(kicad_pcb (version 20211014) (generator pcbnew)

  (general
    (thickness 1.6)
  )

  (paper "A4")
  (layers
    (0 "F.Cu" signal)
    (31 "B.Cu" signal)
    (32 "B.Adhes" user "B.Adhesive")
    (33 "F.Adhes" user "F.Adhesive")
    (34 "B.Paste" user)
    (35 "F.Paste" user)
    (36 "B.SilkS" user "B.Silkscreen")
    (37 "F.SilkS" user "F.Silkscreen")
    (38 "B.Mask" user)
    (39 "F.Mask" user)
    (40 "Dwgs.User" user "User.Drawings")
    (41 "Cmts.User" user "User.Comments")
    (42 "Eco1.User" user "User.Eco1")
    (43 "Eco2.User" user "User.Eco2")
    (44 "Edge.Cuts" user)
    (45 "Margin" user)
    (46 "B.CrtYd" user "B.Courtyard")
    (47 "F.CrtYd" user "F.Courtyard")
    (48 "B.Fab" user)
    (49 "F.Fab" user)
    (50 "User.1" user)
    (51 "User.2" user)
    (52 "User.3" user)
    (53 "User.4" user)
    (54 "User.5" user)
    (55 "User.6" user)
    (56 "User.7" user)
    (57 "User.8" user)
    (58 "User.9" user)
  )

  (setup
    (pad_to_mask_clearance 0)
    (pcbplotparams
      (layerselection 0x00010fc_ffffffff)
      (disableapertmacros false)
      (usegerberextensions false)
      (usegerberattributes true)
      (usegerberadvancedattributes true)
      (creategerberjobfile true)
      (svguseinch false)
      (svgprecision 6)
      (excludeedgelayer true)
      (plotframeref false)
      (viasonmask false)
      (mode 1)
      (useauxorigin false)
      (hpglpennumber 1)
      (hpglpenspeed 20)
      (hpglpendiameter 15.000000)
      (dxfpolygonmode true)
      (dxfimperialunits true)
      (dxfusepcbnewfont true)
      (psnegative false)
      (psa4output false)
      (plotreference true)
      (plotvalue true)
      (plotinvisibletext false)
      (sketchpadsonfab false)
      (subtractmaskfromsilk false)
      (outputformat 1)
      (mirror false)
      (drillshape 1)
      (scaleselection 1)
      (outputdirectory "")
    )
  )

  (net 0 "")
  (net 1 "+5V")
  (net 2 "GND")
  (net 3 "+3V3")
  (net 4 "/ESP8266/EN")
  (net 5 "/ESP8266/RST")
  (net 6 "/ESP8266/A0")
  (net 7 "/ESP8266/GPIO16")
  (net 8 "/ESP8266/GPIO14")
  (net 9 "/ESP8266/GPIO12")
  (net 10 "/ESP8266/GPIO13")
  (net 11 "/ESP8266/GPIO15")
  (net 12 "/ESP8266/GPIO4{slash}SDA")
  (net 13 "/ESP8266/GPIO5{slash}SCL")
  (net 14 "/ESP8266/GPIO2")
  (net 15 "/ESP8266/GPIO0")
  (net 16 "/ESP8266/RX")
  (net 17 "/ESP8266/TX")
  (net 18 "Net-(J5-PadA5)")
  (net 19 "/ESP8266/Dp")
  (net 20 "/ESP8266/Dn")
  (net 21 "unconnected-(J5-PadA8)")
  (net 22 "Net-(J5-PadB5)")
  (net 23 "unconnected-(J5-PadB8)")
  (net 24 "Net-(JP1-Pad2)")
  (net 25 "Net-(JP2-Pad2)")
  (net 26 "/ESP8266/RTS")
  (net 27 "/ESP8266/DTR")
  (net 28 "/ESP8266/ADC")
  (net 29 "unconnected-(U2-Pad7)")
  (net 30 "unconnected-(U2-Pad8)")
  (net 31 "unconnected-(U2-Pad9)")
  (net 32 "unconnected-(U2-Pad10)")
  (net 33 "unconnected-(U2-Pad11)")
  (net 34 "unconnected-(U2-Pad12)")
  (net 35 "unconnected-(U2-Pad15)")
  (net 36 "unconnected-(U3-Pad9)")
  (net 37 "unconnected-(U3-Pad10)")
  (net 38 "unconnected-(U3-Pad11)")
  (net 39 "unconnected-(U3-Pad12)")
  (net 40 "unconnected-(U3-Pad13)")
  (net 41 "unconnected-(U3-Pad14)")
  (net 42 "unconnected-(J2-PadMP)")
  (net 43 "unconnected-(J3-PadMP)")
  (net 44 "/certification/GPIO4{slash}SDA")
  (net 45 "/certification/GPIO5{slash}SCL")
  (net 46 "unconnected-(U4-Pad6)")

  (footprint "Package_TO_SOT_SMD:SOT-363_SC-70-6" (layer "F.Cu")
    (tedit 5A02FF57) (tstamp 029a45ce-7cb8-4d78-bbd5-f36d253fa1d1)
    (at 63 94 90)
    (descr "SOT-363, SC-70-6")
    (tags "SOT-363 SC-70-6")
    (property "LCSC" "C62892")
    (property "Sheetfile" "esp8266-arduino-section.kicad_sch")
    (property "Sheetname" "ESP8266")
    (path "/ff3625c2-684b-47d8-96d9-4a80a872bce2/ff2c003f-9691-4482-94be-8b7af25ca737")
    (attr smd)
    (fp_text reference "Q1" (at 0 -2 90) (layer "F.SilkS")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp 619e3306-c53b-4162-9871-3f6b5bfbea63)
    )
    (fp_text value "UMH3N" (at 0 2 90) (layer "F.Fab")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp dbc851dd-f0af-4bf4-8ea8-cb2ac7cd18a8)
    )
    (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab")
      (effects (font (size 0.5 0.5) (thickness 0.075)))
      (tstamp 79741504-1f2b-4094-974c-689492a6bd1a)
    )
    (fp_line (start -0.7 1.16) (end 0.7 1.16) (layer "F.SilkS") (width 0.12) (tstamp 105c86fa-9884-4fad-a69f-0139caa63b60))
    (fp_line (start 0.7 -1.16) (end -1.2 -1.16) (layer "F.SilkS") (width 0.12) (tstamp 84f23625-82d5-4d51-bf0c-863492d55317))
    (fp_line (start -1.6 -1.4) (end -1.6 1.4) (layer "F.CrtYd") (width 0.05) (tstamp 8c718c35-c183-4a0e-890d-6e260578dfc8))
    (fp_line (start -1.6 -1.4) (end 1.6 -1.4) (layer "F.CrtYd") (width 0.05) (tstamp b0972c7d-25f8-401a-92be-1bc54179268c))
    (fp_line (start -1.6 1.4) (end 1.6 1.4) (layer "F.CrtYd") (width 0.05) (tstamp d30c8658-02e0-48c0-8071-415bb23970ec))
    (fp_line (start 1.6 1.4) (end 1.6 -1.4) (layer "F.CrtYd") (width 0.05) (tstamp eed4ac7d-c6c0-4bdf-b9c0-2d4e710b94a2))
    (fp_line (start -0.675 -0.6) (end -0.675 1.1) (layer "F.Fab") (width 0.1) (tstamp 0fb5633e-a342-4136-bcf9-1f98010ca419))
    (fp_line (start 0.675 -1.1) (end 0.675 1.1) (layer "F.Fab") (width 0.1) (tstamp 41b731e4-48b5-4997-a5b8-e9a38306caf1))
    (fp_line (start 0.675 -1.1) (end -0.175 -1.1) (layer "F.Fab") (width 0.1) (tstamp 5208ce5a-f101-48c2-a90d-b68c1aad66a3))
    (fp_line (start -0.175 -1.1) (end -0.675 -0.6) (layer "F.Fab") (width 0.1) (tstamp 5d3c2692-0b24-4a5b-96b8-210814fcf873))
    (fp_line (start 0.675 1.1) (end -0.675 1.1) (layer "F.Fab") (width 0.1) (tstamp 897e0da8-e62c-4c1a-aa8b-bae3ea560e81))
    (pad "1" smd rect (at -0.95 -0.65 90) (size 0.65 0.4) (layers "F.Cu" "F.Paste" "F.Mask")
      (net 26 "/ESP8266/RTS") (pinfunction "E1") (pintype "passive") (tstamp 5e9f145d-bc34-443a-9ae5-814a3d4e033c))
    (pad "2" smd rect (at -0.95 0 90) (size 0.65 0.4) (layers "F.Cu" "F.Paste" "F.Mask")
      (net 27 "/ESP8266/DTR") (pinfunction "B1") (pintype "input") (tstamp 3204cf5e-0e29-4254-97e1-f481d4f811a9))
    (pad "3" smd rect (at -0.95 0.65 90) (size 0.65 0.4) (layers "F.Cu" "F.Paste" "F.Mask")
      (net 15 "/ESP8266/GPIO0") (pinfunction "C2") (pintype "passive") (tstamp 4cf74bac-c9a0-4a57-a8d2-e6dbbd575742))
    (pad "4" smd rect (at 0.95 0.65 90) (size 0.65 0.4) (layers "F.Cu" "F.Paste" "F.Mask")
      (net 27 "/ESP8266/DTR") (pinfunction "E2") (pintype "passive") (tstamp 47973534-5173-445b-b81b-65e685bb2ee4))
    (pad "5" smd rect (at 0.95 0 90) (size 0.65 0.4) (layers "F.Cu" "F.Paste" "F.Mask")
      (net 26 "/ESP8266/RTS") (pinfunction "B2") (pintype "input") (tstamp a9c7a0e3-6be1-437f-a60c-f4356786a41e))
    (pad "6" smd rect (at 0.95 -0.65 90) (size 0.65 0.4) (layers "F.Cu" "F.Paste" "F.Mask")
      (net 4 "/ESP8266/EN") (pinfunction "C1") (pintype "passive") (tstamp a3c41f23-bae7-453b-91a4-434f3581c94d))
    (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-363_SC-70-6.wrl"
      (offset (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (footprint "Capacitor_SMD:C_0603_1608Metric" (layer "F.Cu")
    (tedit 5F68FEEE) (tstamp 126b4f95-2421-4df8-aaff-e4dba218e29d)
    (at 112 83)
    (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
    (tags "capacitor")
    (property "LCSC" "C14663")
    (property "PN" "FG28X5R1E475KRT06")
    (property "Sheetfile" "certification-section.kicad_sch")
    (property "Sheetname" "certification")
    (path "/e97f5c9f-b2e7-43c2-9365-8a41f52decb4/8b6e07f9-dbbe-4bde-aa8a-b771e503cca0")
    (attr smd)
    (fp_text reference "C6" (at 0 -1.43) (layer "F.SilkS")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp a435e9a5-7616-4099-96f2-ede933ae7ed2)
    )
    (fp_text value "100nF" (at 0 1.43) (layer "F.Fab")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp 7c9adffe-9e55-4493-b1ce-cb80289b512f)
    )
    (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab")
      (effects (font (size 0.4 0.4) (thickness 0.06)))
      (tstamp 4bff4d15-1446-4517-839c-9433d6f48458)
    )
    (fp_line (start -0.14058 0.51) (end 0.14058 0.51) (layer "F.SilkS") (width 0.12) (tstamp 52e04e7e-019c-45a8-baa9-d57035b3da04))
    (fp_line (start -0.14058 -0.51) (end 0.14058 -0.51) (layer "F.SilkS") (width 0.12) (tstamp c0d893a6-b15a-4859-8bf9-5183758ad454))
    (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer "F.CrtYd") (width 0.05) (tstamp 712ae58a-0475-4ac2-bc4c-ca3ca9c202e9))
    (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer "F.CrtYd") (width 0.05) (tstamp b27a152f-3059-4910-8237-102e21bf2080))
    (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer "F.CrtYd") (width 0.05) (tstamp c63e7052-a9e7-451b-bbe7-9943224b3bb9))
    (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer "F.CrtYd") (width 0.05) (tstamp f5dca88e-d859-42e6-9675-ffbc079af405))
    (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer "F.Fab") (width 0.1) (tstamp 3913d9bc-8f35-40d3-8b9b-900b0273f554))
    (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp 474ba332-a092-4c2e-a0ac-693153760645))
    (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp d64fe18d-5b81-44ab-90b2-4eaf304e3c23))
    (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer "F.Fab") (width 0.1) (tstamp fff2299d-bf78-49ff-9a59-e0811c230692))
    (pad "1" smd roundrect (at -0.775 0) (size 0.9 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25)
      (net 1 "+5V") (pintype "passive") (tstamp cbb31472-ca20-4295-a6a7-95e54644f4ee))
    (pad "2" smd roundrect (at 0.775 0) (size 0.9 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25)
      (net 2 "GND") (pintype "passive") (tstamp e63f4856-db36-46c6-9c02-2a6c34cdff98))
    (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl"
      (offset (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (footprint "Capacitor_SMD:C_0603_1608Metric" (layer "F.Cu")
    (tedit 5F68FEEE) (tstamp 142ed7c3-6ed5-45b4-850a-7e7db36479a1)
    (at 41 102)
    (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
    (tags "capacitor")
    (property "LCSC" "C14663")
    (property "PN" "FG28X5R1E475KRT06")
    (property "Sheetfile" "esp8266-arduino-section.kicad_sch")
    (property "Sheetname" "ESP8266")
    (path "/ff3625c2-684b-47d8-96d9-4a80a872bce2/f28cd972-c015-4925-a553-94f4814b77e6")
    (attr smd)
    (fp_text reference "C7" (at 0 -1.43) (layer "F.SilkS")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp 522a355e-0aba-40f8-acc6-ba219c1641e7)
    )
    (fp_text value "100nF" (at 0 1.43) (layer "F.Fab")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp 6d1196a3-f1de-433b-81d5-2be540bc627b)
    )
    (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab")
      (effects (font (size 0.4 0.4) (thickness 0.06)))
      (tstamp 9015a948-b2d7-479d-8696-35d2d12d3646)
    )
    (fp_line (start -0.14058 0.51) (end 0.14058 0.51) (layer "F.SilkS") (width 0.12) (tstamp 5c684f51-67ab-4b82-92c9-fc45aaffbfb3))
    (fp_line (start -0.14058 -0.51) (end 0.14058 -0.51) (layer "F.SilkS") (width 0.12) (tstamp e085deab-00d2-4049-9b19-c77570d6f8e6))
    (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer "F.CrtYd") (width 0.05) (tstamp 3813520e-4661-427f-9ac6-29fd5bcdfe73))
    (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer "F.CrtYd") (width 0.05) (tstamp 951df1e7-730c-4296-ab41-7fc27958be15))
    (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer "F.CrtYd") (width 0.05) (tstamp b9168f77-b5a5-4161-8a9b-951a2e8475d3))
    (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer "F.CrtYd") (width 0.05) (tstamp d9db4625-ab1d-4e73-85e5-8fcf5e52a84c))
    (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer "F.Fab") (width 0.1) (tstamp 4346e9c4-5b84-45cb-85f3-bcac369120da))
    (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer "F.Fab") (width 0.1) (tstamp 4a04a193-13b9-47d8-ba40-6aebbbb44acc))
    (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp 9e9cc1b2-6200-49f6-864a-1a27c45b47b2))
    (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp e65d48bd-55b4-4c9e-807b-d094278c11de))
    (pad "1" smd roundrect (at -0.775 0) (size 0.9 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25)
      (net 2 "GND") (pintype "passive") (tstamp 02bed9e6-16fe-48a8-9fa1-1d74bd6f3b55))
    (pad "2" smd roundrect (at 0.775 0) (size 0.9 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25)
      (net 5 "/ESP8266/RST") (pintype "passive") (tstamp 6c06ac28-a09d-4361-8848-fe286b2fffb4))
    (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl"
      (offset (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (footprint "Capacitor_SMD:C_0603_1608Metric" (layer "F.Cu")
    (tedit 5F68FEEE) (tstamp 19845f92-f248-4769-b128-3633a5136068)
    (at 52 90 90)
    (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
    (tags "capacitor")
    (property "LCSC" "C14663")
    (property "PN" "FG28X5R1E475KRT06")
    (property "Sheetfile" "esp8266-arduino-section.kicad_sch")
    (property "Sheetname" "ESP8266")
    (path "/ff3625c2-684b-47d8-96d9-4a80a872bce2/96cc2706-c25c-493b-9e5d-274ac847023d")
    (attr smd)
    (fp_text reference "C4" (at 0 -1.43 90) (layer "F.SilkS")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp 0284da35-ee51-4e9c-b356-df5cdafc1cfe)
    )
    (fp_text value "100nF" (at 0 1.43 90) (layer "F.Fab")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp 80345cc3-8dfc-446d-b098-bb709ee9e436)
    )
    (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab")
      (effects (font (size 0.4 0.4) (thickness 0.06)))
      (tstamp d68d6dc7-55de-4be2-86b8-7fe7ffa1ab70)
    )
    (fp_line (start -0.14058 0.51) (end 0.14058 0.51) (layer "F.SilkS") (width 0.12) (tstamp af211894-46f3-4b83-b036-39f5adeb3559))
    (fp_line (start -0.14058 -0.51) (end 0.14058 -0.51) (layer "F.SilkS") (width 0.12) (tstamp d91ac24b-581f-4f4c-9fc8-0f0a94468dc0))
    (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer "F.CrtYd") (width 0.05) (tstamp 54e91bd8-c4ed-49eb-a472-7d819b86c6b4))
    (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer "F.CrtYd") (width 0.05) (tstamp 57a7826e-5980-498c-922b-3b8198c51f3c))
    (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer "F.CrtYd") (width 0.05) (tstamp 6c487e45-e325-44dc-856c-c515a5c41d28))
    (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer "F.CrtYd") (width 0.05) (tstamp 6d492018-2f74-4737-9d0a-647b0d72305b))
    (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp 1f1b475a-2f2e-4cb0-b565-67c2c93fdf39))
    (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer "F.Fab") (width 0.1) (tstamp 856b58ea-02ad-496e-8fe5-0466ea628f86))
    (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp bcc64dae-df1a-494b-a822-5d592cc584ed))
    (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer "F.Fab") (width 0.1) (tstamp ea1d2dfb-c61c-4c57-a103-d94b0d2a4def))
    (pad "1" smd roundrect (at -0.775 0 90) (size 0.9 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25)
      (net 3 "+3V3") (pintype "passive") (tstamp 125965f3-c19e-407c-95a6-cffdf1747b91))
    (pad "2" smd roundrect (at 0.775 0 90) (size 0.9 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25)
      (net 2 "GND") (pintype "passive") (tstamp cae99855-08c3-4def-ad66-766b114c1ec5))
    (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl"
      (offset (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (footprint "Button_Switch_SMD:SW_SPST_SKQG_WithStem" (layer "F.Cu")
    (tedit 61D4AAD5) (tstamp 19cb165c-26b0-4fec-a555-301ba9e51fcf)
    (at 43 107 180)
    (descr "ALPS 5.2mm Square Low-profile Type (Surface Mount) SKQG Series, With stem, http://www.alps.com/prod/info/E/HTML/Tact/SurfaceMount/SKQG/SKQGAFE010.html")
    (tags "SPST Button Switch")
    (property "LCSC" "C318884")
    (property "Sheetfile" "esp8266-arduino-section.kicad_sch")
    (property "Sheetname" "ESP8266")
    (path "/ff3625c2-684b-47d8-96d9-4a80a872bce2/d068c1cf-5dac-465b-bf82-5f9719acf90c")
    (attr smd)
    (fp_text reference "SW1" (at 0 -3.6) (layer "F.SilkS")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp 8700ab2f-00e5-46c9-b171-b9ee6fa174d6)
    )
    (fp_text value "SW_Push" (at 0 3.6) (layer "F.Fab")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp b1f80856-9581-4053-8dfc-152ca33be760)
    )
    (fp_text user "No F.Cu tracks" (at 2.5 0.2) (layer "Cmts.User")
      (effects (font (size 0.2 0.2) (thickness 0.03)))
      (tstamp 49a7ab2b-49b4-4f36-bf06-05294ecce5e6)
    )
    (fp_text user "KEEP-OUT ZONE" (at -2.5 -0.2) (layer "Cmts.User")
      (effects (font (size 0.2 0.2) (thickness 0.03)))
      (tstamp 53f7f022-564f-4190-95aa-0fd1ae02902f)
    )
    (fp_text user "KEEP-OUT ZONE" (at 2.5 -0.2) (layer "Cmts.User")
      (effects (font (size 0.2 0.2) (thickness 0.03)))
      (tstamp 92b379be-c191-4668-aa96-11e6aa202a62)
    )
    (fp_text user "No F.Cu tracks" (at -2.5 0.2) (layer "Cmts.User")
      (effects (font (size 0.2 0.2) (thickness 0.03)))
      (tstamp 9e805701-e93f-4308-a785-29d7de95ebbf)
    )
    (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab")
      (effects (font (size 0.4 0.4) (thickness 0.06)))
      (tstamp ac37cbab-f03f-4235-9a1f-6a3c0dcf6a78)
    )
    (fp_line (start 1.45 2.72) (end 1.94 2.23) (layer "F.SilkS") (width 0.12) (tstamp 16fc3172-868d-4dd1-b1f2-7b6e17f47dfa))
    (fp_line (start -1.45 2.72) (end -1.94 2.23) (layer "F.SilkS") (width 0.12) (tstamp 325e2350-9e90-4a43-b982-7f2ccc491ecc))
    (fp_line (start -1.45 -2.72) (end 1.45 -2.72) (layer "F.SilkS") (width 0.12) (tstamp 39acf4c6-66ca-4ad2-a0cc-250788523c07))
    (fp_line (start -1.45 2.72) (end 1.45 2.72) (layer "F.SilkS") (width 0.12) (tstamp 3dce5c9e-e327-4427-bf18-58ac04cb3540))
    (fp_line (start -1.45 -2.72) (end -1.94 -2.23) (layer "F.SilkS") (width 0.12) (tstamp aeb1eef4-678d-4c26-bfd7-561469a33328))
    (fp_line (start 1.45 -2.72) (end 1.94 -2.23) (layer "F.SilkS") (width 0.12) (tstamp c26279cc-cf58-43ec-a2b9-455e90b8ea0a))
    (fp_line (start -2.72 1.04) (end -2.72 -1.04) (layer "F.SilkS") (width 0.12) (tstamp eb1f167d-1559-4471-b730-0540904bc57a))
    (fp_line (start 2.72 1.04) (end 2.72 -1.04) (layer "F.SilkS") (width 0.12) (tstamp f903568f-8e23-4167-ba6d-0efbc82e5602))
    (fp_line (start -4.25 2.85) (end 4.25 2.85) (layer "F.CrtYd") (width 0.05) (tstamp 0818c72a-63fc-4da0-9885-59ab7c0e8664))
    (fp_line (start 4.25 2.85) (end 4.25 -2.85) (layer "F.CrtYd") (width 0.05) (tstamp 49096971-f2b7-410b-867a-2b9c392a63fd))
    (fp_line (start -4.25 -2.85) (end -4.25 2.85) (layer "F.CrtYd") (width 0.05) (tstamp 949c0540-ae6d-43f9-89a3-3640cf09bb0e))
    (fp_line (start 4.25 -2.85) (end -4.25 -2.85) (layer "F.CrtYd") (width 0.05) (tstamp c2e88627-1b57-4dc0-8ee0-f5cfa735d83c))
    (fp_line (start -2.6 -1.4) (end -1.4 -2.6) (layer "F.Fab") (width 0.1) (tstamp 1370e52f-85e8-45fd-97e9-c4c34a9e13ec))
    (fp_line (start -0.95 -1.865) (end -1.865 -0.95) (layer "F.Fab") (width 0.1) (tstamp 4ba3c501-2d18-4539-8153-fa35037abdfb))
    (fp_line (start -1.4 -2.6) (end 1.4 -2.6) (layer "F.Fab") (width 0.1) (tstamp 4c0c7b54-fcd4-41cb-9371-903e216f7e04))
    (fp_line (start -1.4 2.6) (end -2.6 1.4) (layer "F.Fab") (width 0.1) (tstamp 5f5dc156-a8a4-4775-90ba-b5be00b15f26))
    (fp_line (start 1.865 -0.95) (end 1.865 0.95) (layer "F.Fab") (width 0.1) (tstamp 6194da66-6534-470a-8eb2-2838334a3776))
    (fp_line (start 0.95 1.865) (end -0.95 1.865) (layer "F.Fab") (width 0.1) (tstamp 85030987-47f5-4397-a445-405f68441290))
    (fp_line (start 0.95 -1.865) (end 1.865 -0.95) (layer "F.Fab") (width 0.1) (tstamp 8c970b56-5ece-47b5-9ae5-e83a08ba44c9))
    (fp_line (start 1.4 2.6) (end -1.4 2.6) (layer "F.Fab") (width 0.1) (tstamp 8f47bff4-46fb-49f7-a73e-5939f2cfe4bf))
    (fp_line (start 2.6 1.4) (end 1.4 2.6) (layer "F.Fab") (width 0.1) (tstamp 93c6ca1d-89fb-4e20-97f1-cb069006035b))
    (fp_line (start 1.4 -2.6) (end 2.6 -1.4) (layer "F.Fab") (width 0.1) (tstamp a00620b0-24bd-47cb-8cf7-e7ff3d5e3a9c))
    (fp_line (start 0.95 1.865) (end 1.865 0.95) (layer "F.Fab") (width 0.1) (tstamp b3fa7517-182a-46f9-b074-935e695b547a))
    (fp_line (start -2.6 1.4) (end -2.6 -1.4) (layer "F.Fab") (width 0.1) (tstamp b9652576-de21-43f1-81a9-c2e443eba7c6))
    (fp_line (start -0.95 1.865) (end -1.865 0.95) (layer "F.Fab") (width 0.1) (tstamp bc83d7bf-06a9-41de-b6f2-2bf2746da615))
    (fp_line (start -0.95 -1.865) (end 0.95 -1.865) (layer "F.Fab") (width 0.1) (tstamp becf77cf-8c5f-4726-90a1-d7af7add62ba))
    (fp_line (start 2.6 -1.4) (end 2.6 1.4) (layer "F.Fab") (width 0.1) (tstamp bedd29c5-f2be-46af-960f-6897de22c6be))
    (fp_line (start -1.865 0.95) (end -1.865 -0.95) (layer "F.Fab") (width 0.1) (tstamp f0b0c5bb-8cc6-4a0c-9497-75b43ee64bfc))
    (fp_circle (center 0 0) (end 1 0) (layer "F.Fab") (width 0.1) (fill none) (tstamp 2d61294a-7545-4a19-a979-caf9fac18ee0))
    (pad "1" smd rect (at 3.1 -1.85 180) (size 1.8 1.1) (layers "F.Cu" "F.Paste" "F.Mask")
      (net 2 "GND") (pinfunction "1") (pintype "passive") (tstamp 0f3ade8b-8c7c-4ab6-abf2-88bd682c75b1))
    (pad "1" smd rect (at -3.1 -1.85 180) (size 1.8 1.1) (layers "F.Cu" "F.Paste" "F.Mask")
      (net 2 "GND") (pinfunction "1") (pintype "passive") (tstamp 8b144c65-7c06-4911-8d57-90f1a8053cdb))
    (pad "2" smd rect (at 3.1 1.85 180) (size 1.8 1.1) (layers "F.Cu" "F.Paste" "F.Mask")
      (net 5 "/ESP8266/RST") (pinfunction "2") (pintype "passive") (tstamp 533b1fcb-22d8-401d-b7de-5d17e911474c))
    (pad "2" smd rect (at -3.1 1.85 180) (size 1.8 1.1) (layers "F.Cu" "F.Paste" "F.Mask")
      (net 5 "/ESP8266/RST") (pinfunction "2") (pintype "passive") (tstamp 98471c0f-e805-4262-a21c-274de55a0fef))
    (zone (net 0) (net_name "") (layer "F.Cu") (tstamp 1e109b75-58b1-4d3f-a854-eb7f3198aff6) (hatch full 0.508)
      (connect_pads (clearance 0))
      (min_thickness 0.254)
      (keepout (tracks not_allowed) (vias not_allowed) (pads not_allowed ) (copperpour not_allowed) (footprints not_allowed))
      (fill (thermal_gap 0.508) (thermal_bridge_width 0.508))
      (polygon
        (pts
          (xy 42 108.3)
          (xy 39 108.3)
          (xy 39 105.7)
          (xy 42 105.7)
        )
      )
    )
    (zone (net 0) (net_name "") (layer "F.Cu") (tstamp 7b563b97-450d-4cc4-915c-ddcba16d1327) (hatch full 0.508)
      (connect_pads (clearance 0))
      (min_thickness 0.254)
      (keepout (tracks not_allowed) (vias not_allowed) (pads not_allowed ) (copperpour not_allowed) (footprints not_allowed))
      (fill (thermal_gap 0.508) (thermal_bridge_width 0.508))
      (polygon
        (pts
          (xy 47 108.3)
          (xy 44 108.3)
          (xy 44 105.7)
          (xy 47 105.7)
        )
      )
    )
    (model "${KICAD6_3DMODEL_DIR}/Button_Switch_SMD.3dshapes/SW_SPST_SKQG_WithStem.wrl"
      (offset (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (footprint "Resistor_SMD:R_0805_2012Metric" (layer "F.Cu")
    (tedit 5F68FEEE) (tstamp 1a1021d8-58be-4d26-b67f-840f49106075)
    (at 69 92 180)
    (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
    (tags "resistor")
    (property "LCSC" "C17673")
    (property "Sheetfile" "esp8266-arduino-section.kicad_sch")
    (property "Sheetname" "ESP8266")
    (path "/ff3625c2-684b-47d8-96d9-4a80a872bce2/2cdb1cae-decb-4913-bdf6-9663863c3551")
    (attr smd)
    (fp_text reference "R2" (at 0 -1.65) (layer "F.SilkS")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp e4f105bc-211e-404e-b603-9e46f15797b0)
    )
    (fp_text value "4.7k" (at 0 1.65) (layer "F.Fab")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp 2b14a580-ef51-4ae3-a739-b9aca1f9feb5)
    )
    (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab")
      (effects (font (size 0.5 0.5) (thickness 0.08)))
      (tstamp f6f8b8d2-3eb2-4209-b632-122eace3ad5d)
    )
    (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) (layer "F.SilkS") (width 0.12) (tstamp 285b2798-1867-4632-9286-cbbade664d71))
    (fp_line (start -0.227064 0.735) (end 0.227064 0.735) (layer "F.SilkS") (width 0.12) (tstamp 8b8f3d11-0ec0-4dbc-8d83-fa3cd79d7c83))
    (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer "F.CrtYd") (width 0.05) (tstamp 0afecb5d-3aaa-4c12-b41c-ceb8a5820b52))
    (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer "F.CrtYd") (width 0.05) (tstamp 287a03fa-6599-4bb6-9436-308dc4bfe04d))
    (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer "F.CrtYd") (width 0.05) (tstamp d14b5fd7-2715-427d-a618-edf54af659b8))
    (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer "F.CrtYd") (width 0.05) (tstamp d3ab6fae-f122-49ed-bd66-219df2395dbb))
    (fp_line (start -1 0.625) (end -1 -0.625) (layer "F.Fab") (width 0.1) (tstamp 62cdf480-cb19-4dce-8aa4-3c28e7889b60))
    (fp_line (start 1 0.625) (end -1 0.625) (layer "F.Fab") (width 0.1) (tstamp 8b03350a-9a27-4e8b-a7f2-d1c74102e621))
    (fp_line (start -1 -0.625) (end 1 -0.625) (layer "F.Fab") (width 0.1) (tstamp a9c65548-7b10-464f-8c6e-dd54bce38cf7))
    (fp_line (start 1 -0.625) (end 1 0.625) (layer "F.Fab") (width 0.1) (tstamp d6f6ba6d-6c23-4963-b7cd-f1df2516038c))
    (pad "1" smd roundrect (at -0.9125 0 180) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902)
      (net 3 "+3V3") (pintype "passive") (tstamp 25c640ed-1129-40a7-aca2-cafbd94e8c05))
    (pad "2" smd roundrect (at 0.9125 0 180) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902)
      (net 25 "Net-(JP2-Pad2)") (pintype "passive") (tstamp 002867db-8cbd-40c0-951a-7f9f2e18dc80))
    (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl"
      (offset (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (footprint "Diode_SMD:D_SMA" (layer "F.Cu")
    (tedit 586432E5) (tstamp 23011652-5d37-4ed1-be1b-a79cbd2035cb)
    (at 43 87 180)
    (descr "Diode SMA (DO-214AC)")
    (tags "Diode SMA (DO-214AC)")
    (property "LCSC" "C727081")
    (property "Sheetfile" "esp8266-arduino-section.kicad_sch")
    (property "Sheetname" "ESP8266")
    (path "/ff3625c2-684b-47d8-96d9-4a80a872bce2/749e6583-1831-49e0-8ae2-6c5bd1aa6d39")
    (attr smd)
    (fp_text reference "D1" (at 0 -2.5) (layer "F.SilkS")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp 8d0df3cc-6527-43de-a74c-1b5e3e528a16)
    )
    (fp_text value "1N4007" (at 0 2.6) (layer "F.Fab")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp ef3cf04e-682b-44e8-9b07-fc8e4d284ba5)
    )
    (fp_text user "${REFERENCE}" (at 0 -2.5) (layer "F.Fab")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp ba73061a-5fd4-4c08-8c9a-26423d900dd2)
    )
    (fp_line (start -3.4 -1.65) (end -3.4 1.65) (layer "F.SilkS") (width 0.12) (tstamp 2e3273e0-b263-49fb-9faa-91b5ccfdbe11))
    (fp_line (start -3.4 -1.65) (end 2 -1.65) (layer "F.SilkS") (width 0.12) (tstamp c2768b4c-c64f-4ae2-88bb-dc99227d7b5e))
    (fp_line (start -3.4 1.65) (end 2 1.65) (layer "F.SilkS") (width 0.12) (tstamp fc2c3525-557c-4107-8cdc-df77abbb34e1))
    (fp_line (start 3.5 -1.75) (end 3.5 1.75) (layer "F.CrtYd") (width 0.05) (tstamp 327a449b-6aad-4918-8253-1d258d8898ac))
    (fp_line (start 3.5 1.75) (end -3.5 1.75) (layer "F.CrtYd") (width 0.05) (tstamp 41e59a59-9cfc-4edc-aae6-6311702908ce))
    (fp_line (start -3.5 1.75) (end -3.5 -1.75) (layer "F.CrtYd") (width 0.05) (tstamp 98c51d28-f04f-4116-8549-5fcb58c62f43))
    (fp_line (start -3.5 -1.75) (end 3.5 -1.75) (layer "F.CrtYd") (width 0.05) (tstamp c86aa4f0-2ab5-4d61-a038-3a10a6ca89f4))
    (fp_line (start -0.64944 -0.79908) (end -0.64944 0.80112) (layer "F.Fab") (width 0.1) (tstamp 11bbb3ab-ed25-4fea-bf0f-b160bd149bb3))
    (fp_line (start 2.3 -1.5) (end 2.3 1.5) (layer "F.Fab") (width 0.1) (tstamp 1e73fa90-5783-4915-8ee0-38ef7084293f))
    (fp_line (start -0.64944 0.00102) (end 0.50118 0.75032) (layer "F.Fab") (width 0.1) (tstamp 42414514-2c0b-4635-b92a-8efb03c3cd14))
    (fp_line (start 0.50118 0.75032) (end 0.50118 -0.79908) (layer "F.Fab") (width 0.1) (tstamp 5b8cebad-be67-4f60-aae2-a4f8bd4f4185))
    (fp_line (start 2.3 -1.5) (end -2.3 -1.5) (layer "F.Fab") (width 0.1) (tstamp 781a4720-cea6-4d10-ad00-ba99207ea702))
    (fp_line (start 0.50118 0.00102) (end 1.4994 0.00102) (layer "F.Fab") (width 0.1) (tstamp c8a01bd0-068e-4cb1-9e4e-eac2f7ed2853))
    (fp_line (start -2.3 1.5) (end -2.3 -1.5) (layer "F.Fab") (width 0.1) (tstamp d0038cf6-59e4-46e9-a4a9-dd0d8747a6f6))
    (fp_line (start -0.64944 0.00102) (end -1.55114 0.00102) (layer "F.Fab") (width 0.1) (tstamp e2642c45-16b2-4cc1-abb7-5ff4bd580999))
    (fp_line (start -0.64944 0.00102) (end 0.50118 -0.79908) (layer "F.Fab") (width 0.1) (tstamp e8ce70b3-5837-45b3-ace9-98a598191f66))
    (fp_line (start 2.3 1.5) (end -2.3 1.5) (layer "F.Fab") (width 0.1) (tstamp eea635bb-20fe-475c-8c4f-a2beed2ccb61))
    (pad "1" smd rect (at -2 0 180) (size 2.5 1.8) (layers "F.Cu" "F.Paste" "F.Mask")
      (net 1 "+5V") (pinfunction "K") (pintype "passive") (tstamp 3c8d11cd-a0dc-49b8-a4ca-fd1eace7d58c))
    (pad "2" smd rect (at 2 0 180) (size 2.5 1.8) (layers "F.Cu" "F.Paste" "F.Mask")
      (net 3 "+3V3") (pinfunction "A") (pintype "passive") (tstamp e13098af-5169-4cf4-8ef9-11dfabcf02c8))
    (model "${KICAD6_3DMODEL_DIR}/Diode_SMD.3dshapes/D_SMA.wrl"
      (offset (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (footprint "Resistor_SMD:R_0805_2012Metric" (layer "F.Cu")
    (tedit 5F68FEEE) (tstamp 2709ce2a-03e4-434c-9c75-d1901617d39a)
    (at 61 107 -90)
    (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
    (tags "resistor")
    (property "LCSC" "C27834")
    (property "Sheetfile" "esp8266-arduino-section.kicad_sch")
    (property "Sheetname" "ESP8266")
    (path "/ff3625c2-684b-47d8-96d9-4a80a872bce2/34259e17-c810-4ab8-8667-98439db3e6a4")
    (attr smd)
    (fp_text reference "R3" (at 0 -1.65 90) (layer "F.SilkS")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp c76dc00e-1a8b-4a9b-817a-28360bcde3ff)
    )
    (fp_text value "5.1k" (at 0 1.65 90) (layer "F.Fab")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp 84455542-7e2f-4335-a9ba-0df5de00922d)
    )
    (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab")
      (effects (font (size 0.5 0.5) (thickness 0.08)))
      (tstamp 24dc591c-6157-45d9-99a5-13ff4471671a)
    )
    (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) (layer "F.SilkS") (width 0.12) (tstamp 15aaec0c-d08a-459d-a4d6-fdeee1744d72))
    (fp_line (start -0.227064 0.735) (end 0.227064 0.735) (layer "F.SilkS") (width 0.12) (tstamp bfe8be2c-fc6b-433e-b123-999cdbc3dbc8))
    (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer "F.CrtYd") (width 0.05) (tstamp 646cc823-4b23-4276-82fd-3a691833b479))
    (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer "F.CrtYd") (width 0.05) (tstamp c2db052a-9ebe-4555-8329-30d0fd1ecd19))
    (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer "F.CrtYd") (width 0.05) (tstamp c5a570ee-256b-40ce-86c7-297d2a087fa4))
    (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer "F.CrtYd") (width 0.05) (tstamp db01299f-7c12-4782-97d0-1cc2460d3ad3))
    (fp_line (start -1 0.625) (end -1 -0.625) (layer "F.Fab") (width 0.1) (tstamp 0cca53b1-3aa4-48c6-96d4-d7be2e627354))
    (fp_line (start 1 0.625) (end -1 0.625) (layer "F.Fab") (width 0.1) (tstamp 37e48d00-b3eb-4229-93d0-2517d94329f9))
    (fp_line (start -1 -0.625) (end 1 -0.625) (layer "F.Fab") (width 0.1) (tstamp a7ca59c0-d4f6-4d3c-8a4f-dcb50d73fb27))
    (fp_line (start 1 -0.625) (end 1 0.625) (layer "F.Fab") (width 0.1) (tstamp d5b00e2b-1f78-44ec-bd78-0596bc5d8875))
    (pad "1" smd roundrect (at -0.9125 0 270) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902)
      (net 18 "Net-(J5-PadA5)") (pintype "passive") (tstamp f8395c4b-6979-4f46-88e7-891bcc99e918))
    (pad "2" smd roundrect (at 0.9125 0 270) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902)
      (net 2 "GND") (pintype "passive") (tstamp 15c2c293-19f3-431e-a4f8-998d284137b1))
    (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl"
      (offset (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (footprint "Resistor_SMD:R_0805_2012Metric" (layer "F.Cu")
    (tedit 5F68FEEE) (tstamp 27d20039-db05-43e0-8ec4-cb1501c26a3e)
    (at 61 89 90)
    (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
    (tags "resistor")
    (property "LCSC" "C17444")
    (property "Sheetfile" "esp8266-arduino-section.kicad_sch")
    (property "Sheetname" "ESP8266")
    (path "/ff3625c2-684b-47d8-96d9-4a80a872bce2/4312ae33-ab1e-4050-ad6b-10967ac5ac2f")
    (attr smd)
    (fp_text reference "R7" (at 0 -1.65 90) (layer "F.SilkS")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp fa005a1d-8244-4025-996a-39492e801f53)
    )
    (fp_text value "12k" (at 0 1.65 90) (layer "F.Fab")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp 71d792d8-b8b3-47b7-a204-09c5a4bc483c)
    )
    (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab")
      (effects (font (size 0.5 0.5) (thickness 0.08)))
      (tstamp a1fafe96-bf43-4a76-a5cc-404722bc5d1b)
    )
    (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) (layer "F.SilkS") (width 0.12) (tstamp 6de8d81c-96ad-4501-9d37-071513ebf167))
    (fp_line (start -0.227064 0.735) (end 0.227064 0.735) (layer "F.SilkS") (width 0.12) (tstamp e020020a-70d6-4391-a24e-8f69fabea557))
    (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer "F.CrtYd") (width 0.05) (tstamp 1435db07-7c04-4f6d-9a40-1d1cc6be750f))
    (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer "F.CrtYd") (width 0.05) (tstamp 927976be-c402-4b5c-a830-d25e362b11a6))
    (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer "F.CrtYd") (width 0.05) (tstamp 96c15667-03fe-4f24-9ccf-19b7cb51e7c0))
    (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer "F.CrtYd") (width 0.05) (tstamp acbc95ef-9aa5-4486-8db0-5db0bcc3054b))
    (fp_line (start 1 0.625) (end -1 0.625) (layer "F.Fab") (width 0.1) (tstamp 319b8470-31b3-4006-9fe0-5a51e3916da2))
    (fp_line (start -1 -0.625) (end 1 -0.625) (layer "F.Fab") (width 0.1) (tstamp 3b79d3ac-a8e9-41fb-a223-dbbf64bbb270))
    (fp_line (start -1 0.625) (end -1 -0.625) (layer "F.Fab") (width 0.1) (tstamp 591fd355-4e27-4731-aa0f-02f77cce2f9e))
    (fp_line (start 1 -0.625) (end 1 0.625) (layer "F.Fab") (width 0.1) (tstamp 59ba7051-3b07-4922-89a2-c727ad19c365))
    (pad "1" smd roundrect (at -0.9125 0 90) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902)
      (net 3 "+3V3") (pintype "passive") (tstamp 5ec7bfd7-d993-426f-89b3-0341499ce730))
    (pad "2" smd roundrect (at 0.9125 0 90) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902)
      (net 15 "/ESP8266/GPIO0") (pintype "passive") (tstamp 980fee06-98e5-41f3-a305-cab8f421e9e5))
    (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl"
      (offset (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (footprint "Resistor_SMD:R_0805_2012Metric" (layer "F.Cu")
    (tedit 5F68FEEE) (tstamp 35bd06d1-6d5e-41e2-9954-4a8999f790cc)
    (at 64 89 90)
    (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
    (tags "resistor")
    (property "LCSC" "C17444")
    (property "Sheetfile" "esp8266-arduino-section.kicad_sch")
    (property "Sheetname" "ESP8266")
    (path "/ff3625c2-684b-47d8-96d9-4a80a872bce2/9e1a8d88-aff7-4e9e-afa4-4e1418a8b6d4")
    (attr smd)
    (fp_text reference "R8" (at 0 -1.65 90) (layer "F.SilkS")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp ad3aa0c3-9ac7-4d81-ad80-b35e14121082)
    )
    (fp_text value "12k" (at 0 1.65 90) (layer "F.Fab")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp 5b3f1965-83a8-4614-b9f9-bdd37f9d3073)
    )
    (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab")
      (effects (font (size 0.5 0.5) (thickness 0.08)))
      (tstamp cb454bba-21bb-411e-acd7-874a5ffb2a20)
    )
    (fp_line (start -0.227064 0.735) (end 0.227064 0.735) (layer "F.SilkS") (width 0.12) (tstamp 2e855e7d-ae5d-4843-b6f8-a64676b33426))
    (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) (layer "F.SilkS") (width 0.12) (tstamp 57bccd3b-dc6b-4280-9806-bec6fabe0994))
    (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer "F.CrtYd") (width 0.05) (tstamp 28f05dc0-a7df-4d9a-810c-26ae56c54494))
    (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer "F.CrtYd") (width 0.05) (tstamp 3b2352f3-f4a6-43d4-bf13-253d8dc29b84))
    (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer "F.CrtYd") (width 0.05) (tstamp 68bb9a10-9c7a-4a66-8a91-6c0516e93fa7))
    (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer "F.CrtYd") (width 0.05) (tstamp e359e3f3-8d00-4c35-848d-35da7412b622))
    (fp_line (start -1 -0.625) (end 1 -0.625) (layer "F.Fab") (width 0.1) (tstamp 073719a6-4c9f-4603-8e5c-c50161fbd4fe))
    (fp_line (start 1 0.625) (end -1 0.625) (layer "F.Fab") (width 0.1) (tstamp 0a91f21b-a4d3-4238-8dbb-061e2aed0e86))
    (fp_line (start 1 -0.625) (end 1 0.625) (layer "F.Fab") (width 0.1) (tstamp 9f1e7a2a-e139-44f9-9772-6984e55da5f8))
    (fp_line (start -1 0.625) (end -1 -0.625) (layer "F.Fab") (width 0.1) (tstamp b625ee33-fbea-4948-bc17-13d273730f1e))
    (pad "1" smd roundrect (at -0.9125 0 90) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902)
      (net 3 "+3V3") (pintype "passive") (tstamp 1ca1632a-6610-415b-b0dc-5f44d3fe84c0))
    (pad "2" smd roundrect (at 0.9125 0 90) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902)
      (net 14 "/ESP8266/GPIO2") (pintype "passive") (tstamp dc5ddb00-d6c5-44eb-9645-33924a92aace))
    (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl"
      (offset (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (footprint "Resistor_SMD:R_0805_2012Metric" (layer "F.Cu")
    (tedit 5F68FEEE) (tstamp 36bff586-eca3-4afd-b986-3ed95f84ca00)
    (at 69 94 180)
    (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
    (tags "resistor")
    (property "LCSC" "C17673")
    (property "Sheetfile" "esp8266-arduino-section.kicad_sch")
    (property "Sheetname" "ESP8266")
    (path "/ff3625c2-684b-47d8-96d9-4a80a872bce2/c41b50fb-54dc-4520-b6bb-a3f20cdfc149")
    (attr smd)
    (fp_text reference "R1" (at 0 -1.65) (layer "F.SilkS")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp 6cd00d4f-61c2-4050-a734-fbbc9b332ac5)
    )
    (fp_text value "4.7k" (at 0 1.65) (layer "F.Fab")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp be1d4860-6104-4846-8f85-cb9eeb1d3852)
    )
    (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab")
      (effects (font (size 0.5 0.5) (thickness 0.08)))
      (tstamp 0b164fde-4117-4f4b-b33c-90ef4e14a2d7)
    )
    (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) (layer "F.SilkS") (width 0.12) (tstamp 686f01ff-61f4-4d40-93ac-68b31f1bd25e))
    (fp_line (start -0.227064 0.735) (end 0.227064 0.735) (layer "F.SilkS") (width 0.12) (tstamp 75d7814f-683f-4288-8fed-8be8b7aa78e8))
    (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer "F.CrtYd") (width 0.05) (tstamp 32d0dec4-849a-4ad3-98bf-c3d09bde19e3))
    (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer "F.CrtYd") (width 0.05) (tstamp 7c6862df-9466-45f1-9381-f3657ea4b3e8))
    (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer "F.CrtYd") (width 0.05) (tstamp c7d85444-438c-43fc-a16f-2284ce271266))
    (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer "F.CrtYd") (width 0.05) (tstamp fea15bc1-4971-4a84-92e6-c32586448a6d))
    (fp_line (start 1 0.625) (end -1 0.625) (layer "F.Fab") (width 0.1) (tstamp 20a2e9dd-2402-40b7-add8-b842e5ad627d))
    (fp_line (start -1 -0.625) (end 1 -0.625) (layer "F.Fab") (width 0.1) (tstamp 4ce705f2-f33f-4b58-bb0a-18a8a104b9e7))
    (fp_line (start -1 0.625) (end -1 -0.625) (layer "F.Fab") (width 0.1) (tstamp 60ce91f0-c544-43e7-8e38-bf10e4667798))
    (fp_line (start 1 -0.625) (end 1 0.625) (layer "F.Fab") (width 0.1) (tstamp acd04a5b-ee1f-40ee-9e2c-b0fdbec90405))
    (pad "1" smd roundrect (at -0.9125 0 180) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902)
      (net 3 "+3V3") (pintype "passive") (tstamp 2676c483-f7c7-421a-8aa6-6bd4ae81c034))
    (pad "2" smd roundrect (at 0.9125 0 180) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902)
      (net 24 "Net-(JP1-Pad2)") (pintype "passive") (tstamp 935ff92d-1e61-4cb8-a74b-58c0fa519d51))
    (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl"
      (offset (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (footprint "Capacitor_SMD:C_0603_1608Metric" (layer "F.Cu")
    (tedit 5F68FEEE) (tstamp 4928bef9-7e3f-4bd4-8e9a-319f23ca5dc8)
    (at 48 101 -90)
    (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
    (tags "capacitor")
    (property "LCSC" "C19666")
    (property "PN" "FG28X5R1E475KRT06")
    (property "Sheetfile" "esp8266-arduino-section.kicad_sch")
    (property "Sheetname" "ESP8266")
    (path "/ff3625c2-684b-47d8-96d9-4a80a872bce2/b934c745-ca95-4ca9-b389-7c58af99eeca")
    (attr smd)
    (fp_text reference "C1" (at 0 -1.43 90) (layer "F.SilkS")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp 3c8ed3f4-df00-4045-95ee-06a038f27407)
    )
    (fp_text value "4.7uF" (at 0 1.43 90) (layer "F.Fab")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp 6196b48f-3e4d-48d5-abba-0bc507041a88)
    )
    (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab")
      (effects (font (size 0.4 0.4) (thickness 0.06)))
      (tstamp ac2d7347-d054-4357-a487-948836c4b634)
    )
    (fp_line (start -0.14058 0.51) (end 0.14058 0.51) (layer "F.SilkS") (width 0.12) (tstamp 7321fc1d-4bf4-4722-b771-3dea58908c97))
    (fp_line (start -0.14058 -0.51) (end 0.14058 -0.51) (layer "F.SilkS") (width 0.12) (tstamp ec8d835a-bf1e-4035-be04-91802453a8e4))
    (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer "F.CrtYd") (width 0.05) (tstamp a5e66907-97f6-494a-ba96-62895ca062a8))
    (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer "F.CrtYd") (width 0.05) (tstamp af6362bd-a115-4797-b73c-2e4a7ef5010f))
    (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer "F.CrtYd") (width 0.05) (tstamp e6c797e2-4525-42fb-9390-6d59d43cce2e))
    (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer "F.CrtYd") (width 0.05) (tstamp ee48b3ea-2ea0-4031-bbe2-e3ad11d1f998))
    (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer "F.Fab") (width 0.1) (tstamp 37bf1faf-f401-4482-8db7-b8ef61ebd827))
    (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp 4aaedbc0-abfa-42c6-b471-b58d849b7ce8))
    (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp 9c050cb2-33aa-4c20-9e55-adbf0da0e58a))
    (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer "F.Fab") (width 0.1) (tstamp e5f41159-2bff-44c2-af46-7ef1588347c3))
    (pad "1" smd roundrect (at -0.775 0 270) (size 0.9 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25)
      (net 1 "+5V") (pintype "passive") (tstamp 00317f5a-ceb8-4ac6-9be9-c38f0c5a6b2e))
    (pad "2" smd roundrect (at 0.775 0 270) (size 0.9 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25)
      (net 2 "GND") (pintype "passive") (tstamp 2908f2a3-40a2-4e7f-8b7c-6064079be2eb))
    (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl"
      (offset (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (footprint "Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical" (layer "F.Cu")
    (tedit 5A19A420) (tstamp 4a0afd40-4b48-4d8b-a847-629c884aeb1a)
    (at 67.975 82.875 180)
    (descr "Through hole straight socket strip, 1x08, 2.54mm pitch, single row (from Kicad 4.0.7), script generated")
    (tags "Through hole socket strip THT 1x08 2.54mm single row")
    (property "Sheetfile" "esp8266-arduino-section.kicad_sch")
    (property "Sheetname" "ESP8266")
    (path "/ff3625c2-684b-47d8-96d9-4a80a872bce2/e81459a6-10a6-4e39-aafa-e642a5b16f33")
    (attr through_hole)
    (fp_text reference "J4" (at 0 -2.77) (layer "F.SilkS")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp 4c0638b9-94d7-43e2-b2b4-f9be63a580b6)
    )
    (fp_text value "D1_conn" (at 0 20.55) (layer "F.Fab")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp 564880a2-38ad-4e1d-a994-3dfba276d2e5)
    )
    (fp_text user "${REFERENCE}" (at 0 8.89 90) (layer "F.Fab")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp 919693ed-886b-47f8-8d40-e7a84dcce4af)
    )
    (fp_line (start 1.33 1.27) (end 1.33 19.11) (layer "F.SilkS") (width 0.12) (tstamp 366377f0-a55b-44a1-a28b-40d54f0e0078))
    (fp_line (start -1.33 1.27) (end 1.33 1.27) (layer "F.SilkS") (width 0.12) (tstamp 5bb4f220-fec6-4075-97ae-d01e9e5ee125))
    (fp_line (start -1.33 1.27) (end -1.33 19.11) (layer "F.SilkS") (width 0.12) (tstamp 7afd0d29-e94d-4bc3-aa13-9ad59224592d))
    (fp_line (start -1.33 19.11) (end 1.33 19.11) (layer "F.SilkS") (width 0.12) (tstamp a3f615cd-70fc-411f-b70d-5482ccf6b0e3))
    (fp_line (start 1.33 -1.33) (end 1.33 0) (layer "F.SilkS") (width 0.12) (tstamp a61c87a2-6a3a-41c2-b538-ef2dd614e6b1))
    (fp_line (start 0 -1.33) (end 1.33 -1.33) (layer "F.SilkS") (width 0.12) (tstamp f728c545-f556-4d42-aa70-03954a1ca0b4))
    (fp_line (start 1.75 -1.8) (end 1.75 19.55) (layer "F.CrtYd") (width 0.05) (tstamp 1116546a-6706-4b20-977f-e726b5fe8b41))
    (fp_line (start -1.8 19.55) (end -1.8 -1.8) (layer "F.CrtYd") (width 0.05) (tstamp 1b68617a-479b-443e-9aee-ea0249a3795d))
    (fp_line (start -1.8 -1.8) (end 1.75 -1.8) (layer "F.CrtYd") (width 0.05) (tstamp 3c4e6d3f-3096-42e4-83f1-852d01236ac6))
    (fp_line (start 1.75 19.55) (end -1.8 19.55) (layer "F.CrtYd") (width 0.05) (tstamp 77f592ae-ccd8-45fe-8667-b61335e40d7d))
    (fp_line (start -1.27 -1.27) (end 0.635 -1.27) (layer "F.Fab") (width 0.1) (tstamp 92cad9ff-1f93-4495-99b6-07357702e01d))
    (fp_line (start 1.27 19.05) (end -1.27 19.05) (layer "F.Fab") (width 0.1) (tstamp ba13b444-1236-40db-bf7a-4f028d480b98))
    (fp_line (start -1.27 19.05) (end -1.27 -1.27) (layer "F.Fab") (width 0.1) (tstamp db7e0428-a216-4c04-970d-751d88c2ecde))
    (fp_line (start 1.27 -0.635) (end 1.27 19.05) (layer "F.Fab") (width 0.1) (tstamp f3fe3c43-b011-42ae-a545-32e35f0f1682))
    (fp_line (start 0.635 -1.27) (end 1.27 -0.635) (layer "F.Fab") (width 0.1) (tstamp f937ab2c-ee1e-4c93-bd64-3e62fef7a250))
    (pad "1" thru_hole rect (at 0 0 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 1 "+5V") (pinfunction "Pin_1") (pintype "passive") (tstamp 020691ec-cdec-4ed6-8249-0c2d1f9fd508))
    (pad "2" thru_hole oval (at 0 2.54 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 2 "GND") (pinfunction "Pin_2") (pintype "passive") (tstamp 72935fa1-a95c-4be8-a976-805110a33dfb))
    (pad "3" thru_hole oval (at 0 5.08 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 14 "/ESP8266/GPIO2") (pinfunction "Pin_3") (pintype "passive") (tstamp 6859ff61-b027-4c10-a34f-20c0c9f44cd3))
    (pad "4" thru_hole oval (at 0 7.62 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 15 "/ESP8266/GPIO0") (pinfunction "Pin_4") (pintype "passive") (tstamp 6ef9d017-aefa-47b2-b350-b20c3d4e6d8e))
    (pad "5" thru_hole oval (at 0 10.16 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 12 "/ESP8266/GPIO4{slash}SDA") (pinfunction "Pin_5") (pintype "passive") (tstamp fc758181-8cc6-480e-b28f-37356ff3b4ae))
    (pad "6" thru_hole oval (at 0 12.7 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 13 "/ESP8266/GPIO5{slash}SCL") (pinfunction "Pin_6") (pintype "passive") (tstamp c063ef3b-fa13-4511-adff-a2272ee634b5))
    (pad "7" thru_hole oval (at 0 15.24 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 16 "/ESP8266/RX") (pinfunction "Pin_7") (pintype "passive") (tstamp fb88df68-71ee-492b-b016-30ea95b8d199))
    (pad "8" thru_hole oval (at 0 17.78 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 17 "/ESP8266/TX") (pinfunction "Pin_8") (pintype "passive") (tstamp 49ae11da-8d4a-4ea7-86f6-559f086c5c99))
    (model "${KICAD6_3DMODEL_DIR}/Connector_PinSocket_2.54mm.3dshapes/PinSocket_1x08_P2.54mm_Vertical.wrl"
      (offset (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (footprint "Connector_JST:JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical" (layer "F.Cu")
    (tedit 5B78AD87) (tstamp 4e745645-fc46-4d0b-a52f-9dc65436adb9)
    (at 71 100 -90)
    (descr "JST SH series connector, BM04B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator")
    (tags "connector JST SH side entry")
    (property "LCSC" "C145956")
    (property "Sheetfile" "esp8266-arduino-section.kicad_sch")
    (property "Sheetname" "ESP8266")
    (path "/ff3625c2-684b-47d8-96d9-4a80a872bce2/943968b4-773f-4ac8-9c92-4911c32acd10")
    (attr smd)
    (fp_text reference "J2" (at 0 -3.3 90) (layer "F.SilkS")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp 133aab5b-80c5-4a8f-be2a-847f8349f632)
    )
    (fp_text value "JST SH-1x4" (at 0 3.3 90) (layer "F.Fab")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp 7b80ce58-9dd3-418e-afd9-85e741967bd9)
    )
    (fp_text user "${REFERENCE}" (at 0 -0.25 90) (layer "F.Fab")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp 5c698e33-c953-4af4-9879-cc5bbaf2e6b9)
    )
    (fp_line (start 3.11 -0.04) (end 3.11 1.11) (layer "F.SilkS") (width 0.12) (tstamp 2a1e0baf-e38e-461e-824a-434046f09960))
    (fp_line (start -1.94 -2.01) (end 1.94 -2.01) (layer "F.SilkS") (width 0.12) (tstamp 64d90409-1a21-4d40-aabc-077b886e6274))
    (fp_line (start -2.06 1.11) (end -2.06 2.1) (layer "F.SilkS") (width 0.12) (tstamp 7a1c9b1c-880f-4c35-b974-a969c02fa8d3))
    (fp_line (start 3.11 1.11) (end 2.06 1.11) (layer "F.SilkS") (width 0.12) (tstamp 95e2fbe3-d65a-41df-8fb2-1d4c6d4bae47))
    (fp_line (start -3.11 1.11) (end -2.06 1.11) (layer "F.SilkS") (width 0.12) (tstamp c0ff6fea-62e7-468e-8b98-6a530df89a15))
    (fp_line (start -3.11 -0.04) (end -3.11 1.11) (layer "F.SilkS") (width 0.12) (tstamp fc91807e-4912-4b87-b6ce-0e923a017b67))
    (fp_line (start -3.9 2.6) (end 3.9 2.6) (layer "F.CrtYd") (width 0.05) (tstamp 5bdf2175-bc78-4d8d-97b8-94609e89b1c3))
    (fp_line (start 3.9 -2.6) (end -3.9 -2.6) (layer "F.CrtYd") (width 0.05) (tstamp 8c6836d5-6a26-492b-8b45-7c3c093e3b71))
    (fp_line (start 3.9 2.6) (end 3.9 -2.6) (layer "F.CrtYd") (width 0.05) (tstamp a6892391-e794-42ae-bd0e-0602e6fc0bc5))
    (fp_line (start -3.9 -2.6) (end -3.9 2.6) (layer "F.CrtYd") (width 0.05) (tstamp b5061ce6-9f44-4f3e-a8f7-138678c5bec3))
    (fp_line (start -3 1) (end -3 -1.9) (layer "F.Fab") (width 0.1) (tstamp 28e4d25e-dd78-4f7c-ae62-6105622cf49a))
    (fp_line (start -3 1) (end 3 1) (layer "F.Fab") (width 0.1) (tstamp 312ac267-318d-41b4-84d8-d98b54e134d4))
    (fp_line (start 0.65 -1.55) (end 0.35 -1.55) (layer "F.Fab") (width 0.1) (tstamp 3637202c-aebb-48f1-b690-f6ea6958e81c))
    (fp_line (start -3 -1.9) (end 3 -1.9) (layer "F.Fab") (width 0.1) (tstamp 37cd233f-1e28-4300-929b-fc81a012d8ec))
    (fp_line (start -1.35 -1.55) (end -1.65 -1.55) (layer "F.Fab") (width 0.1) (tstamp 415b0eb1-accc-44a8-8b99-b3db5101b931))
    (fp_line (start -0.35 -0.95) (end -0.35 -1.55) (layer "F.Fab") (width 0.1) (tstamp 4b799b12-bac7-4d3b-bb9f-795f68ad23af))
    (fp_line (start -1.35 -0.95) (end -1.35 -1.55) (layer "F.Fab") (width 0.1) (tstamp 5f98f70e-ffd0-4082-8429-706e870aabe9))
    (fp_line (start 0.35 -1.55) (end 0.35 -0.95) (layer "F.Fab") (width 0.1) (tstamp 7ba511d9-abfe-4218-959b-c89379f9682c))
    (fp_line (start -2 1) (end -1.5 0.292893) (layer "F.Fab") (width 0.1) (tstamp 7c646663-d855-46dd-a9cf-0ef27a64e8cf))
    (fp_line (start 0.35 -0.95) (end 0.65 -0.95) (layer "F.Fab") (width 0.1) (tstamp 84a31686-5bf1-442f-a1e0-ccef8696e152))
    (fp_line (start -1.65 -1.55) (end -1.65 -0.95) (layer "F.Fab") (width 0.1) (tstamp 98438490-7b9d-4527-ab0c-80b40fa9c86b))
    (fp_line (start -1.65 -0.95) (end -1.35 -0.95) (layer "F.Fab") (width 0.1) (tstamp bdb5561c-fe20-423d-b7d5-a0d0badc0382))
    (fp_line (start -0.35 -1.55) (end -0.65 -1.55) (layer "F.Fab") (width 0.1) (tstamp c5c639d5-d33a-45a5-a5c3-e10905cdf215))
    (fp_line (start 0.65 -0.95) (end 0.65 -1.55) (layer "F.Fab") (width 0.1) (tstamp c74eb86d-1368-4af3-90c6-1ecb8d453f52))
    (fp_line (start 1.65 -1.55) (end 1.35 -1.55) (layer "F.Fab") (width 0.1) (tstamp ca735b40-55b0-4c5e-a0ff-d5bf94d15333))
    (fp_line (start 3 1) (end 3 -1.9) (layer "F.Fab") (width 0.1) (tstamp ce6f37be-489f-4f87-9857-25d57e2813c1))
    (fp_line (start 1.65 -0.95) (end 1.65 -1.55) (layer "F.Fab") (width 0.1) (tstamp d14ad162-bed1-490d-9ce7-9b945eaf9521))
    (fp_line (start -0.65 -0.95) (end -0.35 -0.95) (layer "F.Fab") (width 0.1) (tstamp dc9652fb-5627-446a-a305-fdbb26de4b04))
    (fp_line (start -1.5 0.292893) (end -1 1) (layer "F.Fab") (width 0.1) (tstamp ebf5b1d8-f6be-4ebd-8d37-017f06517d7d))
    (fp_line (start 1.35 -1.55) (end 1.35 -0.95) (layer "F.Fab") (width 0.1) (tstamp f41b1103-52d8-4460-a4c3-d36f3fc18114))
    (fp_line (start -0.65 -1.55) (end -0.65 -0.95) (layer "F.Fab") (width 0.1) (tstamp f9bf58d7-ca77-4370-b30c-e3b343019cf6))
    (fp_line (start 1.35 -0.95) (end 1.65 -0.95) (layer "F.Fab") (width 0.1) (tstamp f9f634a7-307d-4e1d-97d3-1e66df287590))
    (pad "1" smd roundrect (at -1.5 1.325 270) (size 0.6 1.55) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25)
      (net 2 "GND") (pinfunction "Pin_1") (pintype "passive") (tstamp 480b4d2e-294e-4f68-a564-904457f39942))
    (pad "2" smd roundrect (at -0.5 1.325 270) (size 0.6 1.55) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25)
      (net 3 "+3V3") (pinfunction "Pin_2") (pintype "passive") (tstamp 481df0f8-b85c-4da0-9137-7e513474662e))
    (pad "3" smd roundrect (at 0.5 1.325 270) (size 0.6 1.55) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25)
      (net 12 "/ESP8266/GPIO4{slash}SDA") (pinfunction "Pin_3") (pintype "passive") (tstamp 11b9a63b-4784-42b8-9281-6c920537138d))
    (pad "4" smd roundrect (at 1.5 1.325 270) (size 0.6 1.55) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25)
      (net 13 "/ESP8266/GPIO5{slash}SCL") (pinfunction "Pin_4") (pintype "passive") (tstamp 683724b8-6de4-49bc-af65-243c77ce2048))
    (pad "MP" smd roundrect (at -2.8 -1.2 270) (size 1.2 1.8) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.208333)
      (net 42 "unconnected-(J2-PadMP)") (pinfunction "MP") (pintype "passive+no_connect") (tstamp 85b09595-bf05-482e-88e6-ec7fe7df3b2a))
    (pad "MP" smd roundrect (at 2.8 -1.2 270) (size 1.2 1.8) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.208333)
      (net 42 "unconnected-(J2-PadMP)") (pinfunction "MP") (pintype "passive+no_connect") (tstamp f9891247-8f29-4df8-8903-5aaa03c568e6))
    (model "${KICAD6_3DMODEL_DIR}/Connector_JST.3dshapes/JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical.wrl"
      (offset (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (footprint "Resistor_SMD:R_0805_2012Metric" (layer "F.Cu")
    (tedit 5F68FEEE) (tstamp 5b9664ad-e079-4e5f-8005-7de806b74d05)
    (at 64 107 -90)
    (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
    (tags "resistor")
    (property "LCSC" "C27834")
    (property "Sheetfile" "esp8266-arduino-section.kicad_sch")
    (property "Sheetname" "ESP8266")
    (path "/ff3625c2-684b-47d8-96d9-4a80a872bce2/20649100-517d-41b8-a874-f917b34509a5")
    (attr smd)
    (fp_text reference "R4" (at 0 -1.65 90) (layer "F.SilkS")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp c5c49cd4-5511-4b73-bad2-02dbb711334d)
    )
    (fp_text value "5.1k" (at 0 1.65 90) (layer "F.Fab")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp 1cbc75ad-0602-45e5-a982-f39546075ae3)
    )
    (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab")
      (effects (font (size 0.5 0.5) (thickness 0.08)))
      (tstamp 32d5b6b7-626b-4bdf-b510-041adfaef36c)
    )
    (fp_line (start -0.227064 0.735) (end 0.227064 0.735) (layer "F.SilkS") (width 0.12) (tstamp 0e0dfb03-011a-4ba3-b5f9-6005762a38fb))
    (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) (layer "F.SilkS") (width 0.12) (tstamp cfed4b9e-4a79-4025-9835-cd2ed11be40a))
    (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer "F.CrtYd") (width 0.05) (tstamp 4fced27b-1c33-4c75-991b-deb9bc23309e))
    (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer "F.CrtYd") (width 0.05) (tstamp 66a0fd07-8324-457c-8fc1-c19543f3cec6))
    (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer "F.CrtYd") (width 0.05) (tstamp bf603b2e-cc9a-4f77-a4af-34cf5de969ea))
    (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer "F.CrtYd") (width 0.05) (tstamp cee7f3de-0e55-482d-9896-da883f66148a))
    (fp_line (start 1 0.625) (end -1 0.625) (layer "F.Fab") (width 0.1) (tstamp 40eaff6c-653d-42ee-b221-75349f562e91))
    (fp_line (start 1 -0.625) (end 1 0.625) (layer "F.Fab") (width 0.1) (tstamp 4f9db6dd-ee57-47f5-afdc-850d55d11f83))
    (fp_line (start -1 -0.625) (end 1 -0.625) (layer "F.Fab") (width 0.1) (tstamp 6f42057a-f031-40e2-9142-9dd5644d54b0))
    (fp_line (start -1 0.625) (end -1 -0.625) (layer "F.Fab") (width 0.1) (tstamp 761d6704-e49f-4dca-9445-4d5d1f5dff6d))
    (pad "1" smd roundrect (at -0.9125 0 270) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902)
      (net 22 "Net-(J5-PadB5)") (pintype "passive") (tstamp 3409ff77-6ba7-4502-9966-0e6290fba3d7))
    (pad "2" smd roundrect (at 0.9125 0 270) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902)
      (net 2 "GND") (pintype "passive") (tstamp e64c4636-bd2e-4d2c-9fcc-30dec396d243))
    (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl"
      (offset (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (footprint "Capacitor_SMD:C_0603_1608Metric" (layer "F.Cu")
    (tedit 5F68FEEE) (tstamp 6adad112-6cef-4fde-8e63-1c35b108aec2)
    (at 48 96 -90)
    (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
    (tags "capacitor")
    (property "LCSC" "C19666")
    (property "PN" "FG28X5R1E475KRT06")
    (property "Sheetfile" "esp8266-arduino-section.kicad_sch")
    (property "Sheetname" "ESP8266")
    (path "/ff3625c2-684b-47d8-96d9-4a80a872bce2/def12ece-9e31-4dcc-b1bb-c01720b27f12")
    (attr smd)
    (fp_text reference "C2" (at 0 -1.43 90) (layer "F.SilkS")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp 03f0a393-5440-4ece-89b1-e649e6530bc5)
    )
    (fp_text value "4.7uF" (at 0 1.43 90) (layer "F.Fab")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp ff76a133-5607-4482-896b-2ade5eb58cd2)
    )
    (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab")
      (effects (font (size 0.4 0.4) (thickness 0.06)))
      (tstamp f531715c-9c58-4f77-889a-4ab6e7d42d60)
    )
    (fp_line (start -0.14058 0.51) (end 0.14058 0.51) (layer "F.SilkS") (width 0.12) (tstamp 56fe6238-539c-48ee-8a08-18deb5da3da0))
    (fp_line (start -0.14058 -0.51) (end 0.14058 -0.51) (layer "F.SilkS") (width 0.12) (tstamp 686d66a0-93d7-4bdd-911b-a95cc78b7dd6))
    (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer "F.CrtYd") (width 0.05) (tstamp 6c6e943f-41a2-47de-aea3-764ba0fe968c))
    (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer "F.CrtYd") (width 0.05) (tstamp 748b9a7b-22c7-4ffa-8989-ccd781f4f7cb))
    (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer "F.CrtYd") (width 0.05) (tstamp 7cfb7f9b-da6b-447d-b9f4-ca0aa98d5d87))
    (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer "F.CrtYd") (width 0.05) (tstamp ebe11df8-b53d-43d5-9dfd-b8d315f81f1a))
    (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp 328f330e-def5-4c85-95b1-2f751c2a8abe))
    (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer "F.Fab") (width 0.1) (tstamp 659070dc-473b-4d3e-931a-c0d0db18d414))
    (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer "F.Fab") (width 0.1) (tstamp 8c3ac095-37f8-40f5-b520-0576fc4a7d44))
    (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp d911dc70-e237-40ac-856c-e3523134108c))
    (pad "1" smd roundrect (at -0.775 0 270) (size 0.9 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25)
      (net 3 "+3V3") (pintype "passive") (tstamp 05ffb707-9caf-413a-95e1-86a24f67a6c2))
    (pad "2" smd roundrect (at 0.775 0 270) (size 0.9 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25)
      (net 2 "GND") (pintype "passive") (tstamp 3f0517fb-167d-4128-90a9-07fbe50b5135))
    (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl"
      (offset (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (footprint "Capacitor_SMD:C_0603_1608Metric" (layer "F.Cu")
    (tedit 5F68FEEE) (tstamp 6e10cd54-1430-4755-aebc-76f819a07ea7)
    (at 44 74 90)
    (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
    (tags "capacitor")
    (property "LCSC" "C14663")
    (property "PN" "FG28X5R1E475KRT06")
    (property "Sheetfile" "esp8266-arduino-section.kicad_sch")
    (property "Sheetname" "ESP8266")
    (path "/ff3625c2-684b-47d8-96d9-4a80a872bce2/67b41736-1b6a-40c6-8d64-6cf6a0796bc3")
    (attr smd)
    (fp_text reference "C5" (at 0 -1.43 90) (layer "F.SilkS")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp ae573a56-9c0f-489f-8484-8c7516fd9671)
    )
    (fp_text value "100nF" (at 0 1.43 90) (layer "F.Fab")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp cddddbdf-53bf-4e1e-9c06-96a6794e32ac)
    )
    (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab")
      (effects (font (size 0.4 0.4) (thickness 0.06)))
      (tstamp bee9dc31-309f-4766-a922-9a6fa15816a6)
    )
    (fp_line (start -0.14058 -0.51) (end 0.14058 -0.51) (layer "F.SilkS") (width 0.12) (tstamp 4c01ecbb-7e12-46df-a690-757b3eed621d))
    (fp_line (start -0.14058 0.51) (end 0.14058 0.51) (layer "F.SilkS") (width 0.12) (tstamp b0472632-212a-4bba-9cee-b749d01a0f31))
    (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer "F.CrtYd") (width 0.05) (tstamp 825974d8-e113-40ca-9bbc-7b9d496944a5))
    (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer "F.CrtYd") (width 0.05) (tstamp b55f36ad-7243-4207-a2fd-cc83471436d2))
    (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer "F.CrtYd") (width 0.05) (tstamp b8579289-ee0a-42e1-8063-c568be1c4da6))
    (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer "F.CrtYd") (width 0.05) (tstamp fb45c572-ed2b-4fc0-8830-279b73958394))
    (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp 168aa515-a9d8-4adf-a3c3-d7cd0e57f620))
    (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer "F.Fab") (width 0.1) (tstamp 47f2e04a-09f3-401a-b0fc-04f65698f0c9))
    (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer "F.Fab") (width 0.1) (tstamp 834367d1-00e4-4f1c-a6ce-113ea5671f51))
    (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp 8d5168b9-9ae3-43c1-88ee-e8b00133a926))
    (pad "1" smd roundrect (at -0.775 0 90) (size 0.9 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25)
      (net 2 "GND") (pintype "passive") (tstamp 5d1da45b-1ed5-485e-ab9a-1e3e5c1f8ade))
    (pad "2" smd roundrect (at 0.775 0 90) (size 0.9 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25)
      (net 4 "/ESP8266/EN") (pintype "passive") (tstamp 5d3abf87-0a1f-4096-bcb8-39a0ab3709d1))
    (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl"
      (offset (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (footprint "Package_SO:SOIC-16_3.9x9.9mm_P1.27mm" (layer "F.Cu")
    (tedit 5D9F72B1) (tstamp 77a083d5-904b-4dec-a1ce-d19ca39dd387)
    (at 55 97 90)
    (descr "SOIC, 16 Pin (JEDEC MS-012AC, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/soic_narrow-r/r_16.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py")
    (tags "SOIC SO")
    (property "LCSC" "C84681")
    (property "Sheetfile" "esp8266-arduino-section.kicad_sch")
    (property "Sheetname" "ESP8266")
    (path "/ff3625c2-684b-47d8-96d9-4a80a872bce2/52c85c52-b153-4941-a9fe-aacff9d2a3b0")
    (attr smd)
    (fp_text reference "U2" (at 0 -5.9 90) (layer "F.SilkS")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp 31d3292e-0cda-4248-9d5c-38372bbfe363)
    )
    (fp_text value "CH340C" (at 0 5.9 90) (layer "F.Fab")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp 2f060523-f347-4787-9348-54a8149258cb)
    )
    (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab")
      (effects (font (size 0.98 0.98) (thickness 0.15)))
      (tstamp 36c7933f-cfd6-4174-aeb6-cb5799e52e63)
    )
    (fp_line (start 0 5.06) (end 1.95 5.06) (layer "F.SilkS") (width 0.12) (tstamp 618e54c5-115b-4114-9fd4-7cbaaec48c7d))
    (fp_line (start 0 -5.06) (end -3.45 -5.06) (layer "F.SilkS") (width 0.12) (tstamp 99a8c6f3-f05e-4d31-a25a-95e2dfc2c919))
    (fp_line (start 0 5.06) (end -1.95 5.06) (layer "F.SilkS") (width 0.12) (tstamp c791b350-e569-4539-85b1-84bd4dcd9bcb))
    (fp_line (start 0 -5.06) (end 1.95 -5.06) (layer "F.SilkS") (width 0.12) (tstamp ee9248ee-b382-4dfd-97fe-fd6ed5de3832))
    (fp_line (start -3.7 -5.2) (end -3.7 5.2) (layer "F.CrtYd") (width 0.05) (tstamp 41abb317-9770-40d4-b0be-2e993ab9b0f4))
    (fp_line (start -3.7 5.2) (end 3.7 5.2) (layer "F.CrtYd") (width 0.05) (tstamp baa81adc-1955-4caa-ac6a-a06ac64c3059))
    (fp_line (start 3.7 -5.2) (end -3.7 -5.2) (layer "F.CrtYd") (width 0.05) (tstamp f4067e4f-bcab-4d19-bdc2-2916e88ef135))
    (fp_line (start 3.7 5.2) (end 3.7 -5.2) (layer "F.CrtYd") (width 0.05) (tstamp fd063b47-3e76-4898-a660-6504fcb9c002))
    (fp_line (start 1.95 4.95) (end -1.95 4.95) (layer "F.Fab") (width 0.1) (tstamp 2f5374c4-bf43-455b-893a-9578cd041fdc))
    (fp_line (start -1.95 -3.975) (end -0.975 -4.95) (layer "F.Fab") (width 0.1) (tstamp 774478d2-0297-4d02-8766-e4a8ab06a176))
    (fp_line (start -0.975 -4.95) (end 1.95 -4.95) (layer "F.Fab") (width 0.1) (tstamp c34ffc45-c3f5-4960-8855-731119a42b37))
    (fp_line (start -1.95 4.95) (end -1.95 -3.975) (layer "F.Fab") (width 0.1) (tstamp e36aa92d-8543-4937-81ec-df32ae08d7f9))
    (fp_line (start 1.95 -4.95) (end 1.95 4.95) (layer "F.Fab") (width 0.1) (tstamp e8ee8f98-90e3-4c0c-a337-d1fa08c451e4))
    (pad "1" smd roundrect (at -2.475 -4.445 90) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25)
      (net 2 "GND") (pinfunction "GND") (pintype "power_in") (tstamp 8eda5634-1735-4c73-9489-f0108942d952))
    (pad "2" smd roundrect (at -2.475 -3.175 90) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25)
      (net 16 "/ESP8266/RX") (pinfunction "TXD") (pintype "output") (tstamp 52f36366-4395-4c26-a262-0bfc5f64d673))
    (pad "3" smd roundrect (at -2.475 -1.905 90) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25)
      (net 17 "/ESP8266/TX") (pinfunction "RXD") (pintype "input") (tstamp c7318cad-514f-48ab-b6f4-478cb49c6bce))
    (pad "4" smd roundrect (at -2.475 -0.635 90) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25)
      (net 3 "+3V3") (pinfunction "V3") (pintype "passive") (tstamp 2cbbd5f1-2197-479d-a661-e20dfc9b276d))
    (pad "5" smd roundrect (at -2.475 0.635 90) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25)
      (net 19 "/ESP8266/Dp") (pinfunction "UD+") (pintype "bidirectional") (tstamp d68e0878-1a6f-4d79-85a5-f8005009a7b2))
    (pad "6" smd roundrect (at -2.475 1.905 90) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25)
      (net 20 "/ESP8266/Dn") (pinfunction "UD-") (pintype "bidirectional") (tstamp 240ef12d-5727-43f1-8ff0-84f44af2df0d))
    (pad "7" smd roundrect (at -2.475 3.175 90) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25)
      (net 29 "unconnected-(U2-Pad7)") (pinfunction "NC") (pintype "no_connect") (tstamp fd9377cd-3df9-4e1a-8734-7f53e647694c))
    (pad "8" smd roundrect (at -2.475 4.445 90) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25)
      (net 30 "unconnected-(U2-Pad8)") (pinfunction "NC") (pintype "no_connect") (tstamp a01e9dcf-3171-4e9b-b665-9abcf7c275ee))
    (pad "9" smd roundrect (at 2.475 4.445 90) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25)
      (net 31 "unconnected-(U2-Pad9)") (pinfunction "~{CTS}") (pintype "input+no_connect") (tstamp 2def959b-ff92-4256-9e14-f53fe03174a1))
    (pad "10" smd roundrect (at 2.475 3.175 90) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25)
      (net 32 "unconnected-(U2-Pad10)") (pinfunction "~{DSR}") (pintype "input+no_connect") (tstamp 0fe10355-9bff-451d-9553-0e09162ee625))
    (pad "11" smd roundrect (at 2.475 1.905 90) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25)
      (net 33 "unconnected-(U2-Pad11)") (pinfunction "~{RI}") (pintype "input+no_connect") (tstamp 97beba68-6dbe-41ef-9679-5dfd13065860))
    (pad "12" smd roundrect (at 2.475 0.635 90) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25)
      (net 34 "unconnected-(U2-Pad12)") (pinfunction "~{DCD}") (pintype "input+no_connect") (tstamp 8a3df467-64d8-482d-acd9-bfae8dbdfae9))
    (pad "13" smd roundrect (at 2.475 -0.635 90) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25)
      (net 27 "/ESP8266/DTR") (pinfunction "~{DTR}") (pintype "output") (tstamp c82bbccb-01cd-4b61-9030-bbe8d2cc46b8))
    (pad "14" smd roundrect (at 2.475 -1.905 90) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25)
      (net 26 "/ESP8266/RTS") (pinfunction "~{RTS}") (pintype "output") (tstamp e5fc961f-e226-4601-83cb-6b6728341ba3))
    (pad "15" smd roundrect (at 2.475 -3.175 90) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25)
      (net 35 "unconnected-(U2-Pad15)") (pinfunction "R232") (pintype "input+no_connect") (tstamp d235e872-2da0-4faa-b1c5-0beceaa5e792))
    (pad "16" smd roundrect (at 2.475 -4.445 90) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25)
      (net 3 "+3V3") (pinfunction "VCC") (pintype "power_in") (tstamp 0d8359f3-25c3-421a-9a7f-7907ee7575b2))
    (model "${KICAD6_3DMODEL_DIR}/Package_SO.3dshapes/SOIC-16_3.9x9.9mm_P1.27mm.wrl"
      (offset (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (footprint "Package_TO_SOT_SMD:SOT-23-6" (layer "F.Cu")
    (tedit 5F6F9B37) (tstamp 8ee7dbf3-e8d2-481a-ba94-4c37faa7e978)
    (at 112.6375 89.9)
    (descr "SOT, 6 Pin (https://www.jedec.org/sites/default/files/docs/Mo-178c.PDF variant AB), generated with kicad-footprint-generator ipc_gullwing_generator.py")
    (tags "SOT TO_SOT_SMD")
    (property "Sheetfile" "certification-section.kicad_sch")
    (property "Sheetname" "certification")
    (path "/e97f5c9f-b2e7-43c2-9365-8a41f52decb4/eb57d8f8-d93b-4b16-95e7-ec1763e77eeb")
    (attr smd)
    (fp_text reference "U4" (at 0 -2.4) (layer "F.SilkS")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp 5fbfe501-7645-4ea9-9a0f-6bcf03c61cd9)
    )
    (fp_text value "MAX5812M" (at 0 2.4) (layer "F.Fab")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp 53fa8bdc-7212-4f1c-95e3-f6e7743c44e3)
    )
    (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab")
      (effects (font (size 0.4 0.4) (thickness 0.06)))
      (tstamp fa88b597-ca9c-419d-be1f-9abccc9f7a18)
    )
    (fp_line (start 0 -1.56) (end -1.8 -1.56) (layer "F.SilkS") (width 0.12) (tstamp 01a3e33a-cde7-4193-9477-12c00106b1fc))
    (fp_line (start 0 1.56) (end -0.8 1.56) (layer "F.SilkS") (width 0.12) (tstamp 39bb7167-b7be-46ea-99b5-81f95642de5e))
    (fp_line (start 0 1.56) (end 0.8 1.56) (layer "F.SilkS") (width 0.12) (tstamp 963bb3fd-6784-402e-a2a1-854818625042))
    (fp_line (start 0 -1.56) (end 0.8 -1.56) (layer "F.SilkS") (width 0.12) (tstamp e213317e-8cc7-4610-ac69-52ec71810d0a))
    (fp_line (start 2.05 1.7) (end 2.05 -1.7) (layer "F.CrtYd") (width 0.05) (tstamp 0714922c-2fdd-4a42-b655-0c8d4db0e1c4))
    (fp_line (start -2.05 1.7) (end 2.05 1.7) (layer "F.CrtYd") (width 0.05) (tstamp 5c084e35-5998-4244-807e-2bfe15c181a9))
    (fp_line (start 2.05 -1.7) (end -2.05 -1.7) (layer "F.CrtYd") (width 0.05) (tstamp 8430421c-1a8a-4deb-944e-96d472a25986))
    (fp_line (start -2.05 -1.7) (end -2.05 1.7) (layer "F.CrtYd") (width 0.05) (tstamp 9d860403-940c-4987-affb-c2f2833c4bd9))
    (fp_line (start 0.8 -1.45) (end 0.8 1.45) (layer "F.Fab") (width 0.1) (tstamp 1827cf1e-f6cd-4ac3-98f1-eefaa969b224))
    (fp_line (start -0.8 -1.05) (end -0.4 -1.45) (layer "F.Fab") (width 0.1) (tstamp 51a759ca-4368-41bc-b80f-9fa904ad9105))
    (fp_line (start -0.8 1.45) (end -0.8 -1.05) (layer "F.Fab") (width 0.1) (tstamp 66c62020-2d6e-48ad-b3c8-e6a699763397))
    (fp_line (start 0.8 1.45) (end -0.8 1.45) (layer "F.Fab") (width 0.1) (tstamp 6a07ecf6-2cb4-492c-b694-29716d608cab))
    (fp_line (start -0.4 -1.45) (end 0.8 -1.45) (layer "F.Fab") (width 0.1) (tstamp af20f240-2286-42a5-8100-f37c5caa6668))
    (pad "1" smd roundrect (at -1.1375 -0.95) (size 1.325 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25)
      (net 1 "+5V") (pinfunction "Vdd") (pintype "power_in") (tstamp 96568286-7ca7-4299-9ab7-dd268fe53a88))
    (pad "2" smd roundrect (at -1.1375 0) (size 1.325 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25)
      (net 2 "GND") (pinfunction "GND") (pintype "power_in") (tstamp f7958c37-da77-4bfb-8779-719f8541a27d))
    (pad "3" smd roundrect (at -1.1375 0.95) (size 1.325 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25)
      (net 44 "/certification/GPIO4{slash}SDA") (pinfunction "SDA") (pintype "bidirectional") (tstamp 4f1cc57e-dfa4-46b3-8aaf-a4dbae718b62))
    (pad "4" smd roundrect (at 1.1375 0.95) (size 1.325 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25)
      (net 45 "/certification/GPIO5{slash}SCL") (pinfunction "SCL") (pintype "input") (tstamp 0eca511d-e712-4832-8624-bcebbba27c50))
    (pad "5" smd roundrect (at 1.1375 0) (size 1.325 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25)
      (net 2 "GND") (pinfunction "ADD") (pintype "passive") (tstamp 0e06d1f5-b5f6-47a7-ba18-84292a4ef27a))
    (pad "6" smd roundrect (at 1.1375 -0.95) (size 1.325 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25)
      (net 46 "unconnected-(U4-Pad6)") (pinfunction "Vout") (pintype "output") (tstamp bfcc5e4c-8012-4766-b299-7e6884e42d29))
    (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23-6.wrl"
      (offset (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (footprint "Connector_JST:JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical" (layer "F.Cu")
    (tedit 5B78AD87) (tstamp 900f23d0-3434-4005-a4b9-27621d3055db)
    (at 70 108 180)
    (descr "JST SH series connector, BM04B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator")
    (tags "connector JST SH side entry")
    (property "LCSC" "C145956")
    (property "Sheetfile" "esp8266-arduino-section.kicad_sch")
    (property "Sheetname" "ESP8266")
    (path "/ff3625c2-684b-47d8-96d9-4a80a872bce2/afb073a2-ae80-426a-acaf-2e1199ee364b")
    (attr smd)
    (fp_text reference "J3" (at 0 -3.3) (layer "F.SilkS")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp 72d05c23-8fb0-410b-b9ca-e38690ea940c)
    )
    (fp_text value "JST SH-1x4" (at 0 3.3) (layer "F.Fab")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp 8d059d87-d35f-44d8-8e04-0e35d049680d)
    )
    (fp_text user "${REFERENCE}" (at 0 -0.25) (layer "F.Fab")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp 6942850b-38c0-44fa-825f-160ecc86892d)
    )
    (fp_line (start -2.06 1.11) (end -2.06 2.1) (layer "F.SilkS") (width 0.12) (tstamp 416fcc07-baa5-41da-8519-c8d9ae791ef5))
    (fp_line (start -3.11 -0.04) (end -3.11 1.11) (layer "F.SilkS") (width 0.12) (tstamp 4244612e-a7bf-498e-b695-d234185b9d90))
    (fp_line (start -3.11 1.11) (end -2.06 1.11) (layer "F.SilkS") (width 0.12) (tstamp 5040a0c1-143b-49e4-b7c0-9877d9411bc7))
    (fp_line (start 3.11 1.11) (end 2.06 1.11) (layer "F.SilkS") (width 0.12) (tstamp bc1b8d24-99e5-4ef0-bb15-9a7b7188ab21))
    (fp_line (start -1.94 -2.01) (end 1.94 -2.01) (layer "F.SilkS") (width 0.12) (tstamp dfd7b448-8757-412f-bd49-7e7013179bd1))
    (fp_line (start 3.11 -0.04) (end 3.11 1.11) (layer "F.SilkS") (width 0.12) (tstamp eed8d599-3c89-4ec9-9236-2bd0f5fd6e8a))
    (fp_line (start 3.9 2.6) (end 3.9 -2.6) (layer "F.CrtYd") (width 0.05) (tstamp 5525a335-9353-47dc-8ae5-390527e79ae1))
    (fp_line (start -3.9 2.6) (end 3.9 2.6) (layer "F.CrtYd") (width 0.05) (tstamp 78b3d31b-2f38-4e0a-a9e1-419e032605e6))
    (fp_line (start 3.9 -2.6) (end -3.9 -2.6) (layer "F.CrtYd") (width 0.05) (tstamp c2920f95-b3fd-4975-a27a-0b606667286f))
    (fp_line (start -3.9 -2.6) (end -3.9 2.6) (layer "F.CrtYd") (width 0.05) (tstamp f9213aa5-3ca6-4538-aeaa-d0fc2be6bf17))
    (fp_line (start -0.65 -0.95) (end -0.35 -0.95) (layer "F.Fab") (width 0.1) (tstamp 0f742964-6e6e-430a-98a5-35038575577d))
    (fp_line (start 1.65 -1.55) (end 1.35 -1.55) (layer "F.Fab") (width 0.1) (tstamp 1b3cfb52-0036-407d-a84e-30bc13eb289e))
    (fp_line (start 0.35 -1.55) (end 0.35 -0.95) (layer "F.Fab") (width 0.1) (tstamp 1d017325-3755-4baf-b8cb-559f15d9c225))
    (fp_line (start 1.35 -1.55) (end 1.35 -0.95) (layer "F.Fab") (width 0.1) (tstamp 1e6c1082-4d5d-421f-861c-d1ebd06fdcb1))
    (fp_line (start -1.65 -0.95) (end -1.35 -0.95) (layer "F.Fab") (width 0.1) (tstamp 391c478f-0779-4196-a369-b134940bb09f))
    (fp_line (start 0.35 -0.95) (end 0.65 -0.95) (layer "F.Fab") (width 0.1) (tstamp 43bcb239-07d4-434a-829b-73a4ab64e191))
    (fp_line (start -3 1) (end 3 1) (layer "F.Fab") (width 0.1) (tstamp 4629210a-167b-4015-87be-260bb5c5ddce))
    (fp_line (start -1.35 -0.95) (end -1.35 -1.55) (layer "F.Fab") (width 0.1) (tstamp 58a97278-0dca-4489-85d8-90f2ed606d8c))
    (fp_line (start 0.65 -0.95) (end 0.65 -1.55) (layer "F.Fab") (width 0.1) (tstamp 5b00ba78-8682-44ab-a51f-93ab6dd7d9c6))
    (fp_line (start -1.65 -1.55) (end -1.65 -0.95) (layer "F.Fab") (width 0.1) (tstamp 765b44f1-6caf-496e-874c-09a1232f275b))
    (fp_line (start -3 -1.9) (end 3 -1.9) (layer "F.Fab") (width 0.1) (tstamp 7fe5601f-c378-47ed-b29e-a3ba00454b01))
    (fp_line (start -3 1) (end -3 -1.9) (layer "F.Fab") (width 0.1) (tstamp 8503ff5a-6aa2-4d7e-9bba-cc40b25da56a))
    (fp_line (start -1.5 0.292893) (end -1 1) (layer "F.Fab") (width 0.1) (tstamp 85e42f55-900a-4695-bc77-61994173d009))
    (fp_line (start -1.35 -1.55) (end -1.65 -1.55) (layer "F.Fab") (width 0.1) (tstamp 980879d7-5c0e-4c44-81ef-06eb3adaee2c))
    (fp_line (start -0.65 -1.55) (end -0.65 -0.95) (layer "F.Fab") (width 0.1) (tstamp b11d9bc5-2caa-4d52-a0a3-4f79846f5b16))
    (fp_line (start 1.35 -0.95) (end 1.65 -0.95) (layer "F.Fab") (width 0.1) (tstamp c8589d03-591b-41a0-87b8-d92e8163e6a3))
    (fp_line (start -0.35 -0.95) (end -0.35 -1.55) (layer "F.Fab") (width 0.1) (tstamp c9cdca3a-ff6e-4efe-9a29-d95c5d715481))
    (fp_line (start -2 1) (end -1.5 0.292893) (layer "F.Fab") (width 0.1) (tstamp cda2dfa2-b2e7-4b08-bdbc-9bf13f4580de))
    (fp_line (start 0.65 -1.55) (end 0.35 -1.55) (layer "F.Fab") (width 0.1) (tstamp d90dae58-53c2-48ae-80be-399fbb8a8151))
    (fp_line (start 1.65 -0.95) (end 1.65 -1.55) (layer "F.Fab") (width 0.1) (tstamp e1dbb035-e7d4-46dd-a389-93e8d5ab34a9))
    (fp_line (start -0.35 -1.55) (end -0.65 -1.55) (layer "F.Fab") (width 0.1) (tstamp ec7f6dff-a503-4162-91c8-47f43a26ad1e))
    (fp_line (start 3 1) (end 3 -1.9) (layer "F.Fab") (width 0.1) (tstamp f0f228d1-f0cc-46a7-851f-f002dc0792a8))
    (pad "1" smd roundrect (at -1.5 1.325 180) (size 0.6 1.55) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25)
      (net 2 "GND") (pinfunction "Pin_1") (pintype "passive") (tstamp f0d7ede6-10fd-48df-b899-ed1949c5c04c))
    (pad "2" smd roundrect (at -0.5 1.325 180) (size 0.6 1.55) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25)
      (net 3 "+3V3") (pinfunction "Pin_2") (pintype "passive") (tstamp 12bf0f3a-d4b8-4448-aebd-df197f0e8496))
    (pad "3" smd roundrect (at 0.5 1.325 180) (size 0.6 1.55) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25)
      (net 12 "/ESP8266/GPIO4{slash}SDA") (pinfunction "Pin_3") (pintype "passive") (tstamp 1cb1e0e3-3fb2-49ab-937d-5b6b29e4adb1))
    (pad "4" smd roundrect (at 1.5 1.325 180) (size 0.6 1.55) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25)
      (net 13 "/ESP8266/GPIO5{slash}SCL") (pinfunction "Pin_4") (pintype "passive") (tstamp c973cc97-8eac-4080-bb44-bd49ee1e1eef))
    (pad "MP" smd roundrect (at 2.8 -1.2 180) (size 1.2 1.8) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.208333)
      (net 43 "unconnected-(J3-PadMP)") (pinfunction "MP") (pintype "passive+no_connect") (tstamp a874c799-a0dd-461e-bd82-929f28a60cc7))
    (pad "MP" smd roundrect (at -2.8 -1.2 180) (size 1.2 1.8) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.208333)
      (net 43 "unconnected-(J3-PadMP)") (pinfunction "MP") (pintype "passive+no_connect") (tstamp e36a5c09-22c5-42e3-996a-6fe7c09d7f2b))
    (model "${KICAD6_3DMODEL_DIR}/Connector_JST.3dshapes/JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical.wrl"
      (offset (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (footprint "Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A" (layer "F.Cu")
    (tedit 5EBA9318) (tstamp a5478017-91ba-4088-82a5-6e22aabfab47)
    (at 49 89.11 -90)
    (descr "Tantalum Capacitor SMD Kemet-A (3216-18 Metric), IPC_7351 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator")
    (tags "capacitor tantalum")
    (property "LCSC" "C7171")
    (property "PN" "FG28X5R1E475KRT06")
    (property "Sheetfile" "esp8266-arduino-section.kicad_sch")
    (property "Sheetname" "ESP8266")
    (path "/ff3625c2-684b-47d8-96d9-4a80a872bce2/3f88bc7b-07a9-4d64-843a-e0a083767da4")
    (attr smd)
    (fp_text reference "C3" (at 0 -1.75 90) (layer "F.SilkS")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp f9bdbe47-7400-46b3-bf5d-1de7cbb6fe81)
    )
    (fp_text value "10uF" (at 0 1.75 90) (layer "F.Fab")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp d25bbdc9-47e1-48ba-9908-58d9ccb118b0)
    )
    (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
      (tstamp 212a006e-2314-418f-a4f9-861e80bb11b4)
    )
    (fp_line (start -2.31 -0.935) (end -2.31 0.935) (layer "F.SilkS") (width 0.12) (tstamp 3c79e170-ac0b-4e96-8929-fdb40c607bec))
    (fp_line (start -2.31 0.935) (end 1.6 0.935) (layer "F.SilkS") (width 0.12) (tstamp 6d5c63d8-bcb7-4b38-a00d-c6c48fa4b1a8))
    (fp_line (start 1.6 -0.935) (end -2.31 -0.935) (layer "F.SilkS") (width 0.12) (tstamp 98349d6f-b9ab-4715-9df2-f25e2f75e117))
    (fp_line (start -2.3 1.05) (end -2.3 -1.05) (layer "F.CrtYd") (width 0.05) (tstamp 293c46dc-42e7-4fe5-b2c2-a84317090ccc))
    (fp_line (start -2.3 -1.05) (end 2.3 -1.05) (layer "F.CrtYd") (width 0.05) (tstamp bee3824e-3e39-4f55-8dd0-e1d0c913320f))
    (fp_line (start 2.3 1.05) (end -2.3 1.05) (layer "F.CrtYd") (width 0.05) (tstamp c987d6d0-f764-460f-a98b-c2d80b357cfa))
    (fp_line (start 2.3 -1.05) (end 2.3 1.05) (layer "F.CrtYd") (width 0.05) (tstamp eb9c45bf-1e74-4675-b123-1b39ee2ece4f))
    (fp_line (start 1.6 0.8) (end 1.6 -0.8) (layer "F.Fab") (width 0.1) (tstamp 700a5dd9-cbf2-4eff-9afb-c80ace2ccc9f))
    (fp_line (start -1.2 -0.8) (end -1.6 -0.4) (layer "F.Fab") (width 0.1) (tstamp 91afa69f-2737-454b-a0f1-a9d70de3d71f))
    (fp_line (start -1.6 -0.4) (end -1.6 0.8) (layer "F.Fab") (width 0.1) (tstamp 9a43d9b3-4eb9-4446-a202-0ffd36c54f1c))
    (fp_line (start -1.6 0.8) (end 1.6 0.8) (layer "F.Fab") (width 0.1) (tstamp abab0f3c-f2af-4981-9505-a9bb74325e8f))
    (fp_line (start 1.6 -0.8) (end -1.2 -0.8) (layer "F.Fab") (width 0.1) (tstamp e3902119-c7f4-4332-a98e-a929c3b358a5))
    (pad "1" smd roundrect (at -1.35 0 270) (size 1.4 1.35) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.185185)
      (net 3 "+3V3") (pintype "passive") (tstamp dc28e37b-0997-40c6-81ca-3e2f35b69bf3))
    (pad "2" smd roundrect (at 1.35 0 270) (size 1.4 1.35) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.185185)
      (net 2 "GND") (pintype "passive") (tstamp 4f242efc-6036-42d9-afca-d07b850c6b18))
    (model "${KICAD6_3DMODEL_DIR}/Capacitor_Tantalum_SMD.3dshapes/CP_EIA-3216-18_Kemet-A.wrl"
      (offset (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (footprint "Resistor_SMD:R_0805_2012Metric" (layer "F.Cu")
    (tedit 5F68FEEE) (tstamp aa6d1d28-f7ba-4b1d-828d-e7b1aa2d395d)
    (at 67 89 -90)
    (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
    (tags "resistor")
    (property "LCSC" "C149504")
    (property "Sheetfile" "esp8266-arduino-section.kicad_sch")
    (property "Sheetname" "ESP8266")
    (path "/ff3625c2-684b-47d8-96d9-4a80a872bce2/8b567e24-d4e2-44c2-8105-5082af6cee02")
    (attr smd)
    (fp_text reference "R9" (at 0 -1.65 90) (layer "F.SilkS")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp e1da2003-a08a-46d2-8476-ce60d43e68bb)
    )
    (fp_text value "100k" (at 0 1.65 90) (layer "F.Fab")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp f8ffe452-490d-4dcd-8dc4-5e379a44725e)
    )
    (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab")
      (effects (font (size 0.5 0.5) (thickness 0.08)))
      (tstamp 2742550b-4a67-4d9c-82c4-4190c0d44a59)
    )
    (fp_line (start -0.227064 0.735) (end 0.227064 0.735) (layer "F.SilkS") (width 0.12) (tstamp 43443b07-e8b6-410c-94c9-a41a53a8a1a6))
    (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) (layer "F.SilkS") (width 0.12) (tstamp a77e1dd6-794d-431d-977f-ad0c0559ad11))
    (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer "F.CrtYd") (width 0.05) (tstamp b760e362-3765-4e5d-9a22-63f71631d829))
    (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer "F.CrtYd") (width 0.05) (tstamp bc6f6896-a406-45e6-a657-707bda1937a9))
    (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer "F.CrtYd") (width 0.05) (tstamp c73fc501-d2be-422e-b1a4-c316e6c85880))
    (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer "F.CrtYd") (width 0.05) (tstamp fb8ff099-76b7-4225-a061-8a42bf9cd363))
    (fp_line (start 1 0.625) (end -1 0.625) (layer "F.Fab") (width 0.1) (tstamp 5f4d4ea5-1d5e-4489-9458-a16d7e638c0b))
    (fp_line (start -1 -0.625) (end 1 -0.625) (layer "F.Fab") (width 0.1) (tstamp 88be353d-86d9-42d8-b604-68b906fb470d))
    (fp_line (start 1 -0.625) (end 1 0.625) (layer "F.Fab") (width 0.1) (tstamp a0b326ad-2146-4e78-98b8-0333f4a1c0ca))
    (fp_line (start -1 0.625) (end -1 -0.625) (layer "F.Fab") (width 0.1) (tstamp c3da9048-0714-4647-8a75-e04b6d798751))
    (pad "1" smd roundrect (at -0.9125 0 270) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902)
      (net 28 "/ESP8266/ADC") (pintype "passive") (tstamp 82b67738-e1a5-4811-96ab-6d8a9db03c57))
    (pad "2" smd roundrect (at 0.9125 0 270) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902)
      (net 2 "GND") (pintype "passive") (tstamp 52496a52-2d73-4d3e-a2ce-9a31e285eb73))
    (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl"
      (offset (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (footprint "Resistor_SMD:R_0805_2012Metric" (layer "F.Cu")
    (tedit 5F68FEEE) (tstamp b07bfcdf-c5f5-4d5f-87f1-ccacef62d7c1)
    (at 70 89 -90)
    (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
    (tags "resistor")
    (property "LCSC" "C17556")
    (property "Sheetfile" "esp8266-arduino-section.kicad_sch")
    (property "Sheetname" "ESP8266")
    (path "/ff3625c2-684b-47d8-96d9-4a80a872bce2/c6f64731-9201-4235-8551-17826920347a")
    (attr smd)
    (fp_text reference "R10" (at 0 -1.65 90) (layer "F.SilkS")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp 3e0cabe7-2a6e-4aae-a795-35bd1b9a29ce)
    )
    (fp_text value "220k" (at 0 1.65 90) (layer "F.Fab")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp c8034f37-b944-4e0e-8c49-ad8a49505eb4)
    )
    (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab")
      (effects (font (size 0.5 0.5) (thickness 0.08)))
      (tstamp c4e1d54d-77c6-4528-9c40-c81495dd1aa5)
    )
    (fp_line (start -0.227064 0.735) (end 0.227064 0.735) (layer "F.SilkS") (width 0.12) (tstamp 2c0fd61e-662f-440d-b584-082136386860))
    (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) (layer "F.SilkS") (width 0.12) (tstamp 31d16ed8-af1f-4502-8fdc-05f2bd624b87))
    (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer "F.CrtYd") (width 0.05) (tstamp 098499d4-49fd-451a-95be-840355bd56f5))
    (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer "F.CrtYd") (width 0.05) (tstamp 1c6871e2-6fd1-49e7-a5bf-e973f1848099))
    (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer "F.CrtYd") (width 0.05) (tstamp 93401af6-86ea-4b14-bedd-4c0f9eb38cc7))
    (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer "F.CrtYd") (width 0.05) (tstamp bcd02940-8b05-4572-bc23-8a6464a3ef8e))
    (fp_line (start 1 0.625) (end -1 0.625) (layer "F.Fab") (width 0.1) (tstamp 5605bf44-2008-4422-a482-bbb165dfa7cf))
    (fp_line (start -1 -0.625) (end 1 -0.625) (layer "F.Fab") (width 0.1) (tstamp 66f9c0d6-100a-4413-bd62-d2bb640fc9bc))
    (fp_line (start 1 -0.625) (end 1 0.625) (layer "F.Fab") (width 0.1) (tstamp cfd053cd-f6d6-40f5-8e76-a1a2bef0d084))
    (fp_line (start -1 0.625) (end -1 -0.625) (layer "F.Fab") (width 0.1) (tstamp d17a9611-ce34-47f7-9c48-da4c49f44615))
    (pad "1" smd roundrect (at -0.9125 0 270) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902)
      (net 6 "/ESP8266/A0") (pintype "passive") (tstamp 12281b0b-d360-4f13-969c-2a24e0a7238a))
    (pad "2" smd roundrect (at 0.9125 0 270) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902)
      (net 28 "/ESP8266/ADC") (pintype "passive") (tstamp c516aa17-c564-4d46-962c-cc3e71478cfe))
    (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl"
      (offset (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (footprint "Resistor_SMD:R_0805_2012Metric" (layer "F.Cu")
    (tedit 5F68FEEE) (tstamp c250e57c-edb8-42be-8487-7e70b78c1eb3)
    (at 58 89 90)
    (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
    (tags "resistor")
    (property "LCSC" "C17444")
    (property "Sheetfile" "esp8266-arduino-section.kicad_sch")
    (property "Sheetname" "ESP8266")
    (path "/ff3625c2-684b-47d8-96d9-4a80a872bce2/a7718b7a-de6a-49e2-8a7f-e97ff7aae6a9")
    (attr smd)
    (fp_text reference "R6" (at 0 -1.65 90) (layer "F.SilkS")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp ba383ea3-e13f-43cc-812d-93943515de4a)
    )
    (fp_text value "12k" (at 0 1.65 90) (layer "F.Fab")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp 716f6fd0-0b41-4457-a777-0377f076f5f8)
    )
    (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab")
      (effects (font (size 0.5 0.5) (thickness 0.08)))
      (tstamp dbd12953-6440-4e3c-a104-2d289d8e4ed3)
    )
    (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) (layer "F.SilkS") (width 0.12) (tstamp 4b1b7259-48e8-4153-9ccf-6e96d4237991))
    (fp_line (start -0.227064 0.735) (end 0.227064 0.735) (layer "F.SilkS") (width 0.12) (tstamp 67abad77-c255-4a20-aa2a-488838470cf8))
    (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer "F.CrtYd") (width 0.05) (tstamp 99068d25-6024-4c1b-b63c-85642d94c87a))
    (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer "F.CrtYd") (width 0.05) (tstamp adc9ec63-2bd8-4a30-b7fc-96a4048140bb))
    (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer "F.CrtYd") (width 0.05) (tstamp f0ecacae-e648-431c-941d-500255d73529))
    (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer "F.CrtYd") (width 0.05) (tstamp faf3fb51-f23f-49fc-9a73-8fb714a38337))
    (fp_line (start -1 -0.625) (end 1 -0.625) (layer "F.Fab") (width 0.1) (tstamp 45b30ec7-f3cb-4ec6-8271-410e5e1156a3))
    (fp_line (start 1 0.625) (end -1 0.625) (layer "F.Fab") (width 0.1) (tstamp 76e8ba96-2790-4cc6-aaec-9ffcbf28c7f4))
    (fp_line (start -1 0.625) (end -1 -0.625) (layer "F.Fab") (width 0.1) (tstamp 8adc2b8b-f287-4fe8-971c-d51bf1adbc40))
    (fp_line (start 1 -0.625) (end 1 0.625) (layer "F.Fab") (width 0.1) (tstamp c6c801eb-a62e-4709-ba8f-cc4ab2962bb0))
    (pad "1" smd roundrect (at -0.9125 0 90) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902)
      (net 3 "+3V3") (pintype "passive") (tstamp 6968a379-a263-4e3f-9ead-3c301156e61d))
    (pad "2" smd roundrect (at 0.9125 0 90) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902)
      (net 5 "/ESP8266/RST") (pintype "passive") (tstamp 53e54179-ca86-45de-a24e-a3499a5f10ef))
    (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl"
      (offset (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (footprint "cert-board:HRO_TYPE-C-31-M-12" (layer "F.Cu")
    (tedit 626F20DF) (tstamp d2cc054b-9406-490d-ade9-358bce3c0b56)
    (at 54.5 108.4625)
    (property "LCSC" "C165948")
    (property "MANUFACTURER" "HRO Electronics")
    (property "MAXIMUM_PACKAGE_HEIGHT" "3.31mm")
    (property "PARTREV" "A")
    (property "STANDARD" "Manufacturer Recommendations")
    (property "Sheetfile" "esp8266-arduino-section.kicad_sch")
    (property "Sheetname" "ESP8266")
    (path "/ff3625c2-684b-47d8-96d9-4a80a872bce2/4666a7a2-6b7b-439c-bf4a-b0099c0852b2")
    (attr through_hole)
    (fp_text reference "J5" (at -1.825 -7.435) (layer "F.SilkS")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp ce7a0f3c-0da0-45b9-b6f8-4a8474c591c2)
    )
    (fp_text value "TYPE-C-31-M-12" (at -0.5 -0.4625) (layer "F.Fab")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp abee755b-8409-407c-aeb0-b7b60e54f028)
    )
    (fp_line (start 4.47 -2.81) (end 4.47 -1.37) (layer "F.SilkS") (width 0.127) (tstamp 3e1667d0-25e8-44c0-af55-7fd66178a644))
    (fp_line (start 4.47 1.37) (end 4.47 2.6) (layer "F.SilkS") (width 0.127) (tstamp 5dc56d43-162b-40f9-8dbd-ba25efb2f4cf))
    (fp_line (start 4.47 2.6) (end -4.47 2.6) (layer "F.SilkS") (width 0.127) (tstamp 73a0eba6-a915-4abd-94f1-366b503907a7))
    (fp_line (start -4.47 -2.81) (end -4.47 -1.37) (layer "F.SilkS") (width 0.127) (tstamp b8c36979-df24-47a2-bed6-c8f771a76490))
    (fp_line (start -4.47 2.6) (end -4.47 1.37) (layer "F.SilkS") (width 0.127) (tstamp ff2460c6-5784-4c0f-ac3a-99536e92b844))
    (fp_circle (center -3.4 -6.4) (end -3.3 -6.4) (layer "F.SilkS") (width 0.2) (fill none) (tstamp c4f8b8b7-31e2-4f43-9223-67247aebebc9))
    (fp_line (start 5.095 -6.07) (end -5.095 -6.07) (layer "F.CrtYd") (width 0.05) (tstamp 06cfcd46-b704-4a3a-9108-6ffce6be1ac7))
    (fp_line (start -5.095 -6.07) (end -5.095 2.85) (layer "F.CrtYd") (width 0.05) (tstamp 23568d63-eaa9-442f-a599-e1516c4c7089))
    (fp_line (start -5.095 2.85) (end 5.095 2.85) (layer "F.CrtYd") (width 0.05) (tstamp 51acc0f6-dbb5-4aaa-ad9c-08ac7a8f9c79))
    (fp_line (start 5.095 2.85) (end 5.095 -6.07) (layer "F.CrtYd") (width 0.05) (tstamp bfab5d6d-171a-4dcc-9737-266369a798be))
    (fp_line (start -4.47 2.6) (end 4.47 2.6) (layer "F.Fab") (width 0.127) (tstamp 2778b21d-7936-4283-979f-5366b56c324f))
    (fp_line (start 4.47 -4.7) (end -4.47 -4.7) (layer "F.Fab") (width 0.127) (tstamp 5291d8ef-4000-4f60-a970-e79c8e977713))
    (fp_line (start -4.47 -4.7) (end -4.47 2.6) (layer "F.Fab") (width 0.127) (tstamp cbf03142-7b6b-4c20-b3d8-c0f1fcfa763e))
    (fp_line (start 4.47 2.6) (end 4.47 -4.7) (layer "F.Fab") (width 0.127) (tstamp e54848cf-7587-409f-b9c4-ab825799aa30))
    (fp_circle (center -3.4 -6.4) (end -3.3 -6.4) (layer "F.Fab") (width 0.2) (fill none) (tstamp b0f20902-5d69-4fa5-992e-a452fa012428))
    (pad "" np_thru_hole circle (at 2.89 -3.65) (size 0.7 0.7) (drill 0.7) (layers *.Cu *.Mask) (tstamp 4135cd62-0938-4f46-bf5c-276b53a16edd))
    (pad "" np_thru_hole circle (at -2.89 -3.65) (size 0.7 0.7) (drill 0.7) (layers *.Cu *.Mask) (tstamp 6ee3af4f-05fb-489d-a143-e42c177dd2b4))
    (pad "A1B12" smd rect (at -3.25 -5.095) (size 0.6 1.45) (layers "F.Cu" "F.Paste" "F.Mask")
      (net 2 "GND") (pinfunction "GND") (pintype "power_in") (tstamp 51f8a4e2-67a8-49d5-84b5-b9988cf38e08))
    (pad "A4B9" smd rect (at -2.45 -5.095) (size 0.6 1.45) (layers "F.Cu" "F.Paste" "F.Mask")
      (net 1 "+5V") (pinfunction "VBUS") (pintype "power_in") (tstamp 825434cd-6dd2-4355-a5bb-8c39e3e8ed06))
    (pad "A5" smd rect (at -1.25 -5.095) (size 0.3 1.45) (layers "F.Cu" "F.Paste" "F.Mask")
      (net 18 "Net-(J5-PadA5)") (pinfunction "CC1") (pintype "bidirectional") (tstamp 7c214535-5553-4d7c-9e04-a06f3b3503b0))
    (pad "A6" smd rect (at -0.25 -5.095) (size 0.3 1.45) (layers "F.Cu" "F.Paste" "F.Mask")
      (net 19 "/ESP8266/Dp") (pinfunction "DP1") (pintype "bidirectional") (tstamp 2f7b8550-5c41-4f23-b072-7af2d49e8e15))
    (pad "A7" smd rect (at 0.25 -5.095) (size 0.3 1.45) (layers "F.Cu" "F.Paste" "F.Mask")
      (net 20 "/ESP8266/Dn") (pinfunction "DN1") (pintype "bidirectional") (tstamp 6bef3321-5bf3-44fd-8eae-e23e5b0d967a))
    (pad "A8" smd rect (at 1.25 -5.095) (size 0.3 1.45) (layers "F.Cu" "F.Paste" "F.Mask")
      (net 21 "unconnected-(J5-PadA8)") (pinfunction "SBU1") (pintype "bidirectional+no_connect") (tstamp c1bb0968-f35c-49bd-bf6b-8f4949894fad))
    (pad "B1A12" smd rect (at 3.25 -5.095) (size 0.6 1.45) (layers "F.Cu" "F.Paste" "F.Mask")
      (net 2 "GND") (pinfunction "GND") (pintype "power_in") (tstamp 92ad301d-ff66-4959-a65c-c5998185f534))
    (pad "B4A9" smd rect (at 2.45 -5.095) (size 0.6 1.45) (layers "F.Cu" "F.Paste" "F.Mask")
      (net 1 "+5V") (pinfunction "VBUS") (pintype "power_in") (tstamp a2dcf0a9-ee0f-460f-98f4-0ec9dba40b8f))
    (pad "B5" smd rect (at 1.75 -5.095) (size 0.3 1.45) (layers "F.Cu" "F.Paste" "F.Mask")
      (net 22 "Net-(J5-PadB5)") (pinfunction "CC2") (pintype "bidirectional") (tstamp 37e76997-735c-401a-8eaf-611a424bf9bc))
    (pad "B6" smd rect (at 0.75 -5.095) (size 0.3 1.45) (layers "F.Cu" "F.Paste" "F.Mask")
      (net 19 "/ESP8266/Dp") (pinfunction "DP2") (pintype "bidirectional") (tstamp e81a85d5-967a-47f7-a920-535526883ab7))
    (pad "B7" smd rect (at -0.75 -5.095) (size 0.3 1.45) (layers "F.Cu" "F.Paste" "F.Mask")
      (net 20 "/ESP8266/Dn") (pinfunction "DN2") (pintype "bidirectional") (tstamp eb90285e-4192-4eae-a319-8b3dd7964d08))
    (pad "B8" smd rect (at -1.75 -5.095) (size 0.3 1.45) (layers "F.Cu" "F.Paste" "F.Mask")
      (net 23 "unconnected-(J5-PadB8)") (pinfunction "SBU2") (pintype "bidirectional+no_connect") (tstamp 3edc5054-3d79-40e5-8374-36101381a6e2))
    (pad "S1" thru_hole oval (at -4.32 -4.18) (size 1.05 2.1) (drill oval 0.65 1.75) (layers *.Cu *.Mask)
      (net 2 "GND") (pinfunction "SHIELD") (pintype "passive") (tstamp 0ed74405-2499-415d-9e4d-d831168b419e))
    (pad "S2" thru_hole oval (at 4.32 -4.18) (size 1.05 2.1) (drill oval 0.65 1.75) (layers *.Cu *.Mask)
      (net 2 "GND") (pinfunction "SHIELD") (pintype "passive") (tstamp 9441365d-cdd6-4553-8ff2-988d086936d9))
    (pad "S3" thru_hole oval (at -4.32 0) (size 1.05 2.1) (drill oval 0.65 1.25) (layers *.Cu *.Mask)
      (net 2 "GND") (pinfunction "SHIELD") (pintype "passive") (tstamp 975a2ed5-c3a9-400f-a141-bc7a691a5c55))
    (pad "S4" thru_hole oval (at 4.32 0) (size 1.05 2.1) (drill oval 0.65 1.25) (layers *.Cu *.Mask)
      (net 2 "GND") (pinfunction "SHIELD") (pintype "passive") (tstamp 5d98914d-1801-43c8-96ca-19f222dbae40))
  )

  (footprint "Package_TO_SOT_SMD:TO-252-2" (layer "F.Cu")
    (tedit 5A70A390) (tstamp d59182ec-063d-4d4d-938e-f0de11b81422)
    (at 43 95 90)
    (descr "TO-252 / DPAK SMD package, http://www.infineon.com/cms/en/product/packages/PG-TO252/PG-TO252-3-1/")
    (tags "DPAK TO-252 DPAK-3 TO-252-3 SOT-428")
    (property "LCSC" "C14241")
    (property "Sheetfile" "esp8266-arduino-section.kicad_sch")
    (property "Sheetname" "ESP8266")
    (path "/ff3625c2-684b-47d8-96d9-4a80a872bce2/1d20ec93-b080-4e8a-86e4-87dbc30cd7d4")
    (attr smd)
    (fp_text reference "U1" (at 0 -4.5 90) (layer "F.SilkS")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp 9d81e19f-6b7d-4d77-878e-735d079f25e6)
    )
    (fp_text value "AMS1086CD-3.3" (at 0 4.5 90) (layer "F.Fab")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp f4a51b71-6f96-47fa-9e0b-4d6cebded4d3)
    )
    (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp 7d7006b8-45ed-42d0-a89e-81edc52449a2)
    )
    (fp_line (start -2.47 3.45) (end -2.47 3.18) (layer "F.SilkS") (width 0.12) (tstamp 20f0206a-afd6-4ba1-95ec-d0a43426e4c6))
    (fp_line (start -2.47 3.18) (end -3.57 3.18) (layer "F.SilkS") (width 0.12) (tstamp 51856cf3-1004-47ee-8741-631d227e638a))
    (fp_line (start -0.97 3.45) (end -2.47 3.45) (layer "F.SilkS") (width 0.12) (tstamp 619f5196-4751-47dd-ae2d-5b661611dfb9))
    (fp_line (start -2.47 -3.45) (end -2.47 -3.18) (layer "F.SilkS") (width 0.12) (tstamp 91cb4169-5368-4349-a325-bbe8d167fa94))
    (fp_line (start -0.97 -3.45) (end -2.47 -3.45) (layer "F.SilkS") (width 0.12) (tstamp bf4c4697-ab47-438d-bf44-da0b19503028))
    (fp_line (start -2.47 -3.18) (end -5.3 -3.18) (layer "F.SilkS") (width 0.12) (tstamp e08fdd3f-db53-49de-9f72-03f062ae6254))
    (fp_line (start -5.55 -3.5) (end -5.55 3.5) (layer "F.CrtYd") (width 0.05) (tstamp 19466964-d3ca-4ca6-b174-70964dbcd23b))
    (fp_line (start 5.55 -3.5) (end -5.55 -3.5) (layer "F.CrtYd") (width 0.05) (tstamp 447e4d48-8363-4d0f-a2f0-6b2bda49aa2b))
    (fp_line (start -5.55 3.5) (end 5.55 3.5) (layer "F.CrtYd") (width 0.05) (tstamp 6b9da138-c850-46e3-ad6f-095f69067b85))
    (fp_line (start 5.55 3.5) (end 5.55 -3.5) (layer "F.CrtYd") (width 0.05) (tstamp c7cc3ae6-b38c-40f2-87e5-b86f8172c157))
    (fp_line (start 3.95 -2.7) (end 4.95 -2.7) (layer "F.Fab") (width 0.1) (tstamp 09f583b9-b913-4c9b-8926-df841ddaee05))
    (fp_line (start 4.95 -2.7) (end 4.95 2.7) (layer "F.Fab") (width 0.1) (tstamp 0d6ac13d-be30-407a-9d01-c65d9de95b18))
    (fp_line (start -4.97 1.905) (end -4.97 2.655) (layer "F.Fab") (width 0.1) (tstamp 37aa5013-81b1-439c-b5a3-c3ab04efa05e))
    (fp_line (start -1.865 -2.655) (end -4.97 -2.655) (layer "F.Fab") (width 0.1) (tstamp 4abcf401-db39-4df1-b5e7-797562574732))
    (fp_line (start 3.95 3.25) (end -2.27 3.25) (layer "F.Fab") (width 0.1) (tstamp 52199ed3-3915-4bfd-bcb2-1fa7964ca845))
    (fp_line (start -4.97 -2.655) (end -4.97 -1.905) (layer "F.Fab") (width 0.1) (tstamp 53718c43-61f1-4990-8248-09aa720fa9b3))
    (fp_line (start 3.95 -3.25) (end 3.95 3.25) (layer "F.Fab") (width 0.1) (tstamp 5c9fa1f3-d150-40ca-9fcf-961dee53a394))
    (fp_line (start -2.27 1.905) (end -4.97 1.905) (layer "F.Fab") (width 0.1) (tstamp 72176a5f-be07-482d-b140-7bb5efc80e0f))
    (fp_line (start -2.27 3.25) (end -2.27 -2.25) (layer "F.Fab") (width 0.1) (tstamp 8c7b2948-3bc5-49b0-94bf-4df025f10d23))
    (fp_line (start -4.97 2.655) (end -2.27 2.655) (layer "F.Fab") (width 0.1) (tstamp b99fd12d-af23-4635-b801-50a580e4840c))
    (fp_line (start 4.95 2.7) (end 3.95 2.7) (layer "F.Fab") (width 0.1) (tstamp f6137f44-269c-436c-b289-95082e5bf838))
    (fp_line (start -1.27 -3.25) (end 3.95 -3.25) (layer "F.Fab") (width 0.1) (tstamp fc1b2359-0987-481b-80a7-34c438587bd2))
    (fp_line (start -2.27 -2.25) (end -1.27 -3.25) (layer "F.Fab") (width 0.1) (tstamp fe2c82cc-bb7b-4c51-8fe1-acae35c7b348))
    (fp_line (start -4.97 -1.905) (end -2.27 -1.905) (layer "F.Fab") (width 0.1) (tstamp ff67e780-482a-4cf5-a048-6f7541d13dd0))
    (pad "" smd rect (at 0.425 1.525 90) (size 3.05 2.75) (layers "F.Paste") (tstamp 18cc1c25-770c-4d2d-8944-3fc3acd4d470))
    (pad "" smd rect (at 0.425 -1.525 90) (size 3.05 2.75) (layers "F.Paste") (tstamp 357d160a-6334-4cca-ad5d-21003c9fe314))
    (pad "" smd rect (at 3.775 1.525 90) (size 3.05 2.75) (layers "F.Paste") (tstamp 82c35431-1206-4583-b256-6151b0fd4f08))
    (pad "" smd rect (at 3.775 -1.525 90) (size 3.05 2.75) (layers "F.Paste") (tstamp a0056fc9-d70c-4d7b-bcd2-c75a9a4b4e35))
    (pad "1" smd rect (at -4.2 -2.28 90) (size 2.2 1.2) (layers "F.Cu" "F.Paste" "F.Mask")
      (net 2 "GND") (pinfunction "GND") (pintype "power_in") (tstamp 12c33f7b-7725-41d8-b729-9c4de489c232))
    (pad "2" smd rect (at 2.1 0 90) (size 6.4 5.8) (layers "F.Cu" "F.Mask")
      (net 3 "+3V3") (pinfunction "Out") (pintype "power_in") (tstamp ac0e5fea-c55f-4a11-80c4-0aa375ce40e2))
    (pad "3" smd rect (at -4.2 2.28 90) (size 2.2 1.2) (layers "F.Cu" "F.Paste" "F.Mask")
      (net 1 "+5V") (pinfunction "In") (pintype "power_in") (tstamp 88f26f58-3c69-412e-9a4f-17c137431857))
    (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/TO-252-2.wrl"
      (offset (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (footprint "Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical" (layer "F.Cu")
    (tedit 5A19A420) (tstamp dbefd6d6-8464-45ca-bb18-2e346d271ce2)
    (at 41.025 65.125)
    (descr "Through hole straight socket strip, 1x08, 2.54mm pitch, single row (from Kicad 4.0.7), script generated")
    (tags "Through hole socket strip THT 1x08 2.54mm single row")
    (property "Sheetfile" "esp8266-arduino-section.kicad_sch")
    (property "Sheetname" "ESP8266")
    (path "/ff3625c2-684b-47d8-96d9-4a80a872bce2/4f1eb147-c92d-41ee-b3bc-6758a0974a0c")
    (attr through_hole)
    (fp_text reference "J1" (at 0 -2.77) (layer "F.SilkS")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp bd202f8f-d7d1-407c-91e6-bb6e2572e549)
    )
    (fp_text value "D1_conn" (at 0 20.55) (layer "F.Fab")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp 3ca82085-cb57-4516-8685-e4c4c1a35537)
    )
    (fp_text user "${REFERENCE}" (at 0 8.89 90) (layer "F.Fab")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp fdfb32b0-7ffe-426f-9d80-1deb6639eb2a)
    )
    (fp_line (start 0 -1.33) (end 1.33 -1.33) (layer "F.SilkS") (width 0.12) (tstamp a325a03f-ec64-438f-b77e-a46138b7f4f0))
    (fp_line (start 1.33 1.27) (end 1.33 19.11) (layer "F.SilkS") (width 0.12) (tstamp b4f7dbf9-91ec-4cb9-beb8-40b4c6bb980a))
    (fp_line (start -1.33 19.11) (end 1.33 19.11) (layer "F.SilkS") (width 0.12) (tstamp b682cc53-43d8-4452-9cdd-67cb13d8e4dc))
    (fp_line (start -1.33 1.27) (end 1.33 1.27) (layer "F.SilkS") (width 0.12) (tstamp c3659ff7-0139-4d18-a302-5e74da500fb7))
    (fp_line (start -1.33 1.27) (end -1.33 19.11) (layer "F.SilkS") (width 0.12) (tstamp d5d81f47-dc6d-43e3-98ba-45918296feca))
    (fp_line (start 1.33 -1.33) (end 1.33 0) (layer "F.SilkS") (width 0.12) (tstamp f0fca991-2218-4334-a28c-250ad99ec98f))
    (fp_line (start -1.8 -1.8) (end 1.75 -1.8) (layer "F.CrtYd") (width 0.05) (tstamp 9e1a40c7-3380-4e5a-99c8-4de4600a5709))
    (fp_line (start 1.75 -1.8) (end 1.75 19.55) (layer "F.CrtYd") (width 0.05) (tstamp c4c7714c-2833-4796-a64e-3123a2efd2b8))
    (fp_line (start -1.8 19.55) (end -1.8 -1.8) (layer "F.CrtYd") (width 0.05) (tstamp e31abd27-764d-48a9-8d5f-5743f4dbd4d8))
    (fp_line (start 1.75 19.55) (end -1.8 19.55) (layer "F.CrtYd") (width 0.05) (tstamp fa31b13e-35ad-4424-b6a3-4fc004b92eb1))
    (fp_line (start 0.635 -1.27) (end 1.27 -0.635) (layer "F.Fab") (width 0.1) (tstamp 09d8de3e-add1-4d7a-a654-18e3c861a953))
    (fp_line (start -1.27 19.05) (end -1.27 -1.27) (layer "F.Fab") (width 0.1) (tstamp 3abb59d1-b212-4709-9356-a0fe6c25372d))
    (fp_line (start 1.27 -0.635) (end 1.27 19.05) (layer "F.Fab") (width 0.1) (tstamp 4d6ae160-2e9d-4b15-b065-dbc1f53fdad3))
    (fp_line (start -1.27 -1.27) (end 0.635 -1.27) (layer "F.Fab") (width 0.1) (tstamp 8581289e-848b-4667-9b8b-b3c12892dcf0))
    (fp_line (start 1.27 19.05) (end -1.27 19.05) (layer "F.Fab") (width 0.1) (tstamp fe9b9917-8a8b-4491-bc94-65f1486ae3f3))
    (pad "1" thru_hole rect (at 0 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 5 "/ESP8266/RST") (pinfunction "Pin_1") (pintype "passive") (tstamp 6178c56c-27df-4755-ae36-28dc0cd0bd45))
    (pad "2" thru_hole oval (at 0 2.54) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 6 "/ESP8266/A0") (pinfunction "Pin_2") (pintype "passive") (tstamp 6c4e4337-663c-42e5-b38b-1bb867eace03))
    (pad "3" thru_hole oval (at 0 5.08) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 7 "/ESP8266/GPIO16") (pinfunction "Pin_3") (pintype "passive") (tstamp c22baab2-9188-417d-90bb-020be0293159))
    (pad "4" thru_hole oval (at 0 7.62) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 8 "/ESP8266/GPIO14") (pinfunction "Pin_4") (pintype "passive") (tstamp 7c3f8cb5-5536-48a0-84c5-224a7497862f))
    (pad "5" thru_hole oval (at 0 10.16) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 9 "/ESP8266/GPIO12") (pinfunction "Pin_5") (pintype "passive") (tstamp f602febb-fda2-4465-a2ae-b161bd0d04c4))
    (pad "6" thru_hole oval (at 0 12.7) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 10 "/ESP8266/GPIO13") (pinfunction "Pin_6") (pintype "passive") (tstamp dc93ec25-5365-4ba4-a807-8c6e3d6da222))
    (pad "7" thru_hole oval (at 0 15.24) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 11 "/ESP8266/GPIO15") (pinfunction "Pin_7") (pintype "passive") (tstamp 3ff51dcb-07d7-4579-a8f7-4c4072a15ea2))
    (pad "8" thru_hole oval (at 0 17.78) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 3 "+3V3") (pinfunction "Pin_8") (pintype "passive") (tstamp 7d732868-72ff-4761-a10a-277dc649a5f2))
    (model "${KICAD6_3DMODEL_DIR}/Connector_PinSocket_2.54mm.3dshapes/PinSocket_1x08_P2.54mm_Vertical.wrl"
      (offset (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (footprint "Resistor_SMD:R_0805_2012Metric" (layer "F.Cu")
    (tedit 5F68FEEE) (tstamp ec6bb956-2ea7-4f40-b0fc-51a6cf7466f0)
    (at 55 89 90)
    (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
    (tags "resistor")
    (property "LCSC" "C17444")
    (property "Sheetfile" "esp8266-arduino-section.kicad_sch")
    (property "Sheetname" "ESP8266")
    (path "/ff3625c2-684b-47d8-96d9-4a80a872bce2/ad064b10-821a-4277-b5fd-ec0d6c87c213")
    (attr smd)
    (fp_text reference "R5" (at 0 -1.65 90) (layer "F.SilkS")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp 62f6702f-2def-4fd0-8409-4a59f5f307b2)
    )
    (fp_text value "12k" (at 0 1.65 90) (layer "F.Fab")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp 2656e9ec-ae18-446b-9e4b-4d6fa0d88a99)
    )
    (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab")
      (effects (font (size 0.5 0.5) (thickness 0.08)))
      (tstamp d9850939-a01d-44bf-8725-08cbaa1012b4)
    )
    (fp_line (start -0.227064 0.735) (end 0.227064 0.735) (layer "F.SilkS") (width 0.12) (tstamp df8efea0-7de5-40a5-852e-8e1db73f28e3))
    (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) (layer "F.SilkS") (width 0.12) (tstamp e4013d54-a277-41da-9b23-657432014a7b))
    (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer "F.CrtYd") (width 0.05) (tstamp 093c16b6-b6b4-4763-b7fa-aea46694cde5))
    (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer "F.CrtYd") (width 0.05) (tstamp 42f48a15-ca76-421e-ac1f-418504186f5f))
    (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer "F.CrtYd") (width 0.05) (tstamp 7c59aa6d-00c0-467e-b0fc-43fc53b2a33a))
    (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer "F.CrtYd") (width 0.05) (tstamp a868dc1b-f417-4423-8196-06e6ee7c2bbd))
    (fp_line (start 1 -0.625) (end 1 0.625) (layer "F.Fab") (width 0.1) (tstamp 1e00f050-9eca-4847-8678-4a663b852e79))
    (fp_line (start -1 -0.625) (end 1 -0.625) (layer "F.Fab") (width 0.1) (tstamp 2462605b-695a-4cb6-b652-b17bdd8b2943))
    (fp_line (start -1 0.625) (end -1 -0.625) (layer "F.Fab") (width 0.1) (tstamp 42c99485-e957-4729-82f8-3a9a0997a274))
    (fp_line (start 1 0.625) (end -1 0.625) (layer "F.Fab") (width 0.1) (tstamp 9f9b2464-9684-48bf-8bf2-249c27954da3))
    (pad "1" smd roundrect (at -0.9125 0 90) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902)
      (net 3 "+3V3") (pintype "passive") (tstamp 8cc57727-3ede-40b9-9e81-13bbe84f06de))
    (pad "2" smd roundrect (at 0.9125 0 90) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902)
      (net 4 "/ESP8266/EN") (pintype "passive") (tstamp 8ff076c6-716d-4f49-9264-d5291d83a71b))
    (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl"
      (offset (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (footprint "RF_Module:ESP-12E" (layer "F.Cu")
    (tedit 61FED6E0) (tstamp fcca39d5-ecb3-40d7-9302-dfc91a4355e2)
    (at 54.5 72)
    (descr "Wi-Fi Module, http://wiki.ai-thinker.com/_media/esp8266/docs/aithinker_esp_12f_datasheet_en.pdf")
    (tags "Wi-Fi Module")
    (property "LCSC" "C89297")
    (property "Sheetfile" "esp8266-arduino-section.kicad_sch")
    (property "Sheetname" "ESP8266")
    (path "/ff3625c2-684b-47d8-96d9-4a80a872bce2/17fee064-bacc-4b6e-a390-6d8694ad17a8")
    (attr smd)
    (fp_text reference "U3" (at -10.56 -5.26) (layer "F.SilkS")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp 3556eba2-8434-42eb-91d3-6ce3e3ae7f37)
    )
    (fp_text value "ESP-12E" (at -0.06 -12.78) (layer "F.Fab")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp 2710818b-9b7a-42f1-b4a4-5012463263a7)
    )
    (fp_text user "Antenna" (at -0.06 -7 180) (layer "Cmts.User")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp 0595d6a3-ac67-43fd-9e9a-8eacf23cc326)
    )
    (fp_text user "KEEP-OUT ZONE" (at 0.03 -9.55 180) (layer "Cmts.User")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp 160e4a08-fe63-4b18-822a-e646574c4fdc)
    )
    (fp_text user "${REFERENCE}" (at 0.49 -0.8) (layer "F.Fab")
      (effects (font (size 1 1) (thickness 0.15)))
      (tstamp 26acc68a-ca8d-4e7b-86ac-c89485cf2964)
    )
    (fp_line (start -6 12.12) (end -8.12 12.12) (layer "F.SilkS") (width 0.12) (tstamp 22f2f785-6273-4137-bde4-e601044b8697))
    (fp_line (start 8.12 -12.12) (end 8.12 -4.5) (layer "F.SilkS") (width 0.12) (tstamp 402877dd-2788-44fc-82a0-026b42495caa))
    (fp_line (start -8.12 -12.12) (end 8.12 -12.12) (layer "F.SilkS") (width 0.12) (tstamp 56d63a7a-1870-46c4-9cf0-49e351628007))
    (fp_line (start 8.12 11.5) (end 8.12 12.12) (layer "F.SilkS") (width 0.12) (tstamp a1641a62-3afb-4def-a3c2-fe79d33c574f))
    (fp_line (start 8.12 12.12) (end 6 12.12) (layer "F.SilkS") (width 0.12) (tstamp ac5780dc-05f0-4667-bc4e-db766eb45fc2))
    (fp_line (start -8.12 -4.5) (end -8.73 -4.5) (layer "F.SilkS") (width 0.12) (tstamp b6255a9f-99d2-40ef-b52b-63da70bf63d9))
    (fp_line (start -8.12 12.12) (end -8.12 11.5) (layer "F.SilkS") (width 0.12) (tstamp eaed34fe-2dbd-4940-9dc7-ba599be1f89c))
    (fp_line (start -8.12 -4.5) (end -8.12 -12.12) (layer "F.SilkS") (width 0.12) (tstamp ed42ab44-82cc-4d91-ac0c-3690daf42b60))
    (fp_line (start 9.05 13.1) (end -9.05 13.1) (layer "F.CrtYd") (width 0.05) (tstamp 26f1a805-98b1-48a6-a3e8-8b8aadb0a462))
    (fp_line (start 9.05 -12.2) (end 9.05 13.1) (layer "F.CrtYd") (width 0.05) (tstamp 954ebd1a-fef6-4def-909f-56f74b7dcf82))
    (fp_line (start -9.05 13.1) (end -9.05 -12.2) (layer "F.CrtYd") (width 0.05) (tstamp ebe20b3f-576a-4fc8-9fa4-006a8382e7bf))
    (fp_line (start -9.05 -12.2) (end 9.05 -12.2) (layer "F.CrtYd") (width 0.05) (tstamp fd30471a-0e77-44fc-893c-5322486f9fae))
    (fp_line (start 8 -12) (end 8 12) (layer "F.Fab") (width 0.1) (tstamp 0154f224-8e29-4f85-9edc-38c89f840393))
    (fp_line (start -7.5 -3.5) (end -8 -4) (layer "F.Fab") (width 0.1) (tstamp 23e8c6b0-4319-4e91-b1f3-c540ba45acbe))
    (fp_line (start -8 -4) (end -8 -12) (layer "F.Fab") (width 0.1) (tstamp 346c227c-ddd2-4e84-b8ff-a15c34114995))
    (fp_line (start -8 12) (end -8 -3) (layer "F.Fab") (width 0.1) (tstamp 39e31ab1-f907-42fc-bcd1-4377c2c58970))
    (fp_line (start -8 -12) (end 8 -12) (layer "F.Fab") (width 0.1) (tstamp 5a6874e7-37c7-4c70-9083-918e283a59c7))
    (fp_line (start 8 12) (end -8 12) (layer "F.Fab") (width 0.1) (tstamp 89248fca-f141-4d62-84d1-74b4524160a5))
    (fp_line (start -8 -3) (end -7.5 -3.5) (layer "F.Fab") (width 0.1) (tstamp c1887932-61ff-4436-9c44-178f45e39e23))
    (pad "1" smd rect (at -7.6 -3.5) (size 2.5 1) (layers "F.Cu" "F.Paste" "F.Mask")
      (net 5 "/ESP8266/RST") (pinfunction "~{RST}") (pintype "input") (tstamp 86174420-8639-4a85-9b5c-b1160af58c16))
    (pad "2" smd rect (at -7.6 -1.5) (size 2.5 1) (layers "F.Cu" "F.Paste" "F.Mask")
      (net 28 "/ESP8266/ADC") (pinfunction "ADC") (pintype "input") (tstamp 875e14e4-94b4-46d7-8591-eaf56f92cd9d))
    (pad "3" smd rect (at -7.6 0.5) (size 2.5 1) (layers "F.Cu" "F.Paste" "F.Mask")
      (net 4 "/ESP8266/EN") (pinfunction "EN") (pintype "input") (tstamp f417a153-da5f-4ef3-94cf-16b8bbf3c019))
    (pad "4" smd rect (at -7.6 2.5) (size 2.5 1) (layers "F.Cu" "F.Paste" "F.Mask")
      (net 7 "/ESP8266/GPIO16") (pinfunction "GPIO16") (pintype "bidirectional") (tstamp f69f26fb-db02-4f6c-b12a-4d7521c34a92))
    (pad "5" smd rect (at -7.6 4.5) (size 2.5 1) (layers "F.Cu" "F.Paste" "F.Mask")
      (net 8 "/ESP8266/GPIO14") (pinfunction "GPIO14") (pintype "bidirectional") (tstamp 743cc05b-391f-4663-8bb6-f2173af94944))
    (pad "6" smd rect (at -7.6 6.5) (size 2.5 1) (layers "F.Cu" "F.Paste" "F.Mask")
      (net 9 "/ESP8266/GPIO12") (pinfunction "GPIO12") (pintype "bidirectional") (tstamp 5da244a2-fcba-4cb7-a070-d101bedf4af0))
    (pad "7" smd rect (at -7.6 8.5) (size 2.5 1) (layers "F.Cu" "F.Paste" "F.Mask")
      (net 10 "/ESP8266/GPIO13") (pinfunction "GPIO13") (pintype "bidirectional") (tstamp 12a9c4cc-aab2-43d8-a871-0678c5366513))
    (pad "8" smd rect (at -7.6 10.5) (size 2.5 1) (layers "F.Cu" "F.Paste" "F.Mask")
      (net 3 "+3V3") (pinfunction "VCC") (pintype "power_in") (tstamp efc5f1a6-5a6c-48a8-a2ad-23f0f5fd0da0))
    (pad "9" smd rect (at -5 12) (size 1 1.8) (layers "F.Cu" "F.Paste" "F.Mask")
      (net 36 "unconnected-(U3-Pad9)") (pinfunction "CS0") (pintype "input+no_connect") (tstamp e0cfb0eb-5971-4409-a070-8dce68a7c33b))
    (pad "10" smd rect (at -3 12) (size 1 1.8) (layers "F.Cu" "F.Paste" "F.Mask")
      (net 37 "unconnected-(U3-Pad10)") (pinfunction "MISO") (pintype "bidirectional+no_connect") (tstamp 892757dd-7475-4b4c-adca-bab837acc3d2))
    (pad "11" smd rect (at -1 12) (size 1 1.8) (layers "F.Cu" "F.Paste" "F.Mask")
      (net 38 "unconnected-(U3-Pad11)") (pinfunction "GPIO9") (pintype "bidirectional+no_connect") (tstamp 5dec0c13-fad4-4352-ae47-6f47345c5bde))
    (pad "12" smd rect (at 1 12) (size 1 1.8) (layers "F.Cu" "F.Paste" "F.Mask")
      (net 39 "unconnected-(U3-Pad12)") (pinfunction "GPIO10") (pintype "bidirectional+no_connect") (tstamp c7ece955-6e99-45b5-b52f-ba89596bf43c))
    (pad "13" smd rect (at 3 12) (size 1 1.8) (layers "F.Cu" "F.Paste" "F.Mask")
      (net 40 "unconnected-(U3-Pad13)") (pinfunction "MOSI") (pintype "bidirectional+no_connect") (tstamp bb4b1f27-ab5a-4bea-8fc3-7223e28af69b))
    (pad "14" smd rect (at 5 12) (size 1 1.8) (layers "F.Cu" "F.Paste" "F.Mask")
      (net 41 "unconnected-(U3-Pad14)") (pinfunction "SCLK") (pintype "bidirectional+no_connect") (tstamp 4ce4bf50-5c77-4c5d-a0ee-ed9a4794ecf5))
    (pad "15" smd rect (at 7.6 10.5) (size 2.5 1) (layers "F.Cu" "F.Paste" "F.Mask")
      (net 2 "GND") (pinfunction "GND") (pintype "power_in") (tstamp 43d6e979-6354-4eeb-b0af-12ee7a9bfaa9))
    (pad "16" smd rect (at 7.6 8.5) (size 2.5 1) (layers "F.Cu" "F.Paste" "F.Mask")
      (net 11 "/ESP8266/GPIO15") (pinfunction "GPIO15") (pintype "bidirectional") (tstamp 166d3239-19a1-41d1-83c7-c787ae0131ba))
    (pad "17" smd rect (at 7.6 6.5) (size 2.5 1) (layers "F.Cu" "F.Paste" "F.Mask")
      (net 14 "/ESP8266/GPIO2") (pinfunction "GPIO2") (pintype "bidirectional") (tstamp a442bfc1-55d5-4ee9-992c-6f295d947527))
    (pad "18" smd rect (at 7.6 4.5) (size 2.5 1) (layers "F.Cu" "F.Paste" "F.Mask")
      (net 15 "/ESP8266/GPIO0") (pinfunction "GPIO0") (pintype "bidirectional") (tstamp 00a1f329-a8a4-430c-a3bc-eca54b1901ed))
    (pad "19" smd rect (at 7.6 2.5) (size 2.5 1) (layers "F.Cu" "F.Paste" "F.Mask")
      (net 12 "/ESP8266/GPIO4{slash}SDA") (pinfunction "GPIO4") (pintype "bidirectional") (tstamp ace31972-c509-482d-b5b3-d0c0bd137c0d))
    (pad "20" smd rect (at 7.6 0.5) (size 2.5 1) (layers "F.Cu" "F.Paste" "F.Mask")
      (net 13 "/ESP8266/GPIO5{slash}SCL") (pinfunction "GPIO5") (pintype "bidirectional") (tstamp e32299f1-9b06-4e36-addc-b96d286f6774))
    (pad "21" smd rect (at 7.6 -1.5) (size 2.5 1) (layers "F.Cu" "F.Paste" "F.Mask")
      (net 16 "/ESP8266/RX") (pinfunction "GPIO3/RXD") (pintype "bidirectional") (tstamp 4f33fc88-e9da-400d-a302-26d4fc48f319))
    (pad "22" smd rect (at 7.6 -3.5) (size 2.5 1) (layers "F.Cu" "F.Paste" "F.Mask")
      (net 17 "/ESP8266/TX") (pinfunction "GPIO1/TXD") (pintype "bidirectional") (tstamp efa0dc0e-5dbe-4dfe-8403-c3a4ff3a6542))
    (zone (net 0) (net_name "") (layers *.Cu) (tstamp a9f49fcb-96f6-4054-a849-77d36b96e3b7) (hatch full 0.508)
      (connect_pads (clearance 0))
      (min_thickness 0.254)
      (keepout (tracks not_allowed) (vias not_allowed) (pads not_allowed ) (copperpour not_allowed) (footprints not_allowed))
      (fill (thermal_gap 0.508) (thermal_bridge_width 0.508))
      (polygon
        (pts
          (xy 46.38 67.2)
          (xy 62.62 67.2)
          (xy 62.62 59.88)
          (xy 46.38 59.88)
        )
      )
    )
    (model "${KICAD6_3DMODEL_DIR}/RF_Module.3dshapes/ESP-12E.wrl"
      (offset (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (footprint "Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm" (layer "B.Cu")
    (tedit 5C745284) (tstamp 11d95334-729c-4973-9c28-60a9cc8e20f6)
    (at 67 98.65 -90)
    (descr "SMD Solder Jumper, 1x1.5mm, rounded Pads, 0.3mm gap, bridged with 1 copper strip")
    (tags "net tie solder jumper bridged")
    (property "Sheetfile" "esp8266-arduino-section.kicad_sch")
    (property "Sheetname" "ESP8266")
    (path "/ff3625c2-684b-47d8-96d9-4a80a872bce2/dfff283f-f69f-44e3-8380-b7da5fe11f51")
    (attr exclude_from_pos_files)
    (fp_text reference "JP2" (at 0 1.8 90) (layer "B.SilkS")
      (effects (font (size 1 1) (thickness 0.15)) (justify mirror))
      (tstamp 1a1e6589-1de9-4197-a111-91db60bb9ef8)
    )
    (fp_text value "SolderJumper_2_Bridged" (at -1 0.1 90) (layer "B.Fab")
      (effects (font (size 1 1) (thickness 0.15)) (justify mirror))
      (tstamp 83fb0960-2406-4b55-9690-1bc90a10648b)
    )
    (fp_poly (pts
        (xy 0.25 0.3)
        (xy -0.25 0.3)
        (xy -0.25 -0.3)
        (xy 0.25 -0.3)
      ) (layer "B.Cu") (width 0) (fill solid) (tstamp 1bd9ab7a-6c74-47ba-8a78-16e668481f85))
    (fp_line (start 0.7 -1) (end -0.7 -1) (layer "B.SilkS") (width 0.12) (tstamp 3668df08-5b0f-46a3-a9b4-c2993a45e4d5))
    (fp_line (start -0.7 1) (end 0.7 1) (layer "B.SilkS") (width 0.12) (tstamp 9b3dc325-fc6a-4d41-a36c-732a77042403))
    (fp_line (start 1.4 0.3) (end 1.4 -0.3) (layer "B.SilkS") (width 0.12) (tstamp ee8bf931-0eba-4bb0-8b40-de735885a546))
    (fp_line (start -1.4 -0.3) (end -1.4 0.3) (layer "B.SilkS") (width 0.12) (tstamp fcff23a9-11b6-4472-8330-ef3e9c069e76))
    (fp_arc (start 0.7 -1) (mid 1.194975 -0.794975) (end 1.4 -0.3) (layer "B.SilkS") (width 0.12) (tstamp 336b67df-2941-4adb-b3ca-4cff3acba437))
    (fp_arc (start -0.7 1) (mid -1.194975 0.794975) (end -1.4 0.3) (layer "B.SilkS") (width 0.12) (tstamp 5e36434e-2104-4fd8-a9c8-c8077df62efb))
    (fp_arc (start -1.4 -0.3) (mid -1.194975 -0.794975) (end -0.7 -1) (layer "B.SilkS") (width 0.12) (tstamp 9f636e1b-a3a7-4c62-ab94-8eaef6f90d41))
    (fp_arc (start 1.4 0.3) (mid 1.194975 0.794975) (end 0.7 1) (layer "B.SilkS") (width 0.12) (tstamp bbe26b02-b51e-45d3-b9dd-7f8f24895303))
    (fp_line (start 1.65 -1.25) (end 1.65 1.25) (layer "B.CrtYd") (width 0.05) (tstamp 6f1c81f7-2358-4678-a24a-30f1a3b4f0bb))
    (fp_line (start 1.65 -1.25) (end -1.65 -1.25) (layer "B.CrtYd") (width 0.05) (tstamp 752b5feb-80ba-45dc-8906-a731fc2d44bb))
    (fp_line (start -1.65 1.25) (end 1.65 1.25) (layer "B.CrtYd") (width 0.05) (tstamp 7b35e77e-68e4-490f-9965-e1cfebfa41f8))
    (fp_line (start -1.65 1.25) (end -1.65 -1.25) (layer "B.CrtYd") (width 0.05) (tstamp eb2918bf-5c41-47c0-838f-2d46704a4540))
    (pad "1" smd custom (at -0.65 0 270) (size 1 0.5) (layers "B.Cu" "B.Mask")
      (net 12 "/ESP8266/GPIO4{slash}SDA") (pinfunction "A") (pintype "passive") (zone_connect 2)
      (options (clearance outline) (anchor rect))
      (primitives
        (gr_circle (center 0 -0.25) (end 0.5 -0.25) (width 0) (fill yes))
        (gr_circle (center 0 0.25) (end 0.5 0.25) (width 0) (fill yes))
        (gr_poly (pts
            (xy 0.5 -0.75)
            (xy 0 -0.75)
            (xy 0 0.75)
            (xy 0.5 0.75)
          ) (width 0) (fill yes))
      ) (tstamp d4d727b9-8473-4d7c-9e9f-8aa77a7e68d5))
    (pad "2" smd custom (at 0.65 0 270) (size 1 0.5) (layers "B.Cu" "B.Mask")
      (net 25 "Net-(JP2-Pad2)") (pinfunction "B") (pintype "passive") (zone_connect 2)
      (options (clearance outline) (anchor rect))
      (primitives
        (gr_circle (center 0 -0.25) (end 0.5 -0.25) (width 0) (fill yes))
        (gr_circle (center 0 0.25) (end 0.5 0.25) (width 0) (fill yes))
        (gr_poly (pts
            (xy 0 -0.75)
            (xy -0.5 -0.75)
            (xy -0.5 0.75)
            (xy 0 0.75)
          ) (width 0) (fill yes))
      ) (tstamp 210f9b56-cea4-4d92-8d3e-2f782995574a))
  )

  (footprint "Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm" (layer "B.Cu")
    (tedit 5C745284) (tstamp a810c4ba-74f7-4bf5-a6b2-eb0b5e0a468f)
    (at 67 102 -90)
    (descr "SMD Solder Jumper, 1x1.5mm, rounded Pads, 0.3mm gap, bridged with 1 copper strip")
    (tags "net tie solder jumper bridged")
    (property "Sheetfile" "esp8266-arduino-section.kicad_sch")
    (property "Sheetname" "ESP8266")
    (path "/ff3625c2-684b-47d8-96d9-4a80a872bce2/7b717240-b501-4c10-b384-aa0d663e40b5")
    (attr exclude_from_pos_files)
    (fp_text reference "JP1" (at 0 1.8 90) (layer "B.SilkS")
      (effects (font (size 1 1) (thickness 0.15)) (justify mirror))
      (tstamp 1c695c73-6684-4afb-b99e-113827452611)
    )
    (fp_text value "SolderJumper_2_Bridged" (at -1 0.1 90) (layer "B.Fab")
      (effects (font (size 1 1) (thickness 0.15)) (justify mirror))
      (tstamp 144f5425-28ea-4145-bbe2-b6afa42770c3)
    )
    (fp_poly (pts
        (xy 0.25 0.3)
        (xy -0.25 0.3)
        (xy -0.25 -0.3)
        (xy 0.25 -0.3)
      ) (layer "B.Cu") (width 0) (fill solid) (tstamp 8b3ab73e-a9a1-4f68-bb1a-8e9b48b6c601))
    (fp_line (start -1.4 -0.3) (end -1.4 0.3) (layer "B.SilkS") (width 0.12) (tstamp 31c0a2a0-0496-4d09-93a4-fb79a3c90645))
    (fp_line (start 1.4 0.3) (end 1.4 -0.3) (layer "B.SilkS") (width 0.12) (tstamp 583f492d-def2-4116-86c2-bd80612fab2f))
    (fp_line (start -0.7 1) (end 0.7 1) (layer "B.SilkS") (width 0.12) (tstamp a092bd9d-5530-44fc-a2c6-9b7e46ddcf64))
    (fp_line (start 0.7 -1) (end -0.7 -1) (layer "B.SilkS") (width 0.12) (tstamp a71c4569-3342-41d5-90a3-20192ce2dada))
    (fp_arc (start -0.7 1) (mid -1.194975 0.794975) (end -1.4 0.3) (layer "B.SilkS") (width 0.12) (tstamp 23571ebb-532c-4891-ad2a-c6e15c4f2b9d))
    (fp_arc (start 1.4 0.3) (mid 1.194975 0.794975) (end 0.7 1) (layer "B.SilkS") (width 0.12) (tstamp 4140de27-203d-4dfe-93d4-ea7ac9e04f60))
    (fp_arc (start -1.4 -0.3) (mid -1.194975 -0.794975) (end -0.7 -1) (layer "B.SilkS") (width 0.12) (tstamp 4bddd06a-4eef-49f6-a935-7f11f01416b5))
    (fp_arc (start 0.7 -1) (mid 1.194975 -0.794975) (end 1.4 -0.3) (layer "B.SilkS") (width 0.12) (tstamp e8a8ed8b-6b52-4dd1-8339-08c4e3f2d3c5))
    (fp_line (start 1.65 -1.25) (end 1.65 1.25) (layer "B.CrtYd") (width 0.05) (tstamp 684e3727-00b2-49d9-aaa3-8c26e1c73bd4))
    (fp_line (start -1.65 1.25) (end -1.65 -1.25) (layer "B.CrtYd") (width 0.05) (tstamp 89050600-6fde-4502-8ddc-130eebc2d62e))
    (fp_line (start 1.65 -1.25) (end -1.65 -1.25) (layer "B.CrtYd") (width 0.05) (tstamp ae1a45ee-20e6-4a90-ba01-e89c74a350b6))
    (fp_line (start -1.65 1.25) (end 1.65 1.25) (layer "B.CrtYd") (width 0.05) (tstamp fcc20b3d-e35d-42ef-9fb0-0e2b279ceb81))
    (pad "1" smd custom (at -0.65 0 270) (size 1 0.5) (layers "B.Cu" "B.Mask")
      (net 13 "/ESP8266/GPIO5{slash}SCL") (pinfunction "A") (pintype "passive") (zone_connect 2)
      (options (clearance outline) (anchor rect))
      (primitives
        (gr_circle (center 0 -0.25) (end 0.5 -0.25) (width 0) (fill yes))
        (gr_circle (center 0 0.25) (end 0.5 0.25) (width 0) (fill yes))
        (gr_poly (pts
            (xy 0.5 -0.75)
            (xy 0 -0.75)
            (xy 0 0.75)
            (xy 0.5 0.75)
          ) (width 0) (fill yes))
      ) (tstamp 462fc91a-f48e-427c-805d-d89d163794f4))
    (pad "2" smd custom (at 0.65 0 270) (size 1 0.5) (layers "B.Cu" "B.Mask")
      (net 24 "Net-(JP1-Pad2)") (pinfunction "B") (pintype "passive") (zone_connect 2)
      (options (clearance outline) (anchor rect))
      (primitives
        (gr_circle (center 0 -0.25) (end 0.5 -0.25) (width 0) (fill yes))
        (gr_circle (center 0 0.25) (end 0.5 0.25) (width 0) (fill yes))
        (gr_poly (pts
            (xy 0 -0.75)
            (xy -0.5 -0.75)
            (xy -0.5 0.75)
            (xy 0 0.75)
          ) (width 0) (fill yes))
      ) (tstamp 39675a09-e4a8-4dc7-9728-0a6cee86b860))
  )

)