# EverestOS Version 1.6

=========================================
Device : Pixel 8 pro
Codename : Husky
Build Type : STABLE (Gapps)
Maintainer : Libra420T
=========================================

# EverestOS Version 1.6 EOL (17-September-2024)

- September Firmware
- latest Source Changes
- Notification Panel
  (Cleaner Aesthetics)
- New Wallpaper
- Ship Pixel Launcher as Default 
  (Still User Choice)
- Updated ViPER4AndroidFX
- Updated Lawnchair
- Updated Gapps
- Added SystemUI Reboot
- Fixed Wifi Calling
  (Fully Functional while Airplane Mode is ON)
- Fixed Battery mAh not showing via about phone card
- Fixed Freeform


# EverestOS Version 1.5 (28-August-2024)

- Initial Release
- latest Source Changes
- Updated CarrierSettings
- enable VoLTE, VoWiFi & 5G for non-supported countries
- Added QuickSwitch for launcher choice (via BaseCamp)
- Updated firmware from AP2A.240805.005
- Added ViperFX



=================
# Flashing guide: 
=================

--First Time Install--
(Note: These releases include recovery firmware)
1. Download boot, dtbo, vendor_kernel_boot, vendor_boot & rom
2. Reboot to bootloader
3. fastboot flash boot boot.img
   fastboot flash dtbo dtbo.img
   fastboot flash vendor_kernel_boot vendor_kernel_boot.img
   fastboot flash vendor_boot vendor_boot.img
   fastboot reboot recovery
4. While in recovery, navigate to Factory reset -> Format data/factory reset and confirm to format the device.
5. When done formatting, go back to the main menu and then navigate to Apply update -> Apply from ADB
6. adb sideload rom.zip (replace "rom" with actual filename)
7 (optional). Reboot to recovery (fully) to sideload any add-ons (e.g magisk)
8. Reboot to system

Update
1. Reboot to recovery
2. While in recovery, navigate to Apply update -> Apply from ADB
3. adb sideload rom.zip (replace "rom" with actual filename)
4 (optional). Reboot to recovery to sideload any add-ons (e.g magisk)
5. Reboot to system

OTA
1. Check for update. If available, select "Download and install" (approx 10-15 min)