# This config is not used, it's here just for reference.
# The sno-seed image will have the ptp operator but not its config.
apiVersion: ptp.openshift.io/v1
kind: PtpConfig
metadata:
  name: du-ptp-slave
  namespace: openshift-ptp
  annotations:
    ran.openshift.io/ztp-deploy-wave: "10"
spec:
  profile:
  - interface: enp4s0
    name: slave
    ptp4lOpts: "-2 -s -A --clientOnly=1 --step_threshold=0.1"
    # ptp4lOpts  -A --clientOnly=1 --step_threshold=0.1 are required for this
    # lab environment running on virtual hardware
    # phc2sysOpts should have -a, and instead we have to specify clock device manually (-s)
    phc2sysOpts: -r -n 24 -s /dev/ptp0
    ptp4lConf: |
      [global]
      #
      # Default Data Set
      #
      twoStepFlag 1
      slaveOnly 1
      priority1 128
      priority2 128
      domainNumber 24
      #utc_offset 37
      clockClass 255
      clockAccuracy 0xFE
      offsetScaledLogVariance 0xFFFF
      free_running 0
      freq_est_interval 1
      dscp_event 0
      dscp_general 0
      dataset_comparison G.8275.x
      G.8275.defaultDS.localPriority 128
      #
      # Port Data Set
      #
      logAnnounceInterval -3
      logSyncInterval -4
      logMinDelayReqInterval -4
      logMinPdelayReqInterval -4
      announceReceiptTimeout 3
      syncReceiptTimeout 0
      delayAsymmetry 0
      fault_reset_interval -4
      neighborPropDelayThresh 20000000
      masterOnly 0
      G.8275.portDS.localPriority 128
      #
      # Run time options
      #
      assume_two_step 0
      logging_level 6
      path_trace_enabled 0
      follow_up_info 0
      hybrid_e2e 0
      inhibit_multicast_service 0
      net_sync_monitor 0
      tc_spanning_tree 0
      tx_timestamp_timeout 50
      unicast_listen 0
      unicast_master_table 0
      unicast_req_duration 3600
      use_syslog 1
      verbose 0
      summary_interval 0
      kernel_leap 1
      check_fup_sync 0
      #clock_class_threshold 7 -> we use threshold 248 since GM doesn't have a GPS source
      clock_class_threshold 248
      #
      # Servo Options
      #
      pi_proportional_const 0.0
      pi_integral_const 0.0
      pi_proportional_scale 0.0
      pi_proportional_exponent -0.3
      pi_proportional_norm_max 0.7
      pi_integral_scale 0.0
      pi_integral_exponent 0.4
      pi_integral_norm_max 0.3
      step_threshold 2.0
      first_step_threshold 0.00002
      max_frequency 900000000
      clock_servo pi
      sanity_freq_limit 200000000
      ntpshm_segment 0
      #
      # Transport options
      #
      transportSpecific 0x0
      ptp_dst_mac 01:1B:19:00:00:00
      p2p_dst_mac 01:80:C2:00:00:0E
      udp_ttl 1
      udp6_scope 0x0E
      uds_address /var/run/ptp4l
      #
      # Default interface options
      #
      clock_type OC
      network_transport L2
      delay_mechanism E2E
      time_stamping software
      tsproc_mode filter
      delay_filter moving_median
      delay_filter_length 10
      egressLatency 0
      ingressLatency 0
      boundary_clock_jbod 0
      #
      # Clock description
      #
      productDescription ;;
      revisionData ;;
      manufacturerIdentity 00:00:00
      userDescription ;
      timeSource 0xA0
    ptpSchedulingPolicy: SCHED_FIFO
    ptpSchedulingPriority: 10
    ptpSettings:
      logReduce: "true"
    daemonNodeSelector:
      node-role.kubernetes.io/master: ""
  recommend:
  - match:
    - nodeLabel: node-role.kubernetes.io/master
    priority: 4
    profile: slave
---
apiVersion: ptp.openshift.io/v1
kind: PtpOperatorConfig
metadata:
  name: default
  namespace: openshift-ptp
  annotations:
    ran.openshift.io/ztp-deploy-wave: "10"
spec:
  daemonNodeSelector:
    node-role.kubernetes.io/master: ""