(kicad_pcb (version 20171130) (host pcbnew "(5.1.12)-1") (general (thickness 1.6) (drawings 4) (tracks 0) (zones 0) (modules 45) (nets 51) ) (page A4) (layers (0 F.Cu signal) (31 B.Cu signal) (32 B.Adhes user) (33 F.Adhes user) (34 B.Paste user) (35 F.Paste user) (36 B.SilkS user) (37 F.SilkS user) (38 B.Mask user) (39 F.Mask user) (40 Dwgs.User user) (41 Cmts.User user) (42 Eco1.User user) (43 Eco2.User user) (44 Edge.Cuts user) (45 Margin user) (46 B.CrtYd user) (47 F.CrtYd user) (48 B.Fab user hide) (49 F.Fab user hide) ) (setup (last_trace_width 0.25) (user_trace_width 0.5) (user_trace_width 1) (user_trace_width 2) (trace_clearance 0.2) (zone_clearance 0.2) (zone_45_only no) (trace_min 0.2) (via_size 0.8) (via_drill 0.4) (via_min_size 0.4) (via_min_drill 0.3) (uvia_size 0.3) (uvia_drill 0.1) (uvias_allowed no) (uvia_min_size 0.2) (uvia_min_drill 0.1) (edge_width 0.05) (segment_width 0.2) (pcb_text_width 0.3) (pcb_text_size 1.5 1.5) (mod_edge_width 0.12) (mod_text_size 1 1) (mod_text_width 0.15) (pad_size 4.4 4.4) (pad_drill 2.2) (pad_to_mask_clearance 0) (aux_axis_origin 0 0) (visible_elements 7FFFBF7F) (pcbplotparams (layerselection 0x010fc_ffffffff) (usegerberextensions true) (usegerberattributes false) (usegerberadvancedattributes false) (creategerberjobfile false) (excludeedgelayer true) (linewidth 0.100000) (plotframeref false) (viasonmask false) (mode 1) (useauxorigin false) (hpglpennumber 1) (hpglpenspeed 20) (hpglpendiameter 15.000000) (psnegative false) (psa4output false) (plotreference true) (plotvalue false) (plotinvisibletext false) (padsonsilk false) (subtractmaskfromsilk true) (outputformat 1) (mirror false) (drillshape 0) (scaleselection 1) (outputdirectory "Jlcpcb")) ) (net 0 "") (net 1 +BATT) (net 2 "Net-(BT1-Pad2)") (net 3 +5V) (net 4 "Net-(BZ1-Pad2)") (net 5 GND) (net 6 /KEY) (net 7 +3V3) (net 8 "Net-(D1-Pad1)") (net 9 "Net-(D1-Pad2)") (net 10 /P2.0) (net 11 /P1.5) (net 12 /P1.4) (net 13 /P1.3) (net 14 /P1.2) (net 15 /P1.1) (net 16 /P1.0) (net 17 /P0.7) (net 18 /CAPTURE0) (net 19 /CAPTURE1) (net 20 /CAPTURE2) (net 21 /RESET) (net 22 /DC) (net 23 /DD) (net 24 "Net-(L1-Pad1)") (net 25 "Net-(Q2-Pad1)") (net 26 "Net-(R1-Pad2)") (net 27 "Net-(R2-Pad2)") (net 28 /BAT_ADC) (net 29 /BUZZER) (net 30 /EXT_LOAD) (net 31 "Net-(U2-Pad4)") (net 32 "Net-(C3-Pad2)") (net 33 "Net-(C4-Pad1)") (net 34 "Net-(D2-Pad2)") (net 35 /LED) (net 36 "Net-(R5-Pad2)") (net 37 "Net-(R11-Pad2)") (net 38 "Net-(EXT1-Pad1)") (net 39 "Net-(U2-Pad1)") (net 40 "Net-(U2-Pad5)") (net 41 "Net-(U3-Pad4)") (net 42 "Net-(U4-Pad9)") (net 43 "Net-(U4-Pad8)") (net 44 /P1.6) (net 45 "Net-(P1-PadA6)") (net 46 "Net-(P1-PadB5)") (net 47 "Net-(P1-PadA8)") (net 48 "Net-(P1-PadA7)") (net 49 "Net-(P1-PadA5)") (net 50 "Net-(P1-PadB8)") (net_class Default "Это класс цепей по умолчанию." (clearance 0.2) (trace_width 0.25) (via_dia 0.8) (via_drill 0.4) (uvia_dia 0.3) (uvia_drill 0.1) (add_net +3V3) (add_net +5V) (add_net +BATT) (add_net /BAT_ADC) (add_net /BUZZER) (add_net /CAPTURE0) (add_net /CAPTURE1) (add_net /CAPTURE2) (add_net /DC) (add_net /DD) (add_net /EXT_LOAD) (add_net /KEY) (add_net /LED) (add_net /P0.7) (add_net /P1.0) (add_net /P1.1) (add_net /P1.2) (add_net /P1.3) (add_net /P1.4) (add_net /P1.5) (add_net /P1.6) (add_net /P2.0) (add_net /RESET) (add_net GND) (add_net "Net-(BT1-Pad2)") (add_net "Net-(BZ1-Pad2)") (add_net "Net-(C3-Pad2)") (add_net "Net-(C4-Pad1)") (add_net "Net-(D1-Pad1)") (add_net "Net-(D1-Pad2)") (add_net "Net-(D2-Pad2)") (add_net "Net-(EXT1-Pad1)") (add_net "Net-(L1-Pad1)") (add_net "Net-(P1-PadA5)") (add_net "Net-(P1-PadA6)") (add_net "Net-(P1-PadA7)") (add_net "Net-(P1-PadA8)") (add_net "Net-(P1-PadB5)") (add_net "Net-(P1-PadB8)") (add_net "Net-(Q2-Pad1)") (add_net "Net-(R1-Pad2)") (add_net "Net-(R11-Pad2)") (add_net "Net-(R2-Pad2)") (add_net "Net-(R5-Pad2)") (add_net "Net-(U2-Pad1)") (add_net "Net-(U2-Pad4)") (add_net "Net-(U2-Pad5)") (add_net "Net-(U3-Pad4)") (add_net "Net-(U4-Pad8)") (add_net "Net-(U4-Pad9)") ) (module Button_Switch_SMD:SW_SPST_TL3342 (layer B.Cu) (tedit 5A02FC95) (tstamp 62AB751E) (at 101.346 96.647 180) (descr "Low-profile SMD Tactile Switch, https://www.e-switch.com/system/asset/product_line/data_sheet/165/TL3342.pdf") (tags "SPST Tactile Switch") (path /629FAF4A) (attr smd) (fp_text reference SW1 (at 0 0 180) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value SW_Push (at 0 -3.75 180) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_circle (center 0 0) (end 1 0) (layer B.Fab) (width 0.1)) (fp_line (start -4.25 -3) (end -4.25 3) (layer B.CrtYd) (width 0.05)) (fp_line (start 4.25 -3) (end -4.25 -3) (layer B.CrtYd) (width 0.05)) (fp_line (start 4.25 3) (end 4.25 -3) (layer B.CrtYd) (width 0.05)) (fp_line (start -4.25 3) (end 4.25 3) (layer B.CrtYd) (width 0.05)) (fp_line (start -1.2 2.6) (end -2.6 1.2) (layer B.Fab) (width 0.1)) (fp_line (start 1.2 2.6) (end -1.2 2.6) (layer B.Fab) (width 0.1)) (fp_line (start 2.6 1.2) (end 1.2 2.6) (layer B.Fab) (width 0.1)) (fp_line (start 2.6 -1.2) (end 2.6 1.2) (layer B.Fab) (width 0.1)) (fp_line (start 1.2 -2.6) (end 2.6 -1.2) (layer B.Fab) (width 0.1)) (fp_line (start -1.2 -2.6) (end 1.2 -2.6) (layer B.Fab) (width 0.1)) (fp_line (start -2.6 -1.2) (end -1.2 -2.6) (layer B.Fab) (width 0.1)) (fp_line (start -2.6 1.2) (end -2.6 -1.2) (layer B.Fab) (width 0.1)) (fp_line (start -1.25 2.75) (end 1.25 2.75) (layer B.SilkS) (width 0.12)) (fp_line (start -2.75 1) (end -2.75 -1) (layer B.SilkS) (width 0.12)) (fp_line (start -1.25 -2.75) (end 1.25 -2.75) (layer B.SilkS) (width 0.12)) (fp_line (start 2.75 1) (end 2.75 -1) (layer B.SilkS) (width 0.12)) (fp_line (start -2 -1) (end -2 1) (layer B.Fab) (width 0.1)) (fp_line (start -1 -2) (end -2 -1) (layer B.Fab) (width 0.1)) (fp_line (start 1 -2) (end -1 -2) (layer B.Fab) (width 0.1)) (fp_line (start 2 -1) (end 1 -2) (layer B.Fab) (width 0.1)) (fp_line (start 2 1) (end 2 -1) (layer B.Fab) (width 0.1)) (fp_line (start 1 2) (end 2 1) (layer B.Fab) (width 0.1)) (fp_line (start -1 2) (end 1 2) (layer B.Fab) (width 0.1)) (fp_line (start -2 1) (end -1 2) (layer B.Fab) (width 0.1)) (fp_line (start -1.7 2.3) (end -1.25 2.75) (layer B.SilkS) (width 0.12)) (fp_line (start 1.7 2.3) (end 1.25 2.75) (layer B.SilkS) (width 0.12)) (fp_line (start 1.7 -2.3) (end 1.25 -2.75) (layer B.SilkS) (width 0.12)) (fp_line (start -1.7 -2.3) (end -1.25 -2.75) (layer B.SilkS) (width 0.12)) (fp_line (start 3.2 -1.6) (end 2.2 -1.6) (layer B.Fab) (width 0.1)) (fp_line (start 2.7 -2.1) (end 2.7 -1.6) (layer B.Fab) (width 0.1)) (fp_line (start 1.7 -2.1) (end 3.2 -2.1) (layer B.Fab) (width 0.1)) (fp_line (start -1.7 -2.1) (end -3.2 -2.1) (layer B.Fab) (width 0.1)) (fp_line (start -3.2 -1.6) (end -2.2 -1.6) (layer B.Fab) (width 0.1)) (fp_line (start -2.7 -2.1) (end -2.7 -1.6) (layer B.Fab) (width 0.1)) (fp_line (start -3.2 1.6) (end -2.2 1.6) (layer B.Fab) (width 0.1)) (fp_line (start -1.7 2.1) (end -3.2 2.1) (layer B.Fab) (width 0.1)) (fp_line (start -2.7 2.1) (end -2.7 1.6) (layer B.Fab) (width 0.1)) (fp_line (start 3.2 1.6) (end 2.2 1.6) (layer B.Fab) (width 0.1)) (fp_line (start 1.7 2.1) (end 3.2 2.1) (layer B.Fab) (width 0.1)) (fp_line (start 2.7 2.1) (end 2.7 1.6) (layer B.Fab) (width 0.1)) (fp_line (start -3.2 2.1) (end -3.2 1.6) (layer B.Fab) (width 0.1)) (fp_line (start -3.2 -2.1) (end -3.2 -1.6) (layer B.Fab) (width 0.1)) (fp_line (start 3.2 2.1) (end 3.2 1.6) (layer B.Fab) (width 0.1)) (fp_line (start 3.2 -2.1) (end 3.2 -1.6) (layer B.Fab) (width 0.1)) (fp_text user %R (at 0 3.75 180) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (pad 1 smd rect (at -3.15 1.9 180) (size 1.7 1) (layers B.Cu B.Paste B.Mask) (net 26 "Net-(R1-Pad2)")) (pad 1 smd rect (at 3.15 1.9 180) (size 1.7 1) (layers B.Cu B.Paste B.Mask) (net 26 "Net-(R1-Pad2)")) (pad 2 smd rect (at -3.15 -1.9 180) (size 1.7 1) (layers B.Cu B.Paste B.Mask) (net 6 /KEY)) (pad 2 smd rect (at 3.15 -1.9 180) (size 1.7 1) (layers B.Cu B.Paste B.Mask) (net 6 /KEY)) (model ${KISYS3DMOD}/Button_Switch_SMD.3dshapes/SW_SPST_TL3342.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Battery:BatteryHolder_Blossom_1042_1x18650 (layer B.Cu) (tedit 62ACA913) (tstamp 62AD098E) (at 132.715 111.887) (descr "Battery holder for 18650 cylindrical cells http://www.keyelco.com/product.cfm/product_id/918") (tags "18650 Keystone 1042 Li-ion") (path /629F95F0) (attr smd) (fp_text reference BT1 (at 0 11.5) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value BAT (at 0 -11.3) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_line (start -42.5 4.75) (end -42.5 7.25) (layer B.SilkS) (width 0.12)) (fp_line (start -43.75 6) (end -41.25 6) (layer B.SilkS) (width 0.12)) (fp_line (start -39.03 -3.68) (end -43.5 -3.68) (layer B.CrtYd) (width 0.05)) (fp_line (start -43.5 -3.68) (end -43.5 3.68) (layer B.CrtYd) (width 0.05)) (fp_line (start -43.5 3.68) (end -39.03 3.68) (layer B.CrtYd) (width 0.05)) (fp_line (start 43.5 3.68) (end 39.03 3.68) (layer B.CrtYd) (width 0.05)) (fp_line (start 39.03 -3.68) (end 43.5 -3.68) (layer B.CrtYd) (width 0.05)) (fp_line (start -39.03 10.83) (end -39.03 3.68) (layer B.CrtYd) (width 0.05)) (fp_line (start -39.03 -10.83) (end -39.03 -3.68) (layer B.CrtYd) (width 0.05)) (fp_line (start 39.03 10.83) (end 39.03 3.68) (layer B.CrtYd) (width 0.05)) (fp_line (start -39.03 10.83) (end 39.03 10.83) (layer B.CrtYd) (width 0.05)) (fp_line (start -39.03 -10.83) (end 39.03 -10.83) (layer B.CrtYd) (width 0.05)) (fp_line (start 38.53 10.33) (end 38.53 -10.33) (layer B.Fab) (width 0.1)) (fp_line (start -33.3675 10.33) (end 38.53 10.33) (layer B.Fab) (width 0.1)) (fp_line (start 43.75 6) (end 41.25 6) (layer B.SilkS) (width 0.12)) (fp_line (start -38.53 5.1675) (end -38.53 -10.33) (layer B.Fab) (width 0.1)) (fp_line (start -38.53 -10.33) (end 38.53 -10.33) (layer B.Fab) (width 0.1)) (fp_line (start 38.64 3.44) (end 38.64 10.42) (layer B.SilkS) (width 0.12)) (fp_line (start 38.64 10.44) (end -38.64 10.44) (layer B.SilkS) (width 0.12)) (fp_line (start -38.64 10.44) (end -38.64 3.44) (layer B.SilkS) (width 0.12)) (fp_line (start 38.64 -3.44) (end 38.64 -10.44) (layer B.SilkS) (width 0.12)) (fp_line (start 38.64 -10.44) (end -38.64 -10.44) (layer B.SilkS) (width 0.12)) (fp_line (start -38.64 -10.44) (end -38.64 -3.44) (layer B.SilkS) (width 0.12)) (fp_line (start 39.03 -10.83) (end 39.03 -3.68) (layer B.CrtYd) (width 0.05)) (fp_line (start 43.5 -3.68) (end 43.5 3.68) (layer B.CrtYd) (width 0.05)) (fp_line (start -38.64 3.44) (end -43 3.44) (layer B.SilkS) (width 0.12)) (fp_line (start -33.3675 10.33) (end -38.53 5.1675) (layer B.Fab) (width 0.1)) (fp_text user %R (at 0 0) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (pad 1 smd rect (at -39.33 0) (size 7.34 6.35) (layers B.Cu B.Paste B.Mask) (net 1 +BATT)) (pad 2 smd rect (at 39.33 0) (size 7.34 6.35) (layers B.Cu B.Paste B.Mask) (net 2 "Net-(BT1-Pad2)")) (pad "" np_thru_hole circle (at -35.93 8) (size 2.39 2.39) (drill 2.39) (layers *.Cu *.Mask)) ) (module Buzzer_Beeper:MLT-9032 (layer F.Cu) (tedit 62AF0D0F) (tstamp 62AF676C) (at 145.8595 115.8875 90) (path /62B001E4) (fp_text reference BZ1 (at -3.6195 5.08 180) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value Buzzer (at 0 -7.874 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 2.3368 -0.5334) (end 2.3368 0.5588) (layer F.SilkS) (width 0.05)) (fp_line (start 1.757034 0.0254) (end 2.916566 0.0254) (layer F.SilkS) (width 0.05)) (fp_circle (center 2.3368 0.0254) (end 2.916566 0.0254) (layer F.SilkS) (width 0.05)) (fp_line (start 2.590799 3.682999) (end 2.5908 6.096) (layer F.SilkS) (width 0.12)) (fp_line (start -2.591306 3.701864) (end -2.5908 6.096) (layer F.SilkS) (width 0.12)) (fp_line (start -2.5908 6.096) (end 2.5908 6.096) (layer F.SilkS) (width 0.12)) (fp_line (start -2.738787 3.737036) (end -2.7432 6.223) (layer Dwgs.User) (width 0.05)) (fp_line (start 2.7432 3.7338) (end 2.7432 6.223) (layer Dwgs.User) (width 0.05)) (fp_line (start -2.7432 6.223) (end 2.7432 6.223) (layer Dwgs.User) (width 0.05)) (fp_arc (start 0 0) (end 2.590799 3.682999) (angle -44.54449123) (layer F.SilkS) (width 0.12)) (fp_arc (start 0 0) (end -4.444999 0.812799) (angle -44.6455207) (layer F.SilkS) (width 0.12)) (fp_arc (start 0 0) (end 4.444999 -0.812799) (angle -159.2750818) (layer F.SilkS) (width 0.12)) (fp_arc (start 0 0) (end 2.743199 3.733799) (angle -287.5) (layer Dwgs.User) (width 0.05)) (pad 2 smd rect (at -4.1148 0 90) (size 2.2 1.5) (layers F.Cu F.Paste F.Mask) (net 4 "Net-(BZ1-Pad2)")) (pad 1 smd rect (at 4.1656 0 90) (size 2.2 1.5) (layers F.Cu F.Paste F.Mask) (net 1 +BATT)) ) (module Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical (layer F.Cu) (tedit 59FED5CC) (tstamp 62AB73A7) (at 96.901 125.349 90) (descr "Through hole straight pin header, 1x05, 2.54mm pitch, single row") (tags "Through hole pin header THT 1x05 2.54mm single row") (path /62A004F1) (fp_text reference DBG (at 2.413 5.08) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value DEBUG (at 0 12.49 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.8 -1.8) (end -1.8 -1.8) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.8 11.95) (end 1.8 -1.8) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.8 11.95) (end 1.8 11.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.8 -1.8) (end -1.8 11.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.33 -1.33) (end 0 -1.33) (layer F.SilkS) (width 0.12)) (fp_line (start -1.33 0) (end -1.33 -1.33) (layer F.SilkS) (width 0.12)) (fp_line (start -1.33 1.27) (end 1.33 1.27) (layer F.SilkS) (width 0.12)) (fp_line (start 1.33 1.27) (end 1.33 11.49) (layer F.SilkS) (width 0.12)) (fp_line (start -1.33 1.27) (end -1.33 11.49) (layer F.SilkS) (width 0.12)) (fp_line (start -1.33 11.49) (end 1.33 11.49) (layer F.SilkS) (width 0.12)) (fp_line (start -1.27 -0.635) (end -0.635 -1.27) (layer F.Fab) (width 0.1)) (fp_line (start -1.27 11.43) (end -1.27 -0.635) (layer F.Fab) (width 0.1)) (fp_line (start 1.27 11.43) (end -1.27 11.43) (layer F.Fab) (width 0.1)) (fp_line (start 1.27 -1.27) (end 1.27 11.43) (layer F.Fab) (width 0.1)) (fp_line (start -0.635 -1.27) (end 1.27 -1.27) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 5.08) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 1 thru_hole rect (at 0 0 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 5 GND)) (pad 2 thru_hole oval (at 0 2.54 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 21 /RESET)) (pad 3 thru_hole oval (at 0 5.08 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 22 /DC)) (pad 4 thru_hole oval (at 0 7.62 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 23 /DD)) (pad 5 thru_hole oval (at 0 10.16 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 7 +3V3)) (model ${KISYS3DMOD}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x05_P2.54mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Package_TO_SOT_SMD:TO-252-2 (layer F.Cu) (tedit 5A70A390) (tstamp 62B14835) (at 141.605 104.394) (descr "TO-252 / DPAK SMD package, http://www.infineon.com/cms/en/product/packages/PG-TO252/PG-TO252-3-1/") (tags "DPAK TO-252 DPAK-3 TO-252-3 SOT-428") (path /62CE3546) (attr smd) (fp_text reference Q1 (at 0 -4.5) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value Q_NMOS_DGS (at 0 4.5) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 5.55 -3.5) (end -5.55 -3.5) (layer F.CrtYd) (width 0.05)) (fp_line (start 5.55 3.5) (end 5.55 -3.5) (layer F.CrtYd) (width 0.05)) (fp_line (start -5.55 3.5) (end 5.55 3.5) (layer F.CrtYd) (width 0.05)) (fp_line (start -5.55 -3.5) (end -5.55 3.5) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.47 3.18) (end -3.57 3.18) (layer F.SilkS) (width 0.12)) (fp_line (start -2.47 3.45) (end -2.47 3.18) (layer F.SilkS) (width 0.12)) (fp_line (start -0.97 3.45) (end -2.47 3.45) (layer F.SilkS) (width 0.12)) (fp_line (start -2.47 -3.18) (end -5.3 -3.18) (layer F.SilkS) (width 0.12)) (fp_line (start -2.47 -3.45) (end -2.47 -3.18) (layer F.SilkS) (width 0.12)) (fp_line (start -0.97 -3.45) (end -2.47 -3.45) (layer F.SilkS) (width 0.12)) (fp_line (start -4.97 2.655) (end -2.27 2.655) (layer F.Fab) (width 0.1)) (fp_line (start -4.97 1.905) (end -4.97 2.655) (layer F.Fab) (width 0.1)) (fp_line (start -2.27 1.905) (end -4.97 1.905) (layer F.Fab) (width 0.1)) (fp_line (start -4.97 -1.905) (end -2.27 -1.905) (layer F.Fab) (width 0.1)) (fp_line (start -4.97 -2.655) (end -4.97 -1.905) (layer F.Fab) (width 0.1)) (fp_line (start -1.865 -2.655) (end -4.97 -2.655) (layer F.Fab) (width 0.1)) (fp_line (start -1.27 -3.25) (end 3.95 -3.25) (layer F.Fab) (width 0.1)) (fp_line (start -2.27 -2.25) (end -1.27 -3.25) (layer F.Fab) (width 0.1)) (fp_line (start -2.27 3.25) (end -2.27 -2.25) (layer F.Fab) (width 0.1)) (fp_line (start 3.95 3.25) (end -2.27 3.25) (layer F.Fab) (width 0.1)) (fp_line (start 3.95 -3.25) (end 3.95 3.25) (layer F.Fab) (width 0.1)) (fp_line (start 4.95 2.7) (end 3.95 2.7) (layer F.Fab) (width 0.1)) (fp_line (start 4.95 -2.7) (end 4.95 2.7) (layer F.Fab) (width 0.1)) (fp_line (start 3.95 -2.7) (end 4.95 -2.7) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 1 smd rect (at -4.2 -2.28) (size 2.2 1.2) (layers F.Cu F.Paste F.Mask) (net 30 /EXT_LOAD)) (pad 3 smd rect (at -4.2 2.28) (size 2.2 1.2) (layers F.Cu F.Paste F.Mask) (net 5 GND)) (pad 2 smd rect (at 2.1 0) (size 6.4 5.8) (layers F.Cu F.Mask) (net 38 "Net-(EXT1-Pad1)")) (pad "" smd rect (at 3.775 1.525) (size 3.05 2.75) (layers F.Paste)) (pad "" smd rect (at 0.425 -1.525) (size 3.05 2.75) (layers F.Paste)) (pad "" smd rect (at 3.775 -1.525) (size 3.05 2.75) (layers F.Paste)) (pad "" smd rect (at 0.425 1.525) (size 3.05 2.75) (layers F.Paste)) (model ${KISYS3DMOD}/Package_TO_SOT_SMD.3dshapes/TO-252-2.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Inductor_SMD:CD43 (layer F.Cu) (tedit 568A2D8F) (tstamp 62AB73B8) (at 159.004 105.2195 90) (path /62B33355) (attr smd) (fp_text reference L1 (at 0 3.2385 270) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 2.2uH (at 0.0762 -5.3975 270) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_circle (center 0 0) (end 2.25 0) (layer F.Fab) (width 0.15)) (pad 1 smd oval (at -1.625 0 90) (size 1.75 4.5) (layers F.Cu F.Paste F.Mask) (net 24 "Net-(L1-Pad1)")) (pad 2 smd oval (at 1.625 0 90) (size 1.75 4.5) (layers F.Cu F.Paste F.Mask) (net 7 +3V3)) ) (module TerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-2_1x02_P2.54mm_Horizontal (layer B.Cu) (tedit 5B1EC513) (tstamp 62AB738E) (at 144.018 96.774) (descr "Terminal Block TE 282834-2, 2 pins, pitch 2.54mm, size 5.54x6.5mm^2, drill diamater 1.1mm, pad diameter 2.1mm, see http://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F282834%7FC1%7Fpdf%7FEnglish%7FENG_CD_282834_C1.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_TE-Connectivity") (tags "THT Terminal Block TE 282834-2 pitch 2.54mm size 5.54x6.5mm^2 drill 1.1mm pad 2.1mm") (path /62B1C27B) (fp_text reference EXT1 (at 1.27 -2.286) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value "External Load" (at 1.27 -4.37) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_circle (center 0 0) (end 1.1 0) (layer B.Fab) (width 0.1)) (fp_circle (center 2.54 0) (end 3.64 0) (layer B.Fab) (width 0.1)) (fp_line (start -1.5 3.25) (end 4.04 3.25) (layer B.Fab) (width 0.1)) (fp_line (start 4.04 3.25) (end 4.04 -3.25) (layer B.Fab) (width 0.1)) (fp_line (start 4.04 -3.25) (end -1.1 -3.25) (layer B.Fab) (width 0.1)) (fp_line (start -1.1 -3.25) (end -1.5 -2.85) (layer B.Fab) (width 0.1)) (fp_line (start -1.5 -2.85) (end -1.5 3.25) (layer B.Fab) (width 0.1)) (fp_line (start -1.5 -2.85) (end 4.04 -2.85) (layer B.Fab) (width 0.1)) (fp_line (start -1.62 -2.85) (end 4.16 -2.85) (layer B.SilkS) (width 0.12)) (fp_line (start -1.5 2.25) (end 4.04 2.25) (layer B.Fab) (width 0.1)) (fp_line (start -1.62 2.25) (end 4.16 2.25) (layer B.SilkS) (width 0.12)) (fp_line (start -1.62 3.37) (end 4.16 3.37) (layer B.SilkS) (width 0.12)) (fp_line (start -1.62 -3.37) (end 4.16 -3.37) (layer B.SilkS) (width 0.12)) (fp_line (start -1.62 3.37) (end -1.62 -3.37) (layer B.SilkS) (width 0.12)) (fp_line (start 4.16 3.37) (end 4.16 -3.37) (layer B.SilkS) (width 0.12)) (fp_line (start 0.835 0.7) (end -0.701 -0.835) (layer B.Fab) (width 0.1)) (fp_line (start 0.701 0.835) (end -0.835 -0.7) (layer B.Fab) (width 0.1)) (fp_line (start 3.375 0.7) (end 1.84 -0.835) (layer B.Fab) (width 0.1)) (fp_line (start 3.241 0.835) (end 1.706 -0.7) (layer B.Fab) (width 0.1)) (fp_line (start -1.86 -2.97) (end -1.86 -3.61) (layer B.SilkS) (width 0.12)) (fp_line (start -1.86 -3.61) (end -1.46 -3.61) (layer B.SilkS) (width 0.12)) (fp_line (start -2 3.75) (end -2 -3.75) (layer B.CrtYd) (width 0.05)) (fp_line (start -2 -3.75) (end 4.54 -3.75) (layer B.CrtYd) (width 0.05)) (fp_line (start 4.54 -3.75) (end 4.54 3.75) (layer B.CrtYd) (width 0.05)) (fp_line (start 4.54 3.75) (end -2 3.75) (layer B.CrtYd) (width 0.05)) (fp_text user %R (at 1.27 -2) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (pad 2 thru_hole circle (at 2.54 0) (size 2.1 2.1) (drill 1.1) (layers *.Cu *.Mask) (net 5 GND)) (pad 1 thru_hole rect (at 0 0) (size 2.1 2.1) (drill 1.1) (layers *.Cu *.Mask) (net 38 "Net-(EXT1-Pad1)")) (model ${KISYS3DMOD}/TerminalBlock_TE-Connectivity.3dshapes/TerminalBlock_TE_282834-2_1x02_P2.54mm_Horizontal.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 62AB7233) (at 167.259 111.506 180) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags capacitor) (path /62A5B610) (attr smd) (fp_text reference C1 (at -2.54 0) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 1uF (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.14058 -0.51) (end 0.14058 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.14058 0.51) (end 0.14058 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 2 smd roundrect (at 0.775 0 180) (size 0.9 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 3 +5V)) (pad 1 smd roundrect (at -0.775 0 180) (size 0.9 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 5 GND)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 62AB7244) (at 106.299 108.204 180) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags capacitor) (path /62A44144) (attr smd) (fp_text reference C2 (at 2.413 0 180) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 100nF (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.14058 -0.51) (end 0.14058 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.14058 0.51) (end 0.14058 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 2 smd roundrect (at 0.775 0 180) (size 0.9 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 5 GND)) (pad 1 smd roundrect (at -0.775 0 180) (size 0.9 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 6 /KEY)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 62AB7255) (at 164.465 118.0465 90) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags capacitor) (path /62C48B76) (attr smd) (fp_text reference C4 (at 0 1.524 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 100nF (at 0 1.43 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.14058 0.51) (end 0.14058 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.14058 -0.51) (end 0.14058 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 1 smd roundrect (at -0.775 0 90) (size 0.9 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 33 "Net-(C4-Pad1)")) (pad 2 smd roundrect (at 0.775 0 90) (size 0.9 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 "Net-(BT1-Pad2)")) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 62AB7266) (at 105.9815 117.348 90) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags capacitor) (path /62A56CC8) (attr smd) (fp_text reference C3 (at 2.413 0 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 100nF (at 0 1.43 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.14058 0.51) (end 0.14058 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.14058 -0.51) (end 0.14058 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 1 smd roundrect (at -0.775 0 90) (size 0.9 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 5 GND)) (pad 2 smd roundrect (at 0.775 0 90) (size 0.9 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 32 "Net-(C3-Pad2)")) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 62AB7277) (at 160.528 114.6175 270) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags capacitor) (path /62B0F390) (attr smd) (fp_text reference C5 (at 0 1.397 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 4.7uF (at 0 1.43 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.14058 0.51) (end 0.14058 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.14058 -0.51) (end 0.14058 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 1 smd roundrect (at -0.775 0 270) (size 0.9 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 +BATT)) (pad 2 smd roundrect (at 0.775 0 270) (size 0.9 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 5 GND)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 62AB7288) (at 153.67 109.982) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags capacitor) (path /62B516E3) (attr smd) (fp_text reference C6 (at -2.54 0) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 10uF (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.14058 0.51) (end 0.14058 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.14058 -0.51) (end 0.14058 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 1 smd roundrect (at -0.775 0) (size 0.9 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 7 +3V3)) (pad 2 smd roundrect (at 0.775 0) (size 0.9 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 5 GND)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 62AB7299) (at 127.635 115.316 270) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags capacitor) (path /62A6B9CF) (attr smd) (fp_text reference C7 (at 2.54 -0.0127 270) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 100nF (at 0 1.43 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.14058 0.51) (end 0.14058 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.14058 -0.51) (end 0.14058 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 1 smd roundrect (at -0.775 0 270) (size 0.9 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 7 +3V3)) (pad 2 smd roundrect (at 0.775 0 270) (size 0.9 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 5 GND)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module LED_SMD:LED_0603_1608Metric (layer B.Cu) (tedit 5F68FEF1) (tstamp 62AB72AC) (at 168.6052 97.4725) (descr "LED SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags LED) (path /62A6BFAA) (attr smd) (fp_text reference D1 (at 0.0635 1.4605 180) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value LED (at 0.127 1.397 180) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05)) (fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05)) (fp_line (start -1.485 -0.735) (end 0.8 -0.735) (layer B.SilkS) (width 0.12)) (fp_line (start -1.485 0.735) (end -1.485 -0.735) (layer B.SilkS) (width 0.12)) (fp_line (start 0.8 0.735) (end -1.485 0.735) (layer B.SilkS) (width 0.12)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1)) (fp_line (start -0.8 0.1) (end -0.8 -0.4) (layer B.Fab) (width 0.1)) (fp_line (start -0.5 0.4) (end -0.8 0.1) (layer B.Fab) (width 0.1)) (fp_line (start 0.8 0.4) (end -0.5 0.4) (layer B.Fab) (width 0.1)) (fp_text user %R (at 0 0 180) (layer B.Fab) (effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror)) ) (pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25) (net 8 "Net-(D1-Pad1)")) (pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25) (net 9 "Net-(D1-Pad2)")) (model ${KISYS3DMOD}/LED_SMD.3dshapes/LED_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module TerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-3_1x03_P2.54mm_Horizontal (layer B.Cu) (tedit 5B1EC513) (tstamp 62AB7326) (at 114.3 96.774) (descr "Terminal Block TE 282834-3, 3 pins, pitch 2.54mm, size 8.08x6.5mm^2, drill diamater 1.1mm, pad diameter 2.1mm, see http://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F282834%7FC1%7Fpdf%7FEnglish%7FENG_CD_282834_C1.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_TE-Connectivity") (tags "THT Terminal Block TE 282834-3 pitch 2.54mm size 8.08x6.5mm^2 drill 1.1mm pad 2.1mm") (path /62A9FF51) (fp_text reference WM1 (at 2.54 -2.413) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value First (at 2.54 -4.37) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_line (start 7.08 3.75) (end -2 3.75) (layer B.CrtYd) (width 0.05)) (fp_line (start 7.08 -3.75) (end 7.08 3.75) (layer B.CrtYd) (width 0.05)) (fp_line (start -2 -3.75) (end 7.08 -3.75) (layer B.CrtYd) (width 0.05)) (fp_line (start -2 3.75) (end -2 -3.75) (layer B.CrtYd) (width 0.05)) (fp_line (start -1.86 -3.61) (end -1.46 -3.61) (layer B.SilkS) (width 0.12)) (fp_line (start -1.86 -2.97) (end -1.86 -3.61) (layer B.SilkS) (width 0.12)) (fp_line (start 5.781 0.835) (end 4.246 -0.7) (layer B.Fab) (width 0.1)) (fp_line (start 5.915 0.7) (end 4.38 -0.835) (layer B.Fab) (width 0.1)) (fp_line (start 3.241 0.835) (end 1.706 -0.7) (layer B.Fab) (width 0.1)) (fp_line (start 3.375 0.7) (end 1.84 -0.835) (layer B.Fab) (width 0.1)) (fp_line (start 0.701 0.835) (end -0.835 -0.7) (layer B.Fab) (width 0.1)) (fp_line (start 0.835 0.7) (end -0.701 -0.835) (layer B.Fab) (width 0.1)) (fp_line (start 6.7 3.37) (end 6.7 -3.37) (layer B.SilkS) (width 0.12)) (fp_line (start -1.62 3.37) (end -1.62 -3.37) (layer B.SilkS) (width 0.12)) (fp_line (start -1.62 -3.37) (end 6.7 -3.37) (layer B.SilkS) (width 0.12)) (fp_line (start -1.62 3.37) (end 6.7 3.37) (layer B.SilkS) (width 0.12)) (fp_line (start -1.62 2.25) (end 6.7 2.25) (layer B.SilkS) (width 0.12)) (fp_line (start -1.5 2.25) (end 6.58 2.25) (layer B.Fab) (width 0.1)) (fp_line (start -1.62 -2.85) (end 6.7 -2.85) (layer B.SilkS) (width 0.12)) (fp_line (start -1.5 -2.85) (end 6.58 -2.85) (layer B.Fab) (width 0.1)) (fp_line (start -1.5 -2.85) (end -1.5 3.25) (layer B.Fab) (width 0.1)) (fp_line (start -1.1 -3.25) (end -1.5 -2.85) (layer B.Fab) (width 0.1)) (fp_line (start 6.58 -3.25) (end -1.1 -3.25) (layer B.Fab) (width 0.1)) (fp_line (start 6.58 3.25) (end 6.58 -3.25) (layer B.Fab) (width 0.1)) (fp_line (start -1.5 3.25) (end 6.58 3.25) (layer B.Fab) (width 0.1)) (fp_circle (center 5.08 0) (end 6.18 0) (layer B.Fab) (width 0.1)) (fp_circle (center 2.54 0) (end 3.64 0) (layer B.Fab) (width 0.1)) (fp_circle (center 0 0) (end 1.1 0) (layer B.Fab) (width 0.1)) (fp_text user %R (at 2.54 -2) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (pad 1 thru_hole rect (at 0 0) (size 2.1 2.1) (drill 1.1) (layers *.Cu *.Mask) (net 7 +3V3)) (pad 2 thru_hole circle (at 2.54 0) (size 2.1 2.1) (drill 1.1) (layers *.Cu *.Mask) (net 18 /CAPTURE0)) (pad 3 thru_hole circle (at 5.08 0) (size 2.1 2.1) (drill 1.1) (layers *.Cu *.Mask) (net 5 GND)) (model ${KISYS3DMOD}/TerminalBlock_TE-Connectivity.3dshapes/TerminalBlock_TE_282834-3_1x03_P2.54mm_Horizontal.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module TerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-3_1x03_P2.54mm_Horizontal (layer B.Cu) (tedit 5B1EC513) (tstamp 62AB734A) (at 123.952 96.774) (descr "Terminal Block TE 282834-3, 3 pins, pitch 2.54mm, size 8.08x6.5mm^2, drill diamater 1.1mm, pad diameter 2.1mm, see http://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F282834%7FC1%7Fpdf%7FEnglish%7FENG_CD_282834_C1.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_TE-Connectivity") (tags "THT Terminal Block TE 282834-3 pitch 2.54mm size 8.08x6.5mm^2 drill 1.1mm pad 2.1mm") (path /62AA0C42) (fp_text reference WM2 (at 2.54 -2.286) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value Second (at 2.54 -4.37) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_circle (center 0 0) (end 1.1 0) (layer B.Fab) (width 0.1)) (fp_circle (center 2.54 0) (end 3.64 0) (layer B.Fab) (width 0.1)) (fp_circle (center 5.08 0) (end 6.18 0) (layer B.Fab) (width 0.1)) (fp_line (start -1.5 3.25) (end 6.58 3.25) (layer B.Fab) (width 0.1)) (fp_line (start 6.58 3.25) (end 6.58 -3.25) (layer B.Fab) (width 0.1)) (fp_line (start 6.58 -3.25) (end -1.1 -3.25) (layer B.Fab) (width 0.1)) (fp_line (start -1.1 -3.25) (end -1.5 -2.85) (layer B.Fab) (width 0.1)) (fp_line (start -1.5 -2.85) (end -1.5 3.25) (layer B.Fab) (width 0.1)) (fp_line (start -1.5 -2.85) (end 6.58 -2.85) (layer B.Fab) (width 0.1)) (fp_line (start -1.62 -2.85) (end 6.7 -2.85) (layer B.SilkS) (width 0.12)) (fp_line (start -1.5 2.25) (end 6.58 2.25) (layer B.Fab) (width 0.1)) (fp_line (start -1.62 2.25) (end 6.7 2.25) (layer B.SilkS) (width 0.12)) (fp_line (start -1.62 3.37) (end 6.7 3.37) (layer B.SilkS) (width 0.12)) (fp_line (start -1.62 -3.37) (end 6.7 -3.37) (layer B.SilkS) (width 0.12)) (fp_line (start -1.62 3.37) (end -1.62 -3.37) (layer B.SilkS) (width 0.12)) (fp_line (start 6.7 3.37) (end 6.7 -3.37) (layer B.SilkS) (width 0.12)) (fp_line (start 0.835 0.7) (end -0.701 -0.835) (layer B.Fab) (width 0.1)) (fp_line (start 0.701 0.835) (end -0.835 -0.7) (layer B.Fab) (width 0.1)) (fp_line (start 3.375 0.7) (end 1.84 -0.835) (layer B.Fab) (width 0.1)) (fp_line (start 3.241 0.835) (end 1.706 -0.7) (layer B.Fab) (width 0.1)) (fp_line (start 5.915 0.7) (end 4.38 -0.835) (layer B.Fab) (width 0.1)) (fp_line (start 5.781 0.835) (end 4.246 -0.7) (layer B.Fab) (width 0.1)) (fp_line (start -1.86 -2.97) (end -1.86 -3.61) (layer B.SilkS) (width 0.12)) (fp_line (start -1.86 -3.61) (end -1.46 -3.61) (layer B.SilkS) (width 0.12)) (fp_line (start -2 3.75) (end -2 -3.75) (layer B.CrtYd) (width 0.05)) (fp_line (start -2 -3.75) (end 7.08 -3.75) (layer B.CrtYd) (width 0.05)) (fp_line (start 7.08 -3.75) (end 7.08 3.75) (layer B.CrtYd) (width 0.05)) (fp_line (start 7.08 3.75) (end -2 3.75) (layer B.CrtYd) (width 0.05)) (fp_text user %R (at 2.54 -2) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (pad 3 thru_hole circle (at 5.08 0) (size 2.1 2.1) (drill 1.1) (layers *.Cu *.Mask) (net 5 GND)) (pad 2 thru_hole circle (at 2.54 0) (size 2.1 2.1) (drill 1.1) (layers *.Cu *.Mask) (net 19 /CAPTURE1)) (pad 1 thru_hole rect (at 0 0) (size 2.1 2.1) (drill 1.1) (layers *.Cu *.Mask) (net 7 +3V3)) (model ${KISYS3DMOD}/TerminalBlock_TE-Connectivity.3dshapes/TerminalBlock_TE_282834-3_1x03_P2.54mm_Horizontal.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module TerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-3_1x03_P2.54mm_Horizontal (layer B.Cu) (tedit 5B1EC513) (tstamp 62AB736E) (at 133.604 96.774) (descr "Terminal Block TE 282834-3, 3 pins, pitch 2.54mm, size 8.08x6.5mm^2, drill diamater 1.1mm, pad diameter 2.1mm, see http://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F282834%7FC1%7Fpdf%7FEnglish%7FENG_CD_282834_C1.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_TE-Connectivity") (tags "THT Terminal Block TE 282834-3 pitch 2.54mm size 8.08x6.5mm^2 drill 1.1mm pad 2.1mm") (path /62AA134A) (fp_text reference WM3 (at 2.54 -2.032) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value Third (at 2.54 -4.37) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_line (start 7.08 3.75) (end -2 3.75) (layer B.CrtYd) (width 0.05)) (fp_line (start 7.08 -3.75) (end 7.08 3.75) (layer B.CrtYd) (width 0.05)) (fp_line (start -2 -3.75) (end 7.08 -3.75) (layer B.CrtYd) (width 0.05)) (fp_line (start -2 3.75) (end -2 -3.75) (layer B.CrtYd) (width 0.05)) (fp_line (start -1.86 -3.61) (end -1.46 -3.61) (layer B.SilkS) (width 0.12)) (fp_line (start -1.86 -2.97) (end -1.86 -3.61) (layer B.SilkS) (width 0.12)) (fp_line (start 5.781 0.835) (end 4.246 -0.7) (layer B.Fab) (width 0.1)) (fp_line (start 5.915 0.7) (end 4.38 -0.835) (layer B.Fab) (width 0.1)) (fp_line (start 3.241 0.835) (end 1.706 -0.7) (layer B.Fab) (width 0.1)) (fp_line (start 3.375 0.7) (end 1.84 -0.835) (layer B.Fab) (width 0.1)) (fp_line (start 0.701 0.835) (end -0.835 -0.7) (layer B.Fab) (width 0.1)) (fp_line (start 0.835 0.7) (end -0.701 -0.835) (layer B.Fab) (width 0.1)) (fp_line (start 6.7 3.37) (end 6.7 -3.37) (layer B.SilkS) (width 0.12)) (fp_line (start -1.62 3.37) (end -1.62 -3.37) (layer B.SilkS) (width 0.12)) (fp_line (start -1.62 -3.37) (end 6.7 -3.37) (layer B.SilkS) (width 0.12)) (fp_line (start -1.62 3.37) (end 6.7 3.37) (layer B.SilkS) (width 0.12)) (fp_line (start -1.62 2.25) (end 6.7 2.25) (layer B.SilkS) (width 0.12)) (fp_line (start -1.5 2.25) (end 6.58 2.25) (layer B.Fab) (width 0.1)) (fp_line (start -1.62 -2.85) (end 6.7 -2.85) (layer B.SilkS) (width 0.12)) (fp_line (start -1.5 -2.85) (end 6.58 -2.85) (layer B.Fab) (width 0.1)) (fp_line (start -1.5 -2.85) (end -1.5 3.25) (layer B.Fab) (width 0.1)) (fp_line (start -1.1 -3.25) (end -1.5 -2.85) (layer B.Fab) (width 0.1)) (fp_line (start 6.58 -3.25) (end -1.1 -3.25) (layer B.Fab) (width 0.1)) (fp_line (start 6.58 3.25) (end 6.58 -3.25) (layer B.Fab) (width 0.1)) (fp_line (start -1.5 3.25) (end 6.58 3.25) (layer B.Fab) (width 0.1)) (fp_circle (center 5.08 0) (end 6.18 0) (layer B.Fab) (width 0.1)) (fp_circle (center 2.54 0) (end 3.64 0) (layer B.Fab) (width 0.1)) (fp_circle (center 0 0) (end 1.1 0) (layer B.Fab) (width 0.1)) (fp_text user %R (at 2.54 -2) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (pad 1 thru_hole rect (at 0 0) (size 2.1 2.1) (drill 1.1) (layers *.Cu *.Mask) (net 7 +3V3)) (pad 2 thru_hole circle (at 2.54 0) (size 2.1 2.1) (drill 1.1) (layers *.Cu *.Mask) (net 20 /CAPTURE2)) (pad 3 thru_hole circle (at 5.08 0) (size 2.1 2.1) (drill 1.1) (layers *.Cu *.Mask) (net 5 GND)) (model ${KISYS3DMOD}/TerminalBlock_TE-Connectivity.3dshapes/TerminalBlock_TE_282834-3_1x03_P2.54mm_Horizontal.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Package_TO_SOT_SMD:SOT-23 (layer F.Cu) (tedit 5A02FF57) (tstamp 62AB740B) (at 139.192 115.824) (descr "SOT-23, Standard") (tags SOT-23) (path /62B0380D) (attr smd) (fp_text reference Q2 (at -2.54 -0.0635 270) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value Q_NPN_BCE (at 0 2.5) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 0.76 1.58) (end -0.7 1.58) (layer F.SilkS) (width 0.12)) (fp_line (start 0.76 -1.58) (end -1.4 -1.58) (layer F.SilkS) (width 0.12)) (fp_line (start -1.7 1.75) (end -1.7 -1.75) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.7 1.75) (end -1.7 1.75) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.7 -1.75) (end 1.7 1.75) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.7 -1.75) (end 1.7 -1.75) (layer F.CrtYd) (width 0.05)) (fp_line (start 0.76 -1.58) (end 0.76 -0.65) (layer F.SilkS) (width 0.12)) (fp_line (start 0.76 1.58) (end 0.76 0.65) (layer F.SilkS) (width 0.12)) (fp_line (start -0.7 1.52) (end 0.7 1.52) (layer F.Fab) (width 0.1)) (fp_line (start 0.7 -1.52) (end 0.7 1.52) (layer F.Fab) (width 0.1)) (fp_line (start -0.7 -0.95) (end -0.15 -1.52) (layer F.Fab) (width 0.1)) (fp_line (start -0.15 -1.52) (end 0.7 -1.52) (layer F.Fab) (width 0.1)) (fp_line (start -0.7 -0.95) (end -0.7 1.5) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.075))) ) (pad 1 smd rect (at -1 -0.95) (size 0.9 0.8) (layers F.Cu F.Paste F.Mask) (net 25 "Net-(Q2-Pad1)")) (pad 2 smd rect (at -1 0.95) (size 0.9 0.8) (layers F.Cu F.Paste F.Mask) (net 4 "Net-(BZ1-Pad2)")) (pad 3 smd rect (at 1 0) (size 0.9 0.8) (layers F.Cu F.Paste F.Mask) (net 5 GND)) (model ${KISYS3DMOD}/Package_TO_SOT_SMD.3dshapes/SOT-23.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 62AB741C) (at 106.299 106.553 180) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags resistor) (path /62A4318B) (attr smd) (fp_text reference R1 (at -2.4135 0) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 10k (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.237258 -0.5225) (end 0.237258 -0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start -0.237258 0.5225) (end 0.237258 0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 2 smd roundrect (at 0.825 0 180) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 26 "Net-(R1-Pad2)")) (pad 1 smd roundrect (at -0.825 0 180) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 7 +3V3)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 62AB742D) (at 167.259 109.982 180) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags resistor) (path /62A7DD74) (attr smd) (fp_text reference R2 (at -2.54 0 180) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 1.65k (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.237258 -0.5225) (end 0.237258 -0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start -0.237258 0.5225) (end 0.237258 0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 2 smd roundrect (at 0.825 0 180) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 27 "Net-(R2-Pad2)")) (pad 1 smd roundrect (at -0.825 0 180) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 5 GND)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer B.Cu) (tedit 5F68FEEE) (tstamp 62AB743E) (at 168.6052 95.885) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags resistor) (path /62A76634) (attr smd) (fp_text reference R3 (at 0.0635 -1.27 180) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value 500 (at 0 -1.43 180) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05)) (fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05)) (fp_line (start -0.237258 -0.5225) (end 0.237258 -0.5225) (layer B.SilkS) (width 0.12)) (fp_line (start -0.237258 0.5225) (end 0.237258 0.5225) (layer B.SilkS) (width 0.12)) (fp_line (start 0.8 -0.4125) (end -0.8 -0.4125) (layer B.Fab) (width 0.1)) (fp_line (start 0.8 0.4125) (end 0.8 -0.4125) (layer B.Fab) (width 0.1)) (fp_line (start -0.8 0.4125) (end 0.8 0.4125) (layer B.Fab) (width 0.1)) (fp_line (start -0.8 -0.4125) (end -0.8 0.4125) (layer B.Fab) (width 0.1)) (fp_text user %R (at 0 0 180) (layer B.Fab) (effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror)) ) (pad 1 smd roundrect (at -0.825 0) (size 0.8 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25) (net 3 +5V)) (pad 2 smd roundrect (at 0.825 0) (size 0.8 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25) (net 9 "Net-(D1-Pad2)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 62AB744F) (at 158.369 118.0465 270) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags resistor) (path /62B788D5) (attr smd) (fp_text reference R5 (at 0 1.397 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 1k (at 0 1.43 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.237258 0.5225) (end 0.237258 0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start -0.237258 -0.5225) (end 0.237258 -0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 1 smd roundrect (at -0.825 0 270) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 "Net-(BT1-Pad2)")) (pad 2 smd roundrect (at 0.825 0 270) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 36 "Net-(R5-Pad2)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 62AB7460) (at 162.052 114.6175 90) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags resistor) (path /62C1475D) (attr smd) (fp_text reference R7 (at 0 1.524 270) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 100 (at 0 1.43 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.237258 0.5225) (end 0.237258 0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start -0.237258 -0.5225) (end 0.237258 -0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 1 smd roundrect (at -0.825 0 90) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 33 "Net-(C4-Pad1)")) (pad 2 smd roundrect (at 0.825 0 90) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 +BATT)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 62AB7471) (at 107.823 117.348 270) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags resistor) (path /62A5AB03) (attr smd) (fp_text reference R6 (at -2.413 0.0635 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 1k (at 0 1.43 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.237258 0.5225) (end 0.237258 0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start -0.237258 -0.5225) (end 0.237258 -0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 1 smd roundrect (at -0.825 0 270) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 32 "Net-(C3-Pad2)")) (pad 2 smd roundrect (at 0.825 0 270) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 21 /RESET)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 62AB7482) (at 106.299 113.2205 90) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags resistor) (path /62C2FEBA) (attr smd) (fp_text reference R8 (at 2.159 -0.127 180) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value ??? (at 0 1.43 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.237258 0.5225) (end 0.237258 0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start -0.237258 -0.5225) (end 0.237258 -0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 1 smd roundrect (at -0.825 0 90) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 28 /BAT_ADC)) (pad 2 smd roundrect (at 0.825 0 90) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 +BATT)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 62AB7493) (at 107.8865 113.2205 270) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags resistor) (path /62C30B2A) (attr smd) (fp_text reference R9 (at -2.159 -0.127 180) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value ??? (at 0 1.43 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.237258 0.5225) (end 0.237258 0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start -0.237258 -0.5225) (end 0.237258 -0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 1 smd roundrect (at -0.825 0 270) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 5 GND)) (pad 2 smd roundrect (at 0.825 0 270) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 28 /BAT_ADC)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 62AB74A4) (at 127.635 112.2045 270) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags resistor) (path /62A704CA) (attr smd) (fp_text reference R10 (at -2.921 0 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 1k (at 0 1.43 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.237258 0.5225) (end 0.237258 0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start -0.237258 -0.5225) (end 0.237258 -0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 1 smd roundrect (at -0.825 0 270) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 22 /DC)) (pad 2 smd roundrect (at 0.825 0 270) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 7 +3V3)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 62AB74B5) (at 156.083 110.8075 270) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags resistor) (path /62B39345) (attr smd) (fp_text reference R11 (at 2.921 0 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 10k (at 0 1.43 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.237258 0.5225) (end 0.237258 0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start -0.237258 -0.5225) (end 0.237258 -0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 1 smd roundrect (at -0.825 0 270) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 5 GND)) (pad 2 smd roundrect (at 0.825 0 270) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 37 "Net-(R11-Pad2)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 62AB74C6) (at 153.67 111.633 180) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags resistor) (path /62B3A188) (attr smd) (fp_text reference R12 (at 3.048 0.0254) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 45.3k (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.237258 -0.5225) (end 0.237258 -0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start -0.237258 0.5225) (end 0.237258 0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 2 smd roundrect (at 0.825 0 180) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 7 +3V3)) (pad 1 smd roundrect (at -0.825 0 180) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 37 "Net-(R11-Pad2)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 62AB74D7) (at 139.065 113.157 180) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags resistor) (path /62B15366) (attr smd) (fp_text reference R13 (at 0 1.524) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 470 (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.237258 0.5225) (end 0.237258 0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start -0.237258 -0.5225) (end 0.237258 -0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 1 smd roundrect (at -0.825 0 180) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 25 "Net-(Q2-Pad1)")) (pad 2 smd roundrect (at 0.825 0 180) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 29 /BUZZER)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Package_TO_SOT_SMD:TSOT-23-5 (layer F.Cu) (tedit 5A02FF57) (tstamp 62AB7533) (at 163.449 110.744) (descr "5-pin TSOT23 package, http://cds.linear.com/docs/en/packaging/SOT_5_05-08-1635.pdf") (tags TSOT-23-5) (path /62AE1DE9) (attr smd) (fp_text reference U1 (at -0.127 -2.286) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value LTC4054ES5-4.2 (at 0 2.5) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -0.88 1.56) (end 0.88 1.56) (layer F.SilkS) (width 0.12)) (fp_line (start 0.88 -1.51) (end -1.55 -1.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.88 -1) (end -0.43 -1.45) (layer F.Fab) (width 0.1)) (fp_line (start 0.88 -1.45) (end -0.43 -1.45) (layer F.Fab) (width 0.1)) (fp_line (start -0.88 -1) (end -0.88 1.45) (layer F.Fab) (width 0.1)) (fp_line (start 0.88 1.45) (end -0.88 1.45) (layer F.Fab) (width 0.1)) (fp_line (start 0.88 -1.45) (end 0.88 1.45) (layer F.Fab) (width 0.1)) (fp_line (start -2.17 -1.7) (end 2.17 -1.7) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.17 -1.7) (end -2.17 1.7) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.17 1.7) (end 2.17 -1.7) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.17 1.7) (end -2.17 1.7) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.075))) ) (pad 5 smd rect (at 1.31 -0.95) (size 1.22 0.65) (layers F.Cu F.Paste F.Mask) (net 27 "Net-(R2-Pad2)")) (pad 4 smd rect (at 1.31 0.95) (size 1.22 0.65) (layers F.Cu F.Paste F.Mask) (net 3 +5V)) (pad 3 smd rect (at -1.31 0.95) (size 1.22 0.65) (layers F.Cu F.Paste F.Mask) (net 1 +BATT)) (pad 2 smd rect (at -1.31 0) (size 1.22 0.65) (layers F.Cu F.Paste F.Mask) (net 5 GND)) (pad 1 smd rect (at -1.31 -0.95) (size 1.22 0.65) (layers F.Cu F.Paste F.Mask) (net 8 "Net-(D1-Pad1)")) (model ${KISYS3DMOD}/Package_TO_SOT_SMD.3dshapes/TSOT-23-5.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module RF_Module:E18-MS1-PCB (layer F.Cu) (tedit 5ACF9A19) (tstamp 62AB7593) (at 117.602 115.697 180) (descr http://www.cdebyte.com/en/downpdf.aspx?id=122) (tags Zigbee) (path /629F7D04) (attr smd) (fp_text reference U4 (at 0 13.5 180) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value E18-MS1-PCB (at 0 -12.5 180) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 7.05 11.5) (end -7.05 11.5) (layer F.Fab) (width 0.1)) (fp_line (start -7.05 -11.5) (end 7.05 -11.5) (layer F.Fab) (width 0.1)) (fp_line (start 7.05 -11.5) (end 7.05 11.5) (layer F.Fab) (width 0.1)) (fp_line (start 7.05 -6) (end -7.05 -6) (layer F.Fab) (width 0.1)) (fp_line (start -8.3 12.75) (end -8.3 -11.75) (layer F.CrtYd) (width 0.05)) (fp_line (start -8.3 -11.75) (end 8.3 -11.75) (layer F.CrtYd) (width 0.05)) (fp_line (start 8.3 -11.75) (end 8.3 12.75) (layer F.CrtYd) (width 0.05)) (fp_line (start 8.3 12.75) (end -8.3 12.75) (layer F.CrtYd) (width 0.05)) (fp_line (start -7.17 11.62) (end -7.17 10.05) (layer F.SilkS) (width 0.12)) (fp_line (start -7.17 11.62) (end -5.28 11.62) (layer F.SilkS) (width 0.12)) (fp_line (start 5.28 11.62) (end 7.17 11.62) (layer F.SilkS) (width 0.12)) (fp_line (start 7.17 11.62) (end 7.17 10.05) (layer F.SilkS) (width 0.12)) (fp_line (start 7.17 -0.46) (end 7.17 -11.62) (layer F.SilkS) (width 0.12)) (fp_line (start 7.17 -11.62) (end -7.17 -11.62) (layer F.SilkS) (width 0.12)) (fp_line (start -7.17 -11.62) (end -7.17 -0.46) (layer F.SilkS) (width 0.12)) (fp_line (start -7.05 -6) (end -7.05 -11.5) (layer Dwgs.User) (width 0.1)) (fp_line (start -7.05 -11.5) (end 7.05 -11.5) (layer Dwgs.User) (width 0.1)) (fp_line (start 7.05 -11.5) (end 7.05 -6) (layer Dwgs.User) (width 0.1)) (fp_line (start 7.05 -6) (end -7.05 -6) (layer Dwgs.User) (width 0.1)) (fp_line (start -6 -6) (end -7.05 -7.05) (layer Dwgs.User) (width 0.1)) (fp_line (start -5 -6) (end -7.05 -8.05) (layer Dwgs.User) (width 0.1)) (fp_line (start -4 -6) (end -7.05 -9.05) (layer Dwgs.User) (width 0.1)) (fp_line (start -3 -6) (end -7.05 -10.05) (layer Dwgs.User) (width 0.1)) (fp_line (start -2 -6) (end -7.05 -11.05) (layer Dwgs.User) (width 0.1)) (fp_line (start -1 -6) (end -6.5 -11.5) (layer Dwgs.User) (width 0.1)) (fp_line (start 0 -6) (end -5.5 -11.5) (layer Dwgs.User) (width 0.1)) (fp_line (start 1 -6) (end -4.5 -11.5) (layer Dwgs.User) (width 0.1)) (fp_line (start 2 -6) (end -3.5 -11.5) (layer Dwgs.User) (width 0.1)) (fp_line (start 3 -6) (end -2.5 -11.5) (layer Dwgs.User) (width 0.1)) (fp_line (start 4 -6) (end -1.5 -11.5) (layer Dwgs.User) (width 0.1)) (fp_line (start 5 -6) (end -0.5 -11.5) (layer Dwgs.User) (width 0.1)) (fp_line (start 6 -6) (end 0.5 -11.5) (layer Dwgs.User) (width 0.1)) (fp_line (start 7 -6) (end 1.5 -11.5) (layer Dwgs.User) (width 0.1)) (fp_line (start 2.5 -11.5) (end 7.05 -6.95) (layer Dwgs.User) (width 0.1)) (fp_line (start 7.05 -7.95) (end 3.5 -11.5) (layer Dwgs.User) (width 0.1)) (fp_line (start 4.5 -11.5) (end 7.05 -8.95) (layer Dwgs.User) (width 0.1)) (fp_line (start 7.05 -9.95) (end 5.5 -11.5) (layer Dwgs.User) (width 0.1)) (fp_line (start 6.5 -11.5) (end 7.05 -10.95) (layer Dwgs.User) (width 0.1)) (fp_line (start -7.17 -0.46) (end -7.77 -0.46) (layer F.SilkS) (width 0.12)) (fp_line (start -7.05 0) (end -6.7 0.35) (layer F.Fab) (width 0.1)) (fp_line (start -6.7 0.35) (end -7.05 0.7) (layer F.Fab) (width 0.1)) (fp_line (start -7.05 -11.5) (end -7.05 0) (layer F.Fab) (width 0.1)) (fp_line (start -7.05 0.7) (end -7.05 11.5) (layer F.Fab) (width 0.1)) (fp_text user "on any PCB layer." (at 0 -7 180) (layer Cmts.User) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (fp_text user "No metal, traces, or components" (at 0 -8 180) (layer Cmts.User) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (fp_text user "KEEP-OUT ZONE" (at 0 -10 180) (layer Cmts.User) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0 180) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 8 smd rect (at -7.05 9.24 90) (size 0.7 2) (layers F.Cu F.Paste F.Mask) (net 43 "Net-(U4-Pad8)")) (pad 7 smd rect (at -7.05 7.97 90) (size 0.7 2) (layers F.Cu F.Paste F.Mask) (net 44 /P1.6)) (pad 6 smd rect (at -7.05 6.7 90) (size 0.7 2) (layers F.Cu F.Paste F.Mask) (net 29 /BUZZER)) (pad 5 smd rect (at -7.05 5.43 90) (size 0.7 2) (layers F.Cu F.Paste F.Mask) (net 10 /P2.0)) (pad 4 smd rect (at -7.05 4.16 90) (size 0.7 2) (layers F.Cu F.Paste F.Mask) (net 23 /DD)) (pad 3 smd rect (at -7.05 2.89 90) (size 0.7 2) (layers F.Cu F.Paste F.Mask) (net 22 /DC)) (pad 2 smd rect (at -7.05 1.62 90) (size 0.7 2) (layers F.Cu F.Paste F.Mask) (net 7 +3V3)) (pad 1 smd rect (at -7.05 0.35 90) (size 0.7 2) (layers F.Cu F.Paste F.Mask) (net 5 GND)) (pad 16 smd rect (at 4.43 11.5) (size 0.7 2) (layers F.Cu F.Paste F.Mask) (net 17 /P0.7)) (pad 15 smd rect (at 3.16 11.5) (size 0.7 2) (layers F.Cu F.Paste F.Mask) (net 16 /P1.0)) (pad 14 smd rect (at 1.89 11.5) (size 0.7 2) (layers F.Cu F.Paste F.Mask) (net 15 /P1.1)) (pad 13 smd rect (at 0.62 11.5) (size 0.7 2) (layers F.Cu F.Paste F.Mask) (net 14 /P1.2)) (pad 12 smd rect (at -0.65 11.5) (size 0.7 2) (layers F.Cu F.Paste F.Mask) (net 13 /P1.3)) (pad 11 smd rect (at -1.92 11.5) (size 0.7 2) (layers F.Cu F.Paste F.Mask) (net 12 /P1.4)) (pad 10 smd rect (at -3.19 11.5) (size 0.7 2) (layers F.Cu F.Paste F.Mask) (net 11 /P1.5)) (pad 9 smd rect (at -4.46 11.5) (size 0.7 2) (layers F.Cu F.Paste F.Mask) (net 42 "Net-(U4-Pad9)")) (pad 24 smd rect (at 7.05 0.35 270) (size 0.7 2) (layers F.Cu F.Paste F.Mask) (net 32 "Net-(C3-Pad2)")) (pad 23 smd rect (at 7.05 1.62 270) (size 0.7 2) (layers F.Cu F.Paste F.Mask) (net 28 /BAT_ADC)) (pad 22 smd rect (at 7.05 2.89 270) (size 0.7 2) (layers F.Cu F.Paste F.Mask) (net 30 /EXT_LOAD)) (pad 21 smd rect (at 7.05 4.16 270) (size 0.7 2) (layers F.Cu F.Paste F.Mask) (net 18 /CAPTURE0)) (pad 20 smd rect (at 7.05 5.43 270) (size 0.7 2) (layers F.Cu F.Paste F.Mask) (net 19 /CAPTURE1)) (pad 19 smd rect (at 7.05 6.7 270) (size 0.7 2) (layers F.Cu F.Paste F.Mask) (net 20 /CAPTURE2)) (pad 18 smd rect (at 7.05 7.97 270) (size 0.7 2) (layers F.Cu F.Paste F.Mask) (net 6 /KEY)) (pad 17 smd rect (at 7.05 9.24 270) (size 0.7 2) (layers F.Cu F.Paste F.Mask) (net 35 /LED)) (model ${KISYS3DMOD}/RF_Module.3dshapes/e18-ms1-pcb.STEP (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Package_TO_SOT_SMD:SOT-23-5 (layer F.Cu) (tedit 5A02FF57) (tstamp 62AB75A8) (at 158.877 110.744 180) (descr "5-pin SOT23 package") (tags SOT-23-5) (path /62AFAD2E) (attr smd) (fp_text reference U5 (at 0.0635 -2.4765) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value STI3408B (at 0 2.9) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 0.9 -1.55) (end 0.9 1.55) (layer F.Fab) (width 0.1)) (fp_line (start 0.9 1.55) (end -0.9 1.55) (layer F.Fab) (width 0.1)) (fp_line (start -0.9 -0.9) (end -0.9 1.55) (layer F.Fab) (width 0.1)) (fp_line (start 0.9 -1.55) (end -0.25 -1.55) (layer F.Fab) (width 0.1)) (fp_line (start -0.9 -0.9) (end -0.25 -1.55) (layer F.Fab) (width 0.1)) (fp_line (start -1.9 1.8) (end -1.9 -1.8) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.9 1.8) (end -1.9 1.8) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.9 -1.8) (end 1.9 1.8) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.9 -1.8) (end 1.9 -1.8) (layer F.CrtYd) (width 0.05)) (fp_line (start 0.9 -1.61) (end -1.55 -1.61) (layer F.SilkS) (width 0.12)) (fp_line (start -0.9 1.61) (end 0.9 1.61) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.075))) ) (pad 1 smd rect (at -1.1 -0.95 180) (size 1.06 0.65) (layers F.Cu F.Paste F.Mask) (net 1 +BATT)) (pad 2 smd rect (at -1.1 0 180) (size 1.06 0.65) (layers F.Cu F.Paste F.Mask) (net 5 GND)) (pad 3 smd rect (at -1.1 0.95 180) (size 1.06 0.65) (layers F.Cu F.Paste F.Mask) (net 24 "Net-(L1-Pad1)")) (pad 4 smd rect (at 1.1 0.95 180) (size 1.06 0.65) (layers F.Cu F.Paste F.Mask) (net 1 +BATT)) (pad 5 smd rect (at 1.1 -0.95 180) (size 1.06 0.65) (layers F.Cu F.Paste F.Mask) (net 37 "Net-(R11-Pad2)")) (model ${KISYS3DMOD}/Package_TO_SOT_SMD.3dshapes/SOT-23-5.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module LED_SMD:LED_0603_1608Metric (layer B.Cu) (tedit 5F68FEF1) (tstamp 62ACA768) (at 108.331 96.774 180) (descr "LED SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags LED) (path /62D7F658) (attr smd) (fp_text reference D2 (at -2.4765 -0.0635 180) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value LED (at -0.127 2.667 180) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_line (start 0.8 0.4) (end -0.5 0.4) (layer B.Fab) (width 0.1)) (fp_line (start -0.5 0.4) (end -0.8 0.1) (layer B.Fab) (width 0.1)) (fp_line (start -0.8 0.1) (end -0.8 -0.4) (layer B.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1)) (fp_line (start 0.8 0.735) (end -1.485 0.735) (layer B.SilkS) (width 0.12)) (fp_line (start -1.485 0.735) (end -1.485 -0.735) (layer B.SilkS) (width 0.12)) (fp_line (start -1.485 -0.735) (end 0.8 -0.735) (layer B.SilkS) (width 0.12)) (fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05)) (fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05)) (fp_text user %R (at 0 0 180) (layer B.Fab) (effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror)) ) (pad 1 smd roundrect (at -0.7875 0 180) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25) (net 5 GND)) (pad 2 smd roundrect (at 0.7875 0 180) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25) (net 34 "Net-(D2-Pad2)")) (model ${KISYS3DMOD}/LED_SMD.3dshapes/LED_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 62ACA796) (at 106.299 104.902) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags resistor) (path /62D81460) (attr smd) (fp_text reference R4 (at 2.54 0) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 500 (at -3.302 -0.127 -270) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.237258 -0.5225) (end 0.237258 -0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start -0.237258 0.5225) (end 0.237258 0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0 -180) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 1 smd roundrect (at -0.825 0) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 34 "Net-(D2-Pad2)")) (pad 2 smd roundrect (at 0.825 0) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 35 /LED)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Package_SO:TSSOP-8_4.4x3mm_P0.65mm (layer F.Cu) (tedit 5E476F32) (tstamp 62AEEAE4) (at 161.417 122.8725 180) (descr "TSSOP, 8 Pin (JEDEC MO-153 Var AA https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py") (tags "TSSOP SO") (path /62D41CED) (attr smd) (fp_text reference U2 (at 0 -2.54) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value FS8205A (at 0 2.45) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 3.85 -1.75) (end -3.85 -1.75) (layer F.CrtYd) (width 0.05)) (fp_line (start 3.85 1.75) (end 3.85 -1.75) (layer F.CrtYd) (width 0.05)) (fp_line (start -3.85 1.75) (end 3.85 1.75) (layer F.CrtYd) (width 0.05)) (fp_line (start -3.85 -1.75) (end -3.85 1.75) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.2 -0.75) (end -1.45 -1.5) (layer F.Fab) (width 0.1)) (fp_line (start -2.2 1.5) (end -2.2 -0.75) (layer F.Fab) (width 0.1)) (fp_line (start 2.2 1.5) (end -2.2 1.5) (layer F.Fab) (width 0.1)) (fp_line (start 2.2 -1.5) (end 2.2 1.5) (layer F.Fab) (width 0.1)) (fp_line (start -1.45 -1.5) (end 2.2 -1.5) (layer F.Fab) (width 0.1)) (fp_line (start 0 -1.61) (end -3.6 -1.61) (layer F.SilkS) (width 0.12)) (fp_line (start 0 -1.61) (end 2.2 -1.61) (layer F.SilkS) (width 0.12)) (fp_line (start 0 1.61) (end -2.2 1.61) (layer F.SilkS) (width 0.12)) (fp_line (start 0 1.61) (end 2.2 1.61) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 1 smd roundrect (at -2.8625 -0.975 180) (size 1.475 0.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 39 "Net-(U2-Pad1)")) (pad 2 smd roundrect (at -2.8625 -0.325 180) (size 1.475 0.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 "Net-(BT1-Pad2)")) (pad 3 smd roundrect (at -2.8625 0.325 180) (size 1.475 0.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 "Net-(BT1-Pad2)")) (pad 4 smd roundrect (at -2.8625 0.975 180) (size 1.475 0.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 31 "Net-(U2-Pad4)")) (pad 5 smd roundrect (at 2.8625 0.975 180) (size 1.475 0.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 40 "Net-(U2-Pad5)")) (pad 6 smd roundrect (at 2.8625 0.325 180) (size 1.475 0.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 5 GND)) (pad 7 smd roundrect (at 2.8625 -0.325 180) (size 1.475 0.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 5 GND)) (pad 8 smd roundrect (at 2.8625 -0.975 180) (size 1.475 0.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 39 "Net-(U2-Pad1)")) (model ${KISYS3DMOD}/Package_SO.3dshapes/TSSOP-8_4.4x3mm_P0.65mm.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Package_TO_SOT_SMD:TSOT-23-6 (layer F.Cu) (tedit 5A02FF57) (tstamp 62AEFA1A) (at 161.417 118.0465) (descr "6-pin TSOT23 package, http://cds.linear.com/docs/en/packaging/SOT_6_05-08-1636.pdf") (tags "TSOT-23-6 MK06A TSOT-6") (path /62AD2C67) (attr smd) (fp_text reference U3 (at -0.0635 2.4765) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value DW01A (at 0 2.5) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 2.17 1.7) (end -2.17 1.7) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.17 1.7) (end 2.17 -1.7) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.17 -1.7) (end -2.17 1.7) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.17 -1.7) (end 2.17 -1.7) (layer F.CrtYd) (width 0.05)) (fp_line (start 0.88 -1.45) (end 0.88 1.45) (layer F.Fab) (width 0.1)) (fp_line (start 0.88 1.45) (end -0.88 1.45) (layer F.Fab) (width 0.1)) (fp_line (start -0.88 -1) (end -0.88 1.45) (layer F.Fab) (width 0.1)) (fp_line (start 0.88 -1.45) (end -0.43 -1.45) (layer F.Fab) (width 0.1)) (fp_line (start -0.88 -1) (end -0.43 -1.45) (layer F.Fab) (width 0.1)) (fp_line (start 0.88 -1.51) (end -1.55 -1.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.88 1.56) (end 0.88 1.56) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.075))) ) (pad 1 smd rect (at -1.31 -0.95) (size 1.22 0.65) (layers F.Cu F.Paste F.Mask) (net 31 "Net-(U2-Pad4)")) (pad 2 smd rect (at -1.31 0) (size 1.22 0.65) (layers F.Cu F.Paste F.Mask) (net 36 "Net-(R5-Pad2)")) (pad 3 smd rect (at -1.31 0.95) (size 1.22 0.65) (layers F.Cu F.Paste F.Mask) (net 40 "Net-(U2-Pad5)")) (pad 4 smd rect (at 1.31 0.95) (size 1.22 0.65) (layers F.Cu F.Paste F.Mask) (net 41 "Net-(U3-Pad4)")) (pad 5 smd rect (at 1.31 0) (size 1.22 0.65) (layers F.Cu F.Paste F.Mask) (net 33 "Net-(C4-Pad1)")) (pad 6 smd rect (at 1.31 -0.95) (size 1.22 0.65) (layers F.Cu F.Paste F.Mask) (net 2 "Net-(BT1-Pad2)")) (model ${KISYS3DMOD}/Package_TO_SOT_SMD.3dshapes/TSOT-23-6.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Diode_SMD:D_MicroMELF (layer F.Cu) (tedit 5D768594) (tstamp 62AF6DE2) (at 139.065 118.745) (descr "Diode, MicroMELF, Reflow Soldering, http://www.vishay.com/docs/85597/bzm55.pdf") (tags "MicroMELF Diode") (path /62B0628F) (attr smd) (fp_text reference D3 (at 0 1.651 180) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value D (at 0 1.5) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 0.8 -0.78) (end -1.36 -0.78) (layer F.SilkS) (width 0.12)) (fp_line (start -1.36 -0.78) (end -1.36 0.78) (layer F.SilkS) (width 0.12)) (fp_line (start -1.36 0.78) (end 0.8 0.78) (layer F.SilkS) (width 0.12)) (fp_line (start 0.25 0) (end 0.75 0) (layer F.Fab) (width 0.1)) (fp_line (start -0.25 0) (end 0.25 -0.25) (layer F.Fab) (width 0.1)) (fp_line (start 0.25 -0.25) (end 0.25 0.25) (layer F.Fab) (width 0.1)) (fp_line (start 0.25 0.25) (end -0.25 0) (layer F.Fab) (width 0.1)) (fp_line (start -0.25 0) (end -0.75 0) (layer F.Fab) (width 0.1)) (fp_line (start -0.25 -0.25) (end -0.25 0.25) (layer F.Fab) (width 0.1)) (fp_line (start -0.95 -0.575) (end 0.95 -0.575) (layer F.Fab) (width 0.1)) (fp_line (start 0.95 -0.575) (end 0.95 0.575) (layer F.Fab) (width 0.1)) (fp_line (start 0.95 0.575) (end -0.95 0.575) (layer F.Fab) (width 0.1)) (fp_line (start -0.95 0.575) (end -0.95 -0.575) (layer F.Fab) (width 0.1)) (fp_line (start -1.45 -0.85) (end 1.45 -0.85) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.45 -0.85) (end -1.45 0.85) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.45 0.85) (end 1.45 -0.85) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.45 0.85) (end -1.45 0.85) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 -1.5) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 1 smd rect (at -0.8 0) (size 0.8 1.2) (layers F.Cu F.Paste F.Mask) (net 1 +BATT)) (pad 2 smd rect (at 0.8 0) (size 0.8 1.2) (layers F.Cu F.Paste F.Mask) (net 4 "Net-(BZ1-Pad2)")) (model ${KISYS3DMOD}/Diode_SMD.3dshapes/D_MicroMELF.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 (layer B.Cu) (tedit 5D3C0721) (tstamp 62B9DE99) (at 160.782 96.266) (descr "USB Type-C receptacle for USB 2.0 and PD, http://www.krhro.com/uploads/soft/180320/1-1P320120243.pdf") (tags "usb usb-c 2.0 pd") (path /62BA611A) (attr smd) (fp_text reference P1 (at 0 0) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value USB_C_Plug (at 0 -5.1) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_line (start -4.7 -2) (end -4.7 -3.9) (layer B.SilkS) (width 0.12)) (fp_line (start -4.7 1.9) (end -4.7 -0.1) (layer B.SilkS) (width 0.12)) (fp_line (start 4.7 -2) (end 4.7 -3.9) (layer B.SilkS) (width 0.12)) (fp_line (start 4.7 1.9) (end 4.7 -0.1) (layer B.SilkS) (width 0.12)) (fp_line (start 5.32 5.27) (end 5.32 -4.15) (layer B.CrtYd) (width 0.05)) (fp_line (start -5.32 5.27) (end -5.32 -4.15) (layer B.CrtYd) (width 0.05)) (fp_line (start -5.32 -4.15) (end 5.32 -4.15) (layer B.CrtYd) (width 0.05)) (fp_line (start -5.32 5.27) (end 5.32 5.27) (layer B.CrtYd) (width 0.05)) (fp_line (start 4.47 3.65) (end 4.47 -3.65) (layer B.Fab) (width 0.1)) (fp_line (start -4.47 -3.65) (end 4.47 -3.65) (layer B.Fab) (width 0.1)) (fp_line (start -4.47 3.65) (end -4.47 -3.65) (layer B.Fab) (width 0.1)) (fp_line (start -4.47 3.65) (end 4.47 3.65) (layer B.Fab) (width 0.1)) (fp_line (start -4.7 -3.9) (end 4.7 -3.9) (layer B.SilkS) (width 0.12)) (fp_text user %R (at 0 0) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (pad S1 thru_hole oval (at 4.32 -1.05) (size 1 1.6) (drill oval 0.6 1.2) (layers *.Cu *.Mask) (net 5 GND)) (pad "" np_thru_hole circle (at 2.89 2.6) (size 0.65 0.65) (drill 0.65) (layers *.Cu *.Mask)) (pad S1 thru_hole oval (at -4.32 -1.05) (size 1 1.6) (drill oval 0.6 1.2) (layers *.Cu *.Mask) (net 5 GND)) (pad "" np_thru_hole circle (at -2.89 2.6) (size 0.65 0.65) (drill 0.65) (layers *.Cu *.Mask)) (pad S1 thru_hole oval (at -4.32 3.13) (size 1 2.1) (drill oval 0.6 1.7) (layers *.Cu *.Mask) (net 5 GND)) (pad S1 thru_hole oval (at 4.32 3.13) (size 1 2.1) (drill oval 0.6 1.7) (layers *.Cu *.Mask) (net 5 GND)) (pad A6 smd rect (at -0.25 4.045) (size 0.3 1.45) (layers B.Cu B.Paste B.Mask) (net 45 "Net-(P1-PadA6)")) (pad B5 smd rect (at 1.75 4.045) (size 0.3 1.45) (layers B.Cu B.Paste B.Mask) (net 46 "Net-(P1-PadB5)")) (pad A8 smd rect (at 1.25 4.045) (size 0.3 1.45) (layers B.Cu B.Paste B.Mask) (net 47 "Net-(P1-PadA8)")) (pad B6 smd rect (at 0.75 4.045) (size 0.3 1.45) (layers B.Cu B.Paste B.Mask)) (pad A7 smd rect (at 0.25 4.045) (size 0.3 1.45) (layers B.Cu B.Paste B.Mask) (net 48 "Net-(P1-PadA7)")) (pad B7 smd rect (at -0.75 4.045) (size 0.3 1.45) (layers B.Cu B.Paste B.Mask)) (pad A5 smd rect (at -1.25 4.045) (size 0.3 1.45) (layers B.Cu B.Paste B.Mask) (net 49 "Net-(P1-PadA5)")) (pad B8 smd rect (at -1.75 4.045) (size 0.3 1.45) (layers B.Cu B.Paste B.Mask) (net 50 "Net-(P1-PadB8)")) (pad A12 smd rect (at 3.25 4.045) (size 0.6 1.45) (layers B.Cu B.Paste B.Mask) (net 5 GND)) (pad B4 smd rect (at 2.45 4.045) (size 0.6 1.45) (layers B.Cu B.Paste B.Mask) (net 3 +5V)) (pad A4 smd rect (at -2.45 4.045) (size 0.6 1.45) (layers B.Cu B.Paste B.Mask) (net 3 +5V)) (pad A1 smd rect (at -3.25 4.045) (size 0.6 1.45) (layers B.Cu B.Paste B.Mask) (net 5 GND)) (pad B12 smd rect (at -3.25 4.045) (size 0.6 1.45) (layers B.Cu B.Paste B.Mask) (net 5 GND)) (pad B9 smd rect (at -2.45 4.045) (size 0.6 1.45) (layers B.Cu B.Paste B.Mask) (net 3 +5V)) (pad A9 smd rect (at 2.45 4.045) (size 0.6 1.45) (layers B.Cu B.Paste B.Mask) (net 3 +5V)) (pad B1 smd rect (at 3.25 4.045) (size 0.6 1.45) (layers B.Cu B.Paste B.Mask) (net 5 GND)) (model ${KISYS3DMOD}/Connector_USB.3dshapes/USB_C_Receptacle_HRO_TYPE-C-31-M-12.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module MountingHole:MountingHole_2.5mm (layer F.Cu) (tedit 56D1B4CB) (tstamp 62BC1E80) (at 173.609 94.869) (descr "Mounting Hole 2.5mm, no annular") (tags "mounting hole 2.5mm no annular") (path /62D1A6E2) (attr virtual) (fp_text reference H1 (at 0 -3.5) (layer F.SilkS) hide (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value MountingHole (at 0 3.5) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_circle (center 0 0) (end 2.5 0) (layer Cmts.User) (width 0.15)) (fp_circle (center 0 0) (end 2.75 0) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0.3 0) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 1 np_thru_hole circle (at 0 0) (size 2.5 2.5) (drill 2.5) (layers *.Cu *.Mask)) ) (module MountingHole:MountingHole_2.5mm (layer F.Cu) (tedit 56D1B4CB) (tstamp 62BC1E88) (at 173.609 124.587) (descr "Mounting Hole 2.5mm, no annular") (tags "mounting hole 2.5mm no annular") (path /62D1C178) (attr virtual) (fp_text reference H2 (at 0 -3.5) (layer F.SilkS) hide (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value MountingHole (at 0 3.5) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_circle (center 0 0) (end 2.75 0) (layer F.CrtYd) (width 0.05)) (fp_circle (center 0 0) (end 2.5 0) (layer Cmts.User) (width 0.15)) (fp_text user %R (at 0.3 0) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 1 np_thru_hole circle (at 0 0) (size 2.5 2.5) (drill 2.5) (layers *.Cu *.Mask)) ) (module MountingHole:MountingHole_2.5mm (layer F.Cu) (tedit 56D1B4CB) (tstamp 62BC1E90) (at 91.821 124.587) (descr "Mounting Hole 2.5mm, no annular") (tags "mounting hole 2.5mm no annular") (path /62D1BA2E) (attr virtual) (fp_text reference H3 (at 0 -3.5) (layer F.SilkS) hide (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value MountingHole (at 0 3.5) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_circle (center 0 0) (end 2.75 0) (layer F.CrtYd) (width 0.05)) (fp_circle (center 0 0) (end 2.5 0) (layer Cmts.User) (width 0.15)) (fp_text user %R (at 0.3 0) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 1 np_thru_hole circle (at 0 0) (size 2.5 2.5) (drill 2.5) (layers *.Cu *.Mask)) ) (module MountingHole:MountingHole_2.5mm (layer F.Cu) (tedit 56D1B4CB) (tstamp 62BC1E98) (at 91.821 94.869) (descr "Mounting Hole 2.5mm, no annular") (tags "mounting hole 2.5mm no annular") (path /62D1BE95) (attr virtual) (fp_text reference H4 (at 0 -3.5) (layer F.SilkS) hide (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value MountingHole (at 0 3.5) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_circle (center 0 0) (end 2.5 0) (layer Cmts.User) (width 0.15)) (fp_circle (center 0 0) (end 2.75 0) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0.3 0) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 1 np_thru_hole circle (at 0 0) (size 2.5 2.5) (drill 2.5) (layers *.Cu *.Mask)) ) (module Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical (layer F.Cu) (tedit 59FED5CC) (tstamp 62BC8B49) (at 148.844 125.349 270) (descr "Through hole straight pin header, 1x09, 2.54mm pitch, single row") (tags "Through hole pin header THT 1x09 2.54mm single row") (path /62DA51E7) (fp_text reference FRC (at -2.413 10.668 180) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value Free (at 0 22.65 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.8 -1.8) (end -1.8 -1.8) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.8 22.1) (end 1.8 -1.8) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.8 22.1) (end 1.8 22.1) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.8 -1.8) (end -1.8 22.1) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.33 -1.33) (end 0 -1.33) (layer F.SilkS) (width 0.12)) (fp_line (start -1.33 0) (end -1.33 -1.33) (layer F.SilkS) (width 0.12)) (fp_line (start -1.33 1.27) (end 1.33 1.27) (layer F.SilkS) (width 0.12)) (fp_line (start 1.33 1.27) (end 1.33 21.65) (layer F.SilkS) (width 0.12)) (fp_line (start -1.33 1.27) (end -1.33 21.65) (layer F.SilkS) (width 0.12)) (fp_line (start -1.33 21.65) (end 1.33 21.65) (layer F.SilkS) (width 0.12)) (fp_line (start -1.27 -0.635) (end -0.635 -1.27) (layer F.Fab) (width 0.1)) (fp_line (start -1.27 21.59) (end -1.27 -0.635) (layer F.Fab) (width 0.1)) (fp_line (start 1.27 21.59) (end -1.27 21.59) (layer F.Fab) (width 0.1)) (fp_line (start 1.27 -1.27) (end 1.27 21.59) (layer F.Fab) (width 0.1)) (fp_line (start -0.635 -1.27) (end 1.27 -1.27) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 10.16) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 1 thru_hole rect (at 0 0 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 10 /P2.0)) (pad 2 thru_hole oval (at 0 2.54 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 44 /P1.6)) (pad 3 thru_hole oval (at 0 5.08 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 11 /P1.5)) (pad 4 thru_hole oval (at 0 7.62 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 12 /P1.4)) (pad 5 thru_hole oval (at 0 10.16 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 13 /P1.3)) (pad 6 thru_hole oval (at 0 12.7 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 14 /P1.2)) (pad 7 thru_hole oval (at 0 15.24 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 15 /P1.1)) (pad 8 thru_hole oval (at 0 17.78 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 16 /P1.0)) (pad 9 thru_hole oval (at 0 20.32 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 17 /P0.7)) (model ${KISYS3DMOD}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x09_P2.54mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (gr_line (start 176.53 91.948) (end 176.53 127.508) (layer Edge.Cuts) (width 0.1)) (gr_line (start 88.9 91.948) (end 176.53 91.948) (layer Edge.Cuts) (width 0.1)) (gr_line (start 88.9 127.508) (end 88.9 91.948) (layer Edge.Cuts) (width 0.1)) (gr_line (start 176.53 127.508) (end 88.9 127.508) (layer Edge.Cuts) (width 0.1)) (zone (net 0) (net_name "") (layers F&B.Cu) (tstamp 0) (hatch edge 0.508) (connect_pads (clearance 0.2)) (min_thickness 0.254) (keepout (tracks not_allowed) (vias not_allowed) (copperpour not_allowed)) (fill (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508)) (polygon (pts (xy 125.857 127.635) (xy 109.347 127.635) (xy 109.347 121.666) (xy 125.857 121.666) ) ) ) )