(kicad_pcb (version 20171130) (host pcbnew "(5.1.8)-1") (general (thickness 1.6) (drawings 10) (tracks 247) (zones 0) (modules 35) (nets 49) ) (page A4) (layers (0 F.Cu signal) (31 B.Cu signal) (32 B.Adhes user) (33 F.Adhes user) (34 B.Paste user) (35 F.Paste user) (36 B.SilkS user) (37 F.SilkS user) (38 B.Mask user) (39 F.Mask user) (40 Dwgs.User user) (41 Cmts.User user) (42 Eco1.User user) (43 Eco2.User user) (44 Edge.Cuts user) (45 Margin user) (46 B.CrtYd user) (47 F.CrtYd user) (48 B.Fab user) (49 F.Fab user) ) (setup (last_trace_width 1) (trace_clearance 0.4) (zone_clearance 0.508) (zone_45_only no) (trace_min 0.2) (via_size 2) (via_drill 1) (via_min_size 0.4) (via_min_drill 0.3) (uvia_size 0.3) (uvia_drill 0.1) (uvias_allowed no) (uvia_min_size 0.2) (uvia_min_drill 0.1) (edge_width 0.05) (segment_width 0.2) (pcb_text_width 0.3) (pcb_text_size 1.5 1.5) (mod_edge_width 0.12) (mod_text_size 1 1) (mod_text_width 0.15) (pad_size 6 6) (pad_drill 3) (pad_to_mask_clearance 0) (aux_axis_origin 0 0) (visible_elements 7FFFFFFF) (pcbplotparams (layerselection 0x010fc_ffffffff) (usegerberextensions false) (usegerberattributes true) (usegerberadvancedattributes true) (creategerberjobfile true) (excludeedgelayer true) (linewidth 0.100000) (plotframeref false) (viasonmask false) (mode 1) (useauxorigin false) (hpglpennumber 1) (hpglpenspeed 20) (hpglpendiameter 15.000000) (psnegative false) (psa4output false) (plotreference true) (plotvalue true) (plotinvisibletext false) (padsonsilk false) (subtractmaskfromsilk false) (outputformat 1) (mirror false) (drillshape 1) (scaleselection 1) (outputdirectory "")) ) (net 0 "") (net 1 GND) (net 2 A) (net 3 B) (net 4 SW) (net 5 VCC) (net 6 "Net-(D2-Pad2)") (net 7 "Net-(D3-Pad2)") (net 8 "Net-(Q1-Pad3)") (net 9 "Net-(Q1-Pad1)") (net 10 SCL) (net 11 +3V3) (net 12 SDA) (net 13 LED_PWM) (net 14 "Net-(R9-Pad1)") (net 15 "Net-(R10-Pad1)") (net 16 "Net-(R11-Pad2)") (net 17 "Net-(U1-Pad37)") (net 18 "Net-(U1-Pad36)") (net 19 "Net-(U1-Pad35)") (net 20 "Net-(U1-Pad34)") (net 21 "Net-(U1-Pad33)") (net 22 "Net-(U1-Pad32)") (net 23 "Net-(U1-Pad31)") (net 24 "Net-(U1-Pad30)") (net 25 "Net-(U1-Pad29)") (net 26 "Net-(U1-Pad25)") (net 27 "Net-(U1-Pad24)") (net 28 "Net-(U1-Pad23)") (net 29 "Net-(U1-Pad22)") (net 30 "Net-(U1-Pad21)") (net 31 "Net-(U1-Pad12)") (net 32 "Net-(U1-Pad11)") (net 33 "Net-(U1-Pad10)") (net 34 "Net-(U1-Pad9)") (net 35 "Net-(U1-Pad8)") (net 36 "Net-(U1-Pad7)") (net 37 "Net-(U1-Pad6)") (net 38 "Net-(U1-Pad5)") (net 39 "Net-(U1-Pad4)") (net 40 "Net-(U1-Pad3)") (net 41 "Net-(U1-Pad2)") (net 42 "Net-(U1-Pad1)") (net 43 "Net-(BZ1-Pad2)") (net 44 "Net-(BZ1-Pad1)") (net 45 ENCLOSER) (net 46 "Net-(J3-Pad1)") (net 47 "Net-(Q3-Pad1)") (net 48 BUZZER) (net_class Default "This is the default net class." (clearance 0.4) (trace_width 1) (via_dia 2) (via_drill 1) (uvia_dia 0.3) (uvia_drill 0.1) (add_net +3V3) (add_net A) (add_net B) (add_net BUZZER) (add_net ENCLOSER) (add_net GND) (add_net LED_PWM) (add_net "Net-(BZ1-Pad1)") (add_net "Net-(BZ1-Pad2)") (add_net "Net-(D2-Pad2)") (add_net "Net-(D3-Pad2)") (add_net "Net-(J3-Pad1)") (add_net "Net-(Q1-Pad1)") (add_net "Net-(Q1-Pad3)") (add_net "Net-(Q3-Pad1)") (add_net "Net-(R10-Pad1)") (add_net "Net-(R11-Pad2)") (add_net "Net-(R9-Pad1)") (add_net "Net-(U1-Pad1)") (add_net "Net-(U1-Pad10)") (add_net "Net-(U1-Pad11)") (add_net "Net-(U1-Pad12)") (add_net "Net-(U1-Pad2)") (add_net "Net-(U1-Pad21)") (add_net "Net-(U1-Pad22)") (add_net "Net-(U1-Pad23)") (add_net "Net-(U1-Pad24)") (add_net "Net-(U1-Pad25)") (add_net "Net-(U1-Pad29)") (add_net "Net-(U1-Pad3)") (add_net "Net-(U1-Pad30)") (add_net "Net-(U1-Pad31)") (add_net "Net-(U1-Pad32)") (add_net "Net-(U1-Pad33)") (add_net "Net-(U1-Pad34)") (add_net "Net-(U1-Pad35)") (add_net "Net-(U1-Pad36)") (add_net "Net-(U1-Pad37)") (add_net "Net-(U1-Pad4)") (add_net "Net-(U1-Pad5)") (add_net "Net-(U1-Pad6)") (add_net "Net-(U1-Pad7)") (add_net "Net-(U1-Pad8)") (add_net "Net-(U1-Pad9)") (add_net SCL) (add_net SDA) (add_net SW) (add_net VCC) ) (module Buzzer_Beeper:Buzzer_12x9.5RM7.6 (layer F.Cu) (tedit 5A030281) (tstamp 5FDEDA25) (at 125.095 106.68 180) (descr "Generic Buzzer, D12mm height 9.5mm with RM7.6mm") (tags buzzer) (path /5FDFA379) (fp_text reference BZ1 (at 3.8 -7.2) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value Buzzer (at 3.8 7.4) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_circle (center 3.8 0) (end 9.9 0) (layer F.SilkS) (width 0.12)) (fp_circle (center 3.8 0) (end 4.8 0) (layer F.Fab) (width 0.1)) (fp_circle (center 3.8 0) (end 9.8 0) (layer F.Fab) (width 0.1)) (fp_circle (center 3.8 0) (end 10.05 0) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 3.8 -4) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user + (at -0.01 -2.54) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user + (at -0.01 -2.54) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 2 thru_hole circle (at 7.6 0 180) (size 2 2) (drill 1) (layers *.Cu *.Mask) (net 43 "Net-(BZ1-Pad2)")) (pad 1 thru_hole rect (at 0 0 180) (size 2 2) (drill 1) (layers *.Cu *.Mask) (net 44 "Net-(BZ1-Pad1)")) (model ${KISYS3DMOD}/Buzzer_Beeper.3dshapes/Buzzer_12x9.5RM7.6.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Diode_SMD:D_SOD-123 (layer B.Cu) (tedit 58645DC7) (tstamp 5FDED671) (at 117.475 102.615 270) (descr SOD-123) (tags SOD-123) (path /5FDFB1C3) (attr smd) (fp_text reference D1 (at 0 2 90) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value 1N4148W (at 0 -2.1 90) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_line (start -2.25 1) (end 1.65 1) (layer B.SilkS) (width 0.12)) (fp_line (start -2.25 -1) (end 1.65 -1) (layer B.SilkS) (width 0.12)) (fp_line (start -2.35 1.15) (end -2.35 -1.15) (layer B.CrtYd) (width 0.05)) (fp_line (start 2.35 -1.15) (end -2.35 -1.15) (layer B.CrtYd) (width 0.05)) (fp_line (start 2.35 1.15) (end 2.35 -1.15) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.35 1.15) (end 2.35 1.15) (layer B.CrtYd) (width 0.05)) (fp_line (start -1.4 0.9) (end 1.4 0.9) (layer B.Fab) (width 0.1)) (fp_line (start 1.4 0.9) (end 1.4 -0.9) (layer B.Fab) (width 0.1)) (fp_line (start 1.4 -0.9) (end -1.4 -0.9) (layer B.Fab) (width 0.1)) (fp_line (start -1.4 -0.9) (end -1.4 0.9) (layer B.Fab) (width 0.1)) (fp_line (start -0.75 0) (end -0.35 0) (layer B.Fab) (width 0.1)) (fp_line (start -0.35 0) (end -0.35 0.55) (layer B.Fab) (width 0.1)) (fp_line (start -0.35 0) (end -0.35 -0.55) (layer B.Fab) (width 0.1)) (fp_line (start -0.35 0) (end 0.25 0.4) (layer B.Fab) (width 0.1)) (fp_line (start 0.25 0.4) (end 0.25 -0.4) (layer B.Fab) (width 0.1)) (fp_line (start 0.25 -0.4) (end -0.35 0) (layer B.Fab) (width 0.1)) (fp_line (start 0.25 0) (end 0.75 0) (layer B.Fab) (width 0.1)) (fp_line (start -2.25 1) (end -2.25 -1) (layer B.SilkS) (width 0.12)) (fp_text user %R (at 0 2 90) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (pad 2 smd rect (at 1.65 0 270) (size 0.9 1.2) (layers B.Cu B.Paste B.Mask) (net 43 "Net-(BZ1-Pad2)")) (pad 1 smd rect (at -1.65 0 270) (size 0.9 1.2) (layers B.Cu B.Paste B.Mask) (net 5 VCC)) (model ${KISYS3DMOD}/Diode_SMD.3dshapes/D_SOD-123.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder (layer B.Cu) (tedit 5F68FEEE) (tstamp 5FDED639) (at 125.095 102.59 90) (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (path /5FE613C8) (attr smd) (fp_text reference R17 (at 0 -1.905 90) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value 600 (at 0 -1.82 90) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_line (start 2.45 -1.12) (end -2.45 -1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start 2.45 1.12) (end 2.45 -1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.45 1.12) (end 2.45 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.45 -1.12) (end -2.45 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -0.727064 -0.91) (end 0.727064 -0.91) (layer B.SilkS) (width 0.12)) (fp_line (start -0.727064 0.91) (end 0.727064 0.91) (layer B.SilkS) (width 0.12)) (fp_line (start 1.6 -0.8) (end -1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start 1.6 0.8) (end 1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start -1.6 0.8) (end 1.6 0.8) (layer B.Fab) (width 0.1)) (fp_line (start -1.6 -0.8) (end -1.6 0.8) (layer B.Fab) (width 0.1)) (fp_text user %R (at 0 0 90) (layer B.Fab) (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)) ) (pad 2 smd roundrect (at 1.55 0 90) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.192308) (net 5 VCC)) (pad 1 smd roundrect (at -1.55 0 90) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.192308) (net 44 "Net-(BZ1-Pad1)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module MaoTimer:SH1106_I2C (layer F.Cu) (tedit 5FDE886E) (tstamp 5FDE9201) (at 63.5 48.26) (path /5FDBB679) (fp_text reference U2 (at 15.24 -3.81) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value SH1106_I2C (at 10.16 -7.62) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -2.5 31) (end -2.5 -2.5) (layer F.SilkS) (width 0.12)) (fp_line (start 32.9 31) (end -2.5 31) (layer F.SilkS) (width 0.12)) (fp_line (start 32.9 -2.5) (end 32.9 31) (layer F.SilkS) (width 0.12)) (fp_line (start -2.5 -2.5) (end 32.9 -2.5) (layer F.SilkS) (width 0.12)) (pad 4 thru_hole circle (at 19.01 -0.5) (size 2 2) (drill 1) (layers *.Cu *.Mask) (net 12 SDA)) (pad 3 thru_hole circle (at 16.47 -0.5) (size 2 2) (drill 1) (layers *.Cu *.Mask) (net 10 SCL)) (pad 2 thru_hole circle (at 13.93 -0.5) (size 2 2) (drill 1) (layers *.Cu *.Mask) (net 1 GND)) (pad 1 thru_hole circle (at 11.39 -0.5) (size 2 2) (drill 1) (layers *.Cu *.Mask) (net 11 +3V3)) (pad ~ thru_hole circle (at 30.4 0) (size 6 6) (drill 3) (layers *.Cu *.Mask)) (pad ~ thru_hole circle (at 30.4 28.5) (size 6 6) (drill 3) (layers *.Cu *.Mask)) (pad ~ thru_hole circle (at 0 28.5) (size 6 6) (drill 3) (layers *.Cu *.Mask)) (pad ~ thru_hole circle (at 0 0) (size 6 6) (drill 3) (layers *.Cu *.Mask)) ) (module MaoTimer:MiniF4_V3.0 (layer F.Cu) (tedit 5FD68D1B) (tstamp 5FDE91F1) (at 63.5 100.965 90) (path /5FD6BABD) (fp_text reference U1 (at 10.16 -3.81 180) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value V3.0 (at 7.62 2.54 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -2.54 50.8) (end -2.54 -2.54) (layer F.SilkS) (width 0.12)) (fp_line (start 17.78 50.8) (end -2.54 50.8) (layer F.SilkS) (width 0.12)) (fp_line (start 17.78 -2.54) (end 17.78 50.8) (layer F.SilkS) (width 0.12)) (fp_line (start -2.54 -2.54) (end 17.78 -2.54) (layer F.SilkS) (width 0.12)) (pad 40 thru_hole circle (at 15.24 0 90) (size 2 2) (drill 1) (layers *.Cu *.Mask) (net 5 VCC)) (pad 39 thru_hole circle (at 15.24 2.54 90) (size 2 2) (drill 1) (layers *.Cu *.Mask) (net 1 GND)) (pad 38 thru_hole circle (at 15.24 5.08 90) (size 2 2) (drill 1) (layers *.Cu *.Mask) (net 11 +3V3)) (pad 37 thru_hole circle (at 15.24 7.62 90) (size 2 2) (drill 1) (layers *.Cu *.Mask) (net 17 "Net-(U1-Pad37)")) (pad 36 thru_hole circle (at 15.24 10.16 90) (size 2 2) (drill 1) (layers *.Cu *.Mask) (net 18 "Net-(U1-Pad36)")) (pad 35 thru_hole circle (at 15.24 12.7 90) (size 2 2) (drill 1) (layers *.Cu *.Mask) (net 19 "Net-(U1-Pad35)")) (pad 34 thru_hole circle (at 15.24 15.24 90) (size 2 2) (drill 1) (layers *.Cu *.Mask) (net 20 "Net-(U1-Pad34)")) (pad 33 thru_hole circle (at 15.24 17.78 90) (size 2 2) (drill 1) (layers *.Cu *.Mask) (net 21 "Net-(U1-Pad33)")) (pad 32 thru_hole circle (at 15.24 20.32 90) (size 2 2) (drill 1) (layers *.Cu *.Mask) (net 22 "Net-(U1-Pad32)")) (pad 31 thru_hole circle (at 15.24 22.86 90) (size 2 2) (drill 1) (layers *.Cu *.Mask) (net 23 "Net-(U1-Pad31)")) (pad 30 thru_hole circle (at 15.24 25.4 90) (size 2 2) (drill 1) (layers *.Cu *.Mask) (net 24 "Net-(U1-Pad30)")) (pad 29 thru_hole circle (at 15.24 27.94 90) (size 2 2) (drill 1) (layers *.Cu *.Mask) (net 25 "Net-(U1-Pad29)")) (pad 28 thru_hole circle (at 15.24 30.48 90) (size 2 2) (drill 1) (layers *.Cu *.Mask) (net 2 A)) (pad 27 thru_hole circle (at 15.24 33.02 90) (size 2 2) (drill 1) (layers *.Cu *.Mask) (net 3 B)) (pad 26 thru_hole circle (at 15.24 35.56 90) (size 2 2) (drill 1) (layers *.Cu *.Mask) (net 4 SW)) (pad 25 thru_hole circle (at 15.24 38.1 90) (size 2 2) (drill 1) (layers *.Cu *.Mask) (net 26 "Net-(U1-Pad25)")) (pad 24 thru_hole circle (at 15.24 40.64 90) (size 2 2) (drill 1) (layers *.Cu *.Mask) (net 27 "Net-(U1-Pad24)")) (pad 23 thru_hole circle (at 15.24 43.18 90) (size 2 2) (drill 1) (layers *.Cu *.Mask) (net 28 "Net-(U1-Pad23)")) (pad 22 thru_hole circle (at 15.24 45.72 90) (size 2 2) (drill 1) (layers *.Cu *.Mask) (net 29 "Net-(U1-Pad22)")) (pad 21 thru_hole circle (at 15.24 48.26 90) (size 2 2) (drill 1) (layers *.Cu *.Mask) (net 30 "Net-(U1-Pad21)")) (pad 20 thru_hole circle (at 0 48.26 90) (size 2 2) (drill 1) (layers *.Cu *.Mask) (net 11 +3V3)) (pad 19 thru_hole circle (at 0 45.72 90) (size 2 2) (drill 1) (layers *.Cu *.Mask) (net 1 GND)) (pad 18 thru_hole circle (at 0 43.18 90) (size 2 2) (drill 1) (layers *.Cu *.Mask) (net 5 VCC)) (pad 17 thru_hole circle (at 0 40.64 90) (size 2 2) (drill 1) (layers *.Cu *.Mask) (net 13 LED_PWM)) (pad 16 thru_hole circle (at 0 38.1 90) (size 2 2) (drill 1) (layers *.Cu *.Mask) (net 48 BUZZER)) (pad 15 thru_hole circle (at 0 35.56 90) (size 2 2) (drill 1) (layers *.Cu *.Mask) (net 12 SDA)) (pad 14 thru_hole circle (at 0 33.02 90) (size 2 2) (drill 1) (layers *.Cu *.Mask) (net 10 SCL)) (pad 13 thru_hole circle (at 0 30.48 90) (size 2 2) (drill 1) (layers *.Cu *.Mask) (net 45 ENCLOSER)) (pad 12 thru_hole circle (at 0 27.94 90) (size 2 2) (drill 1) (layers *.Cu *.Mask) (net 31 "Net-(U1-Pad12)")) (pad 11 thru_hole circle (at 0 25.4 90) (size 2 2) (drill 1) (layers *.Cu *.Mask) (net 32 "Net-(U1-Pad11)")) (pad 10 thru_hole circle (at 0 22.86 90) (size 2 2) (drill 1) (layers *.Cu *.Mask) (net 33 "Net-(U1-Pad10)")) (pad 9 thru_hole circle (at 0 20.32 90) (size 2 2) (drill 1) (layers *.Cu *.Mask) (net 34 "Net-(U1-Pad9)")) (pad 8 thru_hole circle (at 0 17.78 90) (size 2 2) (drill 1) (layers *.Cu *.Mask) (net 35 "Net-(U1-Pad8)")) (pad 7 thru_hole circle (at 0 15.24 90) (size 2 2) (drill 1) (layers *.Cu *.Mask) (net 36 "Net-(U1-Pad7)")) (pad 6 thru_hole circle (at 0 12.7 90) (size 2 2) (drill 1) (layers *.Cu *.Mask) (net 37 "Net-(U1-Pad6)")) (pad 5 thru_hole circle (at 0 10.16 90) (size 2 2) (drill 1) (layers *.Cu *.Mask) (net 38 "Net-(U1-Pad5)")) (pad 4 thru_hole circle (at 0 7.62 90) (size 2 2) (drill 1) (layers *.Cu *.Mask) (net 39 "Net-(U1-Pad4)")) (pad 3 thru_hole circle (at 0 5.08 90) (size 2 2) (drill 1) (layers *.Cu *.Mask) (net 40 "Net-(U1-Pad3)")) (pad 2 thru_hole circle (at 0 2.54 90) (size 2 2) (drill 1) (layers *.Cu *.Mask) (net 41 "Net-(U1-Pad2)")) (pad 1 thru_hole circle (at 0 0 90) (size 2 2) (drill 1) (layers *.Cu *.Mask) (net 42 "Net-(U1-Pad1)")) ) (module Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm (layer F.Cu) (tedit 5A74C8CB) (tstamp 5FDE91C1) (at 104.775 69.85 90) (descr "Alps rotary encoder, EC12E... with switch, vertical shaft, http://www.alps.com/prod/info/E/HTML/Encoder/Incremental/EC11/EC11E15204A3.html") (tags "rotary encoder") (path /5FD7B070) (fp_text reference SW1 (at 17.145 2.54 180) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value CTRL (at 7.5 10.4 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_circle (center 7.5 2.5) (end 10.5 2.5) (layer F.Fab) (width 0.12)) (fp_circle (center 7.5 2.5) (end 10.5 2.5) (layer F.SilkS) (width 0.12)) (fp_line (start 16 9.6) (end -1.5 9.6) (layer F.CrtYd) (width 0.05)) (fp_line (start 16 9.6) (end 16 -4.6) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.5 -4.6) (end -1.5 9.6) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.5 -4.6) (end 16 -4.6) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.5 -3.3) (end 13.5 -3.3) (layer F.Fab) (width 0.12)) (fp_line (start 13.5 -3.3) (end 13.5 8.3) (layer F.Fab) (width 0.12)) (fp_line (start 13.5 8.3) (end 1.5 8.3) (layer F.Fab) (width 0.12)) (fp_line (start 1.5 8.3) (end 1.5 -2.2) (layer F.Fab) (width 0.12)) (fp_line (start 1.5 -2.2) (end 2.5 -3.3) (layer F.Fab) (width 0.12)) (fp_line (start 9.5 -3.4) (end 13.6 -3.4) (layer F.SilkS) (width 0.12)) (fp_line (start 13.6 8.4) (end 9.5 8.4) (layer F.SilkS) (width 0.12)) (fp_line (start 5.5 8.4) (end 1.4 8.4) (layer F.SilkS) (width 0.12)) (fp_line (start 5.5 -3.4) (end 1.4 -3.4) (layer F.SilkS) (width 0.12)) (fp_line (start 1.4 -3.4) (end 1.4 8.4) (layer F.SilkS) (width 0.12)) (fp_line (start 0 -1.3) (end -0.3 -1.6) (layer F.SilkS) (width 0.12)) (fp_line (start -0.3 -1.6) (end 0.3 -1.6) (layer F.SilkS) (width 0.12)) (fp_line (start 0.3 -1.6) (end 0 -1.3) (layer F.SilkS) (width 0.12)) (fp_line (start 7.5 -0.5) (end 7.5 5.5) (layer F.Fab) (width 0.12)) (fp_line (start 4.5 2.5) (end 10.5 2.5) (layer F.Fab) (width 0.12)) (fp_line (start 13.6 -3.4) (end 13.6 -1) (layer F.SilkS) (width 0.12)) (fp_line (start 13.6 1.2) (end 13.6 3.8) (layer F.SilkS) (width 0.12)) (fp_line (start 13.6 6) (end 13.6 8.4) (layer F.SilkS) (width 0.12)) (fp_line (start 7.5 2) (end 7.5 3) (layer F.SilkS) (width 0.12)) (fp_line (start 7 2.5) (end 8 2.5) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 11.1 6.3 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad A thru_hole rect (at 0 0 90) (size 2 2) (drill 1) (layers *.Cu *.Mask) (net 14 "Net-(R9-Pad1)")) (pad C thru_hole circle (at 0 2.5 90) (size 2 2) (drill 1) (layers *.Cu *.Mask) (net 1 GND)) (pad B thru_hole circle (at 0 5 90) (size 2 2) (drill 1) (layers *.Cu *.Mask) (net 15 "Net-(R10-Pad1)")) (pad MP thru_hole rect (at 7.5 -3.1 90) (size 3.2 2) (drill oval 2.8 1.5) (layers *.Cu *.Mask)) (pad MP thru_hole rect (at 7.5 8.1 90) (size 3.2 2) (drill oval 2.8 1.5) (layers *.Cu *.Mask)) (pad S2 thru_hole circle (at 14.5 0 90) (size 2 2) (drill 1) (layers *.Cu *.Mask) (net 1 GND)) (pad S1 thru_hole circle (at 14.5 5 90) (size 2 2) (drill 1) (layers *.Cu *.Mask) (net 16 "Net-(R11-Pad2)")) (model ${KISYS3DMOD}/Rotary_Encoder.3dshapes/RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder (layer B.Cu) (tedit 5F68FEEE) (tstamp 5FDE918A) (at 93.98 94.97 90) (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (path /5FE45CA7) (attr smd) (fp_text reference R16 (at 4.165 0 90) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value 10k (at 0 -1.82 90) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_line (start 2.45 -1.12) (end -2.45 -1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start 2.45 1.12) (end 2.45 -1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.45 1.12) (end 2.45 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.45 -1.12) (end -2.45 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -0.727064 -0.91) (end 0.727064 -0.91) (layer B.SilkS) (width 0.12)) (fp_line (start -0.727064 0.91) (end 0.727064 0.91) (layer B.SilkS) (width 0.12)) (fp_line (start 1.6 -0.8) (end -1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start 1.6 0.8) (end 1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start -1.6 0.8) (end 1.6 0.8) (layer B.Fab) (width 0.1)) (fp_line (start -1.6 -0.8) (end -1.6 0.8) (layer B.Fab) (width 0.1)) (fp_text user %R (at 0 0 90) (layer B.Fab) (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)) ) (pad 2 smd roundrect (at 1.55 0 90) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.192308) (net 11 +3V3)) (pad 1 smd roundrect (at -1.55 0 90) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.192308) (net 45 ENCLOSER)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder (layer B.Cu) (tedit 5F68FEEE) (tstamp 5FDE9179) (at 93.98 105.13 270) (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (path /5FE45C95) (attr smd) (fp_text reference R15 (at 4.09 0 270) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value 10k (at 0 -1.82 270) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_line (start 2.45 -1.12) (end -2.45 -1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start 2.45 1.12) (end 2.45 -1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.45 1.12) (end 2.45 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.45 -1.12) (end -2.45 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -0.727064 -0.91) (end 0.727064 -0.91) (layer B.SilkS) (width 0.12)) (fp_line (start -0.727064 0.91) (end 0.727064 0.91) (layer B.SilkS) (width 0.12)) (fp_line (start 1.6 -0.8) (end -1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start 1.6 0.8) (end 1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start -1.6 0.8) (end 1.6 0.8) (layer B.Fab) (width 0.1)) (fp_line (start -1.6 -0.8) (end -1.6 0.8) (layer B.Fab) (width 0.1)) (fp_text user %R (at 0 0 270) (layer B.Fab) (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)) ) (pad 2 smd roundrect (at 1.55 0 270) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.192308) (net 46 "Net-(J3-Pad1)")) (pad 1 smd roundrect (at -1.55 0 270) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.192308) (net 45 ENCLOSER)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder (layer B.Cu) (tedit 5F68FEEE) (tstamp 5FDED609) (at 104.14 108.94 270) (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (path /5FDEF75C) (attr smd) (fp_text reference R14 (at -4.165 0 270) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value 47k (at 0 -1.82 270) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_line (start 2.45 -1.12) (end -2.45 -1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start 2.45 1.12) (end 2.45 -1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.45 1.12) (end 2.45 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.45 -1.12) (end -2.45 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -0.727064 -0.91) (end 0.727064 -0.91) (layer B.SilkS) (width 0.12)) (fp_line (start -0.727064 0.91) (end 0.727064 0.91) (layer B.SilkS) (width 0.12)) (fp_line (start 1.6 -0.8) (end -1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start 1.6 0.8) (end 1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start -1.6 0.8) (end 1.6 0.8) (layer B.Fab) (width 0.1)) (fp_line (start -1.6 -0.8) (end -1.6 0.8) (layer B.Fab) (width 0.1)) (fp_text user %R (at 0 0 270) (layer B.Fab) (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)) ) (pad 2 smd roundrect (at 1.55 0 270) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.192308) (net 47 "Net-(Q3-Pad1)")) (pad 1 smd roundrect (at -1.55 0 270) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.192308) (net 1 GND)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder (layer B.Cu) (tedit 5F68FEEE) (tstamp 5FDED5D9) (at 101.6 108.94 90) (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (path /5FDEEDD1) (attr smd) (fp_text reference R13 (at 4.165 0 90) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value 4.7k (at 0 -1.82 90) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_line (start 2.45 -1.12) (end -2.45 -1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start 2.45 1.12) (end 2.45 -1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.45 1.12) (end 2.45 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.45 -1.12) (end -2.45 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -0.727064 -0.91) (end 0.727064 -0.91) (layer B.SilkS) (width 0.12)) (fp_line (start -0.727064 0.91) (end 0.727064 0.91) (layer B.SilkS) (width 0.12)) (fp_line (start 1.6 -0.8) (end -1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start 1.6 0.8) (end 1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start -1.6 0.8) (end 1.6 0.8) (layer B.Fab) (width 0.1)) (fp_line (start -1.6 -0.8) (end -1.6 0.8) (layer B.Fab) (width 0.1)) (fp_text user %R (at 0 0 90) (layer B.Fab) (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)) ) (pad 2 smd roundrect (at 1.55 0 90) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.192308) (net 48 BUZZER)) (pad 1 smd roundrect (at -1.55 0 90) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.192308) (net 47 "Net-(Q3-Pad1)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder (layer B.Cu) (tedit 5F68FEEE) (tstamp 5FDE9146) (at 114.3 68.58 270) (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (path /5FD959F5) (attr smd) (fp_text reference R12 (at 0 1.82 90) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value 10k (at 0 -1.82 90) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_line (start 2.45 -1.12) (end -2.45 -1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start 2.45 1.12) (end 2.45 -1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.45 1.12) (end 2.45 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.45 -1.12) (end -2.45 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -0.727064 -0.91) (end 0.727064 -0.91) (layer B.SilkS) (width 0.12)) (fp_line (start -0.727064 0.91) (end 0.727064 0.91) (layer B.SilkS) (width 0.12)) (fp_line (start 1.6 -0.8) (end -1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start 1.6 0.8) (end 1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start -1.6 0.8) (end 1.6 0.8) (layer B.Fab) (width 0.1)) (fp_line (start -1.6 -0.8) (end -1.6 0.8) (layer B.Fab) (width 0.1)) (fp_text user %R (at 0 0 90) (layer B.Fab) (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)) ) (pad 2 smd roundrect (at 1.55 0 270) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.192308) (net 11 +3V3)) (pad 1 smd roundrect (at -1.55 0 270) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.192308) (net 4 SW)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder (layer B.Cu) (tedit 5F68FEEE) (tstamp 5FDE9135) (at 109.22 60.68 90) (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (path /5FD9412F) (attr smd) (fp_text reference R11 (at 0 1.82 270) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value 10k (at 0 -1.82 270) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_line (start 2.45 -1.12) (end -2.45 -1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start 2.45 1.12) (end 2.45 -1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.45 1.12) (end 2.45 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.45 -1.12) (end -2.45 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -0.727064 -0.91) (end 0.727064 -0.91) (layer B.SilkS) (width 0.12)) (fp_line (start -0.727064 0.91) (end 0.727064 0.91) (layer B.SilkS) (width 0.12)) (fp_line (start 1.6 -0.8) (end -1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start 1.6 0.8) (end 1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start -1.6 0.8) (end 1.6 0.8) (layer B.Fab) (width 0.1)) (fp_line (start -1.6 -0.8) (end -1.6 0.8) (layer B.Fab) (width 0.1)) (fp_text user %R (at 0 0 270) (layer B.Fab) (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)) ) (pad 2 smd roundrect (at 1.55 0 90) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.192308) (net 16 "Net-(R11-Pad2)")) (pad 1 smd roundrect (at -1.55 0 90) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.192308) (net 4 SW)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder (layer B.Cu) (tedit 5F68FEEE) (tstamp 5FDE9124) (at 111.76 75.92 270) (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (path /5FD7DA68) (attr smd) (fp_text reference R10 (at 4.09 0 90) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value 10k (at 0 -1.82 90) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_line (start 2.45 -1.12) (end -2.45 -1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start 2.45 1.12) (end 2.45 -1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.45 1.12) (end 2.45 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.45 -1.12) (end -2.45 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -0.727064 -0.91) (end 0.727064 -0.91) (layer B.SilkS) (width 0.12)) (fp_line (start -0.727064 0.91) (end 0.727064 0.91) (layer B.SilkS) (width 0.12)) (fp_line (start 1.6 -0.8) (end -1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start 1.6 0.8) (end 1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start -1.6 0.8) (end 1.6 0.8) (layer B.Fab) (width 0.1)) (fp_line (start -1.6 -0.8) (end -1.6 0.8) (layer B.Fab) (width 0.1)) (fp_text user %R (at 0 0 90) (layer B.Fab) (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)) ) (pad 2 smd roundrect (at 1.55 0 270) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.192308) (net 3 B)) (pad 1 smd roundrect (at -1.55 0 270) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.192308) (net 15 "Net-(R10-Pad1)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder (layer B.Cu) (tedit 5F68FEEE) (tstamp 5FDE9113) (at 102.87 75.92 270) (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (path /5FD8251A) (attr smd) (fp_text reference R9 (at 3.455 0 90) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value 10k (at 0 -1.82 90) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_line (start 2.45 -1.12) (end -2.45 -1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start 2.45 1.12) (end 2.45 -1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.45 1.12) (end 2.45 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.45 -1.12) (end -2.45 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -0.727064 -0.91) (end 0.727064 -0.91) (layer B.SilkS) (width 0.12)) (fp_line (start -0.727064 0.91) (end 0.727064 0.91) (layer B.SilkS) (width 0.12)) (fp_line (start 1.6 -0.8) (end -1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start 1.6 0.8) (end 1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start -1.6 0.8) (end 1.6 0.8) (layer B.Fab) (width 0.1)) (fp_line (start -1.6 -0.8) (end -1.6 0.8) (layer B.Fab) (width 0.1)) (fp_text user %R (at 0 0 90) (layer B.Fab) (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)) ) (pad 2 smd roundrect (at 1.55 0 270) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.192308) (net 2 A)) (pad 1 smd roundrect (at -1.55 0 270) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.192308) (net 14 "Net-(R9-Pad1)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder (layer B.Cu) (tedit 5F68FEEE) (tstamp 5FDE9102) (at 114.3 75.92 90) (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (path /5FD87484) (attr smd) (fp_text reference R8 (at -3.455 0 90) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value 10k (at 0 -1.82 90) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_line (start 2.45 -1.12) (end -2.45 -1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start 2.45 1.12) (end 2.45 -1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.45 1.12) (end 2.45 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.45 -1.12) (end -2.45 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -0.727064 -0.91) (end 0.727064 -0.91) (layer B.SilkS) (width 0.12)) (fp_line (start -0.727064 0.91) (end 0.727064 0.91) (layer B.SilkS) (width 0.12)) (fp_line (start 1.6 -0.8) (end -1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start 1.6 0.8) (end 1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start -1.6 0.8) (end 1.6 0.8) (layer B.Fab) (width 0.1)) (fp_line (start -1.6 -0.8) (end -1.6 0.8) (layer B.Fab) (width 0.1)) (fp_text user %R (at 0 0 90) (layer B.Fab) (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)) ) (pad 2 smd roundrect (at 1.55 0 90) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.192308) (net 11 +3V3)) (pad 1 smd roundrect (at -1.55 0 90) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.192308) (net 3 B)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder (layer B.Cu) (tedit 5F68FEEE) (tstamp 5FDE90F1) (at 100.33 75.92 90) (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (path /5FD87CE9) (attr smd) (fp_text reference R7 (at -3.455 0 90) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value 10k (at 0 -1.82 90) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_line (start 2.45 -1.12) (end -2.45 -1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start 2.45 1.12) (end 2.45 -1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.45 1.12) (end 2.45 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.45 -1.12) (end -2.45 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -0.727064 -0.91) (end 0.727064 -0.91) (layer B.SilkS) (width 0.12)) (fp_line (start -0.727064 0.91) (end 0.727064 0.91) (layer B.SilkS) (width 0.12)) (fp_line (start 1.6 -0.8) (end -1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start 1.6 0.8) (end 1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start -1.6 0.8) (end 1.6 0.8) (layer B.Fab) (width 0.1)) (fp_line (start -1.6 -0.8) (end -1.6 0.8) (layer B.Fab) (width 0.1)) (fp_text user %R (at 0 0 90) (layer B.Fab) (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)) ) (pad 2 smd roundrect (at 1.55 0 90) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.192308) (net 11 +3V3)) (pad 1 smd roundrect (at -1.55 0 90) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.192308) (net 2 A)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder (layer B.Cu) (tedit 5F68FEEE) (tstamp 5FDE90E0) (at 123.19 61.595 90) (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (path /5FE2C6AA) (attr smd) (fp_text reference R6 (at 0 1.82 90) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value 1k (at 0 -1.82 90) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_line (start 2.45 -1.12) (end -2.45 -1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start 2.45 1.12) (end 2.45 -1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.45 1.12) (end 2.45 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.45 -1.12) (end -2.45 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -0.727064 -0.91) (end 0.727064 -0.91) (layer B.SilkS) (width 0.12)) (fp_line (start -0.727064 0.91) (end 0.727064 0.91) (layer B.SilkS) (width 0.12)) (fp_line (start 1.6 -0.8) (end -1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start 1.6 0.8) (end 1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start -1.6 0.8) (end 1.6 0.8) (layer B.Fab) (width 0.1)) (fp_line (start -1.6 -0.8) (end -1.6 0.8) (layer B.Fab) (width 0.1)) (fp_text user %R (at 0 0 90) (layer B.Fab) (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)) ) (pad 2 smd roundrect (at 1.55 0 90) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.192308) (net 5 VCC)) (pad 1 smd roundrect (at -1.55 0 90) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.192308) (net 7 "Net-(D3-Pad2)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder (layer B.Cu) (tedit 5F68FEEE) (tstamp 5FDE90CF) (at 115.57 91.72 90) (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (path /5FDD2972) (attr smd) (fp_text reference R5 (at 0 1.82 90) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value 4.7k (at 0 -1.82 90) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_line (start 2.45 -1.12) (end -2.45 -1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start 2.45 1.12) (end 2.45 -1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.45 1.12) (end 2.45 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.45 -1.12) (end -2.45 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -0.727064 -0.91) (end 0.727064 -0.91) (layer B.SilkS) (width 0.12)) (fp_line (start -0.727064 0.91) (end 0.727064 0.91) (layer B.SilkS) (width 0.12)) (fp_line (start 1.6 -0.8) (end -1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start 1.6 0.8) (end 1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start -1.6 0.8) (end 1.6 0.8) (layer B.Fab) (width 0.1)) (fp_line (start -1.6 -0.8) (end -1.6 0.8) (layer B.Fab) (width 0.1)) (fp_text user %R (at 0 0 90) (layer B.Fab) (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)) ) (pad 2 smd roundrect (at 1.55 0 90) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.192308) (net 5 VCC)) (pad 1 smd roundrect (at -1.55 0 90) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.192308) (net 8 "Net-(Q1-Pad3)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder (layer B.Cu) (tedit 5F68FEEE) (tstamp 5FDE90BE) (at 105.765 93.98) (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (path /5FDCBA49) (attr smd) (fp_text reference R4 (at 4.09 0) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value 47k (at 0 -1.82) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_line (start 2.45 -1.12) (end -2.45 -1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start 2.45 1.12) (end 2.45 -1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.45 1.12) (end 2.45 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.45 -1.12) (end -2.45 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -0.727064 -0.91) (end 0.727064 -0.91) (layer B.SilkS) (width 0.12)) (fp_line (start -0.727064 0.91) (end 0.727064 0.91) (layer B.SilkS) (width 0.12)) (fp_line (start 1.6 -0.8) (end -1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start 1.6 0.8) (end 1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start -1.6 0.8) (end 1.6 0.8) (layer B.Fab) (width 0.1)) (fp_line (start -1.6 -0.8) (end -1.6 0.8) (layer B.Fab) (width 0.1)) (fp_text user %R (at 0 0) (layer B.Fab) (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)) ) (pad 2 smd roundrect (at 1.55 0) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.192308) (net 9 "Net-(Q1-Pad1)")) (pad 1 smd roundrect (at -1.55 0) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.192308) (net 1 GND)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder (layer B.Cu) (tedit 5F68FEEE) (tstamp 5FDE90AD) (at 105.765 96.52 180) (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (path /5FDCA730) (attr smd) (fp_text reference R3 (at -4.09 0) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value 4.7k (at 0 -1.82) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_line (start 2.45 -1.12) (end -2.45 -1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start 2.45 1.12) (end 2.45 -1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.45 1.12) (end 2.45 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.45 -1.12) (end -2.45 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -0.727064 -0.91) (end 0.727064 -0.91) (layer B.SilkS) (width 0.12)) (fp_line (start -0.727064 0.91) (end 0.727064 0.91) (layer B.SilkS) (width 0.12)) (fp_line (start 1.6 -0.8) (end -1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start 1.6 0.8) (end 1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start -1.6 0.8) (end 1.6 0.8) (layer B.Fab) (width 0.1)) (fp_line (start -1.6 -0.8) (end -1.6 0.8) (layer B.Fab) (width 0.1)) (fp_text user %R (at 0 0) (layer B.Fab) (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)) ) (pad 2 smd roundrect (at 1.55 0 180) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.192308) (net 13 LED_PWM)) (pad 1 smd roundrect (at -1.55 0 180) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.192308) (net 9 "Net-(Q1-Pad1)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder (layer B.Cu) (tedit 5F68FEEE) (tstamp 5FDE909C) (at 99.06 94.97 270) (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (path /5FDC3597) (attr smd) (fp_text reference R2 (at 3.455 0 90) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value 4.7k (at 0 -1.82 90) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_line (start 2.45 -1.12) (end -2.45 -1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start 2.45 1.12) (end 2.45 -1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.45 1.12) (end 2.45 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.45 -1.12) (end -2.45 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -0.727064 -0.91) (end 0.727064 -0.91) (layer B.SilkS) (width 0.12)) (fp_line (start -0.727064 0.91) (end 0.727064 0.91) (layer B.SilkS) (width 0.12)) (fp_line (start 1.6 -0.8) (end -1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start 1.6 0.8) (end 1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start -1.6 0.8) (end 1.6 0.8) (layer B.Fab) (width 0.1)) (fp_line (start -1.6 -0.8) (end -1.6 0.8) (layer B.Fab) (width 0.1)) (fp_text user %R (at 0 0 90) (layer B.Fab) (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)) ) (pad 2 smd roundrect (at 1.55 0 270) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.192308) (net 12 SDA)) (pad 1 smd roundrect (at -1.55 0 270) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.192308) (net 11 +3V3)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder (layer B.Cu) (tedit 5F68FEEE) (tstamp 5FDE908B) (at 96.52 94.97 270) (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (path /5FDBC72C) (attr smd) (fp_text reference R1 (at 3.455 0 90) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value 4.7k (at 0 -1.82 90) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_line (start 2.45 -1.12) (end -2.45 -1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start 2.45 1.12) (end 2.45 -1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.45 1.12) (end 2.45 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.45 -1.12) (end -2.45 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -0.727064 -0.91) (end 0.727064 -0.91) (layer B.SilkS) (width 0.12)) (fp_line (start -0.727064 0.91) (end 0.727064 0.91) (layer B.SilkS) (width 0.12)) (fp_line (start 1.6 -0.8) (end -1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start 1.6 0.8) (end 1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start -1.6 0.8) (end 1.6 0.8) (layer B.Fab) (width 0.1)) (fp_line (start -1.6 -0.8) (end -1.6 0.8) (layer B.Fab) (width 0.1)) (fp_text user %R (at 0 0 90) (layer B.Fab) (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)) ) (pad 2 smd roundrect (at 1.55 0 270) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.192308) (net 10 SCL)) (pad 1 smd roundrect (at -1.55 0 270) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.192308) (net 11 +3V3)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Package_TO_SOT_SMD:SOT-23 (layer B.Cu) (tedit 5A02FF57) (tstamp 5FDED6B5) (at 107.68 109.22) (descr "SOT-23, Standard") (tags SOT-23) (path /5FDEE0C8) (attr smd) (fp_text reference Q3 (at 0 2.5) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value MMBT3904 (at 0 -2.5) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_line (start 0.76 -1.58) (end -0.7 -1.58) (layer B.SilkS) (width 0.12)) (fp_line (start 0.76 1.58) (end -1.4 1.58) (layer B.SilkS) (width 0.12)) (fp_line (start -1.7 -1.75) (end -1.7 1.75) (layer B.CrtYd) (width 0.05)) (fp_line (start 1.7 -1.75) (end -1.7 -1.75) (layer B.CrtYd) (width 0.05)) (fp_line (start 1.7 1.75) (end 1.7 -1.75) (layer B.CrtYd) (width 0.05)) (fp_line (start -1.7 1.75) (end 1.7 1.75) (layer B.CrtYd) (width 0.05)) (fp_line (start 0.76 1.58) (end 0.76 0.65) (layer B.SilkS) (width 0.12)) (fp_line (start 0.76 -1.58) (end 0.76 -0.65) (layer B.SilkS) (width 0.12)) (fp_line (start -0.7 -1.52) (end 0.7 -1.52) (layer B.Fab) (width 0.1)) (fp_line (start 0.7 1.52) (end 0.7 -1.52) (layer B.Fab) (width 0.1)) (fp_line (start -0.7 0.95) (end -0.15 1.52) (layer B.Fab) (width 0.1)) (fp_line (start -0.15 1.52) (end 0.7 1.52) (layer B.Fab) (width 0.1)) (fp_line (start -0.7 0.95) (end -0.7 -1.5) (layer B.Fab) (width 0.1)) (fp_text user %R (at 0 0 270) (layer B.Fab) (effects (font (size 0.5 0.5) (thickness 0.075)) (justify mirror)) ) (pad 3 smd rect (at 1 0) (size 0.9 0.8) (layers B.Cu B.Paste B.Mask) (net 43 "Net-(BZ1-Pad2)")) (pad 2 smd rect (at -1 -0.95) (size 0.9 0.8) (layers B.Cu B.Paste B.Mask) (net 1 GND)) (pad 1 smd rect (at -1 0.95) (size 0.9 0.8) (layers B.Cu B.Paste B.Mask) (net 47 "Net-(Q3-Pad1)")) (model ${KISYS3DMOD}/Package_TO_SOT_SMD.3dshapes/SOT-23.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown (layer F.Cu) (tedit 5AC8BA0D) (tstamp 5FDE9065) (at 119.38 95.25) (descr "TO-220-3, Horizontal, RM 2.54mm, see https://www.vishay.com/docs/66542/to-220-1.pdf") (tags "TO-220-3 Horizontal RM 2.54mm") (path /5FDCFA21) (fp_text reference Q2 (at -3.81 -13.97) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value Q_NMOS_GDS (at 2.54 2) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 7.79 -19.71) (end -2.71 -19.71) (layer F.CrtYd) (width 0.05)) (fp_line (start 7.79 1.25) (end 7.79 -19.71) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.71 1.25) (end 7.79 1.25) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.71 -19.71) (end -2.71 1.25) (layer F.CrtYd) (width 0.05)) (fp_line (start 5.08 -3.69) (end 5.08 -1.15) (layer F.SilkS) (width 0.12)) (fp_line (start 2.54 -3.69) (end 2.54 -1.15) (layer F.SilkS) (width 0.12)) (fp_line (start 0 -3.69) (end 0 -1.15) (layer F.SilkS) (width 0.12)) (fp_line (start 7.66 -19.58) (end 7.66 -3.69) (layer F.SilkS) (width 0.12)) (fp_line (start -2.58 -19.58) (end -2.58 -3.69) (layer F.SilkS) (width 0.12)) (fp_line (start -2.58 -19.58) (end 7.66 -19.58) (layer F.SilkS) (width 0.12)) (fp_line (start -2.58 -3.69) (end 7.66 -3.69) (layer F.SilkS) (width 0.12)) (fp_line (start 5.08 -3.81) (end 5.08 0) (layer F.Fab) (width 0.1)) (fp_line (start 2.54 -3.81) (end 2.54 0) (layer F.Fab) (width 0.1)) (fp_line (start 0 -3.81) (end 0 0) (layer F.Fab) (width 0.1)) (fp_line (start 7.54 -3.81) (end -2.46 -3.81) (layer F.Fab) (width 0.1)) (fp_line (start 7.54 -13.06) (end 7.54 -3.81) (layer F.Fab) (width 0.1)) (fp_line (start -2.46 -13.06) (end 7.54 -13.06) (layer F.Fab) (width 0.1)) (fp_line (start -2.46 -3.81) (end -2.46 -13.06) (layer F.Fab) (width 0.1)) (fp_line (start 7.54 -13.06) (end -2.46 -13.06) (layer F.Fab) (width 0.1)) (fp_line (start 7.54 -19.46) (end 7.54 -13.06) (layer F.Fab) (width 0.1)) (fp_line (start -2.46 -19.46) (end 7.54 -19.46) (layer F.Fab) (width 0.1)) (fp_line (start -2.46 -13.06) (end -2.46 -19.46) (layer F.Fab) (width 0.1)) (fp_circle (center 2.54 -16.66) (end 4.39 -16.66) (layer F.Fab) (width 0.1)) (fp_text user %R (at 2.54 -20.58) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 3 thru_hole oval (at 5.08 0) (size 1.905 2) (drill 1.1) (layers *.Cu *.Mask) (net 1 GND)) (pad 2 thru_hole oval (at 2.54 0) (size 1.905 2) (drill 1.1) (layers *.Cu *.Mask) (net 6 "Net-(D2-Pad2)")) (pad 1 thru_hole rect (at 0 0) (size 1.905 2) (drill 1.1) (layers *.Cu *.Mask) (net 8 "Net-(Q1-Pad3)")) (pad "" np_thru_hole oval (at 2.54 -16.66) (size 3.5 3.5) (drill 3.5) (layers *.Cu *.Mask)) (model ${KISYS3DMOD}/Package_TO_SOT_THT.3dshapes/TO-220-3_Horizontal_TabDown.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Package_TO_SOT_SMD:SOT-23 (layer B.Cu) (tedit 5A02FF57) (tstamp 5FDE9045) (at 106.045 90.44 90) (descr "SOT-23, Standard") (tags SOT-23) (path /5FDC928B) (attr smd) (fp_text reference Q1 (at 0 2.5 90) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value MMBT3904 (at 0 -2.5 90) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_line (start 0.76 -1.58) (end -0.7 -1.58) (layer B.SilkS) (width 0.12)) (fp_line (start 0.76 1.58) (end -1.4 1.58) (layer B.SilkS) (width 0.12)) (fp_line (start -1.7 -1.75) (end -1.7 1.75) (layer B.CrtYd) (width 0.05)) (fp_line (start 1.7 -1.75) (end -1.7 -1.75) (layer B.CrtYd) (width 0.05)) (fp_line (start 1.7 1.75) (end 1.7 -1.75) (layer B.CrtYd) (width 0.05)) (fp_line (start -1.7 1.75) (end 1.7 1.75) (layer B.CrtYd) (width 0.05)) (fp_line (start 0.76 1.58) (end 0.76 0.65) (layer B.SilkS) (width 0.12)) (fp_line (start 0.76 -1.58) (end 0.76 -0.65) (layer B.SilkS) (width 0.12)) (fp_line (start -0.7 -1.52) (end 0.7 -1.52) (layer B.Fab) (width 0.1)) (fp_line (start 0.7 1.52) (end 0.7 -1.52) (layer B.Fab) (width 0.1)) (fp_line (start -0.7 0.95) (end -0.15 1.52) (layer B.Fab) (width 0.1)) (fp_line (start -0.15 1.52) (end 0.7 1.52) (layer B.Fab) (width 0.1)) (fp_line (start -0.7 0.95) (end -0.7 -1.5) (layer B.Fab) (width 0.1)) (fp_text user %R (at 0 0 180) (layer B.Fab) (effects (font (size 0.5 0.5) (thickness 0.075)) (justify mirror)) ) (pad 3 smd rect (at 1 0 90) (size 0.9 0.8) (layers B.Cu B.Paste B.Mask) (net 8 "Net-(Q1-Pad3)")) (pad 2 smd rect (at -1 -0.95 90) (size 0.9 0.8) (layers B.Cu B.Paste B.Mask) (net 1 GND)) (pad 1 smd rect (at -1 0.95 90) (size 0.9 0.8) (layers B.Cu B.Paste B.Mask) (net 9 "Net-(Q1-Pad1)")) (model ${KISYS3DMOD}/Package_TO_SOT_SMD.3dshapes/SOT-23.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical (layer F.Cu) (tedit 5A19A420) (tstamp 5FDE9030) (at 90.17 106.045 270) (descr "Through hole straight socket strip, 1x02, 2.54mm pitch, single row (from Kicad 4.0.7), script generated") (tags "Through hole socket strip THT 1x02 2.54mm single row") (path /5FE4960F) (fp_text reference J3 (at 0 -2.77 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value ENCLOSER (at 0 5.31 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -1.8 4.3) (end -1.8 -1.8) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.75 4.3) (end -1.8 4.3) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.75 -1.8) (end 1.75 4.3) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.8 -1.8) (end 1.75 -1.8) (layer F.CrtYd) (width 0.05)) (fp_line (start 0 -1.33) (end 1.33 -1.33) (layer F.SilkS) (width 0.12)) (fp_line (start 1.33 -1.33) (end 1.33 0) (layer F.SilkS) (width 0.12)) (fp_line (start 1.33 1.27) (end 1.33 3.87) (layer F.SilkS) (width 0.12)) (fp_line (start -1.33 3.87) (end 1.33 3.87) (layer F.SilkS) (width 0.12)) (fp_line (start -1.33 1.27) (end -1.33 3.87) (layer F.SilkS) (width 0.12)) (fp_line (start -1.33 1.27) (end 1.33 1.27) (layer F.SilkS) (width 0.12)) (fp_line (start -1.27 3.81) (end -1.27 -1.27) (layer F.Fab) (width 0.1)) (fp_line (start 1.27 3.81) (end -1.27 3.81) (layer F.Fab) (width 0.1)) (fp_line (start 1.27 -0.635) (end 1.27 3.81) (layer F.Fab) (width 0.1)) (fp_line (start 0.635 -1.27) (end 1.27 -0.635) (layer F.Fab) (width 0.1)) (fp_line (start -1.27 -1.27) (end 0.635 -1.27) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 1.27) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 2 thru_hole oval (at 0 2.54 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 1 GND)) (pad 1 thru_hole rect (at 0 0 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 46 "Net-(J3-Pad1)")) (model ${KISYS3DMOD}/Connector_PinSocket_2.54mm.3dshapes/PinSocket_1x02_P2.54mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical (layer F.Cu) (tedit 5A19A420) (tstamp 5FDE901A) (at 120.65 73.025 90) (descr "Through hole straight socket strip, 1x02, 2.54mm pitch, single row (from Kicad 4.0.7), script generated") (tags "Through hole socket strip THT 1x02 2.54mm single row") (path /5FDE8E19) (fp_text reference J2 (at 0 -2.77 180) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value LED (at 0 5.31 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -1.8 4.3) (end -1.8 -1.8) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.75 4.3) (end -1.8 4.3) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.75 -1.8) (end 1.75 4.3) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.8 -1.8) (end 1.75 -1.8) (layer F.CrtYd) (width 0.05)) (fp_line (start 0 -1.33) (end 1.33 -1.33) (layer F.SilkS) (width 0.12)) (fp_line (start 1.33 -1.33) (end 1.33 0) (layer F.SilkS) (width 0.12)) (fp_line (start 1.33 1.27) (end 1.33 3.87) (layer F.SilkS) (width 0.12)) (fp_line (start -1.33 3.87) (end 1.33 3.87) (layer F.SilkS) (width 0.12)) (fp_line (start -1.33 1.27) (end -1.33 3.87) (layer F.SilkS) (width 0.12)) (fp_line (start -1.33 1.27) (end 1.33 1.27) (layer F.SilkS) (width 0.12)) (fp_line (start -1.27 3.81) (end -1.27 -1.27) (layer F.Fab) (width 0.1)) (fp_line (start 1.27 3.81) (end -1.27 3.81) (layer F.Fab) (width 0.1)) (fp_line (start 1.27 -0.635) (end 1.27 3.81) (layer F.Fab) (width 0.1)) (fp_line (start 0.635 -1.27) (end 1.27 -0.635) (layer F.Fab) (width 0.1)) (fp_line (start -1.27 -1.27) (end 0.635 -1.27) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 1.27) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 2 thru_hole oval (at 0 2.54 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 6 "Net-(D2-Pad2)")) (pad 1 thru_hole rect (at 0 0 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 5 VCC)) (model ${KISYS3DMOD}/Connector_PinSocket_2.54mm.3dshapes/PinSocket_1x02_P2.54mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_BarrelJack:BarrelJack_CUI_PJ-102AH_Horizontal (layer F.Cu) (tedit 5A1DBF38) (tstamp 5FDE9004) (at 120.505 52.72 180) (descr "Thin-pin DC Barrel Jack, https://cdn-shop.adafruit.com/datasheets/21mmdcjackDatasheet.pdf") (tags "Power Jack") (path /5FD6CB5A) (fp_text reference J1 (at 6.205 8.27) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value PWR (at -5.5 6.2 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -4.5 10.2) (end 4.5 10.2) (layer F.Fab) (width 0.1)) (fp_line (start -3.5 -0.7) (end 4.5 -0.7) (layer F.Fab) (width 0.1)) (fp_line (start -4.5 0.3) (end -3.5 -0.7) (layer F.Fab) (width 0.1)) (fp_line (start -4.5 13.7) (end -4.5 0.3) (layer F.Fab) (width 0.1)) (fp_line (start 4.5 13.7) (end -4.5 13.7) (layer F.Fab) (width 0.1)) (fp_line (start 4.5 -0.7) (end 4.5 13.7) (layer F.Fab) (width 0.1)) (fp_line (start -4.84 -1.04) (end -3.1 -1.04) (layer F.SilkS) (width 0.12)) (fp_line (start -4.84 0.7) (end -4.84 -1.04) (layer F.SilkS) (width 0.12)) (fp_line (start 4.6 -0.8) (end 4.6 1.2) (layer F.SilkS) (width 0.12)) (fp_line (start 1.8 -0.8) (end 4.6 -0.8) (layer F.SilkS) (width 0.12)) (fp_line (start -4.6 -0.8) (end -1.8 -0.8) (layer F.SilkS) (width 0.12)) (fp_line (start -4.6 13.8) (end -4.6 -0.8) (layer F.SilkS) (width 0.12)) (fp_line (start 4.6 13.8) (end -4.6 13.8) (layer F.SilkS) (width 0.12)) (fp_line (start 4.6 4.8) (end 4.6 13.8) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 -1.8) (end 1.8 -1.8) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.8 -1.2) (end -1.8 -1.8) (layer F.CrtYd) (width 0.05)) (fp_line (start -5 -1.2) (end -1.8 -1.2) (layer F.CrtYd) (width 0.05)) (fp_line (start -5 14.2) (end -5 -1.2) (layer F.CrtYd) (width 0.05)) (fp_line (start 5 14.2) (end -5 14.2) (layer F.CrtYd) (width 0.05)) (fp_line (start 5 4.8) (end 5 14.2) (layer F.CrtYd) (width 0.05)) (fp_line (start 6.5 4.8) (end 5 4.8) (layer F.CrtYd) (width 0.05)) (fp_line (start 6.5 1.2) (end 6.5 4.8) (layer F.CrtYd) (width 0.05)) (fp_line (start 5 1.2) (end 6.5 1.2) (layer F.CrtYd) (width 0.05)) (fp_line (start 5 -1.2) (end 5 1.2) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.8 -1.2) (end 5 -1.2) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.8 -1.8) (end 1.8 -1.2) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 6.5) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 3 thru_hole circle (at 4.7 3 180) (size 2.6 2.6) (drill 1.6) (layers *.Cu *.Mask)) (pad 2 thru_hole circle (at 0 6 180) (size 2.6 2.6) (drill 1.6) (layers *.Cu *.Mask) (net 1 GND)) (pad 1 thru_hole rect (at 0 0 180) (size 2.6 2.6) (drill 1.6) (layers *.Cu *.Mask) (net 5 VCC)) (model ${KISYS3DMOD}/Connector_BarrelJack.3dshapes/BarrelJack_CUI_PJ-102AH_Horizontal.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module LED_THT:LED_D5.0mm (layer F.Cu) (tedit 5995936A) (tstamp 5FDE8FE2) (at 123.19 68.58 90) (descr "LED, diameter 5.0mm, 2 pins, http://cdn-reichelt.de/documents/datenblatt/A500/LL-504BC2E-009.pdf") (tags "LED diameter 5.0mm 2 pins") (path /5FE2601A) (fp_text reference D3 (at 1.27 -4.445 180) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value LED (at 1.27 3.96 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 4.5 -3.25) (end -1.95 -3.25) (layer F.CrtYd) (width 0.05)) (fp_line (start 4.5 3.25) (end 4.5 -3.25) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.95 3.25) (end 4.5 3.25) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.95 -3.25) (end -1.95 3.25) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.29 -1.545) (end -1.29 1.545) (layer F.SilkS) (width 0.12)) (fp_line (start -1.23 -1.469694) (end -1.23 1.469694) (layer F.Fab) (width 0.1)) (fp_circle (center 1.27 0) (end 3.77 0) (layer F.SilkS) (width 0.12)) (fp_circle (center 1.27 0) (end 3.77 0) (layer F.Fab) (width 0.1)) (fp_text user %R (at 1.25 0 90) (layer F.Fab) (effects (font (size 0.8 0.8) (thickness 0.2))) ) (fp_arc (start 1.27 0) (end -1.29 1.54483) (angle -148.9) (layer F.SilkS) (width 0.12)) (fp_arc (start 1.27 0) (end -1.29 -1.54483) (angle 148.9) (layer F.SilkS) (width 0.12)) (fp_arc (start 1.27 0) (end -1.23 -1.469694) (angle 299.1) (layer F.Fab) (width 0.1)) (pad 2 thru_hole circle (at 2.54 0 90) (size 1.8 1.8) (drill 0.9) (layers *.Cu *.Mask) (net 7 "Net-(D3-Pad2)")) (pad 1 thru_hole rect (at 0 0 90) (size 1.8 1.8) (drill 0.9) (layers *.Cu *.Mask) (net 6 "Net-(D2-Pad2)")) (model ${KISYS3DMOD}/LED_THT.3dshapes/LED_D5.0mm.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Diode_SMD:D_SOD-123 (layer B.Cu) (tedit 58645DC7) (tstamp 5FDE8FD0) (at 119 87.63) (descr SOD-123) (tags SOD-123) (path /5FE01503) (attr smd) (fp_text reference D2 (at 0 2) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value 1N4148W (at 0 -2.1) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_line (start -2.25 1) (end 1.65 1) (layer B.SilkS) (width 0.12)) (fp_line (start -2.25 -1) (end 1.65 -1) (layer B.SilkS) (width 0.12)) (fp_line (start -2.35 1.15) (end -2.35 -1.15) (layer B.CrtYd) (width 0.05)) (fp_line (start 2.35 -1.15) (end -2.35 -1.15) (layer B.CrtYd) (width 0.05)) (fp_line (start 2.35 1.15) (end 2.35 -1.15) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.35 1.15) (end 2.35 1.15) (layer B.CrtYd) (width 0.05)) (fp_line (start -1.4 0.9) (end 1.4 0.9) (layer B.Fab) (width 0.1)) (fp_line (start 1.4 0.9) (end 1.4 -0.9) (layer B.Fab) (width 0.1)) (fp_line (start 1.4 -0.9) (end -1.4 -0.9) (layer B.Fab) (width 0.1)) (fp_line (start -1.4 -0.9) (end -1.4 0.9) (layer B.Fab) (width 0.1)) (fp_line (start -0.75 0) (end -0.35 0) (layer B.Fab) (width 0.1)) (fp_line (start -0.35 0) (end -0.35 0.55) (layer B.Fab) (width 0.1)) (fp_line (start -0.35 0) (end -0.35 -0.55) (layer B.Fab) (width 0.1)) (fp_line (start -0.35 0) (end 0.25 0.4) (layer B.Fab) (width 0.1)) (fp_line (start 0.25 0.4) (end 0.25 -0.4) (layer B.Fab) (width 0.1)) (fp_line (start 0.25 -0.4) (end -0.35 0) (layer B.Fab) (width 0.1)) (fp_line (start 0.25 0) (end 0.75 0) (layer B.Fab) (width 0.1)) (fp_line (start -2.25 1) (end -2.25 -1) (layer B.SilkS) (width 0.12)) (fp_text user %R (at 0 2) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (pad 2 smd rect (at 1.65 0) (size 0.9 1.2) (layers B.Cu B.Paste B.Mask) (net 6 "Net-(D2-Pad2)")) (pad 1 smd rect (at -1.65 0) (size 0.9 1.2) (layers B.Cu B.Paste B.Mask) (net 5 VCC)) (model ${KISYS3DMOD}/Diode_SMD.3dshapes/D_SOD-123.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder (layer B.Cu) (tedit 5F68FEEF) (tstamp 5FDE8F9E) (at 90.805 94.9575 90) (descr "Capacitor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (path /5FE45C9B) (attr smd) (fp_text reference C5 (at -3.4675 0 270) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value 100nF (at 0 -1.85 270) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_line (start 2.48 -1.15) (end -2.48 -1.15) (layer B.CrtYd) (width 0.05)) (fp_line (start 2.48 1.15) (end 2.48 -1.15) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.48 1.15) (end 2.48 1.15) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.48 -1.15) (end -2.48 1.15) (layer B.CrtYd) (width 0.05)) (fp_line (start -0.711252 -0.91) (end 0.711252 -0.91) (layer B.SilkS) (width 0.12)) (fp_line (start -0.711252 0.91) (end 0.711252 0.91) (layer B.SilkS) (width 0.12)) (fp_line (start 1.6 -0.8) (end -1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start 1.6 0.8) (end 1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start -1.6 0.8) (end 1.6 0.8) (layer B.Fab) (width 0.1)) (fp_line (start -1.6 -0.8) (end -1.6 0.8) (layer B.Fab) (width 0.1)) (fp_text user %R (at 0 0 270) (layer B.Fab) (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)) ) (pad 2 smd roundrect (at 1.5625 0 90) (size 1.325 1.8) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.188679) (net 1 GND)) (pad 1 smd roundrect (at -1.5625 0 90) (size 1.325 1.8) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.188679) (net 45 ENCLOSER)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_1206_3216Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder (layer B.Cu) (tedit 5F68FEEF) (tstamp 5FDE8F8D) (at 106.68 60.6675 90) (descr "Capacitor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (path /5FD94A30) (attr smd) (fp_text reference C4 (at 0 -1.905 90) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value 100nF (at 0 -1.85 90) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_line (start -1.6 -0.8) (end -1.6 0.8) (layer B.Fab) (width 0.1)) (fp_line (start -1.6 0.8) (end 1.6 0.8) (layer B.Fab) (width 0.1)) (fp_line (start 1.6 0.8) (end 1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start 1.6 -0.8) (end -1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start -0.711252 0.91) (end 0.711252 0.91) (layer B.SilkS) (width 0.12)) (fp_line (start -0.711252 -0.91) (end 0.711252 -0.91) (layer B.SilkS) (width 0.12)) (fp_line (start -2.48 -1.15) (end -2.48 1.15) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.48 1.15) (end 2.48 1.15) (layer B.CrtYd) (width 0.05)) (fp_line (start 2.48 1.15) (end 2.48 -1.15) (layer B.CrtYd) (width 0.05)) (fp_line (start 2.48 -1.15) (end -2.48 -1.15) (layer B.CrtYd) (width 0.05)) (fp_text user %R (at 0 0 90) (layer B.Fab) (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)) ) (pad 1 smd roundrect (at -1.5625 0 90) (size 1.325 1.8) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.188679) (net 4 SW)) (pad 2 smd roundrect (at 1.5625 0 90) (size 1.325 1.8) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.188679) (net 1 GND)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_1206_3216Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder (layer B.Cu) (tedit 5F68FEEF) (tstamp 5FDE8F7C) (at 109.22 75.92 90) (descr "Capacitor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (path /5FD8342E) (attr smd) (fp_text reference C3 (at -3.455 0 90) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value 100nF (at 0 -1.85 90) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_line (start 2.48 -1.15) (end -2.48 -1.15) (layer B.CrtYd) (width 0.05)) (fp_line (start 2.48 1.15) (end 2.48 -1.15) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.48 1.15) (end 2.48 1.15) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.48 -1.15) (end -2.48 1.15) (layer B.CrtYd) (width 0.05)) (fp_line (start -0.711252 -0.91) (end 0.711252 -0.91) (layer B.SilkS) (width 0.12)) (fp_line (start -0.711252 0.91) (end 0.711252 0.91) (layer B.SilkS) (width 0.12)) (fp_line (start 1.6 -0.8) (end -1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start 1.6 0.8) (end 1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start -1.6 0.8) (end 1.6 0.8) (layer B.Fab) (width 0.1)) (fp_line (start -1.6 -0.8) (end -1.6 0.8) (layer B.Fab) (width 0.1)) (fp_text user %R (at 0 0 90) (layer B.Fab) (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)) ) (pad 2 smd roundrect (at 1.5625 0 90) (size 1.325 1.8) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.188679) (net 1 GND)) (pad 1 smd roundrect (at -1.5625 0 90) (size 1.325 1.8) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.188679) (net 3 B)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_1206_3216Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder (layer B.Cu) (tedit 5F68FEEF) (tstamp 5FDE9A35) (at 105.41 75.92 90) (descr "Capacitor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (path /5FD837D4) (attr smd) (fp_text reference C2 (at -3.455 0 90) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value 100nF (at 0 -1.85 90) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_line (start 2.48 -1.15) (end -2.48 -1.15) (layer B.CrtYd) (width 0.05)) (fp_line (start 2.48 1.15) (end 2.48 -1.15) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.48 1.15) (end 2.48 1.15) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.48 -1.15) (end -2.48 1.15) (layer B.CrtYd) (width 0.05)) (fp_line (start -0.711252 -0.91) (end 0.711252 -0.91) (layer B.SilkS) (width 0.12)) (fp_line (start -0.711252 0.91) (end 0.711252 0.91) (layer B.SilkS) (width 0.12)) (fp_line (start 1.6 -0.8) (end -1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start 1.6 0.8) (end 1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start -1.6 0.8) (end 1.6 0.8) (layer B.Fab) (width 0.1)) (fp_line (start -1.6 -0.8) (end -1.6 0.8) (layer B.Fab) (width 0.1)) (fp_text user %R (at 0 0 90) (layer B.Fab) (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)) ) (pad 2 smd roundrect (at 1.5625 0 90) (size 1.325 1.8) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.188679) (net 1 GND)) (pad 1 smd roundrect (at -1.5625 0 90) (size 1.325 1.8) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.188679) (net 2 A)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_1206_3216Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder (layer B.Cu) (tedit 5F68FEEF) (tstamp 5FDE8F5A) (at 123.825 49.8225 90) (descr "Capacitor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (path /5FD6D39D) (attr smd) (fp_text reference C1 (at 0 1.85 90) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value 10uF (at 0 -1.85 90) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_line (start 2.48 -1.15) (end -2.48 -1.15) (layer B.CrtYd) (width 0.05)) (fp_line (start 2.48 1.15) (end 2.48 -1.15) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.48 1.15) (end 2.48 1.15) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.48 -1.15) (end -2.48 1.15) (layer B.CrtYd) (width 0.05)) (fp_line (start -0.711252 -0.91) (end 0.711252 -0.91) (layer B.SilkS) (width 0.12)) (fp_line (start -0.711252 0.91) (end 0.711252 0.91) (layer B.SilkS) (width 0.12)) (fp_line (start 1.6 -0.8) (end -1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start 1.6 0.8) (end 1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start -1.6 0.8) (end 1.6 0.8) (layer B.Fab) (width 0.1)) (fp_line (start -1.6 -0.8) (end -1.6 0.8) (layer B.Fab) (width 0.1)) (fp_text user %R (at 0 0 90) (layer B.Fab) (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)) ) (pad 2 smd roundrect (at 1.5625 0 90) (size 1.325 1.8) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.188679) (net 1 GND)) (pad 1 smd roundrect (at -1.5625 0 90) (size 1.325 1.8) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.188679) (net 5 VCC)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_1206_3216Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (gr_text MaoTimer (at 74.295 95.885) (layer B.SilkS) (effects (font (size 3 3) (thickness 0.6) italic) (justify mirror)) ) (gr_text "maobuff@gmail.com\n20/12/20" (at 84.455 62.23) (layer B.SilkS) (effects (font (size 2 2) (thickness 0.3)) (justify mirror)) ) (dimension 74.93 (width 0.15) (layer Eco2.User) (gr_text "74.930 mm" (at 90.805 35.53) (layer Eco2.User) (effects (font (size 1 1) (thickness 0.15))) ) (feature1 (pts (xy 128.27 39.37) (xy 128.27 36.243579))) (feature2 (pts (xy 53.34 39.37) (xy 53.34 36.243579))) (crossbar (pts (xy 53.34 36.83) (xy 128.27 36.83))) (arrow1a (pts (xy 128.27 36.83) (xy 127.143496 37.416421))) (arrow1b (pts (xy 128.27 36.83) (xy 127.143496 36.243579))) (arrow2a (pts (xy 53.34 36.83) (xy 54.466504 37.416421))) (arrow2b (pts (xy 53.34 36.83) (xy 54.466504 36.243579))) ) (dimension 74.93 (width 0.15) (layer Eco2.User) (gr_text "74.930 mm" (at 132.11 76.835 270) (layer Eco2.User) (effects (font (size 1 1) (thickness 0.15))) ) (feature1 (pts (xy 128.27 114.3) (xy 131.396421 114.3))) (feature2 (pts (xy 128.27 39.37) (xy 131.396421 39.37))) (crossbar (pts (xy 130.81 39.37) (xy 130.81 114.3))) (arrow1a (pts (xy 130.81 114.3) (xy 130.223579 113.173496))) (arrow1b (pts (xy 130.81 114.3) (xy 131.396421 113.173496))) (arrow2a (pts (xy 130.81 39.37) (xy 130.223579 40.496504))) (arrow2b (pts (xy 130.81 39.37) (xy 131.396421 40.496504))) ) (gr_text "maobuff@gmail.com\n20/12/20" (at 84.455 62.23) (layer B.Cu) (effects (font (size 2 2) (thickness 0.3)) (justify mirror)) ) (gr_text MaoTimer (at 74.295 95.885) (layer B.Cu) (effects (font (size 3 3) (thickness 0.6) italic) (justify mirror)) ) (gr_line (start 128.27 39.37) (end 53.34 39.37) (layer Edge.Cuts) (width 0.5) (tstamp 5FDEE8D6)) (gr_line (start 128.27 114.3) (end 128.27 39.37) (layer Edge.Cuts) (width 0.5)) (gr_line (start 53.34 114.3) (end 128.27 114.3) (layer Edge.Cuts) (width 0.5)) (gr_line (start 53.34 39.37) (end 53.34 114.3) (layer Edge.Cuts) (width 0.5)) (segment (start 107.275 67.905) (end 104.775 65.405) (width 1) (layer B.Cu) (net 1)) (segment (start 107.275 69.85) (end 107.275 67.905) (width 1) (layer B.Cu) (net 1)) (segment (start 104.775 65.405) (end 104.775 57.785) (width 1) (layer B.Cu) (net 1)) (segment (start 105.41 74.3575) (end 105.41 72.39) (width 1) (layer B.Cu) (net 1)) (segment (start 109.22 72.39) (end 109.22 74.3575) (width 1) (layer B.Cu) (net 1)) (segment (start 107.275 72.35) (end 107.315 72.39) (width 1) (layer B.Cu) (net 1)) (segment (start 107.275 69.85) (end 107.275 72.35) (width 1) (layer B.Cu) (net 1)) (segment (start 107.315 72.39) (end 109.22 72.39) (width 1) (layer B.Cu) (net 1)) (segment (start 105.41 72.39) (end 107.315 72.39) (width 1) (layer B.Cu) (net 1)) (segment (start 66.04 88.9) (end 66.04 85.725) (width 1) (layer B.Cu) (net 1)) (segment (start 104.14 107.39) (end 104.14 105.41) (width 1) (layer B.Cu) (net 1) (tstamp 5FDED5B5)) (segment (start 104.14 105.41) (end 106.68 105.41) (width 1) (layer B.Cu) (net 1)) (segment (start 106.68 105.41) (end 106.68 108.27) (width 1) (layer B.Cu) (net 1) (tstamp 5FDED5B8)) (segment (start 104.215 93.98) (end 102.235 93.98) (width 1) (layer B.Cu) (net 1)) (segment (start 102.235 93.98) (end 102.235 91.44) (width 1) (layer B.Cu) (net 1)) (segment (start 102.235 91.44) (end 105.095 91.44) (width 1) (layer B.Cu) (net 1)) (segment (start 104.775 57.15) (end 104.775 55.35) (width 1) (layer B.Cu) (net 1)) (segment (start 104.775 57.785) (end 104.775 57.15) (width 1) (layer B.Cu) (net 1)) (segment (start 104.775 57.15) (end 106.68 57.15) (width 1) (layer B.Cu) (net 1)) (segment (start 106.68 57.15) (end 106.68 59.105) (width 1) (layer B.Cu) (net 1)) (segment (start 120.505 46.72) (end 123.555 46.72) (width 1) (layer B.Cu) (net 1)) (segment (start 123.825 46.99) (end 123.825 48.26) (width 1) (layer B.Cu) (net 1)) (segment (start 123.555 46.72) (end 123.825 46.99) (width 1) (layer B.Cu) (net 1)) (segment (start 106.68 105.41) (end 109.22 105.41) (width 1) (layer B.Cu) (net 1)) (segment (start 109.22 105.41) (end 109.22 100.965) (width 1) (layer B.Cu) (net 1)) (segment (start 90.805 91.44) (end 90.805 93.395) (width 1) (layer B.Cu) (net 1)) (segment (start 66.04 88.9) (end 66.04 91.44) (width 1) (layer B.Cu) (net 1)) (segment (start 120.505 46.72) (end 104.41 46.72) (width 1) (layer B.Cu) (net 1)) (segment (start 101.6 49.53) (end 101.6 57.15) (width 1) (layer B.Cu) (net 1)) (segment (start 104.41 46.72) (end 101.6 49.53) (width 1) (layer B.Cu) (net 1)) (segment (start 101.6 57.15) (end 104.775 57.15) (width 1) (layer B.Cu) (net 1)) (segment (start 77.47 57.15) (end 101.6 57.15) (width 1) (layer B.Cu) (net 1)) (segment (start 102.235 91.44) (end 102.235 88.265) (width 1) (layer B.Cu) (net 1)) (segment (start 102.235 88.265) (end 95.885 88.265) (width 1) (layer B.Cu) (net 1)) (via (at 95.885 88.9) (size 2) (drill 1) (layers F.Cu B.Cu) (net 1)) (segment (start 95.885 88.265) (end 95.885 88.9) (width 1) (layer B.Cu) (net 1)) (via (at 87.63 93.345) (size 2) (drill 1) (layers F.Cu B.Cu) (net 1)) (segment (start 87.63 93.345) (end 87.63 91.44) (width 1) (layer B.Cu) (net 1)) (segment (start 87.63 91.44) (end 90.805 91.44) (width 1) (layer B.Cu) (net 1)) (segment (start 66.04 91.44) (end 87.63 91.44) (width 1) (layer B.Cu) (net 1)) (segment (start 89.535 93.345) (end 87.63 93.345) (width 1) (layer F.Cu) (net 1)) (segment (start 93.98 88.9) (end 89.535 93.345) (width 1) (layer F.Cu) (net 1)) (segment (start 95.885 88.9) (end 93.98 88.9) (width 1) (layer F.Cu) (net 1)) (segment (start 124.46 97.79) (end 124.46 95.25) (width 1) (layer B.Cu) (net 1)) (segment (start 114.3 97.79) (end 124.46 97.79) (width 1) (layer B.Cu) (net 1)) (segment (start 114.3 105.41) (end 114.3 97.79) (width 1) (layer B.Cu) (net 1)) (segment (start 84.455 106.045) (end 84.455 109.08999) (width 1) (layer B.Cu) (net 1)) (segment (start 87.63 106.045) (end 84.455 106.045) (width 1) (layer B.Cu) (net 1)) (segment (start 87.13001 109.08999) (end 87.63 108.59) (width 1) (layer B.Cu) (net 1)) (via (at 87.63 108.59) (size 2) (drill 1) (layers F.Cu B.Cu) (net 1)) (segment (start 84.455 109.08999) (end 87.13001 109.08999) (width 1) (layer B.Cu) (net 1)) (via (at 111.125 107.315) (size 2) (drill 1) (layers F.Cu B.Cu) (net 1)) (segment (start 109.85 108.59) (end 111.125 107.315) (width 1) (layer F.Cu) (net 1)) (segment (start 87.63 108.59) (end 109.85 108.59) (width 1) (layer F.Cu) (net 1)) (segment (start 111.125 107.315) (end 111.125 105.41) (width 1) (layer B.Cu) (net 1)) (segment (start 111.125 105.41) (end 114.3 105.41) (width 1) (layer B.Cu) (net 1)) (segment (start 109.22 105.41) (end 111.125 105.41) (width 1) (layer B.Cu) (net 1)) (segment (start 60.325 91.44) (end 66.04 91.44) (width 1) (layer B.Cu) (net 1)) (segment (start 60.325 106.045) (end 60.325 91.44) (width 1) (layer B.Cu) (net 1)) (segment (start 84.455 106.045) (end 60.325 106.045) (width 1) (layer B.Cu) (net 1)) (segment (start 67.945 57.15) (end 77.47 57.15) (width 1) (layer B.Cu) (net 1)) (segment (start 67.945 67.31) (end 67.945 57.15) (width 1) (layer B.Cu) (net 1)) (segment (start 77.47 67.31) (end 67.945 67.31) (width 1) (layer B.Cu) (net 1)) (segment (start 77.47 70.485) (end 77.47 67.31) (width 1) (layer B.Cu) (net 1)) (segment (start 66.04 81.915) (end 77.47 70.485) (width 1) (layer B.Cu) (net 1)) (segment (start 66.04 85.725) (end 66.04 81.915) (width 1) (layer B.Cu) (net 1)) (segment (start 77.43 57.11) (end 77.47 57.15) (width 1) (layer B.Cu) (net 1)) (segment (start 77.43 47.76) (end 77.43 57.11) (width 1) (layer B.Cu) (net 1)) (segment (start 102.87 77.47) (end 102.87 79.375) (width 1) (layer B.Cu) (net 2)) (segment (start 102.87 79.375) (end 105.41 79.375) (width 1) (layer B.Cu) (net 2)) (segment (start 105.41 79.375) (end 105.41 77.4825) (width 1) (layer B.Cu) (net 2)) (segment (start 102.87 79.375) (end 100.33 79.375) (width 1) (layer B.Cu) (net 2)) (segment (start 100.33 79.375) (end 100.33 77.47) (width 1) (layer B.Cu) (net 2)) (segment (start 93.98 83.782544) (end 93.98 85.725) (width 1) (layer B.Cu) (net 2)) (segment (start 98.387544 79.375) (end 93.98 83.782544) (width 1) (layer B.Cu) (net 2)) (segment (start 100.33 79.375) (end 98.387544 79.375) (width 1) (layer B.Cu) (net 2)) (segment (start 109.22 77.4825) (end 109.22 79.375) (width 1) (layer B.Cu) (net 3)) (segment (start 111.76 77.47) (end 111.76 79.375) (width 1) (layer B.Cu) (net 3)) (segment (start 111.76 79.375) (end 109.22 79.375) (width 1) (layer B.Cu) (net 3)) (segment (start 111.76 79.375) (end 114.3 79.375) (width 1) (layer B.Cu) (net 3)) (segment (start 114.3 79.375) (end 114.3 77.47) (width 1) (layer B.Cu) (net 3)) (segment (start 96.52 83.82) (end 96.52 85.725) (width 1) (layer B.Cu) (net 3)) (segment (start 99.19001 81.14999) (end 96.52 83.82) (width 1) (layer B.Cu) (net 3)) (segment (start 107.44501 81.14999) (end 99.19001 81.14999) (width 1) (layer B.Cu) (net 3)) (segment (start 109.22 79.375) (end 107.44501 81.14999) (width 1) (layer B.Cu) (net 3)) (segment (start 99.06 83.82) (end 99.06 85.725) (width 1) (layer B.Cu) (net 4)) (segment (start 99.695 83.185) (end 99.06 83.82) (width 1) (layer B.Cu) (net 4)) (segment (start 116.84 83.185) (end 99.695 83.185) (width 1) (layer B.Cu) (net 4)) (segment (start 116.84 66.04) (end 116.84 83.185) (width 1) (layer B.Cu) (net 4)) (segment (start 116.205 65.405) (end 116.84 66.04) (width 1) (layer B.Cu) (net 4)) (segment (start 114.3 67.03) (end 114.3 65.405) (width 1) (layer B.Cu) (net 4)) (segment (start 114.3 65.405) (end 116.205 65.405) (width 1) (layer B.Cu) (net 4)) (segment (start 106.68 64.135) (end 109.22 64.135) (width 1) (layer B.Cu) (net 4)) (segment (start 110.49 65.405) (end 114.3 65.405) (width 1) (layer B.Cu) (net 4)) (segment (start 109.22 64.135) (end 110.49 65.405) (width 1) (layer B.Cu) (net 4)) (segment (start 106.68 62.23) (end 106.68 64.135) (width 1) (layer B.Cu) (net 4)) (segment (start 109.22 62.23) (end 109.22 64.135) (width 1) (layer B.Cu) (net 4)) (segment (start 120.505 52.72) (end 123.81 52.72) (width 1) (layer B.Cu) (net 5)) (segment (start 117.35 87.63) (end 115.57 87.63) (width 1) (layer B.Cu) (net 5)) (segment (start 115.57 87.63) (end 115.57 90.17) (width 1) (layer B.Cu) (net 5)) (segment (start 118.745 73.025) (end 120.65 73.025) (width 1) (layer B.Cu) (net 5)) (segment (start 115.57 85.09) (end 118.745 85.09) (width 1) (layer B.Cu) (net 5)) (segment (start 115.57 87.63) (end 115.57 85.09) (width 1) (layer B.Cu) (net 5)) (segment (start 118.745 69.85) (end 118.745 73.025) (width 1) (layer B.Cu) (net 5)) (segment (start 118.745 54.48) (end 120.505 52.72) (width 1) (layer B.Cu) (net 5)) (segment (start 125.095 99.695) (end 125.095 101.04) (width 1) (layer B.Cu) (net 5)) (segment (start 117.475 99.695) (end 125.095 99.695) (width 1) (layer B.Cu) (net 5)) (segment (start 117.475 100.965) (end 117.475 99.695) (width 1) (layer B.Cu) (net 5)) (via (at 125.095 85.09) (size 2) (drill 1) (layers F.Cu B.Cu) (net 5)) (segment (start 127 86.995) (end 125.095 85.09) (width 1) (layer B.Cu) (net 5)) (segment (start 127 97.79) (end 127 86.995) (width 1) (layer B.Cu) (net 5)) (via (at 121.211497 82.476497) (size 2) (drill 1) (layers F.Cu B.Cu) (net 5)) (segment (start 123.825 85.09) (end 121.211497 82.476497) (width 1) (layer F.Cu) (net 5)) (segment (start 125.095 85.09) (end 123.825 85.09) (width 1) (layer F.Cu) (net 5)) (segment (start 118.818503 82.476497) (end 118.745 82.55) (width 1) (layer B.Cu) (net 5)) (segment (start 121.211497 82.476497) (end 118.818503 82.476497) (width 1) (layer B.Cu) (net 5)) (segment (start 118.745 82.55) (end 118.745 73.025) (width 1) (layer B.Cu) (net 5)) (segment (start 118.745 85.09) (end 118.745 82.55) (width 1) (layer B.Cu) (net 5)) (segment (start 106.68 100.965) (end 106.68 99.695) (width 1) (layer B.Cu) (net 5)) (via (at 109.855 98.425) (size 2) (drill 1) (layers F.Cu B.Cu) (net 5)) (segment (start 107.95 98.425) (end 109.855 98.425) (width 1) (layer B.Cu) (net 5)) (segment (start 106.68 99.695) (end 107.95 98.425) (width 1) (layer B.Cu) (net 5)) (via (at 126.365 98.425) (size 2) (drill 1) (layers F.Cu B.Cu) (net 5)) (segment (start 109.855 98.425) (end 126.365 98.425) (width 1) (layer F.Cu) (net 5)) (segment (start 126.365 98.425) (end 127 97.79) (width 1) (layer B.Cu) (net 5)) (segment (start 125.095 99.695) (end 126.365 98.425) (width 1) (layer B.Cu) (net 5)) (via (at 70.485 52.705) (size 2) (drill 1) (layers F.Cu B.Cu) (net 5)) (segment (start 118.745 57.785) (end 118.745 54.48) (width 1) (layer B.Cu) (net 5)) (segment (start 118.745 69.85) (end 118.745 57.785) (width 1) (layer B.Cu) (net 5)) (segment (start 123.19 57.785) (end 118.745 57.785) (width 1) (layer B.Cu) (net 5)) (segment (start 123.19 60.045) (end 123.19 57.785) (width 1) (layer B.Cu) (net 5)) (segment (start 123.825 52.705) (end 123.81 52.72) (width 1) (layer B.Cu) (net 5)) (segment (start 123.825 51.385) (end 123.825 52.705) (width 1) (layer B.Cu) (net 5)) (via (at 81.28 52.705) (size 2) (drill 1) (layers F.Cu B.Cu) (net 5)) (segment (start 71.899213 52.705) (end 81.28 52.705) (width 1) (layer F.Cu) (net 5)) (segment (start 70.485 52.705) (end 71.899213 52.705) (width 1) (layer F.Cu) (net 5)) (segment (start 123.81 52.72) (end 125.73 50.8) (width 1) (layer B.Cu) (net 5)) (segment (start 125.73 42.545) (end 91.44 42.545) (width 1) (layer B.Cu) (net 5)) (segment (start 125.73 50.8) (end 125.73 42.545) (width 1) (layer B.Cu) (net 5)) (segment (start 91.44 42.545) (end 81.28 52.705) (width 1) (layer B.Cu) (net 5)) (segment (start 70.484992 52.704992) (end 70.485 52.705) (width 1) (layer B.Cu) (net 5)) (segment (start 65.405008 52.704992) (end 70.484992 52.704992) (width 1) (layer B.Cu) (net 5)) (segment (start 59.055 59.055) (end 65.405008 52.704992) (width 1) (layer B.Cu) (net 5)) (segment (start 59.055 81.28) (end 59.055 59.055) (width 1) (layer B.Cu) (net 5)) (segment (start 63.5 85.725) (end 59.055 81.28) (width 1) (layer B.Cu) (net 5)) (segment (start 120.65 87.63) (end 121.92 87.63) (width 1) (layer B.Cu) (net 6)) (segment (start 121.92 87.63) (end 121.92 95.25) (width 1) (layer B.Cu) (net 6)) (segment (start 121.92 84.455) (end 121.92 87.63) (width 1) (layer B.Cu) (net 6)) (segment (start 125.095 81.28) (end 121.92 84.455) (width 1) (layer B.Cu) (net 6)) (segment (start 125.095 73.025) (end 125.095 81.28) (width 1) (layer B.Cu) (net 6)) (segment (start 123.19 73.025) (end 125.095 73.025) (width 1) (layer B.Cu) (net 6)) (segment (start 125.095 73.025) (end 125.095 68.58) (width 1) (layer B.Cu) (net 6)) (segment (start 125.095 68.58) (end 123.19 68.58) (width 1) (layer B.Cu) (net 6)) (segment (start 123.19 66.04) (end 123.19 63.145) (width 1) (layer B.Cu) (net 7)) (segment (start 115.57 93.27) (end 115.57 95.25) (width 1) (layer B.Cu) (net 8)) (segment (start 115.57 95.25) (end 119.38 95.25) (width 1) (layer B.Cu) (net 8)) (segment (start 113.03 95.25) (end 115.57 95.25) (width 1) (layer B.Cu) (net 8)) (segment (start 113.03 88.265) (end 113.03 95.25) (width 1) (layer B.Cu) (net 8)) (segment (start 106.045 88.265) (end 113.03 88.265) (width 1) (layer B.Cu) (net 8)) (segment (start 106.045 89.44) (end 106.045 88.265) (width 1) (layer B.Cu) (net 8)) (segment (start 109.22 91.44) (end 106.995 91.44) (width 1) (layer B.Cu) (net 9)) (segment (start 107.315 96.52) (end 109.22 96.52) (width 1) (layer B.Cu) (net 9)) (segment (start 107.315 93.98) (end 109.22 93.98) (width 1) (layer B.Cu) (net 9)) (segment (start 109.22 93.98) (end 109.22 91.44) (width 1) (layer B.Cu) (net 9)) (segment (start 109.22 96.52) (end 109.22 93.98) (width 1) (layer B.Cu) (net 9)) (segment (start 80.01 47.72) (end 79.97 47.76) (width 1) (layer B.Cu) (net 10)) (segment (start 80.01 43.815) (end 80.01 47.72) (width 1) (layer B.Cu) (net 10)) (segment (start 57.15 110.49) (end 57.15 43.815) (width 1) (layer B.Cu) (net 10)) (segment (start 96.52 110.49) (end 57.15 110.49) (width 1) (layer B.Cu) (net 10)) (segment (start 57.15 43.815) (end 80.01 43.815) (width 1) (layer B.Cu) (net 10)) (segment (start 96.52 100.965) (end 96.52 110.49) (width 1) (layer B.Cu) (net 10)) (segment (start 96.52 100.965) (end 96.52 96.52) (width 1) (layer B.Cu) (net 10)) (segment (start 93.98 93.42) (end 93.98 91.44) (width 1) (layer B.Cu) (net 11)) (segment (start 99.06 91.44) (end 99.06 93.42) (width 1) (layer B.Cu) (net 11)) (segment (start 96.52 93.42) (end 96.52 91.44) (width 1) (layer B.Cu) (net 11)) (segment (start 96.52 91.44) (end 99.06 91.44) (width 1) (layer B.Cu) (net 11)) (segment (start 93.98 91.44) (end 96.52 91.44) (width 1) (layer B.Cu) (net 11)) (segment (start 93.98 91.44) (end 93.98 89.535) (width 1) (layer B.Cu) (net 11)) (segment (start 93.98 89.535) (end 68.58 89.535) (width 1) (layer B.Cu) (net 11)) (segment (start 68.58 89.535) (end 68.58 85.725) (width 1) (layer B.Cu) (net 11)) (via (at 114.3 72.39) (size 2) (drill 1) (layers F.Cu B.Cu) (net 11)) (segment (start 114.3 70.13) (end 114.3 72.39) (width 1) (layer B.Cu) (net 11)) (segment (start 114.3 72.39) (end 114.3 74.37) (width 1) (layer B.Cu) (net 11)) (via (at 100.33 72.39) (size 2) (drill 1) (layers F.Cu B.Cu) (net 11)) (segment (start 114.3 72.39) (end 100.33 72.39) (width 1) (layer F.Cu) (net 11)) (segment (start 100.33 72.39) (end 100.33 74.37) (width 1) (layer B.Cu) (net 11)) (via (at 74.89 69.89) (size 2) (drill 1) (layers F.Cu B.Cu) (net 11)) (via (at 80.01 69.85) (size 2) (drill 1) (layers F.Cu B.Cu) (net 11)) (segment (start 79.97 69.89) (end 80.01 69.85) (width 1) (layer F.Cu) (net 11)) (segment (start 74.89 69.89) (end 79.97 69.89) (width 1) (layer F.Cu) (net 11)) (segment (start 78.74 72.39) (end 80.01 72.39) (width 1) (layer B.Cu) (net 11)) (segment (start 68.58 82.55) (end 78.74 72.39) (width 1) (layer B.Cu) (net 11)) (segment (start 68.58 85.725) (end 68.58 82.55) (width 1) (layer B.Cu) (net 11)) (segment (start 80.01 72.39) (end 100.33 72.39) (width 1) (layer B.Cu) (net 11)) (segment (start 80.01 69.85) (end 80.01 72.39) (width 1) (layer B.Cu) (net 11)) (segment (start 111.76 100.965) (end 111.76 95.885) (width 1) (layer B.Cu) (net 11)) (via (at 111.125 90.17) (size 2) (drill 1) (layers F.Cu B.Cu) (net 11)) (segment (start 111.125 95.25) (end 111.125 90.17) (width 1) (layer B.Cu) (net 11)) (segment (start 111.76 95.885) (end 111.125 95.25) (width 1) (layer B.Cu) (net 11)) (via (at 100.33 90.17) (size 2) (drill 1) (layers F.Cu B.Cu) (net 11)) (segment (start 111.125 90.17) (end 100.33 90.17) (width 1) (layer F.Cu) (net 11)) (segment (start 100.33 90.17) (end 99.06 91.44) (width 1) (layer B.Cu) (net 11)) (segment (start 75.560001 48.430001) (end 74.89 47.76) (width 1) (layer B.Cu) (net 11)) (segment (start 71.12 55.245) (end 75.560001 50.804999) (width 1) (layer B.Cu) (net 11)) (segment (start 66.04 55.245) (end 71.12 55.245) (width 1) (layer B.Cu) (net 11)) (segment (start 66.04 69.89) (end 66.04 55.245) (width 1) (layer B.Cu) (net 11)) (segment (start 75.560001 50.804999) (end 75.560001 48.430001) (width 1) (layer B.Cu) (net 11)) (segment (start 74.89 69.89) (end 66.04 69.89) (width 1) (layer B.Cu) (net 11)) (segment (start 82.55 41.91) (end 82.55 47.72) (width 1) (layer B.Cu) (net 12)) (segment (start 55.245 41.91) (end 82.55 41.91) (width 1) (layer B.Cu) (net 12)) (segment (start 55.245 112.395) (end 55.245 41.91) (width 1) (layer B.Cu) (net 12)) (segment (start 82.55 47.72) (end 82.51 47.76) (width 1) (layer B.Cu) (net 12)) (segment (start 99.06 112.395) (end 55.245 112.395) (width 1) (layer B.Cu) (net 12)) (segment (start 99.06 100.965) (end 99.06 112.395) (width 1) (layer B.Cu) (net 12)) (segment (start 99.06 96.52) (end 99.06 100.965) (width 1) (layer B.Cu) (net 12)) (segment (start 104.14 100.965) (end 104.14 99.06) (width 1) (layer B.Cu) (net 13)) (segment (start 104.14 99.06) (end 102.87 99.06) (width 1) (layer B.Cu) (net 13)) (segment (start 102.87 99.06) (end 102.235 98.425) (width 1) (layer B.Cu) (net 13)) (segment (start 102.235 98.425) (end 102.235 96.52) (width 1) (layer B.Cu) (net 13)) (segment (start 102.235 96.52) (end 104.215 96.52) (width 1) (layer B.Cu) (net 13)) (segment (start 102.87 71.755) (end 104.775 69.85) (width 1) (layer B.Cu) (net 14)) (segment (start 102.87 74.37) (end 102.87 71.755) (width 1) (layer B.Cu) (net 14)) (segment (start 111.76 71.835) (end 109.775 69.85) (width 1) (layer B.Cu) (net 15)) (segment (start 111.76 74.37) (end 111.76 73.74) (width 1) (layer B.Cu) (net 15)) (segment (start 111.76 71.835) (end 111.76 73.74) (width 1) (layer B.Cu) (net 15)) (segment (start 109.22 55.905) (end 109.775 55.35) (width 1) (layer B.Cu) (net 16)) (segment (start 109.22 59.13) (end 109.22 55.905) (width 1) (layer B.Cu) (net 16)) (segment (start 117.475 106.66) (end 117.495 106.68) (width 1) (layer B.Cu) (net 43)) (segment (start 117.475 104.265) (end 117.475 106.66) (width 1) (layer B.Cu) (net 43)) (segment (start 114.955 109.22) (end 117.495 106.68) (width 1) (layer B.Cu) (net 43)) (segment (start 108.68 109.22) (end 114.955 109.22) (width 1) (layer B.Cu) (net 43)) (segment (start 125.095 104.14) (end 125.095 106.68) (width 1) (layer B.Cu) (net 44)) (segment (start 93.98 100.965) (end 93.98 103.58) (width 1) (layer B.Cu) (net 45)) (segment (start 90.805 96.52) (end 90.805 98.425) (width 1) (layer B.Cu) (net 45)) (segment (start 90.805 98.425) (end 93.98 98.425) (width 1) (layer B.Cu) (net 45)) (segment (start 93.98 98.425) (end 93.98 96.52) (width 1) (layer B.Cu) (net 45)) (segment (start 93.98 100.965) (end 93.98 98.425) (width 1) (layer B.Cu) (net 45)) (segment (start 93.98 106.68) (end 93.98 108.585) (width 1) (layer B.Cu) (net 46)) (segment (start 93.98 108.585) (end 90.17 108.585) (width 1) (layer B.Cu) (net 46)) (segment (start 90.17 108.585) (end 90.17 106.045) (width 1) (layer B.Cu) (net 46)) (segment (start 101.6 110.49) (end 101.6 112.395) (width 1) (layer B.Cu) (net 47) (tstamp 5FDED705)) (segment (start 106.68 112.395) (end 106.68 110.17) (width 1) (layer B.Cu) (net 47) (tstamp 5FDED5BB)) (segment (start 104.14 110.49) (end 104.14 112.395) (width 1) (layer B.Cu) (net 47) (tstamp 5FDED70B)) (segment (start 104.14 112.395) (end 106.68 112.395) (width 1) (layer B.Cu) (net 47) (tstamp 5FDED70E)) (segment (start 101.6 112.395) (end 104.14 112.395) (width 1) (layer B.Cu) (net 47) (tstamp 5FDED708)) (segment (start 101.6 107.39) (end 101.6 105.41) (width 1) (layer B.Cu) (net 48) (tstamp 5FDED5B2)) (segment (start 101.6 105.41) (end 101.6 100.965) (width 1) (layer B.Cu) (net 48)) )