-- Copyright (C) 1991-2009 Altera Corporation -- Your use of Altera Corporation's design tools, logic functions -- and other software and tools, and its AMPP partner logic -- functions, and any output files from any of the foregoing -- (including device programming or simulation files), and any -- associated documentation or information are expressly subject -- to the terms and conditions of the Altera Program License -- Subscription Agreement, Altera MegaCore Function License -- Agreement, or other applicable license agreement, including, -- without limitation, that your use is for the sole purpose of -- programming logic devices manufactured by Altera and sold by -- Altera or its authorized distributors. Please refer to the -- applicable agreement for further details. -- -- This is a Quartus II output file. It is for reporting purposes only, and is -- not intended for use as a Quartus II input file. This file cannot be used -- to make Quartus II pin assignments - for instructions on how to make pin -- assignments, please see Quartus II help. --------------------------------------------------------------------------------- --------------------------------------------------------------------------------- -- NC : No Connect. This pin has no internal connection to the device. -- DNU : Do Not Use. This pin MUST NOT be connected. -- VCCINT : Dedicated power pin, which MUST be connected to VCC (2.5V/3.3V). -- VCCIO : Dedicated power pin, which MUST be connected to VCC -- of its bank. -- Bank 1: 3.3V -- Bank 2: 3.3V -- GND : Dedicated ground pin. Dedicated GND pins MUST be connected to GND. -- It can also be used to report unused dedicated pins. The connection -- on the board for unused dedicated pins depends on whether this will -- be used in a future design. One example is device migration. When -- using device migration, refer to the device pin-tables. If it is a -- GND pin in the pin table or if it will not be used in a future design -- for another purpose the it MUST be connected to GND. If it is an unused -- dedicated pin, then it can be connected to a valid signal on the board -- (low, high, or toggling) if that signal is required for a different -- revision of the design. -- GND+ : Unused input pin. It can also be used to report unused dual-purpose pins. -- This pin should be connected to GND. It may also be connected to a -- valid signal on the board (low, high, or toggling) if that signal -- is required for a different revision of the design. -- GND* : Unused I/O pin. For transceiver I/O banks (Bank 13, 14, 15, 16 and 17), -- connect each pin marked GND* either individually through a 10k Ohm resistor -- to GND or tie all pins together and connect through a single 10k Ohm resistor -- to GND. -- For non-transceiver I/O banks, connect each pin marked GND* directly to GND -- or leave it unconnected. -- RESERVED : Unused I/O pin, which MUST be left unconnected. -- RESERVED_INPUT : Pin is tri-stated and should be connected to the board. -- RESERVED_INPUT_WITH_WEAK_PULLUP : Pin is tri-stated with internal weak pull-up resistor. -- RESERVED_INPUT_WITH_BUS_HOLD : Pin is tri-stated with bus-hold circuitry. -- RESERVED_OUTPUT_DRIVEN_HIGH : Pin is output driven high. --------------------------------------------------------------------------------- --------------------------------------------------------------------------------- -- Pin directions (input, output or bidir) are based on device operating in user mode. --------------------------------------------------------------------------------- Quartus II Version 9.0 Build 132 02/25/2009 SJ Full Version CHIP "test" ASSIGNED TO AN: EPM240T100C5 Pin Name/Usage : Location : Dir. : I/O Standard : Voltage : I/O Bank : User Assignment ------------------------------------------------------------------------------------------------------------- led1 : 1 : output : 3.3-V LVTTL : : 2 : Y led2 : 2 : output : 3.3-V LVTTL : : 1 : Y led3 : 3 : output : 3.3-V LVTTL : : 1 : Y clk1M : 4 : input : 3.3-V LVTTL : : 1 : Y GND* : 5 : : : : 1 : GND* : 6 : : : : 1 : GND* : 7 : : : : 1 : GND* : 8 : : : : 1 : VCCIO1 : 9 : power : : 3.3V : 1 : GNDIO : 10 : gnd : : : : GNDINT : 11 : gnd : : : : clkBtn : 12 : input : 3.3-V LVTTL : : 1 : Y VCCINT : 13 : power : : 2.5V/3.3V : : GND* : 14 : : : : 1 : GND* : 15 : : : : 1 : GND* : 16 : : : : 1 : GND* : 17 : : : : 1 : GND* : 18 : : : : 1 : GND* : 19 : : : : 1 : GND* : 20 : : : : 1 : GND* : 21 : : : : 1 : TMS : 22 : input : : : 1 : TDI : 23 : input : : : 1 : TCK : 24 : input : : : 1 : TDO : 25 : output : : : 1 : GND* : 26 : : : : 1 : GND* : 27 : : : : 1 : GND* : 28 : : : : 1 : GND* : 29 : : : : 1 : GND* : 30 : : : : 1 : VCCIO1 : 31 : power : : 3.3V : 1 : GNDIO : 32 : gnd : : : : GND* : 33 : : : : 1 : GND* : 34 : : : : 1 : GND* : 35 : : : : 1 : GND* : 36 : : : : 1 : GND* : 37 : : : : 1 : GND* : 38 : : : : 1 : GND* : 39 : : : : 1 : GND* : 40 : : : : 1 : GND* : 41 : : : : 1 : GND* : 42 : : : : 1 : GND* : 43 : : : : 1 : rstBtn : 44 : input : 3.3-V LVTTL : : 1 : Y VCCIO1 : 45 : power : : 3.3V : 1 : GNDIO : 46 : gnd : : : : GND* : 47 : : : : 1 : GND* : 48 : : : : 1 : GND* : 49 : : : : 1 : GND* : 50 : : : : 1 : GND* : 51 : : : : 1 : GND* : 52 : : : : 2 : GND* : 53 : : : : 2 : GND* : 54 : : : : 2 : GND* : 55 : : : : 2 : GND* : 56 : : : : 2 : GND* : 57 : : : : 2 : GND* : 58 : : : : 2 : VCCIO2 : 59 : power : : 3.3V : 2 : GNDIO : 60 : gnd : : : : GND* : 61 : : : : 2 : GND* : 62 : : : : 2 : VCCINT : 63 : power : : 2.5V/3.3V : : GND* : 64 : : : : 2 : GNDINT : 65 : gnd : : : : GND* : 66 : : : : 2 : GND* : 67 : : : : 2 : GND* : 68 : : : : 2 : GND* : 69 : : : : 2 : GND* : 70 : : : : 2 : GND* : 71 : : : : 2 : GND* : 72 : : : : 2 : GND* : 73 : : : : 2 : GND* : 74 : : : : 2 : GND* : 75 : : : : 2 : GND* : 76 : : : : 2 : GND* : 77 : : : : 2 : GND* : 78 : : : : 2 : GNDIO : 79 : gnd : : : : VCCIO2 : 80 : power : : 3.3V : 2 : GND* : 81 : : : : 2 : GND* : 82 : : : : 2 : GND* : 83 : : : : 2 : GND* : 84 : : : : 2 : GND* : 85 : : : : 2 : GND* : 86 : : : : 2 : GND* : 87 : : : : 2 : GND* : 88 : : : : 2 : GND* : 89 : : : : 2 : GND* : 90 : : : : 2 : GND* : 91 : : : : 2 : GND* : 92 : : : : 2 : GNDIO : 93 : gnd : : : : VCCIO2 : 94 : power : : 3.3V : 2 : GND* : 95 : : : : 2 : GND* : 96 : : : : 2 : GND* : 97 : : : : 2 : GND* : 98 : : : : 2 : GND* : 99 : : : : 2 : GND* : 100 : : : : 2 :