{
    "id": "Mark2_for_Ultimaker2",
    "version": 2,
    "name": "Mark2 for Ultimaker2",
    "inherits": "ultimaker2_plus",
    "metadata": {
        "visible": true,
        "author": "TheUltimakerCommunity",
        "manufacturer": "Foehnsturm",
        "category": "Other",
        "quality_definition": "ultimaker2_plus",
        "weight": 1,
        "file_formats": "text/x-gcode",
        "icon": "icon_ultimaker.png",
        "platform": "ultimaker2_platform.obj",
        "platform_texture": "Mark2_for_Ultimaker2_backplate.png",
        "machine_extruder_trains":
        {
            "0": "Mark2_extruder1",
            "1": "Mark2_extruder2"
        },
        "supported_actions": ["MachineSettingsAction", "UpgradeFirmware"]
    },
    "overrides": {
        "machine_name": { "default_value": "Mark2_for_Ultimaker2" },
        "machine_width": {
            "default_value": 223
        },
        "machine_depth": {
            "default_value": 223
        },
        "machine_height": {
            "default_value": 203
        },
        "gantry_height": {
            "default_value": 52
        },
        "machine_center_is_zero": {
            "default_value": false
        },
        "machine_nozzle_size": {
            "default_value": 0.4
        },
        "machine_nozzle_heat_up_speed": {
            "default_value": 3.5
        },
        "machine_nozzle_cool_down_speed": {
            "default_value": 1.5
        },
        "machine_min_cool_heat_time_window":
        {
            "default_value": 15.0
        },
        "machine_show_variants": {
            "default_value": true
        },
        "machine_nozzle_head_distance": {
            "default_value": 5
        },
        "machine_nozzle_expansion_angle": {
            "default_value": 45
        },
        "machine_heat_zone_length": {
            "default_value": 20
        },
        "machine_heated_bed": {
            "default_value": true
        },
        "speed_infill": {
            "value": "speed_print"
        },
        "speed_wall_x": {
            "value": "speed_wall"
        },
        "layer_height_0": {
            "value": "round(machine_nozzle_size / 1.5, 2)"
        },
        "line_width": {
            "value": "round(machine_nozzle_size * 0.875, 2)"
        },
        "speed_layer_0": {
            "default_value": 20
        },
        "speed_support": {
            "value": "speed_wall_0"
        },
        "machine_max_feedrate_x": {
            "default_value": 250
        },
        "machine_max_feedrate_y": {
            "default_value": 250
        },
        "machine_max_feedrate_z": {
            "default_value": 40
        },
        "machine_max_feedrate_e": {
            "default_value": 45
        },
        "machine_acceleration": {
            "default_value": 3000
        },
        "retraction_amount": {
            "default_value": 5.1
        },
        "retraction_speed": {
            "default_value": 25
        },
        "switch_extruder_retraction_amount": {
            "default_value": 0,
            "value": "retraction_amount",
            "enabled": false
        },
        "switch_extruder_retraction_speeds": {
            "default_value": 25,
            "value": "retraction_speed",
            "enabled": false
        },
        "switch_extruder_retraction_speed": {
            "default_value": 25,
            "value": "retraction_retract_speed",
            "enabled": false
        },
        "switch_extruder_prime_speed": {
            "default_value": 25,
            "value": "retraction_prime_speed",
            "enabled": false
        },
        "machine_head_with_fans_polygon":
        {
            "default_value": [
                [ -44, 14 ],
                [ -44, -34 ],
                [ 64, 14 ],
                [ 64, -34 ]
            ]
        },
        "machine_use_extruder_offset_to_offset_coords": {
            "default_value": false
        },
        "machine_gcode_flavor": {
            "default_value": "RepRap (Marlin/Sprinter)"
        },
        "machine_start_gcode" : {
            "default_value": "",
            "value": "\"\"  if machine_gcode_flavor == \"UltiGCode\" else \"G21 ;metric values\\nG90 ;absolute positioning\\nM82 ;set extruder to absolute mode\\nM107 ;start with the fan off\\nM200 D0 T0 ;reset filament diameter\\nM200 D0 T1\\nG28 Z0; home all\\nG28 X0 Y0\\nG0 Z20 F2400 ;move the platform to 20mm\\nG92 E0\\nT1 ; move to the 2th head\\nG0 Z20 F2400\\nG92 E-7.0 ;prime distance\\nG1 E0 F45 ;purge nozzle\\nG1 E-5.1 F1500 ; retract\\nG1 X90 Z0.01 F5000 ; move away from the prime poop\\nG1 X50 F9000\\nG0 Z20 F2400\\nT0 ; move to the first head\\nG0 Z20 F2400\\nG92 E-7.0\\nG1 E0 F45 ;purge nozzle\\nG1 E-5.1 F1500\\nG1 X60 Z0.01 F5000 ; move away from the prime poop\\nG1 X20 F9000\\nM400 ;finish all moves\\nG92 E0\\n;end of startup sequence\\n\""
        },
        "machine_end_gcode" : {
            "default_value": "",
            "value": "\"\"  if machine_gcode_flavor == \"UltiGCode\" else \"G90 ;absolute positioning\\nM104 S0 T0 ;extruder heater off\\nM104 S0 T1\\nM140 S0 ;turn off bed\\nT0 ; move to the first head\\nM107 ;fan off\""
        },
        "machine_extruder_count": {
            "default_value": 2
        },
        "acceleration_enabled":
        {
            "default_value": true
        },
        "acceleration_print":
        {
            "default_value": 2000,
            "value": "2000"
        },
        "acceleration_travel":
        {
            "default_value": 3000,
            "value": "acceleration_print if magic_spiralize else 3000"
        },
        "acceleration_layer_0": { "value": "acceleration_topbottom" },
        "acceleration_prime_tower": { "value": "math.ceil(acceleration_print * 2000 / 4000)" },
        "acceleration_support": { "value": "math.ceil(acceleration_print * 2000 / 4000)" },
        "acceleration_support_interface": { "value": "acceleration_topbottom" },
        "acceleration_topbottom": { "value": "math.ceil(acceleration_print * 500 / 4000)" },
        "acceleration_wall": { "value": "math.ceil(acceleration_print * 1000 / 4000)" },
        "acceleration_wall_0": { "value": "math.ceil(acceleration_wall * 500 / 1000)" },
        "jerk_enabled":
        {
            "default_value": true
        },
        "jerk_print":
        {
            "default_value": 12
        },
        "jerk_travel":
        {
            "default_value": 20,
            "value": "jerk_print if magic_spiralize else 20"
        },
        "jerk_layer_0": { "value": "jerk_topbottom" },
        "jerk_prime_tower": { "value": "math.ceil(jerk_print * 15 / 25)" },
        "jerk_support": { "value": "math.ceil(jerk_print * 15 / 25)" },
        "jerk_support_interface": { "value": "jerk_topbottom" },
        "jerk_topbottom": { "value": "math.ceil(jerk_print * 10 / 25)" },
        "jerk_wall": { "value": "math.ceil(jerk_print * 15 / 25)" },
        "jerk_wall_0": { "value": "math.ceil(jerk_wall * 6 / 10)" },
        "jerk_travel_layer_0": { "value": "math.ceil(jerk_layer_0 * jerk_travel / jerk_print)" },
        "extruder_prime_pos_abs": { "default_value": false },
        "machine_extruder_start_pos_abs": { "default_value": false },
        "machine_extruder_start_pos_x": { "value": 0.0 },
        "machine_extruder_start_pos_y": { "value": 0.0 },
        "machine_extruder_end_pos_abs": { "default_value": false },
        "machine_extruder_end_pos_x": { "value": 0.0 },
        "machine_extruder_end_pos_y": { "value": 0.0 },
        "extruder_prime_pos_x": { "default_value": 0.0, "enabled": false },
        "extruder_prime_pos_y": { "default_value": 0.0, "enabled": false },
        "extruder_prime_pos_z": { "default_value": 0.0, "enabled": false },
        "start_layers_at_same_position":
        {
            "default_value": false,
            "enabled": false,
            "value": false
        },
        "layer_start_x":
        {
            "default_value": 105.0,
            "enabled": false
        },
        "layer_start_y":
        {
            "default_value": 27.0,
            "enabled": false
        },
        "prime_tower_position_x": {
            "default_value": 185
        },
        "prime_tower_position_y": {
            "default_value": 160
        },
        "machine_disallowed_areas": {
            "default_value": [
                [[-115,  112.5], [ -10,  112.5], [ -10,  72.5], [-115,  72.5]],
                [[ 115,  112.5], [ 115,  72.5], [ 15,  72.5], [ 15,  112.5]],
                [[-115, -112.5], [-115, -87.5], [ 115, -87.5], [ 115, -112.5]],
                [[-115, 72.5], [-97, 72.5], [-97, -112.5], [-115, -112.5]]
            ]
        }
    }
}