---
title: Use the GetProcessParameter component
description: Get the value of a specific process parameter you had set for a bot process in RPA Hub with the GetProcessParameter component in the RPA Desktop Design Studio.
locale: en-US
canonical_url: https://www.servicenow.com/docs/r/australia/integrate-applications/use-processprm-getprsprm.html
release: australia
topic_type: task
last_updated: "2026-03-12"
reading_time_minutes: 1
breadcrumb: [Process Parameters, RPA Hub, Automation components, RPA Desktop Design Studio, Robotic Process Automation \(RPA\) Hub, Workflow Data Fabric]
---

# Use the GetProcessParameter component

Get the value of a specific process parameter you had set for a bot process in RPA Hub with the GetProcessParameter component in the RPA Desktop Design Studio.

## Before you begin

Set at least one process parameter as part of a bot process on the RPA Hub. See [Create a process parameter within a bot process in RPA Hub](https://raw.githubusercontent.com/ServiceNow/ServiceNowDocs/australia/markdown/australia/integrate-applications/create-process-parameter-botprocess.md).

Assign the automation to the bot process by using the **Assign bot process** option in the Toolbar of RPA Desktop Design Studio . You must set the same bot process and robot associated with the process parameter.

Role required: none

## About this task

You can configure the properties for the GetProcessParameter component. For more information about these properties, see [Properties of the Process Parameters components](https://raw.githubusercontent.com/ServiceNow/ServiceNowDocs/australia/markdown/australia/integrate-applications/processprm-properties.md).

## Procedure

1.  In the Toolbox pane, navigate to **RPA Hub** > **Process Parameters**.

2.  Drag the GetProcessParameter component to the Design surface.

3.  To configure the input field, see [Configure port properties](https://raw.githubusercontent.com/ServiceNow/ServiceNowDocs/australia/markdown/australia/integrate-applications/configure-input-port-properties.md).

4.  Connect the data and control ports of the GetProcessParameter component to the corresponding ports of the other components as described in the following table.

    |Port type|Purpose of connection|Mandatory?|
    |---------|---------------------|----------|
    |Data In \(Name\)|Takes the name of the process parameter you had set as part of the bot process on RPA Hub from a previously executed component.|Yes|
    |Data Out \(Value\)|Returns the value of the process parameter and passes to the next component.|Yes|
    |Control In|Connects to the Control Out port of one or more components.|Yes|
    |Control Out|Connects to the Control In port of another component or the default end component.|Yes|

5.  To test the component, under the **DESIGN** tab, click **Run**.


**Parent Topic:**[Process Parameters](https://raw.githubusercontent.com/ServiceNow/ServiceNowDocs/australia/markdown/australia/integrate-applications/process-parameters.md)