(kicad_pcb (version 20171130) (host pcbnew "(5.1.5)-2")

  (general
    (thickness 1.6)
    (drawings 6)
    (tracks 262)
    (zones 0)
    (modules 51)
    (nets 74)
  )

  (page A4)
  (title_block
    (title BBSensor)
    (date 2019-09-11)
    (rev V1.0)
    (comment 1 "Sensor and processing board for BBQ Sensor")
  )

  (layers
    (0 F.Cu signal)
    (31 B.Cu signal)
    (32 B.Adhes user)
    (33 F.Adhes user)
    (34 B.Paste user)
    (35 F.Paste user)
    (36 B.SilkS user)
    (37 F.SilkS user)
    (38 B.Mask user)
    (39 F.Mask user)
    (40 Dwgs.User user)
    (41 Cmts.User user)
    (42 Eco1.User user)
    (43 Eco2.User user)
    (44 Edge.Cuts user)
    (45 Margin user)
    (46 B.CrtYd user)
    (47 F.CrtYd user)
    (48 B.Fab user)
    (49 F.Fab user hide)
  )

  (setup
    (last_trace_width 0.25)
    (trace_clearance 0.2)
    (zone_clearance 0.508)
    (zone_45_only no)
    (trace_min 0.2)
    (via_size 0.8)
    (via_drill 0.4)
    (via_min_size 0.4)
    (via_min_drill 0.3)
    (uvia_size 0.3)
    (uvia_drill 0.1)
    (uvias_allowed no)
    (uvia_min_size 0.2)
    (uvia_min_drill 0.1)
    (edge_width 0.05)
    (segment_width 0.2)
    (pcb_text_width 0.3)
    (pcb_text_size 1.5 1.5)
    (mod_edge_width 0.12)
    (mod_text_size 1 1)
    (mod_text_width 0.15)
    (pad_size 7 7)
    (pad_drill 3.5)
    (pad_to_mask_clearance 0.051)
    (solder_mask_min_width 0.25)
    (aux_axis_origin 15 78)
    (visible_elements 7FFFFFFF)
    (pcbplotparams
      (layerselection 0x010e0_ffffffff)
      (usegerberextensions true)
      (usegerberattributes false)
      (usegerberadvancedattributes false)
      (creategerberjobfile false)
      (excludeedgelayer true)
      (linewidth 0.100000)
      (plotframeref false)
      (viasonmask false)
      (mode 1)
      (useauxorigin true)
      (hpglpennumber 1)
      (hpglpenspeed 20)
      (hpglpendiameter 15.000000)
      (psnegative false)
      (psa4output false)
      (plotreference true)
      (plotvalue true)
      (plotinvisibletext false)
      (padsonsilk false)
      (subtractmaskfromsilk true)
      (outputformat 1)
      (mirror false)
      (drillshape 0)
      (scaleselection 1)
      (outputdirectory "../plot/"))
  )

  (net 0 "")
  (net 1 GND)
  (net 2 +5V)
  (net 3 "Net-(F1-Pad2)")
  (net 4 +3V3)
  (net 5 "Net-(U1-Pad3)")
  (net 6 "Net-(U1-Pad5)")
  (net 7 "Net-(D2-Pad2)")
  (net 8 /MISO_5V)
  (net 9 /MISO)
  (net 10 "Net-(R5-Pad1)")
  (net 11 "Net-(R6-Pad1)")
  (net 12 "Net-(R7-Pad2)")
  (net 13 "Net-(R8-Pad1)")
  (net 14 /SIGNAL1)
  (net 15 /SIGNAL2)
  (net 16 /SIGNAL3)
  (net 17 /SIGNAL4)
  (net 18 /SIGNAL5)
  (net 19 /SIGNAL6)
  (net 20 /SIGNAL7)
  (net 21 /SIGNAL8)
  (net 22 /MOSI)
  (net 23 /CS1)
  (net 24 /SCLK)
  (net 25 /CS2)
  (net 26 "Net-(U1-Pad2)")
  (net 27 /RS)
  (net 28 "Net-(U3-Pad7)")
  (net 29 "Net-(U3-Pad6)")
  (net 30 /DB7)
  (net 31 /DB6)
  (net 32 /DB5)
  (net 33 /DB4)
  (net 34 "Net-(U3-Pad9)")
  (net 35 /ENABLE)
  (net 36 "Net-(U4-Pad10)")
  (net 37 "Net-(U4-Pad9)")
  (net 38 "Net-(U4-Pad8)")
  (net 39 "Net-(U4-Pad7)")
  (net 40 "Net-(C3-Pad2)")
  (net 41 "Net-(C3-Pad1)")
  (net 42 "Net-(D3-Pad2)")
  (net 43 "Net-(D3-Pad1)")
  (net 44 "Net-(SW1-Pad3)")
  (net 45 "Net-(U2-Pad38)")
  (net 46 "Net-(U2-Pad36)")
  (net 47 "Net-(U2-Pad23)")
  (net 48 "Net-(U2-Pad24)")
  (net 49 "Net-(U2-Pad37)")
  (net 50 "Net-(U2-Pad33)")
  (net 51 "Net-(U2-Pad31)")
  (net 52 "Net-(U2-Pad30)")
  (net 53 "Net-(U2-Pad17)")
  (net 54 "Net-(U2-Pad2)")
  (net 55 "Net-(U2-Pad3)")
  (net 56 "Net-(U2-Pad4)")
  (net 57 "Net-(U2-Pad5)")
  (net 58 "Net-(U2-Pad6)")
  (net 59 "Net-(U2-Pad7)")
  (net 60 "Net-(U2-Pad8)")
  (net 61 "Net-(U2-Pad18)")
  (net 62 "Net-(U2-Pad16)")
  (net 63 "Net-(U2-Pad15)")
  (net 64 "Net-(U2-Pad13)")
  (net 65 "Net-(U2-Pad12)")
  (net 66 "Net-(U2-Pad11)")
  (net 67 "Net-(U2-Pad10)")
  (net 68 "Net-(U2-Pad9)")
  (net 69 /VIN)
  (net 70 /VPOWER)
  (net 71 "Net-(C5-Pad1)")
  (net 72 "Net-(Q1-Pad2)")
  (net 73 "Net-(R9-Pad1)")

  (net_class Default "This is the default net class."
    (clearance 0.2)
    (trace_width 0.25)
    (via_dia 0.8)
    (via_drill 0.4)
    (uvia_dia 0.3)
    (uvia_drill 0.1)
    (add_net /CS1)
    (add_net /CS2)
    (add_net /DB4)
    (add_net /DB5)
    (add_net /DB6)
    (add_net /DB7)
    (add_net /ENABLE)
    (add_net /MISO)
    (add_net /MISO_5V)
    (add_net /MOSI)
    (add_net /RS)
    (add_net /SCLK)
    (add_net /SIGNAL1)
    (add_net /SIGNAL2)
    (add_net /SIGNAL3)
    (add_net /SIGNAL4)
    (add_net /SIGNAL5)
    (add_net /SIGNAL6)
    (add_net /SIGNAL7)
    (add_net /SIGNAL8)
    (add_net GND)
    (add_net "Net-(C5-Pad1)")
    (add_net "Net-(D2-Pad2)")
    (add_net "Net-(D3-Pad1)")
    (add_net "Net-(D3-Pad2)")
    (add_net "Net-(Q1-Pad2)")
    (add_net "Net-(R5-Pad1)")
    (add_net "Net-(R6-Pad1)")
    (add_net "Net-(R7-Pad2)")
    (add_net "Net-(R8-Pad1)")
    (add_net "Net-(R9-Pad1)")
    (add_net "Net-(U2-Pad10)")
    (add_net "Net-(U2-Pad11)")
    (add_net "Net-(U2-Pad12)")
    (add_net "Net-(U2-Pad13)")
    (add_net "Net-(U2-Pad15)")
    (add_net "Net-(U2-Pad16)")
    (add_net "Net-(U2-Pad17)")
    (add_net "Net-(U2-Pad18)")
    (add_net "Net-(U2-Pad2)")
    (add_net "Net-(U2-Pad23)")
    (add_net "Net-(U2-Pad24)")
    (add_net "Net-(U2-Pad3)")
    (add_net "Net-(U2-Pad30)")
    (add_net "Net-(U2-Pad31)")
    (add_net "Net-(U2-Pad33)")
    (add_net "Net-(U2-Pad36)")
    (add_net "Net-(U2-Pad37)")
    (add_net "Net-(U2-Pad38)")
    (add_net "Net-(U2-Pad4)")
    (add_net "Net-(U2-Pad5)")
    (add_net "Net-(U2-Pad6)")
    (add_net "Net-(U2-Pad7)")
    (add_net "Net-(U2-Pad8)")
    (add_net "Net-(U2-Pad9)")
    (add_net "Net-(U3-Pad6)")
    (add_net "Net-(U3-Pad7)")
    (add_net "Net-(U3-Pad9)")
    (add_net "Net-(U4-Pad10)")
    (add_net "Net-(U4-Pad7)")
    (add_net "Net-(U4-Pad8)")
    (add_net "Net-(U4-Pad9)")
  )

  (net_class 3V3 ""
    (clearance 0.3)
    (trace_width 0.3)
    (via_dia 0.8)
    (via_drill 0.4)
    (uvia_dia 0.3)
    (uvia_drill 0.1)
    (add_net +3V3)
    (add_net "Net-(C3-Pad1)")
    (add_net "Net-(C3-Pad2)")
    (add_net "Net-(SW1-Pad3)")
    (add_net "Net-(U1-Pad2)")
    (add_net "Net-(U1-Pad3)")
    (add_net "Net-(U1-Pad5)")
  )

  (net_class 5V ""
    (clearance 0.3)
    (trace_width 0.6)
    (via_dia 0.8)
    (via_drill 0.4)
    (uvia_dia 0.3)
    (uvia_drill 0.1)
    (add_net +5V)
    (add_net /VIN)
    (add_net /VPOWER)
    (add_net "Net-(F1-Pad2)")
  )

  (module Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder (layer F.Cu) (tedit 5B36C52B) (tstamp 5E4B2E51)
    (at 44.205 48.768 180)
    (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator")
    (tags "resistor handsolder")
    (path /5E4C1A9B)
    (attr smd)
    (fp_text reference R9 (at -3.039 0) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value 2k2 (at 0 1.65) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.5 0.5) (thickness 0.08)))
    )
    (fp_line (start 1.85 0.95) (end -1.85 0.95) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.85 -0.95) (end 1.85 0.95) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.85 -0.95) (end 1.85 -0.95) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.85 0.95) (end -1.85 -0.95) (layer F.CrtYd) (width 0.05))
    (fp_line (start -0.261252 0.71) (end 0.261252 0.71) (layer F.SilkS) (width 0.12))
    (fp_line (start -0.261252 -0.71) (end 0.261252 -0.71) (layer F.SilkS) (width 0.12))
    (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1))
    (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1))
    (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1))
    (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1))
    (pad 2 smd roundrect (at 1.025 0 180) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391)
      (net 72 "Net-(Q1-Pad2)"))
    (pad 1 smd roundrect (at -1.025 0 180) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391)
      (net 73 "Net-(R9-Pad1)"))
    (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Package_TO_SOT_THT:TO-92_Inline (layer F.Cu) (tedit 5A1DD157) (tstamp 5E4B2D40)
    (at 41.91 45.212)
    (descr "TO-92 leads in-line, narrow, oval pads, drill 0.75mm (see NXP sot054_po.pdf)")
    (tags "to-92 sc-43 sc-43a sot54 PA33 transistor")
    (path /5E4C01C3)
    (fp_text reference Q1 (at 1.27 -3.56) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value S8050 (at 1.27 2.79) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_arc (start 1.27 0) (end 1.27 -2.6) (angle 135) (layer F.SilkS) (width 0.12))
    (fp_arc (start 1.27 0) (end 1.27 -2.48) (angle -135) (layer F.Fab) (width 0.1))
    (fp_arc (start 1.27 0) (end 1.27 -2.6) (angle -135) (layer F.SilkS) (width 0.12))
    (fp_arc (start 1.27 0) (end 1.27 -2.48) (angle 135) (layer F.Fab) (width 0.1))
    (fp_line (start 4 2.01) (end -1.46 2.01) (layer F.CrtYd) (width 0.05))
    (fp_line (start 4 2.01) (end 4 -2.73) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.46 -2.73) (end -1.46 2.01) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.46 -2.73) (end 4 -2.73) (layer F.CrtYd) (width 0.05))
    (fp_line (start -0.5 1.75) (end 3 1.75) (layer F.Fab) (width 0.1))
    (fp_line (start -0.53 1.85) (end 3.07 1.85) (layer F.SilkS) (width 0.12))
    (fp_text user %R (at 1.27 -3.56) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (pad 1 thru_hole rect (at 0 0) (size 1.05 1.5) (drill 0.75) (layers *.Cu *.Mask)
      (net 1 GND))
    (pad 3 thru_hole oval (at 2.54 0) (size 1.05 1.5) (drill 0.75) (layers *.Cu *.Mask)
      (net 71 "Net-(C5-Pad1)"))
    (pad 2 thru_hole oval (at 1.27 0) (size 1.05 1.5) (drill 0.75) (layers *.Cu *.Mask)
      (net 72 "Net-(Q1-Pad2)"))
    (model ${KISYS3DMOD}/Package_TO_SOT_THT.3dshapes/TO-92_Inline.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Collection:ESP-32_NodeMCU (layer F.Cu) (tedit 5E0014F6) (tstamp 5E01B549)
    (at 79.375 46.355 270)
    (descr "Development Board")
    (tags "SoC Wi-Fi Bluetooth")
    (path /5DFAF1AA)
    (fp_text reference U2 (at -12.7 29.21) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value ESP-32_NodeMCU (at 0 0 270) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start -13.75 -27.5) (end 13.75 -27.5) (layer F.SilkS) (width 0.15))
    (fp_line (start 13.75 -27.5) (end 13.75 27.5) (layer F.SilkS) (width 0.15))
    (fp_line (start -13.75 -27.5) (end -13.75 27.5) (layer F.SilkS) (width 0.15))
    (fp_line (start -13.75 27.5) (end 13.75 27.5) (layer F.SilkS) (width 0.15))
    (pad 38 thru_hole circle (at 12.7 22.86 270) (size 1.5 1.5) (drill 0.8) (layers *.Cu *.Mask)
      (net 45 "Net-(U2-Pad38)"))
    (pad 29 thru_hole circle (at 12.7 0 270) (size 1.5 1.5) (drill 0.8) (layers *.Cu *.Mask)
      (net 22 /MOSI))
    (pad 28 thru_hole circle (at 12.7 -2.54 270) (size 1.5 1.5) (drill 0.8) (layers *.Cu *.Mask)
      (net 8 /MISO_5V))
    (pad 36 thru_hole circle (at 12.7 17.78 270) (size 1.5 1.5) (drill 0.8) (layers *.Cu *.Mask)
      (net 46 "Net-(U2-Pad36)"))
    (pad 20 thru_hole circle (at 12.7 -22.86 270) (size 1.5 1.5) (drill 0.8) (layers *.Cu *.Mask)
      (net 1 GND))
    (pad 21 thru_hole circle (at 12.7 -20.32 270) (size 1.5 1.5) (drill 0.8) (layers *.Cu *.Mask)
      (net 11 "Net-(R6-Pad1)"))
    (pad 22 thru_hole circle (at 12.7 -17.78 270) (size 1.5 1.5) (drill 0.8) (layers *.Cu *.Mask)
      (net 10 "Net-(R5-Pad1)"))
    (pad 23 thru_hole circle (at 12.7 -15.24 270) (size 1.5 1.5) (drill 0.8) (layers *.Cu *.Mask)
      (net 47 "Net-(U2-Pad23)"))
    (pad 24 thru_hole circle (at 12.7 -12.7 270) (size 1.5 1.5) (drill 0.8) (layers *.Cu *.Mask)
      (net 48 "Net-(U2-Pad24)"))
    (pad 25 thru_hole circle (at 12.7 -10.16 270) (size 1.5 1.5) (drill 0.8) (layers *.Cu *.Mask)
      (net 23 /CS1))
    (pad 26 thru_hole circle (at 12.7 -7.62 270) (size 1.5 1.5) (drill 0.8) (layers *.Cu *.Mask)
      (net 1 GND))
    (pad 27 thru_hole circle (at 12.7 -5.08 270) (size 1.5 1.5) (drill 0.8) (layers *.Cu *.Mask)
      (net 24 /SCLK))
    (pad 37 thru_hole circle (at 12.7 20.32 270) (size 1.5 1.5) (drill 0.8) (layers *.Cu *.Mask)
      (net 49 "Net-(U2-Pad37)"))
    (pad 35 thru_hole circle (at 12.7 15.24 270) (size 1.5 1.5) (drill 0.8) (layers *.Cu *.Mask)
      (net 73 "Net-(R9-Pad1)"))
    (pad 34 thru_hole circle (at 12.7 12.7 270) (size 1.5 1.5) (drill 0.8) (layers *.Cu *.Mask)
      (net 43 "Net-(D3-Pad1)"))
    (pad 33 thru_hole circle (at 12.7 10.16 270) (size 1.5 1.5) (drill 0.8) (layers *.Cu *.Mask)
      (net 50 "Net-(U2-Pad33)"))
    (pad 32 thru_hole circle (at 12.7 7.62 270) (size 1.5 1.5) (drill 0.8) (layers *.Cu *.Mask)
      (net 25 /CS2))
    (pad 31 thru_hole circle (at 12.7 5.08 270) (size 1.5 1.5) (drill 0.8) (layers *.Cu *.Mask)
      (net 51 "Net-(U2-Pad31)"))
    (pad 30 thru_hole circle (at 12.7 2.54 270) (size 1.5 1.5) (drill 0.8) (layers *.Cu *.Mask)
      (net 52 "Net-(U2-Pad30)"))
    (pad 19 thru_hole circle (at -12.7 22.86 270) (size 1.5 1.5) (drill 0.8) (layers *.Cu *.Mask)
      (net 2 +5V))
    (pad 17 thru_hole circle (at -12.7 17.78 270) (size 1.5 1.5) (drill 0.8) (layers *.Cu *.Mask)
      (net 53 "Net-(U2-Pad17)"))
    (pad 1 thru_hole circle (at -12.7 -22.86 270) (size 1.5 1.5) (drill 0.8) (layers *.Cu *.Mask)
      (net 4 +3V3))
    (pad 2 thru_hole circle (at -12.7 -20.32 270) (size 1.5 1.5) (drill 0.8) (layers *.Cu *.Mask)
      (net 54 "Net-(U2-Pad2)"))
    (pad 3 thru_hole circle (at -12.7 -17.78 270) (size 1.5 1.5) (drill 0.8) (layers *.Cu *.Mask)
      (net 55 "Net-(U2-Pad3)"))
    (pad 4 thru_hole circle (at -12.7 -15.24 270) (size 1.5 1.5) (drill 0.8) (layers *.Cu *.Mask)
      (net 56 "Net-(U2-Pad4)"))
    (pad 5 thru_hole circle (at -12.7 -12.7 270) (size 1.5 1.5) (drill 0.8) (layers *.Cu *.Mask)
      (net 57 "Net-(U2-Pad5)"))
    (pad 6 thru_hole circle (at -12.7 -10.16 270) (size 1.5 1.5) (drill 0.8) (layers *.Cu *.Mask)
      (net 58 "Net-(U2-Pad6)"))
    (pad 7 thru_hole circle (at -12.7 -7.62 270) (size 1.5 1.5) (drill 0.8) (layers *.Cu *.Mask)
      (net 59 "Net-(U2-Pad7)"))
    (pad 8 thru_hole circle (at -12.7 -5.08 270) (size 1.5 1.5) (drill 0.8) (layers *.Cu *.Mask)
      (net 60 "Net-(U2-Pad8)"))
    (pad 18 thru_hole circle (at -12.7 20.32 270) (size 1.5 1.5) (drill 0.8) (layers *.Cu *.Mask)
      (net 61 "Net-(U2-Pad18)"))
    (pad 16 thru_hole circle (at -12.7 15.24 270) (size 1.5 1.5) (drill 0.8) (layers *.Cu *.Mask)
      (net 62 "Net-(U2-Pad16)"))
    (pad 15 thru_hole circle (at -12.7 12.7 270) (size 1.5 1.5) (drill 0.8) (layers *.Cu *.Mask)
      (net 63 "Net-(U2-Pad15)"))
    (pad 14 thru_hole circle (at -12.7 10.16 270) (size 1.5 1.5) (drill 0.8) (layers *.Cu *.Mask)
      (net 1 GND))
    (pad 13 thru_hole circle (at -12.7 7.62 270) (size 1.5 1.5) (drill 0.8) (layers *.Cu *.Mask)
      (net 64 "Net-(U2-Pad13)"))
    (pad 12 thru_hole circle (at -12.7 5.08 270) (size 1.5 1.5) (drill 0.8) (layers *.Cu *.Mask)
      (net 65 "Net-(U2-Pad12)"))
    (pad 11 thru_hole circle (at -12.7 2.54 270) (size 1.5 1.5) (drill 0.8) (layers *.Cu *.Mask)
      (net 66 "Net-(U2-Pad11)"))
    (pad 10 thru_hole circle (at -12.7 0 270) (size 1.5 1.5) (drill 0.8) (layers *.Cu *.Mask)
      (net 67 "Net-(U2-Pad10)"))
    (pad 9 thru_hole circle (at -12.7 -2.54 270) (size 1.5 1.5) (drill 0.8) (layers *.Cu *.Mask)
      (net 68 "Net-(U2-Pad9)"))
  )

  (module Package_SO:SOIC-16_3.9x9.9mm_P1.27mm (layer F.Cu) (tedit 5D9F72B1) (tstamp 5DF83A91)
    (at 69.215 26.605 270)
    (descr "SOIC, 16 Pin (JEDEC MS-012AC, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/soic_narrow-r/r_16.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py")
    (tags "SOIC SO")
    (path /5E280B8F)
    (attr smd)
    (fp_text reference U3 (at 2.5415 6.35 180) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value 74HC595 (at 0 5.9 90) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text user %R (at 0 0 90) (layer F.Fab)
      (effects (font (size 0.98 0.98) (thickness 0.15)))
    )
    (fp_line (start 3.7 -5.2) (end -3.7 -5.2) (layer F.CrtYd) (width 0.05))
    (fp_line (start 3.7 5.2) (end 3.7 -5.2) (layer F.CrtYd) (width 0.05))
    (fp_line (start -3.7 5.2) (end 3.7 5.2) (layer F.CrtYd) (width 0.05))
    (fp_line (start -3.7 -5.2) (end -3.7 5.2) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.95 -3.975) (end -0.975 -4.95) (layer F.Fab) (width 0.1))
    (fp_line (start -1.95 4.95) (end -1.95 -3.975) (layer F.Fab) (width 0.1))
    (fp_line (start 1.95 4.95) (end -1.95 4.95) (layer F.Fab) (width 0.1))
    (fp_line (start 1.95 -4.95) (end 1.95 4.95) (layer F.Fab) (width 0.1))
    (fp_line (start -0.975 -4.95) (end 1.95 -4.95) (layer F.Fab) (width 0.1))
    (fp_line (start 0 -5.06) (end -3.45 -5.06) (layer F.SilkS) (width 0.12))
    (fp_line (start 0 -5.06) (end 1.95 -5.06) (layer F.SilkS) (width 0.12))
    (fp_line (start 0 5.06) (end -1.95 5.06) (layer F.SilkS) (width 0.12))
    (fp_line (start 0 5.06) (end 1.95 5.06) (layer F.SilkS) (width 0.12))
    (pad 16 smd roundrect (at 2.475 -4.445 270) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
      (net 71 "Net-(C5-Pad1)"))
    (pad 15 smd roundrect (at 2.475 -3.175 270) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
      (net 27 /RS))
    (pad 14 smd roundrect (at 2.475 -1.905 270) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
      (net 22 /MOSI))
    (pad 13 smd roundrect (at 2.475 -0.635 270) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
      (net 1 GND))
    (pad 12 smd roundrect (at 2.475 0.635 270) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
      (net 25 /CS2))
    (pad 11 smd roundrect (at 2.475 1.905 270) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
      (net 24 /SCLK))
    (pad 10 smd roundrect (at 2.475 3.175 270) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
      (net 71 "Net-(C5-Pad1)"))
    (pad 9 smd roundrect (at 2.475 4.445 270) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
      (net 34 "Net-(U3-Pad9)"))
    (pad 8 smd roundrect (at -2.475 4.445 270) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
      (net 1 GND))
    (pad 7 smd roundrect (at -2.475 3.175 270) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
      (net 28 "Net-(U3-Pad7)"))
    (pad 6 smd roundrect (at -2.475 1.905 270) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
      (net 29 "Net-(U3-Pad6)"))
    (pad 5 smd roundrect (at -2.475 0.635 270) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
      (net 30 /DB7))
    (pad 4 smd roundrect (at -2.475 -0.635 270) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
      (net 31 /DB6))
    (pad 3 smd roundrect (at -2.475 -1.905 270) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
      (net 32 /DB5))
    (pad 2 smd roundrect (at -2.475 -3.175 270) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
      (net 33 /DB4))
    (pad 1 smd roundrect (at -2.475 -4.445 270) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
      (net 35 /ENABLE))
    (model ${KISYS3DMOD}/Package_SO.3dshapes/SOIC-16_3.9x9.9mm_P1.27mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module LED_THT:LED_D3.0mm (layer B.Cu) (tedit 587A3A7B) (tstamp 5E00BC26)
    (at 112.776 58.293)
    (descr "LED, diameter 3.0mm, 2 pins")
    (tags "LED diameter 3.0mm 2 pins")
    (path /5DFAF14A)
    (fp_text reference D3 (at 4.953 0) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value GREEN (at 1.27 -2.96) (layer B.Fab)
      (effects (font (size 1 1) (thickness 0.15)) (justify mirror))
    )
    (fp_line (start 3.7 2.25) (end -1.15 2.25) (layer B.CrtYd) (width 0.05))
    (fp_line (start 3.7 -2.25) (end 3.7 2.25) (layer B.CrtYd) (width 0.05))
    (fp_line (start -1.15 -2.25) (end 3.7 -2.25) (layer B.CrtYd) (width 0.05))
    (fp_line (start -1.15 2.25) (end -1.15 -2.25) (layer B.CrtYd) (width 0.05))
    (fp_line (start -0.29 -1.08) (end -0.29 -1.236) (layer B.SilkS) (width 0.12))
    (fp_line (start -0.29 1.236) (end -0.29 1.08) (layer B.SilkS) (width 0.12))
    (fp_line (start -0.23 1.16619) (end -0.23 -1.16619) (layer B.Fab) (width 0.1))
    (fp_circle (center 1.27 0) (end 2.77 0) (layer B.Fab) (width 0.1))
    (fp_arc (start 1.27 0) (end 0.229039 -1.08) (angle 87.9) (layer B.SilkS) (width 0.12))
    (fp_arc (start 1.27 0) (end 0.229039 1.08) (angle -87.9) (layer B.SilkS) (width 0.12))
    (fp_arc (start 1.27 0) (end -0.29 -1.235516) (angle 108.8) (layer B.SilkS) (width 0.12))
    (fp_arc (start 1.27 0) (end -0.29 1.235516) (angle -108.8) (layer B.SilkS) (width 0.12))
    (fp_arc (start 1.27 0) (end -0.23 1.16619) (angle -284.3) (layer B.Fab) (width 0.1))
    (pad 2 thru_hole circle (at 2.54 0) (size 1.8 1.8) (drill 0.9) (layers *.Cu *.Mask)
      (net 42 "Net-(D3-Pad2)"))
    (pad 1 thru_hole rect (at 0 0) (size 1.8 1.8) (drill 0.9) (layers *.Cu *.Mask)
      (net 43 "Net-(D3-Pad1)"))
    (model ${KISYS3DMOD}/LED_THT.3dshapes/LED_D3.0mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Collection:HD44780_LCD_2x16 (layer B.Cu) (tedit 5D58931B) (tstamp 5E009FA1)
    (at 69.6 36.455 180)
    (path /5E280C0D)
    (fp_text reference U4 (at -32 19.31) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value HD44780 (at 0 19.35) (layer B.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)) (justify mirror))
    )
    (fp_line (start -40.1 18.1) (end -40.1 -18.1) (layer B.SilkS) (width 0.15))
    (fp_line (start 40.1 18.1) (end 40.1 -18.1) (layer B.SilkS) (width 0.15))
    (fp_line (start -40.1 18.1) (end 40.1 18.1) (layer B.SilkS) (width 0.15))
    (fp_line (start -40.1 -18.1) (end 40.1 -18.1) (layer B.SilkS) (width 0.15))
    (pad 16 thru_hole circle (at 6.1 15.5 180) (size 1.8 1.8) (drill 1) (layers *.Cu *.Mask)
      (net 1 GND))
    (pad 15 thru_hole circle (at 3.56 15.5 180) (size 1.8 1.8) (drill 1) (layers *.Cu *.Mask)
      (net 12 "Net-(R7-Pad2)"))
    (pad 14 thru_hole circle (at 1.02 15.5 180) (size 1.8 1.8) (drill 1) (layers *.Cu *.Mask)
      (net 30 /DB7))
    (pad 13 thru_hole circle (at -1.52 15.5 180) (size 1.8 1.8) (drill 1) (layers *.Cu *.Mask)
      (net 31 /DB6))
    (pad 12 thru_hole circle (at -4.06 15.5 180) (size 1.8 1.8) (drill 1) (layers *.Cu *.Mask)
      (net 32 /DB5))
    (pad 11 thru_hole circle (at -6.6 15.5 180) (size 1.8 1.8) (drill 1) (layers *.Cu *.Mask)
      (net 33 /DB4))
    (pad 10 thru_hole circle (at -9.14 15.5 180) (size 1.8 1.8) (drill 1) (layers *.Cu *.Mask)
      (net 36 "Net-(U4-Pad10)"))
    (pad 9 thru_hole circle (at -11.68 15.5 180) (size 1.8 1.8) (drill 1) (layers *.Cu *.Mask)
      (net 37 "Net-(U4-Pad9)"))
    (pad 8 thru_hole circle (at -14.22 15.5 180) (size 1.8 1.8) (drill 1) (layers *.Cu *.Mask)
      (net 38 "Net-(U4-Pad8)"))
    (pad 7 thru_hole circle (at -16.76 15.5 180) (size 1.8 1.8) (drill 1) (layers *.Cu *.Mask)
      (net 39 "Net-(U4-Pad7)"))
    (pad 6 thru_hole circle (at -19.3 15.5 180) (size 1.8 1.8) (drill 1) (layers *.Cu *.Mask)
      (net 35 /ENABLE))
    (pad 5 thru_hole circle (at -21.84 15.5 180) (size 1.8 1.8) (drill 1) (layers *.Cu *.Mask)
      (net 1 GND))
    (pad 4 thru_hole circle (at -24.38 15.5 180) (size 1.8 1.8) (drill 1) (layers *.Cu *.Mask)
      (net 27 /RS))
    (pad 3 thru_hole circle (at -26.92 15.5 180) (size 1.8 1.8) (drill 1) (layers *.Cu *.Mask)
      (net 13 "Net-(R8-Pad1)"))
    (pad 2 thru_hole circle (at -29.46 15.5 180) (size 1.8 1.8) (drill 1) (layers *.Cu *.Mask)
      (net 71 "Net-(C5-Pad1)"))
    (pad 1 thru_hole rect (at -32 15.5 180) (size 1.8 1.8) (drill 1) (layers *.Cu *.Mask)
      (net 1 GND))
    (pad "" np_thru_hole circle (at 37.35 -15.35 180) (size 5 5) (drill 2.7) (layers *.Cu *.Mask))
    (pad "" np_thru_hole circle (at -37.35 -15.35 180) (size 5 5) (drill 2.7) (layers *.Cu *.Mask))
    (pad "" np_thru_hole circle (at 37.35 15.4 180) (size 5 5) (drill 2.7) (layers *.Cu *.Mask))
    (pad "" np_thru_hole circle (at -37.35 15.35 180) (size 5 5) (drill 2.7) (layers *.Cu *.Mask))
    (model ${BBLIB_3D}/Collection.3dshapes/HD44780_LCD_2x16.step
      (offset (xyz -40 -18 2.6))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Package_SO:SOIC-16_3.9x9.9mm_P1.27mm (layer F.Cu) (tedit 5D9F72B1) (tstamp 5DF83AD9)
    (at 40.702 59.055 180)
    (descr "SOIC, 16 Pin (JEDEC MS-012AC, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/soic_narrow-r/r_16.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py")
    (tags "SOIC SO")
    (path /5DFC7EE9)
    (attr smd)
    (fp_text reference U5 (at 2.475 5.715) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value MCP3208 (at 0 5.9) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.98 0.98) (thickness 0.15)))
    )
    (fp_line (start 3.7 -5.2) (end -3.7 -5.2) (layer F.CrtYd) (width 0.05))
    (fp_line (start 3.7 5.2) (end 3.7 -5.2) (layer F.CrtYd) (width 0.05))
    (fp_line (start -3.7 5.2) (end 3.7 5.2) (layer F.CrtYd) (width 0.05))
    (fp_line (start -3.7 -5.2) (end -3.7 5.2) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.95 -3.975) (end -0.975 -4.95) (layer F.Fab) (width 0.1))
    (fp_line (start -1.95 4.95) (end -1.95 -3.975) (layer F.Fab) (width 0.1))
    (fp_line (start 1.95 4.95) (end -1.95 4.95) (layer F.Fab) (width 0.1))
    (fp_line (start 1.95 -4.95) (end 1.95 4.95) (layer F.Fab) (width 0.1))
    (fp_line (start -0.975 -4.95) (end 1.95 -4.95) (layer F.Fab) (width 0.1))
    (fp_line (start 0 -5.06) (end -3.45 -5.06) (layer F.SilkS) (width 0.12))
    (fp_line (start 0 -5.06) (end 1.95 -5.06) (layer F.SilkS) (width 0.12))
    (fp_line (start 0 5.06) (end -1.95 5.06) (layer F.SilkS) (width 0.12))
    (fp_line (start 0 5.06) (end 1.95 5.06) (layer F.SilkS) (width 0.12))
    (pad 16 smd roundrect (at 2.475 -4.445 180) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
      (net 2 +5V))
    (pad 15 smd roundrect (at 2.475 -3.175 180) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
      (net 2 +5V))
    (pad 14 smd roundrect (at 2.475 -1.905 180) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
      (net 1 GND))
    (pad 13 smd roundrect (at 2.475 -0.635 180) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
      (net 24 /SCLK))
    (pad 12 smd roundrect (at 2.475 0.635 180) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
      (net 9 /MISO))
    (pad 11 smd roundrect (at 2.475 1.905 180) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
      (net 22 /MOSI))
    (pad 10 smd roundrect (at 2.475 3.175 180) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
      (net 23 /CS1))
    (pad 9 smd roundrect (at 2.475 4.445 180) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
      (net 1 GND))
    (pad 8 smd roundrect (at -2.475 4.445 180) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
      (net 21 /SIGNAL8))
    (pad 7 smd roundrect (at -2.475 3.175 180) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
      (net 20 /SIGNAL7))
    (pad 6 smd roundrect (at -2.475 1.905 180) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
      (net 19 /SIGNAL6))
    (pad 5 smd roundrect (at -2.475 0.635 180) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
      (net 18 /SIGNAL5))
    (pad 4 smd roundrect (at -2.475 -0.635 180) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
      (net 17 /SIGNAL4))
    (pad 3 smd roundrect (at -2.475 -1.905 180) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
      (net 16 /SIGNAL3))
    (pad 2 smd roundrect (at -2.475 -3.175 180) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
      (net 15 /SIGNAL2))
    (pad 1 smd roundrect (at -2.475 -4.445 180) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
      (net 14 /SIGNAL1))
    (model ${KISYS3DMOD}/Package_SO.3dshapes/SOIC-16_3.9x9.9mm_P1.27mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder (layer F.Cu) (tedit 5B36C52B) (tstamp 5DF838B3)
    (at 95.495 23.495 180)
    (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator")
    (tags "resistor handsolder")
    (path /5E280BE3)
    (attr smd)
    (fp_text reference R8 (at -2.93 0) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value 2k (at 0 1.65) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.5 0.5) (thickness 0.08)))
    )
    (fp_line (start 1.85 0.95) (end -1.85 0.95) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.85 -0.95) (end 1.85 0.95) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.85 -0.95) (end 1.85 -0.95) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.85 0.95) (end -1.85 -0.95) (layer F.CrtYd) (width 0.05))
    (fp_line (start -0.261252 0.71) (end 0.261252 0.71) (layer F.SilkS) (width 0.12))
    (fp_line (start -0.261252 -0.71) (end 0.261252 -0.71) (layer F.SilkS) (width 0.12))
    (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1))
    (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1))
    (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1))
    (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1))
    (pad 2 smd roundrect (at 1.025 0 180) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391)
      (net 1 GND))
    (pad 1 smd roundrect (at -1.025 0 180) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391)
      (net 13 "Net-(R8-Pad1)"))
    (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder (layer F.Cu) (tedit 5B36C52B) (tstamp 5DF8389C)
    (at 66.04 17.771 270)
    (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator")
    (tags "resistor handsolder")
    (path /5E280BCB)
    (attr smd)
    (fp_text reference R7 (at 0.009 1.905 180) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value 220 (at 0 1.65 90) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text user %R (at 0 0 90) (layer F.Fab)
      (effects (font (size 0.5 0.5) (thickness 0.08)))
    )
    (fp_line (start 1.85 0.95) (end -1.85 0.95) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.85 -0.95) (end 1.85 0.95) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.85 -0.95) (end 1.85 -0.95) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.85 0.95) (end -1.85 -0.95) (layer F.CrtYd) (width 0.05))
    (fp_line (start -0.261252 0.71) (end 0.261252 0.71) (layer F.SilkS) (width 0.12))
    (fp_line (start -0.261252 -0.71) (end 0.261252 -0.71) (layer F.SilkS) (width 0.12))
    (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1))
    (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1))
    (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1))
    (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1))
    (pad 2 smd roundrect (at 1.025 0 270) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391)
      (net 12 "Net-(R7-Pad2)"))
    (pad 1 smd roundrect (at -1.025 0 270) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391)
      (net 71 "Net-(C5-Pad1)"))
    (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder (layer F.Cu) (tedit 5B36C52B) (tstamp 5DF83885)
    (at 108.585 30.4075 90)
    (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator")
    (tags "resistor handsolder")
    (path /5DFAF13B)
    (attr smd)
    (fp_text reference R6 (at -2.6125 0 180) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value 2k2 (at 0 1.65 90) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text user %R (at 0 0 90) (layer F.Fab)
      (effects (font (size 0.5 0.5) (thickness 0.08)))
    )
    (fp_line (start 1.85 0.95) (end -1.85 0.95) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.85 -0.95) (end 1.85 0.95) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.85 -0.95) (end 1.85 -0.95) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.85 0.95) (end -1.85 -0.95) (layer F.CrtYd) (width 0.05))
    (fp_line (start -0.261252 0.71) (end 0.261252 0.71) (layer F.SilkS) (width 0.12))
    (fp_line (start -0.261252 -0.71) (end 0.261252 -0.71) (layer F.SilkS) (width 0.12))
    (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1))
    (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1))
    (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1))
    (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1))
    (pad 2 smd roundrect (at 1.025 0 90) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391)
      (net 1 GND))
    (pad 1 smd roundrect (at -1.025 0 90) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391)
      (net 11 "Net-(R6-Pad1)"))
    (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder (layer F.Cu) (tedit 5B36C52B) (tstamp 5DF8386E)
    (at 108.585 43.1075 90)
    (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator")
    (tags "resistor handsolder")
    (path /5DFAF195)
    (attr smd)
    (fp_text reference R5 (at -2.6125 0 180) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value 2k2 (at 0 1.65 90) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text user %R (at 0 0 90) (layer F.Fab)
      (effects (font (size 0.5 0.5) (thickness 0.08)))
    )
    (fp_line (start 1.85 0.95) (end -1.85 0.95) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.85 -0.95) (end 1.85 0.95) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.85 -0.95) (end 1.85 -0.95) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.85 0.95) (end -1.85 -0.95) (layer F.CrtYd) (width 0.05))
    (fp_line (start -0.261252 0.71) (end 0.261252 0.71) (layer F.SilkS) (width 0.12))
    (fp_line (start -0.261252 -0.71) (end 0.261252 -0.71) (layer F.SilkS) (width 0.12))
    (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1))
    (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1))
    (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1))
    (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1))
    (pad 2 smd roundrect (at 1.025 0 90) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391)
      (net 1 GND))
    (pad 1 smd roundrect (at -1.025 0 90) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391)
      (net 10 "Net-(R5-Pad1)"))
    (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder (layer F.Cu) (tedit 5B36C52B) (tstamp 5DF83857)
    (at 80.89 53.721 180)
    (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator")
    (tags "resistor handsolder")
    (path /5DFAF16D)
    (attr smd)
    (fp_text reference R4 (at 2.785 0) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value 2k2 (at 0 1.65) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.5 0.5) (thickness 0.08)))
    )
    (fp_line (start 1.85 0.95) (end -1.85 0.95) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.85 -0.95) (end 1.85 0.95) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.85 -0.95) (end 1.85 -0.95) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.85 0.95) (end -1.85 -0.95) (layer F.CrtYd) (width 0.05))
    (fp_line (start -0.261252 0.71) (end 0.261252 0.71) (layer F.SilkS) (width 0.12))
    (fp_line (start -0.261252 -0.71) (end 0.261252 -0.71) (layer F.SilkS) (width 0.12))
    (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1))
    (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1))
    (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1))
    (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1))
    (pad 2 smd roundrect (at 1.025 0 180) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391)
      (net 1 GND))
    (pad 1 smd roundrect (at -1.025 0 180) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391)
      (net 8 /MISO_5V))
    (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder (layer F.Cu) (tedit 5B36C52B) (tstamp 5DF83840)
    (at 80.89 55.88)
    (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator")
    (tags "resistor handsolder")
    (path /5DFAF125)
    (attr smd)
    (fp_text reference R3 (at -2.785 0) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value 1k (at 0 1.65) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.5 0.5) (thickness 0.08)))
    )
    (fp_line (start 1.85 0.95) (end -1.85 0.95) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.85 -0.95) (end 1.85 0.95) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.85 -0.95) (end 1.85 -0.95) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.85 0.95) (end -1.85 -0.95) (layer F.CrtYd) (width 0.05))
    (fp_line (start -0.261252 0.71) (end 0.261252 0.71) (layer F.SilkS) (width 0.12))
    (fp_line (start -0.261252 -0.71) (end 0.261252 -0.71) (layer F.SilkS) (width 0.12))
    (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1))
    (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1))
    (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1))
    (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1))
    (pad 2 smd roundrect (at 1.025 0) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391)
      (net 8 /MISO_5V))
    (pad 1 smd roundrect (at -1.025 0) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391)
      (net 9 /MISO))
    (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder (layer F.Cu) (tedit 5B36C52B) (tstamp 5DF83829)
    (at 115.6245 54.61 180)
    (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator")
    (tags "resistor handsolder")
    (path /5DFAF156)
    (attr smd)
    (fp_text reference R2 (at 2.93 0) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value 140 (at 0 1.65) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.5 0.5) (thickness 0.08)))
    )
    (fp_line (start 1.85 0.95) (end -1.85 0.95) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.85 -0.95) (end 1.85 0.95) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.85 -0.95) (end 1.85 -0.95) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.85 0.95) (end -1.85 -0.95) (layer F.CrtYd) (width 0.05))
    (fp_line (start -0.261252 0.71) (end 0.261252 0.71) (layer F.SilkS) (width 0.12))
    (fp_line (start -0.261252 -0.71) (end 0.261252 -0.71) (layer F.SilkS) (width 0.12))
    (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1))
    (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1))
    (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1))
    (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1))
    (pad 2 smd roundrect (at 1.025 0 180) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391)
      (net 42 "Net-(D3-Pad2)"))
    (pad 1 smd roundrect (at -1.025 0 180) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391)
      (net 4 +3V3))
    (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder (layer F.Cu) (tedit 5B36C52B) (tstamp 5DF83812)
    (at 108.195 26.035 180)
    (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator")
    (tags "resistor handsolder")
    (path /5DF98DD1)
    (attr smd)
    (fp_text reference R1 (at 2.785 0) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value 220 (at 0 1.65) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.5 0.5) (thickness 0.08)))
    )
    (fp_line (start 1.85 0.95) (end -1.85 0.95) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.85 -0.95) (end 1.85 0.95) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.85 -0.95) (end 1.85 -0.95) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.85 0.95) (end -1.85 -0.95) (layer F.CrtYd) (width 0.05))
    (fp_line (start -0.261252 0.71) (end 0.261252 0.71) (layer F.SilkS) (width 0.12))
    (fp_line (start -0.261252 -0.71) (end 0.261252 -0.71) (layer F.SilkS) (width 0.12))
    (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1))
    (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1))
    (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1))
    (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1))
    (pad 2 smd roundrect (at 1.025 0 180) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391)
      (net 2 +5V))
    (pad 1 smd roundrect (at -1.025 0 180) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391)
      (net 7 "Net-(D2-Pad2)"))
    (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder (layer F.Cu) (tedit 5B36C52B) (tstamp 5DF8377A)
    (at 39.252 65.405)
    (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator")
    (tags "resistor handsolder")
    (path /5DFC7EF0)
    (attr smd)
    (fp_text reference C6 (at 2.785 0) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value 100n (at 0 1.65) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.5 0.5) (thickness 0.08)))
    )
    (fp_line (start 1.85 0.95) (end -1.85 0.95) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.85 -0.95) (end 1.85 0.95) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.85 -0.95) (end 1.85 -0.95) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.85 0.95) (end -1.85 -0.95) (layer F.CrtYd) (width 0.05))
    (fp_line (start -0.261252 0.71) (end 0.261252 0.71) (layer F.SilkS) (width 0.12))
    (fp_line (start -0.261252 -0.71) (end 0.261252 -0.71) (layer F.SilkS) (width 0.12))
    (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1))
    (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1))
    (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1))
    (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1))
    (pad 2 smd roundrect (at 1.025 0) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391)
      (net 1 GND))
    (pad 1 smd roundrect (at -1.025 0) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391)
      (net 2 +5V))
    (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder (layer F.Cu) (tedit 5B36C52B) (tstamp 5E01F6FD)
    (at 65.015 31.4325 180)
    (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator")
    (tags "resistor handsolder")
    (path /5E280B95)
    (attr smd)
    (fp_text reference C5 (at 3.801 0) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value 100n (at 0 1.65) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.5 0.5) (thickness 0.08)))
    )
    (fp_line (start 1.85 0.95) (end -1.85 0.95) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.85 -0.95) (end 1.85 0.95) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.85 -0.95) (end 1.85 -0.95) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.85 0.95) (end -1.85 -0.95) (layer F.CrtYd) (width 0.05))
    (fp_line (start -0.261252 0.71) (end 0.261252 0.71) (layer F.SilkS) (width 0.12))
    (fp_line (start -0.261252 -0.71) (end 0.261252 -0.71) (layer F.SilkS) (width 0.12))
    (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1))
    (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1))
    (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1))
    (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1))
    (pad 2 smd roundrect (at 1.025 0 180) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391)
      (net 1 GND))
    (pad 1 smd roundrect (at -1.025 0 180) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391)
      (net 71 "Net-(C5-Pad1)"))
    (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder (layer F.Cu) (tedit 5B36C52B) (tstamp 5DF83728)
    (at 31.505 34.29)
    (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator")
    (tags "resistor handsolder")
    (path /5DF98E4C)
    (attr smd)
    (fp_text reference C3 (at 2.785 0) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value 10n (at 0 1.65) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.5 0.5) (thickness 0.08)))
    )
    (fp_line (start 1.85 0.95) (end -1.85 0.95) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.85 -0.95) (end 1.85 0.95) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.85 -0.95) (end 1.85 -0.95) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.85 0.95) (end -1.85 -0.95) (layer F.CrtYd) (width 0.05))
    (fp_line (start -0.261252 0.71) (end 0.261252 0.71) (layer F.SilkS) (width 0.12))
    (fp_line (start -0.261252 -0.71) (end 0.261252 -0.71) (layer F.SilkS) (width 0.12))
    (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1))
    (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1))
    (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1))
    (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1))
    (pad 2 smd roundrect (at 1.025 0) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391)
      (net 40 "Net-(C3-Pad2)"))
    (pad 1 smd roundrect (at -1.025 0) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391)
      (net 41 "Net-(C3-Pad1)"))
    (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder (layer F.Cu) (tedit 5B36C52B) (tstamp 5DF83717)
    (at 25.4 72.78 270)
    (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator")
    (tags "resistor handsolder")
    (path /5DF98E03)
    (attr smd)
    (fp_text reference C2 (at -2.93 0 180) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value 100n (at 0 1.65 90) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text user %R (at 0 0 90) (layer F.Fab)
      (effects (font (size 0.5 0.5) (thickness 0.08)))
    )
    (fp_line (start 1.85 0.95) (end -1.85 0.95) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.85 -0.95) (end 1.85 0.95) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.85 -0.95) (end 1.85 -0.95) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.85 0.95) (end -1.85 -0.95) (layer F.CrtYd) (width 0.05))
    (fp_line (start -0.261252 0.71) (end 0.261252 0.71) (layer F.SilkS) (width 0.12))
    (fp_line (start -0.261252 -0.71) (end 0.261252 -0.71) (layer F.SilkS) (width 0.12))
    (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1))
    (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1))
    (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1))
    (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1))
    (pad 2 smd roundrect (at 1.025 0 270) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391)
      (net 1 GND))
    (pad 1 smd roundrect (at -1.025 0 270) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391)
      (net 69 /VIN))
    (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module LED_THT:LED_D3.0mm (layer B.Cu) (tedit 587A3A7B) (tstamp 5DF96BF5)
    (at 115.316 26.035 180)
    (descr "LED, diameter 3.0mm, 2 pins")
    (tags "LED diameter 3.0mm 2 pins")
    (path /5DF98DD7)
    (fp_text reference D2 (at -2.2225 0) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value POWER (at 1.27 -2.96) (layer B.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 3.7 2.25) (end -1.15 2.25) (layer B.CrtYd) (width 0.05))
    (fp_line (start 3.7 -2.25) (end 3.7 2.25) (layer B.CrtYd) (width 0.05))
    (fp_line (start -1.15 -2.25) (end 3.7 -2.25) (layer B.CrtYd) (width 0.05))
    (fp_line (start -1.15 2.25) (end -1.15 -2.25) (layer B.CrtYd) (width 0.05))
    (fp_line (start -0.29 -1.08) (end -0.29 -1.236) (layer B.SilkS) (width 0.12))
    (fp_line (start -0.29 1.236) (end -0.29 1.08) (layer B.SilkS) (width 0.12))
    (fp_line (start -0.23 1.16619) (end -0.23 -1.16619) (layer B.Fab) (width 0.1))
    (fp_circle (center 1.27 0) (end 2.77 0) (layer B.Fab) (width 0.1))
    (fp_arc (start 1.27 0) (end 0.229039 -1.08) (angle 87.9) (layer B.SilkS) (width 0.12))
    (fp_arc (start 1.27 0) (end 0.229039 1.08) (angle -87.9) (layer B.SilkS) (width 0.12))
    (fp_arc (start 1.27 0) (end -0.29 -1.235516) (angle 108.8) (layer B.SilkS) (width 0.12))
    (fp_arc (start 1.27 0) (end -0.29 1.235516) (angle -108.8) (layer B.SilkS) (width 0.12))
    (fp_arc (start 1.27 0) (end -0.23 1.16619) (angle -284.3) (layer B.Fab) (width 0.1))
    (pad 2 thru_hole circle (at 2.54 0 180) (size 1.8 1.8) (drill 0.9) (layers *.Cu *.Mask)
      (net 7 "Net-(D2-Pad2)"))
    (pad 1 thru_hole rect (at 0 0 180) (size 1.8 1.8) (drill 0.9) (layers *.Cu *.Mask)
      (net 1 GND))
    (model ${KISYS3DMOD}/LED_THT.3dshapes/LED_D3.0mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module NAMAE:NAMAE_JTP-1130P (layer B.Cu) (tedit 5A0C2FC7) (tstamp 5DF95BC3)
    (at 111.5695 51.7525 90)
    (path /5DFAD75E)
    (fp_text reference SW3 (at 10.16 5.08 180) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SW_Push_Dual (at 3.5 7 90) (layer B.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)) (justify mirror))
    )
    (fp_arc (start 0.81 5.54) (end 0.81 4.24) (angle 90) (layer B.SilkS) (width 0.15))
    (fp_arc (start 6.81 5.54) (end 5.51 5.54) (angle 90) (layer B.SilkS) (width 0.15))
    (fp_arc (start 6.81 -0.46) (end 6.81 0.84) (angle 90) (layer B.SilkS) (width 0.15))
    (fp_arc (start 0.81 -0.46) (end 2.11 -0.46) (angle 90) (layer B.SilkS) (width 0.15))
    (fp_line (start 6.81 4.24) (end 6.81 0.84) (layer B.SilkS) (width 0.15))
    (fp_line (start 0.81 0.84) (end 0.81 4.24) (layer B.SilkS) (width 0.15))
    (fp_line (start 2.11 5.54) (end 5.51 5.54) (layer B.SilkS) (width 0.15))
    (fp_line (start 2.11 -0.46) (end 5.51 -0.46) (layer B.SilkS) (width 0.15))
    (fp_line (start -1.05 -1.15) (end 8.6995 -1.15) (layer B.CrtYd) (width 0.05))
    (fp_line (start 8.6995 6.1595) (end 8.6995 -1.15) (layer B.CrtYd) (width 0.05))
    (fp_line (start -1.05 6.1595) (end -1.05 -1.15) (layer B.CrtYd) (width 0.05))
    (fp_circle (center 3.81 2.54) (end 5.5626 2.54) (layer B.SilkS) (width 0.15))
    (fp_line (start -1.05 6.1595) (end 8.6995 6.1595) (layer B.CrtYd) (width 0.05))
    (pad 1 thru_hole circle (at 7.62 0 90) (size 2 2) (drill 1) (layers *.Cu *.Mask)
      (net 10 "Net-(R5-Pad1)"))
    (pad 2 thru_hole circle (at 0 0 90) (size 2 2) (drill 1) (layers *.Cu *.Mask)
      (net 4 +3V3))
    (pad 3 thru_hole circle (at 7.62 5.08 90) (size 2 2) (drill 1) (layers *.Cu *.Mask)
      (net 10 "Net-(R5-Pad1)"))
    (pad 4 thru_hole circle (at 0 5.08 90) (size 2 2) (drill 1) (layers *.Cu *.Mask)
      (net 4 +3V3))
    (model ${BBLIB_3D}/NAMAE.3dshapes/NAMAE_JTP-1130P.step
      (offset (xyz 0.825 -0.475 0.1))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module NAMAE:NAMAE_JTP-1130P (layer B.Cu) (tedit 5A0C2FC7) (tstamp 5DF95BAE)
    (at 111.5695 39.0525 90)
    (path /5DFAE8E1)
    (fp_text reference SW2 (at 9.8425 5.08 180) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SW_Push_Dual (at 3.5 7 90) (layer B.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)) (justify mirror))
    )
    (fp_arc (start 0.81 5.54) (end 0.81 4.24) (angle 90) (layer B.SilkS) (width 0.15))
    (fp_arc (start 6.81 5.54) (end 5.51 5.54) (angle 90) (layer B.SilkS) (width 0.15))
    (fp_arc (start 6.81 -0.46) (end 6.81 0.84) (angle 90) (layer B.SilkS) (width 0.15))
    (fp_arc (start 0.81 -0.46) (end 2.11 -0.46) (angle 90) (layer B.SilkS) (width 0.15))
    (fp_line (start 6.81 4.24) (end 6.81 0.84) (layer B.SilkS) (width 0.15))
    (fp_line (start 0.81 0.84) (end 0.81 4.24) (layer B.SilkS) (width 0.15))
    (fp_line (start 2.11 5.54) (end 5.51 5.54) (layer B.SilkS) (width 0.15))
    (fp_line (start 2.11 -0.46) (end 5.51 -0.46) (layer B.SilkS) (width 0.15))
    (fp_line (start -1.05 -1.15) (end 8.6995 -1.15) (layer B.CrtYd) (width 0.05))
    (fp_line (start 8.6995 6.1595) (end 8.6995 -1.15) (layer B.CrtYd) (width 0.05))
    (fp_line (start -1.05 6.1595) (end -1.05 -1.15) (layer B.CrtYd) (width 0.05))
    (fp_circle (center 3.81 2.54) (end 5.5626 2.54) (layer B.SilkS) (width 0.15))
    (fp_line (start -1.05 6.1595) (end 8.6995 6.1595) (layer B.CrtYd) (width 0.05))
    (pad 1 thru_hole circle (at 7.62 0 90) (size 2 2) (drill 1) (layers *.Cu *.Mask)
      (net 11 "Net-(R6-Pad1)"))
    (pad 2 thru_hole circle (at 0 0 90) (size 2 2) (drill 1) (layers *.Cu *.Mask)
      (net 4 +3V3))
    (pad 3 thru_hole circle (at 7.62 5.08 90) (size 2 2) (drill 1) (layers *.Cu *.Mask)
      (net 11 "Net-(R6-Pad1)"))
    (pad 4 thru_hole circle (at 0 5.08 90) (size 2 2) (drill 1) (layers *.Cu *.Mask)
      (net 4 +3V3))
    (model ${BBLIB_3D}/NAMAE.3dshapes/NAMAE_JTP-1130P.step
      (offset (xyz 0.825 -0.475 0.1))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Package_SO:SOIC-8_3.9x4.9mm_P1.27mm (layer F.Cu) (tedit 5D9F72B1) (tstamp 5E008994)
    (at 31.7485 38.481 180)
    (descr "SOIC, 8 Pin (JEDEC MS-012AA, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/soic_narrow-r/r_8.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py")
    (tags "SOIC SO")
    (path /5DF98E30)
    (attr smd)
    (fp_text reference U1 (at -0.0015 3.81 180) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value LM2672M-5.0 (at 0 3.4) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.98 0.98) (thickness 0.15)))
    )
    (fp_line (start 3.7 -2.7) (end -3.7 -2.7) (layer F.CrtYd) (width 0.05))
    (fp_line (start 3.7 2.7) (end 3.7 -2.7) (layer F.CrtYd) (width 0.05))
    (fp_line (start -3.7 2.7) (end 3.7 2.7) (layer F.CrtYd) (width 0.05))
    (fp_line (start -3.7 -2.7) (end -3.7 2.7) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.95 -1.475) (end -0.975 -2.45) (layer F.Fab) (width 0.1))
    (fp_line (start -1.95 2.45) (end -1.95 -1.475) (layer F.Fab) (width 0.1))
    (fp_line (start 1.95 2.45) (end -1.95 2.45) (layer F.Fab) (width 0.1))
    (fp_line (start 1.95 -2.45) (end 1.95 2.45) (layer F.Fab) (width 0.1))
    (fp_line (start -0.975 -2.45) (end 1.95 -2.45) (layer F.Fab) (width 0.1))
    (fp_line (start 0 -2.56) (end -3.45 -2.56) (layer F.SilkS) (width 0.12))
    (fp_line (start 0 -2.56) (end 1.95 -2.56) (layer F.SilkS) (width 0.12))
    (fp_line (start 0 2.56) (end -1.95 2.56) (layer F.SilkS) (width 0.12))
    (fp_line (start 0 2.56) (end 1.95 2.56) (layer F.SilkS) (width 0.12))
    (pad 8 smd roundrect (at 2.475 -1.905 180) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
      (net 41 "Net-(C3-Pad1)"))
    (pad 7 smd roundrect (at 2.475 -0.635 180) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
      (net 69 /VIN))
    (pad 6 smd roundrect (at 2.475 0.635 180) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
      (net 1 GND))
    (pad 5 smd roundrect (at 2.475 1.905 180) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
      (net 6 "Net-(U1-Pad5)"))
    (pad 4 smd roundrect (at -2.475 1.905 180) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
      (net 2 +5V))
    (pad 3 smd roundrect (at -2.475 0.635 180) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
      (net 5 "Net-(U1-Pad3)"))
    (pad 2 smd roundrect (at -2.475 -0.635 180) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
      (net 26 "Net-(U1-Pad2)"))
    (pad 1 smd roundrect (at -2.475 -1.905 180) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
      (net 40 "Net-(C3-Pad2)"))
    (model ${KISYS3DMOD}/Package_SO.3dshapes/SOIC-8_3.9x4.9mm_P1.27mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module TestPoint:TestPoint_Pad_D1.5mm (layer F.Cu) (tedit 5A0F774F) (tstamp 5DF83A19)
    (at 111.8235 67.7545)
    (descr "SMD pad as test Point, diameter 1.5mm")
    (tags "test point SMD pad")
    (path /5DFC7FE4)
    (attr virtual)
    (fp_text reference TS8 (at 0 -1.648) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value TestPoint (at 0 1.75) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0 0.95) (layer F.SilkS) (width 0.12))
    (fp_circle (center 0 0) (end 1.25 0) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 -1.65) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (pad 1 smd circle (at 0 0) (size 1.5 1.5) (layers F.Cu F.Mask)
      (net 21 /SIGNAL8))
  )

  (module TestPoint:TestPoint_Pad_D1.5mm (layer F.Cu) (tedit 5A0F774F) (tstamp 5DF83A11)
    (at 102.8065 67.7545)
    (descr "SMD pad as test Point, diameter 1.5mm")
    (tags "test point SMD pad")
    (path /5DFC7FDC)
    (attr virtual)
    (fp_text reference TS7 (at 0 -1.648) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value TestPoint (at 0 1.75) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0 0.95) (layer F.SilkS) (width 0.12))
    (fp_circle (center 0 0) (end 1.25 0) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 -1.65) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (pad 1 smd circle (at 0 0) (size 1.5 1.5) (layers F.Cu F.Mask)
      (net 20 /SIGNAL7))
  )

  (module TestPoint:TestPoint_Pad_D1.5mm (layer F.Cu) (tedit 5A0F774F) (tstamp 5DF83A09)
    (at 93.853 67.7545)
    (descr "SMD pad as test Point, diameter 1.5mm")
    (tags "test point SMD pad")
    (path /5DFC7FD4)
    (attr virtual)
    (fp_text reference TS6 (at 0 -1.648) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value TestPoint (at 0 1.75) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0 0.95) (layer F.SilkS) (width 0.12))
    (fp_circle (center 0 0) (end 1.25 0) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 -1.65) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (pad 1 smd circle (at 0 0) (size 1.5 1.5) (layers F.Cu F.Mask)
      (net 19 /SIGNAL6))
  )

  (module TestPoint:TestPoint_Pad_D1.5mm (layer F.Cu) (tedit 5A0F774F) (tstamp 5DF83A01)
    (at 84.836 67.7545)
    (descr "SMD pad as test Point, diameter 1.5mm")
    (tags "test point SMD pad")
    (path /5DFC7FCC)
    (attr virtual)
    (fp_text reference TS5 (at 0 -1.648) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value TestPoint (at 0 1.75) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0 0.95) (layer F.SilkS) (width 0.12))
    (fp_circle (center 0 0) (end 1.25 0) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 -1.65) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (pad 1 smd circle (at 0 0) (size 1.5 1.5) (layers F.Cu F.Mask)
      (net 18 /SIGNAL5))
  )

  (module TestPoint:TestPoint_Pad_D1.5mm (layer F.Cu) (tedit 5A0F774F) (tstamp 5DF839F9)
    (at 75.819 67.7545)
    (descr "SMD pad as test Point, diameter 1.5mm")
    (tags "test point SMD pad")
    (path /5DFC7FC4)
    (attr virtual)
    (fp_text reference TS4 (at 0 -1.648) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value TestPoint (at 0 1.75) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0 0.95) (layer F.SilkS) (width 0.12))
    (fp_circle (center 0 0) (end 1.25 0) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 -1.65) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (pad 1 smd circle (at 0 0) (size 1.5 1.5) (layers F.Cu F.Mask)
      (net 17 /SIGNAL4))
  )

  (module TestPoint:TestPoint_Pad_D1.5mm (layer F.Cu) (tedit 5A0F774F) (tstamp 5DF839F1)
    (at 66.802 67.7545)
    (descr "SMD pad as test Point, diameter 1.5mm")
    (tags "test point SMD pad")
    (path /5DFC7FBC)
    (attr virtual)
    (fp_text reference TS3 (at 0 -1.648) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value TestPoint (at 0 1.75) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0 0.95) (layer F.SilkS) (width 0.12))
    (fp_circle (center 0 0) (end 1.25 0) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 -1.65) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (pad 1 smd circle (at 0 0) (size 1.5 1.5) (layers F.Cu F.Mask)
      (net 16 /SIGNAL3))
  )

  (module TestPoint:TestPoint_Pad_D1.5mm (layer F.Cu) (tedit 5A0F774F) (tstamp 5DF839E9)
    (at 57.785 67.7545)
    (descr "SMD pad as test Point, diameter 1.5mm")
    (tags "test point SMD pad")
    (path /5DFC7FB4)
    (attr virtual)
    (fp_text reference TS2 (at 0 -1.648) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value TestPoint (at 0 1.75) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0 0.95) (layer F.SilkS) (width 0.12))
    (fp_circle (center 0 0) (end 1.25 0) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 -1.65) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (pad 1 smd circle (at 0 0) (size 1.5 1.5) (layers F.Cu F.Mask)
      (net 15 /SIGNAL2))
  )

  (module TestPoint:TestPoint_Pad_D1.5mm (layer F.Cu) (tedit 5A0F774F) (tstamp 5DF839E1)
    (at 48.8315 67.7545)
    (descr "SMD pad as test Point, diameter 1.5mm")
    (tags "test point SMD pad")
    (path /5DFC7FAC)
    (attr virtual)
    (fp_text reference TS1 (at 0 -1.648) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value TestPoint (at 0 1.75) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0 0.95) (layer F.SilkS) (width 0.12))
    (fp_circle (center 0 0) (end 1.25 0) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 -1.65) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (pad 1 smd circle (at 0 0) (size 1.5 1.5) (layers F.Cu F.Mask)
      (net 14 /SIGNAL1))
  )

  (module TestPoint:TestPoint_Pad_D1.0mm (layer F.Cu) (tedit 5A0F774F) (tstamp 5DF839D9)
    (at 40.64 34.29)
    (descr "SMD pad as test Point, diameter 1.0mm")
    (tags "test point SMD pad")
    (path /5DF98E1C)
    (attr virtual)
    (fp_text reference TP1 (at 2.3495 0) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value TestPoint (at 0 1.55) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0 0.7) (layer F.SilkS) (width 0.12))
    (fp_circle (center 0 0) (end 1 0) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 -1.45) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (pad 1 smd circle (at 0 0) (size 1 1) (layers F.Cu F.Mask)
      (net 2 +5V))
  )

  (module Lumberg:LUMBERG_1501_05 (layer F.Cu) (tedit 5D781B95) (tstamp 5DF839D1)
    (at 107.315 77.7545 180)
    (descr "Klinkeneinbaukupplung nach JIS C 6560 JC25J3A, 2,5 mm, 3-polig/stereo, abgewinkelte Ausführung, mit Kunststoffkragen, für Leiterplatten")
    (tags AudioJack3)
    (path /5DFC7F4D)
    (fp_text reference TH8 (at 0 0.5) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value AudioJack3 (at 0 -0.5) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start -3 0) (end 3 0) (layer F.CrtYd) (width 0.12))
    (fp_line (start -2.5 0) (end 2.5 0) (layer F.SilkS) (width 0.25))
    (fp_line (start 3 11) (end 3 0) (layer F.CrtYd) (width 0.12))
    (fp_line (start -3 11) (end 3 11) (layer F.CrtYd) (width 0.12))
    (fp_line (start -3 0) (end -3 11) (layer F.CrtYd) (width 0.12))
    (fp_line (start 2.5 10) (end 2.5 8) (layer F.SilkS) (width 0.25))
    (fp_line (start 1.2 10) (end 2.5 10) (layer F.SilkS) (width 0.25))
    (fp_line (start -2.5 10) (end -1.2 10) (layer F.SilkS) (width 0.25))
    (fp_line (start -2.5 8) (end -2.5 10) (layer F.SilkS) (width 0.25))
    (fp_line (start 2.5 5.8) (end 2.5 3.3) (layer F.SilkS) (width 0.25))
    (fp_line (start -2.5 3.3) (end -2.5 5.8) (layer F.SilkS) (width 0.25))
    (fp_line (start 2.5 0) (end 2.5 1.2) (layer F.SilkS) (width 0.25))
    (fp_line (start -2.5 0) (end -2.5 1.2) (layer F.SilkS) (width 0.25))
    (pad R thru_hole roundrect (at -1.9 6.9 180) (size 1.2 2.1) (drill oval 0.6 1.4) (layers *.Cu *.Mask) (roundrect_rratio 0.25)
      (net 2 +5V))
    (pad T thru_hole roundrect (at 0 10 180) (size 2.1 1.2) (drill oval 1.4 0.6) (layers *.Cu *.Mask) (roundrect_rratio 0.25)
      (net 21 /SIGNAL8))
    (pad S thru_hole roundrect (at 1.9 6.9 180) (size 1.2 2.1) (drill oval 0.6 1.4) (layers *.Cu *.Mask) (roundrect_rratio 0.25)
      (net 1 GND))
    (pad "" np_thru_hole oval (at -2 2.25 180) (size 1.5 2) (drill oval 1.5 2) (layers *.Cu *.Mask))
    (pad "" np_thru_hole oval (at 2 2.25 180) (size 1.5 2) (drill oval 1.5 2) (layers *.Cu *.Mask))
    (model ${BBLIB_3D_NONFREE}/Lumberg.3dshapes/1501_05.stp
      (offset (xyz 0 0 2.2))
      (scale (xyz 1 1 1))
      (rotate (xyz 90 180 0))
    )
  )

  (module Lumberg:LUMBERG_1501_05 (layer F.Cu) (tedit 5D781B95) (tstamp 5DF839BB)
    (at 98.315 77.7545 180)
    (descr "Klinkeneinbaukupplung nach JIS C 6560 JC25J3A, 2,5 mm, 3-polig/stereo, abgewinkelte Ausführung, mit Kunststoffkragen, für Leiterplatten")
    (tags AudioJack3)
    (path /5DFC7F47)
    (fp_text reference TH7 (at 0 0.5) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value AudioJack3 (at 0 -0.5) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start -3 0) (end 3 0) (layer F.CrtYd) (width 0.12))
    (fp_line (start -2.5 0) (end 2.5 0) (layer F.SilkS) (width 0.25))
    (fp_line (start 3 11) (end 3 0) (layer F.CrtYd) (width 0.12))
    (fp_line (start -3 11) (end 3 11) (layer F.CrtYd) (width 0.12))
    (fp_line (start -3 0) (end -3 11) (layer F.CrtYd) (width 0.12))
    (fp_line (start 2.5 10) (end 2.5 8) (layer F.SilkS) (width 0.25))
    (fp_line (start 1.2 10) (end 2.5 10) (layer F.SilkS) (width 0.25))
    (fp_line (start -2.5 10) (end -1.2 10) (layer F.SilkS) (width 0.25))
    (fp_line (start -2.5 8) (end -2.5 10) (layer F.SilkS) (width 0.25))
    (fp_line (start 2.5 5.8) (end 2.5 3.3) (layer F.SilkS) (width 0.25))
    (fp_line (start -2.5 3.3) (end -2.5 5.8) (layer F.SilkS) (width 0.25))
    (fp_line (start 2.5 0) (end 2.5 1.2) (layer F.SilkS) (width 0.25))
    (fp_line (start -2.5 0) (end -2.5 1.2) (layer F.SilkS) (width 0.25))
    (pad R thru_hole roundrect (at -1.9 6.9 180) (size 1.2 2.1) (drill oval 0.6 1.4) (layers *.Cu *.Mask) (roundrect_rratio 0.25)
      (net 2 +5V))
    (pad T thru_hole roundrect (at 0 10 180) (size 2.1 1.2) (drill oval 1.4 0.6) (layers *.Cu *.Mask) (roundrect_rratio 0.25)
      (net 20 /SIGNAL7))
    (pad S thru_hole roundrect (at 1.9 6.9 180) (size 1.2 2.1) (drill oval 0.6 1.4) (layers *.Cu *.Mask) (roundrect_rratio 0.25)
      (net 1 GND))
    (pad "" np_thru_hole oval (at -2 2.25 180) (size 1.5 2) (drill oval 1.5 2) (layers *.Cu *.Mask))
    (pad "" np_thru_hole oval (at 2 2.25 180) (size 1.5 2) (drill oval 1.5 2) (layers *.Cu *.Mask))
    (model ${BBLIB_3D_NONFREE}/Lumberg.3dshapes/1501_05.stp
      (offset (xyz 0 0 2.2))
      (scale (xyz 1 1 1))
      (rotate (xyz 90 180 0))
    )
  )

  (module Lumberg:LUMBERG_1501_05 (layer F.Cu) (tedit 5D781B95) (tstamp 5DF839A5)
    (at 89.315 77.7545 180)
    (descr "Klinkeneinbaukupplung nach JIS C 6560 JC25J3A, 2,5 mm, 3-polig/stereo, abgewinkelte Ausführung, mit Kunststoffkragen, für Leiterplatten")
    (tags AudioJack3)
    (path /5DFC7F41)
    (fp_text reference TH6 (at 0 0.5) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value AudioJack3 (at 0 -0.5) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start -3 0) (end 3 0) (layer F.CrtYd) (width 0.12))
    (fp_line (start -2.5 0) (end 2.5 0) (layer F.SilkS) (width 0.25))
    (fp_line (start 3 11) (end 3 0) (layer F.CrtYd) (width 0.12))
    (fp_line (start -3 11) (end 3 11) (layer F.CrtYd) (width 0.12))
    (fp_line (start -3 0) (end -3 11) (layer F.CrtYd) (width 0.12))
    (fp_line (start 2.5 10) (end 2.5 8) (layer F.SilkS) (width 0.25))
    (fp_line (start 1.2 10) (end 2.5 10) (layer F.SilkS) (width 0.25))
    (fp_line (start -2.5 10) (end -1.2 10) (layer F.SilkS) (width 0.25))
    (fp_line (start -2.5 8) (end -2.5 10) (layer F.SilkS) (width 0.25))
    (fp_line (start 2.5 5.8) (end 2.5 3.3) (layer F.SilkS) (width 0.25))
    (fp_line (start -2.5 3.3) (end -2.5 5.8) (layer F.SilkS) (width 0.25))
    (fp_line (start 2.5 0) (end 2.5 1.2) (layer F.SilkS) (width 0.25))
    (fp_line (start -2.5 0) (end -2.5 1.2) (layer F.SilkS) (width 0.25))
    (pad R thru_hole roundrect (at -1.9 6.9 180) (size 1.2 2.1) (drill oval 0.6 1.4) (layers *.Cu *.Mask) (roundrect_rratio 0.25)
      (net 2 +5V))
    (pad T thru_hole roundrect (at 0 10 180) (size 2.1 1.2) (drill oval 1.4 0.6) (layers *.Cu *.Mask) (roundrect_rratio 0.25)
      (net 19 /SIGNAL6))
    (pad S thru_hole roundrect (at 1.9 6.9 180) (size 1.2 2.1) (drill oval 0.6 1.4) (layers *.Cu *.Mask) (roundrect_rratio 0.25)
      (net 1 GND))
    (pad "" np_thru_hole oval (at -2 2.25 180) (size 1.5 2) (drill oval 1.5 2) (layers *.Cu *.Mask))
    (pad "" np_thru_hole oval (at 2 2.25 180) (size 1.5 2) (drill oval 1.5 2) (layers *.Cu *.Mask))
    (model ${BBLIB_3D_NONFREE}/Lumberg.3dshapes/1501_05.stp
      (offset (xyz 0 0 2.2))
      (scale (xyz 1 1 1))
      (rotate (xyz 90 180 0))
    )
  )

  (module Lumberg:LUMBERG_1501_05 (layer F.Cu) (tedit 5D781B95) (tstamp 5DF8398F)
    (at 80.315 77.7545 180)
    (descr "Klinkeneinbaukupplung nach JIS C 6560 JC25J3A, 2,5 mm, 3-polig/stereo, abgewinkelte Ausführung, mit Kunststoffkragen, für Leiterplatten")
    (tags AudioJack3)
    (path /5DFC7F3B)
    (fp_text reference TH5 (at 0 0.5) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value AudioJack3 (at 0 -0.5) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start -3 0) (end 3 0) (layer F.CrtYd) (width 0.12))
    (fp_line (start -2.5 0) (end 2.5 0) (layer F.SilkS) (width 0.25))
    (fp_line (start 3 11) (end 3 0) (layer F.CrtYd) (width 0.12))
    (fp_line (start -3 11) (end 3 11) (layer F.CrtYd) (width 0.12))
    (fp_line (start -3 0) (end -3 11) (layer F.CrtYd) (width 0.12))
    (fp_line (start 2.5 10) (end 2.5 8) (layer F.SilkS) (width 0.25))
    (fp_line (start 1.2 10) (end 2.5 10) (layer F.SilkS) (width 0.25))
    (fp_line (start -2.5 10) (end -1.2 10) (layer F.SilkS) (width 0.25))
    (fp_line (start -2.5 8) (end -2.5 10) (layer F.SilkS) (width 0.25))
    (fp_line (start 2.5 5.8) (end 2.5 3.3) (layer F.SilkS) (width 0.25))
    (fp_line (start -2.5 3.3) (end -2.5 5.8) (layer F.SilkS) (width 0.25))
    (fp_line (start 2.5 0) (end 2.5 1.2) (layer F.SilkS) (width 0.25))
    (fp_line (start -2.5 0) (end -2.5 1.2) (layer F.SilkS) (width 0.25))
    (pad R thru_hole roundrect (at -1.9 6.9 180) (size 1.2 2.1) (drill oval 0.6 1.4) (layers *.Cu *.Mask) (roundrect_rratio 0.25)
      (net 2 +5V))
    (pad T thru_hole roundrect (at 0 10 180) (size 2.1 1.2) (drill oval 1.4 0.6) (layers *.Cu *.Mask) (roundrect_rratio 0.25)
      (net 18 /SIGNAL5))
    (pad S thru_hole roundrect (at 1.9 6.9 180) (size 1.2 2.1) (drill oval 0.6 1.4) (layers *.Cu *.Mask) (roundrect_rratio 0.25)
      (net 1 GND))
    (pad "" np_thru_hole oval (at -2 2.25 180) (size 1.5 2) (drill oval 1.5 2) (layers *.Cu *.Mask))
    (pad "" np_thru_hole oval (at 2 2.25 180) (size 1.5 2) (drill oval 1.5 2) (layers *.Cu *.Mask))
    (model ${BBLIB_3D_NONFREE}/Lumberg.3dshapes/1501_05.stp
      (offset (xyz 0 0 2.2))
      (scale (xyz 1 1 1))
      (rotate (xyz 90 180 0))
    )
  )

  (module Lumberg:LUMBERG_1501_05 (layer F.Cu) (tedit 5D781B95) (tstamp 5DF83979)
    (at 71.315 77.7545 180)
    (descr "Klinkeneinbaukupplung nach JIS C 6560 JC25J3A, 2,5 mm, 3-polig/stereo, abgewinkelte Ausführung, mit Kunststoffkragen, für Leiterplatten")
    (tags AudioJack3)
    (path /5DFC7F35)
    (fp_text reference TH4 (at 0 0.5) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value AudioJack3 (at 0 -0.5) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start -3 0) (end 3 0) (layer F.CrtYd) (width 0.12))
    (fp_line (start -2.5 0) (end 2.5 0) (layer F.SilkS) (width 0.25))
    (fp_line (start 3 11) (end 3 0) (layer F.CrtYd) (width 0.12))
    (fp_line (start -3 11) (end 3 11) (layer F.CrtYd) (width 0.12))
    (fp_line (start -3 0) (end -3 11) (layer F.CrtYd) (width 0.12))
    (fp_line (start 2.5 10) (end 2.5 8) (layer F.SilkS) (width 0.25))
    (fp_line (start 1.2 10) (end 2.5 10) (layer F.SilkS) (width 0.25))
    (fp_line (start -2.5 10) (end -1.2 10) (layer F.SilkS) (width 0.25))
    (fp_line (start -2.5 8) (end -2.5 10) (layer F.SilkS) (width 0.25))
    (fp_line (start 2.5 5.8) (end 2.5 3.3) (layer F.SilkS) (width 0.25))
    (fp_line (start -2.5 3.3) (end -2.5 5.8) (layer F.SilkS) (width 0.25))
    (fp_line (start 2.5 0) (end 2.5 1.2) (layer F.SilkS) (width 0.25))
    (fp_line (start -2.5 0) (end -2.5 1.2) (layer F.SilkS) (width 0.25))
    (pad R thru_hole roundrect (at -1.9 6.9 180) (size 1.2 2.1) (drill oval 0.6 1.4) (layers *.Cu *.Mask) (roundrect_rratio 0.25)
      (net 2 +5V))
    (pad T thru_hole roundrect (at 0 10 180) (size 2.1 1.2) (drill oval 1.4 0.6) (layers *.Cu *.Mask) (roundrect_rratio 0.25)
      (net 17 /SIGNAL4))
    (pad S thru_hole roundrect (at 1.9 6.9 180) (size 1.2 2.1) (drill oval 0.6 1.4) (layers *.Cu *.Mask) (roundrect_rratio 0.25)
      (net 1 GND))
    (pad "" np_thru_hole oval (at -2 2.25 180) (size 1.5 2) (drill oval 1.5 2) (layers *.Cu *.Mask))
    (pad "" np_thru_hole oval (at 2 2.25 180) (size 1.5 2) (drill oval 1.5 2) (layers *.Cu *.Mask))
    (model ${BBLIB_3D_NONFREE}/Lumberg.3dshapes/1501_05.stp
      (offset (xyz 0 0 2.2))
      (scale (xyz 1 1 1))
      (rotate (xyz 90 180 0))
    )
  )

  (module Lumberg:LUMBERG_1501_05 (layer F.Cu) (tedit 5D781B95) (tstamp 5DF83963)
    (at 62.315 77.7545 180)
    (descr "Klinkeneinbaukupplung nach JIS C 6560 JC25J3A, 2,5 mm, 3-polig/stereo, abgewinkelte Ausführung, mit Kunststoffkragen, für Leiterplatten")
    (tags AudioJack3)
    (path /5DFC7F2F)
    (fp_text reference TH3 (at 0 0.5) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value AudioJack3 (at 0 -0.5) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start -3 0) (end 3 0) (layer F.CrtYd) (width 0.12))
    (fp_line (start -2.5 0) (end 2.5 0) (layer F.SilkS) (width 0.25))
    (fp_line (start 3 11) (end 3 0) (layer F.CrtYd) (width 0.12))
    (fp_line (start -3 11) (end 3 11) (layer F.CrtYd) (width 0.12))
    (fp_line (start -3 0) (end -3 11) (layer F.CrtYd) (width 0.12))
    (fp_line (start 2.5 10) (end 2.5 8) (layer F.SilkS) (width 0.25))
    (fp_line (start 1.2 10) (end 2.5 10) (layer F.SilkS) (width 0.25))
    (fp_line (start -2.5 10) (end -1.2 10) (layer F.SilkS) (width 0.25))
    (fp_line (start -2.5 8) (end -2.5 10) (layer F.SilkS) (width 0.25))
    (fp_line (start 2.5 5.8) (end 2.5 3.3) (layer F.SilkS) (width 0.25))
    (fp_line (start -2.5 3.3) (end -2.5 5.8) (layer F.SilkS) (width 0.25))
    (fp_line (start 2.5 0) (end 2.5 1.2) (layer F.SilkS) (width 0.25))
    (fp_line (start -2.5 0) (end -2.5 1.2) (layer F.SilkS) (width 0.25))
    (pad R thru_hole roundrect (at -1.9 6.9 180) (size 1.2 2.1) (drill oval 0.6 1.4) (layers *.Cu *.Mask) (roundrect_rratio 0.25)
      (net 2 +5V))
    (pad T thru_hole roundrect (at 0 10 180) (size 2.1 1.2) (drill oval 1.4 0.6) (layers *.Cu *.Mask) (roundrect_rratio 0.25)
      (net 16 /SIGNAL3))
    (pad S thru_hole roundrect (at 1.9 6.9 180) (size 1.2 2.1) (drill oval 0.6 1.4) (layers *.Cu *.Mask) (roundrect_rratio 0.25)
      (net 1 GND))
    (pad "" np_thru_hole oval (at -2 2.25 180) (size 1.5 2) (drill oval 1.5 2) (layers *.Cu *.Mask))
    (pad "" np_thru_hole oval (at 2 2.25 180) (size 1.5 2) (drill oval 1.5 2) (layers *.Cu *.Mask))
    (model ${BBLIB_3D_NONFREE}/Lumberg.3dshapes/1501_05.stp
      (offset (xyz 0 0 2.2))
      (scale (xyz 1 1 1))
      (rotate (xyz 90 180 0))
    )
  )

  (module Lumberg:LUMBERG_1501_05 (layer F.Cu) (tedit 5D781B95) (tstamp 5DF8394D)
    (at 53.315 77.7545 180)
    (descr "Klinkeneinbaukupplung nach JIS C 6560 JC25J3A, 2,5 mm, 3-polig/stereo, abgewinkelte Ausführung, mit Kunststoffkragen, für Leiterplatten")
    (tags AudioJack3)
    (path /5DFC7F29)
    (fp_text reference TH2 (at 0 0.5) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value AudioJack3 (at 0 -0.5) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start -3 0) (end 3 0) (layer F.CrtYd) (width 0.12))
    (fp_line (start -2.5 0) (end 2.5 0) (layer F.SilkS) (width 0.25))
    (fp_line (start 3 11) (end 3 0) (layer F.CrtYd) (width 0.12))
    (fp_line (start -3 11) (end 3 11) (layer F.CrtYd) (width 0.12))
    (fp_line (start -3 0) (end -3 11) (layer F.CrtYd) (width 0.12))
    (fp_line (start 2.5 10) (end 2.5 8) (layer F.SilkS) (width 0.25))
    (fp_line (start 1.2 10) (end 2.5 10) (layer F.SilkS) (width 0.25))
    (fp_line (start -2.5 10) (end -1.2 10) (layer F.SilkS) (width 0.25))
    (fp_line (start -2.5 8) (end -2.5 10) (layer F.SilkS) (width 0.25))
    (fp_line (start 2.5 5.8) (end 2.5 3.3) (layer F.SilkS) (width 0.25))
    (fp_line (start -2.5 3.3) (end -2.5 5.8) (layer F.SilkS) (width 0.25))
    (fp_line (start 2.5 0) (end 2.5 1.2) (layer F.SilkS) (width 0.25))
    (fp_line (start -2.5 0) (end -2.5 1.2) (layer F.SilkS) (width 0.25))
    (pad R thru_hole roundrect (at -1.9 6.9 180) (size 1.2 2.1) (drill oval 0.6 1.4) (layers *.Cu *.Mask) (roundrect_rratio 0.25)
      (net 2 +5V))
    (pad T thru_hole roundrect (at 0 10 180) (size 2.1 1.2) (drill oval 1.4 0.6) (layers *.Cu *.Mask) (roundrect_rratio 0.25)
      (net 15 /SIGNAL2))
    (pad S thru_hole roundrect (at 1.9 6.9 180) (size 1.2 2.1) (drill oval 0.6 1.4) (layers *.Cu *.Mask) (roundrect_rratio 0.25)
      (net 1 GND))
    (pad "" np_thru_hole oval (at -2 2.25 180) (size 1.5 2) (drill oval 1.5 2) (layers *.Cu *.Mask))
    (pad "" np_thru_hole oval (at 2 2.25 180) (size 1.5 2) (drill oval 1.5 2) (layers *.Cu *.Mask))
    (model ${BBLIB_3D_NONFREE}/Lumberg.3dshapes/1501_05.stp
      (offset (xyz 0 0 2.2))
      (scale (xyz 1 1 1))
      (rotate (xyz 90 180 0))
    )
  )

  (module Lumberg:LUMBERG_1501_05 (layer F.Cu) (tedit 5D781B95) (tstamp 5DF83937)
    (at 44.315 77.7545 180)
    (descr "Klinkeneinbaukupplung nach JIS C 6560 JC25J3A, 2,5 mm, 3-polig/stereo, abgewinkelte Ausführung, mit Kunststoffkragen, für Leiterplatten")
    (tags AudioJack3)
    (path /5DFC7F23)
    (fp_text reference TH1 (at 0 0.5) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value AudioJack3 (at 0 -0.5) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start -3 0) (end 3 0) (layer F.CrtYd) (width 0.12))
    (fp_line (start -2.5 0) (end 2.5 0) (layer F.SilkS) (width 0.25))
    (fp_line (start 3 11) (end 3 0) (layer F.CrtYd) (width 0.12))
    (fp_line (start -3 11) (end 3 11) (layer F.CrtYd) (width 0.12))
    (fp_line (start -3 0) (end -3 11) (layer F.CrtYd) (width 0.12))
    (fp_line (start 2.5 10) (end 2.5 8) (layer F.SilkS) (width 0.25))
    (fp_line (start 1.2 10) (end 2.5 10) (layer F.SilkS) (width 0.25))
    (fp_line (start -2.5 10) (end -1.2 10) (layer F.SilkS) (width 0.25))
    (fp_line (start -2.5 8) (end -2.5 10) (layer F.SilkS) (width 0.25))
    (fp_line (start 2.5 5.8) (end 2.5 3.3) (layer F.SilkS) (width 0.25))
    (fp_line (start -2.5 3.3) (end -2.5 5.8) (layer F.SilkS) (width 0.25))
    (fp_line (start 2.5 0) (end 2.5 1.2) (layer F.SilkS) (width 0.25))
    (fp_line (start -2.5 0) (end -2.5 1.2) (layer F.SilkS) (width 0.25))
    (pad R thru_hole roundrect (at -1.9 6.9 180) (size 1.2 2.1) (drill oval 0.6 1.4) (layers *.Cu *.Mask) (roundrect_rratio 0.25)
      (net 2 +5V))
    (pad T thru_hole roundrect (at 0 10 180) (size 2.1 1.2) (drill oval 1.4 0.6) (layers *.Cu *.Mask) (roundrect_rratio 0.25)
      (net 14 /SIGNAL1))
    (pad S thru_hole roundrect (at 1.9 6.9 180) (size 1.2 2.1) (drill oval 0.6 1.4) (layers *.Cu *.Mask) (roundrect_rratio 0.25)
      (net 1 GND))
    (pad "" np_thru_hole oval (at -2 2.25 180) (size 1.5 2) (drill oval 1.5 2) (layers *.Cu *.Mask))
    (pad "" np_thru_hole oval (at 2 2.25 180) (size 1.5 2) (drill oval 1.5 2) (layers *.Cu *.Mask))
    (model ${BBLIB_3D_NONFREE}/Lumberg.3dshapes/1501_05.stp
      (offset (xyz 0 0 2.2))
      (scale (xyz 1 1 1))
      (rotate (xyz 90 180 0))
    )
  )

  (module Button_Switch_THT:SW_E-Switch_EG1224_SPDT_Angled (layer F.Cu) (tedit 5A02FE31) (tstamp 5DF838D5)
    (at 22.225 31.115 270)
    (descr "E-Switch slide switch, EG series, SPDT, right angle, http://spec_sheets.e-switch.com/specs/P040042.pdf")
    (tags "switch SPDT")
    (path /5DF98DED)
    (fp_text reference SW1 (at 12.065 -3.81 180) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SW_SPDT (at 4 14.45 90) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start -1.9 -2) (end 10.9 -2) (layer F.Fab) (width 0.1))
    (fp_line (start 10.9 -2) (end 10.9 4.5) (layer F.Fab) (width 0.1))
    (fp_line (start 10.9 4.5) (end -2.9 4.5) (layer F.Fab) (width 0.1))
    (fp_line (start -2.9 4.5) (end -2.9 -1) (layer F.Fab) (width 0.1))
    (fp_line (start 4.5 4.5) (end 4.5 13.5) (layer F.Fab) (width 0.1))
    (fp_line (start 4.5 13.5) (end -0.5 13.5) (layer F.Fab) (width 0.1))
    (fp_line (start -0.5 13.5) (end -0.5 4.5) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 4 1.25 90) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.1)))
    )
    (fp_line (start 11 -1.35) (end 11 3.85) (layer F.SilkS) (width 0.12))
    (fp_line (start -3 3.85) (end -3 -1.35) (layer F.SilkS) (width 0.12))
    (fp_line (start -0.95 -2.1) (end 8.95 -2.1) (layer F.SilkS) (width 0.12))
    (fp_line (start 8.95 4.6) (end -0.95 4.6) (layer F.SilkS) (width 0.12))
    (fp_line (start -3.25 -3) (end 11.25 -3) (layer F.CrtYd) (width 0.05))
    (fp_line (start 11.25 -3) (end 11.25 5.5) (layer F.CrtYd) (width 0.05))
    (fp_line (start 11.25 5.5) (end 8.75 5.5) (layer F.CrtYd) (width 0.05))
    (fp_line (start 8.75 5.5) (end 8.75 13.75) (layer F.CrtYd) (width 0.05))
    (fp_line (start 8.75 13.75) (end -0.75 13.75) (layer F.CrtYd) (width 0.05))
    (fp_line (start -0.75 13.75) (end -0.75 5.5) (layer F.CrtYd) (width 0.05))
    (fp_line (start -0.75 5.5) (end -3.25 5.5) (layer F.CrtYd) (width 0.05))
    (fp_line (start -3.25 5.5) (end -3.25 -3) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.9 -2) (end -2.9 -1) (layer F.Fab) (width 0.1))
    (fp_line (start -3.3 -1.75) (end -3.3 -3.05) (layer F.SilkS) (width 0.12))
    (fp_line (start -3.3 -3.05) (end -2 -3.05) (layer F.SilkS) (width 0.12))
    (pad 3 thru_hole circle (at 8 0 270) (size 1.7 1.7) (drill 0.9) (layers *.Cu *.Mask)
      (net 44 "Net-(SW1-Pad3)"))
    (pad 2 thru_hole circle (at 4 0 270) (size 1.7 1.7) (drill 0.9) (layers *.Cu *.Mask)
      (net 70 /VPOWER))
    (pad 1 thru_hole circle (at 0 0 270) (size 1.7 1.7) (drill 0.9) (layers *.Cu *.Mask)
      (net 3 "Net-(F1-Pad2)"))
    (pad "" thru_hole circle (at -2 4.25 270) (size 2 2) (drill 1.2) (layers *.Cu *.Mask))
    (pad "" thru_hole circle (at 10 4.25 270) (size 2 2) (drill 1.2) (layers *.Cu *.Mask))
    (pad "" thru_hole circle (at 10 -1.75 270) (size 2 2) (drill 1.2) (layers *.Cu *.Mask))
    (pad "" thru_hole circle (at -2 -1.75 270) (size 2 2) (drill 1.2) (layers *.Cu *.Mask))
    (model ${KISYS3DMOD}/Button_Switch_THT.3dshapes/SW_E-Switch_EG1224_SPDT_Angled.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Inductor_SMD:L_TDK_SLF7032 (layer F.Cu) (tedit 5C2392AD) (tstamp 5DF83801)
    (at 32.41 29.21)
    (descr "Inductor, TDK, SLF7032, 7.0mmx7.0mm (Script generated with StandardBox.py) (https://product.tdk.com/info/en/document/catalog/smd/inductor_commercial_power_slf7032_en.pdf)")
    (tags "Inductor TDK_SLF7032")
    (path /5DF98E09)
    (attr smd)
    (fp_text reference L1 (at -5.105 0) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value 47u (at 0 4.5) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text user "" (at -49 0.05) (layer F.SilkS)
      (effects (font (size 3 3) (thickness 0.15)))
    )
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start -3.75 1.36) (end -3.75 3.75) (layer F.CrtYd) (width 0.05))
    (fp_line (start -4.16 1.36) (end -3.75 1.36) (layer F.CrtYd) (width 0.05))
    (fp_line (start -4.16 -1.36) (end -4.16 1.36) (layer F.CrtYd) (width 0.05))
    (fp_line (start -3.75 -1.36) (end -4.16 -1.36) (layer F.CrtYd) (width 0.05))
    (fp_line (start -3.75 -3.75) (end -3.75 -1.36) (layer F.CrtYd) (width 0.05))
    (fp_line (start -3.75 3.75) (end 3.75 3.75) (layer F.CrtYd) (width 0.05))
    (fp_line (start 3.75 1.36) (end 3.75 3.75) (layer F.CrtYd) (width 0.05))
    (fp_line (start 4.16 1.36) (end 3.75 1.36) (layer F.CrtYd) (width 0.05))
    (fp_line (start 4.16 -1.36) (end 4.16 1.36) (layer F.CrtYd) (width 0.05))
    (fp_line (start 3.75 -1.36) (end 4.16 -1.36) (layer F.CrtYd) (width 0.05))
    (fp_line (start 3.75 -3.75) (end 3.75 -1.36) (layer F.CrtYd) (width 0.05))
    (fp_line (start -3.75 -3.75) (end 3.75 -3.75) (layer F.CrtYd) (width 0.05))
    (fp_line (start -3.62 1.35) (end -3.62 3.62) (layer F.SilkS) (width 0.12))
    (fp_line (start -3.62 -3.62) (end -3.62 -1.35) (layer F.SilkS) (width 0.12))
    (fp_line (start -3.62 3.62) (end 3.62 3.62) (layer F.SilkS) (width 0.12))
    (fp_line (start 3.62 1.35) (end 3.62 3.62) (layer F.SilkS) (width 0.12))
    (fp_line (start 3.62 -3.62) (end 3.62 -1.35) (layer F.SilkS) (width 0.12))
    (fp_line (start -3.62 -3.62) (end 3.62 -3.62) (layer F.SilkS) (width 0.12))
    (fp_line (start -4 -4) (end -1.666667 -4) (layer F.SilkS) (width 0.12))
    (fp_line (start -4 -1.666667) (end -4 -4) (layer F.SilkS) (width 0.12))
    (fp_line (start -3.5 -3) (end -3 -3.5) (layer F.Fab) (width 0.1))
    (fp_line (start -3.5 3.5) (end -3.5 -3) (layer F.Fab) (width 0.1))
    (fp_line (start 3.5 3.5) (end -3.5 3.5) (layer F.Fab) (width 0.1))
    (fp_line (start 3.5 -3.5) (end 3.5 3.5) (layer F.Fab) (width 0.1))
    (fp_line (start -3 -3.5) (end 3.5 -3.5) (layer F.Fab) (width 0.1))
    (pad 2 smd roundrect (at 3.15 0) (size 1.5 2.2) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
      (net 2 +5V))
    (pad 1 smd roundrect (at -3.15 0) (size 1.5 2.2) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
      (net 41 "Net-(C3-Pad1)"))
    (model ${KISYS3DMOD}/Inductor_SMD.3dshapes/L_TDK_SLF7032.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical (layer F.Cu) (tedit 59FED5CC) (tstamp 5DF837E0)
    (at 19.05 25.4635 90)
    (descr "Through hole straight pin header, 1x02, 2.54mm pitch, single row")
    (tags "Through hole pin header THT 1x02 2.54mm single row")
    (path /5DF98E28)
    (fp_text reference J1 (at 0 5.7785 180) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value POWER (at 0 4.87 90) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text user %R (at 0 1.27) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.8 -1.8) (end -1.8 -1.8) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.8 4.35) (end 1.8 -1.8) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.8 4.35) (end 1.8 4.35) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.8 -1.8) (end -1.8 4.35) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.33 -1.33) (end 0 -1.33) (layer F.SilkS) (width 0.12))
    (fp_line (start -1.33 0) (end -1.33 -1.33) (layer F.SilkS) (width 0.12))
    (fp_line (start -1.33 1.27) (end 1.33 1.27) (layer F.SilkS) (width 0.12))
    (fp_line (start 1.33 1.27) (end 1.33 3.87) (layer F.SilkS) (width 0.12))
    (fp_line (start -1.33 1.27) (end -1.33 3.87) (layer F.SilkS) (width 0.12))
    (fp_line (start -1.33 3.87) (end 1.33 3.87) (layer F.SilkS) (width 0.12))
    (fp_line (start -1.27 -0.635) (end -0.635 -1.27) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 3.81) (end -1.27 -0.635) (layer F.Fab) (width 0.1))
    (fp_line (start 1.27 3.81) (end -1.27 3.81) (layer F.Fab) (width 0.1))
    (fp_line (start 1.27 -1.27) (end 1.27 3.81) (layer F.Fab) (width 0.1))
    (fp_line (start -0.635 -1.27) (end 1.27 -1.27) (layer F.Fab) (width 0.1))
    (pad 2 thru_hole oval (at 0 2.54 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 1 GND))
    (pad 1 thru_hole rect (at 0 0 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 70 /VPOWER))
    (model ${KISYS3DMOD}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x02_P2.54mm_Vertical.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Schurter:Fuse_holder_20x5_22.5 (layer F.Cu) (tedit 5D647810) (tstamp 5DF837CA)
    (at 22.225 67.31 90)
    (descr http://www.schurter.com/var/schurter/storage/ilcatalogue/files/document/datasheet/en/pdf/typ_OGN.pdf)
    (tags "Fuseholder horizontal open 5x20 Schurter 0031.8201")
    (path /5DF98DC4)
    (fp_text reference F1 (at 23.7236 -3.6068 180) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value Fuse (at 11.25 6 90) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 0 4.8) (end 0 2) (layer F.SilkS) (width 0.15))
    (fp_line (start 22.75 1.95) (end 22.75 5.05) (layer F.CrtYd) (width 0.05))
    (fp_line (start 22.75 -1.95) (end 22.75 -5.05) (layer F.CrtYd) (width 0.05))
    (fp_line (start -0.25 -1.95) (end -0.25 -5.05) (layer F.CrtYd) (width 0.05))
    (fp_line (start 0 4.8) (end 22.5 4.8) (layer F.SilkS) (width 0.15))
    (fp_line (start -0.25 -5.05) (end 22.75 -5.05) (layer F.CrtYd) (width 0.05))
    (fp_line (start 22.75 5.05) (end -0.25 5.05) (layer F.CrtYd) (width 0.05))
    (fp_line (start 0 -4.8) (end 22.5 -4.8) (layer F.SilkS) (width 0.15))
    (fp_line (start 0 -2) (end 0 -4.8) (layer F.SilkS) (width 0.15))
    (fp_line (start 22.5 -2) (end 22.5 -4.8) (layer F.SilkS) (width 0.15))
    (fp_line (start 22.5 4.8) (end 22.5 2) (layer F.SilkS) (width 0.15))
    (fp_line (start -0.25 5.05) (end -0.25 1.95) (layer F.CrtYd) (width 0.05))
    (fp_arc (start 0 0) (end -0.25 1.95) (angle 165.3) (layer F.CrtYd) (width 0.05))
    (fp_arc (start 22.5 0) (end 22.75 -1.95) (angle 165.3) (layer F.CrtYd) (width 0.05))
    (pad "" np_thru_hole circle (at 11.25 0 90) (size 2.7 2.7) (drill 2.7) (layers *.Cu *.Mask))
    (pad 2 thru_hole circle (at 22.5 0 90) (size 3 3) (drill 1.3) (layers *.Cu *.Mask)
      (net 3 "Net-(F1-Pad2)"))
    (pad 1 thru_hole circle (at 0 0 90) (size 3 3) (drill 1.3) (layers *.Cu *.Mask)
      (net 69 /VIN))
    (model ${BBLIB_3D_NONFREE}/Schurter.3dshapes/Fuse_holder_20x5_22.5.step
      (offset (xyz 11.25 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz -90 0 0))
    )
  )

  (module Diode_SMD:D_SOD-323_HandSoldering (layer F.Cu) (tedit 58641869) (tstamp 5DF83792)
    (at 30.5235 42.6085)
    (descr SOD-323)
    (tags SOD-323)
    (path /5DF98E0F)
    (attr smd)
    (fp_text reference D1 (at 3.83 0) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value 1N5822 (at 0.1 1.9) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start -1.9 -0.85) (end 1.25 -0.85) (layer F.SilkS) (width 0.12))
    (fp_line (start -1.9 0.85) (end 1.25 0.85) (layer F.SilkS) (width 0.12))
    (fp_line (start -2 -0.95) (end -2 0.95) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 0.95) (end 2 0.95) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 -0.95) (end 2 0.95) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 -0.95) (end 2 -0.95) (layer F.CrtYd) (width 0.05))
    (fp_line (start -0.9 -0.7) (end 0.9 -0.7) (layer F.Fab) (width 0.1))
    (fp_line (start 0.9 -0.7) (end 0.9 0.7) (layer F.Fab) (width 0.1))
    (fp_line (start 0.9 0.7) (end -0.9 0.7) (layer F.Fab) (width 0.1))
    (fp_line (start -0.9 0.7) (end -0.9 -0.7) (layer F.Fab) (width 0.1))
    (fp_line (start -0.3 -0.35) (end -0.3 0.35) (layer F.Fab) (width 0.1))
    (fp_line (start -0.3 0) (end -0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -0.3 0) (end 0.2 -0.35) (layer F.Fab) (width 0.1))
    (fp_line (start 0.2 -0.35) (end 0.2 0.35) (layer F.Fab) (width 0.1))
    (fp_line (start 0.2 0.35) (end -0.3 0) (layer F.Fab) (width 0.1))
    (fp_line (start 0.2 0) (end 0.45 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.9 -0.85) (end -1.9 0.85) (layer F.SilkS) (width 0.12))
    (fp_text user %R (at 0 -1.85) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (pad 2 smd rect (at 1.25 0) (size 1 1) (layers F.Cu F.Paste F.Mask)
      (net 1 GND))
    (pad 1 smd rect (at -1.25 0) (size 1 1) (layers F.Cu F.Paste F.Mask)
      (net 41 "Net-(C3-Pad1)"))
    (model ${KISYS3DMOD}/Diode_SMD.3dshapes/D_SOD-323.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Capacitor_SMD:CP_Elec_6.3x5.9 (layer F.Cu) (tedit 5BCA39D0) (tstamp 5DF83750)
    (at 40.64 26.41 90)
    (descr "SMD capacitor, aluminum electrolytic, Panasonic C6, 6.3x5.9mm")
    (tags "capacitor electrolytic")
    (path /5DF98E15)
    (attr smd)
    (fp_text reference C4 (at -5.975 0 180) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value 68u (at 0 4.35 90) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text user %R (at 0 0 90) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start -4.8 1.05) (end -3.55 1.05) (layer F.CrtYd) (width 0.05))
    (fp_line (start -4.8 -1.05) (end -4.8 1.05) (layer F.CrtYd) (width 0.05))
    (fp_line (start -3.55 -1.05) (end -4.8 -1.05) (layer F.CrtYd) (width 0.05))
    (fp_line (start -3.55 1.05) (end -3.55 2.4) (layer F.CrtYd) (width 0.05))
    (fp_line (start -3.55 -2.4) (end -3.55 -1.05) (layer F.CrtYd) (width 0.05))
    (fp_line (start -3.55 -2.4) (end -2.4 -3.55) (layer F.CrtYd) (width 0.05))
    (fp_line (start -3.55 2.4) (end -2.4 3.55) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2.4 -3.55) (end 3.55 -3.55) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2.4 3.55) (end 3.55 3.55) (layer F.CrtYd) (width 0.05))
    (fp_line (start 3.55 1.05) (end 3.55 3.55) (layer F.CrtYd) (width 0.05))
    (fp_line (start 4.8 1.05) (end 3.55 1.05) (layer F.CrtYd) (width 0.05))
    (fp_line (start 4.8 -1.05) (end 4.8 1.05) (layer F.CrtYd) (width 0.05))
    (fp_line (start 3.55 -1.05) (end 4.8 -1.05) (layer F.CrtYd) (width 0.05))
    (fp_line (start 3.55 -3.55) (end 3.55 -1.05) (layer F.CrtYd) (width 0.05))
    (fp_line (start -4.04375 -2.24125) (end -4.04375 -1.45375) (layer F.SilkS) (width 0.12))
    (fp_line (start -4.4375 -1.8475) (end -3.65 -1.8475) (layer F.SilkS) (width 0.12))
    (fp_line (start -3.41 2.345563) (end -2.345563 3.41) (layer F.SilkS) (width 0.12))
    (fp_line (start -3.41 -2.345563) (end -2.345563 -3.41) (layer F.SilkS) (width 0.12))
    (fp_line (start -3.41 -2.345563) (end -3.41 -1.06) (layer F.SilkS) (width 0.12))
    (fp_line (start -3.41 2.345563) (end -3.41 1.06) (layer F.SilkS) (width 0.12))
    (fp_line (start -2.345563 3.41) (end 3.41 3.41) (layer F.SilkS) (width 0.12))
    (fp_line (start -2.345563 -3.41) (end 3.41 -3.41) (layer F.SilkS) (width 0.12))
    (fp_line (start 3.41 -3.41) (end 3.41 -1.06) (layer F.SilkS) (width 0.12))
    (fp_line (start 3.41 3.41) (end 3.41 1.06) (layer F.SilkS) (width 0.12))
    (fp_line (start -2.389838 -1.645) (end -2.389838 -1.015) (layer F.Fab) (width 0.1))
    (fp_line (start -2.704838 -1.33) (end -2.074838 -1.33) (layer F.Fab) (width 0.1))
    (fp_line (start -3.3 2.3) (end -2.3 3.3) (layer F.Fab) (width 0.1))
    (fp_line (start -3.3 -2.3) (end -2.3 -3.3) (layer F.Fab) (width 0.1))
    (fp_line (start -3.3 -2.3) (end -3.3 2.3) (layer F.Fab) (width 0.1))
    (fp_line (start -2.3 3.3) (end 3.3 3.3) (layer F.Fab) (width 0.1))
    (fp_line (start -2.3 -3.3) (end 3.3 -3.3) (layer F.Fab) (width 0.1))
    (fp_line (start 3.3 -3.3) (end 3.3 3.3) (layer F.Fab) (width 0.1))
    (fp_circle (center 0 0) (end 3.15 0) (layer F.Fab) (width 0.1))
    (pad 2 smd roundrect (at 2.8 0 90) (size 3.5 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.15625)
      (net 1 GND))
    (pad 1 smd roundrect (at -2.8 0 90) (size 3.5 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.15625)
      (net 2 +5V))
    (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/CP_Elec_6.3x5.9.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Capacitor_SMD:CP_Elec_8x10 (layer F.Cu) (tedit 5BCA39D0) (tstamp 5DF83706)
    (at 32.46 71.755)
    (descr "SMD capacitor, aluminum electrolytic, Nichicon, 8.0x10mm")
    (tags "capacitor electrolytic")
    (path /5DF98DFD)
    (attr smd)
    (fp_text reference C1 (at -0.075 -5.08) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value 100u (at 0 5.2) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start -5.25 1.5) (end -4.4 1.5) (layer F.CrtYd) (width 0.05))
    (fp_line (start -5.25 -1.5) (end -5.25 1.5) (layer F.CrtYd) (width 0.05))
    (fp_line (start -4.4 -1.5) (end -5.25 -1.5) (layer F.CrtYd) (width 0.05))
    (fp_line (start -4.4 1.5) (end -4.4 3.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -4.4 -3.25) (end -4.4 -1.5) (layer F.CrtYd) (width 0.05))
    (fp_line (start -4.4 -3.25) (end -3.25 -4.4) (layer F.CrtYd) (width 0.05))
    (fp_line (start -4.4 3.25) (end -3.25 4.4) (layer F.CrtYd) (width 0.05))
    (fp_line (start -3.25 -4.4) (end 4.4 -4.4) (layer F.CrtYd) (width 0.05))
    (fp_line (start -3.25 4.4) (end 4.4 4.4) (layer F.CrtYd) (width 0.05))
    (fp_line (start 4.4 1.5) (end 4.4 4.4) (layer F.CrtYd) (width 0.05))
    (fp_line (start 5.25 1.5) (end 4.4 1.5) (layer F.CrtYd) (width 0.05))
    (fp_line (start 5.25 -1.5) (end 5.25 1.5) (layer F.CrtYd) (width 0.05))
    (fp_line (start 4.4 -1.5) (end 5.25 -1.5) (layer F.CrtYd) (width 0.05))
    (fp_line (start 4.4 -4.4) (end 4.4 -1.5) (layer F.CrtYd) (width 0.05))
    (fp_line (start -5 -3.01) (end -5 -2.01) (layer F.SilkS) (width 0.12))
    (fp_line (start -5.5 -2.51) (end -4.5 -2.51) (layer F.SilkS) (width 0.12))
    (fp_line (start -4.26 3.195563) (end -3.195563 4.26) (layer F.SilkS) (width 0.12))
    (fp_line (start -4.26 -3.195563) (end -3.195563 -4.26) (layer F.SilkS) (width 0.12))
    (fp_line (start -4.26 -3.195563) (end -4.26 -1.51) (layer F.SilkS) (width 0.12))
    (fp_line (start -4.26 3.195563) (end -4.26 1.51) (layer F.SilkS) (width 0.12))
    (fp_line (start -3.195563 4.26) (end 4.26 4.26) (layer F.SilkS) (width 0.12))
    (fp_line (start -3.195563 -4.26) (end 4.26 -4.26) (layer F.SilkS) (width 0.12))
    (fp_line (start 4.26 -4.26) (end 4.26 -1.51) (layer F.SilkS) (width 0.12))
    (fp_line (start 4.26 4.26) (end 4.26 1.51) (layer F.SilkS) (width 0.12))
    (fp_line (start -3.162278 -1.9) (end -3.162278 -1.1) (layer F.Fab) (width 0.1))
    (fp_line (start -3.562278 -1.5) (end -2.762278 -1.5) (layer F.Fab) (width 0.1))
    (fp_line (start -4.15 3.15) (end -3.15 4.15) (layer F.Fab) (width 0.1))
    (fp_line (start -4.15 -3.15) (end -3.15 -4.15) (layer F.Fab) (width 0.1))
    (fp_line (start -4.15 -3.15) (end -4.15 3.15) (layer F.Fab) (width 0.1))
    (fp_line (start -3.15 4.15) (end 4.15 4.15) (layer F.Fab) (width 0.1))
    (fp_line (start -3.15 -4.15) (end 4.15 -4.15) (layer F.Fab) (width 0.1))
    (fp_line (start 4.15 -4.15) (end 4.15 4.15) (layer F.Fab) (width 0.1))
    (fp_circle (center 0 0) (end 4 0) (layer F.Fab) (width 0.1))
    (pad 2 smd roundrect (at 3.25 0) (size 3.5 2.5) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.1)
      (net 1 GND))
    (pad 1 smd roundrect (at -3.25 0) (size 3.5 2.5) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.1)
      (net 69 /VIN))
    (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/CP_Elec_8x10.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module MountingHole:MountingHole_3.2mm_M3 locked (layer F.Cu) (tedit 56D1B4CB) (tstamp 5DF85FE3)
    (at 115 73)
    (descr "Mounting Hole 3.2mm, no annular, M3")
    (tags "mounting hole 3.2mm no annular m3")
    (attr virtual)
    (fp_text reference ~ (at 0 -4.2) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value MountingHole_3.2mm_M3 (at 0 4.2) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 3.45 0) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 3.2 0) (layer Cmts.User) (width 0.15))
    (fp_text user %R (at 0.3 0) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (pad 1 np_thru_hole circle (at 0 0) (size 3.2 3.2) (drill 3.2) (layers *.Cu *.Mask))
  )

  (module MountingHole:MountingHole_3.2mm_M3 locked (layer F.Cu) (tedit 56D1B4CB) (tstamp 5DF85FD5)
    (at 115 20)
    (descr "Mounting Hole 3.2mm, no annular, M3")
    (tags "mounting hole 3.2mm no annular m3")
    (attr virtual)
    (fp_text reference ~ (at 0 -4.2) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value MountingHole_3.2mm_M3 (at 0 4.2) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text user %R (at 0.3 0) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 3.2 0) (layer Cmts.User) (width 0.15))
    (fp_circle (center 0 0) (end 3.45 0) (layer F.CrtYd) (width 0.05))
    (pad 1 np_thru_hole circle (at 0 0) (size 3.2 3.2) (drill 3.2) (layers *.Cu *.Mask))
  )

  (module MountingHole:MountingHole_3.2mm_M3 locked (layer F.Cu) (tedit 56D1B4CB) (tstamp 5DF853CA)
    (at 20 73)
    (descr "Mounting Hole 3.2mm, no annular, M3")
    (tags "mounting hole 3.2mm no annular m3")
    (attr virtual)
    (fp_text reference ~ (at 0 -4.2) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value MountingHole_3.2mm_M3 (at 0 4.2) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text user %R (at 0.3 0) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 3.2 0) (layer Cmts.User) (width 0.15))
    (fp_circle (center 0 0) (end 3.45 0) (layer F.CrtYd) (width 0.05))
    (pad 1 np_thru_hole circle (at 0 0) (size 3.2 3.2) (drill 3.2) (layers *.Cu *.Mask))
  )

  (module MountingHole:MountingHole_3.2mm_M3 locked (layer F.Cu) (tedit 56D1B4CB) (tstamp 5DF84D3D)
    (at 20 20)
    (descr "Mounting Hole 3.2mm, no annular, M3")
    (tags "mounting hole 3.2mm no annular m3")
    (attr virtual)
    (fp_text reference ~ (at 0 -4.2) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value MountingHole_3.2mm_M3 (at 0 4.2) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 3.45 0) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 3.2 0) (layer Cmts.User) (width 0.15))
    (fp_text user %R (at 0.3 0) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (pad 1 np_thru_hole circle (at 0 0) (size 3.2 3.2) (drill 3.2) (layers *.Cu *.Mask))
  )

  (dimension 105 (width 0.15) (layer Dwgs.User)
    (gr_text "105,000 mm" (at 67.5 83.3) (layer Dwgs.User)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (feature1 (pts (xy 15 78) (xy 15 82.586421)))
    (feature2 (pts (xy 120 78) (xy 120 82.586421)))
    (crossbar (pts (xy 120 82) (xy 15 82)))
    (arrow1a (pts (xy 15 82) (xy 16.126504 81.413579)))
    (arrow1b (pts (xy 15 82) (xy 16.126504 82.586421)))
    (arrow2a (pts (xy 120 82) (xy 118.873496 81.413579)))
    (arrow2b (pts (xy 120 82) (xy 118.873496 82.586421)))
  )
  (dimension 63 (width 0.15) (layer Dwgs.User) (tstamp 5DF9B182)
    (gr_text "63,000 mm" (at 125.3 46.5 270) (layer Dwgs.User) (tstamp 5DF9B182)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (feature1 (pts (xy 120 78) (xy 124.586421 78)))
    (feature2 (pts (xy 120 15) (xy 124.586421 15)))
    (crossbar (pts (xy 124 15) (xy 124 78)))
    (arrow1a (pts (xy 124 78) (xy 123.413579 76.873496)))
    (arrow1b (pts (xy 124 78) (xy 124.586421 76.873496)))
    (arrow2a (pts (xy 124 15) (xy 123.413579 16.126504)))
    (arrow2b (pts (xy 124 15) (xy 124.586421 16.126504)))
  )
  (gr_line (start 120 78) (end 120 15) (layer Edge.Cuts) (width 0.05) (tstamp 5D722B79))
  (gr_line (start 15 78) (end 15 15) (layer Edge.Cuts) (width 0.05) (tstamp 5D722B71))
  (gr_line (start 15 78) (end 120 78) (layer Edge.Cuts) (width 0.05) (tstamp 5D722B58))
  (gr_line (start 15 15) (end 120 15) (layer Edge.Cuts) (width 0.05))

  (via (at 41.8592 45.212) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 1))
  (via (at 40.64 23.622) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 1))
  (via (at 40.259 65.405) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 1))
  (via (at 40.005 61.595) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 1))
  (via (at 38.227 54.61) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 1))
  (via (at 79.883 53.721) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 1))
  (via (at 64.008 31.4325) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 1))
  (via (at 69.85 29.083) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 1))
  (via (at 108.585 42.1005) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 1))
  (via (at 108.585 29.337) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 1))
  (via (at 94.488 23.495) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 1))
  (via (at 64.77 24.13) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 1))
  (via (at 29.337 37.846) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 1))
  (via (at 31.8135 42.6085) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 1))
  (via (at 25.4 73.8505) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 1))
  (via (at 35.7505 71.6915) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 1))
  (segment (start 39.37 60.96) (end 40.005 61.595) (width 0.25) (layer F.Cu) (net 1))
  (segment (start 38.227 60.96) (end 39.37 60.96) (width 0.25) (layer F.Cu) (net 1))
  (segment (start 38.227 63.5) (end 38.227 65.405) (width 0.6) (layer F.Cu) (net 2))
  (segment (start 38.227 63.5) (end 38.227 62.23) (width 0.6) (layer F.Cu) (net 2))
  (segment (start 35.56 29.21) (end 40.64 29.21) (width 0.6) (layer F.Cu) (net 2))
  (segment (start 34.2235 30.5465) (end 35.56 29.21) (width 0.6) (layer F.Cu) (net 2))
  (segment (start 34.2235 36.576) (end 34.2235 30.5465) (width 0.6) (layer F.Cu) (net 2))
  (segment (start 40.64 34.29) (end 40.64 29.21) (width 0.6) (layer F.Cu) (net 2))
  (segment (start 45.615 71.4545) (end 46.215 70.8545) (width 0.6) (layer F.Cu) (net 2))
  (segment (start 41.5925 73.025) (end 44.0445 73.025) (width 0.6) (layer F.Cu) (net 2))
  (segment (start 38.227 65.405) (end 38.227 69.6595) (width 0.6) (layer F.Cu) (net 2))
  (segment (start 44.0445 73.025) (end 45.615 71.4545) (width 0.6) (layer F.Cu) (net 2))
  (segment (start 38.227 69.6595) (end 41.5925 73.025) (width 0.6) (layer F.Cu) (net 2))
  (segment (start 53.0445 73.025) (end 55.215 70.8545) (width 0.6) (layer F.Cu) (net 2))
  (segment (start 44.0445 73.025) (end 53.0445 73.025) (width 0.6) (layer F.Cu) (net 2))
  (segment (start 62.0445 73.025) (end 64.215 70.8545) (width 0.6) (layer F.Cu) (net 2))
  (segment (start 53.0445 73.025) (end 62.0445 73.025) (width 0.6) (layer F.Cu) (net 2))
  (segment (start 71.0445 73.025) (end 73.215 70.8545) (width 0.6) (layer F.Cu) (net 2))
  (segment (start 62.0445 73.025) (end 71.0445 73.025) (width 0.6) (layer F.Cu) (net 2))
  (segment (start 80.0445 73.025) (end 82.215 70.8545) (width 0.6) (layer F.Cu) (net 2))
  (segment (start 71.0445 73.025) (end 80.0445 73.025) (width 0.6) (layer F.Cu) (net 2))
  (segment (start 89.0445 73.025) (end 91.215 70.8545) (width 0.6) (layer F.Cu) (net 2))
  (segment (start 80.0445 73.025) (end 89.0445 73.025) (width 0.6) (layer F.Cu) (net 2))
  (segment (start 98.0445 73.025) (end 100.215 70.8545) (width 0.6) (layer F.Cu) (net 2))
  (segment (start 89.0445 73.025) (end 98.0445 73.025) (width 0.6) (layer F.Cu) (net 2))
  (segment (start 107.0445 73.025) (end 109.215 70.8545) (width 0.6) (layer F.Cu) (net 2))
  (segment (start 98.0445 73.025) (end 107.0445 73.025) (width 0.6) (layer F.Cu) (net 2))
  (segment (start 66.04 31.4325) (end 66.04 29.08) (width 0.6) (layer F.Cu) (net 71))
  (segment (start 106.595 26.035) (end 107.17 26.035) (width 0.6) (layer F.Cu) (net 2))
  (segment (start 102.867208 26.035) (end 106.595 26.035) (width 0.6) (layer F.Cu) (net 2))
  (segment (start 99.06 22.227792) (end 102.867208 26.035) (width 0.6) (layer F.Cu) (net 2))
  (segment (start 99.06 20.955) (end 99.06 22.227792) (width 0.6) (layer F.Cu) (net 2))
  (segment (start 94.851 16.746) (end 99.06 20.955) (width 0.6) (layer F.Cu) (net 2))
  (segment (start 66.04 16.746) (end 94.851 16.746) (width 0.6) (layer F.Cu) (net 2))
  (segment (start 53.104 16.746) (end 40.64 29.21) (width 0.6) (layer F.Cu) (net 2))
  (segment (start 66.04 16.746) (end 53.104 16.746) (width 0.6) (layer F.Cu) (net 2))
  (segment (start 92.912098 29.08) (end 73.96 29.08) (width 0.6) (layer F.Cu) (net 2))
  (segment (start 99.06 22.932098) (end 92.912098 29.08) (width 0.6) (layer F.Cu) (net 2))
  (segment (start 73.96 29.08) (end 73.66 29.08) (width 0.6) (layer F.Cu) (net 2))
  (segment (start 99.06 20.955) (end 99.06 22.932098) (width 0.6) (layer F.Cu) (net 2))
  (segment (start 52.07 29.21) (end 56.515 33.655) (width 0.6) (layer F.Cu) (net 2))
  (segment (start 40.64 29.21) (end 52.07 29.21) (width 0.6) (layer F.Cu) (net 2))
  (segment (start 40.64 34.997106) (end 40.64 34.29) (width 0.6) (layer F.Cu) (net 2))
  (segment (start 36.7665 62.23) (end 35.72399 61.18749) (width 0.6) (layer F.Cu) (net 2))
  (segment (start 38.227 62.23) (end 36.7665 62.23) (width 0.6) (layer F.Cu) (net 2))
  (segment (start 35.72399 61.18749) (end 35.72399 43.71451) (width 0.6) (layer F.Cu) (net 2))
  (segment (start 40.64 38.7985) (end 40.64 34.997106) (width 0.6) (layer F.Cu) (net 2))
  (segment (start 35.72399 43.71451) (end 40.64 38.7985) (width 0.6) (layer F.Cu) (net 2))
  (segment (start 24.34632 44.81) (end 22.225 44.81) (width 0.6) (layer F.Cu) (net 3))
  (segment (start 26.035 43.12132) (end 24.34632 44.81) (width 0.6) (layer F.Cu) (net 3))
  (segment (start 26.035 33.722919) (end 26.035 43.12132) (width 0.6) (layer F.Cu) (net 3))
  (segment (start 22.225 31.115) (end 23.427081 31.115) (width 0.6) (layer F.Cu) (net 3))
  (segment (start 23.427081 31.115) (end 26.035 33.722919) (width 0.6) (layer F.Cu) (net 3))
  (segment (start 116.6495 39.0525) (end 111.5695 39.0525) (width 0.3) (layer F.Cu) (net 4))
  (segment (start 112.983713 51.7525) (end 116.6495 51.7525) (width 0.3) (layer F.Cu) (net 4))
  (segment (start 111.5695 51.7525) (end 112.983713 51.7525) (width 0.3) (layer F.Cu) (net 4))
  (segment (start 117.649499 38.052501) (end 116.6495 39.0525) (width 0.3) (layer F.Cu) (net 4))
  (segment (start 118.745 36.957) (end 117.649499 38.052501) (width 0.3) (layer F.Cu) (net 4))
  (segment (start 102.235 32.59434) (end 106.47185 28.35749) (width 0.3) (layer F.Cu) (net 4))
  (segment (start 106.47185 28.35749) (end 115.720492 28.35749) (width 0.3) (layer F.Cu) (net 4))
  (segment (start 115.720492 28.35749) (end 118.745 31.381998) (width 0.3) (layer F.Cu) (net 4))
  (segment (start 102.235 33.655) (end 102.235 32.59434) (width 0.3) (layer F.Cu) (net 4))
  (segment (start 118.745 31.381998) (end 118.745 36.957) (width 0.3) (layer F.Cu) (net 4))
  (segment (start 118.745 49.657) (end 116.6495 51.7525) (width 0.3) (layer F.Cu) (net 4))
  (segment (start 118.745 36.957) (end 118.745 49.657) (width 0.3) (layer F.Cu) (net 4))
  (segment (start 116.6495 51.7525) (end 116.6495 54.61) (width 0.3) (layer F.Cu) (net 4))
  (segment (start 109.795 26.035) (end 112.776 26.035) (width 0.25) (layer F.Cu) (net 7))
  (segment (start 109.22 26.035) (end 109.795 26.035) (width 0.25) (layer F.Cu) (net 7))
  (segment (start 81.915 53.721) (end 81.915 55.88) (width 0.25) (layer F.Cu) (net 8))
  (segment (start 81.915 55.88) (end 81.915 59.055) (width 0.25) (layer F.Cu) (net 8))
  (segment (start 40.438478 57.183522) (end 39.202 58.42) (width 0.25) (layer F.Cu) (net 9))
  (segment (start 39.202 58.42) (end 38.227 58.42) (width 0.25) (layer F.Cu) (net 9))
  (segment (start 40.438478 53.69745) (end 40.438478 57.183522) (width 0.25) (layer F.Cu) (net 9))
  (segment (start 45.96157 52.566978) (end 41.56895 52.566978) (width 0.25) (layer F.Cu) (net 9))
  (segment (start 54.868103 61.473511) (end 45.96157 52.566978) (width 0.25) (layer F.Cu) (net 9))
  (segment (start 80.44 55.88) (end 80.450001 55.890001) (width 0.25) (layer F.Cu) (net 9))
  (segment (start 80.450001 55.890001) (end 80.450001 59.571001) (width 0.25) (layer F.Cu) (net 9))
  (segment (start 80.450001 59.571001) (end 78.547491 61.473511) (width 0.25) (layer F.Cu) (net 9))
  (segment (start 41.56895 52.566978) (end 40.438478 53.69745) (width 0.25) (layer F.Cu) (net 9))
  (segment (start 79.865 55.88) (end 80.44 55.88) (width 0.25) (layer F.Cu) (net 9))
  (segment (start 78.547491 61.473511) (end 54.868103 61.473511) (width 0.25) (layer F.Cu) (net 9))
  (segment (start 108.585 44.1325) (end 111.5695 44.1325) (width 0.25) (layer F.Cu) (net 10))
  (segment (start 116.6495 44.1325) (end 111.5695 44.1325) (width 0.25) (layer F.Cu) (net 10))
  (segment (start 97.155 57.99434) (end 97.155 59.055) (width 0.25) (layer F.Cu) (net 10))
  (segment (start 97.155 54.8625) (end 97.155 57.99434) (width 0.25) (layer F.Cu) (net 10))
  (segment (start 107.885 44.1325) (end 97.155 54.8625) (width 0.25) (layer F.Cu) (net 10))
  (segment (start 108.585 44.1325) (end 107.885 44.1325) (width 0.25) (layer F.Cu) (net 10))
  (segment (start 109.285 31.4325) (end 111.5695 31.4325) (width 0.25) (layer F.Cu) (net 11))
  (segment (start 108.585 31.4325) (end 109.285 31.4325) (width 0.25) (layer F.Cu) (net 11))
  (segment (start 116.6495 31.4325) (end 111.5695 31.4325) (width 0.25) (layer F.Cu) (net 11))
  (segment (start 107.885 31.4325) (end 108.585 31.4325) (width 0.25) (layer F.Cu) (net 11))
  (segment (start 95.885 43.4325) (end 107.885 31.4325) (width 0.25) (layer F.Cu) (net 11))
  (segment (start 99.695 59.055) (end 98.619999 60.130001) (width 0.25) (layer F.Cu) (net 11))
  (segment (start 96.249001 60.130001) (end 95.885 59.766) (width 0.25) (layer F.Cu) (net 11))
  (segment (start 98.619999 60.130001) (end 96.249001 60.130001) (width 0.25) (layer F.Cu) (net 11))
  (segment (start 95.885 59.766) (end 95.885 43.4325) (width 0.25) (layer F.Cu) (net 11))
  (segment (start 66.04 18.796) (end 66.04 20.955) (width 0.25) (layer F.Cu) (net 12))
  (segment (start 96.52 22.227792) (end 96.52 23.495) (width 0.25) (layer F.Cu) (net 13))
  (segment (start 96.52 20.955) (end 96.52 22.227792) (width 0.25) (layer F.Cu) (net 13))
  (segment (start 45.365 67.7545) (end 48.8315 67.7545) (width 0.25) (layer F.Cu) (net 14))
  (segment (start 44.315 67.7545) (end 45.365 67.7545) (width 0.25) (layer F.Cu) (net 14))
  (segment (start 43.177 66.6165) (end 43.177 63.5) (width 0.25) (layer F.Cu) (net 14))
  (segment (start 44.315 67.7545) (end 43.177 66.6165) (width 0.25) (layer F.Cu) (net 14))
  (segment (start 53.315 67.7545) (end 57.785 67.7545) (width 0.25) (layer F.Cu) (net 15))
  (segment (start 51.664 66.1035) (end 52.715 67.1545) (width 0.25) (layer F.Cu) (net 15))
  (segment (start 48.4505 66.1035) (end 51.664 66.1035) (width 0.25) (layer F.Cu) (net 15))
  (segment (start 52.715 67.1545) (end 53.315 67.7545) (width 0.25) (layer F.Cu) (net 15))
  (segment (start 43.177 62.23) (end 44.577 62.23) (width 0.25) (layer F.Cu) (net 15))
  (segment (start 44.577 62.23) (end 48.4505 66.1035) (width 0.25) (layer F.Cu) (net 15))
  (segment (start 47.675808 60.96) (end 52.5514 65.835599) (width 0.25) (layer F.Cu) (net 16))
  (segment (start 43.177 60.96) (end 47.675808 60.96) (width 0.25) (layer F.Cu) (net 16))
  (segment (start 52.5514 65.835599) (end 60.396099 65.835599) (width 0.25) (layer F.Cu) (net 16))
  (segment (start 61.715 67.1545) (end 62.315 67.7545) (width 0.25) (layer F.Cu) (net 16))
  (segment (start 60.396099 65.835599) (end 61.715 67.1545) (width 0.25) (layer F.Cu) (net 16))
  (segment (start 71.315 67.7545) (end 75.819 67.7545) (width 0.25) (layer F.Cu) (net 17))
  (segment (start 70.715 67.1545) (end 71.315 67.7545) (width 0.25) (layer F.Cu) (net 17))
  (segment (start 47.04222 59.69) (end 52.7378 65.385588) (width 0.25) (layer F.Cu) (net 17))
  (segment (start 68.946088 65.385588) (end 70.715 67.1545) (width 0.25) (layer F.Cu) (net 17))
  (segment (start 52.7378 65.385588) (end 68.946088 65.385588) (width 0.25) (layer F.Cu) (net 17))
  (segment (start 43.177 59.69) (end 47.04222 59.69) (width 0.25) (layer F.Cu) (net 17))
  (segment (start 80.315 67.7545) (end 84.836 67.7545) (width 0.25) (layer F.Cu) (net 18))
  (segment (start 46.408623 58.42) (end 44.152 58.42) (width 0.25) (layer F.Cu) (net 18))
  (segment (start 80.315 67.7545) (end 77.496077 64.935577) (width 0.25) (layer F.Cu) (net 18))
  (segment (start 52.9242 64.935577) (end 46.408623 58.42) (width 0.25) (layer F.Cu) (net 18))
  (segment (start 77.496077 64.935577) (end 52.9242 64.935577) (width 0.25) (layer F.Cu) (net 18))
  (segment (start 44.152 58.42) (end 43.177 58.42) (width 0.25) (layer F.Cu) (net 18))
  (segment (start 89.315 67.7545) (end 93.853 67.7545) (width 0.25) (layer F.Cu) (net 19))
  (segment (start 43.177 57.15) (end 45.775035 57.15) (width 0.25) (layer F.Cu) (net 19))
  (segment (start 45.775035 57.15) (end 53.110601 64.485566) (width 0.25) (layer F.Cu) (net 19))
  (segment (start 53.110601 64.485566) (end 86.046066 64.485566) (width 0.25) (layer F.Cu) (net 19))
  (segment (start 88.715 67.1545) (end 89.315 67.7545) (width 0.25) (layer F.Cu) (net 19))
  (segment (start 86.046066 64.485566) (end 88.715 67.1545) (width 0.25) (layer F.Cu) (net 19))
  (segment (start 99.365 67.7545) (end 102.8065 67.7545) (width 0.25) (layer F.Cu) (net 20))
  (segment (start 98.315 67.7545) (end 99.365 67.7545) (width 0.25) (layer F.Cu) (net 20))
  (segment (start 94.596055 64.035555) (end 97.715 67.1545) (width 0.25) (layer F.Cu) (net 20))
  (segment (start 53.297001 64.035555) (end 94.596055 64.035555) (width 0.25) (layer F.Cu) (net 20))
  (segment (start 45.141447 55.88) (end 53.297001 64.035555) (width 0.25) (layer F.Cu) (net 20))
  (segment (start 43.177 55.88) (end 45.141447 55.88) (width 0.25) (layer F.Cu) (net 20))
  (segment (start 97.715 67.1545) (end 98.315 67.7545) (width 0.25) (layer F.Cu) (net 20))
  (segment (start 107.315 67.7545) (end 111.8235 67.7545) (width 0.25) (layer F.Cu) (net 21))
  (segment (start 106.715 67.1545) (end 107.315 67.7545) (width 0.25) (layer F.Cu) (net 21))
  (segment (start 103.146044 63.585544) (end 106.715 67.1545) (width 0.25) (layer F.Cu) (net 21))
  (segment (start 53.483401 63.585544) (end 103.146044 63.585544) (width 0.25) (layer F.Cu) (net 21))
  (segment (start 44.507857 54.61) (end 53.483401 63.585544) (width 0.25) (layer F.Cu) (net 21))
  (segment (start 43.177 54.61) (end 44.507857 54.61) (width 0.25) (layer F.Cu) (net 21))
  (segment (start 39.988467 53.51105) (end 39.988467 56.363533) (width 0.25) (layer F.Cu) (net 22))
  (segment (start 77.5335 60.8965) (end 54.927502 60.8965) (width 0.25) (layer F.Cu) (net 22))
  (segment (start 39.202 57.15) (end 38.227 57.15) (width 0.25) (layer F.Cu) (net 22))
  (segment (start 54.927502 60.8965) (end 46.14797 52.116967) (width 0.25) (layer F.Cu) (net 22))
  (segment (start 79.375 59.055) (end 77.5335 60.8965) (width 0.25) (layer F.Cu) (net 22))
  (segment (start 39.988467 56.363533) (end 39.202 57.15) (width 0.25) (layer F.Cu) (net 22))
  (segment (start 46.14797 52.116967) (end 41.38255 52.116967) (width 0.25) (layer F.Cu) (net 22))
  (segment (start 41.38255 52.116967) (end 39.988467 53.51105) (width 0.25) (layer F.Cu) (net 22))
  (segment (start 78.105 57.785) (end 79.375 59.055) (width 0.25) (layer F.Cu) (net 22))
  (segment (start 78.105 39.37) (end 78.105 57.785) (width 0.25) (layer F.Cu) (net 22))
  (segment (start 71.12 30.4165) (end 72.4535 31.75) (width 0.25) (layer F.Cu) (net 22))
  (segment (start 79.756 31.75) (end 80.645 32.639) (width 0.25) (layer F.Cu) (net 22))
  (segment (start 71.12 29.08) (end 71.12 30.4165) (width 0.25) (layer F.Cu) (net 22))
  (segment (start 72.4535 31.75) (end 79.756 31.75) (width 0.25) (layer F.Cu) (net 22))
  (segment (start 80.645 36.83) (end 78.105 39.37) (width 0.25) (layer F.Cu) (net 22))
  (segment (start 80.645 32.639) (end 80.645 36.83) (width 0.25) (layer F.Cu) (net 22))
  (segment (start 88.785001 59.804999) (end 89.535 59.055) (width 0.25) (layer F.Cu) (net 23))
  (segment (start 86.216467 62.373533) (end 88.785001 59.804999) (width 0.25) (layer F.Cu) (net 23))
  (segment (start 37.205242 60.31501) (end 40.52299 60.31501) (width 0.25) (layer F.Cu) (net 23))
  (segment (start 37.252 55.88) (end 36.449 56.683) (width 0.25) (layer F.Cu) (net 23))
  (segment (start 54.495302 62.373533) (end 86.216467 62.373533) (width 0.25) (layer F.Cu) (net 23))
  (segment (start 36.449 59.558768) (end 37.205242 60.31501) (width 0.25) (layer F.Cu) (net 23))
  (segment (start 36.449 56.683) (end 36.449 59.558768) (width 0.25) (layer F.Cu) (net 23))
  (segment (start 40.52299 60.31501) (end 41.3385 59.4995) (width 0.25) (layer F.Cu) (net 23))
  (segment (start 38.227 55.88) (end 37.252 55.88) (width 0.25) (layer F.Cu) (net 23))
  (segment (start 45.58877 53.467) (end 54.495302 62.373533) (width 0.25) (layer F.Cu) (net 23))
  (segment (start 41.3385 59.4995) (end 41.3385 54.07025) (width 0.25) (layer F.Cu) (net 23))
  (segment (start 41.3385 54.07025) (end 41.94175 53.467) (width 0.25) (layer F.Cu) (net 23))
  (segment (start 41.94175 53.467) (end 45.58877 53.467) (width 0.25) (layer F.Cu) (net 23))
  (segment (start 84.455 36.3855) (end 84.455 59.055) (width 0.25) (layer F.Cu) (net 24))
  (segment (start 81.356 31.115) (end 83.185 32.944) (width 0.25) (layer F.Cu) (net 24))
  (segment (start 72.778232 31.115) (end 81.356 31.115) (width 0.25) (layer F.Cu) (net 24))
  (segment (start 71.76499 30.101758) (end 72.778232 31.115) (width 0.25) (layer F.Cu) (net 24))
  (segment (start 67.8815 27.2415) (end 70.928268 27.2415) (width 0.25) (layer F.Cu) (net 24))
  (segment (start 70.928268 27.2415) (end 71.76499 28.078222) (width 0.25) (layer F.Cu) (net 24))
  (segment (start 83.185 35.1155) (end 84.455 36.3855) (width 0.25) (layer F.Cu) (net 24))
  (segment (start 83.185 32.944) (end 83.185 35.1155) (width 0.25) (layer F.Cu) (net 24))
  (segment (start 67.31 27.813) (end 67.8815 27.2415) (width 0.25) (layer F.Cu) (net 24))
  (segment (start 67.31 29.08) (end 67.31 27.813) (width 0.25) (layer F.Cu) (net 24))
  (segment (start 71.76499 28.078222) (end 71.76499 30.101758) (width 0.25) (layer F.Cu) (net 24))
  (segment (start 41.75535 53.016989) (end 45.77517 53.016989) (width 0.25) (layer F.Cu) (net 24))
  (segment (start 45.77517 53.016989) (end 54.681702 61.923522) (width 0.25) (layer F.Cu) (net 24))
  (segment (start 81.586478 61.923522) (end 83.705001 59.804999) (width 0.25) (layer F.Cu) (net 24))
  (segment (start 83.705001 59.804999) (end 84.455 59.055) (width 0.25) (layer F.Cu) (net 24))
  (segment (start 38.227 59.69) (end 39.624 59.69) (width 0.25) (layer F.Cu) (net 24))
  (segment (start 54.681702 61.923522) (end 81.586478 61.923522) (width 0.25) (layer F.Cu) (net 24))
  (segment (start 39.624 59.69) (end 40.888489 58.425511) (width 0.25) (layer F.Cu) (net 24))
  (segment (start 40.888489 58.425511) (end 40.888489 53.88385) (width 0.25) (layer F.Cu) (net 24))
  (segment (start 40.888489 53.88385) (end 41.75535 53.016989) (width 0.25) (layer F.Cu) (net 24))
  (segment (start 68.58 31.6865) (end 68.58 29.08) (width 0.25) (layer F.Cu) (net 25))
  (segment (start 67.945 32.3215) (end 68.58 31.6865) (width 0.25) (layer F.Cu) (net 25))
  (segment (start 71.755 59.055) (end 67.945 55.245) (width 0.25) (layer F.Cu) (net 25))
  (segment (start 67.945 55.245) (end 67.945 32.3215) (width 0.25) (layer F.Cu) (net 25))
  (segment (start 72.39 27.178) (end 72.39 29.08) (width 0.25) (layer F.Cu) (net 27))
  (segment (start 73.7235 25.8445) (end 72.39 27.178) (width 0.25) (layer F.Cu) (net 27))
  (segment (start 93.98 20.955) (end 89.0905 25.8445) (width 0.25) (layer F.Cu) (net 27))
  (segment (start 89.0905 25.8445) (end 73.7235 25.8445) (width 0.25) (layer F.Cu) (net 27))
  (segment (start 68.58 20.955) (end 68.58 24.13) (width 0.25) (layer F.Cu) (net 30))
  (segment (start 69.85 22.225) (end 71.12 20.955) (width 0.25) (layer F.Cu) (net 31))
  (segment (start 69.85 24.13) (end 69.85 22.225) (width 0.25) (layer F.Cu) (net 31))
  (segment (start 72.7075 21.9075) (end 73.66 20.955) (width 0.25) (layer F.Cu) (net 32))
  (segment (start 72.1995 21.9075) (end 72.7075 21.9075) (width 0.25) (layer F.Cu) (net 32))
  (segment (start 71.12 24.13) (end 71.12 22.987) (width 0.25) (layer F.Cu) (net 32))
  (segment (start 71.12 22.987) (end 72.1995 21.9075) (width 0.25) (layer F.Cu) (net 32))
  (segment (start 75.300001 21.854999) (end 76.2 20.955) (width 0.25) (layer F.Cu) (net 33))
  (segment (start 74.6125 22.5425) (end 75.300001 21.854999) (width 0.25) (layer F.Cu) (net 33))
  (segment (start 73.025 22.5425) (end 74.6125 22.5425) (width 0.25) (layer F.Cu) (net 33))
  (segment (start 72.39 24.13) (end 72.39 23.1775) (width 0.25) (layer F.Cu) (net 33))
  (segment (start 72.39 23.1775) (end 73.025 22.5425) (width 0.25) (layer F.Cu) (net 33))
  (segment (start 85.725 24.13) (end 88.9 20.955) (width 0.25) (layer F.Cu) (net 35))
  (segment (start 73.66 24.13) (end 85.725 24.13) (width 0.25) (layer F.Cu) (net 35))
  (segment (start 33.2485 40.386) (end 34.2235 40.386) (width 0.3) (layer F.Cu) (net 40))
  (segment (start 32.53 39.6675) (end 33.2485 40.386) (width 0.3) (layer F.Cu) (net 40))
  (segment (start 32.53 34.29) (end 32.53 39.6675) (width 0.3) (layer F.Cu) (net 40))
  (segment (start 30.48 34.99) (end 30.48 34.29) (width 0.3) (layer F.Cu) (net 41))
  (segment (start 31.115 35.625) (end 30.48 34.99) (width 0.3) (layer F.Cu) (net 41))
  (segment (start 31.115 39.5195) (end 31.115 35.625) (width 0.3) (layer F.Cu) (net 41))
  (segment (start 29.2735 40.386) (end 30.2485 40.386) (width 0.3) (layer F.Cu) (net 41))
  (segment (start 30.2485 40.386) (end 31.115 39.5195) (width 0.3) (layer F.Cu) (net 41))
  (segment (start 29.2735 40.386) (end 29.2735 42.6085) (width 0.3) (layer F.Cu) (net 41))
  (segment (start 30.48 30.43) (end 29.26 29.21) (width 0.3) (layer F.Cu) (net 41))
  (segment (start 30.48 34.29) (end 30.48 30.43) (width 0.3) (layer F.Cu) (net 41))
  (segment (start 114.5995 57.5765) (end 115.316 58.293) (width 0.25) (layer F.Cu) (net 42))
  (segment (start 114.5995 54.61) (end 114.5995 57.5765) (width 0.25) (layer F.Cu) (net 42))
  (segment (start 109.75625 57.5945) (end 68.1355 57.5945) (width 0.25) (layer B.Cu) (net 43))
  (segment (start 67.424999 58.305001) (end 66.675 59.055) (width 0.25) (layer B.Cu) (net 43))
  (segment (start 68.1355 57.5945) (end 67.424999 58.305001) (width 0.25) (layer B.Cu) (net 43))
  (segment (start 112.776 58.293) (end 110.45475 58.293) (width 0.25) (layer B.Cu) (net 43))
  (segment (start 110.45475 58.293) (end 109.75625 57.5945) (width 0.25) (layer B.Cu) (net 43))
  (segment (start 22.225 68.58) (end 25.4 71.755) (width 0.6) (layer F.Cu) (net 69))
  (segment (start 22.225 67.31) (end 22.225 68.58) (width 0.6) (layer F.Cu) (net 69))
  (segment (start 29.21 71.755) (end 25.4 71.755) (width 0.6) (layer F.Cu) (net 69))
  (segment (start 23.724999 65.810001) (end 22.225 67.31) (width 0.6) (layer F.Cu) (net 69))
  (segment (start 26.93501 39.86699) (end 26.93501 62.59999) (width 0.6) (layer F.Cu) (net 69))
  (segment (start 29.2735 39.116) (end 27.686 39.116) (width 0.6) (layer F.Cu) (net 69))
  (segment (start 26.93501 62.59999) (end 23.724999 65.810001) (width 0.6) (layer F.Cu) (net 69))
  (segment (start 27.686 39.116) (end 26.93501 39.86699) (width 0.6) (layer F.Cu) (net 69))
  (segment (start 19.812 33.904081) (end 19.812 26.2255) (width 0.6) (layer F.Cu) (net 70))
  (segment (start 19.812 26.2255) (end 19.05 25.4635) (width 0.6) (layer F.Cu) (net 70))
  (segment (start 22.225 35.115) (end 21.022919 35.115) (width 0.6) (layer F.Cu) (net 70))
  (segment (start 21.022919 35.115) (end 19.812 33.904081) (width 0.6) (layer F.Cu) (net 70))

  (zone (net 1) (net_name GND) (layer B.Cu) (tstamp 0) (hatch edge 0.508)
    (connect_pads (clearance 0.508))
    (min_thickness 0.254)
    (fill (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508))
    (polygon
      (pts
        (xy 119.5 77.5) (xy 15.5 77.5) (xy 15.5 15.5) (xy 119.5 15.5)
      )
    )
  )
  (zone (net 2) (net_name +5V) (layer F.Cu) (tstamp 0) (hatch edge 0.508)
    (connect_pads (clearance 0.508))
    (min_thickness 0.254)
    (fill (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508))
    (polygon
      (pts
        (xy 119.5 77.5) (xy 15.5 77.5) (xy 15.5 15.5) (xy 119.5 15.5)
      )
    )
  )
)