# PCSX2 - General Guide
PCSX2 is a free and open-source PlayStation 2 (PS2) emulator.
---
### PCSX2 Links
| Resource | Link |
|----------|------|
| PCSX2 Compability List | [Link](https://pcsx2.net/compat/) |
| PCSX2 Documentation | [Link](https://pcsx2.net/docs/) |
| PCSX2 Github | [Link](https://github.com/PCSX2/pcsx2) |
| PCSX2 Website | [Link](https://pcsx2.net/) |
---
## Where to put the games
Playstation 2 games should be put under the `retrodeck/roms/ps2/` directory.
---
## What file formats are supported?
| File Format | Description |
|-------------|-------------|
| .iso| Standard ISO disc image |
| .bin + .cue | Binary disc image file with cue sheet |
| .chd| Compressed Hunks of Data **(Recommended)** |
---
## Does PCSX2 require BIOS, Game Data or Firmware files?
Yes, there exists several PS2 BIOS from different regions and hardware versions.
You need at least one.
| Region | Typical BIOS Region / Use Case |
|--------------|----------------------------------------|
| NTSC-U (USA / North America) | Used for North American PS2 games (60 Hz, NTSC format) |
| PAL (Europe / Australia)| Used for European / PAL-region games (50 Hz) |
| NTSC-J (Japan / Asia) | Required for Japanese PS2 games and imports (NTSC format)|
**Read more here:**
- [PCSX2 - BIOS Guide](https://pcsx2.net/docs/setup/bios/)
### Where to put the PS2 BIOS?
Directly into the directory:
`retrodeck/bios/`
---
## Directory structure
| Type | Directory | Comment |
|:-------------:|:--------------------------------------------------|:-------------------|
| BIOS | `retrodeck/bios/` | |
| Cheats | `retrodeck/cheats/PCSX2/` | PCSX2/cheats |
| Config | `~/.var/app/net.retrodeck.retrodeck/config/PCSX2/` | |
| Logs | `retrodeck/logs/PCSX2/` | PCSX2/logs |
| Mods | `retrodeck/mods/PCSX2/patches/` | PCSX2/patches |
| ROMs | `retrodeck/roms/ps2/` | |
| Saves | `retrodeck/saves/ps2/pcsx2/` | |
| Memory Cards | `retrodeck/saves/ps2/pcsx2/memcards/` | |
| Screenshots | `retrodeck/screenshots/PCSX2/` | |
| States | `retrodeck/states/ps2/pcsx2/` | |
| Texture Packs | `retrodeck/texture_packs/PCSX2/textures/` | PCSX2/textures |
| Videos | `retrodeck/videos/PCSX2/` | |
---
## Enable Cheats
Place your `.pnach` files in: **retrodeck/cheats/pcsx2/**
1. Open **PCSX2** via the **RetroDECK Configurator**.
2. **Right-click** the game you want to configure and select **Properties**.
3. Open the **Cheats** tab and enable **Cheats**.
4. Check **Enabled** next to the cheat you want to activate.
---
## Enable Patches: Widescreen and more
1. Open **PCSX2** via the **RetroDECK Configurator**.
2. **Right-click** the game you want to configure and click on **Properties**.
3. Open **Patches** and enable the patch (if there is one) by checking **Enabled**.
---
## Different Settings Per Game
1. Open **PCSX2** via the **RetroDECK Configurator**.
2. **Right-click** the game you want to configure and click on **Properties**.
3. Adjust any settings you want and apply.
---
## Emulate the Multitap (PCSX2)
Multitap allows up to **8 players** on the PlayStation 2 by connecting 4 controllers to each controller port.
**Note:** Most games do not support this feature and some may not work with it enabled.
1. Open **PCSX2** via the **RetroDECK Configurator**.
2. Go to **Settings → Controllers → Controller Multitap**.
3. Enable/disable Multitap for **Port 1**, **Port 2**, or both by checking the box.
4. New controller slots (1A-1D and 2A-2D) will appear for mapping.
---
## Emulate the EyeToy (PCSX2)
Requires a **USB webcam** or **integrated webcam**.
1. Open **PCSX2** via the **RetroDECK Configurator**.
2. Go to **Settings → Controllers → USB Port**.
3. From the dropdown, select **Webcam (EyeToy)**.
4. Choose the **Device Name** of your connected camera.
---
## Configuring Language Settings
### PCSX2 GUI Language
PCSX2 typically follows your system locale if supported.
1. Open **PCSX2** via the **RetroDECK Configurator**.
2. Navigate to **Settings → Interface → Interface**.
3. Under **Preferences**, select your preferred language from the drop-down menu.
4. Close **PCSX2**.
### BIOS / In-Game Language
1. Open **PCSX2** via the **RetroDECK Configurator**.
2. Go to **Settings → BIOS**.
3. Under **Options and Patches**, uncheck **Fast Boot**, then close the menu.
4. Go to **System → Start BIOS**.
5. In the BIOS, navigate to **System Configuration → Language** and select your preferred language.
6. Exit the BIOS, return to **Settings → BIOS → Options and Patches** and re-enable **Fast Boot**.
7. Close **PCSX2**.
---
## Adding Texture Packs
**Note:** Some texture packs are made for specific game versions or regions. Ensure you have the correct game and textures. Each game has a unique `TITLEID`.
### Enable Custom Textures
Open **PCSX2** via the **RetroDECK Configurator**.
**Globally for All Games**
1. Go to **Settings → Graphics → Texture Replacement**.
2. Enable **Load Textures** and **Async Texture Loading**.
**Per Game**
1. In the PCSX2 interface, **right-click** the game and open the menu.
2. Go to **Game Properties → Graphic Settings → Texture Replacement**.
3. Enable **Load Textures** and **Async Texture Loading**.
### Adding Texture Packs
1. Extract texture pack files from `.zip` or other compressed formats.
2. Navigate to **`retrodeck/texture_packs/PCSX2/textures/`**.
3. Locate the correct **`TITLEID`** for your game.
4. Move the texture files into: **`retrodeck/texture_packs/PCSX2/textures/`**
5. If the textures match the game, they will load the next time the game is launched.
---
## Disc Swapping (In-Game)
Follow these steps to swap discs in PCSX2 without restarting your game:
1. Pause the game at the **"Insert Disc"** screen.
2. Open the **PCSX2 menu** (press **Esc** or your the **Open Menu Hotkey**).
3. Navigate to **System → Change Disc → ISO Selector**.
4. Select the next disc file (**ISO** or **CHD**) you want to load.
5. Resume the game, it should continue seamlessly from where you left off.
---