|
Model
|
Product model to which the rule applies.
|
|
Threshold
|
Quantity that the stock must fall below to trigger restocking. Enter a value greater than 0. For example, enter 10 for a laptop computer that you want to restock when inventory in the specified stockroom drops below 10.Current stock includes Available and Reserved assets in the stockroom, plus assets on open transfer orders going to the stockroom.
**Note:** If the stock falls below the threshold, the result depends on the restocking option:
- **Vendor**: The system sends an email to the stockroom manager. If Hardware Asset Management is activated, the system also creates a stock order request automatically.
- **Stockroom**: The system creates a transfer order. The stock rule doesn't send an email or create a stock order request.
|
|
Restocking option
|
Location where additional supplies should come from. If Procurement isn’t active, then restocking option is **Stockroom** only. Otherwise, select one of the following:
- **Stockroom**: Creates a transfer order to obtain the asset from another stockroom.
**Note:** Transfer orders are created only when the parent stockroom meets the following conditions:
- It has assets in the Available state. Assets in other states, such as Reserved or Pending Install, do not qualify.
- Its number of available assets is equal to or greater than the full restocking quantity, not just the raw shortfall.
The restocking quantity is the shortfall \(threshold minus current stock\), rounded up to the nearest multiple of the order size. For example, if the shortfall is 1 and the order size is 5, the restocking quantity is 5. The parent stockroom must have at least 5 available assets. If it has 1 to 4, the system does not create a transfer order.
- **Vendor**: Sends an email to the stockroom manager to order from a vendor. The system also creates records based on whether Hardware Asset Management is active:
- If Hardware Asset Management is active, the system creates a Hardware Inventory Stock Order request, which you source with a purchase order. For enterprise models, it creates an enterprise stock order request.
- If Hardware Asset Management is not active, the system creates a purchase order and a purchase order line item.
**Note:**
- To enable **Purchase** when you source the stock order request, the stock rule’s model must have an active vendor catalog item.
- After a Vendor rule creates an order, the rule does not create another order while that order is open. It resumes after the order closes or after stock rises above the threshold.
**Important:** After a transfer order, purchase order, or purchase order line item is created, it's important to act on it promptly.
|
|
Active
|
Option for enabling the stock rule for restocking automatically.
|
|
Stockroom
|
Stockroom that the rule applies to. This is the stockroom that is restocked when its stock falls below the threshold.
|
|
Parent stockroom
|
Stockroom from which additional supplies are transferred. Required when the restocking option is Stockroom.
|
|
Order size
|
Minimum order quantity for stockroom transfers or vendor purchases. The system calculates the smallest multiple of the order size that restocks the item above the threshold. Enter a value greater than 0. For example, a stockroom has 3 laptops, the threshold is 10, the restocking option is Stockroom, and the order size is 4. The system creates a transfer order for 8 laptops, which brings stock to 11 \(3 in stock + 8 ordered\).
When the restocking option is Vendor, the system emails the stockroom manager the total quantity to order, in multiples of the order size.
**Note:** The order size applies only to transfers that stock rules create automatically. Manual transfers have no such restriction and can move any available quantity from the parent stockroom.
|