PORTNAME= e2fsprogs PORTVERSION= 1.47.0 PORTREVISION?= 0 CATEGORIES?= sysutils MASTER_SITES= KERNEL_ORG/linux/kernel/people/tytso/${PORTNAME}/v${PORTVERSION} MAINTAINER?= ports@MidnightBSD.org COMMENT?= Utilities & library to manipulate ext2/3/4 filesystems WWW= https://e2fsprogs.sourceforge.net/ LICENSE?= gpl2+ .if !defined(_no_license_file) LICENSE_FILE?= ${WRKSRC}/NOTICE .endif LICENSE_DISTFILES_gpl2+ = ${DISTNAME}${EXTRACT_SUFX} USES= cpe gmake makeinfo pkgconfig tar:xz CPE_VENDOR= e2fsprogs_project USE_CSTD= gnu99 # this seems a bit redundant to the --rpath below, but # the latter should be more robust in case someone needs # to deal with the file systems from a system not yet fully booted. .if !defined(PKGNAMESUFFIX) USE_LDCONFIG= ${PREFIX}/lib/e2fsprogs .endif GNU_CONFIGURE= yes # while we use the system blkid, we need to --enable-libblkid # so that the tools get built: CONFIGURE_ARGS?=--disable-fsck \ --disable-e2initrd-helper \ --disable-libuuid \ --disable-uuidd \ --enable-libblkid \ --enable-elf-shlibs \ --libdir='${PREFIX}/lib/e2fsprogs/' \ --includedir='${PREFIX}/include/e2fsprogs/' \ --with-root-prefix='${PREFIX}' \ LDFLAGS='${LDFLAGS} -L${LOCALBASE}/lib -Wl,--rpath -Wl,${LOCALBASE}/lib/e2fsprogs' CONFIGURE_ENV?= LIBS='-Wl,--as-needed ${LIBS} -lexecinfo -lelf' # apparently HAVE_PTHREAD_H checks go missing if the FUSEFS option is unset, force it: CPPFLAGS+= -I${WRKSRC}/lib -I${LOCALBASE}/include # -D_EXT2_USE_C_VERSIONS CFLAGS+= -Wno-unused-command-line-argument MAKE_ARGS+= pkgconfigdir='${PREFIX}/libdata/pkgconfig' MAKE_ENV+= CHECK_CMD=@true PORTSCOUT= ignore:1 # cannot handle the version in the directory .if !defined(MASTERDIR) CPPFLAGS+= -D__GNUC_PREREQ\(a,b\)=1 INSTALL_TARGET= install install-libs OPTIONS_DEFINE= DOCS NLS FUSEFS PARALLELTESTS SLOWTESTS BASHTESTS LIBUNWIND OPTIONS_EXCLUDE+= EXAMPLES OPTIONS_SUB= yes OPTIONS_SINGLE= SELFTEST OPTIONS_SINGLE_SELFTEST= NOTESTS SMALLTESTS ALLTESTS OPTIONS_DEFAULT= SMALLTESTS FUSEFS_DESC= Build user-land ext2/3/4 FUSE module (slow!) SELFTEST_DESC= Choose which set of self-tests to run NOTESTS_DESC= Do not run any self-tests (Tier-1, DISCOURAGED) SMALLTESTS_DESC=Run tests that need <500 MB disk space (DEFAULT) ALLTESTS_DESC= Run most self-tests (needs more RAM/disk space) PARALLELTESTS_DESC= Parallelize self-tests (needs more disk space) SLOWTESTS_DESC= Enable slow tests that are skipped by default BASHTESTS_DESC= Enable tests that require the GNU bash shell LIBUNWIND_DESC= Backtrace with libunwind (do set WITH_DEBUG_PORTS+=${PKGORIGIN}!) FUSEFS_CONFIGURE_ENABLE= fuse2fs FUSEFS_USES= fuse NLS_USES= gettext iconv:build BASHTESTS_BUILD_DEPENDS= ${BASH_CMD}:shells/bash BASH_CMD= ${LOCALBASE}/bin/bash LIB_DEPENDS+= libblkid.so:misc/e2fsprogs-libblkid LIB_DEPENDS+= libuuid.so:misc/e2fsprogs-libuuid LIBUNWIND_LIB_DEPENDS= libunwind.so:devel/libunwind LIBUNWIND_LIBS+= -L${LOCALBASE}/lib -lunwind LIBUNWIND_LDFLAGS+= -rdynamic LIBUNWIND_EXTRA_PATCHES=${FILESDIR}/extrapatch-e2fsck_sigcatcher.c PORTDOCS= NOTICE README RELEASE-NOTES SUBMITTING-PATCHES .endif # even under DEVELOPER, no REINPLACE_CMD warnings desired # it simply makes no sense to warn about dozens of files # for systematic edits that run over files that don't need the edits. # a "warn if nothing was edited by one command" would be acceptable, # but until we have that in the framework, just # avoid Tools/scripts/sed_checked altogether: REINPLACE_CMD= ${SED} ${REINPLACE_ARGS} PKGDEINSTALL= ${PKGINSTALL} MAKE_ARGS+= V=1 .include .if ${MASTERDIR} == ${.CURDIR} PKGNAMESUFFIX= -core .endif .if empty(PORT_OPTIONS:MNOTESTS) && ${MASTERDIR} == ${.CURDIR} USES+= perl5 USE_PERL5= build .endif .include .if ${PORT_OPTIONS:MNLS} . if empty(ICONV_LIB) libintl= ${LOCALBASE}/lib/libintl.a . else libintl= ${LOCALBASE}/lib/libintl.a ${LOCALBASE}/lib/libiconv.a . endif .else CONFIGURE_ARGS+=--disable-nls libintl= .endif .if ${MASTERDIR} == ${.CURDIR} && (${ARCH} == "aarch64" || ${ARCH} == "riscv64") EXTRA_PATCHES+= ${FILESDIR}/extrapatch-no-sbrk .endif post-patch:: .if !empty(DISTFILES) @${REINPLACE_CMD} -e 's///' ${WRKSRC}/*/*.c @${REINPLACE_CMD} -e 's,/etc/blkid.tab,${ETCDIR}/blkid.tab,' ${WRKSRC}/misc/blkid* ${WRKSRC}/lib/blkid/blkidP.h @${REINPLACE_CMD} -E -e 's/__GNUC_PREREQ\>/__GNUC_PREREQ__/' ${WRKSRC}/*/*/*.[ch] ${WRKSRC}/*/*.c . if empty(PORT_OPTIONS:MALLTESTS) . for i in \ d_fallocate_blkmap \ f_baddir \ f_bbfile \ f_convert_bmap \ f_detect_junk \ f_inode_ea_collision \ f_lpffile \ f_no_cache_corrupt_inode \ f_opt_extent \ j_corrupt_descr_csum \ m_bigjournal \ m_hugefile_slack \ m_offset \ m_raid_opt \ r_32to64bit \ r_32to64bit_expand_full \ r_32to64bit_meta \ r_32to64bit_move_itable \ r_64to32bit \ r_64to32bit_meta \ r_expand_full \ r_min_itable \ t_change_uuid_mounted \ t_dangerous \ t_disable_changed_csum_seed_mounted \ t_disable_mcsum \ t_disable_mcsum_noinitbg \ t_disable_mcsum_yesinitbg \ t_enable_mcsum \ t_enable_mcsum_initbg \ t_iexpand_full \ t_iexpand_mcsum \ t_uninit_bg_rm \ u_dryrun \ u_mke2fs_opt_offset @${MV} ${WRKSRC}/tests/${i} ${WRKSRC}/tests/disabled_test-${i} . endfor . endif . if ${PORT_OPTIONS:MBASHTESTS} ${REINPLACE_CMD} -e 's}^SHELL *=.*}SHELL = ${_CHECK_SHELL}}' ${WRKSRC}/MCONFIG.in . else . for i in f_large_dir @${MV} ${WRKSRC}/tests/${i} ${WRKSRC}/tests/disabled_test-${i} . endfor . endif .endif ############################################################## # Master port stuff that is not to be seen by the slave ports. ############################################################## .if ${MASTERDIR} == ${.CURDIR} # NOTE: The previous .if block goes all the way to the end of the file. pre-build: # fix up Makefile ordering for parallel builds cd ${WRKSRC}/lib/et && ${DO_MAKE_BUILD} compile_et cd ${WRKSRC}/lib/ss && _ET_DIR_OVERRIDE=../et ../et/compile_et ss_err.et \ && ${REINPLACE_CMD} -f ${FILESDIR}/fix-ss_err.h.sed ss_err.h cd ${WRKSRC}/lib/support && ${DO_MAKE_BUILD} prof_err.h .if ${PORT_OPTIONS:MPARALLELTESTS} _CHECK_JOBS=${_MAKE_JOBS} .else _CHECK_JOBS= .endif _checkaddargs= .if ${PORT_OPTIONS:MBASHTESTS} _CHECK_SHELL=${LOCALBASE}/bin/bash _checkaddargs+=--eval SHELL:=${BASH_CMD} .else _CHECK_SHELL=${SH} .endif .if !defined(TMPDIR) _checkaddargs+=TMPDIR=${WRKDIR}/tmp .endif .if ${PORT_OPTIONS:MSLOWTESTS} _check_target=SKIP_SLOW_TESTS= check _check_timeout=7200 .else _check_target=check _check_timeout=180 .endif .if ${PORT_OPTIONS:MLIBUNWIND} _staticlibs+=${LOCALBASE}/lib/libunwind.a /usr/lib/liblzma.a /usr/lib/libmd.a .endif post-build: # Relink e2fsck statically - We need to make sure that tools for the root file # system are statically linked against anything that is outside the root fs, # else we're in trouble if e2fsck is needed for boot: # (we don't use e2fsck.static, since we can link libc.so dynamically) # NOTE: we need to link libgcc statically, it might be under /usr/local! # => do not add a -Bdynamic - but instead list the dynamic libraries # before the -Bstatic cd ${WRKSRC}/e2fsck && ${RM} -f e2fsck \ && ${MAKE_CMD} e2fsck V=1 \ LIBS="-static-libgcc -lc -Bstatic ../lib/libsupport.a ../lib/libext2fs.a ../lib/libcom_err.a \ ${_staticlibs} /usr/lib/libexecinfo.a /usr/lib/libelf.a \ ${LOCALBASE}/lib/libblkid.a ${LOCALBASE}/lib/libuuid.a ${libintl} ../lib/libe2p.a " \ && ${STRIP_CMD} e2fsck # Regression check: avoid a port (not upstream!) regression from 1.40.5, # check that e2fsck isn't dynalinked against anything but libc.so: @${ECHO_CMD} -n "===> checking that e2fsck depends on no shared objects outside /lib: " @a="$$(ldd ${WRKSRC}/e2fsck/e2fsck 2>/dev/null \ | ${GREP} -v 'not a dynamic executable' \ | ${GREP} '=>' \ | ${AWK} '{print $$3;}' \ | ${EGREP} -v '^/lib/lib.*\.so\.' || :)"; \ if test "x$$a" = "x" ; then echo 'PASS' ; else \ echo 'FAIL' ; echo '===> e2fsck depends on:' ; echo "$$a" ; exit 1 ; fi # Update translation binary files .if ${PORT_OPTIONS:MNLS} cd ${WRKSRC}/po && ${MAKE_CMD} update-gmo .endif # Build fsck(8) wrapper ${CC} ${CPPFLAGS} ${CFLAGS} ${LDFLAGS} -s ${LIBS} \ -o ${WRKSRC}/fsck_ext2fs ${FILESDIR}/fsck_ext2fs.c # While the ${MAKE} check can take a minute on an end user's system, the # correctness of tools such as e2fsck is critical to the health of the # file systems. The upstream is not using any *BSD as his development # system, and therefore let's exercise due diligence in running the self- # test on each and every system and not just package building hosts. # There have been subtle failures induced by Linux-isms in the past. # -- Matthias Andree, package maintainer, 2007-09-18 .if empty(PORT_OPTIONS:MNOTESTS) @${ECHO_CMD} '===> Running e2fsprogs self-test suite' # do not add -j options unconditionally to ${MAKE_CMD} below, this might break # due to excessive disk space use. cd ${WRKSRC}/tests && \ ulimit -t ${_check_timeout} && \ ${MKDIR} ${WRKDIR}/tmp && \ ${SETENV} e2fsprogs_inhibit_SIGINFO=1 BLKID_FILE=${WRKDIR}/tmp/blkid.tab SHELL=${_CHECK_SHELL} \ ${MAKE_CMD} ${_check_target} ${_CHECK_JOBS} ${_checkaddargs} \ || { head -n30000 ${WRKSRC}/tests/*.failed 2>/dev/null ; exit 1 ; } .else @${ECHO_CMD} '===> SKIPPING e2fsprogs self-test suite (DISCOURAGED!)' .endif post-install: ${INSTALL_PROGRAM} ${WRKSRC}/fsck_ext2fs ${STAGEDIR}${PREFIX}/sbin/ ${LN} -fs e2fsck ${STAGEDIR}${PREFIX}/sbin/fsck.ext2 ${LN} -fs e2fsck ${STAGEDIR}${PREFIX}/sbin/fsck.ext3 ${LN} -fs e2fsck ${STAGEDIR}${PREFIX}/sbin/fsck.ext4 # now the remainder of the usual post-install jobs: ${INSTALL_MAN} ${FILESDIR}/fsck_ext2fs.8 ${STAGEDIR}${PREFIX}/man/man8/ .if ${PORT_OPTIONS:MDOCS} ${MKDIR} ${STAGEDIR}${DOCSDIR} .for i in ${PORTDOCS} ${INSTALL_DATA} ${WRKSRC}/${i} ${STAGEDIR}${DOCSDIR} .endfor .endif # remove or relocate files installed by other ports already, or shadowing system files: cd ${STAGEDIR}${PREFIX} && \ ${XARGS} <${FILESDIR}/unwanted ${RM} && \ ${RMDIR} include/e2fsprogs/blkid ${MV} ${STAGEDIR}${PREFIX}/bin/compile_et ${STAGEDIR}${PREFIX}/bin/e2fsprogs-compile_et ${MV} ${STAGEDIR}${MANPREFIX}/man/man1/compile_et.1 ${STAGEDIR}${MANPREFIX}/man/man1/e2fsprogs-compile_et.1 ${MKDIR} ${STAGEDIR}${DATADIR}/et/ ${MV} ${STAGEDIR}${PREFIX}/share/et/* ${STAGEDIR}${DATADIR}/et/ ${REINPLACE_CMD} -e 's}^DIR=.*$$}DIR=${TRUE_PREFIX}/${DATADIR_REL}/et}' -i '' ${STAGEDIR}${PREFIX}/bin/e2fsprogs-compile_et ${RMDIR} ${STAGEDIR}${PREFIX}/share/et ${MV} -f ${STAGEDIR}${MANPREFIX}/man/man3/com_err.3 \ ${STAGEDIR}${MANPREFIX}/man/man3/e2fsprogs-com_err.3 # # the next line closes .if ${MASTERDIR} == ${.CURDIR} .endif .include