# Printheads for Stealthburner.

Choose files containing ***front*** based on your hotend and ***rear_cw1*** / ***rear_cw2*** based on whether you're using the original Clockwork (CW1) or the new Clockwork2 (CW2) extruder.

## Printhead Compatibility:

| Hotend | Compatible Parts | Mounting Hardware | Notes |
| :--------: | :--------: | :--------: | :--------: 
| Chube Compact | (Chube_Compact) | 4x M3x12mm  |  |
| Phaetus/Trianglelab Dragon ST/SF/HF | (P-DRG) | 4x M2.5x8mm | Remove the screws attaching the groove-mount adaptor to access the hard mounting points. |
| Phaetus BMO | (P-BMO) | 4x M2.5x8mm | Unscrew the groove-mount adaptor to access the hard mounting points. |
| Phaetus BMS (6 fins) | (P-BMS6) | 2x M3x12mm | Phaetus has two versions of the BMS; Count the number of fins on your hotend to determine your version. |
| Phaetus BMS (7 fins) | (P-BMS7) | 2x M3x12mm | Phaetus has two versions of the BMS; Count the number of fins on your hotend to determine your version. |
| Phaetus Rapido | (P-RPD) | 4x M2.5x8mm | Only the standard Rapido is supported (No UHF support). See the additional note about [heatsink orientations](phaetus_rapido/README.md). |
| E3D Revo Micro | (E-RM) | M12x1.5mm Plastic Nut | If your mount nut has a ridge on it, put that to the top. |
| E3D Revo Six | (E-V/R6) | N/A |  |
| E3D V6 | (E-V/R6) | N/A |  |
| E3D Revo Voron | (E-RV) | 4x M3x8mm |  |