(kicad_pcb (version 20240108) (generator open_micro_generate) (general (thickness 1.6)) (paper "A4") (layers (0 "F.Cu" signal) (2 "In1.Cu" power "GND plane") (4 "In2.Cu" power "power and slow-signal plane") (31 "B.Cu" signal) (34 "B.Paste" user) (35 "F.Paste" user) (36 "B.SilkS" user "b.silkscreen") (37 "F.SilkS" user "f.silkscreen") (38 "B.Mask" user) (39 "F.Mask" user) (44 "Edge.Cuts" user) ) (setup (pad_to_mask_clearance 0)) (net 1 "GND") (net 2 "VBUS") (net 3 "VBUS_FUSED") (net 4 "CHG_SYS") (net 5 "BAT") (net 6 "SYS_SW") (net 7 "VDD") (net 8 "5V_RAW") (net 9 "5V_LED") (net 10 "USB_D+") (net 11 "USB_D-") (net 12 "CC1") (net 13 "CC2") (net 14 "SWDIO") (net 15 "SWCLK") (net 16 "RESET") (net 17 "XL1") (net 18 "XL2") (net 19 "DCCH") (net 20 "BOOST_SW") (net 21 "BOOST_FB") (net 22 "RGB_LV") (net 23 "RGB_5V_PRE") (net 24 "RGB_DATA") (net 25 "RGB_RETURN") (net 26 "LED_EN") (net 27 "BAT_SENSE") (net 28 "CHG_MODE0") (net 29 "CHG_MODE1") (net 30 "CHG_STATUS") (net 31 "CHG_PGOOD") (net 32 "CHG_ILIM") (net 33 "CHG_ISET") (net 34 "CHG_TS") (net 35 "PWR_BASE") (net 36 "USB_AUTO") (net 37 "TOUCH_SNS") (net 38 "TOUCH_SNSK") (net 39 "TOUCH_OUT") (net 40 "TOUCH") (net 41 "ENC_A") (net 42 "ENC_B") (net 43 "ENC_PRESS") (net 44 "MX1") (net 45 "MX2") (net 46 "MX3") (net 47 "MX4") (net 48 "MX5") (net 49 "MX6") (net 50 "MX7") (net 51 "MX8") (net 52 "MX9") (net 53 "MX10") (net 54 "MX11") (net 55 "MX12") (net 56 "RGB_CHAIN1") (net 57 "RGB_CHAIN2") (net 58 "RGB_CHAIN3") (net 59 "RGB_CHAIN4") (net 60 "RGB_CHAIN5") (net 61 "RGB_CHAIN6") (net 62 "RGB_CHAIN7") (net 63 "RGB_CHAIN8") (net 64 "RGB_CHAIN9") (net 65 "RGB_CHAIN10") (net 66 "RGB_CHAIN11") (net 67 "RGB_CHAIN12") (net 68 "RGB_SIDE1") (net 69 "RGB_SIDE2") (net 70 "RGB_SIDE3") (net 71 "RGB_SIDE4") (net 72 "RGB_SIDE5") (net 73 "RGB_SIDE6") (net 74 "RGB_SIDE7") (net 75 "RGB_SIDE8") (net 76 "USB_CONN_D+") (net 77 "USB_CONN_D-") (gr_line (start 11 0) (end 85 0) (stroke (width 0.1) (type default)) (layer "Edge.Cuts")) (gr_arc (start 85 0) (mid 92.778 3.222) (end 96 11) (stroke (width 0.1) (type default)) (layer "Edge.Cuts")) (gr_line (start 96 11) (end 96 85) (stroke (width 0.1) (type default)) (layer "Edge.Cuts")) (gr_arc (start 96 85) (mid 92.778 92.778) (end 85 96) (stroke (width 0.1) (type default)) (layer "Edge.Cuts")) (gr_line (start 85 96) (end 11 96) (stroke (width 0.1) (type default)) (layer "Edge.Cuts")) (gr_arc (start 11 96) (mid 3.222 92.778) (end 0 85) (stroke (width 0.1) (type default)) (layer "Edge.Cuts")) (gr_line (start 0 85) (end 0 11) (stroke (width 0.1) (type default)) (layer "Edge.Cuts")) (gr_arc (start 0 11) (mid 3.222 3.222) (end 11 0) (stroke (width 0.1) (type default)) (layer "Edge.Cuts")) (gr_rect (start 54 87) (end 78 96) (stroke (width 0.2) (type dash_dot)) (fill none) (layer "Dwgs.User")) (gr_text "OPEN MICRO 1.0 / top_control_pcb" (at 48 91) (layer "F.SilkS") (effects (font (size 1.1 1.1) (thickness 0.18)))) (gr_text "ANTENNA / ALL-LAYER NO COPPER" (at 66 92.5) (layer "F.SilkS") (effects (font (size 0.65 0.65) (thickness 0.11)))) (footprint "MountingHole:MountingHole_2.4mm_M2" (layer "F.Cu") (at 7 7) (property "Reference" "H1" (at 0 -3 0) (layer "F.Fab") (effects (font (size 0.8 0.8)))) (property "Value" "M2 mounting hole" (at 0 3 0) (layer "F.Fab") (effects (font (size 0.7 0.7)))) (attr exclude_from_pos_files exclude_from_bom) (fp_circle (center 0 0) (end 1.7 0) (stroke (width 0.15) (type default)) (fill none) (layer "F.Fab")) (pad "" np_thru_hole circle (at 0 0) (size 2.4 2.4) (drill 2.4) (layers "*.Cu" "*.Mask")) ) (footprint "MountingHole:MountingHole_2.4mm_M2" (layer "F.Cu") (at 89 7) (property "Reference" "H2" (at 0 -3 0) (layer "F.Fab") (effects (font (size 0.8 0.8)))) (property "Value" "M2 mounting hole" (at 0 3 0) (layer "F.Fab") (effects (font (size 0.7 0.7)))) (attr exclude_from_pos_files exclude_from_bom) (fp_circle (center 0 0) (end 1.7 0) (stroke (width 0.15) (type default)) (fill none) (layer "F.Fab")) (pad "" np_thru_hole circle (at 0 0) (size 2.4 2.4) (drill 2.4) (layers "*.Cu" "*.Mask")) ) (footprint "MountingHole:MountingHole_2.4mm_M2" (layer "F.Cu") (at 6 61) (property "Reference" "H3" (at 0 -3 0) (layer "F.Fab") (effects (font (size 0.8 0.8)))) (property "Value" "M2 mounting hole" (at 0 3 0) (layer "F.Fab") (effects (font (size 0.7 0.7)))) (attr exclude_from_pos_files exclude_from_bom) (fp_circle (center 0 0) (end 1.7 0) (stroke (width 0.15) (type default)) (fill none) (layer "F.Fab")) (pad "" np_thru_hole circle (at 0 0) (size 2.4 2.4) (drill 2.4) (layers "*.Cu" "*.Mask")) ) (footprint "MountingHole:MountingHole_2.4mm_M2" (layer "F.Cu") (at 80 28) (property "Reference" "H4" (at 0 -3 0) (layer "F.Fab") (effects (font (size 0.8 0.8)))) (property "Value" "M2 mounting hole" (at 0 3 0) (layer "F.Fab") (effects (font (size 0.7 0.7)))) (attr exclude_from_pos_files exclude_from_bom) (fp_circle (center 0 0) (end 1.7 0) (stroke (width 0.15) (type default)) (fill none) (layer "F.Fab")) (pad "" np_thru_hole circle (at 0 0) (size 2.4 2.4) (drill 2.4) (layers "*.Cu" "*.Mask")) ) (footprint "OpenMicro:Kailh_CPG151101S11_Hotswap" (layer "B.Cu") (at 38.475 19.425) (property "Reference" "SW1" (at 0 -3 0) (layer "B.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "CPG151101S11-16" (at 0 3 0) (layer "B.Fab") (effects (font (size 0.7 0.7)) (justify mirror))) (property "LCSC Part #" "C5156480" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (property "Assembly" "HAND" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (attr smd) (fp_rect (start -7.415 -6.75) (end 8.635 -0.86) (stroke (width 0.15) (type default)) (fill none) (layer "B.Fab")) (pad "" np_thru_hole circle (at 0 0) (size 3.988 3.988) (drill 3.988) (layers "*.Cu" "*.Mask")) (pad "" np_thru_hole circle (at -5.08 0) (size 1.75 1.75) (drill 1.75) (layers "*.Cu" "*.Mask")) (pad "" np_thru_hole circle (at 5.08 0) (size 1.75 1.75) (drill 1.75) (layers "*.Cu" "*.Mask")) (pad "1" thru_hole circle (at 3.81 -2.54) (size 3.3 3.3) (drill 3) (property pad_prop_mechanical) (layers "*.Cu" "*.Mask") (net 44 "MX1")) (pad "1" smd rect (at 5.635 -2.54) (size 1.65 2.5) (layers "B.Cu") (net 44 "MX1")) (pad "1" smd roundrect (at 7.36 -2.54) (size 2.55 2.5) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 44 "MX1")) (pad "2" thru_hole circle (at -2.54 -5.08) (size 3.3 3.3) (drill 3) (property pad_prop_mechanical) (layers "*.Cu" "*.Mask") (net 1 "GND")) (pad "2" smd rect (at -4.34 -5.08) (size 1.65 2.5) (layers "B.Cu") (net 1 "GND")) (pad "2" smd roundrect (at -6.09 -5.08) (size 2.55 2.5) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (zone_connect 2) (net 1 "GND")) (fp_rect (start -7.415 -6.75) (end 8.635 -0.86) (stroke (width 0.05) (type default)) (fill none) (layer "B.CrtYd")) ) (footprint "OpenMicro:SK6812MINI-E_ReverseMount" (layer "B.Cu") (at 38.475 25.525) (property "Reference" "D1" (at 0 -3 0) (layer "B.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "SK6812MINI-E" (at 0 3 0) (layer "B.Fab") (effects (font (size 0.7 0.7)) (justify mirror))) (property "LCSC Part #" "C5149201" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (property "Assembly" "SMT" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (attr smd) (fp_rect (start -1.8 -1.6) (end 1.8 1.6) (stroke (width 0.15) (type default)) (fill none) (layer "B.Fab")) (fp_rect (start -1.6 -1.4) (end 1.6 1.4) (stroke (width 0.12) (type default)) (fill none) (layer "Edge.Cuts")) (pad "1" smd roundrect (at -2.725 0.75) (size 1.35 0.82) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 9 "5V_LED")) (pad "2" smd roundrect (at -2.725 -0.75) (size 1.35 0.82) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 56 "RGB_CHAIN1")) (pad "3" smd roundrect (at 2.725 -0.75) (size 1.35 0.82) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (zone_connect 2) (net 1 "GND")) (pad "4" smd roundrect (at 2.725 0.75) (size 1.35 0.82) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 24 "RGB_DATA")) (fp_rect (start -1.8 -1.6) (end 1.8 1.6) (stroke (width 0.05) (type default)) (fill none) (layer "B.CrtYd")) ) (footprint "OpenMicro:Kailh_CPG151101S11_Hotswap" (layer "B.Cu") (at 57.525 19.425) (property "Reference" "SW2" (at 0 -3 0) (layer "B.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "CPG151101S11-16" (at 0 3 0) (layer "B.Fab") (effects (font (size 0.7 0.7)) (justify mirror))) (property "LCSC Part #" "C5156480" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (property "Assembly" "HAND" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (attr smd) (fp_rect (start -7.415 -6.75) (end 8.635 -0.86) (stroke (width 0.15) (type default)) (fill none) (layer "B.Fab")) (pad "" np_thru_hole circle (at 0 0) (size 3.988 3.988) (drill 3.988) (layers "*.Cu" "*.Mask")) (pad "" np_thru_hole circle (at -5.08 0) (size 1.75 1.75) (drill 1.75) (layers "*.Cu" "*.Mask")) (pad "" np_thru_hole circle (at 5.08 0) (size 1.75 1.75) (drill 1.75) (layers "*.Cu" "*.Mask")) (pad "1" thru_hole circle (at 3.81 -2.54) (size 3.3 3.3) (drill 3) (property pad_prop_mechanical) (layers "*.Cu" "*.Mask") (net 45 "MX2")) (pad "1" smd rect (at 5.635 -2.54) (size 1.65 2.5) (layers "B.Cu") (net 45 "MX2")) (pad "1" smd roundrect (at 7.36 -2.54) (size 2.55 2.5) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 45 "MX2")) (pad "2" thru_hole circle (at -2.54 -5.08) (size 3.3 3.3) (drill 3) (property pad_prop_mechanical) (layers "*.Cu" "*.Mask") (net 1 "GND")) (pad "2" smd rect (at -4.34 -5.08) (size 1.65 2.5) (layers "B.Cu") (net 1 "GND")) (pad "2" smd roundrect (at -6.09 -5.08) (size 2.55 2.5) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (zone_connect 2) (net 1 "GND")) (fp_rect (start -7.415 -6.75) (end 8.635 -0.86) (stroke (width 0.05) (type default)) (fill none) (layer "B.CrtYd")) ) (footprint "OpenMicro:SK6812MINI-E_ReverseMount" (layer "B.Cu") (at 57.525 25.525) (property "Reference" "D2" (at 0 -3 0) (layer "B.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "SK6812MINI-E" (at 0 3 0) (layer "B.Fab") (effects (font (size 0.7 0.7)) (justify mirror))) (property "LCSC Part #" "C5149201" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (property "Assembly" "SMT" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (attr smd) (fp_rect (start -1.8 -1.6) (end 1.8 1.6) (stroke (width 0.15) (type default)) (fill none) (layer "B.Fab")) (fp_rect (start -1.6 -1.4) (end 1.6 1.4) (stroke (width 0.12) (type default)) (fill none) (layer "Edge.Cuts")) (pad "1" smd roundrect (at -2.725 0.75) (size 1.35 0.82) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 9 "5V_LED")) (pad "2" smd roundrect (at -2.725 -0.75) (size 1.35 0.82) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 57 "RGB_CHAIN2")) (pad "3" smd roundrect (at 2.725 -0.75) (size 1.35 0.82) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (zone_connect 2) (net 1 "GND")) (pad "4" smd roundrect (at 2.725 0.75) (size 1.35 0.82) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 56 "RGB_CHAIN1")) (fp_rect (start -1.8 -1.6) (end 1.8 1.6) (stroke (width 0.05) (type default)) (fill none) (layer "B.CrtYd")) ) (footprint "OpenMicro:Kailh_CPG151101S11_Hotswap" (layer "B.Cu") (at 19.425 38.475) (property "Reference" "SW3" (at 0 -3 0) (layer "B.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "CPG151101S11-16" (at 0 3 0) (layer "B.Fab") (effects (font (size 0.7 0.7)) (justify mirror))) (property "LCSC Part #" "C5156480" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (property "Assembly" "HAND" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (attr smd) (fp_rect (start -7.415 -6.75) (end 8.635 -0.86) (stroke (width 0.15) (type default)) (fill none) (layer "B.Fab")) (pad "" np_thru_hole circle (at 0 0) (size 3.988 3.988) (drill 3.988) (layers "*.Cu" "*.Mask")) (pad "" np_thru_hole circle (at -5.08 0) (size 1.75 1.75) (drill 1.75) (layers "*.Cu" "*.Mask")) (pad "" np_thru_hole circle (at 5.08 0) (size 1.75 1.75) (drill 1.75) (layers "*.Cu" "*.Mask")) (pad "1" thru_hole circle (at 3.81 -2.54) (size 3.3 3.3) (drill 3) (property pad_prop_mechanical) (layers "*.Cu" "*.Mask") (net 46 "MX3")) (pad "1" smd rect (at 5.635 -2.54) (size 1.65 2.5) (layers "B.Cu") (net 46 "MX3")) (pad "1" smd roundrect (at 7.36 -2.54) (size 2.55 2.5) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 46 "MX3")) (pad "2" thru_hole circle (at -2.54 -5.08) (size 3.3 3.3) (drill 3) (property pad_prop_mechanical) (layers "*.Cu" "*.Mask") (net 1 "GND")) (pad "2" smd rect (at -4.34 -5.08) (size 1.65 2.5) (layers "B.Cu") (net 1 "GND")) (pad "2" smd roundrect (at -6.09 -5.08) (size 2.55 2.5) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (zone_connect 2) (net 1 "GND")) (fp_rect (start -7.415 -6.75) (end 8.635 -0.86) (stroke (width 0.05) (type default)) (fill none) (layer "B.CrtYd")) ) (footprint "OpenMicro:SK6812MINI-E_ReverseMount" (layer "B.Cu") (at 19.425 44.575) (property "Reference" "D3" (at 0 -3 0) (layer "B.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "SK6812MINI-E" (at 0 3 0) (layer "B.Fab") (effects (font (size 0.7 0.7)) (justify mirror))) (property "LCSC Part #" "C5149201" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (property "Assembly" "SMT" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (attr smd) (fp_rect (start -1.8 -1.6) (end 1.8 1.6) (stroke (width 0.15) (type default)) (fill none) (layer "B.Fab")) (fp_rect (start -1.6 -1.4) (end 1.6 1.4) (stroke (width 0.12) (type default)) (fill none) (layer "Edge.Cuts")) (pad "1" smd roundrect (at -2.725 0.75) (size 1.35 0.82) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 9 "5V_LED")) (pad "2" smd roundrect (at -2.725 -0.75) (size 1.35 0.82) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 61 "RGB_CHAIN6")) (pad "3" smd roundrect (at 2.725 -0.75) (size 1.35 0.82) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (zone_connect 2) (net 1 "GND")) (pad "4" smd roundrect (at 2.725 0.75) (size 1.35 0.82) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 60 "RGB_CHAIN5")) (fp_rect (start -1.8 -1.6) (end 1.8 1.6) (stroke (width 0.05) (type default)) (fill none) (layer "B.CrtYd")) ) (footprint "OpenMicro:Kailh_CPG151101S11_Hotswap" (layer "B.Cu") (at 38.475 38.475) (property "Reference" "SW4" (at 0 -3 0) (layer "B.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "CPG151101S11-16" (at 0 3 0) (layer "B.Fab") (effects (font (size 0.7 0.7)) (justify mirror))) (property "LCSC Part #" "C5156480" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (property "Assembly" "HAND" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (attr smd) (fp_rect (start -7.415 -6.75) (end 8.635 -0.86) (stroke (width 0.15) (type default)) (fill none) (layer "B.Fab")) (pad "" np_thru_hole circle (at 0 0) (size 3.988 3.988) (drill 3.988) (layers "*.Cu" "*.Mask")) (pad "" np_thru_hole circle (at -5.08 0) (size 1.75 1.75) (drill 1.75) (layers "*.Cu" "*.Mask")) (pad "" np_thru_hole circle (at 5.08 0) (size 1.75 1.75) (drill 1.75) (layers "*.Cu" "*.Mask")) (pad "1" thru_hole circle (at 3.81 -2.54) (size 3.3 3.3) (drill 3) (property pad_prop_mechanical) (layers "*.Cu" "*.Mask") (net 47 "MX4")) (pad "1" smd rect (at 5.635 -2.54) (size 1.65 2.5) (layers "B.Cu") (net 47 "MX4")) (pad "1" smd roundrect (at 7.36 -2.54) (size 2.55 2.5) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 47 "MX4")) (pad "2" thru_hole circle (at -2.54 -5.08) (size 3.3 3.3) (drill 3) (property pad_prop_mechanical) (layers "*.Cu" "*.Mask") (net 1 "GND")) (pad "2" smd rect (at -4.34 -5.08) (size 1.65 2.5) (layers "B.Cu") (net 1 "GND")) (pad "2" smd roundrect (at -6.09 -5.08) (size 2.55 2.5) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (zone_connect 2) (net 1 "GND")) (fp_rect (start -7.415 -6.75) (end 8.635 -0.86) (stroke (width 0.05) (type default)) (fill none) (layer "B.CrtYd")) ) (footprint "OpenMicro:SK6812MINI-E_ReverseMount" (layer "B.Cu") (at 38.475 44.575) (property "Reference" "D4" (at 0 -3 0) (layer "B.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "SK6812MINI-E" (at 0 3 0) (layer "B.Fab") (effects (font (size 0.7 0.7)) (justify mirror))) (property "LCSC Part #" "C5149201" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (property "Assembly" "SMT" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (attr smd) (fp_rect (start -1.8 -1.6) (end 1.8 1.6) (stroke (width 0.15) (type default)) (fill none) (layer "B.Fab")) (fp_rect (start -1.6 -1.4) (end 1.6 1.4) (stroke (width 0.12) (type default)) (fill none) (layer "Edge.Cuts")) (pad "1" smd roundrect (at -2.725 0.75) (size 1.35 0.82) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 9 "5V_LED")) (pad "2" smd roundrect (at -2.725 -0.75) (size 1.35 0.82) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 60 "RGB_CHAIN5")) (pad "3" smd roundrect (at 2.725 -0.75) (size 1.35 0.82) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (zone_connect 2) (net 1 "GND")) (pad "4" smd roundrect (at 2.725 0.75) (size 1.35 0.82) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 59 "RGB_CHAIN4")) (fp_rect (start -1.8 -1.6) (end 1.8 1.6) (stroke (width 0.05) (type default)) (fill none) (layer "B.CrtYd")) ) (footprint "OpenMicro:Kailh_CPG151101S11_Hotswap" (layer "B.Cu") (at 57.525 38.475) (property "Reference" "SW5" (at 0 -3 0) (layer "B.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "CPG151101S11-16" (at 0 3 0) (layer "B.Fab") (effects (font (size 0.7 0.7)) (justify mirror))) (property "LCSC Part #" "C5156480" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (property "Assembly" "HAND" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (attr smd) (fp_rect (start -7.415 -6.75) (end 8.635 -0.86) (stroke (width 0.15) (type default)) (fill none) (layer "B.Fab")) (pad "" np_thru_hole circle (at 0 0) (size 3.988 3.988) (drill 3.988) (layers "*.Cu" "*.Mask")) (pad "" np_thru_hole circle (at -5.08 0) (size 1.75 1.75) (drill 1.75) (layers "*.Cu" "*.Mask")) (pad "" np_thru_hole circle (at 5.08 0) (size 1.75 1.75) (drill 1.75) (layers "*.Cu" "*.Mask")) (pad "1" thru_hole circle (at 3.81 -2.54) (size 3.3 3.3) (drill 3) (property pad_prop_mechanical) (layers "*.Cu" "*.Mask") (net 48 "MX5")) (pad "1" smd rect (at 5.635 -2.54) (size 1.65 2.5) (layers "B.Cu") (net 48 "MX5")) (pad "1" smd roundrect (at 7.36 -2.54) (size 2.55 2.5) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 48 "MX5")) (pad "2" thru_hole circle (at -2.54 -5.08) (size 3.3 3.3) (drill 3) (property pad_prop_mechanical) (layers "*.Cu" "*.Mask") (net 1 "GND")) (pad "2" smd rect (at -4.34 -5.08) (size 1.65 2.5) (layers "B.Cu") (net 1 "GND")) (pad "2" smd roundrect (at -6.09 -5.08) (size 2.55 2.5) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (zone_connect 2) (net 1 "GND")) (fp_rect (start -7.415 -6.75) (end 8.635 -0.86) (stroke (width 0.05) (type default)) (fill none) (layer "B.CrtYd")) ) (footprint "OpenMicro:SK6812MINI-E_ReverseMount" (layer "B.Cu") (at 57.525 44.575) (property "Reference" "D5" (at 0 -3 0) (layer "B.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "SK6812MINI-E" (at 0 3 0) (layer "B.Fab") (effects (font (size 0.7 0.7)) (justify mirror))) (property "LCSC Part #" "C5149201" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (property "Assembly" "SMT" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (attr smd) (fp_rect (start -1.8 -1.6) (end 1.8 1.6) (stroke (width 0.15) (type default)) (fill none) (layer "B.Fab")) (fp_rect (start -1.6 -1.4) (end 1.6 1.4) (stroke (width 0.12) (type default)) (fill none) (layer "Edge.Cuts")) (pad "1" smd roundrect (at -2.725 0.75) (size 1.35 0.82) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 9 "5V_LED")) (pad "2" smd roundrect (at -2.725 -0.75) (size 1.35 0.82) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 59 "RGB_CHAIN4")) (pad "3" smd roundrect (at 2.725 -0.75) (size 1.35 0.82) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (zone_connect 2) (net 1 "GND")) (pad "4" smd roundrect (at 2.725 0.75) (size 1.35 0.82) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 58 "RGB_CHAIN3")) (fp_rect (start -1.8 -1.6) (end 1.8 1.6) (stroke (width 0.05) (type default)) (fill none) (layer "B.CrtYd")) ) (footprint "OpenMicro:Kailh_CPG151101S11_Hotswap" (layer "B.Cu") (at 76.575 38.475) (property "Reference" "SW6" (at 0 -3 0) (layer "B.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "CPG151101S11-16" (at 0 3 0) (layer "B.Fab") (effects (font (size 0.7 0.7)) (justify mirror))) (property "LCSC Part #" "C5156480" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (property "Assembly" "HAND" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (attr smd) (fp_rect (start -7.415 -6.75) (end 8.635 -0.86) (stroke (width 0.15) (type default)) (fill none) (layer "B.Fab")) (pad "" np_thru_hole circle (at 0 0) (size 3.988 3.988) (drill 3.988) (layers "*.Cu" "*.Mask")) (pad "" np_thru_hole circle (at -5.08 0) (size 1.75 1.75) (drill 1.75) (layers "*.Cu" "*.Mask")) (pad "" np_thru_hole circle (at 5.08 0) (size 1.75 1.75) (drill 1.75) (layers "*.Cu" "*.Mask")) (pad "1" thru_hole circle (at 3.81 -2.54) (size 3.3 3.3) (drill 3) (property pad_prop_mechanical) (layers "*.Cu" "*.Mask") (net 49 "MX6")) (pad "1" smd rect (at 5.635 -2.54) (size 1.65 2.5) (layers "B.Cu") (net 49 "MX6")) (pad "1" smd roundrect (at 7.36 -2.54) (size 2.55 2.5) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 49 "MX6")) (pad "2" thru_hole circle (at -2.54 -5.08) (size 3.3 3.3) (drill 3) (property pad_prop_mechanical) (layers "*.Cu" "*.Mask") (zone_connect 2) (net 1 "GND")) (pad "2" smd rect (at -4.34 -5.08) (size 1.65 2.5) (layers "B.Cu") (zone_connect 2) (net 1 "GND")) (pad "2" smd roundrect (at -6.09 -5.08) (size 2.55 2.5) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (zone_connect 2) (net 1 "GND")) (fp_rect (start -7.415 -6.75) (end 8.635 -0.86) (stroke (width 0.05) (type default)) (fill none) (layer "B.CrtYd")) ) (footprint "OpenMicro:SK6812MINI-E_ReverseMount" (layer "B.Cu") (at 76.575 44.575) (property "Reference" "D6" (at 0 -3 0) (layer "B.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "SK6812MINI-E" (at 0 3 0) (layer "B.Fab") (effects (font (size 0.7 0.7)) (justify mirror))) (property "LCSC Part #" "C5149201" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (property "Assembly" "SMT" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (attr smd) (fp_rect (start -1.8 -1.6) (end 1.8 1.6) (stroke (width 0.15) (type default)) (fill none) (layer "B.Fab")) (fp_rect (start -1.6 -1.4) (end 1.6 1.4) (stroke (width 0.12) (type default)) (fill none) (layer "Edge.Cuts")) (pad "1" smd roundrect (at -2.725 0.75) (size 1.35 0.82) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 9 "5V_LED")) (pad "2" smd roundrect (at -2.725 -0.75) (size 1.35 0.82) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 58 "RGB_CHAIN3")) (pad "3" smd roundrect (at 2.725 -0.75) (size 1.35 0.82) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (zone_connect 2) (net 1 "GND")) (pad "4" smd roundrect (at 2.725 0.75) (size 1.35 0.82) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 57 "RGB_CHAIN2")) (fp_rect (start -1.8 -1.6) (end 1.8 1.6) (stroke (width 0.05) (type default)) (fill none) (layer "B.CrtYd")) ) (footprint "OpenMicro:Kailh_CPG151101S11_Hotswap" (layer "B.Cu") (at 19.425 57.525) (property "Reference" "SW7" (at 0 -3 0) (layer "B.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "CPG151101S11-16" (at 0 3 0) (layer "B.Fab") (effects (font (size 0.7 0.7)) (justify mirror))) (property "LCSC Part #" "C5156480" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (property "Assembly" "HAND" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (attr smd) (fp_rect (start -7.415 -6.75) (end 8.635 -0.86) (stroke (width 0.15) (type default)) (fill none) (layer "B.Fab")) (pad "" np_thru_hole circle (at 0 0) (size 3.988 3.988) (drill 3.988) (layers "*.Cu" "*.Mask")) (pad "" np_thru_hole circle (at -5.08 0) (size 1.75 1.75) (drill 1.75) (layers "*.Cu" "*.Mask")) (pad "" np_thru_hole circle (at 5.08 0) (size 1.75 1.75) (drill 1.75) (layers "*.Cu" "*.Mask")) (pad "1" thru_hole circle (at 3.81 -2.54) (size 3.3 3.3) (drill 3) (property pad_prop_mechanical) (layers "*.Cu" "*.Mask") (net 50 "MX7")) (pad "1" smd rect (at 5.635 -2.54) (size 1.65 2.5) (layers "B.Cu") (net 50 "MX7")) (pad "1" smd roundrect (at 7.36 -2.54) (size 2.55 2.5) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 50 "MX7")) (pad "2" thru_hole circle (at -2.54 -5.08) (size 3.3 3.3) (drill 3) (property pad_prop_mechanical) (layers "*.Cu" "*.Mask") (net 1 "GND")) (pad "2" smd rect (at -4.34 -5.08) (size 1.65 2.5) (layers "B.Cu") (net 1 "GND")) (pad "2" smd roundrect (at -6.09 -5.08) (size 2.55 2.5) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (zone_connect 2) (net 1 "GND")) (fp_rect (start -7.415 -6.75) (end 8.635 -0.86) (stroke (width 0.05) (type default)) (fill none) (layer "B.CrtYd")) ) (footprint "OpenMicro:SK6812MINI-E_ReverseMount" (layer "B.Cu") (at 19.425 63.625) (property "Reference" "D7" (at 0 -3 0) (layer "B.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "SK6812MINI-E" (at 0 3 0) (layer "B.Fab") (effects (font (size 0.7 0.7)) (justify mirror))) (property "LCSC Part #" "C5149201" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (property "Assembly" "SMT" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (attr smd) (fp_rect (start -1.8 -1.6) (end 1.8 1.6) (stroke (width 0.15) (type default)) (fill none) (layer "B.Fab")) (fp_rect (start -1.6 -1.4) (end 1.6 1.4) (stroke (width 0.12) (type default)) (fill none) (layer "Edge.Cuts")) (pad "1" smd roundrect (at -2.725 0.75) (size 1.35 0.82) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 9 "5V_LED")) (pad "2" smd roundrect (at -2.725 -0.75) (size 1.35 0.82) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 62 "RGB_CHAIN7")) (pad "3" smd roundrect (at 2.725 -0.75) (size 1.35 0.82) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (zone_connect 2) (net 1 "GND")) (pad "4" smd roundrect (at 2.725 0.75) (size 1.35 0.82) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 61 "RGB_CHAIN6")) (fp_rect (start -1.8 -1.6) (end 1.8 1.6) (stroke (width 0.05) (type default)) (fill none) (layer "B.CrtYd")) ) (footprint "OpenMicro:Kailh_CPG151101S11_Hotswap" (layer "B.Cu") (at 38.475 57.525) (property "Reference" "SW8" (at 0 -3 0) (layer "B.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "CPG151101S11-16" (at 0 3 0) (layer "B.Fab") (effects (font (size 0.7 0.7)) (justify mirror))) (property "LCSC Part #" "C5156480" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (property "Assembly" "HAND" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (attr smd) (fp_rect (start -7.415 -6.75) (end 8.635 -0.86) (stroke (width 0.15) (type default)) (fill none) (layer "B.Fab")) (pad "" np_thru_hole circle (at 0 0) (size 3.988 3.988) (drill 3.988) (layers "*.Cu" "*.Mask")) (pad "" np_thru_hole circle (at -5.08 0) (size 1.75 1.75) (drill 1.75) (layers "*.Cu" "*.Mask")) (pad "" np_thru_hole circle (at 5.08 0) (size 1.75 1.75) (drill 1.75) (layers "*.Cu" "*.Mask")) (pad "1" thru_hole circle (at 3.81 -2.54) (size 3.3 3.3) (drill 3) (property pad_prop_mechanical) (layers "*.Cu" "*.Mask") (net 51 "MX8")) (pad "1" smd rect (at 5.635 -2.54) (size 1.65 2.5) (layers "B.Cu") (net 51 "MX8")) (pad "1" smd roundrect (at 7.36 -2.54) (size 2.55 2.5) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 51 "MX8")) (pad "2" thru_hole circle (at -2.54 -5.08) (size 3.3 3.3) (drill 3) (property pad_prop_mechanical) (layers "*.Cu" "*.Mask") (net 1 "GND")) (pad "2" smd rect (at -4.34 -5.08) (size 1.65 2.5) (layers "B.Cu") (net 1 "GND")) (pad "2" smd roundrect (at -6.09 -5.08) (size 2.55 2.5) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (zone_connect 2) (net 1 "GND")) (fp_rect (start -7.415 -6.75) (end 8.635 -0.86) (stroke (width 0.05) (type default)) (fill none) (layer "B.CrtYd")) ) (footprint "OpenMicro:SK6812MINI-E_ReverseMount" (layer "B.Cu") (at 38.475 63.625) (property "Reference" "D8" (at 0 -3 0) (layer "B.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "SK6812MINI-E" (at 0 3 0) (layer "B.Fab") (effects (font (size 0.7 0.7)) (justify mirror))) (property "LCSC Part #" "C5149201" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (property "Assembly" "SMT" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (attr smd) (fp_rect (start -1.8 -1.6) (end 1.8 1.6) (stroke (width 0.15) (type default)) (fill none) (layer "B.Fab")) (fp_rect (start -1.6 -1.4) (end 1.6 1.4) (stroke (width 0.12) (type default)) (fill none) (layer "Edge.Cuts")) (pad "1" smd roundrect (at -2.725 0.75) (size 1.35 0.82) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 9 "5V_LED")) (pad "2" smd roundrect (at -2.725 -0.75) (size 1.35 0.82) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 63 "RGB_CHAIN8")) (pad "3" smd roundrect (at 2.725 -0.75) (size 1.35 0.82) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (zone_connect 2) (net 1 "GND")) (pad "4" smd roundrect (at 2.725 0.75) (size 1.35 0.82) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 62 "RGB_CHAIN7")) (fp_rect (start -1.8 -1.6) (end 1.8 1.6) (stroke (width 0.05) (type default)) (fill none) (layer "B.CrtYd")) ) (footprint "OpenMicro:Kailh_CPG151101S11_Hotswap" (layer "B.Cu") (at 57.525 57.525) (property "Reference" "SW9" (at 0 -3 0) (layer "B.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "CPG151101S11-16" (at 0 3 0) (layer "B.Fab") (effects (font (size 0.7 0.7)) (justify mirror))) (property "LCSC Part #" "C5156480" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (property "Assembly" "HAND" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (attr smd) (fp_rect (start -7.415 -6.75) (end 8.635 -0.86) (stroke (width 0.15) (type default)) (fill none) (layer "B.Fab")) (pad "" np_thru_hole circle (at 0 0) (size 3.988 3.988) (drill 3.988) (layers "*.Cu" "*.Mask")) (pad "" np_thru_hole circle (at -5.08 0) (size 1.75 1.75) (drill 1.75) (layers "*.Cu" "*.Mask")) (pad "" np_thru_hole circle (at 5.08 0) (size 1.75 1.75) (drill 1.75) (layers "*.Cu" "*.Mask")) (pad "1" thru_hole circle (at 3.81 -2.54) (size 3.3 3.3) (drill 3) (property pad_prop_mechanical) (layers "*.Cu" "*.Mask") (net 52 "MX9")) (pad "1" smd rect (at 5.635 -2.54) (size 1.65 2.5) (layers "B.Cu") (net 52 "MX9")) (pad "1" smd roundrect (at 7.36 -2.54) (size 2.55 2.5) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 52 "MX9")) (pad "2" thru_hole circle (at -2.54 -5.08) (size 3.3 3.3) (drill 3) (property pad_prop_mechanical) (layers "*.Cu" "*.Mask") (net 1 "GND")) (pad "2" smd rect (at -4.34 -5.08) (size 1.65 2.5) (layers "B.Cu") (net 1 "GND")) (pad "2" smd roundrect (at -6.09 -5.08) (size 2.55 2.5) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (zone_connect 2) (net 1 "GND")) (fp_rect (start -7.415 -6.75) (end 8.635 -0.86) (stroke (width 0.05) (type default)) (fill none) (layer "B.CrtYd")) ) (footprint "OpenMicro:SK6812MINI-E_ReverseMount" (layer "B.Cu") (at 57.525 63.625) (property "Reference" "D9" (at 0 -3 0) (layer "B.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "SK6812MINI-E" (at 0 3 0) (layer "B.Fab") (effects (font (size 0.7 0.7)) (justify mirror))) (property "LCSC Part #" "C5149201" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (property "Assembly" "SMT" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (attr smd) (fp_rect (start -1.8 -1.6) (end 1.8 1.6) (stroke (width 0.15) (type default)) (fill none) (layer "B.Fab")) (fp_rect (start -1.6 -1.4) (end 1.6 1.4) (stroke (width 0.12) (type default)) (fill none) (layer "Edge.Cuts")) (pad "1" smd roundrect (at -2.725 0.75) (size 1.35 0.82) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 9 "5V_LED")) (pad "2" smd roundrect (at -2.725 -0.75) (size 1.35 0.82) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 64 "RGB_CHAIN9")) (pad "3" smd roundrect (at 2.725 -0.75) (size 1.35 0.82) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (zone_connect 2) (net 1 "GND")) (pad "4" smd roundrect (at 2.725 0.75) (size 1.35 0.82) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 63 "RGB_CHAIN8")) (fp_rect (start -1.8 -1.6) (end 1.8 1.6) (stroke (width 0.05) (type default)) (fill none) (layer "B.CrtYd")) ) (footprint "OpenMicro:Kailh_CPG151101S11_Hotswap" (layer "B.Cu") (at 76.575 57.525) (property "Reference" "SW10" (at 0 -3 0) (layer "B.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "CPG151101S11-16" (at 0 3 0) (layer "B.Fab") (effects (font (size 0.7 0.7)) (justify mirror))) (property "LCSC Part #" "C5156480" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (property "Assembly" "HAND" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (attr smd) (fp_rect (start -7.415 -6.75) (end 8.635 -0.86) (stroke (width 0.15) (type default)) (fill none) (layer "B.Fab")) (pad "" np_thru_hole circle (at 0 0) (size 3.988 3.988) (drill 3.988) (layers "*.Cu" "*.Mask")) (pad "" np_thru_hole circle (at -5.08 0) (size 1.75 1.75) (drill 1.75) (layers "*.Cu" "*.Mask")) (pad "" np_thru_hole circle (at 5.08 0) (size 1.75 1.75) (drill 1.75) (layers "*.Cu" "*.Mask")) (pad "1" thru_hole circle (at 3.81 -2.54) (size 3.3 3.3) (drill 3) (property pad_prop_mechanical) (layers "*.Cu" "*.Mask") (net 53 "MX10")) (pad "1" smd rect (at 5.635 -2.54) (size 1.65 2.5) (layers "B.Cu") (net 53 "MX10")) (pad "1" smd roundrect (at 7.36 -2.54) (size 2.55 2.5) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 53 "MX10")) (pad "2" thru_hole circle (at -2.54 -5.08) (size 3.3 3.3) (drill 3) (property pad_prop_mechanical) (layers "*.Cu" "*.Mask") (net 1 "GND")) (pad "2" smd rect (at -4.34 -5.08) (size 1.65 2.5) (layers "B.Cu") (net 1 "GND")) (pad "2" smd roundrect (at -6.09 -5.08) (size 2.55 2.5) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (zone_connect 2) (net 1 "GND")) (fp_rect (start -7.415 -6.75) (end 8.635 -0.86) (stroke (width 0.05) (type default)) (fill none) (layer "B.CrtYd")) ) (footprint "OpenMicro:SK6812MINI-E_ReverseMount" (layer "B.Cu") (at 76.575 63.4) (property "Reference" "D10" (at 0 -3 0) (layer "B.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "SK6812MINI-E" (at 0 3 0) (layer "B.Fab") (effects (font (size 0.7 0.7)) (justify mirror))) (property "LCSC Part #" "C5149201" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (property "Assembly" "SMT" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (attr smd) (fp_rect (start -1.8 -1.6) (end 1.8 1.6) (stroke (width 0.15) (type default)) (fill none) (layer "B.Fab")) (fp_rect (start -1.6 -1.4) (end 1.6 1.4) (stroke (width 0.12) (type default)) (fill none) (layer "Edge.Cuts")) (pad "1" smd roundrect (at -2.725 0.75) (size 1.35 0.82) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 9 "5V_LED")) (pad "2" smd roundrect (at -2.725 -0.75) (size 1.35 0.82) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 65 "RGB_CHAIN10")) (pad "3" smd roundrect (at 2.725 -0.75) (size 1.35 0.82) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (zone_connect 2) (net 1 "GND")) (pad "4" smd roundrect (at 2.725 0.75) (size 1.35 0.82) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 64 "RGB_CHAIN9")) (fp_rect (start -1.8 -1.6) (end 1.8 1.6) (stroke (width 0.05) (type default)) (fill none) (layer "B.CrtYd")) ) (footprint "OpenMicro:Kailh_CPG151101S11_Hotswap" (layer "B.Cu") (at 48 76.575 270) (property "Reference" "SW11" (at 0 -3 0) (layer "B.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "CPG151101S11-16" (at 0 3 0) (layer "B.Fab") (effects (font (size 0.7 0.7)) (justify mirror))) (property "LCSC Part #" "C5156480" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (property "Assembly" "HAND" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (attr smd) (fp_rect (start -7.415 -6.75) (end 8.635 -0.86) (stroke (width 0.15) (type default)) (fill none) (layer "B.Fab")) (pad "" np_thru_hole circle (at 0 0) (size 3.988 3.988) (drill 3.988) (layers "*.Cu" "*.Mask")) (pad "" np_thru_hole circle (at -5.08 0) (size 1.75 1.75) (drill 1.75) (layers "*.Cu" "*.Mask")) (pad "" np_thru_hole circle (at 5.08 0) (size 1.75 1.75) (drill 1.75) (layers "*.Cu" "*.Mask")) (pad "1" thru_hole circle (at 3.81 -2.54) (size 3.3 3.3) (drill 3) (property pad_prop_mechanical) (layers "*.Cu" "*.Mask") (net 54 "MX11")) (pad "1" smd rect (at 5.635 -2.54 270) (size 1.65 2.5) (layers "B.Cu") (net 54 "MX11")) (pad "1" smd roundrect (at 7.36 -2.54 270) (size 2.55 2.5) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 54 "MX11")) (pad "2" thru_hole circle (at -2.54 -5.08) (size 3.3 3.3) (drill 3) (property pad_prop_mechanical) (layers "*.Cu" "*.Mask") (zone_connect 2) (net 1 "GND")) (pad "2" smd rect (at -4.34 -5.08 270) (size 1.65 2.5) (layers "B.Cu") (zone_connect 2) (net 1 "GND")) (pad "2" smd roundrect (at -6.09 -5.08 270) (size 2.55 2.5) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (zone_connect 2) (net 1 "GND")) (fp_rect (start -7.415 -6.75) (end 8.635 -0.86) (stroke (width 0.05) (type default)) (fill none) (layer "B.CrtYd")) ) (footprint "OpenMicro:SK6812MINI-E_ReverseMount" (layer "B.Cu") (at 48 67.23) (property "Reference" "D11" (at 0 -3 0) (layer "B.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "SK6812MINI-E" (at 0 3 0) (layer "B.Fab") (effects (font (size 0.7 0.7)) (justify mirror))) (property "LCSC Part #" "C5149201" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (property "Assembly" "SMT" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (attr smd) (fp_rect (start -1.8 -1.6) (end 1.8 1.6) (stroke (width 0.15) (type default)) (fill none) (layer "B.Fab")) (fp_rect (start -1.6 -1.4) (end 1.6 1.4) (stroke (width 0.12) (type default)) (fill none) (layer "Edge.Cuts")) (pad "1" smd roundrect (at -2.725 0.75) (size 1.35 0.82) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 9 "5V_LED")) (pad "2" smd roundrect (at -2.725 -0.75) (size 1.35 0.82) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 67 "RGB_CHAIN12")) (pad "3" smd roundrect (at 2.725 -0.75) (size 1.35 0.82) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (zone_connect 2) (net 1 "GND")) (pad "4" smd roundrect (at 2.725 0.75) (size 1.35 0.82) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 66 "RGB_CHAIN11")) (fp_rect (start -1.8 -1.6) (end 1.8 1.6) (stroke (width 0.05) (type default)) (fill none) (layer "B.CrtYd")) ) (footprint "OpenMicro:Kailh_CPG151101S11_Hotswap" (layer "B.Cu") (at 76.575 76.575 270) (property "Reference" "SW12" (at 0 -3 0) (layer "B.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "CPG151101S11-16" (at 0 3 0) (layer "B.Fab") (effects (font (size 0.7 0.7)) (justify mirror))) (property "LCSC Part #" "C5156480" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (property "Assembly" "HAND" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (attr smd) (fp_rect (start -7.415 -6.75) (end 8.635 -0.86) (stroke (width 0.15) (type default)) (fill none) (layer "B.Fab")) (pad "" np_thru_hole circle (at 0 0) (size 3.988 3.988) (drill 3.988) (layers "*.Cu" "*.Mask")) (pad "" np_thru_hole circle (at -5.08 0) (size 1.75 1.75) (drill 1.75) (layers "*.Cu" "*.Mask")) (pad "" np_thru_hole circle (at 5.08 0) (size 1.75 1.75) (drill 1.75) (layers "*.Cu" "*.Mask")) (pad "1" thru_hole circle (at 3.81 -2.54) (size 3.3 3.3) (drill 3) (property pad_prop_mechanical) (layers "*.Cu" "*.Mask") (net 55 "MX12")) (pad "1" smd rect (at 5.635 -2.54 270) (size 1.65 2.5) (layers "B.Cu") (net 55 "MX12")) (pad "1" smd roundrect (at 7.36 -2.54 270) (size 2.55 2.5) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 55 "MX12")) (pad "2" thru_hole circle (at -2.54 -5.08) (size 3.3 3.3) (drill 3) (property pad_prop_mechanical) (layers "*.Cu" "*.Mask") (net 1 "GND")) (pad "2" smd rect (at -4.34 -5.08 270) (size 1.65 2.5) (layers "B.Cu") (net 1 "GND")) (pad "2" smd roundrect (at -6.09 -5.08 270) (size 2.55 2.5) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (zone_connect 2) (net 1 "GND")) (fp_rect (start -7.415 -6.75) (end 8.635 -0.86) (stroke (width 0.05) (type default)) (fill none) (layer "B.CrtYd")) ) (footprint "OpenMicro:SK6812MINI-E_ReverseMount" (layer "B.Cu") (at 76.575 67.23) (property "Reference" "D12" (at 0 -3 0) (layer "B.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "SK6812MINI-E" (at 0 3 0) (layer "B.Fab") (effects (font (size 0.7 0.7)) (justify mirror))) (property "LCSC Part #" "C5149201" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (property "Assembly" "SMT" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (attr smd) (fp_rect (start -1.8 -1.6) (end 1.8 1.6) (stroke (width 0.15) (type default)) (fill none) (layer "B.Fab")) (fp_rect (start -1.6 -1.4) (end 1.6 1.4) (stroke (width 0.12) (type default)) (fill none) (layer "Edge.Cuts")) (pad "1" smd roundrect (at -2.725 0.75) (size 1.35 0.82) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 9 "5V_LED")) (pad "2" smd roundrect (at -2.725 -0.75) (size 1.35 0.82) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 66 "RGB_CHAIN11")) (pad "3" smd roundrect (at 2.725 -0.75) (size 1.35 0.82) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (zone_connect 2) (net 1 "GND")) (pad "4" smd roundrect (at 2.725 0.75) (size 1.35 0.82) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 65 "RGB_CHAIN10")) (fp_rect (start -1.8 -1.6) (end 1.8 1.6) (stroke (width 0.05) (type default)) (fill none) (layer "B.CrtYd")) ) (footprint "OpenMicro:PEC11R-4215F-S0024" (layer "F.Cu") (at 19.425 19.425) (property "Reference" "ENC1" (at 0 -3 0) (layer "F.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "PEC11R-4215F-S0024" (at 0 3 0) (layer "F.Fab") (effects (font (size 0.7 0.7)))) (property "LCSC Part #" "C143790" (at 0 0 0) (layer "F.Fab") (hide yes) (effects (font (size 0.5 0.5)))) (property "Assembly" "HAND" (at 0 0 0) (layer "F.Fab") (hide yes) (effects (font (size 0.5 0.5)))) (attr through_hole) (fp_rect (start -6 -6) (end 6 6) (stroke (width 0.2) (type default)) (fill none) (layer "F.Fab")) (pad "A" thru_hole circle (at -2.5 7.5) (size 1.8 1.8) (drill 1) (layers "*.Cu" "*.Mask") (net 41 "ENC_A")) (pad "C" thru_hole circle (at 0 7.5) (size 1.8 1.8) (drill 1) (layers "*.Cu" "*.Mask") (zone_connect 2) (net 1 "GND")) (pad "B" thru_hole circle (at 2.5 7.5) (size 1.8 1.8) (drill 1) (layers "*.Cu" "*.Mask") (net 42 "ENC_B")) (pad "S1" thru_hole circle (at -7 -2.5) (size 1.8 1.8) (drill 1) (layers "*.Cu" "*.Mask") (net 43 "ENC_PRESS")) (pad "S2" thru_hole circle (at 7 -2.5) (size 1.8 1.8) (drill 1) (layers "*.Cu" "*.Mask") (zone_connect 2) (net 1 "GND")) (pad "" np_thru_hole circle (at -5.6 0) (size 2.6 2.6) (drill 2.6) (layers "*.Cu" "*.Mask")) (pad "" np_thru_hole circle (at 5.6 0) (size 2.6 2.6) (drill 2.6) (layers "*.Cu" "*.Mask")) (fp_rect (start -6 -6) (end 6 6) (stroke (width 0.2) (type default)) (fill none) (layer "F.CrtYd")) ) (footprint "OpenMicro:DF40C-24DS-0.4V_24" (layer "B.Cu") (at 76.575 19.425) (property "Reference" "JTOP" (at 0 -3 0) (layer "B.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "DF40C-24DS-0.4V(51)" (at 0 3 0) (layer "B.Fab") (effects (font (size 0.7 0.7)) (justify mirror))) (property "LCSC Part #" "GLOBAL" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (property "Assembly" "SMT" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (attr smd) (fp_rect (start -3 -1.8) (end 3 1.8) (stroke (width 0.12) (type default)) (fill none) (layer "B.Fab")) (pad "1" smd roundrect (at -2.2 -1.15) (size 0.25 0.8) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (zone_connect 2) (net 1 "GND")) (pad "2" smd roundrect (at -1.8 -1.15) (size 0.25 0.8) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 54 "MX11")) (pad "3" smd roundrect (at -1.4 -1.15) (size 0.25 0.8) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 9 "5V_LED")) (pad "4" smd roundrect (at -1 -1.15) (size 0.25 0.8) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 9 "5V_LED")) (pad "5" smd roundrect (at -0.6 -1.15) (size 0.25 0.8) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2)) (pad "6" smd roundrect (at -0.2 -1.15) (size 0.25 0.8) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 44 "MX1")) (pad "7" smd roundrect (at 0.2 -1.15) (size 0.25 0.8) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 45 "MX2")) (pad "8" smd roundrect (at 0.6 -1.15) (size 0.25 0.8) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 46 "MX3")) (pad "9" smd roundrect (at 1 -1.15) (size 0.25 0.8) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 47 "MX4")) (pad "10" smd roundrect (at 1.4 -1.15) (size 0.25 0.8) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 48 "MX5")) (pad "11" smd roundrect (at 1.8 -1.15) (size 0.25 0.8) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 49 "MX6")) (pad "12" smd roundrect (at 2.2 -1.15) (size 0.25 0.8) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 50 "MX7")) (pad "13" smd roundrect (at 2.2 1.15) (size 0.25 0.8) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 51 "MX8")) (pad "14" smd roundrect (at 1.8 1.15) (size 0.25 0.8) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 52 "MX9")) (pad "15" smd roundrect (at 1.4 1.15) (size 0.25 0.8) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 53 "MX10")) (pad "16" smd roundrect (at 1 1.15) (size 0.25 0.8) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (zone_connect 2) (net 1 "GND")) (pad "17" smd roundrect (at 0.6 1.15) (size 0.25 0.8) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 55 "MX12")) (pad "18" smd roundrect (at 0.2 1.15) (size 0.25 0.8) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 24 "RGB_DATA")) (pad "19" smd roundrect (at -0.2 1.15) (size 0.25 0.8) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 39 "TOUCH_OUT")) (pad "20" smd roundrect (at -0.6 1.15) (size 0.25 0.8) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 41 "ENC_A")) (pad "21" smd roundrect (at -1 1.15) (size 0.25 0.8) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 42 "ENC_B")) (pad "22" smd roundrect (at -1.4 1.15) (size 0.25 0.8) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 43 "ENC_PRESS")) (pad "23" smd roundrect (at -1.8 1.15) (size 0.25 0.8) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 25 "RGB_RETURN")) (pad "24" smd roundrect (at -2.2 1.15) (size 0.25 0.8) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 7 "VDD")) (fp_rect (start -3 -1.8) (end 3 1.8) (stroke (width 0.12) (type default)) (fill none) (layer "B.CrtYd")) ) (footprint "OpenMicro:SK6812MINI-E_ReverseMount" (layer "B.Cu") (at 19.425 76.575) (property "Reference" "D13" (at 0 -3 0) (layer "B.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "SK6812MINI-E" (at 0 3 0) (layer "B.Fab") (effects (font (size 0.7 0.7)) (justify mirror))) (property "LCSC Part #" "C5149201" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (property "Assembly" "SMT" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (attr smd) (fp_rect (start -1.8 -1.6) (end 1.8 1.6) (stroke (width 0.15) (type default)) (fill none) (layer "B.Fab")) (fp_rect (start -1.6 -1.4) (end 1.6 1.4) (stroke (width 0.12) (type default)) (fill none) (layer "Edge.Cuts")) (pad "1" smd roundrect (at -2.725 0.75) (size 1.35 0.82) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 9 "5V_LED")) (pad "2" smd roundrect (at -2.725 -0.75) (size 1.35 0.82) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 25 "RGB_RETURN")) (pad "3" smd roundrect (at 2.725 -0.75) (size 1.35 0.82) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (zone_connect 2) (net 1 "GND")) (pad "4" smd roundrect (at 2.725 0.75) (size 1.35 0.82) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 67 "RGB_CHAIN12")) (fp_rect (start -1.8 -1.6) (end 1.8 1.6) (stroke (width 0.05) (type default)) (fill none) (layer "B.CrtYd")) ) (footprint "OpenMicro:Touch_Ring_14mm" (layer "F.Cu") (at 19.425 76.575) (property "Reference" "J4" (at 0 -3 0) (layer "F.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "CAP_TOUCH_RING" (at 0 3 0) (layer "F.Fab") (effects (font (size 0.7 0.7)))) (property "LCSC Part #" "DNP" (at 0 0 0) (layer "F.Fab") (hide yes) (effects (font (size 0.5 0.5)))) (property "Assembly" "DNP" (at 0 0 0) (layer "F.Fab") (hide yes) (effects (font (size 0.5 0.5)))) (attr exclude_from_pos_files exclude_from_bom) (fp_circle (center 0 0) (end 7 0) (stroke (width 0.2) (type default)) (fill none) (layer "F.Fab")) (pad "1" smd roundrect (at 5.5 0 90) (size 2.4 1.8) (layers "F.Cu" "F.Mask") (roundrect_rratio 0.2) (net 39 "TOUCH_OUT")) (pad "1" smd roundrect (at 4.763 2.75 120) (size 2.4 1.8) (layers "F.Cu" "F.Mask") (roundrect_rratio 0.2) (net 39 "TOUCH_OUT")) (pad "1" smd roundrect (at 2.75 4.763 150) (size 2.4 1.8) (layers "F.Cu" "F.Mask") (roundrect_rratio 0.2) (net 39 "TOUCH_OUT")) (pad "1" smd roundrect (at 0 5.5 180) (size 2.4 1.8) (layers "F.Cu" "F.Mask") (roundrect_rratio 0.2) (net 39 "TOUCH_OUT")) (pad "1" smd roundrect (at -2.75 4.763 210) (size 2.4 1.8) (layers "F.Cu" "F.Mask") (roundrect_rratio 0.2) (net 39 "TOUCH_OUT")) (pad "1" smd roundrect (at -2.75 -4.763 330) (size 2.4 1.8) (layers "F.Cu" "F.Mask") (roundrect_rratio 0.2) (net 39 "TOUCH_OUT")) (pad "1" smd roundrect (at -0 -5.5) (size 2.4 1.8) (layers "F.Cu" "F.Mask") (roundrect_rratio 0.2) (net 39 "TOUCH_OUT")) (pad "1" smd roundrect (at 2.75 -4.763 30) (size 2.4 1.8) (layers "F.Cu" "F.Mask") (roundrect_rratio 0.2) (net 39 "TOUCH_OUT")) (pad "1" smd roundrect (at 4.763 -2.75 60) (size 2.4 1.8) (layers "F.Cu" "F.Mask") (roundrect_rratio 0.2) (net 39 "TOUCH_OUT")) ) (footprint "Capacitor_SMD:C_0402_1005Metric" (layer "B.Cu") (at 31 26) (property "Reference" "C21" (at 0 -3 0) (layer "B.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "100nF" (at 0 3 0) (layer "B.Fab") (effects (font (size 0.7 0.7)) (justify mirror))) (property "LCSC Part #" "C1525" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (property "Assembly" "SMT" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (attr smd) (fp_rect (start -1.2 -0.6) (end 1.2 0.6) (stroke (width 0.15) (type default)) (fill none) (layer "B.Fab")) (pad "1" smd roundrect (at -0.5 0) (size 0.6 0.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 9 "5V_LED")) (pad "2" smd roundrect (at 0.5 0) (size 0.6 0.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (zone_connect 2) (net 1 "GND")) (fp_rect (start -1.2 -0.6) (end 1.2 0.6) (stroke (width 0.05) (type default)) (fill none) (layer "B.CrtYd")) ) (footprint "Capacitor_SMD:C_0402_1005Metric" (layer "B.Cu") (at 50 26) (property "Reference" "C22" (at 0 -3 0) (layer "B.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "100nF" (at 0 3 0) (layer "B.Fab") (effects (font (size 0.7 0.7)) (justify mirror))) (property "LCSC Part #" "C1525" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (property "Assembly" "SMT" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (attr smd) (fp_rect (start -1.2 -0.6) (end 1.2 0.6) (stroke (width 0.15) (type default)) (fill none) (layer "B.Fab")) (pad "1" smd roundrect (at -0.5 0) (size 0.6 0.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 9 "5V_LED")) (pad "2" smd roundrect (at 0.5 0) (size 0.6 0.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (zone_connect 2) (net 1 "GND")) (fp_rect (start -1.2 -0.6) (end 1.2 0.6) (stroke (width 0.05) (type default)) (fill none) (layer "B.CrtYd")) ) (footprint "Capacitor_SMD:C_0402_1005Metric" (layer "B.Cu") (at 12 45) (property "Reference" "C23" (at 0 -3 0) (layer "B.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "100nF" (at 0 3 0) (layer "B.Fab") (effects (font (size 0.7 0.7)) (justify mirror))) (property "LCSC Part #" "C1525" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (property "Assembly" "SMT" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (attr smd) (fp_rect (start -1.2 -0.6) (end 1.2 0.6) (stroke (width 0.15) (type default)) (fill none) (layer "B.Fab")) (pad "1" smd roundrect (at -0.5 0) (size 0.6 0.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 9 "5V_LED")) (pad "2" smd roundrect (at 0.5 0) (size 0.6 0.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (zone_connect 2) (net 1 "GND")) (fp_rect (start -1.2 -0.6) (end 1.2 0.6) (stroke (width 0.05) (type default)) (fill none) (layer "B.CrtYd")) ) (footprint "Capacitor_SMD:C_0402_1005Metric" (layer "B.Cu") (at 31 45) (property "Reference" "C24" (at 0 -3 0) (layer "B.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "100nF" (at 0 3 0) (layer "B.Fab") (effects (font (size 0.7 0.7)) (justify mirror))) (property "LCSC Part #" "C1525" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (property "Assembly" "SMT" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (attr smd) (fp_rect (start -1.2 -0.6) (end 1.2 0.6) (stroke (width 0.15) (type default)) (fill none) (layer "B.Fab")) (pad "1" smd roundrect (at -0.5 0) (size 0.6 0.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 9 "5V_LED")) (pad "2" smd roundrect (at 0.5 0) (size 0.6 0.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (zone_connect 2) (net 1 "GND")) (fp_rect (start -1.2 -0.6) (end 1.2 0.6) (stroke (width 0.05) (type default)) (fill none) (layer "B.CrtYd")) ) (footprint "Capacitor_SMD:C_0402_1005Metric" (layer "B.Cu") (at 50 45) (property "Reference" "C25" (at 0 -3 0) (layer "B.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "100nF" (at 0 3 0) (layer "B.Fab") (effects (font (size 0.7 0.7)) (justify mirror))) (property "LCSC Part #" "C1525" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (property "Assembly" "SMT" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (attr smd) (fp_rect (start -1.2 -0.6) (end 1.2 0.6) (stroke (width 0.15) (type default)) (fill none) (layer "B.Fab")) (pad "1" smd roundrect (at -0.5 0) (size 0.6 0.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 9 "5V_LED")) (pad "2" smd roundrect (at 0.5 0) (size 0.6 0.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (zone_connect 2) (net 1 "GND")) (fp_rect (start -1.2 -0.6) (end 1.2 0.6) (stroke (width 0.05) (type default)) (fill none) (layer "B.CrtYd")) ) (footprint "Capacitor_SMD:C_0402_1005Metric" (layer "B.Cu") (at 72 40) (property "Reference" "C26" (at 0 -3 0) (layer "B.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "100nF" (at 0 3 0) (layer "B.Fab") (effects (font (size 0.7 0.7)) (justify mirror))) (property "LCSC Part #" "C1525" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (property "Assembly" "SMT" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (attr smd) (fp_rect (start -1.2 -0.6) (end 1.2 0.6) (stroke (width 0.15) (type default)) (fill none) (layer "B.Fab")) (pad "1" smd roundrect (at -0.5 0) (size 0.6 0.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 9 "5V_LED")) (pad "2" smd roundrect (at 0.5 0) (size 0.6 0.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (zone_connect 2) (net 1 "GND")) (fp_rect (start -1.2 -0.6) (end 1.2 0.6) (stroke (width 0.05) (type default)) (fill none) (layer "B.CrtYd")) ) (footprint "Capacitor_SMD:C_0402_1005Metric" (layer "B.Cu") (at 12 64) (property "Reference" "C27" (at 0 -3 0) (layer "B.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "100nF" (at 0 3 0) (layer "B.Fab") (effects (font (size 0.7 0.7)) (justify mirror))) (property "LCSC Part #" "C1525" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (property "Assembly" "SMT" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (attr smd) (fp_rect (start -1.2 -0.6) (end 1.2 0.6) (stroke (width 0.15) (type default)) (fill none) (layer "B.Fab")) (pad "1" smd roundrect (at -0.5 0) (size 0.6 0.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 9 "5V_LED")) (pad "2" smd roundrect (at 0.5 0) (size 0.6 0.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (zone_connect 2) (net 1 "GND")) (fp_rect (start -1.2 -0.6) (end 1.2 0.6) (stroke (width 0.05) (type default)) (fill none) (layer "B.CrtYd")) ) (footprint "Capacitor_SMD:C_0402_1005Metric" (layer "B.Cu") (at 31 64) (property "Reference" "C28" (at 0 -3 0) (layer "B.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "100nF" (at 0 3 0) (layer "B.Fab") (effects (font (size 0.7 0.7)) (justify mirror))) (property "LCSC Part #" "C1525" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (property "Assembly" "SMT" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (attr smd) (fp_rect (start -1.2 -0.6) (end 1.2 0.6) (stroke (width 0.15) (type default)) (fill none) (layer "B.Fab")) (pad "1" smd roundrect (at -0.5 0) (size 0.6 0.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 9 "5V_LED")) (pad "2" smd roundrect (at 0.5 0) (size 0.6 0.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (zone_connect 2) (net 1 "GND")) (fp_rect (start -1.2 -0.6) (end 1.2 0.6) (stroke (width 0.05) (type default)) (fill none) (layer "B.CrtYd")) ) (footprint "Capacitor_SMD:C_0402_1005Metric" (layer "B.Cu") (at 50 64) (property "Reference" "C29" (at 0 -3 0) (layer "B.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "100nF" (at 0 3 0) (layer "B.Fab") (effects (font (size 0.7 0.7)) (justify mirror))) (property "LCSC Part #" "C1525" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (property "Assembly" "SMT" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (attr smd) (fp_rect (start -1.2 -0.6) (end 1.2 0.6) (stroke (width 0.15) (type default)) (fill none) (layer "B.Fab")) (pad "1" smd roundrect (at -0.5 0) (size 0.6 0.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 9 "5V_LED")) (pad "2" smd roundrect (at 0.5 0) (size 0.6 0.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (zone_connect 2) (net 1 "GND")) (fp_rect (start -1.2 -0.6) (end 1.2 0.6) (stroke (width 0.05) (type default)) (fill none) (layer "B.CrtYd")) ) (footprint "Capacitor_SMD:C_0402_1005Metric" (layer "B.Cu") (at 69 64) (property "Reference" "C30" (at 0 -3 0) (layer "B.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "100nF" (at 0 3 0) (layer "B.Fab") (effects (font (size 0.7 0.7)) (justify mirror))) (property "LCSC Part #" "C1525" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (property "Assembly" "SMT" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (attr smd) (fp_rect (start -1.2 -0.6) (end 1.2 0.6) (stroke (width 0.15) (type default)) (fill none) (layer "B.Fab")) (pad "1" smd roundrect (at -0.5 0) (size 0.6 0.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 9 "5V_LED")) (pad "2" smd roundrect (at 0.5 0) (size 0.6 0.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (zone_connect 2) (net 1 "GND")) (fp_rect (start -1.2 -0.6) (end 1.2 0.6) (stroke (width 0.05) (type default)) (fill none) (layer "B.CrtYd")) ) (footprint "Capacitor_SMD:C_0402_1005Metric" (layer "B.Cu") (at 40 70) (property "Reference" "C32" (at 0 -3 0) (layer "B.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "100nF" (at 0 3 0) (layer "B.Fab") (effects (font (size 0.7 0.7)) (justify mirror))) (property "LCSC Part #" "C1525" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (property "Assembly" "SMT" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (attr smd) (fp_rect (start -1.2 -0.6) (end 1.2 0.6) (stroke (width 0.15) (type default)) (fill none) (layer "B.Fab")) (pad "1" smd roundrect (at -0.5 0) (size 0.6 0.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 9 "5V_LED")) (pad "2" smd roundrect (at 0.5 0) (size 0.6 0.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (zone_connect 2) (net 1 "GND")) (fp_rect (start -1.2 -0.6) (end 1.2 0.6) (stroke (width 0.05) (type default)) (fill none) (layer "B.CrtYd")) ) (footprint "Capacitor_SMD:C_0402_1005Metric" (layer "B.Cu") (at 69 70) (property "Reference" "C33" (at 0 -3 0) (layer "B.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "100nF" (at 0 3 0) (layer "B.Fab") (effects (font (size 0.7 0.7)) (justify mirror))) (property "LCSC Part #" "C1525" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (property "Assembly" "SMT" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (attr smd) (fp_rect (start -1.2 -0.6) (end 1.2 0.6) (stroke (width 0.15) (type default)) (fill none) (layer "B.Fab")) (pad "1" smd roundrect (at -0.5 0) (size 0.6 0.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 9 "5V_LED")) (pad "2" smd roundrect (at 0.5 0) (size 0.6 0.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (zone_connect 2) (net 1 "GND")) (fp_rect (start -1.2 -0.6) (end 1.2 0.6) (stroke (width 0.05) (type default)) (fill none) (layer "B.CrtYd")) ) (footprint "Capacitor_SMD:C_0402_1005Metric" (layer "B.Cu") (at 9 83) (property "Reference" "C44" (at 0 -3 0) (layer "B.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "100nF" (at 0 3 0) (layer "B.Fab") (effects (font (size 0.7 0.7)) (justify mirror))) (property "LCSC Part #" "C1525" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (property "Assembly" "SMT" (at 0 0 0) (layer "B.Fab") (hide yes) (effects (font (size 0.5 0.5)) (justify mirror))) (attr smd) (fp_rect (start -1.2 -0.6) (end 1.2 0.6) (stroke (width 0.15) (type default)) (fill none) (layer "B.Fab")) (pad "1" smd roundrect (at -0.5 0) (size 0.6 0.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (net 9 "5V_LED")) (pad "2" smd roundrect (at 0.5 0) (size 0.6 0.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.2) (zone_connect 2) (net 1 "GND")) (fp_rect (start -1.2 -0.6) (end 1.2 0.6) (stroke (width 0.05) (type default)) (fill none) (layer "B.CrtYd")) ) (footprint "TestPoint:TestPoint_Pad_D1.0mm" (layer "F.Cu") (at 30 12) (property "Reference" "TP_TOP1" (at 0 -3 0) (layer "F.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "5V_LED" (at 0 3 0) (layer "F.Fab") (effects (font (size 0.7 0.7)))) (property "LCSC Part #" "DNP" (at 0 0 0) (layer "F.Fab") (hide yes) (effects (font (size 0.5 0.5)))) (property "Assembly" "DNP" (at 0 0 0) (layer "F.Fab") (hide yes) (effects (font (size 0.5 0.5)))) (attr exclude_from_pos_files exclude_from_bom) (fp_rect (start -0.7 -0.7) (end 0.7 0.7) (stroke (width 0.15) (type default)) (fill none) (layer "F.Fab")) (pad "1" smd circle (at 0 0) (size 1 1) (layers "F.Cu" "F.Mask") (net 9 "5V_LED")) (fp_rect (start -0.7 -0.7) (end 0.7 0.7) (stroke (width 0.05) (type default)) (fill none) (layer "F.CrtYd")) ) (footprint "TestPoint:TestPoint_Pad_D1.0mm" (layer "F.Cu") (at 34 12) (property "Reference" "TP_TOP2" (at 0 -3 0) (layer "F.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "GND" (at 0 3 0) (layer "F.Fab") (effects (font (size 0.7 0.7)))) (property "LCSC Part #" "DNP" (at 0 0 0) (layer "F.Fab") (hide yes) (effects (font (size 0.5 0.5)))) (property "Assembly" "DNP" (at 0 0 0) (layer "F.Fab") (hide yes) (effects (font (size 0.5 0.5)))) (attr exclude_from_pos_files exclude_from_bom) (fp_rect (start -0.7 -0.7) (end 0.7 0.7) (stroke (width 0.15) (type default)) (fill none) (layer "F.Fab")) (pad "1" smd circle (at 0 0) (size 1 1) (layers "F.Cu" "F.Mask") (zone_connect 2) (net 1 "GND")) (fp_rect (start -0.7 -0.7) (end 0.7 0.7) (stroke (width 0.05) (type default)) (fill none) (layer "F.CrtYd")) ) (footprint "TestPoint:TestPoint_Pad_D1.0mm" (layer "F.Cu") (at 38 12) (property "Reference" "TP_TOP3" (at 0 -3 0) (layer "F.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "RGB_DATA" (at 0 3 0) (layer "F.Fab") (effects (font (size 0.7 0.7)))) (property "LCSC Part #" "DNP" (at 0 0 0) (layer "F.Fab") (hide yes) (effects (font (size 0.5 0.5)))) (property "Assembly" "DNP" (at 0 0 0) (layer "F.Fab") (hide yes) (effects (font (size 0.5 0.5)))) (attr exclude_from_pos_files exclude_from_bom) (fp_rect (start -0.7 -0.7) (end 0.7 0.7) (stroke (width 0.15) (type default)) (fill none) (layer "F.Fab")) (pad "1" smd circle (at 0 0) (size 1 1) (layers "F.Cu" "F.Mask") (net 24 "RGB_DATA")) (fp_rect (start -0.7 -0.7) (end 0.7 0.7) (stroke (width 0.05) (type default)) (fill none) (layer "F.CrtYd")) ) (footprint "TestPoint:TestPoint_Pad_D1.0mm" (layer "F.Cu") (at 42 12) (property "Reference" "TP_TOP4" (at 0 -3 0) (layer "F.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "RGB_RETURN" (at 0 3 0) (layer "F.Fab") (effects (font (size 0.7 0.7)))) (property "LCSC Part #" "DNP" (at 0 0 0) (layer "F.Fab") (hide yes) (effects (font (size 0.5 0.5)))) (property "Assembly" "DNP" (at 0 0 0) (layer "F.Fab") (hide yes) (effects (font (size 0.5 0.5)))) (attr exclude_from_pos_files exclude_from_bom) (fp_rect (start -0.7 -0.7) (end 0.7 0.7) (stroke (width 0.15) (type default)) (fill none) (layer "F.Fab")) (pad "1" smd circle (at 0 0) (size 1 1) (layers "F.Cu" "F.Mask") (net 25 "RGB_RETURN")) (fp_rect (start -0.7 -0.7) (end 0.7 0.7) (stroke (width 0.05) (type default)) (fill none) (layer "F.CrtYd")) ) (footprint "TestPoint:TestPoint_Pad_D1.0mm" (layer "F.Cu") (at 46 12) (property "Reference" "TP_TOP5" (at 0 -3 0) (layer "F.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "MX_GROUP" (at 0 3 0) (layer "F.Fab") (effects (font (size 0.7 0.7)))) (property "LCSC Part #" "DNP" (at 0 0 0) (layer "F.Fab") (hide yes) (effects (font (size 0.5 0.5)))) (property "Assembly" "DNP" (at 0 0 0) (layer "F.Fab") (hide yes) (effects (font (size 0.5 0.5)))) (attr exclude_from_pos_files exclude_from_bom) (fp_rect (start -0.7 -0.7) (end 0.7 0.7) (stroke (width 0.15) (type default)) (fill none) (layer "F.Fab")) (pad "1" smd circle (at 0 0) (size 1 1) (layers "F.Cu" "F.Mask") (net 44 "MX1")) (fp_rect (start -0.7 -0.7) (end 0.7 0.7) (stroke (width 0.05) (type default)) (fill none) (layer "F.CrtYd")) ) (footprint "TestPoint:TestPoint_Pad_D1.0mm" (layer "F.Cu") (at 50 12) (property "Reference" "TP_TOP6" (at 0 -3 0) (layer "F.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "ENCODER_GROUP" (at 0 3 0) (layer "F.Fab") (effects (font (size 0.7 0.7)))) (property "LCSC Part #" "DNP" (at 0 0 0) (layer "F.Fab") (hide yes) (effects (font (size 0.5 0.5)))) (property "Assembly" "DNP" (at 0 0 0) (layer "F.Fab") (hide yes) (effects (font (size 0.5 0.5)))) (attr exclude_from_pos_files exclude_from_bom) (fp_rect (start -0.7 -0.7) (end 0.7 0.7) (stroke (width 0.15) (type default)) (fill none) (layer "F.Fab")) (pad "1" smd circle (at 0 0) (size 1 1) (layers "F.Cu" "F.Mask") (net 41 "ENC_A")) (fp_rect (start -0.7 -0.7) (end 0.7 0.7) (stroke (width 0.05) (type default)) (fill none) (layer "F.CrtYd")) ) (footprint "TestPoint:TestPoint_Pad_D1.0mm" (layer "F.Cu") (at 54 12) (property "Reference" "TP_TOP7" (at 0 -3 0) (layer "F.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "TOUCH_OUT" (at 0 3 0) (layer "F.Fab") (effects (font (size 0.7 0.7)))) (property "LCSC Part #" "DNP" (at 0 0 0) (layer "F.Fab") (hide yes) (effects (font (size 0.5 0.5)))) (property "Assembly" "DNP" (at 0 0 0) (layer "F.Fab") (hide yes) (effects (font (size 0.5 0.5)))) (attr exclude_from_pos_files exclude_from_bom) (fp_rect (start -0.7 -0.7) (end 0.7 0.7) (stroke (width 0.15) (type default)) (fill none) (layer "F.Fab")) (pad "1" smd circle (at 0 0) (size 1 1) (layers "F.Cu" "F.Mask") (net 39 "TOUCH_OUT")) (fp_rect (start -0.7 -0.7) (end 0.7 0.7) (stroke (width 0.05) (type default)) (fill none) (layer "F.CrtYd")) ) (segment (start 75.175 18.275) (end 75.575 18.275) (width 0.2) (layer "B.Cu") (net 9)) (segment (start 38 12) (end 39.5402 10.4598) (width 0.2) (layer "F.Cu") (net 24)) (segment (start 78.3357 16.8608) (end 78.3357 20.248) (width 0.2) (layer "F.Cu") (net 24)) (segment (start 39.5402 10.4598) (end 71.9347 10.4598) (width 0.2) (layer "F.Cu") (net 24)) (segment (start 71.9347 10.4598) (end 78.3357 16.8608) (width 0.2) (layer "F.Cu") (net 24)) (segment (start 35.9793 21.1963) (end 36.0497 21.2667) (width 0.2) (layer "F.Cu") (net 24)) (segment (start 38 16.3706) (end 35.9793 18.3913) (width 0.2) (layer "F.Cu") (net 24)) (segment (start 78.3357 20.248) (end 76.5867 21.997) (width 0.2) (layer "F.Cu") (net 24)) (segment (start 35.9793 18.3913) (end 35.9793 21.1963) (width 0.2) (layer "F.Cu") (net 24)) (segment (start 38 12) (end 38 16.3706) (width 0.2) (layer "F.Cu") (net 24)) (segment (start 40.2238 27.3347) (end 41.2 26.3585) (width 0.2) (layer "B.Cu") (net 24)) (segment (start 36.0497 21.2667) (end 34.8215 22.4949) (width 0.2) (layer "B.Cu") (net 24)) (segment (start 34.8215 22.4949) (end 34.8215 26.705) (width 0.2) (layer "B.Cu") (net 24)) (segment (start 35.4512 27.3347) (end 40.2238 27.3347) (width 0.2) (layer "B.Cu") (net 24)) (segment (start 76.775 21.8087) (end 76.775 20.575) (width 0.2) (layer "B.Cu") (net 24)) (segment (start 76.5867 21.997) (end 76.775 21.8087) (width 0.2) (layer "B.Cu") (net 24)) (segment (start 34.8215 26.705) (end 35.4512 27.3347) (width 0.2) (layer "B.Cu") (net 24)) (segment (start 41.2 26.3585) (end 41.2 26.275) (width 0.2) (layer "B.Cu") (net 24)) (segment (start 42.7842 11.2158) (end 66.0897 11.2158) (width 0.2) (layer "F.Cu") (net 25)) (segment (start 66.0897 11.2158) (end 68.9996 14.1257) (width 0.2) (layer "F.Cu") (net 25)) (segment (start 42 12) (end 42.7842 11.2158) (width 0.2) (layer "F.Cu") (net 25)) (segment (start 68.9996 14.1257) (end 68.9996 16.2124) (width 0.2) (layer "B.Cu") (net 25)) (segment (start 68.9996 16.2124) (end 74.0501 21.2629) (width 0.2) (layer "B.Cu") (net 25)) (segment (start 74.0501 21.2629) (end 74.6031 21.2629) (width 0.2) (layer "B.Cu") (net 25)) (segment (start 74.6031 21.2629) (end 74.775 21.091) (width 0.2) (layer "B.Cu") (net 25)) (segment (start 74.775 21.091) (end 74.775 20.575) (width 0.2) (layer "B.Cu") (net 25)) (segment (start 59.1542 12) (end 66.1206 18.9664) (width 0.2) (layer "F.Cu") (net 39)) (segment (start 18.688 81.338) (end 19.425 82.075) (width 0.2) (layer "F.Cu") (net 39)) (segment (start 51.0698 47.471) (end 51.0698 52.0074) (width 0.2) (layer "F.Cu") (net 39)) (segment (start 24.925 74.562) (end 24.925 76.575) (width 0.2) (layer "F.Cu") (net 39)) (segment (start 17.412 71.075) (end 16.675 71.812) (width 0.2) (layer "F.Cu") (net 39)) (segment (start 16.675 81.338) (end 18.688 81.338) (width 0.2) (layer "F.Cu") (net 39)) (segment (start 20.162 71.812) (end 19.425 71.075) (width 0.2) (layer "F.Cu") (net 39)) (segment (start 42.1357 60.9415) (end 33.0455 60.9415) (width 0.2) (layer "F.Cu") (net 39)) (segment (start 24.188 73.825) (end 24.925 74.562) (width 0.2) (layer "F.Cu") (net 39)) (segment (start 21.438 82.075) (end 22.175 81.338) (width 0.2) (layer "F.Cu") (net 39)) (segment (start 58.2028 41.897) (end 56.6438 41.897) (width 0.2) (layer "F.Cu") (net 39)) (segment (start 59.6616 41.897) (end 59.3099 41.5453) (width 0.2) (layer "F.Cu") (net 39)) (segment (start 24.188 73.825) (end 22.175 71.812) (width 0.2) (layer "F.Cu") (net 39)) (segment (start 58.2028 41.8969) (end 58.2028 41.897) (width 0.2) (layer "F.Cu") (net 39)) (segment (start 33.0455 60.9415) (end 22.175 71.812) (width 0.2) (layer "F.Cu") (net 39)) (segment (start 24.925 78.588) (end 24.925 76.575) (width 0.2) (layer "F.Cu") (net 39)) (segment (start 56.6438 41.897) (end 51.0698 47.471) (width 0.2) (layer "F.Cu") (net 39)) (segment (start 19.425 82.075) (end 21.438 82.075) (width 0.2) (layer "F.Cu") (net 39)) (segment (start 19.425 71.075) (end 17.412 71.075) (width 0.2) (layer "F.Cu") (net 39)) (segment (start 22.175 71.812) (end 20.162 71.812) (width 0.2) (layer "F.Cu") (net 39)) (segment (start 66.1206 21.4826) (end 66.1207 21.4826) (width 0.2) (layer "F.Cu") (net 39)) (segment (start 22.175 81.338) (end 24.188 79.325) (width 0.2) (layer "F.Cu") (net 39)) (segment (start 51.0698 52.0074) (end 42.1357 60.9415) (width 0.2) (layer "F.Cu") (net 39)) (segment (start 24.188 79.325) (end 24.925 78.588) (width 0.2) (layer "F.Cu") (net 39)) (segment (start 58.5544 41.5453) (end 58.2028 41.8969) (width 0.2) (layer "F.Cu") (net 39)) (segment (start 59.3099 41.5453) (end 58.5544 41.5453) (width 0.2) (layer "F.Cu") (net 39)) (segment (start 66.1206 18.9664) (end 66.1206 21.4826) (width 0.2) (layer "F.Cu") (net 39)) (segment (start 54 12) (end 59.1542 12) (width 0.2) (layer "F.Cu") (net 39)) (segment (start 69.1331 24.4972) (end 72.9436 24.4972) (width 0.2) (layer "B.Cu") (net 39)) (segment (start 67.3074 36.1798) (end 61.5902 41.897) (width 0.2) (layer "B.Cu") (net 39)) (segment (start 76.375 21.0658) (end 76.375 20.575) (width 0.2) (layer "B.Cu") (net 39)) (segment (start 61.5902 41.897) (end 59.6616 41.897) (width 0.2) (layer "B.Cu") (net 39)) (segment (start 69.1331 24.4972) (end 67.3074 26.3229) (width 0.2) (layer "B.Cu") (net 39)) (segment (start 66.1207 21.4848) (end 66.1207 21.4826) (width 0.2) (layer "B.Cu") (net 39)) (segment (start 67.3074 26.3229) (end 67.3074 36.1798) (width 0.2) (layer "B.Cu") (net 39)) (segment (start 69.1331 24.4972) (end 66.1207 21.4848) (width 0.2) (layer "B.Cu") (net 39)) (segment (start 72.9436 24.4972) (end 76.375 21.0658) (width 0.2) (layer "B.Cu") (net 39)) (segment (start 53.0806 22.0709) (end 47.981 16.9713) (width 0.2) (layer "F.Cu") (net 41)) (segment (start 21.8996 21.9504) (end 43.0019 21.9504) (width 0.2) (layer "F.Cu") (net 41)) (segment (start 50 14.9523) (end 50 12) (width 0.2) (layer "F.Cu") (net 41)) (segment (start 16.925 26.925) (end 21.8996 21.9504) (width 0.2) (layer "F.Cu") (net 41)) (segment (start 71.2251 19.3184) (end 68.4726 22.0709) (width 0.2) (layer "F.Cu") (net 41)) (segment (start 75.5431 19.3184) (end 71.2251 19.3184) (width 0.2) (layer "F.Cu") (net 41)) (segment (start 47.981 16.9713) (end 50 14.9523) (width 0.2) (layer "F.Cu") (net 41)) (segment (start 43.0019 21.9504) (end 47.981 16.9713) (width 0.2) (layer "F.Cu") (net 41)) (segment (start 68.4726 22.0709) (end 53.0806 22.0709) (width 0.2) (layer "F.Cu") (net 41)) (segment (start 75.5602 19.3355) (end 75.5431 19.3184) (width 0.2) (layer "F.Cu") (net 41)) (segment (start 75.5602 19.3355) (end 75.975 19.7503) (width 0.2) (layer "B.Cu") (net 41)) (segment (start 75.975 19.7503) (end 75.975 20.575) (width 0.2) (layer "B.Cu") (net 41)) (segment (start 70.5534 22.4596) (end 26.3904 22.4596) (width 0.2) (layer "F.Cu") (net 42)) (segment (start 71.2912 21.7218) (end 70.5534 22.4596) (width 0.2) (layer "F.Cu") (net 42)) (segment (start 26.3904 22.4596) (end 21.925 26.925) (width 0.2) (layer "F.Cu") (net 42)) (segment (start 74.9516 21.7218) (end 71.2912 21.7218) (width 0.2) (layer "B.Cu") (net 42)) (segment (start 75.575 20.575) (end 75.575 21.0984) (width 0.2) (layer "B.Cu") (net 42)) (segment (start 75.575 21.0984) (end 74.9516 21.7218) (width 0.2) (layer "B.Cu") (net 42)) (segment (start 70.0805 23.7733) (end 73.5149 20.3389) (width 0.2) (layer "F.Cu") (net 43)) (segment (start 34.9636 23.7733) (end 70.0805 23.7733) (width 0.2) (layer "F.Cu") (net 43)) (segment (start 16.4103 28.11) (end 30.6269 28.11) (width 0.2) (layer "F.Cu") (net 43)) (segment (start 12.425 16.925) (end 12.0191 17.3309) (width 0.2) (layer "F.Cu") (net 43)) (segment (start 12.0191 17.3309) (end 12.0191 23.7188) (width 0.2) (layer "F.Cu") (net 43)) (segment (start 12.0191 23.7188) (end 16.4103 28.11) (width 0.2) (layer "F.Cu") (net 43)) (segment (start 73.5149 20.3389) (end 73.5149 19.8701) (width 0.2) (layer "F.Cu") (net 43)) (segment (start 30.6269 28.11) (end 34.9636 23.7733) (width 0.2) (layer "F.Cu") (net 43)) (segment (start 73.5149 19.8701) (end 74.9848 19.8701) (width 0.2) (layer "B.Cu") (net 43)) (segment (start 75.175 20.0603) (end 75.175 20.575) (width 0.2) (layer "B.Cu") (net 43)) (segment (start 74.9848 19.8701) (end 75.175 20.0603) (width 0.2) (layer "B.Cu") (net 43)) (segment (start 42.285 15.715) (end 42.285 16.885) (width 0.2) (layer "F.Cu") (net 44)) (segment (start 42.097 10.8302) (end 41.2153 11.7119) (width 0.2) (layer "F.Cu") (net 44)) (segment (start 46 12) (end 43.4544 14.5456) (width 0.2) (layer "F.Cu") (net 44)) (segment (start 41.2153 12.3065) (end 43.4544 14.5456) (width 0.2) (layer "F.Cu") (net 44)) (segment (start 41.2153 11.7119) (end 41.2153 12.3065) (width 0.2) (layer "F.Cu") (net 44)) (segment (start 76.0096 16.8225) (end 70.0173 10.8302) (width 0.2) (layer "F.Cu") (net 44)) (segment (start 43.4544 14.5456) (end 42.285 15.715) (width 0.2) (layer "F.Cu") (net 44)) (segment (start 70.0173 10.8302) (end 42.097 10.8302) (width 0.2) (layer "F.Cu") (net 44)) (segment (start 76.375 18.275) (end 76.375 17.1879) (width 0.2) (layer "B.Cu") (net 44)) (segment (start 44.11 16.885) (end 42.285 16.885) (width 0.2) (layer "B.Cu") (net 44)) (segment (start 45.835 16.885) (end 44.11 16.885) (width 0.2) (layer "B.Cu") (net 44)) (segment (start 76.375 17.1879) (end 76.0096 16.8225) (width 0.2) (layer "B.Cu") (net 44)) (segment (start 73.5413 13.574) (end 68.196 13.574) (width 0.2) (layer "B.Cu") (net 45)) (segment (start 76.775 18.275) (end 76.775 16.8077) (width 0.2) (layer "B.Cu") (net 45)) (segment (start 64.885 16.885) (end 63.16 16.885) (width 0.2) (layer "B.Cu") (net 45)) (segment (start 68.196 13.574) (end 64.885 16.885) (width 0.2) (layer "B.Cu") (net 45)) (segment (start 63.16 16.885) (end 61.335 16.885) (width 0.2) (layer "B.Cu") (net 45)) (segment (start 76.775 16.8077) (end 73.5413 13.574) (width 0.2) (layer "B.Cu") (net 45)) (segment (start 43.144 41.0216) (end 33.9947 41.0216) (width 0.2) (layer "F.Cu") (net 46)) (segment (start 70.8365 25.6716) (end 64.7198 25.6716) (width 0.2) (layer "F.Cu") (net 46)) (segment (start 28.9081 35.935) (end 23.235 35.935) (width 0.2) (layer "F.Cu") (net 46)) (segment (start 77.7426 17.0779) (end 77.7426 18.7655) (width 0.2) (layer "F.Cu") (net 46)) (segment (start 77.7427 17.0779) (end 77.7426 17.0779) (width 0.2) (layer "F.Cu") (net 46)) (segment (start 33.9947 41.0216) (end 28.9081 35.935) (width 0.2) (layer "F.Cu") (net 46)) (segment (start 58.9582 31.4332) (end 52.7324 31.4332) (width 0.2) (layer "F.Cu") (net 46)) (segment (start 77.7426 18.7655) (end 70.8365 25.6716) (width 0.2) (layer "F.Cu") (net 46)) (segment (start 52.7324 31.4332) (end 43.144 41.0216) (width 0.2) (layer "F.Cu") (net 46)) (segment (start 64.7198 25.6716) (end 58.9582 31.4332) (width 0.2) (layer "F.Cu") (net 46)) (segment (start 25.06 35.935) (end 23.235 35.935) (width 0.2) (layer "B.Cu") (net 46)) (segment (start 26.785 35.935) (end 25.06 35.935) (width 0.2) (layer "B.Cu") (net 46)) (segment (start 77.7427 17.0779) (end 77.175 17.6456) (width 0.2) (layer "B.Cu") (net 46)) (segment (start 77.175 17.6456) (end 77.175 18.275) (width 0.2) (layer "B.Cu") (net 46)) (segment (start 48.1021 30.1179) (end 58.564 30.1179) (width 0.2) (layer "F.Cu") (net 47)) (segment (start 42.285 35.935) (end 48.1021 30.1179) (width 0.2) (layer "F.Cu") (net 47)) (segment (start 70.8802 24.7957) (end 76.3681 19.3078) (width 0.2) (layer "F.Cu") (net 47)) (segment (start 63.8862 24.7957) (end 70.8802 24.7957) (width 0.2) (layer "F.Cu") (net 47)) (segment (start 58.564 30.1179) (end 63.8862 24.7957) (width 0.2) (layer "F.Cu") (net 47)) (segment (start 76.3681 19.3078) (end 76.3681 19.3008) (width 0.2) (layer "F.Cu") (net 47)) (segment (start 77.0541 19.3008) (end 76.3681 19.3008) (width 0.2) (layer "B.Cu") (net 47)) (segment (start 44.11 35.935) (end 42.285 35.935) (width 0.2) (layer "B.Cu") (net 47)) (segment (start 77.575 18.7799) (end 77.0541 19.3008) (width 0.2) (layer "B.Cu") (net 47)) (segment (start 45.835 35.935) (end 44.11 35.935) (width 0.2) (layer "B.Cu") (net 47)) (segment (start 77.575 18.275) (end 77.575 18.7799) (width 0.2) (layer "B.Cu") (net 47)) (segment (start 80.6295 19.8147) (end 64.5092 35.935) (width 0.2) (layer "F.Cu") (net 48)) (segment (start 64.5092 35.935) (end 61.335 35.935) (width 0.2) (layer "F.Cu") (net 48)) (segment (start 80.0918 19.277) (end 80.6295 19.8147) (width 0.2) (layer "B.Cu") (net 48)) (segment (start 77.975 18.275) (end 77.975 18.7449) (width 0.2) (layer "B.Cu") (net 48)) (segment (start 77.975 18.7449) (end 78.5071 19.277) (width 0.2) (layer "B.Cu") (net 48)) (segment (start 64.885 35.935) (end 63.16 35.935) (width 0.2) (layer "B.Cu") (net 48)) (segment (start 63.16 35.935) (end 61.335 35.935) (width 0.2) (layer "B.Cu") (net 48)) (segment (start 78.5071 19.277) (end 80.0918 19.277) (width 0.2) (layer "B.Cu") (net 48)) (segment (start 82.8968 33.4232) (end 80.385 35.935) (width 0.2) (layer "F.Cu") (net 49)) (segment (start 86.6687 33.4232) (end 82.8968 33.4232) (width 0.2) (layer "F.Cu") (net 49)) (segment (start 80.0318 17.5944) (end 86.6687 24.2313) (width 0.2) (layer "B.Cu") (net 49)) (segment (start 82.21 35.935) (end 80.385 35.935) (width 0.2) (layer "B.Cu") (net 49)) (segment (start 78.375 17.7726) (end 78.5532 17.5944) (width 0.2) (layer "B.Cu") (net 49)) (segment (start 83.935 35.935) (end 82.21 35.935) (width 0.2) (layer "B.Cu") (net 49)) (segment (start 78.375 18.275) (end 78.375 17.7726) (width 0.2) (layer "B.Cu") (net 49)) (segment (start 78.5532 17.5944) (end 80.0318 17.5944) (width 0.2) (layer "B.Cu") (net 49)) (segment (start 86.6687 24.2313) (end 86.6687 33.4232) (width 0.2) (layer "B.Cu") (net 49)) (segment (start 55.0012 37.4501) (end 66.1515 26.2998) (width 0.2) (layer "F.Cu") (net 50)) (segment (start 23.235 54.985) (end 37.9683 54.985) (width 0.2) (layer "F.Cu") (net 50)) (segment (start 37.9683 54.985) (end 55.0012 37.9521) (width 0.2) (layer "F.Cu") (net 50)) (segment (start 66.1515 26.2998) (end 73.0641 26.2998) (width 0.2) (layer "F.Cu") (net 50)) (segment (start 80.3472 19.0167) (end 80.3472 18.7129) (width 0.2) (layer "F.Cu") (net 50)) (segment (start 73.0641 26.2998) (end 80.3472 19.0167) (width 0.2) (layer "F.Cu") (net 50)) (segment (start 55.0012 37.9521) (end 55.0012 37.4501) (width 0.2) (layer "F.Cu") (net 50)) (segment (start 26.785 54.985) (end 25.06 54.985) (width 0.2) (layer "B.Cu") (net 50)) (segment (start 79.2129 18.7129) (end 78.775 18.275) (width 0.2) (layer "B.Cu") (net 50)) (segment (start 80.3472 18.7129) (end 79.2129 18.7129) (width 0.2) (layer "B.Cu") (net 50)) (segment (start 25.06 54.985) (end 23.235 54.985) (width 0.2) (layer "B.Cu") (net 50)) (segment (start 61.9488 41.1341) (end 56.1359 41.1341) (width 0.2) (layer "F.Cu") (net 51)) (segment (start 80.1508 22.9321) (end 61.9488 41.1341) (width 0.2) (layer "F.Cu") (net 51)) (segment (start 80.1508 21.8245) (end 80.1508 22.9321) (width 0.2) (layer "F.Cu") (net 51)) (segment (start 56.1359 41.1341) (end 42.285 54.985) (width 0.2) (layer "F.Cu") (net 51)) (segment (start 44.11 54.985) (end 42.285 54.985) (width 0.2) (layer "B.Cu") (net 51)) (segment (start 45.835 54.985) (end 44.11 54.985) (width 0.2) (layer "B.Cu") (net 51)) (segment (start 78.775 20.575) (end 80.0245 21.8245) (width 0.2) (layer "B.Cu") (net 51)) (segment (start 80.0245 21.8245) (end 80.1508 21.8245) (width 0.2) (layer "B.Cu") (net 51)) (segment (start 68.3208 47.9992) (end 61.335 54.985) (width 0.2) (layer "F.Cu") (net 52)) (segment (start 81.0053 47.9992) (end 68.3208 47.9992) (width 0.2) (layer "F.Cu") (net 52)) (segment (start 85.4795 28.1314) (end 85.4795 43.525) (width 0.2) (layer "B.Cu") (net 52)) (segment (start 85.4795 43.525) (end 81.0053 47.9992) (width 0.2) (layer "B.Cu") (net 52)) (segment (start 78.375 20.575) (end 78.375 21.0269) (width 0.2) (layer "B.Cu") (net 52)) (segment (start 64.885 54.985) (end 63.16 54.985) (width 0.2) (layer "B.Cu") (net 52)) (segment (start 78.375 21.0269) (end 85.4795 28.1314) (width 0.2) (layer "B.Cu") (net 52)) (segment (start 63.16 54.985) (end 61.335 54.985) (width 0.2) (layer "B.Cu") (net 52)) (segment (start 83.935 54.985) (end 82.21 54.985) (width 0.2) (layer "B.Cu") (net 53)) (segment (start 82.21 54.985) (end 80.385 54.985) (width 0.2) (layer "B.Cu") (net 53)) (segment (start 80.385 43.1319) (end 79.0707 41.8176) (width 0.2) (layer "B.Cu") (net 53)) (segment (start 79.0707 41.8176) (end 79.0707 37.4411) (width 0.2) (layer "B.Cu") (net 53)) (segment (start 79.0707 37.4411) (end 77.975 36.3454) (width 0.2) (layer "B.Cu") (net 53)) (segment (start 77.975 36.3454) (end 77.975 20.575) (width 0.2) (layer "B.Cu") (net 53)) (segment (start 80.385 54.985) (end 80.385 43.1319) (width 0.2) (layer "B.Cu") (net 53)) (segment (start 81.5593 45.0864) (end 81.5593 48.8728) (width 0.2) (layer "F.Cu") (net 54)) (segment (start 73.2438 57.8028) (end 50.6616 80.385) (width 0.2) (layer "F.Cu") (net 54)) (segment (start 73.2438 57.1883) (end 73.2438 57.8028) (width 0.2) (layer "F.Cu") (net 54)) (segment (start 79.2304 42.7575) (end 81.5593 45.0864) (width 0.2) (layer "F.Cu") (net 54)) (segment (start 50.6616 80.385) (end 50.54 80.385) (width 0.2) (layer "F.Cu") (net 54)) (segment (start 81.5593 48.8728) (end 73.2438 57.1883) (width 0.2) (layer "F.Cu") (net 54)) (segment (start 50.54 83.935) (end 50.54 82.21) (width 0.2) (layer "B.Cu") (net 54)) (segment (start 50.54 82.21) (end 50.54 80.385) (width 0.2) (layer "B.Cu") (net 54)) (segment (start 85.8813 26.7748) (end 78.9954 19.8889) (width 0.2) (layer "B.Cu") (net 55)) (segment (start 85.8813 73.6187) (end 85.8813 26.7748) (width 0.2) (layer "B.Cu") (net 55)) (segment (start 77.175 20.1018) (end 77.175 20.575) (width 0.2) (layer "B.Cu") (net 55)) (segment (start 79.115 83.935) (end 79.115 82.21) (width 0.2) (layer "B.Cu") (net 55)) (segment (start 77.3879 19.8889) (end 77.175 20.1018) (width 0.2) (layer "B.Cu") (net 55)) (segment (start 79.115 80.385) (end 85.8813 73.6187) (width 0.2) (layer "B.Cu") (net 55)) (segment (start 78.9954 19.8889) (end 77.3879 19.8889) (width 0.2) (layer "B.Cu") (net 55)) (segment (start 79.115 82.21) (end 79.115 80.385) (width 0.2) (layer "B.Cu") (net 55)) (segment (start 36.6795 23.7492) (end 35.75 24.6787) (width 0.2) (layer "B.Cu") (net 56)) (segment (start 60.25 26.405) (end 59.3775 27.2775) (width 0.2) (layer "B.Cu") (net 56)) (segment (start 60.25 26.275) (end 60.25 26.405) (width 0.2) (layer "B.Cu") (net 56)) (segment (start 59.3775 27.2775) (end 47.2701 27.2775) (width 0.2) (layer "B.Cu") (net 56)) (segment (start 47.2701 27.2775) (end 43.7418 23.7492) (width 0.2) (layer "B.Cu") (net 56)) (segment (start 35.75 24.6787) (end 35.75 24.775) (width 0.2) (layer "B.Cu") (net 56)) (segment (start 43.7418 23.7492) (end 36.6795 23.7492) (width 0.2) (layer "B.Cu") (net 56)) (segment (start 60.5738 23.7462) (end 61.1807 24.3531) (width 0.2) (layer "B.Cu") (net 57)) (segment (start 55.6988 23.7462) (end 60.5738 23.7462) (width 0.2) (layer "B.Cu") (net 57)) (segment (start 54.8 24.645) (end 55.6988 23.7462) (width 0.2) (layer "B.Cu") (net 57)) (segment (start 55.0293 39.5215) (end 57.6048 42.097) (width 0.2) (layer "B.Cu") (net 57)) (segment (start 79.3 45.325) (end 79.3 45.45) (width 0.2) (layer "B.Cu") (net 57)) (segment (start 78.4233 46.3267) (end 72.4158 46.3267) (width 0.2) (layer "B.Cu") (net 57)) (segment (start 79.3 45.45) (end 78.4233 46.3267) (width 0.2) (layer "B.Cu") (net 57)) (segment (start 61.1807 31.2899) (end 55.0293 37.4413) (width 0.2) (layer "B.Cu") (net 57)) (segment (start 57.6048 42.097) (end 58.7828 42.097) (width 0.2) (layer "B.Cu") (net 57)) (segment (start 54.8 24.775) (end 54.8 24.645) (width 0.2) (layer "B.Cu") (net 57)) (segment (start 61.1807 24.3531) (end 61.1807 31.2899) (width 0.2) (layer "B.Cu") (net 57)) (segment (start 55.0293 37.4413) (end 55.0293 39.5215) (width 0.2) (layer "B.Cu") (net 57)) (segment (start 72.4158 46.3267) (end 71.3224 45.2333) (width 0.2) (layer "B.Cu") (net 57)) (segment (start 61.75 43.825) (end 60.25 45.325) (width 0.2) (layer "B.Cu") (net 58)) (segment (start 73.85 43.825) (end 61.75 43.825) (width 0.2) (layer "B.Cu") (net 58)) (segment (start 41.4418 45.5668) (end 41.2 45.325) (width 0.2) (layer "B.Cu") (net 59)) (segment (start 53.0582 45.5668) (end 41.4418 45.5668) (width 0.2) (layer "B.Cu") (net 59)) (segment (start 54.8 43.825) (end 53.0582 45.5668) (width 0.2) (layer "B.Cu") (net 59)) (segment (start 34.0207 45.5543) (end 22.3793 45.5543) (width 0.2) (layer "B.Cu") (net 60)) (segment (start 35.75 43.825) (end 34.0207 45.5543) (width 0.2) (layer "B.Cu") (net 60)) (segment (start 22.3793 45.5543) (end 22.15 45.325) (width 0.2) (layer "B.Cu") (net 60)) (segment (start 18.8309 50.2934) (end 18.8309 54.5897) (width 0.2) (layer "B.Cu") (net 61)) (segment (start 18.8309 54.5897) (end 16.9293 56.4913) (width 0.2) (layer "B.Cu") (net 61)) (segment (start 20.2198 61.8492) (end 22.4952 61.8492) (width 0.2) (layer "B.Cu") (net 61)) (segment (start 16.7 43.825) (end 15.7474 44.7776) (width 0.2) (layer "B.Cu") (net 61)) (segment (start 16.9293 56.4913) (end 16.9293 58.5587) (width 0.2) (layer "B.Cu") (net 61)) (segment (start 15.7474 47.2099) (end 18.8309 50.2934) (width 0.2) (layer "B.Cu") (net 61)) (segment (start 23.1334 62.4874) (end 23.1334 63.3916) (width 0.2) (layer "B.Cu") (net 61)) (segment (start 23.1334 63.3916) (end 22.15 64.375) (width 0.2) (layer "B.Cu") (net 61)) (segment (start 22.4952 61.8492) (end 23.1334 62.4874) (width 0.2) (layer "B.Cu") (net 61)) (segment (start 15.7474 44.7776) (end 15.7474 47.2099) (width 0.2) (layer "B.Cu") (net 61)) (segment (start 16.9293 58.5587) (end 20.2198 61.8492) (width 0.2) (layer "B.Cu") (net 61)) (segment (start 25.1382 64.6263) (end 24.323 65.4415) (width 0.2) (layer "B.Cu") (net 62)) (segment (start 15.7268 64.816) (end 15.7268 63.8482) (width 0.2) (layer "B.Cu") (net 62)) (segment (start 24.323 65.4415) (end 16.3523 65.4415) (width 0.2) (layer "B.Cu") (net 62)) (segment (start 16.3523 65.4415) (end 15.7268 64.816) (width 0.2) (layer "B.Cu") (net 62)) (segment (start 41.2 64.375) (end 41.2 64.4732) (width 0.2) (layer "B.Cu") (net 62)) (segment (start 40.2965 65.3767) (end 28.3862 65.3767) (width 0.2) (layer "B.Cu") (net 62)) (segment (start 41.2 64.4732) (end 40.2965 65.3767) (width 0.2) (layer "B.Cu") (net 62)) (segment (start 28.3862 65.3767) (end 27.6358 64.6263) (width 0.2) (layer "B.Cu") (net 62)) (segment (start 15.7268 63.8482) (end 16.7 62.875) (width 0.2) (layer "B.Cu") (net 62)) (segment (start 27.6358 64.6263) (end 25.1382 64.6263) (width 0.2) (layer "B.Cu") (net 62)) (segment (start 60.25 64.375) (end 60.25 64.5049) (width 0.2) (layer "B.Cu") (net 63)) (segment (start 59.3677 65.3872) (end 47.1659 65.3872) (width 0.2) (layer "B.Cu") (net 63)) (segment (start 47.1659 65.3872) (end 43.6279 61.8492) (width 0.2) (layer "B.Cu") (net 63)) (segment (start 36.6795 61.8492) (end 35.75 62.7787) (width 0.2) (layer "B.Cu") (net 63)) (segment (start 35.75 62.7787) (end 35.75 62.875) (width 0.2) (layer "B.Cu") (net 63)) (segment (start 60.25 64.5049) (end 59.3677 65.3872) (width 0.2) (layer "B.Cu") (net 63)) (segment (start 43.6279 61.8492) (end 36.6795 61.8492) (width 0.2) (layer "B.Cu") (net 63)) (segment (start 62.782 61.8492) (end 55.7295 61.8492) (width 0.2) (layer "B.Cu") (net 64)) (segment (start 66.0904 65.1576) (end 62.782 61.8492) (width 0.2) (layer "B.Cu") (net 64)) (segment (start 79.3 64.15) (end 79.3 64.28) (width 0.2) (layer "B.Cu") (net 64)) (segment (start 54.8 62.7787) (end 54.8 62.875) (width 0.2) (layer "B.Cu") (net 64)) (segment (start 79.3 64.28) (end 78.4224 65.1576) (width 0.2) (layer "B.Cu") (net 64)) (segment (start 78.4224 65.1576) (end 66.0904 65.1576) (width 0.2) (layer "B.Cu") (net 64)) (segment (start 55.7295 61.8492) (end 54.8 62.7787) (width 0.2) (layer "B.Cu") (net 64)) (segment (start 74.7579 61.6121) (end 79.6243 61.6121) (width 0.2) (layer "B.Cu") (net 65)) (segment (start 73.85 62.65) (end 73.85 62.52) (width 0.2) (layer "B.Cu") (net 65)) (segment (start 80.3093 66.9707) (end 79.3 67.98) (width 0.2) (layer "B.Cu") (net 65)) (segment (start 79.6243 61.6121) (end 80.3093 62.2971) (width 0.2) (layer "B.Cu") (net 65)) (segment (start 80.3093 62.2971) (end 80.3093 66.9707) (width 0.2) (layer "B.Cu") (net 65)) (segment (start 73.85 62.52) (end 74.7579 61.6121) (width 0.2) (layer "B.Cu") (net 65)) (segment (start 73.85 66.48) (end 72.35 67.98) (width 0.2) (layer "B.Cu") (net 66)) (segment (start 72.35 67.98) (end 50.725 67.98) (width 0.2) (layer "B.Cu") (net 66)) (segment (start 22.8942 69.652) (end 16.552 69.652) (width 0.2) (layer "F.Cu") (net 67)) (segment (start 15.0414 71.1626) (end 15.0414 75.8187) (width 0.2) (layer "F.Cu") (net 67)) (segment (start 27.3251 65.2211) (end 22.8942 69.652) (width 0.2) (layer "F.Cu") (net 67)) (segment (start 18.3146 79.0919) (end 21.3657 79.0919) (width 0.2) (layer "F.Cu") (net 67)) (segment (start 15.0414 75.8187) (end 18.3146 79.0919) (width 0.2) (layer "F.Cu") (net 67)) (segment (start 16.552 69.652) (end 15.0414 71.1626) (width 0.2) (layer "F.Cu") (net 67)) (segment (start 45.275 66.48) (end 28.584 66.48) (width 0.2) (layer "B.Cu") (net 67)) (segment (start 22.15 78.3076) (end 22.15 77.325) (width 0.2) (layer "B.Cu") (net 67)) (segment (start 21.3657 79.0919) (end 22.15 78.3076) (width 0.2) (layer "B.Cu") (net 67)) (segment (start 28.584 66.48) (end 27.3251 65.2211) (width 0.2) (layer "B.Cu") (net 67)) (segment (start 16.675 71.81186) (end 19.425 71.075) (width 0.8) (layer "F.Cu") (net 39)) (segment (start 19.425 71.075) (end 22.175 71.81186) (width 0.8) (layer "F.Cu") (net 39)) (segment (start 22.175 71.81186) (end 24.18814 73.825) (width 0.8) (layer "F.Cu") (net 39)) (segment (start 24.18814 73.825) (end 24.925 76.575) (width 0.8) (layer "F.Cu") (net 39)) (segment (start 24.925 76.575) (end 24.18814 79.325) (width 0.8) (layer "F.Cu") (net 39)) (segment (start 24.18814 79.325) (end 22.175 81.33814) (width 0.8) (layer "F.Cu") (net 39)) (segment (start 22.175 81.33814) (end 19.425 82.075) (width 0.8) (layer "F.Cu") (net 39)) (segment (start 19.425 82.075) (end 16.675 81.33814) (width 0.8) (layer "F.Cu") (net 39)) (segment (start 16.7 75.825) (end 9 75.825) (width 0.15) (layer "B.Cu") (net 25)) (segment (start 75.175 18.275) (end 75.175 17) (width 0.2) (layer "B.Cu") (net 9)) (segment (start 75.175 17) (end 74.5 16) (width 0.2) (layer "B.Cu") (net 9)) (segment (start 30 12) (end 30 20) (width 0.2) (layer "F.Cu") (net 9)) (segment (start 16.7 77.325) (end 9 77.325) (width 0.2) (layer "B.Cu") (net 9)) (segment (start 9 75.825) (end 4 75.825) (width 0.2) (layer "B.Cu") (net 25)) (segment (start 4 75.825) (end 4 3) (width 0.2) (layer "B.Cu") (net 25)) (segment (start 4 3) (end 42 3) (width 0.2) (layer "B.Cu") (net 25)) (segment (start 42 3) (end 42 12) (width 0.2) (layer "B.Cu") (net 25)) (segment (start 30.5 64) (end 29 64) (width 0.2) (layer "B.Cu") (net 9)) (segment (start 22.15 75.825) (end 22.15 74.5) (width 0.25) (layer "B.Cu") (net 1)) (segment (start 22.15 74.5) (end 9 74.5) (width 0.25) (layer "B.Cu") (net 1)) (segment (start 58.7828 42.097) (end 58.7828 40.5) (width 0.2) (layer "In2.Cu") (net 57)) (segment (start 58.7828 40.5) (end 62 40.5) (width 0.2) (layer "In2.Cu") (net 57)) (segment (start 62 40.5) (end 62 47) (width 0.2) (layer "In2.Cu") (net 57)) (segment (start 62 47) (end 71.3224 47) (width 0.2) (layer "In2.Cu") (net 57)) (segment (start 71.3224 47) (end 71.3224 45.2333) (width 0.2) (layer "In2.Cu") (net 57)) (segment (start 74.775 18.275) (end 74.775 17.4) (width 0.2) (layer "B.Cu") (net 54)) (segment (start 74.775 17.4) (end 73.5 17) (width 0.2) (layer "B.Cu") (net 54)) (segment (start 77.575 20.575) (end 77.575 32.823) (width 0.2) (layer "B.Cu") (net 1)) (segment (start 77.575 32.823) (end 74.0679 36.3301) (width 0.2) (layer "B.Cu") (net 1)) (segment (start 73.5 17) (end 73.6 17) (width 0.2) (layer "In1.Cu") (net 54)) (segment (start 73.6 17) (end 73.6 19) (width 0.2) (layer "In1.Cu") (net 54)) (segment (start 73.6 19) (end 74.2 19.6) (width 0.2) (layer "In1.Cu") (net 54)) (segment (start 74.2 19.6) (end 74.2 30.8) (width 0.2) (layer "In1.Cu") (net 54)) (segment (start 74.2 30.8) (end 75.8 32.4) (width 0.2) (layer "In1.Cu") (net 54)) (segment (start 75.8 32.4) (end 75.8 32.6) (width 0.2) (layer "In1.Cu") (net 54)) (segment (start 75.8 32.6) (end 76 32.8) (width 0.2) (layer "In1.Cu") (net 54)) (segment (start 76 32.8) (end 76 34.4) (width 0.2) (layer "In1.Cu") (net 54)) (segment (start 76 34.4) (end 78.6 37) (width 0.2) (layer "In1.Cu") (net 54)) (segment (start 78.6 37) (end 78.6 37.2) (width 0.2) (layer "In1.Cu") (net 54)) (segment (start 78.6 37.2) (end 78.8 37.4) (width 0.2) (layer "In1.Cu") (net 54)) (segment (start 78.8 37.4) (end 78.8 37.6) (width 0.2) (layer "In1.Cu") (net 54)) (segment (start 78.8 37.6) (end 79 37.8) (width 0.2) (layer "In1.Cu") (net 54)) (segment (start 79 37.8) (end 79 42.4) (width 0.2) (layer "In1.Cu") (net 54)) (segment (start 79 42.4) (end 79.2 42.6) (width 0.2) (layer "In1.Cu") (net 54)) (segment (start 79.2 42.6) (end 79.2 42.8) (width 0.2) (layer "In1.Cu") (net 54)) (segment (start 79.2 42.8) (end 79.2304 42.7575) (width 0.2) (layer "In1.Cu") (net 54)) (segment (start 74.375 18.275) (end 72.5 18) (width 0.2) (layer "B.Cu") (net 1)) (via (at 36.0497 21.2667) (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") (net 24)) (via (at 76.5867 21.997) (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") (net 24)) (via (at 68.9996 14.1257) (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") (net 25)) (via (at 66.1207 21.4826) (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") (net 39)) (via (at 59.6616 41.897) (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") (net 39)) (via (at 75.5602 19.3355) (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") (net 41)) (via (at 71.2912 21.7218) (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") (net 42)) (via (at 73.5149 19.8701) (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") (net 43)) (via (at 76.0096 16.8225) (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") (net 44)) (via (at 77.7427 17.0779) (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") (net 46)) (via (at 76.3681 19.3008) (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") (net 47)) (via (at 80.6295 19.8147) (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") (net 48)) (via (at 86.6687 33.4232) (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") (net 49)) (via (at 80.3472 18.7129) (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") (net 50)) (via (at 80.1508 21.8245) (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") (net 51)) (via (at 81.0053 47.9992) (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") (net 52)) (via (at 79.2304 42.7575) (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") (net 54)) (via (at 71.3224 45.2333) (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") (net 57)) (via (at 58.7828 42.097) (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") (net 57)) (via (at 27.3251 65.2211) (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") (net 67)) (via (at 21.3657 79.0919) (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") (net 67)) (via (at 35.75 26.275) (size 0.45) (drill 0.2) (layers "F.Cu" "B.Cu") (net 9)) (via (at 54.8 26.275) (size 0.45) (drill 0.2) (layers "F.Cu" "B.Cu") (net 9)) (via (at 16.7 45.325) (size 0.45) (drill 0.2) (layers "F.Cu" "B.Cu") (net 9)) (via (at 35.75 45.325) (size 0.45) (drill 0.2) (layers "F.Cu" "B.Cu") (net 9)) (via (at 54.8 45.325) (size 0.45) (drill 0.2) (layers "F.Cu" "B.Cu") (net 9)) (via (at 73.85 45.325) (size 0.45) (drill 0.2) (layers "F.Cu" "B.Cu") (net 9)) (via (at 16.7 64.375) (size 0.45) (drill 0.2) (layers "F.Cu" "B.Cu") (net 9)) (via (at 35.75 64.375) (size 0.45) (drill 0.2) (layers "F.Cu" "B.Cu") (net 9)) (via (at 54.8 64.375) (size 0.45) (drill 0.2) (layers "F.Cu" "B.Cu") (net 9)) (via (at 73.85 64.15) (size 0.45) (drill 0.2) (layers "F.Cu" "B.Cu") (net 9)) (via (at 45.275 67.98) (size 0.45) (drill 0.2) (layers "F.Cu" "B.Cu") (net 9)) (via (at 73.85 67.98) (size 0.45) (drill 0.2) (layers "F.Cu" "B.Cu") (net 9)) (via (at 30.5 26) (size 0.45) (drill 0.2) (layers "F.Cu" "B.Cu") (net 9)) (via (at 49.5 26) (size 0.45) (drill 0.2) (layers "F.Cu" "B.Cu") (net 9)) (via (at 11.5 45) (size 0.45) (drill 0.2) (layers "F.Cu" "B.Cu") (net 9)) (via (at 30.5 45) (size 0.45) (drill 0.2) (layers "F.Cu" "B.Cu") (net 9)) (via (at 49.5 45) (size 0.45) (drill 0.2) (layers "F.Cu" "B.Cu") (net 9)) (via (at 71.5 40) (size 0.45) (drill 0.2) (layers "F.Cu" "B.Cu") (net 9)) (via (at 11.5 64) (size 0.45) (drill 0.2) (layers "F.Cu" "B.Cu") (net 9)) (via (at 49.5 64) (size 0.45) (drill 0.2) (layers "F.Cu" "B.Cu") (net 9)) (via (at 68.5 64) (size 0.45) (drill 0.2) (layers "F.Cu" "B.Cu") (net 9)) (via (at 39.5 70) (size 0.45) (drill 0.2) (layers "F.Cu" "B.Cu") (net 9)) (via (at 68.5 70) (size 0.45) (drill 0.2) (layers "F.Cu" "B.Cu") (net 9)) (via (at 8.5 83) (size 0.45) (drill 0.2) (layers "F.Cu" "B.Cu") (net 9)) (via (at 74.5 16) (size 0.45) (drill 0.2) (layers "F.Cu" "B.Cu") (net 9)) (via (at 30 20) (size 0.45) (drill 0.2) (layers "F.Cu" "B.Cu") (net 9)) (via (at 9 77.325) (size 0.45) (drill 0.2) (layers "F.Cu" "B.Cu") (net 9)) (via (at 41.2 24.775) (size 0.45) (drill 0.2) (layers "F.Cu" "B.Cu") (net 1)) (via (at 60.25 24.775) (size 0.45) (drill 0.2) (layers "F.Cu" "B.Cu") (net 1)) (via (at 22.15 43.825) (size 0.45) (drill 0.2) (layers "F.Cu" "B.Cu") (net 1)) (via (at 41.2 43.825) (size 0.45) (drill 0.2) (layers "F.Cu" "B.Cu") (net 1)) (via (at 79.3 43.825) (size 0.45) (drill 0.2) (layers "F.Cu" "B.Cu") (net 1)) (via (at 22.15 62.875) (size 0.45) (drill 0.2) (layers "F.Cu" "B.Cu") (net 1)) (via (at 41.2 62.875) (size 0.45) (drill 0.2) (layers "F.Cu" "B.Cu") (net 1)) (via (at 60.25 62.875) (size 0.45) (drill 0.2) (layers "F.Cu" "B.Cu") (net 1)) (via (at 79.3 62.65) (size 0.45) (drill 0.2) (layers "F.Cu" "B.Cu") (net 1)) (via (at 50.725 66.48) (size 0.45) (drill 0.2) (layers "F.Cu" "B.Cu") (net 1)) (via (at 79.3 66.48) (size 0.45) (drill 0.2) (layers "F.Cu" "B.Cu") (net 1)) (via (at 42 12) (size 0.45) (drill 0.2) (layers "F.Cu" "B.Cu") (net 25)) (via (at 29 64) (size 0.45) (drill 0.2) (layers "F.Cu" "B.Cu") (net 9)) (via (at 9 74.5) (size 0.45) (drill 0.2) (layers "F.Cu" "B.Cu") (net 1)) (via (at 60.25 43.825) (size 0.45) (drill 0.2) (layers "F.Cu" "B.Cu") (net 1)) (via (at 73.5 17) (size 0.45) (drill 0.2) (layers "F.Cu" "B.Cu") (net 54)) (via (at 74.0679 36.3301) (size 0.45) (drill 0.2) (layers "F.Cu" "B.Cu") (net 1)) (via (at 72.5 18) (size 0.45) (drill 0.2) (layers "F.Cu" "B.Cu") (net 1)) (zone (net 9) (net_name "5V_LED") (layer "In2.Cu") (hatch edge 0.5) (connect_pads (clearance 0.2)) (min_thickness 0.15) (fill yes (thermal_gap 0.25) (thermal_bridge_width 0.25)) (polygon (pts (xy 0.3 0.3) (xy 95.7 0.3) (xy 95.7 95.7) (xy 0.3 95.7)))) (zone (net 1) (net_name "GND") (layer "In1.Cu") (hatch edge 0.5) (connect_pads (clearance 0.2)) (min_thickness 0.15) (fill yes (thermal_gap 0.3) (thermal_bridge_width 0.3)) (polygon (pts (xy 0.3 0.3) (xy 95.7 0.3) (xy 95.7 95.7) (xy 0.3 95.7)))) (zone (net 1) (net_name "GND") (layer "F.Cu") (hatch edge 0.5) (connect_pads (clearance 0.25)) (min_thickness 0.15) (fill yes (thermal_gap 0.3) (thermal_bridge_width 0.3)) (polygon (pts (xy 0.3 0.3) (xy 95.7 0.3) (xy 95.7 95.7) (xy 0.3 95.7)))) (zone (net 1) (net_name "GND") (layer "B.Cu") (hatch edge 0.5) (connect_pads (clearance 0.25)) (min_thickness 0.15) (fill yes (thermal_gap 0.3) (thermal_bridge_width 0.3)) (polygon (pts (xy 0.3 0.3) (xy 95.7 0.3) (xy 95.7 95.7) (xy 0.3 95.7)))) (zone (net 0) (net_name "") (layers "F.Cu" "In1.Cu" "In2.Cu" "B.Cu") (hatch edge 0.5) (keepout (tracks not_allowed) (vias not_allowed) (pads allowed) (copperpour not_allowed) (footprints allowed)) (polygon (pts (xy 54 87) (xy 78 87) (xy 78 96) (xy 54 96)))) (zone (net 0) (net_name "") (layer "F.Cu") (hatch edge 0.5) (keepout (tracks allowed) (vias not_allowed) (pads allowed) (copperpour not_allowed) (footprints allowed)) (polygon (pts (xy 10.425 67.575) (xy 16.425 67.575) (xy 16.425 73.575) (xy 10.425 73.575)))) (zone (net 0) (net_name "") (layers "B.Cu" "In1.Cu" "In2.Cu") (hatch edge 0.5) (keepout (tracks not_allowed) (vias not_allowed) (pads allowed) (copperpour not_allowed) (footprints allowed)) (polygon (pts (xy 10.425 67.575) (xy 16.425 67.575) (xy 16.425 73.575) (xy 10.425 73.575)))) (zone (net 0) (net_name "") (layer "F.Cu") (hatch edge 0.5) (keepout (tracks allowed) (vias not_allowed) (pads allowed) (copperpour not_allowed) (footprints allowed)) (polygon (pts (xy 10.425 79.575) (xy 16.425 79.575) (xy 16.425 85.575) (xy 10.425 85.575)))) (zone (net 0) (net_name "") (layers "B.Cu" "In1.Cu" "In2.Cu") (hatch edge 0.5) (keepout (tracks not_allowed) (vias not_allowed) (pads allowed) (copperpour not_allowed) (footprints allowed)) (polygon (pts (xy 10.425 79.575) (xy 16.425 79.575) (xy 16.425 85.575) (xy 10.425 85.575)))) (zone (net 0) (net_name "") (layer "F.Cu") (hatch edge 0.5) (keepout (tracks allowed) (vias not_allowed) (pads allowed) (copperpour not_allowed) (footprints allowed)) (polygon (pts (xy 22.425 67.575) (xy 28.425 67.575) (xy 28.425 85.575) (xy 22.425 85.575)))) (zone (net 0) (net_name "") (layers "B.Cu" "In1.Cu" "In2.Cu") (hatch edge 0.5) (keepout (tracks not_allowed) (vias not_allowed) (pads allowed) (copperpour not_allowed) (footprints allowed)) (polygon (pts (xy 22.425 67.575) (xy 28.425 67.575) (xy 28.425 85.575) (xy 22.425 85.575)))) (zone (net 0) (net_name "") (layer "F.Cu") (hatch edge 0.5) (keepout (tracks allowed) (vias not_allowed) (pads allowed) (copperpour not_allowed) (footprints allowed)) (polygon (pts (xy 16.425 67.575) (xy 22.425 67.575) (xy 22.425 73.575) (xy 16.425 73.575)))) (zone (net 0) (net_name "") (layers "B.Cu" "In1.Cu" "In2.Cu") (hatch edge 0.5) (keepout (tracks not_allowed) (vias not_allowed) (pads allowed) (copperpour not_allowed) (footprints allowed)) (polygon (pts (xy 16.425 67.575) (xy 22.425 67.575) (xy 22.425 73.575) (xy 16.425 73.575)))) (zone (net 0) (net_name "") (layer "F.Cu") (hatch edge 0.5) (keepout (tracks allowed) (vias not_allowed) (pads allowed) (copperpour not_allowed) (footprints allowed)) (polygon (pts (xy 16.425 79.575) (xy 22.425 79.575) (xy 22.425 85.575) (xy 16.425 85.575)))) (zone (net 0) (net_name "") (layers "B.Cu" "In1.Cu" "In2.Cu") (hatch edge 0.5) (keepout (tracks not_allowed) (vias not_allowed) (pads allowed) (copperpour not_allowed) (footprints allowed)) (polygon (pts (xy 16.425 79.575) (xy 22.425 79.575) (xy 22.425 85.575) (xy 16.425 85.575)))) )