# Bootleg Radio (538) - example settings.txt
#
# Copy this file to the ROOT of your USB stick and rename it to "settings.txt".
# It is read once each time the stick is mounted, after the filesystem mounts.
# Every line is optional; delete or comment out anything you do not want to
# change, and the card keeps its default. Lines starting with # or ; are
# comments. Keys are case-insensitive. The values below are all the defaults, so
# this file as-is changes nothing.

# Power-on "tune" mode: loop | sync
#   loop  a new station starts at its loop start point
#   sync  a new station keeps the proportional position (synchronised jump)
mode = sync

# Bank to start on, 0-31 (0 = the root directory; 1.. = subfolders in order)
bank = 0

# Internal clock tempo in BPM, 30-240 (used when Pulse in 1 is unpatched)
clockBpm = 120

# Clock pulses per triangle cycle on CV out 2, 1-256
#   40 = one cycle every 20 seconds at 120 BPM
triPulses = 40

# Pulse out 1: gate | tick | clock | off
#   gate   high while the loop plays, low during the wrap/seek gap
#   tick   a short pulse at each loop wrap
#   clock  the active clock pulse
#   off    always low
pulse1 = gate

# Pulse out 2: gate | tick | clock | off
pulse2 = tick

# LED display: verbose | quiet
#   verbose  level, playing, station-change, mounted, underrun/fault
#   quiet    level, playing and mounted only (LEDs 3 and 5 stay dark)
led = verbose