_net "Net-(ESP321-Pad27)") (add_net "Net-(ESP321-Pad28)") (add_net "Net-(ESP321-Pad3)") (add_net "Net-(ESP321-Pad30)") (add_net "Net-(ESP321-Pad6)") (add_net "Net-(ESP321-Pad7)") (add_net "Net-(R2-Pad2)") (add_net "Net-(U1-Pad5)") ) (module ESP32_Shield:ESP32_Devkit_DOIT_V1 (layer F.Cu) (tedit 5A56526C) (tstamp 5E3A2EEC) (at 101.6 73.66 270) (descr "Through hole straight pin header, 1x15, 2.54mm pitch, single row") (tags "Through hole pin header THT 1x15 2.54mm single row") (path /5E39D9F9) (fp_text reference ESP321 (at 14.45 -53 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value ESP32_Devkit_DOIT_V1 (at 13.65 1.3 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user GPIO23 (at 32.75 -46.5 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user GPIO22 (at 32.75 -44 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user GPIO1 (at 32.25 -41.5 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user GPIO3 (at 32.25 -39 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user GPIO21 (at 32.75 -36.5 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user GPIO19 (at 32.75 -34 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user GPIO18 (at 32.75 -31.5 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user GPIO5 (at 32.25 -28.75 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user GPIO17 (at 32.75 -26.25 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user GPIO16 (at 32.75 -23.75 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user GPIO4 (at 32.25 -21.25 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user GPIO2 (at 32.25 -18.75 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user GPIO15 (at 32.75 -16 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user 3V3 (at 31.5 -11 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user VIN (at -2.75 -11 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user GND (at 31.5 -13.5 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user GND (at -3 -13.5 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user GPIO13 (at -4.25 -16 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user GPIO12 (at -4.25 -18.5 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user GPIO14 (at -4.25 -21 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user GPIO27 (at -4.15 -23.55 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user GPIO26 (at -4.15 -26.2 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user GPIO25 (at -4.25 -29 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user GPIO33 (at -4.25 -31.5 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user GPIO32 (at -4.25 -34 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user GPIO35 (at -4.25 -36.5 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user GPIO34 (at -4.25 -39 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user GPIO39 (at -4.25 -41.5 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user GPIO36 (at -4.25 -44 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user EN (at -2.5 -46.5 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 28.3 -51.5) (end -0.05 -51.5) (layer F.SilkS) (width 0.15)) (fp_line (start 28.3 -42.9) (end 28.3 -51.45) (layer F.SilkS) (width 0.15)) (fp_line (start 0 -51.4) (end 0 0) (layer F.SilkS) (width 0.15)) (fp_line (start 0 0) (end 28.3 0) (layer F.SilkS) (width 0.15)) (fp_line (start 28.3 0) (end 28.3 -43) (layer F.SilkS) (width 0.15)) (fp_text user %R (at 27 -28.92) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 25.67 -48.03) (end 27 -48.03) (layer F.SilkS) (width 0.12)) (fp_line (start 25.67 -46.7) (end 25.67 -48.03) (layer F.SilkS) (width 0.12)) (fp_line (start 25.57 -45.03) (end 28.23 -45.03) (layer F.SilkS) (width 0.12)) (fp_line (start 28.23 -45.03) (end 28.23 -9.41) (layer F.SilkS) (width 0.12)) (fp_line (start 25.67 -45.43) (end 25.67 -9.81) (layer F.SilkS) (width 0.12)) (fp_line (start 25.57 -9.41) (end 28.23 -9.41) (layer F.SilkS) (width 0.12)) (fp_line (start 25.73 -47.335) (end 26.365 -47.97) (layer F.Fab) (width 0.1)) (fp_line (start 25.73 -9.87) (end 25.73 -47.335) (layer F.Fab) (width 0.1)) (fp_line (start 28.27 -9.47) (end 25.73 -9.47) (layer F.Fab) (width 0.1)) (fp_line (start 28.27 -47.57) (end 28.27 -9.47) (layer F.Fab) (width 0.1)) (fp_line (start 26.365 -47.57) (end 28.27 -47.57) (layer F.Fab) (width 0.1)) (fp_line (start 26.365 -47.57) (end 28.27 -47.57) (layer F.Fab) (width 0.1)) (fp_line (start 28.27 -47.57) (end 28.27 -9.47) (layer F.Fab) (width 0.1)) (fp_line (start 28.27 -9.47) (end 25.73 -9.47) (layer F.Fab) (width 0.1)) (fp_line (start 25.73 -9.87) (end 25.73 -47.335) (layer F.Fab) (width 0.1)) (fp_line (start 25.73 -47.335) (end 26.365 -47.97) (layer F.Fab) (width 0.1)) (fp_line (start 25.57 -9.41) (end 28.23 -9.41) (layer F.SilkS) (width 0.12)) (fp_line (start 25.67 -45.43) (end 25.67 -9.81) (layer F.SilkS) (width 0.12)) (fp_line (start 28.23 -45.03) (end 28.23 -9.41) (layer F.SilkS) (width 0.12)) (fp_line (start 25.57 -45.03) (end 28.23 -45.03) (layer F.SilkS) (width 0.12)) (fp_line (start 25.67 -46.7) (end 25.67 -48.03) (layer F.SilkS) (width 0.12)) (fp_line (start 25.67 -48.03) (end 27 -48.03) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 27 -28.92) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 1.3 -28.82) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -0.03 -47.93) (end 1.3 -47.93) (layer F.SilkS) (width 0.12)) (fp_line (start -0.03 -46.6) (end -0.03 -47.93) (layer F.SilkS) (width 0.12)) (fp_line (start -0.03 -45.33) (end 2.63 -45.33) (layer F.SilkS) (width 0.12)) (fp_line (start 2.63 -45.33) (end 2.63 -9.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.03 -45.33) (end -0.03 -9.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.03 -9.71) (end 2.63 -9.71) (layer F.SilkS) (width 0.12)) (fp_line (start 0.03 -47.235) (end 0.665 -47.87) (layer F.Fab) (width 0.1)) (fp_line (start 0.03 -9.77) (end 0.03 -47.235) (layer F.Fab) (width 0.1)) (fp_line (start 2.57 -9.77) (end 0.03 -9.77) (layer F.Fab) (width 0.1)) (fp_line (start 2.57 -47.87) (end 2.57 -9.77) (layer F.Fab) (width 0.1)) (fp_line (start 0.665 -47.87) (end 2.57 -47.87) (layer F.Fab) (width 0.1)) (fp_line (start 0.665 -47.87) (end 2.57 -47.87) (layer F.Fab) (width 0.1)) (fp_line (start 2.57 -47.87) (end 2.57 -9.77) (layer F.Fab) (width 0.1)) (fp_line (start 2.57 -9.77) (end 0.03 -9.77) (layer F.Fab) (width 0.1)) (fp_line (start 0.03 -9.77) (end 0.03 -47.235) (layer F.Fab) (width 0.1)) (fp_line (start 0.03 -47.235) (end 0.665 -47.87) (layer F.Fab) (width 0.1)) (fp_line (start -0.03 -9.71) (end 2.63 -9.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.03 -45.33) (end -0.03 -9.71) (layer F.SilkS) (width 0.12)) (fp_line (start 2.63 -45.33) (end 2.63 -9.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.03 -45.33) (end 2.63 -45.33) (layer F.SilkS) (width 0.12)) (fp_line (start -0.03 -46.6) (end -0.03 -47.93) (layer F.SilkS) (width 0.12)) (fp_line (start -0.03 -47.93) (end 1.3 -47.93) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 1.3 -28.82) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 16 thru_hole oval (at 27 -11.14 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 6 /ESP_3V3)) (pad 17 thru_hole oval (at 27 -13.68 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 /ESP_GND)) (pad 18 thru_hole oval (at 27 -16.22 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 7 /CS)) (pad 19 thru_hole oval (at 27 -18.76 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 8 /~R1)) (pad 20 thru_hole oval (at 27 -21.3 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 29 /CANTX)) (pad 21 thru_hole oval (at 27 -23.84 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 9 /BUSY)) (pad 22 thru_hole oval (at 27 -26.38 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 10 /~G1)) (pad 23 thru_hole oval (at 27 -28.92 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 32 /CANRX)) (pad 24 thru_hole oval (at 27 -31.46 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 40 "Net-(ESP321-Pad24)")) (pad 25 thru_hole oval (at 27 -34 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 41 "Net-(ESP321-Pad25)")) (pad 26 thru_hole oval (at 27 -36.54 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 13 /RST)) (pad 27 thru_hole oval (at 27 -39.08 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 14 "Net-(ESP321-Pad27)")) (pad 28 thru_hole oval (at 27 -41.62 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 15 "Net-(ESP321-Pad28)")) (pad 29 thru_hole oval (at 27 -44.16 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 16 /DC)) (pad 30 thru_hole rect (at 27 -46.7 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 17 "Net-(ESP321-Pad30)")) (pad 30 thru_hole rect (at 27 -46.7 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 17 "Net-(ESP321-Pad30)")) (pad 29 thru_hole oval (at 27 -44.16 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 16 /DC)) (pad 28 thru_hole oval (at 27 -41.62 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 15 "Net-(ESP321-Pad28)")) (pad 27 thru_hole oval (at 27 -39.08 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 14 "Net-(ESP321-Pad27)")) (pad 26 thru_hole oval (at 27 -36.54 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 13 /RST)) (pad 25 thru_hole oval (at 27 -34 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 41 "Net-(ESP321-Pad25)")) (pad 24 thru_hole oval (at 27 -31.46 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 40 "Net-(ESP321-Pad24)")) (pad 23 thru_hole oval (at 27 -28.92 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 32 /CANRX)) (pad 22 thru_hole oval (at 27 -26.38 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 10 /~G1)) (pad 21 thru_hole oval (at 27 -23.84 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 9 /BUSY)) (pad 20 thru_hole oval (at 27 -21.3 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 29 /CANTX)) (pad 19 thru_hole oval (at 27 -18.76 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 8 /~R1)) (pad 18 thru_hole oval (at 27 -16.22 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 7 /CS)) (pad 17 thru_hole oval (at 27 -13.68 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 /ESP_GND)) (pad 16 thru_hole oval (at 27 -11.14 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 6 /ESP_3V3)) (pad 15 thru_hole oval (at 1.3 -11.04 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 42 /GLV_9V)) (pad 14 thru_hole oval (at 1.3 -13.58 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 30 /GLV_RTN)) (pad 13 thru_hole oval (at 1.3 -16.12 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 18 /DIN)) (pad 12 thru_hole oval (at 1.3 -18.66 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 19 "Net-(ESP321-Pad12)")) (pad 11 thru_hole oval (at 1.3 -21.2 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 20 /CLK)) (pad 10 thru_hole oval (at 1.3 -23.74 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 21 "Net-(ESP321-Pad10)")) (pad 9 thru_hole oval (at 1.3 -26.28 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 12 /~G2)) (pad 8 thru_hole oval (at 1.3 -28.82 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 11 /~R2)) (pad 7 thru_hole oval (at 1.3 -31.36 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 22 "Net-(ESP321-Pad7)")) (pad 6 thru_hole oval (at 1.3 -33.9 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 23 "Net-(ESP321-Pad6)")) (pad 5 thru_hole oval (at 1.3 -36.44 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 38 /ESP_BUTTON2)) (pad 4 thru_hole oval (at 1.3 -38.98 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 37 /ESP_BUTTON1)) (pad 3 thru_hole oval (at 1.3 -41.52 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 26 "Net-(ESP321-Pad3)")) (pad 2 thru_hole oval (at 1.3 -44.06 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 27 "Net-(ESP321-Pad2)")) (pad 1 thru_hole rect (at 1.3 -46.6 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 28 "Net-(ESP321-Pad1)")) (pad 1 thru_hole rect (at 1.3 -46.6 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 28 "Net-(ESP321-Pad1)")) (pad 2 thru_hole oval (at 1.3 -44.06 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 27 "Net-(ESP321-Pad2)")) (pad 3 thru_hole oval (at 1.3 -41.52 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 26 "Net-(ESP321-Pad3)")) (pad 4 thru_hole oval (at 1.3 -38.98 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 37 /ESP_BUTTON1)) (pad 5 thru_hole oval (at 1.3 -36.44 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 38 /ESP_BUTTON2)) (pad 6 thru_hole oval (at 1.3 -33.9 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 23 "Net-(ESP321-Pad6)")) (pad 7 thru_hole oval (at 1.3 -31.36 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 22 "Net-(ESP321-Pad7)")) (pad 8 thru_hole oval (at 1.3 -28.82 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 11 /~R2)) (pad 9 thru_hole oval (at 1.3 -26.28 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 12 /~G2)) (pad 10 thru_hole oval (at 1.3 -23.74 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 21 "Net-(ESP321-Pad10)")) (pad 11 thru_hole oval (at 1.3 -21.2 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 20 /CLK)) (pad 12 thru_hole oval (at 1.3 -18.66 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 19 "Net-(ESP321-Pad12)")) (pad 13 thru_hole oval (at 1.3 -16.12 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 18 /DIN)) (pad 14 thru_hole oval (at 1.3 -13.58 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 30 /GLV_RTN)) (pad 15 thru_hole oval (at 1.3 -11.04 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 42 /GLV_9V)) (model ${KISYS3DMOD}/Pin_Headers.3dshapes/Pin_Header_Straight_1x15_Pitch2.54mm.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_JST:JST_PH_S8B-PH-SM4-TB_1x08-1MP_P2.00mm_Horizontal (layer F.Cu) (tedit 5B78AD87) (tstamp 5E49C2CE) (at 68.27 79.74 270) (descr "JST PH series connector, S8B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator") (tags "connector JST PH top entry") (path /5DD793FC) (attr smd) (fp_text reference J2 (at 0 -5.8 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value Display (at 0 5.8 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -9.95 -3.2) (end -9.15 -3.2) (layer F.Fab) (width 0.1)) (fp_line (start -9.15 -3.2) (end -9.15 -1.6) (layer F.Fab) (width 0.1)) (fp_line (start -9.15 -1.6) (end 9.15 -1.6) (layer F.Fab) (width 0.1)) (fp_line (start 9.15 -1.6) (end 9.15 -3.2) (layer F.Fab) (width 0.1)) (fp_line (start 9.15 -3.2) (end 9.95 -3.2) (layer F.Fab) (width 0.1)) (fp_line (start -10.06 0.94) (end -10.06 -3.31) (layer F.SilkS) (width 0.12)) (fp_line (start -10.06 -3.31) (end -9.04 -3.31) (layer F.SilkS) (width 0.12)) (fp_line (start -9.04 -3.31) (end -9.04 -1.71) (layer F.SilkS) (width 0.12)) (fp_line (start -9.04 -1.71) (end -7.76 -1.71) (layer F.SilkS) (width 0.12)) (fp_line (start -7.76 -1.71) (end -7.76 -4.6) (layer F.SilkS) (width 0.12)) (fp_line (start 10.06 0.94) (end 10.06 -3.31) (layer F.SilkS) (width 0.12)) (fp_line (start 10.06 -3.31) (end 9.04 -3.31) (layer F.SilkS) (width 0.12)) (fp_line (start 9.04 -3.31) (end 9.04 -1.71) (layer F.SilkS) (width 0.12)) (fp_line (start 9.04 -1.71) (end 7.76 -1.71) (layer F.SilkS) (width 0.12)) (fp_line (start -8.34 4.51) (end 8.34 4.51) (layer F.SilkS) (width 0.12)) (fp_line (start -9.95 4.4) (end 9.95 4.4) (layer F.Fab) (width 0.1)) (fp_line (start -9.95 -3.2) (end -9.95 4.4) (layer F.Fab) (width 0.1)) (fp_line (start 9.95 -3.2) (end 9.95 4.4) (layer F.Fab) (width 0.1)) (fp_line (start -10.6 -5.1) (end -10.6 5.1) (layer F.CrtYd) (width 0.05)) (fp_line (start -10.6 5.1) (end 10.6 5.1) (layer F.CrtYd) (width 0.05)) (fp_line (start 10.6 5.1) (end 10.6 -5.1) (layer F.CrtYd) (width 0.05)) (fp_line (start 10.6 -5.1) (end -10.6 -5.1) (layer F.CrtYd) (width 0.05)) (fp_line (start -7.5 -1.6) (end -7 -0.892893) (layer F.Fab) (width 0.1)) (fp_line (start -7 -0.892893) (end -6.5 -1.6) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 1.5 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 1 smd roundrect (at -7 -2.85 270) (size 1 3.5) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 6 /ESP_3V3)) (pad 2 smd roundrect (at -5 -2.85 270) (size 1 3.5) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 /ESP_GND)) (pad 3 smd roundrect (at -3 -2.85 270) (size 1 3.5) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 18 /DIN)) (pad 4 smd roundrect (at -1 -2.85 270) (size 1 3.5) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 20 /CLK)) (pad 5 smd roundrect (at 1 -2.85 270) (size 1 3.5) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 7 /CS)) (pad 6 smd roundrect (at 3 -2.85 270) (size 1 3.5) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 16 /DC)) (pad 7 smd roundrect (at 5 -2.85 270) (size 1 3.5) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 13 /RST)) (pad 8 smd roundrect (at 7 -2.85 270) (size 1 3.5) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 9 /BUSY)) (pad MP smd roundrect (at -9.35 2.9 270) (size 1.5 3.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.166667)) (pad MP smd roundrect (at 9.35 2.9 270) (size 1.5 3.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.166667)) (model ${KISYS3DMOD}/Connector_JST.3dshapes/JST_PH_S8B-PH-SM4-TB_1x08-1MP_P2.00mm_Horizontal.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Lafayette_Electric_Car_Footprints:PushButton (layer B.Cu) (tedit 5DD2EDD8) (tstamp 5E3A2E25) (at 198.91 87.63) (path /5E48D04A) (fp_text reference BTN1 (at -4.6 4.5) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value PushButton (at 3.6 4.5) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_line (start 5.8 -3.3) (end -5.8 3.3) (layer Dwgs.User) (width 0.12)) (fp_line (start -5.8 -3.3) (end 5.8 3.3) (layer Dwgs.User) (width 0.12)) (fp_line (start -5.8 -3.3) (end 5.8 -3.3) (layer B.SilkS) (width 0.12)) (fp_line (start -5.8 3.3) (end 5.8 3.3) (layer B.SilkS) (width 0.12)) (pad 2 smd rect (at 4.575 2.2) (size 2.85 1.4) (layers B.Cu B.Paste B.Mask) (net 25 /BUTTON1)) (pad 2 smd rect (at 4.575 -2.3) (size 2.85 1.4) (layers B.Cu B.Paste B.Mask) (net 25 /BUTTON1)) (pad 1 smd rect (at -4.6 -2.3) (size 2.85 1.4) (layers B.Cu B.Paste B.Mask) (net 2 /ESP_GND)) (pad 1 smd rect (at -4.6 2.2) (size 2.85 1.4) (layers B.Cu B.Paste B.Mask) (net 2 /ESP_GND)) (model ${KIPRJMOD}/3dModels/ButtonMount.step (offset (xyz 0 2.5 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) (model ${KIPRJMOD}/3dModels/ButtonCap.step (offset (xyz 0 0 4)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Lafayette_Electric_Car_Footprints:PushButton (layer B.Cu) (tedit 5DD2EDD8) (tstamp 5E3A2E31) (at 181.13 87.63) (path /5E48FC6E) (fp_text reference BTN2 (at -4.6 4.5) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value PushButton (at 3.6 4.5) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_line (start -5.8 3.3) (end 5.8 3.3) (layer B.SilkS) (width 0.12)) (fp_line (start -5.8 -3.3) (end 5.8 -3.3) (layer B.SilkS) (width 0.12)) (fp_line (start -5.8 -3.3) (end 5.8 3.3) (layer Dwgs.User) (width 0.12)) (fp_line (start 5.8 -3.3) (end -5.8 3.3) (layer Dwgs.User) (width 0.12)) (pad 1 smd rect (at -4.6 2.2) (size 2.85 1.4) (layers B.Cu B.Paste B.Mask) (net 2 /ESP_GND)) (pad 1 smd rect (at -4.6 -2.3) (size 2.85 1.4) (layers B.Cu B.Paste B.Mask) (net 2 /ESP_GND)) (pad 2 smd rect (at 4.575 -2.3) (size 2.85 1.4) (layers B.Cu B.Paste B.Mask) (net 24 /BUTTON2)) (pad 2 smd rect (at 4.575 2.2) (size 2.85 1.4) (layers B.Cu B.Paste B.Mask) (net 24 /BUTTON2)) (model ${KIPRJMOD}/3dModels/ButtonMount.step (offset (xyz 0 2.5 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) (model ${KIPRJMOD}/3dModels/ButtonCap.step (offset (xyz 0 0 4)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module LED_THT:LED_D5.0mm-3 (layer B.Cu) (tedit 587A3A7B) (tstamp 5E3A2E45) (at 180.34 76.2) (descr "LED, diameter 5.0mm, 2 pins, diameter 5.0mm, 3 pins, http://www.kingbright.com/attachments/file/psearch/000/00/00/L-59EGC(Ver.17A).pdf") (tags "LED diameter 5.0mm 2 pins diameter 5.0mm 3 pins") (path /5E3A3924) (fp_text reference D3 (at 2.54 3.96) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value LED_Dual_ACA (at 2.54 -3.96) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_arc (start 2.54 0) (end 0.04 1.469694) (angle -299.1) (layer B.Fab) (width 0.1)) (fp_arc (start 2.54 0) (end -0.02 1.54483) (angle -127.7) (layer B.SilkS) (width 0.12)) (fp_arc (start 2.54 0) (end -0.02 -1.54483) (angle 127.7) (layer B.SilkS) (width 0.12)) (fp_arc (start 2.54 0) (end 0.285316 1.08) (angle -128.8) (layer B.SilkS) (width 0.12)) (fp_arc (start 2.54 0) (end 0.285316 -1.08) (angle 128.8) (layer B.SilkS) (width 0.12)) (fp_circle (center 2.54 0) (end 5.04 0) (layer B.Fab) (width 0.1)) (fp_line (start 0.04 1.469694) (end 0.04 -1.469694) (layer B.Fab) (width 0.1)) (fp_line (start -0.02 1.545) (end -0.02 1.08) (layer B.SilkS) (width 0.12)) (fp_line (start -0.02 -1.08) (end -0.02 -1.545) (layer B.SilkS) (width 0.12)) (fp_line (start -1.15 3.25) (end -1.15 -3.25) (layer B.CrtYd) (width 0.05)) (fp_line (start -1.15 -3.25) (end 6.25 -3.25) (layer B.CrtYd) (width 0.05)) (fp_line (start 6.25 -3.25) (end 6.25 3.25) (layer B.CrtYd) (width 0.05)) (fp_line (start 6.25 3.25) (end -1.15 3.25) (layer B.CrtYd) (width 0.05)) (pad 1 thru_hole rect (at 0 0) (size 1.8 1.8) (drill 0.9) (layers *.Cu *.Mask) (net 1 "Net-(D3-Pad1)")) (pad 2 thru_hole circle (at 2.54 0) (size 1.8 1.8) (drill 0.9) (layers *.Cu *.Mask) (net 2 /ESP_GND)) (pad 3 thru_hole circle (at 5.08 0) (size 1.8 1.8) (drill 0.9) (layers *.Cu *.Mask) (net 3 "Net-(D3-Pad3)")) (model ${KISYS3DMOD}/LED_THT.3dshapes/LED_D5.0mm-3.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module LED_THT:LED_D5.0mm-3 (layer B.Cu) (tedit 587A3A7B) (tstamp 5E3A2E59) (at 180.34 100.33) (descr "LED, diameter 5.0mm, 2 pins, diameter 5.0mm, 3 pins, http://www.kingbright.com/attachments/file/psearch/000/00/00/L-59EGC(Ver.17A).pdf") (tags "LED diameter 5.0mm 2 pins diameter 5.0mm 3 pins") (path /5E3A4DF7) (fp_text reference D4 (at 2.54 3.96) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value LED_Dual_ACA (at 2.54 -3.96) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_line (start 6.25 3.25) (end -1.15 3.25) (layer B.CrtYd) (width 0.05)) (fp_line (start 6.25 -3.25) (end 6.25 3.25) (layer B.CrtYd) (width 0.05)) (fp_line (start -1.15 -3.25) (end 6.25 -3.25) (layer B.CrtYd) (width 0.05)) (fp_line (start -1.15 3.25) (end -1.15 -3.25) (layer B.CrtYd) (width 0.05)) (fp_line (start -0.02 -1.08) (end -0.02 -1.545) (layer B.SilkS) (width 0.12)) (fp_line (start -0.02 1.545) (end -0.02 1.08) (layer B.SilkS) (width 0.12)) (fp_line (start 0.04 1.469694) (end 0.04 -1.469694) (layer B.Fab) (width 0.1)) (fp_circle (center 2.54 0) (end 5.04 0) (layer B.Fab) (width 0.1)) (fp_arc (start 2.54 0) (end 0.285316 -1.08) (angle 128.8) (layer B.SilkS) (width 0.12)) (fp_arc (start 2.54 0) (end 0.285316 1.08) (angle -128.8) (layer B.SilkS) (width 0.12)) (fp_arc (start 2.54 0) (end -0.02 -1.54483) (angle 127.7) (layer B.SilkS) (width 0.12)) (fp_arc (start 2.54 0) (end -0.02 1.54483) (angle -127.7) (layer B.SilkS) (width 0.12)) (fp_arc (start 2.54 0) (end 0.04 1.469694) (angle -299.1) (layer B.Fab) (width 0.1)) (pad 3 thru_hole circle (at 5.08 0) (size 1.8 1.8) (drill 0.9) (layers *.Cu *.Mask) (net 4 "Net-(D4-Pad3)")) (pad 2 thru_hole circle (at 2.54 0) (size 1.8 1.8) (drill 0.9) (layers *.Cu *.Mask) (net 2 /ESP_GND)) (pad 1 thru_hole rect (at 0 0) (size 1.8 1.8) (drill 0.9) (layers *.Cu *.Mask) (net 5 "Net-(D4-Pad1)")) (model ${KISYS3DMOD}/LED_THT.3dshapes/LED_D5.0mm-3.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Package_SO:SOIC-8_3.9x4.9mm_P1.27mm (layer F.Cu) (tedit 5C97300E) (tstamp 5E3A2F06) (at 129.54 87.63 90) (descr "SOIC, 8 Pin (JEDEC MS-012AA, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/soic_narrow-r/r_8.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py") (tags "SOIC SO") (path /5DD84DD1) (attr smd) (fp_text reference U1 (at 0 -3.4 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value MCP2551-I-SN (at 0 3.4 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 0 2.56) (end 1.95 2.56) (layer F.SilkS) (width 0.12)) (fp_line (start 0 2.56) (end -1.95 2.56) (layer F.SilkS) (width 0.12)) (fp_line (start 0 -2.56) (end 1.95 -2.56) (layer F.SilkS) (width 0.12)) (fp_line (start 0 -2.56) (end -3.45 -2.56) (layer F.SilkS) (width 0.12)) (fp_line (start -0.975 -2.45) (end 1.95 -2.45) (layer F.Fab) (width 0.1)) (fp_line (start 1.95 -2.45) (end 1.95 2.45) (layer F.Fab) (width 0.1)) (fp_line (start 1.95 2.45) (end -1.95 2.45) (layer F.Fab) (width 0.1)) (fp_line (start -1.95 2.45) (end -1.95 -1.475) (layer F.Fab) (width 0.1)) (fp_line (start -1.95 -1.475) (end -0.975 -2.45) (layer F.Fab) (width 0.1)) (fp_line (start -3.7 -2.7) (end -3.7 2.7) (layer F.CrtYd) (width 0.05)) (fp_line (start -3.7 2.7) (end 3.7 2.7) (layer F.CrtYd) (width 0.05)) (fp_line (start 3.7 2.7) (end 3.7 -2.7) (layer F.CrtYd) (width 0.05)) (fp_line (start 3.7 -2.7) (end -3.7 -2.7) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.98 0.98) (thickness 0.15))) ) (pad 1 smd roundrect (at -2.475 -1.905 90) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 29 /CANTX)) (pad 2 smd roundrect (at -2.475 -0.635 90) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 30 /GLV_RTN)) (pad 3 smd roundrect (at -2.475 0.635 90) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 31 /GLV_5V)) (pad 4 smd roundrect (at -2.475 1.905 90) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 32 /CANRX)) (pad 5 smd roundrect (at 2.475 1.905 90) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 33 "Net-(U1-Pad5)")) (pad 6 smd roundrect (at 2.475 0.635 90) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 34 /CAN_L)) (pad 7 smd roundrect (at 2.475 -0.635 90) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 35 /CAN_H)) (pad 8 smd roundrect (at 2.475 -1.905 90) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 39 "Net-(R2-Pad2)")) (model ${KISYS3DMOD}/Package_SO.3dshapes/SOIC-8_3.9x4.9mm_P1.27mm.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Lafayette_Electric_Car_Footprints:VX7805-500 (layer F.Cu) (tedit 5DCDEE17) (tstamp 5E3A2F16) (at 90.17 96.52 270) (path /5DD5D737) (fp_text reference U2 (at 0 -5.334 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value V7805-500 (at 0 4.826 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -6.223 -4.445) (end 6.223 -4.445) (layer Eco1.User) (width 0.05)) (fp_line (start 6.223 -4.445) (end 6.223 3.937) (layer Eco1.User) (width 0.05)) (fp_line (start 6.223 3.937) (end -6.223 3.937) (layer Eco1.User) (width 0.05)) (fp_line (start -6.223 3.937) (end -6.223 -4.445) (layer Eco1.User) (width 0.05)) (fp_line (start -5.969 -4.191) (end 5.969 -4.191) (layer F.SilkS) (width 0.127)) (fp_line (start 5.969 -4.191) (end 5.969 3.683) (layer F.SilkS) (width 0.127)) (fp_line (start 5.969 3.683) (end -5.969 3.683) (layer F.SilkS) (width 0.127)) (fp_line (start -5.969 3.683) (end -5.969 -4.191) (layer F.SilkS) (width 0.127)) (fp_circle (center -2.543 1.645) (end -2.443 1.645) (layer Eco2.User) (width 0.35)) (pad 1 thru_hole rect (at -2.54 1.625 270) (size 1.508 1.508) (drill 1) (layers *.Cu *.Mask) (net 36 /GLV_24V)) (pad 2 thru_hole circle (at 0 1.625 270) (size 1.508 1.508) (drill 1) (layers *.Cu *.Mask) (net 30 /GLV_RTN)) (pad 3 thru_hole circle (at 2.54 1.625 270) (size 1.508 1.508) (drill 1) (layers *.Cu *.Mask) (net 31 /GLV_5V)) (model ${KIPRJMOD}/3DModels/CUI_V7805-500.step (offset (xyz 0 0.35 0)) (scale (xyz 1 1 1)) (rotate (xyz -90 0 0)) ) ) (module Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder (layer F.Cu) (tedit 5B36C52B) (tstamp 5E49C231) (at 97.028 92.964 270) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (path /5DD5E24C) (attr smd) (fp_text reference C2 (at 0 -1.65 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 10u (at 0 1.65 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.261252 -0.71) (end 0.261252 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.261252 0.71) (end 0.261252 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.85 0.95) (end -1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.85 -0.95) (end 1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.85 -0.95) (end 1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.85 0.95) (end -1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (pad 1 smd roundrect (at -1.025 0 270) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391) (net 36 /GLV_24V)) (pad 2 smd roundrect (at 1.025 0 270) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391) (net 30 /GLV_RTN)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder (layer F.Cu) (tedit 5B36C52B) (tstamp 5E49C242) (at 97.028 98.552 90) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (path /5DD5DF3D) (attr smd) (fp_text reference C3 (at 0 -1.65 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 22u (at 0 1.65 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start 1.85 0.95) (end -1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.85 -0.95) (end 1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.85 -0.95) (end 1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.85 0.95) (end -1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.261252 0.71) (end 0.261252 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.261252 -0.71) (end 0.261252 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (pad 2 smd roundrect (at 1.025 0 90) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391) (net 30 /GLV_RTN)) (pad 1 smd roundrect (at -1.025 0 90) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391) (net 31 /GLV_5V)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder (layer F.Cu) (tedit 5B36C52B) (tstamp 5E49C253) (at 165.1 92.71) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (path /5E493D4C) (attr smd) (fp_text reference C5 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value .1u (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.261252 -0.71) (end 0.261252 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.261252 0.71) (end 0.261252 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.85 0.95) (end -1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.85 -0.95) (end 1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.85 -0.95) (end 1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.85 0.95) (end -1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (pad 1 smd roundrect (at -1.025 0) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391) (net 37 /ESP_BUTTON1)) (pad 2 smd roundrect (at 1.025 0) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391) (net 30 /GLV_RTN)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder (layer F.Cu) (tedit 5B36C52B) (tstamp 5E49C264) (at 165.345 81.28) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (path /5E4A7A25) (attr smd) (fp_text reference C6 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value .1u (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start 1.85 0.95) (end -1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.85 -0.95) (end 1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.85 -0.95) (end 1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.85 0.95) (end -1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.261252 0.71) (end 0.261252 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.261252 -0.71) (end 0.261252 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (pad 2 smd roundrect (at 1.025 0) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391) (net 30 /GLV_RTN)) (pad 1 smd roundrect (at -1.025 0) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391) (net 38 /ESP_BUTTON2)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module MountingHole:MountingHole_3.2mm_M3 (layer F.Cu) (tedit 5E4C44E0) (tstamp 5E49C26C) (at 83.82 71.12) (descr "Mounting Hole 3.2mm, no annular, M3") (tags "mounting hole 3.2mm no annular m3") (path /5E5587CE) (attr virtual) (fp_text reference H1 (at 0 -4.2) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value MountingHole (at 0 4.2) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0.3 0) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_circle (center 0 0) (end 3.2 0) (layer Cmts.User) (width 0.15)) (fp_circle (center 0 0) (end 3.45 0) (layer F.CrtYd) (width 0.05)) (pad "" thru_hole circle (at -0.254 -0.254) (size 5.08 5.08) (drill 3.200001) (layers *.Cu *.Mask)) ) (module MountingHole:MountingHole_3.2mm_M3 (layer F.Cu) (tedit 5E4C44C9) (tstamp 5E49C274) (at 168.91 71.12) (descr "Mounting Hole 3.2mm, no annular, M3") (tags "mounting hole 3.2mm no annular m3") (path /5E55ADD8) (attr virtual) (fp_text reference H2 (at 0 -4.2) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value MountingHole (at 0 4.2) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_circle (center 0 0) (end 3.45 0) (layer F.CrtYd) (width 0.05)) (fp_circle (center 0 0) (end 3.2 0) (layer Cmts.User) (width 0.15)) (fp_text user %R (at 0.3 0) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad "" thru_hole circle (at -0.254 -0.254) (size 5.08 5.08) (drill 3.200001) (layers *.Cu *.Mask)) ) (module MountingHole:MountingHole_3.2mm_M3 (layer F.Cu) (tedit 5E4C44D3) (tstamp 5E49C27C) (at 168.91 104.14) (descr "Mounting Hole 3.2mm, no annular, M3") (tags "mounting hole 3.2mm no annular m3") (path /5E55D975) (attr virtual) (fp_text reference H3 (at 0 -4.2) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value MountingHole (at 0 4.2) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0.3 0) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_circle (center 0 0) (end 3.2 0) (layer Cmts.User) (width 0.15)) (fp_circle (center 0 0) (end 3.45 0) (layer F.CrtYd) (width 0.05)) (pad "" thru_hole circle (at -0.254 0.5334) (size 5.08 5.08) (drill 3.200001) (layers *.Cu *.Mask)) ) (module MountingHole:MountingHole_3.2mm_M3 (layer F.Cu) (tedit 5E4C44E9) (tstamp 5E49C284) (at 83.82 104.14) (descr "Mounting Hole 3.2mm, no annular, M3") (tags "mounting hole 3.2mm no annular m3") (path /5E560686) (attr virtual) (fp_text reference H4 (at 0 -4.2) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value MountingHole (at 0 4.2) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_circle (center 0 0) (end 3.45 0) (layer F.CrtYd) (width 0.05)) (fp_circle (center 0 0) (end 3.2 0) (layer Cmts.User) (width 0.15)) (fp_text user %R (at 0.3 0) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad "" thru_hole circle (at -0.254 0.5334) (size 5.08 5.08) (drill 3.200001) (layers *.Cu *.Mask)) ) (module Connector_JST:JST_PH_S4B-PH-SM4-TB_1x04-1MP_P2.00mm_Horizontal (layer F.Cu) (tedit 5B78AD87) (tstamp 5E49C2A7) (at 68.58 99.822 270) (descr "JST PH series connector, S4B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator") (tags "connector JST PH top entry") (path /5DD5E7D7) (attr smd) (fp_text reference J1 (at 0 -5.8 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value GLV/CAN (at 0 5.8 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -5.95 -3.2) (end -5.15 -3.2) (layer F.Fab) (width 0.1)) (fp_line (start -5.15 -3.2) (end -5.15 -1.6) (layer F.Fab) (width 0.1)) (fp_line (start -5.15 -1.6) (end 5.15 -1.6) (layer F.Fab) (width 0.1)) (fp_line (start 5.15 -1.6) (end 5.15 -3.2) (layer F.Fab) (width 0.1)) (fp_line (start 5.15 -3.2) (end 5.95 -3.2) (layer F.Fab) (width 0.1)) (fp_line (start -6.06 0.94) (end -6.06 -3.31) (layer F.SilkS) (width 0.12)) (fp_line (start -6.06 -3.31) (end -5.04 -3.31) (layer F.SilkS) (width 0.12)) (fp_line (start -5.04 -3.31) (end -5.04 -1.71) (layer F.SilkS) (width 0.12)) (fp_line (start -5.04 -1.71) (end -3.76 -1.71) (layer F.SilkS) (width 0.12)) (fp_line (start -3.76 -1.71) (end -3.76 -4.6) (layer F.SilkS) (width 0.12)) (fp_line (start 6.06 0.94) (end 6.06 -3.31) (layer F.SilkS) (width 0.12)) (fp_line (start 6.06 -3.31) (end 5.04 -3.31) (layer F.SilkS) (width 0.12)) (fp_line (start 5.04 -3.31) (end 5.04 -1.71) (layer F.SilkS) (width 0.12)) (fp_line (start 5.04 -1.71) (end 3.76 -1.71) (layer F.SilkS) (width 0.12)) (fp_line (start -4.34 4.51) (end 4.34 4.51) (layer F.SilkS) (width 0.12)) (fp_line (start -5.95 4.4) (end 5.95 4.4) (layer F.Fab) (width 0.1)) (fp_line (start -5.95 -3.2) (end -5.95 4.4) (layer F.Fab) (width 0.1)) (fp_line (start 5.95 -3.2) (end 5.95 4.4) (layer F.Fab) (width 0.1)) (fp_line (start -6.6 -5.1) (end -6.6 5.1) (layer F.CrtYd) (width 0.05)) (fp_line (start -6.6 5.1) (end 6.6 5.1) (layer F.CrtYd) (width 0.05)) (fp_line (start 6.6 5.1) (end 6.6 -5.1) (layer F.CrtYd) (width 0.05)) (fp_line (start 6.6 -5.1) (end -6.6 -5.1) (layer F.CrtYd) (width 0.05)) (fp_line (start -3.5 -1.6) (end -3 -0.892893) (layer F.Fab) (width 0.1)) (fp_line (start -3 -0.892893) (end -2.5 -1.6) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 1.5 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 1 smd roundrect (at -3 -2.85 270) (size 1 3.5) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 35 /CAN_H)) (pad 2 smd roundrect (at -1 -2.85 270) (size 1 3.5) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 34 /CAN_L)) (pad 3 smd roundrect (at 1 -2.85 270) (size 1 3.5) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 36 /GLV_24V)) (pad 4 smd roundrect (at 3 -2.85 270) (size 1 3.5) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 30 /GLV_RTN)) (pad MP smd roundrect (at -5.35 2.9 270) (size 1.5 3.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.166667)) (pad MP smd roundrect (at 5.35 2.9 270) (size 1.5 3.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.166667)) (model ${KISYS3DMOD}/Connector_JST.3dshapes/JST_PH_S4B-PH-SM4-TB_1x04-1MP_P2.00mm_Horizontal.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder (layer F.Cu) (tedit 5B36C52B) (tstamp 5E49C2DF) (at 124.46 87.385 90) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "resistor handsolder") (path /5E530C62) (attr smd) (fp_text reference R2 (at 0 -1.65 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 1K (at 0 1.65 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start 1.85 0.95) (end -1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.85 -0.95) (end 1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.85 -0.95) (end 1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.85 0.95) (end -1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.261252 0.71) (end 0.261252 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.261252 -0.71) (end 0.261252 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (pad 2 smd roundrect (at 1.025 0 90) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391) (net 39 "Net-(R2-Pad2)")) (pad 1 smd roundrect (at -1.025 0 90) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391) (net 30 /GLV_RTN)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder (layer F.Cu) (tedit 5B36C52B) (tstamp 5E49C2F0) (at 129.54 81.28) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "resistor handsolder") (path /5E470347) (attr smd) (fp_text reference R3 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 120 (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.261252 -0.71) (end 0.261252 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.261252 0.71) (end 0.261252 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.85 0.95) (end -1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.85 -0.95) (end 1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.85 -0.95) (end 1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.85 0.95) (end -1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (pad 1 smd roundrect (at -1.025 0) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391) (net 35 /CAN_H)) (pad 2 smd roundrect (at 1.025 0) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391) (net 34 /CAN_L)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder (layer F.Cu) (tedit 5B36C52B) (tstamp 5E49C301) (at 161.29 88.9 180) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "resistor handsolder") (path /5E49BB4C) (attr smd) (fp_text reference R4 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 100k (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start 1.85 0.95) (end -1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.85 -0.95) (end 1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.85 -0.95) (end 1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.85 0.95) (end -1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.261252 0.71) (end 0.261252 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.261252 -0.71) (end 0.261252 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (pad 2 smd roundrect (at 1.025 0 180) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391) (net 6 /ESP_3V3)) (pad 1 smd roundrect (at -1.025 0 180) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391) (net 37 /ESP_BUTTON1)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder (layer F.Cu) (tedit 5B36C52B) (tstamp 5E49C312) (at 158.75 92.71 180) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "resistor handsolder") (path /5E49E30E) (attr smd) (fp_text reference R5 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 1K (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start 1.85 0.95) (end -1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.85 -0.95) (end 1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.85 -0.95) (end 1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.85 0.95) (end -1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.261252 0.71) (end 0.261252 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.261252 -0.71) (end 0.261252 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (pad 2 smd roundrect (at 1.025 0 180) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391) (net 25 /BUTTON1)) (pad 1 smd roundrect (at -1.025 0 180) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391) (net 37 /ESP_BUTTON1)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder (layer F.Cu) (tedit 5B36C52B) (tstamp 5E49C323) (at 161.29 85.09 180) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "resistor handsolder") (path /5E4A7A2E) (attr smd) (fp_text reference R6 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 100k (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start 1.85 0.95) (end -1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.85 -0.95) (end 1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.85 -0.95) (end 1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.85 0.95) (end -1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.261252 0.71) (end 0.261252 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.261252 -0.71) (end 0.261252 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (pad 2 smd roundrect (at 1.025 0 180) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391) (net 6 /ESP_3V3)) (pad 1 smd roundrect (at -1.025 0 180) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391) (net 38 /ESP_BUTTON2)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder (layer F.Cu) (tedit 5B36C52B) (tstamp 5E49C334) (at 161.29 72.39 270) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "resistor handsolder") (path /5DDA09E6) (attr smd) (fp_text reference R7 (at 0 -1.65 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 68 (at 0 1.65 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.261252 -0.71) (end 0.261252 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.261252 0.71) (end 0.261252 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.85 0.95) (end -1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.85 -0.95) (end 1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.85 -0.95) (end 1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.85 0.95) (end -1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (pad 1 smd roundrect (at -1.025 0 270) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391) (net 1 "Net-(D3-Pad1)")) (pad 2 smd roundrect (at 1.025 0 270) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391) (net 8 /~R1)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder (layer F.Cu) (tedit 5B36C52B) (tstamp 5E49C345) (at 161.29 77.47 90) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "resistor handsolder") (path /5E3AD665) (attr smd) (fp_text reference R8 (at 0 -1.65 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 750 (at 0 1.65 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start 1.85 0.95) (end -1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.85 -0.95) (end 1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.85 -0.95) (end 1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.85 0.95) (end -1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.261252 0.71) (end 0.261252 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.261252 -0.71) (end 0.261252 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (pad 2 smd roundrect (at 1.025 0 90) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391) (net 10 /~G1)) (pad 1 smd roundrect (at -1.025 0 90) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391) (net 3 "Net-(D3-Pad3)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder (layer F.Cu) (tedit 5B36C52B) (tstamp 5E49C356) (at 161.29 102.87 90) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "resistor handsolder") (path /5E3AF009) (attr smd) (fp_text reference R9 (at 0 -1.65 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 68 (at 0 1.65 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.261252 -0.71) (end 0.261252 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.261252 0.71) (end 0.261252 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.85 0.95) (end -1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.85 -0.95) (end 1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.85 -0.95) (end 1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.85 0.95) (end -1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (pad 1 smd roundrect (at -1.025 0 90) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391) (net 5 "Net-(D4-Pad1)")) (pad 2 smd roundrect (at 1.025 0 90) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391) (net 11 /~R2)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder (layer F.Cu) (tedit 5B36C52B) (tstamp 5E49C367) (at 161.29 97.545 90) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "resistor handsolder") (path /5E3B0D38) (attr smd) (fp_text reference R10 (at 0 -1.65 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 750 (at 0 1.65 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.261252 -0.71) (end 0.261252 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.261252 0.71) (end 0.261252 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.85 0.95) (end -1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.85 -0.95) (end 1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.85 -0.95) (end 1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.85 0.95) (end -1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (pad 1 smd roundrect (at -1.025 0 90) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391) (net 4 "Net-(D4-Pad3)")) (pad 2 smd roundrect (at 1.025 0 90) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391) (net 12 /~G2)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder (layer F.Cu) (tedit 5B36C52B) (tstamp 5E49C378) (at 157.48 81.28 180) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "resistor handsolder") (path /5E4A7A37) (attr smd) (fp_text reference R11 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 1K (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.261252 -0.71) (end 0.261252 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.261252 0.71) (end 0.261252 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.85 0.95) (end -1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.85 -0.95) (end 1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.85 -0.95) (end 1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.85 0.95) (end -1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (pad 1 smd roundrect (at -1.025 0 180) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391) (net 38 /ESP_BUTTON2)) (pad 2 smd roundrect (at 1.025 0 180) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391) (net 24 /BUTTON2)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder (layer F.Cu) (tedit 5B36C52B) (tstamp 5E4C4567) (at 97.028 78.74 270) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (path /5E5E4130) (attr smd) (fp_text reference C1 (at 0 -1.65 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 10u (at 0 1.65 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.261252 -0.71) (end 0.261252 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.261252 0.71) (end 0.261252 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.85 0.95) (end -1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.85 -0.95) (end 1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.85 -0.95) (end 1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.85 0.95) (end -1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (pad 1 smd roundrect (at -1.025 0 270) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391) (net 36 /GLV_24V)) (pad 2 smd roundrect (at 1.025 0 270) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391) (net 30 /GLV_RTN)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder (layer F.Cu) (tedit 5B36C52B) (tstamp 5E4C4578) (at 97.028 83.811 90) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (path /5E5E78E5) (attr smd) (fp_text reference C4 (at 0 -1.65 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 10u (at 0 1.65 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start 1.85 0.95) (end -1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.85 -0.95) (end 1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.85 -0.95) (end 1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.85 0.95) (end -1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.261252 0.71) (end 0.261252 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.261252 -0.71) (end 0.261252 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (pad 2 smd roundrect (at 1.025 0 90) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391) (net 30 /GLV_RTN)) (pad 1 smd roundrect (at -1.025 0 90) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391) (net 42 /GLV_9V)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Lafayette_Electric_Car_Footprints:VX7805-500 (layer F.Cu) (tedit 5DCDEE17) (tstamp 5E4C4588) (at 90.17 80.264 270) (path /5E5E366E) (fp_text reference U3 (at 0 -5.334 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value V7809-500 (at 0 4.826 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -6.223 -4.445) (end 6.223 -4.445) (layer Eco1.User) (width 0.05)) (fp_line (start 6.223 -4.445) (end 6.223 3.937) (layer Eco1.User) (width 0.05)) (fp_line (start 6.223 3.937) (end -6.223 3.937) (layer Eco1.User) (width 0.05)) (fp_line (start -6.223 3.937) (end -6.223 -4.445) (layer Eco1.User) (width 0.05)) (fp_line (start -5.969 -4.191) (end 5.969 -4.191) (layer F.SilkS) (width 0.127)) (fp_line (start 5.969 -4.191) (end 5.969 3.683) (layer F.SilkS) (width 0.127)) (fp_line (start 5.969 3.683) (end -5.969 3.683) (layer F.SilkS) (width 0.127)) (fp_line (start -5.969 3.683) (end -5.969 -4.191) (layer F.SilkS) (width 0.127)) (fp_circle (center -2.543 1.645) (end -2.443 1.645) (layer Eco2.User) (width 0.35)) (pad 1 thru_hole rect (at -2.54 1.625 270) (size 1.508 1.508) (drill 1) (layers *.Cu *.Mask) (net 36 /GLV_24V)) (pad 2 thru_hole circle (at 0 1.625 270) (size 1.508 1.508) (drill 1) (layers *.Cu *.Mask) (net 30 /GLV_RTN)) (pad 3 thru_hole circle (at 2.54 1.625 270) (size 1.508 1.508) (drill 1) (layers *.Cu *.Mask) (net 42 /GLV_9V)) (model ${KIPRJMOD}/3DModels/CUI_V7805-500.step (offset (xyz 0 0.35 0)) (scale (xyz 1 1 1)) (rotate (xyz -90 0 0)) ) ) (gr_circle (center 200.7108 143.0782) (end 198.1708 143.0782) (layer Dwgs.User) (width 0.15) (tstamp 5E4F27C9)) (gr_circle (center 200.7108 165.8874) (end 198.1708 165.8874) (layer Dwgs.User) (width 0.15)) (gr_circle (center 200.9902 154.5336) (end 196.9897 154.5336) (layer Dwgs.User) (width 0.15) (tstamp 5E4F2795)) (gr_circle (center 211.6836 154.5336) (end 207.6831 154.5336) (layer Dwgs.User) (width 0.15)) (gr_circle (center 213.3092 143.9164) (end 210.1342 143.9164) (layer Dwgs.User) (width 0.15) (tstamp 5E4F2762)) (gr_circle (center 99.7204 166.2938) (end 96.5454 166.2938) (layer Dwgs.User) (width 0.15) (tstamp 5E4F2762)) (gr_circle (center 99.7204 139.3698) (end 96.5454 139.3698) (layer Dwgs.User) (width 0.15) (tstamp 5E4F2762)) (gr_circle (center 213.3092 166.9796) (end 210.1342 166.9796) (layer Dwgs.User) (width 0.15)) (gr_line (start 248.92 124.46) (end 248.92 158.75) (layer Dwgs.User) (width 0.15) (tstamp 5E4F2679)) (gr_line (start 320.294 158.75) (end 248.92 158.75) (layer Dwgs.User) (width 0.15)) (gr_line (start 320.294 124.46) (end 320.294 158.75) (layer Dwgs.User) (width 0.15)) (gr_line (start 248.92 124.46) (end 320.294 124.46) (layer Dwgs.User) (width 0.15)) (gr_line (start 189.484 133.2992) (end 220.4212 140.9192) (layer Dwgs.User) (width 0.15) (tstamp 5E4F2446)) (gr_line (start 220.4212 175.5648) (end 220.4212 140.9192) (layer Dwgs.User) (width 0.15)) (gr_line (start 88.4936 133.2992) (end 189.484 133.2992) (layer Dwgs.User) (width 0.15)) (gr_line (start 88.4936 175.5648) (end 88.4936 133.2992) (layer Dwgs.User) (width 0.15)) (gr_line (start 220.4212 175.5648) (end 88.4936 175.5648) (layer Dwgs.User) (width 0.15)) (gr_line (start 85.852 106.9594) (end 85.852 102.3874) (layer Dwgs.User) (width 0.15) (tstamp 5E49C898)) (gr_line (start 85.852 102.3874) (end 81.28 102.3874) (layer Dwgs.User) (width 0.15) (tstamp 5E49C897)) (gr_line (start 170.942 102.3874) (end 166.37 102.3874) (layer Dwgs.User) (width 0.15) (tstamp 5E49C898)) (gr_line (start 166.37 102.3874) (end 166.37 106.9594) (layer Dwgs.User) (width 0.15) (tstamp 5E49C897)) (gr_line (start 81.28 73.152) (end 85.852 73.152) (layer Dwgs.User) (width 0.15) (tstamp 5E49C898)) (gr_line (start 85.852 73.152) (end 85.852 68.58) (layer Dwgs.User) (width 0.15) (tstamp 5E49C897)) (gr_line (start 166.37 68.58) (end 166.37 73.152) (layer Dwgs.User) (width 0.15) (tstamp 5E49C87F)) (gr_line (start 170.942 68.58) (end 170.942 106.9594) (layer Dwgs.User) (width 0.15) (tstamp 5E49C86C)) (gr_line (start 81.28 106.9594) (end 170.942 106.9594) (layer Dwgs.User) (width 0.15)) (gr_line (start 81.28 68.58) (end 170.942 68.58) (layer Dwgs.User) (width 0.15)) (gr_line (start 81.28 68.58) (end 81.28 106.9594) (layer Dwgs.User) (width 0.15)) (segment (start 166.125 76.2) (end 180.34 76.2) (width 0.25) (layer F.Cu) (net 1)) (segment (start 161.29 71.365) (end 166.125 76.2) (width 0.25) (layer F.Cu) (net 1)) (segment (start 74.048882 74.74) (end 79.248 79.939118) (width 0.25) (layer F.Cu) (net 2)) (segment (start 71.12 74.74) (end 74.048882 74.74) (width 0.25) (layer F.Cu) (net 2)) (via (at 81.28 99.568) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 2)) (segment (start 79.248 79.939118) (end 79.248 97.536) (width 0.25) (layer F.Cu) (net 2)) (segment (start 79.248 97.536) (end 81.28 99.568) (width 0.25) (layer F.Cu) (net 2)) (segment (start 114.430001 101.509999) (end 115.28 100.66) (width 0.25) (layer B.Cu) (net 2)) (segment (start 113.58598 102.35402) (end 114.430001 101.509999) (width 0.25) (layer B.Cu) (net 2)) (segment (start 86.853256 102.35402) (end 113.58598 102.35402) (width 0.25) (layer B.Cu) (net 2)) (segment (start 84.067234 99.568) (end 86.853256 102.35402) (width 0.25) (layer B.Cu) (net 2)) (segment (start 81.28 99.568) (end 84.067234 99.568) (width 0.25) (layer B.Cu) (net 2)) (segment (start 192.01 85.33) (end 194.31 85.33) (width 0.25) (layer B.Cu) (net 2)) (segment (start 182.88 76.2) (end 192.01 85.33) (width 0.25) (layer B.Cu) (net 2)) (segment (start 177.255 85.33) (end 176.53 85.33) (width 0.25) (layer B.Cu) (net 2)) (segment (start 182.88 79.705) (end 177.255 85.33) (width 0.25) (layer B.Cu) (net 2)) (segment (start 182.88 76.2) (end 182.88 79.705) (width 0.25) (layer B.Cu) (net 2)) (segment (start 176.53 86.28) (end 176.53 89.83) (width 0.25) (layer B.Cu) (net 2)) (segment (start 176.53 85.33) (end 176.53 86.28) (width 0.25) (layer B.Cu) (net 2)) (segment (start 194.31 86.28) (end 194.31 89.83) (width 0.25) (layer B.Cu) (net 2)) (segment (start 194.31 85.33) (end 194.31 86.28) (width 0.25) (layer B.Cu) (net 2)) (segment (start 176.53 93.98) (end 182.88 100.33) (width 0.25) (layer B.Cu) (net 2)) (segment (start 176.53 89.83) (end 176.53 93.98) (width 0.25) (layer B.Cu) (net 2)) (segment (start 120.284 105.664) (end 115.28 100.66) (width 0.25) (layer B.Cu) (net 2)) (segment (start 158.171118 105.664) (end 120.284 105.664) (width 0.25) (layer B.Cu) (net 2)) (segment (start 176.53 93.98) (end 169.855118 93.98) (width 0.25) (layer B.Cu) (net 2)) (segment (start 169.855118 93.98) (end 158.171118 105.664) (width 0.25) (layer B.Cu) (net 2)) (segment (start 183.125 78.495) (end 185.42 76.2) (width 0.25) (layer F.Cu) (net 3)) (segment (start 161.29 78.495) (end 183.125 78.495) (width 0.25) (layer F.Cu) (net 3)) (segment (start 185.42 100.33) (end 185.42 101.602792) (width 0.25) (layer B.Cu) (net 4)) (segment (start 183.898792 103.124) (end 175.26 103.124) (width 0.25) (layer B.Cu) (net 4)) (segment (start 185.42 101.602792) (end 183.898792 103.124) (width 0.25) (layer B.Cu) (net 4)) (via (at 174.752 102.616) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 4)) (segment (start 175.26 103.124) (end 174.752 102.616) (width 0.25) (layer B.Cu) (net 4)) (segment (start 170.706 98.57) (end 161.29 98.57) (width 0.25) (layer F.Cu) (net 4)) (segment (start 174.752 102.616) (end 170.706 98.57) (width 0.25) (layer F.Cu) (net 4)) (segment (start 179.19 100.33) (end 178.936 100.584) (width 0.25) (layer B.Cu) (net 5)) (segment (start 180.34 100.33) (end 179.19 100.33) (width 0.25) (layer B.Cu) (net 5)) (via (at 164.592 100.584) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 5)) (segment (start 178.936 100.584) (end 164.592 100.584) (width 0.25) (layer B.Cu) (net 5)) (segment (start 163.821 103.895) (end 161.29 103.895) (width 0.25) (layer F.Cu) (net 5)) (segment (start 164.592 100.584) (end 164.592 103.124) (width 0.25) (layer F.Cu) (net 5)) (segment (start 164.592 103.124) (end 163.821 103.895) (width 0.25) (layer F.Cu) (net 5)) (segment (start 111.890001 99.810001) (end 110.986001 99.810001) (width 0.25) (layer F.Cu) (net 6)) (segment (start 112.74 100.66) (end 111.890001 99.810001) (width 0.25) (layer F.Cu) (net 6)) (via (at 108.712 97.536) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 6)) (segment (start 110.986001 99.810001) (end 108.712 97.536) (width 0.25) (layer F.Cu) (net 6)) (segment (start 103.24701 92.07101) (end 81.40301 92.07101) (width 0.25) (layer B.Cu) (net 6)) (segment (start 108.712 97.536) (end 103.24701 92.07101) (width 0.25) (layer B.Cu) (net 6)) (via (at 80.264 90.932) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 6)) (segment (start 81.40301 92.07101) (end 80.264 90.932) (width 0.25) (layer B.Cu) (net 6)) (segment (start 72.97 72.74) (end 71.12 72.74) (width 0.25) (layer F.Cu) (net 6)) (segment (start 74.772 72.74) (end 72.97 72.74) (width 0.25) (layer F.Cu) (net 6)) (segment (start 80.264 78.232) (end 74.772 72.74) (width 0.25) (layer F.Cu) (net 6)) (segment (start 80.264 90.932) (end 80.264 78.232) (width 0.25) (layer F.Cu) (net 6)) (segment (start 160.265 85.09) (end 160.265 88.9) (width 0.25) (layer F.Cu) (net 6)) (via (at 153.162 99.187) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 6)) (segment (start 153.162 99.187) (end 153.162 91.567) (width 0.25) (layer B.Cu) (net 6)) (via (at 155.702 89.027) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 6)) (segment (start 153.162 91.567) (end 155.702 89.027) (width 0.25) (layer B.Cu) (net 6)) (segment (start 160.138 89.027) (end 160.265 88.9) (width 0.25) (layer F.Cu) (net 6)) (segment (start 155.702 89.027) (end 160.138 89.027) (width 0.25) (layer F.Cu) (net 6)) (segment (start 153.162 99.441) (end 153.162 99.187) (width 0.25) (layer F.Cu) (net 6)) (segment (start 112.74 100.66) (end 112.74 101.862081) (width 0.25) (layer F.Cu) (net 6)) (segment (start 112.74 101.862081) (end 114.890919 104.013) (width 0.25) (layer F.Cu) (net 6)) (segment (start 148.336 104.013) (end 153.162 99.187) (width 0.25) (layer F.Cu) (net 6)) (segment (start 114.890919 104.013) (end 148.336 104.013) (width 0.25) (layer F.Cu) (net 6)) (segment (start 71.69071 81.31071) (end 74.64529 81.31071) (width 0.25) (layer F.Cu) (net 7)) (segment (start 71.12 80.74) (end 71.69071 81.31071) (width 0.25) (layer F.Cu) (net 7)) (segment (start 74.64529 81.31071) (end 74.676 81.28) (width 0.25) (layer F.Cu) (net 7)) (via (at 74.676 81.28) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 7)) (segment (start 75.241685 81.28) (end 82.353685 88.392) (width 0.25) (layer B.Cu) (net 7)) (segment (start 74.676 81.28) (end 75.241685 81.28) (width 0.25) (layer B.Cu) (net 7)) (segment (start 82.353685 88.392) (end 106.172 88.392) (width 0.25) (layer B.Cu) (net 7)) (via (at 112.268 94.488) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 7)) (segment (start 106.172 88.392) (end 112.268 94.488) (width 0.25) (layer B.Cu) (net 7)) (segment (start 117.82 100.04) (end 117.82 100.66) (width 0.25) (layer F.Cu) (net 7)) (segment (start 112.268 94.488) (end 117.82 100.04) (width 0.25) (layer F.Cu) (net 7)) (segment (start 123.713 104.013) (end 152.527 104.013) (width 0.25) (layer B.Cu) (net 8)) (segment (start 120.36 100.66) (end 123.713 104.013) (width 0.25) (layer B.Cu) (net 8)) (segment (start 152.527 104.013) (end 167.005 89.535) (width 0.25) (layer B.Cu) (net 8)) (segment (start 167.005 89.535) (end 167.005 77.724) (width 0.25) (layer B.Cu) (net 8)) (via (at 163.892361 75.248639) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 8)) (segment (start 167.005 77.724) (end 164.529639 75.248639) (width 0.25) (layer B.Cu) (net 8)) (segment (start 164.529639 75.248639) (end 163.892361 75.248639) (width 0.25) (layer B.Cu) (net 8)) (segment (start 162.058722 73.415) (end 161.29 73.415) (width 0.25) (layer F.Cu) (net 8)) (segment (start 163.892361 75.248639) (end 162.058722 73.415) (width 0.25) (layer F.Cu) (net 8)) (via (at 74.676 86.868) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 9)) (segment (start 71.12 86.74) (end 74.548 86.74) (width 0.25) (layer F.Cu) (net 9)) (segment (start 74.548 86.74) (end 74.676 86.868) (width 0.25) (layer F.Cu) (net 9)) (segment (start 78.152539 86.868) (end 82.724539 91.44) (width 0.25) (layer B.Cu) (net 9)) (segment (start 74.676 86.868) (end 78.152539 86.868) (width 0.25) (layer B.Cu) (net 9)) (segment (start 82.724539 91.44) (end 104.648 91.44) (width 0.25) (layer B.Cu) (net 9)) (via (at 109.68768 96.54016) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 9)) (segment (start 104.648 91.44) (end 109.68768 96.47968) (width 0.25) (layer B.Cu) (net 9)) (segment (start 109.68768 96.47968) (end 109.68768 96.54016) (width 0.25) (layer B.Cu) (net 9)) (segment (start 111.822528 98.675008) (end 112.514626 98.675008) (width 0.25) (layer F.Cu) (net 9)) (segment (start 109.68768 96.54016) (end 111.822528 98.675008) (width 0.25) (layer F.Cu) (net 9)) (via (at 112.776 98.95) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 9)) (segment (start 112.514626 98.675008) (end 112.514626 98.688626) (width 0.25) (layer F.Cu) (net 9)) (segment (start 112.514626 98.688626) (end 112.776 98.95) (width 0.25) (layer F.Cu) (net 9)) (segment (start 123.73 98.95) (end 125.44 100.66) (width 0.25) (layer B.Cu) (net 9)) (segment (start 112.776 98.95) (end 123.73 98.95) (width 0.25) (layer B.Cu) (net 9)) (segment (start 127.98 101.862081) (end 129.114919 102.997) (width 0.25) (layer B.Cu) (net 10)) (segment (start 127.98 100.66) (end 127.98 101.862081) (width 0.25) (layer B.Cu) (net 10)) (segment (start 129.114919 102.997) (end 151.765 102.997) (width 0.25) (layer B.Cu) (net 10)) (segment (start 165.457681 89.304319) (end 165.457681 78.589681) (width 0.25) (layer B.Cu) (net 10)) (segment (start 151.765 102.997) (end 165.457681 89.304319) (width 0.25) (layer B.Cu) (net 10)) (via (at 163.576 76.708) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 10)) (segment (start 165.457681 78.589681) (end 163.576 76.708) (width 0.25) (layer B.Cu) (net 10)) (segment (start 161.553 76.708) (end 161.29 76.445) (width 0.25) (layer F.Cu) (net 10)) (segment (start 163.576 76.708) (end 161.553 76.708) (width 0.25) (layer F.Cu) (net 10)) (segment (start 131.269999 75.809999) (end 130.42 74.96) (width 0.25) (layer F.Cu) (net 11)) (segment (start 156.681628 101.221628) (end 131.269999 75.809999) (width 0.25) (layer F.Cu) (net 11)) (segment (start 160.666628 101.221628) (end 156.681628 101.221628) (width 0.25) (layer F.Cu) (net 11)) (segment (start 161.29 101.845) (end 160.666628 101.221628) (width 0.25) (layer F.Cu) (net 11)) (segment (start 127.88 76.162081) (end 129.568919 77.851) (width 0.25) (layer F.Cu) (net 12)) (segment (start 127.88 74.96) (end 127.88 76.162081) (width 0.25) (layer F.Cu) (net 12)) (via (at 130.683 77.851) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 12)) (segment (start 129.568919 77.851) (end 130.683 77.851) (width 0.25) (layer F.Cu) (net 12)) (segment (start 130.683 77.851) (end 137.541 77.851) (width 0.25) (layer B.Cu) (net 12)) (via (at 137.541 77.851) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 12)) (segment (start 156.21 96.52) (end 161.29 96.52) (width 0.25) (layer F.Cu) (net 12)) (segment (start 137.541 77.851) (end 156.21 96.52) (width 0.25) (layer F.Cu) (net 12)) (via (at 74.676 84.836) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 13)) (segment (start 71.12 84.74) (end 74.58 84.74) (width 0.25) (layer F.Cu) (net 13)) (segment (start 74.58 84.74) (end 74.676 84.836) (width 0.25) (layer F.Cu) (net 13)) (segment (start 77.012921 84.836) (end 82.600921 90.424) (width 0.25) (layer B.Cu) (net 13)) (segment (start 74.676 84.836) (end 77.012921 84.836) (width 0.25) (layer B.Cu) (net 13)) (segment (start 82.600921 90.424) (end 105.156 90.424) (width 0.25) (layer B.Cu) (net 13)) (via (at 110.744 96.012) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 13)) (segment (start 105.156 90.424) (end 110.744 96.012) (width 0.25) (layer B.Cu) (net 13)) (segment (start 110.744 96.012) (end 112.776 98.044) (width 0.25) (layer F.Cu) (net 13)) (via (at 114.3 98.044) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 13)) (segment (start 112.776 98.044) (end 114.3 98.044) (width 0.25) (layer F.Cu) (net 13)) (segment (start 135.524 98.044) (end 138.14 100.66) (width 0.25) (layer B.Cu) (net 13)) (segment (start 114.3 98.044) (end 135.524 98.044) (width 0.25) (layer B.Cu) (net 13)) (segment (start 71.12 82.74) (end 74.612 82.74) (width 0.25) (layer F.Cu) (net 16)) (via (at 74.676 82.804) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 16)) (segment (start 74.612 82.74) (end 74.676 82.804) (width 0.25) (layer F.Cu) (net 16)) (segment (start 75.873303 82.804) (end 82.477303 89.408) (width 0.25) (layer B.Cu) (net 16)) (segment (start 74.676 82.804) (end 75.873303 82.804) (width 0.25) (layer B.Cu) (net 16)) (segment (start 112.702881 95.394001) (end 116.332 91.764882) (width 0.25) (layer B.Cu) (net 16)) (segment (start 111.833119 95.394001) (end 112.702881 95.394001) (width 0.25) (layer B.Cu) (net 16)) (segment (start 82.477303 89.408) (end 105.847118 89.408) (width 0.25) (layer B.Cu) (net 16)) (segment (start 105.847118 89.408) (end 111.833119 95.394001) (width 0.25) (layer B.Cu) (net 16)) (via (at 116.332 91.44) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 16)) (segment (start 116.332 91.764882) (end 116.332 91.44) (width 0.25) (layer B.Cu) (net 16)) (segment (start 116.332 91.44) (end 117.856 91.44) (width 0.25) (layer F.Cu) (net 16)) (via (at 118.942831 92.526831) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 16)) (segment (start 117.856 91.44) (end 118.942831 92.526831) (width 0.25) (layer F.Cu) (net 16)) (segment (start 137.626831 92.526831) (end 145.76 100.66) (width 0.25) (layer B.Cu) (net 16)) (segment (start 118.942831 92.526831) (end 137.626831 92.526831) (width 0.25) (layer B.Cu) (net 16)) (via (at 74.676 76.708) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 18)) (segment (start 71.12 76.74) (end 74.644 76.74) (width 0.25) (layer F.Cu) (net 18)) (segment (start 74.644 76.74) (end 74.676 76.708) (width 0.25) (layer F.Cu) (net 18)) (segment (start 74.676 76.708) (end 84.328 76.708) (width 0.25) (layer B.Cu) (net 18)) (segment (start 84.328 76.708) (end 88.9 72.136) (width 0.25) (layer B.Cu) (net 18)) (segment (start 114.896 72.136) (end 117.72 74.96) (width 0.25) (layer B.Cu) (net 18)) (segment (start 88.9 72.136) (end 114.896 72.136) (width 0.25) (layer B.Cu) (net 18)) (segment (start 71.12 78.74) (end 74.676 78.74) (width 0.25) (layer F.Cu) (net 20)) (via (at 74.676 78.74) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 20)) (segment (start 83.312 78.74) (end 86.36 75.692) (width 0.25) (layer B.Cu) (net 20)) (segment (start 74.676 78.74) (end 83.312 78.74) (width 0.25) (layer B.Cu) (net 20)) (segment (start 121.92 75.84) (end 122.8 74.96) (width 0.25) (layer B.Cu) (net 20)) (segment (start 86.36 75.692) (end 108.712 75.692) (width 0.25) (layer B.Cu) (net 20)) (segment (start 108.712 75.692) (end 111.252 78.232) (width 0.25) (layer B.Cu) (net 20)) (segment (start 111.252 78.232) (end 121.92 78.232) (width 0.25) (layer B.Cu) (net 20)) (segment (start 121.92 78.232) (end 121.92 75.84) (width 0.25) (layer B.Cu) (net 20)) (segment (start 185.705 84.38) (end 186.055 84.03) (width 0.25) (layer B.Cu) (net 24)) (segment (start 185.705 85.33) (end 185.705 84.38) (width 0.25) (layer B.Cu) (net 24)) (via (at 186.055 82.677) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 24)) (segment (start 186.055 84.03) (end 186.055 82.677) (width 0.25) (layer B.Cu) (net 24)) (segment (start 156.455 80.48) (end 156.455 81.28) (width 0.25) (layer F.Cu) (net 24)) (segment (start 158.070119 78.332999) (end 156.455 79.948118) (width 0.25) (layer F.Cu) (net 24)) (segment (start 158.939881 78.332999) (end 158.070119 78.332999) (width 0.25) (layer F.Cu) (net 24)) (segment (start 167.008152 80.07399) (end 160.680872 80.07399) (width 0.25) (layer F.Cu) (net 24)) (segment (start 160.680872 80.07399) (end 158.939881 78.332999) (width 0.25) (layer F.Cu) (net 24)) (segment (start 169.611162 82.677) (end 167.008152 80.07399) (width 0.25) (layer F.Cu) (net 24)) (segment (start 156.455 79.948118) (end 156.455 80.48) (width 0.25) (layer F.Cu) (net 24)) (segment (start 186.055 82.677) (end 169.611162 82.677) (width 0.25) (layer F.Cu) (net 24)) (segment (start 160.011 94.996) (end 200.152 94.996) (width 0.25) (layer F.Cu) (net 25)) (segment (start 157.725 92.71) (end 160.011 94.996) (width 0.25) (layer F.Cu) (net 25)) (via (at 202.184 92.964) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 25)) (segment (start 200.152 94.996) (end 202.184 92.964) (width 0.25) (layer F.Cu) (net 25)) (segment (start 203.485 91.663) (end 203.485 89.83) (width 0.25) (layer B.Cu) (net 25)) (segment (start 202.184 92.964) (end 203.485 91.663) (width 0.25) (layer B.Cu) (net 25)) (segment (start 122.9 94.84) (end 122.9 100.66) (width 0.25) (layer F.Cu) (net 29)) (segment (start 127.635 90.105) (end 122.9 94.84) (width 0.25) (layer F.Cu) (net 29)) (segment (start 87.478683 96.52) (end 88.545 96.52) (width 0.25) (layer F.Cu) (net 30)) (segment (start 87.211318 96.52) (end 87.478683 96.52) (width 0.25) (layer F.Cu) (net 30)) (segment (start 80.909318 102.822) (end 87.211318 96.52) (width 0.25) (layer F.Cu) (net 30)) (segment (start 71.43 102.822) (end 80.909318 102.822) (width 0.25) (layer F.Cu) (net 30)) (segment (start 89.552 97.527) (end 97.028 97.527) (width 0.25) (layer F.Cu) (net 30)) (segment (start 88.545 96.52) (end 89.552 97.527) (width 0.25) (layer F.Cu) (net 30)) (segment (start 94.506 80.264) (end 97.028 82.786) (width 0.25) (layer F.Cu) (net 30)) (segment (start 88.545 80.264) (end 94.506 80.264) (width 0.25) (layer F.Cu) (net 30)) (segment (start 97.651372 80.388372) (end 97.028 79.765) (width 0.25) (layer F.Cu) (net 30)) (segment (start 97.651372 82.162628) (end 97.651372 80.388372) (width 0.25) (layer F.Cu) (net 30)) (segment (start 97.028 82.786) (end 97.651372 82.162628) (width 0.25) (layer F.Cu) (net 30)) (segment (start 97.651372 94.612372) (end 97.028 93.989) (width 0.25) (layer F.Cu) (net 30)) (segment (start 97.651372 96.903628) (end 97.651372 94.612372) (width 0.25) (layer F.Cu) (net 30)) (segment (start 97.028 97.527) (end 97.651372 96.903628) (width 0.25) (layer F.Cu) (net 30)) (segment (start 96.511 93.989) (end 97.028 93.989) (width 0.25) (layer F.Cu) (net 30)) (segment (start 128.905 89.03) (end 128.905 90.105) (width 0.25) (layer F.Cu) (net 30)) (segment (start 128.285 88.41) (end 128.905 89.03) (width 0.25) (layer F.Cu) (net 30)) (segment (start 124.46 88.41) (end 128.285 88.41) (width 0.25) (layer F.Cu) (net 30)) (segment (start 98.359882 79.765) (end 104.520883 73.603999) (width 0.25) (layer F.Cu) (net 30)) (segment (start 97.028 79.765) (end 98.359882 79.765) (width 0.25) (layer F.Cu) (net 30)) (segment (start 104.520883 73.603999) (end 113.823999 73.603999) (width 0.25) (layer F.Cu) (net 30)) (segment (start 113.823999 73.603999) (end 114.330001 74.110001) (width 0.25) (layer F.Cu) (net 30)) (segment (start 114.330001 74.110001) (end 115.18 74.96) (width 0.25) (layer F.Cu) (net 30)) (segment (start 97.651372 82.162628) (end 98.685372 82.162628) (width 0.25) (layer F.Cu) (net 30)) (via (at 100.248324 80.334398) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 30)) (segment (start 98.685372 82.162628) (end 100.248324 80.599676) (width 0.25) (layer F.Cu) (net 30)) (segment (start 100.248324 80.599676) (end 100.248324 80.334398) (width 0.25) (layer F.Cu) (net 30)) (segment (start 101.11464 81.200714) (end 101.11464 82.27336) (width 0.25) (layer B.Cu) (net 30)) (segment (start 100.248324 80.334398) (end 101.11464 81.200714) (width 0.25) (layer B.Cu) (net 30)) (via (at 101.164687 82.243286) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 30)) (segment (start 101.11464 82.27336) (end 101.144714 82.243286) (width 0.25) (layer B.Cu) (net 30)) (segment (start 101.144714 82.243286) (end 101.164687 82.243286) (width 0.25) (layer B.Cu) (net 30)) (segment (start 97.651372 93.365628) (end 97.028 93.989) (width 0.25) (layer F.Cu) (net 30)) (segment (start 98.026754 93.365628) (end 97.651372 93.365628) (width 0.25) (layer F.Cu) (net 30)) (segment (start 101.164687 90.227695) (end 98.026754 93.365628) (width 0.25) (layer F.Cu) (net 30)) (segment (start 101.164687 82.243286) (end 101.164687 90.227695) (width 0.25) (layer F.Cu) (net 30)) (segment (start 115.18 79.13) (end 115.18 74.96) (width 0.25) (layer F.Cu) (net 30)) (segment (start 124.46 88.41) (end 115.18 79.13) (width 0.25) (layer F.Cu) (net 30)) (segment (start 166.37 92.465) (end 166.125 92.71) (width 0.25) (layer F.Cu) (net 30)) (segment (start 128.285 88.41) (end 130.03 88.41) (width 0.25) (layer F.Cu) (net 30)) (via (at 130.57616 87.92432) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 30)) (segment (start 130.03 88.41) (end 130.51568 87.92432) (width 0.25) (layer F.Cu) (net 30)) (segment (start 130.51568 87.92432) (end 130.57616 87.92432) (width 0.25) (layer F.Cu) (net 30)) (segment (start 130.57616 87.92432) (end 164.55168 87.92432) (width 0.25) (layer B.Cu) (net 30)) (via (at 164.55168 87.92432) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 30)) (segment (start 166.07568 87.92432) (end 166.37 87.63) (width 0.25) (layer F.Cu) (net 30)) (segment (start 164.55168 87.92432) (end 166.07568 87.92432) (width 0.25) (layer F.Cu) (net 30)) (segment (start 166.37 81.28) (end 166.37 87.63) (width 0.25) (layer F.Cu) (net 30)) (segment (start 166.37 87.63) (end 166.37 92.465) (width 0.25) (layer F.Cu) (net 30)) (segment (start 96.511 99.06) (end 97.028 99.577) (width 0.25) (layer F.Cu) (net 31)) (segment (start 88.545 99.06) (end 96.511 99.06) (width 0.25) (layer F.Cu) (net 31)) (segment (start 97.028 99.577) (end 103.133 93.472) (width 0.25) (layer F.Cu) (net 31)) (segment (start 103.133 93.472) (end 118.872 93.472) (width 0.25) (layer F.Cu) (net 31)) (via (at 118.854575 93.70453) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 31)) (segment (start 118.872 93.472) (end 118.872 93.687105) (width 0.25) (layer F.Cu) (net 31)) (segment (start 118.872 93.687105) (end 118.854575 93.70453) (width 0.25) (layer F.Cu) (net 31)) (segment (start 118.854575 93.70453) (end 127.78347 93.70453) (width 0.25) (layer B.Cu) (net 31)) (via (at 127.78347 93.70453) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 31)) (segment (start 130.175 91.18) (end 130.175 90.105) (width 0.25) (layer F.Cu) (net 31)) (segment (start 130.175 91.313) (end 130.175 91.18) (width 0.25) (layer F.Cu) (net 31)) (segment (start 127.78347 93.70453) (end 130.175 91.313) (width 0.25) (layer F.Cu) (net 31)) (segment (start 131.445 99.735) (end 130.52 100.66) (width 0.25) (layer F.Cu) (net 32)) (segment (start 131.445 90.105) (end 131.445 99.735) (width 0.25) (layer F.Cu) (net 32)) (segment (start 130.175 81.67) (end 130.565 81.28) (width 0.25) (layer F.Cu) (net 34)) (segment (start 130.175 85.155) (end 130.175 81.67) (width 0.25) (layer F.Cu) (net 34)) (segment (start 71.43 98.822) (end 74.406 98.822) (width 0.25) (layer F.Cu) (net 34)) (via (at 74.676 98.552) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 34)) (segment (start 74.406 98.822) (end 74.676 98.552) (width 0.25) (layer F.Cu) (net 34)) (via (at 130.048 86.868) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 34)) (segment (start 130.048 85.282) (end 130.175 85.155) (width 0.25) (layer F.Cu) (net 34)) (segment (start 130.048 86.868) (end 130.048 85.282) (width 0.25) (layer F.Cu) (net 34)) (segment (start 129.648001 87.267999) (end 130.048 86.868) (width 0.25) (layer B.Cu) (net 34)) (segment (start 83.943616 98.552) (end 87.114627 101.723011) (width 0.25) (layer B.Cu) (net 34)) (segment (start 87.114627 101.723011) (end 108.465374 101.72301) (width 0.25) (layer B.Cu) (net 34)) (segment (start 122.414383 87.774001) (end 129.141999 87.774001) (width 0.25) (layer B.Cu) (net 34)) (segment (start 108.465374 101.72301) (end 122.414383 87.774001) (width 0.25) (layer B.Cu) (net 34)) (segment (start 74.676 98.552) (end 83.943616 98.552) (width 0.25) (layer B.Cu) (net 34)) (segment (start 129.141999 87.774001) (end 129.648001 87.267999) (width 0.25) (layer B.Cu) (net 34)) (segment (start 128.905 81.67) (end 128.515 81.28) (width 0.25) (layer F.Cu) (net 35)) (segment (start 128.905 85.155) (end 128.905 81.67) (width 0.25) (layer F.Cu) (net 35)) (segment (start 72.00071 96.25129) (end 74.91529 96.25129) (width 0.25) (layer F.Cu) (net 35)) (segment (start 71.43 96.822) (end 72.00071 96.25129) (width 0.25) (layer F.Cu) (net 35)) (via (at 75.184 96.52) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 35)) (segment (start 74.91529 96.25129) (end 75.184 96.52) (width 0.25) (layer F.Cu) (net 35)) (via (at 128.524 86.868) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 35)) (segment (start 128.524 85.536) (end 128.905 85.155) (width 0.25) (layer F.Cu) (net 35)) (segment (start 128.524 86.868) (end 128.524 85.536) (width 0.25) (layer F.Cu) (net 35)) (segment (start 87.376 101.092) (end 108.204 101.092) (width 0.25) (layer B.Cu) (net 35)) (segment (start 108.204 101.092) (end 122.428 86.868) (width 0.25) (layer B.Cu) (net 35)) (segment (start 122.428 86.868) (end 128.524 86.868) (width 0.25) (layer B.Cu) (net 35)) (segment (start 75.184 96.52) (end 83.82 96.52) (width 0.25) (layer B.Cu) (net 35)) (segment (start 85.344 99.06) (end 87.376 101.092) (width 0.25) (layer B.Cu) (net 35)) (segment (start 85.344 98.044) (end 85.344 99.06) (width 0.25) (layer B.Cu) (net 35)) (segment (start 83.82 96.52) (end 85.344 98.044) (width 0.25) (layer B.Cu) (net 35)) (segment (start 94.987 93.98) (end 97.028 91.939) (width 0.25) (layer F.Cu) (net 36)) (segment (start 88.545 93.98) (end 94.987 93.98) (width 0.25) (layer F.Cu) (net 36)) (segment (start 97.019 77.724) (end 97.028 77.715) (width 0.25) (layer F.Cu) (net 36)) (segment (start 88.545 77.724) (end 97.019 77.724) (width 0.25) (layer F.Cu) (net 36)) (segment (start 97.028 77.715) (end 99.051 77.715) (width 0.25) (layer F.Cu) (net 36)) (via (at 99.06 77.724) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 36)) (segment (start 99.051 77.715) (end 99.06 77.724) (width 0.25) (layer F.Cu) (net 36)) (segment (start 98.035 90.932) (end 97.028 91.939) (width 0.25) (layer F.Cu) (net 36)) (segment (start 99.568 90.932) (end 98.035 90.932) (width 0.25) (layer F.Cu) (net 36)) (segment (start 99.06 77.724) (end 99.06 81.788) (width 0.25) (layer B.Cu) (net 36)) (via (at 100.208639 82.936639) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 36)) (segment (start 99.06 81.788) (end 100.208639 82.936639) (width 0.25) (layer B.Cu) (net 36)) (segment (start 99.568 83.577278) (end 99.568 90.932) (width 0.25) (layer F.Cu) (net 36)) (segment (start 100.208639 82.936639) (end 99.568 83.577278) (width 0.25) (layer F.Cu) (net 36)) (segment (start 81.703 100.822) (end 88.545 93.98) (width 0.25) (layer F.Cu) (net 36)) (segment (start 71.43 100.822) (end 81.703 100.822) (width 0.25) (layer F.Cu) (net 36)) (segment (start 164.075 90.66) (end 162.315 88.9) (width 0.25) (layer F.Cu) (net 37)) (segment (start 164.075 92.71) (end 164.075 90.66) (width 0.25) (layer F.Cu) (net 37)) (segment (start 164.075 92.71) (end 159.775 92.71) (width 0.25) (layer F.Cu) (net 37)) (segment (start 140.58 76.162081) (end 154.841919 90.424) (width 0.25) (layer F.Cu) (net 37)) (segment (start 140.58 74.96) (end 140.58 76.162081) (width 0.25) (layer F.Cu) (net 37)) (segment (start 157.489 90.424) (end 159.775 92.71) (width 0.25) (layer F.Cu) (net 37)) (segment (start 154.841919 90.424) (end 157.489 90.424) (width 0.25) (layer F.Cu) (net 37)) (segment (start 162.315 83.285) (end 162.315 85.09) (width 0.25) (layer F.Cu) (net 38)) (segment (start 164.32 81.28) (end 162.315 83.285) (width 0.25) (layer F.Cu) (net 38)) (segment (start 158.505 81.28) (end 160.528 81.28) (width 0.25) (layer F.Cu) (net 38)) (segment (start 162.315 83.067) (end 162.315 85.09) (width 0.25) (layer F.Cu) (net 38)) (segment (start 160.528 81.28) (end 162.315 83.067) (width 0.25) (layer F.Cu) (net 38)) (segment (start 158.505 81.28) (end 158.505 79.239) (width 0.25) (layer F.Cu) (net 38)) (via (at 158.505 79.239) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 38)) (segment (start 158.505 78.673315) (end 151.586685 71.755) (width 0.25) (layer B.Cu) (net 38)) (segment (start 158.505 79.239) (end 158.505 78.673315) (width 0.25) (layer B.Cu) (net 38)) (segment (start 141.245 71.755) (end 138.04 74.96) (width 0.25) (layer B.Cu) (net 38)) (segment (start 151.586685 71.755) (end 141.245 71.755) (width 0.25) (layer B.Cu) (net 38)) (segment (start 125.665 85.155) (end 127.635 85.155) (width 0.25) (layer F.Cu) (net 39)) (segment (start 124.46 86.36) (end 125.665 85.155) (width 0.25) (layer F.Cu) (net 39)) (segment (start 90.577 84.836) (end 97.028 84.836) (width 0.25) (layer F.Cu) (net 42)) (segment (start 88.545 82.804) (end 90.577 84.836) (width 0.25) (layer F.Cu) (net 42)) (segment (start 106.904 74.96) (end 112.64 74.96) (width 0.25) (layer F.Cu) (net 42)) (segment (start 97.028 84.836) (end 106.904 74.96) (width 0.25) (layer F.Cu) (net 42)) )