# This is the code to run the MLX90614 Infrared Thermal Sensor
# You'll need to import the package "Adafruit Blinka"
# You'll need to import the package "adafruit-circuitpython-mlx90614/"
# You'll need to enable i2c on the pi https://pimylifeup.com/raspberry-pi-i2c/
# Reboot after enabling i2C
# Sensor is connected to 3.3V, GND and the i2C pins 3(SDA) and 5(SCL)

import board
import busio as io
import adafruit_mlx90614

from time import sleep

i2c = io.I2C(board.SCL, board.SDA, frequency=100000)
mlx = adafruit_mlx90614.MLX90614(i2c)

ambientTemp = "{:.2f}".format(mlx.ambient_temperature)
targetTemp = "{:.2f}".format(mlx.object_temperature)

sleep(1)

print("Ambient Temperature:", ambientTemp, "°C")
print("Target Temperature:", targetTemp,"°C")