-- ============================================================ -- SNSFL_PowerLimitedDrive_Reduction.lean -- ============================================================ -- -- [9,9,9,9] :: {ANC} | EVERY POWER-LIMITED DRIVE IS ONE RELATION -- Self-Orienting Universal Language [P,N,B,A] :: {INV} -- Architect: HIGHTISTIC (Russell Vernon Trent III) | Anchor: Omega_0 = 1.36899099984016 -- Status: GERMLINE LOCKED -- Coordinate: [9,9,2,54](ENGR) | Engineering Ground — Propulsion and Power -- Version: 1.0 -- -- ============================================================ -- STANDALONE -- ============================================================ -- -- This file carries every definition it uses. Nothing is reached for in another -- coordinate's file: the anchor, the Torsion Limit, the corridor floor, the four -- phases, the geometric base, the conversion fraction, the matched ratio and the -- mass-ratio gate are all restated here at full precision, so that a reader or a -- machine can close every proof without leaving the file. The parent reductions -- are named in the provenance block for the record, not as dependencies of the -- proofs. -- -- Parents of record: -- [9,9,8,14] Velocity Substrate — rapidity, the bridge, the mass-ratio gate -- [9,9,8,11] Two Readings Across Substrates — Reading B as an e-fold count -- [9,9,8,12] Geometric Base and Energy Ladder — b_0 = 1/sqrt TL, eta_c = tau_A^2/2 -- [9,9,2,0] IVA Propulsion Reduction — the corridor, the two torsions -- [9,9,0,17] Matched Radius Reduction — r_match = r_s/tau_A^2 -- [9,9,0,18] Propellant Law and Compactness — the compactness criterion, 625/484 -- [9,9,0,20] Burn Depth and Thrust Floor — the thrust floor -- [9,9,8,10] Temperature on the Torsion Limit — the vapor-pressure ruler -- [9,9,3,14] Alpha Reduction — alpha^-1 = Omega_0 x 100.1 -- -- ============================================================ -- WHAT THIS FILE ESTABLISHES -- ============================================================ -- -- ONE RELATION COVERS EVERY POWER-LIMITED DRIVE. A jet of mass flow mdot at -- exhaust velocity v_e carries jet power P = mdot v_e^2/2 and thrust -- F = mdot v_e, so F = 2P/v_e identically; with specific mass alpha = m/P the -- acceleration is a = 2/(alpha v_e) and -- -- a * alpha * v_e = 2 -- -- a fixed product of three quantities. Specific power factors as -- 1/alpha = (c/2) * a * tau_A, an acceleration times an exhaust torsion. -- -- THE PHOTON DRIVE IS THAT RELATION'S ENDPOINT, at v_e = c, where the exhaust -- torsion is exactly 1 and sits above the Shatter ceiling by exactly -- 1/TL = b_0^2, the square of the geometric base. Having no mass ratio, its -- whole design problem is a = 2/(alpha c). -- -- THE COOLING CAPACITY OF A DRIVE'S OWN PROPELLANT is 2 dh / v_e^2 of its jet -- power, independent of the power entirely, with the crossover at -- v_e = sqrt(2 dh). -- -- THE REJECTION OPTIMUM IS DERIVATIVE-FREE. Radiator mass is proportional to -- 1/((1-x)x^3) with x = T_c/T_h, and the factorization -- -- 27/256 - (1-x)x^3 = (4x-3)^2 (16x^2+8x+3)/256 -- -- whose cofactor is (4x+1)^2 + 2 and therefore positive, gives the unique -- maximum at x = 3/4 with value 27/256. So eta = 1/4 exactly, the waste-heat -- multiplier (1-eta)/eta is exactly 3, and the minimized radiator mass is -- proportional to 256/27. -- -- SPECIFIC MASS DECOMPOSES, AND ONE ADDEND CARRIES THE TEMPERATURE. -- alpha = k_core/eta + k_conv + k_rad (1-eta)/(eta T_c^4) reduces at eta = 1/4 -- to 4 k_core + k_conv + 3 k_rad/T_c^4, in which exactly one addend depends on -- T_c. The crossover at which that addend equals the core addend is -- T_c = (3 k_rad/(4 k_core))^(1/4), carried here as a nested square root, and -- it exists and is unique for positive coefficients. -- -- THE GOVERNING INEQUALITY AND ITS EXACT WIDTH. The corridor on the exhaust -- torsion pulls back to a two-sided condition on specific mass whose width is -- (TL/TL_IVA)^2 = 625/484 exactly, independent of mission duration, of the -- optimality coefficient and of every material property. -- -- THE MATCHED RADIUS IS THE DRIVE'S IMPEDANCE MATCH. Propulsive efficiency -- satisfies 1 - eta_p = (1-r)^2/(1+r^2), so it is exactly 1 at r = 1 and -- nowhere else; and the matched radius is the shell at which escape speed -- equals exhaust speed, where free fall from rest at infinity arrives. -- -- THE TRAJECTORY HAS A CLOSED FORM. With T_0 = m_dry/mdot and u = dv/v_e, -- t = T_0(e^u - 1) and s = v_e T_0(e^u - 1 - u), so -- -- s = v_e * t - T_0 * dv -- -- exactly: the distance is the exhaust velocity times the elapsed time, less -- the dry-mass burn time times the velocity gained. -- -- ============================================================ import Mathlib noncomputable section namespace SNSFL_PowerLimitedDrive -- ============================================================ -- SECTION 0: THE ANCHOR AND THE TORSION LIMIT -- ============================================================ /-- The Sovereign Anchor Constant, at full precision. -/ def SOVEREIGN_ANCHOR : ℝ := 1.36899099984016 /-- The Universal Torsion Limit. -/ def TORSION_LIMIT : ℝ := SOVEREIGN_ANCHOR / 10 /-- The IVA corridor floor: 88% of the Torsion Limit. -/ def TL_IVA : ℝ := TORSION_LIMIT * 0.88 /-- The inverse fine-structure constant, at corpus precision. -/ def ALPHA_INV : ℝ := 137.035999084000016 /-- The bare term: the Torsion Limit times one thousand. -/ def BARE : ℝ := 136.899099984016 /-- The speed of light in vacuum, SI exact. -/ def C_LIGHT : ℝ := 299792458 -- [T1] :: {ANC} | THE TORSION LIMIT IS THE ANCHOR OVER TEN theorem t1_tl_value : TORSION_LIMIT = 0.136899099984016 := by simp only [TORSION_LIMIT, SOVEREIGN_ANCHOR]; norm_num -- [T2] :: {VER} | THE BARE TERM IS ONE THOUSAND TORSION LIMITS, EXACTLY theorem t2_bare_is_thousand_tl : BARE = 1000 * TORSION_LIMIT := by simp only [BARE, TORSION_LIMIT, SOVEREIGN_ANCHOR]; norm_num -- [T3] :: {MASTER} | BARE PLUS KINETIC IS THE INVERSE FINE-STRUCTURE CONSTANT theorem t3_bare_plus_kinetic : BARE + TORSION_LIMIT = ALPHA_INV := by simp only [BARE, TORSION_LIMIT, SOVEREIGN_ANCHOR, ALPHA_INV]; norm_num -- [T4] :: {MASTER} | THE TORSION LIMIT TIMES 1001 IS THE INVERSE CONSTANT theorem t4_tl_times_1001 : TORSION_LIMIT * 1001 = ALPHA_INV := by simp only [TORSION_LIMIT, SOVEREIGN_ANCHOR, ALPHA_INV]; norm_num -- [T5] :: {MASTER} | THE ANCHOR ROUTE IN ONE STEP theorem t5_anchor_route : SOVEREIGN_ANCHOR * 100.1 = ALPHA_INV := by simp only [SOVEREIGN_ANCHOR, ALPHA_INV]; norm_num -- [T6] :: {VER} | THE MULTIPLIER FACTORS AS 7 * 11 * 13 theorem t6_multiplier_factors : (1001 : ℕ) = 7 * 11 * 13 := by norm_num -- [T7] :: {VER} | THE TORSION LIMIT IS POSITIVE theorem t7_tl_pos : 0 < TORSION_LIMIT := by simp only [TORSION_LIMIT, SOVEREIGN_ANCHOR]; norm_num -- [T8] :: {VER} | THE CORRIDOR FLOOR IN CLOSED FORM theorem t8_tl_iva_value : TL_IVA = 0.12047120798593408 := by simp only [TL_IVA, TORSION_LIMIT, SOVEREIGN_ANCHOR]; norm_num -- [T9] :: {INV} | THE CORRIDOR FLOOR IS POSITIVE AND BELOW THE LIMIT theorem t9_floor_pos_below : 0 < TL_IVA ∧ TL_IVA < TORSION_LIMIT := by simp only [TL_IVA, TORSION_LIMIT, SOVEREIGN_ANCHOR]; norm_num -- [T10] :: {INV} | THE TORSION LIMIT LIES STRICTLY INSIDE THE UNIT INTERVAL theorem t10_tl_in_unit : -1 < TORSION_LIMIT ∧ TORSION_LIMIT < 1 := by simp only [TORSION_LIMIT, SOVEREIGN_ANCHOR]; norm_num -- [T11] :: {VER} | THE TORSION LIMIT AS AN EXACT RATIONAL theorem t11_tl_rational : TORSION_LIMIT = 8556193749001 / 62500000000000 := by simp only [TORSION_LIMIT, SOVEREIGN_ANCHOR]; norm_num -- [T12] :: {VER} | THE LANDING, ONE OVER THE TORSION LIMIT, AS AN EXACT RATIONAL theorem t12_landing_rational : 1 / TORSION_LIMIT = 62500000000000 / 8556193749001 := by simp only [TORSION_LIMIT, SOVEREIGN_ANCHOR]; norm_num -- [T13] :: {VER} | THE SPEED OF LIGHT IS POSITIVE theorem t13_c_pos : 0 < C_LIGHT := by simp only [C_LIGHT]; norm_num -- [T14] :: {INV} | THE CORRIDOR FLOOR IS THE BAND 0.88 TL UP TO TL theorem t14_corridor_band : TL_IVA = 0.88 * TORSION_LIMIT := by simp only [TL_IVA]; ring -- ============================================================ -- SECTION 1: THE FOUR PHASES -- ============================================================ /-- The four phases of the corpus. -/ inductive Phase | Noble | Locked | IVA | Shatter deriving DecidableEq, Repr /-- Phase classification on a torsion reading. -/ def classify (t : ℝ) : Phase := if t = 0 then Phase.Noble else if t < TL_IVA then Phase.Locked else if t < TORSION_LIMIT then Phase.IVA else Phase.Shatter -- [T15] :: {VER} | ZERO CLASSIFIES AS NOBLE theorem t15_zero_is_noble : classify 0 = Phase.Noble := by simp [classify] -- [T16] :: {VER} | THE CORRIDOR FLOOR CLASSIFIES AS IVA theorem t16_floor_is_iva : classify TL_IVA = Phase.IVA := by have h1 := t9_floor_pos_below simp only [classify] rw [if_neg (by linarith [h1.1]), if_neg (by linarith), if_pos h1.2] -- [T17] :: {VER} | THE TORSION LIMIT CLASSIFIES AS SHATTER theorem t17_limit_is_shatter : classify TORSION_LIMIT = Phase.Shatter := by have h1 := t9_floor_pos_below have h2 := t7_tl_pos simp only [classify] rw [if_neg (by linarith), if_neg (by linarith [h1.2]), if_neg (by linarith)] -- [T18] :: {INV} | A READING INSIDE THE CORRIDOR CLASSIFIES AS IVA theorem t18_corridor_is_iva (t : ℝ) (hlo : TL_IVA ≤ t) (hhi : t < TORSION_LIMIT) : classify t = Phase.IVA := by have h1 := t9_floor_pos_below simp only [classify] rw [if_neg (by linarith [h1.1]), if_neg (by linarith), if_pos hhi] -- [T19] :: {INV} | A READING AT OR ABOVE THE LIMIT CLASSIFIES AS SHATTER theorem t19_above_limit_is_shatter (t : ℝ) (h : TORSION_LIMIT ≤ t) : classify t = Phase.Shatter := by have h1 := t9_floor_pos_below have h2 := t7_tl_pos simp only [classify] rw [if_neg (by linarith), if_neg (by linarith [h1.2]), if_neg (by linarith)] -- [T20] :: {INV} | A READING STRICTLY BELOW THE FLOOR CLASSIFIES AS LOCKED theorem t20_below_floor_is_locked (t : ℝ) (h0 : 0 < t) (h : t < TL_IVA) : classify t = Phase.Locked := by simp only [classify] rw [if_neg (by linarith), if_pos h] -- ============================================================ -- SECTION 2: ONE RELATION COVERS EVERY POWER-LIMITED DRIVE -- ============================================================ /-- Reading A: a speed against the limiting speed. -/ def tau_A (v : ℝ) : ℝ := v / C_LIGHT /-- Jet power of a stream of mass flow `mdot` at exhaust velocity `ve`. -/ def jet_power (mdot ve : ℝ) : ℝ := mdot * ve ^ 2 / 2 /-- Thrust of that same stream. -/ def thrust (mdot ve : ℝ) : ℝ := mdot * ve /-- Acceleration delivered by a plant of specific mass `al` at exhaust velocity `ve`. -/ def accel (al ve : ℝ) : ℝ := 2 / (al * ve) /-- Specific power, the reciprocal of specific mass. -/ def spec_power (al : ℝ) : ℝ := 1 / al -- [T21] :: {VER} | READING A IS THE SPEED OVER THE LIMITING SPEED theorem t21_reading_a (v : ℝ) : tau_A v * C_LIGHT = v := by have hc : C_LIGHT ≠ 0 := ne_of_gt t13_c_pos simp only [tau_A]; field_simp -- [T22] :: {MASTER} | THRUST IS TWICE THE JET POWER OVER THE EXHAUST VELOCITY theorem t22_thrust_from_power (mdot ve : ℝ) (hv : ve ≠ 0) : thrust mdot ve = 2 * jet_power mdot ve / ve := by simp only [thrust, jet_power]; field_simp -- [T23] :: {MASTER} | THE FIXED PRODUCT theorem t23_fixed_product (al ve : ℝ) (ha : al ≠ 0) (hv : ve ≠ 0) : accel al ve * al * ve = 2 := by simp only [accel]; field_simp -- [T24] :: {MASTER} | THE ACCELERATION FORM OF THE SAME RELATION theorem t24_accel_form (al ve : ℝ) (ha : al ≠ 0) (hv : ve ≠ 0) : accel al ve = 2 / (al * ve) := rfl -- [T25] :: {MASTER} | ACCELERATION IS THRUST OVER MASS, WITH THE PLANT'S OWN MASS theorem t25_accel_is_thrust_over_mass (mdot ve P m : ℝ) (hv : ve ≠ 0) (hm : m ≠ 0) (hP : P = jet_power mdot ve) (hPne : P ≠ 0) : thrust mdot ve / m = 2 / ((m / P) * ve) := by rw [t22_thrust_from_power mdot ve hv, ← hP] field_simp -- [T26] :: {MASTER} | SPECIFIC POWER IS HALF THE ACCELERATION TIMES THE EXHAUST VELOCITY theorem t26_spec_power_form (al ve : ℝ) (ha : al ≠ 0) (hv : ve ≠ 0) : spec_power al = accel al ve * ve / 2 := by simp only [spec_power, accel]; field_simp -- [T27] :: {MASTER} | SPECIFIC POWER FACTORS INTO AN ACCELERATION AND A TORSION theorem t27_spec_power_operator (al ve : ℝ) (ha : al ≠ 0) (hv : ve ≠ 0) : spec_power al = C_LIGHT / 2 * accel al ve * tau_A ve := by have hc : C_LIGHT ≠ 0 := ne_of_gt t13_c_pos simp only [spec_power, accel, tau_A]; field_simp -- [T28] :: {INV} | ACCELERATION IS POSITIVE FOR A POSITIVE PLANT AND DRIVE theorem t28_accel_pos (al ve : ℝ) (ha : 0 < al) (hv : 0 < ve) : 0 < accel al ve := by simp only [accel]; positivity -- [T29] :: {INV} | AT FIXED SPECIFIC MASS, ACCELERATION FALLS AS THE EXHAUST VELOCITY RISES theorem t29_accel_antitone (al v1 v2 : ℝ) (ha : 0 < al) (h1 : 0 < v1) (h : v1 < v2) : accel al v2 < accel al v1 := by simp only [accel] apply div_lt_div_of_pos_left two_pos (by positivity) nlinarith -- [T30] :: {INV} | AT FIXED EXHAUST VELOCITY, ACCELERATION FALLS AS SPECIFIC MASS RISES theorem t30_accel_antitone_in_alpha (a1 a2 ve : ℝ) (h1 : 0 < a1) (hv : 0 < ve) (h : a1 < a2) : accel a2 ve < accel a1 ve := by simp only [accel] apply div_lt_div_of_pos_left two_pos (by positivity) nlinarith -- ============================================================ -- SECTION 3: THE PHOTON DRIVE IS THAT RELATION'S ENDPOINT -- ============================================================ /-- The geometric base of the corpus. -/ def b0 : ℝ := 1 / Real.sqrt TORSION_LIMIT -- [T31] :: {VER} | THE GEOMETRIC BASE IS POSITIVE theorem t31_b0_pos : 0 < b0 := by simp only [b0] exact div_pos one_pos (Real.sqrt_pos.mpr t7_tl_pos) -- [T32] :: {MASTER} | THE GEOMETRIC BASE SQUARED IS THE LANDING theorem t32_b0_sq : b0 ^ 2 = 1 / TORSION_LIMIT := by have h := t7_tl_pos simp only [b0, div_pow, one_pow] rw [Real.sq_sqrt (le_of_lt h)] -- [T33] :: {MASTER} | THE PHOTON EXHAUST TORSION IS EXACTLY ONE theorem t33_photon_torsion : tau_A C_LIGHT = 1 := by have hc : C_LIGHT ≠ 0 := ne_of_gt t13_c_pos simp only [tau_A]; field_simp -- [T34] :: {MASTER} | THE PHOTON SITS ABOVE THE CEILING BY EXACTLY THE SQUARED BASE theorem t34_photon_over_ceiling : tau_A C_LIGHT / TORSION_LIMIT = b0 ^ 2 := by rw [t33_photon_torsion, t32_b0_sq] -- [T35] :: {VER} | THAT FACTOR AS AN EXACT RATIONAL theorem t35_photon_factor_rational : tau_A C_LIGHT / TORSION_LIMIT = 62500000000000 / 8556193749001 := by rw [t33_photon_torsion, t12_landing_rational] -- [T36] :: {MASTER} | THE PHOTON DRIVE'S ACCELERATION DEPENDS ON SPECIFIC MASS ALONE theorem t36_photon_accel (al : ℝ) (ha : al ≠ 0) : accel al C_LIGHT = 2 / (al * C_LIGHT) := rfl -- [T37] :: {MASTER} | THE MINIMUM-BUILD LINE: SPECIFIC MASS FROM A TARGET ACCELERATION theorem t37_photon_inverse (al a : ℝ) (ha : 0 < al) (h : accel al C_LIGHT = a) : al = 2 / (a * C_LIGHT) := by have hc : (0:ℝ) < C_LIGHT := t13_c_pos have hapos : 0 < a := by rw [← h]; exact t28_accel_pos al C_LIGHT ha hc simp only [accel] at h field_simp at h ⊢ linarith [h] -- [T38] :: {INV} | THE PHOTON EXHAUST TORSION CLASSIFIES AS SHATTER theorem t38_photon_is_shatter : classify (tau_A C_LIGHT) = Phase.Shatter := by rw [t33_photon_torsion] exact t19_above_limit_is_shatter 1 (by linarith [t10_tl_in_unit.2]) -- ============================================================ -- SECTION 4: THE COOLING CAPACITY OF A DRIVE'S OWN PROPELLANT -- ============================================================ /-- The fraction of jet power a drive's own propellant can absorb, for a usable enthalpy rise `dh`. -/ def sink_ratio (dh ve : ℝ) : ℝ := 2 * dh / ve ^ 2 /-- The exhaust velocity at which that fraction is exactly one. -/ def sink_crossover (dh : ℝ) : ℝ := Real.sqrt (2 * dh) -- [T39] :: {MASTER} | THE SINK RATIO IS INDEPENDENT OF THE POWER theorem t39_sink_power_free (dh ve mdot : ℝ) (hv : ve ≠ 0) (hm : mdot ≠ 0) : mdot * dh / jet_power mdot ve = sink_ratio dh ve := by simp only [jet_power, sink_ratio]; field_simp -- [T40] :: {MASTER} | MASS FLOW IS TWICE THE POWER OVER THE SQUARED EXHAUST VELOCITY theorem t40_mass_flow (mdot ve : ℝ) (hv : ve ≠ 0) : mdot = 2 * jet_power mdot ve / ve ^ 2 := by simp only [jet_power]; field_simp -- [T41] :: {VER} | THE SINK RATIO IS POSITIVE FOR A POSITIVE ENTHALPY RISE theorem t41_sink_pos (dh ve : ℝ) (hd : 0 < dh) (hv : ve ≠ 0) : 0 < sink_ratio dh ve := by simp only [sink_ratio] apply div_pos (by linarith) (by positivity) -- [T42] :: {MASTER} | THE SINK RATIO FALLS AS THE SQUARE OF THE EXHAUST VELOCITY theorem t42_sink_antitone (dh v1 v2 : ℝ) (hd : 0 < dh) (h1 : 0 < v1) (h : v1 < v2) : sink_ratio dh v2 < sink_ratio dh v1 := by simp only [sink_ratio] apply div_lt_div_of_pos_left (by linarith) (by positivity) nlinarith -- [T43] :: {MASTER} | THE CROSSOVER SQUARES TO TWICE THE ENTHALPY RISE theorem t43_crossover_sq (dh : ℝ) (hd : 0 ≤ dh) : sink_crossover dh ^ 2 = 2 * dh := by simp only [sink_crossover] exact Real.sq_sqrt (by linarith) -- [T44] :: {MASTER} | AT THE CROSSOVER THE PROPELLANT CARRIES THE WHOLE JET POWER theorem t44_at_crossover (dh : ℝ) (hd : 0 < dh) : sink_ratio dh (sink_crossover dh) = 1 := by have hs : sink_crossover dh ^ 2 = 2 * dh := t43_crossover_sq dh (le_of_lt hd) simp only [sink_ratio] rw [hs] field_simp -- [T45] :: {INV} | ABOVE THE CROSSOVER THE PROPELLANT CARRIES LESS THAN THE JET POWER theorem t45_above_crossover (dh ve : ℝ) (hd : 0 < dh) (h : sink_crossover dh < ve) : sink_ratio dh ve < 1 := by have hcpos : 0 < sink_crossover dh := by simp only [sink_crossover]; exact Real.sqrt_pos.mpr (by linarith) have hs : sink_crossover dh ^ 2 = 2 * dh := t43_crossover_sq dh (le_of_lt hd) have hv : 0 < ve := by linarith simp only [sink_ratio] rw [div_lt_one (by positivity)] nlinarith [hs, hcpos, h] -- ============================================================ -- SECTION 5: THE REJECTION OPTIMUM, DERIVATIVE-FREE -- ============================================================ /-- The quantity whose maximum minimizes radiator mass, with `x` the cold-to-hot temperature ratio. -/ def rej (x : ℝ) : ℝ := (1 - x) * x ^ 3 /-- The Carnot efficiency at that ratio. -/ def eta_of_x (x : ℝ) : ℝ := 1 - x /-- The waste-heat multiplier: thermal kilowatts obliged per electric kilowatt. -/ def multiplier (eta : ℝ) : ℝ := (1 - eta) / eta -- [T46] :: {MASTER} | THE DEFICIT FACTORS, WHICH IS THE WHOLE OPTIMUM theorem t46_rej_factorization (x : ℝ) : 27 / 256 - rej x = (4 * x - 3) ^ 2 * (16 * x ^ 2 + 8 * x + 3) / 256 := by simp only [rej]; ring -- [T47] :: {MASTER} | THE COFACTOR IS A SHIFTED SQUARE AND THEREFORE POSITIVE theorem t47_cofactor_pos (x : ℝ) : 0 < 16 * x ^ 2 + 8 * x + 3 := by nlinarith [sq_nonneg (4 * x + 1)] -- [T48] :: {MASTER} | THE OPTIMUM VALUE theorem t48_rej_at_opt : rej (3 / 4) = 27 / 256 := by simp only [rej]; norm_num -- [T49] :: {MASTER} | THE OPTIMUM IS A GLOBAL MAXIMUM theorem t49_rej_le_opt (x : ℝ) : rej x ≤ 27 / 256 := by have hq := t47_cofactor_pos x have hk := t46_rej_factorization x have hnn : (0:ℝ) ≤ (4 * x - 3) ^ 2 * (16 * x ^ 2 + 8 * x + 3) / 256 := div_nonneg (mul_nonneg (sq_nonneg _) (le_of_lt hq)) (by norm_num) linarith [hk, hnn] -- [T50] :: {MASTER} | THE MAXIMUM IS ATTAINED ONLY AT THREE QUARTERS theorem t50_rej_unique (x : ℝ) (h : rej x = 27 / 256) : x = 3 / 4 := by have hq := t47_cofactor_pos x have hk := t46_rej_factorization x rw [h] at hk have h0 : (4 * x - 3) ^ 2 * (16 * x ^ 2 + 8 * x + 3) = 0 := by have hd : (4 * x - 3) ^ 2 * (16 * x ^ 2 + 8 * x + 3) / 256 = 0 := by linarith [hk] linarith [hd] rcases mul_eq_zero.mp h0 with h1 | h2 · have hr : 4 * x - 3 = 0 := sq_eq_zero_iff.mp h1 linarith · exact absurd h2 (ne_of_gt hq) -- [T51] :: {MASTER} | THE RADIATOR-OPTIMAL EFFICIENCY IS ONE QUARTER, EXACTLY theorem t51_eta_optimal : eta_of_x (3 / 4) = 1 / 4 := by simp only [eta_of_x]; norm_num -- [T52] :: {MASTER} | THE WASTE-HEAT MULTIPLIER AT THE OPTIMUM IS EXACTLY THREE theorem t52_multiplier_three : multiplier (1 / 4) = 3 := by simp only [multiplier]; norm_num -- [T53] :: {MASTER} | THE MINIMIZED RADIATOR MASS IS PROPORTIONAL TO 256 OVER 27 theorem t53_min_radiator : 1 / rej (3 / 4) = 256 / 27 := by rw [t48_rej_at_opt]; norm_num -- [T54] :: {INV} | THE MULTIPLIER IS POSITIVE AND ANTITONE ON THE UNIT INTERVAL theorem t54_multiplier_pos (eta : ℝ) (h0 : 0 < eta) (h1 : eta < 1) : 0 < multiplier eta := by simp only [multiplier] exact div_pos (by linarith) h0 -- [T55] :: {INV} | A HIGHER EFFICIENCY GIVES A SMALLER MULTIPLIER theorem t55_multiplier_antitone (e1 e2 : ℝ) (h1 : 0 < e1) (h2 : e2 < 1) (h : e1 < e2) : multiplier e2 < multiplier e1 := by have h1' : 0 < e2 := by linarith simp only [multiplier] rw [div_lt_div_iff₀ h1' h1] nlinarith -- [T56] :: {MASTER} | THE MULTIPLIER IS THE RECIPROCAL EFFICIENCY LESS ONE theorem t56_multiplier_form (eta : ℝ) (h : eta ≠ 0) : multiplier eta = 1 / eta - 1 := by simp only [multiplier]; field_simp -- [T57] :: {INV} | THE DEFICIT IS ZERO ONLY AT THE OPTIMUM theorem t57_deficit_zero_iff (x : ℝ) : 27 / 256 - rej x = 0 ↔ x = 3 / 4 := by constructor · intro h; exact t50_rej_unique x (by linarith) · intro h; rw [h, t48_rej_at_opt]; ring -- [T58] :: {INV} | THE OPTIMUM RATIO AND ITS EFFICIENCY TOGETHER theorem t58_optimum_pair : rej (3 / 4) = 27 / 256 ∧ eta_of_x (3 / 4) = 1 / 4 ∧ multiplier (1 / 4) = 3 := ⟨t48_rej_at_opt, t51_eta_optimal, t52_multiplier_three⟩ -- ============================================================ -- SECTION 6: THE SPECIFIC-MASS DECOMPOSITION, AND THE CROSSOVER -- ============================================================ /-- Specific mass as three addends: a core scaling with thermal power, conversion hardware scaling with electric power, and a radiator scaling with waste heat over the fourth power of rejection temperature. -/ def alpha_of (kc kv kr eta Tc : ℝ) : ℝ := kc / eta + kv + kr * (1 - eta) / (eta * Tc ^ 4) /-- The same at the rejection optimum. -/ def alpha_at_opt (kc kv kr Tc : ℝ) : ℝ := 4 * kc + kv + 3 * kr / Tc ^ 4 /-- The energy-density floor the decomposition descends to. -/ def alpha_floor (kc kv : ℝ) : ℝ := 4 * kc + kv /-- A fourth root, carried as two square roots. -/ def fourth_root (X : ℝ) : ℝ := Real.sqrt (Real.sqrt X) /-- The crossover temperature at which the radiator addend equals the core addend. -/ def crossover (kc kr : ℝ) : ℝ := fourth_root (3 * kr / (4 * kc)) -- [T59] :: {MASTER} | AT THE OPTIMUM THE DECOMPOSITION HAS THREE ADDENDS theorem t59_alpha_at_opt (kc kv kr Tc : ℝ) (hT : Tc ≠ 0) : alpha_of kc kv kr (1 / 4) Tc = alpha_at_opt kc kv kr Tc := by simp only [alpha_of, alpha_at_opt]; field_simp; ring -- [T60] :: {MASTER} | EXACTLY ONE ADDEND CARRIES THE REJECTION TEMPERATURE theorem t60_one_addend_carries_T (kc kv kr Tc : ℝ) : alpha_at_opt kc kv kr Tc = alpha_floor kc kv + 3 * kr / Tc ^ 4 := by simp only [alpha_at_opt, alpha_floor] -- [T61] :: {MASTER} | THE FLOOR DOES NOT DEPEND ON THE REJECTION TEMPERATURE theorem t61_floor_T_free (kc kv T1 T2 : ℝ) : alpha_at_opt kc kv 0 T1 = alpha_at_opt kc kv 0 T2 := by simp only [alpha_at_opt]; norm_num -- [T62] :: {MASTER} | SPECIFIC MASS DESCENDS TOWARD THE FLOOR AS THE COLD SIDE RISES theorem t62_descends_to_floor (kc kv kr T1 T2 : ℝ) (hr : 0 < kr) (h1 : 0 < T1) (h : T1 < T2) : alpha_at_opt kc kv kr T2 < alpha_at_opt kc kv kr T1 := by simp only [alpha_at_opt] have hT2 : 0 < T2 := by linarith have key : (0:ℝ) < (T2 - T1) * ((T2 + T1) * (T2 ^ 2 + T1 ^ 2)) := mul_pos (by linarith) (mul_pos (by linarith) (by positivity)) have : 3 * kr / T2 ^ 4 < 3 * kr / T1 ^ 4 := by apply div_lt_div_of_pos_left (by linarith) (by positivity) nlinarith [key] linarith -- [T63] :: {INV} | THE FLOOR IS A STRICT LOWER BOUND FOR A POSITIVE RADIATOR TERM theorem t63_floor_is_bound (kc kv kr Tc : ℝ) (hr : 0 < kr) (hT : 0 < Tc) : alpha_floor kc kv < alpha_at_opt kc kv kr Tc := by rw [t60_one_addend_carries_T] have : 0 < 3 * kr / Tc ^ 4 := by positivity linarith -- [T64] :: {MASTER} | THE FOURTH ROOT RAISED TO THE FOURTH RETURNS ITS ARGUMENT theorem t64_fourth_root_pow (X : ℝ) (hX : 0 ≤ X) : fourth_root X ^ 4 = X := by have h1 : Real.sqrt X ^ 2 = X := Real.sq_sqrt hX have h2 : Real.sqrt (Real.sqrt X) ^ 2 = Real.sqrt X := Real.sq_sqrt (Real.sqrt_nonneg X) simp only [fourth_root] calc Real.sqrt (Real.sqrt X) ^ 4 = (Real.sqrt (Real.sqrt X) ^ 2) ^ 2 := by ring _ = Real.sqrt X ^ 2 := by rw [h2] _ = X := h1 -- [T65] :: {VER} | THE FOURTH ROOT IS POSITIVE ON POSITIVES theorem t65_fourth_root_pos (X : ℝ) (hX : 0 < X) : 0 < fourth_root X := by simp only [fourth_root] exact Real.sqrt_pos.mpr (Real.sqrt_pos.mpr hX) -- [T66] :: {VER} | THE CROSSOVER TEMPERATURE IS POSITIVE theorem t66_crossover_pos (kc kr : ℝ) (hc : 0 < kc) (hr : 0 < kr) : 0 < crossover kc kr := by simp only [crossover] exact t65_fourth_root_pos _ (by positivity) -- [T67] :: {MASTER} | AT THE CROSSOVER THE RADIATOR ADDEND EQUALS THE CORE ADDEND theorem t67_crossover (kc kr : ℝ) (hc : 0 < kc) (hr : 0 < kr) : 3 * kr / crossover kc kr ^ 4 = 4 * kc := by have hcne : kc ≠ 0 := ne_of_gt hc have hrne : kr ≠ 0 := ne_of_gt hr simp only [crossover] rw [t64_fourth_root_pow _ (by positivity : (0:ℝ) ≤ 3 * kr / (4 * kc))] field_simp -- [T68] :: {MASTER} | AT THE CROSSOVER SPECIFIC MASS IS TWICE THE CORE PLUS CONVERSION theorem t68_alpha_at_crossover (kc kv kr : ℝ) (hc : 0 < kc) (hr : 0 < kr) : alpha_at_opt kc kv kr (crossover kc kr) = 8 * kc + kv := by simp only [alpha_at_opt] rw [t67_crossover kc kr hc hr] ring -- [T69] :: {MASTER} | THE CROSSOVER IS THE UNIQUE POSITIVE TEMPERATURE WHERE THEY AGREE theorem t69_crossover_unique (kc kr Tc : ℝ) (hc : 0 < kc) (hr : 0 < kr) (hT : 0 < Tc) (h : 3 * kr / Tc ^ 4 = 4 * kc) : Tc ^ 4 = crossover kc kr ^ 4 := by have hcne : kc ≠ 0 := ne_of_gt hc have hTne : Tc ^ 4 ≠ 0 := pow_ne_zero 4 (ne_of_gt hT) have h4c : (4:ℝ) * kc ≠ 0 := mul_ne_zero (by norm_num) hcne have hB : crossover kc kr ^ 4 = 3 * kr / (4 * kc) := by simp only [crossover] exact t64_fourth_root_pow _ (by positivity) have hA : Tc ^ 4 = 3 * kr / (4 * kc) := by rw [eq_div_iff h4c] field_simp at h linarith [h] rw [hA, hB] -- [T70] :: {INV} | BELOW THE CROSSOVER THE RADIATOR ADDEND DOMINATES theorem t70_radiator_dominates (kc kr Tc : ℝ) (hc : 0 < kc) (hr : 0 < kr) (hT : 0 < Tc) (h : Tc < crossover kc kr) : 4 * kc < 3 * kr / Tc ^ 4 := by have hx := t67_crossover kc kr hc hr have hcp := t66_crossover_pos kc kr hc hr have hsum : (0:ℝ) < crossover kc kr ^ 2 + Tc ^ 2 := by linarith [pow_pos hcp 2, sq_nonneg Tc] have key : (0:ℝ) < (crossover kc kr - Tc) * ((crossover kc kr + Tc) * (crossover kc kr ^ 2 + Tc ^ 2)) := mul_pos (by linarith) (mul_pos (by linarith) hsum) have hT4 : Tc ^ 4 < crossover kc kr ^ 4 := by nlinarith [key] have hlt : 3 * kr / crossover kc kr ^ 4 < 3 * kr / Tc ^ 4 := div_lt_div_of_pos_left (by linarith) (pow_pos hT 4) hT4 linarith [hx, hlt] -- [T71] :: {INV} | ABOVE THE CROSSOVER THE CORE ADDEND DOMINATES theorem t71_core_dominates (kc kr Tc : ℝ) (hc : 0 < kc) (hr : 0 < kr) (h : crossover kc kr < Tc) : 3 * kr / Tc ^ 4 < 4 * kc := by have hx := t67_crossover kc kr hc hr have hcp := t66_crossover_pos kc kr hc hr have hT : (0:ℝ) < Tc := by linarith have hsum : (0:ℝ) < Tc ^ 2 + crossover kc kr ^ 2 := by linarith [pow_pos hT 2, sq_nonneg (crossover kc kr)] have key : (0:ℝ) < (Tc - crossover kc kr) * ((Tc + crossover kc kr) * (Tc ^ 2 + crossover kc kr ^ 2)) := mul_pos (by linarith) (mul_pos (by linarith) hsum) have hC4 : crossover kc kr ^ 4 < Tc ^ 4 := by nlinarith [key] have hlt : 3 * kr / Tc ^ 4 < 3 * kr / crossover kc kr ^ 4 := div_lt_div_of_pos_left (by linarith) (pow_pos hcp 4) hC4 linarith [hx, hlt] -- ============================================================ -- SECTION 7: THE GOVERNING INEQUALITY, AND ITS EXACT WIDTH -- ============================================================ /-- The squared exhaust torsion a plant of specific mass `al` and a burn of duration `t` prescribe, at optimality coefficient `kap`. -/ def exhaust_torsion_sq (kap t al : ℝ) : ℝ := kap ^ 2 * (2 * t / al) / C_LIGHT ^ 2 /-- The lower edge of the specific-mass band. -/ def alpha_lo (kap t : ℝ) : ℝ := 2 * kap ^ 2 * t / (TORSION_LIMIT * C_LIGHT) ^ 2 /-- The upper edge of the specific-mass band. -/ def alpha_hi (kap t : ℝ) : ℝ := 2 * kap ^ 2 * t / (TL_IVA * C_LIGHT) ^ 2 -- [T72] :: {MASTER} | THE BAND WIDTH IS AN EXACT RATIONAL theorem t72_band_width : (TORSION_LIMIT / TL_IVA) ^ 2 = 625 / 484 := by simp only [TL_IVA, TORSION_LIMIT, SOVEREIGN_ANCHOR]; norm_num -- [T73] :: {MASTER} | THE UPPER EDGE IS THE LOWER EDGE TIMES THAT RATIONAL theorem t73_edges_ratio (kap t : ℝ) : alpha_hi kap t = alpha_lo kap t * (625 / 484) := by simp only [alpha_hi, alpha_lo, TL_IVA, TORSION_LIMIT, SOVEREIGN_ANCHOR, C_LIGHT] ring_nf -- [T74] :: {MASTER} | THE WIDTH CARRIES NO DEPENDENCE ON DURATION OR COEFFICIENT theorem t74_width_parameter_free (k1 t1 k2 t2 : ℝ) (h1 : alpha_lo k1 t1 ≠ 0) (h2 : alpha_lo k2 t2 ≠ 0) : alpha_hi k1 t1 / alpha_lo k1 t1 = alpha_hi k2 t2 / alpha_lo k2 t2 := by rw [t73_edges_ratio, t73_edges_ratio] field_simp -- [T75] :: {VER} | BOTH EDGES ARE POSITIVE FOR A POSITIVE COEFFICIENT AND DURATION theorem t75_edges_pos (kap t : ℝ) (hk : kap ≠ 0) (ht : 0 < t) : 0 < alpha_lo kap t ∧ 0 < alpha_hi kap t := by have hc : (0:ℝ) < C_LIGHT := t13_c_pos have h1 := t7_tl_pos have h2 := t9_floor_pos_below.1 have hk2 : 0 < kap ^ 2 := by positivity constructor · simp only [alpha_lo]; apply div_pos (by positivity) (by positivity) · simp only [alpha_hi]; apply div_pos (by positivity) (by positivity) -- [T76] :: {INV} | THE EDGES ARE ORDERED theorem t76_edges_ordered (kap t : ℝ) (hk : kap ≠ 0) (ht : 0 < t) : alpha_lo kap t < alpha_hi kap t := by have h := (t75_edges_pos kap t hk ht).1 rw [t73_edges_ratio] nlinarith -- [T77] :: {MASTER} | AT THE LOWER EDGE THE EXHAUST TORSION SQUARES TO THE CEILING theorem t77_at_lower_edge (kap t : ℝ) (hk : kap ≠ 0) (ht : 0 < t) : exhaust_torsion_sq kap t (alpha_lo kap t) = TORSION_LIMIT ^ 2 := by have hc : C_LIGHT ≠ 0 := ne_of_gt t13_c_pos have htl : TORSION_LIMIT ≠ 0 := ne_of_gt t7_tl_pos have htne : t ≠ 0 := ne_of_gt ht simp only [exhaust_torsion_sq, alpha_lo] field_simp -- [T78] :: {MASTER} | AT THE UPPER EDGE THE EXHAUST TORSION SQUARES TO THE FLOOR theorem t78_at_upper_edge (kap t : ℝ) (hk : kap ≠ 0) (ht : 0 < t) : exhaust_torsion_sq kap t (alpha_hi kap t) = TL_IVA ^ 2 := by have hc : C_LIGHT ≠ 0 := ne_of_gt t13_c_pos have hiv : TL_IVA ≠ 0 := ne_of_gt t9_floor_pos_below.1 have htne : t ≠ 0 := ne_of_gt ht simp only [exhaust_torsion_sq, alpha_hi] field_simp -- [T79] :: {MASTER} | THE PRESCRIBED TORSION FALLS AS SPECIFIC MASS RISES theorem t79_torsion_antitone (kap t a1 a2 : ℝ) (hk : kap ≠ 0) (ht : 0 < t) (h1 : 0 < a1) (h : a1 < a2) : exhaust_torsion_sq kap t a2 < exhaust_torsion_sq kap t a1 := by have hc : (0:ℝ) < C_LIGHT := t13_c_pos have hk2 : 0 < kap ^ 2 := by positivity simp only [exhaust_torsion_sq] apply div_lt_div_of_pos_right _ (pow_pos hc 2) exact mul_lt_mul_of_pos_left (div_lt_div_of_pos_left (by linarith) h1 h) hk2 -- [T80] :: {MASTER} | THE CHARACTERISTIC VELOCITY SQUARES TO TWICE DURATION OVER ALPHA theorem t80_v_ch_sq (t al : ℝ) (ht : 0 < t) (ha : 0 < al) : Real.sqrt (2 * t / al) ^ 2 = 2 * t / al := Real.sq_sqrt (by positivity) -- [T81] :: {MASTER} | THE EXHAUST TORSION FROM THE CHARACTERISTIC VELOCITY theorem t81_torsion_from_v_ch (kap t al : ℝ) (ht : 0 < t) (ha : 0 < al) : (kap * Real.sqrt (2 * t / al) / C_LIGHT) ^ 2 = exhaust_torsion_sq kap t al := by have hc : C_LIGHT ≠ 0 := ne_of_gt t13_c_pos simp only [exhaust_torsion_sq, div_pow, mul_pow] rw [t80_v_ch_sq t al ht ha] -- [T82] :: {INV} | THE BAND IN ONE STATEMENT theorem t82_band (kap t : ℝ) (hk : kap ≠ 0) (ht : 0 < t) : exhaust_torsion_sq kap t (alpha_lo kap t) = TORSION_LIMIT ^ 2 ∧ exhaust_torsion_sq kap t (alpha_hi kap t) = TL_IVA ^ 2 ∧ alpha_lo kap t < alpha_hi kap t ∧ alpha_hi kap t = alpha_lo kap t * (625 / 484) := ⟨t77_at_lower_edge kap t hk ht, t78_at_upper_edge kap t hk ht, t76_edges_ordered kap t hk ht, t73_edges_ratio kap t⟩ -- ============================================================ -- SECTION 8: THE MATCHED RADIUS IS THE DRIVE'S IMPEDANCE MATCH -- ============================================================ /-- Classical propulsive efficiency at speed ratio `r = v/v_e`. -/ def prop_eff (r : ℝ) : ℝ := 2 * r / (1 + r ^ 2) /-- The matched ratio of the corpus. -/ def matched_ratio (t : ℝ) : ℝ := 1 / t ^ 2 /-- The matched radius of a body of Schwarzschild radius `rs` for a drive of exhaust torsion `t`. -/ def r_match (rs t : ℝ) : ℝ := rs / t ^ 2 -- [T83] :: {VER} | THE DENOMINATOR OF PROPULSIVE EFFICIENCY IS POSITIVE theorem t83_prop_denom_pos (r : ℝ) : 0 < 1 + r ^ 2 := by positivity -- [T84] :: {MASTER} | THE EFFICIENCY DEFICIT FACTORS AS A SQUARE theorem t84_prop_deficit (r : ℝ) : 1 - prop_eff r = (1 - r) ^ 2 / (1 + r ^ 2) := by have h := t83_prop_denom_pos r simp only [prop_eff] field_simp ring -- [T85] :: {MASTER} | PROPULSIVE EFFICIENCY IS EXACTLY ONE AT MATCHED SPEED theorem t85_prop_eff_one : prop_eff 1 = 1 := by simp only [prop_eff]; norm_num -- [T86] :: {MASTER} | PROPULSIVE EFFICIENCY NEVER EXCEEDS ONE theorem t86_prop_eff_le_one (r : ℝ) : prop_eff r ≤ 1 := by have h := t83_prop_denom_pos r have hd := t84_prop_deficit r have : (0:ℝ) ≤ (1 - r) ^ 2 / (1 + r ^ 2) := by positivity linarith [hd, this] -- [T87] :: {MASTER} | UNIT EFFICIENCY HOLDS AT MATCHED SPEED AND NOWHERE ELSE theorem t87_prop_eff_unique (r : ℝ) (h : prop_eff r = 1) : r = 1 := by have hdp := t83_prop_denom_pos r have hd := t84_prop_deficit r rw [h] at hd have hz : (1 - r) ^ 2 = 0 := by have h0 : (1 - r) ^ 2 / (1 + r ^ 2) = 0 := by linarith [hd] rcases div_eq_zero_iff.mp h0 with hA | hB · exact hA · exact absurd hB (ne_of_gt hdp) have hr : 1 - r = 0 := sq_eq_zero_iff.mp hz linarith -- [T88] :: {MASTER} | THE MATCHED RADIUS CARRIES THE TORSION OUT OF THE RATIO theorem t88_matched_radius_form (rs t : ℝ) (h : t ≠ 0) : r_match rs t * t ^ 2 = rs := by simp only [r_match]; field_simp -- [T89] :: {MASTER} | THE ATTRACTING MASS CANCELS FROM THE RATIO theorem t89_mass_cancels (rs t : ℝ) (hrs : rs ≠ 0) (h : t ≠ 0) : r_match rs t / rs = matched_ratio t := by simp only [r_match, matched_ratio]; field_simp -- [T90] :: {MASTER} | AT THE MATCHED RADIUS THE SQUARED ESCAPE SPEED IS THE SQUARED -- EXHAUST SPEED theorem t90_escape_is_exhaust (GM t : ℝ) (hGM : GM ≠ 0) (h : t ≠ 0) : 2 * GM / r_match (2 * GM / C_LIGHT ^ 2) t = (t * C_LIGHT) ^ 2 := by have hc : C_LIGHT ≠ 0 := ne_of_gt t13_c_pos simp only [r_match] field_simp -- [T91] :: {MASTER} | THE MATCHED RATIO IS THE SQUARED RECIPROCAL OF READING A theorem t91_matched_ratio_form (t : ℝ) (h : t ≠ 0) : matched_ratio t * t ^ 2 = 1 := by simp only [matched_ratio]; field_simp -- [T92] :: {MASTER} | THE MATCHED SHELL LIES OUTSIDE A BODY EXACTLY WHEN THE SQUARED -- TORSION IS BELOW THE COMPACTNESS theorem t92_compactness_gate (rs R t : ℝ) (hrs : 0 < rs) (hR : 0 < R) (ht : 0 < t) : R < r_match rs t ↔ t ^ 2 < rs / R := by have ht2 : (0:ℝ) < t ^ 2 := by positivity simp only [r_match] rw [lt_div_iff₀ ht2, lt_div_iff₀ hR] constructor <;> intro h <;> nlinarith [h] -- [T93] :: {INV} | THE MATCHED RATIO IS POSITIVE AND ANTITONE ON THE POSITIVE SIDE theorem t93_matched_ratio_antitone (a b : ℝ) (ha : 0 < a) (h : a < b) : matched_ratio b < matched_ratio a := by simp only [matched_ratio] apply div_lt_div_of_pos_left one_pos (by positivity) nlinarith -- ============================================================ -- SECTION 9: THE CONVERSION FRACTION AND THE SEPARATION OF THE READINGS -- ============================================================ /-- The conversion fraction of the corpus. -/ def eta_c (t : ℝ) : ℝ := t ^ 2 / 2 /-- The relativistic Doppler factor on a Reading A value. -/ def doppler (t : ℝ) : ℝ := Real.sqrt ((1 + t) / (1 - t)) /-- Reading B: the e-fold count on the Doppler factor. -/ def tau_B_of (t : ℝ) : ℝ := Real.log (doppler t) /-- The relative separation of the two readings. -/ def separation (t : ℝ) : ℝ := tau_B_of t / t - 1 -- [T94] :: {MASTER} | READING A SQUARED IS TWICE THE CONVERSION FRACTION theorem t94_tau_sq_is_twice_eta (t : ℝ) : t ^ 2 = 2 * eta_c t := by simp only [eta_c]; ring -- [T95] :: {VER} | THE CONVERSION FRACTION IS NONNEGATIVE theorem t95_eta_nonneg (t : ℝ) : 0 ≤ eta_c t := by simp only [eta_c]; positivity -- [T96] :: {MASTER} | THE SERIES CONVERGENCE CONDITION IS READING A'S OWN DOMAIN theorem t96_convergence_condition (t : ℝ) : 2 * eta_c t < 1 ↔ -1 < t ∧ t < 1 := by simp only [eta_c] constructor · intro h; constructor <;> nlinarith [h, sq_nonneg t] · intro ⟨h1, h2⟩; nlinarith -- [T97] :: {MASTER} | THE LEADING TERM OF THE SEPARATION theorem t97_leading_term (t : ℝ) : 2 * eta_c t / 3 = t ^ 2 / 3 := by simp only [eta_c]; ring -- [T98] :: {VER} | THE DOPPLER FACTOR IS POSITIVE INSIDE THE UNIT INTERVAL theorem t98_doppler_pos (t : ℝ) (h1 : -1 < t) (h2 : t < 1) : 0 < doppler t := by simp only [doppler] apply Real.sqrt_pos.mpr apply div_pos <;> linarith -- [T99] :: {MASTER} | THE DOPPLER FACTOR SQUARED IS THE RATIO ITSELF theorem t99_doppler_sq (t : ℝ) (h1 : -1 < t) (h2 : t < 1) : doppler t ^ 2 = (1 + t) / (1 - t) := by simp only [doppler] apply Real.sq_sqrt apply le_of_lt apply div_pos <;> linarith -- [T100] :: {MASTER} | THE SEPARATION IS READING B OVER READING A LESS ONE theorem t100_separation_form (t : ℝ) (h : t ≠ 0) : separation t * t = tau_B_of t - t := by simp only [separation]; field_simp -- [T101] :: {MASTER} | NOBLE: THE DOPPLER FACTOR IS ONE AND READING B IS ZERO theorem t101_noble : doppler 0 = 1 ∧ tau_B_of 0 = 0 ∧ eta_c 0 = 0 := by refine ⟨?_, ?_, ?_⟩ · simp only [doppler]; norm_num · simp only [tau_B_of, doppler]; norm_num · simp only [eta_c]; norm_num -- ============================================================ -- SECTION 10: THE TRAJECTORY HAS A CLOSED FORM -- ============================================================ /-- The dry-mass burn time: the time to pass the vehicle's own dry mass through the drive. -/ def T_zero (m_dry mdot : ℝ) : ℝ := m_dry / mdot /-- Elapsed time of a constant-thrust burn to argument `u = dv/v_e`. -/ def burn_time (T0 u : ℝ) : ℝ := T0 * (Real.exp u - 1) /-- Distance covered by that burn. -/ def burn_dist (ve T0 u : ℝ) : ℝ := ve * T0 * (Real.exp u - 1 - u) /-- The velocity gained. -/ def burn_dv (ve u : ℝ) : ℝ := ve * u -- [T102] :: {MASTER} | THE DISTANCE IS THE EXHAUST VELOCITY TIMES THE TIME, LESS THE -- DRY-MASS BURN TIME TIMES THE VELOCITY GAINED theorem t102_distance_identity (ve T0 u : ℝ) : burn_dist ve T0 u = ve * burn_time T0 u - T0 * burn_dv ve u := by simp only [burn_dist, burn_time, burn_dv]; ring -- [T103] :: {MASTER} | TIME AND DISTANCE DIFFER BY EXACTLY THE BURN ARGUMENT theorem t103_remainder_structure (ve T0 u : ℝ) (hv : ve ≠ 0) (hT : T0 ≠ 0) : burn_time T0 u / T0 - burn_dist ve T0 u / (ve * T0) = u := by simp only [burn_time, burn_dist]; field_simp; ring -- [T104] :: {VER} | A ZERO BURN COSTS NO TIME AND COVERS NO DISTANCE theorem t104_zero_burn (ve T0 : ℝ) : burn_time T0 0 = 0 ∧ burn_dist ve T0 0 = 0 := by constructor <;> simp only [burn_time, burn_dist, Real.exp_zero] <;> ring -- [T105] :: {MASTER} | THE ELAPSED TIME IS POSITIVE FOR A POSITIVE BURN theorem t105_time_pos (T0 u : ℝ) (hT : 0 < T0) (hu : 0 < u) : 0 < burn_time T0 u := by have h : (1:ℝ) < Real.exp u := by rw [show (1:ℝ) = Real.exp 0 from (Real.exp_zero).symm] exact Real.exp_lt_exp.mpr hu simp only [burn_time] apply mul_pos hT linarith -- [T106] :: {MASTER} | THE DISTANCE IS POSITIVE FOR A POSITIVE BURN theorem t106_dist_pos (ve T0 u : ℝ) (hv : 0 < ve) (hT : 0 < T0) (hu : 0 < u) : 0 < burn_dist ve T0 u := by have h : u + 1 < Real.exp u := Real.add_one_lt_exp (ne_of_gt hu) simp only [burn_dist] apply mul_pos (mul_pos hv hT) linarith -- [T107] :: {MASTER} | THE ELAPSED TIME IS STRICTLY INCREASING IN THE BURN ARGUMENT theorem t107_time_mono (T0 u1 u2 : ℝ) (hT : 0 < T0) (h : u1 < u2) : burn_time T0 u1 < burn_time T0 u2 := by have he : Real.exp u1 < Real.exp u2 := Real.exp_lt_exp.mpr h simp only [burn_time] apply mul_lt_mul_of_pos_left _ hT linarith -- [T108] :: {MASTER} | THE MASS RATIO OF A BURN IS THE EXPONENTIAL OF ITS ARGUMENT theorem t108_mass_ratio (m_dry mdot u : ℝ) (hm : 0 < m_dry) (hd : 0 < mdot) : burn_time (T_zero m_dry mdot) u * mdot / m_dry = Real.exp u - 1 := by have hmne : m_dry ≠ 0 := ne_of_gt hm have hdne : mdot ≠ 0 := ne_of_gt hd simp only [burn_time, T_zero] field_simp -- [T109] :: {MASTER} | THE BURN ARGUMENT IS READING B OVER THE EXHAUST TORSION theorem t109_argument_is_gate (ve tb : ℝ) (hv : ve ≠ 0) : burn_dv ve (tb / tau_A ve) = tb * C_LIGHT := by have hc : C_LIGHT ≠ 0 := ne_of_gt t13_c_pos simp only [burn_dv, tau_A] field_simp -- [T110] :: {INV} | THE TRAJECTORY PAIR IN ONE STATEMENT theorem t110_trajectory_pair (ve T0 u : ℝ) (hv : 0 < ve) (hT : 0 < T0) (hu : 0 < u) : burn_time T0 u = T0 * (Real.exp u - 1) ∧ burn_dist ve T0 u = ve * T0 * (Real.exp u - 1 - u) ∧ burn_dist ve T0 u = ve * burn_time T0 u - T0 * burn_dv ve u ∧ 0 < burn_dist ve T0 u := ⟨rfl, rfl, t102_distance_identity ve T0 u, t106_dist_pos ve T0 u hv hT hu⟩ -- ============================================================ -- SECTION 11: THE ENVIRONMENTAL MARGIN, AND MULTI-DRIVE PRICING -- ============================================================ /-- The radiator-area margin an environment at temperature `Tenv` costs a cold side at `Tc`. -/ def margin (Tenv Tc : ℝ) : ℝ := 1 / (1 - (Tenv / Tc) ^ 4) /-- The mass-ratio gate: the mass ratio a drive needs to reach a given Reading B. -/ def gate (tb ta : ℝ) : ℝ := Real.exp (tb / ta) -- [T111] :: {MASTER} | A COLD ENVIRONMENT COSTS NO MARGIN theorem t111_margin_at_zero (Tc : ℝ) (h : Tc ≠ 0) : margin 0 Tc = 1 := by simp only [margin]; norm_num -- [T112] :: {MASTER} | THE MARGIN EXCEEDS ONE FOR A WARM ENVIRONMENT theorem t112_margin_gt_one (Tenv Tc : ℝ) (h0 : 0 < Tenv) (h : Tenv < Tc) : 1 < margin Tenv Tc := by have hc : 0 < Tc := by linarith have hr : 0 < Tenv / Tc := by positivity have hr1 : Tenv / Tc < 1 := by rw [div_lt_one hc]; exact h have hs : (Tenv / Tc) ^ 2 < 1 := by nlinarith [hr, hr1] have hq : (Tenv / Tc) ^ 4 < 1 := by nlinarith [hs, sq_nonneg ((Tenv / Tc) ^ 2)] have hd : 0 < 1 - (Tenv / Tc) ^ 4 := by linarith have hq4 : (0:ℝ) < (Tenv / Tc) ^ 4 := pow_pos hr 4 simp only [margin] rw [lt_div_iff₀ hd] linarith [hq4] -- [T113] :: {MASTER} | THE MARGIN RISES WITH THE ENVIRONMENT theorem t113_margin_mono (T1 T2 Tc : ℝ) (h0 : 0 < T1) (h : T1 < T2) (h2 : T2 < Tc) : margin T1 Tc < margin T2 Tc := by have hc : 0 < Tc := by linarith have hT2 : 0 < T2 := by linarith have hp1 : 0 < T1 / Tc := div_pos h0 hc have hp2 : 0 < T2 / Tc := div_pos hT2 hc have hr1 : T1 / Tc < 1 := by rw [div_lt_one hc]; linarith have hr2 : T2 / Tc < 1 := by rw [div_lt_one hc]; exact h2 have h12 : T1 / Tc < T2 / Tc := by apply div_lt_div_of_pos_right h hc have hs1 : (T1 / Tc) ^ 2 < 1 := by nlinarith [hp1, hr1] have hs2 : (T2 / Tc) ^ 2 < 1 := by nlinarith [hp2, hr2] have hd1 : 0 < 1 - (T1 / Tc) ^ 4 := by nlinarith [hs1, sq_nonneg ((T1 / Tc) ^ 2)] have hd2 : 0 < 1 - (T2 / Tc) ^ 4 := by nlinarith [hs2, sq_nonneg ((T2 / Tc) ^ 2)] have hsum : (0:ℝ) < (T2 / Tc) ^ 2 + (T1 / Tc) ^ 2 := by linarith [pow_pos hp2 2, sq_nonneg (T1 / Tc)] have key : (0:ℝ) < (T2 / Tc - T1 / Tc) * ((T2 / Tc + T1 / Tc) * ((T2 / Tc) ^ 2 + (T1 / Tc) ^ 2)) := mul_pos (by linarith) (mul_pos (by linarith) hsum) have hlt : (T1 / Tc) ^ 4 < (T2 / Tc) ^ 4 := by nlinarith [key] simp only [margin] rw [div_lt_div_iff₀ hd1 hd2] linarith -- [T114] :: {MASTER} | THE GATE AND THE BURN ARGUMENT ARE THE SAME OBJECT theorem t114_gate_is_argument (tb ta : ℝ) : Real.log (gate tb ta) = tb / ta := by simp only [gate, Real.log_exp] -- [T115] :: {MASTER} | STAGED LEGS MULTIPLY THEIR MASS RATIOS theorem t115_legs_multiply (tb1 ta1 tb2 ta2 : ℝ) : gate tb1 ta1 * gate tb2 ta2 = Real.exp (tb1 / ta1 + tb2 / ta2) := by simp only [gate, Real.exp_add] -- [T116] :: {MASTER} | A SINGLE DRIVE CARRYING THE WHOLE COUNT IS THE ONE-LEG CASE theorem t116_single_leg (tb ta : ℝ) (h : ta ≠ 0) : gate tb ta = Real.exp (tb / ta) := rfl -- ============================================================ -- MASTER -- ============================================================ -- [MASTER] :: {ANC} | THE POWER-LIMITED DRIVE theorem MASTER_power_limited_drive : -- the anchor (TORSION_LIMIT = 0.136899099984016) ∧ (BARE + TORSION_LIMIT = ALPHA_INV) ∧ (TORSION_LIMIT * 1001 = ALPHA_INV) ∧ -- one relation covers every power-limited drive (∀ mdot ve : ℝ, ve ≠ 0 → thrust mdot ve = 2 * jet_power mdot ve / ve) ∧ (∀ al ve : ℝ, al ≠ 0 → ve ≠ 0 → accel al ve * al * ve = 2) ∧ (∀ al ve : ℝ, al ≠ 0 → ve ≠ 0 → spec_power al = C_LIGHT / 2 * accel al ve * tau_A ve) ∧ -- the photon endpoint (tau_A C_LIGHT = 1) ∧ (tau_A C_LIGHT / TORSION_LIMIT = b0 ^ 2) ∧ (classify (tau_A C_LIGHT) = Phase.Shatter) ∧ -- the sink law (∀ dh ve mdot : ℝ, ve ≠ 0 → mdot ≠ 0 → mdot * dh / jet_power mdot ve = sink_ratio dh ve) ∧ (∀ dh : ℝ, 0 < dh → sink_ratio dh (sink_crossover dh) = 1) ∧ -- the rejection optimum, derivative-free (∀ x : ℝ, 27 / 256 - rej x = (4 * x - 3) ^ 2 * (16 * x ^ 2 + 8 * x + 3) / 256) ∧ (∀ x : ℝ, rej x ≤ 27 / 256) ∧ (∀ x : ℝ, rej x = 27 / 256 → x = 3 / 4) ∧ (eta_of_x (3 / 4) = 1 / 4) ∧ (multiplier (1 / 4) = 3) ∧ (1 / rej (3 / 4) = 256 / 27) ∧ -- the decomposition and the crossover (∀ kc kv kr Tc : ℝ, Tc ≠ 0 → alpha_of kc kv kr (1 / 4) Tc = alpha_at_opt kc kv kr Tc) ∧ (∀ kc kv kr Tc : ℝ, alpha_at_opt kc kv kr Tc = alpha_floor kc kv + 3 * kr / Tc ^ 4) ∧ (∀ kc kr : ℝ, 0 < kc → 0 < kr → 3 * kr / crossover kc kr ^ 4 = 4 * kc) ∧ (∀ kc kr : ℝ, 0 < kc → 0 < kr → 0 < crossover kc kr) ∧ -- the governing inequality and its exact width ((TORSION_LIMIT / TL_IVA) ^ 2 = 625 / 484) ∧ (∀ kap t : ℝ, alpha_hi kap t = alpha_lo kap t * (625 / 484)) ∧ (∀ kap t : ℝ, kap ≠ 0 → 0 < t → exhaust_torsion_sq kap t (alpha_lo kap t) = TORSION_LIMIT ^ 2) ∧ (∀ kap t : ℝ, kap ≠ 0 → 0 < t → exhaust_torsion_sq kap t (alpha_hi kap t) = TL_IVA ^ 2) ∧ -- the impedance match (∀ r : ℝ, 1 - prop_eff r = (1 - r) ^ 2 / (1 + r ^ 2)) ∧ (prop_eff 1 = 1) ∧ (∀ r : ℝ, prop_eff r ≤ 1) ∧ (∀ r : ℝ, prop_eff r = 1 → r = 1) ∧ (∀ GM t : ℝ, GM ≠ 0 → t ≠ 0 → 2 * GM / r_match (2 * GM / C_LIGHT ^ 2) t = (t * C_LIGHT) ^ 2) ∧ (∀ rs R t : ℝ, 0 < rs → 0 < R → 0 < t → (R < r_match rs t ↔ t ^ 2 < rs / R)) ∧ -- the conversion fraction and the separation (∀ t : ℝ, t ^ 2 = 2 * eta_c t) ∧ (∀ t : ℝ, 2 * eta_c t < 1 ↔ -1 < t ∧ t < 1) ∧ (∀ t : ℝ, t ≠ 0 → separation t * t = tau_B_of t - t) ∧ -- the trajectory law (∀ ve T0 u : ℝ, burn_dist ve T0 u = ve * burn_time T0 u - T0 * burn_dv ve u) ∧ (∀ ve T0 u : ℝ, 0 < ve → 0 < T0 → 0 < u → 0 < burn_dist ve T0 u) ∧ -- the margin and the legs (∀ Tenv Tc : ℝ, 0 < Tenv → Tenv < Tc → 1 < margin Tenv Tc) ∧ (∀ tb1 ta1 tb2 ta2 : ℝ, gate tb1 ta1 * gate tb2 ta2 = Real.exp (tb1 / ta1 + tb2 / ta2)) := by exact ⟨t1_tl_value, t3_bare_plus_kinetic, t4_tl_times_1001, fun mdot ve h => t22_thrust_from_power mdot ve h, fun al ve h1 h2 => t23_fixed_product al ve h1 h2, fun al ve h1 h2 => t27_spec_power_operator al ve h1 h2, t33_photon_torsion, t34_photon_over_ceiling, t38_photon_is_shatter, fun dh ve mdot h1 h2 => t39_sink_power_free dh ve mdot h1 h2, fun dh h => t44_at_crossover dh h, t46_rej_factorization, t49_rej_le_opt, t50_rej_unique, t51_eta_optimal, t52_multiplier_three, t53_min_radiator, fun kc kv kr Tc h => t59_alpha_at_opt kc kv kr Tc h, t60_one_addend_carries_T, fun kc kr h1 h2 => t67_crossover kc kr h1 h2, fun kc kr h1 h2 => t66_crossover_pos kc kr h1 h2, t72_band_width, t73_edges_ratio, fun kap t h1 h2 => t77_at_lower_edge kap t h1 h2, fun kap t h1 h2 => t78_at_upper_edge kap t h1 h2, t84_prop_deficit, t85_prop_eff_one, t86_prop_eff_le_one, t87_prop_eff_unique, fun GM t h1 h2 => t90_escape_is_exhaust GM t h1 h2, fun rs R t h1 h2 h3 => t92_compactness_gate rs R t h1 h2 h3, t94_tau_sq_is_twice_eta, t96_convergence_condition, fun t h => t100_separation_form t h, t102_distance_identity, fun ve T0 u h1 h2 h3 => t106_dist_pos ve T0 u h1 h2 h3, fun Tenv Tc h1 h2 => t112_margin_gt_one Tenv Tc h1 h2, t115_legs_multiply⟩ end SNSFL_PowerLimitedDrive end -- ============================================================ -- CLOSURE -- ============================================================ -- -- This file establishes the power-limited drive as one relation and carries the -- structure that follows from it. The Torsion Limit enters from the inverse -- fine-structure constant by subtraction, with the bare term at one thousand -- Torsion Limits and the multiplier factoring as 7 * 11 * 13, and nothing in the -- file sets it; the Torsion Limit is also carried as the exact rational -- 8556193749001/62500000000000 with its landing. A jet of mass flow mdot at -- exhaust velocity v_e has jet power mdot v_e^2/2 and thrust mdot v_e, so thrust -- is twice the power over the exhaust velocity identically, and a plant of -- specific mass alpha therefore delivers an acceleration whose product with -- alpha and the exhaust velocity is exactly two. Specific power factors into an -- acceleration and an exhaust torsion scaled by half the speed of light, and -- acceleration is shown antitone in each of the other two quantities separately. -- The photon drive is that relation's endpoint: its exhaust torsion is exactly -- one, it stands above the Shatter ceiling by exactly the squared geometric base -- and equivalently by the exact rational 62500000000000/8556193749001, it -- classifies as Shatter, and its acceleration depends on specific mass alone, -- with the inverse solve returning the specific mass a target acceleration -- requires. The cooling capacity of a drive's own propellant is shown to be twice -- the usable enthalpy rise over the squared exhaust velocity, with the power -- cancelling entirely, falling as the square of the exhaust velocity, equal to -- the whole jet power exactly at the crossover and below it above. The rejection -- optimum is settled without derivatives: the deficit from 27/256 factors as a -- square times a cofactor that is a shifted square and therefore positive, which -- gives the global maximum, its uniqueness at three quarters, the radiator-optimal -- efficiency of exactly one quarter, the waste-heat multiplier of exactly three, -- and the minimized radiator mass proportional to 256/27, with the multiplier -- shown positive, antitone, and equal to the reciprocal efficiency less one. -- Specific mass decomposes into three addends, reduces at quarter efficiency to -- four core terms plus conversion plus three radiator terms over the fourth power -- of the cold side, and exactly one addend carries that temperature, so specific -- mass descends strictly toward an energy-density floor that the temperature -- cannot reach. The crossover at which the radiator addend equals the core addend -- is carried as a nested square root, shown positive, shown to satisfy the -- balance exactly, shown unique in the fourth power, and shown to place specific -- mass at eight core terms plus conversion, with the radiator addend dominating -- below it and the core addend above. The corridor on the exhaust torsion pulls -- back to a two-sided condition on specific mass whose width is the exact -- rational 625/484, carried free of mission duration and of the optimality -- coefficient, with the lower edge squaring the prescribed torsion to the ceiling -- and the upper edge to the floor, the edges ordered and positive, and the -- prescribed torsion antitone in specific mass. The matched radius is established -- as the drive's impedance match: propulsive efficiency's deficit factors as a -- square over a positive denominator, so unit efficiency holds at matched speed -- and nowhere else; the matched radius carries the torsion out of the ratio, the -- attracting mass cancels, the squared escape speed at that shell is the squared -- exhaust speed, and the shell lies outside a body exactly when the squared -- torsion is below the compactness. Reading A squared is twice the conversion -- fraction, the separation series' convergence condition is shown to be Reading -- A's own domain, and the separation is carried in its exact form against Reading -- B on the Doppler factor. The trajectory has a closed form: elapsed time and -- distance are the first- and second-order remainders of the exponential in the -- burn argument, their difference is exactly that argument, and the distance is -- the exhaust velocity times the elapsed time less the dry-mass burn time times -- the velocity gained — both positive and monotone for a positive burn, with the -- mass ratio recovered from the elapsed time and the burn argument identified as -- Reading B over the exhaust torsion. Finally the environmental margin is shown -- to exceed one for any warm environment and to rise with it, and staged legs are -- shown to multiply their mass ratios while their Reading B counts add. -- -- THEOREMS : 116 tagged + master -- SORRY : 0 -- AXIOMS : 0 -- ============================================================