name: inovelli-vzm31-sn
components:
  - id: main
    capabilities:
    - id: switch
      version: 1
    - id: switchLevel
      version: 1
    - id: statelessSwitchLevelStep
      version: 1
    - id: powerMeter
      version: 1
    - id: energyMeter
      version: 1
    - id: refresh
      version: 1
    - id: configuration
      version: 1
    - id: firmwareUpdate
      version: 1
    categories:
    - name: Switch
  - id: button1
    label: Down Button
    capabilities:
    - id: button
      version: 1
    categories:
    - name: RemoteController
  - id: button2
    label: Up Button
    capabilities:
      - id: button
        version: 1
    categories:
      - name: RemoteController
  - id: button3
    label: Config Button
    capabilities:
      - id: button
        version: 1
    categories:
      - name: RemoteController
preferences:
  - name: "notificationChild"
    title: "Add Child Device - Notification"
    description: "Create Separate Child Device for Notification Control"
    required: false
    preferenceType: boolean
    definition:
      default: false
  - name: "notificationType"
    title: "Notification Effect"
    description: "This is the notification effect used by the notification child device"
    required: false
    preferenceType: enumeration
    definition:
      options:
        "255": "Clear"
        "1": "Solid"
        "2": "Fast Blink"
        "3": "Slow Blink"
        "4": "Pulse"
        "5": "Chase"
        "6": "Open/Close"
        "7": "Small-to-Big"
        "8": "Aurora"
        "9": "Slow Falling"
        "10": "Medium Falling"
        "11": "Fast Falling"
        "12": "Slow Rising"
        "13": "Medium Rising"
        "14": "Fast Rising"
        "15": "Medium Blink"
        "16": "Slow Chase"
        "17": "Fast Chase"
        "18": "Fast Siren"
        "19": "Slow Siren"
      default: 1
  - name: "parameter258"
    title: "258. Switch Mode"
    description: "Use as a Dimmer or an On/Off switch"
    required: false
    preferenceType: enumeration
    definition:
      options:
        "0": "Dimmer"
        "1": "On/Off (default)"
      default: 1
  - name: "parameter22"
    title: "22. Aux Switch Type"
    description: "Set the Aux switch type. Smart Bulb Mode does not work in Dumb 3-Way Switch mode."
    required: false
    preferenceType: enumeration
    definition:
      options:
        "0": "None (default)"
        "1": "3-Way Dumb Switch"
        "2": "3-Way Aux Switch"
        "3": "Full Sine Wave (fw 2.11+)"
      default: 0
  - name: "parameter52"
    title: "52. Smart Bulb Mode"
    description: "For use with Smart Bulbs that need constant power and are controlled via commands rather than power. Smart Bulb Mode does not work in Dumb 3-Way Switch mode."
    required: false
    preferenceType: enumeration
    definition:
      options:
        "0": "Disabled (default)"
        "1": "Smart Bulb Mode"
      default: 0
  - name: "parameter1"
    title: "1. Dimming Speed (Remote)"
    description: "This changes the speed that the light dims up when controlled from the hub. A setting of '0' turns the light immediately on. Increasing the value slows down the transition speed. Value is multiplied by 100ms. 
  Default=25 (2500ms or 2.5s)"
    required: false
    preferenceType: number
    definition:
      minimum: 0
      maximum: 126
      default: 25
  - name: "parameter2"
    title: "2. Dimming Speed (Local)"
    description: "This changes the speed that the light dims up when controlled at the switch. A setting of '0' turns the light immediately on. Increasing the value slows down the transition speed. Value is multiplied by 100ms. 
  (i.e 25 = 2500ms or 2.5s) Default=127 (Sync with parameter 1)"
    required: false
    preferenceType: number
    definition:
      minimum: 0
      maximum: 127
      default: 127
  - name: "parameter3"
    title: "3. Ramp Rate (Remote)"
    description: "This changes the speed that the light turns on when controlled from the hub. A setting of '0' turns the light immediately on. Increasing the value slows down the transition speed. Value is multiplied by 100ms. 
  (i.e 25 = 2500ms or 2.5s) Default=127 (Sync with parameter 1)"
    required: false
    preferenceType: number
    definition:
      minimum: 0
      maximum: 127
      default: 127
  - name: "parameter4"
    title: "4. Ramp Rate (Local)"
    description: "This changes the speed that the light turns on when controlled at the switch. A setting of '0' turns the light immediately on. Increasing the value slows down the transition speed. Value is multiplied by 100ms. 
  (i.e 25 = 2500ms or 2.5s) Default=127 (Sync with parameter 3)"
    required: false
    preferenceType: number
    definition:
      minimum: 0
      maximum: 127
      default: 127
  - name: "parameter9"
    title: "9. Minimum Level"
    description: "The minimum level that the light can be dimmed. Useful when the user has a light that does not turn on or flickers at a lower level."
    required: false
    preferenceType: number
    definition:
      minimum: 1
      maximum: 99
      default: 1
  - name: "parameter10"
    title: "10. Maximum Level"
    description: "The maximum level that the light can be dimmed. Useful when the user wants to limit the maximum brighness."
    required: false
    preferenceType: number
    definition:
      minimum: 2
      maximum: 100
      default: 100
  - name: "parameter11"
    title: "11. Invert Switch"
    description: "Inverts the orientation of the switch. Useful when the switch is installed upside down. Essentially up becomes down and down becomes up."
    required: false
    preferenceType: enumeration
    definition:
      options:
        "0": "No (default)"
        "1": "Yes"
      default: 0
  - name: "parameter15"
    title: "15. Level After Power Restored"
    description: "The level the switch will return to when power is restored after power failure.
  0=Off
  1-100=Set Level
  101=Use previous level."
    required: false
    preferenceType: number
    definition:
      minimum: 0
      maximum: 101
      default: 101
  - name: "parameter17"
    title: "17. Load Level Indicator Timeout"
    description: "Shows the level that the load is at for x number of seconds after the load is adjusted and then returns to the Default LED state."
    required: false
    preferenceType: enumeration
    definition:
      options:
        "0": "Do not display Load Level"
        "1": "1 Second"
        "2": "2 Seconds"
        "3": "3 Seconds"
        "4": "4 Seconds"
        "5": "5 Seconds"
        "6": "6 Seconds"
        "7": "7 Seconds"
        "8": "8 Seconds"
        "9": "9 Seconds"
        "10": "10 Seconds"
        "11": "Display Load Level with no timeout"
      default: 11
  - name: "parameter95"
    title: "95. LED Indicator Color (w/On)"
    description: "Set the color of the Full LED Indicator when the load is on."
    required: false
    preferenceType: enumeration
    definition:
      options:
        "0": "Red"
        "7": "Orange"
        "28": "Lemon"
        "64": "Lime"
        "85": "Green"
        "106": "Teal"
        "127": "Cyan"
        "148": "Aqua"
        "170": "Blue (default)"
        "190": "Violet"
        "212": "Magenta"
        "234": "Pink"
        "255": "White"
      default: 170
  - name: "parameter96"
    title: "96. LED Indicator Color (w/Off)"
    description: "Set the color of the Full LED Indicator when the load is off."
    required: false
    preferenceType: enumeration
    definition:
      options:
        "0": "Red"
        "7": "Orange"
        "28": "Lemon"
        "64": "Lime"
        "85": "Green"
        "106": "Teal"
        "127": "Cyan"
        "148": "Aqua"
        "170": "Blue (default)"
        "190": "Violet"
        "212": "Magenta"
        "234": "Pink"
        "255": "White"
      default: 170
  - name: "parameter97"
    title: "97. LED Indicator Intensity (w/On)"
    description: "Set the intensity of the Full LED Indicator when the load is on."
    required: false
    preferenceType: number
    definition:
      minimum: 0
      maximum: 100
      default: 50
  - name: "parameter98"
    title: "98. LED Indicator Intensity (w/Off)"
    description: "Set the intensity of the Full LED Indicator when the load is off."
    required: false
    preferenceType: number
    definition:
      minimum: 0
      maximum: 100
      default: 5