! _ExternalInterface-variable.idf ! ! ! Highlights: Demonstrates using the external interface with an ExternalInterface:Variable to ! control a window blind. ! ! Basic file description: This file is derived from EMSWindowShadeControl.idf ! 1 story building divided into 3 interior conditioned zones. Roof with no plenum. ! No ground contact with floor. ! ! Simulation Location/Run: CHICAGO_IL_USA TMY2-94846, 2 design days ! Run Control executes 2 design days ! ! Location: Chicago, IL ! ! Design Days: CHICAGO_IL_USA Annual Heating 99% Design Conditions DB, MaxDB= -17.3°C ! CHICAGO_IL_USA Annual Cooling 1% Design Conditions, MaxDB= 31.5°C MCWB= 23.0°C ! ! Run Period (Weather File): none ! ! Run Control: No zone or system sizing, design day simulation. ! ! Building: Single floor rectangular L-shaped building 40 ft south wall, 40 ft west wall, zone height 10 feet. ! There is a single window in West Zone's south wall. The walls are 1 in stucco over 4 in common brick ! and gypboard. The roof is a built up roof with 1/2 in stone over 3/8 in felt over 1 in dense insulation ! supported by 2 in heavy weight concrete. The window is single pane 3mm clear. ! The window to wall ratio is approximately 0.07. ! ! The building is oriented due north. ! ! Floor Area: 130.1 m2 (1403 ft2) ! Number of Stories: 1 ! ! Zone Description Details: ! ! (0,12.192,0) (9.144,12.192,0) ! ________________________________ ! | | ! | | ! | | ! | | ! | North | ! | | ! | | ! | (6.096,6.096,0) | ! |________________________________|____________ (12.192,6.069,0) ! | (0,6.096,0) | (9.144,6.096,0) | ! | | | ! | | | ! | | | ! | West | East | window = * ! | | | ! | | | ! | | | ! |___**************___|________________________| ! ! (0,0,0) (6.069,0,0) (12.192,0,0) ! ! Internal gains description: ZONE West - lighting is 0 watts, equip is 2928.751 watts, 3 occupants ! Internal gains description: ZONE North - lighting is 878.6252 watts, equip is 2928.751 watts, 4 occupants ! Internal gains description: ZONE East - lighting is 1464.375 watts, equip is 1464.375 watts, 3 occupants ! ! Interzone Surfaces: 3 interzone surfaces (see diagram) ! Internal Mass: None ! People: 10 ! Lights: 2343 W ! Equipment: 7323 W ! Windows: 1 ! Window has an interior blind with fixed-angle slats. The blind is deployed ! when incident beam plus diffuse solar on window exceeds 20 W/m^2. ! Detached Shading: None ! Daylight: None ! Natural Ventilation: None ! Compact Schedules: Yes ! Solair Distribution: FullInteriorAndExterior ! ! HVAC: purchased air serves all 3 zones ! ! Zonal Equipment: PURCHASED AIR ! Central Air Handling Equipment: No ! System Equipment Autosize: No ! Purchased Cooling: Yes ! Purchased Heating: Yes ! Purchased Chilled Water: No ! Purchased Hot Water: No ! Coils: None ! Pumps: None ! Boilers: None ! Chillers: None ! Towers: None ! ! Results: ! Standard Reports: All Summary Predefined Reports ! Timestep or Hourly Variables: TimeStep ! Time bins Report: None ! HTML Report: Predefined All Summary ! Environmental Emissions: None ! Utility Tariffs: None Version,9.3; Timestep,6; Building, NONE, !- Name 0.0000000E+00, !- North Axis {deg} Suburbs, !- Terrain 3.9999999E-02, !- Loads Convergence Tolerance Value {W} 0.4000000, !- Temperature Convergence Tolerance Value {deltaC} FullInteriorAndExterior, !- Solar Distribution 25, !- Maximum Number of Warmup Days 6; !- Minimum Number of Warmup Days HeatBalanceAlgorithm,ConductionTransferFunction; SurfaceConvectionAlgorithm:Inside,TARP; SurfaceConvectionAlgorithm:Outside,DOE-2; SimulationControl, No, !- Do Zone Sizing Calculation No, !- Do System Sizing Calculation No, !- Do Plant Sizing Calculation Yes, !- Run Simulation for Sizing Periods Yes; !- Run Simulation for Weather File Run Periods RunPeriod, Run Period 1, !- Name 3, !- Begin Month 1, !- Begin Day of Month , !- Begin Year 3, !- End Month 4, !- End Day of Month , !- End Year Tuesday, !- Day of Week for Start Day Yes, !- Use Weather File Holidays and Special Days Yes, !- Use Weather File Daylight Saving Period No, !- Apply Weekend Holiday Rule Yes, !- Use Weather File Rain Indicators Yes; !- Use Weather File Snow Indicators Site:Location, CHICAGO_IL_USA TMY2-94846, !- Name 41.78, !- Latitude {deg} -87.75, !- Longitude {deg} -6.00, !- Time Zone {hr} 190.00; !- Elevation {m} ! CHICAGO_IL_USA Annual Heating 99% Design Conditions DB, MaxDB= -17.3°C SizingPeriod:DesignDay, CHICAGO_IL_USA Annual Heating 99% Design Conditions DB, !- Name 1, !- Month 21, !- Day of Month WinterDesignDay, !- Day Type -17.3, !- Maximum Dry-Bulb Temperature {C} 0.0, !- Daily Dry-Bulb Temperature Range {deltaC} , !- Dry-Bulb Temperature Range Modifier Type , !- Dry-Bulb Temperature Range Modifier Day Schedule Name Wetbulb, !- Humidity Condition Type -17.3, !- Wetbulb or DewPoint at Maximum Dry-Bulb {C} , !- Humidity Condition Day Schedule Name , !- Humidity Ratio at Maximum Dry-Bulb {kgWater/kgDryAir} , !- Enthalpy at Maximum Dry-Bulb {J/kg} , !- Daily Wet-Bulb Temperature Range {deltaC} 99063., !- Barometric Pressure {Pa} 4.9, !- Wind Speed {m/s} 270, !- Wind Direction {deg} No, !- Rain Indicator No, !- Snow Indicator No, !- Daylight Saving Time Indicator ASHRAEClearSky, !- Solar Model Indicator , !- Beam Solar Day Schedule Name , !- Diffuse Solar Day Schedule Name , !- ASHRAE Clear Sky Optical Depth for Beam Irradiance (taub) {dimensionless} , !- ASHRAE Clear Sky Optical Depth for Diffuse Irradiance (taud) {dimensionless} 0.0; !- Sky Clearness ! CHICAGO_IL_USA Annual Cooling 1% Design Conditions, MaxDB= 31.5°C MCWB= 23.0°C SizingPeriod:DesignDay, CHICAGO_IL_USA Annual Cooling 1% Design Conditions DB/MCWB, !- Name 7, !- Month 21, !- Day of Month SummerDesignDay, !- Day Type 31.5, !- Maximum Dry-Bulb Temperature {C} 10.7, !- Daily Dry-Bulb Temperature Range {deltaC} , !- Dry-Bulb Temperature Range Modifier Type , !- Dry-Bulb Temperature Range Modifier Day Schedule Name Wetbulb, !- Humidity Condition Type 23.0, !- Wetbulb or DewPoint at Maximum Dry-Bulb {C} , !- Humidity Condition Day Schedule Name , !- Humidity Ratio at Maximum Dry-Bulb {kgWater/kgDryAir} , !- Enthalpy at Maximum Dry-Bulb {J/kg} , !- Daily Wet-Bulb Temperature Range {deltaC} 99063., !- Barometric Pressure {Pa} 5.3, !- Wind Speed {m/s} 230, !- Wind Direction {deg} No, !- Rain Indicator No, !- Snow Indicator No, !- Daylight Saving Time Indicator ASHRAEClearSky, !- Solar Model Indicator , !- Beam Solar Day Schedule Name , !- Diffuse Solar Day Schedule Name , !- ASHRAE Clear Sky Optical Depth for Beam Irradiance (taub) {dimensionless} , !- ASHRAE Clear Sky Optical Depth for Diffuse Irradiance (taud) {dimensionless} 1.0; !- Sky Clearness Material, A1 - 1 IN STUCCO, !- Name Smooth, !- Roughness 2.5389841E-02, !- Thickness {m} 0.6918309, !- Conductivity {W/m-K} 1858.142, !- Density {kg/m3} 836.8000, !- Specific Heat {J/kg-K} 0.9000000, !- Thermal Absorptance 0.9200000, !- Solar Absorptance 0.9200000; !- Visible Absorptance Material, C4 - 4 IN COMMON BRICK, !- Name Rough, !- Roughness 0.1014984, !- Thickness {m} 0.7264224, !- Conductivity {W/m-K} 1922.216, !- Density {kg/m3} 836.8000, !- Specific Heat {J/kg-K} 0.9000000, !- Thermal Absorptance 0.7600000, !- Solar Absorptance 0.7600000; !- Visible Absorptance Material, E1 - 3 / 4 IN PLASTER OR GYP BOARD, !- Name Smooth, !- Roughness 1.9050000E-02, !- Thickness {m} 0.7264224, !- Conductivity {W/m-K} 1601.846, !- Density {kg/m3} 836.8000, !- Specific Heat {J/kg-K} 0.9000000, !- Thermal Absorptance 0.9200000, !- Solar Absorptance 0.9200000; !- Visible Absorptance Material, C6 - 8 IN CLAY TILE, !- Name Smooth, !- Roughness 0.2033016, !- Thickness {m} 0.5707605, !- Conductivity {W/m-K} 1121.292, !- Density {kg/m3} 836.8000, !- Specific Heat {J/kg-K} 0.9000000, !- Thermal Absorptance 0.8200000, !- Solar Absorptance 0.8200000; !- Visible Absorptance Material, C10 - 8 IN HW CONCRETE, !- Name MediumRough, !- Roughness 0.2033016, !- Thickness {m} 1.729577, !- Conductivity {W/m-K} 2242.585, !- Density {kg/m3} 836.8000, !- Specific Heat {J/kg-K} 0.9000000, !- Thermal Absorptance 0.6500000, !- Solar Absorptance 0.6500000; !- Visible Absorptance Material, E2 - 1 / 2 IN SLAG OR STONE, !- Name Rough, !- Roughness 1.2710161E-02, !- Thickness {m} 1.435549, !- Conductivity {W/m-K} 881.0155, !- Density {kg/m3} 1673.600, !- Specific Heat {J/kg-K} 0.9000000, !- Thermal Absorptance 0.5500000, !- Solar Absorptance 0.5500000; !- Visible Absorptance Material, E3 - 3 / 8 IN FELT AND MEMBRANE, !- Name Rough, !- Roughness 9.5402403E-03, !- Thickness {m} 0.1902535, !- Conductivity {W/m-K} 1121.292, !- Density {kg/m3} 1673.600, !- Specific Heat {J/kg-K} 0.9000000, !- Thermal Absorptance 0.7500000, !- Solar Absorptance 0.7500000; !- Visible Absorptance Material, B5 - 1 IN DENSE INSULATION, !- Name VeryRough, !- Roughness 2.5389841E-02, !- Thickness {m} 4.3239430E-02, !- Conductivity {W/m-K} 91.30524, !- Density {kg/m3} 836.8000, !- Specific Heat {J/kg-K} 0.9000000, !- Thermal Absorptance 0.5000000, !- Solar Absorptance 0.5000000; !- Visible Absorptance Material, C12 - 2 IN HW CONCRETE, !- Name MediumRough, !- Roughness 5.0901599E-02, !- Thickness {m} 1.729577, !- Conductivity {W/m-K} 2242.585, !- Density {kg/m3} 836.8000, !- Specific Heat {J/kg-K} 0.9000000, !- Thermal Absorptance 0.6500000, !- Solar Absorptance 0.6500000; !- Visible Absorptance WindowMaterial:Glazing, SINGLEPANE, !- Name SpectralAverage, !- Optical Data Type , !- Window Glass Spectral Data Set Name 0.003, !- Thickness {m} 0.90, !- Solar Transmittance at Normal Incidence 0.031, !- Front Side Solar Reflectance at Normal Incidence 0.031, !- Back Side Solar Reflectance at Normal Incidence 0.90, !- Visible Transmittance at Normal Incidence 0.05, !- Front Side Visible Reflectance at Normal Incidence 0.05, !- Back Side Visible Reflectance at Normal Incidence 0.0, !- Infrared Transmittance at Normal Incidence 0.84, !- Front Side Infrared Hemispherical Emissivity 0.84, !- Back Side Infrared Hemispherical Emissivity 0.9; !- Conductivity {W/m-K} WindowMaterial:Blind, BLIND, !- Name HORIZONTAL, !- Slat Orientation 0.025, !- Slat Width {m} 0.01875, !- Slat Separation {m} 0.001, !- Slat Thickness {m} 45.0, !- Slat Angle {deg} 0.1, !- Slat Conductivity {W/m-K} 0.0, !- Slat Beam Solar Transmittance 0.7, !- Front Side Slat Beam Solar Reflectance 0.7, !- Back Side Slat Beam Solar Reflectance 0.0, !- Slat Diffuse Solar Transmittance 0.7, !- Front Side Slat Diffuse Solar Reflectance 0.7, !- Back Side Slat Diffuse Solar Reflectance 0.0, !- Slat Beam Visible Transmittance 0.5, !- Front Side Slat Beam Visible Reflectance 0.5, !- Back Side Slat Beam Visible Reflectance 0.0, !- Slat Diffuse Visible Transmittance 0.5, !- Front Side Slat Diffuse Visible Reflectance 0.5, !- Back Side Slat Diffuse Visible Reflectance 0.0, !- Slat Infrared Hemispherical Transmittance 0.9, !- Front Side Slat Infrared Hemispherical Emissivity 0.9, !- Back Side Slat Infrared Hemispherical Emissivity 0.050, !- Blind to Glass Distance {m} 0.5, !- Blind Top Opening Multiplier 0.5, !- Blind Bottom Opening Multiplier 0.0, !- Blind Left Side Opening Multiplier 0.0, !- Blind Right Side Opening Multiplier 0, !- Minimum Slat Angle {deg} 180; !- Maximum Slat Angle {deg} Construction, EXTWALL80, !- Name A1 - 1 IN STUCCO, !- Outside Layer C4 - 4 IN COMMON BRICK, !- Layer 2 E1 - 3 / 4 IN PLASTER OR GYP BOARD; !- Layer 3 Construction, PARTITION06, !- Name E1 - 3 / 4 IN PLASTER OR GYP BOARD, !- Outside Layer C6 - 8 IN CLAY TILE, !- Layer 2 E1 - 3 / 4 IN PLASTER OR GYP BOARD; !- Layer 3 Construction, FLOOR SLAB 8 IN, !- Name C10 - 8 IN HW CONCRETE; !- Outside Layer Construction, ROOF34, !- Name E2 - 1 / 2 IN SLAG OR STONE, !- Outside Layer E3 - 3 / 8 IN FELT AND MEMBRANE, !- Layer 2 B5 - 1 IN DENSE INSULATION, !- Layer 3 C12 - 2 IN HW CONCRETE; !- Layer 4 Construction, WIN-CON-SINGLEPANE, !- Name SINGLEPANE; !- Outside Layer Construction, WIN-CON-SINGLEPANE WITH INTERIOR BLIND, !- Name SINGLEPANE, !- Outside Layer BLIND; !- Layer 2 WindowShadingControl, INCIDENT SOLAR ON BLIND-West Zone, !- Name West Zone, !- Zone Name 1, !- Shading Control Sequence Number InteriorBlind, !- Shading Type WIN-CON-SINGLEPANE WITH INTERIOR BLIND, !- Construction with Shading Name OnIfHighSolarOnWindow, !- Shading Control Type , !- Schedule Name 20, !- Setpoint {W/m2, W or deg C} NO, !- Shading Control Is Scheduled NO, !- Glare Control Is Active , !- Shading Device Material Name FixedSlatAngle, !- Type of Slat Angle Control for Blinds , !- Slat Angle Schedule Name , !- Setpoint 2 {W/m2 or deg C} , !- Daylighting Control Object Name Sequential, !- Multiple Surface Control Type Zn001:Wall001:Win001; !- Fenestration Surface 1 Name ScheduleTypeLimits, Any Number; !- Name ScheduleTypeLimits, Fraction, !- Name 0.0, !- Lower Limit Value 1.0, !- Upper Limit Value CONTINUOUS; !- Numeric Type ScheduleTypeLimits, Temperature, !- Name -60, !- Lower Limit Value 200, !- Upper Limit Value CONTINUOUS; !- Numeric Type ScheduleTypeLimits, Control Type, !- Name 0, !- Lower Limit Value 4, !- Upper Limit Value DISCRETE; !- Numeric Type Schedule:Compact, Activity Sch, !- Name Any Number, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Alldays, !- Field 2 Until: 24:00,131.80; !- Field 3 Schedule:Compact, Work Eff Sch, !- Name Any Number, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Alldays, !- Field 2 Until: 24:00,0.00; !- Field 3 Schedule:Compact, Clothing Sch, !- Name Any Number, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Alldays, !- Field 2 Until: 24:00,1.00; !- Field 3 Schedule:Compact, Air Velo Sch, !- Name Any Number, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Alldays, !- Field 2 Until: 24:00,0.137; !- Field 3 Schedule:Compact, Office Occupancy, !- Name ANY NUMBER, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays SummerDesignDay WinterDesignDay, !- Field 2 Until: 6:00,0.00, !- Field 3 Until: 7:00,0.10, !- Field 5 Until: 8:00,0.50, !- Field 7 Until: 12:00,1.00, !- Field 9 Until: 13:00,0.50, !- Field 11 Until: 16:00,1.00, !- Field 13 Until: 17:00,0.50, !- Field 15 Until: 18:00,0.10, !- Field 17 Until: 24:00,0.00, !- Field 19 For: Weekends Holidays CustomDay1 CustomDay2, !- Field 21 Until: 24:00,0.00; !- Field 22 Schedule:Compact, Intermittent, !- Name ANY NUMBER, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays SummerDesignDay WinterDesignDay, !- Field 2 Until: 8:00,0.00, !- Field 3 Until: 18:00,1.00, !- Field 5 Until: 24:00,0.00, !- Field 7 For: Weekends Holidays CustomDay1 CustomDay2, !- Field 9 Until: 24:00,0.00; !- Field 10 Schedule:Compact, Office Lighting, !- Name ANY NUMBER, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays SummerDesignDay WinterDesignDay, !- Field 2 Until: 6:00,5.00E-002, !- Field 3 Until: 7:00,0.20, !- Field 5 Until: 17:00,1.00, !- Field 7 Until: 18:00,0.50, !- Field 9 Until: 24:00,5.00E-002, !- Field 11 For: Weekends Holidays CustomDay1 CustomDay2, !- Field 13 Until: 24:00,5.00E-002; !- Field 14 Schedule:Compact, On Peak, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Alldays, !- Field 2 Until: 9:00,0.00, !- Field 3 Until: 18:00,1.00, !- Field 5 Until: 24:00,0.00; !- Field 7 Schedule:Compact, Off Peak, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Alldays, !- Field 2 Until: 9:00,1.00, !- Field 3 Until: 18:00,0.00, !- Field 5 Until: 24:00,1.00; !- Field 7 Schedule:Compact, ON, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Alldays, !- Field 2 Until: 24:00,1.00; !- Field 3 Schedule:Compact, HEATING SETPOINTS, !- Name TEMPERATURE, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Alldays, !- Field 2 Until: 7:00,15.00, !- Field 3 Until: 17:00,20.00, !- Field 5 Until: 24:00,15.00; !- Field 7 Schedule:Compact, COOLING SETPOINTS, !- Name TEMPERATURE, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Alldays, !- Field 2 Until: 7:00,30.00, !- Field 3 Until: 20:00,23.00, !- Field 5 Until: 24:00,30.00; !- Field 7 Schedule:Compact, ZONE CONTROL TYPE SCHED, !- Name CONTROL TYPE, !- Schedule Type Limits Name Through: 3/31, !- Field 1 For: Alldays, !- Field 2 Until: 24:00,1, !- Field 3 Through: 9/30, !- Field 5 For: Alldays, !- Field 6 Until: 24:00,2, !- Field 7 Through: 12/31, !- Field 9 For: Alldays, !- Field 10 Until: 24:00,1; !- Field 11 Site:GroundTemperature:BuildingSurface,20.03,20.03,20.13,20.30,20.43,20.52,20.62,20.77,20.78,20.55,20.44,20.20; ! original zone origin (0,0,0) Zone, West Zone, !- Name 0.0000000E+00, !- Direction of Relative North {deg} 0.0000000E+00, !- X Origin {m} 0.0000000E+00, !- Y Origin {m} 0.0000000E+00, !- Z Origin {m} 1, !- Type 1, !- Multiplier autocalculate, !- Ceiling Height {m} autocalculate; !- Volume {m3} ! original zone origin (6.096,0,0) Zone, EAST ZONE, !- Name 0.0000000E+00, !- Direction of Relative North {deg} 0.0000000E+00, !- X Origin {m} 0.0000000E+00, !- Y Origin {m} 0.0000000E+00, !- Z Origin {m} 1, !- Type 1, !- Multiplier autocalculate, !- Ceiling Height {m} autocalculate; !- Volume {m3} ! original zone origin (0,6.096,0) Zone, NORTH ZONE, !- Name 0.0000000E+00, !- Direction of Relative North {deg} 0.0000000E+00, !- X Origin {m} 0.0000000E+00, !- Y Origin {m} 0.0000000E+00, !- Z Origin {m} 1, !- Type 1, !- Multiplier autocalculate, !- Ceiling Height {m} autocalculate; !- Volume {m3} People, West Zone, !- Name West Zone, !- Zone or ZoneList Name Office Occupancy, !- Number of People Schedule Name people, !- Number of People Calculation Method 3.000000, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000000, !- Fraction Radiant , !- Sensible Heat Fraction Activity Sch, !- Activity Level Schedule Name 3.82E-8, !- Carbon Dioxide Generation Rate {m3/s-W} , !- Enable ASHRAE 55 Comfort Warnings zoneaveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name Work Eff Sch, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name Clothing Sch, !- Clothing Insulation Schedule Name Air Velo Sch, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type ElectricEquipment, West Zone ElecEq 1, !- Name West Zone, !- Zone or ZoneList Name Intermittent, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 2928.751, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000000E+00, !- Fraction Latent 0.3000000, !- Fraction Radiant 0.0000000E+00; !- Fraction Lost People, EAST ZONE, !- Name EAST ZONE, !- Zone or ZoneList Name Office Occupancy, !- Number of People Schedule Name people, !- Number of People Calculation Method 3.000000, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000000, !- Fraction Radiant , !- Sensible Heat Fraction Activity Sch, !- Activity Level Schedule Name 3.82E-8, !- Carbon Dioxide Generation Rate {m3/s-W} , !- Enable ASHRAE 55 Comfort Warnings zoneaveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name Work Eff Sch, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name Clothing Sch, !- Clothing Insulation Schedule Name Air Velo Sch, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type Lights, EAST ZONE Lights 1, !- Name EAST ZONE, !- Zone or ZoneList Name Office Lighting, !- Schedule Name LightingLevel, !- Design Level Calculation Method 1464.375, !- Lighting Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000000E+00, !- Return Air Fraction 0.2000000, !- Fraction Radiant 0.2000000, !- Fraction Visible 0.0000000E+00, !- Fraction Replaceable GeneralLights; !- End-Use Subcategory ElectricEquipment, EAST ZONE ElecEq 1, !- Name EAST ZONE, !- Zone or ZoneList Name Intermittent, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 1464.375, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000000E+00, !- Fraction Latent 0.3000000, !- Fraction Radiant 0.0000000E+00; !- Fraction Lost People, NORTH ZONE, !- Name NORTH ZONE, !- Zone or ZoneList Name Office Occupancy, !- Number of People Schedule Name people, !- Number of People Calculation Method 4.000000, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000000, !- Fraction Radiant , !- Sensible Heat Fraction Activity Sch, !- Activity Level Schedule Name 3.82E-8, !- Carbon Dioxide Generation Rate {m3/s-W} , !- Enable ASHRAE 55 Comfort Warnings zoneaveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name Work Eff Sch, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name Clothing Sch, !- Clothing Insulation Schedule Name Air Velo Sch, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type Lights, NORTH ZONE Lights 1, !- Name NORTH ZONE, !- Zone or ZoneList Name Office Lighting, !- Schedule Name LightingLevel, !- Design Level Calculation Method 878.6252, !- Lighting Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000000E+00, !- Return Air Fraction 0.2000000, !- Fraction Radiant 0.2000000, !- Fraction Visible 0.0000000E+00, !- Fraction Replaceable GeneralLights; !- End-Use Subcategory ElectricEquipment, NORTH ZONE ElecEq 1, !- Name NORTH ZONE, !- Zone or ZoneList Name Intermittent, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 2928.751, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000000E+00, !- Fraction Latent 0.3000000, !- Fraction Radiant 0.0000000E+00; !- Fraction Lost GlobalGeometryRules, UpperLeftCorner, !- Starting Vertex Position CounterClockWise, !- Vertex Entry Direction World; !- Coordinate System BuildingSurface:Detailed, Zn001:Wall001, !- Name Wall, !- Surface Type EXTWALL80, !- Construction Name West Zone, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure 0.5000000, !- View Factor to Ground 4, !- Number of Vertices 0.0000000E+00,0.0000000E+00,3.048000, !- X,Y,Z ==> Vertex 1 {m} 0.0000000E+00,0.0000000E+00,0.0000000E+00, !- X,Y,Z ==> Vertex 2 {m} 6.096000,0.0000000E+00,0.0000000E+00, !- X,Y,Z ==> Vertex 3 {m} 6.096000,0.0000000E+00,3.048000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Zn001:Wall001:Win001, !- Name Window, !- Surface Type WIN-CON-SINGLEPANE, !- Construction Name Zn001:Wall001, !- Building Surface Name , !- Outside Boundary Condition Object 0.5000000, !- View Factor to Ground , !- Frame and Divider Name 1.0, !- Multiplier 4, !- Number of Vertices 0.548000,0.0000000E+00,2.5000, !- X,Y,Z ==> Vertex 1 {m} 0.548000,0.0000000E+00,0.5000, !- X,Y,Z ==> Vertex 2 {m} 5.548000,0.0000000E+00,0.5000, !- X,Y,Z ==> Vertex 3 {m} 5.548000,0.0000000E+00,2.5000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Zn001:Wall002, !- Name Wall, !- Surface Type EXTWALL80, !- Construction Name West Zone, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure 0.5000000, !- View Factor to Ground 4, !- Number of Vertices 0.0000000E+00,6.096000,3.048000, !- X,Y,Z ==> Vertex 1 {m} 0.0000000E+00,6.096000,0.0000000E+00, !- X,Y,Z ==> Vertex 2 {m} 0.0000000E+00,0.0000000E+00,0.0000000E+00, !- X,Y,Z ==> Vertex 3 {m} 0.0000000E+00,0.0000000E+00,3.048000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Zn001:Wall003, !- Name Wall, !- Surface Type PARTITION06, !- Construction Name West Zone, !- Zone Name Surface, !- Outside Boundary Condition Zn003:Wall004, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure 0.5000000, !- View Factor to Ground 4, !- Number of Vertices 6.096000,6.096000,3.048000, !- X,Y,Z ==> Vertex 1 {m} 6.096000,6.096000,0.0000000E+00, !- X,Y,Z ==> Vertex 2 {m} 0.0000000E+00,6.096000,0.0000000E+00, !- X,Y,Z ==> Vertex 3 {m} 0.0000000E+00,6.096000,3.048000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Zn001:Wall004, !- Name Wall, !- Surface Type PARTITION06, !- Construction Name West Zone, !- Zone Name Surface, !- Outside Boundary Condition Zn002:Wall004, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure 0.5000000, !- View Factor to Ground 4, !- Number of Vertices 6.096000,0.0000000E+00,3.048000, !- X,Y,Z ==> Vertex 1 {m} 6.096000,0.0000000E+00,0.0000000E+00, !- X,Y,Z ==> Vertex 2 {m} 6.096000,6.096000,0.0000000E+00, !- X,Y,Z ==> Vertex 3 {m} 6.096000,6.096000,3.048000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Zn001:Flr001, !- Name Floor, !- Surface Type FLOOR SLAB 8 IN, !- Construction Name West Zone, !- Zone Name Surface, !- Outside Boundary Condition Zn001:Flr001, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure 1.000000, !- View Factor to Ground 4, !- Number of Vertices 0.0000000E+00,0.0000000E+00,0.0000000E+00, !- X,Y,Z ==> Vertex 1 {m} 0.0000000E+00,6.096000,0.0000000E+00, !- X,Y,Z ==> Vertex 2 {m} 6.096000,6.096000,0.0000000E+00, !- X,Y,Z ==> Vertex 3 {m} 6.096000,0.0000000E+00,0.0000000E+00; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Zn001:Roof001, !- Name Roof, !- Surface Type ROOF34, !- Construction Name West Zone, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure 0.0000000E+00, !- View Factor to Ground 4, !- Number of Vertices 0.0000000E+00,6.096000,3.048000, !- X,Y,Z ==> Vertex 1 {m} 0.0000000E+00,0.0000000E+00,3.048000, !- X,Y,Z ==> Vertex 2 {m} 6.096000,0.0000000E+00,3.048000, !- X,Y,Z ==> Vertex 3 {m} 6.096000,6.096000,3.048000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Zn002:Wall001, !- Name Wall, !- Surface Type EXTWALL80, !- Construction Name EAST ZONE, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure 0.5000000, !- View Factor to Ground 4, !- Number of Vertices 12.19200,6.096000,3.048000, !- X,Y,Z ==> Vertex 1 {m} 12.19200,6.096000,0.0000000E+00, !- X,Y,Z ==> Vertex 2 {m} 9.144000,6.096000,0.0000000E+00, !- X,Y,Z ==> Vertex 3 {m} 9.144000,6.096000,3.048000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Zn002:Wall002, !- Name Wall, !- Surface Type EXTWALL80, !- Construction Name EAST ZONE, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure 0.5000000, !- View Factor to Ground 4, !- Number of Vertices 6.096000,0.0000000E+00,3.048000, !- X,Y,Z ==> Vertex 1 {m} 6.096000,0.0000000E+00,0.0000000E+00, !- X,Y,Z ==> Vertex 2 {m} 12.19200,0.0000000E+00,0.0000000E+00, !- X,Y,Z ==> Vertex 3 {m} 12.19200,0.0000000E+00,3.048000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Zn002:Wall003, !- Name Wall, !- Surface Type EXTWALL80, !- Construction Name EAST ZONE, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure 0.5000000, !- View Factor to Ground 4, !- Number of Vertices 12.19200,0.0000000E+00,3.048000, !- X,Y,Z ==> Vertex 1 {m} 12.19200,0.0000000E+00,0.0000000E+00, !- X,Y,Z ==> Vertex 2 {m} 12.19200,6.096000,0.0000000E+00, !- X,Y,Z ==> Vertex 3 {m} 12.19200,6.096000,3.048000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Zn002:Wall004, !- Name Wall, !- Surface Type PARTITION06, !- Construction Name EAST ZONE, !- Zone Name Surface, !- Outside Boundary Condition Zn001:Wall004, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure 0.5000000, !- View Factor to Ground 4, !- Number of Vertices 6.096000,6.096000,3.048000, !- X,Y,Z ==> Vertex 1 {m} 6.096000,6.096000,0.0000000E+00, !- X,Y,Z ==> Vertex 2 {m} 6.096000,0.0000000E+00,0.0000000E+00, !- X,Y,Z ==> Vertex 3 {m} 6.096000,0.0000000E+00,3.048000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Zn002:Wall005, !- Name Wall, !- Surface Type PARTITION06, !- Construction Name EAST ZONE, !- Zone Name Surface, !- Outside Boundary Condition Zn003:Wall005, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure 0.5000000, !- View Factor to Ground 4, !- Number of Vertices 9.144000,6.096000,3.048000, !- X,Y,Z ==> Vertex 1 {m} 9.144000,6.096000,0.0000000E+00, !- X,Y,Z ==> Vertex 2 {m} 6.096000,6.096000,0.0000000E+00, !- X,Y,Z ==> Vertex 3 {m} 6.096000,6.096000,3.048000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Zn002:Flr001, !- Name Floor, !- Surface Type FLOOR SLAB 8 IN, !- Construction Name EAST ZONE, !- Zone Name Surface, !- Outside Boundary Condition Zn002:Flr001, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure 1.000000, !- View Factor to Ground 4, !- Number of Vertices 6.096000,0.0000000E+00,0.0000000E+00, !- X,Y,Z ==> Vertex 1 {m} 6.096000,6.096000,0.0000000E+00, !- X,Y,Z ==> Vertex 2 {m} 12.19200,6.096000,0.0000000E+00, !- X,Y,Z ==> Vertex 3 {m} 12.19200,0.0000000E+00,0.0000000E+00; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Zn002:Roof001, !- Name Roof, !- Surface Type ROOF34, !- Construction Name EAST ZONE, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure 0.0000000E+00, !- View Factor to Ground 4, !- Number of Vertices 6.096000,6.096000,3.048000, !- X,Y,Z ==> Vertex 1 {m} 6.096000,0.0000000E+00,3.048000, !- X,Y,Z ==> Vertex 2 {m} 12.19200,0.0000000E+00,3.048000, !- X,Y,Z ==> Vertex 3 {m} 12.19200,6.096000,3.048000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Zn003:Wall001, !- Name Wall, !- Surface Type EXTWALL80, !- Construction Name NORTH ZONE, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure 0.5000000, !- View Factor to Ground 4, !- Number of Vertices 0.0000000E+00,12.19200,3.048000, !- X,Y,Z ==> Vertex 1 {m} 0.0000000E+00,12.19200,0.0000000E+00, !- X,Y,Z ==> Vertex 2 {m} 0.0000000E+00,6.096000,0.0000000E+00, !- X,Y,Z ==> Vertex 3 {m} 0.0000000E+00,6.096000,3.048000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Zn003:Wall002, !- Name Wall, !- Surface Type EXTWALL80, !- Construction Name NORTH ZONE, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure 0.5000000, !- View Factor to Ground 4, !- Number of Vertices 9.144000,12.19200,3.048000, !- X,Y,Z ==> Vertex 1 {m} 9.144000,12.19200,0.0000000E+00, !- X,Y,Z ==> Vertex 2 {m} 0.0000000E+00,12.19200,0.0000000E+00, !- X,Y,Z ==> Vertex 3 {m} 0.0000000E+00,12.19200,3.048000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Zn003:Wall003, !- Name Wall, !- Surface Type EXTWALL80, !- Construction Name NORTH ZONE, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure 0.5000000, !- View Factor to Ground 4, !- Number of Vertices 9.144000,6.096000,3.048000, !- X,Y,Z ==> Vertex 1 {m} 9.144000,6.096000,0.0000000E+00, !- X,Y,Z ==> Vertex 2 {m} 9.144000,12.19200,0.0000000E+00, !- X,Y,Z ==> Vertex 3 {m} 9.144000,12.19200,3.048000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Zn003:Wall004, !- Name Wall, !- Surface Type PARTITION06, !- Construction Name NORTH ZONE, !- Zone Name Surface, !- Outside Boundary Condition Zn001:Wall003, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure 0.5000000, !- View Factor to Ground 4, !- Number of Vertices 0.0000000E+00,6.096000,3.048000, !- X,Y,Z ==> Vertex 1 {m} 0.0000000E+00,6.096000,0.0000000E+00, !- X,Y,Z ==> Vertex 2 {m} 6.096000,6.096000,0.0000000E+00, !- X,Y,Z ==> Vertex 3 {m} 6.096000,6.096000,3.048000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Zn003:Wall005, !- Name Wall, !- Surface Type PARTITION06, !- Construction Name NORTH ZONE, !- Zone Name Surface, !- Outside Boundary Condition Zn002:Wall005, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure 0.5000000, !- View Factor to Ground 4, !- Number of Vertices 6.096000,6.096000,3.048000, !- X,Y,Z ==> Vertex 1 {m} 6.096000,6.096000,0.0000000E+00, !- X,Y,Z ==> Vertex 2 {m} 9.144000,6.096000,0.0000000E+00, !- X,Y,Z ==> Vertex 3 {m} 9.144000,6.096000,3.048000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Zn003:Flr001, !- Name Floor, !- Surface Type FLOOR SLAB 8 IN, !- Construction Name NORTH ZONE, !- Zone Name Surface, !- Outside Boundary Condition Zn003:Flr001, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure 1.000000, !- View Factor to Ground 4, !- Number of Vertices 0.0000000E+00,6.096000,0.0000000E+00, !- X,Y,Z ==> Vertex 1 {m} 0.0000000E+00,12.19200,0.0000000E+00, !- X,Y,Z ==> Vertex 2 {m} 9.144000,12.19200,0.0000000E+00, !- X,Y,Z ==> Vertex 3 {m} 9.144000,6.096000,0.0000000E+00; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Zn003:Roof001, !- Name Roof, !- Surface Type ROOF34, !- Construction Name NORTH ZONE, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure 0.0000000E+00, !- View Factor to Ground 4, !- Number of Vertices 0.0000000E+00,12.19200,3.048000, !- X,Y,Z ==> Vertex 1 {m} 0.0000000E+00,6.096000,3.048000, !- X,Y,Z ==> Vertex 2 {m} 9.144000,6.096000,3.048000, !- X,Y,Z ==> Vertex 3 {m} 9.144000,12.19200,3.048000; !- X,Y,Z ==> Vertex 4 {m} ZoneControl:Thermostat, Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type Cooling Setpoint with SB;!- Control 2 Name ZoneControl:Thermostat, Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type Cooling Setpoint with SB;!- Control 2 Name ZoneControl:Thermostat, Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type Cooling Setpoint with SB;!- Control 2 Name ThermostatSetpoint:SingleHeating, Heating Setpoint with SB,!- Name Heating Setpoints; !- Setpoint Temperature Schedule Name ThermostatSetpoint:SingleCooling, Cooling Setpoint with SB,!- Name Cooling Setpoints; !- Setpoint Temperature Schedule Name ZoneHVAC:EquipmentConnections, West Zone, !- Zone Name Zone1Equipment, !- Zone Conditioning Equipment List Name Zone1Inlets, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name NODE_4, !- Zone Air Node Name NODE_5; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, EAST ZONE, !- Zone Name Zone2Equipment, !- Zone Conditioning Equipment List Name Zone2Inlets, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name NODE_6, !- Zone Air Node Name NODE_7; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, NORTH ZONE, !- Zone Name Zone3Equipment, !- Zone Conditioning Equipment List Name Zone3Inlets, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name NODE_8, !- Zone Air Node Name NODE_9; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentList, Zone1Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:IdealLoadsAirSystem, !- Zone Equipment 1 Object Type Zone1Air, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1, !- Zone Equipment 1 Heating or No-Load Sequence , !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name ; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name ZoneHVAC:EquipmentList, Zone2Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:IdealLoadsAirSystem, !- Zone Equipment 1 Object Type Zone2Air, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1, !- Zone Equipment 1 Heating or No-Load Sequence , !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name ; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name ZoneHVAC:EquipmentList, Zone3Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:IdealLoadsAirSystem, !- Zone Equipment 1 Object Type Zone3Air, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1, !- Zone Equipment 1 Heating or No-Load Sequence , !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name ; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name ZoneHVAC:IdealLoadsAirSystem, Zone1Air, !- Name , !- Availability Schedule Name NODE_1, !- Zone Supply Air Node Name , !- Zone Exhaust Air Node Name , !- System Inlet Air Node Name 50, !- Maximum Heating Supply Air Temperature {C} 13, !- Minimum Cooling Supply Air Temperature {C} 0.015, !- Maximum Heating Supply Air Humidity Ratio {kgWater/kgDryAir} 0.009, !- Minimum Cooling Supply Air Humidity Ratio {kgWater/kgDryAir} NoLimit, !- Heating Limit autosize, !- Maximum Heating Air Flow Rate {m3/s} , !- Maximum Sensible Heating Capacity {W} NoLimit, !- Cooling Limit autosize, !- Maximum Cooling Air Flow Rate {m3/s} , !- Maximum Total Cooling Capacity {W} , !- Heating Availability Schedule Name , !- Cooling Availability Schedule Name ConstantSupplyHumidityRatio, !- Dehumidification Control Type , !- Cooling Sensible Heat Ratio {dimensionless} ConstantSupplyHumidityRatio, !- Humidification Control Type , !- Design Specification Outdoor Air Object Name , !- Outdoor Air Inlet Node Name , !- Demand Controlled Ventilation Type , !- Outdoor Air Economizer Type , !- Heat Recovery Type , !- Sensible Heat Recovery Effectiveness {dimensionless} ; !- Latent Heat Recovery Effectiveness {dimensionless} ZoneHVAC:IdealLoadsAirSystem, Zone2Air, !- Name , !- Availability Schedule Name NODE_2, !- Zone Supply Air Node Name , !- Zone Exhaust Air Node Name , !- System Inlet Air Node Name 50, !- Maximum Heating Supply Air Temperature {C} 13, !- Minimum Cooling Supply Air Temperature {C} 0.015, !- Maximum Heating Supply Air Humidity Ratio {kgWater/kgDryAir} 0.009, !- Minimum Cooling Supply Air Humidity Ratio {kgWater/kgDryAir} NoLimit, !- Heating Limit autosize, !- Maximum Heating Air Flow Rate {m3/s} , !- Maximum Sensible Heating Capacity {W} NoLimit, !- Cooling Limit autosize, !- Maximum Cooling Air Flow Rate {m3/s} , !- Maximum Total Cooling Capacity {W} , !- Heating Availability Schedule Name , !- Cooling Availability Schedule Name ConstantSupplyHumidityRatio, !- Dehumidification Control Type , !- Cooling Sensible Heat Ratio {dimensionless} ConstantSupplyHumidityRatio, !- Humidification Control Type , !- Design Specification Outdoor Air Object Name , !- Outdoor Air Inlet Node Name , !- Demand Controlled Ventilation Type , !- Outdoor Air Economizer Type , !- Heat Recovery Type , !- Sensible Heat Recovery Effectiveness {dimensionless} ; !- Latent Heat Recovery Effectiveness {dimensionless} ZoneHVAC:IdealLoadsAirSystem, Zone3Air, !- Name , !- Availability Schedule Name NODE_3, !- Zone Supply Air Node Name , !- Zone Exhaust Air Node Name , !- System Inlet Air Node Name 50, !- Maximum Heating Supply Air Temperature {C} 13, !- Minimum Cooling Supply Air Temperature {C} 0.015, !- Maximum Heating Supply Air Humidity Ratio {kgWater/kgDryAir} 0.009, !- Minimum Cooling Supply Air Humidity Ratio {kgWater/kgDryAir} NoLimit, !- Heating Limit autosize, !- Maximum Heating Air Flow Rate {m3/s} , !- Maximum Sensible Heating Capacity {W} NoLimit, !- Cooling Limit autosize, !- Maximum Cooling Air Flow Rate {m3/s} , !- Maximum Total Cooling Capacity {W} , !- Heating Availability Schedule Name , !- Cooling Availability Schedule Name ConstantSupplyHumidityRatio, !- Dehumidification Control Type , !- Cooling Sensible Heat Ratio {dimensionless} ConstantSupplyHumidityRatio, !- Humidification Control Type , !- Design Specification Outdoor Air Object Name , !- Outdoor Air Inlet Node Name , !- Demand Controlled Ventilation Type , !- Outdoor Air Economizer Type , !- Heat Recovery Type , !- Sensible Heat Recovery Effectiveness {dimensionless} ; !- Latent Heat Recovery Effectiveness {dimensionless} NodeList, Zone1Inlets, !- Name NODE_1; !- Node 1 Name NodeList, Zone2Inlets, !- Name NODE_2; !- Node 1 Name NodeList, Zone3Inlets, !- Name NODE_3; !- Node 1 Name Output:Variable,Environment,Site Outdoor Air Drybulb Temperature,timestep; Output:Variable,*,Zone Mean Air Temperature,timestep; Output:Variable,Zn001:Wall001:Win001,Surface Outside Face Incident Solar Radiation Rate per Area,timestep; Output:Variable,*,Surface Shading Device Is On Time Fraction,timestep; Output:Variable,*,Zone Mean Radiant Temperature,timestep; Output:Variable,*,Surface Window Blind Slat Angle,timestep; Output:Variable,*,Surface Window Transmitted Solar Radiation Rate,timestep; Output:Variable,*,Surface Window Total Glazing Layers Absorbed Solar Radiation Rate,timestep; Output:Variable,*,Surface Window Heat Gain Rate,timestep; Output:Variable,*,Surface Window Heat Loss Rate,timestep; Output:Variable,*,Surface Window Shading Device Absorbed Solar Radiation Rate,timestep; Output:Variable,*,Surface Window System Solar Transmittance,timestep; Output:Variable,*,Surface Window System Solar Reflectance,timestep; Output:Variable,*,Surface Window System Solar Absorptance,timestep; Output:Variable,*,Zone Air System Sensible Cooling Rate,timestep; Output:Variable,*,Zone Air System Sensible Heating Rate,timestep; Output:Variable,*,Zone Air Temperature,timestep; Output:Variable,*,Zone Air Humidity Ratio,timestep; Output:VariableDictionary,Regular; Output:Surfaces:Drawing,dxf; Output:Constructions,Constructions; Output:Variable,*,Zone Thermal Comfort Fanger Model PMV,timestep; Output:Meter:MeterFileOnly,Electricity:Facility,monthly; Output:Meter:MeterFileOnly,Electricity:Building,monthly; Output:Meter:MeterFileOnly,InteriorLights:Electricity,monthly; Output:Meter:MeterFileOnly,Electricity:Facility,runperiod; Output:Meter:MeterFileOnly,Electricity:Building,runperiod; Output:Meter:MeterFileOnly,InteriorLights:Electricity,runperiod; OutputControl:Table:Style, HTML; !- Column Separator Output:Table:SummaryReports, AllSummary; !- Report 1 Name Output:EnergyManagementSystem, Verbose, !- Actuator Availability Dictionary Reporting Verbose, !- Internal Variable Availability Dictionary Reporting Verbose; !- EMS Runtime Language Debug Output Level EnergyManagementSystem:Sensor, Solar_Beam_Incident_Cos, !- Name Zn001:Wall001:Win001, !- Output:Variable or Output:Meter Index Key Name Surface Outside Face Beam Solar Incident Angle Cosine Value; !- Output:Variable or Output:Meter Name Output:Variable,Zn001:Wall001:Win001,Surface Outside Face Beam Solar Incident Angle Cosine Value,Timestep; EnergyManagementSystem:Sensor, Zone_Sensible_Heat_Rate, !- Name WEST ZONE, !- Output:Variable or Output:Meter Index Key Name Zone Air System Sensible Heating Rate; !- Output:Variable or Output:Meter Name Output:Variable,WEST ZONE,Zone Air System Sensible Heating Rate,Timestep; EnergyManagementSystem:Sensor, Zone_Sensible_Cool_Rate, !- Name WEST ZONE, !- Output:Variable or Output:Meter Index Key Name Zone Air System Sensible Cooling Rate; !- Output:Variable or Output:Meter Name Output:Variable,WEST ZONE,Zone Air System Sensible Cooling Rate,Timestep; EnergyManagementSystem:ProgramCallingManager, Window Shading Device EMS Controller, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point Set_Shade_Control_State; !- Program Name 1 ExternalInterface, PtolemyServer; !- Name of External Interface ExternalInterface:Variable, yShade, !- Name 1; !- Initial Value ! EMS program. The first assignments sets the shading status and converts it into the ! EnergyPlus signal (i.e., replace 1 by 6). ! The second assignment sets yShade to ! an EnergyManagementSystem:OutputVariable ! which will be read by the external interface. EnergyManagementSystem:Program, Set_Shade_Control_State, !- Name Set Shade_Signal = 6*yShade, !- Program Line 1 Set Shade_Signal_01 = yShade+0.1; !- Program Line 2 ! Declare an actuator to which the EnergyManagementSystem:Program will write EnergyManagementSystem:Actuator, Shade_Signal, !- Name Zn001:Wall001:Win001, !- Actuated Component Unique Name Window Shading Control, !- Actuated Component Type Control Status; !- Actuated Component Control Type ! Declare a global variable to which the EnergyManagementSystem:Program will write EnergyManagementSystem:GlobalVariable, Shade_Signal_01; !- Erl Variable 1 Name ! Declare an output variable. This variable is equal to the shading signal + 0.1 ! It will be read by the external interface to demonstrate how to receive variables. EnergyManagementSystem:OutputVariable, Erl Shading Control Status, !- Name Shade_Signal_01, !- EMS Variable Name Averaged, !- Type of Data in Variable ZoneTimeStep, !- Update Frequency , !- EMS Program or Subroutine Name ; !- Units EnergyManagementSystem:ProgramCallingManager, Init Window Shading Device Control Constants, !- Name BeginNewEnvironment, !- EnergyPlus Model Calling Point InitializeShadeControlFlags; !- Program Name 1 EnergyManagementSystem:GlobalVariable, Shade_Status_None; !- Erl Variable 1 Name EnergyManagementSystem:GlobalVariable, Shade_Status_Off; !- Erl Variable 1 Name EnergyManagementSystem:GlobalVariable, Shade_Status_Interior_Shade_On; !- Erl Variable 1 Name EnergyManagementSystem:GlobalVariable, Shade_Status_Switchable_Dark; !- Erl Variable 1 Name EnergyManagementSystem:GlobalVariable, Shade_Status_Exterior_Shade_On; !- Erl Variable 1 Name EnergyManagementSystem:GlobalVariable, Shade_Status_Interior_Blind_On; !- Erl Variable 1 Name EnergyManagementSystem:GlobalVariable, Shade_Status_Exterior_Blind_On; !- Erl Variable 1 Name EnergyManagementSystem:GlobalVariable, Shade_Status_Between_Glass_Shade_On; !- Erl Variable 1 Name EnergyManagementSystem:GlobalVariable, Shade_Status_Between_Glass_Blind_On; !- Erl Variable 1 Name ! these are control flag values used inside EnergyPlus for window shades ! EMS control of window shading devices involves setting the control values for shading control actuators with ! one of these values. The variable names can be used or replaced, it is the whole number values that trigger ! changes in the modeling. ! Shades and Blinds are either fully on or fully off, partial positions require multiple windows. ! the window shading control flag values follow ! -1: if window has no shading device ! 0: if shading device is off ! 1: if interior shade is on ! 2: if glazing is switched to darker state ! 3: if exterior shade is on ! 6: if interior blind is on ! 7: if exterior blind is on ! 8: if between-glass shade is on ! 9: if between-glass blind is on EnergyManagementSystem:Program, InitializeShadeControlFlags, !- Name Set Shade_Status_None = 0.0 - 1.0, !- Program Line 1 Set Shade_Status_Off = 0.0, !- Program Line 2 Set Shade_Status_Interior_Shade_On = 1.0, !- Set Shade_Status_Switchable_Dark = 2.0, !- Set Shade_Status_Exterior_Shade_On = 3.0, !- Set Shade_Status_Interior_Blind_On = 6.0, !- Set Shade_Status_Exterior_Blind_On = 7.0, !- Set Shade_Status_Between_Glass_Shade_On = 8.0, !- Set Shade_Status_Between_Glass_Blind_On = 9.0; !- ! 10: window has interior shade that is off but may be triggered on later ! to control daylight glare ! 20: window has switchable glazing that is unswitched but may be switched later ! to control daylight glare or daylight illuminance ! 30: window has exterior shade that is off but may be triggered on later ! to control daylight glare or daylight illuminance ! 60: window has interior blind that is off but may be triggered on later ! to control daylight glare or daylight illuminance ! 70: window has exterior blind that is off but may be triggered on later ! to control daylight glare or daylight illuminance ! 80: window has between-glass shade that is off but may be triggered on later ! to control daylight glare or daylight illuminance ! 90: window has between-glass blind that is off but may be triggered on later ! to control daylight glare or daylight illuminance ! A "shading device" may be an exterior, interior or between-glass shade or blind, ! or the lower-transmitting (dark) state of switchable glazing (e.g., electrochromic). ! In all cases, the unshaded condition is represented ! by the construction given by window's Surface()%Construction and ! the shaded condition is represented by the construction given by ! the window's Surface()%ShadedConstruction