TITLE Dry Stone PROMPT Set the work area over a faint survey of the hill and mark the maximum bearing line. Build a drystone wall exercise as a mason’s outdoor workbench. Use sand #e1d0aa, slate #413c35 and olive #77672f exactly. Set a narrow upright Georgia heading in the workbench cheek and use an operating-system monospace for the cutting marks and status. Render the stones as irregular outlined Canvas polygons with hatched faces and size the board at high DPI. Let the visitor pick a stock stone, position it directly over the wall, then place it by tapping or pressing Enter after positioning with arrow keys. Estimate bearing from the underside’s contact against the tops of seated stones and settle the stone if its center is supported. When the bearing fails, let the rock pause, slowly yaw and accelerate out of the wall. In reduced motion, report the failure and return the stone immediately. Provide three distinct stones, an undo lever and a six-stone challenge. Write a mason’s short introduction about carrying weight through overlapping joints, with status that helps aim the next attempt. DESCRIPTION A hands-on wall section teaches bearing by letting an irregular stone lose its footing. VISUAL TECHNIQUES High-DPI Canvas elevation, pointwise polygon contact, hatching, gravity, outlined stock selectors. INTERACTION MODEL Choose a profile and aim with the pointer or arrow keys. Tap or press Enter to seat it. Undo removes the last seated stone.