#!/bin/bash # 设置脚本版本号 SCRIPT_VERSION="1.0.0" original_lc_all=$LC_ALL # 定义main函数，确保脚本被调用时执行主菜单 main() { # 此函数将在脚本被直接执行时调用 # 确保菜单正常显示并处理用户输入 : } # 处理命令行参数 if [[ "$1" == "--download" || "$1" == "caidan" ]]; then echo -e "\033[32m正在执行一键安装...\033[0m" # 创建安装目录 mkdir -p /etc/caidan # 下载脚本到安装目录（如果是通过curl|bash方式安装） if [[ "$1" == "caidan" ]]; then curl -fsSL https://raw.githubusercontent.com/LeoJyenn/hinas/main/caidan.sh -o /etc/caidan/caidan.sh else # 拷贝脚本到安装目录（如果是本地安装） cp "$0" /etc/caidan/caidan.sh fi # 添加执行权限 chmod +x /etc/caidan/caidan.sh # 创建软链接 ln -sf /etc/caidan/caidan.sh /usr/bin/caidan # 修复可能的换行符问题 sed -i 's/\r$//' /etc/caidan/caidan.sh 2>/dev/null echo -e "\033[32m------------------------------------\033[0m" echo -e "\033[32m脚本安装完成，输入 [caidan] 打开脚本\033[0m" echo -e "\033[32m------------------------------------\033[0m" exit 0 fi # 加载代理环境变量（如果已配置） if grep -q 'export.*_proxy=' ~/.bashrc; then # 从.bashrc提取代理设置并直接应用到当前会话 proxy_https=$(grep 'export https_proxy=' ~/.bashrc | cut -d'"' -f2) proxy_http=$(grep 'export http_proxy=' ~/.bashrc | cut -d'"' -f2) proxy_all=$(grep 'export all_proxy=' ~/.bashrc | cut -d'"' -f2) # 只有在变量为空时才设置，避免覆盖已经设置的值 [ -n "$proxy_https" ] && [ -z "$https_proxy" ] && export https_proxy="$proxy_https" [ -n "$proxy_http" ] && [ -z "$http_proxy" ] && export http_proxy="$proxy_http" [ -n "$proxy_all" ] && [ -z "$all_proxy" ] && export all_proxy="$proxy_all" fi # 颜色定义 RED='\e[91m' GREEN='\e[92m' YELLOW='\e[93m' BLUE='\e[94m' MAGENTA='\e[95m' CYAN='\e[96m' WHITE='\e[97m' BOLD='\e[1m' NC='\e[0m' # No Color # IP IP=$(ifconfig eth0 | grep '\' | grep -v '127.0.0.1' | awk '{print $2}' | awk 'NR==1') # 初始化安装目录 function mkdirTools() { mkdir -p /etc/caidan } # 脚本快捷方式安装 function install-caidan() { if [[ -f "./caidan.sh" ]]; then mkdir -p /etc/caidan mv ./caidan.sh /etc/caidan/caidan.sh chmod +x /etc/caidan/caidan.sh ln -sf /etc/caidan/caidan.sh /usr/bin/caidan echo -e "${GREEN}------------------------------------${NC}" echo -e "${GREEN}脚本安装完成，输入 [caidan] 打开脚本${NC}" echo -e "${GREEN}------------------------------------${NC}" exit 0 fi } # 更新脚本 - 此函数保留兼容性，实际更新逻辑已移至主菜单 function renew-caidan() { echo -e "${YELLOW}正在使用兼容模式更新脚本...${NC}" # 创建备份 backup_path="/etc/caidan/caidan.sh.backup-$(date +%Y%m%d%H%M%S)" if [ -f "/etc/caidan/caidan.sh" ]; then cp /etc/caidan/caidan.sh "$backup_path" echo -e "${CYAN}已创建备份: $backup_path${NC}" fi # 更新脚本 if curl -s -o /etc/caidan/caidan.sh.new https://raw.githubusercontent.com/LeoJyenn/hinas/refs/heads/main/caidan.sh; then if [ -f "/etc/caidan/caidan.sh.new" ] && [ -s "/etc/caidan/caidan.sh.new" ]; then chmod +x /etc/caidan/caidan.sh.new mv /etc/caidan/caidan.sh.new /etc/caidan/caidan.sh ln -sf /etc/caidan/caidan.sh /usr/bin/caidan echo -e "${GREEN}✓ 脚本更新成功，重新执行 [caidan] 生效${NC}" else echo -e "${RED}✗ 下载的文件不完整${NC}" if [ -f "$backup_path" ]; then echo -e "${YELLOW}正在恢复备份...${NC}" cp "$backup_path" /etc/caidan/caidan.sh fi fi else echo -e "${RED}✗ 更新失败，请检查网络连接${NC}" fi exit 0 } # 卸载脚本 function unInstall-caidan() { echo -e "${RED}是否确认卸载脚本？(y/n)${NC}" read -e -p "(y/n): " unInstallStatus if [[ "$unInstallStatus" == "y" ]]; then rm -rf /etc/caidan rm -f /usr/bin/caidan echo -e "${GREEN}------------------------------------${NC}" echo -e "${GREEN}脚本卸载完成${NC}" echo -e "${GREEN}------------------------------------${NC}" exit 0 elif [[ "$unInstallStatus" == "n" ]]; then echo -e "${RED}取消卸载${NC}" else echo -e "${RED}无效的选择${NC}" fi echo "按任意键继续..." read -n 1 -s -r -p "" } # 获取远程脚本版本号 function get_remote_version() { local remote_version="" remote_version=$(curl -s --connect-timeout 10 -m 15 https://raw.githubusercontent.com/LeoJyenn/hinas/main/caidan.sh | grep -m1 "^SCRIPT_VERSION=" | cut -d'"' -f2) echo "$remote_version" } # 比较版本号 function compare_versions() { local current="$1" local remote="$2" if [ -z "$remote" ]; then echo "unknown" return fi # 简单的版本比较，将来可以改进为更复杂的语义版本比较 if [ "$current" = "$remote" ]; then echo "equal" else IFS='.' read -ra CURRENT_ARR <<< "$current" IFS='.' read -ra REMOTE_ARR <<< "$remote" for ((i=0; i<${#CURRENT_ARR[@]} && i<${#REMOTE_ARR[@]}; i++)); do if [ "${CURRENT_ARR[$i]}" -lt "${REMOTE_ARR[$i]}" ]; then echo "older" return elif [ "${CURRENT_ARR[$i]}" -gt "${REMOTE_ARR[$i]}" ]; then echo "newer" return fi done if [ ${#CURRENT_ARR[@]} -lt ${#REMOTE_ARR[@]} ]; then echo "older" elif [ ${#CURRENT_ARR[@]} -gt ${#REMOTE_ARR[@]} ]; then echo "newer" else echo "equal" fi fi } mkdirTools install-caidan # 绘制菜单标题 function print_menu_header() { local title="$1" local width=70 # 计算中文字符数量（每个中文字符在终端中占两个字符宽度） local chinese_count=$(echo "$title" | grep -o -P '\p{Han}' | wc -l) # 计算实际显示宽度（英文+中文*2） local display_width=$((${#title} + chinese_count)) # 计算左侧填充空格数 local left_padding=$(((width - display_width) / 2)) # 计算右侧填充空格数 local right_padding=$((width - display_width - left_padding)) # 生成标题栏 echo -e "${BLUE}┌$(printf '%.0s─' $(seq 1 $width))┐${NC}" echo -e "${BLUE}│${BOLD}${YELLOW}$(printf '%*s' $left_padding '')$title$(printf '%*s' $right_padding '')${NC}${BLUE}│${NC}" echo -e "${BLUE}└$(printf '%.0s─' $(seq 1 $width))┘${NC}" } # 绘制菜单选项 function print_menu_option() { local number="$1" local text="$2" local color="${3:-$YELLOW}" echo -e " ${BOLD}${color}[$number]${NC} $text" } # 绘制菜单分隔线 function print_menu_separator() { echo -e "${BLUE}──────────────────────────────────────────────────────────────────────${NC}" } while true; do clear echo -e "${CYAN} _ _ _ ____ _ / \ __| | _ __ ___ (_) _ __ | _ \ __ _ _ __ ___ | | / _ \ / _ | | _ _ \ | | | _ \ | |_) | / _ | | _ \ / _ \ | | / ___ \ | (_| | | | | | | | | | | | | | | __/ | (_| | | | | | | __/ | | /_/ \_\ \__,_| |_| |_| |_| |_| |_| |_| |_| \__,_| |_| |_| \___| |_| ${NC}" # 主菜单 print_menu_header "海纳思系统管理菜单" print_menu_option "1 " "常用功能" print_menu_option "2 " "中文语言包" print_menu_option "3 " "系统检查" print_menu_option "4 " "Aria2、BT" print_menu_option "5 " "网络测速" print_menu_option "6 " "格式化U盘、TF卡" print_menu_option "7 " "Docker" print_menu_option "8 " "Cockpit" print_menu_option "9 " "系统迁移" print_menu_option "10" "Tailscale" # 检查代理状态并显示 function check_proxy_status() { local v2ray_running=false local proxy_configured=false # 检查v2ray服务是否运行 if systemctl is-active --quiet v2ray 2>/dev/null; then v2ray_running=true fi # 检查代理是否在.bashrc中配置 if grep -q 'export.*_proxy=' ~/.bashrc; then proxy_configured=true fi # 优先检查当前会话是否有代理环境变量 if [ -n "$https_proxy" ] || [ -n "$http_proxy" ] || [ -n "$all_proxy" ]; then if [ "$v2ray_running" = true ]; then echo "${GREEN}[活跃]${NC}" else echo "${YELLOW}[已配置但服务未运行]${NC}" fi # 其次检查是否在.bashrc中配置了但未加载到当前会话 elif [ "$proxy_configured" = true ]; then if [ "$v2ray_running" = true ]; then echo "${YELLOW}[配置未激活]${NC}" else echo "${YELLOW}[配置未激活,服务未运行]${NC}" fi else echo "${RED}[未激活]${NC}" fi } print_menu_option "11" "socks5服务功能 $(check_proxy_status)" print_menu_separator # 系统命令选项，使用简化字母命令 echo -e " ${BOLD}${RED}[a]${NC} 系统更新和软件更新 ${BOLD}${RED}[b]${NC} 系统还原" echo -e " ${BOLD}${RED}[c]${NC} 更新脚本 ${BOLD}${RED}[d]${NC} 修改root密码" echo -e " ${BOLD}${RED}[e]${NC} 卸载脚本 ${BOLD}${RED}[f]${NC} 重启系统" echo -e " ${BOLD}${RED}[q]${NC} 退出" # 获取输入 echo read -e -p "请输入选项: " choice case $choice in 1) #常用功能菜单 while true; do clear print_menu_header "常用功能" print_menu_option "1" "搜索文件" print_menu_option "2" "重启网络服务" print_menu_option "3" "清理缓存" print_menu_option "4" "Swap设置" print_menu_option "5" "粒子动态背景" print_menu_option "6" "优化DNS" print_menu_option "7" "恢复DNS" print_menu_option "8" "Nginx管理" print_menu_option "9" "USB共享文件夹" print_menu_option "q" "返回" $RED echo read -e -p "请输入选项: " choice #搜索文件和文件夹 function search_files() { read -e -p "请输入要搜索的关键词: " keyword read -e -p "请输入要搜索的目录路径（按 Enter 键跳过，整个系统搜索）: " search_path if [ -z "$search_path" ]; then # 如果未提供搜索路径，使用整个系统 search_path="/" fi echo -e "正在搜索目录 '$search_path' 中包含关键词 '$keyword' 的文件和文件夹..." # 使用 find 命令搜索，使用 CYAN 颜色显示 result=$(find "$search_path" -iname "*$keyword*" 2>/dev/null) if [ -n "$result" ]; then echo -e "$result" | while read -r entry; do echo -e "${CYAN}$entry${NC}" done echo "搜索完成，找到的文件和文件夹如上所示" else echo "未找到包含关键词 '$keyword' 的文件和文件夹" fi } function cleanup() { clear print_menu_header "系统清理工具" # 获取磁盘使用状态 disk_usage=$(df -h / | awk 'NR==2 {print $5}') disk_free=$(df -h / | awk 'NR==2 {print $4}') echo -e "${CYAN}当前系统状态: 使用率 ${YELLOW}$disk_usage${CYAN} (剩余空间: ${GREEN}$disk_free${CYAN})${NC}\n" print_menu_option "1" "标准清理 (安全清理缓存和临时文件)" print_menu_option "2" "深度清理 (包括系统日志和备份)" print_menu_option "3" "高级清理 (删除未使用的依赖和内核)" print_menu_option "4" "优化服务 (禁用不必要的系统服务)" print_menu_option "5" "全面系统清理 (执行所有清理操作)" print_menu_option "q" "返回" $RED echo read -e -p "请选择清理级别: " clean_level case "$clean_level" in 1) # 标准清理 echo -e "\n${YELLOW}执行标准清理...${NC}" echo -e "${CYAN}清理APT缓存...${NC}" sudo apt-get clean echo -e "${CYAN}清理临时文件...${NC}" sudo rm -rf /tmp/.[!.]* /tmp/..?* /tmp/* echo -e "${CYAN}清理用户缓存...${NC}" rm -rf ~/.cache/* echo -e "${CYAN}清理回收站...${NC}" rm -rf ~/.local/share/Trash/* echo -e "${CYAN}清理软件包缓存...${NC}" sudo apt-get autoclean # 获取清理后的磁盘使用情况 disk_after=$(df -h / | awk 'NR==2 {print $4}') echo -e "\n${GREEN}✓ 标准清理完成!${NC}" echo -e "${CYAN}当前可用空间: $disk_after${NC}" ;; 2) # 深度清理 echo -e "\n${YELLOW}执行深度清理...${NC}" # 先执行标准清理 echo -e "${CYAN}执行标准清理步骤...${NC}" sudo apt-get clean sudo rm -rf /tmp/.[!.]* /tmp/..?* /tmp/* rm -rf ~/.cache/* rm -rf ~/.local/share/Trash/* sudo apt-get autoclean # 深度清理特有步骤，先扫描文件 echo -e "\n${YELLOW}扫描需要清理的文件...${NC}" echo -e "${CYAN}扫描系统日志...${NC}" journal_size=$(sudo journalctl --disk-usage | awk '{print $7 " " $8}') echo -e "${YELLOW}当前日志大小：${journal_size}${NC}" echo -e "\n${CYAN}扫描旧的备份文件...${NC}" backup_files=$(sudo find /var/backups -name "*.old" 2>/dev/null | head -n 10) backup_count=$(sudo find /var/backups -name "*.old" 2>/dev/null | wc -l) if [ -n "$backup_files" ]; then echo -e "${YELLOW}找到 $backup_count 个旧备份文件，示例：${NC}" echo "$backup_files" if [ $backup_count -gt 10 ]; then echo -e "${YELLOW}... 还有 $((backup_count - 10)) 个文件未显示${NC}" fi else echo -e "${GREEN}未发现旧备份文件${NC}" fi echo -e "\n${CYAN}扫描旧的安装包...${NC}" deb_files=$(sudo find /var/cache/apt/archives -name "*.deb" 2>/dev/null | head -n 10) deb_count=$(sudo find /var/cache/apt/archives -name "*.deb" 2>/dev/null | wc -l) deb_size=$(du -sh /var/cache/apt/archives 2>/dev/null | awk '{print $1}') if [ -n "$deb_files" ]; then echo -e "${YELLOW}找到 $deb_count 个安装包，总大小约 $deb_size，示例：${NC}" echo "$deb_files" if [ $deb_count -gt 10 ]; then echo -e "${YELLOW}... 还有 $((deb_count - 10)) 个文件未显示${NC}" fi else echo -e "${GREEN}未发现旧的安装包${NC}" fi echo -e "\n${CYAN}扫描临时数据文件...${NC}" temp_count=$(sudo find /var/tmp -type f 2>/dev/null | wc -l) temp_size=$(du -sh /var/tmp 2>/dev/null | awk '{print $1}') echo -e "${YELLOW}临时目录包含 $temp_count 个文件，总大小约 $temp_size${NC}" echo -e "\n${CYAN}扫描遗留的日志文件...${NC}" log_files=$(sudo find /var/log -type f \( -name "*.gz" -o -name "*.old" -o -name "*.1" -o -regex '.*\.[0-9]+\(\.gz\)?' \) 2>/dev/null | head -n 10) log_count=$(sudo find /var/log -type f \( -name "*.gz" -o -name "*.old" -o -name "*.1" -o -regex '.*\.[0-9]+\(\.gz\)?' \) 2>/dev/null | wc -l) log_size=$(du -sh /var/log 2>/dev/null | awk '{print $1}') if [ -n "$log_files" ]; then echo -e "${YELLOW}找到 $log_count 个日志文件，总日志目录大小约 $log_size，示例：${NC}" echo "$log_files" if [ $log_count -gt 10 ]; then echo -e "${YELLOW}... 还有 $((log_count - 10)) 个文件未显示${NC}" fi else echo -e "${GREEN}未发现遗留的日志文件${NC}" fi # 询问用户是否继续清理 echo -e "\n${RED}是否继续执行深度清理? (y/n)${NC}" read -e -p "" confirm_deep_clean if [[ "$confirm_deep_clean" == "y" || "$confirm_deep_clean" == "Y" ]]; then echo -e "\n${YELLOW}开始执行深度清理...${NC}" echo -e "${CYAN}清理系统日志...${NC}" sudo journalctl --vacuum-time=3d echo -e "${CYAN}清理旧的备份文件...${NC}" sudo rm -rf /var/backups/*.old 2>/dev/null echo -e "${CYAN}清理旧的安装包...${NC}" sudo rm -rf /var/cache/apt/archives/*.deb echo -e "${CYAN}清理临时数据目录...${NC}" sudo rm -rf /var/tmp/.[!.]* /var/tmp/..?* /var/tmp/* 2>/dev/null echo -e "${CYAN}清理遗留的日志文件...${NC}" sudo find /var/log -type f -name "*.gz" -o -name "*.old" -o -name "*.1" | xargs sudo rm -f 2>/dev/null sudo find /var/log -type f -regex '.*\.[0-9]+\(\.gz\)?' | xargs sudo rm -f 2>/dev/null echo -e "\n${GREEN}✓ 深度清理完成!${NC}" else echo -e "${YELLOW}已取消深度清理${NC}" fi ;; 3) # 高级清理 echo -e "\n${YELLOW}执行高级清理 (依赖和内核)...${NC}" echo -e "\n${YELLOW}扫描需要清理的内容...${NC}" # 扫描未使用的依赖项 echo -e "${CYAN}扫描未使用的依赖项...${NC}" unused_deps=$(apt-get autoremove --dry-run | grep -oP '(?<=以下软件包将被卸载：\n).*?(?=\n\n升级了)' || apt-get autoremove --dry-run | grep -oP '(?<=The following packages will be REMOVED:).*?(?=\n\n\d+)' | tr -d '\n') if [ -n "$unused_deps" ]; then unused_deps_count=$(echo "$unused_deps" | wc -w) echo -e "${YELLOW}发现 $unused_deps_count 个未使用的依赖项:${NC}" echo -e "$unused_deps" else echo -e "${GREEN}未发现未使用的依赖项${NC}" fi # 扫描旧内核 echo -e "\n${CYAN}扫描旧版本的Linux内核...${NC}" current_kernel=$(uname -r) old_kernels=$(dpkg -l | awk '/^ii linux-image-.*[0-9]/{print $2}' | grep -v "$current_kernel") if [ -n "$old_kernels" ]; then old_kernels_count=$(echo "$old_kernels" | wc -l) kernel_size=$(du -sch /boot/* 2>/dev/null | tail -n 1 | awk '{print $1}') echo -e "${YELLOW}发现 $old_kernels_count 个旧内核，当前使用: $current_kernel${NC}" echo -e "${YELLOW}/boot 目录大小约: $kernel_size${NC}" echo -e "${YELLOW}旧内核列表:${NC}" echo "$old_kernels" else echo -e "${GREEN}未发现旧内核${NC}" fi # 扫描未完全卸载的软件包 echo -e "\n${CYAN}扫描未完全卸载的软件包...${NC}" dpkg_removed=$(dpkg -l | grep "^rc" | awk '{print $2}') if [ -n "$dpkg_removed" ]; then dpkg_removed_count=$(echo "$dpkg_removed" | wc -w) echo -e "${YELLOW}发现 $dpkg_removed_count 个未完全卸载的软件包:${NC}" echo "$dpkg_removed" else echo -e "${GREEN}未发现未完全卸载的软件包${NC}" fi # 扫描旧的Snap包 if command -v snap &>/dev/null; then echo -e "\n${CYAN}扫描旧的Snap包...${NC}" disabled_snaps=$(snap list --all | grep disabled | awk '{print $1, "版本:",$3, "状态:", $6}') if [ -n "$disabled_snaps" ]; then disabled_snaps_count=$(snap list --all | grep disabled | wc -l) echo -e "${YELLOW}发现 $disabled_snaps_count 个旧版本的Snap包:${NC}" echo "$disabled_snaps" else echo -e "${GREEN}未发现旧的Snap包${NC}" fi fi # 扫描Flatpak残留 if command -v flatpak &>/dev/null; then echo -e "\n${CYAN}扫描Flatpak残留...${NC}" flatpak_unused=$(flatpak uninstall --unused --dry-run 2>&1) if echo "$flatpak_unused" | grep -q "unused"; then echo -e "${YELLOW}发现Flatpak残留:${NC}" echo "$flatpak_unused" else echo -e "${GREEN}未发现Flatpak残留${NC}" fi fi # 总结内存可以释放的空间 echo -e "\n${RED}警告: 此操作将移除上述已扫描出的未使用软件包和旧内核。确认继续? (y/n)${NC}" read -e -p "" confirm if [[ "$confirm" == "y" || "$confirm" == "Y" ]]; then echo -e "\n${YELLOW}开始执行高级清理...${NC}" echo -e "${CYAN}删除未使用的依赖项...${NC}" sudo apt-get autoremove -y echo -e "${CYAN}删除旧版本的Linux内核...${NC}" if [ -n "$old_kernels" ]; then echo -e "${YELLOW}正在删除...${NC}" sudo apt-get purge -y $old_kernels else echo -e "${CYAN}未发现旧内核${NC}" fi echo -e "${CYAN}清理未完全卸载的软件包...${NC}" if [ -n "$dpkg_removed" ]; then echo -e "${YELLOW}正在清理...${NC}" sudo dpkg --purge $dpkg_removed else echo -e "${CYAN}未发现未完全卸载的软件包${NC}" fi echo -e "${CYAN}检查Snap包...${NC}" if command -v snap &>/dev/null; then # 保留当前及前一个版本，删除更旧的版本 snap_count=0 while read snapname revision; do if [ -n "$snapname" ] && [ -n "$revision" ]; then sudo snap remove "$snapname" --revision="$revision" ((snap_count++)) fi done < <(sudo snap list --all | awk '/disabled/{print $1, $3}') if [ $snap_count -gt 0 ]; then echo -e "${GREEN}✓ 已清理 $snap_count 个旧的Snap包${NC}" fi fi echo -e "${CYAN}检查Flatpak残留...${NC}" if command -v flatpak &>/dev/null; then sudo flatpak uninstall --unused -y fi echo -e "\n${GREEN}✓ 高级清理完成!${NC}" else echo -e "${YELLOW}已取消高级清理${NC}" fi ;; 4) # 优化服务 echo -e "\n${YELLOW}分析系统服务...${NC}" # 创建常见非必要服务列表 declare -A services_desc=( ["bluetooth.service"]="蓝牙服务 - 如果不使用蓝牙设备可禁用" ["cups.service"]="打印服务 - 如果不需要打印功能可禁用" ["avahi-daemon.service"]="局域网设备发现服务 - 局域网内设备发现" ["ModemManager.service"]="调制解调器管理服务 - 如不使用调制解调器可禁用" ["whoopsie.service"]="Ubuntu崩溃报告服务 - 用于发送崩溃报告" ["snapd.service"]="Snap包管理服务 - 如不使用snap可禁用" ["apt-daily.service"]="APT自动更新服务 - 自动检查更新" ["apt-daily-upgrade.service"]="APT自动升级服务" ["multipathd.service"]="多路径设备管理服务 - 服务器存储多路径" ["speech-dispatcher.service"]="语音调度服务 - 语音合成" ) # 列出正在运行的服务 echo -e "${CYAN}检测非必要服务...${NC}" echo -e "${YELLOW}===================${NC}" running_services=() for service in "${!services_desc[@]}"; do if systemctl is-active --quiet "$service" 2>/dev/null; then running_services+=("$service") status="${GREEN}运行中${NC}" else status="${RED}已停止${NC}" fi echo -e "${CYAN}[$service]${NC} - ${services_desc[$service]} - $status" done if [ ${#running_services[@]} -eq 0 ]; then echo -e "\n${CYAN}未发现可优化的非必要服务${NC}" else echo -e "\n${YELLOW}发现以下非必要服务正在运行:${NC}" for ((i = 0; i < ${#running_services[@]}; i++)); do service=${running_services[$i]} echo -e "$((i + 1)). ${CYAN}${service}${NC} - ${services_desc[$service]}" done echo -e "\n${YELLOW}输入服务编号以禁用，多个服务用空格分隔 (例如: 1 3)，或按Enter跳过${NC}" read -e -p "要禁用的服务: " services_to_disable if [ -n "$services_to_disable" ]; then for num in $services_to_disable; do if [[ "$num" =~ ^[0-9]+$ ]] && [ "$num" -ge 1 ] && [ "$num" -le ${#running_services[@]} ]; then service=${running_services[$((num - 1))]} echo -e "${YELLOW}正在禁用 $service...${NC}" sudo systemctl stop "$service" sudo systemctl disable "$service" echo -e "${GREEN}✓ $service 已禁用${NC}" fi done echo -e "\n${GREEN}✓ 服务优化完成!${NC}" else echo -e "${YELLOW}未选择任何服务，跳过优化${NC}" fi fi ;; 5) # 全面系统清理 echo -e "\n${YELLOW}执行全面系统清理...${NC}" # 执行全面扫描 echo -e "\n${YELLOW}开始全面系统扫描...${NC}" # 1. 扫描标准清理内容 echo -e "\n${CYAN}1. 扫描标准清理内容${NC}" echo -e "${CYAN}临时文件占用空间情况:${NC}" tmp_size=$(du -sh /tmp 2>/dev/null | awk '{print $1}') tmp_count=$(find /tmp -type f 2>/dev/null | wc -l) echo -e "${YELLOW}/tmp 目录大小: $tmp_size, 文件数: $tmp_count${NC}" echo -e "${CYAN}用户缓存占用空间:${NC}" cache_size=$(du -sh ~/.cache 2>/dev/null | awk '{print $1}') echo -e "${YELLOW}~/.cache 目录大小: $cache_size${NC}" echo -e "${CYAN}回收站占用空间:${NC}" trash_size=$(du -sh ~/.local/share/Trash 2>/dev/null | awk '{print $1}') echo -e "${YELLOW}回收站大小: $trash_size${NC}" # 2. 扫描深度清理内容 echo -e "\n${CYAN}2. 扫描深度清理内容${NC}" echo -e "${CYAN}系统日志大小:${NC}" journal_size=$(sudo journalctl --disk-usage 2>/dev/null | awk '{print $7 " " $8}') echo -e "${YELLOW}journalctl 日志大小: $journal_size${NC}" echo -e "${CYAN}备份文件:${NC}" backup_count=$(sudo find /var/backups -name "*.old" 2>/dev/null | wc -l) backup_size=$(du -sh /var/backups 2>/dev/null | awk '{print $1}') echo -e "${YELLOW}备份文件数量: $backup_count, 目录大小: $backup_size${NC}" echo -e "${CYAN}旧安装包:${NC}" deb_count=$(find /var/cache/apt/archives -name "*.deb" 2>/dev/null | wc -l) deb_size=$(du -sh /var/cache/apt/archives 2>/dev/null | awk '{print $1}') echo -e "${YELLOW}安装包数量: $deb_count, 大小: $deb_size${NC}" echo -e "${CYAN}日志文件:${NC}" log_size=$(du -sh /var/log 2>/dev/null | awk '{print $1}') log_count=$(find /var/log -type f \( -name "*.gz" -o -name "*.old" -o -name "*.1" \) 2>/dev/null | wc -l) echo -e "${YELLOW}日志目录大小: $log_size, 旧日志文件数: $log_count${NC}" # 3. 扫描高级清理内容 echo -e "\n${CYAN}3. 扫描高级清理内容${NC}" echo -e "${CYAN}未使用的依赖项:${NC}" unused_deps=$(apt-get autoremove --dry-run | grep -oP '(?<=以下软件包将被卸载：\n).*?(?=\n\n升级了)' || apt-get autoremove --dry-run | grep -oP '(?<=The following packages will be REMOVED:).*?(?=\n\n\d+)' | tr -d '\n') if [ -n "$unused_deps" ]; then unused_deps_count=$(echo "$unused_deps" | wc -w) echo -e "${YELLOW}未使用的依赖项数量: $unused_deps_count${NC}" else echo -e "${GREEN}未发现未使用的依赖项${NC}" fi echo -e "${CYAN}旧内核:${NC}" old_kernels=$(dpkg -l | awk '/^ii linux-image-.*[0-9]/{print $2}' | grep -v "$(uname -r)") if [ -n "$old_kernels" ]; then old_kernels_count=$(echo "$old_kernels" | wc -l) echo -e "${YELLOW}旧内核数量: $old_kernels_count${NC}" else echo -e "${GREEN}未发现旧内核${NC}" fi echo -e "${CYAN}未完全卸载的软件包:${NC}" dpkg_removed=$(dpkg -l | grep "^rc" | awk '{print $2}') if [ -n "$dpkg_removed" ]; then dpkg_removed_count=$(echo "$dpkg_removed" | wc -w) echo -e "${YELLOW}未完全卸载软件包数量: $dpkg_removed_count${NC}" else echo -e "${GREEN}未发现未完全卸载的软件包${NC}" fi # 4. 其他清理内容 echo -e "\n${CYAN}4. 其他清理项目${NC}" if [ -d ~/.cache/tracker ]; then tracker_size=$(du -sh ~/.cache/tracker 2>/dev/null | awk '{print $1}') echo -e "${YELLOW}搜索索引缓存大小: $tracker_size${NC}" fi if [ -d ~/.thumbnails ] || [ -d ~/.cache/thumbnails ]; then thumb_size=$(du -sh ~/.thumbnails ~/.cache/thumbnails 2>/dev/null | awk '{sum += $1; print sum}') echo -e "${YELLOW}缩略图缓存大小: $thumb_size${NC}" fi if [ -d ~/.mozilla/firefox ] || [ -d ~/.config/google-chrome ]; then browser_cache=0 if [ -d ~/.mozilla/firefox ]; then firefox_size=$(du -sh ~/.mozilla/firefox 2>/dev/null | awk '{print $1}') echo -e "${YELLOW}Firefox缓存大小: $firefox_size${NC}" fi if [ -d ~/.config/google-chrome ]; then chrome_size=$(du -sh ~/.config/google-chrome/Default/Cache ~/.config/google-chrome/Default/Code\ Cache 2>/dev/null | awk '{print $1}') echo -e "${YELLOW}Chrome缓存大小: $chrome_size${NC}" fi fi # 获取磁盘使用状况 disk_usage=$(df -h / | awk 'NR==2 {print $5}') disk_free=$(df -h / | awk 'NR==2 {print $4}') echo -e "\n${CYAN}当前系统状态: 使用率 ${YELLOW}$disk_usage${CYAN} (剩余空间: ${GREEN}$disk_free${CYAN})${NC}\n" echo -e "${RED}警告: 此操作将执行所有清理步骤，可能需要一些时间。确认继续? (y/n)${NC}" read -e -p "" confirm if [[ "$confirm" == "y" || "$confirm" == "Y" ]]; then disk_usage_before=$(df -h / | awk 'NR==2 {print $4}') echo -e "${CYAN}清理前可用空间: $disk_usage_before${NC}" # 标准清理 echo -e "\n${YELLOW}1. 执行标准清理...${NC}" sudo apt-get clean sudo rm -rf /tmp/.[!.]* /tmp/..?* /tmp/* 2>/dev/null rm -rf ~/.cache/* 2>/dev/null rm -rf ~/.local/share/Trash/* 2>/dev/null sudo apt-get autoclean # 深度清理 echo -e "\n${YELLOW}2. 执行深度清理...${NC}" sudo journalctl --vacuum-time=3d sudo rm -rf /var/backups/*.old 2>/dev/null sudo rm -rf /var/cache/apt/archives/*.deb sudo rm -rf /var/tmp/.[!.]* /var/tmp/..?* /var/tmp/* 2>/dev/null sudo find /var/log -type f -name "*.gz" -o -name "*.old" -o -name "*.1" | xargs sudo rm -f 2>/dev/null sudo find /var/log -type f -regex '.*\.[0-9]+\(\.gz\)?' | xargs sudo rm -f 2>/dev/null # 高级清理 echo -e "\n${YELLOW}3. 执行高级清理...${NC}" sudo apt-get autoremove -y old_kernels=$(dpkg -l | awk '/^ii linux-image-.*[0-9]/{print $2}' | grep -v "$(uname -r)") if [ -n "$old_kernels" ]; then sudo apt-get purge -y $old_kernels fi dpkg_removed=$(dpkg -l | grep "^rc" | awk '{print $2}') if [ -n "$dpkg_removed" ]; then sudo dpkg --purge $dpkg_removed fi # 清理搜索索引 echo -e "\n${YELLOW}4. 清理搜索索引...${NC}" if [ -d ~/.cache/tracker ]; then rm -rf ~/.cache/tracker/* 2>/dev/null fi # 如果系统有mlocate，更新数据库 if command -v updatedb &>/dev/null; then sudo updatedb fi # 清理缩略图 echo -e "\n${YELLOW}5. 清理缩略图缓存...${NC}" rm -rf ~/.thumbnails/* 2>/dev/null rm -rf ~/.cache/thumbnails/* 2>/dev/null # 清理Firefox/Chrome缓存(如果存在) echo -e "\n${YELLOW}6. 清理浏览器缓存...${NC}" if [ -d ~/.mozilla/firefox ]; then find ~/.mozilla/firefox -name "*.sqlite" | xargs -I{} sqlite3 "{}" "VACUUM;" fi if [ -d ~/.config/google-chrome ]; then rm -rf ~/.config/google-chrome/Default/Cache/* 2>/dev/null rm -rf ~/.config/google-chrome/Default/Code\ Cache/* 2>/dev/null fi disk_usage_after=$(df -h / | awk 'NR==2 {print $4}') echo -e "\n${GREEN}✓ 全面系统清理完成!${NC}" echo -e "${CYAN}清理前可用空间: $disk_usage_before${NC}" echo -e "${CYAN}清理后可用空间: $disk_usage_after${NC}" else echo -e "${YELLOW}已取消全面系统清理${NC}" fi ;; q | Q) return ;; *) echo -e "${RED}无效的选择${NC}" ;; esac echo -e "\n${CYAN}清理操作已完成，系统现在更加整洁!${NC}" } # Swap设置脚本 function swap() { read -e -p "请输入 vm.swappiness 的值 (回车默认为 60): " swappiness_value # 如果没有输入，默认值为 60 swappiness_value=${swappiness_value:-60} # 检查是否已存在 vm.swappiness 的设置 if grep -q "^vm.swappiness" /etc/sysctl.conf; then # 如果已存在，使用 sed 替换 sed -i "s/^vm.swappiness.*/vm.swappiness = $swappiness_value/" /etc/sysctl.conf else # 如果不存在，追加新的设置 echo "vm.swappiness = $swappiness_value" >>/etc/sysctl.conf fi # 停止交换文件 sudo swapoff /swapfile # 选择Swap文件大小，默认为1024MB read -e -p "请输入Swap交换区大小（回车默认为1024M）: " swap_size # 如果没有输入值，则使用默认值 1024M if [ -z "$swap_size" ]; then swap_size=1024 fi # 调整交换文件大小 swapfile="/swapfile" # 交换文件路径不存在时创建 sudo dd if=/dev/zero of=$swapfile bs=1M count=$swap_size status=progress sudo chmod 600 $swapfile sudo mkswap $swapfile # 启用交换文件 sudo swapon $swapfile # 显示设置信息 free -h echo -e "${GREEN}Swap交换区创建完成，大小为 ${swap_size}MB${NC}" cat /proc/sys/vm/swappiness echo -e "${GREEN}vm.swappiness 设置为 $swappiness_value${NC}" echo -e "${RED}请注意，这些更改将在下次启动时生效。${NC}" # 提示是否重启 read -e -p "是否重启设备以使更改生效？ (y/n): " confirm_reboot if [ "$confirm_reboot" = "y" ]; then echo "正在重启设备..." sudo reboot else echo -e "${RED}取消重启，请手动重启系统以使配置生效${NC}" fi } # 粒子动态背景 function backdrop() { curl -o /var/www/html/img/icloud.png \ -o /var/www/html/home.php \ -o /var/www/html/index.php \ https://raw.githubusercontent.com/LX-webo/hinas/main/icloud.png \ https://raw.githubusercontent.com/LX-webo/hinas/main/home.php \ https://raw.githubusercontent.com/LX-webo/hinas/main/index.php echo -e "${GREEN}背景更换成功，清除浏览器缓存刷新${NC}" } # 添加DNS function DNS() { # 备份原始文件 if [ ! -f "/etc/resolv.conf.backup" ]; then if ! cp /etc/resolv.conf /etc/resolv.conf.backup 2>/dev/null; then echo -e "${RED}错误: 无法创建DNS配置文件备份${NC}" return 1 fi echo -e "${CYAN}已创建DNS配置备份${NC}" fi # 直接写入新配置，使用多行echo代替here-document { echo "# 手动设置的DNS配置 - 由caidan脚本设置" echo "nameserver 8.8.8.8 # Google DNS" echo "nameserver 114.114.114.114 # 114DNS" echo "nameserver 1.1.1.1 # Cloudflare DNS" echo "nameserver 223.5.5.5 # 阿里DNS" echo "nameserver 119.29.29.29 # 腾讯DNS" echo "nameserver 101.226.4.6 # 360 DNS" } >/etc/resolv.conf # 检查写入是否成功 if [ $? -ne 0 ]; then echo -e "${RED}错误: 无法写入DNS配置文件${NC}" return 1 fi # 设置文件为不可变，防止系统覆盖 if ! chattr +i /etc/resolv.conf 2>/dev/null; then echo -e "${YELLOW}警告: 无法设置文件为不可变，系统可能会自动覆盖DNS设置${NC}" echo -e "${YELLOW}这通常发生在某些文件系统(如FAT)上，或者权限不足${NC}" else echo -e "${GREEN}已设置为不可变以防止系统自动覆盖${NC}" fi echo -e "${GREEN}DNS修改成功，添加了多个常用DNS服务器${NC}" echo -e "${YELLOW}如需恢复原始设置，请使用恢复DNS选项${NC}" return 0 } # 添加恢复DNS功能 function restore_dns() { # 移除不可变属性 if ! chattr -i /etc/resolv.conf 2>/dev/null; then echo -e "${YELLOW}警告: 无法移除文件不可变属性，可能不影响后续操作${NC}" fi # 恢复备份 if [ -f "/etc/resolv.conf.backup" ]; then if ! mv /etc/resolv.conf.backup /etc/resolv.conf 2>/dev/null; then echo -e "${RED}错误: 无法恢复DNS配置文件${NC}" return 1 fi echo -e "${GREEN}DNS设置已恢复为原始配置${NC}" else # 如果没有备份，使用默认设置 if ! echo "nameserver 127.0.0.53" >/etc/resolv.conf 2>/dev/null; then echo -e "${RED}错误: 无法重置DNS配置文件${NC}" return 1 fi echo -e "${YELLOW}未找到原始备份，已重置为系统默认DNS${NC}" fi return 0 } # Nginx管理函数 function nginx_manager() { clear print_menu_header "Nginx管理工具" local nginx_installed=false local nginx_running=false local nginx_version="" # 检查Nginx是否已安装 if command -v nginx &>/dev/null; then nginx_installed=true nginx_version=$(nginx -v 2>&1 | grep -oP "nginx/\K[0-9]+\.[0-9]+\.[0-9]+") # 检查Nginx状态 if systemctl is-active --quiet nginx; then nginx_running=true fi fi # 显示Nginx状态 echo -e "${CYAN}Nginx状态:${NC}" if [ "$nginx_installed" = true ]; then echo -e " 安装状态: ${GREEN}已安装${NC} (版本: $nginx_version)" if [ "$nginx_running" = true ]; then echo -e " 运行状态: ${GREEN}运行中${NC}" else echo -e " 运行状态: ${RED}已停止${NC}" fi else echo -e " 安装状态: ${RED}未安装${NC}" fi echo # 显示菜单选项 if [ "$nginx_installed" = false ]; then print_menu_option "1" "安装Nginx" else if [ "$nginx_running" = true ]; then print_menu_option "1" "停止Nginx" print_menu_option "2" "重启Nginx" else print_menu_option "1" "启动Nginx" fi print_menu_option "4" "检查Nginx配置语法" print_menu_option "6" "查看Nginx状态" print_menu_option "7" "查看访问日志" print_menu_option "8" "查看错误日志" print_menu_option "9" "管理站点配置" fi print_menu_option "q" "返回" $RED echo read -e -p "请输入选项: " nginx_choice case "$nginx_choice" in 1) if [ "$nginx_installed" = false ]; then echo -e "${YELLOW}正在安装Nginx...${NC}" # 安装Nginx sudo apt-get update sudo apt-get install -y nginx # 检查安装结果 if command -v nginx &>/dev/null; then echo -e "${GREEN}✓ Nginx安装成功${NC}" # 配置防火墙（如果存在） if command -v ufw &>/dev/null && sudo ufw status | grep -q "Status: active"; then echo -e "${YELLOW}配置防火墙规则...${NC}" sudo ufw allow 'Nginx HTTP' echo -e "${GREEN}✓ 防火墙规则已添加${NC}" fi # 启动Nginx sudo systemctl start nginx sudo systemctl enable nginx echo -e "${GREEN}✓ Nginx服务已启动并设为开机自启${NC}" echo -e "${CYAN}可通过 http://$IP 访问${NC}" else echo -e "${RED}✗ Nginx安装失败${NC}" fi else if [ "$nginx_running" = true ]; then echo -e "${YELLOW}正在停止Nginx...${NC}" sudo systemctl stop nginx echo -e "${GREEN}✓ Nginx已停止${NC}" else echo -e "${YELLOW}正在启动Nginx...${NC}" sudo systemctl start nginx echo -e "${GREEN}✓ Nginx已启动${NC}" fi fi ;; 2) if [ "$nginx_installed" = true ]; then echo -e "${YELLOW}正在重启Nginx...${NC}" sudo systemctl restart nginx echo -e "${GREEN}✓ Nginx已重启${NC}" fi ;; 4) if [ "$nginx_installed" = true ]; then echo -e "${YELLOW}检查Nginx配置语法...${NC}" sudo nginx -t echo -e "\n${YELLOW}按任意键继续...${NC}" read -n 1 -s -r -p "" fi ;; 6) if [ "$nginx_installed" = true ]; then echo -e "${YELLOW}Nginx状态:${NC}" sudo systemctl status nginx echo -e "\n${YELLOW}按任意键继续...${NC}" read -n 1 -s -r -p "" fi ;; 7) if [ "$nginx_installed" = true ]; then echo -e "${YELLOW}Nginx访问日志 (最新50行):${NC}" sudo tail -n 50 /var/log/nginx/access.log echo -e "\n${YELLOW}按任意键继续...${NC}" read -n 1 -s -r -p "" fi ;; 8) if [ "$nginx_installed" = true ]; then echo -e "${YELLOW}Nginx错误日志 (最新50行):${NC}" sudo tail -n 50 /var/log/nginx/error.log echo -e "\n${YELLOW}按任意键继续...${NC}" read -n 1 -s -r -p "" fi ;; 9) if [ "$nginx_installed" = true ]; then # 站点配置管理子菜单 while true; do clear print_menu_header "Nginx站点管理" # 列出可用站点 echo -e "${CYAN}可用站点配置:${NC}" sites_available=() i=1 # 获取所有站点 while read -r site_path; do site_name=$(basename "$site_path") sites_available+=("$site_name") # 检查站点是否已启用 if [ -L "/etc/nginx/sites-enabled/$site_name" ]; then site_status[$i]="${GREEN}已启用${NC}" else site_status[$i]="${RED}已禁用${NC}" fi ((i++)) done < <(find /etc/nginx/sites-available -type f -name "*" | sort) # 计算最长站点名称的长度，用于对齐状态 max_length=0 for ((j = 0; j < ${#sites_available[@]}; j++)); do current_length=${#sites_available[$j]} if ((current_length > max_length)); then max_length=$current_length fi done # 显示站点列表，对齐数字和状态 for ((j = 0; j < ${#sites_available[@]}; j++)); do index=$((j + 1)) site_name=${sites_available[$j]} status=${site_status[$((j + 1))]} # 添加空格保持数字对齐 if [ $index -lt 10 ]; then index_display=" $index" else index_display="$index" fi # 使用printf来对齐站点名称，并确保颜色正确显示 printf " ${CYAN}%s.${NC} %-${max_length}s " "$index_display" "$site_name" # 单独输出状态，以确保颜色正确显示 echo -e "$status" done if [ ${#sites_available[@]} -eq 0 ]; then echo -e " ${YELLOW}未找到任何站点配置${NC}" fi echo print_menu_option "a" "删除站点配置" $RED print_menu_option "b" "启用/禁用站点" print_menu_option "q" "返回" $RED echo read -e -p "请输入选项: " site_choice case "$site_choice" in a) read -e -p "输入要删除的站点编号: " site_num if [[ "$site_num" =~ ^[0-9]+$ ]] && [ "$site_num" -ge 1 ] && [ "$site_num" -le ${#sites_available[@]} ]; then site_name=${sites_available[$((site_num - 1))]} # 确认删除 echo -e "${YELLOW}警告: 您将删除站点配置 ${CYAN}$site_name${YELLOW}${NC}" read -e -p "是否确认删除? (y/n): " confirm_delete if [[ "$confirm_delete" == "y" || "$confirm_delete" == "Y" ]]; then # 如果站点已启用，同时删除符号链接 if [ -L "/etc/nginx/sites-enabled/$site_name" ]; then sudo rm "/etc/nginx/sites-enabled/$site_name" echo -e "${GREEN}✓ 已删除启用的链接${NC}" fi # 删除配置文件 if sudo rm "/etc/nginx/sites-available/$site_name"; then echo -e "${GREEN}✓ 站点配置 $site_name 已成功删除${NC}" # 重载Nginx if sudo nginx -t &>/dev/null; then sudo systemctl reload nginx echo -e "${GREEN}✓ Nginx配置已重载${NC}" else echo -e "${YELLOW}! Nginx配置测试失败，请手动检查配置${NC}" fi else echo -e "${RED}✗ 删除站点配置失败，请检查权限${NC}" fi else echo -e "${YELLOW}已取消删除操作${NC}" fi else echo -e "${RED}✗ 无效的站点编号${NC}" fi ;; b) read -e -p "输入要启用/禁用的站点编号: " site_num if [[ "$site_num" =~ ^[0-9]+$ ]] && [ "$site_num" -ge 1 ] && [ "$site_num" -le ${#sites_available[@]} ]; then site_name=${sites_available[$((site_num - 1))]} # 检查站点状态并切换 if [ -L "/etc/nginx/sites-enabled/$site_name" ]; then # 禁用站点 sudo rm "/etc/nginx/sites-enabled/$site_name" echo -e "${GREEN}✓ 站点 $site_name 已禁用${NC}" else # 启用站点 sudo ln -sf "/etc/nginx/sites-available/$site_name" "/etc/nginx/sites-enabled/$site_name" echo -e "${GREEN}✓ 站点 $site_name 已启用${NC}" fi # 重载Nginx sudo nginx -t && sudo systemctl reload nginx else echo -e "${RED}✗ 无效的站点编号${NC}" fi ;; q | Q) break ;; *) echo -e "${RED}✗ 无效的选择${NC}" sleep 1 ;; esac echo -e "\n${YELLOW}按任意键继续...${NC}" read -n 1 -s -r -p "" done fi ;; q | Q) return ;; *) echo -e "${RED}✗ 无效的选择${NC}" sleep 1 ;; esac } # USB共享文件夹功能 function setup_samba_usb_share() { clear print_menu_header "USB共享文件夹设置" # 用于跟踪是否需要在外部显示"按任意键继续..." local skip_continue_prompt=false # 显示子菜单 echo -e "${CYAN}请选择操作:${NC}" echo -e " ${BOLD}${YELLOW}[1]${NC} 创建共享文件夹" echo -e " ${BOLD}${YELLOW}[2]${NC} 删除共享文件夹" echo -e " ${BOLD}${RED}[q]${NC} 返回" echo read -e -p "请输入选项: " samba_choice case "$samba_choice" in 1) # 创建共享文件夹 # 检查samba是否已安装 if ! command -v smbd &>/dev/null; then echo -e "${YELLOW}Samba服务未安装，正在安装...${NC}" sudo apt-get update sudo apt-get install -y samba if [ $? -ne 0 ]; then echo -e "${RED}Samba安装失败，请检查网络连接或手动安装${NC}" return 1 fi echo -e "${GREEN}Samba安装完成${NC}\n" fi # 显示已挂载的USB设备，排除根目录和系统相关目录 echo -e "${CYAN}已挂载的USB设备:${NC}" mount | grep -E "/dev/sd|/dev/mmcblk" | grep -v " on / " | grep -v " on /boot" | grep -v " on /dev" | grep -v " on /proc" | grep -v " on /sys" | grep -v " on /run" | awk '{print NR". "$1" 挂载在 "$3}' # 如果没有找到设备，提示用户 if [ $? -ne 0 ] || [ -z "$(mount | grep -E "/dev/sd|/dev/mmcblk" | grep -v " on / " | grep -v " on /boot")" ]; then echo -e "${YELLOW}未发现任何已挂载的外部设备${NC}" fi # 提示用户输入挂载点 echo read -e -p "请输入要创建共享的挂载点 (默认为/mnt): " mount_point mount_point=${mount_point:-/mnt} # 检查挂载点是否存在 if [ ! -d "$mount_point" ]; then echo -e "${RED}错误：挂载点 $mount_point 不存在${NC}" read -e -p "是否创建挂载点? (y/n): " create_dir if [[ "$create_dir" == "y" ]]; then sudo mkdir -p "$mount_point" if [ $? -ne 0 ]; then echo -e "${RED}创建挂载点失败${NC}" return 1 fi else echo -e "${RED}操作已取消${NC}" skip_continue_prompt=true return 2 # 特殊返回码，表示用户取消 fi fi # 输入共享文件夹名称 read -e -p "请输入共享文件夹名称 (默认为usb-share): " share_name share_name=${share_name:-usb-share} # 确认共享文件夹的完整路径 share_path="$mount_point/$share_name" echo -e "${CYAN}共享文件夹完整路径: $share_path${NC}" # 创建共享文件夹 sudo mkdir -p "$share_path" sudo chmod -R 777 "$share_path" # 检查smb.conf是否已包含该共享 if grep -q "\[$share_name\]" /etc/samba/smb.conf; then echo -e "${YELLOW}警告：共享 [$share_name] 已存在于配置文件中${NC}" read -e -p "是否更新配置? (y/n): " update_config if [[ "$update_config" != "y" ]]; then echo -e "${RED}操作已取消${NC}" skip_continue_prompt=true return 2 # 特殊返回码，表示用户取消 fi # 删除现有的共享配置 sudo sed -i "/\[$share_name\]/,/^$/d" /etc/samba/smb.conf fi # 添加共享配置到smb.conf echo -e "${YELLOW}添加共享配置到 /etc/samba/smb.conf${NC}" cat </dev/null [$share_name] path = $share_path read only = no guest ok = yes create mask = 0777 directory mask = 0777 browseable = yes EOF # 重启Samba服务 echo -e "${YELLOW}重启Samba服务...${NC}" sudo systemctl restart smbd if [ $? -eq 0 ]; then echo -e "${GREEN}✓ Samba服务重启成功!${NC}" echo -e "${GREEN}✓ USB共享文件夹设置完成!${NC}" echo -e "\n${CYAN}使用方法:${NC}" echo -e "在Windows文件管理器地址栏输入: \\\\\\\\$IP" echo -e "即可访问您的共享文件夹: $share_name\n" else echo -e "${RED}✗ Samba服务重启失败，请检查配置${NC}" fi ;; 2) # 删除共享文件夹 # 检查smb.conf是否存在 if [ ! -f "/etc/samba/smb.conf" ]; then echo -e "${RED}错误：Samba配置文件不存在，请先安装Samba${NC}" return 1 fi # 获取当前所有共享配置 echo -e "${CYAN}当前已配置的共享文件夹:${NC}" shares=$(grep -E "^\[.*\]" /etc/samba/smb.conf | grep -v "\[global\]" | grep -v "\[homes\]" | grep -v "\[printers\]" | tr -d '[]') if [ -z "$shares" ]; then echo -e "${YELLOW}未找到任何共享文件夹配置${NC}" return 1 fi # 显示所有共享 i=1 declare -A share_map echo "已配置的共享文件夹:" while read -r share; do # 获取路径 path=$(grep -A 10 "^\[$share\]" /etc/samba/smb.conf | grep "path" | head -n 1 | awk -F'=' '{print $2}' | tr -d ' ') echo -e " ${CYAN}$i.${NC} $share (路径: $path)" share_map[$i]=$share ((i++)) done <<<"$shares" # 让用户选择要删除的共享 echo read -e -p "请输入要删除的共享编号 (输入q返回): " delete_choice if [[ "$delete_choice" == "q" || "$delete_choice" == "Q" ]]; then echo -e "${YELLOW}操作已取消${NC}" skip_continue_prompt=true return 2 fi # 验证输入 if [[ ! "$delete_choice" =~ ^[0-9]+$ ]] || [ $delete_choice -lt 1 ] || [ $delete_choice -ge $i ]; then echo -e "${RED}错误：无效的选择${NC}" return 1 fi # 获取要删除的共享名称 share_to_delete=${share_map[$delete_choice]} share_path=$(grep -A 10 "^\[$share_to_delete\]" /etc/samba/smb.conf | grep "path" | head -n 1 | awk -F'=' '{print $2}' | tr -d ' ') # 确认删除 echo -e "${YELLOW}您将删除共享 [$share_to_delete] (路径: $share_path)${NC}" read -e -p "是否要同时删除共享文件夹的所有文件? (y/n): " delete_files # 删除配置 echo -e "${YELLOW}正在从配置文件中删除共享...${NC}" sudo sed -i "/\[$share_to_delete\]/,/^$/d" /etc/samba/smb.conf # 删除文件夹内容 if [[ "$delete_files" == "y" || "$delete_files" == "Y" ]]; then if [ -d "$share_path" ]; then echo -e "${YELLOW}正在删除共享文件夹的内容...${NC}" sudo rm -rf "$share_path" echo -e "${GREEN}✓ 文件夹已删除${NC}" else echo -e "${YELLOW}警告：文件夹 $share_path 不存在或无法访问${NC}" fi fi # 重启Samba服务 echo -e "${YELLOW}重启Samba服务...${NC}" sudo systemctl restart smbd if [ $? -eq 0 ]; then echo -e "${GREEN}✓ 共享 [$share_to_delete] 已成功删除!${NC}" else echo -e "${RED}✗ Samba服务重启失败，但配置已更新${NC}" fi ;; q | Q) echo -e "${YELLOW}操作已取消${NC}" skip_continue_prompt=true return 2 ;; *) echo -e "${RED}无效的选择${NC}" skip_continue_prompt=true return 2 ;; esac return 0 } case $choice in 1) search_files echo echo -e "${BLUE}按任意键继续...${NC}" read -n 1 -s -r -p "" ;; 2) sudo systemctl restart network-manager status_output=$(sudo systemctl status network-manager) if sudo systemctl is-active --quiet network-manager; then echo -e "详细信息：\n$status_output" echo -e "${GREEN}网络重启成功${NC}" else echo -e "${RED}网络重启失败${NC}" fi echo echo -e "${BLUE}按任意键继续...${NC}" read -n 1 -s -r -p "" ;; 3) cleanup echo echo -e "${BLUE}按任意键继续...${NC}" read -n 1 -s -r -p "" ;; 4) swap echo echo -e "${BLUE}按任意键继续...${NC}" read -n 1 -s -r -p "" ;; 5) backdrop echo echo -e "${BLUE}按任意键继续...${NC}" read -n 1 -s -r -p "" ;; 6) DNS echo echo -e "${BLUE}按任意键继续...${NC}" read -n 1 -s -r -p "" ;; 7) restore_dns echo echo -e "${BLUE}按任意键继续...${NC}" read -n 1 -s -r -p "" ;; 8) nginx_manager ;; 9) setup_samba_usb_share result=$? # 只有在非取消操作时才显示"按任意键继续..." if [ $result -ne 2 ]; then echo echo -e "${BLUE}按任意键继续...${NC}" read -n 1 -s -r -p "" fi ;; q | Q) break ;; *) echo -e "${RED}无效的选择，请重新输入${NC}" echo echo -e "${BLUE}按任意键继续...${NC}" read -n 1 -s -r -p "" ;; esac done ;; 2) # 安装中文语言包 # 更新软件源 sudo apt-get update # 安装 sudo apt install language-pack-zh-hans language-pack-zh-hans-base # 修改配置文件 echo "LANG=zh_CN.UTF-8" >>~/.profile && echo "export LANG=zh_CN.UTF-8" >>~/.bashrc && echo "export LC_ALL=zh_CN.UTF-8" >>~/.bashrc && echo "export LC_TIME=zh_CN.UTF-8" >>~/.bashrc # 提示重启 read -e -p "语言配置已完成，是否现在重启系统？ (y/n): " choice if [ "$choice" = "y" ]; then sudo reboot else echo -e "${RED}取消重启，请手动重启系统以使语言配置生效${NC}" fi echo "按任意键继续..." read -n 1 -s -r -p "" ;; 3) # 系统健康检查 export LC_ALL="en_US.UTF-8" # ip function check_ip_preference() { local ip_address=$(curl -s test.ipw.cn) if [[ "$ip_address" =~ .*:.* ]]; then echo "${GREEN}IPv6${NC}" elif [[ "$ip_address" =~ ^[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+$ ]]; then echo "${GREEN}IPv4${NC}" else echo "无法确定 IP 地址。" fi } DEVICE=$(dmesg 2>/dev/null | grep "CPU: hi3798" | awk -F ':[ ]' '/CPU/{printf ($2)}') [ ! "$DEVICE" ] && DEVICE=$(head -n 1 /etc/regname 2>/null) mac_now=$(ifconfig eth0 | grep "ether" | awk '{print $2}') clear echo -e "\e[33m _ _ ___ _ _ _ ____ | | | |_ _|| \ | | / \ / ___| | |_| || | | \| | / _ \ \___ \ | _ || | | |\ |/ ___ \ ___) | |_| |_|___||_| \_/_/ \_\____/ 板型名称 : ${DEVICE}_$(egrep -oa "hi3798.+reg" /dev/mmcblk0p1 2>/dev/null | cut -d '_' -f1 | sort | uniq) CPU 信息 : $(cat -v /proc/device-tree/compatible | sed 's/\^@//g')@$(cat /proc/cpuinfo | grep "processor" | sort | uniq | wc -l)核处理器 | $(uname -p)架构 CPU 使用 : $(top -b -n 1 | grep "%Cpu(s):" | awk '{printf "%.2f%%", 100-$8}') 系统版本 : $(awk -F '[= "]' '/PRETTY_NAME/{print $3,$4,$5}' /etc/os-release) | V$(cat /etc/nasversion)-$(uname -r)-$(getconf LONG_BIT) 可用存储 : $(df -m / | grep -v File | awk '{a=$4*100/$2;b=$4} {printf("%.1f%s %.1fM\n",a,"%",b)}') 可用内存 : $(free -m | grep Mem | awk '{a=$7*100/$2;b=$7} {printf("%.1f%s %.1fM\n",a,"%",b)}') | 交换区：$(free -m | grep Swap | awk '{a=$4*100/$2;b=$4} {printf("%.1f%s %.1fM\n",a,"%",b)}') 启动时间 : $(awk '{a=$1/86400;b=($1%86400)/3600;c=($1%3600)/60;d=($1%60)} {printf("%d 天 %d 小时 %d 分钟 %d 秒\n",a,b,c,d)}' /proc/uptime) I P 地址 : $IP IPv4地址 ：$(curl -s ipv4.icanhazip.com) IPv6地址 ：$(curl -s api6.ipify.org) 优先地址 : $(check_ip_preference) 设备温度 : $(grep Tsensor /proc/msp/pm_cpu | awk '{print $4}')°C MAC 地址 : $mac_now 用户状态 : $(whoami) 设备识别码：$(histb | awk '{print $2}') " alias reload='. /etc/profile' alias cls='clear' alias syslog='cat /var/log/syslog' alias unmount='umount -l' alias reg="egrep -oa 'hi3798.+' /dev/mmcblk0p1 | awk '{print $1}'" #Sectioning..... echo -e "${YELLOW}---------------------------------------------------------------------------------------------------------------${NC}" echo "服务状态:" echo -e "${YELLOW}---------------------------------------------------------------------------------------------------------------${NC}" # tomcat echo "1) Tomcat" pp=$(ps aux | grep tomcat | grep "[D]java.util") if [[ $pp =~ "-Xms512M" ]]; then echo -e " Status: ${GREEN}UP${NC}" else echo -e " Status: ${RED}DOWN${NC}" fi echo "" # BusyBox function busybox_httpd() { echo -e "2) BusyBox-httpd" # grepping BusyBox httpd status from ps aux busybox_httpd=$(ps aux | grep "busybox-extras httpd") if [[ "$busybox_httpd" ]]; then echo -e " Status: ${GREEN}UP${NC}" else echo -e " Status: ${RED}DOWN${NC}" fi } function elastic() { echo -e "3) Elasticsearch" elastic=$(ps aux | grep elasticsearch) if [[ $elastic =~ "elastic+" ]]; then echo -e " Status: ${GREEN}UP${NC}" else echo -e " Status: ${RED}DOWN${NC}" fi } # mysql function mysql() { echo -e "4) Mysql" mysql=$(ps aux | grep mysqld) if [[ $mysql =~ "mysqld" ]]; then echo -e " Status: ${GREEN}UP${NC}" else echo -e " Status: ${RED}DOWN${NC}" fi } # docker function docker1() { echo -e "5) Docker" if systemctl is-active --quiet docker; then echo -e " Status: ${GREEN}UP${NC}" else echo -e " Status: ${RED}DOWN${NC}" fi } busybox_httpd echo "" elastic echo "" mysql echo "" docker1 echo "" echo -e "${YELLOW}---------------------------------------------------------------------------------------------------------------${NC}" echo "内存信息:" echo -e "${YELLOW}---------------------------------------------------------------------------------------------------------------${NC}" free -h echo -e "${CYAN}检查时间: $(uptime) ${NC}" echo -e "${CYAN}进程总数: $(ps aux | wc -l) 资源使用率较高的前 10 个服务：${NC}" ps -eo pid,ppid,cmd,%mem,%cpu --sort=-%mem | head echo -e "${YELLOW}---------------------------------------------------------------------------------------------------------------${NC}" echo "服务器空间详情:" echo -e "${YELLOW}---------------------------------------------------------------------------------------------------------------${NC}" df -h -P -T echo -e "${YELLOW}---------------------------------------------------------------------------------------------------------------${NC}" echo -e "${YELLOW}---------------------------------------------------------------------------------------------------------------${NC}" echo "按任意键继续..." read -n 1 -s -r -p "" export LC_ALL=$original_lc_all ;; 4) # Aria2、BT菜单 while true; do clear echo -e "${GREEN}====== 菜单 ======${NC}" echo -e "${YELLOW}1.更改Aria2下载路径${NC}" echo -e "${YELLOW}2.更改BT下载路径${NC}" echo -e "${YELLOW}3.Aria2、BT开启ipv6${NC}" echo -e "${RED}q.返回${NC}" read -e -p "请输入选项: " choice function change_aria2_path() { aria2_conf="/usr/local/aria2/aria2.conf" if [ -f "$aria2_conf" ]; then prompt_and_change_path "$aria2_conf" # 重启 Aria2 systemctl restart aria2c else echo "错误：Aria2配置文件不存在" fi } function prompt_and_change_path() { config_file="$1" current_path=$(grep "^dir=" "$config_file" | awk -F "=" '{print $2}' | tr -d '[:space:]') read -e -p "当前路径为: $current_path，是否要更改？（y/n）" confirm_change if [ "$confirm_change" == "y" ]; then read -e -p "请输入新的相对路径（相对于当前工作目录）： " new_relative_path new_path=$(readlink -f "$new_relative_path") if [ -d "$new_path" ]; then sed -i "s|^dir=.*$|dir=$new_path|" "$config_file" echo -e "${GREEN}路径已更改为: $new_path${NC}" else echo -e "${RED}错误：新路径不存在，请重新操作${NC}" fi else echo -e "${RED}更改操作已取消${NC}" fi } function change_bt_path() { service transmission-daemon stop prompt_and_change_bt_path service transmission-daemon start } function prompt_and_change_bt_path() { config_file="/etc/transmission-daemon/settings.json" current_path=$(grep -E '"download-dir":' "$config_file" | awk -F '"' '{print $4}') read -e -p "当前路径为: $current_path，是否要更改？（y/n）" confirm_change if [ "$confirm_change" == "y" ]; then read -e -p "请输入新的相对路径（相对于当前工作目录）： " new_relative_path new_path=$(readlink -f "$new_relative_path") if [ -d "$new_path" ]; then sed -i 's|"download-dir": ".*"|"download-dir": "'"$new_path"'"|' "$config_file" echo -e "${GREEN}路径已更改为: $new_path${NC}" else echo -e "${RED}错误：新路径不存在，请重新操作${NC}" fi else echo -e "${RED}更改操作已取消${NC}" fi } function aria2_bt_ipv6_path() { # 添加 Transmission 官方 PPA sudo add-apt-repository -y ppa:transmissionbt/ppa # 安装软件-properties-common sudo apt-get update sudo apt-get install -y software-properties-common # 安装 Transmission sudo apt-get install -y transmission # Transmission Web 控制面板中文化脚本 # 获取第一个参数 ARG1="$1" ROOT_FOLDER="" SCRIPT_NAME="$0" SCRIPT_VERSION="1.2.2-beta2" VERSION="" WEB_FOLDER="" ORG_INDEX_FILE="index.original.html" INDEX_FILE="index.html" TMP_FOLDER="/tmp/tr-web-control" PACK_NAME="master.tar.gz" WEB_HOST="https://github.com/ronggang/transmission-web-control/archive/" DOWNLOAD_URL="$WEB_HOST$PACK_NAME" # 安装类型 # 1 安装至当前 Transmission Web 所在目录 # 2 安装至 TRANSMISSION_WEB_HOME 环境变量指定的目录，参考：https://github.com/transmission/transmission/wiki/Environment-Variables#transmission-specific-variables # 使用环境变量时，如果 transmission 不是当前用户运行的，则需要将 TRANSMISSION_WEB_HOME 添加至 /etc/profile 文件，以达到"永久"的目的 # 3 用户指定参数做为目录，如 sh install-tr-control.sh /usr/local/transmission/share/transmission INSTALL_TYPE=-1 SKIP_SEARCH=0 AUTOINSTALL=0 if which whoami 2>/dev/null; then USER=$(whoami) fi #========================================================== MSG_TR_WORK_FOLDER="当前 Transmission Web 目录为: " MSG_SPECIFIED_VERSION="您正在使用指定版本安装，版本：" MSG_SEARCHING_TR_FOLDER="正在搜索 Transmission Web 目录..." MSG_THE_SPECIFIED_DIRECTORY_DOES_NOT_EXIST="指定的目录不存在，准备进行搜索，请稍候..." MSG_USE_WEB_HOME="使用 TRANSMISSION_WEB_HOME 变量: $TRANSMISSION_WEB_HOME" MSG_AVAILABLE="可用" MSG_TRY_SPECIFIED_VERSION="正在尝试指定版本" MSG_PACK_COPYING="正在复制安装包..." MSG_WEB_PATH_IS_MISSING="错误 : Transmisson WEB 目录不存在，请确认是否已安装 Transmisson " MSG_PACK_IS_EXIST=" 已存在，是否重新下载？（y/n）" MSG_SIKP_DOWNLOAD="\n跳过下载，正在准备安装" MSG_DOWNLOADING="正在下载 Transmission Web Control..." MSG_DOWNLOAD_COMPLETE="下载完成，正在准备安装..." MSG_DOWNLOAD_FAILED="安装包下载失败，请重试或尝试其他版本" MSG_INSTALL_COMPLETE="Transmission Web Control 安装完成!" MSG_PACK_EXTRACTING="正在解压安装包..." MSG_PACK_CLEANING_UP="正在清理安装包..." MSG_DONE="安装脚本执行完成，如遇到问题请查看：https://github.com/ronggang/transmission-web-control/wiki " MSG_SETTING_PERMISSIONS="正在设置权限，大约需要一分钟 ..." MSG_BEGIN="开始" MSG_END="结束" MSG_MAIN_MENU=" 欢迎使用 Transmission Web Control 中文安装脚本 官方帮助文档：https://github.com/ronggang/transmission-web-control/wiki 安装脚本版本：$SCRIPT_VERSION 1. 安装最新的发布版本，推荐（release）； 2. 安装指定版本，可用于降级； 3. 恢复到官方UI； 4. 重新下载安装脚本（$SCRIPT_NAME）； 5. 检测 Transmission 是否已启动； 6. 指定安装目录； 9. 安装最新代码库中的内容（master）； =================== 0. 退出安装； 请输入对应的数字：" MSG_INPUT_VERSION="请输入版本号（如：1.5.1）：" MSG_INPUT_TR_FOLDER="请输入 Transmission Web 所在的目录（不包含web，如：/usr/share/transmission）：" MSG_SPECIFIED_FOLDER="安装目录已指定为：" MSG_INVALID_PATH="输入的路径无效" MSG_MASTER_INSTALL_CONFIRM="最新代码可能包含未知错误，是否确认安装？ (y/n): " MSG_FIND_WEB_FOLDER_FROM_PROCESS="正在尝试从进程中识别 Transmission Web 目录..." MSG_FIND_WEB_FOLDER_FROM_PROCESS_FAILED=" × 识别失败，请确认 Transmission 已启动" MSG_CHECK_TR_DAEMON="正在检测 Transmission 进程..." MSG_CHECK_TR_DAEMON_FAILED="在系统进程中没有找到 Transmission ，请确认是否已启动" MSG_TRY_START_TR="是否尝试启动 Transmission ？（y/n）" MSG_TR_DAEMON_IS_STARTED="Transmission 已启动" MSG_REVERTING_ORIGINAL_UI="正在恢复官方UI..." MSG_REVERT_COMPLETE="恢复完成，在浏览器中重新访问 http://ip:9091/ 或刷新即可查看官方UI" MSG_ORIGINAL_UI_IS_MISSING="官方UI不存在" MSG_DOWNLOADING_INSTALL_SCRIPT="正在重新下载安装脚本..." MSG_INSTALL_SCRIPT_DOWNLOAD_COMPLETE="下载完成，请重新运行安装脚本" MSG_INSTALL_SCRIPT_DOWNLOAD_FAILED="安装脚本下载失败！" MSG_NON_ROOT_USER="无法确认当前是否为 root 用户，可能无法进行安装操作，是否继续？（y/n）" #========================================================== # 是否自动安装 if [ "$ARG1" = "auto" ]; then AUTOINSTALL=1 else ROOT_FOLDER=$ARG1 fi initValues() { # 判断临时目录是否存在，不存在则创建 if [ ! -d "$TMP_FOLDER" ]; then mkdir -p "$TMP_FOLDER" fi # 获取 Transmission 目录 getTransmissionPath # 判断 ROOT_FOLDER 是否为一个有效的目录，如果是则表明传递了一个有效路径 if [ -d "$ROOT_FOLDER" ]; then showLog "$MSG_TR_WORK_FOLDER $ROOT_FOLDER/web" INSTALL_TYPE=3 WEB_FOLDER="$ROOT_FOLDER/web" SKIP_SEARCH=1 fi # 判断是否指定了版本 if [ "$VERSION" != "" ]; then # master 或 hash if [ "$VERSION" = "master" -o ${#VERSION} = 40 ]; then PACK_NAME="$VERSION.tar.gz" # 是否指定了 v elif [ ${VERSION:0:1} = "v" ]; then PACK_NAME="$VERSION.tar.gz" VERSION=${VERSION:1} else PACK_NAME="v$VERSION.tar.gz" fi showLog "$MSG_SPECIFIED_VERSION $VERSION" DOWNLOAD_URL="https://github.com/ronggang/transmission-web-control/archive/$PACK_NAME" fi if [ $SKIP_SEARCH = 0 ]; then # 查找目录 findWebFolder fi } # 开始 main() { begin # 初始化值 initValues # 安装 install # 清理 clear } # 查找Web目录 findWebFolder() { # 找出web ui 目录 showLog "$MSG_SEARCHING_TR_FOLDER" # 判断 TRANSMISSION_WEB_HOME 环境变量是否被定义，如果是，直接用这个变量的值 if [ $TRANSMISSION_WEB_HOME ]; then showLog "$MSG_USE_WEB_HOME" # 判断目录是否存在，如果不存在则创建 https://github.com/ronggang/transmission-web-control/issues/167 if [ ! -d "$TRANSMISSION_WEB_HOME" ]; then mkdir -p "$TRANSMISSION_WEB_HOME" fi INSTALL_TYPE=2 else if [ -d "$ROOT_FOLDER" -a -d "$ROOT_FOLDER/web" ]; then WEB_FOLDER="$ROOT_FOLDER/web" INSTALL_TYPE=1 showLog "$ROOT_FOLDER/web $MSG_AVAILABLE." else showLog "$MSG_THE_SPECIFIED_DIRECTORY_DOES_NOT_EXIST" ROOT_FOLDER=$(find / -name 'web' -type d 2>/dev/null | grep 'transmission/web' | sed 's/\/web$//g') if [ -d "$ROOT_FOLDER/web" ]; then WEB_FOLDER="$ROOT_FOLDER/web" INSTALL_TYPE=1 fi fi fi } # 安装 install() { # 是否指定版本 if [ "$VERSION" != "" ]; then showLog "$MSG_TRY_SPECIFIED_VERSION $VERSION" # 下载安装包 download # 解压安装包 unpack showLog "$MSG_PACK_COPYING" # 复制文件到 cp -r "$TMP_FOLDER/transmission-web-control-$VERSION/src/." "$WEB_FOLDER/" # 设置权限 setPermissions "$WEB_FOLDER" # 安装完成 installed # 如果目录存在，则进行下载和更新动作 elif [ $INSTALL_TYPE = 1 -o $INSTALL_TYPE = 3 ]; then # 下载安装包 download # 创建web文件夹，从 20171014 之后，打包文件不包含web目录，直接打包为src下所有文件 mkdir web # 解压缩包 unpack "web" showLog "$MSG_PACK_COPYING" # 复制文件到 cp -r web "$ROOT_FOLDER" # 设置权限 setPermissions "$ROOT_FOLDER" # 安装完成 installed elif [ $INSTALL_TYPE = 2 ]; then # 下载安装包 download # 解压缩包 unpack "$TRANSMISSION_WEB_HOME" # 设置权限 setPermissions "$TRANSMISSION_WEB_HOME" # 安装完成 installed else echo "##############################################" echo "#" echo "# $MSG_WEB_PATH_IS_MISSING" echo "#" echo "##############################################" fi } # 下载安装包 download() { # 切换到临时目录 cd "$TMP_FOLDER" # 判断安装包文件是否已存在 if [ -f "$PACK_NAME" ]; then if [ $AUTOINSTALL = 0 ]; then echo -n "\n$PACK_NAME $MSG_PACK_IS_EXIST" read flag else flag="y" fi if [ "$flag" = "y" -o "$flag" = "Y" ]; then rm "$PACK_NAME" else showLog "$MSG_SIKP_DOWNLOAD" return 0 fi fi showLog "$MSG_DOWNLOADING" echo "" wget "$DOWNLOAD_URL" --no-check-certificate # 判断是否下载成功 if [ $? -eq 0 ]; then showLog "$MSG_DOWNLOAD_COMPLETE" return 0 else showLog "$MSG_DOWNLOAD_FAILED" end exit 1 fi } # 安装完成 installed() { showLog "$MSG_INSTALL_COMPLETE" } # 输出日志 showLog() { TIME=$(date "+%Y-%m-%d %H:%M:%S") case $2 in "n") echo -n "<< $TIME >> $1" ;; *) echo "<< $TIME >> $1" ;; esac } # 解压安装包 unpack() { showLog "$MSG_PACK_EXTRACTING" if [ "$1" != "" ]; then tar -xzf "$PACK_NAME" -C "$1" else tar -xzf "$PACK_NAME" fi # 如果之前没有安装过，则先将原系统的文件改为 if [ ! -f "$WEB_FOLDER/$ORG_INDEX_FILE" -a -f "$WEB_FOLDER/$INDEX_FILE" ]; then mv "$WEB_FOLDER/$INDEX_FILE" "$WEB_FOLDER/$ORG_INDEX_FILE" fi # 清除原来的内容 if [ -d "$WEB_FOLDER/tr-web-control" ]; then rm -rf "$WEB_FOLDER/tr-web-control" fi } # 清除工作 clear() { showLog "$MSG_PACK_CLEANING_UP" if [ -f "$PACK_NAME" ]; then # 删除安装包 rm "$PACK_NAME" fi if [ -d "$TMP_FOLDER" ]; then # 删除临时目录 rm -rf "$TMP_FOLDER" fi showLog "$MSG_DONE" end } # 设置权限 setPermissions() { folder="$1" showLog "$MSG_SETTING_PERMISSIONS" # 设置权限 find "$folder" -type d -exec chmod o+rx {} \; find "$folder" -type f -exec chmod o+r {} \; } # 开始 begin() { echo "" showLog "== $MSG_BEGIN ==" showLog "" } # 结束 end() { showLog "== $MSG_END ==" echo "" } # 显示主菜单 showMainMenu() { echo -n "$MSG_MAIN_MENU" read flag echo "" case $flag in 1) getLatestReleases main ;; 2) echo -n "$MSG_INPUT_VERSION" read VERSION main ;; 3) revertOriginalUI ;; 4) downloadInstallScript ;; 5) checkTransmissionDaemon ;; 6) echo -n "$MSG_INPUT_TR_FOLDER" read input if [ -d "$input/web" ]; then ROOT_FOLDER="$input" showLog "$MSG_SPECIFIED_FOLDER $input/web" else showLog "$MSG_INVALID_PATH" fi sleep 2 showMainMenu ;; # 下载最新的代码 9) echo -n "$MSG_MASTER_INSTALL_CONFIRM" read input if [ "$input" = "y" -o "$input" = "Y" ]; then VERSION="master" main else showMainMenu fi ;; *) showLog "$MSG_END" ;; esac } # 获取Tr所在的目录 getTransmissionPath() { # 指定一次当前系统的默认目录 # 用户如知道自己的 Transmission Web 所在的目录，直接修改这个值，以避免搜索所有目录 # ROOT_FOLDER="/usr/local/transmission/share/transmission" # Fedora 或 Debian 发行版的默认 ROOT_FOLDER 目录 if [ -f "/etc/fedora-release" ] || [ -f "/etc/debian_version" ]; then ROOT_FOLDER="/usr/share/transmission" fi if [ ! -d "$ROOT_FOLDER" ]; then showLog "$MSG_FIND_WEB_FOLDER_FROM_PROCESS" "n" infos=$(ps -ef | awk '/[t]ransmission-da/{print $8}') if [ "$infos" != "" ]; then echo " √" search="bin/transmission-daemon" replace="share/transmission" path=${infos//$search/$replace} if [ -d "$path" ]; then ROOT_FOLDER=$path fi else echo "$MSG_FIND_WEB_FOLDER_FROM_PROCESS_FAILED" fi fi } # 获取最后的发布版本号 # 因在源码库里提交二进制文件不便于管理，以后将使用这种方式获取最新发布的版本 getLatestReleases() { VERSION=$(wget -O - https://api.github.com/repos/ronggang/transmission-web-control/releases/latest | grep tag_name | head -n 1 | cut -d '"' -f 4) } # 检测 Transmission 进程是否存在 checkTransmissionDaemon() { showLog "$MSG_CHECK_TR_DAEMON" ps -C transmission-daemon if [ $? -ne 0 ]; then showLog "$MSG_CHECK_TR_DAEMON_FAILED" echo -n "$MSG_TRY_START_TR" read input if [ "$input" = "y" -o "$input" = "Y" ]; then service transmission-daemon start fi else showLog "$MSG_TR_DAEMON_IS_STARTED" fi sleep 2 showMainMenu } # 恢复官方UI revertOriginalUI() { initValues # 判断是否有官方的UI存在 if [ -f "$WEB_FOLDER/$ORG_INDEX_FILE" ]; then showLog "$MSG_REVERTING_ORIGINAL_UI" # 清除原来的内容 if [ -d "$WEB_FOLDER/tr-web-control" ]; then rm -rf "$WEB_FOLDER/tr-web-control" rm "$WEB_FOLDER/favicon.ico" rm "$WEB_FOLDER/index.html" rm "$WEB_FOLDER/index.mobile.html" mv "$WEB_FOLDER/$ORG_INDEX_FILE" "$WEB_FOLDER/$INDEX_FILE" showLog "$MSG_REVERT_COMPLETE" else showLog "$MSG_WEB_PATH_IS_MISSING" sleep 2 showMainMenu fi else showLog "$MSG_ORIGINAL_UI_IS_MISSING" sleep 2 showMainMenu fi } # 重新下载安装脚本 downloadInstallScript() { if [ -f "$SCRIPT_NAME" ]; then rm "$SCRIPT_NAME" fi showLog "$MSG_DOWNLOADING_INSTALL_SCRIPT" wget "https://github.com/ronggang/transmission-web-control/raw/master/release/$SCRIPT_NAME" --no-check-certificate # 判断是否下载成功 if [ $? -eq 0 ]; then showLog "$MSG_INSTALL_SCRIPT_DOWNLOAD_COMPLETE" else showLog "$MSG_INSTALL_SCRIPT_DOWNLOAD_FAILED" sleep 2 showMainMenu fi } if [ "$USER" != 'root' ]; then showLog "$MSG_NON_ROOT_USER" "n" read input if [ "$input" = "n" -o "$input" = "N" ]; then exit -1 fi fi if [ $AUTOINSTALL = 1 ]; then getLatestReleases main else # 执行 showMainMenu fi # Aria2 配置更新 conf_file="/usr/local/aria2/aria2.conf" if [ ! -f "$conf_file" ]; then echo "错误：$conf_file 文件不存在." exit 1 fi sudo sed -i 's/disable-ipv6=true/disable-ipv6=false/' "$conf_file" sudo sed -i 's/enable-dht6=false/enable-dht6=true/' "$conf_file" echo "aria2 已开启ipv6." systemctl restart aria2c # Transmission Daemon 配置更新 sudo service transmission-daemon stop sudo sed -i 's/"rpc-bind-address": "0.0.0.0"/"rpc-bind-address": "::"/' /etc/transmission-daemon/settings.json if [ $? -ne 0 ]; then echo "错误：Transmission-daemon 配置更新失败." exit 1 fi sudo service transmission-daemon start if [ $? -ne 0 ]; then echo "错误：无法启动 Transmission-daemon 服务." exit 1 fi echo "Transmission 已开启ipv6." echo "配置更新成功！" } case $choice in 1) change_aria2_path ;; 2) change_bt_path ;; 3) aria2_bt_ipv6_path ;; q | Q) break ;; *) echo "无效的选择，请重新输入" ;; esac echo "按任意键继续..." read -n 1 -s -r -p "" done ;; 5) # 网络测速菜单 while true; do clear print_menu_header "网络测速工具" print_menu_option "1" "Speedtest测速 (标准模式)" print_menu_option "2" "Speedtest测速 (简洁模式)" print_menu_option "3" "Ping测试" print_menu_option "4" "查看网络接口状态" print_menu_option "5" "安装/更新 Speedtest CLI" print_menu_option "q" "返回" $RED echo read -e -p "请输入选项: " speedtest_choice # 确保Speedtest CLI已安装 function ensure_speedtest_installed() { if ! command -v speedtest &>/dev/null; then echo -e "${YELLOW}Speedtest CLI未安装，正在安装...${NC}" # 备份原始源列表 if [ -f /etc/apt/sources.list.d/speedtest.list ]; then sudo cp /etc/apt/sources.list.d/speedtest.list /etc/apt/sources.list.d/speedtest.list.bak fi # 安装Speedtest CLI if curl -s https://packagecloud.io/install/repositories/ookla/speedtest-cli/script.deb.sh | sudo bash; then echo -e "${CYAN}软件源添加成功，正在安装...${NC}" if sudo apt-get install -y speedtest; then echo -e "${GREEN}✓ Speedtest CLI 安装成功!${NC}" return 0 else echo -e "${RED}✗ Speedtest CLI 安装失败${NC}" return 1 fi else echo -e "${RED}✗ 添加软件源失败${NC}" return 1 fi else return 0 # 已安装 fi } # 标准模式测速 function run_standard_speedtest() { echo -e "${YELLOW}正在进行完整网络测速，请稍候...${NC}" echo -e "${CYAN}这将测试您的下载、上传速度和网络延迟${NC}\n" if ensure_speedtest_installed; then # 执行测速并捕获输出 echo -e "${CYAN}测试开始 - $(date '+%Y-%m-%d %H:%M:%S')${NC}\n" # 等待动画函数 speedtest_pid="" function show_spinner() { local spin='⣾⣽⣻⢿⡿⣟⣯⣷' local charwidth=3 local i=0 while kill -0 $speedtest_pid 2>/dev/null; do i=$(((i + 1) % ${#spin})) printf "${CYAN}%s${NC}" "${spin:$i:$charwidth}" printf "\r" sleep 0.2 done printf " \r" # 清除spinner } # 在后台运行speedtest，并在前台显示旋转动画 speedtest --accept-license --accept-gdpr >speedtest_result.txt 2>&1 & speedtest_pid=$! show_spinner # 检查测试结果 if [ -f "speedtest_result.txt" ]; then cat speedtest_result.txt rm speedtest_result.txt echo -e "\n${GREEN}✓ 测速完成!${NC}" else echo -e "${RED}✗ 测速失败${NC}" fi fi } # 简洁模式测速 function run_simple_speedtest() { echo -e "${YELLOW}正在进行简洁网络测速，请稍候...${NC}" if ensure_speedtest_installed; then echo -e "${CYAN}测试开始 - $(date '+%Y-%m-%d %H:%M:%S')${NC}" # 执行测速并实时显示进度 local result=$(speedtest --accept-license --accept-gdpr --format=json 2>/dev/null) if [ $? -eq 0 ]; then # 确保所需工具已安装 local tools_missing=false # 检查jq if ! command -v jq &>/dev/null; then echo -e "${YELLOW}正在安装JSON解析工具(jq)...${NC}" sudo apt install -y jq || tools_missing=true fi # 检查bc if ! command -v bc &>/dev/null; then echo -e "${YELLOW}正在安装计算工具(bc)...${NC}" sudo apt install -y bc || tools_missing=true fi if [ "$tools_missing" = true ]; then echo -e "${RED}✗ 部分工具安装失败，结果可能不完整${NC}" fi if command -v jq &>/dev/null; then local ping=$(echo $result | jq -r '.ping.latency') local download=$(echo $result | jq -r '.download.bandwidth') local upload=$(echo $result | jq -r '.upload.bandwidth') local isp=$(echo $result | jq -r '.isp') local server=$(echo $result | jq -r '.server.name') local server_loc=$(echo $result | jq -r '.server.location') # 转换带宽单位 (bytes/s to Mbps) if command -v bc &>/dev/null; then download=$(echo "scale=2; $download * 8 / 1000000" | bc) upload=$(echo "scale=2; $upload * 8 / 1000000" | bc) else # 如果bc不可用，使用awk作为替代方案 download=$(awk "BEGIN {printf \"%.2f\", $download * 8 / 1000000}") upload=$(awk "BEGIN {printf \"%.2f\", $upload * 8 / 1000000}") fi echo -e "\n${GREEN}=== 测速结果 ===${NC}" echo -e "${CYAN}ISP:${NC} $isp" echo -e "${CYAN}服务器:${NC} $server ($server_loc)" echo -e "${CYAN}Ping延迟:${NC} ${GREEN}${ping} ms${NC}" echo -e "${CYAN}下载速度:${NC} ${GREEN}${download} Mbps${NC}" echo -e "${CYAN}上传速度:${NC} ${GREEN}${upload} Mbps${NC}" else echo -e "${RED}✗ 无法安装jq解析工具${NC}" echo "$result" # 直接显示JSON fi echo -e "\n${GREEN}✓ 测速完成!${NC}" else echo -e "${RED}✗ 测速失败${NC}" fi fi } # Ping测试 function run_ping_test() { clear echo -e "${YELLOW}Ping测试工具${NC}" echo -e "${CYAN}此工具将测试您的网络连接延迟${NC}\n" # 预设的目标服务器 local targets=( "www.baidu.com:百度" "www.qq.com:腾讯" "www.aliyun.com:阿里云" "1.1.1.1:Cloudflare DNS" "8.8.8.8:Google DNS" ) echo -e "${GREEN}=== 预设目标 ===${NC}" for i in "${!targets[@]}"; do local index=$((i + 1)) local target=(${targets[$i]/:/ }) echo -e " ${BOLD}${YELLOW}[$index]${NC} ${target[1]} (${target[0]})" done echo -e " ${BOLD}${YELLOW}[c]${NC} 自定义目标" echo -e " ${BOLD}${RED}[q]${NC} 返回" echo read -e -p "请选择目标: " target_choice local host="" local name="" case "$target_choice" in [1-9]) local index=$((target_choice - 1)) if [ $index -lt ${#targets[@]} ]; then local target=(${targets[$index]/:/ }) host=${target[0]} name=${target[1]} else echo -e "${RED}无效的选择${NC}" sleep 1 return fi ;; c | C) read -e -p "请输入要Ping的主机名或IP: " custom_host host=$custom_host name="自定义目标" ;; q | Q) return ;; *) echo -e "${RED}无效的选择${NC}" sleep 1 return ;; esac if [ -n "$host" ]; then echo -e "\n${YELLOW}正在Ping ${name} (${host})...${NC}" ping -c 10 $host echo -e "\n${GREEN}✓ Ping测试完成!${NC}" fi } # 显示网络接口状态 function show_network_interfaces() { clear echo -e "${YELLOW}网络接口状态${NC}" echo -e "${CYAN}显示所有活动网络接口的详细信息${NC}\n" echo -e "${GREEN}=== 网络接口列表 ===${NC}" ip -br addr echo -e "\n${GREEN}=== 详细网络信息 ===${NC}" ifconfig echo -e "\n${GREEN}=== 路由表 ===${NC}" ip route echo -e "\n${GREEN}=== DNS配置 ===${NC}" if [ -f "/etc/resolv.conf" ]; then cat /etc/resolv.conf else echo -e "${RED}未找到DNS配置文件${NC}" fi } # 安装/更新Speedtest CLI function install_update_speedtest() { echo -e "${YELLOW}正在安装/更新 Speedtest CLI...${NC}" # 移除旧版本 if command -v speedtest &>/dev/null; then echo -e "${CYAN}移除旧版本...${NC}" sudo apt-get remove -y speedtest fi # 重新安装 ensure_speedtest_installed } # 处理用户选择 case "$speedtest_choice" in 1) run_standard_speedtest ;; 2) run_simple_speedtest ;; 3) run_ping_test ;; 4) show_network_interfaces ;; 5) install_update_speedtest ;; q | Q) break ;; *) echo -e "${RED}无效的选择${NC}" ;; esac echo echo -e "${BLUE}按任意键继续...${NC}" read -n 1 -s -r -p "" done ;; 6) # 调用格式化脚本 format-disk.sh echo -e "${GREEN}格式化完成${NC}" echo "按任意键继续..." read -n 1 -s -r -p "" ;; 7) # Docker菜单 while true; do clear echo -e "${GREEN}====== Docker管理脚本 ====== ${NC}" echo -e "${YELLOW}1. 显示所有容器${NC}" echo -e "${YELLOW}2. 显示所有镜像${NC}" echo -e "${YELLOW}3. 启动容器${NC}" echo -e "${YELLOW}4. 停止容器${NC}" echo -e "${YELLOW}5. 重启容器${NC}" echo -e "${YELLOW}6. 删除容器${NC}" echo -e "${YELLOW}7. 删除镜像${NC}" echo -e "${YELLOW}8. 安装docker${NC}" echo -e "${YELLOW}9. 卸载docker${NC}" echo -e "${YELLOW}10.安装Portainer${NC}" echo -e "${YELLOW}11.安装青龙面板${NC}" echo -e "${YELLOW}12.安装DDNSGO${NC}" echo -e "${YELLOW}14.安装Lucky${NC}" echo -e "${YELLOW}15.安装Uptime Kuma${NC}" echo -e "${RED}q. 返回${NC}" read -e -p "请输入选项: " choice function check_docker_installed() { if ! command -v docker &>/dev/null; then echo -e "${RED}请先安装Docker${NC}" return 1 fi } function install_docker() { # 调用安装 Docker 的脚本 install-docker.sh } function uninstall_docker() { # 卸载docker check_docker_installed || return 1 sudo apt-get purge docker-ce docker-ce-cli containerd.io sudo rm -rf /var/lib/docker sudo rm /usr/local/bin/docker-compose echo -e "${GREEN}Docker卸载完成${NC}" } function install_portainer() { check_docker_installed || return 1 # 调用安装 Portainer 的脚本 install-portainer.sh } function install_qinglong() { check_docker_installed || return 1 # 调用安装青龙面板的脚本 install-qinglong.sh } function install_ddnsgo() { check_docker_installed || return 1 # 安装ddnsgo docker run -d --name ddns-go --restart=always --net=host -v /opt/ddns-go:/root jeessy/ddns-go # 图标 curl -o /var/www/html/img/png/ddnsgo.png https://raw.githubusercontent.com/LX-webo/hinas/main/ddnsgo.png cat </var/www/html/icons_wan/ddnsgo.html
  • DDNSGO
    • EOF echo -e "${GREEN}安装完成，web地址: $IP:9876${NC}" } function show_running_containers() { check_docker_installed || return 1 echo -e "${GREEN}================================================ 所有容器 ================================================${NC}" # 获取容器的信息 docker ps -a --format "table {{.ID}}\t{{.Names}}\t{{.CreatedAt}}\t{{.Status}}" echo -e "${GREEN}=========================================================================================================${NC}" } function show_images() { check_docker_installed || return 1 echo -e "${GREEN}================================================ 所有镜像 ================================================${NC}" # 获取镜像的信息 docker images echo -e "${GREEN}=========================================================================================================${NC}" } function start_container() { check_docker_installed || return 1 read -e -p "请输入容器名称: " container_name docker start $container_name if [ $? -eq 0 ]; then echo "容器 $container_name 已成功启动." else echo "启动容器 $container_name 失败." fi } function stop_container() { check_docker_installed || return 1 read -e -p "请输入容器名称: " container_name docker stop $container_name if [ $? -eq 0 ]; then echo "容器 $container_name 已成功停止." else echo "停止容器 $container_name 失败." fi } function restart_container() { check_docker_installed || return 1 read -e -p "请输入容器名称: " container_name docker restart $container_name if [ $? -eq 0 ]; then echo "容器 $container_name 已成功重启." else echo "重启容器 $container_name 失败." fi } function remove_container() { check_docker_installed || return 1 read -e -p "请输入容器名称: " container_name docker rm $container_name if [ $? -eq 0 ]; then echo "容器 $container_name 已成功删除." else echo "删除容器 $container_name 失败." fi } function remove_image() { check_docker_installed || return 1 read -e -p "请输入镜像名称: " image_name docker rmi $image_name if [ $? -eq 0 ]; then echo "镜像 $image_name 已成功删除." else echo "删除镜像 $image_name 失败." fi } function Lucky() { check_docker_installed || return 1 docker run -d --name lucky --restart=always --net=host gdy666/lucky # 图标 curl -o /var/www/html/img/png/lucky.png https://raw.githubusercontent.com/LX-webo/hinas/main/lucky.png cat </var/www/html/icons_wan/lucky.html
  • Lucky
    • EOF echo -e "${GREEN}安装完成，web地址: $IP:16601${NC}" } function UptimeKuma() { check_docker_installed || return 1 docker run -d --restart=always -p 3001:3001 -v uptime-kuma:/app/data --name uptime-kuma louislam/uptime-kuma:1 # 图标 curl -o /var/www/html/img/png/UptimeKuma.png https://raw.githubusercontent.com/LX-webo/hinas/main/UptimeKuma.png cat </var/www/html/icons_lan/UptimeKuma.html
  • UptimeKuma
    • EOF echo -e "${GREEN}安装完成，web地址: $IP:3001${NC}" } case $choice in 1) show_running_containers ;; 2) show_images ;; 3) start_container ;; 4) stop_container ;; 5) restart_container ;; 6) remove_container ;; 7) remove_image ;; 8) install_docker ;; 9) uninstall_docker ;; 10) install_portainer ;; 11) install_qinglong ;; 12) install_ddnsgo ;; 14) Lucky ;; 15) UptimeKuma ;; q | Q) break ;; *) echo -e "${RED}无效的选项${NC}" ;; esac echo "按任意键继续..." read -n 1 -s -r -p "" done ;; 8) # 安装 Cockpit sudo apt install cockpit # 图标 curl -o /var/www/html/img/png/cockpit.png https://raw.githubusercontent.com/LX-webo/hinas/main/cockpit.png cat </var/www/html/icons_lan/cockpit.html
  • Cockpit
    • EOF echo -e "${GREEN}安装完成，web地址: $IP:9090${NC}" echo "按任意键继续..." read -n 1 -s -r -p "" ;; 9) # 系统迁移菜单 while true; do clear echo -e "${GREEN}选择一个操作：${NC}" echo -e "${YELLOW}1.制作U盘、TF启动系统，建议先备份EMMC启动文件${NC}" echo -e "${YELLOW}2.备份EMMC、TF、USB 存储启动系统文件${NC}" echo -e "${YELLOW}3.恢复EMMC、TF、USB 存储启动系统文件${NC}" echo -e "${RED}q.返回${NC}" read -e -p "请输入选项: " menu_choice case "$menu_choice" in 1) # 创建目录 echo -e "${RED}系统创建中，请耐心等待...${NC}" sudo mkdir /mnt/mm8 && sudo mount /dev/mmcblk0p8 /mnt/mm8 platformbit=$(getconf LONG_BIT) if [ "${platformbit}" == '64' ]; then cp /mnt/mm8/backup-64.gz /home/ubuntu gunzip /home/ubuntu/backup-64.gz backup_file=/home/ubuntu/backup-64 else cp /mnt/mm8/backup-32.gz /home/ubuntu gunzip /home/ubuntu/backup-32.gz backup_file=/home/ubuntu/backup-32 fi umount /mnt/mm8 && rm -rf /mnt/mm8 # 写入TF卡或USB驱动器 echo "选择新的系统位置：" echo -e "${GREEN}1.TF卡${NC}" echo -e "${GREEN}2.USB驱动器${NC}" read -e -p "请输入选项: " device_choice case "$device_choice" in 1) target_partition="/dev/mmcblk1p1" mount_point="/mnt/mmcblk1p1" new_content="root=/dev/mmcblk1p1" ;; 2) target_partition="/dev/sda1" mount_point="/mnt/sda1" new_content="root=/dev/sda1" ;; *) echo -e "${RED}无效的选择${NC}" break ;; esac # dd 写入选定设备 echo "正在写入设备... ($target_partition)" dd if="$backup_file" of="$target_partition" bs=4M status=progress rm -f "$backup_file" # 检查调整分区 echo -e "${YELLOW}自动调整分区 (${target_partition})${NC}" umount "$target_partition" e2fsck -f "$target_partition" resize2fs "$target_partition" mount "$target_partition" "$mount_point" # 制作bootargs.bin file_path="/etc/bootargs_input.txt" original_content=$(cat $file_path) # 替换root参数 sed -i "s|root=/dev/[a-zA-Z0-9_]*|${new_content}|" $file_path # 生成bootargs.bin mkbootargs -s 64 -r /etc/bootargs_input.txt -o bootargs.bin >/dev/null # 还原root参数 sed -i "s|root=/dev/[a-zA-Z0-9_]*|root=/dev/mmcblk0p9|" $file_path # 命令刷入 echo -e "\n${YELLOW}正在写入启动文件...${NC}" dd if=bootargs.bin of=/dev/mmcblk0p2 bs=1024 count=1024 rm -f bootargs.bin read -e -p "切换系统完成，请重启设备 (y/n): " confirm_reboot if [ "$confirm_reboot" = "y" ]; then echo -e "${GREEN}重启设备...${NC}" reboot else echo -e "${RED}取消重启设备，请稍后手动重启设备以使更改生效${NC}" echo "按任意键继续..." read -n 1 -s -r -p "" break fi ;; 2) # 备份EMMC、TF、USB菜单 clear echo -e "${GREEN}备份EMMC、TF、USB 存储启动系统文件${NC}" echo -e "${YELLOW}1.备份EMMC启动: ${NC}" echo -e "${YELLOW}2.备份TF启动: ${NC}" echo -e "${YELLOW}3.备份USB启动: ${NC}" echo -e "${RED}q.返回${NC}" read -e -p "请输入选项: " backup_type case "$backup_type" in 1) # 备份EMMC echo -e "${GREEN}备份EMMC启动${NC}" read -e -p "是否确认备份EMMC启动？ (y/n): " confirm_emmc_backup if [ "$confirm_emmc_backup" = "y" ]; then dd if=/dev/mmcblk0p2 of=/mnt/sda1/hi3798mv100_bootargs_emmc_backup.img echo -e "${GREEN}EMMC启动备份完成${NC}" else echo -e "${RED}取消EMMC启动备份${NC}" fi ;; 2) # 备份TF echo -e "${GREEN}备份TF启动${NC}" read -e -p "是否确认备份TF启动？ (y/n): " confirm_tf_backup if [ "$confirm_tf_backup" = "y" ]; then dd if=/dev/mmcblk0p2 of=/mnt/sda1/hi3798mv100_bootargs_tf_backup.img echo -e "${GREEN}TF启动备份完成${NC}" else echo -e "${RED}取消TF启动备份${NC}" fi ;; 3) # 备份USB echo -e "${GREEN}备份USB启动${NC}" read -e -p "是否确认备份USB启动？ (y/n): " confirm_usb_backup if [ "$confirm_usb_backup" = "y" ]; then dd if=/dev/mmcblk0p2 of=/mnt/sda1/hi3798mv100_bootargs_usb_backup.img echo -e "${GREEN}USB启动备份完成${NC}" else echo -e "${RED}取消USB启动备份${NC}" fi ;; q | Q) continue ;; *) echo -e "${RED}无效的选择${NC}" ;; esac ;; 3) # 恢复EMMC、TF、USB菜单 clear echo -e "${GREEN}恢复EMMC、TF、USB 存储启动系统文件${NC}" echo -e "${YELLOW}1.恢复EMMC启动${NC}" echo -e "${YELLOW}2.恢复TF启动${NC}" echo -e "${YELLOW}3.恢复USB启动${NC}" echo -e "${RED}q.返回${NC}" read -e -p "请输入选项: " restore_type case "$restore_type" in 1) # 恢复EMMC echo -e "${GREEN}恢复EMMC启动${NC}" read -e -p "是否确认恢复EMMC启动？ (y/n): " confirm_emmc_restore if [ "$confirm_emmc_restore" = "y" ]; then if [ -f "/mnt/sda1/hi3798mv100_bootargs_emmc_backup.img" ]; then dd if=/mnt/sda1/hi3798mv100_bootargs_emmc_backup.img of=/dev/mmcblk0p2 read -e -p "EMMC启动恢复完成，是否重启设备 (y/n): " confirm_reboot if [ "$confirm_reboot" = "y" ]; then echo -e "${GREEN}重启设备...${NC}" reboot else echo -e "${RED}取消重启设备，请稍后手动重启设备以使更改生效${NC}" fi else echo -e "${RED}备份文件 hi3798mv100_bootargs_emmc_backup.img 不存在，无法执行EMMC启动恢复${NC}" fi else echo -e "${RED}取消EMMC启动恢复${NC}" fi ;; 2) # 恢复TF echo -e "${GREEN}恢复TF启动${NC}" read -e -p "是否确认恢复TF启动？ (y/n): " confirm_tf_restore if [ "$confirm_tf_restore" = "y" ]; then if [ -f "/mnt/sda1/hi3798mv100_bootargs_tf_backup.img" ]; then dd if=/mnt/sda1/hi3798mv100_bootargs_tf_backup.img of=/dev/mmcblk0p2 read -e -p "TF启动恢复完成，是否重启设备 (y/n): " confirm_reboot if [ "$confirm_reboot" = "y" ]; then echo -e "${GREEN}重启设备...${NC}" reboot else echo -e "${RED}取消重启设备，请稍后手动重启设备以使更改生效${NC}" fi else echo -e "${RED}备份文件 hi3798mv100_bootargs_tf_backup.img 不存在，无法执行tf启动恢复${NC}" fi else echo -e "${RED}取消tf启动恢复${NC}" fi ;; 3) # 恢复USB echo -e "${GREEN}恢复USB启动${NC}" read -e -p "是否确认恢复USB启动？ (y/n): " confirm_usb_restore if [ "$confirm_usb_restore" = "y" ]; then if [ -f "/mnt/sda1/hi3798mv100_bootargs_usb_backup.img" ]; then dd if=/mnt/sda1/hi3798mv100_bootargs_usb_backup.img of=/dev/mmcblk0p2 read -e -p "USB启动恢复完成，是否重启设备 (y/n): " confirm_reboot if [ "$confirm_reboot" = "y" ]; then echo -e "${GREEN}重启设备...${NC}" reboot else echo -e "${RED}取消重启设备，请稍后手动重启设备以使更改生效${NC}" fi else echo -e "${RED}备份文件 hi3798mv100_bootargs_usb_backup.img 不存在，无法执行usb启动恢复${NC}" fi else echo -e "${RED}取消usb启动恢复${NC}" fi ;; q | Q) continue ;; *) echo -e "${RED}无效的选择${NC}" ;; esac ;; q | Q) break ;; *) # 无效选项 echo -e "${RED}无效的选择${NC}" ;; esac echo "按任意键继续..." read -n 1 -s -r -p "" done ;; 10) # 安装tailscale穿透 #停止固件自带的tailscale systemctl stop tailscaled #关闭固件自带的tailscale的开机自启 systemctl disable tailscaled #删除执行文件和服务文件 rm -rf /usr/bin/tailscaled rm -rf /etc/systemd/system/tailscaled.service #执行官方的安装脚本 curl -fsSL https://tailscale.com/install.sh | sh #启动软件并设为自启 systemctl start tailscaled systemctl enable tailscaled #启动软件，并在链接中登录 tailscale up echo "安装完成，请打开链接登入账户" echo "按任意键继续..." read -n 1 -s -r -p "" ;; 11) # socks5服务功能 while true; do clear print_menu_header "SOCKS5 服务功能" print_menu_option "1" "搭建v2ray客户端" print_menu_option "2" "测试是否联通" print_menu_option "3" "重启v2ray" print_menu_option "4" "开启代理本机" print_menu_option "5" "关闭代理本机" print_menu_option "6" "测试本机代理" print_menu_option "7" "卸载服务" print_menu_option "q" "返回" $RED echo read -e -p "请输入选项: " choice # v2ray 安装函数 function socks5_install() { echo -e "${YELLOW}正在安装v2ray客户端 (版本v5.6.0)...${NC}" if command -v install-v2ray.sh &>/dev/null; then install-v2ray.sh --version v5.6.0 if systemctl is-active --quiet v2ray; then echo -e "\n${GREEN}✓ v2ray安装成功并已启动!${NC}" echo -e "\n${CYAN}配置文件位置: /usr/local/etc/v2ray/config.json${NC}" echo -e "${CYAN}配置文件修改后，运行以下命令使其生效:${NC}" echo -e " ${WHITE}systemctl daemon-reload${NC}" echo -e " ${WHITE}systemctl restart v2ray${NC}" else echo -e "\n${RED}✗ v2ray安装完成但服务未能启动${NC}" echo -e "${YELLOW}请检查配置文件是否正确${NC}" fi else echo -e "${RED}✗ 安装脚本不存在，请确认系统环境${NC}" fi } # 连接测试函数 function socks5_test() { echo -e "${YELLOW}正在测试SOCKS5连接 (127.0.0.1:10808)...${NC}" echo -e "${CYAN}尝试连接到google.com...${NC}\n" timeout 10 curl --silent --show-error --socks5 127.0.0.1:10808 -I https://www.google.com &>/dev/null if [ $? -eq 0 ]; then echo -e "${GREEN}✓ 连接测试成功!${NC}" echo -e "${GREEN}SOCKS5代理正常工作${NC}" else echo -e "${RED}✗ 连接测试失败!${NC}" echo -e "${YELLOW}可能的原因:${NC}" echo -e " - v2ray服务未运行 (检查: systemctl status v2ray)" echo -e " - 配置文件有误 (检查: /usr/local/etc/v2ray/config.json)" echo -e " - 代理上游连接失败 (检查配置中的服务器地址)" fi } # 重启v2ray函数 function socks5_restart() { echo -e "${YELLOW}正在重启v2ray服务...${NC}" # 检查服务是否存在 if ! systemctl list-unit-files | grep -q v2ray; then echo -e "${RED}✗ v2ray服务不存在，请先安装${NC}" return 1 fi # 保存重启前状态 local was_active=false if systemctl is-active --quiet v2ray; then was_active=true fi # 执行重启 sudo systemctl restart v2ray sleep 2 # 给服务一些启动时间 # 检查重启后状态 if systemctl is-active --quiet v2ray; then echo -e "${GREEN}✓ v2ray服务重启成功${NC}" systemctl status v2ray --no-pager | grep "Active:" return 0 else echo -e "${RED}✗ 重启失败，服务未能正常启动${NC}" echo -e "${YELLOW}正在检查可能的错误:${NC}" # 配置文件检查 if [ -f "/usr/local/etc/v2ray/config.json" ]; then if ! jq . "/usr/local/etc/v2ray/config.json" &>/dev/null; then echo -e "${RED}✗ 配置文件JSON格式错误${NC}" fi else echo -e "${RED}✗ 配置文件不存在${NC}" fi # 显示最近的日志 echo -e "\n${YELLOW}服务日志 (最近10行):${NC}" sudo journalctl -u v2ray -n 10 --no-pager # 如果本来是启动的，现在挂了，尝试恢复之前的状态 if [ "$was_active" = true ]; then echo -e "\n${YELLOW}尝试恢复之前的运行状态...${NC}" sudo systemctl start v2ray fi return 1 fi } # 开启系统代理 function socks5_enable_proxy() { echo -e "${YELLOW}正在设置系统代理...${NC}" # 立即设置当前会话的代理环境变量 export https_proxy="127.0.0.1:10809" export http_proxy="127.0.0.1:10809" export all_proxy="socks5://127.0.0.1:10808" # 检查代理是否已永久设置 if grep -q 'export https_proxy="127.0.0.1:10809"' ~/.bashrc; then echo -e "${GREEN}✓ 代理已激活（当前会话和永久配置）${NC}" else # 添加代理设置到.bashrc实现永久生效 echo 'export https_proxy="127.0.0.1:10809"' >>~/.bashrc echo 'export http_proxy="127.0.0.1:10809"' >>~/.bashrc echo 'export all_proxy="socks5://127.0.0.1:10808"' >>~/.bashrc echo -e "${GREEN}✓ 代理已激活（当前会话）${NC}" echo -e "${GREEN}✓ 已添加到永久配置（.bashrc）${NC}" fi # 显示当前活动的代理设置 echo -e "\n${CYAN}当前代理设置:${NC}" echo -e " https_proxy = ${https_proxy}" echo -e " http_proxy = ${http_proxy}" echo -e " all_proxy = ${all_proxy}" } # 关闭系统代理 function socks5_disable_proxy() { echo -e "${YELLOW}正在关闭系统代理...${NC}" local changes_made=false # 1. 先清除当前会话的代理设置 if [ -n "$https_proxy" ] || [ -n "$http_proxy" ] || [ -n "$all_proxy" ]; then unset https_proxy unset http_proxy unset all_proxy changes_made=true echo -e "${GREEN}✓ 已清除当前会话的代理环境变量${NC}" fi # 2. 从.bashrc中移除永久配置 if grep -q 'export.*_proxy=' ~/.bashrc; then # 创建备份 cp ~/.bashrc ~/.bashrc.proxy.bak # 移除所有代理设置 sed -i '/export.*_proxy=/d' ~/.bashrc changes_made=true echo -e "${GREEN}✓ 已从永久配置(.bashrc)中移除代理设置${NC}" echo -e "${CYAN} 备份已保存到 ~/.bashrc.proxy.bak${NC}" fi if [ "$changes_made" = false ]; then echo -e "${YELLOW}未发现任何代理设置，无需操作${NC}" else # 验证当前状态 echo -e "\n${CYAN}当前代理状态:${NC}" if [ -z "$https_proxy" ] && [ -z "$http_proxy" ] && [ -z "$all_proxy" ]; then echo -e "${GREEN}✓ 已确认当前会话中无代理环境变量${NC}" else echo -e "${RED}✗ 警告: 一些代理变量仍然存在${NC}" fi fi } # 测试系统代理 function socks5_test_system_proxy() { echo -e "${YELLOW}正在测试系统代理...${NC}" local proxy_status="未设置" local connection_status="未知" local curl_output="" local temp_file="/tmp/proxy_test_$$.tmp" # 1. 先检查代理环境变量是否在当前会话中存在 if [ -n "$https_proxy" ] || [ -n "$http_proxy" ] || [ -n "$all_proxy" ]; then echo -e "${CYAN}当前会话检测到以下代理环境变量:${NC}" [ -n "$https_proxy" ] && echo -e " https_proxy = ${https_proxy}" [ -n "$http_proxy" ] && echo -e " http_proxy = ${http_proxy}" [ -n "$all_proxy" ] && echo -e " all_proxy = ${all_proxy}" proxy_status="已设置" else echo -e "${YELLOW}当前会话未检测到代理环境变量${NC}" # 检查.bashrc中是否有配置但未加载 if grep -q 'export.*_proxy=' ~/.bashrc; then echo -e "${YELLOW}提示: 在.bashrc中发现代理设置，但在当前会话中未激活${NC}" echo -e "${YELLOW}运行 'source ~/.bashrc' 或选择选项4重新激活代理${NC}" fi fi # 2. 检查v2ray服务状态 echo -e "\n${CYAN}检查v2ray服务状态:${NC}" if systemctl is-active --quiet v2ray 2>/dev/null; then echo -e " v2ray服务: ${GREEN}运行中${NC}" else echo -e " v2ray服务: ${RED}未运行${NC}" echo -e "${YELLOW}提示: 即使设置了环境变量，没有运行的v2ray服务也无法提供代理功能${NC}" echo -e "${YELLOW}请使用选项3重启v2ray服务${NC}" fi # 3. 实际连接测试 echo -e "\n${CYAN}正在测试连接到google.com...${NC}" echo -e "(测试过程可能需要几秒钟...)" # 使用curl测试连接，将输出存入临时文件 timeout 15 curl --silent --show-error -I https://www.google.com >"$temp_file" 2>&1 local curl_result=$? if [ $curl_result -eq 0 ]; then # 连接成功 local status_code=$(grep -E "^HTTP" "$temp_file" | awk '{print $2}') echo -e "${GREEN}✓ 连接测试成功! (HTTP状态码: $status_code)${NC}" connection_status="成功" # 检查抓取到的内容是否是谷歌页面 if grep -q "Server: gws" "$temp_file"; then echo -e "${GREEN}✓ 确认连接到谷歌服务器${NC}" else echo -e "${YELLOW}⚠ 已连接，但可能不是谷歌的服务器${NC}" fi else # 连接失败 echo -e "${RED}✗ 连接测试失败!${NC}" connection_status="失败" # 错误诊断 echo -e "${YELLOW}详细诊断:${NC}" # 检查超时问题 if [ $curl_result -eq 124 ]; then echo -e " - ${RED}连接超时${NC} - 代理可能速度太慢或无法到达目标" fi # 测试DNS解析 echo -e " - 检查DNS解析: " if host www.google.com &>/dev/null; then echo -e " ${GREEN}DNS正常${NC} - 可以解析域名" else echo -e " ${RED}DNS问题${NC} - 无法解析域名" fi # 检查是否安装了host命令 if ! command -v host &>/dev/null; then echo -e " - 安装DNS工具以进行更好的诊断..." sudo apt-get install -y dnsutils &>/dev/null fi # 检查本地连接 echo -e " - 检查本地代理: " if curl --silent --connect-timeout 5 --socks5 127.0.0.1:10808 -I http://localhost &>/dev/null; then echo -e " ${GREEN}本地代理服务正常${NC}" else echo -e " ${RED}本地代理服务问题${NC} - 无法连接到127.0.0.1:10808" fi fi # 清理临时文件 rm -f "$temp_file" # 总结 echo -e "\n${CYAN}=== 测试总结 ===${NC}" echo -e "代理环境变量: ${proxy_status}" echo -e "v2ray服务: $(systemctl is-active --quiet v2ray 2>/dev/null && echo "运行中" || echo "未运行")" echo -e "连接测试: ${connection_status}" if [ "$connection_status" = "失败" ]; then echo -e "\n${YELLOW}建议解决步骤:${NC}" echo -e "1. 使用选项4重新激活代理环境变量" echo -e "2. 使用选项3重启v2ray服务" echo -e "3. 检查v2ray配置文件 (/usr/local/etc/v2ray/config.json)" fi } # 卸载服务 function socks5_uninstall() { echo -e "${YELLOW}即将卸载v2ray服务...${NC}" echo -e "${RED}此操作将删除v2ray服务及其配置文件${NC}" read -e -p "是否继续? (y/n): " confirm if [[ "$confirm" == "y" || "$confirm" == "Y" ]]; then echo -e "${YELLOW}正在卸载v2ray...${NC}" # 检查卸载脚本是否存在 if command -v install-v2ray.sh &>/dev/null; then install-v2ray.sh --remove # 删除配置文件 if [ -f "/usr/local/etc/v2ray/config.json" ]; then rm -f /usr/local/etc/v2ray/config.json echo -e "${CYAN}已删除配置文件${NC}" fi # 检查是否有遗留服务 if systemctl list-unit-files | grep -q v2ray; then echo -e "${YELLOW}检测到服务文件残留，尝试清理...${NC}" sudo systemctl disable v2ray sudo rm -f /etc/systemd/system/v2ray.service sudo systemctl daemon-reload fi echo -e "${GREEN}✓ v2ray已成功卸载${NC}" else echo -e "${RED}✗ 卸载脚本不存在${NC}" echo -e "${YELLOW}尝试手动删除...${NC}" # 停止并禁用服务 if systemctl list-unit-files | grep -q v2ray; then sudo systemctl stop v2ray sudo systemctl disable v2ray sudo rm -f /etc/systemd/system/v2ray.service sudo systemctl daemon-reload fi # 删除二进制文件 sudo rm -rf /usr/local/bin/v2ray sudo rm -rf /usr/local/etc/v2ray sudo rm -rf /usr/local/share/v2ray echo -e "${GREEN}✓ v2ray已手动清理${NC}" fi # 清理代理设置 socks5_disable_proxy else echo -e "${YELLOW}卸载已取消${NC}" fi } # 处理用户选择 case "$choice" in 1) socks5_install ;; 2) socks5_test ;; 3) socks5_restart ;; 4) socks5_enable_proxy ;; 5) socks5_disable_proxy ;; 6) socks5_test_system_proxy ;; 7) socks5_uninstall ;; q | Q) break ;; *) echo -e "${RED}无效选项，请重试${NC}" ;; esac echo echo -e "${BLUE}按回车继续...${NC}" read -e -p "" dummy done ;; a | A | update) echo -e "${YELLOW}正在更新系统...${NC}" # 优化系统更新逻辑 echo -e "${CYAN}1. 更新软件源...${NC}" sudo apt-get update # 检查可用更新数量 updates_available=$(apt list --upgradable 2>/dev/null | grep -c upgradable) echo -e "${CYAN}发现 ${YELLOW}$updates_available${CYAN} 个可用更新${NC}" if [ $updates_available -gt 0 ]; then echo -e "${CYAN}2. 安装更新...${NC}" sudo apt-get upgrade -y # 检查是否有发行版更新 dist_upgrade_needed=$(apt-get --simulate dist-upgrade | grep -c "^Inst") if [ $dist_upgrade_needed -gt 0 ]; then echo -e "${YELLOW}发现系统级更新，是否安装？(y/n)${NC}" read -e -p "(y/n): " upgrade_response if [[ "$upgrade_response" == "y" || "$upgrade_response" == "Y" ]]; then echo -e "${CYAN}3. 安装系统级更新...${NC}" sudo apt-get dist-upgrade -y fi fi echo -e "${CYAN}4. 清理不再需要的依赖...${NC}" sudo apt-get autoremove -y echo -e "${GREEN}✓ 系统更新完成！${NC}" else echo -e "${GREEN}✓ 系统已是最新！${NC}" fi ;; c | C | caidanu) echo -e "${YELLOW}正在检查脚本更新...${NC}" # 显示当前版本 echo -e "${CYAN}当前版本: ${GREEN}v${SCRIPT_VERSION}${NC}" # 检查网络连接 echo -e "${CYAN}检查网络连接...${NC}" # 尝试使用不同的方式检查网络 if ping -c 1 -W 2 8.8.8.8 &>/dev/null; then echo -e "${GREEN}网络连接正常${NC}" else echo -e "${RED}✗ 无法连接到互联网，请检查网络连接${NC}" read -e -p "是否继续尝试更新？(y/n): " continue_update if [[ "$continue_update" != "y" && "$continue_update" != "Y" ]]; then echo -e "${YELLOW}更新已取消${NC}" exit 0 fi fi # 获取远程版本 echo -e "${CYAN}正在获取远程版本信息...${NC}" REMOTE_VERSION=$(get_remote_version) if [ -z "$REMOTE_VERSION" ]; then echo -e "${RED}✗ 无法获取远程版本信息${NC}" read -e -p "是否继续尝试更新？(y/n): " continue_update if [[ "$continue_update" != "y" && "$continue_update" != "Y" ]]; then echo -e "${YELLOW}更新已取消${NC}" exit 0 fi else echo -e "${CYAN}远程版本: ${GREEN}v${REMOTE_VERSION}${NC}" # 比较版本 VERSION_COMPARE=$(compare_versions "$SCRIPT_VERSION" "$REMOTE_VERSION") case "$VERSION_COMPARE" in "equal") echo -e "${GREEN}✓ 当前已是最新版本，无需更新${NC}" read -e -p "是否强制更新？(y/n): " force_update if [[ "$force_update" != "y" && "$force_update" != "Y" ]]; then echo -e "${YELLOW}更新已取消${NC}" exit 0 fi ;; "newer") echo -e "${YELLOW}! 当前版本比远程版本更新，可能是开发版本${NC}" read -e -p "是否继续更新？(y/n): " continue_update if [[ "$continue_update" != "y" && "$continue_update" != "Y" ]]; then echo -e "${YELLOW}更新已取消${NC}" exit 0 fi ;; "older") echo -e "${YELLOW}! 发现新版本，准备更新${NC}" ;; *) echo -e "${YELLOW}! 版本比较失败，将继续更新${NC}" ;; esac fi # 设置下载URL GITHUB_URL="https://raw.githubusercontent.com/LeoJyenn/hinas/main/caidan.sh" # 更新脚本 echo -e "${CYAN}从GitHub下载最新版本...${NC}" if curl -s --connect-timeout 10 -m 30 -o /etc/caidan/caidan.sh.new $GITHUB_URL; then # 检查文件完整性 if [ -f "/etc/caidan/caidan.sh.new" ] && [ -s "/etc/caidan/caidan.sh.new" ]; then # 检查下载的文件是否包含版本号 NEW_VERSION=$(grep -m1 "^SCRIPT_VERSION=" /etc/caidan/caidan.sh.new | cut -d'"' -f2) if [ -n "$NEW_VERSION" ]; then echo -e "${CYAN}已下载版本: ${GREEN}v${NEW_VERSION}${NC}" else echo -e "${YELLOW}警告: 无法在下载的文件中找到版本号${NC}" fi chmod +x /etc/caidan/caidan.sh.new # 修复可能的换行符问题 sed -i 's/\r$//' /etc/caidan/caidan.sh.new 2>/dev/null mv /etc/caidan/caidan.sh.new /etc/caidan/caidan.sh ln -sf /etc/caidan/caidan.sh /usr/bin/caidan echo -e "${GREEN}✓ 脚本更新成功，重新执行 [caidan] 生效${NC}" if [ -n "$NEW_VERSION" ] && [ "$NEW_VERSION" != "$SCRIPT_VERSION" ]; then echo -e "${GREEN}✓ 版本已从 v${SCRIPT_VERSION} 更新至 v${NEW_VERSION}${NC}" fi else echo -e "${RED}✗ 下载的文件不完整，更新失败${NC}" fi else echo -e "${RED}✗ 更新失败，网络错误或GitHub不可访问${NC}" fi exit 0 ;; e | E | caidanun) unInstall-caidan ;; b | B | 0) # 系统还原 echo -e "${RED}警告:此操作将还原系统,请做好资料备份，是否要继续？(y/n)${NC}" read -e -p "(y/n): " response if [ "$response" = "y" ]; then recoverbackup elif [ "$response" = "n" ]; then echo -e "${RED}取消操作${NC}" else echo -e "${RED}无效的选择${NC}" fi echo echo -e "${BLUE}按任意键继续...${NC}" read -n 1 -s -r -p "" ;; d | D | pw | PW) # 修改 root 密码 echo -e "${YELLOW}正在修改root密码...${NC}" sudo passwd root echo echo -e "${BLUE}按任意键继续...${NC}" read -n 1 -s -r -p "" ;; f | F | r | R) # 重启系统 echo -e "${YELLOW}系统即将重启...${NC}" echo -e "${CYAN}将在5秒后重启，按Ctrl+C取消...${NC}" sleep 5 sudo reboot ;; q | Q) # 退出 echo -e "${RED}已退出...${NC}" exit 0 ;; *) echo -e "${RED}无效的选择${NC}" echo echo -e "${BLUE}按任意键继续...${NC}" read -n 1 -s -r -p "" ;; esac done # 调用main函数，确保脚本被直接执行时显示菜单 main