(kicad_pcb (version 20171130) (host pcbnew 5.1.10) (general (thickness 1.6) (drawings 0) (tracks 357) (zones 0) (modules 30) (nets 60) ) (page A4) (layers (0 F.Cu signal) (1 In1.Cu signal) (2 In2.Cu signal) (31 B.Cu signal) (32 B.Adhes user) (33 F.Adhes user) (34 B.Paste user) (35 F.Paste user) (36 B.SilkS user) (37 F.SilkS user) (38 B.Mask user) (39 F.Mask user) (40 Dwgs.User user) (41 Cmts.User user) (42 Eco1.User user) (43 Eco2.User user) (44 Edge.Cuts user) (45 Margin user) (46 B.CrtYd user) (47 F.CrtYd user) (48 B.Fab user) (49 F.Fab user) ) (setup (last_trace_width 0.25) (user_trace_width 0.4) (trace_clearance 0.2) (zone_clearance 0.508) (zone_45_only no) (trace_min 0.2) (via_size 0.8) (via_drill 0.4) (via_min_size 0.4) (via_min_drill 0.3) (uvia_size 0.3) (uvia_drill 0.1) (uvias_allowed no) (uvia_min_size 0.2) (uvia_min_drill 0.1) (edge_width 0.05) (segment_width 0.2) (pcb_text_width 0.3) (pcb_text_size 1.5 1.5) (mod_edge_width 0.12) (mod_text_size 1 1) (mod_text_width 0.15) (pad_size 1.524 1.524) (pad_drill 0.762) (pad_to_mask_clearance 0) (aux_axis_origin 0 0) (visible_elements FFFFFF7F) (pcbplotparams (layerselection 0x010fc_ffffffff) (usegerberextensions false) (usegerberattributes true) (usegerberadvancedattributes true) (creategerberjobfile true) (excludeedgelayer true) (linewidth 0.100000) (plotframeref false) (viasonmask false) (mode 1) (useauxorigin false) (hpglpennumber 1) (hpglpenspeed 20) (hpglpendiameter 15.000000) (psnegative false) (psa4output false) (plotreference true) (plotvalue true) (plotinvisibletext false) (padsonsilk false) (subtractmaskfromsilk false) (outputformat 1) (mirror false) (drillshape 1) (scaleselection 1) (outputdirectory "")) ) (net 0 "") (net 1 GND) (net 2 /OE) (net 3 /SEL) (net 4 +3V3) (net 5 /I2D+) (net 6 /I2D-) (net 7 /I1D+) (net 8 /I1SBU2) (net 9 /I1D-) (net 10 /I1SBU1) (net 11 /I1TX1+) (net 12 /I1TX1-) (net 13 /I1RX1+) (net 14 /I1RX1-) (net 15 /I1TX2+) (net 16 /I1TX2-) (net 17 /I1RX2+) (net 18 /I1RX2-) (net 19 /I2RX1+) (net 20 /I2RX1-) (net 21 /I2SBU2) (net 22 /I2TX2-) (net 23 /I2TX2+) (net 24 /I2RX2+) (net 25 /I2SBU1) (net 26 /I2RX2-) (net 27 /I2TX1-) (net 28 /I2TX1+) (net 29 /ORX1+) (net 30 /ORX1-) (net 31 /OSBU2) (net 32 /OTX2-) (net 33 /OTX2+) (net 34 /OD-) (net 35 /OD+) (net 36 /ORX2+) (net 37 /OSBU1) (net 38 /ORX2-) (net 39 /OTX1-) (net 40 /OTX1+) (net 41 /CRY1) (net 42 /CRY0) (net 43 /NRST) (net 44 /SWCLK) (net 45 /SWDIO) (net 46 VBUS) (net 47 "Net-(J3-PadA4)") (net 48 "Net-(J4-PadA4)") (net 49 "Net-(R4-Pad2)") (net 50 "Net-(L1-Pad1)") (net 51 "Net-(C2-Pad1)") (net 52 "Net-(C3-Pad1)") (net 53 "Net-(R1-Pad2)") (net 54 /EN2) (net 55 /EN1) (net 56 "Net-(R5-Pad2)") (net 57 "Net-(R7-Pad2)") (net 58 "Net-(R9-Pad2)") (net 59 "Net-(R10-Pad2)") (net_class Default "This is the default net class." (clearance 0.2) (trace_width 0.25) (via_dia 0.8) (via_drill 0.4) (uvia_dia 0.3) (uvia_drill 0.1) (add_net +3V3) (add_net /CRY0) (add_net /CRY1) (add_net /EN1) (add_net /EN2) (add_net /I1D+) (add_net /I1D-) (add_net /I1RX1+) (add_net /I1RX1-) (add_net /I1RX2+) (add_net /I1RX2-) (add_net /I1SBU1) (add_net /I1SBU2) (add_net /I1TX1+) (add_net /I1TX1-) (add_net /I1TX2+) (add_net /I1TX2-) (add_net /I2D+) (add_net /I2D-) (add_net /I2RX1+) (add_net /I2RX1-) (add_net /I2RX2+) (add_net /I2RX2-) (add_net /I2SBU1) (add_net /I2SBU2) (add_net /I2TX1+) (add_net /I2TX1-) (add_net /I2TX2+) (add_net /I2TX2-) (add_net /NRST) (add_net /OD+) (add_net /OD-) (add_net /OE) (add_net /ORX1+) (add_net /ORX1-) (add_net /ORX2+) (add_net /ORX2-) (add_net /OSBU1) (add_net /OSBU2) (add_net /OTX1+) (add_net /OTX1-) (add_net /OTX2+) (add_net /OTX2-) (add_net /SEL) (add_net /SWCLK) (add_net /SWDIO) (add_net GND) (add_net "Net-(C2-Pad1)") (add_net "Net-(C3-Pad1)") (add_net "Net-(J3-PadA4)") (add_net "Net-(J4-PadA4)") (add_net "Net-(L1-Pad1)") (add_net "Net-(R1-Pad2)") (add_net "Net-(R10-Pad2)") (add_net "Net-(R4-Pad2)") (add_net "Net-(R5-Pad2)") (add_net "Net-(R7-Pad2)") (add_net "Net-(R9-Pad2)") (add_net "Net-(U6-Pad13)") (add_net "Net-(U7-Pad13)") (add_net VBUS) ) (module VQFN20:VQFN19_3x3x0.9mm (layer F.Cu) (tedit 60D253FD) (tstamp 60D2FB3C) (at 83 22.4) (path /60F144A1) (fp_text reference U7 (at 0 -4.5) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value UCS3205 (at 0 -3) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 20 smd roundrect (at -0.52 -0.17) (size 0.8 1.35) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 46 VBUS)) (pad 21 smd roundrect (at 0.55 -0.17) (size 0.8 1.35) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 47 "Net-(J3-PadA4)")) (pad 19 smd roundrect (at -1 -1.55) (size 0.3 0.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 46 VBUS)) (pad 18 smd roundrect (at -0.5 -1.55) (size 0.3 0.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 46 VBUS)) (pad 17 smd roundrect (at 0.5 -1.55) (size 0.3 0.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 47 "Net-(J3-PadA4)")) (pad 16 smd roundrect (at 1 -1.55) (size 0.3 0.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 47 "Net-(J3-PadA4)")) (pad 15 smd roundrect (at 1.55 -1 270) (size 0.3 0.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 14 smd roundrect (at 1.55 -0.5 270) (size 0.3 0.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 57 "Net-(R7-Pad2)")) (pad 13 smd roundrect (at 1.55 0 270) (size 0.3 0.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)) (pad 12 smd roundrect (at 1.55 0.5 270) (size 0.3 0.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)) (pad 11 smd roundrect (at 1.55 1 270) (size 0.3 0.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 59 "Net-(R10-Pad2)")) (pad 10 smd roundrect (at 1 1.55 180) (size 0.3 0.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)) (pad 9 smd roundrect (at 0.5 1.55 180) (size 0.3 0.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)) (pad 8 smd roundrect (at 0 1.55 180) (size 0.3 0.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)) (pad 7 smd roundrect (at -0.5 1.55 180) (size 0.3 0.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)) (pad 6 smd roundrect (at -1 1.55 180) (size 0.3 0.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)) (pad 5 smd roundrect (at -1.55 1 90) (size 0.3 0.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 46 VBUS)) (pad 4 smd roundrect (at -1.55 0.5 90) (size 0.3 0.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 46 VBUS)) (pad 3 smd roundrect (at -1.55 0 90) (size 0.3 0.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 2 smd roundrect (at -1.55 -0.5 90) (size 0.3 0.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 55 /EN1)) (pad 1 smd roundrect (at -1.55 -1 90) (size 0.3 0.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) ) (module VQFN20:VQFN19_3x3x0.9mm (layer F.Cu) (tedit 60D253FD) (tstamp 60D2FB23) (at 117.72 34.17) (path /60D16145) (fp_text reference U6 (at 0 -4.5) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value UCS3205 (at 0 -3) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 20 smd roundrect (at -0.52 -0.17) (size 0.8 1.35) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 46 VBUS)) (pad 21 smd roundrect (at 0.55 -0.17) (size 0.8 1.35) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 48 "Net-(J4-PadA4)")) (pad 19 smd roundrect (at -1 -1.55) (size 0.3 0.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 46 VBUS)) (pad 18 smd roundrect (at -0.5 -1.55) (size 0.3 0.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 46 VBUS)) (pad 17 smd roundrect (at 0.5 -1.55) (size 0.3 0.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 48 "Net-(J4-PadA4)")) (pad 16 smd roundrect (at 1 -1.55) (size 0.3 0.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 48 "Net-(J4-PadA4)")) (pad 15 smd roundrect (at 1.55 -1 270) (size 0.3 0.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 14 smd roundrect (at 1.55 -0.5 270) (size 0.3 0.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 56 "Net-(R5-Pad2)")) (pad 13 smd roundrect (at 1.55 0 270) (size 0.3 0.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)) (pad 12 smd roundrect (at 1.55 0.5 270) (size 0.3 0.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)) (pad 11 smd roundrect (at 1.55 1 270) (size 0.3 0.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 58 "Net-(R9-Pad2)")) (pad 10 smd roundrect (at 1 1.55 180) (size 0.3 0.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)) (pad 9 smd roundrect (at 0.5 1.55 180) (size 0.3 0.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)) (pad 8 smd roundrect (at 0 1.55 180) (size 0.3 0.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)) (pad 7 smd roundrect (at -0.5 1.55 180) (size 0.3 0.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)) (pad 6 smd roundrect (at -1 1.55 180) (size 0.3 0.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)) (pad 5 smd roundrect (at -1.55 1 90) (size 0.3 0.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 46 VBUS)) (pad 4 smd roundrect (at -1.55 0.5 90) (size 0.3 0.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 46 VBUS)) (pad 3 smd roundrect (at -1.55 0 90) (size 0.3 0.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 2 smd roundrect (at -1.55 -0.5 90) (size 0.3 0.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 54 /EN2)) (pad 1 smd roundrect (at -1.55 -1 90) (size 0.3 0.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) ) (module Resistor_SMD:R_0805_2012Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 60D271FB) (at 56.04 24.97) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags resistor) (path /60F144D2) (attr smd) (fp_text reference R10 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 10k (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.625) (end -1 -0.625) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.625) (end 1 -0.625) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.625) (end 1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.625) (end -1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -0.227064 0.735) (end 0.227064 0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (pad 2 smd roundrect (at 0.9125 0) (size 1.025 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.243902) (net 59 "Net-(R10-Pad2)")) (pad 1 smd roundrect (at -0.9125 0) (size 1.025 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.243902) (net 46 VBUS)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0805_2012Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 60D271EA) (at 51.59 27.92) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags resistor) (path /60E7476F) (attr smd) (fp_text reference R9 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 10k (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.625) (end -1 -0.625) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.625) (end 1 -0.625) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.625) (end 1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.625) (end -1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -0.227064 0.735) (end 0.227064 0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (pad 2 smd roundrect (at 0.9125 0) (size 1.025 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.243902) (net 58 "Net-(R9-Pad2)")) (pad 1 smd roundrect (at -0.9125 0) (size 1.025 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.243902) (net 46 VBUS)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0805_2012Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 60D271D9) (at 56.14 22.02) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags resistor) (path /60F144C6) (attr smd) (fp_text reference R8 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 640 (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.625) (end -1 -0.625) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.625) (end 1 -0.625) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.625) (end 1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.625) (end -1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -0.227064 0.735) (end 0.227064 0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (pad 2 smd roundrect (at 0.9125 0) (size 1.025 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.243902) (net 1 GND)) (pad 1 smd roundrect (at -0.9125 0) (size 1.025 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.243902) (net 57 "Net-(R7-Pad2)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0805_2012Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 60D2FF6D) (at 51.63 24.97) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags resistor) (path /60F144C0) (attr smd) (fp_text reference R7 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 10k (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.625) (end -1 -0.625) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.625) (end 1 -0.625) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.625) (end 1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.625) (end -1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -0.227064 0.735) (end 0.227064 0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (pad 2 smd roundrect (at 0.9125 0) (size 1.025 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.243902) (net 57 "Net-(R7-Pad2)")) (pad 1 smd roundrect (at -0.9125 0) (size 1.025 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.243902) (net 46 VBUS)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0805_2012Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 60D271B7) (at 47.18 27.78) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags resistor) (path /60DFEE06) (attr smd) (fp_text reference R6 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 640 (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.625) (end -1 -0.625) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.625) (end 1 -0.625) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.625) (end 1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.625) (end -1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -0.227064 0.735) (end 0.227064 0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (pad 2 smd roundrect (at 0.9125 0) (size 1.025 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.243902) (net 1 GND)) (pad 1 smd roundrect (at -0.9125 0) (size 1.025 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.243902) (net 56 "Net-(R5-Pad2)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0805_2012Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 60D271A6) (at 51.73 22.02) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags resistor) (path /60DFC18C) (attr smd) (fp_text reference R5 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 10k (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.625) (end -1 -0.625) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.625) (end 1 -0.625) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.625) (end 1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.625) (end -1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -0.227064 0.735) (end 0.227064 0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (pad 2 smd roundrect (at 0.9125 0) (size 1.025 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.243902) (net 56 "Net-(R5-Pad2)")) (pad 1 smd roundrect (at -0.9125 0) (size 1.025 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.243902) (net 46 VBUS)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Inductor_SMD:L_0805_2012Metric (layer F.Cu) (tedit 5F68FEF0) (tstamp 60D27135) (at 47.25 21.92) (descr "Inductor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 80, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags inductor) (path /611985F2) (attr smd) (fp_text reference L1 (at 0 -1.55) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 33u (at 0 1.55) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.45) (end -1 -0.45) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.45) (end 1 -0.45) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.45) (end 1 0.45) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.45) (end -1 0.45) (layer F.Fab) (width 0.1)) (fp_line (start -0.399622 -0.56) (end 0.399622 -0.56) (layer F.SilkS) (width 0.12)) (fp_line (start -0.399622 0.56) (end 0.399622 0.56) (layer F.SilkS) (width 0.12)) (fp_line (start -1.75 0.85) (end -1.75 -0.85) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.75 -0.85) (end 1.75 -0.85) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.75 -0.85) (end 1.75 0.85) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.75 0.85) (end -1.75 0.85) (layer F.CrtYd) (width 0.05)) (pad 2 smd roundrect (at 1.0625 0) (size 0.875 1.2) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 4 +3V3)) (pad 1 smd roundrect (at -1.0625 0) (size 0.875 1.2) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 50 "Net-(L1-Pad1)")) (model ${KISYS3DMOD}/Inductor_SMD.3dshapes/L_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0805_2012Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 60D26F38) (at 47.2 24.8) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags capacitor) (path /610FDC96) (attr smd) (fp_text reference C3 (at 0 -1.68) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 1u (at 0 1.68) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.625) (end -1 -0.625) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.625) (end 1 -0.625) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.625) (end 1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.625) (end -1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start -0.261252 -0.735) (end 0.261252 -0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -0.261252 0.735) (end 0.261252 0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -1.7 0.98) (end -1.7 -0.98) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.7 -0.98) (end 1.7 -0.98) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.7 -0.98) (end 1.7 0.98) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.7 0.98) (end -1.7 0.98) (layer F.CrtYd) (width 0.05)) (pad 2 smd roundrect (at 0.95 0) (size 1 1.45) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 1 smd roundrect (at -0.95 0) (size 1 1.45) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 52 "Net-(C3-Pad1)")) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm (layer F.Cu) (tedit 5E476F32) (tstamp 60D25FA6) (at 88.705001 -0.274999) (descr "TSSOP, 20 Pin (JEDEC MO-153 Var AC https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py") (tags "TSSOP SO") (path /60C28EC4) (attr smd) (fp_text reference U5 (at 0 -4.2) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value STM32F030F4Px (at 0 4.2) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 0 3.385) (end 2.2 3.385) (layer F.SilkS) (width 0.12)) (fp_line (start 0 3.385) (end -2.2 3.385) (layer F.SilkS) (width 0.12)) (fp_line (start 0 -3.385) (end 2.2 -3.385) (layer F.SilkS) (width 0.12)) (fp_line (start 0 -3.385) (end -3.6 -3.385) (layer F.SilkS) (width 0.12)) (fp_line (start -1.2 -3.25) (end 2.2 -3.25) (layer F.Fab) (width 0.1)) (fp_line (start 2.2 -3.25) (end 2.2 3.25) (layer F.Fab) (width 0.1)) (fp_line (start 2.2 3.25) (end -2.2 3.25) (layer F.Fab) (width 0.1)) (fp_line (start -2.2 3.25) (end -2.2 -2.25) (layer F.Fab) (width 0.1)) (fp_line (start -2.2 -2.25) (end -1.2 -3.25) (layer F.Fab) (width 0.1)) (fp_line (start -3.85 -3.5) (end -3.85 3.5) (layer F.CrtYd) (width 0.05)) (fp_line (start -3.85 3.5) (end 3.85 3.5) (layer F.CrtYd) (width 0.05)) (fp_line (start 3.85 3.5) (end 3.85 -3.5) (layer F.CrtYd) (width 0.05)) (fp_line (start 3.85 -3.5) (end -3.85 -3.5) (layer F.CrtYd) (width 0.05)) (pad 20 smd roundrect (at 2.8625 -2.925) (size 1.475 0.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 44 /SWCLK)) (pad 19 smd roundrect (at 2.8625 -2.275) (size 1.475 0.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 45 /SWDIO)) (pad 18 smd roundrect (at 2.8625 -1.625) (size 1.475 0.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 3 /SEL)) (pad 17 smd roundrect (at 2.8625 -0.975) (size 1.475 0.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 /OE)) (pad 16 smd roundrect (at 2.8625 -0.325) (size 1.475 0.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 4 +3V3)) (pad 15 smd roundrect (at 2.8625 0.325) (size 1.475 0.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 14 smd roundrect (at 2.8625 0.975) (size 1.475 0.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)) (pad 13 smd roundrect (at 2.8625 1.625) (size 1.475 0.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)) (pad 12 smd roundrect (at 2.8625 2.275) (size 1.475 0.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)) (pad 11 smd roundrect (at 2.8625 2.925) (size 1.475 0.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)) (pad 10 smd roundrect (at -2.8625 2.925) (size 1.475 0.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)) (pad 9 smd roundrect (at -2.8625 2.275) (size 1.475 0.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)) (pad 8 smd roundrect (at -2.8625 1.625) (size 1.475 0.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 54 /EN2)) (pad 7 smd roundrect (at -2.8625 0.975) (size 1.475 0.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 55 /EN1)) (pad 6 smd roundrect (at -2.8625 0.325) (size 1.475 0.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 49 "Net-(R4-Pad2)")) (pad 5 smd roundrect (at -2.8625 -0.325) (size 1.475 0.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 4 +3V3)) (pad 4 smd roundrect (at -2.8625 -0.975) (size 1.475 0.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 43 /NRST)) (pad 3 smd roundrect (at -2.8625 -1.625) (size 1.475 0.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 41 /CRY1)) (pad 2 smd roundrect (at -2.8625 -2.275) (size 1.475 0.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 42 /CRY0)) (pad 1 smd roundrect (at -2.8625 -2.925) (size 1.475 0.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)) (model ${KISYS3DMOD}/Package_SO.3dshapes/TSSOP-20_4.4x6.5mm_P0.65mm.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module VQFN20:VQFN20RKS (layer F.Cu) (tedit 60C28C33) (tstamp 60D25F51) (at 86.28 6.7) (path /60B75CDB) (attr smd) (fp_text reference U4 (at 0 0.5) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value HD3SS3212 (at 0 -0.5) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 0 smd roundrect (at 0 0) (size 1 3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 5 smd roundrect (at -1.15 -0.25 90) (size 0.25 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 4 smd roundrect (at -1.15 -0.75 90) (size 0.25 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 38 /ORX2-)) (pad 3 smd roundrect (at -1.15 -1.25 90) (size 0.25 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 36 /ORX2+)) (pad 2 smd roundrect (at -1.15 -1.75 90) (size 0.25 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 /OE)) (pad 1 smd roundrect (at -0.25 -2.15) (size 0.25 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)) (pad 20 smd roundrect (at 0.25 -2.15) (size 0.25 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 19 smd roundrect (at 1.15 -1.75 90) (size 0.25 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 15 /I1TX2+)) (pad 18 smd roundrect (at 1.15 -1.25 90) (size 0.25 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 16 /I1TX2-)) (pad 17 smd roundrect (at 1.15 -0.75 90) (size 0.25 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 17 /I1RX2+)) (pad 16 smd roundrect (at 1.15 -0.25 90) (size 0.25 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 18 /I1RX2-)) (pad 15 smd roundrect (at 1.15 0.25 90) (size 0.25 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 23 /I2TX2+)) (pad 14 smd roundrect (at 1.15 0.75 90) (size 0.25 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 22 /I2TX2-)) (pad 13 smd roundrect (at 1.15 1.25 90) (size 0.25 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 24 /I2RX2+)) (pad 12 smd roundrect (at 1.15 1.75 90) (size 0.25 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 26 /I2RX2-)) (pad 11 smd roundrect (at 0.25 2.15) (size 0.25 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 10 smd roundrect (at -0.25 2.15) (size 0.25 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)) (pad 9 smd roundrect (at -1.15 1.75 90) (size 0.25 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 3 /SEL)) (pad 8 smd roundrect (at -1.15 1.25 90) (size 0.25 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 32 /OTX2-)) (pad 7 smd roundrect (at -1.15 0.75 90) (size 0.25 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 33 /OTX2+)) (pad 6 smd roundrect (at -1.15 0.25 90) (size 0.25 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 4 +3V3)) ) (module VQFN20:VQFN20RKS (layer F.Cu) (tedit 60C28C33) (tstamp 60C2AB53) (at 109.982 29.972 270) (path /60BC22D8) (attr smd) (fp_text reference U3 (at 0 0.5 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value HD3SS3212 (at 0 -0.5 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 0 smd roundrect (at 0 0 270) (size 1 3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 5 smd roundrect (at -1.15 -0.25) (size 0.25 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 4 smd roundrect (at -1.15 -0.75) (size 0.25 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 30 /ORX1-)) (pad 3 smd roundrect (at -1.15 -1.25) (size 0.25 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 29 /ORX1+)) (pad 2 smd roundrect (at -1.15 -1.75) (size 0.25 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 /OE)) (pad 1 smd roundrect (at -0.25 -2.15 270) (size 0.25 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)) (pad 20 smd roundrect (at 0.25 -2.15 270) (size 0.25 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 19 smd roundrect (at 1.15 -1.75) (size 0.25 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 11 /I1TX1+)) (pad 18 smd roundrect (at 1.15 -1.25) (size 0.25 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 12 /I1TX1-)) (pad 17 smd roundrect (at 1.15 -0.75) (size 0.25 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 13 /I1RX1+)) (pad 16 smd roundrect (at 1.15 -0.25) (size 0.25 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 14 /I1RX1-)) (pad 15 smd roundrect (at 1.15 0.25) (size 0.25 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 28 /I2TX1+)) (pad 14 smd roundrect (at 1.15 0.75) (size 0.25 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 27 /I2TX1-)) (pad 13 smd roundrect (at 1.15 1.25) (size 0.25 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 19 /I2RX1+)) (pad 12 smd roundrect (at 1.15 1.75) (size 0.25 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 20 /I2RX1-)) (pad 11 smd roundrect (at 0.25 2.15 270) (size 0.25 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 10 smd roundrect (at -0.25 2.15 270) (size 0.25 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)) (pad 9 smd roundrect (at -1.15 1.75) (size 0.25 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 3 /SEL)) (pad 8 smd roundrect (at -1.15 1.25) (size 0.25 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 39 /OTX1-)) (pad 7 smd roundrect (at -1.15 0.75) (size 0.25 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 40 /OTX1+)) (pad 6 smd roundrect (at -1.15 0.25) (size 0.25 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 4 +3V3)) ) (module Package_DFN_QFN:TDFN-10-1EP_2x3mm_P0.5mm_EP0.9x2mm (layer F.Cu) (tedit 5EABFF35) (tstamp 60C03CD9) (at 129.286 31.242 270) (descr "TDFN, 10 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0429.PDF), generated with kicad-footprint-generator ipc_noLead_generator.py") (tags "TDFN NoLead") (path /60FB33F7) (attr smd) (fp_text reference U1 (at 0 -2.45 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value MAX17501AxTB (at 0 2.45 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start 0 -1.61) (end 1 -1.61) (layer F.SilkS) (width 0.12)) (fp_line (start -1 1.61) (end 1 1.61) (layer F.SilkS) (width 0.12)) (fp_line (start -0.5 -1.5) (end 1 -1.5) (layer F.Fab) (width 0.1)) (fp_line (start 1 -1.5) (end 1 1.5) (layer F.Fab) (width 0.1)) (fp_line (start 1 1.5) (end -1 1.5) (layer F.Fab) (width 0.1)) (fp_line (start -1 1.5) (end -1 -1) (layer F.Fab) (width 0.1)) (fp_line (start -1 -1) (end -0.5 -1.5) (layer F.Fab) (width 0.1)) (fp_line (start -1.62 -1.75) (end -1.62 1.75) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.62 1.75) (end 1.62 1.75) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.62 1.75) (end 1.62 -1.75) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.62 -1.75) (end -1.62 -1.75) (layer F.CrtYd) (width 0.05)) (pad "" smd roundrect (at 0 0.5 270) (size 0.73 0.81) (layers F.Paste) (roundrect_rratio 0.25)) (pad "" smd roundrect (at 0 -0.5 270) (size 0.73 0.81) (layers F.Paste) (roundrect_rratio 0.25)) (pad 11 smd rect (at 0 0 270) (size 0.9 2) (layers F.Cu F.Mask) (net 1 GND)) (pad 10 smd roundrect (at 1.0125 -1 270) (size 0.725 0.25) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 50 "Net-(L1-Pad1)")) (pad 9 smd roundrect (at 1.0125 -0.5 270) (size 0.725 0.25) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 8 smd roundrect (at 1.0125 0 270) (size 0.725 0.25) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)) (pad 7 smd roundrect (at 1.0125 0.5 270) (size 0.725 0.25) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)) (pad 6 smd roundrect (at 1.0125 1 270) (size 0.725 0.25) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 51 "Net-(C2-Pad1)")) (pad 5 smd roundrect (at -1.0125 1 270) (size 0.725 0.25) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 4 +3V3)) (pad 4 smd roundrect (at -1.0125 0.5 270) (size 0.725 0.25) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 52 "Net-(C3-Pad1)")) (pad 3 smd roundrect (at -1.0125 0 270) (size 0.725 0.25) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 53 "Net-(R1-Pad2)")) (pad 2 smd roundrect (at -1.0125 -0.5 270) (size 0.725 0.25) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 46 VBUS)) (pad 1 smd roundrect (at -1.0125 -1 270) (size 0.725 0.25) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (model ${KISYS3DMOD}/Package_DFN_QFN.3dshapes/TDFN-10-1EP_2x3mm_P0.5mm_EP0.9x2mm.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0805_2012Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 60D260EA) (at 96.085001 3.195001) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags resistor) (path /60CE78F9) (attr smd) (fp_text reference R4 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 10k (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.625) (end -1 -0.625) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.625) (end 1 -0.625) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.625) (end 1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.625) (end -1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -0.227064 0.735) (end 0.227064 0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (pad 2 smd roundrect (at 0.9125 0) (size 1.025 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.243902) (net 49 "Net-(R4-Pad2)")) (pad 1 smd roundrect (at -0.9125 0) (size 1.025 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.243902) (net 4 +3V3)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0805_2012Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 60D2611A) (at 90.435001 8.575001) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags resistor) (path /60E2A6FD) (attr smd) (fp_text reference R3 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 10k (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.625) (end -1 -0.625) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.625) (end 1 -0.625) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.625) (end 1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.625) (end -1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -0.227064 0.735) (end 0.227064 0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (pad 2 smd roundrect (at 0.9125 0) (size 1.025 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.243902) (net 43 /NRST)) (pad 1 smd roundrect (at -0.9125 0) (size 1.025 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.243902) (net 4 +3V3)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_USB:USB_C_Receptacle_Amphenol_12401548E4-2A (layer F.Cu) (tedit 5A142044) (tstamp 60D3070C) (at 93 43.8) (descr "USB TYPE C, RA RCPT PCB, Hybrid, https://www.amphenolcanada.com/StockAvailabilityPrice.aspx?From=&PartNum=12401548E4%7e2A") (tags "USB C Type-C Receptacle Hybrid") (path /60B32129) (attr smd) (fp_text reference J4 (at 0 -6.36) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value USB_C_Receptacle (at 0 6.14) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 1 1) (thickness 0.1))) ) (fp_line (start -5.39 5.73) (end -5.39 -5.87) (layer F.CrtYd) (width 0.05)) (fp_line (start 5.39 5.73) (end -5.39 5.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 5.39 -5.87) (end 5.39 5.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -5.39 -5.87) (end 5.39 -5.87) (layer F.CrtYd) (width 0.05)) (fp_line (start 4.6 5.23) (end 4.6 -5.22) (layer F.Fab) (width 0.1)) (fp_line (start -4.6 5.23) (end 4.6 5.23) (layer F.Fab) (width 0.1)) (fp_line (start 3.25 -5.37) (end 4.75 -5.37) (layer F.SilkS) (width 0.12)) (fp_line (start 4.75 -5.37) (end 4.75 1.89) (layer F.SilkS) (width 0.12)) (fp_line (start -4.75 -5.37) (end -4.75 1.89) (layer F.SilkS) (width 0.12)) (fp_line (start -4.75 -5.37) (end -3.25 -5.37) (layer F.SilkS) (width 0.12)) (fp_line (start -4.6 -5.22) (end 4.6 -5.22) (layer F.Fab) (width 0.1)) (fp_line (start -4.6 5.23) (end -4.6 -5.22) (layer F.Fab) (width 0.1)) (pad B11 thru_hole circle (at -2.4 -3.01) (size 0.65 0.65) (drill 0.4) (layers *.Cu *.Mask) (net 19 /I2RX1+)) (pad B10 thru_hole circle (at -1.6 -3.01) (size 0.65 0.65) (drill 0.4) (layers *.Cu *.Mask) (net 20 /I2RX1-)) (pad B8 thru_hole circle (at -0.8 -3.01) (size 0.65 0.65) (drill 0.4) (layers *.Cu *.Mask) (net 21 /I2SBU2)) (pad B5 thru_hole circle (at 0.8 -3.01) (size 0.65 0.65) (drill 0.4) (layers *.Cu *.Mask)) (pad B3 thru_hole circle (at 1.6 -3.01) (size 0.65 0.65) (drill 0.4) (layers *.Cu *.Mask) (net 22 /I2TX2-)) (pad B2 thru_hole circle (at 2.4 -3.01) (size 0.65 0.65) (drill 0.4) (layers *.Cu *.Mask) (net 23 /I2TX2+)) (pad B12 thru_hole circle (at -2.8 -3.71) (size 0.65 0.65) (drill 0.4) (layers *.Cu *.Mask) (net 1 GND)) (pad B9 thru_hole circle (at -1.2 -3.71) (size 0.65 0.65) (drill 0.4) (layers *.Cu *.Mask) (net 48 "Net-(J4-PadA4)")) (pad B7 thru_hole circle (at -0.4 -3.71) (size 0.65 0.65) (drill 0.4) (layers *.Cu *.Mask) (net 6 /I2D-)) (pad B6 thru_hole circle (at 0.4 -3.71) (size 0.65 0.65) (drill 0.4) (layers *.Cu *.Mask) (net 5 /I2D+)) (pad B4 thru_hole circle (at 1.2 -3.71) (size 0.65 0.65) (drill 0.4) (layers *.Cu *.Mask) (net 48 "Net-(J4-PadA4)")) (pad B1 thru_hole circle (at 2.8 -3.71) (size 0.65 0.65) (drill 0.4) (layers *.Cu *.Mask) (net 1 GND)) (pad "" np_thru_hole circle (at -3.6 -4.36) (size 0.65 0.65) (drill 0.65) (layers *.Cu *.Mask)) (pad "" np_thru_hole oval (at 3.6 -4.36) (size 0.95 0.65) (drill oval 0.95 0.65) (layers *.Cu *.Mask)) (pad S1 thru_hole oval (at -4.49 2.84) (size 0.8 1.4) (drill oval 0.5 1.1) (layers *.Cu *.Mask) (net 1 GND)) (pad S1 thru_hole oval (at 4.49 2.84) (size 0.8 1.4) (drill oval 0.5 1.1) (layers *.Cu *.Mask) (net 1 GND)) (pad S1 thru_hole oval (at 4.13 -3.11) (size 0.8 1.4) (drill oval 0.5 1.1) (layers *.Cu *.Mask) (net 1 GND)) (pad A11 smd rect (at 2.25 -5.02) (size 0.3 0.7) (layers F.Cu F.Paste F.Mask) (net 24 /I2RX2+)) (pad A8 smd rect (at 0.75 -5.02) (size 0.3 0.7) (layers F.Cu F.Paste F.Mask) (net 25 /I2SBU1)) (pad A9 smd rect (at 1.25 -5.02) (size 0.3 0.7) (layers F.Cu F.Paste F.Mask) (net 48 "Net-(J4-PadA4)")) (pad A10 smd rect (at 1.75 -5.02) (size 0.3 0.7) (layers F.Cu F.Paste F.Mask) (net 26 /I2RX2-)) (pad A12 smd rect (at 2.75 -5.02) (size 0.3 0.7) (layers F.Cu F.Paste F.Mask) (net 1 GND)) (pad A7 smd rect (at 0.25 -5.02) (size 0.3 0.7) (layers F.Cu F.Paste F.Mask) (net 6 /I2D-)) (pad A6 smd rect (at -0.25 -5.02) (size 0.3 0.7) (layers F.Cu F.Paste F.Mask) (net 5 /I2D+)) (pad A5 smd rect (at -0.75 -5.02) (size 0.3 0.7) (layers F.Cu F.Paste F.Mask)) (pad A4 smd rect (at -1.25 -5.02) (size 0.3 0.7) (layers F.Cu F.Paste F.Mask) (net 48 "Net-(J4-PadA4)")) (pad A3 smd rect (at -1.75 -5.02) (size 0.3 0.7) (layers F.Cu F.Paste F.Mask) (net 27 /I2TX1-)) (pad A2 smd rect (at -2.25 -5.02) (size 0.3 0.7) (layers F.Cu F.Paste F.Mask) (net 28 /I2TX1+)) (pad A1 smd rect (at -2.75 -5.02) (size 0.3 0.7) (layers F.Cu F.Paste F.Mask) (net 1 GND)) (pad S1 thru_hole oval (at -4.13 -3.11) (size 0.8 1.4) (drill oval 0.5 1.1) (layers *.Cu *.Mask) (net 1 GND)) (model ${KISYS3DMOD}/Connector_USB.3dshapes/USB_C_Receptacle_Amphenol_12401548E4-2A.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_USB:USB_C_Receptacle_Amphenol_12401548E4-2A (layer F.Cu) (tedit 5A142044) (tstamp 60C41884) (at 108 43.2) (descr "USB TYPE C, RA RCPT PCB, Hybrid, https://www.amphenolcanada.com/StockAvailabilityPrice.aspx?From=&PartNum=12401548E4%7e2A") (tags "USB C Type-C Receptacle Hybrid") (path /60B2E10F) (attr smd) (fp_text reference J3 (at 0 -6.36) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value USB_C_Receptacle (at 0 6.14) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 1 1) (thickness 0.1))) ) (fp_line (start -5.39 5.73) (end -5.39 -5.87) (layer F.CrtYd) (width 0.05)) (fp_line (start 5.39 5.73) (end -5.39 5.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 5.39 -5.87) (end 5.39 5.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -5.39 -5.87) (end 5.39 -5.87) (layer F.CrtYd) (width 0.05)) (fp_line (start 4.6 5.23) (end 4.6 -5.22) (layer F.Fab) (width 0.1)) (fp_line (start -4.6 5.23) (end 4.6 5.23) (layer F.Fab) (width 0.1)) (fp_line (start 3.25 -5.37) (end 4.75 -5.37) (layer F.SilkS) (width 0.12)) (fp_line (start 4.75 -5.37) (end 4.75 1.89) (layer F.SilkS) (width 0.12)) (fp_line (start -4.75 -5.37) (end -4.75 1.89) (layer F.SilkS) (width 0.12)) (fp_line (start -4.75 -5.37) (end -3.25 -5.37) (layer F.SilkS) (width 0.12)) (fp_line (start -4.6 -5.22) (end 4.6 -5.22) (layer F.Fab) (width 0.1)) (fp_line (start -4.6 5.23) (end -4.6 -5.22) (layer F.Fab) (width 0.1)) (pad B11 thru_hole circle (at -2.4 -3.01) (size 0.65 0.65) (drill 0.4) (layers *.Cu *.Mask) (net 13 /I1RX1+)) (pad B10 thru_hole circle (at -1.6 -3.01) (size 0.65 0.65) (drill 0.4) (layers *.Cu *.Mask) (net 14 /I1RX1-)) (pad B8 thru_hole circle (at -0.8 -3.01) (size 0.65 0.65) (drill 0.4) (layers *.Cu *.Mask) (net 8 /I1SBU2)) (pad B5 thru_hole circle (at 0.8 -3.01) (size 0.65 0.65) (drill 0.4) (layers *.Cu *.Mask)) (pad B3 thru_hole circle (at 1.6 -3.01) (size 0.65 0.65) (drill 0.4) (layers *.Cu *.Mask) (net 16 /I1TX2-)) (pad B2 thru_hole circle (at 2.4 -3.01) (size 0.65 0.65) (drill 0.4) (layers *.Cu *.Mask) (net 15 /I1TX2+)) (pad B12 thru_hole circle (at -2.8 -3.71) (size 0.65 0.65) (drill 0.4) (layers *.Cu *.Mask) (net 1 GND)) (pad B9 thru_hole circle (at -1.2 -3.71) (size 0.65 0.65) (drill 0.4) (layers *.Cu *.Mask) (net 47 "Net-(J3-PadA4)")) (pad B7 thru_hole circle (at -0.4 -3.71) (size 0.65 0.65) (drill 0.4) (layers *.Cu *.Mask) (net 9 /I1D-)) (pad B6 thru_hole circle (at 0.4 -3.71) (size 0.65 0.65) (drill 0.4) (layers *.Cu *.Mask) (net 7 /I1D+)) (pad B4 thru_hole circle (at 1.2 -3.71) (size 0.65 0.65) (drill 0.4) (layers *.Cu *.Mask) (net 47 "Net-(J3-PadA4)")) (pad B1 thru_hole circle (at 2.8 -3.71) (size 0.65 0.65) (drill 0.4) (layers *.Cu *.Mask) (net 1 GND)) (pad "" np_thru_hole circle (at -3.6 -4.36) (size 0.65 0.65) (drill 0.65) (layers *.Cu *.Mask)) (pad "" np_thru_hole oval (at 3.6 -4.36) (size 0.95 0.65) (drill oval 0.95 0.65) (layers *.Cu *.Mask)) (pad S1 thru_hole oval (at -4.49 2.84) (size 0.8 1.4) (drill oval 0.5 1.1) (layers *.Cu *.Mask) (net 1 GND)) (pad S1 thru_hole oval (at 4.49 2.84) (size 0.8 1.4) (drill oval 0.5 1.1) (layers *.Cu *.Mask) (net 1 GND)) (pad S1 thru_hole oval (at 4.13 -3.11) (size 0.8 1.4) (drill oval 0.5 1.1) (layers *.Cu *.Mask) (net 1 GND)) (pad A11 smd rect (at 2.25 -5.02) (size 0.3 0.7) (layers F.Cu F.Paste F.Mask) (net 17 /I1RX2+)) (pad A8 smd rect (at 0.75 -5.02) (size 0.3 0.7) (layers F.Cu F.Paste F.Mask) (net 10 /I1SBU1)) (pad A9 smd rect (at 1.25 -5.02) (size 0.3 0.7) (layers F.Cu F.Paste F.Mask) (net 47 "Net-(J3-PadA4)")) (pad A10 smd rect (at 1.75 -5.02) (size 0.3 0.7) (layers F.Cu F.Paste F.Mask) (net 18 /I1RX2-)) (pad A12 smd rect (at 2.75 -5.02) (size 0.3 0.7) (layers F.Cu F.Paste F.Mask) (net 1 GND)) (pad A7 smd rect (at 0.25 -5.02) (size 0.3 0.7) (layers F.Cu F.Paste F.Mask) (net 9 /I1D-)) (pad A6 smd rect (at -0.25 -5.02) (size 0.3 0.7) (layers F.Cu F.Paste F.Mask) (net 7 /I1D+)) (pad A5 smd rect (at -0.75 -5.02) (size 0.3 0.7) (layers F.Cu F.Paste F.Mask)) (pad A4 smd rect (at -1.25 -5.02) (size 0.3 0.7) (layers F.Cu F.Paste F.Mask) (net 47 "Net-(J3-PadA4)")) (pad A3 smd rect (at -1.75 -5.02) (size 0.3 0.7) (layers F.Cu F.Paste F.Mask) (net 12 /I1TX1-)) (pad A2 smd rect (at -2.25 -5.02) (size 0.3 0.7) (layers F.Cu F.Paste F.Mask) (net 11 /I1TX1+)) (pad A1 smd rect (at -2.75 -5.02) (size 0.3 0.7) (layers F.Cu F.Paste F.Mask) (net 1 GND)) (pad S1 thru_hole oval (at -4.13 -3.11) (size 0.8 1.4) (drill oval 0.5 1.1) (layers *.Cu *.Mask) (net 1 GND)) (model ${KISYS3DMOD}/Connector_USB.3dshapes/USB_C_Receptacle_Amphenol_12401548E4-2A.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMD (layer F.Cu) (tedit 59FED6E3) (tstamp 60C2AC92) (at 76.4 42) (descr "surface-mounted straight pin header, 2x05, 1.27mm pitch, double rows") (tags "Surface mounted pin header SMD 2x05 1.27mm double row") (path /60D8831D) (attr smd) (fp_text reference J2 (at 0 -4.235) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value Conn_ARM_JTAG_SWD_10 (at 0 4.235) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.705 3.175) (end -1.705 3.175) (layer F.Fab) (width 0.1)) (fp_line (start -1.27 -3.175) (end 1.705 -3.175) (layer F.Fab) (width 0.1)) (fp_line (start -1.705 3.175) (end -1.705 -2.74) (layer F.Fab) (width 0.1)) (fp_line (start -1.705 -2.74) (end -1.27 -3.175) (layer F.Fab) (width 0.1)) (fp_line (start 1.705 -3.175) (end 1.705 3.175) (layer F.Fab) (width 0.1)) (fp_line (start -1.705 -2.74) (end -2.75 -2.74) (layer F.Fab) (width 0.1)) (fp_line (start -2.75 -2.74) (end -2.75 -2.34) (layer F.Fab) (width 0.1)) (fp_line (start -2.75 -2.34) (end -1.705 -2.34) (layer F.Fab) (width 0.1)) (fp_line (start 1.705 -2.74) (end 2.75 -2.74) (layer F.Fab) (width 0.1)) (fp_line (start 2.75 -2.74) (end 2.75 -2.34) (layer F.Fab) (width 0.1)) (fp_line (start 2.75 -2.34) (end 1.705 -2.34) (layer F.Fab) (width 0.1)) (fp_line (start -1.705 -1.47) (end -2.75 -1.47) (layer F.Fab) (width 0.1)) (fp_line (start -2.75 -1.47) (end -2.75 -1.07) (layer F.Fab) (width 0.1)) (fp_line (start -2.75 -1.07) (end -1.705 -1.07) (layer F.Fab) (width 0.1)) (fp_line (start 1.705 -1.47) (end 2.75 -1.47) (layer F.Fab) (width 0.1)) (fp_line (start 2.75 -1.47) (end 2.75 -1.07) (layer F.Fab) (width 0.1)) (fp_line (start 2.75 -1.07) (end 1.705 -1.07) (layer F.Fab) (width 0.1)) (fp_line (start -1.705 -0.2) (end -2.75 -0.2) (layer F.Fab) (width 0.1)) (fp_line (start -2.75 -0.2) (end -2.75 0.2) (layer F.Fab) (width 0.1)) (fp_line (start -2.75 0.2) (end -1.705 0.2) (layer F.Fab) (width 0.1)) (fp_line (start 1.705 -0.2) (end 2.75 -0.2) (layer F.Fab) (width 0.1)) (fp_line (start 2.75 -0.2) (end 2.75 0.2) (layer F.Fab) (width 0.1)) (fp_line (start 2.75 0.2) (end 1.705 0.2) (layer F.Fab) (width 0.1)) (fp_line (start -1.705 1.07) (end -2.75 1.07) (layer F.Fab) (width 0.1)) (fp_line (start -2.75 1.07) (end -2.75 1.47) (layer F.Fab) (width 0.1)) (fp_line (start -2.75 1.47) (end -1.705 1.47) (layer F.Fab) (width 0.1)) (fp_line (start 1.705 1.07) (end 2.75 1.07) (layer F.Fab) (width 0.1)) (fp_line (start 2.75 1.07) (end 2.75 1.47) (layer F.Fab) (width 0.1)) (fp_line (start 2.75 1.47) (end 1.705 1.47) (layer F.Fab) (width 0.1)) (fp_line (start -1.705 2.34) (end -2.75 2.34) (layer F.Fab) (width 0.1)) (fp_line (start -2.75 2.34) (end -2.75 2.74) (layer F.Fab) (width 0.1)) (fp_line (start -2.75 2.74) (end -1.705 2.74) (layer F.Fab) (width 0.1)) (fp_line (start 1.705 2.34) (end 2.75 2.34) (layer F.Fab) (width 0.1)) (fp_line (start 2.75 2.34) (end 2.75 2.74) (layer F.Fab) (width 0.1)) (fp_line (start 2.75 2.74) (end 1.705 2.74) (layer F.Fab) (width 0.1)) (fp_line (start -1.765 -3.235) (end 1.765 -3.235) (layer F.SilkS) (width 0.12)) (fp_line (start -1.765 3.235) (end 1.765 3.235) (layer F.SilkS) (width 0.12)) (fp_line (start -3.09 -3.17) (end -1.765 -3.17) (layer F.SilkS) (width 0.12)) (fp_line (start -1.765 -3.235) (end -1.765 -3.17) (layer F.SilkS) (width 0.12)) (fp_line (start 1.765 -3.235) (end 1.765 -3.17) (layer F.SilkS) (width 0.12)) (fp_line (start -1.765 3.17) (end -1.765 3.235) (layer F.SilkS) (width 0.12)) (fp_line (start 1.765 3.17) (end 1.765 3.235) (layer F.SilkS) (width 0.12)) (fp_line (start -4.3 -3.7) (end -4.3 3.7) (layer F.CrtYd) (width 0.05)) (fp_line (start -4.3 3.7) (end 4.3 3.7) (layer F.CrtYd) (width 0.05)) (fp_line (start 4.3 3.7) (end 4.3 -3.7) (layer F.CrtYd) (width 0.05)) (fp_line (start 4.3 -3.7) (end -4.3 -3.7) (layer F.CrtYd) (width 0.05)) (pad 10 smd rect (at 1.95 2.54) (size 2.4 0.74) (layers F.Cu F.Paste F.Mask) (net 43 /NRST)) (pad 9 smd rect (at -1.95 2.54) (size 2.4 0.74) (layers F.Cu F.Paste F.Mask) (net 1 GND)) (pad 8 smd rect (at 1.95 1.27) (size 2.4 0.74) (layers F.Cu F.Paste F.Mask)) (pad 7 smd rect (at -1.95 1.27) (size 2.4 0.74) (layers F.Cu F.Paste F.Mask)) (pad 6 smd rect (at 1.95 0) (size 2.4 0.74) (layers F.Cu F.Paste F.Mask)) (pad 5 smd rect (at -1.95 0) (size 2.4 0.74) (layers F.Cu F.Paste F.Mask) (net 1 GND)) (pad 4 smd rect (at 1.95 -1.27) (size 2.4 0.74) (layers F.Cu F.Paste F.Mask) (net 44 /SWCLK)) (pad 3 smd rect (at -1.95 -1.27) (size 2.4 0.74) (layers F.Cu F.Paste F.Mask) (net 1 GND)) (pad 2 smd rect (at 1.95 -2.54) (size 2.4 0.74) (layers F.Cu F.Paste F.Mask) (net 45 /SWDIO)) (pad 1 smd rect (at -1.95 -2.54) (size 2.4 0.74) (layers F.Cu F.Paste F.Mask) (net 4 +3V3)) (model ${KISYS3DMOD}/Connector_PinHeader_1.27mm.3dshapes/PinHeader_2x05_P1.27mm_Vertical_SMD.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0805_2012Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 60D26000) (at 95.305001 0.215001) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags capacitor) (path /60E42B64) (attr smd) (fp_text reference C6 (at 0 -1.68) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 30p (at 0 1.68) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.625) (end -1 -0.625) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.625) (end 1 -0.625) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.625) (end 1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.625) (end -1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start -0.261252 -0.735) (end 0.261252 -0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -0.261252 0.735) (end 0.261252 0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -1.7 0.98) (end -1.7 -0.98) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.7 -0.98) (end 1.7 -0.98) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.7 -0.98) (end 1.7 0.98) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.7 0.98) (end -1.7 0.98) (layer F.CrtYd) (width 0.05)) (pad 2 smd roundrect (at 0.95 0) (size 1 1.45) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 1 smd roundrect (at -0.95 0) (size 1 1.45) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 42 /CRY0)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0805_2012Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 60D26030) (at 95.305001 -2.794999) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags capacitor) (path /60E43992) (attr smd) (fp_text reference C5 (at 0 -1.68) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 30p (at 0 1.68) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.625) (end -1 -0.625) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.625) (end 1 -0.625) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.625) (end 1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.625) (end -1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start -0.261252 -0.735) (end 0.261252 -0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -0.261252 0.735) (end 0.261252 0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -1.7 0.98) (end -1.7 -0.98) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.7 -0.98) (end 1.7 -0.98) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.7 -0.98) (end 1.7 0.98) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.7 0.98) (end -1.7 0.98) (layer F.CrtYd) (width 0.05)) (pad 2 smd roundrect (at 0.95 0) (size 1 1.45) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 1 smd roundrect (at -0.95 0) (size 1 1.45) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 41 /CRY1)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_1206_3216Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 60D2614A) (at 91.055001 5.425001) (descr "Capacitor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags capacitor) (path /6111149D) (attr smd) (fp_text reference C4 (at 0 -1.85) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 10u (at 0 1.85) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.8 0.8) (thickness 0.12))) ) (fp_line (start -1.6 0.8) (end -1.6 -0.8) (layer F.Fab) (width 0.1)) (fp_line (start -1.6 -0.8) (end 1.6 -0.8) (layer F.Fab) (width 0.1)) (fp_line (start 1.6 -0.8) (end 1.6 0.8) (layer F.Fab) (width 0.1)) (fp_line (start 1.6 0.8) (end -1.6 0.8) (layer F.Fab) (width 0.1)) (fp_line (start -0.711252 -0.91) (end 0.711252 -0.91) (layer F.SilkS) (width 0.12)) (fp_line (start -0.711252 0.91) (end 0.711252 0.91) (layer F.SilkS) (width 0.12)) (fp_line (start -2.3 1.15) (end -2.3 -1.15) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.3 -1.15) (end 2.3 -1.15) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.3 -1.15) (end 2.3 1.15) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.3 1.15) (end -2.3 1.15) (layer F.CrtYd) (width 0.05)) (pad 2 smd roundrect (at 1.475 0) (size 1.15 1.8) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391) (net 1 GND)) (pad 1 smd roundrect (at -1.475 0) (size 1.15 1.8) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391) (net 4 +3V3)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_1206_3216Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module VQFN20:VQFN20RKS (layer F.Cu) (tedit 60C28C33) (tstamp 60D3091C) (at 101.6 30.226 270) (path /60BE0CC5) (attr smd) (fp_text reference U2 (at -2.4 0 180) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value HD3SS3212 (at 0 -0.5 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 0 smd roundrect (at 0 0 270) (size 1 3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 5 smd roundrect (at -1.15 -0.25) (size 0.25 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 4 smd roundrect (at -1.15 -0.75) (size 0.25 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 34 /OD-)) (pad 3 smd roundrect (at -1.15 -1.25) (size 0.25 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 35 /OD+)) (pad 2 smd roundrect (at -1.15 -1.75) (size 0.25 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 /OE)) (pad 1 smd roundrect (at -0.25 -2.15 270) (size 0.25 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)) (pad 20 smd roundrect (at 0.25 -2.15 270) (size 0.25 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 19 smd roundrect (at 1.15 -1.75) (size 0.25 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 7 /I1D+)) (pad 18 smd roundrect (at 1.15 -1.25) (size 0.25 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 9 /I1D-)) (pad 17 smd roundrect (at 1.15 -0.75) (size 0.25 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 10 /I1SBU1)) (pad 16 smd roundrect (at 1.15 -0.25) (size 0.25 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 8 /I1SBU2)) (pad 15 smd roundrect (at 1.15 0.25) (size 0.25 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 5 /I2D+)) (pad 14 smd roundrect (at 1.15 0.75) (size 0.25 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 6 /I2D-)) (pad 13 smd roundrect (at 1.15 1.25) (size 0.25 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 25 /I2SBU1)) (pad 12 smd roundrect (at 1.15 1.75) (size 0.25 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 21 /I2SBU2)) (pad 11 smd roundrect (at 0.25 2.15 270) (size 0.25 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 10 smd roundrect (at -0.25 2.15 270) (size 0.25 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)) (pad 9 smd roundrect (at -1.15 1.75) (size 0.25 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 3 /SEL)) (pad 8 smd roundrect (at -1.15 1.25) (size 0.25 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 31 /OSBU2)) (pad 7 smd roundrect (at -1.15 0.75) (size 0.25 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 37 /OSBU1)) (pad 6 smd roundrect (at -1.15 0.25) (size 0.25 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 4 +3V3)) ) (module Connector_USB:USB_C_Receptacle_Amphenol_12401548E4-2A (layer F.Cu) (tedit 5A142044) (tstamp 60C3225E) (at 100.33 19.05 180) (descr "USB TYPE C, RA RCPT PCB, Hybrid, https://www.amphenolcanada.com/StockAvailabilityPrice.aspx?From=&PartNum=12401548E4%7e2A") (tags "USB C Type-C Receptacle Hybrid") (path /60B27901) (attr smd) (fp_text reference J1 (at 0.05 0.02) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value USB_C_Receptacle (at 0 6.14) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -5.39 5.73) (end -5.39 -5.87) (layer F.CrtYd) (width 0.05)) (fp_line (start 5.39 5.73) (end -5.39 5.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 5.39 -5.87) (end 5.39 5.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -5.39 -5.87) (end 5.39 -5.87) (layer F.CrtYd) (width 0.05)) (fp_line (start 4.6 5.23) (end 4.6 -5.22) (layer F.Fab) (width 0.1)) (fp_line (start -4.6 5.23) (end 4.6 5.23) (layer F.Fab) (width 0.1)) (fp_line (start 3.25 -5.37) (end 4.75 -5.37) (layer F.SilkS) (width 0.12)) (fp_line (start 4.75 -5.37) (end 4.75 1.89) (layer F.SilkS) (width 0.12)) (fp_line (start -4.75 -5.37) (end -4.75 1.89) (layer F.SilkS) (width 0.12)) (fp_line (start -4.75 -5.37) (end -3.25 -5.37) (layer F.SilkS) (width 0.12)) (fp_line (start -4.6 -5.22) (end 4.6 -5.22) (layer F.Fab) (width 0.1)) (fp_line (start -4.6 5.23) (end -4.6 -5.22) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 1 1) (thickness 0.1))) ) (pad B11 thru_hole circle (at -2.4 -3.01 180) (size 0.65 0.65) (drill 0.4) (layers *.Cu *.Mask) (net 29 /ORX1+)) (pad B10 thru_hole circle (at -1.6 -3.01 180) (size 0.65 0.65) (drill 0.4) (layers *.Cu *.Mask) (net 30 /ORX1-)) (pad B8 thru_hole circle (at -0.8 -3.01 180) (size 0.65 0.65) (drill 0.4) (layers *.Cu *.Mask) (net 31 /OSBU2)) (pad B5 thru_hole circle (at 0.8 -3.01 180) (size 0.65 0.65) (drill 0.4) (layers *.Cu *.Mask)) (pad B3 thru_hole circle (at 1.6 -3.01 180) (size 0.65 0.65) (drill 0.4) (layers *.Cu *.Mask) (net 32 /OTX2-)) (pad B2 thru_hole circle (at 2.4 -3.01 180) (size 0.65 0.65) (drill 0.4) (layers *.Cu *.Mask) (net 33 /OTX2+)) (pad B12 thru_hole circle (at -2.8 -3.71 180) (size 0.65 0.65) (drill 0.4) (layers *.Cu *.Mask) (net 1 GND)) (pad B9 thru_hole circle (at -1.2 -3.71 180) (size 0.65 0.65) (drill 0.4) (layers *.Cu *.Mask) (net 46 VBUS)) (pad B7 thru_hole circle (at -0.4 -3.71 180) (size 0.65 0.65) (drill 0.4) (layers *.Cu *.Mask) (net 34 /OD-)) (pad B6 thru_hole circle (at 0.4 -3.71 180) (size 0.65 0.65) (drill 0.4) (layers *.Cu *.Mask) (net 35 /OD+)) (pad B4 thru_hole circle (at 1.2 -3.71 180) (size 0.65 0.65) (drill 0.4) (layers *.Cu *.Mask) (net 46 VBUS)) (pad B1 thru_hole circle (at 2.8 -3.71 180) (size 0.65 0.65) (drill 0.4) (layers *.Cu *.Mask) (net 1 GND)) (pad "" np_thru_hole circle (at -3.6 -4.36 180) (size 0.65 0.65) (drill 0.65) (layers *.Cu *.Mask)) (pad "" np_thru_hole oval (at 3.6 -4.36 180) (size 0.95 0.65) (drill oval 0.95 0.65) (layers *.Cu *.Mask)) (pad S1 thru_hole oval (at -4.49 2.84 180) (size 0.8 1.4) (drill oval 0.5 1.1) (layers *.Cu *.Mask) (net 1 GND)) (pad S1 thru_hole oval (at 4.49 2.84 180) (size 0.8 1.4) (drill oval 0.5 1.1) (layers *.Cu *.Mask) (net 1 GND)) (pad S1 thru_hole oval (at 4.13 -3.11 180) (size 0.8 1.4) (drill oval 0.5 1.1) (layers *.Cu *.Mask) (net 1 GND)) (pad A11 smd rect (at 2.25 -5.02 180) (size 0.3 0.7) (layers F.Cu F.Paste F.Mask) (net 36 /ORX2+)) (pad A8 smd rect (at 0.75 -5.02 180) (size 0.3 0.7) (layers F.Cu F.Paste F.Mask) (net 37 /OSBU1)) (pad A9 smd rect (at 1.25 -5.02 180) (size 0.3 0.7) (layers F.Cu F.Paste F.Mask) (net 46 VBUS)) (pad A10 smd rect (at 1.75 -5.02 180) (size 0.3 0.7) (layers F.Cu F.Paste F.Mask) (net 38 /ORX2-)) (pad A12 smd rect (at 2.75 -5.02 180) (size 0.3 0.7) (layers F.Cu F.Paste F.Mask) (net 1 GND)) (pad A7 smd rect (at 0.25 -5.02 180) (size 0.3 0.7) (layers F.Cu F.Paste F.Mask) (net 34 /OD-)) (pad A6 smd rect (at -0.25 -5.02 180) (size 0.3 0.7) (layers F.Cu F.Paste F.Mask) (net 35 /OD+)) (pad A5 smd rect (at -0.75 -5.02 180) (size 0.3 0.7) (layers F.Cu F.Paste F.Mask)) (pad A4 smd rect (at -1.25 -5.02 180) (size 0.3 0.7) (layers F.Cu F.Paste F.Mask) (net 46 VBUS)) (pad A3 smd rect (at -1.75 -5.02 180) (size 0.3 0.7) (layers F.Cu F.Paste F.Mask) (net 39 /OTX1-)) (pad A2 smd rect (at -2.25 -5.02 180) (size 0.3 0.7) (layers F.Cu F.Paste F.Mask) (net 40 /OTX1+)) (pad A1 smd rect (at -2.75 -5.02 180) (size 0.3 0.7) (layers F.Cu F.Paste F.Mask) (net 1 GND)) (pad S1 thru_hole oval (at -4.13 -3.11 180) (size 0.8 1.4) (drill oval 0.5 1.1) (layers *.Cu *.Mask) (net 1 GND)) (model ${KISYS3DMOD}/Connector_USB.3dshapes/USB_C_Receptacle_Amphenol_12401548E4-2A.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Crystal:Crystal_HC49-4H_Vertical (layer F.Cu) (tedit 5A1AD3B7) (tstamp 60C2A483) (at 70.52 23.53) (descr "Crystal THT HC-49-4H http://5hertz.com/pdfs/04404_D.pdf") (tags "THT crystalHC-49-4H") (path /60D7318B) (fp_text reference Y1 (at 2.44 -3.525) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value Crystal (at 2.44 3.525) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 8.5 -2.8) (end -3.6 -2.8) (layer F.CrtYd) (width 0.05)) (fp_line (start 8.5 2.8) (end 8.5 -2.8) (layer F.CrtYd) (width 0.05)) (fp_line (start -3.6 2.8) (end 8.5 2.8) (layer F.CrtYd) (width 0.05)) (fp_line (start -3.6 -2.8) (end -3.6 2.8) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.76 2.525) (end 5.64 2.525) (layer F.SilkS) (width 0.12)) (fp_line (start -0.76 -2.525) (end 5.64 -2.525) (layer F.SilkS) (width 0.12)) (fp_line (start -0.56 2) (end 5.44 2) (layer F.Fab) (width 0.1)) (fp_line (start -0.56 -2) (end 5.44 -2) (layer F.Fab) (width 0.1)) (fp_line (start -0.76 2.325) (end 5.64 2.325) (layer F.Fab) (width 0.1)) (fp_line (start -0.76 -2.325) (end 5.64 -2.325) (layer F.Fab) (width 0.1)) (fp_arc (start 5.64 0) (end 5.64 -2.525) (angle 180) (layer F.SilkS) (width 0.12)) (fp_arc (start -0.76 0) (end -0.76 -2.525) (angle -180) (layer F.SilkS) (width 0.12)) (fp_arc (start 5.44 0) (end 5.44 -2) (angle 180) (layer F.Fab) (width 0.1)) (fp_arc (start -0.56 0) (end -0.56 -2) (angle -180) (layer F.Fab) (width 0.1)) (fp_arc (start 5.64 0) (end 5.64 -2.325) (angle 180) (layer F.Fab) (width 0.1)) (fp_arc (start -0.76 0) (end -0.76 -2.325) (angle -180) (layer F.Fab) (width 0.1)) (fp_text user %R (at 2.44 0) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 2 thru_hole circle (at 4.88 0) (size 1.5 1.5) (drill 0.8) (layers *.Cu *.Mask) (net 42 /CRY0)) (pad 1 thru_hole circle (at 0 0) (size 1.5 1.5) (drill 0.8) (layers *.Cu *.Mask) (net 41 /CRY1)) (model ${KISYS3DMOD}/Crystal.3dshapes/Crystal_HC49-4H_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Button_Switch_SMD:SW_SPST_B3S-1000 (layer F.Cu) (tedit 5A02FC95) (tstamp 60C32636) (at 67.6 30.8) (descr "Surface Mount Tactile Switch for High-Density Packaging") (tags "Tactile Switch") (path /60CD299E) (attr smd) (fp_text reference SW1 (at -0.01 -0.14) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value SW_Push (at 0 4.5) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -3 3.3) (end -3 -3.3) (layer F.Fab) (width 0.1)) (fp_line (start 3 3.3) (end -3 3.3) (layer F.Fab) (width 0.1)) (fp_line (start 3 -3.3) (end 3 3.3) (layer F.Fab) (width 0.1)) (fp_line (start -3 -3.3) (end 3 -3.3) (layer F.Fab) (width 0.1)) (fp_circle (center 0 0) (end 1.65 0) (layer F.Fab) (width 0.1)) (fp_line (start 3.15 -1.3) (end 3.15 1.3) (layer F.SilkS) (width 0.12)) (fp_line (start -3.15 3.45) (end -3.15 3.2) (layer F.SilkS) (width 0.12)) (fp_line (start 3.15 3.45) (end -3.15 3.45) (layer F.SilkS) (width 0.12)) (fp_line (start 3.15 3.2) (end 3.15 3.45) (layer F.SilkS) (width 0.12)) (fp_line (start -3.15 1.3) (end -3.15 -1.3) (layer F.SilkS) (width 0.12)) (fp_line (start 3.15 -3.45) (end 3.15 -3.2) (layer F.SilkS) (width 0.12)) (fp_line (start -3.15 -3.45) (end 3.15 -3.45) (layer F.SilkS) (width 0.12)) (fp_line (start -3.15 -3.2) (end -3.15 -3.45) (layer F.SilkS) (width 0.12)) (fp_line (start -5 -3.7) (end -5 3.7) (layer F.CrtYd) (width 0.05)) (fp_line (start 5 -3.7) (end -5 -3.7) (layer F.CrtYd) (width 0.05)) (fp_line (start 5 3.7) (end 5 -3.7) (layer F.CrtYd) (width 0.05)) (fp_line (start -5 3.7) (end 5 3.7) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 -0.14) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 2 smd rect (at 3.975 2.25) (size 1.55 1.3) (layers F.Cu F.Paste F.Mask) (net 1 GND)) (pad 2 smd rect (at -3.975 2.25) (size 1.55 1.3) (layers F.Cu F.Paste F.Mask) (net 1 GND)) (pad 1 smd rect (at 3.975 -2.25) (size 1.55 1.3) (layers F.Cu F.Paste F.Mask) (net 49 "Net-(R4-Pad2)")) (pad 1 smd rect (at -3.975 -2.25) (size 1.55 1.3) (layers F.Cu F.Paste F.Mask) (net 49 "Net-(R4-Pad2)")) (model ${KISYS3DMOD}/Button_Switch_SMD.3dshapes/SW_SPST_B3S-1000.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0805_2012Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 60D2FE5E) (at 78.8 12.6 180) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags resistor) (path /6106D088) (attr smd) (fp_text reference R2 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 866k (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.227064 0.735) (end 0.227064 0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) (layer F.SilkS) (width 0.12)) (fp_line (start 1 0.625) (end -1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.625) (end 1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.625) (end 1 -0.625) (layer F.Fab) (width 0.1)) (fp_line (start -1 0.625) (end -1 -0.625) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (pad 2 smd roundrect (at 0.9125 0 180) (size 1.025 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.243902) (net 1 GND)) (pad 1 smd roundrect (at -0.9125 0 180) (size 1.025 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.243902) (net 53 "Net-(R1-Pad2)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0805_2012Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 60C41963) (at 82.4 12.6) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags resistor) (path /6106AC41) (attr smd) (fp_text reference R1 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 3.32M (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.227064 0.735) (end 0.227064 0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) (layer F.SilkS) (width 0.12)) (fp_line (start 1 0.625) (end -1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.625) (end 1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.625) (end 1 -0.625) (layer F.Fab) (width 0.1)) (fp_line (start -1 0.625) (end -1 -0.625) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (pad 2 smd roundrect (at 0.9125 0) (size 1.025 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.243902) (net 53 "Net-(R1-Pad2)")) (pad 1 smd roundrect (at -0.9125 0) (size 1.025 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.243902) (net 46 VBUS)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0805_2012Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 60C2A77C) (at 74.59 19.17 180) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags capacitor) (path /6110752D) (attr smd) (fp_text reference C2 (at 0 -1.68) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 3300p (at 0 1.68) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.7 0.98) (end -1.7 0.98) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.7 -0.98) (end 1.7 0.98) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.7 -0.98) (end 1.7 -0.98) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.7 0.98) (end -1.7 -0.98) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.261252 0.735) (end 0.261252 0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -0.261252 -0.735) (end 0.261252 -0.735) (layer F.SilkS) (width 0.12)) (fp_line (start 1 0.625) (end -1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.625) (end 1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.625) (end 1 -0.625) (layer F.Fab) (width 0.1)) (fp_line (start -1 0.625) (end -1 -0.625) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (pad 2 smd roundrect (at 0.95 0 180) (size 1 1.45) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 1 smd roundrect (at -0.95 0 180) (size 1 1.45) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 51 "Net-(C2-Pad1)")) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0805_2012Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 60C2A8A0) (at 70.78 19.17) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags capacitor) (path /610FC89C) (attr smd) (fp_text reference C1 (at 0 -1.68) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 1u (at 0 1.68) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.7 0.98) (end -1.7 0.98) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.7 -0.98) (end 1.7 0.98) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.7 -0.98) (end 1.7 -0.98) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.7 0.98) (end -1.7 -0.98) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.261252 0.735) (end 0.261252 0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -0.261252 -0.735) (end 0.261252 -0.735) (layer F.SilkS) (width 0.12)) (fp_line (start 1 0.625) (end -1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.625) (end 1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.625) (end 1 -0.625) (layer F.Fab) (width 0.1)) (fp_line (start -1 0.625) (end -1 -0.625) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (pad 2 smd roundrect (at 0.95 0) (size 1 1.45) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 1 smd roundrect (at -0.95 0) (size 1 1.45) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 46 VBUS)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (segment (start 104.82 21.8) (end 104.46 22.16) (width 0.25) (layer B.Cu) (net 1)) (segment (start 97.58 22.81) (end 97.53 22.76) (width 0.25) (layer F.Cu) (net 1)) (segment (start 97.58 24.07) (end 97.58 22.81) (width 0.25) (layer F.Cu) (net 1)) (segment (start 103.08 22.81) (end 103.13 22.76) (width 0.25) (layer F.Cu) (net 1)) (segment (start 103.08 24.07) (end 103.08 22.81) (width 0.25) (layer F.Cu) (net 1)) (segment (start 105.2 39.42) (end 105.15 39.47) (width 0.25) (layer F.Cu) (net 1)) (segment (start 105.2 38.16) (end 105.2 39.42) (width 0.25) (layer F.Cu) (net 1)) (segment (start 110.7 39.42) (end 110.75 39.47) (width 0.25) (layer F.Cu) (net 1)) (segment (start 110.7 38.16) (end 110.7 39.42) (width 0.25) (layer F.Cu) (net 1)) (segment (start 111.48 39.47) (end 112.08 40.07) (width 0.25) (layer F.Cu) (net 1)) (segment (start 110.75 39.47) (end 111.48 39.47) (width 0.25) (layer F.Cu) (net 1)) (segment (start 104.42 39.47) (end 103.82 40.07) (width 0.25) (layer F.Cu) (net 1)) (segment (start 105.15 39.47) (end 104.42 39.47) (width 0.25) (layer F.Cu) (net 1)) (segment (start 109.75 30.25) (end 110 30) (width 0.25) (layer F.Cu) (net 1)) (segment (start 107.85 30.25) (end 109.75 30.25) (width 0.25) (layer F.Cu) (net 1)) (segment (start 110.25 30.25) (end 110 30) (width 0.25) (layer F.Cu) (net 1) (tstamp 60D3083E)) (segment (start 112.15 30.25) (end 110.25 30.25) (width 0.25) (layer F.Cu) (net 1) (tstamp 60D3083B)) (segment (start 110.25 29.75) (end 110 30) (width 0.25) (layer F.Cu) (net 1) (tstamp 60D3088C)) (segment (start 110.25 28.85) (end 110.25 29.75) (width 0.25) (layer F.Cu) (net 1) (tstamp 60D30889)) (segment (start 101.85 30.25) (end 101.6 30) (width 0.25) (layer F.Cu) (net 1)) (segment (start 103.75 30.25) (end 101.85 30.25) (width 0.25) (layer F.Cu) (net 1)) (segment (start 101.35 30.25) (end 101.6 30) (width 0.25) (layer F.Cu) (net 1)) (segment (start 99.45 30.25) (end 101.35 30.25) (width 0.25) (layer F.Cu) (net 1)) (segment (start 101.85 29.75) (end 101.6 30) (width 0.25) (layer F.Cu) (net 1)) (segment (start 101.85 28.85) (end 101.85 29.75) (width 0.25) (layer F.Cu) (net 1)) (segment (start 90.42 30.25) (end 90.17 30) (width 0.25) (layer F.Cu) (net 1)) (segment (start 92.32 30.25) (end 90.42 30.25) (width 0.25) (layer F.Cu) (net 1)) (segment (start 90.42 29.75) (end 90.17 30) (width 0.25) (layer F.Cu) (net 1)) (segment (start 90.42 28.85) (end 90.42 29.75) (width 0.25) (layer F.Cu) (net 1)) (segment (start 89.92 30.25) (end 90.17 30) (width 0.25) (layer F.Cu) (net 1)) (segment (start 88.02 30.25) (end 89.92 30.25) (width 0.25) (layer F.Cu) (net 1)) (segment (start 96.8 22.76) (end 96.2 22.16) (width 0.25) (layer F.Cu) (net 1)) (segment (start 97.53 22.76) (end 96.8 22.76) (width 0.25) (layer F.Cu) (net 1)) (segment (start 103.86 22.76) (end 104.46 22.16) (width 0.25) (layer F.Cu) (net 1)) (segment (start 103.13 22.76) (end 103.86 22.76) (width 0.25) (layer F.Cu) (net 1)) (segment (start 101.85 27.630746) (end 101.85 28.85) (width 0.25) (layer F.Cu) (net 1)) (segment (start 103.08 26.400746) (end 101.85 27.630746) (width 0.25) (layer F.Cu) (net 1)) (segment (start 103.08 24.07) (end 103.08 26.400746) (width 0.25) (layer F.Cu) (net 1)) (segment (start 74.45 40.93) (end 74.45 42.2) (width 0.25) (layer F.Cu) (net 1) (tstamp 60C41990)) (segment (start 75.9 44.74) (end 74.45 44.74) (width 0.25) (layer F.Cu) (net 1) (tstamp 60C4193C)) (segment (start 75.975001 44.664999) (end 75.9 44.74) (width 0.25) (layer F.Cu) (net 1) (tstamp 60C41948)) (segment (start 75.975001 42.275001) (end 75.975001 44.664999) (width 0.25) (layer F.Cu) (net 1) (tstamp 60C41930)) (segment (start 75.9 42.2) (end 75.975001 42.275001) (width 0.25) (layer F.Cu) (net 1) (tstamp 60C4198D)) (segment (start 74.45 42.2) (end 75.9 42.2) (width 0.25) (layer F.Cu) (net 1) (tstamp 60C41846)) (segment (start 99.08 22.81) (end 99.13 22.76) (width 0.25) (layer F.Cu) (net 46)) (segment (start 99.08 24.07) (end 99.08 22.81) (width 0.25) (layer F.Cu) (net 46)) (segment (start 101.58 22.81) (end 101.53 22.76) (width 0.25) (layer F.Cu) (net 46)) (segment (start 101.58 24.07) (end 101.58 22.81) (width 0.25) (layer F.Cu) (net 46)) (segment (start 109.2 39.42) (end 109.15 39.47) (width 0.25) (layer F.Cu) (net 47)) (segment (start 106.7 39.42) (end 106.75 39.47) (width 0.25) (layer F.Cu) (net 47)) (via (at 81.208681 29.051071) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 2)) (segment (start 80.834752 29.425) (end 81.208681 29.051071) (width 0.25) (layer F.Cu) (net 2)) (segment (start 79.6625 29.425) (end 80.834752 29.425) (width 0.25) (layer F.Cu) (net 2)) (via (at 92.6 29) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 2)) (segment (start 92.548929 29.051071) (end 92.6 29) (width 0.25) (layer B.Cu) (net 2)) (segment (start 81.208681 29.051071) (end 92.548929 29.051071) (width 0.25) (layer B.Cu) (net 2)) (segment (start 92.07 29) (end 91.92 28.85) (width 0.25) (layer F.Cu) (net 2)) (segment (start 92.6 29) (end 92.07 29) (width 0.25) (layer F.Cu) (net 2)) (via (at 98.492892 29.507108) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 2)) (segment (start 93.107108 29.507108) (end 98.492892 29.507108) (width 0.25) (layer F.Cu) (net 2)) (segment (start 92.6 29) (end 93.107108 29.507108) (width 0.25) (layer F.Cu) (net 2)) (segment (start 99.674999 29.525001) (end 99.94999 29.25001) (width 0.25) (layer B.Cu) (net 2)) (segment (start 98.851999 29.525001) (end 99.674999 29.525001) (width 0.25) (layer B.Cu) (net 2)) (segment (start 98.834106 29.507108) (end 98.851999 29.525001) (width 0.25) (layer B.Cu) (net 2)) (segment (start 98.492892 29.507108) (end 98.834106 29.507108) (width 0.25) (layer B.Cu) (net 2)) (segment (start 103.74999 29.25001) (end 104 29) (width 0.25) (layer B.Cu) (net 2)) (via (at 104 29) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 2)) (segment (start 99.94999 29.25001) (end 103.74999 29.25001) (width 0.25) (layer B.Cu) (net 2)) (segment (start 103.5 29) (end 103.35 28.85) (width 0.25) (layer F.Cu) (net 2)) (segment (start 104 29) (end 103.5 29) (width 0.25) (layer F.Cu) (net 2)) (via (at 107.4 29) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 2)) (segment (start 104 29) (end 107.4 29) (width 0.25) (layer F.Cu) (net 2)) (via (at 112.4 29) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 2)) (segment (start 107.4 29) (end 112.4 29) (width 0.25) (layer B.Cu) (net 2)) (segment (start 111.9 29) (end 111.75 28.85) (width 0.25) (layer F.Cu) (net 2)) (segment (start 112.4 29) (end 111.9 29) (width 0.25) (layer F.Cu) (net 2)) (via (at 81 28) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 3)) (segment (start 81 28.175) (end 81 28) (width 0.25) (layer F.Cu) (net 3)) (segment (start 80.4 28.775) (end 81 28.175) (width 0.25) (layer F.Cu) (net 3)) (segment (start 79.6625 28.775) (end 80.4 28.775) (width 0.25) (layer F.Cu) (net 3)) (via (at 87.8 28.326071) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 3)) (segment (start 87.473929 28) (end 87.8 28.326071) (width 0.25) (layer B.Cu) (net 3)) (segment (start 81 28) (end 87.473929 28) (width 0.25) (layer B.Cu) (net 3)) (segment (start 87.896071 28.326071) (end 88.42 28.85) (width 0.25) (layer F.Cu) (net 3)) (segment (start 87.8 28.326071) (end 87.896071 28.326071) (width 0.25) (layer F.Cu) (net 3)) (via (at 93.6 28.725) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 3)) (segment (start 92.801072 27.926072) (end 93.6 28.725) (width 0.25) (layer B.Cu) (net 3)) (segment (start 88.199999 27.926072) (end 92.801072 27.926072) (width 0.25) (layer B.Cu) (net 3)) (segment (start 87.8 28.326071) (end 88.199999 27.926072) (width 0.25) (layer B.Cu) (net 3)) (segment (start 99.125 28.725) (end 99.2 28.8) (width 0.25) (layer F.Cu) (net 3)) (segment (start 93.6 28.725) (end 99.125 28.725) (width 0.25) (layer F.Cu) (net 3)) (segment (start 99.25 28.85) (end 99.2 28.8) (width 0.25) (layer F.Cu) (net 3)) (segment (start 99.85 28.85) (end 99.25 28.85) (width 0.25) (layer F.Cu) (net 3)) (via (at 99.2 28.8) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 3)) (segment (start 99.2 28.8) (end 100.6 28.8) (width 0.25) (layer B.Cu) (net 3)) (via (at 103.820277 27.923455) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 3)) (segment (start 102.943732 28.8) (end 103.820277 27.923455) (width 0.25) (layer B.Cu) (net 3)) (segment (start 100.6 28.8) (end 102.943732 28.8) (width 0.25) (layer B.Cu) (net 3)) (segment (start 108.25 28.55) (end 108.25 28.85) (width 0.25) (layer F.Cu) (net 3)) (segment (start 107.623455 27.923455) (end 108.25 28.55) (width 0.25) (layer F.Cu) (net 3)) (segment (start 103.820277 27.923455) (end 107.623455 27.923455) (width 0.25) (layer F.Cu) (net 3)) (segment (start 73.4875 38.6975) (end 74.45 39.66) (width 0.4) (layer F.Cu) (net 4) (tstamp 60C41945)) (segment (start 73.4875 37.2) (end 73.4875 38.6975) (width 0.4) (layer F.Cu) (net 4) (tstamp 60C4198A)) (segment (start 75.425 35.2625) (end 73.4875 37.2) (width 0.25) (layer F.Cu) (net 4)) (segment (start 75.425 35) (end 75.425 35.2625) (width 0.25) (layer F.Cu) (net 4)) (segment (start 81.368754 30.075) (end 79.6625 30.075) (width 0.4) (layer F.Cu) (net 4)) (segment (start 82.008682 29.435072) (end 81.368754 30.075) (width 0.4) (layer F.Cu) (net 4)) (segment (start 82.008682 27.82468) (end 82.008682 29.435072) (width 0.4) (layer F.Cu) (net 4)) (segment (start 78.782534 26.87499) (end 81.058992 26.87499) (width 0.4) (layer F.Cu) (net 4)) (segment (start 75.425 30.232524) (end 78.782534 26.87499) (width 0.4) (layer F.Cu) (net 4)) (segment (start 81.058992 26.87499) (end 82.008682 27.82468) (width 0.4) (layer F.Cu) (net 4)) (segment (start 75.425 35) (end 75.425 30.232524) (width 0.4) (layer F.Cu) (net 4)) (segment (start 107.775001 37.484999) (end 107.7 37.56) (width 0.25) (layer F.Cu) (net 7)) (segment (start 108.115001 37.484999) (end 107.775001 37.484999) (width 0.25) (layer F.Cu) (net 7)) (segment (start 107.7 37.56) (end 107.7 38.16) (width 0.25) (layer F.Cu) (net 7)) (segment (start 108.4 37.2) (end 108.115001 37.484999) (width 0.25) (layer F.Cu) (net 7)) (segment (start 108.4 36) (end 108.4 37.2) (width 0.25) (layer F.Cu) (net 7)) (via (at 108.4 36) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 7)) (segment (start 107.827359 36) (end 108.4 36) (width 0.2) (layer F.Cu) (net 7)) (segment (start 107.202359 35.375) (end 107.827359 36) (width 0.2) (layer F.Cu) (net 7)) (segment (start 95.8932 35.375) (end 107.202359 35.375) (width 0.2) (layer F.Cu) (net 7)) (segment (start 91.895 31.3768) (end 95.8932 35.375) (width 0.2) (layer F.Cu) (net 7)) (segment (start 91.895 31.175) (end 91.895 31.3768) (width 0.2) (layer F.Cu) (net 7)) (segment (start 91.92 31.15) (end 91.895 31.175) (width 0.2) (layer F.Cu) (net 7)) (segment (start 107.55 39.307998) (end 107.55 39.47) (width 0.25) (layer F.Cu) (net 9)) (segment (start 108.2 38.657998) (end 107.55 39.307998) (width 0.25) (layer F.Cu) (net 9)) (segment (start 108.2 38.16) (end 108.2 38.657998) (width 0.25) (layer F.Cu) (net 9)) (via (at 107.50916 36.8) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 9)) (segment (start 107.50916 39.42916) (end 107.55 39.47) (width 0.25) (layer B.Cu) (net 9)) (segment (start 107.50916 36.8) (end 107.50916 39.42916) (width 0.25) (layer B.Cu) (net 9)) (segment (start 91.445 31.175) (end 91.445 31.5632) (width 0.2) (layer F.Cu) (net 9)) (segment (start 95.7068 35.825) (end 107.015961 35.825) (width 0.2) (layer F.Cu) (net 9)) (segment (start 107.015961 35.825) (end 107.50916 36.318199) (width 0.2) (layer F.Cu) (net 9)) (segment (start 91.445 31.5632) (end 95.7068 35.825) (width 0.2) (layer F.Cu) (net 9)) (segment (start 91.42 31.15) (end 91.445 31.175) (width 0.2) (layer F.Cu) (net 9)) (segment (start 107.50916 36.318199) (end 107.50916 36.8) (width 0.2) (layer F.Cu) (net 9)) (segment (start 104.375 32.506801) (end 104.375 34.786398) (width 0.2) (layer B.Cu) (net 11)) (segment (start 103.325 31.175) (end 103.35 31.15) (width 0.2) (layer F.Cu) (net 11)) (via (at 104.6 31.8) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 11)) (segment (start 104.375 32.025) (end 104.6 31.8) (width 0.25) (layer B.Cu) (net 11)) (segment (start 104.375 32.506801) (end 104.375 32.025) (width 0.25) (layer B.Cu) (net 11)) (segment (start 104.225 32.175) (end 104.6 31.8) (width 0.25) (layer F.Cu) (net 11)) (segment (start 103.4932 32.175) (end 104.225 32.175) (width 0.25) (layer F.Cu) (net 11)) (segment (start 103.35 32.0318) (end 103.4932 32.175) (width 0.25) (layer F.Cu) (net 11)) (segment (start 103.35 31.15) (end 103.35 32.0318) (width 0.25) (layer F.Cu) (net 11)) (segment (start 105.725 36.984998) (end 105.425 36.684998) (width 0.2) (layer F.Cu) (net 11)) (segment (start 105.725 37.609999) (end 105.725 36.984998) (width 0.2) (layer F.Cu) (net 11)) (segment (start 105.7 37.634999) (end 105.725 37.609999) (width 0.2) (layer F.Cu) (net 11)) (segment (start 105.7 38.16) (end 105.7 37.634999) (width 0.2) (layer F.Cu) (net 11)) (via (at 105.425 36.684998) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 11)) (segment (start 105.725 36.136398) (end 104.375 34.786398) (width 0.2) (layer B.Cu) (net 11)) (segment (start 105.725 36.384998) (end 105.725 36.136398) (width 0.2) (layer B.Cu) (net 11)) (segment (start 105.425 36.684998) (end 105.725 36.384998) (width 0.2) (layer B.Cu) (net 11)) (segment (start 102.875 31.175) (end 102.85 31.15) (width 0.2) (layer F.Cu) (net 12)) (segment (start 102.875 32.1932) (end 102.875 31.175) (width 0.2) (layer F.Cu) (net 12)) (segment (start 103.3068 32.625) (end 102.875 32.1932) (width 0.2) (layer F.Cu) (net 12)) (segment (start 104.893199 32.625) (end 103.3068 32.625) (width 0.2) (layer F.Cu) (net 12)) (via (at 105.2 32.8) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 12)) (segment (start 105.2 32.8) (end 104.8 33.2) (width 0.25) (layer B.Cu) (net 12)) (segment (start 104.8 34.574998) (end 104.825 34.599998) (width 0.25) (layer B.Cu) (net 12)) (segment (start 104.8 33.2) (end 104.8 34.574998) (width 0.25) (layer B.Cu) (net 12)) (segment (start 106.175 36.984998) (end 106.475 36.684998) (width 0.2) (layer F.Cu) (net 12)) (segment (start 106.2 37.634999) (end 106.175 37.609999) (width 0.2) (layer F.Cu) (net 12)) (segment (start 106.2 38.16) (end 106.2 37.634999) (width 0.2) (layer F.Cu) (net 12)) (via (at 106.475 36.684998) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 12)) (segment (start 106.175 37.609999) (end 106.175 36.984998) (width 0.2) (layer F.Cu) (net 12)) (segment (start 106.175 35.949998) (end 104.825 34.599998) (width 0.2) (layer B.Cu) (net 12)) (segment (start 106.475 36.684998) (end 106.175 36.384998) (width 0.2) (layer B.Cu) (net 12)) (segment (start 106.175 36.384998) (end 106.175 35.949998) (width 0.2) (layer B.Cu) (net 12)) (segment (start 113.230001 38.829721) (end 113.230001 40.846345) (width 0.2) (layer F.Cu) (net 15)) (segment (start 111.725 37.32472) (end 113.230001 38.829721) (width 0.2) (layer F.Cu) (net 15)) (segment (start 111.725 31.175) (end 111.725 37.32472) (width 0.2) (layer F.Cu) (net 15)) (segment (start 111.75 31.15) (end 111.725 31.175) (width 0.2) (layer F.Cu) (net 15)) (via (at 110.4 41.8) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 15)) (segment (start 110.35 41.75) (end 110.4 41.8) (width 0.25) (layer B.Cu) (net 15)) (segment (start 110.35 40.17) (end 110.35 41.75) (width 0.25) (layer B.Cu) (net 15)) (segment (start 112.276346 41.8) (end 113.230001 40.846345) (width 0.25) (layer F.Cu) (net 15)) (segment (start 110.4 41.8) (end 112.276346 41.8) (width 0.25) (layer F.Cu) (net 15)) (segment (start 112.78001 40.659953) (end 112.369953 41.07001) (width 0.2) (layer F.Cu) (net 16)) (segment (start 112.78001 39.016113) (end 112.78001 40.659953) (width 0.2) (layer F.Cu) (net 16)) (segment (start 111.275 37.511103) (end 112.78001 39.016113) (width 0.2) (layer F.Cu) (net 16)) (segment (start 112.369953 41.07001) (end 112.21179 41.07001) (width 0.2) (layer F.Cu) (net 16)) (segment (start 111.25 31.15) (end 111.275 31.175) (width 0.2) (layer F.Cu) (net 16)) (segment (start 111.275 31.175) (end 111.275 37.511103) (width 0.2) (layer F.Cu) (net 16)) (segment (start 112.21179 41.07001) (end 112.211785 41.070005) (width 0.2) (layer F.Cu) (net 16)) (segment (start 112.211785 41.070005) (end 110.291655 41.070005) (width 0.2) (layer F.Cu) (net 16)) (segment (start 109.55 40.332002) (end 109.55 40.17) (width 0.25) (layer F.Cu) (net 16)) (segment (start 110.288003 41.070005) (end 109.55 40.332002) (width 0.25) (layer F.Cu) (net 16)) (segment (start 110.291655 41.070005) (end 110.288003 41.070005) (width 0.25) (layer F.Cu) (net 16)) (segment (start 110.175 37.609999) (end 110.175 35.1432) (width 0.2) (layer F.Cu) (net 17)) (segment (start 110.2 37.634999) (end 110.175 37.609999) (width 0.2) (layer F.Cu) (net 17)) (segment (start 110.2 38.16) (end 110.2 37.634999) (width 0.2) (layer F.Cu) (net 17)) (segment (start 110.725 31.175) (end 110.75 31.15) (width 0.2) (layer F.Cu) (net 17)) (segment (start 110.725 34.5932) (end 110.725 31.175) (width 0.2) (layer F.Cu) (net 17)) (segment (start 110.175 35.1432) (end 110.725 34.5932) (width 0.2) (layer F.Cu) (net 17)) (segment (start 109.7 37.634999) (end 109.725 37.609999) (width 0.2) (layer F.Cu) (net 18)) (segment (start 109.7 38.16) (end 109.7 37.634999) (width 0.2) (layer F.Cu) (net 18)) (segment (start 109.725 37.609999) (end 109.725 34.9568) (width 0.2) (layer F.Cu) (net 18)) (segment (start 110.275 31.175) (end 110.25 31.15) (width 0.2) (layer F.Cu) (net 18)) (segment (start 110.275 34.4068) (end 110.275 31.175) (width 0.2) (layer F.Cu) (net 18)) (segment (start 109.725 34.9568) (end 110.275 34.4068) (width 0.2) (layer F.Cu) (net 18)) (segment (start 72.85 30.725) (end 73.9375 30.725) (width 0.25) (layer F.Cu) (net 49)) (segment (start 71.575 29.45) (end 72.85 30.725) (width 0.25) (layer F.Cu) (net 49)) (segment (start 71.575 28.55) (end 71.575 29.45) (width 0.25) (layer F.Cu) (net 49)) (segment (start 73.248942 30.725) (end 73.9375 30.725) (width 0.25) (layer F.Cu) (net 49)) (segment (start 72.87499 31.098952) (end 73.248942 30.725) (width 0.25) (layer F.Cu) (net 49)) (segment (start 72.87499 34.27499) (end 72.87499 31.098952) (width 0.25) (layer F.Cu) (net 49)) (segment (start 73.6 35) (end 72.87499 34.27499) (width 0.25) (layer F.Cu) (net 49)) (segment (start 105.625 25.0932) (end 105.625 21.3068) (width 0.2) (layer F.Cu) (net 35)) (segment (start 102.825 27.8932) (end 105.625 25.0932) (width 0.2) (layer F.Cu) (net 35)) (segment (start 102.825 28.825) (end 102.825 27.8932) (width 0.2) (layer F.Cu) (net 35)) (segment (start 102.85 28.85) (end 102.825 28.825) (width 0.2) (layer F.Cu) (net 35)) (segment (start 105.625 21.3068) (end 104.4932 20.175) (width 0.2) (layer F.Cu) (net 35)) (segment (start 104.4932 20.175) (end 103.7068 20.175) (width 0.2) (layer F.Cu) (net 35)) (segment (start 103.7068 20.175) (end 102.8409 21.0409) (width 0.2) (layer F.Cu) (net 35)) (segment (start 102.8409 21.9491) (end 102.73 22.06) (width 0.25) (layer F.Cu) (net 35)) (segment (start 102.8409 21.0409) (end 102.8409 21.9491) (width 0.25) (layer F.Cu) (net 35)) (segment (start 102.35 28.85) (end 102.375 28.825) (width 0.2) (layer F.Cu) (net 34)) (segment (start 105.175 24.9068) (end 105.175 21.4932) (width 0.2) (layer F.Cu) (net 34)) (segment (start 102.375 27.7068) (end 105.175 24.9068) (width 0.2) (layer F.Cu) (net 34)) (segment (start 102.375 28.825) (end 102.375 27.7068) (width 0.2) (layer F.Cu) (net 34)) (via (at 104.164125 20.875) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 34)) (segment (start 102.655381 20.875) (end 104.164125 20.875) (width 0.25) (layer B.Cu) (net 34)) (segment (start 101.93 21.600381) (end 102.655381 20.875) (width 0.25) (layer B.Cu) (net 34)) (segment (start 101.93 22.06) (end 101.93 21.600381) (width 0.25) (layer B.Cu) (net 34)) (segment (start 104.5568 20.875) (end 105.175 21.4932) (width 0.25) (layer F.Cu) (net 34)) (segment (start 104.164125 20.875) (end 104.5568 20.875) (width 0.25) (layer F.Cu) (net 34)) (segment (start 100.20499 21.13499) (end 101.13 22.06) (width 0.25) (layer F.Cu) (net 31)) (segment (start 95.8286 21.13499) (end 100.20499 21.13499) (width 0.25) (layer F.Cu) (net 31)) (segment (start 88.92 28.04359) (end 95.8286 21.13499) (width 0.25) (layer F.Cu) (net 31)) (segment (start 88.92 28.85) (end 88.92 28.04359) (width 0.25) (layer F.Cu) (net 31)) (segment (start 108.775 26.9) (end 108.475 27.2) (width 0.2) (layer B.Cu) (net 39)) (segment (start 108.775 22.8932) (end 108.775 26.9) (width 0.2) (layer B.Cu) (net 39)) (segment (start 105.9068 20.025) (end 108.775 22.8932) (width 0.2) (layer B.Cu) (net 39)) (via (at 108.475 27.2) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 39)) (segment (start 98.555 21.7632) (end 100.2932 20.025) (width 0.2) (layer B.Cu) (net 39)) (segment (start 100.2932 20.025) (end 105.9068 20.025) (width 0.2) (layer B.Cu) (net 39)) (segment (start 98.73 22.06) (end 98.555 21.885) (width 0.2) (layer B.Cu) (net 39)) (segment (start 98.555 21.885) (end 98.555 21.7632) (width 0.2) (layer B.Cu) (net 39)) (segment (start 108.775 28.825) (end 108.75 28.85) (width 0.2) (layer F.Cu) (net 39)) (segment (start 108.475 27.2) (end 108.775 27.5) (width 0.2) (layer F.Cu) (net 39)) (segment (start 108.775 27.5) (end 108.775 28.825) (width 0.2) (layer F.Cu) (net 39)) (segment (start 106.0932 19.575) (end 109.225 22.7068) (width 0.2) (layer B.Cu) (net 40)) (segment (start 109.225 22.7068) (end 109.225 26.9) (width 0.2) (layer B.Cu) (net 40)) (segment (start 109.225 26.9) (end 109.525 27.2) (width 0.2) (layer B.Cu) (net 40)) (segment (start 97.93 22.06) (end 98.105 21.885) (width 0.2) (layer B.Cu) (net 40)) (via (at 109.525 27.2) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 40)) (segment (start 98.105 21.5768) (end 100.1068 19.575) (width 0.2) (layer B.Cu) (net 40)) (segment (start 98.105 21.885) (end 98.105 21.5768) (width 0.2) (layer B.Cu) (net 40)) (segment (start 100.1068 19.575) (end 106.0932 19.575) (width 0.2) (layer B.Cu) (net 40)) (segment (start 109.225 28.825) (end 109.25 28.85) (width 0.2) (layer F.Cu) (net 40)) (segment (start 109.225 27.5) (end 109.225 28.825) (width 0.2) (layer F.Cu) (net 40)) (segment (start 109.525 27.2) (end 109.225 27.5) (width 0.2) (layer F.Cu) (net 40)) (segment (start 90.945 28.3368) (end 91.7068 27.575) (width 0.2) (layer F.Cu) (net 34)) (segment (start 90.92 28.85) (end 90.945 28.825) (width 0.2) (layer F.Cu) (net 34)) (segment (start 90.945 28.825) (end 90.945 28.3368) (width 0.2) (layer F.Cu) (net 34)) (segment (start 91.7068 27.575) (end 98.3068 27.575) (width 0.2) (layer F.Cu) (net 34)) (segment (start 100.08 23.572002) (end 100.08 24.07) (width 0.25) (layer F.Cu) (net 34)) (segment (start 100.73 22.922002) (end 100.08 23.572002) (width 0.25) (layer F.Cu) (net 34)) (segment (start 100.73 22.76) (end 100.73 22.922002) (width 0.25) (layer F.Cu) (net 34)) (segment (start 100.105 24.620001) (end 100.08 24.595001) (width 0.2) (layer F.Cu) (net 34)) (segment (start 100.105 25.7768) (end 100.105 24.620001) (width 0.2) (layer F.Cu) (net 34)) (segment (start 100.08 24.595001) (end 100.08 24.07) (width 0.2) (layer F.Cu) (net 34)) (segment (start 98.3068 27.575) (end 100.105 25.7768) (width 0.2) (layer F.Cu) (net 34)) (segment (start 91.395 28.5232) (end 91.8932 28.025) (width 0.2) (layer F.Cu) (net 35)) (segment (start 91.395 28.825) (end 91.395 28.5232) (width 0.2) (layer F.Cu) (net 35)) (segment (start 91.42 28.85) (end 91.395 28.825) (width 0.2) (layer F.Cu) (net 35)) (segment (start 91.8932 28.025) (end 98.4932 28.025) (width 0.2) (layer F.Cu) (net 35)) (via (at 100.805 25.6) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 35)) (segment (start 99.93 24.725) (end 100.805 25.6) (width 0.25) (layer B.Cu) (net 35)) (segment (start 99.93 22.76) (end 99.93 24.725) (width 0.25) (layer B.Cu) (net 35)) (segment (start 100.58 25.375) (end 100.805 25.6) (width 0.25) (layer F.Cu) (net 35)) (segment (start 100.58 24.07) (end 100.58 25.375) (width 0.25) (layer F.Cu) (net 35)) (segment (start 100.555 24.620001) (end 100.58 24.595001) (width 0.2) (layer F.Cu) (net 35)) (segment (start 98.4932 28.025) (end 100.555 25.9632) (width 0.2) (layer F.Cu) (net 35)) (segment (start 100.555 25.85) (end 100.805 25.6) (width 0.25) (layer F.Cu) (net 35)) (segment (start 100.555 25.9632) (end 100.555 25.85) (width 0.25) (layer F.Cu) (net 35)) (via (at 93 21.275) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 29)) (segment (start 111.25 28.85) (end 111.225 28.825) (width 0.2) (layer F.Cu) (net 29)) (segment (start 111.225 25.5068) (end 104.8932 19.175) (width 0.2) (layer F.Cu) (net 29)) (segment (start 111.225 28.825) (end 111.225 25.5068) (width 0.2) (layer F.Cu) (net 29)) (segment (start 104.8932 19.175) (end 95.7068 19.175) (width 0.2) (layer F.Cu) (net 29)) (segment (start 93.3068 21.575) (end 93.3 21.575) (width 0.2) (layer F.Cu) (net 29)) (segment (start 95.7068 19.175) (end 93.3068 21.575) (width 0.2) (layer F.Cu) (net 29)) (segment (start 93.3 21.575) (end 93 21.275) (width 0.2) (layer F.Cu) (net 29)) (segment (start 95.355633 23.630632) (end 95.779898 23.630632) (width 0.2) (layer B.Cu) (net 29)) (segment (start 93 21.275) (end 95.355633 23.630632) (width 0.2) (layer B.Cu) (net 29)) (via (at 95.779898 23.630632) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 29)) (segment (start 98.030001 24.07) (end 98.08 24.07) (width 0.2) (layer F.Cu) (net 29)) (segment (start 98.030001 24.660001) (end 98.030001 24.07) (width 0.2) (layer F.Cu) (net 29)) (segment (start 97.970001 24.720001) (end 98.030001 24.660001) (width 0.2) (layer F.Cu) (net 29)) (segment (start 96.445002 24.720001) (end 97.970001 24.720001) (width 0.2) (layer F.Cu) (net 29)) (segment (start 95.779898 24.054897) (end 96.445002 24.720001) (width 0.2) (layer F.Cu) (net 29)) (segment (start 95.779898 23.630632) (end 95.779898 24.054897) (width 0.2) (layer F.Cu) (net 29)) (segment (start 89.42 28.85) (end 89.42 28.501978) (width 0.25) (layer F.Cu) (net 37)) (segment (start 89.42 28.18) (end 89.42 28.85) (width 0.25) (layer F.Cu) (net 37)) (segment (start 90.45001 27.14999) (end 89.42 28.18) (width 0.25) (layer F.Cu) (net 37)) (segment (start 98.130756 27.14999) (end 90.45001 27.14999) (width 0.25) (layer F.Cu) (net 37)) (segment (start 99.58 25.700746) (end 98.130756 27.14999) (width 0.25) (layer F.Cu) (net 37)) (segment (start 99.58 24.07) (end 99.58 25.700746) (width 0.25) (layer F.Cu) (net 37)) (segment (start 93.4932 22.025) (end 93.3 22.025) (width 0.2) (layer F.Cu) (net 30)) (segment (start 95.8932 19.625) (end 93.4932 22.025) (width 0.2) (layer F.Cu) (net 30)) (segment (start 93.3 22.025) (end 93 22.325) (width 0.2) (layer F.Cu) (net 30)) (via (at 93 22.325) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 30)) (segment (start 104.7068 19.625) (end 95.8932 19.625) (width 0.2) (layer F.Cu) (net 30)) (segment (start 110.75 28.85) (end 110.775 28.825) (width 0.2) (layer F.Cu) (net 30)) (segment (start 110.775 28.825) (end 110.775 25.6932) (width 0.2) (layer F.Cu) (net 30)) (segment (start 110.775 25.6932) (end 104.7068 19.625) (width 0.2) (layer F.Cu) (net 30)) (segment (start 95.029916 23.990624) (end 95.037434 23.998142) (width 0.2) (layer B.Cu) (net 30)) (segment (start 95.029916 23.941313) (end 95.029916 23.990624) (width 0.2) (layer B.Cu) (net 30)) (segment (start 93.413603 22.325) (end 95.029916 23.941313) (width 0.2) (layer B.Cu) (net 30)) (segment (start 95.037434 23.998142) (end 95.037434 24.373096) (width 0.2) (layer B.Cu) (net 30)) (via (at 95.037434 24.373096) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 30)) (segment (start 93 22.325) (end 93.413603 22.325) (width 0.2) (layer B.Cu) (net 30)) (segment (start 98.530001 24.796384) (end 98.530001 24.119999) (width 0.2) (layer F.Cu) (net 30)) (segment (start 98.530001 24.119999) (end 98.58 24.07) (width 0.2) (layer F.Cu) (net 30)) (segment (start 95.037434 24.373096) (end 95.461699 24.373096) (width 0.2) (layer F.Cu) (net 30)) (segment (start 96.258595 25.169992) (end 98.156393 25.169992) (width 0.2) (layer F.Cu) (net 30)) (segment (start 95.461699 24.373096) (end 96.258595 25.169992) (width 0.2) (layer F.Cu) (net 30)) (segment (start 98.156393 25.169992) (end 98.530001 24.796384) (width 0.2) (layer F.Cu) (net 30)) (segment (start 102.105 24.620001) (end 102.105 25.3768) (width 0.2) (layer F.Cu) (net 31)) (segment (start 102.08 24.595001) (end 102.105 24.620001) (width 0.2) (layer F.Cu) (net 31)) (segment (start 102.08 24.07) (end 102.08 24.595001) (width 0.2) (layer F.Cu) (net 31)) (segment (start 100.375 28.825) (end 100.35 28.85) (width 0.2) (layer F.Cu) (net 31)) (segment (start 100.375 27.1068) (end 100.375 28.825) (width 0.2) (layer F.Cu) (net 31)) (segment (start 102.105 25.3768) (end 100.375 27.1068) (width 0.2) (layer F.Cu) (net 31)) (segment (start 102.555 24.620001) (end 102.555 25.5632) (width 0.2) (layer F.Cu) (net 37)) (segment (start 102.58 24.595001) (end 102.555 24.620001) (width 0.2) (layer F.Cu) (net 37)) (segment (start 102.58 24.07) (end 102.58 24.595001) (width 0.2) (layer F.Cu) (net 37)) (segment (start 100.825 28.825) (end 100.85 28.85) (width 0.2) (layer F.Cu) (net 37)) (segment (start 100.825 27.2932) (end 100.825 28.825) (width 0.2) (layer F.Cu) (net 37)) (segment (start 102.555 25.5632) (end 100.825 27.2932) (width 0.2) (layer F.Cu) (net 37)) (segment (start 69.83 22.84) (end 70.52 23.53) (width 0.25) (layer F.Cu) (net 41)) (segment (start 69.83 19.17) (end 69.83 22.84) (width 0.25) (layer F.Cu) (net 41)) (segment (start 73.248942 28.775) (end 73.9375 28.775) (width 0.25) (layer F.Cu) (net 41)) (segment (start 72.87499 28.401048) (end 73.248942 28.775) (width 0.25) (layer F.Cu) (net 41)) (segment (start 72.87499 25.88499) (end 72.87499 28.401048) (width 0.25) (layer F.Cu) (net 41)) (segment (start 70.52 23.53) (end 72.87499 25.88499) (width 0.25) (layer F.Cu) (net 41)) (segment (start 75.54 23.39) (end 75.4 23.53) (width 0.25) (layer F.Cu) (net 42)) (segment (start 75.54 19.17) (end 75.54 23.39) (width 0.25) (layer F.Cu) (net 42)) (segment (start 74.626058 28.125) (end 73.9375 28.125) (width 0.25) (layer F.Cu) (net 42)) (segment (start 75.4 27.351058) (end 74.626058 28.125) (width 0.25) (layer F.Cu) (net 42)) (segment (start 75.4 23.53) (end 75.4 27.351058) (width 0.25) (layer F.Cu) (net 42)) (segment (start 75.975001 37.862501) (end 75.3125 37.2) (width 0.25) (layer F.Cu) (net 43) (tstamp 60C41984)) (segment (start 76.425009 42.020007) (end 75.975001 41.569999) (width 0.25) (layer F.Cu) (net 43) (tstamp 60C41951)) (segment (start 76.425011 43.700013) (end 76.425009 42.020007) (width 0.25) (layer F.Cu) (net 43) (tstamp 60C4193F)) (segment (start 75.975001 41.569999) (end 75.975001 37.862501) (width 0.25) (layer F.Cu) (net 43) (tstamp 60C41987)) (segment (start 77.464998 44.74) (end 76.425011 43.700013) (width 0.25) (layer F.Cu) (net 43) (tstamp 60C41936)) (segment (start 78.35 44.74) (end 77.464998 44.74) (width 0.25) (layer F.Cu) (net 43) (tstamp 60C41939)) (segment (start 76.9 40.93) (end 78.35 40.93) (width 0.25) (layer F.Cu) (net 44) (tstamp 60C41933)) (segment (start 76.824999 40.854999) (end 76.9 40.93) (width 0.25) (layer F.Cu) (net 44) (tstamp 60C4194B)) (segment (start 76.824999 29.575001) (end 76.824999 40.854999) (width 0.25) (layer F.Cu) (net 44) (tstamp 60C41942)) (segment (start 78.925 27.475) (end 76.824999 29.575001) (width 0.25) (layer F.Cu) (net 44)) (segment (start 79.6625 27.475) (end 78.925 27.475) (width 0.25) (layer F.Cu) (net 44)) (segment (start 78.925 28.125) (end 78.35 28.7) (width 0.25) (layer F.Cu) (net 45)) (segment (start 78.35 28.7) (end 78.35 39.66) (width 0.25) (layer F.Cu) (net 45) (tstamp 60C4194E)) (segment (start 79.6625 28.125) (end 78.925 28.125) (width 0.25) (layer F.Cu) (net 45)) )