Scan patterns:
'; scanAutoInfoStr += 'auto(1): optimized for Rayfams and Opods, fleets will move max 1 field (straight or diagonally)auto(1+): the same, but when the fleet wants to move to a new area, it can also move +1 sector when moving straight (if this sector yields a better chance)
auto(1,2hv): optimized for Rangers, will move max 1 field diagonally or 2 fields straight (horizontally or vertically).
auto(1,2hv+): the same, but when the fleet wants to move to a new area, it can also move +1 field, even if the movement lasts slightly longer than the scan cooldown (e.g. X+1, Y-2)
auto(1,2hv++): The same, but when moving to a new area, fleets can move up to 2 fields diagonally (e.g. X+2 and Y-2)
'; scanAutoInfoStr += '
Settings:
'; scanAutoInfoStr += 'Search dist: Limits the search distance around the current fleet position when looking for a good new target area (dist is applied to X and Y, so it results in a square area)'; scanAutoInfoStr += 'Cluster/distance: The smaller, the more large clusters far away are preferred, even if the distance is large. Try the default first, then you can try to make small changes. Values: 0 to 100
'; scanAutoInfoStr += 'Neighbor min good: If less good fields can be found in the 5x5 square around the fleet, move to a new target area
'; scanAutoInfoStr += 'Check % c/d left: If at least % of the cooldown is left (e.g. 40 = 40%), constantly check if the current sector turns bad (e.g. because another concurrent fleet found SDUs in this sector) and immediately move on if this is the case.
'; scanAutoInfoStr += 'Prob: The probability threshold for the previous setting (e.g. 5 = 5%). So when you set it to e.g. 5% and the sector chance drops to 3% while the fleet is still in cooldown, the fleet will move on.
'; scanAutoInfoStr += 'Bypass %: If an adjacent field has a chance higher than the actual field the fleet wants to move to, move to this "bypass" field instead, even if the distance is slightly larger (e.g. 5 = 5%, so if the fleet wants to move to a field with 3%, but a bypass field has a chance of 8% or more, it uses the bypass field).
'; scanAutoInfoStr += 'Target: When departing from the SB, the fleet will always start at this sector.
'; scanAutoInfoStr += 'Override Length: Defines the area around the fleet target sector where the fleet can operate within. Should be at least 15, better more, so the fleet has enough room. (e.g. fleet target = 0,0 and override length=20 means a square from -20, -20 to 20,20)
'; scanAutoInfoStr += 'Minimum probability: The algo tries to find fields with at least this chance (these fields count as a "good" field)
'; scanAutoInfoStr += 'Home at fuel/dist %: After each movement the fleet checks the fuel that is needed to reach the home base. If you enter a value larger than 100 here (e.g. 130 = 130%) and the fleet has less than 130% of the fuel needed for the way back, it will start moving towards the home base and scan along. It can move up to 2 fields (essentially it uses the "auto(1,2hv++)" pattern now), then it scans, then it moves again. It will still try to find better bypass fields while moving. It only works for fleets that are running out of fuel before running out of cargo space.
'; let commonInfoStr = 'You can enter amounts with the suffixes K, M and G. So e.g. "1M" equals "1000000".
The "Clean" button will clean up your config file and will remove all fleets that are not shown in the table below (do a backup before!).
The "Download" button will save/backup your current config to a file.
If something goes wrong, you can import the backup later and paste it in the "Import" textbox.'; assistModalContent.innerHTML = '
SLYA v' + GM_info.script.version + '
(Info
'+commonInfoStr+'
/ Auto scan'+scanAutoInfoStr+'
) ✕
| Fleet | Assignment | Target | Starbase | Warp/Subwarp | Max Cargo | Max Ammo | Max Fuel |
Crafting
| Starbase | Crew | Item | Max Amount | If stock is below | Use special ingredient |
✕
';
settingsModalContentString += ' 
SLY Assistant v' + GM_info.script.version + ' ';
settingsModalContent.innerHTML = settingsModalContentString;
settingsModal.append(settingsModalContent);
let importModal = document.createElement('div');
importModal.classList.add('assist-modal');
importModal.id = 'importModal';
importModal.style.display = 'none';
importModal.style.zIndex = 3;
let importModalContent = document.createElement('div');
importModalContent.classList.add('assist-modal-content');
importModalContent.innerHTML = '';
importModal.append(importModalContent);
let errorModal = document.createElement('div');
errorModal.classList.add('assist-modal');
errorModal.id = 'errorModal';
errorModal.style.display = 'none';
errorModal.style.zIndex = 3;
let errorModalContent = document.createElement('div');
errorModalContent.classList.add('assist-modal-content');
errorModalContent.innerHTML = '
'; errorModal.append(errorModalContent); let profileModal = document.createElement('div'); profileModal.classList.add('assist-modal'); profileModal.id = 'profileModal'; profileModal.style.display = 'none'; profileModal.style.zIndex = 3; let profileModalContent = document.createElement('div'); profileModalContent.classList.add('assist-modal-content'); profileModalContent.innerHTML = '
'
assistStatus.append(assistStatusContent);
//statsadd start
let assistStats = document.createElement('div');
assistStats.id = 'assistStats';
assistStats.style.display = 'none';
let assistStatsContent = document.createElement('div');
assistStatsContent.classList.add('assist-status-content');
assistStatsContent.innerHTML = '
'
assistStarbaseStatus.append(assistStarbaseStatusContent);
let assistCheck = document.createElement('div')
assistCheck.id = 'assistCheck'
assistCheck.style.display = 'none'
let assistCheckContent = document.createElement('div')
//assistCheckContent.classList.add('assist-check-content');
assistCheckContent.innerHTML = '';
assistCheck.append(assistCheckContent)
let autoContainer = document.createElement('div');
autoContainer.style.display = 'flex';
autoContainer.style.flexDirection = 'row';
let autoTitle = document.createElement('span');
autoTitle.innerHTML = 'SLYA';
autoTitle.style.fontSize = '14px';
let autoButton = document.createElement('button');
autoButton.id = 'autoScanBtn';
autoButton.classList.add('assist-btn');
autoButton.style.marginRight = '5px';
//autoButton.style.position = 'absolute';
//autoButton.style.left = '50%';
//autoButton.style.transform = 'translate(-50%, 0)';
autoButton.addEventListener('click', function(e) {toggleAssistant();});
let autoBtnSpan = document.createElement('span');
autoBtnSpan.innerText = initComplete == true ? enableAssistant === true ? 'Stop' : 'Start' : 'Wait...';
autoBtnSpan.style.fontSize = '14px';
autoButton.appendChild(autoBtnSpan);
let dropdown = document.createElement('div');
dropdown.classList.add('dropdown');
let dropdownBtn = document.createElement('button');
dropdownBtn.style.marginRight = '5px';
dropdownBtn.classList.add('assist-btn');
dropdownBtn.innerText = 'Tools';
dropdownBtn.addEventListener('click', function () {
dropdown.classList.toggle('show');
})
dropdown.addEventListener('click', function() {
dropdown.classList.remove('show');
});
let assistSettingsButton = document.createElement('button');
assistSettingsButton.id = 'assistSettingsBtn';
assistSettingsButton.classList.add('assist-btn','assist-btn-alt');
assistSettingsButton.addEventListener('click', function(e) {settingsModalToggle();});
let assistSettinsSpan = document.createElement('span');
assistSettinsSpan.innerText = 'Settings';
assistSettinsSpan.style.fontSize = '14px';
assistSettingsButton.appendChild(assistSettinsSpan);
let assistConfigButton = document.createElement('button');
assistConfigButton.id = 'assistConfigBtn';
assistConfigButton.classList.add('assist-btn');
assistConfigButton.style.marginRight = '5px';
assistConfigButton.addEventListener('click', function(e) {assistModalToggle();});
let assistConfigSpan = document.createElement('span');
assistConfigSpan.innerText = 'Wait...';
assistConfigSpan.style.fontSize = '14px';
assistConfigButton.appendChild(assistConfigSpan);
let assistCheckButton = document.createElement('button');
assistCheckButton.id = 'assistCheckBtn';
assistCheckButton.classList.add('assist-btn','assist-btn-alt');
assistCheckButton.addEventListener('click', function(e) {assistCheckToggle();});
let assistCheckSpan = document.createElement('span');
assistCheckSpan.innerText = 'Surveillance';
assistCheckSpan.style.fontSize = '14px';
assistCheckButton.appendChild(assistCheckSpan);
let assistStatusButton = document.createElement('button');
assistStatusButton.id = 'assistStatusBtn';
assistStatusButton.classList.add('assist-btn','assist-btn-alt');
assistStatusButton.addEventListener('click', function(e) {assistStatusToggle();});
let assistStatusSpan = document.createElement('span');
assistStatusSpan.innerText = 'Status';
assistStatusSpan.style.fontSize = '14px';
assistStatusButton.appendChild(assistStatusSpan);
//statsadd
let assistStatsButton = document.createElement('button');
assistStatsButton.id = 'assistStatsBtn';
assistStatsButton.classList.add('assist-btn','assist-btn-alt');
assistStatsButton.addEventListener('click', function(e) {assistStatToggle('#assistStats');});
let assistStatsSpan = document.createElement('span');
assistStatsSpan.innerText = 'Statistics';
assistStatsSpan.style.fontSize = '14px';
assistStatsButton.appendChild(assistStatsSpan);
//statsadd
let assistErrorButton = document.createElement('button');
assistErrorButton.id = 'assistErrorBtn';
assistErrorButton.classList.add('assist-btn','assist-btn-alt');
assistErrorButton.addEventListener('click', function(e) {assistErrorToggle();});
let assistErrorSpan = document.createElement('span');
assistErrorSpan.innerText = 'Error log';
assistErrorSpan.style.fontSize = '14px';
assistErrorButton.appendChild(assistErrorSpan);
let assistStarbaseStatusButton = document.createElement('button');
assistStarbaseStatusButton.id = 'assistStarbaseStatusBtn';
assistStarbaseStatusButton.classList.add('assist-btn','assist-btn-alt');
assistStarbaseStatusButton.addEventListener('click', function(e) {assistStarbaseStatusToggle();});
let assistStarbaseStatusSpan = document.createElement('span');
assistStarbaseStatusSpan.innerText = 'Starbase Status';
assistStarbaseStatusSpan.style.fontSize = '14px';
assistStarbaseStatusButton.appendChild(assistStarbaseStatusSpan);
autoContainer.appendChild(autoTitle);
autoContainer.appendChild(autoButton);
autoContainer.appendChild(assistConfigButton);
autoContainer.appendChild(dropdownBtn);
autoContainer.appendChild(dropdown);
dropdown.appendChild(assistStatusButton);
dropdown.appendChild(assistStarbaseStatusButton);
dropdown.appendChild(assistCheckButton);
dropdown.appendChild(assistStatsButton); //statsadd
//dropdown.appendChild(assistConfigButton);
dropdown.appendChild(assistSettingsButton);
dropdown.appendChild(assistErrorButton);
let targetElem = document.querySelector('body');
if (observer) {
autoContainer.id = 'assistContainer';
targetElem = document.querySelector('#root > div:first-of-type > div:first-of-type > div > header > h1');
targetElem.style.fontSize = '18px';
targetElem.append(assistCSS);
let accountManagerContainer = document.getElementById("accountManagerContainer");
let accountManagerBtn = document.getElementById("accountManagerBtn");
if (accountManagerContainer && accountManagerBtn) {
autoContainer = accountManagerContainer;
accountManagerContainer.insertBefore(autoButton, accountManagerBtn);
accountManagerContainer.insertBefore(assistConfigButton, accountManagerBtn);
accountManagerContainer.insertBefore(dropdownBtn, accountManagerBtn);
accountManagerContainer.insertBefore(dropdown, accountManagerBtn);
} else {
targetElem.append(autoContainer);
}
} else {
autoContainer.id = 'assistContainerIso';
let accountManagerContainer = document.getElementById("accountManagerContainerIso");
let accountManagerBtn = document.getElementById("accountManagerBtn");
if (accountManagerContainer && accountManagerBtn) {
autoContainer = accountManagerContainer;
accountManagerContainer.insertBefore(autoButton, accountManagerBtn);
accountManagerContainer.insertBefore(assistConfigButton, accountManagerBtn);
accountManagerContainer.insertBefore(dropdownBtn, accountManagerBtn);
accountManagerContainer.insertBefore(dropdown, accountManagerBtn);
} else {
targetElem.prepend(autoContainer);
}
targetElem.prepend(assistCSS);
}
// these were originally attached to targetElem
autoContainer.append(assistModal);
autoContainer.append(settingsModal);
autoContainer.append(assistStatus);
autoContainer.append(assistStarbaseStatus);
autoContainer.append(assistCheck);
autoContainer.append(assistStats); //statsadd
autoContainer.append(importModal);
autoContainer.append(errorModal);
autoContainer.append(profileModal);
//autoContainer.append(addAcctModal);
let assistModalClose = document.querySelector('#assistModal .assist-modal-close');
assistModalClose.addEventListener('click', function(e) {assistModalToggle();});
let assistModalSave = document.querySelector('#assistModal .assist-modal-save');
assistModalSave.addEventListener('click', function(e) {saveAssistInput();});
let settingsModalSave = document.querySelector('#settingsModal .assist-modal-save');
settingsModalSave.addEventListener('click', function(e) {saveSettingsInput();});
let settingsModalClose = document.querySelector('#settingsModal .assist-modal-close');
settingsModalClose.addEventListener('click', function(e) {settingsModalToggle();});
let assistStatusClose = document.querySelector('#assistStatus .assist-modal-close');
assistStatusClose.addEventListener('click', function(e) {assistStatusToggle();});
let assistStarbaseStatusClose = document.querySelector('#assistStarbaseStatus .assist-modal-close');
assistStarbaseStatusClose.addEventListener('click', function(e) {assistStarbaseStatusToggle();});
let assistCheckClose = document.querySelector('#assistCheck .assist-modal-close');
assistCheckClose.addEventListener('click', function(e) {assistCheckToggle();});
let assistCheckFleetBtn = document.querySelector('#checkFleetBtn');
assistCheckFleetBtn.addEventListener('click', function(e) {getFleetCntAtCoords();});
let assistStatsClose = document.querySelector('#assistStats .assist-modal-close'); //statsadd
assistStatsClose.addEventListener('click', function(e) {assistStatToggle('#assistStats');}); //statsadd
let assistStatsReset = document.querySelector('#assistStats #assist-stats-reset'); //statsadd
assistStatsReset.addEventListener('click', function(e) { transactionStats={ "start": (Math.round(Date.now() / 1000)), "groups":{} }; solanaReadCount = 0; solanaWriteCount = 0; document.querySelector('#assistStatsContent').innerHTML=''; }); //statsadd
let configImportExport = document.querySelector('#configImportExport');
configImportExport.addEventListener('click', function(e) {assistImportToggle();});
let configImport = document.querySelector('#importConfigBtn');
configImport.addEventListener('click', function(e) {saveConfigImport();});
let targetsImport = document.querySelector('#importTargetsBtn');
targetsImport.addEventListener('click', function(e) {saveTargetsImport();});
let cleanBtn = document.querySelector('#cleanBtn');
cleanBtn.addEventListener('click', function(e) {handleClean();});
let undockAllBtn = document.querySelector('#undockAllBtn');
undockAllBtn.addEventListener('click', function(e) {handleUndockAll();});
//let addAcctBtn = document.querySelector('#addAcctBtn');
//addAcctBtn.addEventListener('click', function(e) {addKeyToProfile(document.querySelector('#addAcctDiv').value);});
//let removeAcctBtn = document.querySelector('#removeAcctBtn');
//removeAcctBtn.addEventListener('click', function(e) {removeKeyFromProfile();});
let configImportClose = document.querySelector('#importModal .assist-modal-close');
configImportClose.addEventListener('click', function(e) {assistImportToggle();});
let assistErrorClose = document.querySelector('#errorModal .assist-modal-close');
assistErrorClose.addEventListener('click', function(e) {assistErrorToggle();});
let assistErrorClearBtn = document.querySelector('#clearBtn');
assistErrorClearBtn.addEventListener('click', function(e) {clearErrors();});
let assistErrorReloadBtn = document.querySelector('#reloadLogBtn');
assistErrorReloadBtn.addEventListener('click', function(e) {reloadErrors();});
let emailInterfaceTestButton = document.querySelector('#emailInterfaceTest');
emailInterfaceTestButton.addEventListener('click', function(e) {emailInterfaceTest();});
let disableLoadOtherFleetsButton = document.querySelector('#disableLoadOtherFleets');
disableLoadOtherFleetsButton.addEventListener('click', function(e) {
const sageConfig = localStorage.getItem('sage-labs-settings');
let sageConfigParsed = JSON.parse(sageConfig);
sageConfigParsed.loadOtherFleets = false;
localStorage.setItem('sage-labs-settings', JSON.stringify(sageConfigParsed));
disableLoadOtherFleetsButton.innerHTML = 'Settings updated!';
setTimeout(() => { disableLoadOtherFleetsButton.innerHTML = 'Disable "Load other fleets"'; }, 2000);
});
let downloadConfigButton = document.querySelector('#downloadConfig');
downloadConfigButton.addEventListener('click', async () => {
await exportConfigToTextarea();
var textToSave = document.querySelector('#importText').value;
var hiddenElement = document.createElement('a');
var blob = new Blob([textToSave], { type: 'application/json' });
hiddenElement.href = window.URL.createObjectURL(blob);
hiddenElement.target = '_blank';
let curDate = new Date();
var dateString = curDate.getFullYear() + "-" + ("0"+(curDate.getMonth()+1)).slice(-2) + "-" + ("0" + curDate.getDate()).slice(-2) + "-" + ("0" + curDate.getHours()).slice(-2) + "-" + ("0" + curDate.getMinutes()).slice(-2);
hiddenElement.download = 'SLYA-config-backup-' + dateString + '.json';
hiddenElement.click();
setTimeout(() => { hiddenElement.remove(); }, 1000);
});
let profileModalClose = document.querySelector('#profileModal .assist-modal-close');
profileModalClose.addEventListener('click', function(e) {assistProfileToggle(null);});
//let addAcctClose = document.querySelector('#addAcctModal .assist-modal-close');
//addAcctClose.addEventListener('click', function(e) {assistAddAcctToggle();});
makeDraggable(assistCheck);
makeDraggable(assistStatus);
makeDraggable(assistStarbaseStatus);
makeDraggable(assistStats); //statsadd
}
}
observer.observe(document, {childList: true, subtree: true});
waitForLabs(null, null);
await initUser();
let autoSpanRef = document.querySelector('#autoScanBtn > span');
autoSpanRef ? autoSpanRef.innerHTML = 'Start' : null;
cLog(0,'init complete');
cLog(0,'Fleets:', userFleets);
})();
';
settingsModalContentString += '';
settingsModalContentString += '';
settingsModalContentString += '';
settingsModalContentString += '';
settingsModalContentString += '';
settingsModalContentString += '';
settingsModalContentString += '
';
//settingsModalContent.innerHTML = ' ✕
Global Settings
Priority Fee Added to each transaction. Set to 0 (zero) to disable (the wallet will then decide the fee!). 1 Lamport = 0.000000001 SOL. Normal transactions will use the full priority fee, smaller transactions will use 10%. Exception: craft transactions are super heavy and will use 250% of the fee.
Auto-Fee? Enable the auto fee algorithm, works best if at least 1 tx is executed per minute.
Save profile selection? Should the profile selection be saved (uncheck to select a different profile each time)?
Tx Poll Delay How many milliseconds to wait before re-reading the chain for confirmation
Console Logging How much console logging you want to see (higher number = more, 0 = none)
Crafting Jobs How many crafting jobs should be enabled?
Subwarp for short distances? Should fleets subwarp when travel distance is 1 diagonal square or less?
Use Ammo Banks for Transport? Should transports also use their ammo banks to help move ammo?
Stop Transports On Error Should transport fleet stop completely if there is an error (example: not enough resource/fuel/etc.)?
Fuel to 100% for transports If a refuel is needed at the source, should transport fleets fill fuel to 100%?
Transports keep 1 resource If unloading a resource, should transport fleets keep 1 resource to save a CreatePDA transaction when loading it again?
Miners keep 1 resource Same as previous option but for miners. Also load 1 food more, so the food token account is not closed, too.
Starbases keep 1 resource Same as previous option but for starbases.
Moving Scan Pattern Only applies to fleets set to Move While Scanning
Scan Block Length How far fleets should go for the up, down, left and right scanning patterns
Scan Block Resets After Resupply? Start from the beginning of the pattern after resupplying at starbase?
Scan Resupply On Low Fuel? Do scanning fleets set to Move While Scanning return to base to resupply when fuel is too low to move?
Scan Sector Regeneration Delay Number of seconds to wait after finding SDU
Scan Pause Time Number of seconds to wait when sectors probabilities are too low
Scan Strike Count Number of low % scans before moving on or pausing
Status Panel Opacity (requires page refresh)
---
Advanced Settings
Auto Start Script Should Lab Assistant automatically start after initialization is complete?
Reload On Stuck Fleets Automatically refresh the page if this many fleets get stuck (0 = never)
Exclude fleets:
(one fleet name per line, case sensivity, reload required)
(one fleet name per line, case sensivity, reload required)
Config Import/Export
✕
- Copy the text below to save your raw Lab Assistant configuration.
- To restore your previous configuration, enter configuration text in the text box below then click the Import Config button.
- To import new Target coordinates for fleets, paste the exported text from EveEye in the text box below then click the Import Fleet Targets button.
Error Log
✕
Snapshot of the error log (to see an updated state, close/open this overlay or use the reload button). Logged errors: ix errors, network errors, unhandled exceptions
'; errorModal.append(errorModalContent); let profileModal = document.createElement('div'); profileModal.classList.add('assist-modal'); profileModal.id = 'profileModal'; profileModal.style.display = 'none'; profileModal.style.zIndex = 3; let profileModalContent = document.createElement('div'); profileModalContent.classList.add('assist-modal-content'); profileModalContent.innerHTML = '
Profile Selection
✕
Select a profile to connect to Lab Assistant.
';
profileModal.append(profileModalContent);
let assistStatus = document.createElement('div');
assistStatus.id = 'assistStatus';
assistStatus.style.display = 'none';
let assistStatusContent = document.createElement('div');
assistStatusContent.classList.add('assist-status-content');
assistStatusContent.innerHTML = 'Status
Fee:'+currentFee+'
✕
Statistics Reset stats
'
assistStats.append(assistStatsContent);
//statsadd end
let assistStarbaseStatus = document.createElement('div');
assistStarbaseStatus.id = 'assistStarbaseStatus';
assistStarbaseStatus.style.display = 'none';
let assistStarbaseStatusContent = document.createElement('div');
assistStarbaseStatusContent.classList.add('assist-status-content');
assistStarbaseStatusContent.innerHTML = '✕
Starbase Status
✕
| Starbase | Coords | Food | Tools |
Fleet Surveillance
✕