--- title: Set up an Amazon S3 integration for Health Log Analytics description: Set up an integration for streaming log data from Amazon S3 \(Simple Storage Service\) buckets to your ServiceNow instance. locale: en-US canonical_url: https://www.servicenow.com/docs/r/australia/it-operations-management/health-log-analytics/il-connector-hla-aws-s3.html release: australia product: Health Log Analytics classification: health-log-analytics topic_type: task last_updated: "2026-03-12" reading_time_minutes: 6 keywords: [ServiceNow, Health Log Analytics, HLA, Amazon S3, integration, configuration] breadcrumb: [Set up integrations from Integrations Launchpad, Set up HLA on your instance, Configuring, Health Log Analytics, ITOM AIOps, IT Operations Management] --- # Set up an Amazon S3 integration for Health Log Analytics Set up an integration for streaming log data from Amazon S3 \(Simple Storage Service\) buckets to your ServiceNow instance. ## Before you begin - Verify that a MID Server is installed and configured with the Log Ingestion capability enabled. For more information, see [MID Server system requirements](https://raw.githubusercontent.com/ServiceNow/ServiceNowDocs/australia/markdown/servicenow-platform/r_MIDServerSystemRequirements.md). **Important:** Health Log Analytics does not support IPv6. To work with the application, configure the MID Server to IPv4. - Unless the MID Server and external clients are on the same network, the MID Server must have a public IP address. This is required when its IP is exposed through network address translation \(NAT\), a load balancer, or a similar device. The public IP address enables external clients, such as Filebeat agents located outside its network, to reach the MID Server. Private IP addresses aren't routable over the internet. Without a public IP, external clients can't connect to the MID Server even if they are configured with its address. In the MID Server properties, add a property named **mid.public\_ip** with the public IP address as the value. For more information, see [Create a MID Server property](https://raw.githubusercontent.com/ServiceNow/ServiceNowDocs/australia/markdown/servicenow-platform/r_MIDServerProperties.md). If the MID Server and external clients are on the same network, connections can be made using the private IP address. Role required: evt\_mgmt\_admin ## About this task Set up an integration from the Integrations Launchpad in Service Operations Workspace, which you access from the ITOM AIOps configuration center. The AIOps configuration center is a centralized workspace for configuring and managing AIOps features from a single place. The integrations setup process reduces implementation time compared to manual data input setup in the classic interface in Health Log Analytics. For more information, see [Integrations Launchpad in Service Operations Workspace for ITOM](https://raw.githubusercontent.com/ServiceNow/ServiceNowDocs/australia/markdown/australia/it-operations-management/integrations-launchpad.md). ## Procedure 1. Navigate to **Workspaces** > **Service Operations Workspace**. 2. From the navigation pane, select the AIOps configuration center icon \[Omitted image "icon-itom-aiops-config.png"\] Alt text: ITOM AIOps configuration center icon. The ITOM AIOps configuration center page appears. The configuration center is a centralized workspace. Use it to configure and manage AIOps features from a single place. 3. From the Integrate section, under Integrations, select **Add integration**. The Integrations Launchpad appears. 4. In the **Browse integrations** tab, search for `S3`. 5. Select the Amazon S3 integration tile. **Note:** If you start an integration setup before meeting all prerequisites, a message appears. You can cancel the setup and complete the prior requirements first. Alternatively, you can continue in draft mode and complete the requirements later. Note that you can't activate the integration until you have completed all the prerequisites. 6. On the **Provide details** form, fill in the fields. For a description of the fields, see the **Provide details** table in [Amazon S3 integration configuration fields](https://raw.githubusercontent.com/ServiceNow/ServiceNowDocs/australia/markdown/australia/it-operations-management/health-log-analytics/il-connector-hla-aws-s3-fields.md). 7. Select **Next** to save your settings and proceed to the next configuration form. 8. On the **Set data retrieval method** form, fill in the fields. For a description of the fields, see the **Set data retrieval method** table in [Amazon S3 integration configuration fields](https://raw.githubusercontent.com/ServiceNow/ServiceNowDocs/australia/markdown/australia/it-operations-management/health-log-analytics/il-connector-hla-aws-s3-fields.md). 9. Select **Advanced settings** and fill in the advanced configuration fields. For a description of the fields, see the **Advanced settings** table in [Amazon S3 integration configuration fields](https://raw.githubusercontent.com/ServiceNow/ServiceNowDocs/australia/markdown/australia/it-operations-management/health-log-analytics/il-connector-hla-aws-s3-fields.md). 10. Do one of the following. - If you completed all the prerequisites before starting the configuration, activate the integration either with or without AI-powered capabilities. Select the appropriate option. - **Activate with AI** enables AI-powered automatic parsing and mapping of log data to service instances and components for contextual alerts. When the integration is activated successfully, the **Overview** tab is displayed. ServiceNow Otto for ITOM collects and analyzes log data. An AI icon indicates that AI is active. - **Activate** activates the integration without AI-powered mapping. The integration is activated and the **Overview** tab is displayed. On the Integrations Launchpad, the integration tile is available in the **Installed integrations** tab. - If you didn't complete all the prior requirements, select **Save draft**. The system saves the integration as a draft in the Integrations Launchpad **Installed integrations** tab, under **Waiting for your action**. At a later time, complete the prerequisites and activate the installation. For more information, see [Activate a draft integration in Health Log Analytics](https://raw.githubusercontent.com/ServiceNow/ServiceNowDocs/australia/markdown/australia/it-operations-management/health-log-analytics/il-connector-hla-activate-draft.md). ## What to do next On the **Overview** tab, do the following: - Use the displayed information to refine how Health Log Analytics reads the log data. For more information, see [Review log streaming data and adjust integration settings in Health Log Analytics](https://raw.githubusercontent.com/ServiceNow/ServiceNowDocs/australia/markdown/australia/it-operations-management/health-log-analytics/il-connector-overview-tab.md). - Use the More options menu \(\[Omitted image "more-options.png"\] Alt text: More options menu icon.\) to open the **Data Input Mapping**, **Source Type Structures**, or **Log Sources** pages with context from the integration. If your log data is not properly mapped, structured, or sourced, go back and adjust the configuration. If the Service Operations Workspace Log Analytics application is installed, the More options menu also provides direct access to the **Log Viewer**. Use the **Log Viewer** to review raw log messages ingested by the integration. For more information, see: - [Log data auto-mapping and mapping](https://raw.githubusercontent.com/ServiceNow/ServiceNowDocs/australia/markdown/australia/it-operations-management/health-log-analytics/hla-data-input-automapping.md) - [Source type structure adjustment](https://raw.githubusercontent.com/ServiceNow/ServiceNowDocs/australia/markdown/australia/it-operations-management/health-log-analytics/hla-source-type-structure-adjustment.md) - [Review alert logs on the Log viewer](https://raw.githubusercontent.com/ServiceNow/ServiceNowDocs/australia/markdown/australia/it-operations-management/health-log-analytics/hla-op-logs-log-viewer-concept-sow.md) If you activated the integration with AI, verify that AI correctly auto-mapped log data to service instances and components. To do this, select **View mapping** under **Log context mapping**. You can override the AI mapping by selecting a different log field from each list. For more information, see [Map logs to service instances, components, source types](https://raw.githubusercontent.com/ServiceNow/ServiceNowDocs/australia/markdown/australia/it-operations-management/health-log-analytics/il-connector-hla-map-business-context.md). **Parent Topic:**[Set up Health Log Analytics on your ServiceNow instance](https://raw.githubusercontent.com/ServiceNow/ServiceNowDocs/australia/markdown/australia/it-operations-management/health-log-analytics/hla-implement.md)