/**
 *  Copyright 2017 SmartThings
 *
 *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
 *  in compliance with the License. You may obtain a copy of the License at:
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
 *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
 *  for the specific language governing permissions and limitations under the License.
 *
 */
import groovy.json.JsonOutput


metadata {
	definition (name: "Z-Wave Window Shade", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.blind") {
		capability "Window Shade"
		capability "Window Shade Level"
		capability "Window Shade Preset"
		capability "Switch Level"
		capability "Battery"
		capability "Refresh"
		capability "Health Check"
		capability "Actuator"
		capability "Sensor"

		command "stop"

		// This device handler is specifically for non-SWF position-aware window coverings
		//
		fingerprint type: "0x1107", cc: "0x5E,0x26", deviceJoinName: "Window Treatment" //Window Shade
		fingerprint type: "0x9A00", cc: "0x5E,0x26", deviceJoinName: "Window Treatment" //Window Shade
//		fingerprint mfr:"026E", prod:"4353", model:"5A31", deviceJoinName: "Window Blinds"
//		fingerprint mfr:"026E", prod:"5253", model:"5A31", deviceJoinName: "Roller Shade"
	}

	simulator {
		status "open":  "command: 2603, payload: FF"
		status "closed": "command: 2603, payload: 00"
		status "10%": "command: 2603, payload: 0A"
		status "66%": "command: 2603, payload: 42"
		status "99%": "command: 2603, payload: 63"
		status "battery 100%": "command: 8003, payload: 64"
		status "battery low": "command: 8003, payload: FF"

		// reply messages
		reply "2001FF,delay 1000,2602": "command: 2603, payload: 10 FF FE"
		reply "200100,delay 1000,2602": "command: 2603, payload: 60 00 FE"
		reply "200142,delay 1000,2602": "command: 2603, payload: 10 42 FE"
		reply "200163,delay 1000,2602": "command: 2603, payload: 10 63 FE"
	}

	tiles(scale: 2) {
		multiAttributeTile(name:"windowShade", type: "lighting", width: 6, height: 4){
			tileAttribute ("device.windowShade", key: "PRIMARY_CONTROL") {
				attributeState "open", label:'${name}', action:"close", icon:"st.shades.shade-open", backgroundColor:"#00A0DC", nextState:"closing"
				attributeState "closed", label:'${name}', action:"open", icon:"st.shades.shade-closed", backgroundColor:"#ffffff", nextState:"opening"
				attributeState "partially open", label:'Open', action:"close", icon:"st.shades.shade-open", backgroundColor:"#00A0DC", nextState:"closing"
				attributeState "opening", label:'${name}', action:"stop", icon:"st.shades.shade-opening", backgroundColor:"#00A0DC", nextState:"partially open"
				attributeState "closing", label:'${name}', action:"stop", icon:"st.shades.shade-closing", backgroundColor:"#ffffff", nextState:"partially open"
			}
			tileAttribute ("device.windowShadeLevel", key: "SLIDER_CONTROL") {
				attributeState "shadeLevel", action:"setShadeLevel"
			}
		}

		standardTile("home", "device.level", width: 2, height: 2, decoration: "flat") {
			state "default", label: "home", action:"presetPosition", icon:"st.Home.home2"
		}

		standardTile("refresh", "device.refresh", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh", nextState: "disabled"
			state "disabled", label:'', action:"", icon:"st.secondary.refresh"
		}

		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
			state "battery", label:'${currentValue}% battery', unit:""
		}

		preferences {
			input "preset", "number", title: "Preset position", description: "Set the window shade preset position", defaultValue: 50, range: "1..100", required: false, displayDuringSetup: false
		}

		main(["windowShade"])
		details(["windowShade", "home", "refresh", "battery"])

	}
}

def parse(String description) {
	def result = null

	if (device.currentValue("shadeLevel") == null && device.currentValue("level") != null) {
		sendEvent(name: "shadeLevel", value: device.currentValue("level"), unit: "%")
	}

	//if (description =~ /command: 2603, payload: ([0-9A-Fa-f]{6})/)
	// TODO: Workaround manual parsing of v4 multilevel report
	def cmd = zwave.parse(description, [0x20: 1, 0x26: 3])  // TODO: switch to SwitchMultilevel v4 and use target value
	if (cmd) {
		result = zwaveEvent(cmd)
	}
	log.debug "Parsed '$description' to ${result.inspect()}"
	return result
}

def getCheckInterval() {
	// These are battery-powered devices, and it's not very critical
	// to know whether they're online or not – 12 hrs
	4 * 60 * 60
}

def installed() {
	sendEvent(name: "checkInterval", value: checkInterval, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID, offlinePingable: "1"])
	sendEvent(name: "supportedWindowShadeCommands", value: JsonOutput.toJson(["open", "close", "pause"]), displayed: false)
	response(refresh())
}

def updated() {
	if (device.latestValue("checkInterval") != checkInterval) {
		sendEvent(name: "checkInterval", value: checkInterval, displayed: false)
	}
	if (!device.latestState("battery")) {
		response(zwave.batteryV1.batteryGet())
	}
}

def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
	handleLevelReport(cmd)
}

def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
	handleLevelReport(cmd)
}

def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv3.SwitchMultilevelReport cmd) {
	handleLevelReport(cmd)
}

private handleLevelReport(physicalgraph.zwave.Command cmd) {
	def descriptionText = null
	def shadeValue = null

	def level = cmd.value as Integer
	if (level >= 99) {
		level = 100
		shadeValue = "open"
	} else if (level <= 0) {
		level = 0  // unlike dimmer switches, the level isn't saved when closed
		shadeValue = "closed"
	} else {
		shadeValue = "partially open"
		descriptionText = "${device.displayName} shade is ${level}% open"
	}
	checkLevelReport(level)

	def levelEvent = createEvent(name: "level", value: level, unit: "%", displayed: false)
	def shadeLevelEvent = createEvent(name: "shadeLevel", value: level, unit: "%")
	def stateEvent = createEvent(name: "windowShade", value: shadeValue, descriptionText: descriptionText, isStateChange: shadeLevelEvent.isStateChange)

	def result = [stateEvent, shadeLevelEvent, levelEvent]
	if (!state.lastbatt || now() - state.lastbatt > 24 * 60 * 60 * 1000) {
		log.debug "requesting battery"
		state.lastbatt = (now() - 23 * 60 * 60 * 1000) // don't queue up multiple battery reqs in a row
		result << response(["delay 15000", zwave.batteryV1.batteryGet().format()])
	}
	result
}

def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv3.SwitchMultilevelStopLevelChange cmd) {
	[ createEvent(name: "windowShade", value: "partially open", displayed: false, descriptionText: "$device.displayName shade stopped"),
	  response(zwave.switchMultilevelV1.switchMultilevelGet().format()) ]
}

def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
	def map = [ name: "battery", unit: "%" ]

	if (cmd.batteryLevel == 0xFF) {
		map.value = 1
		map.descriptionText = "${device.displayName} has a low battery"
		map.isStateChange = true
	} else {
		map.value = cmd.batteryLevel
	}

	state.lastbatt = now()

	createEvent(map)
}

def zwaveEvent(physicalgraph.zwave.Command cmd) {
	log.debug "unhandled $cmd"
	return []
}

def open() {
	log.debug "open()"

	setShadeLevel(99)
}

def close() {
	log.debug "close()"

	setShadeLevel(0)
}

def setLevel(value, duration = null) {
	log.debug "setLevel($value)"

	setShadeLevel(value)
}

def setShadeLevel(value) {
	Integer level = Math.max(Math.min(value as Integer, 99), 0)

	log.debug "setShadeLevel($value) -> $level"

	levelChangeFollowUp(level) // Follow up in a few seconds to make sure the shades didn't "forget" to send us level updates
	zwave.basicV1.basicSet(value: level).format()
}

def presetPosition() {
	setLevel(preset ?: state.preset ?: 50)
}

def pause() {
	log.debug "pause()"

	stop()
}

def stop() {
	log.debug "stop()"

	zwave.switchMultilevelV3.switchMultilevelStopLevelChange().format()
}

def ping() {
	zwave.switchMultilevelV1.switchMultilevelGet().format()
}

def refresh() {
	log.debug "refresh()"
	delayBetween([
			zwave.switchMultilevelV1.switchMultilevelGet().format(),
			zwave.batteryV1.batteryGet().format()
	], 1500)
}

def levelChangeFollowUp(expectedLevel) {
	state.expectedValue = expectedLevel
	state.levelChecks = 0
	runIn(5, "checkLevel", [overwrite: true])
}

def checkLevelReport(value) {
	if (state.expectedValue != null) {
		if ((state.expectedValue == 99 && value >= 99) ||
			(value >= state.expectedValue - 2 && value <= state.expectedValue + 2)) {
			unschedule("checkLevel")
		}
	}
}

def checkLevel() {
	if (state.levelChecks != null && state.levelChecks < 5) {
		state.levelChecks = state.levelChecks + 1
		runIn(5, "checkLevel", [overwrite: true])
		sendHubCommand(zwave.switchMultilevelV1.switchMultilevelGet())
	} else {
		unschedule("checkLevel")
	}
}