# OHLOOM - Assembly Guide \[ENG\]
[**\[GER\]**](AssemblyGuide_de.md)
## Index
1. Assembly Parts
1. [Metal Parts](#metal-parts)
2. [3D Print Parts](#print-parts)
3. [CNC Parts](#cnc-parts)
4. [Other Parts](#other-parts)
2. Assembly Preparation
1. [Colorful Wood Protection Film](#protection)
3. [Assembly](#assembly)
# 1. Assembly Parts
## 1.1. Metal Parts {#metal-parts}
| | | |
| :----: | :----: | :----: |
|  2 x Threaded rod M8 x 180 mm |  4 x M8 Nuts |  2 x M8 Nuts with Rubber |
|  4 x M6 Nuts |  4 x M6 Cylinder Screw |
|  8 x W60x4 Wood Screw |  4 x W35x4 Wood Screw |  16 x W12x4 Wood Screw |
## 1.2. 3D Print Parts {#print-parts}
| | | |
| :----: | :----: | :----: |
|  2 x Ratchet Wheel |  2 x Clamp Ring |  5 x Comb Module |
|  2 x Ratchet Pawl |  12 x Screw Socket w |  4 x Screw Socket w/o |
|  2 x Outer Warpcloth Beam (4 parts each) |
## 1.3. CNC Parts (Wood) {#cnc-parts}
| | | |
| :----: | :----: | :----: |
|  2 x Comb Holder |  2 x Side Frame |  2 x Cross Beam |
|  2 x Slot Beam |  2 x String Stick |  1 x Shuttle |
## 1.4. Other Parts {#other-parts}
| | |
| :----: | :----: |
|  2 x Inner Warpcloth Beam |  ca. 3 m String |
# 2. Assembly Preparation
## 2.1. Colorful Wood Protection Film {#protection}
| |
| :----: |
|  |
| 1. You will need color pigments, line oil, an empty glass, and a Brush  |
| 2. First, fill in the pigments (ca. 10-20 grams).  |
| 3. Next poor 8-10 times as much oil as pigments into the glass.  |
| 4. Stir it well, until you have got a smooth equally colored liquid without spots.  |
| 5. Make sure the wooden surface is clean and dry. |
| 6. Apply 1-3 layer, till you have got the wanted look. |
| 7. Let it dry for several hours (or better, leave it overnight). |
# 3. Assembly {#assembly}
| | | | |
|-|----|----|----|
| 1. |  |  |
| 2. |  |  |
| 3. |  |  |
| 4. |  |  |
| 5. |  |  |
| 6. |  |  |
| 7. |  |  |  |
| 8. |  |  |  |
| 9. |  |  |  |
| 10. |  |  |
| 11. |  |
| 12. |  |
Voila! You just finished assembling your first OHLOOM. Congrats!