Device: Redmi Note 5 Pro
Device code name : whyred
Device maintainer: Arijit Saha

Date - 02/07/2025
=================
- Synced with latest source
- Switch to uclamp
- task_profiles: rework for better performance
- init: enable sched_walt_rotate_big_tasks
- power: use more advanced cgroup/task profile
- Rework on lmk props
- kernel: Do not add -cip and st to LOCALVERSION
- Kernel: Switch to uclamp
- Kernel: Update fastcharge value upto 3500mah
- Implement torch light control
- Adapt LED nodes for whyred
- Add support for bypass charging
- sepolicy: Address bypass charging denials
- Many more underhood changes

Date - 13/06/2025
=================
- Synced with latest source
- Updated kernel
- Drop fastcharge hal

Date - 08/06/2025
=================
- Synced with latest source
- Added Xiaomi Dolby & v4a
- Miui Camera available
- Enable FM Radio without headset support
- Enable full ART optimizations with VDEX/ODEX

Date - 27/05/2025
=================
- Synced with latest source
- Set camera override format from reserved via soong config
- Switch to open source sound trigger hal
- Use AOSP USB audio configs
- Unlocked additional camera framerates
- Add ViPER4AndroidFX Redesign
- Unset explicit 'resource_dirs' declaration
- Move Lineage Health HAL to select()
- Use QCOM implementation for audio effects
- Disable DRC audio
- Inherit non_ab_device.mk
- Drop product_launched_with_*.mk
- Import vibration pattern from curtana
- Remove TARGET_VENDOR_PRODUCT_NAME
- Switch to AIDL USB HAL
- AOSP WFD doesn't support protected Wi-Fi Display buffers so dropped it
- Build required Wi-fi Interfaces
- Update IMS permissions in permissions-qti.xml
- Add net_raw permissions for time_daemon service
- Correct rmt_storage Service Name
- Disable alpha compositing in WM
- Don't pin camera app in memory
- Remove obsolete rfs_access service
- Remove useless nqnfcinfo service
- Set default wifi country code to '00'
- Change permissions for /dev/diag
- Increase 5 GHz network signal tolerance
- Inherit userspace_reboot.mk
- Use the new auto network selection UI
- Fix SBC/AAC A2DP offload
- Extend buffer size to 256kb for offload playback
- Sync boot image header with stock
- Drop HMP Specific Kernel CMD Line.Because we are now using EAS
- Update SELinux boot error
- Give proper permissions for /dev/diag
- Import more surface flinger flags
- keylayout: Map Button Jack keylayout to fix headset button controls
- Use QTI USB 1.3 HAL
- Migrate to QTI USB Gadget 1.2 HIDL
- Enable UVC support on sdm660
- Switch to AIDL thermal HAL
- build deviceaswebcam
- Add usbd servicemanager permission
- Add DeviceAsWebcam overlay
- Set TARGET_USES_YCRCB_VENUS_CAMERA_ENCODE
- Use emulated storage
- Switch to AIDL USB GADGET hal
- Switch to USB 1.3-basic HAL
- Many more underhood changes and optimizations

Date - 08/05/2025
=================
- Synced with latest source
- Updated apn configs

Date - 03/05/2025
=================
- Synced with latest source

Date - 20/04/2025
=================
- Synced with latest source

Date - 17/04/2025
=================
- Synced with latest source
- Switch to latest southwest kernel
- Fixed various crashes on boot
- Many more underhood changes

Date - 05/04/2025
=================
- Initial qpr2 release
- Dropped soundtrigger HIDL
- Dropped device settings & miui camera
- Bump manifest target-level to 6
- Update tetheroffload to version 1.1
- Enabled WPA3-SAE authentication
- Moved wifioverlay to vendor
- Add parts based dirac
- Disabled checkelfs
- Uprev some vintf entry
- Set correct channel mask
- Switched to southwest kernel
- Imptoved touch responsiveness
- Improved charging speed for indian variant
- Improved idle drain
- Many more underhood changes

Date - 17/02/2025
=================
- Synced with latest source
- Switched to san kernel
- Increased zram
- Enabled zram writeback
- Dropped low memory killer
- Switched to QTI health AIDL service
- Switched to QTI memtrack AIDL hal
- Added recovery check for Dynamic Partitions
- Cleanup qti_whitelist
- Many more underhood changes

Date - 15/02/2025
=================
- Synced with latest source
- Fixed mtp/sdcard issue
- Many more underhood changes

Date - 10/02/2025 
=================
•Initial release