# Spanish translation of the Godot Engine class reference. # Copyright (c) 2014-present Godot Engine contributors. # Copyright (c) 2007-2014 Juan Linietsky, Ariel Manzur. # This file is distributed under the same license as the Godot source code. # # 44pes Games <44pes.games@gmail.com>, 2020. # Megamega53 , 2020, 2021. # Javier Ocampos , 2020, 2021, 2022, 2023, 2025. # Serk Lintur , 2020. # Lambientan , 2020. # paco , 2020, 2021. # No te interesa , 2020. # Jonatan , 2020. # peter9811 , 2020. # Ventura Pérez García , 2020, 2022. # Joakker , 2020, 2021. # ACM , 2020. # Pierre Stempin , 2020. # José Manuel Jurado Bujalance , 2020. # Osman Robles , 2020. # jonagamerpro1234 ss , 2020, 2021. # Cameron Toms , 2021. # Roderick Lagunas , 2021. # Erick Figueroa , 2021. # Anderson Guzman Abreu , 2021. # Fonspem None , 2021. # Andres David Calderón Jimenez , 2021. # Manuel Cantón Guillén , 2021. # Rémi Verschelde , 2021. # Rémi Verschelde , 2021, 2025, 2026. # Alfonso V , 2022, 2024. # Alejandro Pérez , 2022. # Cristhian Pineda Castro , 2022. # Francesco Santoro , 2022. # Jake-insane , 2022. # Luis Alberto Flores Baca , 2022. # emnrx , 2022. # BlackNoizE404 , 2022. # Keyla Arroyos , 2022. # Victor Stancioiu , 2022. # yohanger , 2022. # Mateo , 2023. # Alan Arrecis , 2023. # Fernando Sacó , 2023. # Damien Monasterios , 2023. # andres gallegos , 2023. # Dariem Lázaro García López , 2023. # Adrian Migueles , 2023. # Joinner Medina , 2023. # Denis Anfruns , 2023. # Luis Ortiz , 2023. # Biel Serrano Sanchez , 2023. # Скотт Сторм , 2023. # Alvaro Tejada , 2023. # Abrahams Rubí , 2023. # Braulio León Madrid Escobar , 2023. # Andres Diaz , 2023. # Jose Orenday , 2023. # ndfsa <25588077+ndfsa@users.noreply.github.com>, 2023. # diegoaichele , 2023. # Ignacio Baptista , 2023. # Sergio Varela , 2023. # Moises Alejandro Vera Torrealba , 2023. # "Francisco S. F." , 2023. # Jorge González , 2023. # Jorge Julio Torres , 2023. # simomi 073 , 2023, 2024. # Alejandro Ruiz Esclapez , 2023. # Carlos Cortes Garcia , 2023. # Victor Gimenez , 2024. # Santiago Fagúndez , 2024. # el erok , 2024. # Miguel de Dios Matias , 2024. # Ismael Morejón Blasco , 2024. # Yllen Fernandez , 2024. # Franco Ezequiel Ibañez , 2024. # Zeerats , 2024. # Agustín Da Silva , 2024. # Daniel Miranda , 2024. # Cristofer Binimelis , 2024. # Yarelio , 2024. # Augusto Hernández , 2024. # José Artigas , 2024. # Zgtale , 2024. # Juan Matias Olmos , 2024, 2026. # Juan Castro , 2024. # Alejandro Moctezuma , 2024, 2025, 2026. # gallegonovato , 2024. # Andres David Calderon , 2024. # MayorTom4815 , 2024. # Jesús Arriaza , 2024. # Simja 82 , 2024. # Keider Kaize , 2024. # Valentben , 2024. # Alexander Diego , 2024. # José Andrés Urdaneta , 2025. # LuisGFlorez , 2025. # Luis Angel , 2025. # Rodrigo Pizarro , 2025. # Hompis Homp , 2025, 2026. # JoseLL8 <100429024@alumnos.uc3m.es>, 2025. # Joshue Garcia , 2025. # Myeongjin , 2025. # Juan Segundo , 2025. # Sandy , 2025. # David , 2025. # Yhaliff Said Barraza Zubia , 2025, 2026. # samidare20 , 2025. # Zelta , 2025. # Juan Gutierrez , 2025. # Julio Osmar , 2025. # Randall madrigal , 2025. # Micky , 2025. # Albert Lacarta , 2025. # Antonio SysPro , 2025. # 🍁 , 2025. # Julián Lacomba , 2025. # Nadie , 2025, 2026. # Chen Romero Juárez , 2025. # "Santiago Leonardo L." , 2025. # iker-sr , 2025. # zozelfelfo , 2026. # topdown5559 , 2026. # Xavier Ortiz Quintana , 2026. # Vi , 2026. # OAK JAVIER , 2026. # Josué Cedeño , 2026. # oscariolo , 2026. # Tuerto Dopado , 2026. # Eric Lael Vasquez Carreño , 2026. # "Josep Alejandro (Josep)" , 2026. # ZHYN , 2026. # Juan José Arcila Valderrama , 2026. # AnthonyM , 2026. # Yunior Alejandro Tápanes Martín , 2026. # Gino Tombesi , 2026. # Ander 'Laquin' Aginaga San Sebastián , 2026. msgid "" msgstr "" "Project-Id-Version: Godot Engine class reference\n" "Report-Msgid-Bugs-To: https://github.com/godotengine/godot\n" "PO-Revision-Date: 2026-06-09 08:31+0000\n" "Last-Translator: Rémi Verschelde \n" "Language-Team: Spanish \n" "Language: es\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8-bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Generator: Weblate 2026.6\n" msgid "All classes" msgstr "Todas las clases" msgid "Globals" msgstr "Globales" msgid "Nodes" msgstr "Nodos" msgid "Resources" msgstr "Recursos" msgid "Editor-only" msgstr "Solo para el Editor" msgid "Other objects" msgstr "Otros objetos" msgid "Variant types" msgstr "Tipos Variant" msgid "Description" msgstr "Descripción" msgid "Tutorials" msgstr "Tutoriales" msgid "Properties" msgstr "Propiedades" msgid "Constructors" msgstr "Constructores" msgid "Methods" msgstr "Métodos" msgid "Operators" msgstr "Operadores" msgid "Theme Properties" msgstr "Propiedades del Tema" msgid "Signals" msgstr "Señales" msgid "Enumerations" msgstr "Enumeraciones" msgid "Constants" msgstr "Constantes" msgid "Annotations" msgstr "Anotaciones" msgid "Property Descriptions" msgstr "Descripciones de Propiedades" msgid "Constructor Descriptions" msgstr "Descripciones de Constructores" msgid "Method Descriptions" msgstr "Descripciones de Métodos" msgid "Operator Descriptions" msgstr "Descripciones de Operadores" msgid "Theme Property Descriptions" msgstr "Descripciones de las propiedades del tema" msgid "Inherits:" msgstr "Hereda:" msgid "Inherited By:" msgstr "Heredado por:" msgid "(overrides %s)" msgstr "(sobrescribe %s)" msgid "Default" msgstr "Predeterminado" msgid "Setter" msgstr "Setter" msgid "value" msgstr "valor" msgid "Getter" msgstr "Getter" msgid "" "This method should typically be overridden by the user to have any effect." msgstr "" "Normalmente, este método debería ser sobreescrito por el usuario para que " "tenga algún efecto." msgid "" "This method has no side effects. It doesn't modify any of the instance's " "member variables." msgstr "" "Este método no tiene efectos secundarios. No modifica ninguna de las " "variables miembro de la instancia." msgid "" "This method accepts any number of arguments after the ones described here." msgstr "" "Este método permite agregar cualquier número de argumentos después de los " "descritos aquí." msgid "This method is used to construct a type." msgstr "Este método se utiliza para construir un tipo." msgid "" "This method doesn't need an instance to be called, so it can be called " "directly using the class name." msgstr "" "Este método no necesita una instancia para ser llamado, por lo que puede " "llamarse directamente utilizando el nombre de la clase." msgid "" "This method describes a valid operator to use with this type as left-hand " "operand." msgstr "" "Este método describe un operador válido para usar con este tipo como operando " "izquierdo." msgid "This value is an integer composed as a bitmask of the following flags." msgstr "" "Este valor es un entero compuesto como una máscara de bits de las siguientes " "banderas." msgid "No return value." msgstr "Sin valor de retorno." msgid "" "There is currently no description for this class. Please help us " "by :ref:`contributing one `!" msgstr "" "Actualmente no hay una descripción para esta clase. ¡Por favor " "ayúdanos :ref:`contribuyendo con una `!" msgid "" "There is currently no description for this signal. Please help us " "by :ref:`contributing one `!" msgstr "" "Actualmente no hay una descripción para esta señal. ¡Por favor " "ayúdanos :ref:`contribuyendo con una `!" msgid "" "There is currently no description for this enum. Please help us " "by :ref:`contributing one `!" msgstr "" "Actualmente no hay una descripción para este enum. ¡Por favor " "ayúdanos :ref:`contribuyendo con una `!" msgid "" "There is currently no description for this constant. Please help us " "by :ref:`contributing one `!" msgstr "" "Actualmente no hay una descripción para esta constante. ¡Por favor " "ayúdanos :ref:`contribuyendo con una `!" msgid "" "There is currently no description for this annotation. Please help us " "by :ref:`contributing one `!" msgstr "" "Actualmente no hay una descripción para esta anotación. ¡Por favor " "ayúdanos :ref:`contribuyendo con una `!" msgid "" "There is currently no description for this property. Please help us " "by :ref:`contributing one `!" msgstr "" "Actualmente no hay una descripción para esta propiedad. ¡Por favor " "ayúdanos :ref:`contribuyendo con una `!" msgid "" "There is currently no description for this constructor. Please help us " "by :ref:`contributing one `!" msgstr "" "Actualmente no hay una descripción para este constructor. ¡Por favor " "ayúdanos :ref:`contribuyendo con una `!" msgid "" "There is currently no description for this method. Please help us " "by :ref:`contributing one `!" msgstr "" "Actualmente no hay una descripción para este método. ¡Por favor " "ayúdanos :ref:`contribuyendo con una `!" msgid "" "There is currently no description for this operator. Please help us " "by :ref:`contributing one `!" msgstr "" "Actualmente no hay una descripción para este operador. ¡Por favor " "ayúdanos :ref:`contribuyendo con una `!" msgid "" "There is currently no description for this theme property. Please help us " "by :ref:`contributing one `!" msgstr "" "Actualmente, no hay una descripción para esta propiedad del tema. ¡Por favor " "ayúdanos :ref:`contribuyendo con una `!" msgid "" "There are notable differences when using this API with C#. " "See :ref:`doc_c_sharp_differences` for more information." msgstr "" "Hay diferencias notables cuando usa esta API con C#. " "Véase :ref:`doc_c_sharp_differences` para más información." msgid "Deprecated:" msgstr "Obsoleto:" msgid "Experimental:" msgstr "Experimental:" msgid "This signal may be changed or removed in future versions." msgstr "Esta señal podría ser modificada o eliminada en versiones futuras." msgid "This constant may be changed or removed in future versions." msgstr "Esta constante podría ser modificada o eliminada en versiones futuras." msgid "This property may be changed or removed in future versions." msgstr "Esta propiedad podría ser modificada o eliminada en versiones futuras." msgid "This constructor may be changed or removed in future versions." msgstr "" "Este constructor podría ser modificado o eliminado en versiones futuras." msgid "This method may be changed or removed in future versions." msgstr "Este método podría ser modificado o eliminado en versiones futuras." msgid "This operator may be changed or removed in future versions." msgstr "Este operador podría ser modificado o eliminado en versiones futuras." msgid "This theme property may be changed or removed in future versions." msgstr "" "Esta propiedad de tema podría ser modificada o eliminada en versiones futuras." msgid "Built-in GDScript constants, functions, and annotations." msgstr "Constantes, funciones y anotaciones de GDScript integradas." msgid "" "A list of utility functions and annotations accessible from any script " "written in GDScript.\n" "For the list of global functions and constants that can be accessed in any " "scripting language, see [@GlobalScope]." msgstr "" "Una lista de funciones de utilidad y anotaciones específicas de GDScript, " "accesibles desde cualquier script escrito en GDScript.\n" "Para obtener la lista de funciones globales y constantes a las que se puede " "acceder desde cualquier lenguaje de scripting, Véase [@GlobalScope]." msgid "GDScript exports" msgstr "Exportaciones de GDScript" msgid "Use [method Color.from_rgba8] instead." msgstr "Utiliza [method Color.from_rgba8] en su lugar." msgid "" "Returns a [Color] constructed from red ([param r8]), green ([param g8]), blue " "([param b8]), and optionally alpha ([param a8]) integer channels, each " "divided by [code]255.0[/code] for their final value. Using [method Color8] " "instead of the standard [Color] constructor is useful when you need to match " "exact color values in an [Image].\n" "[codeblock]\n" "var red = Color8(255, 0, 0) # Same as Color(1, 0, 0).\n" "var dark_blue = Color8(0, 0, 51) # Same as Color(0, 0, 0.2).\n" "var my_color = Color8(306, 255, 0, 102) # Same as Color(1.2, 1, 0, 0.4).\n" "[/codeblock]\n" "[b]Note:[/b] Due to the lower precision of [method Color8] compared to the " "standard [Color] constructor, a color created with [method Color8] will " "generally not be equal to the same color created with the standard [Color] " "constructor. Use [method Color.is_equal_approx] for comparisons to avoid " "issues with floating-point precision error." msgstr "" "Devuelve un [Color] construido a partir de rojo ([param r8]), verde ([param " "g8]), azul ([param b8]) y opcionalmente alfa ([param a8]), cada uno dividido " "entre [code]255.0[/code] para obtener su valor final. Usar [method Color8] en " "vez del constructor estándar [Color] es útil cuando se necesita hacer " "coincidir exactamente los valores de color en una [Image].\n" "[codeblock]\n" "var red = Color8(255, 0, 0) • • • • • • • • • • • # Igual que Color(1, 0, 0)\n" "var dark_blue = Color8(0, 0, 51) • • • • • • # Igual que Color(0, 0, 0.2).\n" "var my_color = Color8(306, 255, 0, 102) # Igual que Color(1.2, 1, 0, 0.4).\n" "[/codeblock]\n" "[b]Nota:[/b] Debido a la baja precisión de [method Color8] comparada con la " "del constructor estándar [Color], un color creado con [method Color8] " "generalmente no será igual al mismo color creado con el constructor [Color] " "estándar. Utiliza [method Color.is_equal_approx] para hacer comparaciones y " "evitar problemas con errores de precisión de punto flotante." msgid "" "Returns a single character (as a [String] of length 1) of the given Unicode " "code point [param code].\n" "[codeblock]\n" "print(char(65)) # Prints \"A\"\n" "print(char(129302)) # Prints \"🤖\" (robot face emoji)\n" "[/codeblock]\n" "This is the inverse of [method ord]. See also [method String.chr] and [method " "String.unicode_at]." msgstr "" "Devuelve un único carácter (como un [String] de longitud 1) del punto de " "código Unicode [param code] dado.\n" "[codeblock]\n" "print(char(65)) # Imprime \"A\"\n" "print(char(129302)) # Imprime \"🤖\" (emoji de cara de robot)\n" "[/codeblock]\n" "Esta es la inversa de [method ord]. Véase también [method String.chr] y " "[method String.unicode_at]." msgid "Use [method @GlobalScope.type_convert] instead." msgstr "Utiliza [method @GlobalScope.type_convert] en su lugar." msgid "" "Converts [param what] to [param type] in the best way possible. The [param " "type] uses the [enum Variant.Type] values.\n" "[codeblock]\n" "var a = [4, 2.5, 1.2]\n" "print(a is Array) # Prints true\n" "\n" "var b = convert(a, TYPE_PACKED_BYTE_ARRAY)\n" "print(b) # Prints [4, 2, 1]\n" "print(b is Array) # Prints false\n" "[/codeblock]" msgstr "" "Convierte [param what] a [param type] de la mejor forma posible. El [param " "type] usa los valores de [enum Variant.Type].\n" "[codeblock]\n" "var a = [4, 2.5, 1.2]\n" "print(a is Array) # Imprime true\n" "\n" "var b = convert(a, TYPE_PACKED_BYTE_ARRAY)\n" "print(b) # Imprime [4, 2, 1]\n" "print(b is Array) # Imprime false\n" "[/codeblock]" msgid "" "Consider using [method JSON.to_native] or [method Object.get_property_list] " "instead." msgstr "" "Considera usar [method JSON.to_native] o [method Object.get_property_list] en " "su lugar." msgid "" "Converts a [param dictionary] (created with [method inst_to_dict]) back to an " "Object instance. Can be useful for deserializing." msgstr "" "Convierte un [param dictionary] (creado con [method inst_to_dict]) en una " "instancia de objeto. Puede ser útil para deserializar datos." msgid "" "Returns an array of dictionaries representing the current call stack.\n" "[codeblock]\n" "func _ready():\n" "\tfoo()\n" "\n" "func foo():\n" "\tbar()\n" "\n" "func bar():\n" "\tprint(get_stack())\n" "[/codeblock]\n" "Starting from [code]_ready()[/code], [code]bar()[/code] would print:\n" "[codeblock lang=text]\n" "[{function:bar, line:12, source:res://script.gd}, {function:foo, line:9, " "source:res://script.gd}, {function:_ready, line:6, source:res://script.gd}]\n" "[/codeblock]\n" "See also [method print_debug], [method print_stack], and [method " "Engine.capture_script_backtraces].\n" "[b]Note:[/b] By default, backtraces are only available in editor builds and " "debug builds. To enable them for release builds as well, you need to enable " "[member ProjectSettings.debug/settings/gdscript/always_track_call_stacks]." msgstr "" "Devuelve un array de diccionarios que representan la pila de llamadas " "actual.\n" "[codeblock]\n" "func _ready():\n" "\tfoo()\n" "\n" "func foo():\n" "\tbar()\n" "\n" "func bar():\n" "\tprint(get_stack())\n" "[/codeblock]\n" "Empezando desde [code]_ready()[/code], [code]bar()[/code] esto imprimirá:\n" "[codeblock lang=text]\n" "[{function:bar, line:12, source:res://script.gd}, {function:foo, line:9, " "source:res://script.gd}, {function:_ready, line:6, source:res://script.gd}]\n" "[/codeblock]\n" "Véase también [method print_debug], [method print_stack] y [method " "Engine.capture_script_backtraces].\n" "[b]Nota:[/b] Por defecto, los \"backtraces\" solo están disponibles en " "compilaciones de editor y compilaciones de depuración. Para habilitarlos " "también para compilaciones de lanzamiento, debes habilitar [member " "ProjectSettings.debug/settings/gdscript/always_track_call_stacks]." msgid "" "Consider using [method JSON.from_native] or [method Object.get_property_list] " "instead." msgstr "" "Considera usar [method JSON.from_native] o [method Object.get_property_list] " "en su lugar." msgid "" "Returns the passed [param instance] converted to a [Dictionary]. Can be " "useful for serializing.\n" "[codeblock]\n" "var foo = \"bar\"\n" "func _ready():\n" "\tvar d = inst_to_dict(self)\n" "\tprint(d.keys())\n" "\tprint(d.values())\n" "[/codeblock]\n" "Prints out:\n" "[codeblock lang=text]\n" "[@subpath, @path, foo]\n" "[, res://test.gd, bar]\n" "[/codeblock]\n" "[b]Note:[/b] This function can only be used to serialize objects with an " "attached [GDScript] stored in a separate file. Objects without an attached " "script, with a script written in another language, or with a built-in script " "are not supported.\n" "[b]Note:[/b] This function is not recursive, which means that nested objects " "will not be represented as dictionaries. Also, properties passed by reference " "([Object], [Dictionary], [Array], and packed arrays) are copied by reference, " "not duplicated." msgstr "" "Devuelve la instancia [param instance] convertida a un [Dictionary]. Puede " "ser útil para la serialización.\n" "[codeblock]\n" "var foo = \"bar\"\n" "func _ready():\n" "\tvar d = inst_to_dict(self)\n" "\tprint(d.keys())\n" "\tprint(d.values())\n" "[/codeblock]\n" "Imprime:\n" "[codeblock lang=text]\n" "[@subpath, @path, foo]\n" "[, res://test.gd, bar]\n" "[/codeblock]\n" "[b]Nota:[/b] Esta función sólo se puede utilizar para serializar objetos con " "un [GDScript] adjunto almacenado en un archivo independiente. No están " "soportados objetos sin un script adjunto, con un script escrito en otro " "lenguaje o con un script integrado.\n" "[b]Nota:[/b] Esta función no es recursiva, lo que significa que los objetos " "anidados no se representarán como diccionarios. Además, las propiedades " "pasadas por referencia ([Object], [Dictionary], [Array] y arrays " "empaquetados) se copian por referencia, no duplicadas." msgid "" "Returns the length of the given Variant [param var]. The length can be the " "character count of a [String] or [StringName], the element count of any array " "type, or the size of a [Dictionary]. For every other Variant type, a run-time " "error is generated and execution is stopped.\n" "[codeblock]\n" "var a = [1, 2, 3, 4]\n" "len(a) # Returns 4\n" "\n" "var b = \"Hello!\"\n" "len(b) # Returns 6\n" "[/codeblock]" msgstr "" "Devuelve la longitud del [param var] Variant dado. La longitud puede ser el " "recuento de caracteres de un [String] o [StringName], el recuento de " "elementos de cualquier tipo de array, o el tamaño de un [Dictionary]. Para " "cualquier otro tipo de Variant, se genera un error en tiempo de ejecución y " "se detiene la ejecución.\n" "[codeblock]\n" "var a = [1, 2, 3, 4]\n" "len(a) # Devuelve 4\n" "\n" "var b = \"¡Hola!\"\n" "len(b) # Devuelve 6\n" "[/codeblock]" msgid "" "Returns a [Resource] from the filesystem located at the absolute [param " "path]. Unless it's already referenced elsewhere (such as in another script or " "in the scene), the resource is loaded from disk on function call, which might " "cause a slight delay, especially when loading large scenes. To avoid " "unnecessary delays when loading something multiple times, either store the " "resource in a variable or use [method preload]. This method is equivalent of " "using [method ResourceLoader.load] with [constant " "ResourceLoader.CACHE_MODE_REUSE].\n" "[b]Note:[/b] Resource paths can be obtained by right-clicking on a resource " "in the FileSystem dock and choosing \"Copy Path\", or by dragging the file " "from the FileSystem dock into the current script.\n" "[codeblock]\n" "# Load a scene called \"main\" located in the root of the project directory " "and cache it in a variable.\n" "var main = load(\"res://main.tscn\") # main will contain a PackedScene " "resource.\n" "[/codeblock]\n" "[b]Important:[/b] Relative paths are [i]not[/i] relative to the script " "calling this method, instead it is prefixed with [code]\"res://\"[/code]. " "Loading from relative paths might not work as expected.\n" "This function is a simplified version of [method ResourceLoader.load], which " "can be used for more advanced scenarios.\n" "[b]Note:[/b] Files have to be imported into the engine first to load them " "using this function. If you want to load [Image]s at run-time, you may use " "[method Image.load]. If you want to import audio files, you can use the " "snippet described in [member AudioStreamMP3.data].\n" "[b]Note:[/b] If [member ProjectSettings.editor/export/" "convert_text_resources_to_binary] is [code]true[/code], [method " "@GDScript.load] will not be able to read converted files in an exported " "project. If you rely on run-time loading of files present within the PCK, set " "[member ProjectSettings.editor/export/convert_text_resources_to_binary] to " "[code]false[/code]." msgstr "" "Devuelve un [Resource] del sistema de archivos ubicado en la ruta absoluta " "[param path]. A menos que ya esté referenciado en otro lugar (como en otro " "script o en la escena), el recurso se carga desde el disco en la llamada a la " "función, lo que podría causar un ligero retraso, especialmente al cargar " "escenas grandes. Para evitar retrasos innecesarios al cargar algo varias " "veces, almacena el recurso en una variable o usa [method preload]. Este " "método es equivalente a usar [method ResourceLoader.load] con [constant " "ResourceLoader.CACHE_MODE_REUSE].\n" "[b]Nota:[/b] Las rutas de los recursos se pueden obtener haciendo clic " "derecho sobre un recurso en el panel FileSystem y eligiendo \"Copiar ruta\", " "o arrastrando el archivo desde el panel FileSystem al script actual.\n" "[codeblock]\n" "# Carga una escena llamada \"main\" ubicada en la raíz del directorio del " "proyecto y la almacena en una variable.\n" "var main = load(\"res://main.tscn\") # main contendrá un recurso " "PackedScene.\n" "[/codeblock]\n" "[b]Importante:[/b] Las rutas relativas [i]no[/i] son relativas al script que " "llama a este método, sino que están prefijadas con [code]\"res://\"[/code]. " "Cargar desde rutas relativas puede no funcionar como se espera.\n" "Esta función es una versión simplificada de [method ResourceLoader.load], que " "puede usarse para escenarios más avanzados.\n" "[b]Nota:[/b] Los archivos deben importarse primero en el motor para poder " "cargarlos usando esta función. Si deseas cargar [Image]s en tiempo de " "ejecución, puedes usar [method Image.load]. Si deseas importar archivos de " "audio, puedes usar el fragmento descrito en [member AudioStreamMP3.data].\n" "[b]Nota:[/b] Si [member ProjectSettings.editor/export/" "convert_text_resources_to_binary] está configurado como [code]true[/code], " "[method @GDScript.load] no podrá leer los archivos convertidos en un proyecto " "exportado. Si dependes de la carga en tiempo de ejecución de archivos " "presentes dentro del PCK, configura [member ProjectSettings.editor/export/" "convert_text_resources_to_binary] como [code]false[/code]." msgid "" "Returns an integer representing the Unicode code point of the given character " "[param char], which should be a string of length 1.\n" "[codeblock]\n" "print(ord(\"A\")) # Prints 65\n" "print(ord(\"🤖\")) # Prints 129302\n" "[/codeblock]\n" "This is the inverse of [method char]. See also [method String.chr] and " "[method String.unicode_at]." msgstr "" "Devuelve un entero que representa el punto de código Unicode del carácter " "[param char] dado, que debe ser una string de longitud 1.\n" "[codeblock]\n" "print(ord(\"A\")) # Imprime 65\n" "print(ord(\"🤖\")) # Imprime 129302\n" "[/codeblock]\n" "Esta es la inversa de [method char]. Véase también [method String.chr] y " "[method String.unicode_at]." msgid "" "Returns a [Resource] from the filesystem located at [param path]. During run-" "time, the resource is loaded when the script is being parsed. This function " "effectively acts as a reference to that resource. Note that this function " "requires [param path] to be a constant [String]. If you want to load a " "resource from a dynamic/variable path, use [method load].\n" "[b]Note:[/b] Resource paths can be obtained by right-clicking on a resource " "in the Assets Panel and choosing \"Copy Path\", or by dragging the file from " "the FileSystem dock into the current script.\n" "[codeblock]\n" "# Create instance of a scene.\n" "var diamond = preload(\"res://diamond.tscn\").instantiate()\n" "[/codeblock]\n" "[b]Note:[/b] [method preload] is a keyword, not a function. So you cannot " "access it as a [Callable]." msgstr "" "Devuelve un [Resource] del sistema de archivos ubicado en la ruta [param " "path]. En tiempo de ejecución, el recurso se carga durante el análisis " "sintáctico del script. Esta función efectivamente actúa como una referencia a " "ese recurso. Ten en cuenta que el método requiere que [param path] sea una " "constante [String]. Si deseas cargar un recurso de una ruta dinámica/" "variable, utiliza [method load].\n" "[b]Nota:[/b] Las rutas de los recursos se pueden obtener haciendo clic con el " "botón derecho del ratón en un recurso del panel FileSystem y eligiendo " "\"Copiar Ruta\" o arrastrando el archivo desde el panel al script.\n" "[codeblock]\n" "# Crea la instancia de una escena.\n" "var diamante = preload(\"res://diamante.tscn\").instantiate()\n" "[/codeblock]\n" "[b]Nota:[/b] [method preload] es una palabra reservada, no una función. Por " "lo que no la puedes usar como una [Callable]." msgid "" "Like [method @GlobalScope.print], but includes the current stack frame when " "running with the debugger turned on.\n" "The output in the console may look like the following:\n" "[codeblock lang=text]\n" "Test print\n" "At: res://test.gd:15:_process()\n" "[/codeblock]\n" "See also [method print_stack], [method get_stack], and [method " "Engine.capture_script_backtraces].\n" "[b]Note:[/b] By default, backtraces are only available in editor builds and " "debug builds. To enable them for release builds as well, you need to enable " "[member ProjectSettings.debug/settings/gdscript/always_track_call_stacks]." msgstr "" "Similar a [method @GlobalScope.print], pero incluye el marco de pila actual " "cuando se ejecuta con el depurador activado.\n" "La salida en la consola puede verse así:\n" "[codeblock lang=text]\n" "Test print\n" "At: res://test.gd:15:_process()\n" "[/codeblock]\n" "Véase también [method print_stack], [method get_stack] y [method " "Engine.capture_script_backtraces].\n" "[b]Nota:[/b] De forma predeterminada, los \"backtraces\" solo están " "disponibles en compilaciones de editor y compilaciones de depuración. Para " "habilitarlos también para compilaciones de lanzamiento, debes habilitar " "[member ProjectSettings.debug/settings/gdscript/always_track_call_stacks]." msgid "" "Prints a stack trace at the current code location.\n" "The output in the console may look like the following:\n" "[codeblock lang=text]\n" "Frame 0 - res://test.gd:16 in function '_process'\n" "[/codeblock]\n" "See also [method print_debug], [method get_stack], and [method " "Engine.capture_script_backtraces].\n" "[b]Note:[/b] By default, backtraces are only available in editor builds and " "debug builds. To enable them for release builds as well, you need to enable " "[member ProjectSettings.debug/settings/gdscript/always_track_call_stacks]." msgstr "" "Imprime un stack trace en la ubicación actual del código.\n" "La salida en la consola puede verse de la siguiente manera:\n" "[codeblock lang=text]\n" "Frame 0 - res://test.gd:16 in function '_process'\n" "[/codeblock]\n" "Véase también [method print_debug], [method get_stack] y [method " "Engine.capture_script_backtraces].\n" "[b]Nota:[/b] Por defecto, los backtraces solo están disponibles en las " "compilaciones del editor y compilaciones de depuración. Para habilitarlos " "también en las compilaciones de lanzamiento, debes activar [member " "ProjectSettings.debug/settings/gdscript/always_track_call_stacks]." msgid "" "Returns an array with the given range. [method range] can be called in three " "ways:\n" "[code]range(n: int)[/code]: Starts from 0, increases by steps of 1, and stops " "[i]before[/i] [code]n[/code]. The argument [code]n[/code] is [b]exclusive[/" "b].\n" "[code]range(b: int, n: int)[/code]: Starts from [code]b[/code], increases by " "steps of 1, and stops [i]before[/i] [code]n[/code]. The arguments [code]b[/" "code] and [code]n[/code] are [b]inclusive[/b] and [b]exclusive[/b], " "respectively.\n" "[code]range(b: int, n: int, s: int)[/code]: Starts from [code]b[/code], " "increases/decreases by steps of [code]s[/code], and stops [i]before[/i] " "[code]n[/code]. The arguments [code]b[/code] and [code]n[/code] are " "[b]inclusive[/b] and [b]exclusive[/b], respectively. The argument [code]s[/" "code] [b]can[/b] be negative, but not [code]0[/code]. If [code]s[/code] is " "[code]0[/code], an error message is printed.\n" "[method range] converts all arguments to [int] before processing.\n" "[b]Note:[/b] Returns an empty array if no value meets the value constraint " "(e.g. [code]range(2, 5, -1)[/code] or [code]range(5, 5, 1)[/code]).\n" "[b]Examples:[/b]\n" "[codeblock]\n" "print(range(4)) # Prints [0, 1, 2, 3]\n" "print(range(2, 5)) # Prints [2, 3, 4]\n" "print(range(0, 6, 2)) # Prints [0, 2, 4]\n" "print(range(4, 1, -1)) # Prints [4, 3, 2]\n" "[/codeblock]\n" "To iterate over an [Array] backwards, use:\n" "[codeblock]\n" "var array = [3, 6, 9]\n" "for i in range(array.size() - 1, -1, -1):\n" "\tprint(array[i])\n" "[/codeblock]\n" "Output:\n" "[codeblock lang=text]\n" "9\n" "6\n" "3\n" "[/codeblock]\n" "To iterate over [float], convert them in the loop.\n" "[codeblock]\n" "for i in range (3, 0, -1):\n" "\tprint(i / 10.0)\n" "[/codeblock]\n" "Output:\n" "[codeblock lang=text]\n" "0.3\n" "0.2\n" "0.1\n" "[/codeblock]" msgstr "" "Devuelve un array con el rango indicado. El [method range] se puede llamar de " "tres maneras:\n" "[code]range(n: int)[/code]: Comienza desde 0, aumenta en pasos de 1 y se " "detiene [i]antes[/i] de [code]n[/code]. El argumento [code]n[/code] es " "[b]exclusivo[/b].\n" "[code]range(b: int, n: int)[/code]: Comienza desde [code]b[/code], aumenta en " "pasos de 1 y se detiene [i]antes[/i] de [code]n[/code]. Los argumentos " "[code]b[/code] y [code]n[/code] son [b]inclusivos[/b] y [b]exclusivos[/b], " "respectivamente.\n" "[code]range(b: int, n: int, s: int)[/code]: Comienza en [code]b[/code], " "aumenta/disminuye en pasos de [code]s[/code] y se detiene [i]antes[/i] de " "[code]n[/code]. Los argumentos [code]b[/code] y [code]n[/code] son " "[b]inclusivos[/b] y [b]exclusivos[/b], respectivamente. El argumento [code]s[/" "code] [b]puede[/b] ser negativo, pero no [code]0[/code]. Si [code]s[/code] es " "[code]0[/code], se muestra un mensaje de error.\n" "[method range] convierte todos los argumentos a [int] antes del " "procesamiento.\n" "[b]Nota:[/b] Devuelve un array vacío si ningún valor cumple la restricción de " "valor (p. ej., [code]range(2, 5, -1)[/code] o [code]range(5, 5, 1)[/code]).\n" "[b]Ejemplos:[/b]\n" "[codeblock]\n" "print(range(4)) # Imprime [0, 1, 2, 3]\n" "print(range(2, 5)) # Imprime [2, 3, 4]\n" "print(range(0, 6, 2)) # Imprime [0, 2, 4]\n" "print(range(4, 1, -1)) # Imprime [4, 3, 2]\n" "[/codeblock]\n" "Para iterar sobre un [Array] hacia atrás, use:\n" "[codeblock]\n" "var array = [3, 6, 9]\n" "for i in range(array.size() - 1, -1, -1):\n" "\tprint(array[i])\n" "[/codeblock]\n" "Resultado:\n" "[codeblock lang=text]\n" "9\n" "6\n" "3\n" "[/codeblock]\n" "Para iterar sobre [float], conviértelos en el bucle.\n" "[codeblock]\n" "for i in range(3, 0, -1):\n" "\tprint(i / 10.0)\n" "[/codeblock]\n" "Salida:\n" "[codeblock lang=texto]\n" "0.3\n" "0.2\n" "0.1\n" "[/codeblock]" msgid "Use [method ClassDB.class_exists] instead." msgstr "Utiliza [method ClassDB.class_exists] en su lugar." msgid "" "Returns [code]true[/code] if the given [Object]-derived class exists in " "[ClassDB]. Note that [Variant] data types are not registered in [ClassDB].\n" "[codeblock]\n" "type_exists(\"Sprite2D\") # Returns true\n" "type_exists(\"NonExistentClass\") # Returns false\n" "[/codeblock]" msgstr "" "Devuelve [code] true [/code] si la clase dada existe en [ClassDB].\n" "[codeblock]\n" "type_exists(\"Sprite2D\") # Devuelve true\n" "type_exists(\"Variant\") # Devuelve false\n" "[/codeblock]" msgid "" "Constant that represents how many times the diameter of a circle fits around " "its perimeter. This is equivalent to [code]TAU / 2[/code], or 180 degrees in " "rotations." msgstr "" "Constante que representa cuántas veces el diámetro de un círculo se encuentra " "contenido en su perímetro.Esto equivale a [code]TAU / 2[/code], o 180 grados " "en rotación." msgid "" "The circle constant, the circumference of the unit circle in radians. This is " "equivalent to [code]PI * 2[/code], or 360 degrees in rotations." msgstr "" "La constante del círculo, la circunferencia de la unidad círculo en radianes. " "Esto equivale a [code]PI * 2[/code] o 360 grados en rotación." msgid "" "Positive floating-point infinity. This is the result of floating-point " "division when the divisor is [code]0.0[/code]. For negative infinity, use " "[code]-INF[/code]. Dividing by [code]-0.0[/code] will result in negative " "infinity if the numerator is positive, so dividing by [code]0.0[/code] is not " "the same as dividing by [code]-0.0[/code] (despite [code]0.0 == -0.0[/code] " "returning [code]true[/code]).\n" "[b]Warning:[/b] Numeric infinity is only a concept with floating-point " "numbers, and has no equivalent for integers. Dividing an integer number by " "[code]0[/code] will not result in [constant INF] and will result in a run-" "time error instead." msgstr "" "Infinito positivo de punto flotante. Este es el resultado de la división de " "punto flotante cuando el divisor es [code]0.0[/code]. Para infinito negativo, " "usa [code]-INF[/code]. Dividir por [code]-0.0[/code] resultará en infinito " "negativo si el numerador es positivo, por lo que dividir por [code]0.0[/code] " "no es lo mismo que dividir por [code]-0.0[/code] (a pesar de que [code]0.0 == " "-0.0[/code] devuelve [code]true[/code]).\n" "[b]Advertencia:[/b] El infinito numérico es solo un concepto aplicable a los " "números de punto flotante y no tiene equivalente para los enteros. Dividir un " "número entero entre [code]0[/code] no resultará en [constant INF] y causará " "un error en tiempo de ejecución en su lugar." msgid "" "\"Not a Number\", an invalid floating-point value. It is returned by some " "invalid operations, such as dividing floating-point [code]0.0[/code] by " "[code]0.0[/code].\n" "[constant NAN] has special properties, including that [code]!=[/code] always " "returns [code]true[/code], while other comparison operators always return " "[code]false[/code]. This is true even when comparing with itself ([code]NAN " "== NAN[/code] returns [code]false[/code] and [code]NAN != NAN[/code] returns " "[code]true[/code]). Due to this, you must use [method @GlobalScope.is_nan] to " "check whether a number is equal to [constant NAN].\n" "[b]Warning:[/b] \"Not a Number\" is only a concept with floating-point " "numbers, and has no equivalent for integers. Dividing an integer [code]0[/" "code] by [code]0[/code] will not result in [constant NAN] and will result in " "a run-time error instead." msgstr "" "\"No es un Número\", un valor de punto flotante inválido. Es devuelto por " "algunas operaciones inválidas, como dividir [code]0.0[/code] de punto " "flotante entre [code]0.0[/code].\n" "[constant NAN] tiene propiedades especiales, incluyendo que [code]!=[/code] " "siempre devuelve [code]true[/code], mientras que los demás operadores de " "comparación siempre devuelven [code]false[/code]. Esto es cierto incluso al " "compararlo consigo mismo ([code]NAN == NAN[/code] devuelve [code]false[/code] " "y [code]NAN != NAN[/code] devuelve [code]true[/code]).\n" "[b]Advertencia:[/b] \"No es un Número\" es solo un concepto aplicable a los " "números de punto flotante y no tiene equivalente para los enteros. Dividir un " "entero [code]0[/code] entre [code]0[/code] no resultará en [constant NAN] y " "causará un error en tiempo de ejecución en su lugar." msgid "" "Marks a class or a method as abstract.\n" "An abstract class is a class that cannot be instantiated directly. Instead, " "it is meant to be inherited by other classes. Attempting to instantiate an " "abstract class will result in an error.\n" "An abstract method is a method that has no implementation. Therefore, a " "newline or a semicolon is expected after the function header. This defines a " "contract that inheriting classes must conform to, because the method " "signature must be compatible when overriding.\n" "Inheriting classes must either provide implementations for all abstract " "methods, or the inheriting class must be marked as abstract. If a class has " "at least one abstract method (either its own or an unimplemented inherited " "one), then it must also be marked as abstract. However, the reverse is not " "true: an abstract class is allowed to have no abstract methods.\n" "[codeblock]\n" "@abstract class Shape:\n" "\t@abstract func draw()\n" "\n" "class Circle extends Shape:\n" "\tfunc draw():\n" "\t\tprint(\"Drawing a circle.\")\n" "\n" "class Square extends Shape:\n" "\tfunc draw():\n" "\t\tprint(\"Drawing a square.\")\n" "[/codeblock]" msgstr "" "Marca una clase o un método como abstracto.\n" "Una clase abstracta es una clase que no puede ser instanciada directamente. " "En cambio, está hecha para ser heredada por otras clases. Intentar instanciar " "una clase abstracta resultará en un error.\n" "Un método abstracto es un método que no tiene implementación. De esa manera, " "una nueva línea o punto y coma se espera después de la cabeza de la función. " "Esto define un contrato al que las clases herederas deben ceñirse, porque la " "firma del método debe ser compatible al sobrescribir.\n" "Las clases herederas deben proveer implementaciones para todos los métodos " "abstractos, o marcarse como abstractas también. Si una clase tiene al menos " "un método abstracto (o suyo propio o uno heredado no implementado), entonces " "debe ser marcado como abstracto también. Sin embargo, lo contrario no es " "verdad: una clase abstracta puede no tener métodos abstractos.\n" "[codeblock]\n" "@abstract class Shape:\n" "\t@abstract func draw()\n" "\n" "class Circle extends Shape:\n" "\tfunc draw():\n" "\t\tprint(\"Dibujando un círculo.\")\n" "\n" "class Square extends Shape:\n" "\tfunc draw():\n" "\t\tprint(\"Dibujando un cuadrado.\")\n" "[/codeblock]" msgid "" "Mark the following property as exported (editable in the Inspector dock and " "saved to disk). To control the type of the exported property, use the type " "hint notation.\n" "[codeblock]\n" "extends Node\n" "\n" "enum Direction {LEFT, RIGHT, UP, DOWN}\n" "\n" "# Built-in types.\n" "@export var string = \"\"\n" "@export var int_number = 5\n" "@export var float_number: float = 5\n" "\n" "# Enums.\n" "@export var type: Variant.Type\n" "@export var format: Image.Format\n" "@export var direction: Direction\n" "\n" "# Resources.\n" "@export var image: Image\n" "@export var custom_resource: CustomResource\n" "\n" "# Nodes.\n" "@export var node: Node\n" "@export var custom_node: CustomNode\n" "\n" "# Typed arrays.\n" "@export var int_array: Array[int]\n" "@export var direction_array: Array[Direction]\n" "@export var image_array: Array[Image]\n" "@export var node_array: Array[Node]\n" "[/codeblock]\n" "[b]Note:[/b] Custom resources and nodes should be registered as global " "classes using [code]class_name[/code], since the Inspector currently only " "supports global classes. Otherwise, a less specific type will be exported " "instead.\n" "[b]Note:[/b] Node export is only supported in [Node]-derived classes and has " "a number of other limitations." msgstr "" "Marca la siguiente propiedad como exportada (editable en el panel Inspector y " "guardada en disco). Para controlar el tipo de la propiedad exportada, utiliza " "la notación de sugerencia de tipo.\n" "[codeblock]\n" "extends Node\n" "\n" "enum Direction {LEFT, RIGHT, UP, DOWN}\n" "\n" "# Tipos integrados.\n" "@export var string = \"\"\n" "@export var int_number = 5\n" "@export var float_number: float = 5\n" "\n" "# Enumeraciones.\n" "@export var type: Variant.Type\n" "@export var format: Image.Format\n" "@export var direction: Direction\n" "\n" "# Recursos.\n" "@export var image: Image\n" "@export var custom_resource: CustomResource\n" "\n" "# Nodos.\n" "@export var node: Node\n" "@export var custom_node: CustomNode\n" "\n" "# Arrays tipados.\n" "@export var int_array: Array[int]\n" "@export var direction_array: Array[Direction]\n" "@export var image_array: Array[Image]\n" "@export var node_array: Array[Node]\n" "[/codeblock]\n" "[b]Nota:[/b] Los recursos y nodos personalizados deben registrarse como " "clases globales utilizando [code]class_name[/code], ya que el Inspector " "actualmente solo admite clases globales. De lo contrario, se exportará un " "tipo menos específico.\n" "[b]Nota:[/b] La exportación de nodos solo está soportada en clases derivadas " "de [Node] y tiene varias limitaciones adicionales." msgid "" "Define a new category for the following exported properties. This helps to " "organize properties in the Inspector dock.\n" "See also [constant PROPERTY_USAGE_CATEGORY].\n" "[codeblock]\n" "@export_category(\"Statistics\")\n" "@export var hp = 30\n" "@export var speed = 1.25\n" "[/codeblock]\n" "[b]Note:[/b] Categories in the Inspector dock's list usually divide " "properties coming from different classes (Node, Node2D, Sprite, etc.). For " "better clarity, it's recommended to use [annotation @export_group] and " "[annotation @export_subgroup], instead." msgstr "" "Define una nueva categoría para las siguientes propiedades exportadas. Esto " "ayuda a organizar propiedades en el panel de inspección.\n" "Véase también [constant PROPERTY_USAGE_CATEGORY].\n" "[codeblock]\n" "@export_category(\"Statistics\")\n" "@export var hp = 30\n" "@export var speed = 1.25\n" "[/codeblock]\n" "[b]Nota:[/b] Las categorías en la lista del panel de inspección usualmente " "dividen las propiedades provenientes de diferentes clases (Node, Node2D, " "Sprite, etc) . Para una mejor claridad, se recomienda usar en su lugar " "[annotation @export_group] y [annotation @export_subgroup]." msgid "" "Export a [Color], [Array][lb][Color][rb], or [PackedColorArray] property " "without allowing its transparency ([member Color.a]) to be edited.\n" "See also [constant PROPERTY_HINT_COLOR_NO_ALPHA].\n" "[codeblock]\n" "@export_color_no_alpha var dye_color: Color\n" "@export_color_no_alpha var dye_colors: Array[Color]\n" "[/codeblock]" msgstr "" "Exporta una propiedad de tipo [Color], [Array][lb][Color][rb] o " "[PackedColorArray] sin permitir que se edite su transparencia ([member " "Color.a]).\n" "Véase también [constant PROPERTY_HINT_COLOR_NO_ALPHA].\n" "[codeblock]\n" "@export_color_no_alpha var dye_color: Color\n" "@export_color_no_alpha var dye_colors: Array[Color]\n" "[/codeblock]" msgid "" "Allows you to set a custom hint, hint string, and usage flags for the " "exported property. Note that there's no validation done in GDScript, it will " "just pass the parameters to the editor.\n" "[codeblock]\n" "@export_custom(PROPERTY_HINT_NONE, \"suffix:m\") var suffix: Vector3\n" "[/codeblock]\n" "[b]Note:[/b] Regardless of the [param usage] value, the [constant " "PROPERTY_USAGE_SCRIPT_VARIABLE] flag is always added, as with any explicitly " "declared script variable." msgstr "" "Te permite establecer una sugerencia personalizada, una string de sugerencia " "y banderas de uso para la propiedad exportada. Ten en cuenta que no se " "realiza ninguna validación en GDScript, simplemente se pasarán los parámetros " "al editor.\n" "[codeblock]\n" "@export_custom(PROPERTY_HINT_NONE, \"suffix:m\") var suffix: Vector3\n" "[/codeblock]\n" "[b]Nota:[/b] Independientemente del valor de [param usage], siempre se agrega " "la bandera [constant PROPERTY_USAGE_SCRIPT_VARIABLE], como ocurre con " "cualquier variable de script declarada explícitamente." msgid "" "Export a [String], [Array][lb][String][rb], or [PackedStringArray] property " "as a path to a directory. The path will be limited to the project folder and " "its subfolders. See [annotation @export_global_dir] to allow picking from the " "entire filesystem.\n" "See also [constant PROPERTY_HINT_DIR].\n" "[codeblock]\n" "@export_dir var sprite_folder_path: String\n" "@export_dir var sprite_folder_paths: Array[String]\n" "[/codeblock]" msgstr "" "Exporta una propiedad de tipo [String], [Array][lb][String][rb] o " "[PackedStringArray] como una ruta hacia un directorio. La ruta estará " "limitada a la carpeta del proyecto y sus subcarpetas. Véase [annotation " "@export_global_dir] para permitir seleccionar desde todo el sistema de " "archivos.\n" "Véase también [constant PROPERTY_HINT_DIR].\n" "[codeblock]\n" "@export_dir var sprite_folder_path: String\n" "@export_dir var sprite_folder_paths: Array[String]\n" "[/codeblock]" msgid "" "Export an [int], [String], [Array][lb][int][rb], [Array][lb][String][rb], " "[PackedByteArray], [PackedInt32Array], [PackedInt64Array], or " "[PackedStringArray] property as an enumerated list of options (or an array of " "options). If the property is an [int], then the index of the value is stored, " "in the same order the values are provided. You can add explicit values using " "a colon. If the property is a [String], then the value is stored.\n" "See also [constant PROPERTY_HINT_ENUM].\n" "[codeblock]\n" "@export_enum(\"Warrior\", \"Magician\", \"Thief\") var character_class: int\n" "@export_enum(\"Slow:30\", \"Average:60\", \"Very Fast:200\") var " "character_speed: int\n" "@export_enum(\"Rebecca\", \"Mary\", \"Leah\") var character_name: String\n" "\n" "@export_enum(\"Sword\", \"Spear\", \"Mace\") var character_items: Array[int]\n" "@export_enum(\"double_jump\", \"climb\", \"dash\") var character_skills: " "Array[String]\n" "[/codeblock]\n" "If you want to set an initial value, you must specify it explicitly:\n" "[codeblock]\n" "@export_enum(\"Rebecca\", \"Mary\", \"Leah\") var character_name: String = " "\"Rebecca\"\n" "[/codeblock]\n" "If you want to use named GDScript enums, then use [annotation @export] " "instead:\n" "[codeblock]\n" "enum CharacterName {REBECCA, MARY, LEAH}\n" "@export var character_name: CharacterName\n" "\n" "enum CharacterItem {SWORD, SPEAR, MACE}\n" "@export var character_items: Array[CharacterItem]\n" "[/codeblock]" msgstr "" "Exporta una propiedad [int], [String], [Array][lb][int][rb], [Array][lb]" "[String][rb], [PackedByteArray], [PackedInt32Array], [PackedInt64Array], o " "[PackedStringArray] como una lista enumerada de opciones (o un array de " "opciones). Si la propiedad es un [int], entonces se guarda el índice del " "valor en el mismo orden en el que se proporcionan los valores. Se pueden " "añadir valores explícitos usando dos puntos (:). Si la propiedad es una " "[String], entonces se guarda el valor.\n" "Véase también [constant PROPERTY_HINT_ENUM].\n" "[codeblock]\n" "@export_enum(\"Warrior\", \"Magician\", \"Thief\") var character_class: int\n" "@export_enum(\"Slow:30\", \"Average:60\", \"Very Fast:200\") var " "character_speed: int\n" "@export_enum(\"Rebecca\", \"Mary\", \"Leah\") var character_name: String\n" "\n" "@export_enum(\"Sword\", \"Spear\", \"Mace\") var character_items: Array[int]\n" "@export_enum(\"double_jump\", \"climb\", \"dash\") var character_skills: " "Array[String]\n" "[/codeblock]\n" "Si queres asignar un valor inicial, lo debes especificar explícitamente:\n" "[codeblock]\n" "@export_enum(\"Rebecca\", \"Mary\", \"Leah\") var character_name: String = " "\"Rebecca\"\n" "[/codeblock]\n" "Si quieres usar enums de GDSCript con nombre, entonces en cambio usa " "[annotation @export]:\n" "[codeblock]\n" "enum CharacterName {REBECCA, MARY, LEAH}\n" "@export var character_name: CharacterName\n" "\n" "enum CharacterItem {SWORD, SPEAR, MACE}\n" "@export var character_items: Array[CharacterItem]\n" "[/codeblock]" msgid "" "Export a floating-point property with an easing editor widget. Additional " "hints can be provided to adjust the behavior of the widget. [code]" "\"attenuation\"[/code] flips the curve, which makes it more intuitive for " "editing attenuation properties. [code]\"positive_only\"[/code] limits values " "to only be greater than or equal to zero.\n" "See also [constant PROPERTY_HINT_EXP_EASING].\n" "[codeblock]\n" "@export_exp_easing var transition_speed\n" "@export_exp_easing(\"attenuation\") var fading_attenuation\n" "@export_exp_easing(\"positive_only\") var effect_power\n" "@export_exp_easing var speeds: Array[float]\n" "[/codeblock]" msgstr "" "Exporta una propiedad de punto flotante con un widget de editor suavizado. Se " "pueden añadir pistas adicionales para ajustar el comportamiento del widget. " "[code]\"attenuation\"[/code] invierte la curva, lo cual lo hace más intuitivo " "para editar las propiedades de atenuación. [code]\"positive_only\"[/code] " "limita los valores para que sólo sean iguales o mayores que cero.\n" "Véase además [constant PROPERTY_HINT_EXP_EASING].\n" "[codeblock]\n" "@export_exp_easing var transition_speed\n" "@export_exp_easing(\"attenuation\") var fading_attenuation\n" "@export_exp_easing(\"positive_only\") var effect_power\n" "@export_exp_easing var speeds: Array[float]\n" "[/codeblock]" msgid "" "Export a [String], [Array][lb][String][rb], or [PackedStringArray] property " "as a path to a file. The path will be limited to the project folder and its " "subfolders. See [annotation @export_global_file] to allow picking from the " "entire filesystem.\n" "If [param filter] is provided, only matching files will be available for " "picking.\n" "See also [constant PROPERTY_HINT_FILE].\n" "[codeblock]\n" "@export_file var sound_effect_path: String\n" "@export_file(\"*.txt\") var notes_path: String\n" "@export_file var level_paths: Array[String]\n" "[/codeblock]\n" "[b]Note:[/b] The file will be stored and referenced as UID, if available. " "This ensures that the reference is valid even when the file is moved. You can " "use [ResourceUID] methods to convert it to path." msgstr "" "Exporta una propiedad [String], [Array][lb][String][rb] o [PackedStringArray] " "como una ruta a un archivo. La ruta se limitará a la carpeta del proyecto y " "sus subcarpetas. Véase [annotation @export_global_file] para permitir la " "selección de todo el sistema de archivos.\n" "Si se proporciona [param filter], solo estarán disponibles para la selección " "los archivos coincidentes.\n" "Véase también [constant PROPERTY_HINT_FILE].\n" "[codeblock]\n" "@export_file var sound_effect_path: String\n" "@export_file(\"*.txt\") var notes_path: String\n" "@export_file var level_paths: Array[String]\n" "[/codeblock]\n" "[b]Nota:[/b] El archivo se almacenará y se hará referencia a él como UID, si " "está disponible. Esto asegura que la referencia sea válida incluso cuando el " "archivo se mueve. Puede utilizar los métodos [ResourceUID] para convertirlo " "en ruta." msgid "" "Same as [annotation @export_file], except the file will be stored as a raw " "path. This means that it may become invalid when the file is moved. If you " "are exporting a [Resource] path, consider using [annotation @export_file] " "instead." msgstr "" "Igual que [annotation @export_file], excepto que el archivo se guardará como " "una ruta sin procesar. Esto significa que puede volverse inválida cuando se " "mueva el archivo. Si está exportando una ruta de [Resource], considera usar " "[annotation @export_file] en su lugar." msgid "" "Export an integer property as a bit flag field. This allows to store several " "\"checked\" or [code]true[/code] values with one property, and comfortably " "select them from the Inspector dock.\n" "See also [constant PROPERTY_HINT_FLAGS].\n" "[codeblock]\n" "@export_flags(\"Fire\", \"Water\", \"Earth\", \"Wind\") var spell_elements = " "0\n" "[/codeblock]\n" "You can add explicit values using a colon:\n" "[codeblock]\n" "@export_flags(\"Self:4\", \"Allies:8\", \"Foes:16\") var spell_targets = 0\n" "[/codeblock]\n" "You can also combine several flags:\n" "[codeblock]\n" "@export_flags(\"Self:4\", \"Allies:8\", \"Self and Allies:12\", \"Foes:16\")\n" "var spell_targets = 0\n" "[/codeblock]\n" "[b]Note:[/b] A flag value must be at least [code]1[/code] and at most [code]2 " "** 32 - 1[/code].\n" "[b]Note:[/b] Unlike [annotation @export_enum], the previous explicit value is " "not taken into account. In the following example, A is 16, B is 2, C is 4.\n" "[codeblock]\n" "@export_flags(\"A:16\", \"B\", \"C\") var x\n" "[/codeblock]\n" "You can also use the annotation on [Array][lb][int][rb], [PackedByteArray], " "[PackedInt32Array], and [PackedInt64Array]\n" "[codeblock]\n" "@export_flags(\"Fire\", \"Water\", \"Earth\", \"Wind\") var phase_elements: " "Array[int]\n" "[/codeblock]" msgstr "" "Exporta la propiedad de un entero como un campo de banderas de bits. Esto " "permite guardar varios valores \"marcados\" o [code]true[/code] con una " "propiedad, y seleccionarlos cómodamente desde el panel del Inspector.\n" "Véase también [constant PROPERTY_HINT_FLAGS].\n" "[codeblock]\n" "@export_flags(\"Fire\", \"Water\", \"Earth\", \"Wind\") var spell_elements = " "0\n" "[/codeblock]\n" "Puedes añadir valores explícitos utilizando dos puntos:\n" "[codeblock]\n" "@export_flags(\"Self:4\", \"Allies:8\", \"Foes:16\") var spell_targets = 0\n" "[/codeblock]\n" "Pueden incluso combinarse varias banderas:\n" "[codeblock]\n" "@export_flags(\"Self:4\", \"Allies:8\", \"Self and Allies:12\", \"Foes:16\")\n" "var spell_targets = 0\n" "[/codeblock]\n" "[b]Nota:[/b] El valor de una bandera debe ser al menos [code]1[/code] y como " "máximo [code]2 ** 32 - 1[/code].\n" "[b]Nota:[/b] A diferencia de [annotation @export_enum], el valor explícito " "anterior no está tomado en cuenta. En el siguiente ejemplo, A es 16, B es 2, " "C es 4.\n" "[codeblock]\n" "@export_flags(\"A:16\", \"B\", \"C\") var x\n" "[/codeblock]\n" "También puedes usar anotaciones con los tipos [Array][lb][int][rb], " "[PackedByteArray], [PackedInt32Array], y [PackedInt64Array]\n" "[codeblock]\n" "@export_flags(\"Fire\", \"Water\", \"Earth\", \"Wind\") var phase_elements: " "Array[int]\n" "[/codeblock]" msgid "" "Export an integer property as a bit flag field for 2D navigation layers. The " "widget in the Inspector dock will use the layer names defined in [member " "ProjectSettings.layer_names/2d_navigation/layer_1].\n" "See also [constant PROPERTY_HINT_LAYERS_2D_NAVIGATION].\n" "[codeblock]\n" "@export_flags_2d_navigation var navigation_layers: int\n" "@export_flags_2d_navigation var navigation_layers_array: Array[int]\n" "[/codeblock]" msgstr "" "Exporta una propiedad entera como una bandera binaria para las capas de " "navegación 2D. El widget en el panel de Inspector usará los nombres de capas " "definidos en [member ProjectSettings.layer_names/2d_navigation/layer_1].\n" "Véase también [constant PROPERTY_HINT_LAYERS_2D_NAVIGATION].\n" "[codeblock]\n" "@export_flags_2d_navigation var navigation_layers: int\n" "@export_flags_2d_navigation var navigation_layers_array: Array[int]\n" "[/codeblock]" msgid "" "Export an integer property as a bit flag field for 2D physics layers. The " "widget in the Inspector dock will use the layer names defined in [member " "ProjectSettings.layer_names/2d_physics/layer_1].\n" "See also [constant PROPERTY_HINT_LAYERS_2D_PHYSICS].\n" "[codeblock]\n" "@export_flags_2d_physics var physics_layers: int\n" "@export_flags_2d_physics var physics_layers_array: Array[int]\n" "[/codeblock]" msgstr "" "Exporta una propiedad de tipo int como un campo de bits para las capas " "físicas 2D. El widget en el panel del Inspector usará los nombres de capa " "definidos en [member ProjectSettings.layer_names/2d_physics/layer_1].\n" "Véase también [constant PROPERTY_HINT_LAYERS_2D_PHYSICS].\n" "[codeblock]\n" "@export_flags_2d_physics var physics_layers: int\n" "@export_flags_2d_physics var physics_layers_array: Array[int]\n" "[/codeblock]" msgid "" "Export an integer property as a bit flag field for 2D render layers. The " "widget in the Inspector dock will use the layer names defined in [member " "ProjectSettings.layer_names/2d_render/layer_1].\n" "See also [constant PROPERTY_HINT_LAYERS_2D_RENDER].\n" "[codeblock]\n" "@export_flags_2d_render var render_layers: int\n" "@export_flags_2d_render var render_layers_array: Array[int]\n" "[/codeblock]" msgstr "" "Exporta un Integer como un campo de bandera de bit para las capas de " "renderizado 2D. El widget del inspector usará los nombres de capa definidos " "en [member ProjectSettings.layer_names/2d_render/layer_1].\n" "Véase también [constant PROPERTY_HINT_LAYERS_2D_RENDER].\n" "[codeblock]\n" "@export_flags_2d_render var render_layers: int\n" "@export_flags_2d_render var render_layers_array: Array[int]\n" "[/codeblock]" msgid "" "Export an integer property as a bit flag field for 3D navigation layers. The " "widget in the Inspector dock will use the layer names defined in [member " "ProjectSettings.layer_names/3d_navigation/layer_1].\n" "See also [constant PROPERTY_HINT_LAYERS_3D_NAVIGATION].\n" "[codeblock]\n" "@export_flags_3d_navigation var navigation_layers: int\n" "@export_flags_3d_navigation var navigation_layers_array: Array[int]\n" "[/codeblock]" msgstr "" "Exporta una propiedad de tipo Integer como un campo de bandera de bits para " "las capas de navegación 3D. El widget en el panel del inspector usará los " "nombres de las capas definidas en [member ProjectSettings.layer_names/" "3d_navigation/layer_1].\n" "Véase también [constant PROPERTY_HINT_LAYERS_3D_NAVIGATION].\n" "[codeblock]\n" "@export_flags_3d_navigation var navigation_layers: int\n" "@export_flags_3d_navigation var navigation_layers_array: Array[int]\n" "[/codeblock]" msgid "" "Export an integer property as a bit flag field for 3D physics layers. The " "widget in the Inspector dock will use the layer names defined in [member " "ProjectSettings.layer_names/3d_physics/layer_1].\n" "See also [constant PROPERTY_HINT_LAYERS_3D_PHYSICS].\n" "[codeblock]\n" "@export_flags_3d_physics var physics_layers: int\n" "@export_flags_3d_physics var physics_layers_array: Array[int]\n" "[/codeblock]" msgstr "" "Exporta una propiedad entera como un campo de bandera de bits para capas de " "física 3D. El widget del panel del Inspector usará los nombres de capa " "definidos en [member ProjectSettings.layer_names/3d_physics/layer_1].\n" "Véase también [constant PROPERTY_HINT_LAYERS_3D_PHYSICS].\n" "[codeblock]\n" "@export_flags_3d_physics var physics_layers: int\n" "@export_flags_3d_physics var physics_layers_array: Array[int]\n" "[/codeblock]" msgid "" "Export an integer property as a bit flag field for 3D render layers. The " "widget in the Inspector dock will use the layer names defined in [member " "ProjectSettings.layer_names/3d_render/layer_1].\n" "See also [constant PROPERTY_HINT_LAYERS_3D_RENDER].\n" "[codeblock]\n" "@export_flags_3d_render var render_layers: int\n" "@export_flags_3d_render var render_layers_array: Array[int]\n" "[/codeblock]" msgstr "" "Exporta una propiedad de un número entero como un campo de bandera de bits " "para capas de renderizado 3D. El widget en el panel del Inspector utilizará " "los nombres de capas definidos en [member ProjectSettings.layer_names/" "3d_render/layer_1].\n" "Véase también [constant PROPERTY_HINT_LAYERS_3D_RENDER].\n" "[codeblock]\n" "@export_flags_3d_render var render_layers: int\n" "@export_flags_3d_render var render_layers_array: Array[int]\n" "[/codeblock]" msgid "" "Export an integer property as a bit flag field for navigation avoidance " "layers. The widget in the Inspector dock will use the layer names defined in " "[member ProjectSettings.layer_names/avoidance/layer_1].\n" "See also [constant PROPERTY_HINT_LAYERS_AVOIDANCE].\n" "[codeblock]\n" "@export_flags_avoidance var avoidance_layers: int\n" "@export_flags_avoidance var avoidance_layers_array: Array[int]\n" "[/codeblock]" msgstr "" "Exporta una propiedad de tipo Integer como un campo de bandera de bits para " "las capas de prevención de navegación. El widget en el Inspector usará los " "nombres de capas definidos en [member ProjectSettings.layer_names/avoidance/" "layer_1].\n" "Véase también [constant PROPERTY_HINT_LAYERS_AVOIDANCE].\n" "[codeblock]\n" "@export_flags_avoidance var avoidance_layers: int\n" "@export_flags_avoidance var avoidance_layers_array: Array[int]\n" "[/codeblock]" msgid "" "Export a [String], [Array][lb][String][rb], or [PackedStringArray] property " "as an absolute path to a directory. The path can be picked from the entire " "filesystem. See [annotation @export_dir] to limit it to the project folder " "and its subfolders.\n" "See also [constant PROPERTY_HINT_GLOBAL_DIR].\n" "[codeblock]\n" "@export_global_dir var sprite_folder_path: String\n" "@export_global_dir var sprite_folder_paths: Array[String]\n" "[/codeblock]" msgstr "" "Exporta una propiedad [String], [Array] [lb] [String] [rb], o " "[PackedStringArray] como una ruta absoluta a un directorio. La ruta puede ser " "tomada desde el Sistema de Archivos entero. Véase [annotation @export_dir] " "para limitarlo a las carpetas del proyecto y a sus subcarpetas.\n" "Véase también [constant PROPERTY_HINT_GLOBAL_DIR].\n" "[codeblock]\n" "@export_global_dir var sprite_folder_path: String\n" "@export_global_dir var sprite_folder_paths: Array[String]\n" "[/codeblock]" msgid "" "Export a [String], [Array][lb][String][rb], or [PackedStringArray] property " "as an absolute path to a file. The path can be picked from the entire " "filesystem. See [annotation @export_file] to limit it to the project folder " "and its subfolders.\n" "If [param filter] is provided, only matching files will be available for " "picking.\n" "See also [constant PROPERTY_HINT_GLOBAL_FILE].\n" "[codeblock]\n" "@export_global_file var sound_effect_path: String\n" "@export_global_file(\"*.txt\") var notes_path: String\n" "@export_global_file var multiple_paths: Array[String]\n" "[/codeblock]" msgstr "" "Exporta una propiedad de tipo [String], [Array][lb][String][rb], o " "[PackedStringArray] como ruta absoluta a un archivo. La ruta puede ser tomada " "desde el Sistema de Archivos entero. Véase [annotation @export_file] para " "limitarlo a las carpetas del proyecto y a sus subcarpetas.\n" "Si se proporciona [param filter], sólo los archivos marcados estarán " "disponibles para la selección.\n" "Véase también [constant PROPERTY_HINT_GLOBAL_FILE].\n" "[codeblock]\n" "@export_global_file var sound_effect_path: String\n" "@export_global_file(\"*.txt\") var notes_path: String\n" "@export_global_file var multiple_paths: Array[String]\n" "[/codeblock]" msgid "" "Define a new group for the following exported properties. This helps to " "organize properties in the Inspector dock. Groups can be added with an " "optional [param prefix], which would make group to only consider properties " "that have this prefix. The grouping will break on the first property that " "doesn't have a prefix. The prefix is also removed from the property's name in " "the Inspector dock.\n" "If no [param prefix] is provided, then every following property will be added " "to the group. The group ends when then next group or category is defined. You " "can also force end a group by using this annotation with empty strings for " "parameters, [code]@export_group(\"\", \"\")[/code].\n" "Groups cannot be nested, use [annotation @export_subgroup] to add subgroups " "within groups.\n" "See also [constant PROPERTY_USAGE_GROUP].\n" "[codeblock]\n" "@export_group(\"Racer Properties\")\n" "@export var nickname = \"Nick\"\n" "@export var age = 26\n" "\n" "@export_group(\"Car Properties\", \"car_\")\n" "@export var car_label = \"Speedy\"\n" "@export var car_number = 3\n" "\n" "@export_group(\"\", \"\")\n" "@export var ungrouped_number = 3\n" "[/codeblock]" msgstr "" "Define un nuevo grupo para las siguientes propiedades exportadas. Esto ayuda " "a organizar las propiedades en el panel Inspector. Los grupos pueden ser " "agregados con un [param prefix] opcional, que podría hacer un grupo para solo " "considerar las propiedades que tenga este prefijo. El agrupamiento se romperá " "con la primera propiedad que no tenga un prefijo. El prefijo también sera " "removido del nombre de la propiedad en el panel Inspector.\n" "Si no se proporciona un [param prefix], entonces cada propiedad siguiente " "sera agregada al grupo. El grupo se disuelve para cuando el grupo o categoría " "siguiente es definida. También puedes forzar la disolución de un grupo usando " "esta anotación con strings vacías como parámetros, [code]@export_group(\"\", " "\"\")[/code].\n" "Los grupos no pueden ser anidados, usa [annotation @export_subgroup] para " "añadir subgrupos dentro de grupos.\n" "Véase también [constant PROPERTY_USAGE_GROUP].\n" "[codeblock]\n" "@export_group(\"Racer Properties\")\n" "@export var nickname = \"Nick\"\n" "@export var age = 26\n" "\n" "@export_group(\"Car Properties\", \"car_\")\n" "@export var car_label = \"Speedy\"\n" "@export var car_number = 3\n" "\n" "@export_group(\"\", \"\")\n" "@export var ungrouped_number = 3\n" "[/codeblock]" msgid "" "Export a [String], [Array][lb][String][rb], [PackedStringArray], [Dictionary] " "or [Array][lb][Dictionary][rb] property with a large [TextEdit] widget " "instead of a [LineEdit]. This adds support for multiline content and makes it " "easier to edit large amount of text stored in the property.\n" "See also [constant PROPERTY_HINT_MULTILINE_TEXT].\n" "[codeblock]\n" "@export_multiline var character_biography\n" "@export_multiline var npc_dialogs: Array[String]\n" "@export_multiline(\"monospace\", \"no_wrap\") var favorite_ascii_art: String\n" "[/codeblock]" msgstr "" "Exporta una propiedad [String], [Array][lb][String][rb], [PackedStringArray], " "[Dictionary] o [Array][lb][Dictionary][rb] con un widget grande de [TextEdit] " "en vez de un [LineEdit]. Esto añade soporte para contenido multilínea y " "facilita editar una gran cantidad de texto almacenado en la propiedad.\n" "Véase también [constant PROPERTY_HINT_MULTILINE_TEXT].\n" "[codeblock]\n" "@export_multiline var character_biography\n" "@export_multiline var npc_dialogs: Array[String]\n" "@export_multiline(\"monospace\", \"no_wrap\") var favorite_ascii_art: String\n" "[/codeblock]" msgid "" "Export a [NodePath] or [Array][lb][NodePath][rb] property with a filter for " "allowed node types.\n" "See also [constant PROPERTY_HINT_NODE_PATH_VALID_TYPES].\n" "[codeblock]\n" "@export_node_path(\"Button\", \"TouchScreenButton\") var some_button\n" "@export_node_path(\"Button\", \"TouchScreenButton\") var many_buttons: " "Array[NodePath]\n" "[/codeblock]\n" "[b]Note:[/b] The type must be a native class or a globally registered script " "(using the [code]class_name[/code] keyword) that inherits [Node]." msgstr "" "Exporta una propiedad [NodePath] o [Array][lb][NodePath][rb] con un filtro " "para los tipos de nodo permitidos.\n" "Véase también [constant PROPERTY_HINT_NODE_PATH_VALID_TYPES].\n" "[codeblock]\n" "@export_node_path(\"Button\", \"TouchScreenButton\") var some_button\n" "@export_node_path(\"Button\", \"TouchScreenButton\") var many_buttons: " "Array[NodePath]\n" "[/codeblock]\n" "[b]Note:[/b] El tipo debe de ser una clase nativa o un script registrado " "globalmente (usando la keyword de [code]class_name[/code] ) que hereda de la " "clase [Node]." msgid "" "Export a [String], [Array][lb][String][rb], or [PackedStringArray] property " "with a placeholder text displayed in the editor widget when no value is " "present.\n" "See also [constant PROPERTY_HINT_PLACEHOLDER_TEXT].\n" "[codeblock]\n" "@export_placeholder(\"Name in lowercase\") var character_id: String\n" "@export_placeholder(\"Name in lowercase\") var friend_ids: Array[String]\n" "[/codeblock]" msgstr "" "Exporta una propiedad [String], [Array][lb][String][rb], or " "[PackedStringArray] con un texto genérico mostrado en el widget del editor " "cuando no hay valores presentes.\n" "Véase también [constant PROPERTY_HINT_PLACEHOLDER_TEXT].\n" "[codeblock]\n" "@export_placeholder(\"Nombre en minúscula\") var character_id: String\n" "@export_placeholder(\"Nombre en minúscula\") var friend_id: Array[String]\n" "[/codeblock]" msgid "" "Export an [int], [float], [Array][lb][int][rb], [Array][lb][float][rb], " "[PackedByteArray], [PackedInt32Array], [PackedInt64Array], " "[PackedFloat32Array], or [PackedFloat64Array] property as a range value. The " "range must be defined by [param min] and [param max], as well as an optional " "[param step] and a variety of extra hints. The [param step] defaults to " "[code]1[/code] for integer properties. For floating-point numbers this value " "depends on your [member EditorSettings.interface/inspector/" "default_float_step] setting.\n" "If hints [code]\"or_greater\"[/code] and [code]\"or_less\"[/code] are " "provided, the editor widget will not cap the value at range boundaries. The " "[code]\"exp\"[/code] hint will make the edited values on range to change " "exponentially. The [code]\"prefer_slider\"[/code] hint will make integer " "values use the slider instead of arrows for editing, while [code]" "\"hide_control\"[/code] will hide the element controlling the value of the " "editor widget.\n" "Hints also allow to indicate the units for the edited value. Using [code]" "\"radians_as_degrees\"[/code] you can specify that the actual value is in " "radians, but should be displayed in degrees in the Inspector dock (the range " "values are also in degrees). [code]\"degrees\"[/code] allows to add a degree " "sign as a unit suffix (the value is unchanged). Finally, a custom suffix can " "be provided using [code]\"suffix:unit\"[/code], where \"unit\" can be any " "string.\n" "See also [constant PROPERTY_HINT_RANGE].\n" "[codeblock]\n" "@export_range(0, 20) var number\n" "@export_range(-10, 20) var number\n" "@export_range(-10, 20, 0.2) var number: float\n" "@export_range(0, 20) var numbers: Array[float]\n" "\n" "@export_range(0, 100, 1, \"or_greater\") var power_percent\n" "@export_range(0, 100, 1, \"or_greater\", \"or_less\") var health_delta\n" "\n" "@export_range(-180, 180, 0.001, \"radians_as_degrees\") var angle_radians\n" "@export_range(0, 360, 1, \"degrees\") var angle_degrees\n" "@export_range(-8, 8, 2, \"suffix:px\") var target_offset\n" "[/codeblock]" msgstr "" "Exporta una propiedad [int], [float], [Array][lb][int][rb], [Array][lb][float]" "[rb], [PackedByteArray], [PackedInt32Array], [PackedInt64Array], " "[PackedFloat32Array] o [PackedFloat64Array] como un valor de rango. El rango " "debe estar definido entre [param min] y [param max], así como un [param step] " "opcional y una variedad de pistas extras. El valor de [param step] por " "defecto es [code]1[/code] para propiedades de tipo entero. Para los números " "de punto flotante, el valor depende de tu configuración en [member " "EditorSettings.interface/inspector/default_float_step].\n" "Si se suministran las pistas [code]\"or_greater\"[/code] y [code]\"or_less\"[/" "code], el control del editor no limitará el valor a los límites establecidos. " "La pista [code]\"exp\"[/code] hará que los valores editados en el rango " "cambien exponencialmente. La pista [code]\"prefer_slider\"[/code] hará que " "los valores enteros usen el deslizador en lugar de flechas para editar, " "mientras que [code]\"hide_control\"[/code] ocultará el elemento que controla " "el valor en el control del editor.\n" "Las pistas también pueden usarse para especificar distintas unidades de " "medida para el parámetro editado. Usando [code]\"radians_as_degrees\"[/code], " "puedes especificar que el valor real es en radianes pero que deberá ser " "mostrado como grados en el panel del Inspector (los valores del rango también " "están en grados). [code]\"degrees\"[/code] permitirá añadir el símbolo de " "grados como sufijo de la unidad. Finalmente, se podrá especificar una pista " "personalizada para añadir alguna clase de sufijo al valor usando [code]" "\"suffix:unit\"[/code], donde \"unit\" podrá ser cualquier string de texto.\n" "Véase también [constant PROPERTY_HINT_RANGE].\n" "[codeblock]\n" "@export_range(0, 20) var number\n" "@export_range(-10, 20) var number\n" "@export_range(-10, 20, 0.2) var number: float\n" "@export_range(0, 20) var numbers: Array[float]\n" "\n" "@export_range(0, 100, 1, \"or_greater\") var power_percent\n" "@export_range(0, 100, 1, \"or_greater\", \"or_less\") var health_delta\n" "\n" "@export_range(-180, 180, 0.001, \"radians_as_degrees\") var angle_radians\n" "@export_range(0, 360, 1, \"degrees\") var angle_degrees\n" "@export_range(-8, 8, 2, \"suffix:px\") var target_offset\n" "[/codeblock]" msgid "" "Export a property with [constant PROPERTY_USAGE_STORAGE] flag. The property " "is not displayed in the editor, but it is serialized and stored in the scene " "or resource file. This can be useful for [annotation @tool] scripts. Also the " "property value is copied when [method Resource.duplicate] or [method " "Node.duplicate] is called, unlike non-exported variables.\n" "[codeblock]\n" "var a # Not stored in the file, not displayed in the editor.\n" "@export_storage var b # Stored in the file, not displayed in the editor.\n" "@export var c: int # Stored in the file, displayed in the editor.\n" "[/codeblock]" msgstr "" "Exporta una propiedad con la bandera [constant PROPERTY_USAGE_STORAGE]. La " "propiedad no se muestra en el editor, pero es serializada y almacenada en la " "escena o el archivo de recurso. Esto puede ser útil para los scripts " "[annotation @tool]. Además, el valor de la propiedad es copiado cuando " "[method Resource.duplicate] o [method Node.duplicate] es llamado, a " "diferencia de las variables no-exportadas.\n" "[codeblock]\n" "var a # No almacenado en el archivo, no se muestra en el editor.\n" "@export_storage var b # Almacenado en el archivo, no se muestra en el " "editor.\n" "@export var c: int # Almacenado en el archivo, se muestra en el editor.\n" "[/codeblock]" msgid "" "Define a new subgroup for the following exported properties. This helps to " "organize properties in the Inspector dock. Subgroups work exactly like " "groups, except they need a parent group to exist. See [annotation " "@export_group].\n" "See also [constant PROPERTY_USAGE_SUBGROUP].\n" "[codeblock]\n" "@export_group(\"Racer Properties\")\n" "@export var nickname = \"Nick\"\n" "@export var age = 26\n" "\n" "@export_subgroup(\"Car Properties\", \"car_\")\n" "@export var car_label = \"Speedy\"\n" "@export var car_number = 3\n" "[/codeblock]\n" "[b]Note:[/b] Subgroups cannot be nested, but you can use the slash separator " "([code]/[/code]) to achieve the desired effect:\n" "[codeblock]\n" "@export_group(\"Car Properties\")\n" "@export_subgroup(\"Wheels\", \"wheel_\")\n" "@export_subgroup(\"Wheels/Front\", \"front_wheel_\")\n" "@export var front_wheel_strength = 10\n" "@export var front_wheel_mobility = 5\n" "@export_subgroup(\"Wheels/Rear\", \"rear_wheel_\")\n" "@export var rear_wheel_strength = 8\n" "@export var rear_wheel_mobility = 3\n" "@export_subgroup(\"Wheels\", \"wheel_\")\n" "@export var wheel_material: PhysicsMaterial\n" "[/codeblock]" msgstr "" "Define un nuevo subgrupo para las siguientes propiedades exportadas. Esto " "ayuda a organizar las propiedades en el dock Inspector. Los subgrupos " "funcionan exactamente como los grupos, excepto que necesitan que exista un " "grupo padre. Véase [annotation @export_group].\n" "Véase también [constant PROPERTY_USAGE_SUBGROUP].\n" "[codeblock]\n" "@export_group(\"Racer Properties\")\n" "@export var nickname = \"Nick\"\n" "@export var age = 26\n" "\n" "@export_subgroup(\"Car Properties\", \"car_\")\n" "@export var car_label = \"Speedy\"\n" "@export var car_number = 3\n" "[/codeblock]\n" "[b]Nota:[/b] Los subgrupos no se pueden anidar, pero puedes usar el separador " "de barra ([code]/[/code]) para lograr el efecto deseado:\n" "[codeblock]\n" "@export_group(\"Car Properties\")\n" "@export_subgroup(\"Wheels\", \"wheel_\")\n" "@export_subgroup(\"Wheels/Front\", \"front_wheel_\")\n" "@export var front_wheel_strength = 10\n" "@export var front_wheel_mobility = 5\n" "@export_subgroup(\"Wheels/Rear\", \"rear_wheel_\")\n" "@export var rear_wheel_strength = 8\n" "@export var rear_wheel_mobility = 3\n" "@export_subgroup(\"Wheels\", \"wheel_\")\n" "@export var wheel_material: PhysicsMaterial\n" "[/codeblock]" msgid "" "Export a [Callable] property as a clickable button with the label [param " "text]. When the button is pressed, the callable is called.\n" "If [param icon] is specified, it is used to fetch an icon for the button via " "[method Control.get_theme_icon], from the [code]\"EditorIcons\"[/code] theme " "type. If [param icon] is omitted, the default [code]\"Callable\"[/code] icon " "is used instead.\n" "Consider using the [EditorUndoRedoManager] to allow the action to be reverted " "safely.\n" "See also [constant PROPERTY_HINT_TOOL_BUTTON].\n" "[codeblock]\n" "@tool\n" "extends Sprite2D\n" "\n" "@export_tool_button(\"Hello\") var hello_action = hello\n" "@export_tool_button(\"Randomize the color!\", \"ColorRect\")\n" "var randomize_color_action = randomize_color\n" "\n" "func hello():\n" "\tprint(\"Hello world!\")\n" "\n" "func randomize_color():\n" "\tvar undo_redo = EditorInterface.get_editor_undo_redo()\n" "\tundo_redo.create_action(\"Randomized Sprite2D Color\")\n" "\tundo_redo.add_do_property(self, &\"self_modulate\", Color(randf(), randf(), " "randf()))\n" "\tundo_redo.add_undo_property(self, &\"self_modulate\", self_modulate)\n" "\tundo_redo.commit_action()\n" "[/codeblock]\n" "[b]Note:[/b] The property is exported without the [constant " "PROPERTY_USAGE_STORAGE] flag because a [Callable] cannot be properly " "serialized and stored in a file.\n" "[b]Note:[/b] In an exported project neither [EditorInterface] nor " "[EditorUndoRedoManager] exist, which may cause some scripts to break. To " "prevent this, you can use [method Engine.get_singleton] and omit the static " "type from the variable declaration:\n" "[codeblock]\n" "var undo_redo = " "Engine.get_singleton(&\"EditorInterface\").get_editor_undo_redo()\n" "[/codeblock]\n" "[b]Note:[/b] Avoid storing lambda callables in member variables of " "[RefCounted]-based classes (e.g. resources), as this can lead to memory " "leaks. Use only method callables and optionally [method Callable.bind] or " "[method Callable.unbind]." msgstr "" "Exporta una propiedad [Callable] como un botón clickeable con la etiqueta " "[param text]. Cuando se presiona el botón, se llama al [Callable].\n" "Si se especifica [param icon], este se utiliza para obtener un icono para el " "botón mediante [method Control.get_theme_icon], del tipo de tema [code]" "\"EditorIcons\"[/code]. Si se omite [param icon], se usa el icono " "predeterminado [code]\"Callable\"[/code].\n" "Considera usar [EditorUndoRedoManager] para permitir que la acción pueda " "revertirse de manera segura.\n" "Véase también [constant PROPERTY_HINT_TOOL_BUTTON].\n" "[codeblock]\n" "@tool\n" "extends Sprite2D\n" "\n" "@export_tool_button(\"Hello\") var hello_action = hello\n" "@export_tool_button(\"Randomize the color!\", \"ColorRect\")\n" "var randomize_color_action = randomize_color\n" "\n" "func hello():\n" "\tprint(\"Hello world!\")\n" "\n" "func randomize_color():\n" "\tvar undo_redo = EditorInterface.get_editor_undo_redo()\n" "\tundo_redo.create_action(\"Randomized Sprite2D Color\")\n" "\tundo_redo.add_do_property(self, &\"self_modulate\", Color(randf(), randf(), " "randf()))\n" "\tundo_redo.add_undo_property(self, &\"self_modulate\", self_modulate)\n" "\tundo_redo.commit_action()\n" "[/codeblock]\n" "[b]Nota:[/b] La propiedad se exporta sin la bandera [constant " "PROPERTY_USAGE_STORAGE] porque un [Callable] no puede ser serializado ni " "almacenado adecuadamente en un archivo.\n" "[b]Nota:[/b] En un proyecto exportado, ni [EditorInterface] ni " "[EditorUndoRedoManager] existen, lo que puede hacer que algunos scripts " "fallen. Para evitar esto, puedes usar [method Engine.get_singleton] y omitir " "el tipo estático en la declaración de la variable:\n" "[codeblock]\n" "var undo_redo = " "Engine.get_singleton(&\"EditorInterface\").get_editor_undo_redo()\n" "[/codeblock]\n" "[b]Nota:[/b] Evita almacenar [Callable] tipo lambda en variables miembro de " "clases basadas en [RefCounted] (por ejemplo, recursos), ya que esto podría " "provocar fugas de memoria. Usa únicamente [Callable] de métodos y, si es " "necesario, utiliza los métodos [method Callable.bind] o [method " "Callable.unbind]." msgid "" "Add a custom icon to the current script. The icon specified at [param " "icon_path] is displayed in the Scene dock for every node of that class, as " "well as in various editor dialogs.\n" "[codeblock]\n" "@icon(\"res://path/to/class/icon.svg\")\n" "[/codeblock]\n" "[b]Note:[/b] Only the script can have a custom icon. Inner classes are not " "supported.\n" "[b]Note:[/b] As annotations describe their subject, the [annotation @icon] " "annotation must be placed before the class definition and inheritance.\n" "[b]Note:[/b] Unlike most other annotations, the argument of the [annotation " "@icon] annotation must be a string literal (constant expressions are not " "supported)." msgstr "" "Añade un icono personalizado al script actual. El icono especificado en " "[param icon_path] se muestra en el panel de la Escena por cada nodo de esa " "clase, así como en varios diálogos de edición.\n" "[codeblock]\n" "@icon(\"res://path/to/class/icon.svg\")\n" "[/codeblock]\n" "[b]Nota:[/b] Solo el script puede tener un icono personalizado. Las clases " "internas no están soportadas.\n" "[b]Nota:[/b] Como las anotaciones describen su tema, la anotación [annotation " "@icon] se debe poner antes de definir la clase y su herencia.\n" "[b]Nota:[/b] A diferencia de la mayoría de las otras anotaciones, el " "argumento de la anotación [annotation @icon] debe ser un literal de string " "(las expresiones constantes no están soportadas)." msgid "" "Mark the following property as assigned when the [Node] is ready. Values for " "these properties are not assigned immediately when the node is initialized " "([method Object._init]), and instead are computed and stored right before " "[method Node._ready].\n" "[codeblock]\n" "@onready var character_name = $Label\n" "[/codeblock]" msgstr "" "Marca la siguiente propiedad como asignada cuando el [Node] esté listo. Los " "valores para esas propiedades no son asignadas inmediatamente cuando el nodo " "([method Object._init]) es inicializado, y en su lugar son computadas y " "almacenadas justo antes de [method Node._ready].\n" "[codeblock]\n" "@onready var character_name: Label = $Label\n" "[/codeblock]" msgid "" "Mark the following method for remote procedure calls. See [url=$DOCS_URL/" "tutorials/networking/high_level_multiplayer.html]High-level multiplayer[/" "url].\n" "If [param mode] is set as [code]\"any_peer\"[/code], allows any peer to call " "this RPC function. Otherwise, only the authority peer is allowed to call it " "and [param mode] should be kept as [code]\"authority\"[/code]. When " "configuring functions as RPCs with [method Node.rpc_config], each of these " "modes respectively corresponds to the [constant " "MultiplayerAPI.RPC_MODE_AUTHORITY] and [constant " "MultiplayerAPI.RPC_MODE_ANY_PEER] RPC modes. See [enum " "MultiplayerAPI.RPCMode]. If a peer that is not the authority tries to call a " "function that is only allowed for the authority, the function will not be " "executed. If the error can be detected locally (when the RPC configuration is " "consistent between the local and the remote peer), an error message will be " "displayed on the sender peer. Otherwise, the remote peer will detect the " "error and print an error there.\n" "If [param sync] is set as [code]\"call_remote\"[/code], the function will " "only be executed on the remote peer, but not locally. To run this function " "locally too, set [param sync] to [code]\"call_local\"[/code]. When " "configuring functions as RPCs with [method Node.rpc_config], this is " "equivalent to setting [code]call_local[/code] to [code]true[/code].\n" "The [param transfer_mode] accepted values are [code]\"unreliable\"[/code], " "[code]\"unreliable_ordered\"[/code], or [code]\"reliable\"[/code]. It sets " "the transfer mode of the underlying [MultiplayerPeer]. See [member " "MultiplayerPeer.transfer_mode].\n" "The [param transfer_channel] defines the channel of the underlying " "[MultiplayerPeer]. See [member MultiplayerPeer.transfer_channel].\n" "The order of [param mode], [param sync] and [param transfer_mode] does not " "matter, but values related to the same argument must not be used more than " "once. [param transfer_channel] always has to be the 4th argument (you must " "specify 3 preceding arguments).\n" "[codeblock]\n" "@rpc\n" "func fn(): pass\n" "\n" "@rpc(\"any_peer\", \"unreliable_ordered\")\n" "func fn_update_pos(): pass\n" "\n" "@rpc(\"authority\", \"call_remote\", \"reliable\", 0) # Equivalent to @rpc\n" "func fn_default(): pass\n" "[/codeblock]\n" "[b]Note:[/b] Methods annotated with [annotation @rpc] cannot receive objects " "which define required parameters in [method Object._init]. See [method " "Object._init] for more details." msgstr "" "Marca el siguiente método para llamadas de procedimiento remoto (RPC). Véase " "[url=$DOCS_URL/tutorials/networking/high_level_multiplayer.html]High-level " "multiplayer[/url].\n" "Si [param mode] es establecido como [code]\"any_peer\"[/code], permite que " "cualquier par llame a esta función RPC. De lo contrario, solo la autoridad de " "red tiene permitido llamarla y el [param mode] debe mantenerse como [code]" "\"authority\"[/code]. Al configurar funciones como las RPCs con [method " "Node.rpc_config], cada uno de estos modos corresponden respectivamente a los " "modos RPC [constant MultiplayerAPI.RPC_MODE_AUTHORITY] y [constant " "MultiplayerAPI.RPC_MODE_ANY_PEER] RPC. Véase [enum MultiplayerAPI.RPCMode]. " "Si un par que no es la autirudad intenta llamar a una función permitida solo " "para la autoridad, entonces la función no será ejecutada. Si el error puede " "ser detectado localmente (cuando la configuración RPC es consistente entre el " "par local y el remoto), se mostrará un mensaje de error en el par emisor. De " "lo contrario, el par remoto debería detectar e imprimir el error allí.\n" "Si [param sync] es establecido como [code]\"call_remote\"[/code], la función " "se ejecutará solo en el par remoto, pero no localmente. Para ejecutar esta " "función también de forma local, establece [param sync] como [code]" "\"call_local\"[/code]. Al configurar funciones como RPCs con [method " "Node.rpc_config], esto es equivalente a establecer [code]call_local[/code] " "como [code]true[/code].\n" "Los valores aceptados para [param transfer_mode] son [code]\"unreliable\"[/" "code], [code]\"unreliable_ordered\"[/code], or [code]\"reliable\"[/code]. " "Establece el modo de transferencia subyacente [MultiplayerPeer]. Véase " "[member MultiplayerPeer.transfer_mode].\n" "El [param transfer_channel] define el canal del [MultiplayerPeer] subyacente. " "Véase [member MultiplayerPeer.transfer_channel].\n" "El orden de [param mode], [param sync] y [param transfer_mode] no importa, " "pero no deben usarse valores relacionados al mismo argumento más de una vez. " "[param transfer_channel] siempre debe ser el cuarto argumento (debes " "especificar los tres argumentos precedentes).\n" "[codeblock]\n" "@rpc\n" "func fn(): pass\n" "\n" "@rpc(\"any_peer\", \"unreliable_ordered\")\n" "func fn_update_pos(): pass\n" "\n" "@rpc(\"authority\", \"call_remote\", \"reliable\", 0) # Equivalente a @rpc\n" "func fn_default(): pass\n" "[/codeblock]\n" "[b]Nota:[/b] Los métodos con la anotación [annotation @rpc] no pueden recibir " "objetos que definen un parámetro requerido en el método [method " "Object._init]. Véase [method Object._init] para más detalles." msgid "" "Make a script with static variables to not persist after all references are " "lost. If the script is loaded again the static variables will revert to their " "default values.\n" "[b]Note:[/b] As annotations describe their subject, the [annotation " "@static_unload] annotation must be placed before the class definition and " "inheritance.\n" "[b]Warning:[/b] Currently, due to a bug, scripts are never freed, even if " "[annotation @static_unload] annotation is used." msgstr "" "Crea un script con variables estáticas que no persistan después de que se " "pierdan todas las referencias. Si el script se carga nuevamente, las " "variables estáticas volverán a sus valores predeterminados.\n" "[b]Nota:[/b] Como las anotaciones describen su subject, la anotación " "[annotation @static_unload] debe colocarse antes de la definición de clase y " "la herencia.\n" "[b]Advertencia:[/b] Actualmente, debido a un error, los scripts nunca se " "liberan, incluso si se usa la anotación [annotation @static_unload]." msgid "" "Mark the current script as a tool script, allowing it to be loaded and " "executed by the editor. See [url=$DOCS_URL/tutorials/plugins/" "running_code_in_the_editor.html]Running code in the editor[/url].\n" "[codeblock]\n" "@tool\n" "extends Node\n" "[/codeblock]\n" "[b]Note:[/b] As annotations describe their subject, the [annotation @tool] " "annotation must be placed before the class definition and inheritance." msgstr "" "Marca el script actual como una herramienta de script, permitiéndole ser " "cargado y ejecutado por el editor. Véase [url=$DOCS_URL/tutorials/plugins/" "running_code_in_the_editor.html]Ejecutar código en el editor[/url].\n" "[codeblock]\n" "@tool\n" "extends Node\n" "[/codeblock]\n" "[b]Nota:[/b] Como las anotaciones describen sus sujetos, la [annotation " "@tool]debe ser colocada antes de la definición de clase y herencia." msgid "" "Mark the following statement to ignore the specified [param warning]. See " "[url=$DOCS_URL/tutorials/scripting/gdscript/warning_system.html]GDScript " "warning system[/url].\n" "[codeblock]\n" "func test():\n" "\tprint(\"hello\")\n" "\treturn\n" "\t@warning_ignore(\"unreachable_code\")\n" "\tprint(\"unreachable\")\n" "[/codeblock]\n" "See also [annotation @warning_ignore_start] and [annotation " "@warning_ignore_restore]." msgstr "" "Marca la siguiente declaración para ignorar el [param warning] especificado. " "Véase [url=$DOCS_URL/tutorials/scripting/gdscript/" "warning_system.html]GDScript warning system[/url].\n" "[codeblock]\n" ". . . .func test():\n" ". . . .print(\"hola\")\n" ". . . .return\n" ". . . .@warning_ignore(\"unreachable_code\")\n" "print(\"unreachable\")\n" "[/codeblock]\n" "Véase también [annotation @warning_ignore_start] y [annotation " "@warning_ignore_restore]." msgid "" "Stops ignoring the listed warning types after [annotation " "@warning_ignore_start]. Ignoring the specified warning types will be reset to " "Project Settings. This annotation can be omitted to ignore the warning types " "until the end of the file.\n" "[b]Note:[/b] Unlike most other annotations, arguments of the [annotation " "@warning_ignore_restore] annotation must be string literals (constant " "expressions are not supported)." msgstr "" "Deja de ignorar los tipos de advertencia enumerados después de [annotation " "@warning_ignore_start]. Al ignorar los tipos de advertencia especificados, se " "restablecerá la configuración del proyecto. Esta anotación se puede omitir " "para ignorar los tipos de advertencia hasta el final del archivo.\n" "[b]Nota:[/b] A diferencia de la mayoría de las demás anotaciones, los " "argumentos de la anotación [annotation @warning_ignore_restore] deben ser " "literales de string (no se admiten expresiones constantes)." msgid "" "Starts ignoring the listed warning types until the end of the file or the " "[annotation @warning_ignore_restore] annotation with the given warning type.\n" "[codeblock]\n" "func test():\n" "\tvar a = 1 # Warning (if enabled in the Project Settings).\n" "\t@warning_ignore_start(\"unused_variable\")\n" "\tvar b = 2 # No warning.\n" "\tvar c = 3 # No warning.\n" "\t@warning_ignore_restore(\"unused_variable\")\n" "\tvar d = 4 # Warning (if enabled in the Project Settings).\n" "[/codeblock]\n" "[b]Note:[/b] To suppress a single warning, use [annotation @warning_ignore] " "instead.\n" "[b]Note:[/b] Unlike most other annotations, arguments of the [annotation " "@warning_ignore_start] annotation must be string literals (constant " "expressions are not supported)." msgstr "" "Comienza a ignorar los tipos de advertencias enumerados hasta el final del " "archivo o hasta la anotación [annotation @warning_ignore_restore] con el tipo " "de advertencia especificado.\n" "[codeblock]\n" "func test():\n" "\tvar a = 1 # Advertencia (si está habilitada en la Configuración del " "Proyecto).\n" "\t@warning_ignore_start(\"unused_variable\")\n" "\tvar b = 2 # Sin advertencia.\n" "\tvar c = 3 # Sin advertencia.\n" "\t@warning_ignore_restore(\"unused_variable\")\n" "\tvar d = 4 # Advertencia (si está habilitada en la Configuración del " "Proyecto).\n" "[/codeblock]\n" "[b]Nota:[/b] Para suprimir una sola advertencia, utiliza [annotation " "@warning_ignore] en su lugar.\n" "[b]Nota:[/b] A diferencia de la mayoría de otras anotaciones, los argumentos " "de la anotación [annotation @warning_ignore_start] deben ser literales de " "string (las expresiones constantes no son compatibles)." msgid "Global scope constants and functions." msgstr "Constantes de ámbito global y funciones." msgid "" "A list of global scope enumerated constants and built-in functions. This is " "all that resides in the globals, constants regarding error codes, keycodes, " "property hints, etc.\n" "Singletons are also documented here, since they can be accessed from " "anywhere.\n" "For the entries that can only be accessed from scripts written in GDScript, " "see [@GDScript]." msgstr "" "Una lista de constantes enumeradas de ámbito global y funciones integradas. " "Esto es todo lo que reside en las variables globales, constantes relacionadas " "con códigos de error, códigos de teclas, sugerencias de propiedades, etc.\n" "Los singletons también se documentan aquí, ya que se puede acceder a ellos " "desde cualquier lugar.\n" "Para las entradas a las que solo se puede acceder desde scripts escritos en " "GDScript, Véase [@GDScript]." msgid "Random number generation" msgstr "Generación de números aleatorios" msgid "" "Returns the absolute value of a [Variant] parameter [param x] (i.e. non-" "negative value). Supported types: [int], [float], [Vector2], [Vector2i], " "[Vector3], [Vector3i], [Vector4], [Vector4i].\n" "[codeblock]\n" "var a = abs(-1)\n" "# a is 1\n" "\n" "var b = abs(-1.2)\n" "# b is 1.2\n" "\n" "var c = abs(Vector2(-3.5, -4))\n" "# c is (3.5, 4)\n" "\n" "var d = abs(Vector2i(-5, -6))\n" "# d is (5, 6)\n" "\n" "var e = abs(Vector3(-7, 8.5, -3.8))\n" "# e is (7, 8.5, 3.8)\n" "\n" "var f = abs(Vector3i(-7, -8, -9))\n" "# f is (7, 8, 9)\n" "[/codeblock]\n" "[b]Note:[/b] For better type safety, use [method absf], [method absi], " "[method Vector2.abs], [method Vector2i.abs], [method Vector3.abs], [method " "Vector3i.abs], [method Vector4.abs], or [method Vector4i.abs]." msgstr "" "Devuelve el valor absoluto de un parámetro [Variant] [param x] (es decir, un " "valor no negativo). Tipos admitidos: [int], [float], [Vector2], [Vector2i], " "[Vector3], [Vector3i], [Vector4], [Vector4i].\n" "[codeblock]\n" "var a = abs(-1)\n" "# a es 1\n" "\n" "var b = abs(-1.2)\n" "# b es 1.2\n" "\n" "var c = abs(Vector2(-3.5, -4))\n" "# c es (3.5, 4)\n" "\n" "var d = abs(Vector2i(-5, -6))\n" "# d es (5, 6)\n" "\n" "var e = abs(Vector3(-7, 8.5, -3.8))\n" "# e es (7, 8.5, 3.8)\n" "\n" "var f = abs(Vector3i(-7, -8, -9))\n" "# f es (7, 8, 9)\n" "[/codeblock]\n" "[b]Nota:[/b] Para mayor seguridad de tipos, utiliza [method absf], [method " "absi], [method Vector2.abs], [method Vector2i.abs], [method Vector3.abs], " "[method Vector3i.abs], [method Vector4.abs] o [method Vector4i.abs]." msgid "" "Returns the absolute value of float parameter [param x] (i.e. positive " "value).\n" "[codeblock]\n" "# a is 1.2\n" "var a = absf(-1.2)\n" "[/codeblock]" msgstr "" "Devuelve el valor absoluto del parámetro float [param x] (es decir, un valor " "positivo).\n" "[codeblock]\n" "# a vale 1.2\n" "var a = absf(-1.2)\n" "[/codeblock]" msgid "" "Returns the absolute value of int parameter [param x] (i.e. positive value).\n" "[codeblock]\n" "# a is 1\n" "var a = absi(-1)\n" "[/codeblock]" msgstr "" "Devuelve el valor absoluto del parámetro int [param x] (es decir, un valor " "positivo).\n" "[codeblock]\n" "# a vale 1\n" "var a = absi(-1)\n" "[/codeblock]" msgid "" "Returns the arc cosine of [param x] in radians. Use to get the angle of " "cosine [param x]. [param x] will be clamped between [code]-1.0[/code] and " "[code]1.0[/code] (inclusive), in order to prevent [method acos] from " "returning [constant @GDScript.NAN].\n" "[codeblock]\n" "# c is 0.523599 or 30 degrees if converted with rad_to_deg(c)\n" "var c = acos(0.866025)\n" "[/codeblock]" msgstr "" "Devuelve el arco coseno de [param x] en radianes. Se usa para obtener el " "ángulo del coseno de [param x]. [param x] debe estar entre [code]-1.0[/code] " "y [code]1.0[/code] (inclusivo); en otro caso, [method acos] devolverá " "[constant @GDScript.NAN].\n" "[codeblock]\n" "# c es 0.523599 o 30 grados si se convierte con rad2deg(s)\n" "c = acos(0.866025)\n" "[/codeblock]" msgid "" "Returns the hyperbolic arc (also called inverse) cosine of [param x], " "returning a value in radians. Use it to get the angle from an angle's cosine " "in hyperbolic space if [param x] is larger or equal to 1. For values of " "[param x] lower than 1, it will return 0, in order to prevent [method acosh] " "from returning [constant @GDScript.NAN].\n" "[codeblock]\n" "var a = acosh(2) # Returns 1.31695789692482\n" "cosh(a) # Returns 2\n" "\n" "var b = acosh(-1) # Returns 0\n" "[/codeblock]" msgstr "" "Devuelve el arco coseno hiperbólico (también llamado inverso) de [param x], " "devolviendo un valor en radianes. Se usa para obtener el ángulo a partir del " "coseno de un ángulo en el espacio hiperbólico si [param x] es mayor o igual a " "1. Para valores de [param x] menores que 1, devolverá 0 para evitar que " "[method acosh] devuelva [constant @GDScript.NAN].\n" "[codeblock]\n" "var a = acosh(2) # Devuelve 1.31695789692482\n" "cosh(a) # Devuelve 2\n" "\n" "var b = acosh(-1) # Devuelve 0\n" "[/codeblock]" msgid "" "Returns the difference between the two angles (in radians), in the range of " "[code][-PI, +PI][/code]. When [param from] and [param to] are opposite, " "returns [code]-PI[/code] if [param from] is smaller than [param to], or " "[code]PI[/code] otherwise." msgstr "" "Devuelve la diferencia entre dos ángulos (en radianes), en el rango [code][-" "PI, +PI][/code]. Cuando [param from] y [param to] son opuestos, devuelve " "[code]-PI[/code] si [param from] es menor que [param to], o [code]PI[/code] " "en caso contrario." msgid "" "Returns the arc sine of [param x] in radians. Use to get the angle of sine " "[param x]. [param x] will be clamped between [code]-1.0[/code] and [code]1.0[/" "code] (inclusive), in order to prevent [method asin] from returning [constant " "@GDScript.NAN].\n" "[codeblock]\n" "# s is 0.523599 or 30 degrees if converted with rad_to_deg(s)\n" "var s = asin(0.5)\n" "[/codeblock]" msgstr "" "Devuelve el arcoseno de [param x] en radianes. Úsalo para obtener el ángulo " "del seno de [param x]. [param x] será ajustado entre [code]-1.0[/code] y " "[code]1.0[/code] (inclusivo), con el fin de prevenir que [method asin] " "devuelva [constant @GDScript.NAN].\n" "[codeblock]\n" "# s es 0.523599 o 30 grados si se convierte con rad_to_deg(s)\n" "var s = asin(0.5)\n" "[/codeblock]" msgid "" "Returns the hyperbolic arc (also called inverse) sine of [param x], returning " "a value in radians. Use it to get the angle from an angle's sine in " "hyperbolic space.\n" "[codeblock]\n" "var a = asinh(0.9) # Returns 0.8088669356527824\n" "sinh(a) # Returns 0.9\n" "[/codeblock]" msgstr "" "Devuelve el arco hiperbólico (también llamado seno inverso) de [param x], " "devolviendo un valor en radianes. Úsalo para obtener el ángulo a partir del " "seno de un ángulo en el espacio hiperbólico.\n" "[codeblock]\n" "var a = asinh(0.9) # Devuelve 0.8088669356527824\n" "sinh(a) # Devuelve 0.9\n" "[/codeblock]" msgid "" "Returns the arc tangent of [param x] in radians. Use it to get the angle from " "an angle's tangent in trigonometry.\n" "The method cannot know in which quadrant the angle should fall. See [method " "atan2] if you have both [code]y[/code] and [code skip-lint]x[/code].\n" "[codeblock]\n" "var a = atan(0.5) # a is 0.463648\n" "[/codeblock]\n" "If [param x] is between [code]-PI / 2[/code] and [code]PI / 2[/code] " "(inclusive), [code]atan(tan(x))[/code] is equal to [param x]." msgstr "" "Devuelve el arco tangente de [param x] en radianes. Úsalo para obtener el " "ángulo a partir de la tangente de un ángulo en trigonometría.\n" "El método no puede saber en qué cuadrante se encuentra el ángulo. Véase " "[method atan2] si tienes tanto [code]y[/code] como [code skip-lint]x[/code]\n" "[codeblock]\n" "var a = atan(0.5) # a is 0.463648\n" "[/codeblock]\n" "Si [param x] está entre lo valores [code]-PI / 2[/code] y [code]PI / 2[/code] " "(inclusivo), [code]atan(tan(x))[/code] es igual a [param x]." msgid "" "Returns the arc tangent of [code]y/x[/code] in radians. Use to get the angle " "of tangent [code]y/x[/code]. To compute the value, the method takes into " "account the sign of both arguments in order to determine the quadrant.\n" "Important note: The Y coordinate comes first, by convention.\n" "[codeblock]\n" "var a = atan2(0, -1) # a is 3.141593\n" "[/codeblock]" msgstr "" "Devuelve la arcotangente de [code]y/x[/code] en radianes. Úsalo para obtener " "el ángulo de la tangente [code]y/x[/code]. Para obtener el valor, el método " "tiene en cuenta el signo de ambos argumentos para determinar el cuadrante.\n" "Nota importante: La coordenada Y es la primera, por convención.\n" "[codeblock]\n" "a = atan2(0, -1) # a es 3.141593\n" "[/codeblock]" msgid "" "Returns the hyperbolic arc (also called inverse) tangent of [param x], " "returning a value in radians. Use it to get the angle from an angle's tangent " "in hyperbolic space if [param x] is between -1 and 1 (non-inclusive).\n" "In mathematics, the inverse hyperbolic tangent is only defined for -1 < " "[param x] < 1 in the real set, so values equal or lower to -1 for [param x] " "return negative [constant @GDScript.INF] and values equal or higher than 1 " "return positive [constant @GDScript.INF] in order to prevent [method atanh] " "from returning [constant @GDScript.NAN].\n" "[codeblock]\n" "var a = atanh(0.9) # Returns 1.47221948958322\n" "tanh(a) # Returns 0.9\n" "\n" "var b = atanh(-2) # Returns -inf\n" "tanh(b) # Returns -1\n" "[/codeblock]" msgstr "" "Devuelve la tangente del arco hiperbólico (también llamado inverso) de [param " "x], devolviendo un valor en radianes. Úsalo para obtener el ángulo desde la " "tangente en un ángulo en espacio hiperbólico si [param x] está entre -1 y 1 " "(no inclusivo).\n" "En matemáticas, la inversa de la tangente hiperbólica es solo definida por -1 " "< [param x] <1 en el conjunto real, por lo que valores iguales o menores a -1 " "para [param x] develven [constant @GDScript.INF] negativos y valores iguales " "o mayores a 1 devuelven [constant @GDScript.INF] positivo para prevenir que " "[method atanh] devuelva [constant @GDScript.NAN].\n" "[codeblock]\n" "var a = atanh(0.9) # Devuelve 1.47221948958322\n" "tanh(a) # Devuelve 0.9\n" "\n" "var b = atanh(-2) # Devuelve -inf\n" "tanh(b) # Devuelve -1\n" "[/codeblock]" msgid "" "Returns the derivative at the given [param t] on a one-dimensional " "[url=https://en.wikipedia.org/wiki/B%C3%A9zier_curve]Bézier curve[/url] " "defined by the given [param control_1], [param control_2], and [param end] " "points." msgstr "" "Devuelve el derivado que se le dio a [param t] en un unidimensional " "[url=https://en.wikipedia.org/wiki/B%C3%A9zier_curve]curva de Bézier [/url] " "definida dados los puntos [param control_1], [param control_2], y [param end]." msgid "" "Returns the point at the given [param t] on a one-dimensional [url=https://" "en.wikipedia.org/wiki/B%C3%A9zier_curve]Bézier curve[/url] defined by the " "given [param control_1], [param control_2], and [param end] points." msgstr "" "Devuelve el punto en el [param t] dado en una [url=https://en.wikipedia.org/" "wiki/B%C3%A9zier_curve]curva de Bézier[/url] unidimensional definida por los " "puntos [param control_1], [param control_2] y [param end] dados." msgid "" "Decodes a byte array back to a [Variant] value, without decoding objects.\n" "[b]Note:[/b] If you need object deserialization, see [method " "bytes_to_var_with_objects]." msgstr "" "Decodifica un array de bytes devolviendo el valor [Variant],sin decodificar " "objetos.\n" "[b]Nota:[/b] Si necesitas deserialización de objetos, Véase [method " "bytes_to_var_with_objects]." msgid "" "Decodes a byte array back to a [Variant] value. Decoding objects is allowed.\n" "[b]Warning:[/b] Deserialized object can contain code which gets executed. Do " "not use this option if the serialized object comes from untrusted sources to " "avoid potential security threats (remote code execution)." msgstr "" "Decodifica un array de bytes a un valor [Variant]. Se permite la " "decodificación de objetos.\n" "[b]Advertencia:[/b] El objeto deserializado puede contener código que se " "ejecuta. No utilices esta opción si el objeto serializado proviene de fuentes " "no confiables para evitar posibles amenazas de seguridad (ejecución remota de " "código)." msgid "" "Rounds [param x] upward (towards positive infinity), returning the smallest " "whole number that is not less than [param x]. Supported types: [int], " "[float], [Vector2], [Vector2i], [Vector3], [Vector3i], [Vector4], " "[Vector4i].\n" "[codeblock]\n" "var i = ceil(1.45) # i is 2.0\n" "i = ceil(1.001) # i is 2.0\n" "[/codeblock]\n" "See also [method floor], [method round], and [method snapped].\n" "[b]Note:[/b] For better type safety, use [method ceilf], [method ceili], " "[method Vector2.ceil], [method Vector3.ceil], or [method Vector4.ceil]." msgstr "" "Redondea [param x] hacia arriba (hacia infinito positivo), devolviendo el " "valor entero más pequeño que no es menor que [param x]. Tipos soportados: " "[int], [float], [Vector2], [Vector2i], [Vector3], [Vector3i], [Vector4], " "[Vector4i].\n" "[codeblock]\n" "var i = ceil(1.45) # i es 2.0\n" "i = ceil(1.001) # i es 2.0\n" "[/codeblock]\n" "Véase también [method floor], [method round], y [method snapped].\n" "[b]Nota:[/b] Para una mejor seguridad de tipos, usa [method ceilf], [method " "ceili], [method Vector2.ceil], [method Vector3.ceil] o [method Vector4.ceil]." msgid "" "Rounds [param x] upward (towards positive infinity), returning the smallest " "whole number that is not less than [param x].\n" "A type-safe version of [method ceil], returning a [float]." msgstr "" "Redondea [param x] hacia arriba (hacia el infinito positivo) y devuelve el " "número entero más pequeño que no sea menor que [param x].\n" "Una versión de [method ceil] con seguridad de tipos, que devuelve un [float]." msgid "" "Rounds [param x] upward (towards positive infinity), returning the smallest " "whole number that is not less than [param x].\n" "A type-safe version of [method ceil], returning an [int]." msgstr "" "Redondea [param x] hacia arriba (hacia el infinito positivo) y devuelve el " "número entero más pequeño que no sea menor que [param x].\n" "Una versión de tipo seguro de [method ceil], que devuelve un [int]." msgid "" "Clamps the [param value], returning a [Variant] not less than [param min] and " "not more than [param max]. Any values that can be compared with the less than " "and greater than operators will work.\n" "[codeblock]\n" "var a = clamp(-10, -1, 5)\n" "# a is -1\n" "\n" "var b = clamp(8.1, 0.9, 5.5)\n" "# b is 5.5\n" "[/codeblock]\n" "[b]Note:[/b] For better type safety, use [method clampf], [method clampi], " "[method Vector2.clamp], [method Vector2i.clamp], [method Vector3.clamp], " "[method Vector3i.clamp], [method Vector4.clamp], [method Vector4i.clamp], or " "[method Color.clamp] (not currently supported by this method).\n" "[b]Note:[/b] When using this on vectors it will [i]not[/i] perform component-" "wise clamping, and will pick [param min] if [code]value < min[/code] or " "[param max] if [code]value > max[/code]. To perform component-wise clamping " "use the methods listed above." msgstr "" "Restringe el [param value], devolviendo una [Variant] no menor que [param " "min] y no mayor que [param max]. Cualquier valor que pueda ser comparado con " "los operadores \"menor que\" y \"mayor que\" funcionará.\n" "[codeblock]\n" "var a = clamp(-10, -1, 5)\n" "# a is -1\n" "\n" "var b = clamp(8.1, 0.9, 5.5)\n" "# b is 5.5\n" "[/codeblock]\n" "[b]Nota:[/b] Para mejor seguridad de tipo, utiliza [method clampf], [method " "clampi], [method Vector2.clamp], [method Vector3.clamp], [method " "Vector3i.clamp], [method Vector4.clamp], [method Vector4i.clamp], o [method " "Color.clamp] (Actualmente no compatible con este método).\n" "[b]Nota:[/b] Cuando utilices esto en vectores [i]no[/i] realizará restricción " "de componentes, y elegirá [param min] si [code]value < min[/code] or [param " "max] si [code]value > max[/code]. Para realizar restrición de componentes " "utiliza los metodos listados arriba." msgid "" "Clamps the [param value], returning a [float] not less than [param min] and " "not more than [param max].\n" "[codeblock]\n" "var speed = 42.1\n" "var a = clampf(speed, 1.0, 20.5) # a is 20.5\n" "\n" "speed = -10.0\n" "var b = clampf(speed, -1.0, 1.0) # b is -1.0\n" "[/codeblock]" msgstr "" "Fija el [param value], devolviendo un [float] no menor que [param min] y no " "mayor que [param max].\n" "[codeblock]\n" "var speed = 42.1\n" "var a = clampf(speed, 1.0, 20.5) # a es 20.5\n" "\n" "speed = -10.0\n" "var b = clampf(speed, -1.0, 1.0) # b es -1.0\n" "[/codeblock]" msgid "" "Clamps the [param value], returning an [int] not less than [param min] and " "not more than [param max].\n" "[codeblock]\n" "var speed = 42\n" "var a = clampi(speed, 1, 20) # a is 20\n" "\n" "speed = -10\n" "var b = clampi(speed, -1, 1) # b is -1\n" "[/codeblock]" msgstr "" "Acota el [param value] y devuelve un [int] no menor que [param min] ni mayor " "que [param max].\n" "[codeblock]\n" "var speed = 42\n" "var a = clampi(speed, 1, 20) # a es 20\n" "\n" "speed = -10\n" "var b = clampi(speed, -1, 1) # b es -1\n" "[/codeblock]" msgid "" "Returns the cosine of angle [param angle_rad] in radians.\n" "[codeblock]\n" "cos(PI * 2) # Returns 1.0\n" "cos(PI) # Returns -1.0\n" "cos(deg_to_rad(90)) # Returns 0.0\n" "[/codeblock]" msgstr "" "Devuelve el coseno del ángulo [param angle_rad] en radianes.\n" "[codeblock]\n" "cos(PI * 2) # Devuelve 1.0\n" "cos(PI) # Devuelve -1.0\n" "cos(grados_a_rad(90)) # Devuelve 0.0\n" "[/codeblock]" msgid "" "Returns the hyperbolic cosine of [param x] in radians.\n" "[codeblock]\n" "print(cosh(1)) # Prints 1.543081\n" "[/codeblock]" msgstr "" "Devuelve el coseno hiperbólico de [param x] en radianes.\n" "[codeblock]\n" "print(cosh(1)) # Imprime 1.543081\n" "[/codeblock]" msgid "" "Cubic interpolates between two values by the factor defined in [param weight] " "with [param pre] and [param post] values." msgstr "" "Realiza una interpolación cúbica entre dos valores en base al factor definido " "en [param weight] con los valores de [param pre] y [param post]." msgid "" "Cubic interpolates between two rotation values with shortest path by the " "factor defined in [param weight] with [param pre] and [param post] values. " "See also [method lerp_angle]." msgstr "" "Realiza una interpolación cúbica entre dos valores de rotación con la ruta " "más corta por el factor definido en [param weight] con los valores de [param " "pre] y [param post]. Véase también [method lerp_angle]." msgid "" "Cubic interpolates between two rotation values with shortest path by the " "factor defined in [param weight] with [param pre] and [param post] values. " "See also [method lerp_angle].\n" "It can perform smoother interpolation than [method cubic_interpolate] by the " "time values." msgstr "" "Realiza una interpolación cúbica entre dos valores rotacionales por el camino " "más corto definido por el factor definido en los valores [param weight] con " "[param pre] y [param post]. Véase también [method lerp_angle].\n" "Puede realizar una interpolación mas suave usando valores del tiempo en " "comparación con [method cubic_interpolate]." msgid "" "Cubic interpolates between two values by the factor defined in [param weight] " "with [param pre] and [param post] values.\n" "It can perform smoother interpolation than [method cubic_interpolate] by the " "time values." msgstr "" "Realiza una interpolación cúbica entre dos valores según el factor definido " "en [param weight] con los valores de [param pre] y [param post].\n" "Puede realizar una interpolación más suave que [method cubic_interpolate] por " "valores de tiempo." msgid "Converts from decibels to linear energy (audio)." msgstr "Convierte de decibelios a energía lineal (audio)." msgid "" "Converts an angle expressed in degrees to radians.\n" "[codeblock]\n" "var r = deg_to_rad(180) # r is 3.141593\n" "[/codeblock]" msgstr "" "Convierte un ángulo expresado en grados a radianes.\n" "[codeblock]\n" "var r = deg_to_rad(180) # r is 3.141593\n" "[/codeblock]" msgid "" "Returns an \"eased\" value of [param x] based on an easing function defined " "with [param curve]. This easing function is based on an exponent. The [param " "curve] can be any floating-point number, with specific values leading to the " "following behaviors:\n" "[codeblock lang=text]\n" "- Lower than -1.0 (exclusive): Ease in-out\n" "- -1.0: Linear\n" "- Between -1.0 and 0.0 (exclusive): Ease out-in\n" "- 0.0: Constant\n" "- Between 0.0 to 1.0 (exclusive): Ease out\n" "- 1.0: Linear\n" "- Greater than 1.0 (exclusive): Ease in\n" "[/codeblock]\n" "[url=https://raw.githubusercontent.com/godotengine/godot-docs/master/img/" "ease_cheatsheet.png]ease() curve values cheatsheet[/url]\n" "See also [method smoothstep]. If you need to perform more advanced " "transitions, use [method Tween.interpolate_value]." msgstr "" "Devuelve un valor \"atenuado\" de [param x] basado en una función de " "atenuación definida con [param curve]. Esta función de atenuación se basa en " "un exponente. [param curve] puede ser cualquier número de punto flotante, con " "valores específicos que conducen a los siguientes comportamientos:\n" "[codeblock lang=text]\n" "- Menor que -1.0 (exclusivo): Atenuación de entrada y salida\n" "- -1.0: Lineal\n" "- Entre -1.0 y 0.0 (exclusivo): Atenuación de salida y entrada\n" "- 0.0: Constante\n" "- Entre 0.0 y 1.0 (exclusivo): Atenuación de salida\n" "- 1.0: Lineal\n" "- Mayor que 1.0 (exclusivo): Atenuación de entrada\n" "[/codeblock]\n" "[url=https://raw.githubusercontent.com/godotengine/godot-docs/master/img/" "ease_cheatsheet.png]Hoja de referencia de valores de curva ease()[/url]\n" "Véase también [method smoothstep]. Si necesitas realizar transiciones más " "avanzadas, utiliza [method Tween.interpolate_value]." msgid "" "Returns a human-readable name for the given [enum Error] code.\n" "[codeblock]\n" "print(OK) # Prints 0\n" "print(error_string(OK)) # Prints \"OK\"\n" "print(error_string(ERR_BUSY)) # Prints \"Busy\"\n" "print(error_string(ERR_OUT_OF_MEMORY)) # Prints \"Out of memory\"\n" "[/codeblock]" msgstr "" "Devuelve un nombre entendible para los humanos para el siguiente código [enum " "Error].\n" "[codeblock]\n" "print(OK) " "# Imprime 0\n" "print(error_string(OK)) # Imprime " "\"OK\"\n" "print(error_string(ERR_BUSY)) # Imprime \"Busy\"\n" "print(error_string(ERR_OUT_OF_MEMORY)) # Imprime \"Out of memory\"\n" "[/codeblock]" msgid "" "The natural exponential function. It raises the mathematical constant [i]e[/" "i] to the power of [param x] and returns it.\n" "[i]e[/i] has an approximate value of 2.71828, and can be obtained with " "[code]exp(1)[/code].\n" "For exponents to other bases use the method [method pow].\n" "[codeblock]\n" "var a = exp(2) # Approximately 7.39\n" "[/codeblock]" msgstr "" "La función exponencial natural. Eleva la constante matemática [i]e[/i] a la " "potencia de [param x] y la devuelve.\n" "[i]e[/i] tiene un valor aproximado de 2,71828, y puede obtenerse con " "[code]exp(1)[/code].\n" "Para potencias con otras bases, utiliza el método [method pow].\n" "[codeblock]\n" "var a = exp(2) # Aproximadamente 7.39\n" "[/codeblock]" msgid "" "Rounds [param x] downward (towards negative infinity), returning the largest " "whole number that is not more than [param x]. Supported types: [int], " "[float], [Vector2], [Vector2i], [Vector3], [Vector3i], [Vector4], " "[Vector4i].\n" "[codeblock]\n" "var a = floor(2.99) # a is 2.0\n" "a = floor(-2.99) # a is -3.0\n" "[/codeblock]\n" "See also [method ceil], [method round], and [method snapped].\n" "[b]Note:[/b] For better type safety, use [method floorf], [method floori], " "[method Vector2.floor], [method Vector3.floor], or [method Vector4.floor]." msgstr "" "Redondea [param x] por debajo (hacia el infinito negativo), devolviendo el " "número entero más grande que no es mayor que [param x]. Tipos soportados: " "[int], [float], [Vector2], [Vector2i], [Vector3], [Vector3i], [Vector4], " "[Vector4i].\n" "[codeblock]\n" "var a = floor(2.99) # a es 2.0\n" "a = floor(-2.99) # a es -3.0\n" "[/codeblock]\n" "Véase también: [method ceil], [method round], [method snapped].\n" "[b]Nota:[/b] Para una mayor seguridad con tipos, utiliza [method floorf], " "[method floori], [method Vector2.floor], [method Vector3.floor], o [method " "Vector4.floor]." msgid "" "Rounds [param x] downward (towards negative infinity), returning the largest " "whole number that is not more than [param x].\n" "A type-safe version of [method floor], returning a [float]." msgstr "" "Redondea a [param x] hacia abajo (hacia el negativo infinito), devolviendo el " "número entero de mayor tamaño que no sea superior a [param x].\n" "Una version con tipado seguro de [method floor], que devuelve un [float]." msgid "" "Rounds [param x] downward (towards negative infinity), returning the largest " "whole number that is not more than [param x].\n" "A type-safe version of [method floor], returning an [int].\n" "[b]Note:[/b] This function is [i]not[/i] the same as [code]int(x)[/code], " "which rounds towards 0." msgstr "" "Redondea a [param x] hacia abajo (hacia el negativo infinito), devolviendo el " "número entero de mayor tamaño que no sea superior a [param x].\n" "Una version con tipado seguro de [method floor], que devuelve un [int].\n" "[b]Nota:[/b] Esta función [i]no[/i] es la misma que [code]int(x)[/code], la " "cual redondea hacia 0." msgid "" "Returns the floating-point remainder of [param x] divided by [param y], " "keeping the sign of [param x].\n" "[codeblock]\n" "var remainder = fmod(7, 5.5) # remainder is 1.5\n" "[/codeblock]\n" "For the integer remainder operation, use the [code]%[/code] operator." msgstr "" "Devuelve el residuo punto flotante de [param x] dividido por [param y], " "manteniendo el signo de [param x].\n" "[codeblock]\n" "var residuo = fmod(7, 5.5) # residuo es 1.5\n" "[/codeblock]\n" "Para la operación de residuo de números de tipo integer, utiliza el operador " "[code]%[/code]." msgid "" "Returns the floating-point modulus of [param x] divided by [param y], " "wrapping equally in positive and negative.\n" "[codeblock]\n" "print(\" (x) (fmod(x, 1.5)) (fposmod(x, 1.5))\")\n" "for i in 7:\n" "\tvar x = i * 0.5 - 1.5\n" "\tprint(\"%4.1f %4.1f | %4.1f\" % [x, fmod(x, 1.5), fposmod(x, " "1.5)])\n" "[/codeblock]\n" "Prints:\n" "[codeblock lang=text]\n" " (x) (fmod(x, 1.5)) (fposmod(x, 1.5))\n" "-1.5 -0.0 | 0.0\n" "-1.0 -1.0 | 0.5\n" "-0.5 -0.5 | 1.0\n" " 0.0 0.0 | 0.0\n" " 0.5 0.5 | 0.5\n" " 1.0 1.0 | 1.0\n" " 1.5 0.0 | 0.0\n" "[/codeblock]" msgstr "" "Devuelve el módulo de punto flotante de [param x] dividido por [param y], que " "envuelve por igual en positivo y en negativo.\n" "[codeblock]\n" "print(\" (x) (fmod(x, 1.5)) (fposmod(x, 1.5))\")\n" "for i in 7:\n" "\tvar x = 0.5 * i - 1.5\n" "\tprint(\"%4.1f %4.1f %4.1f\" % [x, fmod(x, 1.5), fposmod(x, " "1.5)])\n" "[/codeblock]\n" "Imprime:\n" "[codeblock lang=text]\n" " (x) (fmod(x, 1.5)) (fposmod(x, 1.5))\n" "-1.5 -0.0 0.0\n" "-1.0 -1.0 0.5\n" "-0.5 -0.5 1.0\n" " 0.0 0.0 0.0\n" " 0.5 0.5 0.5\n" " 1.0 1.0 1.0\n" " 1.5 0.0 0.0\n" "[/codeblock]" msgid "" "Returns the integer hash of the passed [param variable].\n" "[codeblocks]\n" "[gdscript]\n" "print(hash(\"a\")) # Prints 177670\n" "[/gdscript]\n" "[csharp]\n" "GD.Print(GD.Hash(\"a\")); // Prints 177670\n" "[/csharp]\n" "[/codeblocks]" msgstr "" "Devuelve el hash de tipo integer de la variable [param variable] pasada.\n" "[codeblocks]\n" "[gdscript]\n" "print(hash(\"a\")) # Imprime 177670\n" "[/gdscript]\n" "[csharp]\n" "GD.Print(GD.Hash(\"a\")); // Imprime 177670\n" "[/csharp]\n" "[/codeblocks]" msgid "" "Returns the [Object] that corresponds to [param instance_id]. All Objects " "have a unique instance ID. See also [method Object.get_instance_id].\n" "[codeblocks]\n" "[gdscript]\n" "var drink = \"water\"\n" "\n" "func _ready():\n" "\tvar id = get_instance_id()\n" "\tvar instance = instance_from_id(id)\n" "\tprint(instance.drink) # Prints \"water\"\n" "[/gdscript]\n" "[csharp]\n" "public partial class MyNode : Node\n" "{\n" "\tpublic string Drink { get; set; } = \"water\";\n" "\n" "\tpublic override void _Ready()\n" "\t{\n" "\t\tulong id = GetInstanceId();\n" "\t\tvar instance = (MyNode)InstanceFromId(Id);\n" "\t\tGD.Print(instance.Drink); // Prints \"water\"\n" "\t}\n" "}\n" "[/csharp]\n" "[/codeblocks]" msgstr "" "Devuelve el [Object] que corresponde a [param instance_id]. Todos los Objetos " "tienen un ID de instancia único. Véase también [method " "Object.get_instance_id].\n" "[codeblocks]\n" "[gdscript]\n" "var drink = \"water\"\n" "\n" "func _ready():\n" "\tvar id = get_instance_id()\n" "\tvar instance = instance_from_id(id)\n" "\tprint(instance.drink) # Imprime \"water\"\n" "[/gdscript]\n" "[csharp]\n" "public partial class MyNode : Node\n" "{\n" "\tpublic string Drink { get; set; } = \"water\";\n" "\n" "\tpublic override void _Ready()\n" "\t{\n" "\t\tulong id = GetInstanceId();\n" "\t\tvar instance = (MyNode)InstanceFromId(Id);\n" "\t\tGD.Print(instance.Drink); // Imprime \"water\"\n" "\t}\n" "}\n" "[/csharp]\n" "[/codeblocks]" msgid "" "Returns an interpolation or extrapolation factor considering the range " "specified in [param from] and [param to], and the interpolated value " "specified in [param weight]. The returned value will be between [code]0.0[/" "code] and [code]1.0[/code] if [param weight] is between [param from] and " "[param to] (inclusive). If [param weight] is located outside this range, then " "an extrapolation factor will be returned (return value lower than [code]0.0[/" "code] or greater than [code]1.0[/code]). Use [method clamp] on the result of " "[method inverse_lerp] if this is not desired.\n" "[codeblock]\n" "# The interpolation ratio in the `lerp()` call below is 0.75.\n" "var middle = lerp(20, 30, 0.75)\n" "# middle is now 27.5.\n" "\n" "# Now, we pretend to have forgotten the original ratio and want to get it " "back.\n" "var ratio = inverse_lerp(20, 30, 27.5)\n" "# ratio is now 0.75.\n" "[/codeblock]\n" "See also [method lerp], which performs the reverse of this operation, and " "[method remap] to map a continuous series of values to another." msgstr "" "Devuelve un factor de interpolación o extrapolación, considerando el rango " "especificado en [param from] y [param to], y el valor interpolado " "especificado en [param weight]. El valor devuelto estará entre [code]0.0[/" "code] y [code]1.0[/code] si [param weight] está entre [param from] y [param " "to] (inclusivo). Si [param weight] está ubicado fuera de este rango, se " "devolverá un factor de extrapolación (valor de retorno menor que [code]0.0[/" "code] o mayor que [code]1.0[/code]). Utiliza [method clamp] sobre el " "resultado de [method inverse_lerp] si este no es el comportamiento deseado.\n" "[codeblock]\n" "# La razón de interpolación en la llamada a \"lerp()\" de más abajo es 0.75.\n" "var middle = lerp(20, 30, 0.75)\n" "# \"middle\" ahora es 27.5.\n" "\n" "# Ahora, suponemos haber olvidado la razón original y queremos obtenerla de " "vuelta.\n" "var ratio = inverse_lerp(20, 30, 27.5)\n" "# \"ratio\" ahora es 0.75.\n" "[/codeblock]\n" "Véase también [method lerp], el cual ejecuta la operación inversa a esta, y " "[method remap] para mapear una series continua de valores a otros." msgid "" "Returns [code]true[/code] if [param a] and [param b] are approximately equal " "to each other.\n" "Here, \"approximately equal\" means that [param a] and [param b] are within a " "small internal epsilon of each other, which scales with the magnitude of the " "numbers.\n" "Infinity values of the same sign are considered equal." msgstr "" "Devuelve [code]true[/code] si [param a] y [param b] son aproximadamente " "iguales entre sí.\n" "Aquí, \"aproximadamente iguales\" significa que [param a] y [param b] están " "dentro de una pequeña épsilon interna de cada uno, que se escala con la " "magnitud de los números.\n" "Los valores infinitos del mismo signo se consideran iguales." msgid "" "Returns whether [param x] is a finite value, i.e. it is not [constant " "@GDScript.NAN], positive infinity, or negative infinity. See also [method " "is_inf] and [method is_nan]." msgstr "" "Devuelve si [param x] es un valor finito, p. ej., si no es [constant " "@GDScript.NAN], infinito positivo o infinito negativo. Véase también [method " "is_inf] y [method is_nan]." msgid "" "Returns [code]true[/code] if [param x] is either positive infinity or " "negative infinity. See also [method is_finite] and [method is_nan]." msgstr "" "Devuelve [code]true[/code] si [param x] es un valor de infinito (positivo o " "negativo). Véase también [method is_finite] y [method is_nan]." msgid "" "Returns [code]true[/code] if the Object that corresponds to [param id] is a " "valid object (e.g. has not been deleted from memory). All Objects have a " "unique instance ID." msgstr "" "Devuelve [code]true[/code] si el Objeto que corresponde a [param id] es " "valido (p.ej. si no se ha borrado de la memoria). Todos los Objetos tiene un " "ID de instancia único." msgid "" "Returns [code]true[/code] if [param instance] is a valid Object (e.g. has not " "been deleted from memory)." msgstr "" "Devuelve [code]true[/code] si [param instance] es un Objeto válido (p. ej. si " "no ha sido borrado de la memoria)." msgid "" "Returns [code]true[/code] if [param x] is a NaN (\"Not a Number\" or invalid) " "value. This method is needed as [constant @GDScript.NAN] is not equal to " "itself, which means [code]x == NAN[/code] can't be used to check whether a " "value is a NaN." msgstr "" "Devuelve [code]true[/code] si [param x] es un valor NaN (\"Not a Number\" o " "inválido). Este método es necesario porque [constant @GDScript.NAN] no se " "considera equivalente a sí mismo, por lo que [code]x == NAN[/code] no sirve " "para comprobar si un valor es NaN." msgid "" "Returns [code]true[/code], for value types, if [param a] and [param b] share " "the same value. Returns [code]true[/code], for reference types, if the " "references of [param a] and [param b] are the same.\n" "[codeblock]\n" "# Vector2 is a value type\n" "var vec2_a = Vector2(0, 0)\n" "var vec2_b = Vector2(0, 0)\n" "var vec2_c = Vector2(1, 1)\n" "is_same(vec2_a, vec2_a) # true\n" "is_same(vec2_a, vec2_b) # true\n" "is_same(vec2_a, vec2_c) # false\n" "\n" "# Array is a reference type\n" "var arr_a = []\n" "var arr_b = []\n" "is_same(arr_a, arr_a) # true\n" "is_same(arr_a, arr_b) # false\n" "[/codeblock]\n" "These are [Variant] value types: [code]null[/code], [bool], [int], [float], " "[String], [StringName], [Vector2], [Vector2i], [Vector3], [Vector3i], " "[Vector4], [Vector4i], [Rect2], [Rect2i], [Transform2D], [Transform3D], " "[Plane], [Quaternion], [AABB], [Basis], [Projection], [Color], [NodePath], " "[RID], [Callable] and [Signal].\n" "These are [Variant] reference types: [Object], [Dictionary], [Array], " "[PackedByteArray], [PackedInt32Array], [PackedInt64Array], " "[PackedFloat32Array], [PackedFloat64Array], [PackedStringArray], " "[PackedVector2Array], [PackedVector3Array], [PackedVector4Array], and " "[PackedColorArray]." msgstr "" "Devuelve [code]true[/code], para los tipos de valor, si [param a] y [param b] " "comparten el mismo valor. Devuelve [code]true[/code], para los tipos de " "referencia, si las referencias de [param a] y [param b] son iguales.\n" "[codeblock]\n" "# Vector2 es un tipo de valor\n" "var vec2_a = Vector2(0, 0)\n" "var vec2_b = Vector2(0, 0)\n" "var vec2_c = Vector2(1, 1)\n" "is_same(vec2_a, vec2_a) # true\n" "is_same(vec2_a, vec2_b) # true\n" "is_same(vec2_a, vec2_c) # false\n" "\n" "# Array es un tipo de referencia\n" "var arr_a = []\n" "var arr_b = []\n" "is_same(arr_a, arr_a) # true\n" "is_same(arr_a, arr_b) # false\n" "[/codeblock]\n" "Estos son tipos de valores de [Variant]: [code]null[/code], [bool], [int], " "[float], [String], [StringName], [Vector2], [Vector2i], [Vector3], " "[Vector3i], [Vector4], [Vector4i], [Rect2], [Rect2i], [Transform2D], " "[Transform3D], [Plane], [Quaternion], [AABB], [Basis], [Projection], [Color], " "[NodePath], [RID], [Callable] and [Signal].\n" "Estas son [Variant] de tipo de referencia: [Object], [Dictionary], [Array], " "[PackedByteArray], [PackedInt32Array], [PackedInt64Array], " "[PackedFloat32Array], [PackedFloat64Array], [PackedStringArray], " "[PackedVector2Array], [PackedVector3Array],[PackedVector4Array] y " "[PackedColorArray]." msgid "" "Returns [code]true[/code] if [param x] is zero or almost zero. The comparison " "is done using a tolerance calculation with a small internal epsilon.\n" "This function is faster than using [method is_equal_approx] with one value as " "zero." msgstr "" "Devuelve [code]true[/code] si [param x] es cero o casi cero. La comparación " "se hace usando un calculo de tolerancia con un épsilon pequeño interno.\n" "Este método es más rápido que usar [method is_equal_approx] con un valor como " "cero." msgid "" "Linearly interpolates between two values by the factor defined in [param " "weight]. To perform interpolation, [param weight] should be between " "[code]0.0[/code] and [code]1.0[/code] (inclusive). However, values outside " "this range are allowed and can be used to perform [i]extrapolation[/i]. If " "this is not desired, use [method clampf] to limit [param weight].\n" "Both [param from] and [param to] must be the same type. Supported types: " "[int], [float], [Vector2], [Vector3], [Vector4], [Color], [Quaternion], " "[Basis], [Transform2D], [Transform3D].\n" "[codeblock]\n" "lerp(0, 4, 0.75) # Returns 3.0\n" "[/codeblock]\n" "See also [method inverse_lerp] which performs the reverse of this operation. " "To perform eased interpolation with [method lerp], combine it with [method " "ease] or [method smoothstep]. See also [method remap] to map a continuous " "series of values to another.\n" "[b]Note:[/b] For better type safety, use [method lerpf], [method " "Vector2.lerp], [method Vector3.lerp], [method Vector4.lerp], [method " "Color.lerp], [method Quaternion.slerp], [method Basis.slerp], [method " "Transform2D.interpolate_with], or [method Transform3D.interpolate_with]." msgstr "" "Interpola linealmente entre dos valores por un valor definido por [param " "weight]. Para hacer la interpolación [param weight] debe estar en el rango de " "los valores [code]0.0[/code] y [code]1.0[/code] (inclusivo). No obstante, " "valores fuera de este rango también están permitidos y pueden usarse para " "hacer una [i]extrapolación[/i]. Si este no es el comportamiento deseado, usa " "[method clampf] para limitar a [param weight].\n" "Tanto [param from] como [param to] deben de ser del mismo tipo. Tipos " "soportados: [int], [float], [Vector2], [Vector3], [Vector4], [Color], " "[Quaternion], [Basis], [Transform2D], [Transform3D].\n" "[codeblock]\n" "lerp(0, 4, 0.75) # Devuelve 3.0\n" "[/codeblock]\n" "Véase también: [method inverse_lerp], que realiza la operación inversa. Para " "hacer una interpolación de tipo eased con [method lerp], combínalo con " "[method ease] o [method smoothstep]. Véase también: [method remap] para " "mapear un serie continua de valores a otra.\n" "[b]Nota:[/b] Para mejor seguridad con tipos usa [method lerpf], [method " "Vector2.lerp], [method Vector3.lerp], [method Vector4.lerp], [method " "Color.lerp], [method Quaternion.slerp], [method Basis.slerp], [method " "Transform2D.interpolate_with], o [method Transform3D.interpolate_with]." msgid "" "Linearly interpolates between two angles (in radians) by a [param weight] " "value between 0.0 and 1.0.\n" "Similar to [method lerp], but interpolates correctly when the angles wrap " "around [constant @GDScript.TAU]. To perform eased interpolation with [method " "lerp_angle], combine it with [method ease] or [method smoothstep].\n" "[codeblock]\n" "extends Sprite\n" "var elapsed = 0.0\n" "func _process(delta):\n" "\tvar min_angle = deg_to_rad(0.0)\n" "\tvar max_angle = deg_to_rad(90.0)\n" "\trotation = lerp_angle(min_angle, max_angle, elapsed)\n" "\telapsed += delta\n" "[/codeblock]\n" "[b]Note:[/b] This function lerps through the shortest path between [param " "from] and [param to]. However, when these two angles are approximately " "[code]PI + k * TAU[/code] apart for any integer [code]k[/code], it's not " "obvious which way they lerp due to floating-point precision errors. For " "example, [code]lerp_angle(0, PI, weight)[/code] lerps counter-clockwise, " "while [code]lerp_angle(0, PI + 5 * TAU, weight)[/code] lerps clockwise." msgstr "" "Interpola linealmente entre dos ángulos (en radianes) por un valor [param " "weight] entre 0.0 y 1.0.\n" "Similar a [method lerp], pero interpola correctamente cuando los ángulos se " "envuelven alrededor de [constant @GDScript.TAU]. Para realizar una " "interpolación suavizada con [method lerp_angle], combínala con [method ease] " "o [method smoothstep].\n" "[codeblock]\n" "extends Sprite\n" "var elapsed = 0.0\n" "func _process(delta):\n" "\tvar min_angle = deg_to_rad(0.0)\n" "\tvar max_angle = deg_to_rad(90.0)\n" "\trotation = lerp_angle(min_angle, max_angle, elapsed)\n" "\telapsed += delta\n" "[/codeblock]\n" "[b]Nota:[/b] Esta función interpola a través de la ruta más corta entre " "[param from] y [param to]. Sin embargo, cuando estos dos ángulos están " "aproximadamente a [code]PI + k * TAU[/code] de distancia para cualquier " "[code]k[/code] entero, no es obvio de qué manera se interpolan debido a " "errores de precisión de punto flotante. Por ejemplo, [code]lerp_angle(0, PI, " "weight)[/code] interpola en sentido antihorario, mientras que " "[code]lerp_angle(0, PI + 5 * TAU, weight)[/code] interpola en el sentido de " "las agujas del reloj." msgid "" "Linearly interpolates between two values by the factor defined in [param " "weight]. To perform interpolation, [param weight] should be between " "[code]0.0[/code] and [code]1.0[/code] (inclusive). However, values outside " "this range are allowed and can be used to perform [i]extrapolation[/i]. If " "this is not desired, use [method clampf] on the result of this function.\n" "[codeblock]\n" "lerpf(0, 4, 0.75) # Returns 3.0\n" "[/codeblock]\n" "See also [method inverse_lerp] which performs the reverse of this operation. " "To perform eased interpolation with [method lerp], combine it with [method " "ease] or [method smoothstep]." msgstr "" "Interpola linealmente entre dos valores por el factor definido en [param " "weight]. Para realizar la interpolación, [param weight] debe estar entre " "[code]0.0[/code] y [code]1.0[/code] (inclusive). Sin embargo, se permiten " "valores fuera de este rango y se pueden usar para realizar [i]extrapolación[/" "i]. Si esto no es deseado, usa [method clampf] en el resultado de esta " "función.\n" "[codeblock]\n" "lerpf(0, 4, 0.75) # Devuelve 3.0\n" "[/codeblock]\n" "Véase también [method inverse_lerp] que realiza la operación inversa. Para " "realizar una interpolación suavizada con [method lerp], combínala con [method " "ease] o [method smoothstep]." msgid "" "Converts from linear energy to decibels (audio). Since volume is not normally " "linear, this can be used to implement volume sliders that behave as " "expected.\n" "[b]Example:[/b] Change the Master bus's volume through a [Slider] node, which " "ranges from [code]0.0[/code] to [code]1.0[/code]:\n" "[codeblock]\n" "AudioServer.set_bus_volume_db(AudioServer.get_bus_index(\"Master\"), " "linear_to_db($Slider.value))\n" "[/codeblock]" msgstr "" "Convierte energía lineal a decibelios (audio). Dado que el volumen no es " "normalmente lineal, esto se puede usar para implementar controles deslizantes " "de volumen que se comporten como se espera.\n" "[b]Ejemplo:[/b] Cambia el volumen del bus maestro a través de un nodo " "[Slider], que varía de [code]0.0[/code] a [code]1.0[/code]:\n" "[codeblock]\n" "AudioServer.set_bus_volume_db(AudioServer.get_bus_index(\"Master\"), " "linear_to_db($Slider.value))\n" "[/codeblock]" msgid "" "Returns the maximum of the given numeric values. This function can take any " "number of arguments.\n" "[codeblock]\n" "max(1, 7, 3, -6, 5) # Returns 7\n" "[/codeblock]\n" "[b]Note:[/b] When using this on vectors it will [i]not[/i] perform component-" "wise maximum, and will pick the largest value when compared using [code]x < " "y[/code]. To perform component-wise maximum, use [method Vector2.max], " "[method Vector2i.max], [method Vector3.max], [method Vector3i.max], [method " "Vector4.max], and [method Vector4i.max]." msgstr "" "Devuelve el máximo de los valores numéricos dados. Esta función puede tomar " "cualquier número de argumentos.\n" "[codeblock]\n" "max(1, 7, 3, -6, 5) # Devuelve 7\n" "[/codeblock]\n" "[b]Nota:[/b] Al usarse en vectores, [i]no[/i] calculará el máximo por " "componente y elegirá el valor más grande cuando se compare utilizando [code]x " "< y[/code]. Para realizar el máximo por componente, use [method Vector2.max], " "[method Vector2i.max], [method Vector3.max], [method Vector3i.max], [method " "Vector4.max] y [method Vector4i.max]." msgid "" "Returns the maximum of two [float] values.\n" "[codeblock]\n" "maxf(3.6, 24) # Returns 24.0\n" "maxf(-3.99, -4) # Returns -3.99\n" "[/codeblock]" msgstr "" "Devuelve el máximo de dos valores [float].\n" "[codeblock]\n" "maxf(3.6, 24) # Devuelve 24.0\n" "maxf(-3.99, -4) # Devuelve -3.99\n" "[/codeblock]" msgid "" "Returns the maximum of two [int] values.\n" "[codeblock]\n" "maxi(1, 2) # Returns 2\n" "maxi(-3, -4) # Returns -3\n" "[/codeblock]" msgstr "" "Devuelve el máximo de dos valores [int].\n" "[codeblock]\n" "maxi(1, 2) # Devuelve 2\n" "maxi(-3, -4) # Devuelve -3\n" "[/codeblock]" msgid "" "Returns the minimum of the given numeric values. This function can take any " "number of arguments.\n" "[codeblock]\n" "min(1, 7, 3, -6, 5) # Returns -6\n" "[/codeblock]\n" "[b]Note:[/b] When using this on vectors it will [i]not[/i] perform component-" "wise minimum, and will pick the smallest value when compared using [code]x < " "y[/code]. To perform component-wise minimum, use [method Vector2.min], " "[method Vector2i.min], [method Vector3.min], [method Vector3i.min], [method " "Vector4.min], and [method Vector4i.min]." msgstr "" "Devuelve el mínimo de los valores numéricos dados. Esta función puede recibir " "cualquier número de argumentos.\n" "[codeblock]\n" "min(1, 7, 3, -6, 5) # Devuelve -6\n" "[/codeblock]\n" "[b]Nota:[/b] Al usarlo en vectores, [i]no[/i] calculará el mínimo de cada " "componente y elegirá el valor más pequeño cuando se compare utilizando " "[code]x < y[/code]. Para realizar el mínimo de cada componente, use [method " "Vector2.min], [method Vector2i.min], [method Vector3.min], [method " "Vector3i.min], [method Vector4.min] y [method Vector4i.min]." msgid "" "Returns the minimum of two [float] values.\n" "[codeblock]\n" "minf(3.6, 24) # Returns 3.6\n" "minf(-3.99, -4) # Returns -4.0\n" "[/codeblock]" msgstr "" "Devuelve el mínimo de dos valores [float].\n" "[codeblock]\n" "minf(3.6, 24) # Devuelve 3.6\n" "min(-3.99, -4) # Devuelve -4\n" "[/codeblock]" msgid "" "Returns the minimum of two [int] values.\n" "[codeblock]\n" "mini(1, 2) # Returns 1\n" "mini(-3, -4) # Returns -4\n" "[/codeblock]" msgstr "" "Devuelve el mínimo de dos valores [int].\n" "[codeblock]\n" "mini(1, 2) # Devuelve 1\n" "mini(-3, -4) # Devuelve -4\n" "[/codeblock]" msgid "" "Moves [param from] toward [param to] by the [param delta] amount. Will not go " "past [param to].\n" "Use a negative [param delta] value to move away.\n" "[codeblock]\n" "move_toward(5, 10, 4) # Returns 9\n" "move_toward(10, 5, 4) # Returns 6\n" "move_toward(5, 10, 9) # Returns 10\n" "move_toward(10, 5, -1.5) # Returns 11.5\n" "[/codeblock]" msgstr "" "Mueve [param from] hacia [param to] por el valor [param delta]. No se pasara " "del valor [param to]\n" "Usa un valor negativo de [param delta] para mover el valor en sentido " "opuesto.\n" "[codeblock]\n" "move_toward(5, 10, 4) # Devuelve 9\n" "move_toward(10, 5, 4) # Devuelve 6\n" "move_toward(5, 10, 9) # Devuelve 10\n" "move_toward(10, 5, -1.5) # Devuelve 11.5\n" "[/codeblock]" msgid "" "Returns the smallest integer power of 2 that is greater than or equal to " "[param value].\n" "[codeblock]\n" "nearest_po2(3) # Returns 4\n" "nearest_po2(4) # Returns 4\n" "nearest_po2(5) # Returns 8\n" "\n" "nearest_po2(0) # Returns 0 (this may not be expected)\n" "nearest_po2(-1) # Returns 0 (this may not be expected)\n" "[/codeblock]\n" "[b]Warning:[/b] Due to its implementation, this method returns [code]0[/code] " "rather than [code]1[/code] for values less than or equal to [code]0[/code], " "with an exception for [param value] being the smallest negative 64-bit " "integer ([code]-9223372036854775808[/code]) in which case the [param value] " "is returned unchanged." msgstr "" "Devuelve la potencia entera más pequeña de 2 que es mayor o igual que [param " "value].\n" "[codeblock]\n" "nearest_po2(3) # Devuelve 4\n" "nearest_po2(4) # Devuelve 4\n" "nearest_po2(5) # Devuelve 8\n" "\n" "nearest_po2(0) # Devuelve 0 (esto puede no ser lo esperado)\n" "nearest_po2(-1) # Devuelve 0 (esto puede no ser lo esperado)\n" "[/codeblock]\n" "[b]Advertencia:[/b] Debido a su implementación, este método devuelve [code]0[/" "code] en lugar de [code]1[/code] para valores menores o iguales a [code]0[/" "code], con una excepción para [param value] siendo el entero negativo de 64 " "bits más pequeño ([code]-9223372036854775808[/code]) en cuyo caso el [param " "value] se devuelve sin cambios." msgid "" "Wraps [param value] between [code]0[/code] and the [param length]. If the " "limit is reached, the next value the function returns is decreased to the " "[code]0[/code] side or increased to the [param length] side (like a triangle " "wave). If [param length] is less than zero, it becomes positive.\n" "[codeblock]\n" "pingpong(-3.0, 3.0) # Returns 3.0\n" "pingpong(-2.0, 3.0) # Returns 2.0\n" "pingpong(-1.0, 3.0) # Returns 1.0\n" "pingpong(0.0, 3.0) # Returns 0.0\n" "pingpong(1.0, 3.0) # Returns 1.0\n" "pingpong(2.0, 3.0) # Returns 2.0\n" "pingpong(3.0, 3.0) # Returns 3.0\n" "pingpong(4.0, 3.0) # Returns 2.0\n" "pingpong(5.0, 3.0) # Returns 1.0\n" "pingpong(6.0, 3.0) # Returns 0.0\n" "[/codeblock]" msgstr "" "Envuelve a [param value] entre [code]0[/code] y [param length]. Si el límite " "es alcanzado, el siguiente valor que la función devuelva es reducido hacia " "[code]0[/code] o incrementado hacia [param length] (como una ola triangular). " "Si [param length] es menor que cero, se convierte en positivo.\n" "[codeblock]\n" "pingpong(-3.0, 3.0) # Devuelve 3.0\n" "pingpong(-2.0, 3.0) # Devuelve 2.0\n" "pingpong(-1.0, 3.0) # Devuelve 1.0\n" "pingpong(0.0, 3.0) # Devuelve 0.0\n" "pingpong(1.0, 3.0) # Devuelve 1.0\n" "pingpong(2.0, 3.0) # Devuelve 2.0\n" "pingpong(3.0, 3.0) # Devuelve 3.0\n" "pingpong(4.0, 3.0) # Devuelve 2.0\n" "pingpong(5.0, 3.0) # Devuelve 1.0\n" "pingpong(6.0, 3.0) # Devuelve 0.0\n" "[/codeblock]" msgid "" "Returns the integer modulus of [param x] divided by [param y] that wraps " "equally in positive and negative.\n" "[codeblock]\n" "print(\"#(i) (i % 3) (posmod(i, 3))\")\n" "for i in range(-3, 4):\n" "\tprint(\"%2d %2d | %2d\" % [i, i % 3, posmod(i, 3)])\n" "[/codeblock]\n" "Prints:\n" "[codeblock lang=text]\n" "(i) (i % 3) (posmod(i, 3))\n" "-3 0 | 0\n" "-2 -2 | 1\n" "-1 -1 | 2\n" " 0 0 | 0\n" " 1 1 | 1\n" " 2 2 | 2\n" " 3 0 | 0\n" "[/codeblock]" msgstr "" "Devuelve el módulo entero de [param x] dividido por [param y] que se ajusta " "igualmente en positivo y negativo.\n" "[codeblock]\n" "print(\"#(i) (i % 3) (posmod(i, 3))\")\n" "for i in range(-3, 4):\n" "\tprint(\"%2d %2d | %2d\" % [i, i % 3, posmod(i, 3)])\n" "[/codeblock]\n" "Imprime:\n" "[codeblock lang=text]\n" "(i) (i % 3) (posmod(i, 3))\n" "-3 0 | 0\n" "-2 -2 | 1\n" "-1 -1 | 2\n" " 0 0 | 0\n" " 1 1 | 1\n" " 2 2 | 2\n" " 3 0 | 0\n" "[/codeblock]" msgid "" "Returns the result of [param base] raised to the power of [param exp].\n" "In GDScript, this is the equivalent of the [code]**[/code] operator.\n" "[codeblock]\n" "pow(2, 5) # Returns 32.0\n" "pow(4, 1.5) # Returns 8.0\n" "[/codeblock]" msgstr "" "Devuelve el resultado de [param base] elevado a la potencia de [param exp].\n" "En GDScript, esto es el equivalente al operador [code]**[/code].\n" "[codeblock]\n" "pow(2, 5) # Devuelve 32.0\n" "pow(4, 1.5) # Devuelve 8.0\n" "[/codeblock]" msgid "" "Converts one or more arguments of any type to string in the best way possible " "and prints them to the console.\n" "[codeblocks]\n" "[gdscript]\n" "var a = [1, 2, 3]\n" "print(\"a\", \"b\", a) # Prints \"ab[1, 2, 3]\"\n" "[/gdscript]\n" "[csharp]\n" "Godot.Collections.Array a = [1, 2, 3];\n" "GD.Print(\"a\", \"b\", a); // Prints \"ab[1, 2, 3]\"\n" "[/csharp]\n" "[/codeblocks]\n" "[b]Note:[/b] Consider using [method push_error] and [method push_warning] to " "print error and warning messages instead of [method print] or [method " "print_rich]. This distinguishes them from print messages used for debugging " "purposes, while also displaying a stack trace when an error or warning is " "printed. See also [member Engine.print_to_stdout] and [member " "ProjectSettings.application/run/disable_stdout]." msgstr "" "Convierte uno o más argumentos de cualquier tipo a string de la mejor manera " "posible y los imprime en la consola.\n" "[codeblocks]\n" "[gdscript]\n" "var a = [1, 2, 3]\n" "print(\"a\", \"b\", a) # Prints \"ab[1, 2, 3]\"\n" "[/gdscript]\n" "[csharp]\n" "Godot.Collections.Array a = [1, 2, 3];\n" "GD.Print(\"a\", \"b\", a); // Prints \"ab[1, 2, 3]\"\n" "[/csharp]\n" "[/codeblocks]\n" "[b]Note:[/b] Considera usar [method push_error] y [method push_warning] para " "imprimir mensajes de error y advertencia en lugar de [method print] o [method " "print_rich]. Esto los distingue de los mensajes de impresión utilizados para " "fines de depuración, mientras que también muestra un seguimiento de la pila " "cuando se imprime un error o una advertencia. Véase también [member " "Engine.print_to_stdout] y [member ProjectSettings.application/run/" "disable_stdout]." msgid "" "Converts one or more arguments of any type to string in the best way possible " "and prints them to the console.\n" "The following BBCode tags are supported: [code]b[/code], [code]i[/code], " "[code]u[/code], [code]s[/code], [code]indent[/code], [code]code[/code], " "[code]url[/code], [code]center[/code], [code]right[/code], [code]color[/" "code], [code]bgcolor[/code], [code]fgcolor[/code].\n" "URL tags only support URLs wrapped by a URL tag, not URLs with a different " "title.\n" "When printing to standard output, the supported subset of BBCode is converted " "to ANSI escape codes for the terminal emulator to display. Support for ANSI " "escape codes varies across terminal emulators, especially for italic and " "strikethrough. In standard output, [code]code[/code] is represented with " "faint text but without any font change. Unsupported tags are left as-is in " "standard output.\n" "[codeblocks]\n" "[gdscript skip-lint]\n" "print_rich(\"[color=green][b]Hello world![/b][/color]\") # Prints \"Hello " "world!\", in green with a bold font.\n" "[/gdscript]\n" "[csharp skip-lint]\n" "GD.PrintRich(\"[color=green][b]Hello world![/b][/color]\"); // Prints \"Hello " "world!\", in green with a bold font.\n" "[/csharp]\n" "[/codeblocks]\n" "[b]Note:[/b] Consider using [method push_error] and [method push_warning] to " "print error and warning messages instead of [method print] or [method " "print_rich]. This distinguishes them from print messages used for debugging " "purposes, while also displaying a stack trace when an error or warning is " "printed.\n" "[b]Note:[/b] Output displayed in the editor supports clickable [code skip-" "lint][url=address]text[/url][/code] tags. The [code skip-lint][url][/code] " "tag's [code]address[/code] value is handled by [method OS.shell_open] when " "clicked." msgstr "" "Convierte uno o más argumentos de cualquier tipo en una string de la mejor " "manera posible y los imprime en la consola.\n" "Se admiten las siguientes etiquetas BBCode: [code]b[/code], [code]i[/code], " "[code]u[/code], [code]s[/code], [code]indent[/code], [code]code[/code], " "[code]url[/code], [code]center[/code], [code]right[/code], [code]color[/" "code], [code]bgcolor[/code], [code]fgcolor[/code].\n" "Las etiquetas URL solo admiten URL envueltas por una etiqueta URL, no así URL " "con un título diferente.\n" "Al imprimir en la salida estándar, el subconjunto compatible de BBCode se " "convierte en códigos de escape ANSI para que el emulador de terminal los " "muestre. La compatibilidad con los códigos de escape ANSI varía entre los " "emuladores de terminal, especialmente para cursiva y tachado. En la salida " "estándar, [code]code[/code] se representa con texto tenue pero sin ningún " "cambio de fuente. Las etiquetas no compatibles se dejan tal como están en la " "salida estándar.\n" "[codeblocks]\n" "[gdscript skip-lint]\n" "print_rich(\"[color=green][b]¡Hola mundo![/b][/color]\") # Imprime \"¡Hola " "mundo!\" en verde con una fuente en negrita\n" "[/gdscript]\n" "[csharp skip-lint]\n" "GD.PrintRich(\"[color=green][b]¡Hola mundo![/b][/color]\"); // Imprime " "\"¡Hola mundo!\" en verde con una fuente en negrita\n" "[/csharp]\n" "[/codeblocks]\n" "[b]Nota:[/b] Considera usar [method push_error] y [method push_warning] para " "imprimir mensajes de error y advertencia en lugar de [method print] o [method " "print_rich]. Esto los distingue de los mensajes de impresión utilizados para " "fines de depuración, mientras que también muestra un seguimiento de la pila " "cuando se imprime un error o una advertencia.\n" "[b]Nota:[/b] La salida que se muestra en el editor admite etiquetas [code " "skip-lint][url=address]texto[/url][/code] en las que se puede hacer clic. El " "valor [code]address[/code] de la etiqueta [code skip-lint][url][/code] es " "manejado por [method OS.shell_open] cuando se hace clic en ella." msgid "" "If verbose mode is enabled ([method OS.is_stdout_verbose] returning " "[code]true[/code]), converts one or more arguments of any type to string in " "the best way possible and prints them to the console." msgstr "" "Si el modo detallado (verbose mode) está habilitado ([method " "OS.is_stdout_verbose] devolverá [code]true[/code]), convierte uno o más " "argumentos de cualquier tipo en una string de la mejor manera posible y los " "imprime en la consola." msgid "" "Prints one or more arguments to strings in the best way possible to standard " "error line.\n" "[codeblocks]\n" "[gdscript]\n" "printerr(\"prints to stderr\")\n" "[/gdscript]\n" "[csharp]\n" "GD.PrintErr(\"prints to stderr\");\n" "[/csharp]\n" "[/codeblocks]" msgstr "" "Imprime uno o más argumentos como strings de la mejor manera posible a la " "línea de error estándar.\n" "[codeblocks]\n" "[gdscript]\n" "printerr(\"Imprime a stderr\")\n" "[/gdscript]\n" "[csharp]\n" "GD.PrintErr(\"Imprime a stderr\");\n" "[/csharp]\n" "[/codeblocks]" msgid "" "Prints one or more arguments to strings in the best way possible to the OS " "terminal. Unlike [method print], no newline is automatically added at the " "end.\n" "[b]Note:[/b] The OS terminal is [i]not[/i] the same as the editor's Output " "dock. The output sent to the OS terminal can be seen when running Godot from " "a terminal. On Windows, this requires using the [code]console.exe[/code] " "executable.\n" "[codeblocks]\n" "[gdscript]\n" "# Prints \"ABC\" to terminal.\n" "printraw(\"A\")\n" "printraw(\"B\")\n" "printraw(\"C\")\n" "[/gdscript]\n" "[csharp]\n" "// Prints \"ABC\" to terminal.\n" "GD.PrintRaw(\"A\");\n" "GD.PrintRaw(\"B\");\n" "GD.PrintRaw(\"C\");\n" "[/csharp]\n" "[/codeblocks]" msgstr "" "Imprime uno o más argumentos como strings de la mejor manera posible en la " "terminal del SO. A diferencia de [method print], no se añade automáticamente " "una nueva línea al final.\n" "[b]Nota:[/b] El terminal del SO [i]no[/i] es el mismo que el dock de salida " "del editor. La salida enviada al terminal del SO se puede ver al ejecutar " "Godot desde un terminal. En Windows, esto requiere el uso del ejecutable " "[code]console.exe[/code].\n" "[codeblocks]\n" "[gdscript]\n" "# Imprime \"ABC\" en la terminal.\n" "printraw(\"A\")\n" "printraw(\"B\")\n" "printraw(\"C\")\n" "[/gdscript]\n" "[csharp]\n" "// Imprime \"ABC\" en la terminal.\n" "GD.PrintRaw(\"A\");\n" "GD.PrintRaw(\"B\");\n" "GD.PrintRaw(\"C\");\n" "[/csharp]\n" "[/codeblocks]" msgid "" "Prints one or more arguments to the console with a space between each " "argument.\n" "[codeblocks]\n" "[gdscript]\n" "prints(\"A\", \"B\", \"C\") # Prints \"A B C\"\n" "[/gdscript]\n" "[csharp]\n" "GD.PrintS(\"A\", \"B\", \"C\"); // Prints \"A B C\"\n" "[/csharp]\n" "[/codeblocks]" msgstr "" "Imprime uno o más argumentos en la consola con un espacio entre cada " "argumento.\n" "[codeblocks]\n" "[gdscript]\n" "prints(\"A\", \"B\", \"C\") # Imprime \"A B C\"\n" "[/gdscript]\n" "[csharp]\n" "GD.PrintS(\"A\",\"B\",\"C\"); // Imprime \"A B C\"\n" "[/csharp]\n" "[/codeblocks]" msgid "" "Prints one or more arguments to the console with a tab between each " "argument.\n" "[codeblocks]\n" "[gdscript]\n" "printt(\"A\", \"B\", \"C\") # Prints \"A B C\"\n" "[/gdscript]\n" "[csharp]\n" "GD.PrintT(\"A\", \"B\", \"C\"); // Prints \"A B C\"\n" "[/csharp]\n" "[/codeblocks]" msgstr "" "Imprime uno o más argumentos en la consola con una tabulación entre cada " "argumento.\n" "[codeblocks]\n" "[gdscript]\n" "printt(\"A\", \"B\", \"C\") # Imprime \"A\tB\tC\"\n" "[/gdscript]\n" "[csharp]\n" "GD.PrintT(\"A\", \"B\", \"C\"); // Imprime \"A\tB\tC\"\n" "[/csharp]\n" "[/codeblocks]" msgid "" "Pushes an error message to Godot's built-in debugger and to the OS terminal.\n" "[codeblocks]\n" "[gdscript]\n" "push_error(\"test error\") # Prints \"test error\" to debugger and terminal " "as an error.\n" "[/gdscript]\n" "[csharp]\n" "GD.PushError(\"test error\"); // Prints \"test error\" to debugger and " "terminal as an error.\n" "[/csharp]\n" "[/codeblocks]\n" "[b]Note:[/b] This function does not pause project execution. To print an " "error message and pause project execution in debug builds, use " "[code]assert(false, \"test error\")[/code] instead." msgstr "" "Envía un mensaje de error al depurador incorporado de Godot y a la terminal " "del sistema operativo.\n" "[codeblocks]\n" "[gdscript]\n" "push_error(\"error de prueba\") # Imprime \"error de prueba\" en el depurador " "y la terminal como un error.\n" "[/gdscript]\n" "[csharp]\n" "GD.PushError(\"error de prueba\"); // Imprime \"error de prueba\" en el " "depurador y la terminal como un error.\n" "[/csharp]\n" "[/codeblocks]\n" "[b]Nota:[/b] Esta función no pausa la ejecución del proyecto. Para imprimir " "un mensaje de error y pausar la ejecución del proyecto en compilaciones de " "depuración, usa [code]assert(false, \"test error\")[/code] en su lugar." msgid "" "Pushes a warning message to Godot's built-in debugger and to the OS " "terminal.\n" "[codeblocks]\n" "[gdscript]\n" "push_warning(\"test warning\") # Prints \"test warning\" to debugger and " "terminal as a warning.\n" "[/gdscript]\n" "[csharp]\n" "GD.PushWarning(\"test warning\"); // Prints \"test warning\" to debugger and " "terminal as a warning.\n" "[/csharp]\n" "[/codeblocks]" msgstr "" "Envía un mensaje de advertencia al depurador incorporado de Godot y a la " "terminal del sistema operativo.\n" "[codeblocks]\n" "[gdscript]\n" "push_warning(\"test warning\") # Imprime \"test warning\" en depurador y la " "terminal como una advertencia.\n" "[/gdscript]\n" "[csharp]\n" "GD.PushWarning(\"test warning\"); // Imprime \"test warning\" en depurador y " "la terminal como una advertencia.\n" "[/csharp]\n" "[/codeblocks]" msgid "" "Converts an angle expressed in radians to degrees.\n" "[codeblock]\n" "rad_to_deg(0.523599) # Returns 30\n" "rad_to_deg(PI) # Returns 180\n" "rad_to_deg(PI * 2) # Returns 360\n" "[/codeblock]" msgstr "" "Convierte un ángulo expresado en radianes a grados.\n" "[codeblock]\n" "rad_to_deg(0.523599) # Devuelve 30.0\n" "rad_to_deg(PI) # Devuelve 180\n" "rad_to_deg(PI * 2) # Devuelve 360\n" "[/codeblock]" msgid "" "Given a [param seed], returns a [PackedInt64Array] of size [code]2[/code], " "where its first element is the randomized [int] value, and the second element " "is the same as [param seed]. Passing the same [param seed] consistently " "returns the same array.\n" "[b]Note:[/b] \"Seed\" here refers to the internal state of the pseudo random " "number generator, currently implemented as a 64 bit integer.\n" "[codeblock]\n" "var a = rand_from_seed(4)\n" "\n" "print(a[0]) # Prints 2879024997\n" "print(a[1]) # Prints 4\n" "[/codeblock]" msgstr "" "Dado un [param seed], devuelve un [PackedInt64Array] de tamaño [code]2[/" "code], donde su primer elemento es el valor aleatorio [int], y el segundo " "elemento es el mismo que [param seed]. Pasar el mismo [param seed] devuelve " "consistentemente el mismo array.\n" "[b]Nota:[/b] \"Seed\" aquí se refiere al estado interno del generador de " "números pseudoaleatorios, actualmente implementado como un entero de 64 " "bits.\n" "[codeblock]\n" "var a = rand_from_seed(4)\n" "\n" "print(a[0]) # Imprime 2879024997\n" "print(a[1]) # Imprime 4\n" "[/codeblock]" msgid "" "Returns a random floating-point value between [code]0.0[/code] and [code]1.0[/" "code] (inclusive).\n" "[codeblocks]\n" "[gdscript]\n" "randf() # Returns e.g. 0.375671\n" "[/gdscript]\n" "[csharp]\n" "GD.Randf(); // Returns e.g. 0.375671\n" "[/csharp]\n" "[/codeblocks]" msgstr "" "Devuelve un valor de punto flotante aleatorio entre [code]0.0[/code] y " "[code]1.0[/code] (inclusive).\n" "[codeblocks]\n" "[gdscript]\n" "randf() # Devuelve p. ej. 0.375671\n" "[/gdscript]\n" "[csharp]\n" "GD.Randf(); // Devuelve p. ej. 0.375671\n" "[/csharp]\n" "[/codeblocks]" msgid "" "Returns a random floating-point value between [param from] and [param to] " "(inclusive).\n" "[codeblocks]\n" "[gdscript]\n" "randf_range(0, 20.5) # Returns e.g. 7.45315\n" "randf_range(-10, 10) # Returns e.g. -3.844535\n" "[/gdscript]\n" "[csharp]\n" "GD.RandRange(0.0, 20.5); // Returns e.g. 7.45315\n" "GD.RandRange(-10.0, 10.0); // Returns e.g. -3.844535\n" "[/csharp]\n" "[/codeblocks]" msgstr "" "Devuelve un valor de punto flotante aleatorio entre [param from] y [param to] " "(inclusive).\n" "[codeblocks]\n" "[gdscript]\n" "randf_range(0, 20.5) # Devuelve p. ej. 7.45315\n" "randf_range(-10, 10) # Devuelve p.ej. -3.844535\n" "[/gdscript]\n" "[csharp]\n" "GD.RandRange(0.0, 20.5); // Devuelve p. ej. 7.45315\n" "GD.RandRange(-10.0, 10.0); // Devuelve p. ej. -3.844535\n" "[/csharp]\n" "[/codeblocks]" msgid "" "Returns a [url=https://en.wikipedia.org/wiki/Normal_distribution]normally-" "distributed[/url], pseudo-random floating-point value from the specified " "[param mean] and a standard [param deviation]. This is also known as a " "Gaussian distribution.\n" "[b]Note:[/b] This method uses the [url=https://en.wikipedia.org/wiki/" "Box%E2%80%93Muller_transform]Box-Muller transform[/url] algorithm." msgstr "" "Genera un número pseudoaleatorio [url=https://en.wikipedia.org/wiki/" "Normal_distribution]distribuido normalmente[/url], utilizando la " "transformación Box-Muller con el [param mean] especificado y una [param " "deviation] estándar. Esto también se denomina como distribución gaussiana.\n" "[b]Nota:[/b] Este método usa el algoritmo [url=https://en.wikipedia.org/wiki/" "Box%E2%80%93Muller_transform]Box-Muller[/url]." msgid "" "Returns a random unsigned 32-bit integer. Use remainder to obtain a random " "value in the interval [code][0, N - 1][/code] (where N is smaller than " "2^32).\n" "[codeblocks]\n" "[gdscript]\n" "randi() # Returns random integer between 0 and 2^32 - 1\n" "randi() % 20 # Returns random integer between 0 and 19\n" "randi() % 100 # Returns random integer between 0 and 99\n" "randi() % 100 + 1 # Returns random integer between 1 and 100\n" "[/gdscript]\n" "[csharp]\n" "GD.Randi(); // Returns random integer between 0 and 2^32 - 1\n" "GD.Randi() % 20; // Returns random integer between 0 and 19\n" "GD.Randi() % 100; // Returns random integer between 0 and 99\n" "GD.Randi() % 100 + 1; // Returns random integer between 1 and 100\n" "[/csharp]\n" "[/codeblocks]" msgstr "" "Devuelve un entero aleatorio sin signo de 32 bits. Utiliza el residuo para " "obtener un valor aleatorio en el intervalo [code][0, N - 1][/code] (donde N " "es menor que 2^32).\n" "[codeblocks]\n" "[gdscript]\n" "randi() # Devuelve un entero aleatorio entre 0 y 2^32 - 1.\n" "randi() % 20 # Devuelve un entero aleatorio entre 0 y 19.\n" "randi() % 100 # Devuelve un entero aleatorio entre 0 y 99.\n" "randi() % 100 + 1 # Devuelve un entero aleatoria entre 1 y 100\n" "[/gdscript]\n" "[csharp]\n" "GD.Randi(); // Devuelve un entero aleatorio entre 0 y 2^32 - 1.\n" "GD.Randi() % 20; // Devuelve un entero aleatorio entre 0 y 19.\n" "GD.Randi() % 100; // Devuelve un entero aleatorio entre 0 y 99.\n" "GD.Randi() % 100 + 1; // Devuelve un entero aleatoria entre 1 y 100\n" "[/csharp]\n" "[/codeblocks]" msgid "" "Returns a random signed 32-bit integer between [param from] and [param to] " "(inclusive). If [param to] is lesser than [param from], they are swapped.\n" "[codeblocks]\n" "[gdscript]\n" "randi_range(0, 1) # Returns either 0 or 1\n" "randi_range(-10, 1000) # Returns random integer between -10 and 1000\n" "[/gdscript]\n" "[csharp]\n" "GD.RandRange(0, 1); // Returns either 0 or 1\n" "GD.RandRange(-10, 1000); // Returns random integer between -10 and 1000\n" "[/csharp]\n" "[/codeblocks]" msgstr "" "Devuelve un entero aleatorio con signo de 32 bits en el rango de [param from] " "hasta [param to] (inclusivo). Si [param to] es menor que [param from], se " "intercambian.\n" "[codeblocks]\n" "[gdscript]\n" "randi_range(0, 1) # Devuelve el valor 0 o 1\n" "randi_range(-10, 1000) # Devuelve un entero aleatorio entre -10 y 1000\n" "[/gdscript]\n" "[csharp]\n" "GD.RandRange(0, 1); // Devuelve el valor 0 o 1\n" "GD.RandRange(-10, 1000); // Devuelve un entero aleatorio entre -10 y 1000\n" "[/csharp]\n" "[/codeblocks]" msgid "" "Randomizes the seed (or the internal state) of the random number generator. " "The current implementation uses a number based on the device's time.\n" "[b]Note:[/b] This function is called automatically when the project is run. " "If you need to fix the seed to have consistent, reproducible results, use " "[method seed] to initialize the random number generator." msgstr "" "Aleatorizar la semilla (o el estado interno) del generador de números " "aleatorios. Es una implementación actual que utiliza un número basado en el " "tiempo del dispositivo.\n" "[b]Nota:[/b] Esta función es llamada automáticamente cuando se ejecuta el " "proyecto. Si se necesita arreglar la semilla para mas consistencia o " "reproducir resultados, usa [method seed] para inicializar el generador de " "números aleatorios." msgid "" "Maps a [param value] from range [code][istart, istop][/code] to [code]" "[ostart, ostop][/code]. See also [method lerp] and [method inverse_lerp]. If " "[param value] is outside [code][istart, istop][/code], then the resulting " "value will also be outside [code][ostart, ostop][/code]. If this is not " "desired, use [method clamp] on the result of this function.\n" "[codeblock]\n" "remap(75, 0, 100, -1, 1) # Returns 0.5\n" "[/codeblock]\n" "For complex use cases where multiple ranges are needed, consider using " "[Curve] or [Gradient] instead.\n" "[b]Note:[/b] If [code]istart == istop[/code], the return value is undefined " "(most likely NaN, INF, or -INF)." msgstr "" "Mapea un [param value] en un rango de [code][istart, istop][/code] a [code]" "[ostart, ostop][/code]. Véase también [method lerp] y [method inverse_lerp]. " "Si [param value] esta afuera [code][istart, istop][/code], entonces el valor " "resultante también estara fuera [code][ostart, ostop][/code]. Si esto no es " "lo deseado, use [method clamp] en el resultado de esta función.\n" "[codeblock]\n" "remap(75, 0, 100, -1, 1) #Devuelve 0.5\n" "[/codeblock]\n" "Para casos mas complejos en donde se requieran multiples rangos, considera " "utilizar [Curve] o [Gradient] en su lugar.\n" "[b]Nota:[/b] Si [code]istart == istop[/code], el valor devuelto es indefinido " "(probablemente NaN, INF, o -INF)." msgid "" "Allocates a unique ID which can be used by the implementation to construct an " "RID. This is used mainly from native extensions to implement servers." msgstr "" "Asigna un ID único que puede se usado por la implementación para la " "construcción de un RID. Esto se utiliza principalmente desde extensiones " "nativas para implementar en servidores." msgid "" "Creates an RID from a [param base]. This is used mainly from native " "extensions to build servers." msgstr "" "Crea un RID a partir de un [param base]. Esto es usado principalmente por " "extensiones nativas para la constricción de servidores." msgid "" "Rotates [param from] toward [param to] by the [param delta] amount. Will not " "go past [param to].\n" "Similar to [method move_toward], but interpolates correctly when the angles " "wrap around [constant @GDScript.TAU].\n" "If [param delta] is negative, this function will rotate away from [param to], " "toward the opposite angle, and will not go past the opposite angle." msgstr "" "Gira [param from] hacia [param to] en la cantidad de [param delta]. No pasará " "de [param to].\n" "Similar a [method move_toward], pero se interpola correctamente cuando los " "ángulos se ajustan a [constant @GDScript.TAU].\n" "Si [param delta] es negativo, esta función se alejará de [param to], hacia el " "ángulo opuesto y no pasará del ángulo opuesto." msgid "" "Rounds [param x] to the nearest whole number, with halfway cases rounded away " "from 0. Supported types: [int], [float], [Vector2], [Vector2i], [Vector3], " "[Vector3i], [Vector4], [Vector4i].\n" "[codeblock]\n" "round(2.4) # Returns 2\n" "round(2.5) # Returns 3\n" "round(2.6) # Returns 3\n" "[/codeblock]\n" "See also [method floor], [method ceil], and [method snapped].\n" "[b]Note:[/b] For better type safety, use [method roundf], [method roundi], " "[method Vector2.round], [method Vector3.round], or [method Vector4.round]." msgstr "" "Redondea [param x] al número entero más cercano, con los casos intermedios " "redondeados a partir de 0. Datos soportados: [int], [float], [Vector2], " "[Vector2i], [Vector3], [Vector3i], [Vector4], [Vector4i].\n" "[codeblock]\n" "round(2.4) # Devuelve 2\n" "round(2.5) # Devuelve 3\n" "round(2.6) # Devuelve 3\n" "[/codeblock]\n" "Véase también [method floor], [method ceil], y [method snapped].\n" "[b]Nota:[/b] Para un mejor tipado seguro, use [method roundf], [method " "roundi], [method Vector2.round], [method Vector3.round], o [method " "Vector4.round]." msgid "" "Rounds [param x] to the nearest whole number, with halfway cases rounded away " "from 0.\n" "A type-safe version of [method round], returning a [float]." msgstr "" "Redondea [param x] al número entero mas cercano, con los casos intermedios " "redondeados a partir de 0.\n" "Es una version de tipado seguro del [method round] , retorna un [float]." msgid "" "Rounds [param x] to the nearest whole number, with halfway cases rounded away " "from 0.\n" "A type-safe version of [method round], returning an [int]." msgstr "" "Redondea [param x] al número entero mas cercano, con los casos intermedios " "redondeados a partir de 0.\n" "Es una version de tipado seguro del [method round] , retorna un [int]." msgid "" "Sets the seed for the random number generator to [param base]. Setting the " "seed manually can ensure consistent, repeatable results for most random " "functions.\n" "[codeblocks]\n" "[gdscript]\n" "var my_seed = \"Godot Rocks\".hash()\n" "seed(my_seed)\n" "var a = randf() + randi()\n" "seed(my_seed)\n" "var b = randf() + randi()\n" "# a and b are now identical\n" "[/gdscript]\n" "[csharp]\n" "ulong mySeed = (ulong)GD.Hash(\"Godot Rocks\");\n" "GD.Seed(mySeed);\n" "var a = GD.Randf() + GD.Randi();\n" "GD.Seed(mySeed);\n" "var b = GD.Randf() + GD.Randi();\n" "// a and b are now identical\n" "[/csharp]\n" "[/codeblocks]" msgstr "" "Establece la semilla para el generador de números aleatorios en [param base]. " "Configurar la semilla manualmente puede garantizar resultados consistentes y " "repetibles para la mayoría de los casos aleatorios. functions.\n" "[codeblocks]\n" "[gdscript]\n" "var my_seed = \"Godot Rocks\".hash()\n" "seed(my_seed)\n" "var a = randf() + randi()\n" "seed(my_seed)\n" "var b = randf() + randi()\n" "# a and b are now identical\n" "[/gdscript]\n" "[csharp]\n" "ulong mySeed = (ulong)GD.Hash(\"Godot Rocks\");\n" "GD.Seed(mySeed);\n" "var a = GD.Randf() + GD.Randi();\n" "GD.Seed(mySeed);\n" "var b = GD.Randf() + GD.Randi();\n" "// a and b are now identical\n" "[/csharp]\n" "[/codeblocks]" msgid "" "Returns the same type of [Variant] as [param x], with [code]-1[/code] for " "negative values, [code]1[/code] for positive values, and [code]0[/code] for " "zeros. For [code]nan[/code] values it returns 0.\n" "Supported types: [int], [float], [Vector2], [Vector2i], [Vector3], " "[Vector3i], [Vector4], [Vector4i].\n" "[codeblock]\n" "sign(-6.0) # Returns -1\n" "sign(0.0) # Returns 0\n" "sign(6.0) # Returns 1\n" "sign(NAN) # Returns 0\n" "\n" "sign(Vector3(-6.0, 0.0, 6.0)) # Returns (-1, 0, 1)\n" "[/codeblock]\n" "[b]Note:[/b] For better type safety, use [method signf], [method signi], " "[method Vector2.sign], [method Vector2i.sign], [method Vector3.sign], [method " "Vector3i.sign], [method Vector4.sign], or [method Vector4i.sign]." msgstr "" "Devuelve el mismo [Variant] como [param x], dando [code]-1[/code] para " "valores negativos, [code]1[/code] para valores positivos y [code]0[/code] " "para cero. Para los valores [code]NaN[/code] (No es un Número) devuelve " "cero.\n" "Tipos soportados [int], [float], [Vector2], [Vector2i], [Vector3], " "[Vector3i], [Vector4], [Vector4i].\n" "[codeblock]\n" "sign(-6.0) # Devuelve-1\n" "sign(0.0) # Devuelve 0\n" "sign(6.0) # Devuelve 1\n" "sign(NAN) # Devuelve 0\n" "\n" "sign(Vector3(-6.0, 0.0, 6.0)) # Devuelve (-1, 0, 1)\n" "[/codeblock]\n" "[b]Nota[/b] Para mejor seguridad en los tipos, use [method signf], [method " "signi], [method Vector2.sign], [method Vector2i.sign], [method Vector3.sign], " "[method Vector3i.sign], [method Vector4.sign], o [method Vector4i.sign]." msgid "" "Returns [code]-1.0[/code] if [param x] is negative, [code]1.0[/code] if " "[param x] is positive, and [code]0.0[/code] if [param x] is zero. For " "[code]nan[/code] values of [param x] it returns 0.0.\n" "[codeblock]\n" "signf(-6.5) # Returns -1.0\n" "signf(0.0) # Returns 0.0\n" "signf(6.5) # Returns 1.0\n" "signf(NAN) # Returns 0.0\n" "[/codeblock]" msgstr "" "Devuelve [code]-1.0[/code] si [param x] es negativo, [code]1.0[/code] si es " "[param x] positivo y [code]0.0[/code] si [param x] es igual a cero. Para " "valores [code]nan[/code] de [param x], devuelve 0.0.\n" "[codeblock]\n" "sign(-6.5) # Devuelve -1.0\n" "sign(0.0) # Devuelve 0.0\n" "sign(6.5) # Devuelve 1.0\n" "signf(NAN) # Devuelve 0.0\n" "[/codeblock]" msgid "" "Returns [code]-1[/code] if [param x] is negative, [code]1[/code] if [param x] " "is positive, and [code]0[/code] if [param x] is zero.\n" "[codeblock]\n" "signi(-6) # Returns -1\n" "signi(0) # Returns 0\n" "signi(6) # Returns 1\n" "[/codeblock]" msgstr "" "Devuelve [code]-1[/code] si [param x] es un valor negativo, [code]1[/code] si " "[param x] es positivo y [code]0[/code] cuando [param x] es igual a cero.\n" "[codeblock]\n" "sign(-6) # Devuelve -1\n" "sign(0) # Devuelve 0\n" "sign(6) # Devuelve 1\n" "[/codeblock]" msgid "" "Returns the sine of angle [param angle_rad] in radians.\n" "[codeblock]\n" "sin(0.523599) # Returns 0.5\n" "sin(deg_to_rad(90)) # Returns 1.0\n" "[/codeblock]" msgstr "" "Devuelve el seno de un angulo [param angle_rad] en radianes.\n" "[codeblock]\n" "sin(0.523599) # Devuelve 0.5\n" "sin(deg_to_rad(90)) # Devuelve 1.0\n" "[/codeblock]" msgid "" "Returns the hyperbolic sine of [param x].\n" "[codeblock]\n" "var a = log(2.0) # Returns 0.693147\n" "sinh(a) # Returns 0.75\n" "[/codeblock]" msgstr "" "Devuelve el seno hiperbolico de [param x].\n" "[codeblock]\n" "var a = log(2.0) # Devuelve 0.693147\n" "sinh(a) # Devuelve 0.75\n" "[/codeblock]" msgid "" "Returns a smooth cubic Hermite interpolation between [code]0[/code] and " "[code]1[/code].\n" "For positive ranges (when [code]from <= to[/code]) the return value is " "[code]0[/code] when [code]x <= from[/code], and [code]1[/code] when [code]x " ">= to[/code]. If [param x] lies between [param from] and [param to], the " "return value follows an S-shaped curve that smoothly transitions from " "[code]0[/code] to [code]1[/code].\n" "For negative ranges (when [code]from > to[/code]) the function is mirrored " "and returns [code]1[/code] when [code]x <= to[/code] and [code]0[/code] when " "[code]x >= from[/code].\n" "This S-shaped curve is the cubic Hermite interpolator, given by [code]f(y) = " "3*y^2 - 2*y^3[/code] where [code]y = (x-from) / (to-from)[/code].\n" "[codeblock]\n" "smoothstep(0, 2, -5.0) # Returns 0.0\n" "smoothstep(0, 2, 0.5) # Returns 0.15625\n" "smoothstep(0, 2, 1.0) # Returns 0.5\n" "smoothstep(0, 2, 2.0) # Returns 1.0\n" "[/codeblock]\n" "Compared to [method ease] with a curve value of [code]-1.6521[/code], [method " "smoothstep] returns the smoothest possible curve with no sudden changes in " "the derivative. If you need to perform more advanced transitions, use [Tween] " "or [AnimationPlayer].\n" "[url=https://raw.githubusercontent.com/godotengine/godot-docs/master/img/" "smoothstep_ease_comparison.png]Comparison between smoothstep() and ease(x, " "-1.6521) return values[/url]\n" "[url=https://raw.githubusercontent.com/godotengine/godot-docs/master/img/" "smoothstep_range.webp]Smoothstep() return values with positive, zero, and " "negative ranges[/url]" msgstr "" "Devuelve una interpolación cúbica de Hermite suave entre [code]0[/code] y " "[code]1[/code].\n" "Para rangos positivos (cuando [code]from <= to[/code]) el valor de retorno es " "[code]0[/code] cuando [code]x <= from[/code], y [code]1[/code] cuando [code]x " ">= to[/code]. Si [param x] se encuentra entre [param from] y [param to], el " "valor devuelto sigue una curva en forma de S que realiza una transición suave " "de [code]0[/code] a [code]1[/code].\n" "Para rangos negativos (cuando [code]from > to[/code]) la función se refleja y " "devuelve [code]1[/code] cuando [code]x <= to[/code] y [code]0[/code] cuando " "[code]x >= from[/code].\n" "Esta curva en forma de S es el interpolador cúbico de Hermite, dado por " "[code]f(y) = 3*y^2 - 2*y^3[/code] donde [code]y = (x-from) / (to-from)[/" "code].\n" "[codeblock]\n" "smoothstep(0, 2, -5.0) # Devuelve 0.0\n" "smoothstep(0, 2, 0.5) # Devuelve 0.15625\n" "smoothstep(0, 2, 1.0) # Devuelve 0.5\n" "smoothstep(0, 2, 2.0) # Devuelve 1.0\n" "[/codeblock]\n" "Comparado con [method ease] con un valor de curva de [code]-1.6521[/code], " "[method smoothstep] devuelve la curva más suave posible sin cambios " "repentinos en la derivada. Si necesitas realizar transiciones más avanzadas, " "usa [Tween] o [AnimationPlayer].\n" "[url=https://raw.githubusercontent.com/godotengine/godot-docs/master/img/" "smoothstep_ease_comparison.png]Comparación entre los valores de retorno de " "smoothstep() y ease(x, -1.6521)[/url]\n" "[url=https://raw.githubusercontent.com/godotengine/godot-docs/master/img/" "smoothstep_range.webp]Valores de retorno de Smoothstep() con rangos " "positivos, cero y negativos[/url]" msgid "" "Returns the multiple of [param step] that is the closest to [param x]. This " "can also be used to round a floating-point number to an arbitrary number of " "decimals.\n" "The returned value is the same type of [Variant] as [param step]. Supported " "types: [int], [float], [Vector2], [Vector2i], [Vector3], [Vector3i], " "[Vector4], [Vector4i].\n" "[codeblock]\n" "snapped(100, 32) # Returns 96\n" "snapped(3.14159, 0.01) # Returns 3.14\n" "\n" "snapped(Vector2(34, 70), Vector2(8, 8)) # Returns (32, 72)\n" "[/codeblock]\n" "See also [method ceil], [method floor], and [method round].\n" "[b]Note:[/b] For better type safety, use [method snappedf], [method " "snappedi], [method Vector2.snapped], [method Vector2i.snapped], [method " "Vector3.snapped], [method Vector3i.snapped], [method Vector4.snapped], or " "[method Vector4i.snapped]." msgstr "" "Devuelve el múltiplo de [param step] que está más cerca de [param x]. Esto " "también se puede usar para redondear un número de punto flotante a un número " "arbitrario de decimales.\n" "El valor devuelto es del mismo tipo de [Variant] que [param step]. Tipos " "compatibles: [int], [float], [Vector2], [Vector2i], [Vector3], [Vector3i], " "[Vector4], [Vector4i].\n" "[codeblock]\n" "snapped(100, 32) # Devuelve 96\n" "snapped(3.14159, 0.01) # Devuelve 3.14\n" "\n" "snapped(Vector2(34, 70), Vector2(8, 8)) # Devuelve (32, 72)\n" "[/codeblock]\n" "Véase también [method ceil], [method floor] y [method round].\n" "[b]Nota:[/b] Para una mejor seguridad de tipos, usa [method snappedf], " "[method snappedi], [method Vector2.snapped], [method Vector2i.snapped], " "[method Vector3.snapped], [method Vector3i.snapped], [method Vector4.snapped] " "o [method Vector4i.snapped]." msgid "" "Returns the multiple of [param step] that is the closest to [param x]. This " "can also be used to round a floating-point number to an arbitrary number of " "decimals.\n" "A type-safe version of [method snapped], returning a [float].\n" "[codeblock]\n" "snappedf(32.0, 2.5) # Returns 32.5\n" "snappedf(3.14159, 0.01) # Returns 3.14\n" "[/codeblock]" msgstr "" "Devuelve el múltiplo de [param step] que está más cerca de [param x]. Esto " "también se puede usar para redondear un número de punto flotante a un número " "arbitrario de decimales.\n" "Una versión con seguridad de tipos de [method snapped], que devuelve un " "[float].\n" "[codeblock]\n" "snappedf(32.0, 2.5) # Devuelve 32.5\n" "snappedf(3.14159, 0.01) # Devuelve 3.14\n" "[/codeblock]" msgid "" "Returns the multiple of [param step] that is the closest to [param x].\n" "A type-safe version of [method snapped], returning an [int].\n" "[codeblock]\n" "snappedi(53, 16) # Returns 48\n" "snappedi(4096, 100) # Returns 4100\n" "[/codeblock]" msgstr "" "Devuelve el múltiplo de [param step] que está más cerca de [param x].\n" "Una versión con seguridad de tipos de [method snapped], que devuelve un " "[int].\n" "[codeblock]\n" "snappedi(53, 16) # Devuelve 48\n" "snappedi(4096, 100) # Devuelve 4100\n" "[/codeblock]" msgid "" "Returns the square root of [param x], where [param x] is a non-negative " "number.\n" "[codeblock]\n" "sqrt(9) # Returns 3\n" "sqrt(10.24) # Returns 3.2\n" "sqrt(-1) # Returns NaN\n" "[/codeblock]\n" "[b]Note:[/b] Negative values of [param x] return NaN (\"Not a Number\"). In " "C#, if you need negative inputs, use [code]System.Numerics.Complex[/code]." msgstr "" "Devuelve la raíz cuadrada de [param x], donde [param x] es un número no " "negativo.\n" "[codeblock]\n" "sqrt(9) # Devuelve 3\n" "sqrt(10.24) # Devuelve 3.2\n" "sqrt(-1) # Devuelve NaN\n" "[/codeblock]\n" "[b]Nota:[/b] Los valores negativos de [param x] devuelven NaN (\"Not a " "Number\", No es un número). En C#, si necesitas entradas negativas, usa " "[code]System.Numerics.Complex[/code]." msgid "" "Returns the position of the first non-zero digit, after the decimal point. " "Note that the maximum return value is 10, which is a design decision in the " "implementation.\n" "[codeblock]\n" "var n = step_decimals(5) # n is 0\n" "n = step_decimals(1.0005) # n is 4\n" "n = step_decimals(0.000000005) # n is 9\n" "[/codeblock]" msgstr "" "Devuelve la posición del primer dígito distinto de cero después de la coma " "decimal. Ten en cuenta que el valor de retorno máximo es 10, lo cual es una " "decisión de diseño en la implementación.\n" "[codeblock]\n" "var n = step_decimals(5) # n es 0\n" "n = step_decimals(1.0005) # n es 4\n" "n = step_decimals(0.000000005) # n es 9\n" "[/codeblock]" msgid "" "Converts one or more arguments of any [Variant] type to a [String] in the " "best way possible.\n" "[codeblock]\n" "var a = [10, 20, 30]\n" "var b = str(a)\n" "print(len(a)) # Prints 3 (the number of elements in the array).\n" "print(len(b)) # Prints 12 (the length of the string \"[10, 20, 30]\").\n" "[/codeblock]" msgstr "" "Convierte uno o más argumentos de cualquier tipo [Variant] a un [String] de " "la mejor manera posible.\n" "[codeblock]\n" "var a = [10, 20, 30]\n" "var b = str(a)\n" "print(len(a)) # Imprime 3 (el número de elementos en el array).\n" "print(len(b)) # Imprime 12 (la longitud de la string \"[10, 20, 30]\").\n" "[/codeblock]" msgid "" "Converts a formatted [param string] that was returned by [method var_to_str] " "to the original [Variant].\n" "[codeblocks]\n" "[gdscript]\n" "var data = '{ \"a\": 1, \"b\": 2 }' # data is a String\n" "var dict = str_to_var(data) # dict is a Dictionary\n" "print(dict[\"a\"]) # Prints 1\n" "[/gdscript]\n" "[csharp]\n" "string data = \"{ \\\"a\\\": 1, \\\"b\\\": 2 }\"; // data is a " "string\n" "var dict = GD.StrToVar(data).AsGodotDictionary(); // dict is a Dictionary\n" "GD.Print(dict[\"a\"]); // Prints 1\n" "[/csharp]\n" "[/codeblocks]" msgstr "" "Convierte una [param string] formateada que fue devuelta por [method " "var_to_str] al [Variant] original.\n" "[codeblocks]\n" "[gdscript]\n" "var data = '{ \"a\": 1, \"b\": 2 }' # data es un String\n" "var dict = str_to_var(data) # dict es un Dictionary\n" "print(dict[\"a\"]) # Imprime 1\n" "[/gdscript]\n" "[csharp]\n" "string data = \"{ \\\"a\\\": 1, \\\"b\\\": 2 }\"; // data es una " "string\n" "var dict = GD.StrToVar(data).AsGodotDictionary(); // dict es un Dictionary\n" "GD.Print(dict[\"a\"]); // Imprime 1\n" "[/csharp]\n" "[/codeblocks]" msgid "" "Returns the tangent of angle [param angle_rad] in radians.\n" "[codeblock]\n" "tan(deg_to_rad(45)) # Returns 1\n" "[/codeblock]" msgstr "" "Devuelve la tangente del ángulo [param angle_rad] en radianes.\n" "[codeblock]\n" "tan(deg2rad(45)) # Devuelve 1\n" "[/codeblock]" msgid "" "Returns the hyperbolic tangent of [param x].\n" "[codeblock]\n" "var a = log(2.0) # Returns 0.693147\n" "tanh(a) # Returns 0.6\n" "[/codeblock]" msgstr "" "Devuelve la tangente hiperbólica de [param x].\n" "[codeblock]\n" "var a = log(2.0) # Devuelve 0.693147\n" "tanh(a) # Devuelve 0.6\n" "[/codeblock]" msgid "" "Converts the given [param variant] to the given [param type], using the [enum " "Variant.Type] values. This method is generous with how it handles types, it " "can automatically convert between array types, convert numeric [String]s to " "[int], and converting most things to [String].\n" "If the type conversion cannot be done, this method will return the default " "value for that type, for example converting [Rect2] to [Vector2] will always " "return [constant Vector2.ZERO]. This method will never show error messages as " "long as [param type] is a valid Variant type.\n" "The returned value is a [Variant], but the data inside and its type will be " "the same as the requested type.\n" "[codeblock]\n" "type_convert(\"Hi!\", TYPE_INT) # Returns 0\n" "type_convert(\"123\", TYPE_INT) # Returns 123\n" "type_convert(123.4, TYPE_INT) # Returns 123\n" "type_convert(5, TYPE_VECTOR2) # Returns (0, 0)\n" "type_convert(\"Hi!\", TYPE_NIL) # Returns null\n" "[/codeblock]" msgstr "" "Convierte un [param variant] dado a [param type], usando los valores de [enum " "Variant.Type]. Este método es amigable con como maneja los tipos, puede " "convertir automáticamente entre tipos de array, convertir [String]s numéricos " "a [int] y convertir la gran mayoría de cosas a [String].\n" "Si no se puede pasar de un tipo a otro, este método devolverá el valor por " "defecto de ese tipo, por ejemplo, convertir un [Rect2] a [Vector2] siempre " "devolverá [constant Vector2.ZERO]. Este método no muestra mensajes de error " "siempre que [param type] sea un tipo valido.\n" "El valor devuelto es [Variant], pero su tipo y datos serán iguales que el que " "se pidió.\n" "[codeblock]\n" "type_convert(\"Hi!\", TYPE_INT) # Devuelve 0\n" "type_convert(\"123\", TYPE_INT) # Devuelve 123\n" "type_convert(123.4, TYPE_INT) # Devuelve 123\n" "type_convert(5, TYPE_VECTOR2) # Devuelve (0, 0)\n" "type_convert(\"Hi!\", TYPE_NIL) # Devuelve null\n" "[/codeblock]" msgid "" "Returns a human-readable name of the given [param type], using the [enum " "Variant.Type] values.\n" "[codeblock]\n" "print(TYPE_INT) # Prints 2\n" "print(type_string(TYPE_INT)) # Prints \"int\"\n" "print(type_string(TYPE_STRING)) # Prints \"String\"\n" "[/codeblock]\n" "See also [method typeof]." msgstr "" "Devuelve un nombre legible para el [param type] dado, utilizando los valores " "de [enum Variant.Type].\n" "[codeblock]\n" "print(TYPE_INT) # Imprime 2\n" "print(type_string(TYPE_INT)) # Imprime \"int\"\n" "print(type_string(TYPE_STRING)) # Imprime \"String\"\n" "[/codeblock]\n" "Véase también [method typeof]." msgid "" "Returns the internal type of the given [param variable], using the [enum " "Variant.Type] values.\n" "[codeblock]\n" "var json = JSON.new()\n" "json.parse('[\"a\", \"b\", \"c\"]')\n" "var result = json.get_data()\n" "if typeof(result) == TYPE_ARRAY:\n" "\tprint(result[0]) # Prints \"a\"\n" "else:\n" "\tprint(\"Unexpected result!\")\n" "[/codeblock]\n" "See also [method type_string]." msgstr "" "Devuelve el tipo interno del [param variable] dado, usando los valores de " "[enum Variant.Type].\n" "[codeblock]\n" "var json = JSON.new()\n" "json.parse('[\"a\", \"b\", \"c\"]')\n" "var result = json.get_data()\n" "if typeof(result) == TYPE_ARRAY:\n" "\tprint(result[0]) # Imprime \"a\"\n" "else:\n" "\tprint(\"¡Resultado inesperado!\")\n" "[/codeblock]\n" "Véase también [method type_string]." msgid "" "Encodes a [Variant] value to a byte array, without encoding objects. " "Deserialization can be done with [method bytes_to_var].\n" "[b]Note:[/b] If you need object serialization, see [method " "var_to_bytes_with_objects].\n" "[b]Note:[/b] Encoding [Callable] is not supported and will result in an empty " "value, regardless of the data." msgstr "" "Cifra el valor de [Variant] a un array de bytes (byte array) sin encodificar " "el objeto en si. La deserialización puede ser hecha con [method " "bytes_to_var].\n" "[b]Nota:[/b] Si necesitas serializar el objeto, véase [method " "var_to_bytes_with_objects].\n" "[b]Nota:[/b] La encodificación de [Callable] no esta soportada y siempre " "devolverá un valor vacío, sin importar los datos." msgid "" "Encodes a [Variant] value to a byte array. Encoding objects is allowed (and " "can potentially include executable code). Deserialization can be done with " "[method bytes_to_var_with_objects].\n" "[b]Note:[/b] Encoding [Callable] is not supported and will result in an empty " "value, regardless of the data." msgstr "" "Codifica un valor [Variant] en un array de bytes. Se permite codificar " "objetos (y potencialmente puede incluir código ejecutable). La " "deserialización puede realizarse con [method bytes_to_var_with_objects].\n" "[b]Nota:[/b] La codificación de [Callable] no es compatible y dará como " "resultado un valor vacío, independientemente de los datos." msgid "" "Converts a [Variant] [param variable] to a formatted [String] that can then " "be parsed using [method str_to_var].\n" "[codeblocks]\n" "[gdscript]\n" "var a = { \"a\": 1, \"b\": 2 }\n" "print(var_to_str(a))\n" "[/gdscript]\n" "[csharp]\n" "var a = new Godot.Collections.Dictionary { [\"a\"] = 1, [\"b\"] = 2 };\n" "GD.Print(GD.VarToStr(a));\n" "[/csharp]\n" "[/codeblocks]\n" "Prints:\n" "[codeblock lang=text]\n" "{\n" "\t\"a\": 1,\n" "\t\"b\": 2\n" "}\n" "[/codeblock]\n" "[b]Note:[/b] Converting [Signal] or [Callable] is not supported and will " "result in an empty value for these types, regardless of their data." msgstr "" "Convierte una [Variant] [param variable] en una [String] formateada que luego " "puede ser analizada utilizando [method str_to_var].\n" "[codeblocks]\n" "[gdscript]\n" "var a = { \"a\": 1, \"b\": 2 }\n" "print(var_to_str(a))\n" "[/gdscript]\n" "[csharp]\n" "var a = new Godot.Collections.Dictionary { [\"a\"] = 1, [\"b\"] = 2 };\n" "GD.Print(GD.VarToStr(a));\n" "[/csharp]\n" "[/codeblocks]\n" "Imprime:\n" "[codeblock lang=text]\n" "{\n" "\t\"a\": 1,\n" "\t\"b\": 2\n" "}\n" "[/codeblock]\n" "[b]Nota:[/b] La conversión de [Signal] o [Callable] no es compatible y " "resultará en un valor vacío para estos tipos, independientemente de sus datos." msgid "" "Returns a [WeakRef] instance holding a weak reference to [param obj]. Returns " "an empty [WeakRef] instance if [param obj] is [code]null[/code]. Prints an " "error and returns [code]null[/code] if [param obj] is neither [Object]-" "derived nor [code]null[/code].\n" "A weak reference to an object is not enough to keep the object alive: when " "the only remaining references to a referent are weak references, garbage " "collection is free to destroy the referent and reuse its memory for something " "else. However, until the object is actually destroyed the weak reference may " "return the object even if there are no strong references to it." msgstr "" "Devuelve una instancia [WeakRef] que contiene una referencia débil a [param " "obj]. Devuelve una instancia [WeakRef] vacía si [param obj] es [code]null[/" "code]. Imprime un error y devuelve [code]null[/code] si [param obj] no es " "derivado de [Object] ni [code]null[/code].\n" "Una referencia débil a un objeto no es suficiente para mantenerlo activo: " "cuando las únicas referencias restantes a un referente son débiles, la " "recolección de elementos no utilizados puede destruir el referente y " "reutilizar su memoria para otra cosa. Sin embargo, hasta que el objeto se " "destruya, la referencia débil puede devolverlo incluso si no existen " "referencias fuertes a él." msgid "" "Wraps the [Variant] [param value] between [param min] and [param max]. [param " "min] is [i]inclusive[/i] while [param max] is [i]exclusive[/i]. This can be " "used for creating loop-like behavior or infinite surfaces.\n" "Variant types [int] and [float] are supported. If any of the arguments is " "[float], this function returns a [float], otherwise it returns an [int].\n" "[codeblock]\n" "var a = wrap(4, 5, 10)\n" "# a is 9 (int)\n" "\n" "var a = wrap(7, 5, 10)\n" "# a is 7 (int)\n" "\n" "var a = wrap(10.5, 5, 10)\n" "# a is 5.5 (float)\n" "[/codeblock]" msgstr "" "Envuelve el [Variant] [param value] entre [param min] y [param max]. [param " "min] es [i]inclusivo[/i] mientras que [param max] es [i]exclusivo[/i]. Esto " "puede utilizarse para crear comportamientos similares a bucles o superficies " "infinitas.\n" "Los tipos de [Variant] compatibles son [int] y [float]. Si alguno de los " "argumentos es [float], esta función devuelve un [float], de lo contrario " "devuelve un [int].\n" "[codeblock]\n" "var a = wrap(4, 5, 10)\n" "# a es 9 (int)\n" "\n" "var a = wrap(7, 5, 10)\n" "# a es 7 (int)\n" "\n" "var a = wrap(10.5, 5, 10)\n" "# a es 5.5 (float)\n" "[/codeblock]" msgid "" "Wraps the float [param value] between [param min] and [param max]. [param " "min] is [i]inclusive[/i] while [param max] is [i]exclusive[/i]. This can be " "used for creating loop-like behavior or infinite surfaces.\n" "[codeblock]\n" "# Infinite loop between 5.0 and 9.9\n" "value = wrapf(value + 0.1, 5.0, 10.0)\n" "[/codeblock]\n" "[codeblock]\n" "# Infinite rotation (in radians)\n" "angle = wrapf(angle + 0.1, 0.0, TAU)\n" "[/codeblock]\n" "[codeblock]\n" "# Infinite rotation (in radians)\n" "angle = wrapf(angle + 0.1, -PI, PI)\n" "[/codeblock]\n" "[b]Note:[/b] If [param min] is [code]0[/code], this is equivalent to [method " "fposmod], so prefer using that instead. [method wrapf] is more flexible than " "using the [method fposmod] approach by giving the user control over the " "minimum value." msgstr "" "Ajusta el valor flotante [param value] entre [param min] y [param max]. " "[param min] es [i]inclusivo[/i] mientras que [param max] es [i]exclusivo[/i]. " "Esto puede ser usado para crear un comportamiento similar a un bucle o " "superficies infinitas.\n" "[codeblock]\n" "# Bucle infinito entre 5.0 y 9.9\n" "valor = wrapf(valor + 0.1, 5.0, 10.0)\n" "[/codeblock]\n" "[codeblock]\n" "# Rotación infinita (en radianes)\n" "ángulo = wrapf(ángulo + 0.1, 0.0, TAU)\n" "[/codeblock]\n" "[codeblock]\n" "# Rotación infinita (en radianes)\n" "ángulo = wrapf(ángulo + 0.1, -PI, PI)\n" "[/codeblock]\n" "[b]Nota:[/b] Si [param min] es [code]0[/code], esto es equivalente a [method " "fposmod], así que es preferible usar ese en su lugar. [method wrapf] es más " "flexible que usar [method fposmod], ya que le da al usuario control sobre el " "valor mínimo." msgid "" "Wraps the integer [param value] between [param min] and [param max]. [param " "min] is [i]inclusive[/i] while [param max] is [i]exclusive[/i]. This can be " "used for creating loop-like behavior or infinite surfaces.\n" "[codeblock]\n" "# Infinite loop between 5 and 9\n" "frame = wrapi(frame + 1, 5, 10)\n" "[/codeblock]\n" "[codeblock]\n" "# result is -2\n" "var result = wrapi(-6, -5, -1)\n" "[/codeblock]" msgstr "" "Ajusta el entero [param value] entre [param min] y [param max]. [param min] " "es [i]inclusivo[/i] mientras que [param max] es [i]exclusivo[/i]. Esto puede " "usarse para crear un comportamiento similar a un bucle o superficies " "infinitas.\n" "[codeblock]\n" "# Bucle infinito entre 5 y 9\n" "fotograma = wrapi(fotograma + 1, 5, 10)\n" "[/codeblock]\n" "[codeblock]\n" "# El resultado es -2\n" "var resultado = wrapi(-6, -5, -1)\n" "[/codeblock]" msgid "The [AccessibilityServer] singleton." msgstr "El singleton [AccessibilityServer]." msgid "The [AudioServer] singleton." msgstr "El singleton [AudioServer]." msgid "The [CameraServer] singleton." msgstr "El singleton [CameraServer]." msgid "The [ClassDB] singleton." msgstr "El singleton [ClassDB]." msgid "The [DisplayServer] singleton." msgstr "El singleton [DisplayServer]." msgid "" "The [EditorInterface] singleton.\n" "[b]Note:[/b] Only available in editor builds." msgstr "" "El singleton [EditorInterface].\n" "[b]Nota:[/b] Solo disponible en compilaciones del editor." msgid "The [Engine] singleton." msgstr "El singleton [Engine]." msgid "The [EngineDebugger] singleton." msgstr "El singleton [EngineDebugger]." msgid "The [GDExtensionManager] singleton." msgstr "El singleton [GDExtensionManager]." msgid "The [Geometry2D] singleton." msgstr "El singleton [Geometry2D]." msgid "The [Geometry3D] singleton." msgstr "El singleton [Geometry3D]." msgid "The [IP] singleton." msgstr "El singleton [IP]." msgid "The [Input] singleton." msgstr "El singleton [Input]." msgid "The [InputMap] singleton." msgstr "El singleton [InputMap]." msgid "" "The [JavaClassWrapper] singleton.\n" "[b]Note:[/b] Only implemented on Android." msgstr "" "El singleton [JavaClassWrapper] .\n" "[b]Nota:[/b] Solo implementado en Android." msgid "" "The [JavaScriptBridge] singleton.\n" "[b]Note:[/b] Only implemented on the Web platform." msgstr "" "El singleton [JavaScriptBridge].\n" "[b]Nota:[/b] Solo se implementa en la plataforma web." msgid "The [Marshalls] singleton." msgstr "El singleton [Marshalls]." msgid "" "The [NativeMenu] singleton.\n" "[b]Note:[/b] Only implemented on macOS." msgstr "" "El singleton [NativeMenu].\n" "[b]Nota:[/b] Solo implementado en macOS." msgid "The [NavigationMeshGenerator] singleton." msgstr "El singleton [NavigationMeshGenerator]." msgid "The [NavigationServer2D] singleton." msgstr "El singleton [NavigationServer2D]." msgid "The [NavigationServer2DManager] singleton." msgstr "El singleton [NavigationServer2DManager]." msgid "The [NavigationServer3D] singleton." msgstr "El singleton [NavigationServer3D]." msgid "The [NavigationServer3DManager] singleton." msgstr "El singleton [NavigationServer3DManager]." msgid "The [OS] singleton." msgstr "El singleton [OS]." msgid "The [Performance] singleton." msgstr "El singleton [Performance]." msgid "The [PhysicsServer2D] singleton." msgstr "El singleton [PhysicsServer2D]." msgid "The [PhysicsServer2DManager] singleton." msgstr "El singleton [PhysicsServer2DManager]." msgid "The [PhysicsServer3D] singleton." msgstr "El singleton [PhysicsServer3D]." msgid "The [PhysicsServer3DManager] singleton." msgstr "El singleton [PhysicsServer3DManager]." msgid "The [ProjectSettings] singleton." msgstr "El singleton [ProjectSettings]." msgid "The [RenderingServer] singleton." msgstr "El singleton [RenderingServer]." msgid "The [ResourceLoader] singleton." msgstr "El singleton [ResourceLoader]." msgid "The [ResourceSaver] singleton." msgstr "El singleton [ResourceSaver]." msgid "The [ResourceUID] singleton." msgstr "El singleton [ResourceUID]." msgid "The [TextServerManager] singleton." msgstr "El singleton [TextServerManager]." msgid "The [ThemeDB] singleton." msgstr "El singleton [ThemeDB]." msgid "The [Time] singleton." msgstr "El singleton [Time]." msgid "The [TranslationServer] singleton." msgstr "El singleton [TranslationServer]." msgid "The [WorkerThreadPool] singleton." msgstr "El singleton [WorkerThreadPool]." msgid "The [XRServer] singleton." msgstr "El singleton [XRServer]." msgid "Left side, usually used for [Control] or [StyleBox]-derived classes." msgstr "" "Lado izquierdo, generalmente utilizado para clases derivadas de [Control] o " "[StyleBox]." msgid "Top side, usually used for [Control] or [StyleBox]-derived classes." msgstr "" "Lado superior, generalmente utilizado para clases derivadas de [Control] o " "[StyleBox]." msgid "Right side, usually used for [Control] or [StyleBox]-derived classes." msgstr "" "Lado derecho, generalmente utilizado para clases derivadas de [Control] o " "[StyleBox]." msgid "Bottom side, usually used for [Control] or [StyleBox]-derived classes." msgstr "" "Lado inferior, generalmente utilizado para clases derivadas de [Control] o " "[StyleBox]." msgid "Top-left corner." msgstr "Esquina Superior Izquierda." msgid "Top-right corner." msgstr "Esquina Superior Derecha." msgid "Bottom-right corner." msgstr "Esquina Inferior Derecha." msgid "Bottom-left corner." msgstr "Esquina Inferior Izquierda." msgid "" "General vertical alignment, usually used for [Separator], [ScrollBar], " "[Slider], etc." msgstr "" "Alineación vertical general, generalmente usada para [Separator], " "[ScrollBar], [Slider], etc." msgid "" "General horizontal alignment, usually used for [Separator], [ScrollBar], " "[Slider], etc." msgstr "" "Alineación horizontal general, generalmente usada para [Separator], " "[ScrollBar], [Slider], etc." msgid "" "Clockwise rotation. Used by some methods (e.g. [method Image.rotate_90])." msgstr "" "Rotación en el sentido de las agujas del reloj. Utilizado por algunos métodos " "(p.ej., [method Image.rotate_90])." msgid "" "Counter-clockwise rotation. Used by some methods (e.g. [method " "Image.rotate_90])." msgstr "" "Rotación en sentido contrario a las agujas del reloj. Utilizado por algunos " "métodos (p.ej. [method Image.rotate_90])." msgid "Horizontal left alignment, usually for text-derived classes." msgstr "Alineación horizontal izquierda, generalmente para clases de texto." msgid "Horizontal center alignment, usually for text-derived classes." msgstr "Alineación central horizontal, generalmente para clases de texto." msgid "Horizontal right alignment, usually for text-derived classes." msgstr "Alineación horizontal derecha, generalmente para clases de texto." msgid "Expand row to fit width, usually for text-derived classes." msgstr "" "Expandir fila para ajustar el ancho, generalmente para clases derivadas de " "texto." msgid "Vertical top alignment, usually for text-derived classes." msgstr "Alineación vertical superior, generalmente para clases de texto." msgid "Vertical center alignment, usually for text-derived classes." msgstr "" "Alineación central vertical, normalmente para clases de texto.Alineacion " "central vertical, generalmente usada para clases derivadas de texto." msgid "Vertical bottom alignment, usually for text-derived classes." msgstr "Alineación vertical inferior, generalmente para clases de texto." msgid "Expand rows to fit height, usually for text-derived classes." msgstr "" "Expandir filas para ajustar la altura, generalmente para clases derivadas de " "texto." msgid "" "Aligns the top of the inline object (e.g. image, table) to the position of " "the text specified by [code]INLINE_ALIGNMENT_TO_*[/code] constant." msgstr "" "Alinea la parte superior del objeto en línea (por ejemplo, imagen, tabla) a " "la posición del texto especificada por la constante " "[code]INLINE_ALIGNMENT_TO_*[/code]." msgid "" "Aligns the center of the inline object (e.g. image, table) to the position of " "the text specified by [code]INLINE_ALIGNMENT_TO_*[/code] constant." msgstr "" "Alinea la parte superior del objeto en línea (por ejemplo, imagen, tabla) a " "la posición del texto especificada por la constante " "[code]INLINE_ALIGNMENT_TO_*[/code]." msgid "" "Aligns the baseline (user defined) of the inline object (e.g. image, table) " "to the position of the text specified by [code]INLINE_ALIGNMENT_TO_*[/code] " "constant." msgstr "" "Alinea la línea base (definida por el usuario) del objeto en línea (por " "ejemplo, imagen, tabla) con la posición del texto especificado por la " "constante [code]INLINE_ALIGNMENT_TO_*[/code]." msgid "" "Aligns the bottom of the inline object (e.g. image, table) to the position of " "the text specified by [code]INLINE_ALIGNMENT_TO_*[/code] constant." msgstr "" "Alinea la parte inferior del objeto en línea (por ejemplo, imagen, tabla) con " "la posición del texto especificado por la constante " "[code]INLINE_ALIGNMENT_TO_*[/code]." msgid "" "Aligns the position of the inline object (e.g. image, table) specified by " "[code]INLINE_ALIGNMENT_*_TO[/code] constant to the top of the text." msgstr "" "Alinea la posición del objeto en línea (por ejemplo, imagen, tabla) " "especificado por la constante [code]INLINE_ALIGNMENT_*_TO[/code] en la parte " "superior del texto." msgid "" "Aligns the position of the inline object (e.g. image, table) specified by " "[code]INLINE_ALIGNMENT_*_TO[/code] constant to the center of the text." msgstr "" "Alinea la posición del objeto en línea (por ejemplo, imagen, tabla) " "especificado por la constante [code]INLINE_ALIGNMENT_*_TO[/code] al centro " "del texto." msgid "" "Aligns the position of the inline object (e.g. image, table) specified by " "[code]INLINE_ALIGNMENT_*_TO[/code] constant to the baseline of the text." msgstr "" "Alinea la posición del objeto en línea (por ejemplo, imagen, tabla) " "especificado por la constante [code]INLINE_ALIGNMENT_*_TO[/code] con la línea " "base del texto." msgid "Aligns inline object (e.g. image, table) to the bottom of the text." msgstr "" "Alinea el objeto en línea (por ejemplo, imagen, tabla) en la parte inferior " "del texto." msgid "" "Aligns top of the inline object (e.g. image, table) to the top of the text. " "Equivalent to [code]INLINE_ALIGNMENT_TOP_TO | INLINE_ALIGNMENT_TO_TOP[/code]." msgstr "" "Alinea la parte superior del objeto en línea (p. ej., imagen, tabla) con la " "parte superior del texto. Equivalente a [code]INLINE_ALIGNMENT_TOP_TO | " "INLINE_ALIGNMENT_TO_TOP[/code]." msgid "" "Aligns center of the inline object (e.g. image, table) to the center of the " "text. Equivalent to [code]INLINE_ALIGNMENT_CENTER_TO | " "INLINE_ALIGNMENT_TO_CENTER[/code]." msgstr "" "Alinea el centro del objeto en línea (p. ej., imagen, tabla) con el centro " "del texto. Equivalente a [code]INLINE_ALIGNMENT_CENTER_TO | " "INLINE_ALIGNMENT_TO_CENTER[/code]." msgid "" "Aligns bottom of the inline object (e.g. image, table) to the bottom of the " "text. Equivalent to [code]INLINE_ALIGNMENT_BOTTOM_TO | " "INLINE_ALIGNMENT_TO_BOTTOM[/code]." msgstr "" "Alinea la parte inferior del objeto en línea (p. ej., imagen, tabla) con la " "parte inferior del texto. Equivalente a [code]INLINE_ALIGNMENT_BOTTOM_TO | " "INLINE_ALIGNMENT_TO_BOTTOM[/code]." msgid "A bit mask for [code]INLINE_ALIGNMENT_*_TO[/code] alignment constants." msgstr "" "Una máscara de bits para las constantes de alineación de " "[code]INLINE_ALIGNMENT_*_TO[/code]." msgid "A bit mask for [code]INLINE_ALIGNMENT_TO_*[/code] alignment constants." msgstr "" "Una máscara de bits para las constantes de alineación de " "[code]INLINE_ALIGNMENT_TO_*[/code]." msgid "" "Enum value which doesn't correspond to any key. This is used to initialize " "[enum Key] properties with a generic state." msgstr "" "Valor de enum que no corresponde a ninguna clave. Se utiliza para inicializar " "las propiedades [enum Key] con un estado genérico." msgid "Keycodes with this bit applied are non-printable." msgstr "Los códigos clave con este bit aplicado no son imprimibles." msgid "Escape key." msgstr "Tecla Escape." msgid "Tab key." msgstr "Tecla Tabulador." msgid "Shift + Tab key." msgstr "Tecla Shift + Tab." msgid "Backspace key." msgstr "Tecla Retroceso." msgid "Return key (on the main keyboard)." msgstr "Devuelve la tecla (en el teclado principal)." msgid "Enter key on the numeric keypad." msgstr "Pulsa la tecla en el teclado numerico." msgid "Insert key." msgstr "Tecla Insertar." msgid "Delete key." msgstr "Tecla Suprimir." msgid "Pause key." msgstr "Tecla Pausa." msgid "Print Screen key." msgstr "Tecla Imprimir Pantalla." msgid "System Request key." msgstr "Tecla Peticion de Sistema." msgid "Clear key." msgstr "Tecla Clear." msgid "Home key." msgstr "Tecla Inicio." msgid "End key." msgstr "Tecla Fin." msgid "Left arrow key." msgstr "Tecla Flecha Izquierda." msgid "Up arrow key." msgstr "Tecla Flecha Arriba." msgid "Right arrow key." msgstr "Tecla flecha derecha." msgid "Down arrow key." msgstr "Tecla Flecha abajo." msgid "Page Up key." msgstr "Tecla RePag." msgid "Page Down key." msgstr "Tecla AvPag." msgid "Shift key." msgstr "Tecla Shift." msgid "Control key." msgstr "Tecla Control." msgid "Meta key." msgstr "Tecla Meta." msgid "Alt key." msgstr "Tecla Alt." msgid "Caps Lock key." msgstr "Tecla Bloque Mayusculas." msgid "Num Lock key." msgstr "Tecla Bloque numerico." msgid "Scroll Lock key." msgstr "Tecla Bloqueo Scroll." msgid "F1 key." msgstr "Tecla F1." msgid "F2 key." msgstr "Tecla F2." msgid "F3 key." msgstr "Tecla F3." msgid "F4 key." msgstr "Tecla F4." msgid "F5 key." msgstr "Tecla F5." msgid "F6 key." msgstr "Tecla F6." msgid "F7 key." msgstr "Tecla F7." msgid "F8 key." msgstr "Tecla F8." msgid "F9 key." msgstr "Tecla F9." msgid "F10 key." msgstr "Tecla F10." msgid "F11 key." msgstr "Tecla F11." msgid "F12 key." msgstr "Tecla F12." msgid "F13 key." msgstr "Tecla F13." msgid "F14 key." msgstr "Tecla F14." msgid "F15 key." msgstr "Tecla F15." msgid "F16 key." msgstr "Tecla F16." msgid "F17 key." msgstr "Tecla F17." msgid "F18 key." msgstr "Tecla F18." msgid "F19 key." msgstr "Tecla F19." msgid "F20 key." msgstr "Tecla F20." msgid "F21 key." msgstr "Tecla F21." msgid "F22 key." msgstr "Tecla F22." msgid "F23 key." msgstr "Tecla F23." msgid "F24 key." msgstr "Tecla F24." msgid "F25 key. Only supported on macOS and Linux due to a Windows limitation." msgstr "" "Tecla F25. Solo soportada en macOS y Linux por las limitaciones de Windows." msgid "F26 key. Only supported on macOS and Linux due to a Windows limitation." msgstr "" "Tecla F26. Solo soportada en macOS y Linux por las limitaciones de Windows." msgid "F27 key. Only supported on macOS and Linux due to a Windows limitation." msgstr "" "Tecla F27. Solo soportada en macOS y Linux por las limitaciones de Windows." msgid "F28 key. Only supported on macOS and Linux due to a Windows limitation." msgstr "" "Tecla F28. Solo soportada en macOS y Linux por las limitaciones de Windows." msgid "F29 key. Only supported on macOS and Linux due to a Windows limitation." msgstr "" "Tecla F29. Solo soportada en macOS y Linux por las limitaciones de Windows." msgid "F30 key. Only supported on macOS and Linux due to a Windows limitation." msgstr "" "Tecla F30. Solo soportada en macOS y Linux por las limitaciones de Windows." msgid "F31 key. Only supported on macOS and Linux due to a Windows limitation." msgstr "" "Tecla F31. Solo soportada en macOS y Linux por las limitaciones de Windows." msgid "F32 key. Only supported on macOS and Linux due to a Windows limitation." msgstr "" "Tecla F32. Solo soportada en macOS y Linux por las limitaciones de Windows." msgid "F33 key. Only supported on macOS and Linux due to a Windows limitation." msgstr "" "Tecla F33. Solo soportada en macOS y Linux por las limitaciones de Windows." msgid "F34 key. Only supported on macOS and Linux due to a Windows limitation." msgstr "" "Tecla F34. Solo soportada en macOS y Linux por las limitaciones de Windows." msgid "F35 key. Only supported on macOS and Linux due to a Windows limitation." msgstr "" "Tecla F35. Solo soportada en macOS y Linux por las limitaciones de Windows." msgid "Multiply (*) key on the numeric keypad." msgstr "Tecla Multiplicar(*) del teclado numérico." msgid "Divide (/) key on the numeric keypad." msgstr "Tecla Division(/) del teclado numérico." msgid "Subtract (-) key on the numeric keypad." msgstr "Tecla Resta(-) del teclado numérico." msgid "Period (.) key on the numeric keypad." msgstr "Tecla . decimal(.) del teclado numérico." msgid "Add (+) key on the numeric keypad." msgstr "Tecla Suma(+) del teclado numérico." msgid "Number 0 on the numeric keypad." msgstr "Tecla 0 del teclado numérico." msgid "Number 1 on the numeric keypad." msgstr "Tecla 1 del teclado numérico." msgid "Number 2 on the numeric keypad." msgstr "Tecla 2 del teclado numérico." msgid "Number 3 on the numeric keypad." msgstr "Tecla 3 del teclado numérico." msgid "Number 4 on the numeric keypad." msgstr "Tecla 4 del teclado numérico." msgid "Number 5 on the numeric keypad." msgstr "Tecla 5 del teclado numérico." msgid "Number 6 on the numeric keypad." msgstr "Tecla 6 del teclado numérico." msgid "Number 7 on the numeric keypad." msgstr "Tecla 7 del teclado numérico." msgid "Number 8 on the numeric keypad." msgstr "Tecla 8 del teclado numérico." msgid "Number 9 on the numeric keypad." msgstr "Tecla 9 del teclado numérico." msgid "Context menu key." msgstr "Tecla Menu Contexto." msgid "Hyper key. (On Linux/X11 only)." msgstr "Tecla Hyper. (En Linux/X11 solo)." msgid "Help key." msgstr "Tecla Ayuda." msgid "Back key." msgstr "Tecla de Retroceso." msgid "Forward key." msgstr "Tecla de Adelante." msgid "Media stop key." msgstr "Tecla reproduccion parar." msgid "Refresh key." msgstr "Tecla de Recarga." msgid "Volume down key." msgstr "Tecla Bajar Volumen." msgid "Mute volume key." msgstr "Tecla Quitar Volumen." msgid "Volume up key." msgstr "Tecla Subir Volumen." msgid "Media play key." msgstr "Tecla de reproducción multimedia." msgid "Previous song key." msgstr "Tecla de Canción anterior." msgid "Next song key." msgstr "Tecla de Siguiente canción." msgid "Media record key." msgstr "Tecla grabar." msgid "Home page key." msgstr "Tecla Inicio." msgid "Favorites key." msgstr "Tecla Favoritos." msgid "Search key." msgstr "Tecla Buscar." msgid "Standby key." msgstr "Tecla en espera(Standby)." msgid "Open URL / Launch Browser key." msgstr "Tecla Abrir URL/Abrir el navegador." msgid "Launch Mail key." msgstr "Tecla Abrir el Correo." msgid "Launch Media key." msgstr "Tecla lanzar Media." msgid "Launch Shortcut 0 key." msgstr "Tecla Acceso Directo 0." msgid "Launch Shortcut 1 key." msgstr "Tecla Acceso Directo 1." msgid "Launch Shortcut 2 key." msgstr "Tecla Acceso Directo 2." msgid "Launch Shortcut 3 key." msgstr "Tecla Acceso Directo 3." msgid "Launch Shortcut 4 key." msgstr "Tecla Acceso Directo 4." msgid "Launch Shortcut 5 key." msgstr "Tecla Acceso Directo 5." msgid "Launch Shortcut 6 key." msgstr "Tecla Acceso Directo 6." msgid "Launch Shortcut 7 key." msgstr "Tecla Acceso Directo 7." msgid "Launch Shortcut 8 key." msgstr "Tecla Acceso Directo 8." msgid "Launch Shortcut 9 key." msgstr "Tecla Acceso Directo 9." msgid "Launch Shortcut A key." msgstr "Tecla Acceso Directo A." msgid "Launch Shortcut B key." msgstr "Tecla Acceso Directo B." msgid "Launch Shortcut C key." msgstr "Tecla Acceso Directo C." msgid "Launch Shortcut D key." msgstr "Tecla Acceso Directo D." msgid "Launch Shortcut E key." msgstr "Tecla Acceso Directo E." msgid "Launch Shortcut F key." msgstr "Tecla Acceso Directo F." msgid "\"Globe\" key on Mac / iPad keyboard." msgstr "Tecla \"Globo\" en el teclado de Mac / iPad." msgid "\"On-screen keyboard\" key on iPad keyboard." msgstr "Tecla \"Teclado en pantalla\" en el teclado del iPad." msgid "英数 key on Mac keyboard." msgstr "Tecla 英数 en el teclado de Mac." msgid "かな key on Mac keyboard." msgstr "Tecla かな en el teclado de Mac." msgid "Unknown key." msgstr "Tecla desconocida." msgid "Space key." msgstr "Tecla Espaciado." msgid "Exclamation mark ([code]![/code]) key." msgstr "Tecla de signo de exclamación ([code]![/code])." msgid "Double quotation mark ([code]\"[/code]) key." msgstr "Tecla de comillas dobles ([code]\"[/code])." msgid "Number sign or [i]hash[/i] ([code]#[/code]) key." msgstr "Tecla de signo numérico o [i]gato[/i] ([code]#[/code])." msgid "Dollar sign ([code]$[/code]) key." msgstr "Tecla de signo de dólar ([code]$[/code])." msgid "Percent sign ([code]%[/code]) key." msgstr "Tecla de signo de porcentaje ([code]%[/code])." msgid "Ampersand ([code]&[/code]) key." msgstr "Tecla de et ([code]&[/code])." msgid "Apostrophe ([code]'[/code]) key." msgstr "Tecla de apóstrofe ([code]'[/code])." msgid "Left parenthesis ([code]([/code]) key." msgstr "Tecla de paréntesis izquierdo ([code]([/code])." msgid "Right parenthesis ([code])[/code]) key." msgstr "Tecla de paréntesis derecho ([code])[/code])." msgid "Asterisk ([code]*[/code]) key." msgstr "Tecla de asterisco ([code]*[/code])." msgid "Plus ([code]+[/code]) key." msgstr "Tecla de más ([code]+[/code])." msgid "Comma ([code],[/code]) key." msgstr "Tecla de coma ([code],[/code])." msgid "Minus ([code]-[/code]) key." msgstr "Tecla de menos ([code]-[/code])." msgid "Period ([code].[/code]) key." msgstr "Tecla de punto ([code].[/code])." msgid "Slash ([code]/[/code]) key." msgstr "Tecla de diagonal ([code]/[/code])." msgid "Number 0 key." msgstr "Techa numérica 0." msgid "Number 1 key." msgstr "Techa numérica 1." msgid "Number 2 key." msgstr "Techa numérica 2." msgid "Number 3 key." msgstr "Techa numérica 3." msgid "Number 4 key." msgstr "Techa numérica 4." msgid "Number 5 key." msgstr "Techa numérica 5." msgid "Number 6 key." msgstr "Techa numérica 6." msgid "Number 7 key." msgstr "Techa numérica 7." msgid "Number 8 key." msgstr "Techa numérica 8." msgid "Number 9 key." msgstr "Techa numérica 9." msgid "Colon ([code]:[/code]) key." msgstr "Tecla de dos puntos ([code]:[/code])." msgid "Semicolon ([code];[/code]) key." msgstr "Tecla de punto y coma ([code];[/code])." msgid "Less-than sign ([code]<[/code]) key." msgstr "Tecla menor que ([code]<[/code])." msgid "Equal sign ([code]=[/code]) key." msgstr "Signo de igualdad ([code]==[/code])." msgid "Greater-than sign ([code]>[/code]) key." msgstr "Tecla mayor que ([code]>[/code])." msgid "Question mark ([code]?[/code]) key." msgstr "Tecla de signo de interrogación ([code]?[/code])." msgid "At sign ([code]@[/code]) key." msgstr "Tecla de signo arroba ([code]@[/code])." msgid "A key." msgstr "Tecla A." msgid "B key." msgstr "Tecla B." msgid "C key." msgstr "Tecla C." msgid "D key." msgstr "Tecla D." msgid "E key." msgstr "Tecla E." msgid "F key." msgstr "Tecla F." msgid "G key." msgstr "Tecla G." msgid "H key." msgstr "Tecla H." msgid "I key." msgstr "Tecla I." msgid "J key." msgstr "Tecla J." msgid "K key." msgstr "Tecla K." msgid "L key." msgstr "Tecla L." msgid "M key." msgstr "Tecla M." msgid "N key." msgstr "Tecla N." msgid "O key." msgstr "Tecla O." msgid "P key." msgstr "Tecla P." msgid "Q key." msgstr "Tecla Q." msgid "R key." msgstr "Tecla R." msgid "S key." msgstr "Tecla S." msgid "T key." msgstr "Tecla T." msgid "U key." msgstr "Tecla U." msgid "V key." msgstr "Tecla V." msgid "W key." msgstr "Tecla W." msgid "X key." msgstr "Tecla X." msgid "Y key." msgstr "Tecla Y." msgid "Z key." msgstr "Tecla Z." msgid "Left bracket ([code][lb][/code]) key." msgstr "Tecla de corchete izquierdo ([code][lb][/code])." msgid "Backslash ([code]\\[/code]) key." msgstr "Tecla de diagonal invertida ([code]\\[/code])." msgid "Right bracket ([code][rb][/code]) key." msgstr "Tecla de corchete derecho ([code][rb][/code])." msgid "Caret ([code]^[/code]) key." msgstr "Tecla de circunflejo ([code]^[/code])." msgid "Underscore ([code]_[/code]) key." msgstr "Tecla de guión bajo ([code]_[/code])." msgid "Backtick ([code]`[/code]) key." msgstr "Tecla de acento grave ([code]`[/code])." msgid "Left brace ([code]{[/code]) key." msgstr "Tecla de llave izquierda ([code]{[/code])." msgid "Vertical bar or [i]pipe[/i] ([code]|[/code]) key." msgstr "Tecla de barra vertical o [i]pipe[/i] ([code]|[/code])." msgid "Right brace ([code]}[/code]) key." msgstr "Tecla de llave derecha ([code]}[/code])." msgid "Tilde ([code]~[/code]) key." msgstr "Tecla de virgulilla ([code]~[/code])." msgid "Yen symbol ([code]¥[/code]) key." msgstr "Tecla de símbolo del yen ([code]¥[/code])." msgid "Section sign ([code]§[/code]) key." msgstr "Signo de sección ([code]§[/code])." msgid "" "Automatically remapped to [constant KEY_META] on macOS and [constant " "KEY_CTRL] on other platforms, this mask is never set in the actual events, " "and should be used for key mapping only." msgstr "" "Es automáticamente redirigido a [constant KEY_META] en macOS y a [constant " "KEY_CTRL] en otras plataformas. Nunca se le da valor a la mascara en eventos " "reales y solo debe ser usada para redirecciones." msgid "Shift key mask." msgstr "Máscara de la tecla Shift." msgid "Alt or Option (on macOS) key mask." msgstr "Máscara de la tecla Alt u Option (en macOS)." msgid "Command (on macOS) or Meta/Windows key mask." msgstr "Máscara de la tecla Command (en macOS) o Meta/Windows." msgid "Control key mask." msgstr "Máscara de la tecla Control." msgid "Keypad key mask." msgstr "Máscara de la tecla del teclado numérico." msgid "Group Switch key mask." msgstr "Máscara de la tecla Group Switch." msgid "" "Used for keys which only appear once, or when a comparison doesn't need to " "differentiate the [code]LEFT[/code] and [code]RIGHT[/code] versions.\n" "For example, when using [method InputEvent.is_match], an event which has " "[constant KEY_LOCATION_UNSPECIFIED] will match any [enum KeyLocation] on the " "passed event." msgstr "" "Se usa para teclas que solo aparecen una vez (como 'A', 'B', 'C'...), o " "cuando no es necesario diferenciar entre la izquierda/[code]LEFT[/code] y la " "derecha/[code]RIGHT[/code] (Ctrl, Shift...).\n" "Por ejemplo, al utilizar [method InputEvent.is_match], cualquier valor de " "[enum KeyLocation] capturará un evento con [constant " "KEY_LOCATION_UNSPECIFIED]." msgid "A key which is to the left of its twin." msgstr "Una tecla que está a la izquierda de su gemela." msgid "A key which is to the right of its twin." msgstr "Una tecla que está a la derecha de su idéntica." msgid "" "Enum value which doesn't correspond to any mouse button. This is used to " "initialize [enum MouseButton] properties with a generic state." msgstr "" "Valor enum que no corresponde a ningún botón del ratón. Esto se utiliza para " "inicializar propiedades de tipo [enum MouseButton] con un valor genérico." msgid "Primary mouse button, usually assigned to the left button." msgstr "Botón principal del ratón, normalmente es el botón izquierdo." msgid "Secondary mouse button, usually assigned to the right button." msgstr "Botón secundario del ratón, normalmente es el botón derecho." msgid "Middle mouse button." msgstr "Botón central del ratón." msgid "Mouse wheel scrolling up." msgstr "Desplazamiento hacia arriba de la rueda del ratón." msgid "Mouse wheel scrolling down." msgstr "Desplazamiento hacia abajo de la rueda del ratón." msgid "Mouse wheel left button (only present on some mice)." msgstr "" "Botón izquierdo de la rueda del ratón (sólo presente en algunos ratones)." msgid "Mouse wheel right button (only present on some mice)." msgstr "Botón derecho de la rueda del ratón (sólo presente en algunos ratones)." msgid "" "Extra mouse button 1. This is sometimes present, usually to the sides of the " "mouse." msgstr "" "Botón extra del ratón 1. Este botón a veces está presente, normalmente a los " "lados del ratón." msgid "" "Extra mouse button 2. This is sometimes present, usually to the sides of the " "mouse." msgstr "" "Botón extra del ratón 2. Este botón a veces está presente, normalmente a los " "lados del ratón." msgid "Primary mouse button mask, usually for the left button." msgstr "Máscara para el botón principal del ratón, normalmente el izquierdo." msgid "Secondary mouse button mask, usually for the right button." msgstr "Máscara para el botón secundario del ratón, normalmente el derecho." msgid "Middle mouse button mask." msgstr "Máscara del botón central del ratón." msgid "Extra mouse button 1 mask." msgstr "Botón de ratón extra 1 máscara." msgid "Extra mouse button 2 mask." msgstr "Máscara de botón de ratón extra 2." msgid "An invalid game controller button." msgstr "Un botón no válido del mando de juego." msgid "" "Game controller SDL button A. Corresponds to the bottom action button: Sony " "Cross, Xbox A, Nintendo B." msgstr "" "Botón A de mando SDL. Corresponde al botón de abajo: X en Sony, A en Xbox, B " "en Nintendo." msgid "" "Game controller SDL button B. Corresponds to the right action button: Sony " "Circle, Xbox B, Nintendo A." msgstr "" "Botón B de mando SDL. Corresponde al botón de la derecha: 🞅 en Sony, B en " "Xbox, A en Nintendo." msgid "" "Game controller SDL button X. Corresponds to the left action button: Sony " "Square, Xbox X, Nintendo Y." msgstr "" "Botón X de mando SDL. Corresponde al botón de la izquierda: ◻ en Sony, X en " "Xbox, Y en Nintendo." msgid "" "Game controller SDL button Y. Corresponds to the top action button: Sony " "Triangle, Xbox Y, Nintendo X." msgstr "" "Botón Y de mando SDL. Corresponde al botón de arriba: △ en Sony, Y en Xbox, X " "en Nintendo." msgid "" "Game controller SDL back button. Corresponds to the Sony Select, Xbox Back, " "Nintendo - button." msgstr "" "Botón \"Back\" (volver) de mando SDL. Corresponde al botón Select en Sony, " "Back en Xbox, - en Nintendo." msgid "" "Game controller SDL guide button. Corresponds to the Sony PS, Xbox Home " "button." msgstr "" "Botón \"Guide\" de mando SDL. Corresponde al botón PS en Sony, Home en Xbox." msgid "" "Game controller SDL start button. Corresponds to the Sony Options, Xbox Menu, " "Nintendo + button." msgstr "" "Botón start de mando SDL. Corresponde al botón Options en Sony, Menu en Xbox, " "+ en Nintendo." msgid "" "Game controller SDL left stick button. Corresponds to the Sony L3, Xbox L/LS " "button." msgstr "" "Botón del joystick izquierdo de mando SDL. Corresponde a L3 en Sony, L/LS en " "Xbox." msgid "" "Game controller SDL right stick button. Corresponds to the Sony R3, Xbox R/RS " "button." msgstr "" "Botón del joystick derecho de mando SDL. Corresponde a R3 en Sony, R/RS en " "Xbox." msgid "" "Game controller SDL left shoulder button. Corresponds to the Sony L1, Xbox LB " "button." msgstr "" "Botón del gatillo izquierdo de mando SDL. Corresponde a L1 en Sony, LB en " "Xbox." msgid "" "Game controller SDL right shoulder button. Corresponds to the Sony R1, Xbox " "RB button." msgstr "" "Botón del gatillo derecho de mando SDL. Corresponde a R1 en Sony, RB en Xbox." msgid "Game controller D-pad up button." msgstr "Botón de arriba del D-pad del mando." msgid "Game controller D-pad down button." msgstr "Botón de abajo del D-pad del mando." msgid "Game controller D-pad left button." msgstr "Botón izquierdo del D-pad del mando." msgid "Game controller D-pad right button." msgstr "Botón derecho del D-pad del mando." msgid "" "Game controller SDL miscellaneous button. Corresponds to Xbox share button, " "PS5 microphone button, Nintendo Switch capture button." msgstr "" "Botón misceláneo de mando SDL. Corresponde a botón de compartir en Xbox, " "botón del micrófono en PS5, botón de captura en Nintendo Switch." msgid "Game controller SDL paddle 1 button." msgstr "Botón de paleta 1 del mando SDL." msgid "Game controller SDL paddle 2 button." msgstr "Botón de paleta 2 del mando SDL." msgid "Game controller SDL paddle 3 button." msgstr "Botón de paleta 3 del mando SDL." msgid "Game controller SDL paddle 4 button." msgstr "Botón de paleta 4 del mando SDL." msgid "Game controller SDL touchpad button." msgstr "Botón del panel táctil del mando SDL." msgid "The number of SDL game controller buttons." msgstr "El número de botones del mando SDL." msgid "" "The maximum number of game controller buttons supported by the engine. The " "actual limit may be lower on specific platforms:\n" "- [b]Android:[/b] Up to 36 buttons.\n" "- [b]Linux:[/b] Up to 80 buttons.\n" "- [b]Windows[/b] and [b]macOS:[/b] Up to 128 buttons." msgstr "" "El número límite de botones de mando que el motor reconoce. El límite real " "podría ser menor dependiendo de la plataforma:\n" "- [b]Android:[/b] Hasta 36 botones.\n" "- [b]Linux:[/b] Hasta 80 botones.\n" "- [b]Windows[/b] and [b]macOS:[/b] Hasta 128 botones." msgid "An invalid game controller axis." msgstr "Un eje de mando no válido." msgid "Game controller left joystick x-axis." msgstr "Eje X del joystick izquierdo del mando." msgid "Game controller left joystick y-axis." msgstr "Eje Y del joystick izquierdo del mando." msgid "Game controller right joystick x-axis." msgstr "Eje X del joystick derecho del mando." msgid "Game controller right joystick y-axis." msgstr "Eje Y del joystick derecho del mando." msgid "Game controller left trigger axis." msgstr "Eje del gatillo izquierdo del mando." msgid "Game controller right trigger axis." msgstr "Eje del gatillo derecho del mando." msgid "The number of SDL game controller axes." msgstr "El número de ejes del mando SDL." msgid "" "The maximum number of game controller axes: OpenVR supports up to 5 Joysticks " "making a total of 10 axes." msgstr "" "El número límite de ejes del mando: en OpenVR se pueden usar hasta 5 " "Joysticks, siendo el total 10 ejes." msgid "" "Does not correspond to any MIDI message. This is the default value of [member " "InputEventMIDI.message]." msgstr "" "No tiene ningún significado. Es el valor por defecto de [member " "InputEventMIDI.message]." msgid "" "MIDI message sent when a note is released.\n" "[b]Note:[/b] Not all MIDI devices send this message; some may send [constant " "MIDI_MESSAGE_NOTE_ON] with [member InputEventMIDI.velocity] set to [code]0[/" "code]." msgstr "" "Mensaje MIDI enviado cuando se suelta una nota.\n" "[b]Nota:[/b] No todos los dispositivos MIDI envían este mensaje; algunos " "pueden enviar [constant MIDI_MESSAGE_NOTE_ON] con [member " "InputEventMIDI.velocity] establecido en [code]0[/code]." msgid "MIDI message sent when a note is pressed." msgstr "Mensaje MIDI enviado cuando se presiona una tecla." msgid "" "MIDI message sent to indicate a change in pressure while a note is being " "pressed down, also called aftertouch." msgstr "" "Mensaje MIDI enviado para indicar un cambio en la presión de una tecla " "pulsada, también conocido como aftertouch." msgid "" "MIDI message sent when a controller value changes. In a MIDI device, a " "controller is any input that doesn't play notes. These may include sliders " "for volume, balance, and panning, as well as switches and pedals. See the " "[url=https://en.wikipedia.org/wiki/General_MIDI#Controller_events]General " "MIDI specification[/url] for a small list." msgstr "" "Mensaje MIDI enviado cuando cambia el valor de un controlador. En un " "dispositivo MIDI, un controlador es cualquier entrada que no reproduce notas. " "Estos pueden incluir controles de volumen, balance y panorama, así como " "interruptores y pedales. Véase la [url=https://en.wikipedia.org/wiki/" "General_MIDI#Controller_events]especificación General MIDI[/url] para obtener " "una lista breve." msgid "" "MIDI message sent when the MIDI device changes its current instrument (also " "called [i]program[/i] or [i]preset[/i])." msgstr "" "Mensaje MIDI enviado cuando el dispositivo MIDI cambia su instrumento actual " "(también llamado [i]programa[/i] o [i]ajuste predefinido[/i])." msgid "" "MIDI message sent to indicate a change in pressure for the whole channel. " "Some MIDI devices may send this instead of [constant MIDI_MESSAGE_AFTERTOUCH]." msgstr "" "Mensaje MIDI enviado para indicar un cambio de presión en todo el canal. " "Algunos dispositivos MIDI pueden enviar esto en lugar de [constant " "MIDI_MESSAGE_AFTERTOUCH]." msgid "" "MIDI message sent when the value of the pitch bender changes, usually a wheel " "on the MIDI device." msgstr "" "Mensaje MIDI enviado cuando cambia el valor del pitch bender, generalmente " "una rueda en el dispositivo MIDI." msgid "" "MIDI system exclusive (SysEx) message. This type of message is not " "standardized and it's highly dependent on the MIDI device sending it.\n" "[b]Note:[/b] Getting this message's data from [InputEventMIDI] is not " "implemented." msgstr "" "Mensaje exclusivo del sistema MIDI (SysEx). Este tipo de mensaje no está " "estandarizado y depende en gran medida del dispositivo MIDI que lo envía.\n" "[b]Nota:[/b] No se ha implementado la obtención de los datos de este mensaje " "desde [InputEventMIDI]." msgid "" "MIDI message sent every quarter frame to keep connected MIDI devices " "synchronized. Related to [constant MIDI_MESSAGE_TIMING_CLOCK].\n" "[b]Note:[/b] Getting this message's data from [InputEventMIDI] is not " "implemented." msgstr "" "Mensaje MIDI enviado cada cuarto de fotograma para mantener sincronizados los " "dispositivos MIDI conectados. Relacionado con [constant " "MIDI_MESSAGE_TIMING_CLOCK].\n" "[b]Nota:[/b] No se ha implementado la obtención de los datos de este mensaje " "desde [InputEventMIDI]." msgid "" "MIDI message sent to jump onto a new position in the current sequence or " "song.\n" "[b]Note:[/b] Getting this message's data from [InputEventMIDI] is not " "implemented." msgstr "" "Mensaje MIDI enviado para saltar a una nueva posición en la secuencia o " "canción actual.\n" "[b]Nota:[/b] No se ha implementado la obtención de los datos de este mensaje " "desde [InputEventMIDI]." msgid "" "MIDI message sent to select a sequence or song to play.\n" "[b]Note:[/b] Getting this message's data from [InputEventMIDI] is not " "implemented." msgstr "" "Mensaje MIDI enviado para seleccionar una secuencia o canción para " "reproducir.\n" "[b]Nota:[/b] La obtención de los datos de este mensaje de [InputEventMIDI] no " "está implementada." msgid "" "MIDI message sent to request a tuning calibration. Used on analog " "synthesizers. Most modern MIDI devices do not need this message." msgstr "" "Mensaje MIDI enviado para solicitar una calibración de afinación. Se utiliza " "en sintetizadores analógicos. La mayoría de los dispositivos MIDI modernos no " "requieren este mensaje." msgid "" "MIDI message sent 24 times after [constant MIDI_MESSAGE_QUARTER_FRAME], to " "keep connected MIDI devices synchronized." msgstr "" "Mensaje MIDI enviado 24 veces después de [constant " "MIDI_MESSAGE_QUARTER_FRAME], para mantener sincronizados los dispositivos " "MIDI conectados." msgid "" "MIDI message sent to start the current sequence or song from the beginning." msgstr "" "Mensaje MIDI enviado para iniciar la secuencia o canción actual desde el " "principio." msgid "" "MIDI message sent to resume from the point the current sequence or song was " "paused." msgstr "" "Mensaje MIDI enviado para reanudar la secuencia o canción actual desde el " "punto en que se pausó." msgid "MIDI message sent to pause the current sequence or song." msgstr "Mensaje MIDI enviado para pausar la secuencia o canción actual." msgid "" "MIDI message sent repeatedly while the MIDI device is idle, to tell the " "receiver that the connection is alive. Most MIDI devices do not send this " "message." msgstr "" "Mensaje MIDI enviado repetidamente mientras el dispositivo MIDI está " "inactivo, para indicar al receptor que la conexión sigue activa. La mayoría " "de los dispositivos MIDI no envían este mensaje." msgid "" "MIDI message sent to reset a MIDI device to its default state, as if it was " "just turned on. It should not be sent when the MIDI device is being turned on." msgstr "" "Mensaje MIDI enviado para restablecer un dispositivo MIDI a su estado " "predeterminado, como si recién se hubiera encendido. No debe enviarse al " "encender el dispositivo MIDI." msgid "" "Methods that return [enum Error] return [constant OK] when no error " "occurred.\n" "Since [constant OK] has value [code]0[/code], and all other error constants " "are positive integers, it can also be used in boolean checks.\n" "[codeblock]\n" "var error = method_that_returns_error()\n" "if error != OK:\n" "\tprinterr(\"Failure!\")\n" "\n" "# Or, alternatively:\n" "if error:\n" "\tprinterr(\"Still failing!\")\n" "[/codeblock]\n" "[b]Note:[/b] Many functions do not return an error code, but will print error " "messages to standard output." msgstr "" "Los métodos que devuelven [enum Error] devuelven [constant OK] cuando no se " "ha producido ningún error.\n" "Dado que [constant OK] tiene el valor [code]0[/code], y todas las demás " "constantes de error son enteros positivos, también se puede utilizar en " "comprobaciones booleanas.\n" "[codeblock]\n" "var error = method_that_returns_error()\n" "if error != OK:\n" "\tprinterr(\"¡Fallo!\")\n" "\n" "# O, alternativamente:\n" "if error:\n" "\tprinterr(\"¡Sigue fallando!\")\n" "[/codeblock]\n" "[b]Nota:[/b] Muchas funciones no devuelven un código de error, sino que " "imprimen mensajes de error en la salida estándar." msgid "Generic error." msgstr "Error genérico." msgid "Unavailable error." msgstr "Error no disponible." msgid "Unconfigured error." msgstr "Error sin configurar." msgid "Unauthorized error." msgstr "Error no autorizado." msgid "Parameter range error." msgstr "Error de rango de parámetros." msgid "Out of memory (OOM) error." msgstr "Error de falta de memoria (OOM)." msgid "File: Not found error." msgstr "Archivo: Error archivo no encontrado." msgid "File: Bad drive error." msgstr "Archivo: Error de unidad defectuosa." msgid "File: Bad path error." msgstr "Archivo: Error ruta incorrecta." msgid "File: No permission error." msgstr "Archivo: Error sin permiso." msgid "File: Already in use error." msgstr "Archivo: Error archivo ya esta siendo usado." msgid "File: Can't open error." msgstr "Archivo: Error no se puede abrir." msgid "File: Can't write error." msgstr "Archivo: Error no se puede escribir." msgid "File: Can't read error." msgstr "Archivo: Error no se puede leer." msgid "File: Unrecognized error." msgstr "Archivo: Error no reconocido." msgid "File: Corrupt error." msgstr "Archivo: Error de corrupción." msgid "File: Missing dependencies error." msgstr "Archivo: Error no se encuentran las dependencias." msgid "File: End of file (EOF) error." msgstr "Archivo: Error Fin de fichero (EOF)." msgid "Can't open error." msgstr "Error: No se puede abrir." msgid "Can't create error." msgstr "Error: No se puede crear." msgid "Query failed error." msgstr "Error: Fallo en la consulta." msgid "Already in use error." msgstr "Error: Ya está en uso." msgid "Locked error." msgstr "Error Bloqueado (Locked error)." msgid "Timeout error." msgstr "Error: Tiempo de espera excedido." msgid "Can't connect error." msgstr "Error: No se puede conectar." msgid "Can't resolve error." msgstr "Error: No se puede resolver." msgid "Connection error." msgstr "Error de conexión." msgid "Can't acquire resource error." msgstr "Error: No se pudo adquirir el recurso." msgid "Can't fork process error." msgstr "Error: No se pudo bifurcar el proceso." msgid "Invalid data error." msgstr "Error de datos inválidos." msgid "Invalid parameter error." msgstr "Error de parámetro inválido." msgid "Already exists error." msgstr "Error: Ya existe." msgid "Does not exist error." msgstr "Error: No existe." msgid "Database: Read error." msgstr "Base de datos: Error de lectura." msgid "Database: Write error." msgstr "Base de datos: Error de escritura." msgid "Compilation failed error." msgstr "Error de compilación fallida." msgid "Method not found error." msgstr "Error: Método no encontrado." msgid "Linking failed error." msgstr "Error de enlace fallido." msgid "Script failed error." msgstr "Error de script fallido." msgid "Cycling link (import cycle) error." msgstr "Error de enlazado cíclico (import cycle)." msgid "Invalid declaration error." msgstr "Error de declaración inválida." msgid "Duplicate symbol error." msgstr "Error de símbolo duplicado." msgid "Parse error." msgstr "Error de análisis." msgid "Busy error." msgstr "Error recurso ocupado." msgid "Skip error." msgstr "Error de omisión." msgid "" "Help error. Used internally when passing [code]--version[/code] or [code]--" "help[/code] as executable options." msgstr "" "Error de ayuda. Se usa internamente al pasar [code]--version[/code] o [code]--" "help[/code] como opciones ejecutables." msgid "" "Bug error, caused by an implementation issue in the method.\n" "[b]Note:[/b] If a built-in method returns this code, please open an issue on " "[url=https://github.com/godotengine/godot/issues]the GitHub Issue Tracker[/" "url]." msgstr "" "Error causado por un problema de implementación en el método.\n" "[b]Nota:[/b] Si un método integrado devuelve este código, por favor abre una " "incidencia en el [url=https://github.com/godotengine/godot/issues]Rastreador " "de incidencias de GitHub[/url]." msgid "" "Hints that an [int], [String], or [StringName] property is an enumerated " "value to pick in a list specified via a hint string.\n" "The hint string is a comma separated list of names such as [code]" "\"Hello,Something,Else\"[/code]. Whitespace is [b]not[/b] removed from either " "end of a name. For integer properties, the first name in the list has value " "0, the next 1, and so on. Explicit values can also be specified by appending " "[code]:integer[/code] to the name, e.g. [code]" "\"Zero,One,Three:3,Four,Six:6\"[/code]." msgstr "" "Indica que una propiedad [int], [String] o [StringName] es un valor enumerado " "que se selecciona en una lista especificada mediante una string de pista.\n" "La string de pista es una lista de nombres separados por comas, como [code]" "\"Hello,Something,Else\"[/code]. Los espacios en blanco [b]no[/b] se eliminan " "de ninguno de los extremos de un nombre. Para las propiedades enteras, el " "primer nombre de la lista tiene el valor 0, el siguiente 1, y así " "sucesivamente. También se pueden especificar valores explícitos añadiendo " "[code]:integer[/code] al nombre, por ejemplo, [code]" "\"Zero,One,Three:3,Four,Six:6\"[/code]." msgid "" "Hints that a [String] or [StringName] property can be an enumerated value to " "pick in a list specified via a hint string such as [code]" "\"Hello,Something,Else\"[/code]. See [constant PROPERTY_HINT_ENUM] for " "details.\n" "Unlike [constant PROPERTY_HINT_ENUM], a property with this hint still accepts " "arbitrary values and can be empty. The list of values serves to suggest " "possible values." msgstr "" "Indica que una propiedad [String] o [StringName] puede ser un valor enumerado " "para elegir en una lista especificada a través de una string de pista como " "[code]\"Hola,algo,más\"[/code]. Véase [constant PROPERTY_HINT_ENUM] para más " "detalles.\n" "A diferencia de [constant PROPERTY_HINT_ENUM], una propiedad con esta pista " "sigue aceptando valores arbitrarios y puede estar vacía. La lista de valores " "sirve para sugerir posibles valores." msgid "" "Hints that an [int] property is a bitmask with named bit flags.\n" "The hint string is a comma separated list of names such as [code]" "\"Bit0,Bit1,Bit2,Bit3\"[/code]. Whitespace is [b]not[/b] removed from either " "end of a name. The first name in the list has value 1, the next 2, then 4, 8, " "16 and so on. Explicit values can also be specified by appending " "[code]:integer[/code] to the name, e.g. [code]\"A:4,B:8,C:16\"[/code]. You " "can also combine several flags ([code]\"A:4,B:8,AB:12,C:16\"[/code]).\n" "[b]Note:[/b] A flag value must be at least [code]1[/code] and at most [code]2 " "** 32 - 1[/code].\n" "[b]Note:[/b] Unlike [constant PROPERTY_HINT_ENUM], the previous explicit " "value is not taken into account. For the hint [code]\"A:16,B,C\"[/code], A is " "16, B is 2, C is 4." msgstr "" "Indica que una propiedad [int] es una máscara de bits con bits con nombre.\n" "La string de sugerencia es una lista de nombres separada por comas, por " "ejemplo [code]\"Bit0,Bit1,Bit2,Bit3\"[/code]. Los espacios en blanco [b]no[/" "b] se eliminan de ninguno de los extremos de un nombre. El primer nombre de " "la lista tiene el valor 1, el siguiente 2, luego 4, 8, 16, y así " "sucesivamente. También se pueden especificar valores explícitos añadiendo " "[code]:integer[/code] al nombre, p. ej. [code]\"A:4,B:8,C:16\"[/code]. " "También puedes combinar varias banderas ([code]\"A:4,B:8,AB:12,C:16\"[/" "code]).\n" "[b]Nota:[/b] El valor de una bandera debe ser al menos [code]1[/code] y como " "máximo [code]2 ** 32 - 1[/code].\n" "[b]Nota:[/b] A diferencia de [constant PROPERTY_HINT_ENUM], el valor " "explícito previo no se tiene en cuenta. Para la string de sugerencia [code]" "\"A:16,B,C\"[/code], A es 16, B es 2, C es 4." msgid "" "Hints that an [int] property is a bitmask using the optionally named 2D " "render layers." msgstr "" "Indica que una propiedad [int] es una máscara de bits usando las, " "opcionalmente nombradas, capas de renderizado 2D." msgid "" "Hints that an [int] property is a bitmask using the optionally named 2D " "physics layers." msgstr "" "Indica que una propiedad [int] es una máscara de bits usando las, " "opcionalmente nombradas, capas de física 2D." msgid "" "Hints that an [int] property is a bitmask using the optionally named 2D " "navigation layers." msgstr "" "Sugiere que una propiedad [int] es una máscara de bits que utiliza las capas " "de navegación 2D, opcionalmente nombradas." msgid "" "Hints that an [int] property is a bitmask using the optionally named 3D " "render layers." msgstr "" "Sugiere que una propiedad [int] es una máscara de bits que utiliza las capas " "de renderizado 3D, opcionalmente nombradas." msgid "" "Hints that an [int] property is a bitmask using the optionally named 3D " "physics layers." msgstr "" "Sugiere que una propiedad [int] es una máscara de bits que utiliza las capas " "físicas 3D, opcionalmente nombradas." msgid "" "Hints that an [int] property is a bitmask using the optionally named 3D " "navigation layers." msgstr "" "Sugiere que una propiedad [int] es una máscara de bits utilizando las capas " "de navegación 3D con nombres opcionales." msgid "" "Hints that an integer property is a bitmask using the optionally named " "avoidance layers." msgstr "" "Sugiere que una propiedad entera es una máscara de bits utilizando las capas " "de evitación con nombres opcionales." msgid "" "Hints that a [String] property is a path to a file. Editing it will show a " "file dialog for picking the path. The hint string can be a set of filters " "with wildcards like [code]\"*.png,*.jpg\"[/code]. By default the file will be " "stored as UID whenever available. You can use [ResourceUID] methods to " "convert it back to path. For storing a raw path, use [constant " "PROPERTY_HINT_FILE_PATH]." msgstr "" "Sugiere que una propiedad [String] es una ruta a un archivo. Editarla " "mostrará un diálogo de archivo para seleccionar la ruta. La string de " "sugerencia puede ser un conjunto de filtros con comodines como [code]" "\"*.png,*.jpg\"[/code]. Por defecto, el archivo se guardará como UID siempre " "que esté disponible. Puedes usar los métodos [ResourceUID] para convertirlo " "de nuevo a la ruta. Para guardar una ruta raw, usa [constant " "PROPERTY_HINT_FILE_PATH]." msgid "" "Hints that a [String] property is a path to a directory. Editing it will show " "a file dialog for picking the path." msgstr "" "Sugiere que una propiedad [String] es una ruta a un directorio. Editarla " "mostrará un diálogo de archivo para seleccionar la ruta." msgid "" "Hints that a [String] property is an absolute path to a file outside the " "project folder. Editing it will show a file dialog for picking the path. The " "hint string can be a set of filters with wildcards, like [code]" "\"*.png,*.jpg\"[/code]." msgstr "" "Sugiere que una propiedad [String] es una ruta absoluta a un archivo fuera de " "la carpeta del proyecto. Editarla mostrará un diálogo de archivo para " "seleccionar la ruta. La string de sugerencia puede ser un conjunto de filtros " "con comodines como [code]\"*.png,*.jpg\"[/code]." msgid "" "Hints that a [String] property is an absolute path to a directory outside the " "project folder. Editing it will show a file dialog for picking the path." msgstr "" "Sugiere que una propiedad de tipo [String] es una ruta absoluta a un " "directorio fuera de la carpeta del proyecto. Al editarla, se mostrará un " "diálogo de archivo para seleccionar la ruta." msgid "" "Hints that a property is an instance of a [Resource]-derived type, optionally " "specified via the hint string (e.g. [code]\"Texture2D\"[/code]). Editing it " "will show a popup menu of valid resource types to instantiate." msgstr "" "Sugiere que una propiedad es una instancia de un tipo derivado de [Resource], " "opcionalmente especificado a través de la string de sugerencia (p. ej., [code]" "\"Texture2D\"[/code]). Al editarla, se mostrará un menú emergente de tipos de " "recursos válidos para instanciar." msgid "" "Hints that a [String] property is text with line breaks. Editing it will show " "a text input field where line breaks can be typed.\n" "The hint string can be set to [code]\"monospace\"[/code] to force the input " "field to use a monospaced font.\n" "If the hint string [code]\"no_wrap\"[/code] is set, the input field will not " "wrap lines at boundaries, instead resorting to making the area scrollable." msgstr "" "Indica que una propiedad [String] es texto con saltos de línea. Al editarla, " "aparecerá un campo de entrada de texto en el que se pueden escribir saltos de " "línea.\n" "La string de sugerencia se puede establecer en [code]\"monospace\"[/code] " "para forzar que el campo de entrada utilice una fuente monoespaciada.\n" "Si se establece la string de sugerencia [code]\"no_wrap\"[/code], el campo de " "entrada no ajustará las líneas en los límites, sino que recurrirá a hacer que " "el área sea desplazable." msgid "Hints that a [String] property is an [Expression]." msgstr "Indica que una propiedad [String] es una [Expression]." msgid "" "Hints that a [String] property should show a placeholder text on its input " "field, if empty. The hint string is the placeholder text to use." msgstr "" "Sugiere que una propiedad de tipo [String] debe mostrar un texto de marcador " "de posición en su campo de entrada si está vacío. La string de sugerencia es " "el texto de marcador de posición que se usará." msgid "" "Hints that a [Color] property should be edited without affecting its " "transparency ([member Color.a] is not editable)." msgstr "" "Sugiere que una propiedad de tipo [Color] debe editarse sin afectar su " "transparencia ([member Color.a] no es editable)." msgid "" "Hints that the property's value is an object encoded as object ID, with its " "type specified in the hint string. Used by the debugger." msgstr "" "Indica que el valor de la propiedad es un objeto codificado como ID de " "objeto, con su tipo especificado en la string de indicación. Usado por el " "depurador." msgid "This hint is not used by the engine." msgstr "Esta sugerencia no es utilizada por el motor." msgid "Hints that an object is too big to be sent via the debugger." msgstr "" "Indica que un objeto es demasiado grande para ser enviado a través del " "depurador." msgid "" "Hints that the hint string specifies valid node types for property of type " "[NodePath]." msgstr "" "Indica que la string de indicación especifica tipos de nodos válidos para una " "propiedad de tipo [NodePath]." msgid "" "Hints that a [String] property is a path to a file. Editing it will show a " "file dialog for picking the path for the file to be saved at. The dialog has " "access to the project's directory. The hint string can be a set of filters " "with wildcards like [code]\"*.png,*.jpg\"[/code]. See also [member " "FileDialog.filters]." msgstr "" "Sugiere que una propiedad de tipo [String] es una ruta a un archivo. Al " "editarla, se mostrará un diálogo de archivo para seleccionar la ruta del " "archivo que se guardará. El diálogo tiene acceso al directorio del proyecto. " "La string de sugerencia puede ser un conjunto de filtros con comodines como " "[code]\"*.png,*.jpg\"[/code]. Véase también [member FileDialog.filters]." msgid "" "Hints that a [String] property is a path to a file. Editing it will show a " "file dialog for picking the path for the file to be saved at. The dialog has " "access to the entire filesystem. The hint string can be a set of filters with " "wildcards like [code]\"*.png,*.jpg\"[/code]. See also [member " "FileDialog.filters]." msgstr "" "Sugiere que una propiedad de tipo [String] es una ruta a un archivo. Al " "editarla, se mostrará un diálogo de archivo para seleccionar la ruta del " "archivo que se guardará. El diálogo tiene acceso a todo el sistema de " "archivos. La string de sugerencia puede ser un conjunto de filtros con " "comodines como [code]\"*.png,*.jpg\"[/code]. Véase también [member " "FileDialog.filters]." msgid "Hints that an [int] property is a pointer. Used by GDExtension." msgstr "Sugiere que una propiedad [int] es un puntero. Usado por GDExtension." msgid "" "Hints that a property is an [Array] with the stored type specified in the " "hint string. The hint string contains the type of the array (e.g. [code]" "\"String\"[/code]).\n" "Use the hint string format from [constant PROPERTY_HINT_TYPE_STRING] for more " "control over the stored type." msgstr "" "Sugiere que una propiedad es un [Array] con el tipo almacenado especificado " "en la string de sugerencia. La string de sugerencia contiene el tipo del " "array (ej. [code]\"String\"[/code]).\n" "Utiliza el formato de string de sugerencia de [constant " "PROPERTY_HINT_TYPE_STRING] para tener más control sobre el tipo almacenado." msgid "" "Hints that a property is a [Dictionary] with the stored types specified in " "the hint string. The hint string contains the key and value types separated " "by a semicolon (e.g. [code]\"int;String\"[/code]).\n" "Use the hint string format from [constant PROPERTY_HINT_TYPE_STRING] for more " "control over the stored types." msgstr "" "Indica que una propiedad es un [Dictionary] que contiene tipos específicos " "usando una string. La string contiene una clave y valor separados por punto y " "coma (p. ej. [code]\"int;String\"[/code]).\n" "Usa el formato de string de pista de [constant PROPERTY_HINT_TYPE_STRING] " "para un mayor control sobre los tipos almacenados." msgid "" "Hints that a string property is a locale code. Editing it will show a locale " "dialog for picking language and country." msgstr "" "Sugiere que una propiedad de tipo string es un código de configuración " "regional. Al editarla, se mostrará un diálogo de configuración regional para " "seleccionar el idioma y el país." msgid "" "Hints that a dictionary property is string translation map. Dictionary keys " "are locale codes and, values are translated strings." msgstr "" "Indica que una propiedad tipo diccionario es un mapa de traducción de " "strings. Las claves del diccionario son códigos de idioma y los valores son " "las strings traducidas." msgid "" "Hints that a property is an instance of a [Node]-derived type, optionally " "specified via the hint string (e.g. [code]\"Node2D\"[/code]). Editing it will " "show a dialog for picking a node from the scene." msgstr "" "Sugiere que una propiedad es una instancia de un tipo derivado de [Node], " "especificado opcionalmente a través de la string de sugerencias (p. ej., " "[code]\"Node2D\"[/code]). Al editarla, se mostrará un diálogo para " "seleccionar un nodo de la escena." msgid "" "Hints that a quaternion property should disable the temporary euler editor." msgstr "" "Indica que una propiedad de tipo cuaternión debe desactivar el editor " "temporal de ángulos de Euler." msgid "" "Hints that a string property is a password, and every character is replaced " "with the secret character." msgstr "" "Indica que una propiedad de tipo string es una contraseña, y cada carácter se " "reemplaza con un carácter secreto." msgid "" "Hints that a [Callable] property should be displayed as a clickable button. " "When the button is pressed, the callable is called. The hint string specifies " "the button text and optionally an icon from the [code]\"EditorIcons\"[/code] " "theme type.\n" "[codeblock lang=text]\n" "\"Click me!\" - A button with the text \"Click me!\" and the default " "\"Callable\" icon.\n" "\"Click me!,ColorRect\" - A button with the text \"Click me!\" and the " "\"ColorRect\" icon.\n" "[/codeblock]\n" "[b]Note:[/b] A [Callable] cannot be properly serialized and stored in a file, " "so it is recommended to use [constant PROPERTY_USAGE_EDITOR] instead of " "[constant PROPERTY_USAGE_DEFAULT]." msgstr "" "Sugiere que una propiedad [Callable] debe mostrarse como un botón " "presionable. Cuando se presiona el botón, se llama al invocable. La string de " "sugerencia especifica el texto del botón y, opcionalmente, un icono del tipo " "de tema [code]\"EditorIcons\"[/code].\n" "[codeblock lang=text]\n" "\"¡Haz clic aquí!\" - Un botón con el texto \"¡Haz clic aquí!\" y el icono " "\"Callable\" predeterminado.\n" "\"¡Haz clic aquí!,ColorRect\" - Un botón con el texto \"¡Haz clic aquí!\" y " "el icono \"ColorRect\".\n" "[/codeblock]\n" "[b]Nota:[/b] Un [Callable] no puede ser serializado y almacenado " "correctamente en un archivo, por lo que se recomienda utilizar [constant " "PROPERTY_USAGE_EDITOR] en lugar de [constant PROPERTY_USAGE_DEFAULT]." msgid "" "Hints that a property will be changed on its own after setting, such as " "[member AudioStreamPlayer.playing] or [member GPUParticles3D.emitting]." msgstr "" "Sugiere que una propiedad cambiará por sí sola después de la configuración, " "como [member AudioStreamPlayer.playing] o [member GPUParticles3D.emitting]." msgid "" "Hints that a boolean property will enable the feature associated with the " "group that it occurs in. The property will be displayed as a checkbox on the " "group header. Only works within a group or subgroup.\n" "By default, disabling the property hides all properties in the group. Use the " "optional hint string [code]\"checkbox_only\"[/code] to disable this behavior." msgstr "" "Sugiere que una propiedad booleana habilitará la función asociada con el " "grupo en el que aparece. La propiedad se mostrará como una casilla de " "verificación en el encabezado del grupo. Solo funciona dentro de un grupo o " "subgrupo.\n" "Por defecto, la desactivación de la propiedad oculta todas las propiedades " "del grupo. Utiliza la string de sugerencia opcional [code]\"checkbox_only\"[/" "code] para desactivar este comportamiento." msgid "" "Hints that a [String] or [StringName] property is the name of an input " "action. This allows the selection of any action name from the Input Map in " "the Project Settings. The hint string may contain two options separated by " "commas:\n" "- If it contains [code]\"show_builtin\"[/code], built-in input actions are " "included in the selection.\n" "- If it contains [code]\"loose_mode\"[/code], loose mode is enabled. This " "allows inserting any action name even if it's not present in the input map." msgstr "" "Sugiere que una propiedad [String] o [StringName] es el nombre de una acción " "de entrada. Esto permite la selección de cualquier nombre de acción del Mapa " "de entrada en la Configuración del Proyecto. La string de sugerencia puede " "contener dos opciones separadas por comas:\n" "- Si contiene [code]\"show_builtin\"[/code], las acciones de entrada " "incorporadas se incluyen en la selección.\n" "- Si contiene [code]\"loose_mode\"[/code], el modo loose está habilitado. " "Esto permite insertar cualquier nombre de acción, incluso si no está presente " "en el mapa de entrada." msgid "" "Like [constant PROPERTY_HINT_FILE], but the property is stored as a raw path, " "not UID. That means the reference will be broken if you move the file. " "Consider using [constant PROPERTY_HINT_FILE] when possible." msgstr "" "Similar a [constant PROPERTY_HINT_FILE], pero la propiedad se almacena como " "una ruta raw, no como UID. Eso significa que la referencia se romperá si " "mueves el archivo. Considera usar [constant PROPERTY_HINT_FILE] cuando sea " "posible." msgid "Represents the size of the [enum PropertyHint] enum." msgstr "Representa el tamaño del enum [enum PropertyHint]." msgid "" "The property is not stored, and does not display in the editor. This is the " "default for non-exported properties." msgstr "" "La propiedad no se almacena ni se muestra en el editor. Este es el " "comportamiento predeterminado para propiedades no exportadas." msgid "" "The property is serialized and saved in the scene file (default for exported " "properties)." msgstr "" "La propiedad se serializa y se guarda en el archivo de la escena (por defecto " "para propiedades exportadas)." msgid "" "The property is shown in the [EditorInspector] (default for exported " "properties)." msgstr "" "La propiedad se muestra en el [EditorInspector] (por defecto para propiedades " "exportadas)." msgid "The property is excluded from the class reference." msgstr "La propiedad se excluye de la referencia de la clase." msgid "The property can be checked in the [EditorInspector]." msgstr "La propiedad se puede comprobar en el [EditorInspector]." msgid "The property is checked in the [EditorInspector]." msgstr "La propiedad se comprueba en el [EditorInspector]." msgid "Used to group properties together in the editor. See [EditorInspector]." msgstr "" "Se utiliza para agrupar propiedades en el editor. Véase [EditorInspector]." msgid "Used to categorize properties together in the editor." msgstr "Se usa para categorizar las propiedades juntas en el editor." msgid "" "Used to group properties together in the editor in a subgroup (under a " "group). See [EditorInspector]." msgstr "" "Se utiliza para agrupar propiedades en el editor en un subgrupo (bajo un " "grupo). Véase [EditorInspector]." msgid "" "The property is a bitfield, i.e. it contains multiple flags represented as " "bits." msgstr "" "La propiedad es un campo de bits, es decir, contiene múltiples banderas " "representadas como bits." msgid "The property does not save its state in [PackedScene]." msgstr "La propiedad no guarda su estado en [PackedScene]." msgid "Editing the property prompts the user for restarting the editor." msgstr "" "Al editar la propiedad, el usuario debe reiniciar el editor para que el " "cambio tenga efecto." msgid "" "The property is a script variable. [constant PROPERTY_USAGE_SCRIPT_VARIABLE] " "can be used to distinguish between exported script variables from built-in " "variables (which don't have this usage flag). By default, [constant " "PROPERTY_USAGE_SCRIPT_VARIABLE] is [b]not[/b] applied to variables that are " "created by overriding [method Object._get_property_list] in a script." msgstr "" "La propiedad es una variable de script. [constant " "PROPERTY_USAGE_SCRIPT_VARIABLE] se puede utilizar para distinguir entre las " "variables de script exportadas y las variables incorporadas (que no tienen " "este flag de uso). Por defecto, [constant PROPERTY_USAGE_SCRIPT_VARIABLE] " "[b]no[/b] se aplica a las variables que se crean al sobrescribir [method " "Object._get_property_list] en un script." msgid "" "The property value of type [Object] will be stored even if its value is " "[code]null[/code]." msgstr "" "El valor de la propiedad de tipo [Object] se almacenará incluso si su valor " "es [code]null[/code]." msgid "If this property is modified, all inspector fields will be refreshed." msgstr "" "Si esta propiedad se modifica, todos los campos del inspector se actualizarán." msgid "This flag is not used by the engine." msgstr "Esta bandera no es usada por el motor." msgid "" "The property is a variable of enum type, i.e. it only takes named integer " "constants from its associated enumeration." msgstr "" "La propiedad es una variable de tipo enum, solo acepta constantes enteras " "nombradas de su enumeración asociada." msgid "" "If property has [code]nil[/code] as default value, its type will be [Variant]." msgstr "" "Si la propiedad tiene [code]nil[/code] como valor predeterminado, su tipo " "será [Variant]." msgid "" "The property is the element count of a property array, i.e. a list of groups " "of related properties. Properties defined with this usage also need a " "specific [code]class_name[/code] field in the form of [code]label,prefix[/" "code]. The field may also include additional comma-separated options:\n" "- [code]page_size=N[/code]: Overrides [member EditorSettings.interface/" "inspector/max_array_dictionary_items_per_page] for this array.\n" "- [code]add_button_text=text[/code]: The text displayed by the \"Add " "Element\" button.\n" "- [code]static[/code]: The elements can't be re-arranged.\n" "- [code]const[/code]: New elements can't be added.\n" "- [code]numbered[/code]: An index will appear next to each element.\n" "- [code]unfoldable[/code]: The array can't be folded.\n" "- [code]swap_method=method_name[/code]: The method that will be called when " "two elements switch places. The method should take 2 [int] parameters, which " "will be indices of the elements being swapped.\n" "Note that making a full-fledged property array requires boilerplate code " "involving [method Object._get_property_list]." msgstr "" "La propiedad es el recuento de elementos de un array de propiedades, es " "decir, una lista de grupos de propiedades relacionadas. Las propiedades " "definidas con este uso también necesitan un campo específico " "[code]class_name[/code] en forma de [code]label,prefix[/code]. El campo " "también puede incluir opciones adicionales separadas por comas:\n" "- [code]page_size=N[/code]: Anula [member EditorSettings.interface/inspector/" "max_array_dictionary_items_per_page] para este array.\n" "- [code]add_button_text=text[/code]: El texto que se muestra en el botón " "\"Añadir elemento\".\n" "- [code]static[/code]: Los elementos no se pueden reorganizar.\n" "- [code]const[/code]: No se pueden añadir nuevos elementos.\n" "- [code]numbered[/code]: Aparecerá un índice junto a cada elemento.\n" "- [code]unfoldable[/code]: El array no se puede plegar.\n" "- [code]swap_method=method_name[/code]: El método que se llamará cuando dos " "elementos cambien de lugar. El método debe tomar 2 parámetros [int], que " "serán los índices de los elementos que se intercambian.\n" "Ten en cuenta que para crear una matriz de propiedades completa se requiere " "código repetitivo que incluya [method Object._get_property_list]." msgid "" "When duplicating a resource with [method Resource.duplicate], and this flag " "is set on a property of that resource, the property should always be " "duplicated, regardless of the [code]subresources[/code] bool parameter." msgstr "" "Al duplicar un recurso con [method Resource.duplicate], y este flag está " "establecido en una propiedad de ese recurso, la propiedad siempre debe ser " "duplicada, independientemente del parámetro bool [code]subresources[/code]." msgid "" "When duplicating a resource with [method Resource.duplicate], and this flag " "is set on a property of that resource, the property should never be " "duplicated, regardless of the [code]subresources[/code] bool parameter." msgstr "" "Al duplicar un recurso con [method Resource.duplicate], y este flag está " "establecido en una propiedad de ese recurso, la propiedad nunca debe ser " "duplicada, independientemente del parámetro bool [code]subresources[/code]." msgid "" "The property is only shown in the editor if modern renderers are supported " "(the Compatibility rendering method is excluded)." msgstr "" "La propiedad solo se muestra en el editor si se admiten renderizadores " "modernos (se excluye el método de renderizado de compatibilidad)." msgid "" "The [NodePath] property will always be relative to the scene's root. Mostly " "useful for local resources." msgstr "" "La propiedad [NodePath] siempre será relativa a la raíz de la escena. " "Principalmente útil para recursos locales." msgid "" "Use when a resource is created on the fly, i.e. the getter will always return " "a different instance. [ResourceSaver] needs this information to properly save " "such resources." msgstr "" "Se usa cuando un recurso se crea dinámicamente, es decir, el getter siempre " "devuelve una instancia diferente. [ResourceSaver] necesita esta información " "para guardar correctamente dichos recursos." msgid "" "Inserting an animation key frame of this property will automatically " "increment the value, allowing to easily keyframe multiple values in a row." msgstr "" "Insertar un fotograma clave de animación de esta propiedad incrementará " "automáticamente el valor, permitiendo animar fácilmente múltiples valores " "consecutivos." msgid "" "When this property is a [Resource] and base object is a [Node], a resource " "instance will be automatically created whenever the node is created in the " "editor." msgstr "" "Cuando esta propiedad es un [Resource] y el objeto base es un [Node], se " "creará automáticamente una instancia del recurso cada vez que el nodo se cree " "en el editor." msgid "" "The property is considered a basic setting and will appear even when advanced " "mode is disabled. Used for project settings." msgstr "" "La propiedad se considera una configuración básica y aparecerá incluso cuando " "el modo avanzado esté desactivado. Se usa para configuraciones del proyecto." msgid "The property is read-only in the [EditorInspector]." msgstr "La propiedad es de solo lectura en el [EditorInspector]." msgid "" "An export preset property with this flag contains confidential information " "and is stored separately from the rest of the export preset configuration." msgstr "" "Una propiedad de preset de exportación con esta bandera contiene información " "confidencial y se almacena por separado del resto de la configuración del " "preset de exportación." msgid "Default usage (storage and editor)." msgstr "Uso por defecto (almacenamiento y editor)." msgid "Default usage but without showing the property in the editor (storage)." msgstr "" "Uso por defecto, pero sin mostrar la propiedad en el editor (almacenamiento)." msgid "Flag for a normal method." msgstr "Bandera para un método normal." msgid "Flag for an editor method." msgstr "Bandera para un método editor." msgid "Flag for a constant method." msgstr "Bandera para un método constante." msgid "Flag for a virtual method." msgstr "Bandera para un método virtual." msgid "Flag for a method with a variable number of arguments." msgstr "Indicador para un método con un número variable de argumentos." msgid "Flag for a static method." msgstr "Bandera para un método estático." msgid "" "Used internally. Allows to not dump core virtual methods (such as [method " "Object._notification]) to the JSON API." msgstr "" "Uso interno. Permite no volcar métodos virtuales centrales (como [method " "Object._notification]) en la API JSON." msgid "" "Flag for a virtual method that is required. In GDScript, this flag is set for " "abstract functions." msgstr "" "Bandera para un método virtual que es requerido. En GDScript, este flag se " "establece para funciones abstractas." msgid "Default method flags (normal)." msgstr "Banderas de método por defecto (normal)." msgid "Variable is [code]null[/code]." msgstr "La variable es [code]null[/code]." msgid "Variable is of type [bool]." msgstr "La variable es de tipo [bool]." msgid "Variable is of type [int]." msgstr "La variable es de tipo [int]." msgid "Variable is of type [float]." msgstr "La variable es de tipo [float]." msgid "Variable is of type [String]." msgstr "La variable es de tipo [String]." msgid "Variable is of type [Vector2]." msgstr "La variable es de tipo [Vector2]." msgid "Variable is of type [Vector2i]." msgstr "La variable es de tipo [Vector2i]." msgid "Variable is of type [Rect2]." msgstr "La variable es de tipo [Rect2]." msgid "Variable is of type [Rect2i]." msgstr "La variable es de tipo [Rect2i]." msgid "Variable is of type [Vector3]." msgstr "La variable es de tipo [Vector3]." msgid "Variable is of type [Vector3i]." msgstr "La variable es de tipo [Vector3i]." msgid "Variable is of type [Transform2D]." msgstr "La variable es de tipo [Transform2D]." msgid "Variable is of type [Vector4]." msgstr "La variable es de tipo [Vector4]." msgid "Variable is of type [Vector4i]." msgstr "La variable es de tipo [Vector4i]." msgid "Variable is of type [Plane]." msgstr "La variable es de tipo [Plane]." msgid "Variable is of type [Quaternion]." msgstr "La variable es de tipo [Quaternion]." msgid "Variable is of type [AABB]." msgstr "La variable es de tipo [AABB]." msgid "Variable is of type [Basis]." msgstr "La variable es de tipo [Basis]." msgid "Variable is of type [Transform3D]." msgstr "La variable es de tipo [Transform3D]." msgid "Variable is of type [Projection]." msgstr "La variable es de tipo [Projection]." msgid "Variable is of type [Color]." msgstr "La variable es de tipo [Color]." msgid "Variable is of type [StringName]." msgstr "La variable es de tipo [StringName]." msgid "Variable is of type [NodePath]." msgstr "La variable es de tipo [NodePath]." msgid "Variable is of type [RID]." msgstr "La variable es de tipo [RID]." msgid "Variable is of type [Object]." msgstr "La variable es de tipo [Object]." msgid "Variable is of type [Callable]." msgstr "La variable es de tipo [Callable]." msgid "Variable is of type [Signal]." msgstr "La variable es de tipo [Signal]." msgid "Variable is of type [Dictionary]." msgstr "La variable es de tipo [Dictionary]." msgid "Variable is of type [Array]." msgstr "La variable es de tipo [Array]." msgid "Variable is of type [PackedByteArray]." msgstr "La variable es de tipo [PackedByteArray]." msgid "Variable is of type [PackedInt32Array]." msgstr "La variable es de tipo [PackedInt32Array]." msgid "Variable is of type [PackedInt64Array]." msgstr "La variable es de tipo [PackedInt64Array]." msgid "Variable is of type [PackedFloat32Array]." msgstr "La variable es de tipo [PackedFloat32Array]." msgid "Variable is of type [PackedFloat64Array]." msgstr "La variable es de tipo [PackedFloat64Array]." msgid "Variable is of type [PackedStringArray]." msgstr "La variable es de tipo [PackedStringArray]." msgid "Variable is of type [PackedVector2Array]." msgstr "La variable es de tipo [PackedVector2Array]." msgid "Variable is of type [PackedVector3Array]." msgstr "La variable es de tipo [PackedVector3Array]." msgid "Variable is of type [PackedColorArray]." msgstr "La variable es de tipo [PackedColorArray]." msgid "Variable is of type [PackedVector4Array]." msgstr "La variable es de tipo [PackedVector2Array]." msgid "Represents the size of the [enum Variant.Type] enum." msgstr "Representa el tamaño del enum [enum Variant.Type]." msgid "Equality operator ([code]==[/code])." msgstr "Operador de igualdad ([code]==[/code])." msgid "Inequality operator ([code]!=[/code])." msgstr "Operador desigualdad ([code]!=[/code])." msgid "Less than operator ([code]<[/code])." msgstr "Operador menor que ([code]<[/code])." msgid "Less than or equal operator ([code]<=[/code])." msgstr "Operador menor o igual que ([code]<=[/code])." msgid "Greater than operator ([code]>[/code])." msgstr "Operador mayor que ([code]>[/code])." msgid "Greater than or equal operator ([code]>=[/code])." msgstr "Operador igual o mayor que ([code]>=[/code])." msgid "Addition operator ([code]+[/code])." msgstr "Operador suma ([code]+[/code])." msgid "Subtraction operator ([code]-[/code])." msgstr "Operador resta ([code]-[/code])." msgid "Multiplication operator ([code]*[/code])." msgstr "Operador multiplicación ([code]*[/code])." msgid "Division operator ([code]/[/code])." msgstr "Operador división ([code]/[/code])." msgid "Unary negation operator ([code]-[/code])." msgstr "Operador unario de negación ([code]-[/code]." msgid "Unary plus operator ([code]+[/code])." msgstr "Operador unario de suma ([code]+[/code])." msgid "Remainder/modulo operator ([code]%[/code])." msgstr "Operador modulo/resto ([code]%[/code])." msgid "Power operator ([code]**[/code])." msgstr "Operador de exponenciación ([code]**[/code])." msgid "Left shift operator ([code]<<[/code])." msgstr "Operador de desplazamiento binario izquierdo ([code]<<[/code])." msgid "Right shift operator ([code]>>[/code])." msgstr "Operador de desplazamiento binario derecho ([code]>>[/code])." msgid "Bitwise AND operator ([code]&[/code])." msgstr "Operador binario AND ([code]&[/code])." msgid "Bitwise OR operator ([code]|[/code])." msgstr "Operador binario OR ([code]|[/code])." msgid "Bitwise XOR operator ([code]^[/code])." msgstr "Operador binario XOR ([code]^[/code])." msgid "Bitwise NOT operator ([code]~[/code])." msgstr "Operador binario NOT ([code]~[/code])." msgid "Logical AND operator ([code]and[/code] or [code]&&[/code])." msgstr "Operador AND lógico ([code]and[/code] o [code]&&[/code])." msgid "Logical OR operator ([code]or[/code] or [code]||[/code])." msgstr "Operador OR lógico ([code]or[/code] o [code]||[/code])." msgid "Logical XOR operator (not implemented in GDScript)." msgstr "Operador XOR lógico ( no implementado en GDScript)." msgid "Logical NOT operator ([code]not[/code] or [code]![/code])." msgstr "Operador NOT lógico ([code]NOT[/code] o [code]![/code])." msgid "Logical IN operator ([code]in[/code])." msgstr "Operador lógico In ([code]in[/code])." msgid "Represents the size of the [enum Variant.Operator] enum." msgstr "Representa el tamaño del enum [enum Variant.Operator]." msgid "A 3D axis-aligned bounding box." msgstr "Un cuadro delimitador 3D alineado con los ejes." msgid "" "The [AABB] built-in [Variant] type represents an axis-aligned bounding box in " "a 3D space. It is defined by its [member position] and [member size], which " "are [Vector3]. It is frequently used for fast overlap tests (see [method " "intersects]). Although [AABB] itself is axis-aligned, it can be combined with " "[Transform3D] to represent a rotated or skewed bounding box.\n" "It uses floating-point coordinates. The 2D counterpart to [AABB] is [Rect2]. " "There is no version of [AABB] that uses integer coordinates.\n" "[b]Note:[/b] Negative values for [member size] are not supported. With " "negative size, most [AABB] methods do not work correctly. Use [method abs] to " "get an equivalent [AABB] with a non-negative size.\n" "[b]Note:[/b] In a boolean context, an [AABB] evaluates to [code]false[/code] " "if both [member position] and [member size] are zero (equal to [constant " "Vector3.ZERO]). Otherwise, it always evaluates to [code]true[/code]." msgstr "" "El tipo [Variant] integrado [AABB] representa un cuadro delimitador alineado " "con el eje en un espacio 3D. Se define por su [member position] y [member " "size], que son [Vector3]. Se utiliza con frecuencia para pruebas rápidas de " "superposición (véase [method intersects]). Aunque [AABB] está alineado con el " "eje, puede combinarse con [Transform3D] para representar un cuadro " "delimitador rotado o sesgado.\n" "Utiliza coordenadas de punto flotante. La contraparte 2D de [AABB] es " "[Rect2]. No existe ninguna versión de [AABB] que utilice coordenadas " "enteras.\n" "[b]Nota:[/b] No se admiten valores negativos para [member size]. Con un " "tamaño negativo, la mayoría de los métodos [AABB] no funcionan correctamente. " "Utiliza [method abs] para obtener un [AABB] equivalente con un tamaño no " "negativo.\n" "[b]Nota:[/b] En un contexto booleano, una [AABB] se evalúa como [code]false[/" "code] si tanto la [member position] como [member size] son cero (igual a " "[constant Vector3.ZERO]). De lo contrario, siempre se evalúa como [code]true[/" "code]." msgid "Math documentation index" msgstr "Índice de documentación matemática" msgid "Vector math" msgstr "Matemáticas vectoriales" msgid "Advanced vector math" msgstr "Matemática vectorial avanzada" msgid "" "Constructs an [AABB] with its [member position] and [member size] set to " "[constant Vector3.ZERO]." msgstr "" "Construye un [AABB] con su [member position] y [member size] establecidos a " "[constant Vector3.ZERO]." msgid "Constructs an [AABB] as a copy of the given [AABB]." msgstr "Construye un [AABB] como una copia del [AABB] dado." msgid "Constructs an [AABB] by [param position] and [param size]." msgstr "Construye un [AABB] con [param position] y [param size]." msgid "" "Returns an [AABB] equivalent to this bounding box, with its width, height, " "and depth modified to be non-negative values.\n" "[codeblocks]\n" "[gdscript]\n" "var box = AABB(Vector3(5, 0, 5), Vector3(-20, -10, -5))\n" "var absolute = box.abs()\n" "print(absolute.position) # Prints (-15.0, -10.0, 0.0)\n" "print(absolute.size) # Prints (20.0, 10.0, 5.0)\n" "[/gdscript]\n" "[csharp]\n" "var box = new Aabb(new Vector3(5, 0, 5), new Vector3(-20, -10, -5));\n" "var absolute = box.Abs();\n" "GD.Print(absolute.Position); // Prints (-15, -10, 0)\n" "GD.Print(absolute.Size); // Prints (20, 10, 5)\n" "[/csharp]\n" "[/codeblocks]\n" "[b]Note:[/b] It's recommended to use this method when [member size] is " "negative, as most other methods in Godot assume that the [member size]'s " "components are greater than [code]0[/code]." msgstr "" "Devuelve un [AABB] equivalente a este cuadro delimitador, con su ancho, alto " "y profundidad modificados para ser valores no negativos.\n" "[codeblocks]\n" "[gdscript]\n" "var box = AABB(Vector3(5, 0, 5), Vector3(-20, -10, -5))\n" "var absolute = box.abs()\n" "print(absolute.position) # Imprime (-15.0, -10.0, 0.0)\n" "print(absolute.size) # Imprime (20.0, 10.0, 5.0)\n" "[/gdscript]\n" "[csharp]\n" "var box = new Aabb(new Vector3(5, 0, 5), new Vector3(-20, -10, -5));\n" "var absolute = box.Abs();\n" "GD.Print(absolute.Position); // Imprime (-15, -10, 0)\n" "GD.Print(absolute.Size); // Imprime (20, 10, 5)\n" "[/csharp]\n" "[/codeblocks]\n" "[b]Nota:[/b] Se recomienda utilizar este método cuando [member size] es " "negativo, ya que la mayoría de los otros métodos en Godot asumen que los " "componentes de [member size] son mayores que [code]0[/code]." msgid "" "Returns [code]true[/code] if this bounding box [i]completely[/i] encloses the " "[param with] box. The edges of both boxes are included.\n" "[codeblocks]\n" "[gdscript]\n" "var a = AABB(Vector3(0, 0, 0), Vector3(4, 4, 4))\n" "var b = AABB(Vector3(1, 1, 1), Vector3(3, 3, 3))\n" "var c = AABB(Vector3(2, 2, 2), Vector3(8, 8, 8))\n" "\n" "print(a.encloses(a)) # Prints true\n" "print(a.encloses(b)) # Prints true\n" "print(a.encloses(c)) # Prints false\n" "[/gdscript]\n" "[csharp]\n" "var a = new Aabb(new Vector3(0, 0, 0), new Vector3(4, 4, 4));\n" "var b = new Aabb(new Vector3(1, 1, 1), new Vector3(3, 3, 3));\n" "var c = new Aabb(new Vector3(2, 2, 2), new Vector3(8, 8, 8));\n" "\n" "GD.Print(a.Encloses(a)); // Prints True\n" "GD.Print(a.Encloses(b)); // Prints True\n" "GD.Print(a.Encloses(c)); // Prints False\n" "[/csharp]\n" "[/codeblocks]" msgstr "" "Devuelve [code]true[/code] si este cuadro delimitador encierra " "[i]completamente[/i] la caja [param with]. Se incluyen los bordes de ambas " "cajas.\n" "[codeblocks]\n" "[gdscript]\n" "var a = AABB(Vector3(0, 0, 0), Vector3(4, 4, 4))\n" "var b = AABB(Vector3(1, 1, 1), Vector3(3, 3, 3))\n" "var c = AABB(Vector3(2, 2, 2), Vector3(8, 8, 8))\n" "\n" "print(a.encloses(a)) # Imprime true\n" "print(a.encloses(b)) # Imprime true\n" "print(a.encloses(c)) # Imprime false\n" "[/gdscript]\n" "[csharp]\n" "var a = new Aabb(new Vector3(0, 0, 0), new Vector3(4, 4, 4));\n" "var b = new Aabb(new Vector3(1, 1, 1), new Vector3(3, 3, 3));\n" "var c = new Aabb(new Vector3(2, 2, 2), new Vector3(8, 8, 8));\n" "\n" "GD.Print(a.Encloses(a)); // Imprime True\n" "GD.Print(a.Encloses(b)); // Imprime True\n" "GD.Print(a.Encloses(c)); // Imprime False\n" "[/csharp]\n" "[/codeblocks]" msgid "" "Returns a copy of this bounding box expanded to align the edges with the " "given [param to_point], if necessary.\n" "[codeblocks]\n" "[gdscript]\n" "var box = AABB(Vector3(0, 0, 0), Vector3(5, 2, 5))\n" "\n" "box = box.expand(Vector3(10, 0, 0))\n" "print(box.position) # Prints (0.0, 0.0, 0.0)\n" "print(box.size) # Prints (10.0, 2.0, 5.0)\n" "\n" "box = box.expand(Vector3(-5, 0, 5))\n" "print(box.position) # Prints (-5.0, 0.0, 0.0)\n" "print(box.size) # Prints (15.0, 2.0, 5.0)\n" "[/gdscript]\n" "[csharp]\n" "var box = new Aabb(new Vector3(0, 0, 0), new Vector3(5, 2, 5));\n" "\n" "box = box.Expand(new Vector3(10, 0, 0));\n" "GD.Print(box.Position); // Prints (0, 0, 0)\n" "GD.Print(box.Size); // Prints (10, 2, 5)\n" "\n" "box = box.Expand(new Vector3(-5, 0, 5));\n" "GD.Print(box.Position); // Prints (-5, 0, 0)\n" "GD.Print(box.Size); // Prints (15, 2, 5)\n" "[/csharp]\n" "[/codeblocks]" msgstr "" "Devuelve una copia de este cuadro delimitador expandida para alinear los " "bordes con el [param to_point] dado, si es necesario.\n" "[codeblocks]\n" "[gdscript]\n" "var box = AABB(Vector3(0, 0, 0), Vector3(5, 2, 5))\n" "\n" "box = box.expand(Vector3(10, 0, 0))\n" "print(box.position) # Imprime (0.0, 0.0, 0.0)\n" "print(box.size) # Imprime (10.0, 2.0, 5.0)\n" "\n" "box = box.expand(Vector3(-5, 0, 5))\n" "print(box.position) # Imprime (-5.0, 0.0, 0.0)\n" "print(box.size) # Imprime (15.0, 2.0, 5.0)\n" "[/gdscript]\n" "[csharp]\n" "var box = new Aabb(new Vector3(0, 0, 0), new Vector3(5, 2, 5));\n" "\n" "box = box.Expand(new Vector3(10, 0, 0));\n" "GD.Print(box.Position); // Imprime (0, 0, 0)\n" "GD.Print(box.Size); // Imprime (10, 2, 5)\n" "\n" "box = box.Expand(new Vector3(-5, 0, 5));\n" "GD.Print(box.Position); // Imprime (-5, 0, 0)\n" "GD.Print(box.Size); // Imprime (15, 2, 5)\n" "[/csharp]\n" "[/codeblocks]" msgid "" "Returns the center point of the bounding box. This is the same as " "[code]position + (size / 2.0)[/code]." msgstr "" "Devuelve el punto central del cuadro delimitador. Esto es lo mismo que " "[code]position + (size / 2.0)[/code]." msgid "" "Returns the position of one of the 8 vertices that compose this bounding box. " "With an [param idx] of [code]0[/code] this is the same as [member position], " "and an [param idx] of [code]7[/code] is the same as [member end]." msgstr "" "Devuelve la posición de uno de los 8 vértices que componen este cuadro " "delimitador. Con un [param idx] de [code]0[/code] esto es lo mismo que " "[member position], y un [param idx] de [code]7[/code] es lo mismo que [member " "end]." msgid "" "Returns the longest normalized axis of this bounding box's [member size], as " "a [Vector3] ([constant Vector3.RIGHT], [constant Vector3.UP], or [constant " "Vector3.BACK]).\n" "[codeblocks]\n" "[gdscript]\n" "var box = AABB(Vector3(0, 0, 0), Vector3(2, 4, 8))\n" "\n" "print(box.get_longest_axis()) # Prints (0.0, 0.0, 1.0)\n" "print(box.get_longest_axis_index()) # Prints 2\n" "print(box.get_longest_axis_size()) # Prints 8.0\n" "[/gdscript]\n" "[csharp]\n" "var box = new Aabb(new Vector3(0, 0, 0), new Vector3(2, 4, 8));\n" "\n" "GD.Print(box.GetLongestAxis()); // Prints (0, 0, 1)\n" "GD.Print(box.GetLongestAxisIndex()); // Prints Z\n" "GD.Print(box.GetLongestAxisSize()); // Prints 8\n" "[/csharp]\n" "[/codeblocks]\n" "See also [method get_longest_axis_index] and [method get_longest_axis_size]." msgstr "" "Devuelve el eje normalizado más largo del [member size] de este cuadro " "delimitador, como un [Vector3] ([constant Vector3.RIGHT], [constant " "Vector3.UP] o [constant Vector3.BACK]).\n" "[codeblocks]\n" "[gdscript]\n" "var box = AABB(Vector3(0, 0, 0), Vector3(2, 4, 8))\n" "\n" "print(box.get_longest_axis()) # Imprime (0.0, 0.0, 1.0)\n" "print(box.get_longest_axis_index()) # Imprime 2\n" "print(box.get_longest_axis_size()) # Imprime 8.0\n" "[/gdscript]\n" "[csharp]\n" "var box = new Aabb(new Vector3(0, 0, 0), new Vector3(2, 4, 8));\n" "\n" "GD.Print(box.GetLongestAxis()); // Imprime (0, 0, 1)\n" "GD.Print(box.GetLongestAxisIndex()); // Imprime Z\n" "GD.Print(box.GetLongestAxisSize()); // Imprime 8\n" "[/csharp]\n" "[/codeblocks]\n" "Véase también [method get_longest_axis_index] y [method " "get_longest_axis_size]." msgid "" "Returns the index to the longest axis of this bounding box's [member size] " "(see [constant Vector3.AXIS_X], [constant Vector3.AXIS_Y], and [constant " "Vector3.AXIS_Z]).\n" "For an example, see [method get_longest_axis]." msgstr "" "Devuelve el índice del eje más largo del [member size] de este cuadro " "delimitador (ver [constant Vector3.AXIS_X], [constant Vector3.AXIS_Y] y " "[constant Vector3.AXIS_Z]).\n" "Para ver un ejemplo, véase [method get_longest_axis]." msgid "" "Returns the longest dimension of this bounding box's [member size].\n" "For an example, see [method get_longest_axis]." msgstr "" "Devuelve la dimensión más larga del [member size] de este cuadro " "delimitador.\n" "Para un ejemplo, véase [method get_longest_axis]." msgid "" "Returns the shortest normalized axis of this bounding box's [member size], as " "a [Vector3] ([constant Vector3.RIGHT], [constant Vector3.UP], or [constant " "Vector3.BACK]).\n" "[codeblocks]\n" "[gdscript]\n" "var box = AABB(Vector3(0, 0, 0), Vector3(2, 4, 8))\n" "\n" "print(box.get_shortest_axis()) # Prints (1.0, 0.0, 0.0)\n" "print(box.get_shortest_axis_index()) # Prints 0\n" "print(box.get_shortest_axis_size()) # Prints 2.0\n" "[/gdscript]\n" "[csharp]\n" "var box = new Aabb(new Vector3(0, 0, 0), new Vector3(2, 4, 8));\n" "\n" "GD.Print(box.GetShortestAxis()); // Prints (1, 0, 0)\n" "GD.Print(box.GetShortestAxisIndex()); // Prints X\n" "GD.Print(box.GetShortestAxisSize()); // Prints 2\n" "[/csharp]\n" "[/codeblocks]\n" "See also [method get_shortest_axis_index] and [method get_shortest_axis_size]." msgstr "" "Devuelve el eje normalizado más corto del [member size] de este cuadro " "delimitador, como un [Vector3] ([constant Vector3.RIGHT], [constant " "Vector3.UP] o [constant Vector3.BACK]).\n" "[codeblocks]\n" "[gdscript]\n" "var box = AABB(Vector3(0, 0, 0), Vector3(2, 4, 8))\n" "\n" "print(box.get_shortest_axis()) # Imprime (1.0, 0.0, 0.0)\n" "print(box.get_shortest_axis_index()) # Imprime 0\n" "print(box.get_shortest_axis_size()) # Imprime 2.0\n" "[/gdscript]\n" "[csharp]\n" "var box = new Aabb(new Vector3(0, 0, 0), new Vector3(2, 4, 8));\n" "\n" "GD.Print(box.GetShortestAxis()); // Imprime (1, 0, 0)\n" "GD.Print(box.GetShortestAxisIndex()); // Imprime X\n" "GD.Print(box.GetShortestAxisSize()); // Imprime 2\n" "[/csharp]\n" "[/codeblocks]\n" "Véase también [method get_shortest_axis_index] y [method " "get_shortest_axis_size]." msgid "" "Returns the index to the shortest axis of this bounding box's [member size] " "(see [constant Vector3.AXIS_X], [constant Vector3.AXIS_Y], and [constant " "Vector3.AXIS_Z]).\n" "For an example, see [method get_shortest_axis]." msgstr "" "Devuelve el índice del eje más corto del [member size] de este cuadro " "delimitador (ver [constant Vector3.AXIS_X], [constant Vector3.AXIS_Y] y " "[constant Vector3.AXIS_Z]).\n" "Para ver un ejemplo, véase [method get_shortest_axis]." msgid "" "Returns the shortest dimension of this bounding box's [member size].\n" "For an example, see [method get_shortest_axis]." msgstr "" "Devuelve la dimensión más corta del [member size] de este cuadro " "delimitador.\n" "Para un ejemplo, véase [method get_shortest_axis]." msgid "" "Returns the vertex's position of this bounding box that's the farthest in the " "given direction. This point is commonly known as the support point in " "collision detection algorithms." msgstr "" "Devuelve la posición del vértice de este cuadro delimitador que está más " "lejos en la dirección dada. Este punto se conoce comúnmente como el punto de " "soporte en los algoritmos de detección de colisiones." msgid "" "Returns the bounding box's volume. This is equivalent to [code]size.x * " "size.y * size.z[/code]. See also [method has_volume]." msgstr "" "Devuelve el volumen del cuadro delimitador. Esto es equivalente a " "[code]size.x * size.y * size.z[/code]. Véase también [method has_volume]." msgid "" "Returns a copy of this bounding box extended on all sides by the given amount " "[param by]. A negative amount shrinks the box instead.\n" "[codeblocks]\n" "[gdscript]\n" "var a = AABB(Vector3(4, 4, 4), Vector3(8, 8, 8)).grow(4)\n" "print(a.position) # Prints (0.0, 0.0, 0.0)\n" "print(a.size) # Prints (16.0, 16.0, 16.0)\n" "\n" "var b = AABB(Vector3(0, 0, 0), Vector3(8, 4, 2)).grow(2)\n" "print(b.position) # Prints (-2.0, -2.0, -2.0)\n" "print(b.size) # Prints (12.0, 8.0, 6.0)\n" "[/gdscript]\n" "[csharp]\n" "var a = new Aabb(new Vector3(4, 4, 4), new Vector3(8, 8, 8)).Grow(4);\n" "GD.Print(a.Position); // Prints (0, 0, 0)\n" "GD.Print(a.Size); // Prints (16, 16, 16)\n" "\n" "var b = new Aabb(new Vector3(0, 0, 0), new Vector3(8, 4, 2)).Grow(2);\n" "GD.Print(b.Position); // Prints (-2, -2, -2)\n" "GD.Print(b.Size); // Prints (12, 8, 6)\n" "[/csharp]\n" "[/codeblocks]" msgstr "" "Devuelve una copia de esta caja delimitadora extendida en todos sus lados por " "la cantidad dada [param by]. Una cantidad negativa, en cambio, encoge la " "caja.\n" "[codeblocks]\n" "[gdscript]\n" "var a = AABB(Vector3(4, 4, 4), Vector3(8, 8, 8)).grow(4)\n" "print(a.position) # Imprime (0.0, 0.0, 0.0)\n" "print(a.size) # Imprime (16.0, 16.0, 16.0)\n" "\n" "var b = AABB(Vector3(0, 0, 0), Vector3(8, 4, 2)).grow(2)\n" "print(b.position) # Imprime (-2.0, -2.0, -2.0)\n" "print(b.size) # Imprime (12.0, 8.0, 6.0)\n" "[/gdscript]\n" "[csharp]\n" "var a = new Aabb(new Vector3(4, 4, 4), new Vector3(8, 8, 8)).Grow(4);\n" "GD.Print(a.Position); // Imprime (0, 0, 0)\n" "GD.Print(a.Size); // Imprime (16, 16, 16)\n" "\n" "var b = new Aabb(new Vector3(0, 0, 0), new Vector3(8, 4, 2)).Grow(2);\n" "GD.Print(b.Position); // Imprime (-2, -2, -2)\n" "GD.Print(b.Size); // Imprime (12, 8, 6)\n" "[/csharp]\n" "[/codeblocks]" msgid "" "Returns [code]true[/code] if the bounding box contains the given [param " "point]. By convention, points exactly on the right, top, and front sides are " "[b]not[/b] included.\n" "[b]Note:[/b] This method is not reliable for [AABB] with a [i]negative[/i] " "[member size]. Use [method abs] first to get a valid bounding box." msgstr "" "Devuelve [code]true[/code] si el cuadro delimitador contiene el [param point] " "dado. Por convención, los puntos exactamente en los lados derecho, superior y " "frontal [b]no[/b] se incluyen.\n" "[b]Nota:[/b] Este método no es fiable para [AABB] con un [member size] " "[i]negativo[/i]. Utiliza [method abs] primero para obtener un cuadro " "delimitador válido." msgid "" "Returns [code]true[/code] if this bounding box has a surface or a length, " "that is, at least one component of [member size] is greater than [code]0[/" "code]. Otherwise, returns [code]false[/code]." msgstr "" "Devuelve [code]true[/code] si este cuadro delimitador tiene una superficie o " "una longitud, es decir, al menos un componente de [member size] es mayor que " "[code]0[/code]. De lo contrario, devuelve [code]false[/code]." msgid "" "Returns [code]true[/code] if this bounding box's width, height, and depth are " "all positive. See also [method get_volume]." msgstr "" "Devuelve [code]true[/code] si el ancho, la altura y la profundidad de este " "cuadro delimitador son todos positivos. Véase también [method get_volume]." msgid "" "Returns the intersection between this bounding box and [param with]. If the " "boxes do not intersect, returns an empty [AABB]. If the boxes intersect at " "the edge, returns a flat [AABB] with no volume (see [method has_surface] and " "[method has_volume]).\n" "[codeblocks]\n" "[gdscript]\n" "var box1 = AABB(Vector3(0, 0, 0), Vector3(5, 2, 8))\n" "var box2 = AABB(Vector3(2, 0, 2), Vector3(8, 4, 4))\n" "\n" "var intersection = box1.intersection(box2)\n" "print(intersection.position) # Prints (2.0, 0.0, 2.0)\n" "print(intersection.size) # Prints (3.0, 2.0, 4.0)\n" "[/gdscript]\n" "[csharp]\n" "var box1 = new Aabb(new Vector3(0, 0, 0), new Vector3(5, 2, 8));\n" "var box2 = new Aabb(new Vector3(2, 0, 2), new Vector3(8, 4, 4));\n" "\n" "var intersection = box1.Intersection(box2);\n" "GD.Print(intersection.Position); // Prints (2, 0, 2)\n" "GD.Print(intersection.Size); // Prints (3, 2, 4)\n" "[/csharp]\n" "[/codeblocks]\n" "[b]Note:[/b] If you only need to know whether two bounding boxes are " "intersecting, use [method intersects], instead." msgstr "" "Devuelve la intersección entre este cuadro delimitador y [param with]. Si los " "cuadros no se intersecan, devuelve un [AABB] vacío. Si los cuadros se " "intersecan en el borde, devuelve un [AABB] plano sin volumen (véase [method " "has_surface] y [method has_volume]).\n" "[codeblocks]\n" "[gdscript]\n" "var box1 = AABB(Vector3(0, 0, 0), Vector3(5, 2, 8))\n" "var box2 = AABB(Vector3(2, 0, 2), Vector3(8, 4, 4))\n" "\n" "var intersection = box1.intersection(box2)\n" "print(intersection.position) # Imprime (2.0, 0.0, 2.0)\n" "print(intersection.size) # Imprime (3.0, 2.0, 4.0)\n" "[/gdscript]\n" "[csharp]\n" "var box1 = new Aabb(new Vector3(0, 0, 0), new Vector3(5, 2, 8));\n" "var box2 = new Aabb(new Vector3(2, 0, 2), new Vector3(8, 4, 4));\n" "\n" "var intersection = box1.Intersection(box2);\n" "GD.Print(intersection.Position); // Imprime (2, 0, 2)\n" "GD.Print(intersection.Size); // Imprime (3, 2, 4)\n" "[/csharp]\n" "[/codeblocks]\n" "[b]Nota:[/b] Si solo necesita saber si dos cuadros delimitadores se están " "intersecando, use [method intersects] en su lugar." msgid "" "Returns [code]true[/code] if this bounding box overlaps with the box [param " "with]. The edges of both boxes are [i]always[/i] excluded." msgstr "" "Devuelve [code]true[/code] si este cuadro delimitador se superpone con el " "cuadro [param with]. Los bordes de ambas cajas están [i]siempre[/i] excluidos." msgid "" "Returns [code]true[/code] if this bounding box is on both sides of the given " "[param plane]." msgstr "" "Devuelve [code]true[/code] si este cuadro delimitador está en ambos lados del " "[param plane] dado." msgid "" "Returns the first point where this bounding box and the given ray intersect, " "as a [Vector3]. If no intersection occurs, returns [code]null[/code].\n" "The ray begin at [param from], faces [param dir] and extends towards infinity." msgstr "" "Devuelve el primer punto donde este cuadro delimitador y el rayo dado se " "intersecan, como un [Vector3]. Si no se produce ninguna intersección, " "devuelve [code]null[/code].\n" "El rayo comienza en [param from], apunta hacia [param dir] y se extiende " "hacia el infinito." msgid "" "Returns the first point where this bounding box and the given segment " "intersect, as a [Vector3]. If no intersection occurs, returns [code]null[/" "code].\n" "The segment begins at [param from] and ends at [param to]." msgstr "" "Devuelve el primer punto donde este cuadro delimitador y el segmento dado se " "intersecan, como un [Vector3]. Si no se produce ninguna intersección, " "devuelve [code]null[/code].\n" "El segmento comienza en [param from] y termina en [param to]." msgid "" "Returns [code]true[/code] if this bounding box and [param aabb] are " "approximately equal, by calling [method Vector3.is_equal_approx] on the " "[member position] and the [member size]." msgstr "" "Devuelve [code]true[/code] si este cuadro delimitador y [param aabb] son " "aproximadamente iguales, llamando a [method Vector3.is_equal_approx] en " "[member position] y [member size]." msgid "" "Returns [code]true[/code] if this bounding box's values are finite, by " "calling [method Vector3.is_finite] on the [member position] and the [member " "size]." msgstr "" "Devuelve [code]true[/code] si los valores de este cuadro delimitador son " "finitos, llamando a [method Vector3.is_finite] en el [member position] y el " "[member size]." msgid "" "Returns an [AABB] that encloses both this bounding box and [param with] " "around the edges. See also [method encloses]." msgstr "" "Devuelve un [AABB] que engloba tanto este cuadro delimitador como [param " "with] alrededor de los bordes. Véase también [method encloses]." msgid "" "The ending point. This is usually the corner on the top-right and back of the " "bounding box, and is equivalent to [code]position + size[/code]. Setting this " "point affects the [member size]." msgstr "" "El punto final. Normalmente es la esquina en la parte superior derecha y " "posterior del cuadro delimitador, y es equivalente a [code]position + size[/" "code]. Establecer este punto afecta al [member size]." msgid "" "The origin point. This is usually the corner on the bottom-left and forward " "of the bounding box." msgstr "" "El punto de origen. Normalmente es la esquina en la parte inferior izquierda " "y frontal del cuadro delimitador." msgid "" "The bounding box's width, height, and depth starting from [member position]. " "Setting this value also affects the [member end] point.\n" "[b]Note:[/b] It's recommended setting the width, height, and depth to non-" "negative values. This is because most methods in Godot assume that the " "[member position] is the bottom-left-forward corner, and the [member end] is " "the top-right-back corner. To get an equivalent bounding box with non-" "negative size, use [method abs]." msgstr "" "El ancho, la altura y la profundidad del cuadro delimitador, a partir de " "[member position]. Establecer este valor también afecta al punto [member " "end].\n" "[b]Nota:[/b] Se recomienda establecer el ancho, la altura y la profundidad a " "valores no negativos. Esto se debe a que la mayoría de los métodos en Godot " "asumen que la [member position] es la esquina inferior izquierda delantera, y " "el [member end] es la esquina superior derecha trasera. Para obtener un " "cuadro delimitador equivalente con un tamaño no negativo, usa [method abs]." msgid "" "Returns [code]true[/code] if the [member position] or [member size] of both " "bounding boxes are not equal.\n" "[b]Note:[/b] Due to floating-point precision errors, consider using [method " "is_equal_approx] instead, which is more reliable." msgstr "" "Devuelve [code]true[/code] si la [member position] o el [member size] de " "ambos cuadros delimitadores no son iguales.\n" "[b]Nota:[/b] Debido a los errores de precisión de punto flotante, considera " "usar [method is_equal_approx] en su lugar, que es más fiable." msgid "" "Inversely transforms (multiplies) the [AABB] by the given [Transform3D] " "transformation matrix, under the assumption that the transformation basis is " "orthonormal (i.e. rotation/reflection is fine, scaling/skew is not).\n" "[code]aabb * transform[/code] is equivalent to [code]transform.inverse() * " "aabb[/code]. See [method Transform3D.inverse].\n" "For transforming by inverse of an affine transformation (e.g. with scaling) " "[code]transform.affine_inverse() * aabb[/code] can be used instead. See " "[method Transform3D.affine_inverse]." msgstr "" "Transforma inversamente (multiplica) el [AABB] por la matriz de " "transformación [Transform3D] dada, bajo la suposición de que la base de " "transformación es ortonormal (es decir, la rotación/reflexión está bien, la " "escala/el sesgo no lo están).\n" "[code]aabb * transform[/code] es equivalente a [code]transform.inverse() * " "aabb[/code]. Véase [method Transform3D.inverse].\n" "Para transformar por la inversa de una transformación afín (por ejemplo, con " "escalado), se puede utilizar [code]transform.affine_inverse() * aabb[/code] " "en su lugar. Véase [method Transform3D.affine_inverse]." msgid "" "Returns [code]true[/code] if both [member position] and [member size] of the " "bounding boxes are exactly equal, respectively.\n" "[b]Note:[/b] Due to floating-point precision errors, consider using [method " "is_equal_approx] instead, which is more reliable." msgstr "" "Devuelve [code]true[/code] si tanto la [member position] como el [member " "size] de los cuadros delimitadores son exactamente iguales, respectivamente.\n" "[b]Nota:[/b] Debido a los errores de precisión de punto flotante, considera " "usar [method is_equal_approx] en su lugar, que es más fiable." msgid "A base dialog used for user notification." msgstr "Un diálogo base utilizado para la notificación al usuario." msgid "" "The default use of [AcceptDialog] is to allow it to only be accepted or " "closed, with the same result. However, the [signal confirmed] and [signal " "canceled] signals allow to make the two actions different, and the [method " "add_button] method allows to add custom buttons and actions.\n" "[b]Note:[/b] [AcceptDialog] is invisible by default. To make it visible, call " "one of the [code]popup_*[/code] methods from [Window] on the node, such as " "[method Window.popup_centered_clamped]." msgstr "" "El uso predeterminado de [AcceptDialog] es permitir que solo se acepte o se " "cierre, con el mismo resultado. Sin embargo, las señales [signal confirmed] y " "[signal canceled] permiten diferenciar ambas acciones, y el método [method " "add_button] permite agregar botones y acciones personalizadas.\n" "[b]Nota:[/b] [AcceptDialog] es invisible por defecto. Para hacerlo visible, " "llama a uno de los métodos [code]popup_*[/code] de [Window] en el nodo, como " "[method Window.popup_centered_clamped]." msgid "" "Adds a button with label [param text] and a custom [param action] to the " "dialog and returns the created button.\n" "If [param action] is not empty, pressing the button will emit the [signal " "custom_action] signal with the specified action string.\n" "If [code]true[/code], [param right] will place the button to the right of any " "sibling buttons.\n" "You can use [method remove_button] method to remove a button created with " "this method from the dialog." msgstr "" "Añade un botón con la etiqueta [param text] y una [param action] " "personalizada al diálogo y devuelve el botón creado.\n" "Si [param action] no está vacío, al pulsar el botón se emitirá la señal " "[signal custom_action] con la string de acción especificada.\n" "Si es [code]true[/code], [param right] colocará el botón a la derecha de " "cualquier botón hermano.\n" "Puede utilizar el método [method remove_button] para eliminar un botón creado " "con este método del diálogo." msgid "" "Adds a button with label [param name] and a cancel action to the dialog and " "returns the created button.\n" "You can use [method remove_button] method to remove a button created with " "this method from the dialog." msgstr "" "Añade un botón con la etiqueta [param name] y una acción de cancelación al " "diálogo y devuelve el botón creado.\n" "Puedes usar el método [method remove_button] para eliminar un botón creado " "con este método del diálogo." msgid "" "Returns the label used for built-in text.\n" "[b]Warning:[/b] This is a required internal node, removing and freeing it may " "cause a crash. If you wish to hide it or any of its children, use their " "[member CanvasItem.visible] property." msgstr "" "Devuelve la etiqueta utilizada para el texto integrado.\n" "[b]Advertencia:[/b] Este es un nodo interno requerido, eliminarlo o liberarlo " "puede causar un fallo. Si deseas ocultarlo o cualquiera de sus hijos, usa su " "propiedad [member CanvasItem.visible]." msgid "" "Returns the OK [Button] instance.\n" "[b]Warning:[/b] This is a required internal node, removing and freeing it may " "cause a crash. If you wish to hide it or any of its children, use their " "[member CanvasItem.visible] property." msgstr "" "Devuelve la instancia de el [Button] aceptar. \n" "[b]Warning:[/b] Esto es un nodo interno requerido, removerlo y liberarlo " "podría causar un crasheo. Si deseas esconder este o alguno de sus hijos, " "utiliza su propiedad [member CanvasItem.visible]." msgid "" "Registers a [LineEdit] in the dialog. When the enter key is pressed, the " "dialog will be accepted." msgstr "" "Registra un [LineEdit] en el diálogo. Cuando se pulsa la tecla intro, el " "diálogo se acepta." msgid "" "Removes the [param button] from the dialog. Does NOT free the [param button]. " "The [param button] must be a [Button] added with [method add_button] or " "[method add_cancel_button] method. After removal, pressing the [param button] " "will no longer emit this dialog's [signal custom_action] or [signal canceled] " "signals." msgstr "" "Elimina el [param button] del diálogo. NO libera el [param button]. El [param " "button] debe ser un [Button] añadido con el método [method add_button] o el " "método [method add_cancel_button]. Después de la eliminación, al pulsar el " "[param button] ya no se emitirán las señales [signal custom_action] o [signal " "canceled] de este diálogo." msgid "Sets autowrapping for the text in the dialog." msgstr "El texto se expande automáticamente en el diálogo." msgid "" "If [code]true[/code], the dialog will be hidden when the " "[code]ui_close_dialog[/code] action is pressed (by default, this action is " "bound to [kbd]Escape[/kbd], or [kbd]Cmd + W[/kbd] on macOS)." msgstr "" "Si es [code]true[/code], el diálogo se ocultará cuando se pulse la acción " "[code]ui_close_dialog[/code] (por defecto, esta acción está vinculada a " "[kbd]Escape[/kbd], o [kbd]Cmd + W[/kbd] en macOS)." msgid "" "If [code]true[/code], the dialog is hidden when the OK button is pressed. You " "can set it to [code]false[/code] if you want to do e.g. input validation when " "receiving the [signal confirmed] signal, and handle hiding the dialog in your " "own logic.\n" "[b]Note:[/b] Some nodes derived from this class can have a different default " "value, and potentially their own built-in logic overriding this setting. For " "example [FileDialog] defaults to [code]false[/code], and has its own input " "validation code that is called when you press OK, which eventually hides the " "dialog if the input is valid. As such, this property can't be used in " "[FileDialog] to disable hiding the dialog when pressing OK." msgstr "" "Si es [code]true[/code], el diálogo se oculta cuando se pulsa el botón OK. " "Puedes ajustarlo a [code]false[/code] si quieres hacer, por ejemplo, la " "validación de entrada al recibir la señal [signal confirmed], y manejar el " "ocultamiento del diálogo en tu propia lógica.\n" "[b]Nota:[/b] Algunos nodos derivados de esta clase pueden tener un valor por " "defecto diferente, y potencialmente su propia lógica incorporada anulando " "este ajuste. Por ejemplo, [FileDialog] tiene por defecto [code]false[/code], " "y tiene su propio código de validación de entrada que se llama al pulsar OK, " "que eventualmente oculta el diálogo si la entrada es válida. Como tal, esta " "propiedad no puede ser usada en [FileDialog] para deshabilitar la ocultación " "del diálogo cuando se presiona OK." msgid "The text displayed by the dialog." msgstr "El texto mostrado en el diálogo." msgid "" "The text displayed by the OK button (see [method get_ok_button]). If empty, a " "default text will be used." msgstr "" "El texto que muestra el botón Aceptar (véase [method get_ok_button]). Si está " "vacío, se utilizará un texto por defecto." msgid "" "Emitted when the dialog is closed or the button created with [method " "add_cancel_button] is pressed." msgstr "" "Emitida cuando se cierra el diálogo o se pulsa el botón creado con [method " "add_cancel_button]." msgid "Emitted when the dialog is accepted, i.e. the OK button is pressed." msgstr "Emitida cuando se acepta el diálogo, es decir, se pulsa el botón OK." msgid "" "Emitted when a custom button with an action is pressed. See [method " "add_button]." msgstr "" "Emitida cuando se pulsa un botón personalizado con una acción. Véase [method " "add_button]." msgid "" "The minimum height of each button in the bottom row (such as OK/Cancel) in " "pixels. This can be increased to make buttons with short texts easier to " "click/tap." msgstr "" "La altura mínima de cada botón en la fila inferior (como Aceptar/Cancelar) en " "píxeles. Esto se puede aumentar para facilitar hacer clic/tocar en botones " "con textos cortos." msgid "" "The minimum width of each button in the bottom row (such as OK/Cancel) in " "pixels. This can be increased to make buttons with short texts easier to " "click/tap." msgstr "" "El ancho mínimo de cada botón en la fila inferior (como Aceptar/Cancelar) en " "píxeles. Esto se puede aumentar para facilitar hacer clic/tocar en botones " "con textos cortos." msgid "" "The size of the vertical space between the dialog's content and the button " "row." msgstr "" "El tamaño del espacio vertical entre el contenido del diálogo y la fila de " "botones." msgid "The panel that fills the background of the window." msgstr "El panel que llena el fondo de la ventana." msgid "" "Creates a new, empty accessibility element resource.\n" "[b]Note:[/b] An accessibility element is created and freed automatically for " "each [Node]. In general, this function should not be called manually." msgstr "" "Crea un nuevo recurso de elemento de accesibilidad vacío.\n" "[b]Nota:[/b] Se crea y libera automáticamente un elemento de accesibilidad " "para cada [Node]. En general, esta función no debe ser llamada manualmente." msgid "Returns the metadata of the accessibility element [param id]." msgstr "Devuelve los metadatos del elemento de accesibilidad [param id]." msgid "" "Sets the metadata of the accessibility element [param id] to [param meta]." msgstr "" "Establece los metadatos del elemento de accesibilidad [param id] a [param " "meta]." msgid "Returns the main accessibility element of the OS native window." msgstr "" "Devuelve el elemento de accesibilidad principal de la ventana nativa del " "sistema operativo." msgid "" "Returns [code]true[/code] if [param id] is a valid accessibility element." msgstr "" "Devuelve [code]true[/code] si [param id] es un elemento de accesibilidad " "válido." msgid "" "Returns [code]true[/code] if screen reader is support by this implementation." msgstr "" "Devuelve [code]true[/code] si esta implementación admite el lector de " "pantalla." msgid "" "Sets the window focused state for assistive apps.\n" "[b]Note:[/b] This method is implemented on Linux, macOS, and Windows.\n" "[b]Note:[/b] Advanced users only! [Window] objects call this method " "automatically." msgstr "" "Establece el estado de foco de la ventana para aplicaciones de asistencia.\n" "[b]Nota:[/b] Este método está implementado en Linux, macOS y Windows.\n" "[b]Nota:[/b] ¡Solo para usuarios avanzados! Los objetos [Window] llaman a " "este método automáticamente." msgid "" "Sets window outer (with decorations) and inner (without decorations) bounds " "for assistive apps.\n" "[b]Note:[/b] This method is implemented on Linux, macOS, and Windows.\n" "[b]Note:[/b] Advanced users only! [Window] objects call this method " "automatically." msgstr "" "Establece los límites exteriores (con decoraciones) e interiores (sin " "decoraciones) de la ventana para aplicaciones de asistencia.\n" "[b]Nota:[/b] Este método está implementado en Linux, macOS y Windows.\n" "[b]Nota:[/b] ¡Solo para usuarios avanzados! Los objetos [Window] llaman a " "este método automáticamente." msgid "" "Adds a callback for the accessibility action (action which can be performed " "by using a special screen reader command or buttons on the Braille display), " "and marks this action as supported. The action callback receives one " "[Variant] argument, which value depends on action type." msgstr "" "Añade una devolución de llamada para la acción de accesibilidad (acción que " "se puede realizar usando un comando especial del lector de pantalla o botones " "en la pantalla Braille), y marca esta acción como compatible. La devolución " "de llamada de la acción recibe un argumento [Variant], cuyo valor depende del " "tipo de acción." msgid "" "Adds a child accessibility element.\n" "[b]Note:[/b] [Node] children and sub-elements are added to the child list " "automatically." msgstr "" "Añade un elemento de accesibilidad hijo.\n" "[b]Nota:[/b] Los hijos y subelementos de [Node] se añaden automáticamente a " "la lista de hijos." msgid "Adds an element that is controlled by this element." msgstr "Añade un elemento que es controlado por este elemento." msgid "Adds an element that describes this element." msgstr "Añade un elemento que describe este elemento." msgid "Adds an element that details this element." msgstr "Añade un elemento que detalla este elemento." msgid "Adds an element that this element flow into." msgstr "Agrega un elemento hacia el cual fluye este elemento." msgid "Adds an element that labels this element." msgstr "Añade un elemento que etiqueta este elemento." msgid "" "Adds an element that is part of the same radio group.\n" "[b]Note:[/b] This method should be called on each element of the group, using " "all other elements as [param related_id]." msgstr "" "Añade un elemento que forma parte del mismo grupo de radio.\n" "[b]Nota:[/b] Este método debe ser llamado en cada elemento del grupo, usando " "todos los demás elementos como [param related_id]." msgid "Adds an element that is an active descendant of this element." msgstr "Agrega un elemento que es un descendiente activo de este elemento." msgid "Sets element background color." msgstr "Establece el color de fondo del elemento." msgid "Sets element bounding box, relative to the node position." msgstr "" "Establece el cuadro delimitador del elemento, en relación con la posición del " "nodo." msgid "Sets element checked state." msgstr "Establece el estado del elemento marcado." msgid "Sets element class name." msgstr "Establece el nombre de la clase del elemento." msgid "Sets element color value." msgstr "Establece el valor del color del elemento." msgid "Sets element accessibility description." msgstr "Establece la descripción de accesibilidad del elemento." msgid "Sets an element which contains an error message for this element." msgstr "" "Establece un elemento que contiene un mensaje de error para este elemento." msgid "Sets element accessibility extra information added to the element name." msgstr "" "Establece información extra de accesibilidad del elemento, añadida al nombre " "del elemento." msgid "Sets element flag." msgstr "Establece la bandera del elemento." msgid "Sets currently focused element." msgstr "Establece el elemento enfocado actualmente." msgid "Sets element foreground color." msgstr "Establece el color de primer plano del elemento." msgid "Sets target element for the link." msgstr "Establece el elemento de destino para el enlace." msgid "Sets element text language." msgstr "Establece el idioma del texto del elemento." msgid "Sets number of items in the list." msgstr "Establece el número de elementos en la lista." msgid "Sets list/tree item expanded status." msgstr "Establece el estado de expandido de un elemento de lista/árbol." msgid "Sets the position of the element in the list." msgstr "Establece la posición del elemento en la lista." msgid "Sets the hierarchical level of the element in the list." msgstr "Establece el nivel jerárquico del elemento en la lista." msgid "Sets list/tree item selected status." msgstr "Establece el estado seleccionado del elemento de lista/árbol." msgid "Sets the orientation of the list elements." msgstr "Establece la orientación de los elementos de la lista." msgid "Sets the priority of the live region updates." msgstr "Establece la prioridad de las actualizaciones de la región en vivo." msgid "Sets the element to be a member of the group." msgstr "Establece el elemento para que sea miembro del grupo." msgid "Sets element accessibility name." msgstr "Establece el nombre de accesibilidad del elemento." msgid "Sets next element on the line." msgstr "Establece el siguiente elemento en la línea." msgid "Sets numeric value jump." msgstr "Establece el salto del valor numérico." msgid "Sets numeric value range." msgstr "Establece un rango de valores numéricos." msgid "Sets numeric value step." msgstr "Establece el paso del valor numérico." msgid "Sets numeric value." msgstr "Establece el valor numérico." msgid "Sets placeholder text." msgstr "Establece el texto de marcador de posición." msgid "Sets popup type for popup buttons." msgstr "Establece el tipo de popup para los botones emergentes." msgid "Sets previous element on the line." msgstr "Establece el elemento anterior en la línea." msgid "Sets element accessibility role." msgstr "Modifica el rol de accesibilidad del elemento." msgid "Sets element accessibility role description text." msgstr "" "Establece el texto de descripción del rol de accesibilidad del elemento." msgid "Sets scroll bar x position." msgstr "Establece la posición x de la barra de desplazamiento." msgid "Sets scroll bar x range." msgstr "Establece el rango X de la barra de desplazamiento." msgid "Sets scroll bar y position." msgstr "Establece la posición y de la barra de desplazamiento." msgid "Sets scroll bar y range." msgstr "Establece el rango Y de la barra de desplazamiento." msgid "Sets the list of keyboard shortcuts used by element." msgstr "Establece la lista de atajos de teclado utilizados por elemento." msgid "Sets human-readable description of the current checked state." msgstr "" "Establece una descripción legible por humanos del estado actual marcado." msgid "Sets cell position in the table." msgstr "Establece la posición de la celda en la tabla." msgid "Sets cell row/column span." msgstr "Establece el espacio entre filas y columnas de celdas." msgid "Sets number of columns in the table." msgstr "Establece el número de columnas en la tabla." msgid "Sets position of the column." msgstr "Establece la posición de la columna." msgid "Sets number of rows in the table." msgstr "Establece el número de filas en la tabla." msgid "Sets position of the row in the table." msgstr "Establece la posición de la fila en la tabla." msgid "Sets element text alignment." msgstr "Establece la alineación del texto del elemento." msgid "Sets text underline/overline/strikethrough." msgstr "Establece el subrayado/sobrelineado/tachado del texto." msgid "Sets text orientation." msgstr "Establece la orientación del texto." msgid "Sets tooltip text." msgstr "Establece el texto de la información sobre herramientas." msgid "Sets element 2D transform." msgstr "Establece la transformación 2D del elemento." msgid "Sets link URL." msgstr "Establece la URL del enlace." msgid "Sets element text value." msgstr "Establece el valor del texto del elemento." msgid "Unknown or custom role." msgstr "Rol desconocido o personalizado." msgid "Default dialog button element." msgstr "Elemento de botón de diálogo por defecto." msgid "Audio player element." msgstr "Elemento de reproductor de audio." msgid "Video player element." msgstr "Elemento de reproductor de vídeo." msgid "Non-editable text label." msgstr "Etiqueta de texto no editable." msgid "" "Container element. Elements with this role are used for internal structure " "and ignored by screen readers." msgstr "" "Elemento contenedor. Los elementos con este rol se utilizan para la " "estructura interna y son ignorados por los lectores de pantalla." msgid "Panel container element." msgstr "Elemento contenedor de panel." msgid "Button element." msgstr "Elemento de botón." msgid "Link element." msgstr "Elemento de enlace." msgid "Check box element." msgstr "Elemento de casilla de verificación." msgid "Radio button element." msgstr "Elemento de botón de opción." msgid "Check button element." msgstr "Elemento de botón de verificación." msgid "Scroll bar element." msgstr "Elemento de barra de desplazamiento." msgid "Scroll container element." msgstr "Elemento contenedor de desplazamiento." msgid "Container splitter handle element." msgstr "Elemento de manejador de divisor de contenedor." msgid "Slider element." msgstr "Elemento deslizador." msgid "Spin box element." msgstr "Elemento de cuadro de giro." msgid "Progress indicator element." msgstr "Elemento indicador de progreso." msgid "Editable text field element." msgstr "Elemento de campo de texto editable." msgid "Multiline editable text field element." msgstr "Elemento de campo de texto editable multilínea." msgid "Color picker element." msgstr "Elemento selector de color." msgid "Table element." msgstr "Elemento de tabla." msgid "Table/tree cell element." msgstr "Elemento de celda de tabla/árbol." msgid "Table/tree row element." msgstr "Elemento de fila de tabla/árbol." msgid "Table/tree row group element." msgstr "Elemento de grupo de filas de tabla/árbol." msgid "Table/tree row header element." msgstr "Elemento de encabezado de fila de tabla/árbol." msgid "Table/tree column header element." msgstr "Elemento de encabezado de columna de tabla/árbol." msgid "Tree view element." msgstr "Elemento de vista de árbol." msgid "Tree view item element." msgstr "Elemento de ítem de vista de árbol." msgid "List element." msgstr "Elemento de lista." msgid "List item element." msgstr "Elemento de ítem de lista." msgid "List view element." msgstr "Elemento de vista de lista." msgid "List view item element." msgstr "Elemento de ítem de vista de lista." msgid "Tab bar element." msgstr "Elemento de barra de pestañas." msgid "Tab bar item element." msgstr "Elemento de ítem de barra de pestañas." msgid "Tab panel element." msgstr "Elemento del panel de pestañas." msgid "Menu bar element." msgstr "Elemento de barra de menú." msgid "Popup menu element." msgstr "Elemento de menú emergente." msgid "Popup menu item element." msgstr "Elemento de menú emergente." msgid "Popup menu check button item element." msgstr "Elemento de ítem de botón de verificación de menú emergente." msgid "Popup menu radio button item element." msgstr "Elemento de ítem de botón de opción de menú emergente." msgid "Image element." msgstr "Elemento de Imágen." msgid "Window element." msgstr "Elemento de ventana." msgid "Embedded window title bar element." msgstr "Elemento de barra de título de ventana incrustado." msgid "Dialog window element." msgstr "Elemento de ventana de diálogo." msgid "Popup menu." msgstr "Menú de popup." msgid "Popup list." msgstr "Lista de popup." msgid "Popup tree view." msgstr "Vista de árbol de popup." msgid "Popup dialog." msgstr "Diálogo de popup." msgid "Element is hidden for accessibility tools." msgstr "El elemento está oculto para las herramientas de accesibilidad." msgid "Element require user input." msgstr "El elemento requiere la entrada del usuario." msgid "Element is a visited link." msgstr "El elemento es un enlace visitado." msgid "Element content is not ready (e.g. loading)." msgstr "El contenido del elemento no está listo (p. ej., cargando)." msgid "Element is modal window." msgstr "El elemento es una ventana modal." msgid "" "Element allows touches to be passed through when a screen reader is in touch " "exploration mode." msgstr "" "El elemento permite realizar toques cuando un lector de pantalla está en modo " "de exploración táctil." msgid "Element is text field with selectable but read-only text." msgstr "" "El elemento es un campo de texto con texto seleccionable pero de solo lectura." msgid "Element is disabled." msgstr "El elemento está deshabilitado." msgid "Element clips children." msgstr "El elemento recorta los hijos." msgid "Single click action, callback argument is not set." msgstr "Acción de clic único, el argumento de callback no está establecido." msgid "Focus action, callback argument is not set." msgstr "Acción de enfocar, el argumento de callback no está establecido." msgid "Blur action, callback argument is not set." msgstr "Acción de desenfocar, el argumento de callback no está establecido." msgid "Collapse action, callback argument is not set." msgstr "Acción de contraer, el argumento de callback no está establecido." msgid "Expand action, callback argument is not set." msgstr "Acción de expandir, el argumento de callback no está establecido." msgid "Decrement action, callback argument is not set." msgstr "Acción de decrementar, el argumento de callback no está establecido." msgid "Increment action, callback argument is not set." msgstr "Acción de incrementar, el argumento de callback no está establecido." msgid "Hide tooltip action, callback argument is not set." msgstr "" "Acción de ocultar tooltip, el argumento de callback no está establecido." msgid "Show tooltip action, callback argument is not set." msgstr "" "Acción de mostrar tooltip, el argumento de callback no está establecido." msgid "" "Replace text action, callback argument is set to [String] with the " "replacement text." msgstr "" "Acción de reemplazar texto, el argumento de callback se establece en [String] " "con el texto de reemplazo." msgid "Scroll backward action, callback argument is not set." msgstr "" "Acción de desplazamiento hacia atrás, el argumento de callback no está " "establecido." msgid "Scroll forward action, callback argument is not set." msgstr "" "Acción de desplazamiento hacia adelante, el argumento de callback no está " "establecido." msgid "" "Scroll to point action, callback argument is set to [Vector2] with the " "relative point coordinates." msgstr "" "Acción de desplazamiento a un punto, el argumento de callback se establece en " "[Vector2] con las coordenadas del punto relativo." msgid "" "Set scroll offset action, callback argument is set to [Vector2] with the " "scroll offset." msgstr "" "Acción de establecer el desplazamiento, el argumento de callback se establece " "en [Vector2] con el desplazamiento." msgid "Show context menu action, callback argument is not set." msgstr "" "Acción de mostrar menú contextual, el argumento de callback no está " "establecido." msgid "Indicates that updates to the live region should not be presented." msgstr "" "Indica que las actualizaciones de la región activa no deben presentarse." msgid "" "Indicates that updates to the live region should be presented at the next " "opportunity (for example at the end of speaking the current sentence)." msgstr "" "Indica que las actualizaciones de la región activa deben presentarse en la " "siguiente oportunidad (por ejemplo, al final de la frase actual)." msgid "" "Indicates that updates to the live region have the highest priority and " "should be presented immediately." msgstr "" "Indica que las actualizaciones de la región activa tienen la máxima prioridad " "y deben presentarse inmediatamente." msgid "Provides access to AES encryption/decryption of raw data." msgstr "Proporciona acceso al cifrado/descifrado AES de datos sin procesar." msgid "" "This class holds the context information required for encryption and " "decryption operations with AES (Advanced Encryption Standard). Both AES-ECB " "and AES-CBC modes are supported.\n" "[codeblocks]\n" "[gdscript]\n" "extends Node\n" "\n" "var aes = AESContext.new()\n" "\n" "func _ready():\n" "\tvar key = \"My secret key!!!\" # Key must be either 16 or 32 bytes.\n" "\tvar data = \"My secret text!!\" # Data size must be multiple of 16 bytes, " "apply padding if needed.\n" "\t# Encrypt ECB\n" "\taes.start(AESContext.MODE_ECB_ENCRYPT, key.to_utf8_buffer())\n" "\tvar encrypted = aes.update(data.to_utf8_buffer())\n" "\taes.finish()\n" "\t# Decrypt ECB\n" "\taes.start(AESContext.MODE_ECB_DECRYPT, key.to_utf8_buffer())\n" "\tvar decrypted = aes.update(encrypted)\n" "\taes.finish()\n" "\t# Check ECB\n" "\tassert(decrypted == data.to_utf8_buffer())\n" "\n" "\tvar iv = \"My secret iv!!!!\" # IV must be of exactly 16 bytes.\n" "\t# Encrypt CBC\n" "\taes.start(AESContext.MODE_CBC_ENCRYPT, key.to_utf8_buffer(), " "iv.to_utf8_buffer())\n" "\tencrypted = aes.update(data.to_utf8_buffer())\n" "\taes.finish()\n" "\t# Decrypt CBC\n" "\taes.start(AESContext.MODE_CBC_DECRYPT, key.to_utf8_buffer(), " "iv.to_utf8_buffer())\n" "\tdecrypted = aes.update(encrypted)\n" "\taes.finish()\n" "\t# Check CBC\n" "\tassert(decrypted == data.to_utf8_buffer())\n" "[/gdscript]\n" "[csharp]\n" "using Godot;\n" "using System.Diagnostics;\n" "\n" "public partial class MyNode : Node\n" "{\n" "\tprivate AesContext _aes = new AesContext();\n" "\n" "\tpublic override void _Ready()\n" "\t{\n" "\t\tstring key = \"My secret key!!!\"; // Key must be either 16 or 32 bytes.\n" "\t\tstring data = \"My secret text!!\"; // Data size must be multiple of 16 " "bytes, apply padding if needed.\n" "\t\t// Encrypt ECB\n" "\t\t_aes.Start(AesContext.Mode.EcbEncrypt, key.ToUtf8Buffer());\n" "\t\tbyte[] encrypted = _aes.Update(data.ToUtf8Buffer());\n" "\t\t_aes.Finish();\n" "\t\t// Decrypt ECB\n" "\t\t_aes.Start(AesContext.Mode.EcbDecrypt, key.ToUtf8Buffer());\n" "\t\tbyte[] decrypted = _aes.Update(encrypted);\n" "\t\t_aes.Finish();\n" "\t\t// Check ECB\n" "\t\tDebug.Assert(decrypted == data.ToUtf8Buffer());\n" "\n" "\t\tstring iv = \"My secret iv!!!!\"; // IV must be of exactly 16 bytes.\n" "\t\t// Encrypt CBC\n" "\t\t_aes.Start(AesContext.Mode.EcbEncrypt, key.ToUtf8Buffer(), " "iv.ToUtf8Buffer());\n" "\t\tencrypted = _aes.Update(data.ToUtf8Buffer());\n" "\t\t_aes.Finish();\n" "\t\t// Decrypt CBC\n" "\t\t_aes.Start(AesContext.Mode.EcbDecrypt, key.ToUtf8Buffer(), " "iv.ToUtf8Buffer());\n" "\t\tdecrypted = _aes.Update(encrypted);\n" "\t\t_aes.Finish();\n" "\t\t// Check CBC\n" "\t\tDebug.Assert(decrypted == data.ToUtf8Buffer());\n" "\t}\n" "}\n" "[/csharp]\n" "[/codeblocks]" msgstr "" "Esta clase contiene la información de contexto necesaria para las operaciones " "de cifrado y descifrado con AES (Estándar de Cifrado Avanzado). Se admiten " "los modos AES-ECB y AES-CBC.\n" "[codeblocks]\n" "[gdscript]\n" "extends Node\n" "\n" "var aes = AESContext.new()\n" "\n" "func _ready():\n" "\tvar key = \"¡¡¡Mi clave secreta!!!\" # La clave debe tener 16 o 32 bytes.\n" "\tvar data = \"¡¡¡Mi clave secreta!!!\" # El tamaño de los datos debe ser " "múltiplo de 16 bytes, y aplicar relleno si es necesario.\n" "\t# Encrypt ECB\n" "\taes.start(AESContext.MODE_ECB_ENCRYPT, key.to_utf8_buffer())\n" "\tvar encrypted = aes.update(data.to_utf8_buffer())\n" "\taes.finish()\n" "\t# Decrypt ECB\n" "\taes.start(AESContext.MODE_ECB_DECRYPT, key.to_utf8_buffer())\n" "\tvar decrypted = aes.update(encrypted)\n" "\taes.finish()\n" "\t# Check ECB\n" "\tassert(decrypted == data.to_utf8_buffer())\n" "\n" "\tvar iv = \"¡¡¡Mi IV secreto!!!\" # El IV debe tener exactamente 16 bytes.\n" "\t# Encrypt CBC\n" "\taes.start(AESContext.MODE_CBC_ENCRYPT, key.to_utf8_buffer(), " "iv.to_utf8_buffer())\n" "\tencrypted = aes.update(data.to_utf8_buffer())\n" "\taes.finish()\n" "\t# Decrypt CBC\n" "\taes.start(AESContext.MODE_CBC_DECRYPT, key.to_utf8_buffer(), " "iv.to_utf8_buffer())\n" "\tdecrypted = aes.update(encrypted)\n" "\taes.finish()\n" "\t# Check CBC\n" "\tassert(decrypted == data.to_utf8_buffer())\n" "[/gdscript]\n" "[csharp]\n" "using Godot;\n" "using System.Diagnostics;\n" "\n" "public partial class MyNode : Node\n" "{\n" "\tprivate AesContext _aes = new AesContext();\n" "\n" "\tpublic override void _Ready()\n" "\t{\n" "\t\tstring key = \"¡¡¡Mi clave secreta!!!\"; // La clave debe tener 16 o 32 " "bytes.\n" "\t\tstring data = \"¡¡Mi clave secreta!!\"; // El tamaño de los datos debe " "ser múltiplo de 16 bytes, y aplicar relleno si es necesario.\n" "\t\t// Encrypt ECB\n" "\t\t_aes.Start(AesContext.Mode.EcbEncrypt, key.ToUtf8Buffer());\n" "\t\tbyte[] encrypted = _aes.Update(data.ToUtf8Buffer());\n" "\t\t_aes.Finish();\n" "\t\t// Decrypt ECB\n" "\t\t_aes.Start(AesContext.Mode.EcbDecrypt, key.ToUtf8Buffer());\n" "\t\tbyte[] decrypted = _aes.Update(encrypted);\n" "\t\t_aes.Finish();\n" "\t\t// Check ECB\n" "\t\tDebug.Assert(decrypted == data.ToUtf8Buffer());\n" "\n" "\t\tstring iv = \"¡¡¡¡Mi IV secreto!!!!\"; // El IV debe tener exactamente 16 " "bytes.\n" "\t\t// Encrypt CBC\n" "\t\t_aes.Start(AesContext.Mode.EcbEncrypt, key.ToUtf8Buffer(), " "iv.ToUtf8Buffer());\n" "\t\tencrypted = _aes.Update(data.ToUtf8Buffer());\n" "\t\t_aes.Finish();\n" "\t\t// Decrypt CBC\n" "\t\t_aes.Start(AesContext.Mode.EcbDecrypt, key.ToUtf8Buffer(), " "iv.ToUtf8Buffer());\n" "\t\tdecrypted = _aes.Update(encrypted);\n" "\t\t_aes.Finish();\n" "\t\t// Check CBC\n" "\t\tDebug.Assert(decrypted == data.ToUtf8Buffer());\n" "\t}\n" "}\n" "[/csharp]\n" "[/codeblocks]" msgid "Close this AES context so it can be started again. See [method start]." msgstr "" "Cerrar este contexto AES para que pueda ser iniciado de nuevo. Véase [method " "start]." msgid "" "Get the current IV state for this context (IV gets updated when calling " "[method update]). You normally don't need this function.\n" "[b]Note:[/b] This function only makes sense when the context is started with " "[constant MODE_CBC_ENCRYPT] or [constant MODE_CBC_DECRYPT]." msgstr "" "Obtiene el estado actual de IV para este contexto (la IV se actualiza al " "llamar a [method update]). Normalmente no necesitas esta función.\n" "[b]Nota:[/b] Esta función solo tiene sentido cuando el contexto se inicia con " "[constant MODE_CBC_ENCRYPT] o [constant MODE_CBC_DECRYPT]." msgid "" "Start the AES context in the given [param mode]. A [param key] of either 16 " "or 32 bytes must always be provided, while an [param iv] (initialization " "vector) of exactly 16 bytes, is only needed when [param mode] is either " "[constant MODE_CBC_ENCRYPT] or [constant MODE_CBC_DECRYPT]." msgstr "" "Inicia el contexto AES en el [param mode] dado. Siempre se debe proporcionar " "una [param key] de 16 o 32 bytes, mientras que una [param iv] (vector de " "inicialización) de exactamente 16 bytes, solo se necesita cuando [param mode] " "es [constant MODE_CBC_ENCRYPT] o [constant MODE_CBC_DECRYPT]." msgid "" "Run the desired operation for this AES context. Will return a " "[PackedByteArray] containing the result of encrypting (or decrypting) the " "given [param src]. See [method start] for mode of operation.\n" "[b]Note:[/b] The size of [param src] must be a multiple of 16. Apply some " "padding if needed." msgstr "" "Ejecuta la operación deseada para este contexto AES. Devolverá un " "[PackedByteArray] que contiene el resultado de cifrar (o descifrar) la [param " "src] dada. Véase [method start] para el modo de operación.\n" "[b]Nota:[/b] El tamaño de [param src] debe ser un múltiplo de 16. Aplica " "algún relleno si es necesario." msgid "AES electronic codebook encryption mode." msgstr "Modo de cifrado ECB (Electronic Codebook) de AES." msgid "AES electronic codebook decryption mode." msgstr "Modo de desencripción AES electronic codebook(ECB)." msgid "AES cipher block chaining encryption mode." msgstr "Modo de cifrado AES en encadenamiento de bloques (CBC)." msgid "AES cipher block chaining decryption mode." msgstr "Modo de descifrado AES en encadenamiento de bloques (CBC)." msgid "Maximum value for the mode enum." msgstr "Valor máximo para el modo enum." msgid "The [AimModifier3D] rotates a bone to look at a reference bone." msgstr "El [AimModifier3D] gira un hueso para mirar un hueso de referencia." msgid "" "This is a simple version of [LookAtModifier3D] that only allows bone to the " "reference without advanced options such as angle limitation or time-based " "interpolation.\n" "The feature is simplified, but instead it is implemented with smooth tracking " "without euler, see [method set_use_euler]." msgstr "" "Esta es una versión simple de [LookAtModifier3D] que solo permite el acceso " "óseo a la referencia sin opciones avanzadas como la limitación del ángulo o " "la interpolación basada en el tiempo.\n" "La función se ha simplificado, pero se implementa con un seguimiento suave " "sin Euler; véase [method set_use_euler]." msgid "Returns the forward axis of the bone." msgstr "Devuelve el eje delantero del hueso." msgid "" "Returns the axis of the first rotation. It is enabled only if [method " "is_using_euler] is [code]true[/code]." msgstr "" "Devuelve el eje de la primera rotación. Solo se habilita si [method " "is_using_euler] es [code]true[/code]." msgid "" "Returns [code]true[/code] if the relative option is enabled in the setting at " "[param index]." msgstr "" "Devuelve [code]true[/code] si la opción relativa está habilitada en la " "configuración en [param index]." msgid "Returns [code]true[/code] if it provides rotation with using euler." msgstr "Devuelve [code]true[/code] si proporciona rotación con el uso de Euler." msgid "" "Returns [code]true[/code] if it provides rotation by two axes. It is enabled " "only if [method is_using_euler] is [code]true[/code]." msgstr "" "Devuelve [code]true[/code] si proporciona rotación por dos ejes. Solo se " "habilita si [method is_using_euler] es [code]true[/code]." msgid "Sets the forward axis of the bone." msgstr "Establece el eje delantero del hueso." msgid "" "Sets the axis of the first rotation. It is enabled only if [method " "is_using_euler] is [code]true[/code]." msgstr "" "Establece el eje de la primera rotación. Solo se habilita si [method " "is_using_euler] es [code]true[/code]." msgid "" "Sets relative option in the setting at [param index] to [param enabled].\n" "If sets [param enabled] to [code]true[/code], the rotation is applied " "relative to the pose.\n" "If sets [param enabled] to [code]false[/code], the rotation is applied " "relative to the rest. It means to replace the current pose with the " "[AimModifier3D]'s result." msgstr "" "Establece la opción relativa en el ajuste en [param index] a [param " "enabled].\n" "Si estableces [param enabled] como [code]true[/code], se aplica la rotación " "relativa a la pose.\n" "Si estableces [param enabled] como [code]false[/code], se aplica la rotación " "relativa al resto. Implica reemplazar la pose actual con el resultado de " "[AimModifier3D]." msgid "" "If sets [param enabled] to [code]true[/code], it provides rotation with using " "euler.\n" "If sets [param enabled] to [code]false[/code], it provides rotation with " "using rotation by arc generated from the forward axis vector and the vector " "toward the reference." msgstr "" "Si se establece [param enabled] en [code]true[/code], se proporciona rotación " "mediante Euler.\n" "Si se establece [param enabled] en [code]false[/code], se proporciona " "rotación mediante la rotación por arco generada desde el vector del eje " "delantero y el vector hacia la referencia." msgid "" "If sets [param enabled] to [code]true[/code], it provides rotation by two " "axes. It is enabled only if [method is_using_euler] is [code]true[/code]." msgstr "" "Si establece [param enabled] en [code]true[/code], proporciona rotación por " "dos ejes. Solo se habilita si [method is_using_euler] es [code]true[/code]." msgid "The number of settings in the modifier." msgstr "El número de configuraciones en el modificador." msgid "" "A 2D physics body that can't be moved by external forces. When moved " "manually, it affects other bodies in its path." msgstr "" "Un cuerpo físico 2D que no puede ser movido por fuerzas externas. Cuando se " "mueve manualmente, afecta a otros cuerpos en su camino." msgid "" "An animatable 2D physics body. It can't be moved by external forces or " "contacts, but can be moved manually by other means such as code, " "[AnimationMixer]s (with [member AnimationMixer.callback_mode_process] set to " "[constant AnimationMixer.ANIMATION_CALLBACK_MODE_PROCESS_PHYSICS]), and " "[RemoteTransform2D].\n" "When [AnimatableBody2D] is moved, its linear and angular velocity are " "estimated and used to affect other physics bodies in its path. This makes it " "useful for moving platforms, doors, and other moving objects." msgstr "" "Un cuerpo físico 2D animable. No puede ser movido por fuerzas externas o " "contactos, pero puede ser movido manualmente por otros medios como código, " "[AnimationMixer]s (con [member AnimationMixer.callback_mode_process] " "establecido en [constant " "AnimationMixer.ANIMATION_CALLBACK_MODE_PROCESS_PHYSICS]) y " "[RemoteTransform2D].\n" "Cuando [AnimatableBody2D] se mueve, su velocidad lineal y angular se estiman " "y se utilizan para afectar a otros cuerpos físicos en su camino. Esto lo hace " "útil para mover plataformas, puertas y otros objetos en movimiento." msgid "Physics introduction" msgstr "Introducción a la física" msgid "Troubleshooting physics issues" msgstr "Solución de problemas de física" msgid "" "If [code]true[/code], the body's movement will be synchronized to the physics " "frame. This is useful when animating movement via [AnimationPlayer], for " "example on moving platforms. Do [b]not[/b] use together with [method " "PhysicsBody2D.move_and_collide]." msgstr "" "Si es [code]true[/code], el movimiento del cuerpo se sincronizará con el " "marco de física. Esto es útil al animar el movimiento mediante " "[AnimationPlayer], por ejemplo, en plataformas móviles. [b]No[/b] lo utilices " "junto con [method PhysicsBody2D.move_and_collide]." msgid "" "A 3D physics body that can't be moved by external forces. When moved " "manually, it affects other bodies in its path." msgstr "" "Un cuerpo físico 3D que no puede ser movido por fuerzas externas. Cuando se " "mueve manualmente, afecta a otros cuerpos en su camino." msgid "" "An animatable 3D physics body. It can't be moved by external forces or " "contacts, but can be moved manually by other means such as code, " "[AnimationMixer]s (with [member AnimationMixer.callback_mode_process] set to " "[constant AnimationMixer.ANIMATION_CALLBACK_MODE_PROCESS_PHYSICS]), and " "[RemoteTransform3D].\n" "When [AnimatableBody3D] is moved, its linear and angular velocity are " "estimated and used to affect other physics bodies in its path. This makes it " "useful for moving platforms, doors, and other moving objects." msgstr "" "Un cuerpo físico 3D animable. No puede ser movido por fuerzas externas o " "contactos, pero puede ser movido manualmente por otros medios como código, " "[AnimationMixer]s (con [member AnimationMixer.callback_mode_process] " "establecido a [constant " "AnimationMixer.ANIMATION_CALLBACK_MODE_PROCESS_PHYSICS]) y " "[RemoteTransform3D].\n" "Cuando [AnimatableBody3D] se mueve, su velocidad lineal y angular se estiman " "y se utilizan para afectar a otros cuerpos físicos en su camino. Esto lo hace " "útil para mover plataformas, puertas y otros objetos en movimiento." msgid "3D Physics Tests Demo" msgstr "Demo de Pruebas de Física en 3D" msgid "Third Person Shooter (TPS) Demo" msgstr "Demo de Shooter en Tercera Persona (TPS)" msgid "3D Voxel Demo" msgstr "Demo de Vóxeles en 3D" msgid "" "If [code]true[/code], the body's movement will be synchronized to the physics " "frame. This is useful when animating movement via [AnimationPlayer], for " "example on moving platforms. Do [b]not[/b] use together with [method " "PhysicsBody3D.move_and_collide]." msgstr "" "Si es [code]true[/code], el movimiento del cuerpo se sincronizará con el " "marco de física. Esto es útil al animar el movimiento mediante " "[AnimationPlayer], por ejemplo, en plataformas móviles. [b]No[/b] lo utilices " "junto con [method PhysicsBody3D.move_and_collide]." msgid "" "Sprite node that contains multiple textures as frames to play for animation." msgstr "" "Nodo de Sprite que contiene múltiples texturas como fotogramas para " "reproducir animaciones." msgid "" "[AnimatedSprite2D] is similar to the [Sprite2D] node, except it carries " "multiple textures as animation frames. Animations are created using a " "[SpriteFrames] resource, which allows you to import image files (or a folder " "containing said files) to provide the animation frames for the sprite. The " "[SpriteFrames] resource can be configured in the editor via the SpriteFrames " "bottom panel." msgstr "" "[AnimatedSprite2D] es similar al nodo [Sprite2D], excepto que utiliza " "múltiples texturas como fotogramas de animación. Las animaciones se crean " "utilizando un recurso [SpriteFrames], que permite importar archivos de imagen " "(o una carpeta que contenga dichos archivos) para proporcionar los fotogramas " "de animación del sprite. El recurso [SpriteFrames] puede configurarse en el " "editor a través del panel inferior de SpriteFrames." msgid "2D Sprite animation" msgstr "Animación de Sprite 2D" msgid "2D Dodge The Creeps Demo" msgstr "Demo de Dodge The Creeps en 2D" msgid "" "Returns the actual playing speed of current animation or [code]0[/code] if " "not playing. This speed is the [member speed_scale] property multiplied by " "[code]custom_speed[/code] argument specified when calling the [method play] " "method.\n" "Returns a negative value if the current animation is playing backwards." msgstr "" "Devuelve la velocidad de reproducción real de la animación actual o [code]0[/" "code] si no se está reproduciendo. Esta velocidad es la propiedad [member " "speed_scale] multiplicada por el argumento [code]custom_speed[/code] " "especificado al llamar al método [method play].\n" "Devuelve un valor negativo si la animación actual se está reproduciendo hacia " "atrás." msgid "" "Returns [code]true[/code] if an animation is currently playing (even if " "[member speed_scale] and/or [code]custom_speed[/code] are [code]0[/code])." msgstr "" "Devuelve [code]true[/code] si una animación se está reproduciendo actualmente " "(incluso si [member speed_scale] y/o [code]custom_speed[/code] son [code]0[/" "code])." msgid "" "Pauses the currently playing animation. The [member frame] and [member " "frame_progress] will be kept and calling [method play] or [method " "play_backwards] without arguments will resume the animation from the current " "playback position.\n" "See also [method stop]." msgstr "" "Pausa la animación que se está reproduciendo. El [member frame] y el [member " "frame_progress] se mantendrán y al llamar a [method play] o [method " "play_backwards] sin argumentos se reanudará la animación desde la posición de " "reproducción actual.\n" "Véase también [method stop]." msgid "" "Plays the animation with key [param name]. If [param custom_speed] is " "negative and [param from_end] is [code]true[/code], the animation will play " "backwards (which is equivalent to calling [method play_backwards]).\n" "If this method is called with that same animation [param name], or with no " "[param name] parameter, the assigned animation will resume playing if it was " "paused." msgstr "" "Reproduce la animación con la clave [param name]. Si [param custom_speed] es " "negativo y [param from_end] es [code]true[/code], la animación se reproducirá " "hacia atrás (lo que equivale a llamar a [method play_backwards]).\n" "Si este método se llama con la misma animación [param name], o sin el " "parámetro [param name], la animación asignada continuará reproduciéndose si " "estaba en pausa." msgid "" "Plays the animation with key [param name] in reverse.\n" "This method is a shorthand for [method play] with [code]custom_speed = -1.0[/" "code] and [code]from_end = true[/code], so see its description for more " "information." msgstr "" "Reproduce la animación con la clave [param name] al revés.\n" "Este método es una abreviatura de [method play] con [code]custom_speed = " "-1.0[/code] y [code]from_end = true[/code], así que consulta su descripción " "para obtener más información." msgid "" "Sets [member frame] and [member frame_progress] to the given values. Unlike " "setting [member frame], this method does not reset the [member " "frame_progress] to [code]0.0[/code] implicitly.\n" "[b]Example:[/b] Change the animation while keeping the same [member frame] " "and [member frame_progress]:\n" "[codeblocks]\n" "[gdscript]\n" "var current_frame = animated_sprite.get_frame()\n" "var current_progress = animated_sprite.get_frame_progress()\n" "animated_sprite.play(\"walk_another_skin\")\n" "animated_sprite.set_frame_and_progress(current_frame, current_progress)\n" "[/gdscript]\n" "[/codeblocks]" msgstr "" "Establece [member frame] y [member frame_progress] a los valores dados. A " "diferencia de establecer [member frame], este método no reinicia el [member " "frame_progress] a [code]0.0[/code] implícitamente.\n" "[b]Ejemplo:[/b] Cambia la animación manteniendo el mismo [member frame] y " "[member frame_progress]:\n" "[codeblocks]\n" "[gdscript]\n" "var current_frame = animated_sprite.get_frame()\n" "var current_progress = animated_sprite.get_frame_progress()\n" "animated_sprite.play(\"walk_another_skin\")\n" "animated_sprite.set_frame_and_progress(current_frame, current_progress)\n" "[/gdscript]\n" "[/codeblocks]" msgid "" "Stops the currently playing animation. The animation position is reset to " "[code]0[/code] and the [code]custom_speed[/code] is reset to [code]1.0[/" "code]. See also [method pause]." msgstr "" "Detiene la animación que se está reproduciendo. La posición de la animación " "se restablece a [code]0[/code] y la [code]custom_speed[/code] se restablece a " "[code]1.0[/code]. Véase también [method pause]." msgid "" "The current animation from the [member sprite_frames] resource. If this value " "is changed, the [member frame] counter and the [member frame_progress] are " "reset." msgstr "" "La animación actual del recurso [member sprite_frames]. Si este valor cambia, " "el contador [member frame] y el [member frame_progress] se reinician." msgid "The key of the animation to play when the scene loads." msgstr "La clave de la animación que se reproducirá cuando se cargue la escena." msgid "" "If [code]true[/code], texture will be centered.\n" "[b]Note:[/b] For games with a pixel art aesthetic, textures may appear " "deformed when centered. This is caused by their position being between " "pixels. To prevent this, set this property to [code]false[/code], or consider " "enabling [member ProjectSettings.rendering/2d/snap/snap_2d_vertices_to_pixel] " "and [member ProjectSettings.rendering/2d/snap/snap_2d_transforms_to_pixel]." msgstr "" "Si es [code]true[/code], la textura se centrará.\n" "[b]Nota:[/b] Para juegos con una estética de pixel art, las texturas pueden " "aparecer deformadas cuando se centran. Esto se debe a que su posición está " "entre píxeles. Para evitar esto, establece esta propiedad en [code]false[/" "code], o considera habilitar [member ProjectSettings.rendering/2d/snap/" "snap_2d_vertices_to_pixel] y [member ProjectSettings.rendering/2d/snap/" "snap_2d_transforms_to_pixel]." msgid "If [code]true[/code], texture is flipped horizontally." msgstr "Si es [code]true[/code], la textura se voltea horizontalmente." msgid "If [code]true[/code], texture is flipped vertically." msgstr "Si es [code]true[/code], la textura se voltea verticalmente." msgid "" "The displayed animation frame's index. Setting this property also resets " "[member frame_progress]. If this is not desired, use [method " "set_frame_and_progress]." msgstr "" "El índice del fotograma de animación que se muestra. Establecer esta " "propiedad también reinicia [member frame_progress]. Si no se desea, usa " "[method set_frame_and_progress]." msgid "" "The progress value between [code]0.0[/code] and [code]1.0[/code] until the " "current frame transitions to the next frame. If the animation is playing " "backwards, the value transitions from [code]1.0[/code] to [code]0.0[/code]." msgstr "" "El valor de progreso entre [code]0.0[/code] y [code]1.0[/code] hasta que el " "fotograma actual hace la transición al siguiente fotograma. Si la animación " "se está reproduciendo hacia atrás, el valor hace la transición de [code]1.0[/" "code] a [code]0.0[/code]." msgid "The texture's drawing offset." msgstr "El desplazamiento al dibujar de la textura." msgid "" "The speed scaling ratio. For example, if this value is [code]1[/code], then " "the animation plays at normal speed. If it's [code]0.5[/code], then it plays " "at half speed. If it's [code]2[/code], then it plays at double speed.\n" "If set to a negative value, the animation is played in reverse. If set to " "[code]0[/code], the animation will not advance." msgstr "" "La relación de escala de velocidad. Por ejemplo, si este valor es [code]1[/" "code], entonces la animación se reproduce a velocidad normal. Si es " "[code]0.5[/code], entonces se reproduce a media velocidad. Si es [code]2[/" "code], entonces se reproduce al doble de velocidad.\n" "Si se establece en un valor negativo, la animación se reproduce en reversa. " "Si se establece en [code]0[/code], la animación no avanzará." msgid "" "The [SpriteFrames] resource containing the animation(s). Allows you the " "option to load, edit, clear, make unique and save the states of the " "[SpriteFrames] resource." msgstr "" "El recurso [SpriteFrames] que contiene la(s) animación(es). Te permite " "cargar, editar, borrar, hacer único y guardar los estados del recurso " "[SpriteFrames]." msgid "Emitted when [member animation] changes." msgstr "Emitida cuando [member animation] cambia." msgid "" "Emitted when the animation reaches the end, or the start if it is played in " "reverse. When the animation finishes, it pauses the playback.\n" "[b]Note:[/b] This signal is not emitted if an animation is looping." msgstr "" "Emitida cuando la animación llega al final, o al inicio si se reproduce en " "reversa. Cuando la animación termina, pausa la reproducción.\n" "[b]Nota:[/b] Esta señal no se emite si una animación está en bucle." msgid "Emitted when the animation loops." msgstr "Emitida cuando la animación se repite." msgid "Emitted when [member frame] changes." msgstr "Emitida cuando [member frame] cambia." msgid "Emitted when [member sprite_frames] changes." msgstr "Emitida cuando [member sprite_frames] cambia." msgid "" "2D sprite node in 3D world, that can use multiple 2D textures for animation." msgstr "" "Nodo de sprites 2D en el mundo 3D, que puede usar múltiples texturas 2D para " "la animación." msgid "" "[AnimatedSprite3D] is similar to the [Sprite3D] node, except it carries " "multiple textures as animation [member sprite_frames]. Animations are created " "using a [SpriteFrames] resource, which allows you to import image files (or a " "folder containing said files) to provide the animation frames for the sprite. " "The [SpriteFrames] resource can be configured in the editor via the " "SpriteFrames bottom panel." msgstr "" "[AnimatedSprite3D] es similar al nodo [Sprite3D], excepto que contiene " "múltiples texturas como [member sprite_frames] de animación. Las animaciones " "se crean mediante el recurso [SpriteFrames], que permite importar archivos de " "imagen (o una carpeta que contenga dichos archivos) para generar los " "fotogramas de animación del sprite. El recurso [SpriteFrames] se puede " "configurar en el editor mediante el panel inferior SpriteFrames." msgid "2D Sprite animation (also applies to 3D)" msgstr "Animación del Sprite 2D (también se aplica a 3D)" msgid "" "This class does not work properly in current versions and may be removed in " "the future. There is currently no equivalent workaround." msgstr "" "Esta clase no funciona correctamente en las versiones actuales y podría " "eliminarse en el futuro. Actualmente no existe una solución alternativa " "equivalente." msgid "Proxy texture for simple frame-based animations." msgstr "Textura de conexión para animaciones simples basadas en fotogramas." msgid "" "[AnimatedTexture] is a resource format for frame-based animations, where " "multiple textures can be chained automatically with a predefined delay for " "each frame. Unlike [AnimationPlayer] or [AnimatedSprite2D], it isn't a " "[Node], but has the advantage of being usable anywhere a [Texture2D] resource " "can be used, e.g. in a [TileSet].\n" "The playback of the animation is controlled by the [member speed_scale] " "property, as well as each frame's duration (see [method set_frame_duration]). " "The animation loops, i.e. it will restart at frame 0 automatically after " "playing the last frame.\n" "[AnimatedTexture] currently requires all frame textures to have the same " "size, otherwise the bigger ones will be cropped to match the smallest one.\n" "[b]Note:[/b] AnimatedTexture doesn't support using [AtlasTexture]s. Each " "frame needs to be a separate [Texture2D].\n" "[b]Warning:[/b] The current implementation is not efficient for the modern " "renderers." msgstr "" "[AnimatedTexture] es un formato de recurso para animaciones basadas en " "fotogramas, donde se pueden encadenar múltiples texturas automáticamente con " "un retardo predefinido para cada fotograma. A diferencia de [AnimationPlayer] " "o [AnimatedSprite2D], no es un [Node], pero tiene la ventaja de poderse usar " "en cualquier lugar donde se pueda usar un recurso [Texture2D], p. ej. en un " "[TileSet].\n" "La reproducción de la animación está controlada por la propiedad [member " "speed_scale], así como por la duración de cada fotograma (véase [method " "set_frame_duration]). La animación se repite, es decir, se reiniciará " "automáticamente en el fotograma 0 tras reproducir el último fotograma.\n" "[AnimatedTexture] requiere actualmente que todas las texturas de los " "fotogramas tengan el mismo tamaño; de lo contrario, las más grandes se " "recortarán para que coincidan con la más pequeña.\n" "[b]Nota:[/b] AnimatedTexture no admite el uso de [AtlasTexture]s. Cada " "fotograma debe ser una [Texture2D] independiente.\n" "[b]Advertencia:[/b] La implementación actual no es eficiente para los " "renderizadores modernos." msgid "Returns the given [param frame]'s duration, in seconds." msgstr "Devuelve la duración del [param frame] dado, en segundos." msgid "Returns the given frame's [Texture2D]." msgstr "Devuelve el [Texture2D] del marco dado." msgid "" "Sets the duration of any given [param frame]. The final duration is affected " "by the [member speed_scale]. If set to [code]0[/code], the frame is skipped " "during playback." msgstr "" "Establece la duración de cualquier [param frame] dado. La duración final se " "ve afectada por el [member speed_scale]. Si se establece en [code]0[/code], " "el fotograma se omite durante la reproducción." msgid "" "Assigns a [Texture2D] to the given frame. Frame IDs start at 0, so the first " "frame has ID 0, and the last frame of the animation has ID [member frames] - " "1.\n" "You can define any number of textures up to [constant MAX_FRAMES], but keep " "in mind that only frames from 0 to [member frames] - 1 will be part of the " "animation." msgstr "" "Asigna una [Texture2D] al fotograma dado. Los ID de los fotogramas empiezan " "en 0, así que el primer fotograma tiene ID 0, y el último fotograma de la " "animación tiene ID [member frames] - 1.\n" "Puedes definir cualquier número de texturas hasta [constant MAX_FRAMES], pero " "ten en cuenta que solo los fotogramas de 0 a [member frames] - 1 formarán " "parte de la animación." msgid "" "Sets the currently visible frame of the texture. Setting this frame while " "playing resets the current frame time, so the newly selected frame plays for " "its whole configured frame duration." msgstr "" "Establece el fotograma actualmente visible de la textura. Establecer este " "fotograma mientras se reproduce reinicia el tiempo del fotograma actual, por " "lo que el fotograma recién seleccionado se reproduce durante toda la duración " "del fotograma configurada." msgid "" "Number of frames to use in the animation. While you can create the frames " "independently with [method set_frame_texture], you need to set this value for " "the animation to take new frames into account. The maximum number of frames " "is [constant MAX_FRAMES]." msgstr "" "Número de fotogramas a usar en la animación. Aunque puedes crear los " "fotogramas independientemente con [method set_frame_texture], necesitas " "establecer este valor para que la animación tenga en cuenta los nuevos " "fotogramas. El número máximo de fotogramas es [constant MAX_FRAMES]." msgid "" "If [code]true[/code], the animation will only play once and will not loop " "back to the first frame after reaching the end. Note that reaching the end " "will not set [member pause] to [code]true[/code]." msgstr "" "Si es [code]true[/code], la animación sólo se reproducirá una vez y no " "volverá al primer fotograma después de llegar al final. Ten en cuenta que al " "llegar al final no se establecerá [member pause] en [code]true[/code]." msgid "" "If [code]true[/code], the animation will pause where it currently is (i.e. at " "[member current_frame]). The animation will continue from where it was paused " "when changing this property to [code]false[/code]." msgstr "" "Si es [code]true[/code], la animación se detendrá donde se encuentra " "actualmente (es decir, en [member current_frame]). La animación continuará " "desde donde se detuvo al cambiar esta propiedad a [code]false[/code]." msgid "" "The animation speed is multiplied by this value. If set to a negative value, " "the animation is played in reverse." msgstr "" "La velocidad de la animación se multiplica por este valor. Si se establece un " "valor negativo, la animación se reproduce en reversa." msgid "" "The maximum number of frames supported by [AnimatedTexture]. If you need more " "frames in your animation, use [AnimationPlayer] or [AnimatedSprite2D]." msgstr "" "El número máximo de fotogramas soportados por [AnimatedTexture]. Si necesitas " "más fotogramas en tu animación, usa [AnimationPlayer] o [AnimatedSprite2D]." msgid "Holds data that can be used to animate anything in the engine." msgstr "" "Contiene datos que pueden usarse para animar cualquier cosa en el motor." msgid "" "This resource holds data that can be used to animate anything in the engine. " "Animations are divided into tracks and each track must be linked to a node. " "The state of that node can be changed through time, by adding timed keys " "(events) to the track.\n" "[codeblocks]\n" "[gdscript]\n" "# This creates an animation that makes the node \"Enemy\" move to the right " "by\n" "# 100 pixels in 2.0 seconds.\n" "var animation = Animation.new()\n" "var track_index = animation.add_track(Animation.TYPE_VALUE)\n" "animation.track_set_path(track_index, \"Enemy:position:x\")\n" "animation.track_insert_key(track_index, 0.0, 0)\n" "animation.track_insert_key(track_index, 2.0, 100)\n" "animation.length = 2.0\n" "[/gdscript]\n" "[csharp]\n" "// This creates an animation that makes the node \"Enemy\" move to the right " "by\n" "// 100 pixels in 2.0 seconds.\n" "var animation = new Animation();\n" "int trackIndex = animation.AddTrack(Animation.TrackType.Value);\n" "animation.TrackSetPath(trackIndex, \"Enemy:position:x\");\n" "animation.TrackInsertKey(trackIndex, 0.0f, 0);\n" "animation.TrackInsertKey(trackIndex, 2.0f, 100);\n" "animation.Length = 2.0f;\n" "[/csharp]\n" "[/codeblocks]\n" "Animations are just data containers, and must be added to nodes such as an " "[AnimationPlayer] to be played back. Animation tracks have different types, " "each with its own set of dedicated methods. Check [enum TrackType] to see " "available types.\n" "[b]Note:[/b] For 3D position/rotation/scale, using the dedicated [constant " "TYPE_POSITION_3D], [constant TYPE_ROTATION_3D] and [constant TYPE_SCALE_3D] " "track types instead of [constant TYPE_VALUE] is recommended for performance " "reasons." msgstr "" "Este recurso contiene los datos que pueden utilizarse para animar cualquier " "cosa en el motor. Las animaciones se dividen en pistas (tracks) y cada pista " "debe estar vinculada a un nodo. El estado de dicho nodo puede cambiarse a lo " "largo del tiempo añadiendo claves temporales (eventos) en las pistas.\n" "[codeblocks]\n" "[gdscript]\n" "# Esto crea una animación que hace que el nodo \"Enemy\" se mueva a la " "derecha\n" "# 100 píxeles en 2.0 segundos.\n" "var animation = Animation.new()\n" "var track_index = animation.add_track(Animation.TYPE_VALUE)\n" "animation.track_set_path(track_index, \"Enemy:position:x\")\n" "animation.track_insert_key(track_index, 0.0, 0)\n" "animation.track_insert_key(track_index, 2.0, 100)\n" "animation.length = 2.0\n" "[/gdscript]\n" "[csharp]\n" "// Esto crea una animación que hace que el nodo \"Enemy\" se mueva a la " "derecha\n" "// 100 píxeles en 2.0 segundos.\n" "var animation = new Animation();\n" "int trackIndex = animation.AddTrack(Animation.TrackType.Value);\n" "animation.TrackSetPath(trackIndex, \"Enemy:position:x\");\n" "animation.TrackInsertKey(trackIndex, 0.0f, 0);\n" "animation.TrackInsertKey(trackIndex, 2.0f, 100);\n" "animation.Length = 2.0f;\n" "[/csharp]\n" "[/codeblocks]\n" "Las animaciones son sólo contenedores de datos y deben añadirse a nodos como " "un [AnimationPlayer] para poder ser reproducidas. Las pistas de animación " "tienen diferentes tipos, cada una con su propio conjunto de métodos " "dedicados. Véase [enum TrackType] para ver los tipos disponibles.\n" "[b]Nota:[/b] Para posición/rotación/escala en 3D, se recomienda utilizar los " "tipos de pista dedicados [constant TYPE_POSITION_3D], [constant " "TYPE_ROTATION_3D] y [constant TYPE_SCALE_3D] en lugar de [constant " "TYPE_VALUE] por razones de rendimiento." msgid "Animation documentation index" msgstr "Índice de documentación de animación" msgid "Adds a marker to this Animation." msgstr "Agrega un marcador a esta Animación." msgid "Adds a track to the Animation." msgstr "Añade una pista a la animación." msgid "" "Returns the animation name at the key identified by [param key_idx]. The " "[param track_idx] must be the index of an Animation Track." msgstr "" "Devuelve el nombre de la animación en la clave identificada por [param " "key_idx]. El [param track_idx] debe ser el índice de una pista de animación." msgid "" "Inserts a key with value [param animation] at the given [param time] (in " "seconds). The [param track_idx] must be the index of an Animation Track." msgstr "" "Inserta una clave con el valor [param animation] en el [param time] dado (en " "segundos). El [param track_idx] debe ser el índice de una pista de animación." msgid "" "Sets the key identified by [param key_idx] to value [param animation]. The " "[param track_idx] must be the index of an Animation Track." msgstr "" "Establece la clave identificada por [param key_idx] con el valor [param " "animation]. El [param track_idx] debe ser el índice de una pista de animación." msgid "" "Returns the end offset of the key identified by [param key_idx]. The [param " "track_idx] must be the index of an Audio Track.\n" "End offset is the number of seconds cut off at the ending of the audio stream." msgstr "" "Devuelve el desplazamiento final de la clave identificada por [param " "key_idx]. El [param track_idx] debe ser el índice de una pista de audio.\n" "El desplazamiento final es el número de segundos que se cortan al final de la " "transmisión de audio." msgid "" "Returns the start offset of the key identified by [param key_idx]. The [param " "track_idx] must be the index of an Audio Track.\n" "Start offset is the number of seconds cut off at the beginning of the audio " "stream." msgstr "" "Devuelve el desplazamiento inicial de la clave identificada por [param " "key_idx]. El [param track_idx] debe ser el índice de una pista de audio.\n" "El desplazamiento de inicio es el número de segundos que se cortan al " "principio de la transmisión de audio." msgid "" "Returns the audio stream of the key identified by [param key_idx]. The [param " "track_idx] must be the index of an Audio Track." msgstr "" "Devuelve el flujo de audio de la clave identificada por [param key_idx]. El " "[param track_idx] debe ser el índice de una pista de audio." msgid "" "Inserts an Audio Track key at the given [param time] in seconds. The [param " "track_idx] must be the index of an Audio Track.\n" "[param stream] is the [AudioStream] resource to play. [param start_offset] is " "the number of seconds cut off at the beginning of the audio stream, while " "[param end_offset] is at the ending." msgstr "" "Inserta una clave de pista de Audio en el [param time] dado en segundos. El " "[param track_idx] debe ser el índice de una Pista de Audio.\n" "[param stream] es el recurso [AudioStream] que se va a reproducir. [param " "start_offset] es el número de segundos que se recortan al principio del flujo " "de audio, mientras que [param end_offset] es al final." msgid "" "Returns [code]true[/code] if the track at [param track_idx] will be blended " "with other animations." msgstr "" "Devuelve [code]true[/code] si la pista en [param track_idx] se combinará con " "otras animaciones." msgid "" "Sets the end offset of the key identified by [param key_idx] to value [param " "offset]. The [param track_idx] must be the index of an Audio Track." msgstr "" "Establece el desplazamiento final de la clave identificada por [param " "key_idx] al valor [param offset]. El [param track_idx] debe ser el índice de " "una pista de audio." msgid "" "Sets the start offset of the key identified by [param key_idx] to value " "[param offset]. The [param track_idx] must be the index of an Audio Track." msgstr "" "Establece el desplazamiento inicial de la clave identificada por [param " "key_idx] al valor [param offset]. El [param track_idx] debe ser el índice de " "una pista de audio." msgid "" "Sets the stream of the key identified by [param key_idx] to value [param " "stream]. The [param track_idx] must be the index of an Audio Track." msgstr "" "Establece el flujo de la clave identificada por [param key_idx] al valor " "[param stream]. El [param track_idx] debe ser el índice de una pista de audio." msgid "" "Sets whether the track will be blended with other animations. If [code]true[/" "code], the audio playback volume changes depending on the blend value." msgstr "" "Establece si la pista se combinará con otras animaciones. Si es [code]true[/" "code], el volumen de reproducción de audio cambia dependiendo del valor de la " "mezcla." msgid "" "Returns the in handle of the key identified by [param key_idx]. The [param " "track_idx] must be the index of a Bezier Track." msgstr "" "Devuelve el \"in handle\" de la clave identificada por [param key_idx]. El " "[param track_idx] debe ser el índice de una pista Bezier." msgid "" "Returns the out handle of the key identified by [param key_idx]. The [param " "track_idx] must be the index of a Bezier Track." msgstr "" "Devuelve el \"out handle\" de la clave identificada por [param key_idx]. El " "[param track_idx] debe ser el índice de una pista Bezier." msgid "" "Returns the value of the key identified by [param key_idx]. The [param " "track_idx] must be the index of a Bezier Track." msgstr "" "Devuelve el valor de la clave identificada por [param key_idx]. El [param " "track_idx] debe ser el índice de una pista Bezier." msgid "" "Inserts a Bezier Track key at the given [param time] in seconds. The [param " "track_idx] must be the index of a Bezier Track.\n" "[param in_handle] is the left-side weight of the added Bezier curve point, " "[param out_handle] is the right-side one, while [param value] is the actual " "value at this point." msgstr "" "Inserta una clave de pista Bezier en el [param time] dado en segundos. El " "[param track_idx] debe ser el índice de una pista Bezier.\n" "[param in_handle] es el peso del lado izquierdo del punto de la curva Bezier " "añadido, [param out_handle] es el del lado derecho, mientras que [param " "value] es el valor actual en este punto." msgid "" "Returns the interpolated value at the given [param time] (in seconds). The " "[param track_idx] must be the index of a Bezier Track." msgstr "" "Devuelve el valor interpolado en el [param time] dado (en segundos). El " "[param track_idx] debe ser el índice de una pista Bezier." msgid "" "Sets the in handle of the key identified by [param key_idx] to value [param " "in_handle]. The [param track_idx] must be the index of a Bezier Track." msgstr "" "Establece el \"in handle\" de la clave identificada por [param key_idx] al " "valor [param in_handle]. El [param track_idx] debe ser el índice de una pista " "Bezier." msgid "" "Sets the out handle of the key identified by [param key_idx] to value [param " "out_handle]. The [param track_idx] must be the index of a Bezier Track." msgstr "" "Establece el \"out handle\" de la clave identificada por [param key_idx] al " "valor [param out_handle]. El [param track_idx] debe ser el índice de una " "pista Bezier." msgid "" "Sets the value of the key identified by [param key_idx] to the given value. " "The [param track_idx] must be the index of a Bezier Track." msgstr "" "Establece el valor de la clave identificada por [param key_idx] al valor " "dado. El [param track_idx] debe ser el índice de una pista Bezier." msgid "Inserts a key in a given blend shape track. Returns the key index." msgstr "" "Inserta una clave en una pista de la \"blend shape\" dada. Devuelve el índice " "de la clave." msgid "" "Returns the interpolated blend shape value at the given time (in seconds). " "The [param track_idx] must be the index of a blend shape track." msgstr "" "Devuelve el valor interpolado de la \"blend shape\" en el time dado (en " "segundos). El [param track_idx] debe ser el índice de una pista de \"blend " "shape\"." msgid "Clear the animation (clear all tracks and reset all)." msgstr "Limpiar la animación (limpia todas las pistas y reinicia todo)." msgid "" "Compress the animation and all its tracks in-place. This will make [method " "track_is_compressed] return [code]true[/code] once called on this " "[Animation]. Compressed tracks require less memory to be played, and are " "designed to be used for complex 3D animations (such as cutscenes) imported " "from external 3D software. Compression is lossy, but the difference is " "usually not noticeable in real world conditions.\n" "[b]Note:[/b] Compressed tracks have various limitations (such as not being " "editable from the editor), so only use compressed animations if you actually " "need them." msgstr "" "Comprime la animación y todas sus pistas en su lugar. Esto hará que [method " "track_is_compressed] devuelva [code]true[/code] al llamar a esta [Animation]. " "Las pistas comprimidas requieren menos memoria para reproducirse y están " "diseñadas para animaciones 3D complejas (como cinemáticas) importadas desde " "software 3D externo. La compresión tiene pérdidas, pero la diferencia no " "suele ser perceptible en condiciones reales.\n" "[b]Nota:[/b] Las pistas comprimidas tienen varias limitaciones (como no ser " "editables desde el editor), así que solo usa animaciones comprimidas si " "realmente las necesitas." msgid "" "Adds a new track to [param to_animation] that is a copy of the given track " "from this animation." msgstr "" "Añade una nueva pista a [param to_animation] que es una copia de la pista " "dada de esta animación." msgid "" "Returns the index of the specified track. If the track is not found, return " "-1." msgstr "" "Devuelve el índice de la pista especificada. Si la pista no se encuentra, " "devuelve -1." msgid "Returns the name of the marker located at the given time." msgstr "Devuelve el nombre del marcador ubicado en el tiempo dado." msgid "Returns the given marker's color." msgstr "Devuelve el color del marcador dado." msgid "Returns every marker in this Animation, sorted ascending by time." msgstr "" "Devuelve cada marcador en esta animación, ordenado de forma ascendente por " "tiempo." msgid "Returns the given marker's time." msgstr "Devuelve el tiempo del marcador dado." msgid "" "Returns the closest marker that comes after the given time. If no such marker " "exists, an empty string is returned." msgstr "" "Devuelve el marcador más cercano que viene después del tiempo dado. Si no " "existe tal marcador, se devuelve una string vacía." msgid "" "Returns the closest marker that comes before the given time. If no such " "marker exists, an empty string is returned." msgstr "" "Devuelve el marcador más cercano que está antes del tiempo dado. Si no existe " "tal marcador, se devuelve una string vacía." msgid "Returns the amount of tracks in the animation." msgstr "Devuelve la cantidad de pistas en la animación." msgid "" "Returns [code]true[/code] if this Animation contains a marker with the given " "name." msgstr "" "Devuelve [code]true[/code] si esta animación contiene un marcador con el " "nombre dado." msgid "Returns the method name of a method track." msgstr "Devuelve el nombre del método de una pista de método." msgid "" "Returns the arguments values to be called on a method track for a given key " "in a given track." msgstr "" "Devuelve los valores de los argumentos que se llamarán en una pista del " "método para una clave determinada en una pista determinada." msgid "" "Optimize the animation and all its tracks in-place. This will preserve only " "as many keys as are necessary to keep the animation within the specified " "bounds." msgstr "" "Optimiza la animación y todas sus pistas en el lugar. Esto conservará solo " "las claves necesarias para mantener la animación dentro de los límites " "especificados." msgid "Inserts a key in a given 3D position track. Returns the key index." msgstr "" "Inserta una clave en una posición de la pista 3D dada. Devuelve el índice de " "la clave." msgid "" "Returns the interpolated position value at the given time (in seconds). The " "[param track_idx] must be the index of a 3D position track." msgstr "" "Devuelve el valor de posición interpolado en el tiempo dado (en segundos). El " "[param track_idx] debe ser el índice de una pista de posición 3D." msgid "Removes the marker with the given name from this Animation." msgstr "Elimina el marcador con el nombre dado de esta animación." msgid "Removes a track by specifying the track index." msgstr "Elimina una pista especificando el índice de la pista." msgid "Inserts a key in a given 3D rotation track. Returns the key index." msgstr "" "Inserta una clave en una pista de rotación 3D determinada. Devuelve el índice " "de la clave." msgid "" "Returns the interpolated rotation value at the given time (in seconds). The " "[param track_idx] must be the index of a 3D rotation track." msgstr "" "Devuelve el valor de rotación interpolado en el tiempo dado (en segundos). El " "[param track_idx] debe ser el índice de una pista de rotación 3D." msgid "Inserts a key in a given 3D scale track. Returns the key index." msgstr "" "Inserta una clave en una pista de escala 3D determinada. Devuelve el índice " "de la clave." msgid "" "Returns the interpolated scale value at the given time (in seconds). The " "[param track_idx] must be the index of a 3D scale track." msgstr "" "Devuelve el valor de escala interpolado en el tiempo dado (en segundos). El " "[param track_idx] debe ser el índice de una pista de escala 3D." msgid "Sets the given marker's color." msgstr "Establece el color del marcador dado." msgid "" "Finds the key index by time in a given track. Optionally, only find it if the " "approx/exact time is given.\n" "If [param limit] is [code]true[/code], it does not return keys outside the " "animation range.\n" "If [param backward] is [code]true[/code], the direction is reversed in " "methods that rely on one directional processing.\n" "For example, in case [param find_mode] is [constant FIND_MODE_NEAREST], if " "there is no key in the current position just after seeked, the first key " "found is retrieved by searching before the position, but if [param backward] " "is [code]true[/code], the first key found is retrieved after the position." msgstr "" "Encuentra el índice de la clave por tiempo en una pista dada. Opcionalmente, " "solo lo encuentra si se da el tiempo aproximado/exacto.\n" "Si [param limit] es [code]true[/code], no devuelve las claves fuera del rango " "de la animación.\n" "Si [param backward] es [code]true[/code], la dirección se invierte en los " "métodos que se basan en el procesamiento unidireccional.\n" "Por ejemplo, en el caso de que [param find_mode] sea [constant " "FIND_MODE_NEAREST], si no hay ninguna clave en la posición actual justo " "después de buscar, la primera clave encontrada se recupera buscando antes de " "la posición, pero si [param backward] es [code]true[/code], la primera clave " "encontrada se recupera después de la posición." msgid "" "Returns [code]true[/code] if the track at [param track_idx] wraps the " "interpolation loop. New tracks wrap the interpolation loop by default." msgstr "" "Devuelve [code]true[/code] si la pista en [param track_idx] envuelve el bucle " "de interpolación. Las nuevas pistas envuelven el bucle de interpolación por " "defecto." msgid "Returns the interpolation type of a given track." msgstr "Devuelve el tipo de interpolación de una pista determinada." msgid "Returns the number of keys in a given track." msgstr "Devuelve la cantidad de claves en una pista determinada." msgid "Returns the time at which the key is located." msgstr "Devuelve la hora en la que se encuentra la clave." msgid "" "Returns the transition curve (easing) for a specific key (see the built-in " "math function [method @GlobalScope.ease])." msgstr "" "Devuelve la curva de transición (suavizado) para una clave específica (véase " "la función matemática incorporada [method @GlobalScope.ease])." msgid "Returns the value of a given key in a given track." msgstr "Devuelve el valor de una clave determinada en una pista determinada." msgid "" "Gets the path of a track. For more information on the path format, see " "[method track_set_path]." msgstr "" "Obtiene el camino de una pista. Para más información sobre el formato de la " "ruta, ver [method track_set_path]." msgid "Gets the type of a track." msgstr "Obtiene el tipo de pista." msgid "Inserts a generic key in a given track. Returns the key index." msgstr "" "Inserta una clave genérica en una pista determinada. Devuelve el índice de la " "clave." msgid "" "Returns [code]true[/code] if the track is compressed, [code]false[/code] " "otherwise. See also [method compress]." msgstr "" "Devuelve [code]true[/code] si la pista está comprimida, y [code]false[/code] " "en caso contrario. Véase también [method compress]." msgid "" "Returns [code]true[/code] if the track at index [param track_idx] is enabled." msgstr "" "Devuelve [code]true[/code] si la pista en el índice [param track_idx] está " "habilitada." msgid "" "Returns [code]true[/code] if the given track is imported. Else, return " "[code]false[/code]." msgstr "" "Devuelve [code]true[/code] si la pista dada es importada. Si no, devuelve " "[code]false[/code]." msgid "Moves a track down." msgstr "Mueve una pista hacia abajo." msgid "" "Changes the index position of track [param track_idx] to the one defined in " "[param to_idx]." msgstr "" "Cambia la posición del índice de la pista [param track_idx] a la definida en " "[param to_idx]." msgid "Moves a track up." msgstr "Mueve una pista hacia arriba." msgid "Removes a key by index in a given track." msgstr "Elimina una clave por índice en una pista dada." msgid "Removes a key at [param time] in a given track." msgstr "Elimina una clave en [param time] en una pista dada." msgid "Enables/disables the given track. Tracks are enabled by default." msgstr "" "Habilita o deshabilita la pista dada. Las pistas están habilitadas por " "defecto." msgid "Sets the given track as imported or not." msgstr "Establece la pista dada como importada o no." msgid "" "If [code]true[/code], the track at [param track_idx] wraps the interpolation " "loop." msgstr "" "Si es [code]true[/code], la pista en [param track_idx] envuelve el bucle de " "interpolación." msgid "Sets the interpolation type of a given track." msgstr "Establece el tipo de interpolación de una pista determinada." msgid "Sets the time of an existing key." msgstr "Establece la hora de una clave existente." msgid "" "Sets the transition curve (easing) for a specific key (see the built-in math " "function [method @GlobalScope.ease])." msgstr "" "Establece la curva de transición (easing) para una clave específica (véase la " "función matemática incorporada [method @GlobalScope.ease])." msgid "Sets the value of an existing key." msgstr "Establece el valor de una clave existente." msgid "" "Sets the path of a track. Paths must be valid scene-tree paths to a node and " "must be specified starting from the [member AnimationMixer.root_node] that " "will reproduce the animation. Tracks that control properties or bones must " "append their name after the path, separated by [code]\":\"[/code].\n" "For example, [code]\"character/skeleton:ankle\"[/code] or [code]\"character/" "mesh:transform/local\"[/code]." msgstr "" "Establece la ruta de una pista. Las rutas deben ser rutas válidas del árbol " "de escenas a un nodo y deben especificarse a partir del [member " "AnimationMixer.root_node] que reproducirá la animación. Las pistas que " "controlan propiedades o huesos deben añadir su nombre después de la ruta, " "separado por [code]\":\"[/code].\n" "Por ejemplo, [code]\"character/skeleton:ankle\"[/code] o [code]\"character/" "mesh:transform/local\"[/code]." msgid "" "Swaps the track [param track_idx]'s index position with the track [param " "with_idx]." msgstr "" "Intercambia la posición del índice [param track_idx] de la pista con el " "[param with_idx] de la pista." msgid "Returns the update mode of a value track." msgstr "Devuelve el modo de actualización de una pista de valores." msgid "" "Returns the interpolated value at the given time (in seconds). The [param " "track_idx] must be the index of a value track.\n" "A [param backward] mainly affects the direction of key retrieval of the track " "with [constant UPDATE_DISCRETE] converted by [constant " "AnimationMixer.ANIMATION_CALLBACK_MODE_DISCRETE_FORCE_CONTINUOUS] to match " "the result with [method track_find_key]." msgstr "" "Devuelve el valor interpolado en el tiempo dado (en segundos). El [param " "track_idx] debe ser el índice de una pista de valor.\n" "Un [param backward] afecta principalmente a la dirección de recuperación de " "la clave de la pista con [constant UPDATE_DISCRETE] convertida por [constant " "AnimationMixer.ANIMATION_CALLBACK_MODE_DISCRETE_FORCE_CONTINUOUS] para que " "coincida con el resultado de [method track_find_key]." msgid "Sets the update mode of a value track." msgstr "Establece el modo de actualización de una pista de valores." msgid "" "Returns [code]true[/code] if the capture track is included. This is a cached " "readonly value for performance." msgstr "" "Devuelve [code]true[/code] si la pista de captura está incluida. Este es un " "valor de solo lectura almacenado en caché por razones de rendimiento." msgid "" "The total length of the animation (in seconds).\n" "[b]Note:[/b] Length is not delimited by the last key, as this one may be " "before or after the end to ensure correct interpolation and looping." msgstr "" "La duración total de la animación (en segundos).\n" "[b]Nota:[/b] La longitud no está delimitada por la última clave, ya que ésta " "puede estar antes o después del final para asegurar una correcta " "interpolación y bucle." msgid "" "Determines the behavior of both ends of the animation timeline during " "animation playback. This indicates whether and how the animation should be " "restarted, and is also used to correctly interpolate animation cycles." msgstr "" "Determina el comportamiento de ambos extremos de la línea de tiempo de la " "animación durante la reproducción de la animación. Esto indica si la " "animación debe reiniciarse y cómo, y también se utiliza para interpolar " "correctamente los ciclos de animación." msgid "The animation step value." msgstr "El valor del paso de la animación." msgid "" "Value tracks set values in node properties, but only those which can be " "interpolated. For 3D position/rotation/scale, using the dedicated [constant " "TYPE_POSITION_3D], [constant TYPE_ROTATION_3D] and [constant TYPE_SCALE_3D] " "track types instead of [constant TYPE_VALUE] is recommended for performance " "reasons." msgstr "" "Las pistas de valor establecen valores en las propiedades de los nodos, pero " "solo aquellos que pueden ser interpolados. Para la posición/rotación/escala " "3D, se recomienda usar los tipos de pista dedicados [constant " "TYPE_POSITION_3D], [constant TYPE_ROTATION_3D] y [constant TYPE_SCALE_3D] en " "lugar de [constant TYPE_VALUE] por razones de rendimiento." msgid "3D position track (values are stored in [Vector3]s)." msgstr "Pista de posición 3D (los valores se almacenan en [Vector3]s)." msgid "3D rotation track (values are stored in [Quaternion]s)." msgstr "Pista de rotación 3D (los valores se almacenan en [Quaternion]s)." msgid "3D scale track (values are stored in [Vector3]s)." msgstr "Pista de escala 3D (los valores se almacenan en [Vector3]s)." msgid "Blend shape track." msgstr "Pista de Blendshape." msgid "Method tracks call functions with given arguments per key." msgstr "" "El método rastrea las funciones de llamada con argumentos dados por clave." msgid "" "Bezier tracks are used to interpolate a value using custom curves. They can " "also be used to animate sub-properties of vectors and colors (e.g. alpha " "value of a [Color])." msgstr "" "Las pistas de Bezier se usan para interpolar un valor usando curvas " "personalizadas. También se pueden utilizar para animar sub-propiedades de " "vectores y colores (por ejemplo, el valor alfa de un [Color])." msgid "" "Audio tracks are used to play an audio stream with either type of " "[AudioStreamPlayer]. The stream can be trimmed and previewed in the animation." msgstr "" "Las pistas de audio se utilizan para reproducir un stream de audio con " "cualquier tipo de [AudioStreamPlayer]. El stream puede ser recortado y " "previsualizado en la animación." msgid "Animation tracks play animations in other [AnimationPlayer] nodes." msgstr "" "Las pistas de animación reproducen las animaciones en otros nodos " "[AnimationPlayer]." msgid "No interpolation (nearest value)." msgstr "No hay interpolación (valor más cercano)." msgid "Linear interpolation." msgstr "Interpolación lineal." msgid "" "Cubic interpolation. This looks smoother than linear interpolation, but is " "more expensive to interpolate. Stick to [constant INTERPOLATION_LINEAR] for " "complex 3D animations imported from external software, even if it requires " "using a higher animation framerate in return." msgstr "" "Interpolación cúbica. Se ve más suave que la interpolación lineal, pero es " "más costosa de interpolar. Utiliza [constant INTERPOLATION_LINEAR] para " "animaciones 3D complejas importadas de software externo, incluso si a cambio " "requiere usar una mayor velocidad de fotogramas de animación." msgid "" "Linear interpolation with shortest path rotation.\n" "[b]Note:[/b] The result value is always normalized and may not match the key " "value." msgstr "" "Interpolación lineal con rotación de la ruta más corta.\n" "[b]Nota:[/b] El valor resultante siempre está normalizado y puede no " "coincidir con el valor de la clave." msgid "" "Cubic interpolation with shortest path rotation.\n" "[b]Note:[/b] The result value is always normalized and may not match the key " "value." msgstr "" "Interpolación cúbica con rotación de la ruta más corta.\n" "[b]Nota:[/b] El valor resultante siempre está normalizado y puede no " "coincidir con el valor de la clave." msgid "Update between keyframes and hold the value." msgstr "Actualizar entre fotogramas clave y mantener el valor." msgid "Update at the keyframes." msgstr "Actualización de los fotogramas clave." msgid "" "Same as [constant UPDATE_CONTINUOUS] but works as a flag to capture the value " "of the current object and perform interpolation in some methods. See also " "[method AnimationMixer.capture], [member " "AnimationPlayer.playback_auto_capture], and [method " "AnimationPlayer.play_with_capture]." msgstr "" "El mismo que [constant UPDATE_CONTINUOUS], pero funciona como una bandera " "para capturar el valor del objeto actual y realizar la interpolación en " "algunos métodos. Véase también [method AnimationMixer.capture], [member " "AnimationPlayer.playback_auto_capture] y [method " "AnimationPlayer.play_with_capture]." msgid "At both ends of the animation, the animation will stop playing." msgstr "En ambos extremos de la animación, la animación dejará de reproducirse." msgid "" "At both ends of the animation, the animation will be repeated without " "changing the playback direction." msgstr "" "En ambos extremos de la animación, la animación se repetirá sin cambiar la " "dirección de reproducción." msgid "Repeats playback and reverse playback at both ends of the animation." msgstr "" "Repite la reproducción y la reproducción inversa en ambos extremos de la " "animación." msgid "This flag indicates that the animation proceeds without any looping." msgstr "Esta bandera indica que la animación prosigue sin ningún bucle." msgid "" "This flag indicates that the animation has reached the end of the animation " "and just after loop processed." msgstr "" "Esta bandera indica que la animación ha llegado al final de la animación e " "inmediatamente después del bucle procesado." msgid "" "This flag indicates that the animation has reached the start of the animation " "and just after loop processed." msgstr "" "Esta bandera indica que la animación ha llegado al inicio de la animación y " "justo después del bucle procesado." msgid "Finds the nearest time key." msgstr "Encuentra la clave de tiempo más cercana." msgid "Finds only the key with approximating the time." msgstr "Busca solo la clave aproximando el tiempo." msgid "Finds only the key with matching the time." msgstr "Encuentra solo la clave que coincide con el tiempo." msgid "Container for [Animation] resources." msgstr "Contenedor para recursos de [Animation]." msgid "" "An animation library stores a set of animations accessible through " "[StringName] keys, for use with [AnimationPlayer] nodes." msgstr "" "Una biblioteca de animación almacena un conjunto de animaciones accesibles a " "través de claves [StringName], para su uso con los nodos [AnimationPlayer]." msgid "Animation tutorial index" msgstr "Índice de tutoriales de animación" msgid "" "Adds the [param animation] to the library, accessible by the key [param name]." msgstr "" "Añade la animación [param animation] a la biblioteca, accesible por la clave " "[param name]." msgid "" "Returns the [Animation] with the key [param name]. If the animation does not " "exist, [code]null[/code] is returned and an error is logged." msgstr "" "Devuelve la [Animation] con la clave [param name]. Si la animación no existe, " "se devuelve [code]null[/code] y se registra un error." msgid "Returns the keys for the [Animation]s stored in the library." msgstr "Devuelve las claves de las [Animation]s almacenadas en la biblioteca." msgid "Returns the key count for the [Animation]s stored in the library." msgstr "" "Devuelve el número de claves de las [Animation]s almacenadas en la biblioteca." msgid "" "Returns [code]true[/code] if the library stores an [Animation] with [param " "name] as the key." msgstr "" "Devuelve [code]true[/code] si la biblioteca almacena una [Animation] con " "[param name] como clave." msgid "Removes the [Animation] with the key [param name]." msgstr "Elimina la [Animation] con la clave [param name]." msgid "" "Changes the key of the [Animation] associated with the key [param name] to " "[param newname]." msgstr "" "Cambia la clave de la [Animation] asociada a la clave [param name] a [param " "newname]." msgid "Base class for [AnimationPlayer] and [AnimationTree]." msgstr "Clase base para [AnimationPlayer] y [AnimationTree]." msgid "" "Base class for [AnimationPlayer] and [AnimationTree] to manage animation " "lists. It also has general properties and methods for playback and blending.\n" "After instantiating the playback information data within the extended class, " "the blending is processed by the [AnimationMixer]." msgstr "" "Clase base para [AnimationPlayer] y [AnimationTree] para gestionar listas de " "animación. También tiene propiedades y métodos generales para la reproducción " "y la mezcla.\n" "Después de instanciar los datos de información de reproducción dentro de la " "clase extendida, la mezcla es procesada por el [AnimationMixer]." msgid "Migrating Animations from Godot 4.0 to 4.3" msgstr "Migración de Animaciones de Godot 4.0 a 4.3" msgid "A virtual function for processing after getting a key during playback." msgstr "" "Una función virtual para procesar después de obtener una clave durante la " "reproducción." msgid "" "Adds [param library] to the animation player, under the key [param name].\n" "AnimationMixer has a global library by default with an empty string as key. " "For adding an animation to the global library:\n" "[codeblocks]\n" "[gdscript]\n" "var global_library = mixer.get_animation_library(\"\")\n" "global_library.add_animation(\"animation_name\", animation_resource)\n" "[/gdscript]\n" "[/codeblocks]" msgstr "" "Añade [param library] al reproductor de animación, bajo la clave [param " "name].\n" "AnimationMixer tiene una biblioteca global por defecto con una string vacía " "como clave. Para añadir una animación a la biblioteca global:\n" "[codeblocks]\n" "[gdscript]\n" "var global_library = mixer.get_animation_library(\"\")\n" "global_library.add_animation(\"animation_name\", animation_resource)\n" "[/gdscript]\n" "[/codeblocks]" msgid "Manually advance the animations by the specified time (in seconds)." msgstr "" "Avanza manualmente las animaciones en el tiempo especificado (en segundos)." msgid "" "If the animation track specified by [param name] has an option [constant " "Animation.UPDATE_CAPTURE], stores current values of the objects indicated by " "the track path as a cache. If there is already a captured cache, the old " "cache is discarded.\n" "After this it will interpolate with current animation blending result during " "the playback process for the time specified by [param duration], working like " "a crossfade.\n" "You can specify [param trans_type] as the curve for the interpolation. For " "better results, it may be appropriate to specify [constant " "Tween.TRANS_LINEAR] for cases where the first key of the track begins with a " "non-zero value or where the key value does not change, and [constant " "Tween.TRANS_QUAD] for cases where the key value changes linearly." msgstr "" "Si la pista de animación especificada por [param name] tiene una opción " "[constant Animation.UPDATE_CAPTURE], almacena los valores actuales de los " "objetos indicados por la ruta de la pista como una caché. Si ya existe una " "caché capturada, la caché anterior se descarta.\n" "Después de esto, se interpolará con el resultado actual de la mezcla de " "animación durante el proceso de reproducción durante el tiempo especificado " "por [param duration], funcionando como un fundido cruzado.\n" "Puedes especificar [param trans_type] como la curva para la interpolación. " "Para obtener mejores resultados, puede ser apropiado especificar [constant " "Tween.TRANS_LINEAR] para los casos en que la primera clave de la pista " "comience con un valor distinto de cero o donde el valor de la clave no " "cambie, y [constant Tween.TRANS_QUAD] para los casos en que el valor de la " "clave cambie linealmente." msgid "" "[AnimationMixer] caches animated nodes. It may not notice if a node " "disappears; [method clear_caches] forces it to update the cache again." msgstr "" "[AnimationMixer] guarda en caché los nodos animados. Es posible que no note " "si un nodo desaparece; [method clear_caches] fuerza a actualizar la caché de " "nuevo." msgid "" "Returns the key of [param animation] or an empty [StringName] if not found." msgstr "" "Devuelve la clave de [param animation] o un [StringName] vacío si no se " "encuentra." msgid "" "Returns the key for the [AnimationLibrary] that contains [param animation] or " "an empty [StringName] if not found." msgstr "" "Devuelve la clave de la [AnimationLibrary] que contiene [param animation] o " "un [StringName] vacío si no se encuentra." msgid "" "Returns the first [AnimationLibrary] with key [param name] or [code]null[/" "code] if not found.\n" "To get the [AnimationMixer]'s global animation library, use " "[code]get_animation_library(\"\")[/code]." msgstr "" "Devuelve la primera [AnimationLibrary] con la clave [param name] o " "[code]null[/code] si no se encuentra.\n" "Para obtener la biblioteca de animación global de [AnimationMixer], utiliza " "[code]get_animation_library(\"\")[/code]." msgid "Returns the list of stored library keys." msgstr "Devuelve la lista de claves de biblioteca almacenadas." msgid "Returns the list of stored animation keys." msgstr "Devuelve la lista de claves de animación almacenadas." msgid "" "Retrieve the motion delta of position with the [member root_motion_track] as " "a [Vector3] that can be used elsewhere.\n" "If [member root_motion_track] is not a path to a track of type [constant " "Animation.TYPE_POSITION_3D], returns [code]Vector3(0, 0, 0)[/code].\n" "See also [member root_motion_track] and [RootMotionView].\n" "The most basic example is applying position to [CharacterBody3D]:\n" "[codeblocks]\n" "[gdscript]\n" "var current_rotation\n" "\n" "func _process(delta):\n" "\tif Input.is_action_just_pressed(\"animate\"):\n" "\t\tcurrent_rotation = get_quaternion()\n" "\t\tstate_machine.travel(\"Animate\")\n" "\tvar velocity = current_rotation * " "animation_tree.get_root_motion_position() / delta\n" "\tset_velocity(velocity)\n" "\tmove_and_slide()\n" "[/gdscript]\n" "[/codeblocks]\n" "By using this in combination with [method " "get_root_motion_rotation_accumulator], you can apply the root motion position " "more correctly to account for the rotation of the node.\n" "[codeblocks]\n" "[gdscript]\n" "func _process(delta):\n" "\tif Input.is_action_just_pressed(\"animate\"):\n" "\t\tstate_machine.travel(\"Animate\")\n" "\tset_quaternion(get_quaternion() * " "animation_tree.get_root_motion_rotation())\n" "\tvar velocity = " "(animation_tree.get_root_motion_rotation_accumulator().inverse() * " "get_quaternion()) * animation_tree.get_root_motion_position() / delta\n" "\tset_velocity(velocity)\n" "\tmove_and_slide()\n" "[/gdscript]\n" "[/codeblocks]\n" "If [member root_motion_local] is [code]true[/code], returns the pre-" "multiplied translation value with the inverted rotation.\n" "In this case, the code can be written as follows:\n" "[codeblocks]\n" "[gdscript]\n" "func _process(delta):\n" "\tif Input.is_action_just_pressed(\"animate\"):\n" "\t\tstate_machine.travel(\"Animate\")\n" "\tset_quaternion(get_quaternion() * " "animation_tree.get_root_motion_rotation())\n" "\tvar velocity = get_quaternion() * " "animation_tree.get_root_motion_position() / delta\n" "\tset_velocity(velocity)\n" "\tmove_and_slide()\n" "[/gdscript]\n" "[/codeblocks]" msgstr "" "Recupera el delta de movimiento de la posición con la [member " "root_motion_track] como un [Vector3] que puede ser usado en otro lugar.\n" "Si [member root_motion_track] no es una ruta a una pista de tipo [constant " "Animation.TYPE_POSITION_3D], devuelve [code]Vector3(0, 0, 0)[/code].\n" "Véase también [member root_motion_track] y [RootMotionView].\n" "El ejemplo más básico es aplicar la posición a un [CharacterBody3D]:\n" "[codeblocks]\n" "[gdscript]\n" "var current_rotation\n" "\n" "func _process(delta):\n" "\tif Input.is_action_just_pressed(\"animate\"):\n" "\t\tcurrent_rotation = get_quaternion()\n" "\t\tstate_machine.travel(\"Animate\")\n" "\tvar velocity = current_rotation * " "animation_tree.get_root_motion_position() / delta\n" "\tset_velocity(velocity)\n" "\tmove_and_slide()\n" "[/gdscript]\n" "[/codeblocks]\n" "Al usar esto en combinación con [method " "get_root_motion_rotation_accumulator], puedes aplicar la posición del " "movimiento de raíz de forma más correcta para tener en cuenta la rotación del " "nodo.\n" "[codeblocks]\n" "[gdscript]\n" "func _process(delta):\n" "\tif Input.is_action_just_pressed(\"animate\"):\n" "\t\tstate_machine.travel(\"Animate\")\n" "\tset_quaternion(get_quaternion() * " "animation_tree.get_root_motion_rotation())\n" "\tvar velocity = " "(animation_tree.get_root_motion_rotation_accumulator().inverse() * " "get_quaternion()) * animation_tree.get_root_motion_position() / delta\n" "\tset_velocity(velocity)\n" "\tmove_and_slide()\n" "[/gdscript]\n" "[/codeblocks]\n" "Si [member root_motion_local] es [code]true[/code], devuelve el valor de " "traslación pre-multiplicado con la rotación invertida.\n" "En este caso, el código puede escribirse de la siguiente manera:\n" "[codeblocks]\n" "[gdscript]\n" "func _process(delta):\n" "\tif Input.is_action_just_pressed(\"animate\"):\n" "\t\tstate_machine.travel(\"Animate\")\n" "\tset_quaternion(get_quaternion() * " "animation_tree.get_root_motion_rotation())\n" "\tvar velocity = get_quaternion() * " "animation_tree.get_root_motion_position() / delta\n" "\tset_velocity(velocity)\n" "\tmove_and_slide()\n" "[/gdscript]\n" "[/codeblocks]" msgid "" "Retrieve the blended value of the position tracks with the [member " "root_motion_track] as a [Vector3] that can be used elsewhere.\n" "This is useful in cases where you want to respect the initial key values of " "the animation.\n" "For example, if an animation with only one key [code]Vector3(0, 0, 0)[/code] " "is played in the previous frame and then an animation with only one key " "[code]Vector3(1, 0, 1)[/code] is played in the next frame, the difference can " "be calculated as follows:\n" "[codeblocks]\n" "[gdscript]\n" "var prev_root_motion_position_accumulator\n" "\n" "func _process(delta):\n" "\tif Input.is_action_just_pressed(\"animate\"):\n" "\t\tstate_machine.travel(\"Animate\")\n" "\tvar current_root_motion_position_accumulator = " "animation_tree.get_root_motion_position_accumulator()\n" "\tvar difference = current_root_motion_position_accumulator - " "prev_root_motion_position_accumulator\n" "\tprev_root_motion_position_accumulator = " "current_root_motion_position_accumulator\n" "\ttransform.origin += difference\n" "[/gdscript]\n" "[/codeblocks]\n" "However, if the animation loops, an unintended discrete change may occur, so " "this is only useful for some simple use cases." msgstr "" "Recupera el valor combinado de las pistas de posición con [member " "root_motion_track] como un [Vector3] que se puede utilizar en otros lugares.\n" "Esto resulta útil en los casos en los que se desea respetar los valores clave " "iniciales de la animación.\n" "Por ejemplo, si se reproduce una animación con una sola clave " "[code]Vector3(0, 0, 0)[/code] en el fotograma anterior y luego se reproduce " "una animación con una sola clave [code]Vector3(1, 0, 1)[/code] en el " "fotograma siguiente, la diferencia se puede calcular de la siguiente manera:\n" "[codeblocks]\n" "[gdscript]\n" "var prev_root_motion_position_accumulator\n" "\n" "func _process(delta):\n" "\tif Input.is_action_just_pressed(\"animate\"):\n" "\t\tstate_machine.travel(\"Animate\")\n" "\tvar current_root_motion_position_accumulator = " "animation_tree.get_root_motion_position_accumulator()\n" "\tvar difference = current_root_motion_position_accumulator - " "prev_root_motion_position_accumulator\n" "\tprev_root_motion_position_accumulator = " "current_root_motion_position_accumulator\n" "\ttransform.origin += difference\n" "[/gdscript]\n" "[/codeblocks]\n" "Sin embargo, si la animación se repite, puede producirse un cambio discreto " "no deseado, por lo que solo resulta útil para algunos casos de uso sencillos." msgid "" "Retrieve the motion delta of rotation with the [member root_motion_track] as " "a [Quaternion] that can be used elsewhere.\n" "If [member root_motion_track] is not a path to a track of type [constant " "Animation.TYPE_ROTATION_3D], returns [code]Quaternion(0, 0, 0, 1)[/code].\n" "See also [member root_motion_track] and [RootMotionView].\n" "The most basic example is applying rotation to [CharacterBody3D]:\n" "[codeblocks]\n" "[gdscript]\n" "func _process(delta):\n" "\tif Input.is_action_just_pressed(\"animate\"):\n" "\t\tstate_machine.travel(\"Animate\")\n" "\tset_quaternion(get_quaternion() * " "animation_tree.get_root_motion_rotation())\n" "[/gdscript]\n" "[/codeblocks]" msgstr "" "Recupera el delta de movimiento de rotación con [member root_motion_track] " "como un [Quaternion] que puede ser usado en otro lugar.\n" "Si [member root_motion_track] no es una ruta a una pista de tipo [constant " "Animation.TYPE_ROTATION_3D], devuelve [code]Quaternion(0, 0, 0, 1)[/code].\n" "Véase también [member root_motion_track] y [RootMotionView].\n" "El ejemplo más básico es aplicar la rotación a [CharacterBody3D]:\n" "[codeblocks]\n" "[gdscript]\n" "func _process(delta):\n" "\tif Input.is_action_just_pressed(\"animate\"):\n" "\t\tstate_machine.travel(\"Animate\")\n" "\tset_quaternion(get_quaternion() * " "animation_tree.get_root_motion_rotation())\n" "[/gdscript]\n" "[/codeblocks]" msgid "" "Retrieve the blended value of the rotation tracks with the [member " "root_motion_track] as a [Quaternion] that can be used elsewhere.\n" "This is necessary to apply the root motion position correctly, taking " "rotation into account. See also [method get_root_motion_position].\n" "Also, this is useful in cases where you want to respect the initial key " "values of the animation.\n" "For example, if an animation with only one key [code]Quaternion(0, 0, 0, 1)[/" "code] is played in the previous frame and then an animation with only one key " "[code]Quaternion(0, 0.707, 0, 0.707)[/code] is played in the next frame, the " "difference can be calculated as follows:\n" "[codeblocks]\n" "[gdscript]\n" "var prev_root_motion_rotation_accumulator\n" "\n" "func _process(delta):\n" "\tif Input.is_action_just_pressed(\"animate\"):\n" "\t\tstate_machine.travel(\"Animate\")\n" "\tvar current_root_motion_rotation_accumulator = " "animation_tree.get_root_motion_rotation_accumulator()\n" "\tvar difference = prev_root_motion_rotation_accumulator.inverse() * " "current_root_motion_rotation_accumulator\n" "\tprev_root_motion_rotation_accumulator = " "current_root_motion_rotation_accumulator\n" "\ttransform.basis *= Basis(difference)\n" "[/gdscript]\n" "[/codeblocks]\n" "However, if the animation loops, an unintended discrete change may occur, so " "this is only useful for some simple use cases." msgstr "" "Recupera el valor combinado de las pistas de rotación con [member " "root_motion_track] como un [Quaternion] que se puede utilizar en otros " "lugares.\n" "Esto es necesario para aplicar correctamente la posición del movimiento raíz, " "teniendo en cuenta la rotación. Véase también [method " "get_root_motion_position].\n" "Además, esto es útil en los casos en los que se desea respetar los valores " "clave iniciales de la animación.\n" "Por ejemplo, si se reproduce una animación con una sola clave " "[code]Quaternion(0, 0, 0, 1)[/code] en el fotograma anterior y luego se " "reproduce una animación con una sola clave [code]Quaternion(0, 0.707, 0, " "0.707)[/code] en el fotograma siguiente, la diferencia se puede calcular de " "la siguiente manera:\n" "[codeblocks]\n" "[gdscript]\n" "var prev_root_motion_rotation_accumulator\n" "\n" "func _process(delta):\n" "\tif Input.is_action_just_pressed(\"animate\"):\n" "\t\tstate_machine.travel(\"Animate\")\n" "\tvar current_root_motion_rotation_accumulator = " "animation_tree.get_root_motion_rotation_accumulator()\n" "\tvar difference = prev_root_motion_rotation_accumulator.inverse() * " "current_root_motion_rotation_accumulator\n" "\tprev_root_motion_rotation_accumulator = " "current_root_motion_rotation_accumulator\n" "\ttransform.basis *= Basis(difference)\n" "[/gdscript]\n" "[/codeblocks]\n" "Sin embargo, si la animación se repite, puede producirse un cambio discreto " "no deseado, por lo que solo es útil para algunos casos de uso sencillos." msgid "" "Retrieve the motion delta of scale with the [member root_motion_track] as a " "[Vector3] that can be used elsewhere.\n" "If [member root_motion_track] is not a path to a track of type [constant " "Animation.TYPE_SCALE_3D], returns [code]Vector3(0, 0, 0)[/code].\n" "See also [member root_motion_track] and [RootMotionView].\n" "The most basic example is applying scale to [CharacterBody3D]:\n" "[codeblocks]\n" "[gdscript]\n" "var current_scale = Vector3(1, 1, 1)\n" "var scale_accum = Vector3(1, 1, 1)\n" "\n" "func _process(delta):\n" "\tif Input.is_action_just_pressed(\"animate\"):\n" "\t\tcurrent_scale = get_scale()\n" "\t\tscale_accum = Vector3(1, 1, 1)\n" "\t\tstate_machine.travel(\"Animate\")\n" "\tscale_accum += animation_tree.get_root_motion_scale()\n" "\tset_scale(current_scale * scale_accum)\n" "[/gdscript]\n" "[/codeblocks]" msgstr "" "Recupera el delta de movimiento de la escala con [member root_motion_track] " "como un [Vector3] que puede ser usado en otro lugar.\n" "Si [member root_motion_track] no es una ruta a una pista de tipo [constant " "Animation.TYPE_SCALE_3D], devuelve [code]Vector3(0, 0, 0)[/code].\n" "Véase también [member root_motion_track] y [RootMotionView].\n" "El ejemplo más básico es aplicar la escala a [CharacterBody3D]:\n" "[codeblocks]\n" "[gdscript]\n" "var current_scale = Vector3(1, 1, 1)\n" "var scale_accum = Vector3(1, 1, 1)\n" "\n" "func _process(delta):\n" "\tif Input.is_action_just_pressed(\"animate\"):\n" "\t\tcurrent_scale = get_scale()\n" "\t\tscale_accum = Vector3(1, 1, 1)\n" "\t\tstate_machine.travel(\"Animate\")\n" "\tscale_accum += animation_tree.get_root_motion_scale()\n" "\tset_scale(current_scale * scale_accum)\n" "[/gdscript]\n" "[/codeblocks]" msgid "" "Retrieve the blended value of the scale tracks with the [member " "root_motion_track] as a [Vector3] that can be used elsewhere.\n" "For example, if an animation with only one key [code]Vector3(1, 1, 1)[/code] " "is played in the previous frame and then an animation with only one key " "[code]Vector3(2, 2, 2)[/code] is played in the next frame, the difference can " "be calculated as follows:\n" "[codeblocks]\n" "[gdscript]\n" "var prev_root_motion_scale_accumulator\n" "\n" "func _process(delta):\n" "\tif Input.is_action_just_pressed(\"animate\"):\n" "\t\tstate_machine.travel(\"Animate\")\n" "\tvar current_root_motion_scale_accumulator = " "animation_tree.get_root_motion_scale_accumulator()\n" "\tvar difference = current_root_motion_scale_accumulator - " "prev_root_motion_scale_accumulator\n" "\tprev_root_motion_scale_accumulator = current_root_motion_scale_accumulator\n" "\ttransform.basis = transform.basis.scaled(difference)\n" "[/gdscript]\n" "[/codeblocks]\n" "However, if the animation loops, an unintended discrete change may occur, so " "this is only useful for some simple use cases." msgstr "" "Recupera el valor combinado de las pistas de escala con [member " "root_motion_track] como un [Vector3] que se puede utilizar en otros lugares.\n" "Por ejemplo, si se reproduce una animación con una sola clave " "[code]Vector3(1, 1, 1)[/code] en el fotograma anterior y, a continuación, se " "reproduce una animación con una sola clave [code]Vector3(2, 2, 2)[/code] en " "el siguiente fotograma, la diferencia se puede calcular de la siguiente " "manera:\n" "[codeblocks]\n" "[gdscript]\n" "var prev_root_motion_scale_accumulator\n" "\n" "func _process(delta):\n" "\tif Input.is_action_just_pressed(\"animate\"):\n" "\t\tstate_machine.travel(\"Animate\")\n" "\tvar current_root_motion_scale_accumulator = " "animation_tree.get_root_motion_scale_accumulator()\n" "\tvar difference = current_root_motion_scale_accumulator - " "prev_root_motion_scale_accumulator\n" "\tprev_root_motion_scale_accumulator = current_root_motion_scale_accumulator\n" "\ttransform.basis = transform.basis.scaled(difference)\n" "[/gdscript]\n" "[/codeblocks]\n" "Sin embargo, si la animación se repite, puede producirse un cambio discreto " "no deseado, por lo que solo resulta útil para algunos casos de uso sencillos." msgid "" "Returns [code]true[/code] if the [AnimationMixer] stores an [Animation] with " "key [param name]." msgstr "" "Devuelve [code]true[/code] si el [AnimationMixer] almacena una [Animation] " "con la clave [param name]." msgid "" "Returns [code]true[/code] if the [AnimationMixer] stores an " "[AnimationLibrary] with key [param name]." msgstr "" "Devuelve [code]true[/code] si el [AnimationMixer] almacena una " "[AnimationLibrary] con la clave [param name]." msgid "Removes the [AnimationLibrary] associated with the key [param name]." msgstr "Elimina la [AnimationLibrary] asociada con la clave [param name]." msgid "" "Moves the [AnimationLibrary] associated with the key [param name] to the key " "[param newname]." msgstr "" "Mueve la [AnimationLibrary] asociada con la clave [param name] a la clave " "[param newname]." msgid "If [code]true[/code], the [AnimationMixer] will be processing." msgstr "Si es [code]true[/code], el [AnimationMixer] estará procesando." msgid "" "The number of possible simultaneous sounds for each of the assigned " "AudioStreamPlayers.\n" "For example, if this value is [code]32[/code] and the animation has two audio " "tracks, the two [AudioStreamPlayer]s assigned can play simultaneously up to " "[code]32[/code] voices each." msgstr "" "El número de sonidos simultáneos posibles para cada uno de los " "AudioStreamPlayers asignados.\n" "Por ejemplo, si este valor es [code]32[/code] y la animación tiene dos pistas " "de audio, los dos [AudioStreamPlayer] asignados pueden reproducir " "simultáneamente hasta [code]32[/code] voces cada uno." msgid "" "Ordinarily, tracks can be set to [constant Animation.UPDATE_DISCRETE] to " "update infrequently, usually when using nearest interpolation.\n" "However, when blending with [constant Animation.UPDATE_CONTINUOUS] several " "results are considered. The [member callback_mode_discrete] specify it " "explicitly. See also [enum AnimationCallbackModeDiscrete].\n" "To make the blended results look good, it is recommended to set this to " "[constant ANIMATION_CALLBACK_MODE_DISCRETE_FORCE_CONTINUOUS] to update every " "frame during blending. Other values exist for compatibility and they are fine " "if there is no blending, but not so, may produce artifacts." msgstr "" "Normalmente, las pistas se pueden configurar en [constant " "Animation.UPDATE_DISCRETE] para actualizarse con poca frecuencia, normalmente " "cuando se utiliza la interpolación más cercana.\n" "Sin embargo, al mezclar con [constant Animation.UPDATE_CONTINUOUS] se tienen " "en cuenta varios resultados. El [member callback_mode_discrete] lo especifica " "explícitamente. Véase también [enum AnimationCallbackModeDiscrete].\n" "Para que los resultados mezclados se vean bien, se recomienda establecerlo en " "[constant ANIMATION_CALLBACK_MODE_DISCRETE_FORCE_CONTINUOUS] para actualizar " "cada fotograma durante la mezcla. Existen otros valores por motivos de " "compatibilidad y están bien si no hay mezcla, pero si no es así, pueden " "producir artefactos." msgid "The call mode used for \"Call Method\" tracks." msgstr "El modo de llamada a utilizar para las pistas \"Call Method\"." msgid "The process notification in which to update animations." msgstr "La notificación de proceso en la que se actualizan las animaciones." msgid "" "If [code]true[/code], the blending uses the deterministic algorithm. The " "total weight is not normalized and the result is accumulated with an initial " "value ([code]0[/code] or a [code]\"RESET\"[/code] animation if present).\n" "This means that if the total amount of blending is [code]0.0[/code], the " "result is equal to the [code]\"RESET\"[/code] animation.\n" "If the number of tracks between the blended animations is different, the " "animation with the missing track is treated as if it had the initial value.\n" "If [code]false[/code], The blend does not use the deterministic algorithm. " "The total weight is normalized and always [code]1.0[/code]. If the number of " "tracks between the blended animations is different, nothing is done about the " "animation that is missing a track.\n" "[b]Note:[/b] In [AnimationTree], the blending with [AnimationNodeAdd2], " "[AnimationNodeAdd3], [AnimationNodeSub2] or the weight greater than " "[code]1.0[/code] may produce unexpected results.\n" "For example, if [AnimationNodeAdd2] blends two nodes with the amount " "[code]1.0[/code], then total weight is [code]2.0[/code] but it will be " "normalized to make the total amount [code]1.0[/code] and the result will be " "equal to [AnimationNodeBlend2] with the amount [code]0.5[/code]." msgstr "" "Si es [code]true[/code], la mezcla utiliza el algoritmo determinista. El peso " "total no se normaliza y el resultado se acumula con un valor inicial " "([code]0[/code] o una animación [code]\"RESET\"[/code] si está presente).\n" "Esto significa que si la cantidad total de mezcla es [code]0.0[/code], el " "resultado es igual a la animación [code]\"RESET\"[/code].\n" "Si el número de pistas entre las animaciones mezcladas es diferente, la " "animación con la pista que falta se trata como si tuviera el valor inicial.\n" "Si es [code]false[/code], la mezcla no utiliza el algoritmo determinista. El " "peso total se normaliza y siempre es [code]1.0[/code]. Si el número de pistas " "entre las animaciones mezcladas es diferente, no se hace nada con la " "animación a la que le falta una pista.\n" "[b]Nota:[/b] En [AnimationTree], la mezcla con [AnimationNodeAdd2], " "[AnimationNodeAdd3], [AnimationNodeSub2] o el peso mayor que [code]1.0[/code] " "puede producir resultados inesperados.\n" "Por ejemplo, si [AnimationNodeAdd2] mezcla dos nodos con la cantidad " "[code]1.0[/code], entonces el peso total es [code]2.0[/code], pero se " "normalizará para que la cantidad total sea [code]1.0[/code] y el resultado " "será igual a [AnimationNodeBlend2] con la cantidad [code]0.5[/code]." msgid "" "This is used by the editor. If set to [code]true[/code], the scene will be " "saved with the effects of the reset animation (the animation with the key " "[code]\"RESET\"[/code]) applied as if it had been seeked to time 0, with the " "editor keeping the values that the scene had before saving.\n" "This makes it more convenient to preview and edit animations in the editor, " "as changes to the scene will not be saved as long as they are set in the " "reset animation." msgstr "" "Esto lo utiliza el editor. Si se establece en [code]true[/code], la escena se " "guardará con los efectos de la animación de reinicio (la animación con la " "clave [code]\"RESET\"[/code]) aplicada como si se hubiera buscado hasta el " "tiempo 0, y el editor conservará los valores que la escena tenía antes de " "guardar.\n" "Esto hace que sea más conveniente previsualizar y editar animaciones en el " "editor, ya que los cambios en la escena no se guardarán mientras estén " "establecidos en la animación de reinicio." msgid "" "If [code]true[/code], [method get_root_motion_position] value is extracted as " "a local translation value before blending. In other words, it is treated like " "the translation is done after the rotation." msgstr "" "Si es [code]true[/code], el valor de [method get_root_motion_position] se " "extrae como un valor de traslación local antes de la mezcla. En otras " "palabras, se trata como si la traslación se hiciera después de la rotación." msgid "" "The path to the Animation track used for root motion. Paths must be valid " "scene-tree paths to a node, and must be specified starting from the parent " "node of the node that will reproduce the animation. The [member " "root_motion_track] uses the same format as [method Animation.track_set_path], " "but note that a bone must be specified.\n" "If the track has type [constant Animation.TYPE_POSITION_3D], [constant " "Animation.TYPE_ROTATION_3D], or [constant Animation.TYPE_SCALE_3D] the " "transformation will be canceled visually, and the animation will appear to " "stay in place. See also [method get_root_motion_position], [method " "get_root_motion_rotation], [method get_root_motion_scale], and " "[RootMotionView]." msgstr "" "La ruta de la pista de Animación utilizada para el movimiento raíz. Las rutas " "deben ser rutas validas, escena-árbol hacia un nodo, y deben especificarse " "empezando por el nodo padre del nodo que reproducirá la animación. [member " "root_motion_track] utiliza el mismo formato que [method " "Animation.track_set_path], pero ten en cuenta que un hueso debe ser " "especificado.\n" "Si la pista tiene tipo [constant Animation.TYPE_POSITION_3D], [constant " "Animation.TYPE_ROTATION_3D], o [constant Animation.TYPE_SCALE_3D] la " "transformación se cancelará visualmente, y la animación aparentará estar " "estática. Véase [method get_root_motion_position], [method " "get_root_motion_rotation], [method get_root_motion_scale], y [RootMotionView]." msgid "The node which node path references will travel from." msgstr "El nodo desde el cual viajarán las referencias de la ruta del nodo." msgid "" "Notifies when an animation finished playing.\n" "[b]Note:[/b] This signal is not emitted if an animation is looping." msgstr "" "Notifica cuando una animación ha terminado de reproducirse.\n" "[b]Nota:[/b] Esta señal no se emite si una animación está en bucle." msgid "Notifies when the animation libraries have changed." msgstr "Notifica cuando las bibliotecas de animación han cambiado." msgid "Notifies when an animation list is changed." msgstr "Notifica cuando una lista de animación cambia." msgid "" "Notifies when an animation starts playing.\n" "[b]Note:[/b] This signal is not emitted if an animation is looping." msgstr "" "Notifica cuando una animación comienza a reproducirse.\n" "[b]Nota:[/b] Esta señal no se emite si una animación está en bucle." msgid "" "Notifies when the caches have been cleared, either automatically, or manually " "via [method clear_caches]." msgstr "" "Notifica cuando las cachés se han limpiado, ya sea automáticamente o " "manualmente a través del [method clear_caches]." msgid "" "Notifies when the blending result related have been applied to the target " "objects." msgstr "" "Notifica cuando el resultado de la mezcla se ha aplicado a los objetos de " "destino." msgid "Notifies when the property related process have been updated." msgstr "" "Notifica cuando se han actualizado los procesos relacionados con la propiedad." msgid "" "Process animation during physics frames (see [constant " "Node.NOTIFICATION_INTERNAL_PHYSICS_PROCESS]). This is especially useful when " "animating physics bodies." msgstr "" "Procesa la animación durante los frames de física (véase [constant " "Node.NOTIFICATION_INTERNAL_PHYSICS_PROCESS]). Esto es especialmente útil " "cuando se animan cuerpos físicos." msgid "" "Process animation during process frames (see [constant " "Node.NOTIFICATION_INTERNAL_PROCESS])." msgstr "" "Procesa la animación durante los frames de proceso (véase [constant " "Node.NOTIFICATION_INTERNAL_PROCESS])." msgid "" "Do not process animation. Use [method advance] to process the animation " "manually." msgstr "" "No procesar la animación. Utiliza [method advance] para procesar la animación " "manualmente." msgid "" "Batch method calls during the animation process, then do the calls after " "events are processed. This avoids bugs involving deleting nodes or modifying " "the AnimationPlayer while playing." msgstr "" "Metodos de procesos por lotes llamados durante el proceso de animación, y " "despues que los eventos son procesados hacer los llamados. Esto evita los " "errores que implican borrar nodos o modificar el AnimationPlayer mientras se " "está reproduciendo." msgid "Make method calls immediately when reached in the animation." msgstr "" "Hace llamadas a método inmediatamente cuando se alcanza en la animación." msgid "" "An [constant Animation.UPDATE_DISCRETE] track value takes precedence when " "blending [constant Animation.UPDATE_CONTINUOUS] or [constant " "Animation.UPDATE_CAPTURE] track values and [constant " "Animation.UPDATE_DISCRETE] track values." msgstr "" "Un valor de pista [constant Animation.UPDATE_DISCRETE] tiene prioridad al " "mezclar valores de pista [constant Animation.UPDATE_CONTINUOUS] o [constant " "Animation.UPDATE_CAPTURE] y valores de pista [constant " "Animation.UPDATE_DISCRETE]." msgid "" "An [constant Animation.UPDATE_CONTINUOUS] or [constant " "Animation.UPDATE_CAPTURE] track value takes precedence when blending the " "[constant Animation.UPDATE_CONTINUOUS] or [constant Animation.UPDATE_CAPTURE] " "track values and the [constant Animation.UPDATE_DISCRETE] track values. This " "is the default behavior for [AnimationPlayer]." msgstr "" "Un valor de pista [constant Animation.UPDATE_CONTINUOUS] o [constant " "Animation.UPDATE_CAPTURE] tiene prioridad al mezclar los valores de pista " "[constant Animation.UPDATE_CONTINUOUS] o [constant Animation.UPDATE_CAPTURE] " "y los valores de pista [constant Animation.UPDATE_DISCRETE]. Este es el " "comportamiento predeterminado para [AnimationPlayer]." msgid "" "Always treat the [constant Animation.UPDATE_DISCRETE] track value as " "[constant Animation.UPDATE_CONTINUOUS] with [constant " "Animation.INTERPOLATION_NEAREST]. This is the default behavior for " "[AnimationTree].\n" "If a value track has un-interpolatable type key values, it is internally " "converted to use [constant ANIMATION_CALLBACK_MODE_DISCRETE_RECESSIVE] with " "[constant Animation.UPDATE_DISCRETE].\n" "Un-interpolatable type list:\n" "- [constant @GlobalScope.TYPE_NIL]\n" "- [constant @GlobalScope.TYPE_NODE_PATH]\n" "- [constant @GlobalScope.TYPE_RID]\n" "- [constant @GlobalScope.TYPE_OBJECT]\n" "- [constant @GlobalScope.TYPE_CALLABLE]\n" "- [constant @GlobalScope.TYPE_SIGNAL]\n" "- [constant @GlobalScope.TYPE_DICTIONARY]\n" "- [constant @GlobalScope.TYPE_PACKED_BYTE_ARRAY]\n" "[constant @GlobalScope.TYPE_BOOL] and [constant @GlobalScope.TYPE_INT] are " "treated as [constant @GlobalScope.TYPE_FLOAT] during blending and rounded " "when the result is retrieved.\n" "It is same for arrays and vectors with them such as [constant " "@GlobalScope.TYPE_PACKED_INT32_ARRAY] or [constant " "@GlobalScope.TYPE_VECTOR2I], they are treated as [constant " "@GlobalScope.TYPE_PACKED_FLOAT32_ARRAY] or [constant " "@GlobalScope.TYPE_VECTOR2]. Also note that for arrays, the size is also " "interpolated.\n" "[constant @GlobalScope.TYPE_STRING] and [constant " "@GlobalScope.TYPE_STRING_NAME] are interpolated between character codes and " "lengths, but note that there is a difference in algorithm between " "interpolation between keys and interpolation by blending." msgstr "" "Trata siempre el valor de la pista [constant Animation.UPDATE_DISCRETE] como " "[constant Animation.UPDATE_CONTINUOUS] con [constant " "Animation.INTERPOLATION_NEAREST]. Este es el comportamiento predeterminado " "para [AnimationTree].\n" "Si una pista de valores tiene valores clave de tipo no interpolables, se " "convierte internamente para utilizar [constant " "ANIMATION_CALLBACK_MODE_DISCRETE_RECESSIVE] con [constant " "Animation.UPDATE_DISCRETE].\n" "Lista de tipos no interpolables:\n" "- [constant @GlobalScope.TYPE_NIL]\n" "- [constant @GlobalScope.TYPE_NODE_PATH]\n" "- [constant @GlobalScope.TYPE_RID]\n" "- [constant @GlobalScope.TYPE_OBJECT]\n" "- [constant @GlobalScope.TYPE_CALLABLE]\n" "- [constant @GlobalScope.TYPE_SIGNAL]\n" "- [constant @GlobalScope.TYPE_DICTIONARY]\n" "- [constant @GlobalScope.TYPE_PACKED_BYTE_ARRAY]\n" "[constant @GlobalScope.TYPE_BOOL] y [constant @GlobalScope.TYPE_INT] se " "tratan como [constant @GlobalScope.TYPE_FLOAT] durante la combinación y se " "redondean cuando se recupera el resultado.\n" "Lo mismo ocurre con las matrices y vectores que las contienen, como [constant " "@GlobalScope.TYPE_PACKED_INT32_ARRAY] o [constant " "@GlobalScope.TYPE_VECTOR2I], se tratan como [constant " "@GlobalScope.TYPE_PACKED_FLOAT32_ARRAY] o [constant " "@GlobalScope.TYPE_VECTOR2]. Ten en cuenta también que, en el caso de las " "matrices, el tamaño también se interpola.\n" "[constant @GlobalScope.TYPE_STRING] y [constant " "@GlobalScope.TYPE_STRING_NAME] se interpolan entre códigos de caracteres y " "longitudes, pero ten en cuenta que hay una diferencia en el algoritmo entre " "la interpolación entre claves y la interpolación por mezcla." msgid "Base class for [AnimationTree] nodes. Not related to scene nodes." msgstr "" "Clase base para los nodos [AnimationTree]. No está relacionado con los nodos " "de escena." msgid "" "Base resource for [AnimationTree] nodes. In general, it's not used directly, " "but you can create custom ones with custom blending formulas.\n" "Inherit this when creating animation nodes mainly for use in " "[AnimationNodeBlendTree], otherwise [AnimationRootNode] should be used " "instead.\n" "You can access the time information as read-only parameter which is processed " "and stored in the previous frame for all nodes except [AnimationNodeOutput].\n" "[b]Note:[/b] If multiple inputs exist in the [AnimationNode], which time " "information takes precedence depends on the type of [AnimationNode].\n" "[codeblock]\n" "var current_length = $AnimationTree[\"parameters/AnimationNodeName/" "current_length\"]\n" "var current_position = $AnimationTree[\"parameters/AnimationNodeName/" "current_position\"]\n" "var current_delta = $AnimationTree[\"parameters/AnimationNodeName/" "current_delta\"]\n" "[/codeblock]" msgstr "" "Recurso base para los nodos [AnimationTree]. En general, no se utiliza " "directamente, pero se pueden crear otros personalizados con fórmulas de " "mezcla personalizadas.\n" "Heredar esto al crear nodos de animación principalmente para su uso en " "[AnimationNodeBlendTree]; de lo contrario, se debe utilizar " "[AnimationRootNode] en su lugar.\n" "Se puede acceder a la información de tiempo como parámetro de solo lectura " "que se procesa y almacena en el fotograma anterior para todos los nodos " "excepto [AnimationNodeOutput].\n" "[b]Nota:[/b] Si existen varias entradas en [AnimationNode], la información de " "tiempo que tiene prioridad depende del tipo de [AnimationNode].\n" "[codeblock]\n" "var current_length = $AnimationTree[\"parameters/AnimationNodeName/" "current_length\"]\n" "var current_position = $AnimationTree[\"parameters/AnimationNodeName/" "current_position\"]\n" "var current_delta = $AnimationTree[\"parameters/AnimationNodeName/" "current_delta\"]\n" "[/codeblock]" msgid "Using AnimationTree" msgstr "Usando AnimationTree" msgid "" "When inheriting from [AnimationRootNode], implement this virtual method to " "override the text caption for this animation node." msgstr "" "Al heredar de [AnimationRootNode], implementa este método virtual para " "sobrescribir el título de texto para este nodo de animación." msgid "" "When inheriting from [AnimationRootNode], implement this virtual method to " "return a child animation node by its [param name]." msgstr "" "Al heredar de [AnimationRootNode], implementa este método virtual para " "devolver un nodo de animación hijo por su [param name]." msgid "" "When inheriting from [AnimationRootNode], implement this virtual method to " "return all child animation nodes in order as a [code]name: node[/code] " "dictionary." msgstr "" "Al heredar de [AnimationRootNode], implementa este método virtual para " "devolver todos los nodos de animación secundarios en orden como un " "diccionario [code]name: node[/code]." msgid "" "When inheriting from [AnimationRootNode], implement this virtual method to " "return the default value of a [param parameter]. Parameters are custom local " "memory used for your animation nodes, given a resource can be reused in " "multiple trees." msgstr "" "Al heredar de [AnimationRootNode], implementa este método virtual para " "devolver el valor predeterminado de un [param parameter]. Los parámetros son " "memoria local personalizada utilizada para tus nodos de animación, dado que " "un recurso puede ser reutilizado en múltiples árboles." msgid "" "When inheriting from [AnimationRootNode], implement this virtual method to " "return a list of the properties on this animation node. Parameters are custom " "local memory used for your animation nodes, given a resource can be reused in " "multiple trees. Format is similar to [method Object.get_property_list]." msgstr "" "Al heredar de [AnimationRootNode], implementa este método virtual para " "devolver una lista de las propiedades de este nodo de animación. Los " "parámetros son memoria local personalizada utilizada para los nodos de " "animación; dado que un recurso puede reutilizarse en varios árboles, el " "formato es similar al de [method Object.get_property_list]." msgid "" "When inheriting from [AnimationRootNode], implement this virtual method to " "return whether the blend tree editor should display filter editing on this " "animation node." msgstr "" "Al heredar de [AnimationRootNode], implementa este método virtual para " "determinar si el editor del árbol de mezcla debe mostrar la edición de filtro " "en este nodo de animación." msgid "" "When inheriting from [AnimationRootNode], implement this virtual method to " "return whether the [param parameter] is read-only. Parameters are custom " "local memory used for your animation nodes, given a resource can be reused in " "multiple trees." msgstr "" "Al heredar de [AnimationRootNode], implementa este método virtual para " "indicar si [param parameter] es de solo lectura. Los parámetros son memoria " "local personalizada que se utiliza para los nodos de animación, dado que un " "recurso puede reutilizarse en varios árboles." msgid "" "Currently this is mostly useless as there is a lack of many APIs to extend " "AnimationNode by GDScript. It is planned that a more flexible API using " "structures will be provided in the future." msgstr "" "Actualmente esto es prácticamente inútil, ya que faltan muchas API para " "ampliar AnimationNode mediante GDScript. Está previsto que en el futuro se " "proporcione una API más flexible que utilice estructuras." msgid "" "When inheriting from [AnimationRootNode], implement this virtual method to " "run some code when this animation node is processed. The [param time] " "parameter is a relative delta, unless [param seek] is [code]true[/code], in " "which case it is absolute.\n" "Here, call the [method blend_input], [method blend_node] or [method " "blend_animation] functions. You can also use [method get_parameter] and " "[method set_parameter] to modify local memory.\n" "This function should return the delta." msgstr "" "Al heredar de [AnimationRootNode], implemente este método virtual para " "ejecutar algún código cuando se procese este nodo de animación. El parámetro " "[param time] es un delta relativo, a menos que [param seek] sea [code]true[/" "code], en cuyo caso es absoluto.\n" "Aquí, llame a las funciones [method blend_input], [method blend_node] o " "[method blend_animation]. También puede usar [method get_parameter] y [method " "set_parameter] para modificar la memoria local.\n" "Esta función debe devolver el delta." msgid "" "Adds an input to the animation node. This is only useful for animation nodes " "created for use in an [AnimationNodeBlendTree]. If the addition fails, " "returns [code]false[/code]." msgstr "" "Añade una entrada al nodo de animación. Esto solo es útil para nodos de " "animación creados para usarse en un [AnimationNodeBlendTree]. Si la adición " "falla, devuelve [code]false[/code]." msgid "" "Blends an animation by [param blend] amount (name must be valid in the linked " "[AnimationPlayer]). A [param time] and [param delta] may be passed, as well " "as whether [param seeked] happened.\n" "A [param looped_flag] is used by internal processing immediately after the " "loop." msgstr "" "Mezcla una animación por la cantidad [param blend] (el nombre debe ser válido " "en el [AnimationPlayer] vinculado). Se pueden pasar [param time] y [param " "delta], así como si se produjo [param seeked].\n" "Un [param looped_flag] se utiliza para el procesamiento interno " "inmediatamente después del bucle." msgid "" "Blends an input. This is only useful for animation nodes created for an " "[AnimationNodeBlendTree]. The [param time] parameter is a relative delta, " "unless [param seek] is [code]true[/code], in which case it is absolute. A " "filter mode may be optionally passed." msgstr "" "Mezcla una entrada. Esto sólo es útil para los nodos creados para un " "[AnimationNodeBlendTree]. El parametro [param time] es un delta relativo, a " "menos que [param seek] sea [code]true[/code], en cuyo caso es absoluto. Se " "puede pasar opcionalmente a un modo de filtro." msgid "" "Blend another animation node (in case this animation node contains child " "animation nodes). This function is only useful if you inherit from " "[AnimationRootNode] instead, otherwise editors will not display your " "animation node for addition." msgstr "" "Mezcla otro nodo de animación (en caso de que este nodo contenga nodos hijos " "de animación). Esta función es útil sólo si hereda de [AnimationRootNode] En " "cambio, de lo contrario, los editores no mostrarán su nodo de animación para " "su adición." msgid "" "Returns the input index which corresponds to [param name]. If not found, " "returns [code]-1[/code]." msgstr "" "Devuelve el índice de entrada que corresponde a [param name]. Si no se " "encuentra, devuelve [code]-1[/code]." msgid "" "Amount of inputs in this animation node, only useful for animation nodes that " "go into [AnimationNodeBlendTree]." msgstr "" "Cantidad de entradas en este nodo de animación, solo útil para los nodos de " "animación que van a [AnimationNodeBlendTree]." msgid "Gets the name of an input by index." msgstr "Obtiene el nombre de una entrada por índice." msgid "" "Gets the value of a parameter. Parameters are custom local memory used for " "your animation nodes, given a resource can be reused in multiple trees." msgstr "" "Obtiene el valor de un parámetro. Los parámetros son memoria local " "personalizada que se utiliza para los nodos de animación. Dado que un recurso " "puede reutilizarse en varios árboles, se puede obtener un valor." msgid "" "Returns the object id of the [AnimationTree] that owns this node.\n" "[b]Note:[/b] This method should only be called from within the [method " "AnimationNodeExtension._process_animation_node] method, and will return an " "invalid id otherwise." msgstr "" "Devuelve el ID de objeto del [AnimationTree] propietario de este nodo.\n" "[b]Nota:[/b] Este método solo debe llamarse desde dentro del método [method " "AnimationNodeExtension._process_animation_node] y, en caso contrario, " "devolverá un ID no válido." msgid "Returns [code]true[/code] if the given path is filtered." msgstr "Devuelve [code]true[/code] si la ruta dada es filtrada." msgid "" "Returns [code]true[/code] if this animation node is being processed in test-" "only mode." msgstr "" "Devuelve [code]true[/code] si este nodo de animación se está procesando en " "modo de solo prueba." msgid "Removes an input, call this only when inactive." msgstr "Elimina una entrada, llama a esto sólo cuando está inactivo." msgid "Adds or removes a path for the filter." msgstr "Añade o elimina una ruta para el filtro." msgid "" "Sets the name of the input at the given [param input] index. If the setting " "fails, returns [code]false[/code]." msgstr "" "Establece el nombre de la entrada en el índice [param input] especificado. Si " "la configuración falla, devuelve [code]false[/code]." msgid "" "Sets a custom parameter. These are used as local memory, because resources " "can be reused across the tree or scenes." msgstr "" "Establece un parámetro personalizado. Estos se utilizan como memoria local, " "ya que los recursos se pueden reutilizar en el árbol o en las escenas." msgid "If [code]true[/code], filtering is enabled." msgstr "Si es [code]true[/code], el filtrado está activado." msgid "" "Emitted by nodes that inherit from this class and that have an internal tree " "when one of their animation nodes removes. The animation nodes that emit this " "signal are [AnimationNodeBlendSpace1D], [AnimationNodeBlendSpace2D], " "[AnimationNodeStateMachine], and [AnimationNodeBlendTree]." msgstr "" "Emitida por los nodos que heredan de esta clase y que tienen un árbol interno " "cuando se elimina uno de sus nodos de animación. Los nodos de animación que " "emiten esta señal son [AnimationNodeBlendSpace1D], " "[AnimationNodeBlendSpace2D], [AnimationNodeStateMachine] y " "[AnimationNodeBlendTree]." msgid "" "Emitted by nodes that inherit from this class and that have an internal tree " "when one of their animation node names changes. The animation nodes that emit " "this signal are [AnimationNodeBlendSpace1D], [AnimationNodeBlendSpace2D], " "[AnimationNodeStateMachine], and [AnimationNodeBlendTree]." msgstr "" "Emitida por los nodos que heredan de esta clase y que tienen un árbol interno " "cuando cambia el nombre de uno de sus nodos de animación. Los nodos de " "animación que emiten esta señal son [AnimationNodeBlendSpace1D], " "[AnimationNodeBlendSpace2D], [AnimationNodeStateMachine] y " "[AnimationNodeBlendTree]." msgid "" "Emitted by nodes that inherit from this class and that have an internal tree " "when one of their animation nodes changes. The animation nodes that emit this " "signal are [AnimationNodeBlendSpace1D], [AnimationNodeBlendSpace2D], " "[AnimationNodeStateMachine], [AnimationNodeBlendTree] and " "[AnimationNodeTransition]." msgstr "" "Emitida por los nodos que heredan de esta clase y que tienen un árbol interno " "cuando uno de sus nodos de animación cambia. Los nodos de animación que " "emiten esta señal son [AnimationNodeBlendSpace1D], " "[AnimationNodeBlendSpace2D], [AnimationNodeStateMachine], " "[AnimationNodeBlendTree] y [AnimationNodeTransition]." msgid "Do not use filtering." msgstr "No utilizar el filtrado." msgid "Paths matching the filter will be allowed to pass." msgstr "Las rutas que coincidan con el filtro podrán pasar." msgid "Paths matching the filter will be discarded." msgstr "Las rutas que coincidan con el filtro serán descartados." msgid "Paths matching the filter will be blended (by the blend value)." msgstr "" "Los caminos que coincidan con el filtro se mezclarán (por el valor de mezcla)." msgid "Blends two animations additively inside of an [AnimationNodeBlendTree]." msgstr "" "Mezcla dos animaciones sumándolas dentro de un [AnimationNodeBlendTree]." msgid "" "A resource to add to an [AnimationNodeBlendTree]. Blends two animations " "additively based on the amount value.\n" "If the amount is greater than [code]1.0[/code], the animation connected to " "\"in\" port is blended with the amplified animation connected to \"add\" " "port.\n" "If the amount is less than [code]0.0[/code], the animation connected to " "\"in\" port is blended with the inverted animation connected to \"add\" port." msgstr "" "Un recurso para añadir a un [AnimationNodeBlendTree]. Mezcla dos animaciones " "de forma aditiva basándose en el valor de cantidad.\n" "Si la cantidad es mayor que [code]1.0[/code], la animación conectada al " "puerto \"in\" se mezcla con la animación amplificada conectada al puerto " "\"add\".\n" "Si la cantidad es menor que [code]0.0[/code], la animación conectada al " "puerto \"in\" se mezcla con la animación invertida conectada al puerto " "\"add\"." msgid "" "Blends two of three animations additively inside of an " "[AnimationNodeBlendTree]." msgstr "" "Mezcla dos de tres animaciones sumandolas dentro de un " "[AnimationNodeBlendTree]." msgid "An input animation for an [AnimationNodeBlendTree]." msgstr "Una animación de entrada para un [AnimationNodeBlendTree]." msgid "" "A resource to add to an [AnimationNodeBlendTree]. Only has one output port " "using the [member animation] property. Used as an input for [AnimationNode]s " "that blend animations together." msgstr "" "Un recurso para añadir a un [AnimationNodeBlendTree]. Solo tiene un puerto de " "salida que utiliza la propiedad [member animation]. Se utiliza como entrada " "para los [AnimationNode] que mezclan animaciones." msgid "3D Platformer Demo" msgstr "Demo de Plataformas en 3D" msgid "" "If [code]true[/code], on receiving a request to play an animation from the " "start, the first frame is not drawn, but only processed, and playback starts " "from the next frame.\n" "See also the notes of [method AnimationPlayer.play]." msgstr "" "Si es [code]true[/code], al recibir una solicitud para reproducir una " "animación desde el principio, el primer fotograma no se dibuja, sino que solo " "se procesa, y la reproducción comienza desde el siguiente fotograma.\n" "Véase también las notas de [method AnimationPlayer.play]." msgid "" "Animation to use as an output. It is one of the animations provided by " "[member AnimationTree.anim_player]." msgstr "" "Animación para usar como salida. Es una de las animaciones proporcionadas por " "[member AnimationTree.anim_player]." msgid "" "If [member use_custom_timeline] is [code]true[/code], override the loop " "settings of the original [Animation] resource with the value.\n" "[b]Note:[/b] If the [member Animation.loop_mode] isn't set to looping, the " "[method Animation.track_set_interpolation_loop_wrap] option will not be " "respected. If you cannot get the expected behavior, consider duplicating the " "[Animation] resource and changing the loop settings." msgstr "" "Si [member use_custom_timeline] es [code]true[/code], sobrescribe los ajustes " "de bucle del recurso [Animation] original con el valor.\n" "[b]Nota:[/b] Si el [member Animation.loop_mode] no está configurado para " "bucle, la opción [method Animation.track_set_interpolation_loop_wrap] no se " "respetará. Si no puedes obtener el comportamiento esperado, considera " "duplicar el recurso [Animation] y cambiar los ajustes de bucle." msgid "Determines the playback direction of the animation." msgstr "Determina la dirección de reproducción de la animación." msgid "" "If [member use_custom_timeline] is [code]true[/code], offset the start " "position of the animation.\n" "This is useful for adjusting which foot steps first in 3D walking animations." msgstr "" "Si [member use_custom_timeline] es [code]true[/code], desplaza la posición " "inicial de la animación.\n" "Esto es útil para ajustar qué pie pisa primero en animaciones de caminata en " "3D." msgid "" "If [code]true[/code], scales the time so that the length specified in [member " "timeline_length] is one cycle.\n" "This is useful for matching the periods of walking and running animations.\n" "If [code]false[/code], the original animation length is respected. If you set " "the loop to [member loop_mode], the animation will loop in [member " "timeline_length]." msgstr "" "Si es [code]true[/code], escala el tiempo para que la duración especificada " "en [member timeline_length] sea un ciclo.\n" "Esto es útil para hacer coincidir los periodos de las animaciones de caminar " "y correr.\n" "Si es [code]false[/code], se respeta la duración original de la animación. Si " "estableces el bucle en [member loop_mode], la animación se repetirá en " "[member timeline_length]." msgid "" "The length of the custom timeline.\n" "If [member stretch_time_scale] is [code]true[/code], scales the animation to " "this length." msgstr "" "Duración de la línea de tiempo personalizada.\n" "Si [member stretch_time_scale] es [code]true[/code], la animación se ajusta a " "esta duración." msgid "" "If [code]true[/code], [AnimationNode] provides an animation based on the " "[Animation] resource with some parameters adjusted." msgstr "" "Si es [code]true[/code], el [AnimationNode] proporciona una animación basada " "en el recurso [Animation] con algunos parámetros ajustados." msgid "Plays animation in forward direction." msgstr "Reproduce la animación en dirección hacia adelante." msgid "Plays animation in backward direction." msgstr "Reproduce la animación en dirección hacia atrás." msgid "Blends two animations linearly inside of an [AnimationNodeBlendTree]." msgstr "" "Mezcla dos animaciones linealmente dentro de un [AnimationNodeBlendTree]." msgid "" "A resource to add to an [AnimationNodeBlendTree]. Blends two animations " "linearly based on the amount value.\n" "In general, the blend value should be in the [code][0.0, 1.0][/code] range. " "Values outside of this range can blend amplified or inverted animations, " "however, [AnimationNodeAdd2] works better for this purpose." msgstr "" "Un recurso para añadir a un [AnimationNodeBlendTree]. Mezcla dos animaciones " "linealmente basándose en el valor de la cantidad.\n" "En general, el valor de mezcla debe estar en el rango [code][0.0, 1.0][/" "code]. Los valores fuera de este rango pueden mezclar animaciones " "amplificadas o invertidas, sin embargo, [AnimationNodeAdd2] funciona mejor " "para este propósito." msgid "" "Blends two of three animations linearly inside of an [AnimationNodeBlendTree]." msgstr "" "Mezcla dos de tres animaciones linealmente dentro de un " "[AnimationNodeBlendTree]." msgid "" "A resource to add to an [AnimationNodeBlendTree]. Blends two animations out " "of three linearly out of three based on the amount value.\n" "This animation node has three inputs:\n" "- The base animation to blend with\n" "- A \"-blend\" animation to blend with when the blend amount is negative " "value\n" "- A \"+blend\" animation to blend with when the blend amount is positive " "value\n" "In general, the blend value should be in the [code][-1.0, 1.0][/code] range. " "Values outside of this range can blend amplified animations, however, " "[AnimationNodeAdd3] works better for this purpose." msgstr "" "Un recurso para añadir a un [AnimationNodeBlendTree]. Mezcla linealmente dos " "animaciones de un total de tres según el valor de amount.\n" "Este nodo de animación tiene tres entradas:\n" "- La animación base con la que mezclar.\n" "- Una animación \"-blend\" para mezclar cuando el valor de blend es " "negativo.\n" "- Una animación \"+blend\" para mezclar cuando el valor de blend es " "positivo.\n" "En general, el valor de mezcla (blend) debería estar en el rango [code][-1.0, " "1.0][/code]. Valores fuera de este rango pueden mezclar animaciones " "amplificadas; sin embargo, [AnimationNodeAdd3] funciona mejor para este " "propósito." msgid "" "A set of [AnimationRootNode]s placed on a virtual axis, crossfading between " "the two adjacent ones. Used by [AnimationTree]." msgstr "" "Un conjunto de [AnimationRootNode]s colocados en un eje virtual, con " "transición cruzada entre los dos adyacentes. Usado por [AnimationTree]." msgid "" "A resource used by [AnimationNodeBlendTree].\n" "[AnimationNodeBlendSpace1D] represents a virtual axis on which any type of " "[AnimationRootNode]s can be added using [method add_blend_point]. Outputs the " "linear blend of the two [AnimationRootNode]s adjacent to the current value.\n" "You can set the extents of the axis with [member min_space] and [member " "max_space]." msgstr "" "Un recurso utilizado por [AnimationNodeBlendTree].\n" "[AnimationNodeBlendSpace1D] representa un eje virtual en el que se puede " "agregar cualquier tipo de [AnimationRootNode] usando [method " "add_blend_point]. Genera la mezcla lineal de los dos [AnimationRootNode] " "adyacentes al valor actual.\n" "Puede establecer los límites del eje con [member min_space] y [member " "max_space]." msgid "Returns the number of points on the blend axis." msgstr "Devuelve el número de puntos en el eje de la mezcla." msgid "" "Returns the [AnimationNode] referenced by the point at index [param point]." msgstr "" "Devuelve el [AnimationNode] referenciado por el punto en el índice [param " "point]." msgid "Returns the position of the point at index [param point]." msgstr "Devuelve la posición del punto en el índice [param point]." msgid "Removes the point at index [param point] from the blend axis." msgstr "Elimina el punto en el índice [param point] del eje de la mezcla." msgid "" "Changes the [AnimationNode] referenced by the point at index [param point]." msgstr "" "Cambia el [AnimationNode] al que se refiere el punto en el índice [param " "point]." msgid "" "Updates the position of the point at index [param point] on the blend axis." msgstr "" "Actualiza la posición del punto en el índice [param point] en el eje de la " "mezcla." msgid "Controls the interpolation between animations." msgstr "Controla la interpolación entre animaciones." msgid "" "The blend space's axis's upper limit for the points' position. See [method " "add_blend_point]." msgstr "" "El límite superior del eje del espacio de mezcla para la posición de los " "puntos. Véase [method add_blend_point]." msgid "" "The blend space's axis's lower limit for the points' position. See [method " "add_blend_point]." msgstr "" "El límite inferior del eje del espacio de mezcla para la posición de los " "puntos. Véase [method add_blend_point]." msgid "Position increment to snap to when moving a point on the axis." msgstr "" "Incremento de la posición a la que se ajusta cuando se mueve un punto en el " "eje." msgid "Use [member sync_mode] instead." msgstr "Utiliza [member sync_mode] en su lugar." msgid "Label of the virtual axis of the blend space." msgstr "Etiqueta del eje virtual del espacio de mezcla." msgid "The interpolation between animations is linear." msgstr "La interpolación entre las animaciones es lineal." msgid "" "The blend space plays the animation of the animation node which blending " "position is closest to. Useful for frame-by-frame 2D animations." msgstr "" "El espacio de mezcla reproduce la animación del nodo de animación cuya " "posición de mezcla es la más cercana. Es útil para las animaciones 2D " "fotograma a fotograma." msgid "" "Similar to [constant BLEND_MODE_DISCRETE], but starts the new animation at " "the last animation's playback position." msgstr "" "Similar a [constant BLEND_MODE_DISCRETE], pero inicia la nueva animación en " "la posición de reproducción de la última animación." msgid "" "A set of [AnimationRootNode]s placed on 2D coordinates, crossfading between " "the three adjacent ones. Used by [AnimationTree]." msgstr "" "Un conjunto de [AnimationRootNode]s colocados en coordenadas 2D, que se " "funden entre las tres adyacentes. Usado por [AnimationTree]." msgid "" "A resource used by [AnimationNodeBlendTree].\n" "[AnimationNodeBlendSpace2D] represents a virtual 2D space on which " "[AnimationRootNode]s are placed. Outputs the linear blend of the three " "adjacent animations using a [Vector2] weight. Adjacent in this context means " "the three [AnimationRootNode]s making up the triangle that contains the " "current value.\n" "You can add vertices to the blend space with [method add_blend_point] and " "automatically triangulate it by setting [member auto_triangles] to " "[code]true[/code]. Otherwise, use [method add_triangle] and [method " "remove_triangle] to triangulate the blend space by hand." msgstr "" "Un recurso utilizado por [AnimationNodeBlendTree].\n" "[AnimationNodeBlendSpace2D] representa un espacio virtual 2D sobre el que se " "colocan los [AnimationRootNode]. Genera la mezcla lineal de las tres " "animaciones adyacentes mediante un peso [Vector2]. En este contexto, " "\"adyacente\" se refiere a los tres [AnimationRootNode] que forman el " "triángulo que contiene el valor actual.\n" "Puedes añadir vértices al espacio de mezcla con [method add_blend_point] y " "triangularlo automáticamente configurando [member auto_triangles] a " "[code]true[/code]. De lo contrario, utiliza [method add_triangle] y [method " "remove_triangle] para triangular el espacio de mezcla manualmente." msgid "" "Creates a new triangle using three points [param x], [param y], and [param " "z]. Triangles can overlap. You can insert the triangle at a specific index " "using the [param at_index] argument. If you use the default value for [param " "at_index], the point is inserted at the end of the blend points array." msgstr "" "Crea un nuevo triángulo usando tres puntos [param x], [param y], and [param " "z]. Los triángulos pueden superponerse. Puedes insertar el triángulo en un " "índice específico usando el argumento [param at_index]. Si utilizas el valor " "por defecto de [param at_index], el punto se inserta al final del array de " "puntos de mezcla." msgid "Returns the number of points in the blend space." msgstr "Devuelve el número de puntos en el espacio de mezcla." msgid "" "Returns the [AnimationRootNode] referenced by the point at index [param " "point]." msgstr "" "Devuelve el [AnimationRootNode] referenciado por el punto en el índice [param " "point]." msgid "Returns the number of triangles in the blend space." msgstr "Devuelve el número de triángulos en el espacio de mezcla." msgid "" "Returns the position of the point at index [param point] in the triangle of " "index [param triangle]." msgstr "" "Devuelve la posición del punto en el índice [param point] en el triángulo de " "índice [param triangle]." msgid "Removes the point at index [param point] from the blend space." msgstr "Elimina el punto en el índice [param point] del espacio de mezcla." msgid "Removes the triangle at index [param triangle] from the blend space." msgstr "" "Elimina el triángulo en el índice [param triangle] del espacio de mezcla." msgid "" "Updates the position of the point at index [param point] in the blend space." msgstr "" "Actualiza la posición del punto en el índice [param point] en el espacio de " "mezcla." msgid "" "If [code]true[/code], the blend space is triangulated automatically. The mesh " "updates every time you add or remove points with [method add_blend_point] and " "[method remove_blend_point]." msgstr "" "Si es [code]true[/code], el espacio de mezcla se triangula automáticamente. " "La malla se actualiza cada vez que añades o eliminas puntos con [method " "add_blend_point] y [method remove_blend_point]." msgid "" "The blend space's X and Y axes' upper limit for the points' position. See " "[method add_blend_point]." msgstr "" "El límite superior de los ejes X e Y del espacio de mezcla para la posición " "de los puntos. Véase [method add_blend_point]." msgid "" "The blend space's X and Y axes' lower limit for the points' position. See " "[method add_blend_point]." msgstr "" "El límite inferior de los ejes X e Y del espacio de mezcla para la posición " "de los puntos. Véase [method add_blend_point]." msgid "Position increment to snap to when moving a point." msgstr "Incremento de la posición a la que se ajusta cuando se mueve un punto." msgid "Name of the blend space's X axis." msgstr "Nombre del eje X del espacio de la mezcla." msgid "Name of the blend space's Y axis." msgstr "El nombre del eje Y del espacio de mezcla." msgid "" "Emitted every time the blend space's triangles are created, removed, or when " "one of their vertices changes position." msgstr "" "Emitida cada vez que los triángulos del espacio de mezcla se crean, se " "eliminan, o cuando uno de sus vértices cambia de posición." msgid "" "A sub-tree of many type [AnimationNode]s used for complex animations. Used by " "[AnimationTree]." msgstr "" "Un subárbol de muchos [AnimationNode]s usado para animaciones complejas. " "Usado por [AnimationTree]." msgid "" "This animation node may contain a sub-tree of any other type animation nodes, " "such as [AnimationNodeTransition], [AnimationNodeBlend2], " "[AnimationNodeBlend3], [AnimationNodeOneShot], etc. This is one of the most " "commonly used animation node roots.\n" "An [AnimationNodeOutput] node named [code]output[/code] is created by default." msgstr "" "Este nodo de animación puede contener un subárbol de cualquier otro tipo de " "nodos de animación, como [AnimationNodeTransition], [AnimationNodeBlend2], " "[AnimationNodeBlend3], [AnimationNodeOneShot], etc. Este es uno de los nodos " "raíz de animación más utilizados.\n" "Por defecto, se crea un nodo [AnimationNodeOutput] llamado [code]output[/" "code]." msgid "" "Adds an [AnimationNode] at the given [param position]. The [param name] is " "used to identify the created sub animation node later." msgstr "" "Añade un [AnimationNode] en la [param position] dada. El [param name] se " "utiliza para identificar el subnodo de animación creado más tarde." msgid "" "Connects the output of an [AnimationNode] as input for another " "[AnimationNode], at the input port specified by [param input_index]." msgstr "" "Conecta la salida de un [AnimationNode] como entrada de otro [AnimationNode], " "en el puerto de entrada especificado por [param input_index]." msgid "Disconnects the animation node connected to the specified input." msgstr "Desconecta el nodo de animación conectado a la entrada especificada." msgid "Returns the sub animation node with the specified [param name]." msgstr "Devuelve el subnodo de animación con el [param name] especificado." msgid "" "Returns a list containing the names of all sub animation nodes in this blend " "tree." msgstr "" "Devuelve una lista que contiene los nombres de todos los subnodos de " "animación en este árbol de mezcla." msgid "" "Returns the position of the sub animation node with the specified [param " "name]." msgstr "" "Devuelve la posición del subnodo de animación con el [param name] " "especificado." msgid "" "Returns [code]true[/code] if a sub animation node with specified [param name] " "exists." msgstr "" "Devuelve [code]true[/code] si existe un nodo de subanimación con el [param " "name] especificado." msgid "Removes a sub animation node." msgstr "Elimina un subnodo de animación." msgid "Changes the name of a sub animation node." msgstr "Cambia el nombre de un subnodo de animación." msgid "Modifies the position of a sub animation node." msgstr "Modifica la posición de un subnodo de animación." msgid "The global offset of all sub animation nodes." msgstr "El desplazamiento global de todos los subnodos de animación." msgid "Emitted when the input port information is changed." msgstr "Emitida cuando se cambia la información del puerto de entrada." msgid "The connection was successful." msgstr "La conexion tuvo éxito." msgid "The input node is [code]null[/code]." msgstr "El nodo entrada es [code]null[/code]." msgid "The specified input port is out of range." msgstr "El puerto de entrada especificado está fuera de rango." msgid "The output node is [code]null[/code]." msgstr "El nodo salida es [code]null[/code]." msgid "Input and output nodes are the same." msgstr "Los nodos de entrada y salida son los mismos." msgid "The specified connection already exists." msgstr "La conexion ya existe." msgid "Base class for extending [AnimationRootNode]s from GDScript, C#, or C++." msgstr "Clase base para extender [AnimationRootNode]s desde GDScript, C# o C++." msgid "" "[AnimationNodeExtension] exposes the APIs of [AnimationRootNode] to allow " "users to extend it from GDScript, C#, or C++. This class is not meant to be " "used directly, but to be extended by other classes. It is used to create " "custom nodes for the [AnimationTree] system." msgstr "" "[AnimationNodeExtension] expone las APIs de [AnimationRootNode] para permitir " "a los usuarios extenderlo desde GDScript, C# o C++. Esta clase no está " "pensada para ser usada directamente, sino para ser extendida por otras " "clases. Se usa para crear nodos personalizados para el sistema " "[AnimationTree]." msgid "" "A version of the [method AnimationNode._process] method that is meant to be " "overridden by custom nodes. It returns a [PackedFloat32Array] with the " "processed animation data.\n" "The [PackedFloat64Array] parameter contains the playback information, " "containing the following values encoded as floating point numbers (in order): " "playback time and delta, start and end times, whether a seek was requested " "(encoded as a float greater than [code]0[/code]), whether the seek request " "was externally requested (encoded as a float greater than [code]0[/code]), " "the current [enum Animation.LoopedFlag] (encoded as a float), and the current " "blend weight.\n" "The function must return a [PackedFloat32Array] of the node's time info, " "containing the following values (in order): animation length, time position, " "delta, [enum Animation.LoopMode] (encoded as a float), whether the animation " "is about to end (encoded as a float greater than [code]0[/code]) and whether " "the animation is infinite (encoded as a float greater than [code]0[/code]). " "All values must be included in the returned array." msgstr "" "Una versión del método [method AnimationNode._process] pensada para ser " "sobrescrita por un nodo personalizado. Devuelve una [PackedFloat32Array] con " "la información de la animación procesada.\n" "El parámetro [PackedFloat64Array] contiene información de reproducción, " "conteniendo los siguientes valores codificados como números de punto flotante " "(en orden): tiempo de reproducción y delta, tiempo de inicio y final, si se " "ha solicitado una búsqueda (codificado como un float mayor a [code]0[/code]), " "si la solicitud de búsqueda fue solicitada externamente (codificado como un " "float mayor a [code]0[/code]), el [enum Animation.LoopedFlag] actual " "(codificado como float), y el peso de mezcla actual.\n" "La función debe retornar un [PackedFloat32Array] de la información de tiempo " "del nodo, conteniendo los siguientes valores (en orden): largo de la " "animación, posición en el tiempo, delta, [enum Animation.LoopMode] " "(codificado como float), si la animación está por terminar (codificado como " "un float mayor a [code]0[/code]) y si la animación es infinita (codificado " "como un float mayor a [code]0[/code]). Todos los valores deben incluirse en " "la array retornada." msgid "" "Returns the animation's remaining time for the given node info. For looping " "animations, it will only return the remaining time if [param break_loop] is " "[code]true[/code], a large integer value will be returned otherwise." msgstr "" "Devuelve el tiempo restante de la animación para la información del nodo " "dada. Para animaciones en bucle, solo devolverá el tiempo restante si [param " "break_loop] es [code]true[/code], de lo contrario se devolverá un valor " "entero grande." msgid "" "Returns [code]true[/code] if the animation for the given [param node_info] is " "looping." msgstr "" "Devuelve [code]true[/code] si la animación para el [param node_info] dado " "está en bucle." msgid "Plays an animation once in an [AnimationNodeBlendTree]." msgstr "Reproduce una animación una vez en un [AnimationNodeBlendTree]." msgid "" "A resource to add to an [AnimationNodeBlendTree]. This animation node will " "execute a sub-animation and return once it finishes. Blend times for fading " "in and out can be customized, as well as filters.\n" "After setting the request and changing the animation playback, the one-shot " "node automatically clears the request on the next process frame by setting " "its [code]request[/code] value to [constant ONE_SHOT_REQUEST_NONE].\n" "[codeblocks]\n" "[gdscript]\n" "# Play child animation connected to \"shot\" port.\n" "animation_tree.set(\"parameters/OneShot/request\", " "AnimationNodeOneShot.ONE_SHOT_REQUEST_FIRE)\n" "# Alternative syntax (same result as above).\n" "animation_tree[\"parameters/OneShot/request\"] = " "AnimationNodeOneShot.ONE_SHOT_REQUEST_FIRE\n" "\n" "# Abort child animation connected to \"shot\" port.\n" "animation_tree.set(\"parameters/OneShot/request\", " "AnimationNodeOneShot.ONE_SHOT_REQUEST_ABORT)\n" "# Alternative syntax (same result as above).\n" "animation_tree[\"parameters/OneShot/request\"] = " "AnimationNodeOneShot.ONE_SHOT_REQUEST_ABORT\n" "\n" "# Abort child animation with fading out connected to \"shot\" port.\n" "animation_tree.set(\"parameters/OneShot/request\", " "AnimationNodeOneShot.ONE_SHOT_REQUEST_FADE_OUT)\n" "# Alternative syntax (same result as above).\n" "animation_tree[\"parameters/OneShot/request\"] = " "AnimationNodeOneShot.ONE_SHOT_REQUEST_FADE_OUT\n" "\n" "# Get current state (read-only).\n" "animation_tree.get(\"parameters/OneShot/active\")\n" "# Alternative syntax (same result as above).\n" "animation_tree[\"parameters/OneShot/active\"]\n" "\n" "# Get current internal state (read-only).\n" "animation_tree.get(\"parameters/OneShot/internal_active\")\n" "# Alternative syntax (same result as above).\n" "animation_tree[\"parameters/OneShot/internal_active\"]\n" "[/gdscript]\n" "[csharp]\n" "// Play child animation connected to \"shot\" port.\n" "animationTree.Set(\"parameters/OneShot/request\", " "(int)AnimationNodeOneShot.OneShotRequest.Fire);\n" "\n" "// Abort child animation connected to \"shot\" port.\n" "animationTree.Set(\"parameters/OneShot/request\", " "(int)AnimationNodeOneShot.OneShotRequest.Abort);\n" "\n" "// Abort child animation with fading out connected to \"shot\" port.\n" "animationTree.Set(\"parameters/OneShot/request\", " "(int)AnimationNodeOneShot.OneShotRequest.FadeOut);\n" "\n" "// Get current state (read-only).\n" "animationTree.Get(\"parameters/OneShot/active\");\n" "\n" "// Get current internal state (read-only).\n" "animationTree.Get(\"parameters/OneShot/internal_active\");\n" "[/csharp]\n" "[/codeblocks]" msgstr "" "Un recurso para agregar a un [AnimationNodeBlendTree]. Este nodo de animación " "ejecutara una sub-animación y retornara una vez esta termine. Los tiempos de " "mezcla para entrada y salida gradual pueden ser personalizados, al igual que " "los filtros.\n" "Luego de establecer la solicitud y cambiar la reproducción de la animación, " "el modo de un solo uso automáticamente limpia la solicitud en el siguiente " "fotograma de procesamiento estableciendo su valor de [code]request[/code] a " "[constant ONE_SHOT_REQUEST_NONE].\n" "[codeblocks]\n" "[gdscript]\n" "# Reproduce la animación hija conectada al puerto \"shot\"\n" "animation_tree.set(\"parameters/OneShot/request\", " "AnimationNodeOneShot.ONE_SHOT_REQUEST_FIRE)\n" "# Sintaxis alternativa (produce el mismo resultado que arriba)\n" "animation_tree[\"parameters/OneShot/request\"] = " "AnimationNodeOneShot.ONE_SHOT_REQUEST_FIRE\n" "\n" "# Aborta la animación hija conectada al puerto \"shot\"\n" "animation_tree.set(\"parameters/OneShot/request\", " "AnimationNodeOneShot.ONE_SHOT_REQUEST_ABORT)\n" "# Sintaxis alternativa (produce el mismo resultado que arriba)\n" "animation_tree[\"parameters/OneShot/request\"] = " "AnimationNodeOneShot.ONE_SHOT_REQUEST_ABORT\n" "\n" "# Aborta la animación hija con salida gradual conectada al puerto \"shot\"\n" "animation_tree.set(\"parameters/OneShot/request\", " "AnimationNodeOneShot.ONE_SHOT_REQUEST_FADE_OUT)\n" "# Sintaxis alternativa (produce el mismo resultado que arriba)\n" "animation_tree[\"parameters/OneShot/request\"] = " "AnimationNodeOneShot.ONE_SHOT_REQUEST_FADE_OUT\n" "\n" "# Obtiene el estado actual (solo lectura)\n" "animation_tree.get(\"parameters/OneShot/active\")\n" "# Sintaxis alternativa (produce el mismo resultado que arriba)\n" "animation_tree[\"parameters/OneShot/active\"]\n" "\n" "# Obtiene el estado interno actual (solo lectura)\n" "animation_tree.get(\"parameters/OneShot/internal_active\")\n" "# Sintaxis alternativa (produce el mismo resultado que arriba)\n" "animation_tree[\"parameters/OneShot/internal_active\"]\n" "[/gdscript]\n" "[csharp]\n" "// Reproduce la animación hija conectada al puerto \"shot\"\n" "animationTree.Set(\"parameters/OneShot/request\", " "(int)AnimationNodeOneShot.OneShotRequest.Fire);\n" "\n" "// Aborta la animación hija conectada al puerto \"shot\"\n" "animationTree.Set(\"parameters/OneShot/request\", " "(int)AnimationNodeOneShot.OneShotRequest.Abort);\n" "\n" "// Aborta la animación hija con salida gradual conectada al puerto \"shot\"\n" "animationTree.Set(\"parameters/OneShot/request\", " "(int)AnimationNodeOneShot.OneShotRequest.FadeOut);\n" "\n" "// Obtiene el estado actual (solo lectura)\n" "animationTree.Get(\"parameters/OneShot/active\");\n" "\n" "// Obtiene el estado interno actual (solo lectura)\n" "animationTree.Get(\"parameters/OneShot/internal_active\");\n" "[/csharp]\n" "[/codeblocks]" msgid "" "If [code]true[/code], the sub-animation will abort if resumed with a reset " "after a prior interruption." msgstr "" "[code]true[/code], la sub-animación se abortará si se reanuda con un reinicio " "después de una interrupción previa." msgid "" "If [code]true[/code], the sub-animation will restart automatically after " "finishing.\n" "In other words, to start auto restarting, the animation must be played once " "with the [constant ONE_SHOT_REQUEST_FIRE] request. The [constant " "ONE_SHOT_REQUEST_ABORT] request stops the auto restarting, but it does not " "disable the [member autorestart] itself. So, the [constant " "ONE_SHOT_REQUEST_FIRE] request will start auto restarting again." msgstr "" "Si es [code]true[/code], la subanimación se reiniciará automáticamente al " "finalizar.\n" "En otras palabras, para iniciar el reinicio automático, la animación debe " "reproducirse una vez con la petición [constant ONE_SHOT_REQUEST_FIRE]. La " "petición [constant ONE_SHOT_REQUEST_ABORT] detendrá el reinicio automático, " "pero no deshabilitará a [member autorestart] en sí. Así que la solicitud " "[constant ONE_SHOT_REQUEST_FIRE] iniciará de nuevo el reinicio automático." msgid "The delay after which the automatic restart is triggered, in seconds." msgstr "El retardo con el cual un reinicio automatico es lanzado, en segundos." msgid "" "If [member autorestart] is [code]true[/code], a random additional delay (in " "seconds) between 0 and this value will be added to [member autorestart_delay]." msgstr "" "Si [member autorestart] es [code]true[/code], un retardo aleatorio adicional " "(en segundos) entre 0 y este valor sera añadido al [member autorestart_delay." msgid "" "If [code]true[/code], breaks the loop at the end of the loop cycle for " "transition, even if the animation is looping." msgstr "" "Si es [code]true[/code], interrumpe el bucle al final del ciclo de bucle para " "la transición, incluso si la animación está en bucle." msgid "" "Determines how cross-fading between animations is eased. If empty, the " "transition will be linear. Should be a unit [Curve]." msgstr "" "Determina cómo se suaviza el fundido cruzado (cross-fading) entre " "animaciones. Si está vacío, la transición será lineal. Debe ser una [Curve] " "unitaria." msgid "" "The fade-in duration. For example, setting this to [code]1.0[/code] for a 5 " "second length animation will produce a cross-fade that starts at 0 second and " "ends at 1 second during the animation.\n" "[b]Note:[/b] [AnimationNodeOneShot] transitions the current state after the " "fading has finished." msgstr "" "La duración del fundido de entrada (fade-in). Por ejemplo, si se establece en " "[code]1.0[/code] para una animación de 5 segundos de duración, se producirá " "un fundido cruzado que comienza en el segundo 0 y termina en el segundo 1 " "durante la animación.\n" "[b]Nota:[/b] [AnimationNodeOneShot] transiciona el estado actual después de " "que el fundido haya finalizado." msgid "" "The fade-out duration. For example, setting this to [code]1.0[/code] for a 5 " "second length animation will produce a cross-fade that starts at 4 second and " "ends at 5 second during the animation.\n" "[b]Note:[/b] [AnimationNodeOneShot] transitions the current state after the " "fading has finished." msgstr "" "La duración del fundido de salida (fade-out). Por ejemplo, si se establece en " "[code]1.0[/code] para una animación de 5 segundos de duración, se producirá " "un fundido cruzado que comienza en el segundo 4 y termina en el segundo 5 " "durante la animación.\n" "[b]Nota:[/b] [AnimationNodeOneShot] transiciona el estado actual después de " "que el fundido haya finalizado." msgid "The blend type." msgstr "El tipo de mezcla." msgid "The default state of the request. Nothing is done." msgstr "El estado predeterminado de la petición. No se hace nada." msgid "The request to play the animation connected to \"shot\" port." msgstr "La petición para reproducir la animación conectada al puerto \"shot\"." msgid "The request to stop the animation connected to \"shot\" port." msgstr "La petición para detener la animación conectada al puerto \"shot\"." msgid "The request to fade out the animation connected to \"shot\" port." msgstr "" "La petición para aplicar un fundido de salida a la animación conectada al " "puerto \"shot\"." msgid "Blends two animations. See also [AnimationNodeBlend2]." msgstr "Combina dos animaciones. Véase también [AnimationNodeBlend2]." msgid "Blends two animations additively. See also [AnimationNodeAdd2]." msgstr "" "Combina dos animaciones de forma aditiva. Véase también [AnimationNodeAdd2]." msgid "The animation output node of an [AnimationNodeBlendTree]." msgstr "El nodo de salida de animación de un [AnimationNodeBlendTree]." msgid "" "A node created automatically in an [AnimationNodeBlendTree] that outputs the " "final animation." msgstr "" "Un nodo creado automáticamente en un [AnimationNodeBlendTree] que emite la " "animación final." msgid "" "A state machine with multiple [AnimationRootNode]s, used by [AnimationTree]." msgstr "" "Una máquina de estados con múltiples [AnimationRootNode], utilizada por " "[AnimationTree]." msgid "" "Contains multiple [AnimationRootNode]s representing animation states, " "connected in a graph. State transitions can be configured to happen " "automatically or via code, using a shortest-path algorithm. Retrieve the " "[AnimationNodeStateMachinePlayback] object from the [AnimationTree] node to " "control it programmatically.\n" "[codeblocks]\n" "[gdscript]\n" "var state_machine = $AnimationTree.get(\"parameters/playback\")\n" "state_machine.travel(\"some_state\")\n" "[/gdscript]\n" "[csharp]\n" "var stateMachine = GetNode(\"AnimationTree\").Get(\"parameters/" "playback\") as AnimationNodeStateMachinePlayback;\n" "stateMachine.Travel(\"some_state\");\n" "[/csharp]\n" "[/codeblocks]" msgstr "" "Contiene múltiples [AnimationRootNode]s que representan estados de animación, " "conectados en un grafo. Las transiciones de estado pueden configurarse para " "ocurrir automáticamente o mediante código, usando un algoritmo de camino más " "corto. Recupera el objeto [AnimationNodeStateMachinePlayback] desde el nodo " "[AnimationTree] para controlarlo programáticamente.\n" "[codeblocks]\n" "[gdscript]\n" "var state_machine = $AnimationTree.get(\"parameters/playback\")\n" "state_machine.travel(\"some_state\")\n" "[/gdscript]\n" "[csharp]\n" "var stateMachine = GetNode(\"AnimationTree\").Get(\"parameters/" "playback\") as AnimationNodeStateMachinePlayback;\n" "stateMachine.Travel(\"some_state\");\n" "[/csharp]\n" "[/codeblocks]" msgid "" "Adds a new animation node to the graph. The [param position] is used for " "display in the editor." msgstr "" "Añade un nuevo nodo de animación al gráfico. La [param position] se utiliza " "para la visualización en el editor." msgid "Adds a transition between the given animation nodes." msgstr "Agrega una transición entre los nodos de animación dados." msgid "Returns the draw offset of the graph. Used for display in the editor." msgstr "" "Devuelve el dezplazamiento del dibujo de un gráfico. Utilizado para " "visualizaciones en el editor." msgid "Returns the animation node with the given name." msgstr "Devuelve el nodo animación con el nombre dado." msgid "" "Returns a list containing the names of all animation nodes in this state " "machine." msgstr "" "Devuelve una lista que contiene los nombres de todos los nodos de animación " "en esta máquina de estados." msgid "Returns the given animation node's name." msgstr "Devuelve el node del nombre de la animación dada." msgid "" "Returns the given animation node's coordinates. Used for display in the " "editor." msgstr "" "Devuelve las coordenadas del nodo de animación especificado. Se utiliza para " "visualizar en el editor." msgid "Returns the given transition." msgstr "Devuelve la transicion dada." msgid "Returns the number of connections in the graph." msgstr "Devuelve el número de conexiones en el gráfico." msgid "Returns the given transition's start node." msgstr "Devuelve el nodo de comienzo de la transicion dada." msgid "Returns the given transition's end node." msgstr "Devuelve el nodo final de la transicion dada." msgid "" "Returns [code]true[/code] if the graph contains the given animation node." msgstr "" "Devuelve [code]true[/code] si el gráfico contiene el nodo de animación dado." msgid "" "Returns [code]true[/code] if there is a transition between the given " "animation nodes." msgstr "" "Devuelve [code]true[/code] si hay una transición entre los nodos de animación " "dados." msgid "Deletes the given animation node from the graph." msgstr "Elimina el nodo de animación dado del gráfico." msgid "Deletes the transition between the two specified animation nodes." msgstr "Elimina la transición entre los dos nodos de animación especificados." msgid "Deletes the given transition by index." msgstr "Elimina la transicion dado un indice." msgid "Renames the given animation node." msgstr "Cambia el nombre del nodo de animación dado." msgid "Replaces the given animation node with a new animation node." msgstr "Reemplaza el nodo de animación dado con un nuevo nodo de animación." msgid "Sets the draw offset of the graph. Used for display in the editor." msgstr "" "Coloca el desplazamiento de dibujo del gráfico. Utilizado para " "visualizaciones en el editor." msgid "Sets the animation node's coordinates. Used for display in the editor." msgstr "" "Establece las coordenadas del nodo de animación. Se utiliza para visualizarlo " "en el editor." msgid "" "If [code]true[/code], allows teleport to the self state with [method " "AnimationNodeStateMachinePlayback.travel]. When the reset option is enabled " "in [method AnimationNodeStateMachinePlayback.travel], the animation is " "restarted. If [code]false[/code], nothing happens on the teleportation to the " "self state." msgstr "" "Si es [code]true[/code], permite teletransportarse al estado propio con " "[method AnimationNodeStateMachinePlayback.travel]. Cuando la opción de " "reinicio está activada en [method AnimationNodeStateMachinePlayback.travel], " "la animación se reinicia. Si es [code]false[/code], no ocurre nada en la " "teletransportación al estado propio." msgid "" "If [code]true[/code], treat the cross-fade to the start and end nodes as a " "blend with the RESET animation.\n" "In most cases, when additional cross-fades are performed in the parent " "[AnimationNode] of the state machine, setting this property to [code]false[/" "code] and matching the cross-fade time of the parent [AnimationNode] and the " "state machine's start node and end node gives good results." msgstr "" "Si es [code]true[/code], trata el fundido cruzado a los nodos de inicio y fin " "como una mezcla con la animación RESET.\n" "En la mayoría de los casos, cuando se realizan fundidos cruzados adicionales " "en el [AnimationNode] padre de la máquina de estados, establecer esta " "propiedad a [code]false[/code] y hacer coincidir el tiempo de fundido cruzado " "del [AnimationNode] padre con el de los nodos de inicio y fin de la máquina " "de estados da buenos resultados." msgid "" "This property can define the process of transitions for different use cases. " "See also [enum AnimationNodeStateMachine.StateMachineType]." msgstr "" "Esta propiedad puede definir el proceso de transiciones para diferentes casos " "de uso. Véase también [enum AnimationNodeStateMachine.StateMachineType]." msgid "" "Seeking to the beginning is treated as playing from the start state. " "Transition to the end state is treated as exiting the state machine." msgstr "" "Buscar el principio se trata como reproducir desde el estado inicial. La " "transición al estado final se trata como salir de la máquina de estados." msgid "" "Seeking to the beginning is treated as seeking to the beginning of the " "animation in the current state. Transition to the end state, or the absence " "of transitions in each state, is treated as exiting the state machine." msgstr "" "Buscar el principio se trata como buscar el principio de la animación en el " "estado actual. La transición al estado final, o la ausencia de transiciones " "en cada estado, se trata como salir de la máquina de estados." msgid "" "This is a grouped state machine that can be controlled from a parent state " "machine. It does not work independently. There must be a state machine with " "[member state_machine_type] of [constant STATE_MACHINE_TYPE_ROOT] or " "[constant STATE_MACHINE_TYPE_NESTED] in the parent or ancestor." msgstr "" "Esta es una máquina de estados agrupada que puede ser controlada desde una " "máquina de estados padre. No funciona de forma independiente. Debe haber una " "máquina de estados con [member state_machine_type] de [constant " "STATE_MACHINE_TYPE_ROOT] o [constant STATE_MACHINE_TYPE_NESTED] en el padre o " "ancestro." msgid "Provides playback control for an [AnimationNodeStateMachine]." msgstr "" "Proporciona control de reproducción para un [AnimationNodeStateMachine]." msgid "" "Allows control of [AnimationTree] state machines created with " "[AnimationNodeStateMachine]. Retrieve with [code]" "$AnimationTree.get(\"parameters/playback\")[/code].\n" "[codeblocks]\n" "[gdscript]\n" "var state_machine = $AnimationTree.get(\"parameters/playback\")\n" "state_machine.travel(\"some_state\")\n" "[/gdscript]\n" "[csharp]\n" "var stateMachine = GetNode(\"AnimationTree\").Get(\"parameters/" "playback\").As();\n" "stateMachine.Travel(\"some_state\");\n" "[/csharp]\n" "[/codeblocks]" msgstr "" "Permite controlar máquinas de estado de [AnimationTree] creadas con " "[AnimationNodeStateMachine]. Recupera con [code]" "$AnimationTree.get(\"parameters/playback\")[/code].\n" "[codeblocks]\n" "[gdscript]\n" "var state_machine = $AnimationTree.get(\"parameters/playback\")\n" "state_machine.travel(\"some_state\")\n" "[/gdscript]\n" "[csharp]\n" "var stateMachine = GetNode(\"AnimationTree\").Get(\"parameters/" "playback\").As();\n" "stateMachine.Travel(\"some_state\");\n" "[/csharp]\n" "[/codeblocks]" msgid "" "Returns the current state length.\n" "[b]Note:[/b] It is possible that any [AnimationRootNode] can be nodes as well " "as animations. This means that there can be multiple animations within a " "single state. Which animation length has priority depends on the nodes " "connected inside it. Also, if a transition does not reset, the remaining " "length at that point will be returned." msgstr "" "Devuelve la duración del estado actual.\n" "[b]Nota:[/b] Es posible que cualquier [AnimationRootNode] pueda ser tanto un " "nodo como una animación. Esto significa que puede haber múltiples animaciones " "dentro de un único estado. La duración de la animación que tiene prioridad " "depende de los nodos conectados en su interior. Además, si una transición no " "se reinicia, se devolverá la duración restante en ese punto." msgid "" "Returns the currently playing animation state.\n" "[b]Note:[/b] When using a cross-fade, the current state changes to the next " "state immediately after the cross-fade begins." msgstr "" "Devuelve el estado de animación que se está reproduciendo actualmente.\n" "[b]Nota:[/b] Al usar un fundido cruzado, el estado actual cambia al siguiente " "estado inmediatamente después de que comience el fundido cruzado." msgid "Returns the playback position within the current animation state." msgstr "" "Devuelve la posición de reproducción dentro del estado de animación actual." msgid "" "Returns the playback state length of the node from [method " "get_fading_from_node]. Returns [code]0[/code] if no animation fade is " "occurring." msgstr "" "Devuelve la duración del estado de reproducción del nodo desde [method " "get_fading_from_node]. Devuelve [code]0[/code] si no se produce ningún " "desvanecimiento de animación." msgid "Returns the starting state of currently fading animation." msgstr "" "Devuelve el estado inicial de la animación que se está desvaneciendo " "actualmente." msgid "" "Returns the playback position of the node from [method get_fading_from_node]. " "Returns [code]0[/code] if no animation fade is occurring." msgstr "" "Devuelve la posición de reproducción del nodo desde [method " "get_fading_from_node]. Devuelve [code]0[/code] si no se produce ningún " "desvanecimiento de animación." msgid "" "Returns the length of the current fade animation. Returns [code]0[/code] if " "no animation fade is occurring." msgstr "" "Devuelve la duración de la animación de fade (desvanecimiento) actual. " "Devuelve [code]0[/code] si no se está produciendo ningún fade " "(desvanecimiento) de animación." msgid "" "Returns the playback position of the current fade animation. Returns [code]0[/" "code] if no animation fade is occurring." msgstr "" "Devuelve la posición de reproducción de la animación de fade " "(desvanecimiento) actual. Devuelve [code]0[/code] si no se está produciendo " "ningún fade (desvanecimiento) de animación." msgid "" "Returns the current travel path as computed internally by the A* algorithm." msgstr "" "Devuelve la ruta de viaje actual calculada internamente por el algorithmo A*." msgid "Returns [code]true[/code] if an animation is playing." msgstr "Devuelve [code]true[/code] si una animación esta reproduciendose." msgid "" "If there is a next path by travel or auto advance, immediately transitions " "from the current state to the next state." msgstr "" "Si hay una siguiente ruta por recorrido (travel) o avance automático, " "transiciona inmediatamente del estado actual al siguiente estado." msgid "" "Starts playing the given animation.\n" "If [param reset] is [code]true[/code], the animation is played from the " "beginning." msgstr "" "Comienza a reproducir la animación dada.\n" "Si [param reset] es [code]true[/code], la animación se reproduce desde el " "principio." msgid "Stops the currently playing animation." msgstr "Para la animación en ejecucion." msgid "" "Transitions from the current state to another one, following the shortest " "path.\n" "If the path does not connect from the current state, the animation will play " "after the state teleports.\n" "If [param reset_on_teleport] is [code]true[/code], the animation is played " "from the beginning when the travel cause a teleportation." msgstr "" "Transiciona del estado actual a otro, siguiendo la ruta más corta.\n" "Si la ruta no conecta desde el estado actual, la animación se reproducirá " "después de que el estado se teletransporte.\n" "Si [param reset_on_teleport] es [code]true[/code], la animación se reproduce " "desde el principio cuando el recorrido causa una teletransportación." msgid "" "Emitted when the [param state] finishes playback. If [param state] is a state " "machine set to grouped mode, its signals are passed through with its name " "prefixed.\n" "If there is a crossfade, this will be fired when the influence of the [method " "get_fading_from_node] animation is no longer present." msgstr "" "Emitida cuando el [param state] finaliza la reproducción. Si [param state] es " "una máquina de estados configurada en modo agrupado, sus señales se " "transmiten con su nombre como prefijo.\n" "Si hay un fundido cruzado, se disparará cuando la influencia de la animación " "de [method get_fading_from_node] ya no esté presente." msgid "" "Emitted when the [param state] starts playback. If [param state] is a state " "machine set to grouped mode, its signals are passed through with its name " "prefixed." msgstr "" "Emitida cuando el [param state] inicia la reproducción. Si [param state] es " "una máquina de estados configurada en modo agrupado, sus señales se " "transmiten con su nombre como prefijo." msgid "" "A transition within an [AnimationNodeStateMachine] connecting two " "[AnimationRootNode]s." msgstr "" "Una transición dentro de un [AnimationNodeStateMachine] que conecta dos " "[AnimationRootNode]s." msgid "" "The path generated when using [method " "AnimationNodeStateMachinePlayback.travel] is limited to the nodes connected " "by [AnimationNodeStateMachineTransition].\n" "You can set the timing and conditions of the transition in detail." msgstr "" "La ruta generada al usar [method AnimationNodeStateMachinePlayback.travel] " "está limitada a los nodos conectados por " "[AnimationNodeStateMachineTransition].\n" "Puedes establecer el tiempo y las condiciones de la transición en detalle." msgid "" "Turn on auto advance when this condition is set. The provided name will " "become a boolean parameter on the [AnimationTree] that can be controlled from " "code (see [url=$DOCS_URL/tutorials/animation/animation_tree.html#controlling-" "from-code]Using AnimationTree[/url]). For example, if [member " "AnimationTree.tree_root] is an [AnimationNodeStateMachine] and [member " "advance_condition] is set to [code]\"idle\"[/code]:\n" "[codeblocks]\n" "[gdscript]\n" "$animation_tree.set(\"parameters/conditions/idle\", is_on_floor and " "(linear_velocity.x == 0))\n" "[/gdscript]\n" "[csharp]\n" "GetNode(\"animation_tree\").Set(\"parameters/conditions/" "idle\", IsOnFloor && (LinearVelocity.X == 0));\n" "[/csharp]\n" "[/codeblocks]" msgstr "" "Activa el avance automático cuando se establece esta condición. El nombre " "proporcionado se convertirá en un parámetro booleano en el [AnimationTree] " "que puede controlarse desde el código (véase [url=$DOCS_URL/tutorials/" "animation/animation_tree.html#controlling-from-code]Uso de AnimationTree[/" "url]). Por ejemplo, si [member AnimationTree.tree_root] es un " "[AnimationNodeStateMachine] y [member advance_condition] está establecido en " "[code]\"idle\"[/code]:\n" "[codeblocks]\n" "[gdscript]\n" "$animation_tree.set(\"parameters/conditions/idle\", is_on_floor and " "(linear_velocity.x == 0))\n" "[/gdscript]\n" "[csharp]\n" "GetNode(\"animation_tree\").Set(\"parameters/conditions/" "idle\", IsOnFloor && (LinearVelocity.X == 0));\n" "[/csharp]\n" "[/codeblocks]" msgid "" "Use an expression as a condition for state machine transitions. It is " "possible to create complex animation advance conditions for switching between " "states and gives much greater flexibility for creating complex state machines " "by directly interfacing with the script code." msgstr "" "Usa una expresión como condición para las transiciones de la máquina de " "estados. Es posible crear condiciones complejas de avance de animación para " "cambiar entre estados y da una flexibilidad mucho mayor para crear máquinas " "de estados complejas al interactuar directamente con el código del script." msgid "" "Determines whether the transition should be disabled, enabled when using " "[method AnimationNodeStateMachinePlayback.travel], or traversed automatically " "if the [member advance_condition] and [member advance_expression] checks are " "[code]true[/code] (if assigned)." msgstr "" "Determina si la transición debe ser deshabilitada, habilitada cuando se usa " "[method AnimationNodeStateMachinePlayback.travel], o recorrida " "automáticamente si las comprobaciones de [member advance_condition] y [member " "advance_expression] son [code]true[/code] (si están asignadas)." msgid "" "Lower priority transitions are preferred when travelling through the tree via " "[method AnimationNodeStateMachinePlayback.travel] or [member advance_mode] is " "set to [constant ADVANCE_MODE_AUTO]." msgstr "" "Se prefieren las transiciones de menor prioridad cuando se viaja a través del " "árbol a través de [method AnimationNodeStateMachinePlayback.travel] o si " "[member advance_mode] está configurado como [constant ADVANCE_MODE_AUTO]." msgid "" "If [code]true[/code], the destination animation is played back from the " "beginning when switched." msgstr "" "Si es [code]true[/code], la animación de destino se reproduce desde el " "principio cuando se cambia." msgid "The transition type." msgstr "El tipo de transicion." msgid "" "Ease curve for better control over cross-fade between this state and the " "next. Should be a unit [Curve]." msgstr "" "Curva de suavizado para un mejor control del fundido cruzado entre este " "estado y el siguiente. Debe ser una [Curve] de unidad." msgid "" "The time to cross-fade between this state and the next.\n" "[b]Note:[/b] [AnimationNodeStateMachine] transitions the current state " "immediately after the start of the fading. The precise remaining time can " "only be inferred from the main animation. When [AnimationNodeOutput] is " "considered as the most upstream, so the [member xfade_time] is not scaled " "depending on the downstream delta. See also [member " "AnimationNodeOneShot.fadeout_time]." msgstr "" "El tiempo para el fundido cruzado entre este estado y el siguiente.\n" "[b]Nota:[/b] [AnimationNodeStateMachine] transiciona el estado actual " "inmediatamente después del inicio del fundido. El tiempo restante preciso " "sólo puede inferirse de la animación principal. Cuando [AnimationNodeOutput] " "se considera como el más ascendente, el [member xfade_time] no se escala " "dependiendo del delta descendente. Véase también [member " "AnimationNodeOneShot.fadeout_time]." msgid "Emitted when [member advance_condition] is changed." msgstr "Emitida cuando [member advance_condition] cambia." msgid "" "Switch to the next state immediately. The current state will end and blend " "into the beginning of the new one." msgstr "" "Intercambia a el proximo estado inmediatamente. El actual estado terminara y " "se mezclara en el comienzo del nuevo." msgid "" "Switch to the next state immediately, but will seek the new state to the " "playback position of the old state." msgstr "" "Intercambia a el proximo estado inmediatamente, pero buscara el nuevo estado " "a la reproduccion de la posicion del antiguo estado." msgid "" "Wait for the current state playback to end, then switch to the beginning of " "the next state animation." msgstr "" "Espera a que termine el actual estado en reproduccion, entonces intercambia " "con el principio de la proxima animación." msgid "Don't use this transition." msgstr "No usar esta transición." msgid "" "Only use this transition during [method " "AnimationNodeStateMachinePlayback.travel]." msgstr "" "Utiliza esta transición únicamente durante [method " "AnimationNodeStateMachinePlayback.travel]." msgid "" "Automatically use this transition if the [member advance_condition] and " "[member advance_expression] checks are [code]true[/code] (if assigned)." msgstr "" "Utiliza automáticamente esta transición si las comprobaciones de [member " "advance_condition] y [member advance_expression] son [code]true[/code] (si " "están asignadas)." msgid "" "Blends two animations subtractively inside of an [AnimationNodeBlendTree]." msgstr "" "Combina dos animaciones de forma sustractiva dentro de un " "[AnimationNodeBlendTree]." msgid "" "A resource to add to an [AnimationNodeBlendTree]. Blends two animations " "subtractively based on the amount value.\n" "This animation node is usually used for pre-calculation to cancel out any " "extra poses from the animation for the \"add\" animation source in " "[AnimationNodeAdd2] or [AnimationNodeAdd3].\n" "In general, the blend value should be in the [code][0.0, 1.0][/code] range, " "but values outside of this range can be used for amplified or inverted " "animations.\n" "[b]Note:[/b] This calculation is different from using a negative value in " "[AnimationNodeAdd2], since the transformation matrices do not satisfy the " "commutative law. [AnimationNodeSub2] multiplies the transformation matrix of " "the inverted animation from the left side, while negative [AnimationNodeAdd2] " "multiplies it from the right side." msgstr "" "Es un recurso que se puede añadir a un [AnimationNodeBlendTree]. Combina dos " "animaciones de forma sustractiva en función del valor de cantidad.\n" "Este nodo de animación se suele utilizar para realizar cálculos previos con " "el objetivo de cancelar cualquier pose extra de la animación para el recurso " "\"añadir\" en [AnimationNodeAdd2] o [AnimationNodeAdd3].\n" "En general, el valor de mezcla debe estar en el rango de [code][0.0, 1.0][/" "code], pero se pueden usar valores fuera de este rango para amplificar o " "invertir animaciones.\n" "[b]Nota: [/b] Este cálculo es diferente a utilizar un valor negativo en " "[AnimationNodeAdd2], ya que la transformación de matrices no cumple la ley " "conmutativa. [AnimationNodeSub2] multiplica la matriz transformada de la " "animación invertida desde el lado izquierdo, mientras que el " "[AnimationNodeAdd2] negativo lo multiplica del lado derecho." msgid "AnimationTree" msgstr "Árbol de Animación" msgid "" "Base class for [AnimationNode]s with multiple input ports that must be " "synchronized." msgstr "" "Clase base para [AnimationNode] con múltiples puertos de entrada que deben " "estar sincronizados." msgid "" "An animation node used to combine, mix, or blend two or more animations " "together while keeping them synchronized within an [AnimationTree]." msgstr "" "Un nodo de animación usado para combinar, mezclar o fundir dos o más " "animaciones y mantenerlas sincronizadas dentro de un [AnimationTree]." msgid "" "If [code]false[/code], the blended animations' frame are stopped when the " "blend value is [code]0[/code].\n" "If [code]true[/code], forcing the blended animations to advance frame." msgstr "" "Si es [code]false[/code], los fotogramas de las animaciones mezcladas se " "detienen cuando el valor de la mezcla es [code]0[/code].\n" "Si es [code]true[/code], fuerza a las animaciones mezcladas a avanzar de " "fotograma." msgid "A time-scaling animation node used in [AnimationTree]." msgstr "Un nodo de animación de escala de tiempo utilizado en [AnimationTree]." msgid "" "Allows to scale the speed of the animation (or reverse it) in any child " "[AnimationNode]s. Setting it to [code]0.0[/code] will pause the animation." msgstr "" "Permite ajustar la velocidad de la animación (o invertirla) en cualquier " "[AnimationNode] secundario. Al establecerlo en [code]0.0[/code], la animación " "se pausará." msgid "A time-seeking animation node used in [AnimationTree]." msgstr "" "Un nodo de animación de búsqueda de tiempo utilizado en [AnimationTree]." msgid "" "This animation node can be used to cause a seek command to happen to any sub-" "children of the animation graph. Use to play an [Animation] from the start or " "a certain playback position inside the [AnimationNodeBlendTree].\n" "After setting the time and changing the animation playback, the time seek " "node automatically goes into sleep mode on the next process frame by setting " "its [code]seek_request[/code] value to [code]-1.0[/code].\n" "[codeblocks]\n" "[gdscript]\n" "# Play child animation from the start.\n" "animation_tree.set(\"parameters/TimeSeek/seek_request\", 0.0)\n" "# Alternative syntax (same result as above).\n" "animation_tree[\"parameters/TimeSeek/seek_request\"] = 0.0\n" "\n" "# Play child animation from 12 second timestamp.\n" "animation_tree.set(\"parameters/TimeSeek/seek_request\", 12.0)\n" "# Alternative syntax (same result as above).\n" "animation_tree[\"parameters/TimeSeek/seek_request\"] = 12.0\n" "[/gdscript]\n" "[csharp]\n" "// Play child animation from the start.\n" "animationTree.Set(\"parameters/TimeSeek/seek_request\", 0.0);\n" "\n" "// Play child animation from 12 second timestamp.\n" "animationTree.Set(\"parameters/TimeSeek/seek_request\", 12.0);\n" "[/csharp]\n" "[/codeblocks]" msgstr "" "Este nodo de animación puede ser utilizado para generar un comando de " "búsqueda en cualquier subelemento de la grafica de animación. Utilizable para " "reproducir un [Animation] desde el inicio o una posición especifica de la " "repetición dentro de [AnimationNodeBlendTree].\n" "Despues de configurar el tiempo y cambiar la reproducción de la animación, el " "tiempo que tarda el nodo de búsqueda automaticamente en entrar en modo de " "reposo en el siguiente cuadro de proceso por defecto es [code]seek_request[/" "code]value to [code]-1.0[/code]\n" "[codeblocks]\n" "[gdscript]\n" "#Reproducir animación hija desde el inicio.\n" "animation_tree.set(\"parameters/TimeSeek/seek_request\",0.0)\n" "#Sintaxis alternativa(Mismo resultado al de arriba).\n" "animation_tree.set[\"parameters/TimeSeek/seek_request\"] = 0.0\n" "\n" "#Reproducir animación hija a partir del segundo 12.\n" "animation_tree.set(\"parameters/TimeSeek/seek_request\",12.0)\n" "#Sintaxis alternativa(Mismo resultado al de arriba).\n" "animation_tree.set[\"parameters/TimeSeek/seek_request\"] = 12.0\n" "[/gdscript]\n" "[csharp]\n" "//Reproducir animación hija desde el inicio.\n" "animation_tree.set(\"parameters/TimeSeek/seek_request\",0.0)\n" "\n" "//Reproducir animación hija a partir del segundo 12.\n" "animation_tree.set(\"parameters/TimeSeek/seek_request\",12.0)\n" "[/csharp]\n" "[/codeblocks]" msgid "" "If [code]true[/code], some processes are executed to handle keys between " "seeks, such as calculating root motion and finding the nearest discrete key." msgstr "" "Si es [code]true[/code], se ejecutan algunos procesos para manejar las claves " "entre búsquedas, como el cálculo del movimiento de raíz y la búsqueda de la " "clave discreta más cercana." msgid "A transition within an [AnimationTree] connecting two [AnimationNode]s." msgstr "" "Una transición dentro de un [AnimationTree] que conecta dos [AnimationNode]." msgid "" "Simple state machine for cases which don't require a more advanced " "[AnimationNodeStateMachine]. Animations can be connected to the inputs and " "transition times can be specified.\n" "After setting the request and changing the animation playback, the transition " "node automatically clears the request on the next process frame by setting " "its [code]transition_request[/code] value to empty.\n" "[b]Note:[/b] When using a cross-fade, [code]current_state[/code] and " "[code]current_index[/code] change to the next state immediately after the " "cross-fade begins.\n" "[codeblocks]\n" "[gdscript]\n" "# Play child animation connected to \"state_2\" port.\n" "animation_tree.set(\"parameters/Transition/transition_request\", " "\"state_2\")\n" "# Alternative syntax (same result as above).\n" "animation_tree[\"parameters/Transition/transition_request\"] = \"state_2\"\n" "\n" "# Get current state name (read-only).\n" "animation_tree.get(\"parameters/Transition/current_state\")\n" "# Alternative syntax (same result as above).\n" "animation_tree[\"parameters/Transition/current_state\"]\n" "\n" "# Get current state index (read-only).\n" "animation_tree.get(\"parameters/Transition/current_index\")\n" "# Alternative syntax (same result as above).\n" "animation_tree[\"parameters/Transition/current_index\"]\n" "[/gdscript]\n" "[csharp]\n" "// Play child animation connected to \"state_2\" port.\n" "animationTree.Set(\"parameters/Transition/transition_request\", " "\"state_2\");\n" "\n" "// Get current state name (read-only).\n" "animationTree.Get(\"parameters/Transition/current_state\");\n" "\n" "// Get current state index (read-only).\n" "animationTree.Get(\"parameters/Transition/current_index\");\n" "[/csharp]\n" "[/codeblocks]" msgstr "" "Máquina de estados sencilla para casos que no requieren un " "[AnimationNodeStateMachine] más avanzado. Las animaciones pueden conectarse a " "las entradas y se pueden especificar los tiempos de transición.\n" "Después de establecer la solicitud y cambiar la reproducción de la animación, " "el nodo de transición automáticamente borra la solicitud en el siguiente " "fotograma de procesamiento al establecer su valor [code]transition_request[/" "code] como vacío.\n" "[b]Nota:[/b] Al usar un cross-fade, [code]current_state[/code] y " "[code]current_index[/code] cambian al siguiente estado inmediatamente después " "de que comienza el cross-fade.\n" "[codeblocks]\n" "[gdscript]\n" "# Reproducir la animación hija conectada al puerto \"state_2\".\n" "animation_tree.set(\"parameters/Transition/transition_request\", " "\"state_2\")\n" "# Sintaxis alternativa (mismo resultado que arriba).\n" "animation_tree[\"parameters/Transition/transition_request\"] = \"state_2\"\n" "\n" "# Obtener el nombre del estado actual (solo lectura).\n" "animation_tree.get(\"parameters/Transition/current_state\")\n" "# Sintaxis alternativa (mismo resultado que arriba).\n" "animation_tree[\"parameters/Transition/current_state\"]\n" "\n" "# Obtener el índice del estado actual (solo lectura).\n" "animation_tree.get(\"parameters/Transition/current_index\")\n" "# Sintaxis alternativa (mismo resultado que arriba).\n" "animation_tree[\"parameters/Transition/current_index\"]\n" "[/gdscript]\n" "[csharp]\n" "// Reproducir la animación hija conectada al puerto \"state_2\".\n" "animationTree.Set(\"parameters/Transition/transition_request\", " "\"state_2\");\n" "\n" "// Obtener el nombre del estado actual (solo lectura).\n" "animationTree.Get(\"parameters/Transition/current_state\");\n" "\n" "// Obtener el índice del estado actual (solo lectura).\n" "animationTree.Get(\"parameters/Transition/current_index\");\n" "[/csharp]\n" "[/codeblocks]" msgid "" "Returns whether the animation breaks the loop at the end of the loop cycle " "for transition." msgstr "" "Devuelve si la animación interrumpe el bucle al final del ciclo de bucle para " "la transición." msgid "" "Returns whether the animation restarts when the animation transitions from " "the other animation." msgstr "" "Devuelve si la animación se reinicia cuando la animación pasa de la otra " "animación." msgid "" "Returns [code]true[/code] if auto-advance is enabled for the given [param " "input] index." msgstr "" "Devuelve [code]true[/code] si el avance automático está habilitado para el " "índice de [param input] dado." msgid "" "Enables or disables auto-advance for the given [param input] index. If " "enabled, state changes to the next input after playing the animation once. If " "enabled for the last input state, it loops to the first." msgstr "" "Habilita o deshabilita el avance automático para el índice de [param input] " "dado. Si está habilitado, el estado cambia a la siguiente entrada después de " "reproducir la animación una vez. Si está habilitado para el último estado de " "entrada, vuelve al primero." msgid "" "If [code]true[/code], the destination animation is restarted when the " "animation transitions." msgstr "" "Si es [code]true[/code], la animación de destino se reinicia cuando la " "animación realiza la transición." msgid "" "If [code]true[/code], allows transition to the self state. When the reset " "option is enabled in input, the animation is restarted. If [code]false[/" "code], nothing happens on the transition to the self state." msgstr "" "Si es [code]true[/code], permite la transición al estado propio. Cuando la " "opción de reinicio está habilitada en la entrada, la animación se reinicia. " "Si es [code]false[/code], no sucede nada en la transición al estado propio." msgid "The number of enabled input ports for this animation node." msgstr "" "El número de puertos de entrada habilitados para este nodo de animación." msgid "" "Cross-fading time (in seconds) between each animation connected to the " "inputs.\n" "[b]Note:[/b] [AnimationNodeTransition] transitions the current state " "immediately after the start of the fading. The precise remaining time can " "only be inferred from the main animation. When [AnimationNodeOutput] is " "considered as the most upstream, so the [member xfade_time] is not scaled " "depending on the downstream delta. See also [member " "AnimationNodeOneShot.fadeout_time]." msgstr "" "La duración del cross-fading (en segundos) entre cada animación conecta las " "entradas.\n" "[b]Note:[/b] [AnimationNodeTransition] transiciona el estado actual " "inmediatamente después de iniciar el fading. El tiempo restante exacto solo " "puede ser inferido de la ai¿nimación principal. Cuando [AnimationNodeOutput] " "es considerado el punto más alto, mientras el [member xfade_time] no se " "escala en función del delta downstream. Véase también [member " "AnimationNodeOneShot.fadeout_time]." msgid "A node used for animation playback." msgstr "Un nodo utilizado para la reproducción de animación." msgid "" "An animation player is used for general-purpose playback of animations. It " "contains a dictionary of [AnimationLibrary] resources and custom blend times " "between animation transitions.\n" "Some methods and properties use a single key to reference an animation " "directly. These keys are formatted as the key for the library, followed by a " "forward slash, then the key for the animation within the library, for example " "[code]\"movement/run\"[/code]. If the library's key is an empty string (known " "as the default library), the forward slash is omitted, being the same key " "used by the library.\n" "[AnimationPlayer] is better-suited than [Tween] for more complex animations, " "for example ones with non-trivial timings. It can also be used over [Tween] " "if the animation track editor is more convenient than doing it in code.\n" "Updating the target properties of animations occurs at the process frame." msgstr "" "Un reproductor de animación se utiliza para la reproducción de propósito " "general de animaciones. Contiene un diccionario de recursos " "[AnimationLibrary] y tiempos de mezcla personalizados entre transiciones de " "animación.\n" "Algunos métodos y propiedades usan una única clave para referenciar una " "animación directamente. Estas claves tienen el formato de la clave de la " "biblioteca, seguida de una barra inclinada y luego la clave de la animación " "dentro de la biblioteca, por ejemplo [code]\"movement/run\"[/code]. Si la " "clave de la biblioteca es una string vacía (conocida como la biblioteca " "predeterminada), la barra inclinada se omite, siendo la misma clave utilizada " "por la biblioteca.\n" "[AnimationPlayer] es más adecuado que [Tween] para animaciones más complejas, " "por ejemplo, aquellas con temporizaciones no triviales. También puede usarse " "en lugar de [Tween] si el editor de pistas de animación es más conveniente " "que hacerlo en código.\n" "La actualización de las propiedades objetivo de las animaciones ocurre en el " "fotograma de proceso." msgid "" "Returns the key of the animation which is queued to play after the [param " "animation_from] animation." msgstr "" "Devuelve la clave de la animación que está en cola para reproducirse después " "de la animación [param animation_from]." msgid "" "Triggers the [param animation_to] animation when the [param animation_from] " "animation completes." msgstr "" "Dispara la animación [param animation_to] cuando la animación [param " "animation_from] se completa." msgid "Clears all queued, unplayed animations." msgstr "Limpia todas las colas, animaciones no reproducidas." msgid "" "Returns the blend time (in seconds) between two animations, referenced by " "their keys." msgstr "" "Devuelve el tiempo de fusión (en segundos) entre dos animaciones, " "referenciado por sus claves." msgid "Use [member AnimationMixer.callback_mode_method] instead." msgstr "Utiliza [member AnimationMixer.callback_mode_method] en su lugar." msgid "Returns the call mode used for \"Call Method\" tracks." msgstr "" "Devuelve el modo de llamada utilizado para las pistas de \"Call Method\"." msgid "Use [member AnimationMixer.callback_mode_process] instead." msgstr "Utiliza [member AnimationMixer.callback_mode_process] en su lugar." msgid "Returns the process notification in which to update animations." msgstr "" "Devuelve la notificación del proceso en el que se actualizarán las " "animaciones." msgid "Returns a list of the animation keys that are currently queued to play." msgstr "" "Devuelve una lista de las claves de animación que están actualmente en cola " "para reproducirse." msgid "Use [member AnimationMixer.root_node] instead." msgstr "Utiliza [member AnimationMixer.root_node] en su lugar." msgid "Returns the node which node path references will travel from." msgstr "" "Devuelve el nodo desde el cual viajarán las referencias de la ruta de nodos." msgid "Returns the end time of the section currently being played." msgstr "" "Devuelve el tiempo de finalización de la sección que se está reproduciendo " "actualmente." msgid "Returns the start time of the section currently being played." msgstr "" "Devuelve el tiempo de inicio de la sección que se está reproduciendo " "actualmente." msgid "" "Returns [code]true[/code] if an animation is currently playing with a section." msgstr "" "Devuelve [code]true[/code] si una animación se está reproduciendo actualmente " "con una sección." msgid "" "Returns [code]true[/code] if the an animation is currently active. An " "animation is active if it was played by calling [method play] and was not " "finished yet, or was stopped by calling [method stop].\n" "This can be used to check whether an animation is currently paused or " "stopped.\n" "[codeblock]\n" "var is_paused = not is_playing() and is_animation_active()\n" "var is_stopped = not is_playing() and not is_animation_active()\n" "[/codeblock]" msgstr "" "Devuelve[code]true[/code] si hay una animación activa. Una animación se " "considera activa cuando se ha empezado a reproducir utilizando [method play] " "y no ha terminado aún, o sido detenida con [method stop]\n" "Sirve para comprobar si una animación está en pausa o detenida.\n" "[codeblock]\n" "var is_paused = not is_playing() and is_animation_active()\n" "var is_stopped = not is_playing() and not is_animation_active()\n" "[/codeblock]" msgid "" "Pauses the currently playing animation. The [member " "current_animation_position] will be kept and calling [method play] or [method " "play_backwards] without arguments or with the same animation name as [member " "assigned_animation] will resume the animation.\n" "See also [method stop]." msgstr "" "Pausa la animación que se está reproduciendo actualmente. Se mantendrá el " "[member current_animation_position] y llamar a [method play] o [method " "play_backwards] sin argumentos o con el mismo nombre de animación que [member " "assigned_animation] reanudará la animación.\n" "Véase también [method stop]." msgid "" "Plays the animation with key [param name]. Custom blend times and speed can " "be set.\n" "The [param from_end] option only affects when switching to a new animation " "track, or if the same track but at the start or end. It does not affect " "resuming playback that was paused in the middle of an animation. If [param " "custom_speed] is negative and [param from_end] is [code]true[/code], the " "animation will play backwards (which is equivalent to calling [method " "play_backwards]).\n" "The [AnimationPlayer] keeps track of its current or last played animation " "with [member assigned_animation]. If this method is called with that same " "animation [param name], or with no [param name] parameter, the assigned " "animation will resume playing if it was paused.\n" "[b]Note:[/b] The animation will be updated the next time the " "[AnimationPlayer] is processed. If other variables are updated at the same " "time this is called, they may be updated too early. To perform the update " "immediately, call [code]advance(0)[/code]." msgstr "" "Reproduce la animación con la clave [param name]. Se pueden establecer " "tiempos de mezcla y velocidad personalizados.\n" "La opción [param from_end] solo afecta al cambiar a una nueva pista de " "animación, o si es la misma pista pero al inicio o al final. No afecta a " "reanudar la reproducción que fue pausada en medio de una animación. Si [param " "custom_speed] es negativo y [param from_end] es [code]true[/code], la " "animación se reproducirá hacia atrás (lo cual es equivalente a llamar a " "[method play_backwards]).\n" "El [AnimationPlayer] mantiene un registro de su animación actual o la última " "reproducida con [member assigned_animation]. Si este método se llama con ese " "mismo [param name] de animación, o sin el parámetro [param name], la " "animación asignada se reanudará si estaba pausada.\n" "[b]Nota:[/b] La animación se actualizará la próxima vez que se procese el " "[AnimationPlayer]. Si otras variables se actualizan al mismo tiempo que se " "llama a esto, pueden actualizarse demasiado pronto. Para realizar la " "actualización inmediatamente, llama a [code]advance(0)[/code]." msgid "" "Plays the animation with key [param name] and the section starting from " "[param start_time] and ending on [param end_time]. See also [method play].\n" "Setting [param start_time] to a value outside the range of the animation " "means the start of the animation will be used instead, and setting [param " "end_time] to a value outside the range of the animation means the end of the " "animation will be used instead. [param start_time] cannot be equal to [param " "end_time]." msgstr "" "Reproduce la animación con la clave [param name] y la sección que comienza en " "[param start_time] y termina en [param end_time]. Véase también [method " "play].\n" "Establecer [param start_time] a un valor fuera del rango de la animación " "significa que se usará el inicio de la animación en su lugar, y establecer " "[param end_time] a un valor fuera del rango de la animación significa que se " "usará el final de la animación en su lugar. [param start_time] no puede ser " "igual a [param end_time]." msgid "" "Plays the animation with key [param name] and the section starting from " "[param start_time] and ending on [param end_time] in reverse.\n" "This method is a shorthand for [method play_section] with [code]custom_speed " "= -1.0[/code] and [code]from_end = true[/code], see its description for more " "information." msgstr "" "Reproduce la animación con la clave [param name] y la sección que comienza en " "[param start_time] y termina en [param end_time] en reversa.\n" "Este método es una abreviatura de [method play_section] con " "[code]custom_speed = -1.0[/code] y [code]from_end = true[/code], consulta su " "descripción para más información." msgid "" "Plays the animation with key [param name] and the section starting from " "[param start_marker] and ending on [param end_marker].\n" "If the start marker is empty, the section starts from the beginning of the " "animation. If the end marker is empty, the section ends on the end of the " "animation. See also [method play]." msgstr "" "Reproduce la animación con la clave [param name] y la sección que comienza en " "el marcador [param start_marker] y termina en [param end_marker].\n" "Si el marcador de inicio está vacío, la sección comienza desde el principio " "de la animación. Si el marcador de fin está vacío, la sección termina al " "final de la animación. Véase también [method play]." msgid "" "Plays the animation with key [param name] and the section starting from " "[param start_marker] and ending on [param end_marker] in reverse.\n" "This method is a shorthand for [method play_section_with_markers] with " "[code]custom_speed = -1.0[/code] and [code]from_end = true[/code], see its " "description for more information." msgstr "" "Reproduce la animación con la clave [param name] y la sección que comienza en " "el marcador [param start_marker] y termina en el marcador [param end_marker] " "en reversa.\n" "Este método es una abreviatura de [method play_section_with_markers] con " "[code]custom_speed = -1.0[/code] y [code]from_end = true[/code], consulta su " "descripción para más información." msgid "" "See also [method AnimationMixer.capture].\n" "You can use this method to use more detailed options for capture than those " "performed by [member playback_auto_capture]. When [member " "playback_auto_capture] is [code]false[/code], this method is almost the same " "as the following:\n" "[codeblock]\n" "capture(name, duration, trans_type, ease_type)\n" "play(name, custom_blend, custom_speed, from_end)\n" "[/codeblock]\n" "If [param name] is blank, it specifies [member assigned_animation].\n" "If [param duration] is a negative value, the duration is set to the interval " "between the current position and the first key, when [param from_end] is " "[code]true[/code], uses the interval between the current position and the " "last key instead.\n" "[b]Note:[/b] The [param duration] takes [member speed_scale] into account, " "but [param custom_speed] does not, because the capture cache is interpolated " "with the blend result and the result may contain multiple animations." msgstr "" "Véase también [method AnimationMixer.capture].\n" "Se puede usar este método para emplear opciones de captura más detalladas que " "las realizadas por [member playback_auto_capture]. Cuando [member " "playback_auto_capture] es [code]false[/code], este método es casi igual a lo " "siguiente:\n" "[codeblock]\n" "capture(name, duration, trans_type, ease_type)\n" "play(name, custom_blend, custom_speed, from_end)\n" "[/codeblock]\n" "Si [param name] está vacío, se utilizará [member assigned_animation].\n" "Si [param duration] es un valor negativo, la duración se establece en el " "intervalo entre la posición actual y la primera clave; cuando [param " "from_end] es [code]true[/code], en su lugar se usa el intervalo entre la " "posición actual y la última clave.\n" "[b]Nota:[/b] La [param duration] tiene en cuenta [member speed_scale], pero " "[param custom_speed] no, porque la caché de captura se interpola con el " "resultado de la mezcla, y dicho resultado puede contener múltiples " "animaciones." msgid "" "Queues an animation for playback once the current animation and all " "previously queued animations are done.\n" "[b]Note:[/b] If a looped animation is currently playing, the queued animation " "will never play unless the looped animation is stopped somehow." msgstr "" "Pone en cola una animación para su reproducción una vez que la animación " "actual y todas las animaciones previamente encoladas hayan terminado.\n" "[b]Nota:[/b] Si una animación en bucle se está reproduciendo actualmente, la " "animación en cola nunca se reproducirá a menos que la animación en bucle se " "detenga de alguna manera." msgid "Resets the current section. Does nothing if a section has not been set." msgstr "" "Restablece la sección actual. No realiza ninguna acción si no se ha definido " "una sección." msgid "" "Seeks the animation to the [param seconds] point in time (in seconds). If " "[param update] is [code]true[/code], the animation updates too, otherwise it " "updates at process time. Events between the current frame and [param seconds] " "are skipped.\n" "If [param update_only] is [code]true[/code], the method / audio / animation " "playback tracks will not be processed.\n" "[b]Note:[/b] Seeking to the end of the animation doesn't emit [signal " "AnimationMixer.animation_finished]. If you want to skip animation and emit " "the signal, use [method AnimationMixer.advance]." msgstr "" "Busca la animación hasta el punto en el tiempo [param seconds] (en segundos). " "Si [param update] es [code]true[/code], la animación también se actualiza; de " "lo contrario, se actualiza en el tiempo de procesado. Los eventos entre el " "fotograma actual y [param seconds] se omiten.\n" "Si [param update_only] es [code]true[/code], las pistas de reproducción de " "método/audio/animación no se procesarán.\n" "[b]Nota:[/b] Buscar hasta el final de la animación no emite [signal " "AnimationMixer.animation_finished]. Si quieres saltar la animación y emitir " "la señal, usa [method AnimationMixer.advance]." msgid "" "Specifies a blend time (in seconds) between two animations, referenced by " "their keys." msgstr "" "Especifica un tiempo de mezcla (en segundos) entre dos animaciones, " "referenciadas por sus nombres." msgid "Sets the call mode used for \"Call Method\" tracks." msgstr "" "Establece el modo de llamada usado para las pistas de \"Método de llamada\"." msgid "Sets the process notification in which to update animations." msgstr "" "Establece la notificación de proceso en la que se actualizan las animaciones." msgid "Sets the node which node path references will travel from." msgstr "" "Establece el nodo desde el cual viajarán las referencias de la ruta de nodos." msgid "" "Changes the start and end times of the section being played. The current " "playback position will be clamped within the new section. See also [method " "play_section]." msgstr "" "Cambia los tiempos de inicio y fin de la sección que se está reproduciendo. " "La posición de reproducción actual se limitará dentro de la nueva sección. " "Véase también [method play_section]." msgid "" "Changes the start and end markers of the section being played. The current " "playback position will be clamped within the new section. See also [method " "play_section_with_markers].\n" "If the argument is empty, the section uses the beginning or end of the " "animation. If both are empty, it means that the section is not set." msgstr "" "Cambia los marcadores de inicio y fin de la sección que se está " "reproduciendo. La posición de reproducción actual se limitará dentro de la " "nueva sección. Véase también [method play_section_with_markers].\n" "Si el argumento está vacío, la sección utiliza el principio o el final de la " "animación. Si ambos están vacíos, significa que la sección no está " "establecida." msgid "" "Stops the currently playing animation. The animation position is reset to " "[code]0[/code] and the [code]custom_speed[/code] is reset to [code]1.0[/" "code]. See also [method pause].\n" "If [param keep_state] is [code]true[/code], the animation state is not " "updated visually.\n" "[b]Note:[/b] The method / audio / animation playback tracks will not be " "processed by this method." msgstr "" "Detiene la animación que se está reproduciendo actualmente. La posición de la " "animación se restablece a [code]0[/code] y la [code]custom_speed[/code] se " "restablece a [code]1.0[/code]. Véase también [method pause].\n" "Si [param keep_state] es [code]true[/code], el estado de la animación no se " "actualiza visualmente.\n" "[b]Nota:[/b] Los métodos / audio / pistas de reproducción de animación no " "serán procesados por este método." msgid "" "If playing, the current animation's key, otherwise, the animation last " "played. When set, this changes the animation, but will not play it unless " "already playing. See also [member current_animation]." msgstr "" "Si se está reproduciendo, la clave de la animación actual; en caso contrario, " "la de la última animación reproducida. Cuando se establece, esto cambia la " "animación, pero no la reproducirá a menos que ya se esté reproduciendo. Véase " "también [member current_animation]." msgid "" "The key of the currently playing animation. If no animation is playing, the " "property's value is an empty string. Changing this value does not restart the " "animation. See [method play] for more information on playing animations.\n" "[b]Note:[/b] While this property appears in the Inspector, it's not meant to " "be edited, and it's not saved in the scene. This property is mainly used to " "get the currently playing animation, and internally for animation playback " "tracks. For more information, see [Animation]." msgstr "" "La clave de la animación que se está reproduciendo actualmente. Si no se está " "reproduciendo ninguna animación, el valor de la propiedad es una string " "vacía. Cambiar este valor no reinicia la animación. Véase [method play] para " "más información sobre la reproducción de animaciones.\n" "[b]Nota:[/b] Aunque esta propiedad aparece en el Inspector, no está pensada " "para ser editada y no se guarda en la escena. Esta propiedad se usa " "principalmente para obtener la animación que se está reproduciendo " "actualmente, e internamente para las pistas de reproducción de animación. " "Para más información, véase [Animation]." msgid "The length (in seconds) of the currently playing animation." msgstr "" "La duración (en segundos) de la animación que se está reproduciendo " "actualmente." msgid "The position (in seconds) of the currently playing animation." msgstr "La posición (en segundos) de la animación que se está reproduciendo." msgid "" "If [code]true[/code] and the engine is running in Movie Maker mode (see " "[MovieWriter]), exits the engine with [method SceneTree.quit] as soon as an " "animation is done playing in this [AnimationPlayer]. A message is printed " "when the engine quits for this reason.\n" "[b]Note:[/b] This obeys the same logic as the [signal " "AnimationMixer.animation_finished] signal, so it will not quit the engine if " "the animation is set to be looping." msgstr "" "Si es [code]true[/code] y el motor se está ejecutando en modo Movie Maker " "(ver [MovieWriter]), sale del motor con [method SceneTree.quit] tan pronto " "como una animación termine de reproducirse en este [AnimationPlayer]. Se " "imprime un mensaje cuando el motor se cierra por este motivo.\n" "[b]Nota:[/b] Esto obedece la misma lógica que la señal [signal " "AnimationMixer.animation_finished], por lo que no cerrará el motor si la " "animación está configurada para reproducirse en bucle." msgid "" "If [code]true[/code], performs [method AnimationMixer.capture] before " "playback automatically. This means just [method play_with_capture] is " "executed with default arguments instead of [method play].\n" "[b]Note:[/b] Capture interpolation is only performed if the animation " "contains a capture track. See also [constant Animation.UPDATE_CAPTURE]." msgstr "" "Si es [code]true[/code], realiza [method AnimationMixer.capture] antes de la " "reproducción automáticamente. Esto significa que se ejecuta simplemente " "[method play_with_capture] con argumentos por defecto en lugar de [method " "play].\n" "[b]Nota:[/b] La interpolación de captura solo se realiza si la animación " "contiene una pista de captura. Véase también [constant " "Animation.UPDATE_CAPTURE]." msgid "" "See also [method play_with_capture] and [method AnimationMixer.capture].\n" "If [member playback_auto_capture_duration] is negative value, the duration is " "set to the interval between the current position and the first key." msgstr "" "Véase también [method play_with_capture] y [method AnimationMixer.capture].\n" "Si [member playback_auto_capture_duration] es un value negativo, la duración " "se establece al intervalo entre la posición actual y la primera key." msgid "" "The ease type of the capture interpolation. See also [enum Tween.EaseType]." msgstr "" "El tipo de facilidad de la interpolación de captura. Véase también [enum " "Tween.EaseType]." msgid "" "The transition type of the capture interpolation. See also [enum " "Tween.TransitionType]." msgstr "" "El tipo de transición de la interpolación de captura. Véase [enum " "Tween.TransitionType]." msgid "" "The default time in which to blend animations. Ranges from 0 to 4096 with " "0.01 precision." msgstr "" "El tiempo por defecto para mezclar las animaciones. Va de 0 a 4096 con una " "precisión de 0,01." msgid "" "Emitted when a queued animation plays after the previous animation finished. " "See also [method AnimationPlayer.queue].\n" "[b]Note:[/b] The signal is not emitted when the animation is changed via " "[method AnimationPlayer.play] or by an [AnimationTree]." msgstr "" "Emitida cuando una animación en cola se reproduce después de que la animación " "anterior haya terminado. Véase también [method AnimationPlayer.queue].\n" "[b]Nota:[/b] La señal no se emite cuando la animación se cambia a través de " "[method AnimationPlayer.play] o por un [AnimationTree]." msgid "Emitted when [member current_animation] changes." msgstr "Emitida cuando [member current_animation] cambia." msgid "See [constant AnimationMixer.ANIMATION_CALLBACK_MODE_PROCESS_PHYSICS]." msgstr "" "Véase [constant AnimationMixer.ANIMATION_CALLBACK_MODE_PROCESS_PHYSICS]." msgid "See [constant AnimationMixer.ANIMATION_CALLBACK_MODE_PROCESS_IDLE]." msgstr "Véase [constant AnimationMixer.ANIMATION_CALLBACK_MODE_PROCESS_IDLE]." msgid "See [constant AnimationMixer.ANIMATION_CALLBACK_MODE_PROCESS_MANUAL]." msgstr "Véase [constant AnimationMixer.ANIMATION_CALLBACK_MODE_PROCESS_MANUAL]." msgid "See [constant AnimationMixer.ANIMATION_CALLBACK_MODE_METHOD_DEFERRED]." msgstr "" "Véase [constant AnimationMixer.ANIMATION_CALLBACK_MODE_METHOD_DEFERRED]." msgid "See [constant AnimationMixer.ANIMATION_CALLBACK_MODE_METHOD_IMMEDIATE]." msgstr "" "Véase [constant AnimationMixer.ANIMATION_CALLBACK_MODE_METHOD_IMMEDIATE]." msgid "" "Base class for [AnimationNode]s that hold one or multiple composite " "animations. Usually used for [member AnimationTree.tree_root]." msgstr "" "Clase base para [AnimationNode]s que contienen una o varias animaciones " "compuestas. Se usa habitualmente para [member AnimationTree.tree_root]." msgid "" "[AnimationRootNode] is a base class for [AnimationNode]s that hold a complete " "animation. A complete animation refers to the output of an " "[AnimationNodeOutput] in an [AnimationNodeBlendTree] or the output of another " "[AnimationRootNode]. Used for [member AnimationTree.tree_root] or in other " "[AnimationRootNode]s.\n" "Examples of built-in root nodes include [AnimationNodeBlendTree] (allows " "blending nodes between each other using various modes), " "[AnimationNodeStateMachine] (allows to configure blending and transitions " "between nodes using a state machine pattern), [AnimationNodeBlendSpace2D] " "(allows linear blending between [b]three[/b] [AnimationNode]s), " "[AnimationNodeBlendSpace1D] (allows linear blending only between [b]two[/b] " "[AnimationNode]s)." msgstr "" "La clase [AnimationRootNode] es una clase base para los nodos [AnimationNode] " "que contienen una animación completa. Una animación completa se refiere a la " "salida de un [AnimationNodeOutput] en un [AnimationNodeBlendTree] o a la " "salida de otro [AnimationRootNode]. Se utiliza con [member " "AnimationTree.tree_root] o dentro de otros [AnimationRootNode].\n" "Algunos ejemplos de nodos raíz integrados incluyen [AnimationNodeBlendTree] " "(permite mezclar nodos entre sí usando varios modos), " "[AnimationNodeStateMachine] (permite configurar la mezcla y las transiciones " "entre nodos utilizando un patrón de máquina de estados), " "[AnimationNodeBlendSpace2D] (permite la mezcla lineal entre [b]tres[/b] " "[AnimationNode]) y [AnimationNodeBlendSpace1D] (permite la mezcla lineal " "únicamente entre [b]dos[/b] [AnimationNode])." msgid "A node used for advanced animation transitions in an [AnimationPlayer]." msgstr "" "Un nodo para usarse en transiciones de animación avanzadas en un " "[AnimationPlayer]." msgid "" "A node used for advanced animation transitions in an [AnimationPlayer].\n" "[b]Note:[/b] When linked with an [AnimationPlayer], several properties and " "methods of the corresponding [AnimationPlayer] will not function as expected. " "Playback and transitions should be handled using only the [AnimationTree] and " "its constituent [AnimationNode](s). The [AnimationPlayer] node should be used " "solely for adding, deleting, and editing animations." msgstr "" "Un nodo utilizado para transiciones de animación avanzadas en un " "[AnimationPlayer].\n" "[b]Nota:[/b] Cuando se enlaza con un [AnimationPlayer], varias propiedades y " "métodos del [AnimationPlayer] correspondiente no funcionarán como se espera. " "La reproducción y las transiciones deben manejarse usando únicamente el " "[AnimationTree] y sus [AnimationNode](s) constituyentes. El nodo " "[AnimationPlayer] debe usarse exclusivamente para añadir, eliminar y editar " "animaciones." msgid "" "The path to the [Node] used to evaluate the [AnimationNode] [Expression] if " "one is not explicitly specified internally." msgstr "" "El path al [Node] usado para evaluar el [AnimationNode] [Expression] si no se " "especifica una explícitamente de manera interna." msgid "The path to the [AnimationPlayer] used for animating." msgstr "La ruta al [AnimationPlayer] utilizada para la animación." msgid "" "The root animation node of this [AnimationTree]. See [AnimationRootNode]." msgstr "" "El nodo de animación raíz de este [AnimationTree]. Véase [AnimationRootNode]." msgid "Emitted when the [member anim_player] is changed." msgstr "Emitida cuando [member anim_player] cambia." msgid "" "A region of 2D space that detects other [CollisionObject2D]s entering or " "exiting it." msgstr "" "Una región de espacio 2D que detecta otros [CollisionObject2D]s entrando o " "saliendo de él." msgid "" "[Area2D] is a region of 2D space defined by one or multiple " "[CollisionShape2D] or [CollisionPolygon2D] child nodes. It detects when other " "[CollisionObject2D]s enter or exit it, and it also keeps track of which " "collision objects haven't exited it yet (i.e. which one are overlapping it).\n" "This node can also locally alter or override physics parameters (gravity, " "damping) and route audio to custom audio buses.\n" "[b]Note:[/b] Areas and bodies created with [PhysicsServer2D] might not " "interact as expected with [Area2D]s, and might not emit signals or track " "objects correctly." msgstr "" "[Area2D] es una región del espacio 2D definida por uno o varios nodos hijo " "[CollisionShape2D] o [CollisionPolygon2D]. Detecta cuándo otros " "[CollisionObject2D] entran o salen de ella, y también realiza un seguimiento " "de qué objetos de colisión aún no han salido (es decir, cuáles la están " "superponiendo).\n" "Este nodo también puede alterar o sobrescribir parámetros físicos (gravedad, " "amortiguación) y enrutar el audio a buses de audio personalizados.\n" "[b]Nota:[/b] Las áreas y los cuerpos creados con [PhysicsServer2D] pueden no " "interactuar como se espera con los [Area2D], y podrían fallar al emitir " "señales o realizar el seguimiento de objetos." msgid "Using Area2D" msgstr "Usando Area2D" msgid "2D Pong Demo" msgstr "Demo de Pong en 2D" msgid "2D Platformer Demo" msgstr "Demo de Plataformas en 2D" msgid "" "Returns a list of intersecting [Area2D]s. The overlapping area's [member " "CollisionObject2D.collision_layer] must be part of this area's [member " "CollisionObject2D.collision_mask] in order to be detected.\n" "For performance reasons (collisions are all processed at the same time) this " "list is modified once during the physics step, not immediately after objects " "are moved. Consider using signals instead." msgstr "" "Devuelve una lista de [Area2D] que se intersecan. El [member " "CollisionObject2D.collision_layer] del área superpuesta debe formar parte del " "[member CollisionObject2D.collision_mask] de esta área para que se detecte.\n" "Por razones de rendimiento (todas las colisiones se procesan al mismo " "tiempo), esta lista se modifica una vez durante el paso de física, no " "inmediatamente después de que se muevan los objetos. Considera usar señales " "en su lugar." msgid "" "Returns a list of intersecting [PhysicsBody2D]s and [TileMap]s. The " "overlapping body's [member CollisionObject2D.collision_layer] must be part of " "this area's [member CollisionObject2D.collision_mask] in order to be " "detected.\n" "For performance reasons (collisions are all processed at the same time) this " "list is modified once during the physics step, not immediately after objects " "are moved. Consider using signals instead." msgstr "" "Devuelve una lista de [PhysicsBody2D] y [TileMap] que se intersecan. La capa " "de colisión del cuerpo superpuesto ([member " "CollisionObject2D.collision_layer]) debe formar parte de la máscara de " "colisión de esta área ([member CollisionObject2D.collision_mask]) para poder " "ser detectado.\n" "Por razones de rendimiento (todas las colisiones se procesan al mismo " "tiempo), esta lista se modifica una vez durante el paso de física, no " "inmediatamente después de mover los objetos. Considera utilizar señales en su " "lugar." msgid "" "Returns [code]true[/code] if intersecting any [Area2D]s, otherwise returns " "[code]false[/code]. The overlapping area's [member " "CollisionObject2D.collision_layer] must be part of this area's [member " "CollisionObject2D.collision_mask] in order to be detected.\n" "For performance reasons (collisions are all processed at the same time) the " "list of overlapping areas is modified once during the physics step, not " "immediately after objects are moved. Consider using signals instead." msgstr "" "Devuelve [code]true[/code] si interseca alguna [Area2D], de lo contrario " "devuelve [code]false[/code]. El [member CollisionObject2D.collision_layer] " "del área superpuesta debe ser parte del [member " "CollisionObject2D.collision_mask] de esta área para que se detecte.\n" "Por razones de rendimiento (todas las colisiones se procesan al mismo " "tiempo), la lista de áreas superpuestas se modifica una vez durante el paso " "de física, no inmediatamente después de que se mueven los objetos. Considera " "usar señales en su lugar." msgid "" "Returns [code]true[/code] if intersecting any [PhysicsBody2D]s or [TileMap]s, " "otherwise returns [code]false[/code]. The overlapping body's [member " "CollisionObject2D.collision_layer] must be part of this area's [member " "CollisionObject2D.collision_mask] in order to be detected.\n" "For performance reasons (collisions are all processed at the same time) the " "list of overlapping bodies is modified once during the physics step, not " "immediately after objects are moved. Consider using signals instead." msgstr "" "Devuelve [code]true[/code] si interseca cualquier [PhysicsBody2D] o " "[TileMap], de lo contrario devuelve [code]false[/code]. El [member " "CollisionObject2D.collision_layer] del cuerpo superpuesto debe ser parte del " "[member CollisionObject2D.collision_mask] de esta área para que se detecte.\n" "Por razones de rendimiento (todas las colisiones se procesan al mismo " "tiempo), la lista de cuerpos superpuestos se modifica una vez durante el paso " "de física, no inmediatamente después de que se mueven los objetos. Considera " "usar señales en su lugar." msgid "" "Returns [code]true[/code] if the given [Area2D] intersects or overlaps this " "[Area2D], [code]false[/code] otherwise.\n" "[b]Note:[/b] The result of this test is not immediate after moving objects. " "For performance, the list of overlaps is updated once per frame and before " "the physics step. Consider using signals instead." msgstr "" "Devuelve [code]true[/code] si el [Area2D] dado interseca o se superpone a " "este [Area2D], [code]false[/code] en caso contrario.\n" "[b]Nota:[/b] El resultado de esta prueba no es inmediato después de mover " "objetos. Para mejorar el rendimiento, la lista de superposiciones se " "actualiza una vez por fotograma y antes del paso de física. Considera usar " "señales en su lugar." msgid "" "Returns [code]true[/code] if the given physics body intersects or overlaps " "this [Area2D], [code]false[/code] otherwise.\n" "[b]Note:[/b] The result of this test is not immediate after moving objects. " "For performance, list of overlaps is updated once per frame and before the " "physics step. Consider using signals instead.\n" "The [param body] argument can either be a [PhysicsBody2D] or a [TileMap] " "instance. While TileMaps are not physics bodies themselves, they register " "their tiles with collision shapes as a virtual physics body." msgstr "" "Devuelve [code]true[/code] si el cuerpo físico dado intersecciona o se " "superpone con esta [Area2D], [code]false[/code] en caso contrario.\n" "[b]Nota:[/b] El resultado de esta test no es inmediato después de mover " "objetos. Por rendimiento, la lista de superposiciones se actualiza una vez " "por fotograma y antes del paso de física. Considera usar señales en su " "lugar.\n" "El argumento [param body] puede ser una instancia de [PhysicsBody2D] o de " "[TileMap]. Aunque los TileMaps no son cuerpos físicos en sí mismos, registran " "sus piezas con formas de colisión como un cuerpo físico virtual." msgid "" "The rate at which objects stop spinning in this area. Represents the angular " "velocity lost per second.\n" "See [member ProjectSettings.physics/2d/default_angular_damp] for more details " "about damping." msgstr "" "La velocidad a la que los objetos dejan de girar en esta área. Representa la " "velocidad angular perdida por segundo.\n" "Véase [member ProjectSettings.physics/2d/default_angular_damp] para obtener " "más detalles sobre la amortiguación." msgid "Override mode for angular damping calculations within this area." msgstr "" "Modo de sobre-escritura para los cálculos de amortiguación angular dentro de " "esta área." msgid "The name of the area's audio bus." msgstr "El nombre del bus de audio del área." msgid "" "If [code]true[/code], the area's audio bus overrides the default audio bus." msgstr "" "Si es [code]true[/code], el área del bus de audio sobrescribe el bus de audio " "por defecto." msgid "" "The area's gravity intensity (in pixels per second squared). This value " "multiplies the gravity direction. This is useful to alter the force of " "gravity without altering its direction." msgstr "" "Intensidad gravitatoria del area (en píxeles por segundo al cuadrado). Este " "valor multiplica la dirección gravitatoria . Esto resulta útil para modificar " "la fuerza de la gravedad sin alterar su dirección." msgid "The area's gravity vector (not normalized)." msgstr "El vector de gravedad del área (no normalizado)." msgid "" "If [code]true[/code], gravity is calculated from a point (set via [member " "gravity_point_center]). See also [member gravity_space_override]." msgstr "" "Si es [code]true[/code], la gravedad se calcula a partir de un punto " "(establecido mediante [member gravity_point_center]). Véase también [member " "gravity_space_override]." msgid "" "If gravity is a point (see [member gravity_point]), this will be the point of " "attraction." msgstr "" "Si la gravedad es un punto (ver [member gravity_point]), este será el punto " "de atracción." msgid "" "The distance at which the gravity strength is equal to [member gravity]. For " "example, on a planet 100 pixels in radius with a surface gravity of 4.0 px/" "s², set the [member gravity] to 4.0 and the unit distance to 100.0. The " "gravity will have falloff according to the inverse square law, so in the " "example, at 200 pixels from the center the gravity will be 1.0 px/s² (twice " "the distance, 1/4th the gravity), at 50 pixels it will be 16.0 px/s² (half " "the distance, 4x the gravity), and so on.\n" "The above is true only when the unit distance is a positive number. When this " "is set to 0.0, the gravity will be constant regardless of distance." msgstr "" "La distancia a la que la fuerza de gravedad es igual a [member gravity]. Por " "ejemplo, en un planeta de 100 píxeles de radio con una gravedad superficial " "de 4.0 px/s², establezca la [member gravity] a 4.0 y la unidad de distancia a " "100.0. La gravedad disminuirá según la ley del cuadrado inverso, entonces en " "este ejemplo, a 200 pixeles del centro la gravedad será 1.0 px/s² (doble de " "distancia, 1/4 más gravedad), a 50 píxeles será 16.0 px/s² (mitad de " "distancia, 4 veces más gravedad), y así sucesivamente.\n" "Lo anterior es cierto solo cuando la unidad de distancia es un número " "positivo. Cuando está establecido a 0.0, la gravedad será constante " "independientemente de la distancia." msgid "Override mode for gravity calculations within this area." msgstr "" "Modo de sobrescritura para los cálculos de gravedad dentro de esta área." msgid "" "The rate at which objects stop moving in this area. Represents the linear " "velocity lost per second.\n" "See [member ProjectSettings.physics/2d/default_linear_damp] for more details " "about damping." msgstr "" "La tasa a la que los objetos dejan de moverse en esta área. Representa la " "velocidad lineal perdida por segundo.\n" "Véase [member ProjectSettings.physics/2d/default_linear_damp] para obtener " "más detalles sobre la amortiguación." msgid "Override mode for linear damping calculations within this area." msgstr "" "Modo de sobre-escritura para cálculos de amortiguación lineal dentro de esta " "área." msgid "If [code]true[/code], other monitoring areas can detect this area." msgstr "" "Si es [code]true[/code], otras áreas de monitoreo pueden detectar esta área." msgid "" "If [code]true[/code], the area detects bodies or areas entering and exiting " "it." msgstr "" "Si es [code]true[/code], el área detecta cuerpos o áreas que entran y salen " "de ella." msgid "" "The area's priority. Higher priority areas are processed first. The " "[World2D]'s physics is always processed last, after all areas." msgstr "" "La prioridad del área. Las áreas de mayor prioridad se procesan primero. La " "física de [World2D] siempre se procesa al final, después de todas las áreas." msgid "" "Emitted when the received [param area] enters this area. Requires [member " "monitoring] to be set to [code]true[/code]." msgstr "" "Emitida cuando el [param area] recibido entra en esta área. Requiere que " "[member monitoring] se configure como [code]true[/code]." msgid "" "Emitted when the received [param area] exits this area. Requires [member " "monitoring] to be set to [code]true[/code]." msgstr "" "Emitida cuando el [param area] recibido sale de esta área. Requiere que " "[member monitoring] se configure como [code]true[/code]." msgid "" "Emitted when a [Shape2D] of the received [param area] enters a shape of this " "area. Requires [member monitoring] to be set to [code]true[/code].\n" "[param local_shape_index] and [param area_shape_index] contain indices of the " "interacting shapes from this area and the other area, respectively. [param " "area_rid] contains the [RID] of the other area. These values can be used with " "the [PhysicsServer2D].\n" "[b]Example:[/b] Get the [CollisionShape2D] node from the shape index:\n" "[codeblocks]\n" "[gdscript]\n" "var other_shape_owner = area.shape_find_owner(area_shape_index)\n" "var other_shape_node = area.shape_owner_get_owner(other_shape_owner)\n" "\n" "var local_shape_owner = shape_find_owner(local_shape_index)\n" "var local_shape_node = shape_owner_get_owner(local_shape_owner)\n" "[/gdscript]\n" "[/codeblocks]" msgstr "" "Emitida cuando una forma ([Shape2D]) del área externa ([param area]) entra en " "una forma de esta área. Requiere que [member monitoring] esté establecido en " "[code]true[/code].\n" "Los parámetros [param local_shape_index] y [param area_shape_index] contienen " "los índices de las formas que interactúan de ésta área y del área externa, " "respectivamente. [param area_rid] contiene el [RID] del área externa. Estos " "valores pueden utilizarse con [PhysicsServer2D].\n" "[b]Ejemplo:[/b] Obtener el nodo [CollisionShape2D] a partir del índice de la " "forma:\n" "[codeblocks]\n" "[gdscript]\n" "var other_shape_owner = area.shape_find_owner(area_shape_index)\n" "var other_shape_node = area.shape_owner_get_owner(other_shape_owner)\n" "\n" "var local_shape_owner = shape_find_owner(local_shape_index)\n" "var local_shape_node = shape_owner_get_owner(local_shape_owner)\n" "[/gdscript]\n" "[/codeblocks]" msgid "" "Emitted when a [Shape2D] of the received [param area] exits a shape of this " "area. Requires [member monitoring] to be set to [code]true[/code].\n" "See also [signal area_shape_entered]." msgstr "" "Se emite cuando una [Shape2D] de la [param area] recibido sale de una forma " "de esta área. Requiere que [member monitoring] esté configurado como " "[code]true[/code].\n" "Véase también [signal area_shape_entered]." msgid "" "Emitted when the received [param body] enters this area. [param body] can be " "a [PhysicsBody2D] or a [TileMap]. [TileMap]s are detected if their [TileSet] " "has collision shapes configured. Requires [member monitoring] to be set to " "[code]true[/code]." msgstr "" "Emitido cuando el [param body] recibido entra a este área. [param body] puede " "ser un [PhysicsBody2D] o un [TileMap]. Los [TileMap]s son detectados si su " "[TileSet] tiene formas de colisión configuradas. Requiere que [member " "monitoring] se establezca a [code]true[/code]." msgid "" "Emitted when the received [param body] exits this area. [param body] can be a " "[PhysicsBody2D] or a [TileMap]. [TileMap]s are detected if their [TileSet] " "has collision shapes configured. Requires [member monitoring] to be set to " "[code]true[/code]." msgstr "" "Emitido cuando el [param body] recibido sale de este área. [param body] puede " "ser un [PhysicsBody2D] o un [TileMap]. Los [TileMap]s son detectados si su " "[TileSet] tiene formas de colisión configuradas. Requiere que [member " "monitoring] se establezca a [code]true[/code]." msgid "" "Emitted when a [Shape2D] of the received [param body] enters a shape of this " "area. [param body] can be a [PhysicsBody2D] or a [TileMap]. [TileMap]s are " "detected if their [TileSet] has collision shapes configured. Requires [member " "monitoring] to be set to [code]true[/code].\n" "[param local_shape_index] and [param body_shape_index] contain indices of the " "interacting shapes from this area and the interacting body, respectively. " "[param body_rid] contains the [RID] of the body. These values can be used " "with the [PhysicsServer2D].\n" "[b]Example:[/b] Get the [CollisionShape2D] node from the shape index:\n" "[codeblocks]\n" "[gdscript]\n" "var body_shape_owner = body.shape_find_owner(body_shape_index)\n" "var body_shape_node = body.shape_owner_get_owner(body_shape_owner)\n" "\n" "var local_shape_owner = shape_find_owner(local_shape_index)\n" "var local_shape_node = shape_owner_get_owner(local_shape_owner)\n" "[/gdscript]\n" "[/codeblocks]" msgstr "" "Emitida cuando una forma [Shape2D] del cuerpo externo [param body] entra en " "una forma de ésta área. [param body] puede ser un [PhysicsBody2D] o un " "[TileMap]. Los [TileMap] se detectan si su [TileSet] tiene formas de colisión " "configuradas. Requiere que [member monitoring] esté establecido en " "[code]true[/code].\n" "Los parámetros [param local_shape_index] y [param body_shape_index] contienen " "los índices de las formas que interactúan de ésta área y del cuerpo externo, " "respectivamente. [param body_rid] contiene el [RID] del cuerpo externo. Estos " "valores pueden utilizarse con [PhysicsServer2D].\n" "[b]Ejemplo:[/b] Obtener el nodo [CollisionShape2D] a partir del índice de la " "forma:\n" "[codeblocks]\n" "[gdscript]\n" "var body_shape_owner = body.shape_find_owner(body_shape_index)\n" "var body_shape_node = body.shape_owner_get_owner(body_shape_owner)\n" "\n" "var local_shape_owner = shape_find_owner(local_shape_index)\n" "var local_shape_node = shape_owner_get_owner(local_shape_owner)\n" "[/gdscript]\n" "[/codeblocks]" msgid "" "Emitted when a [Shape2D] of the received [param body] exits a shape of this " "area. [param body] can be a [PhysicsBody2D] or a [TileMap]. [TileMap]s are " "detected if their [TileSet] has collision shapes configured. Requires [member " "monitoring] to be set to [code]true[/code].\n" "See also [signal body_shape_entered]." msgstr "" "Emitido cuando un [Shape2D] del [param body] recibido sale de una forma de " "este área. [param body] puede ser un [PhysicsBody2D] o un [TileMap]. Los " "[TileMap]s son detectados si su [TileSet] tiene formas de colisión " "configuradas. Requiere que [member monitoring] se establezca a [code]true[/" "code].\n" "Véase también [signal body_shape_entered]." msgid "This area does not affect gravity/damping." msgstr "Esta área no afecta a la gravedad/amortiguación." msgid "" "This area adds its gravity/damping values to whatever has been calculated so " "far (in [member priority] order)." msgstr "" "Esta área añade sus valores de gravedad/amortiguación a lo que se ha " "calculado hasta ahora (en el orden [member priority])." msgid "" "This area adds its gravity/damping values to whatever has been calculated so " "far (in [member priority] order), ignoring any lower priority areas." msgstr "" "Esta área añade sus valores de gravedad/amortiguación a lo que se ha " "calculado hasta ahora (en el orden [member priority]), ignorando cualquier " "área de menor prioridad." msgid "" "This area replaces any gravity/damping, even the defaults, ignoring any lower " "priority areas." msgstr "" "Esta área reemplaza cualquier gravedad/amortiguación, incluso las " "predeterminadas, ignorando cualquier área de menor prioridad." msgid "" "This area replaces any gravity/damping calculated so far (in [member " "priority] order), but keeps calculating the rest of the areas." msgstr "" "Esta área reemplaza cualquier gravedad/amortiguación calculada hasta ahora " "(en orden de [member priority]), pero sigue calculando el resto de las áreas." msgid "" "A region of 3D space that detects other [CollisionObject3D]s entering or " "exiting it." msgstr "" "Una región del espacio 3D que detecta otros [CollisionObject3D] entrando o " "saliendo de él." msgid "" "[Area3D] is a region of 3D space defined by one or multiple " "[CollisionShape3D] or [CollisionPolygon3D] child nodes. It detects when other " "[CollisionObject3D]s enter or exit it, and it also keeps track of which " "collision objects haven't exited it yet (i.e. which one are overlapping it).\n" "This node can also locally alter or override physics parameters (gravity, " "damping) and route audio to custom audio buses.\n" "[b]Note:[/b] Areas and bodies created with [PhysicsServer3D] might not " "interact as expected with [Area3D]s, and might not emit signals or track " "objects correctly.\n" "[b]Warning:[/b] Using a [ConcavePolygonShape3D] inside a [CollisionShape3D] " "child of this node (created e.g. by using the [b]Create Trimesh Collision " "Sibling[/b] option in the [b]Mesh[/b] menu that appears when selecting a " "[MeshInstance3D] node) may give unexpected results, since this collision " "shape is hollow. If this is not desired, it has to be split into multiple " "[ConvexPolygonShape3D]s or primitive shapes like [BoxShape3D], or in some " "cases it may be replaceable by a [CollisionPolygon3D]." msgstr "" "[Area3D] es una región del espacio 3D definida por uno o varios nodos hijo " "[CollisionShape3D] o [CollisionPolygon3D]. Detecta cuándo otros " "[CollisionObject3D] entran o salen de ella, y también realiza un seguimiento " "de qué objetos de colisión aún no han salido (es decir, cuáles la están " "superponiendo).\n" "Este nodo también puede alterar o sobrescribir parámetros físicos (gravedad, " "amortiguación) y enrutar el audio a buses de audio personalizados.\n" "[b]Nota:[/b] Las áreas y los cuerpos creados con [PhysicsServer3D] podrían no " "interactuar como se espera con los [Area3D], y podrían no emitir señales ni " "realizar el seguimiento de objetos correctamente.\n" "[b]Advertencia:[/b] Usar un [ConcavePolygonShape3D] dentro de un hijo " "[CollisionShape3D] de este nodo (por ejemplo, creado usando la opción " "[b]Crear Malla de Contorno...[/b] en el menú [b]Malla[/b] que aparece al " "seleccionar un nodo [MeshInstance3D]) puede dar resultados inesperados, ya " "que esta forma de colisión es hueca. Si esto no es lo deseado, debe dividirse " "en múltiples [ConvexPolygonShape3D] o en formas primitivas como [BoxShape3D], " "o en algunos casos puede reemplazarse por un [CollisionPolygon3D]." msgid "GUI in 3D Viewport Demo" msgstr "Demostración GUI en el Viewport 3D" msgid "" "Returns a list of intersecting [Area3D]s. The overlapping area's [member " "CollisionObject3D.collision_layer] must be part of this area's [member " "CollisionObject3D.collision_mask] in order to be detected.\n" "For performance reasons (collisions are all processed at the same time) this " "list is modified once during the physics step, not immediately after objects " "are moved. Consider using signals instead." msgstr "" "Devuelve una lista de [Area3D] que se intersecan. El [member " "CollisionObject3D.collision_layer] del área superpuesta debe formar parte del " "[member CollisionObject3D.collision_mask] de esta área para que se detecte.\n" "Por razones de rendimiento (todas las colisiones se procesan al mismo " "tiempo), esta lista se modifica una vez durante el paso de física, no " "inmediatamente después de que se muevan los objetos. Considera usar señales " "en su lugar." msgid "" "Returns [code]true[/code] if intersecting any [Area3D]s, otherwise returns " "[code]false[/code]. The overlapping area's [member " "CollisionObject3D.collision_layer] must be part of this area's [member " "CollisionObject3D.collision_mask] in order to be detected.\n" "For performance reasons (collisions are all processed at the same time) the " "list of overlapping areas is modified once during the physics step, not " "immediately after objects are moved. Consider using signals instead." msgstr "" "Devuelve [code]true[/code] si interseca alguna [Area3D], de lo contrario " "devuelve [code]false[/code]. El [member CollisionObject3D.collision_layer] " "del área superpuesta debe ser parte del [member " "CollisionObject3D.collision_mask] de esta área para que se detecte.\n" "Por razones de rendimiento (todas las colisiones se procesan al mismo " "tiempo), la lista de áreas superpuestas se modifica una vez durante el paso " "de física, no inmediatamente después de que se mueven los objetos. Considera " "usar señales en su lugar." msgid "" "Returns [code]true[/code] if the given [Area3D] intersects or overlaps this " "[Area3D], [code]false[/code] otherwise.\n" "[b]Note:[/b] The result of this test is not immediate after moving objects. " "For performance, list of overlaps is updated once per frame and before the " "physics step. Consider using signals instead." msgstr "" "Devuelve [code]true[/code] si el [Area3D] dado interseca o se superpone con " "este [Area3D], [code]false[/code] en caso contrario.\n" "[b]Nota:[/b] El resultado de esta prueba no es inmediato después de mover " "objetos. Por rendimiento, la lista de superposiciones se actualiza una vez " "por fotograma y antes del paso de física. Considera usar señales en su lugar." msgid "" "The rate at which objects stop spinning in this area. Represents the angular " "velocity lost per second.\n" "See [member ProjectSettings.physics/3d/default_angular_damp] for more details " "about damping." msgstr "" "La velocidad a la que los objetos dejan de girar en esta área. Representa la " "velocidad angular perdida por segundo.\n" "Véase [member ProjectSettings.physics/3d/default_angular_damp] para obtener " "más detalles sobre la amortiguación." msgid "" "The area's gravity intensity (in meters per second squared). This value " "multiplies the gravity direction. This is useful to alter the force of " "gravity without altering its direction." msgstr "" "La intensidad de la gravedad en la zona (en metros por segundo al cuadrado). " "Este valor multiplica la dirección de la gravedad. Esto es útil para " "modificar la fuerza de la gravedad sin alterar su dirección." msgid "" "The distance at which the gravity strength is equal to [member gravity]. For " "example, on a planet 100 meters in radius with a surface gravity of 4.0 m/s², " "set the [member gravity] to 4.0 and the unit distance to 100.0. The gravity " "will have falloff according to the inverse square law, so in the example, at " "200 meters from the center the gravity will be 1.0 m/s² (twice the distance, " "1/4th the gravity), at 50 meters it will be 16.0 m/s² (half the distance, 4x " "the gravity), and so on.\n" "The above is true only when the unit distance is a positive number. When this " "is set to 0.0, the gravity will be constant regardless of distance." msgstr "" "La distancia a la que la fuerza de gravedad es igual a [member gravity]. Por " "ejemplo, en un planeta de 100 metros de radio con una gravedad superficial de " "4.0 m/s², establezca la [member gravity] a 4.0 y la unidad de distancia a " "100.0. La gravedad disminuirá según la ley del cuadrado inverso, entonces en " "este ejemplo, a 200 metros del centro la gravedad será 1.0 m/s² (doble de " "distancia, 1/4 más gravedad), a 50 metros será 16.0 m/s² (mitad de distancia, " "4 veces más gravedad), y así sucesivamente.\n" "Lo anterior es cierto solo cuando la unidad de distancia es un número " "positivo. Cuando está establecido a 0.0, la gravedad será constante " "independientemente de la distancia." msgid "" "The rate at which objects stop moving in this area. Represents the linear " "velocity lost per second.\n" "See [member ProjectSettings.physics/3d/default_linear_damp] for more details " "about damping." msgstr "" "La tasa a la que los objetos dejan de moverse en esta área. Representa la " "velocidad lineal perdida por segundo.\n" "Véase [member ProjectSettings.physics/3d/default_linear_damp] para obtener " "más detalles sobre la amortiguación." msgid "" "The area's priority. Higher priority areas are processed first. The " "[World3D]'s physics is always processed last, after all areas." msgstr "" "La prioridad del área. Las áreas de mayor prioridad se procesan primero. La " "física de [World3D] siempre se procesa al final, después de todas las áreas." msgid "" "The degree to which this area applies reverb to its associated audio. Ranges " "from [code]0[/code] to [code]1[/code] with [code]0.1[/code] precision." msgstr "" "El grado en que esta área aplica reverberación a su audio asociado. Va de " "[code]0[/code] a [code]1[/code] con una precisión de [code]0.1[/code]." msgid "If [code]true[/code], the area applies reverb to its associated audio." msgstr "" "Si es [code]true[/code], el área aplica reverberación a su audio asociado." msgid "The name of the reverb bus to use for this area's associated audio." msgstr "" "El nombre del bus de reverberación que se utilizará para el audio asociado a " "esta área." msgid "" "The degree to which this area's reverb is a uniform effect. Ranges from " "[code]0[/code] to [code]1[/code] with [code]0.1[/code] precision." msgstr "" "El grado de reverberación de esta área es un efecto uniforme. Va de [code]0[/" "code] a [code]1[/code] con una precisión de [code]0,1[/code]." msgid "" "The exponential rate at which wind force decreases with distance from its " "origin.\n" "[b]Note:[/b] This wind force only applies to [SoftBody3D] nodes. Other " "physics bodies are currently not affected by wind." msgstr "" "La tasa exponencial a la que la fuerza del viento disminuye con la distancia " "desde su origen.\n" "[b]Nota:[/b] Esta fuerza del viento solo se aplica a los nodos [SoftBody3D]. " "Otros cuerpos físicos no se ven afectados actualmente por el viento." msgid "" "The magnitude of area-specific wind force.\n" "[b]Note:[/b] This wind force only applies to [SoftBody3D] nodes. Other " "physics bodies are currently not affected by wind." msgstr "" "La magnitud de la fuerza del viento específica del área.\n" "[b]Nota:[/b] Esta fuerza del viento solo se aplica a los nodos [SoftBody3D]. " "Otros cuerpos físicos no se ven afectados actualmente por el viento." msgid "" "The [Node3D] which is used to specify the direction and origin of an area-" "specific wind force. The direction is opposite to the z-axis of the " "[Node3D]'s local transform, and its origin is the origin of the [Node3D]'s " "local transform.\n" "[b]Note:[/b] This wind force only applies to [SoftBody3D] nodes. Other " "physics bodies are currently not affected by wind." msgstr "" "El [Node3D] que se utiliza para especificar la dirección y el origen de una " "fuerza del viento específica del área. La dirección es opuesta al eje z de la " "transformación local del [Node3D], y su origen es el origen de la " "transformación local del [Node3D].\n" "[b]Nota:[/b] Esta fuerza del viento solo se aplica a los nodos [SoftBody3D]. " "Otros cuerpos físicos no se ven afectados actualmente por el viento." msgid "" "Emitted when a [Shape3D] of the received [param area] enters a shape of this " "area. Requires [member monitoring] to be set to [code]true[/code].\n" "[param local_shape_index] and [param area_shape_index] contain indices of the " "interacting shapes from this area and the other area, respectively. [param " "area_rid] contains the [RID] of the other area. These values can be used with " "the [PhysicsServer3D].\n" "[b]Example:[/b] Get the [CollisionShape3D] node from the shape index:\n" "[codeblocks]\n" "[gdscript]\n" "var other_shape_owner = area.shape_find_owner(area_shape_index)\n" "var other_shape_node = area.shape_owner_get_owner(other_shape_owner)\n" "\n" "var local_shape_owner = shape_find_owner(local_shape_index)\n" "var local_shape_node = shape_owner_get_owner(local_shape_owner)\n" "[/gdscript]\n" "[/codeblocks]" msgstr "" "Emitida cuando una forma ([Shape2D]) del área externa ([param area]) entra en " "una forma de ésta área. Requiere que [member monitoring] esté establecido en " "[code]true[/code].\n" "Los parámetros [param local_shape_index] y [param area_shape_index] contienen " "los índices de las formas que interactúan de ésta área y del área externa, " "respectivamente. El parámetro [param area_rid] contiene el [RID] del área " "externa. Estos valores pueden utilizarse con [PhysicsServer2D].\n" "[b]Ejemplo:[/b] Obtener el nodo [CollisionShape2D] a partir del índice de la " "forma:\n" "[codeblocks]\n" "[gdscript]\n" "var other_shape_owner = area.shape_find_owner(area_shape_index)\n" "var other_shape_node = area.shape_owner_get_owner(other_shape_owner)\n" "\n" "var local_shape_owner = shape_find_owner(local_shape_index)\n" "var local_shape_node = shape_owner_get_owner(local_shape_owner)\n" "[/gdscript]\n" "[/codeblocks]" msgid "" "Emitted when a [Shape3D] of the received [param area] exits a shape of this " "area. Requires [member monitoring] to be set to [code]true[/code].\n" "See also [signal area_shape_entered]." msgstr "" "Emitida cuando una [Shape3D] de la [param area] recibido sale de una forma de " "esta área. Requiere que [member monitoring] esté establecido en [code]true[/" "code].\n" "Véase también [signal area_shape_entered]." msgid "3D lights and shadows" msgstr "Luces y sombras 3D" msgid "A built-in data structure that holds a sequence of elements." msgstr "" "Una estructura de datos incorporada que contiene una secuencia de elementos." msgid "Constructs an empty [Array]." msgstr "Construye un [Array] vacío." msgid "" "Creates a typed array from the [param base] array. A typed array can only " "contain elements of the given type, or that inherit from the given class, as " "described by this constructor's parameters:\n" "- [param type] is the built-in [Variant] type, as one the [enum Variant.Type] " "constants.\n" "- [param class_name] is the built-in class name (see [method " "Object.get_class]).\n" "- [param script] is the associated script. It must be a [Script] instance or " "[code]null[/code].\n" "If [param type] is not [constant TYPE_OBJECT], [param class_name] must be an " "empty [StringName] and [param script] must be [code]null[/code].\n" "[codeblock]\n" "class_name Sword\n" "extends Node\n" "\n" "class Stats:\n" "\tpass\n" "\n" "func _ready():\n" "\tvar a = Array([], TYPE_INT, \"\", null) # Array[int]\n" "\tvar b = Array([], TYPE_OBJECT, \"Node\", null) # Array[Node]\n" "\tvar c = Array([], TYPE_OBJECT, \"Node\", Sword) # Array[Sword]\n" "\tvar d = Array([], TYPE_OBJECT, \"RefCounted\", Stats) # Array[Stats]\n" "[/codeblock]\n" "The [param base] array's elements are converted when necessary. If this is " "not possible or [param base] is already typed, this constructor fails and " "returns an empty [Array].\n" "In GDScript, this constructor is usually not necessary, as it is possible to " "create a typed array through static typing:\n" "[codeblock]\n" "var numbers: Array[float] = []\n" "var children: Array[Node] = [$Node, $Sprite2D, $RigidBody3D]\n" "\n" "var integers: Array[int] = [0.2, 4.5, -2.0]\n" "print(integers) # Prints [0, 4, -2]\n" "[/codeblock]" msgstr "" "Crea un arreglo tipado a partir del arreglo [param base]. Un arreglo tipado " "solo puede contener elementos del tipo indicado, o que hereden de la clase " "especificada, según lo descrito por los parámetros de este constructor:\n" "- [param type] es el tipo incorporado de [Variant], como una de las " "constantes de [enum Variant.Type].\n" "- [param class_name] es el nombre de la clase incorporada (ver [method " "Object.get_class]).\n" "- [param script] es el script asociado. Debe ser una instancia de [Script] o " "[code]null[/code].\n" "Si [param type] no es [constant TYPE_OBJECT], [param class_name] debe ser un " "[StringName] vacío y [param script] debe ser [code]null[/code].\n" "[codeblock]\n" "class_name Sword\n" "extends Node\n" "\n" "class Stats:\n" "\tpass\n" "\n" "func _ready():\n" "\tvar a = Array([], TYPE_INT, \"\", null) # Array[int]\n" "\tvar b = Array([], TYPE_OBJECT, \"Node\", null) # Array[Node]\n" "\tvar c = Array([], TYPE_OBJECT, \"Node\", Sword) # Array[Sword]\n" "\tvar d = Array([], TYPE_OBJECT, \"RefCounted\", Stats) # Array[Stats]\n" "[/codeblock]\n" "Los elementos del arreglo [param base] se convierten cuando es necesario. Si " "esto no es posible o si [param base] ya es tipado, este constructor falla y " "devuelve un [Array] vacío.\n" "En GDScript, este constructor normalmente no es necesario, ya que es posible " "crear un arreglo tipado mediante tipado estático:\n" "[codeblock]\n" "var numbers: Array[float] = []\n" "var children: Array[Node] = [$Node, $Sprite2D, $RigidBody3D]\n" "\n" "var integers: Array[int] = [0.2, 4.5, -2.0]\n" "print(integers) # Imprime [0, 4, -2]\n" "[/codeblock]" msgid "" "Returns the same array as [param from]. If you need a copy of the array, use " "[method duplicate]." msgstr "" "Devuelve la misma matriz que [param from]. Si necesitas una copia de la " "matriz, utiliza [method duplicate]." msgid "Constructs an array from a [PackedByteArray]." msgstr "Construye un array a partir de un [PackedByteArray]." msgid "Constructs an array from a [PackedColorArray]." msgstr "Construye un array a partir de un [PackedColorArray]." msgid "Constructs an array from a [PackedFloat32Array]." msgstr "Construye un array a partir de un [PackedInt64Array]." msgid "Constructs an array from a [PackedFloat64Array]." msgstr "Construye un array a partir de un [PackedInt64Array]." msgid "Constructs an array from a [PackedInt32Array]." msgstr "Construye un array a partir de un [PackedInt64Array]." msgid "Constructs an array from a [PackedInt64Array]." msgstr "Construye un array a partir de un [PackedInt64Array]." msgid "Constructs an array from a [PackedStringArray]." msgstr "Construye un array a partir de un [PackedStringArray]." msgid "Constructs an array from a [PackedVector2Array]." msgstr "Construye un array a partir de un [PackedVector2Array]." msgid "Constructs an array from a [PackedVector3Array]." msgstr "Construye un array a partir de un [PackedVector3Array]." msgid "Constructs an array from a [PackedVector4Array]." msgstr "Construye un array a partir de un [PackedVector2Array]." msgid "" "Calls the given [Callable] on each element in the array and returns " "[code]true[/code] if the [Callable] returns [code]true[/code] for [i]all[/i] " "elements in the array. If the [Callable] returns [code]false[/code] for one " "array element or more, this method returns [code]false[/code].\n" "The [param method] should take one [Variant] parameter (the current array " "element) and return a [bool].\n" "[codeblocks]\n" "[gdscript]\n" "func greater_than_5(number):\n" "\treturn number > 5\n" "\n" "func _ready():\n" "\tprint([6, 10, 6].all(greater_than_5)) # Prints true (3/3 elements evaluate " "to true).\n" "\tprint([4, 10, 4].all(greater_than_5)) # Prints false (1/3 elements evaluate " "to true).\n" "\tprint([4, 4, 4].all(greater_than_5)) # Prints false (0/3 elements evaluate " "to true).\n" "\tprint([].all(greater_than_5)) # Prints true (0/0 elements evaluate " "to true).\n" "\n" "\t# Same as the first line above, but using a lambda function.\n" "\tprint([6, 10, 6].all(func(element): return element > 5)) # Prints true\n" "[/gdscript]\n" "[csharp]\n" "private static bool GreaterThan5(int number)\n" "{\n" "\treturn number > 5;\n" "}\n" "\n" "public override void _Ready()\n" "{\n" "\t// Prints True (3/3 elements evaluate to true).\n" "\tGD.Print(new Godot.Collections.Array { 6, 10, 6 }.All(GreaterThan5));\n" "\t// Prints False (1/3 elements evaluate to true).\n" "\tGD.Print(new Godot.Collections.Array { 4, 10, 4 }.All(GreaterThan5));\n" "\t// Prints False (0/3 elements evaluate to true).\n" "\tGD.Print(new Godot.Collections.Array { 4, 4, 4 }.All(GreaterThan5));\n" "\t// Prints True (0/0 elements evaluate to true).\n" "\tGD.Print(new Godot.Collections.Array { }.All(GreaterThan5));\n" "\n" "\t// Same as the first line above, but using a lambda function.\n" "\tGD.Print(new Godot.Collections.Array { 6, 10, 6 }.All(element => " "element > 5)); // Prints True\n" "}\n" "[/csharp]\n" "[/codeblocks]\n" "See also [method any], [method filter], [method map] and [method reduce].\n" "[b]Note:[/b] Unlike relying on the size of an array returned by [method " "filter], this method will return as early as possible to improve performance " "(especially with large arrays).\n" "[b]Note:[/b] For an empty array, this method [url=https://en.wikipedia.org/" "wiki/Vacuous_truth]always[/url] returns [code]true[/code]." msgstr "" "Llama al [Callable] dado para cada elemento del arreglo y devuelve " "[code]true[/code] si el [Callable] devuelve [code]true[/code] para [i]todos[/" "i] los elementos del arreglo. Si el [Callable] devuelve [code]false[/code] " "para uno o más elementos, este método devuelve [code]false[/code].\n" "El parámetro [param method] debe recibir un parámetro [Variant] (el elemento " "actual del arreglo) y devolver un [bool].\n" "[codeblocks]\n" "[gdscript]\n" "func greater_than_5(number):\n" "\treturn number > 5\n" "\n" "func _ready():\n" "\tprint([6, 10, 6].all(greater_than_5)) # Imprime true (3/3 elementos evalúan " "a true).\n" "\tprint([4, 10, 4].all(greater_than_5)) # Imprime false (1/3 elementos " "evalúan a true).\n" "\tprint([4, 4, 4].all(greater_than_5)) # Imprime false (0/3 elementos " "evalúan a true).\n" "\tprint([].all(greater_than_5)) # Imprime true (0/0 elementos evalúan " "a true).\n" "\n" "\t# Igual que la primera línea de arriba, pero usando una función lambda.\n" "\tprint([6, 10, 6].all(func(element): return element > 5)) # Imprime true\n" "[/gdscript]\n" "[csharp]\n" "private static bool GreaterThan5(int number)\n" "{\n" "\treturn number > 5;\n" "}\n" "\n" "public override void _Ready()\n" "{\n" "\t// Imprime True (3/3 elementos evalúan a true).\n" "\tGD.Print(new Godot.Collections.Array { 6, 10, 6 }.All(GreaterThan5));\n" "\t// Imprime False (1/3 elementos evalúan a true).\n" "\tGD.Print(new Godot.Collections.Array { 4, 10, 4 }.All(GreaterThan5));\n" "\t// Imprime False (0/3 elementos evalúan a true).\n" "\tGD.Print(new Godot.Collections.Array { 4, 4, 4 }.All(GreaterThan5));\n" "\t// Imprime True (0/0 elementos evalúan a true).\n" "\tGD.Print(new Godot.Collections.Array { }.All(GreaterThan5));\n" "\n" "\t// Igual que la primera línea de arriba, pero usando una función lambda.\n" "\tGD.Print(new Godot.Collections.Array { 6, 10, 6 }.All(element => " "element > 5)); // Imprime True\n" "}\n" "[/csharp]\n" "[/codeblocks]\n" "Véase también [method any], [method filter], [method map] y [method reduce].\n" "[b]Nota:[/b] A diferencia de depender del tamaño de un arreglo devuelto por " "[method filter], este método devuelve el resultado lo antes posible para " "mejorar el rendimiento (especialmente con arreglos grandes).\n" "[b]Nota:[/b] Para un arreglo vacío, este método [url=https://es.wikipedia.org/" "wiki/Vacuous_truth]siempre[/url] devuelve [code]true[/code]." msgid "" "Calls the given [Callable] on each element in the array and returns " "[code]true[/code] if the [Callable] returns [code]true[/code] for [i]one or " "more[/i] elements in the array. If the [Callable] returns [code]false[/code] " "for all elements in the array, this method returns [code]false[/code].\n" "The [param method] should take one [Variant] parameter (the current array " "element) and return a [bool].\n" "[codeblock]\n" "func greater_than_5(number):\n" "\treturn number > 5\n" "\n" "func _ready():\n" "\tprint([6, 10, 6].any(greater_than_5)) # Prints true (3 elements evaluate to " "true).\n" "\tprint([4, 10, 4].any(greater_than_5)) # Prints true (1 elements evaluate to " "true).\n" "\tprint([4, 4, 4].any(greater_than_5)) # Prints false (0 elements evaluate " "to true).\n" "\tprint([].any(greater_than_5)) # Prints false (0 elements evaluate " "to true).\n" "\n" "\t# Same as the first line above, but using a lambda function.\n" "\tprint([6, 10, 6].any(func(number): return number > 5)) # Prints true\n" "[/codeblock]\n" "See also [method all], [method filter], [method map] and [method reduce].\n" "[b]Note:[/b] Unlike relying on the size of an array returned by [method " "filter], this method will return as early as possible to improve performance " "(especially with large arrays).\n" "[b]Note:[/b] For an empty array, this method always returns [code]false[/" "code]." msgstr "" "Llama al [Callable] dado para cada elemento del arreglo y devuelve " "[code]true[/code] si el [Callable] devuelve [code]true[/code] para [i]uno o " "más[/i] elementos del arreglo. Si el [Callable] devuelve [code]false[/code] " "para todos los elementos, este método devuelve [code]false[/code].\n" "El parámetro [param method] debe recibir un parámetro [Variant] (el elemento " "actual del arreglo) y devolver un [bool].\n" "[codeblock]\n" "func greater_than_5(number):\n" "\treturn number > 5\n" "\n" "func _ready():\n" "\tprint([6, 10, 6].any(greater_than_5)) # Imprime true (3 elementos evalúan a " "true).\n" "\tprint([4, 10, 4].any(greater_than_5)) # Imprime true (1 elemento evalúa a " "true).\n" "\tprint([4, 4, 4].any(greater_than_5)) # Imprime false (0 elementos evalúan " "a true).\n" "\tprint([].any(greater_than_5)) # Imprime false (0 elementos evalúan " "a true).\n" "\n" "\t# Igual que la primera línea de arriba, pero usando una función lambda.\n" "\tprint([6, 10, 6].any(func(number): return number > 5)) # Imprime true\n" "[/codeblock]\n" "Véase también [method all], [method filter], [method map] y [method reduce].\n" "[b]Nota:[/b] A diferencia de depender del tamaño de un arreglo devuelto por " "[method filter], este método devuelve el resultado lo antes posible para " "mejorar el rendimiento (especialmente con arreglos grandes).\n" "[b]Nota:[/b] Para un arreglo vacío, este método siempre devuelve [code]false[/" "code]." msgid "" "Appends [param value] at the end of the array (alias of [method push_back])." msgstr "" "Concatena [param value] al final del array (alias de [method push_back])." msgid "" "Appends another [param array] at the end of this array.\n" "[codeblock]\n" "var numbers = [1, 2, 3]\n" "var extra = [4, 5, 6]\n" "numbers.append_array(extra)\n" "print(numbers) # Prints [1, 2, 3, 4, 5, 6]\n" "[/codeblock]" msgstr "" "Añade otro [param array] al final de este array.\n" "[codeblock]\n" "var numbers = [1, 2, 3]\n" "var extra = [4, 5, 6]\n" "numbers.append_array(extra)\n" "print(numbers) # Imprime [1, 2, 3, 4, 5, 6].\n" "[/codeblock]" msgid "" "Assigns elements of another [param array] into the array. Resizes the array " "to match [param array]. Performs type conversions if the array is typed." msgstr "" "Asigna los elementos de otro [param array] en el array. Cambia el tamaño del " "array para que coincida con [param array]. Realiza conversiones de tipo si el " "array está tipado." msgid "" "Returns the last element of the array. If the array is empty, fails and " "returns [code]null[/code]. See also [method front].\n" "[b]Note:[/b] Unlike with the [code][][/code] operator ([code]array[-1][/" "code]), an error is generated without stopping project execution." msgstr "" "Devuelve el último elemento del array. Si el array está vacío, falla y " "devuelve [code]null[/code]. Véase también [method front].\n" "[b]Nota:[/b] A diferencia del [code][][/code] operador ([code]array[-1][/" "code]), se genera un error sin detener la ejecución del proyecto." msgid "" "Returns the index of [param value] in the sorted array. If it cannot be " "found, returns where [param value] should be inserted to keep the array " "sorted. The algorithm used is [url=https://en.wikipedia.org/wiki/" "Binary_search_algorithm]binary search[/url].\n" "If [param before] is [code]true[/code] (as by default), the returned index " "comes before all existing elements equal to [param value] in the array.\n" "[codeblock]\n" "var numbers = [2, 4, 8, 10]\n" "var idx = numbers.bsearch(7)\n" "\n" "numbers.insert(idx, 7)\n" "print(numbers) # Prints [2, 4, 7, 8, 10]\n" "\n" "var fruits = [\"Apple\", \"Lemon\", \"Lemon\", \"Orange\"]\n" "print(fruits.bsearch(\"Lemon\", true)) # Prints 1, points at the first " "\"Lemon\".\n" "print(fruits.bsearch(\"Lemon\", false)) # Prints 3, points at \"Orange\".\n" "[/codeblock]\n" "[b]Note:[/b] Calling [method bsearch] on an [i]unsorted[/i] array will result " "in unexpected behavior. Use [method sort] before calling this method." msgstr "" "Devuelve el índice de [param value] en el arreglo ordenado. Si no se " "encuentra, devuelve la posición en la que se debería insertar [param value] " "para mantener el arreglo ordenado. El algoritmo utilizado es la [url=https://" "es.wikipedia.org/wiki/B%C3%Basqueda_binaria]búsqueda binaria[/url].\n" "Si el parámetro [param before] es [code]true[/code] (como por defecto), el " "índice devuelto estará antes de todos los elementos existentes iguales a " "[param value] en el arreglo.\n" "[codeblock]\n" "var numbers = [2, 4, 8, 10]\n" "var idx = numbers.bsearch(7)\n" "\n" "numbers.insert(idx, 7)\n" "print(numbers) # Imprime [2, 4, 7, 8, 10]\n" "\n" "var fruits = [\"Limón\", \"Manzana\", \"Manzana\", \"Naranja\"]\n" "print(fruits.bsearch(\"Manzana\", true)) # Imprime 1, apunta al primer " "\"Manzana\".\n" "print(fruits.bsearch(\"Manzana\", false)) # Imprime 3, apunta a \"Naranja\".\n" "[/codeblock]\n" "[b]Nota:[/b] Llamar a [method bsearch] sobre un arreglo [i]no ordenado[/i] " "dará lugar a un comportamiento inesperado. Utilice [method sort] antes de " "llamar a este método." msgid "" "Returns the index of [param value] in the sorted array. If it cannot be " "found, returns where [param value] should be inserted to keep the array " "sorted (using [param func] for the comparisons). The algorithm used is " "[url=https://en.wikipedia.org/wiki/Binary_search_algorithm]binary search[/" "url].\n" "Similar to [method sort_custom], [param func] is called as many times as " "necessary, receiving one array element and [param value] as arguments. The " "function should return [code]true[/code] if the array element should be " "[i]behind[/i] [param value], otherwise it should return [code]false[/code].\n" "If [param before] is [code]true[/code] (as by default), the returned index " "comes before all existing elements equal to [param value] in the array.\n" "[codeblock]\n" "func sort_by_amount(a, b):\n" "\tif a[1] < b[1]:\n" "\t\treturn true\n" "\treturn false\n" "\n" "func _ready():\n" "\tvar my_items = [[\"Tomato\", 2], [\"Kiwi\", 5], [\"Rice\", 9]]\n" "\n" "\tvar apple = [\"Apple\", 5]\n" "\t# \"Apple\" is inserted before \"Kiwi\".\n" "\tmy_items.insert(my_items.bsearch_custom(apple, sort_by_amount, true), " "apple)\n" "\n" "\tvar banana = [\"Banana\", 5]\n" "\t# \"Banana\" is inserted after \"Kiwi\".\n" "\tmy_items.insert(my_items.bsearch_custom(banana, sort_by_amount, false), " "banana)\n" "\n" "\t# Prints [[\"Tomato\", 2], [\"Apple\", 5], [\"Kiwi\", 5], [\"Banana\", 5], " "[\"Rice\", 9]]\n" "\tprint(my_items)\n" "[/codeblock]\n" "[b]Note:[/b] Calling [method bsearch_custom] on an [i]unsorted[/i] array will " "result in unexpected behavior. Use [method sort_custom] with [param func] " "before calling this method." msgstr "" "Devuelve el índice de [param value] en el arreglo ordenado. Si no se " "encuentra, devuelve la posición en la que se debería insertar [param value] " "para mantener el arreglo ordenado (utilizando [param func] para las " "comparaciones). El algoritmo utilizado es la [url=https://es.wikipedia.org/" "wiki/B%C3%Basqueda_binaria]búsqueda binaria[/url].\n" "De manera similar a [method sort_custom], [param func] se llama tantas veces " "como sea necesario, recibiendo un elemento del arreglo y [param value] como " "argumentos. La función debe devolver [code]true[/code] si el elemento del " "arreglo debe colocarse [i]detrás[/i] de [param value], de lo contrario debe " "devolver [code]false[/code].\n" "Si [param before] es [code]true[/code] (como por defecto), el índice devuelto " "estará antes de todos los elementos existentes iguales a [param value] en el " "arreglo.\n" "[codeblock]\n" "func sort_by_amount(a, b):\n" "\tif a[1] < b[1]:\n" "\t\treturn true\n" "\treturn false\n" "\n" "func _ready():\n" "\tvar my_items = [[\"Tomato\", 2], [\"Kiwi\", 5], [\"Rice\", 9]]\n" "\n" "\tvar apple = [\"Apple\", 5]\n" "\t# \"Apple\" se inserta antes de \"Kiwi\".\n" "\tmy_items.insert(my_items.bsearch_custom(apple, sort_by_amount, true), " "apple)\n" "\n" "\tvar banana = [\"Banana\", 5]\n" "\t# \"Banana\" se inserta después de \"Kiwi\".\n" "\tmy_items.insert(my_items.bsearch_custom(banana, sort_by_amount, false), " "banana)\n" "\n" "\t# Imprime [[\"Tomato\", 2], [\"Apple\", 5], [\"Kiwi\", 5], [\"Banana\", 5], " "[\"Rice\", 9]]\n" "\tprint(my_items)\n" "[/codeblock]\n" "[b]Nota:[/b] Llamar a [method bsearch_custom] sobre un arreglo [i]no " "ordenado[/i] dará lugar a un comportamiento inesperado. Use [method " "sort_custom] con [param func] antes de llamar a este método." msgid "" "Removes all elements from the array. This is equivalent to using [method " "resize] with a size of [code]0[/code]." msgstr "" "Elimina todos los elementos del array. Esto es equivalente a usar [method " "resize] con un tamaño de [code]0[/code]." msgid "" "Returns the number of times an element is in the array.\n" "To count how many elements in an array satisfy a condition, see [method " "reduce]." msgstr "" "Devuelve el número de veces que un elemento está en el array.\n" "Para contar cuántos elementos de un array satisfacen una condición, véase " "[method reduce]." msgid "" "Returns a new copy of the array.\n" "By default, a [b]shallow[/b] copy is returned: all nested [Array], " "[Dictionary], and [Resource] elements are shared with the original array. " "Modifying any of those in one array will also affect them in the other.\n" "If [param deep] is [code]true[/code], a [b]deep[/b] copy is returned: all " "nested arrays and dictionaries are also duplicated (recursively). Any " "[Resource] is still shared with the original array, though." msgstr "" "Devuelve una copia nueva del array.\n" "Por defecto, una copia [b]superficial[/b]: todos los elementos anidados " "[Array], [Dictionary], y [Resource] son compartidos con el array original. " "Modificar cualquiera de estos en un array también los afectará en el otro.\n" "Si [param deep] es [code]true[/code], se devuelve una copia [b]profunda[/b]: " "Todos los arrays y dictionaries son también duplicados (recursivamente). Sin " "embargo, Cualquier [Resource] es todavía compartido con el array original." msgid "" "Duplicates this array, deeply, like [method duplicate] when passing " "[code]true[/code], with extra control over how subresources are handled.\n" "[param deep_subresources_mode] must be one of the values from [enum " "Resource.DeepDuplicateMode]. By default, only internal resources will be " "duplicated (recursively)." msgstr "" "Duplica este array profundamente, como [method duplicate] al pasar " "[code]true[/code], con control adicional sobre cómo se manejan los " "subrecursos.\n" "[param deep_subresources_mode] debe ser uno de los valores de [enum " "Resource.DeepDuplicateMode]. Por defecto, solo se duplicarán los recursos " "internos (recursivamente)." msgid "" "Finds and removes the first occurrence of [param value] from the array. If " "[param value] does not exist in the array, nothing happens. To remove an " "element by index, use [method remove_at] instead.\n" "[b]Note:[/b] This method shifts every element's index after the removed " "[param value] back, which may have a noticeable performance cost, especially " "on larger arrays.\n" "[b]Note:[/b] Erasing elements while iterating over arrays is [b]not[/b] " "supported and will result in unpredictable behavior." msgstr "" "Encuentra y elimina la primera aparición de [param value] del array. Si " "[param value] no existe en el array, no ocurre nada. Para eliminar un " "elemento por índice, usa [method remove_at] en su lugar.\n" "[b]Nota:[/b] Este método desplaza hacia atrás el índice de cada elemento " "después del [param value] eliminado, lo que puede tener un coste de " "rendimiento notable, especialmente en arrays grandes.\n" "[b]Nota:[/b] Eliminar elementos mientras se itera sobre arrays [b]no[/b] está " "soportado y resultará en un comportamiento impredecible." msgid "" "Assigns the given [param value] to all elements in the array.\n" "This method can often be combined with [method resize] to create an array " "with a given size and initialized elements:\n" "[codeblocks]\n" "[gdscript]\n" "var array = []\n" "array.resize(5)\n" "array.fill(2)\n" "print(array) # Prints [2, 2, 2, 2, 2]\n" "[/gdscript]\n" "[csharp]\n" "Godot.Collections.Array array = [];\n" "array.Resize(5);\n" "array.Fill(2);\n" "GD.Print(array); // Prints [2, 2, 2, 2, 2]\n" "[/csharp]\n" "[/codeblocks]\n" "[b]Note:[/b] If [param value] is a [Variant] passed by reference ([Object]-" "derived, [Array], [Dictionary], etc.), the array will be filled with " "references to the same [param value], which are not duplicates." msgstr "" "Asigna el [param value] dado a todos los elementos del arreglo.\n" "Este método se puede combinar a menudo con [method resize] para crear un " "arreglo de un tamaño determinado y con elementos inicializados:\n" "[codeblocks]\n" "[gdscript]\n" "var array = []\n" "array.resize(5)\n" "array.fill(2)\n" "print(array) # Imprime [2, 2, 2, 2, 2]\n" "[/gdscript]\n" "[csharp]\n" "Godot.Collections.Array array = [];\n" "array.Resize(5);\n" "array.Fill(2);\n" "GD.Print(array); // Imprime [2, 2, 2, 2, 2]\n" "[/csharp]\n" "[/codeblocks]\n" "[b]Nota:[/b] Si [param value] es un [Variant] pasado por referencia (derivado " "de [Object], [Array], [Dictionary], etc.), el arreglo se llenará con " "referencias al mismo [param value], las cuales no son duplicados." msgid "" "Calls the given [Callable] on each element in the array and returns a new, " "filtered [Array].\n" "The [param method] receives one of the array elements as an argument, and " "should return [code]true[/code] to add the element to the filtered array, or " "[code]false[/code] to exclude it.\n" "[codeblock]\n" "func is_even(number):\n" "\treturn number % 2 == 0\n" "\n" "func _ready():\n" "\tprint([1, 4, 5, 8].filter(is_even)) # Prints [4, 8]\n" "\n" "\t# Same as above, but using a lambda function.\n" "\tprint([1, 4, 5, 8].filter(func(number): return number % 2 == 0))\n" "[/codeblock]\n" "See also [method any], [method all], [method map] and [method reduce]." msgstr "" "Llama al [Callable] dado para cada elemento del arreglo y devuelve un nuevo " "[Array] filtrado.\n" "El parámetro [param method] recibe como argumento uno de los elementos del " "arreglo y debe devolver [code]true[/code] para agregar el elemento al arreglo " "filtrado, o [code]false[/code] para excluirlo.\n" "[codeblock]\n" "func is_even(number):\n" "\treturn number % 2 == 0\n" "\n" "func _ready():\n" "\tprint([1, 4, 5, 8].filter(is_even)) # Imprime [4, 8]\n" "\n" "\t# Igual que arriba, pero usando una función lambda.\n" "\tprint([1, 4, 5, 8].filter(func(number): return number % 2 == 0))\n" "[/codeblock]\n" "Véase también [method any], [method all], [method map] y [method reduce]." msgid "" "Returns the index of the [b]first[/b] occurrence of [param what] in this " "array, or [code]-1[/code] if there are none. The search's start can be " "specified with [param from], continuing to the end of the array.\n" "[b]Note:[/b] If you just want to know whether the array contains [param " "what], use [method has] ([code]Contains[/code] in C#). In GDScript, you may " "also use the [code]in[/code] operator.\n" "[b]Note:[/b] For performance reasons, the search is affected by [param " "what]'s [enum Variant.Type]. For example, [code]7[/code] ([int]) and " "[code]7.0[/code] ([float]) are not considered equal for this method." msgstr "" "Devuelve el índice de la [b]primera[/b] aparición de [param what] en este " "arreglo, o [code]-1[/code] si no existe ninguna. El inicio de la búsqueda " "puede especificarse con [param from], continuando hasta el final del " "arreglo.\n" "[b]Nota:[/b] Si solo desea comprobar si el arreglo contiene [param what], " "utilice [method has] ([code]Contains[/code] en C#). En GDScript, también " "puede usar el operador [code]in[/code].\n" "[b]Nota:[/b] Por razones de rendimiento, la búsqueda está influenciada por el " "[enum Variant.Type] de [param what]. Por ejemplo, [code]7[/code] ([int]) y " "[code]7.0[/code] ([float]) no se consideran iguales para este método." msgid "" "Returns the first element of the array. If the array is empty, fails and " "returns [code]null[/code]. See also [method back].\n" "[b]Note:[/b] Unlike with the [code][][/code] operator ([code]array[0][/" "code]), an error is generated without stopping project execution." msgstr "" "Devuelve el primer elemento del Arreglo. Imprime un error y retorna " "[code]null[/code] si el array está vacío. Véase también [method back].\n" "[b]Note:[/b] Llamar esta función [code][][/code] no es lo mismo que poner " "[code]array[0][/code]. Si el array está vacío, acceder por el índice detendrá " "el la ejecución del proyecto si se ejecuta desde el Editor." msgid "" "Returns the element at the given [param index] in the array. If [param index] " "is out-of-bounds or negative, this method fails and returns [code]null[/" "code].\n" "This method is similar (but not identical) to the [code][][/code] operator. " "Most notably, when this method fails, it doesn't pause project execution if " "run from the editor." msgstr "" "Devuelve el elemento en el [param index] dado en el array. Si [param index] " "está fuera de los límites o es negativo, este método falla y devuelve " "[code]null[/code].\n" "Este método es similar (pero no idéntico) al operador [code][][/code]. Lo más " "notable es que, cuando este método falla, no pausa la ejecución del proyecto " "si se ejecuta desde el editor." msgid "" "Returns the built-in [Variant] type of the typed array as a [enum " "Variant.Type] constant. If the array is not typed, returns [constant " "TYPE_NIL]. See also [method is_typed]." msgstr "" "Devuelve el tipo [Variant] incorporado del array tipado como una constante " "[enum Variant.Type]. Si el array no está tipado, devuelve [constant " "TYPE_NIL]. Véase también [method is_typed]." msgid "" "Returns the [b]built-in[/b] class name of the typed array, if the built-in " "[Variant] type [constant TYPE_OBJECT]. Otherwise, returns an empty " "[StringName]. See also [method is_typed] and [method Object.get_class]." msgstr "" "Devuelve el nombre de la clase [b]incorporada[/b] del array tipado, si el " "tipo [Variant] incorporado es [constant TYPE_OBJECT]. De lo contrario, " "devuelve un [StringName] vacío. Véase también [method is_typed] y [method " "Object.get_class]." msgid "" "Returns the [Script] instance associated with this typed array, or " "[code]null[/code] if it does not exist. See also [method is_typed]." msgstr "" "Devuelve la instancia de [Script] asociada con este array tipado, o " "[code]null[/code] si no existe. Véase también [method is_typed]." msgid "" "Returns [code]true[/code] if the array contains the given [param value].\n" "[codeblocks]\n" "[gdscript]\n" "print([\"inside\", 7].has(\"inside\")) # Prints true\n" "print([\"inside\", 7].has(\"outside\")) # Prints false\n" "print([\"inside\", 7].has(7)) # Prints true\n" "print([\"inside\", 7].has(\"7\")) # Prints false\n" "[/gdscript]\n" "[csharp]\n" "Godot.Collections.Array arr = [\"inside\", 7];\n" "// By C# convention, this method is renamed to `Contains`.\n" "GD.Print(arr.Contains(\"inside\")); // Prints True\n" "GD.Print(arr.Contains(\"outside\")); // Prints False\n" "GD.Print(arr.Contains(7)); // Prints True\n" "GD.Print(arr.Contains(\"7\")); // Prints False\n" "[/csharp]\n" "[/codeblocks]\n" "In GDScript, this is equivalent to the [code]in[/code] operator:\n" "[codeblock]\n" "if 4 in [2, 4, 6, 8]:\n" "\tprint(\"4 is here!\") # Will be printed.\n" "[/codeblock]\n" "[b]Note:[/b] For performance reasons, the search is affected by the [param " "value]'s [enum Variant.Type]. For example, [code]7[/code] ([int]) and " "[code]7.0[/code] ([float]) are not considered equal for this method." msgstr "" "Devuelve [code]true[/code] si el array contiene el [param value] dado.\n" "[codeblocks]\n" "[gdscript]\n" "print([\"inside\", 7].has(\"inside\")) # Imprime true\n" "print([\"inside\", 7].has(\"outside\")) # Imprime false\n" "print([\"inside\", 7].has(7)) # Imprime true\n" "print([\"inside\", 7].has(\"7\")) # Imprime false\n" "[/gdscript]\n" "[csharp]\n" "Godot.Collections.Array arr = [\"inside\", 7];\n" "// Por convención de C#, este método se renombra a `Contains`.\n" "GD.Print(arr.Contains(\"inside\")); // Imprime True\n" "GD.Print(arr.Contains(\"outside\")); // Imprime False\n" "GD.Print(arr.Contains(7)); // Imprime True\n" "GD.Print(arr.Contains(\"7\")); // Imprime False\n" "[/csharp]\n" "[/codeblocks]\n" "En GDScript, esto es equivalente al operador [code]in[/code]:\n" "[codeblock]\n" "if 4 in [2, 4, 6, 8]:\n" "\tprint(\"¡4 está aquí!\") # Se imprimirá.\n" "[/codeblock]\n" "[b]Nota:[/b] Por razones de rendimiento, la búsqueda se ve afectada por el " "[enum Variant.Type] del [param value]. Por ejemplo, [code]7[/code] ([int]) y " "[code]7.0[/code] ([float]) no se consideran iguales para este método." msgid "" "Returns a hashed 32-bit integer value representing the array and its " "contents.\n" "[b]Note:[/b] Arrays with equal hash values are [i]not[/i] guaranteed to be " "the same, as a result of hash collisions. On the contrary, arrays with " "different hash values are guaranteed to be different." msgstr "" "Devuelve un valor entero hash de 32 bits que representa el array y su " "contenido.\n" "[b]Nota:[/b] [i]No[/i] se garantiza que los arrays con valores hash iguales " "sean idénticos, como resultado de las colisiones hash. Por el contrario, se " "garantiza que los arrays con valores hash diferentes sean distintos." msgid "" "Inserts a new element ([param value]) at a given index ([param position]) in " "the array. [param position] should be between [code]0[/code] and the array's " "[method size]. If negative, [param position] is considered relative to the " "end of the array.\n" "Returns [constant OK] on success, or one of the other [enum Error] constants " "if this method fails.\n" "[b]Note:[/b] Every element's index after [param position] needs to be shifted " "forward, which may have a noticeable performance cost, especially on larger " "arrays." msgstr "" "Inserta un nuevo elemento ([param value]) en un índice dado ([param " "position]) en el array. [param position] debe estar entre [code]0[/code] y el " "[method size] del array. Si es negativo, [param position] se considera " "relativo al final del array.\n" "Devuelve [constant OK] si tiene éxito, o una de las otras constantes [enum " "Error] si este método falla.\n" "[b]Nota:[/b] El índice de cada elemento después de [param position] necesita " "ser desplazado hacia adelante, lo que puede tener un costo de rendimiento " "notable, especialmente en arrays más grandes." msgid "" "Returns [code]true[/code] if the array is empty ([code][][/code]). See also " "[method size]." msgstr "" "Devuelve [code]true[/code] si el array está vacío ([code][][/code]). Véase " "también [method size]." msgid "" "Returns [code]true[/code] if the array is read-only. See [method " "make_read_only].\n" "In GDScript, arrays are automatically read-only if declared with the " "[code]const[/code] keyword." msgstr "" "Devuelve [code]true[/code] si el array es de solo lectura. Véase [method " "make_read_only].\n" "En GDScript, los arrays son automáticamente de solo lectura si se declaran " "con la palabra clave [code]const[/code]." msgid "" "Returns [code]true[/code] if this array is typed the same as the given [param " "array]. See also [method is_typed]." msgstr "" "Devuelve [code]true[/code] si este array tiene el mismo tipo que el [param " "array] dado. Véase también [method is_typed]." msgid "" "Returns [code]true[/code] if the array is typed. Typed arrays can only " "contain elements of a specific type, as defined by the typed array " "constructor. The methods of a typed array are still expected to return a " "generic [Variant].\n" "In GDScript, it is possible to define a typed array with static typing:\n" "[codeblock]\n" "var numbers: Array[float] = [0.2, 4.2, -2.0]\n" "print(numbers.is_typed()) # Prints true\n" "[/codeblock]" msgstr "" "Devuelve [code]true[/code] si el array está tipado. Los arrays tipados solo " "pueden contener elementos de un tipo específico, tal como lo define el " "constructor de array tipado. Se espera que los métodos de un array tipado " "devuelvan un [Variant] genérico.\n" "En GDScript, es posible definir un array tipado con tipado estático:\n" "[codeblock]\n" "var numbers: Array[float] = [0.2, 4.2, -2.0]\n" "print(numbers.is_typed()) # Imprime true\n" "[/codeblock]" msgid "" "Makes the array read-only. The array's elements cannot be overridden with " "different values, and their order cannot change. Does not apply to nested " "elements, such as dictionaries.\n" "In GDScript, arrays are automatically read-only if declared with the " "[code]const[/code] keyword." msgstr "" "Hace que el array sea de solo lectura. Los elementos del array no pueden ser " "sobrescritos con diferentes valores, y su orden no puede cambiar. No se " "aplica a los elementos anidados, como los diccionarios.\n" "En GDScript, los arrays son automáticamente de solo lectura si se declaran " "con la palabra clave [code]const[/code]." msgid "" "Calls the given [Callable] for each element in the array and returns a new " "array filled with values returned by the [param method].\n" "The [param method] should take one [Variant] parameter (the current array " "element) and can return any [Variant].\n" "[codeblock]\n" "func double(number):\n" "\treturn number * 2\n" "\n" "func _ready():\n" "\tprint([1, 2, 3].map(double)) # Prints [2, 4, 6]\n" "\n" "\t# Same as above, but using a lambda function.\n" "\tprint([1, 2, 3].map(func(element): return element * 2))\n" "[/codeblock]\n" "See also [method filter], [method reduce], [method any] and [method all]." msgstr "" "Llama al [Callable] dado para cada elemento del arreglo y devuelve un nuevo " "arreglo con los valores devueltos por [param method].\n" "El [param method] debe recibir un parámetro [Variant] (el elemento actual del " "arreglo) y puede devolver cualquier [Variant].\n" "[codeblock]\n" "func double(number):\n" "\treturn number * 2\n" "\n" "func _ready():\n" "\tprint([1, 2, 3].map(double)) # Imprime [2, 4, 6]\n" "\n" "\t# Igual que arriba, pero usando una función lambda.\n" "\tprint([1, 2, 3].map(func(element): return element * 2))\n" "[/codeblock]\n" "Véase también [method filter], [method reduce], [method any] y [method all]." msgid "" "Returns the maximum value contained in the array, if all elements can be " "compared. Otherwise, returns [code]null[/code]. See also [method min].\n" "To find the maximum value using a custom comparator, you can use [method " "reduce]." msgstr "" "Devuelve el valor máximo contenido en el array, si todos los elementos se " "pueden comparar. De lo contrario, devuelve [code]null[/code]. Véase también " "[method min].\n" "Para encontrar el valor máximo utilizando un comparador personalizado, puedes " "usar [method reduce]." msgid "" "Returns the minimum value contained in the array, if all elements can be " "compared. Otherwise, returns [code]null[/code]. See also [method max]." msgstr "" "Devuelve el valor mínimo contenido en el array, si todos los elementos se " "pueden comparar. De lo contrario, devuelve [code]null[/code]. Véase también " "[method max]." msgid "" "Returns a random element from the array. Generates an error and returns " "[code]null[/code] if the array is empty.\n" "[codeblocks]\n" "[gdscript]\n" "# May print 1, 2, 3.25, or \"Hi\".\n" "print([1, 2, 3.25, \"Hi\"].pick_random())\n" "[/gdscript]\n" "[csharp]\n" "Godot.Collections.Array array = [1, 2, 3.25f, \"Hi\"];\n" "GD.Print(array.PickRandom()); // May print 1, 2, 3.25, or \"Hi\".\n" "[/csharp]\n" "[/codeblocks]\n" "[b]Note:[/b] Like many similar functions in the engine (such as [method " "@GlobalScope.randi] or [method shuffle]), this method uses a common, global " "random seed. To get a predictable outcome from this method, see [method " "@GlobalScope.seed]." msgstr "" "Devuelve un elemento aleatorio del arreglo. Genera un error y devuelve " "[code]null[/code] si el arreglo está vacío.\n" "[codeblocks]\n" "[gdscript]\n" "# Puede imprimir 1, 2, 3.25 o \"Hi\".\n" "print([1, 2, 3.25, \"Hi\"].pick_random())\n" "[/gdscript]\n" "[csharp]\n" "Godot.Collections.Array array = [1, 2, 3.25f, \"Hi\"];\n" "GD.Print(array.PickRandom()); // Puede imprimir 1, 2, 3.25 o \"Hi\".\n" "[/csharp]\n" "[/codeblocks]\n" "[b]Nota:[/b] Al igual que muchas funciones similares en el motor (como " "[method @GlobalScope.randi] o [method shuffle]), este método utiliza una " "semilla aleatoria global común. Para obtener un resultado predecible con este " "método, véase [method @GlobalScope.seed]." msgid "" "Removes and returns the element of the array at index [param position]. If " "negative, [param position] is considered relative to the end of the array. " "Returns [code]null[/code] if the array is empty. If [param position] is out " "of bounds, an error message is also generated.\n" "[b]Note:[/b] This method shifts every element's index after [param position] " "back, which may have a noticeable performance cost, especially on larger " "arrays." msgstr "" "Elimina y devuelve el elemento del array en el índice [param position]. Si es " "negativo, [param position] se considera relativo al final del array. Devuelve " "[code]null[/code] si el array está vacío. Si [param position] está fuera de " "los límites, también se genera un mensaje de error.\n" "[b]Nota:[/b] Este método desplaza hacia atrás el índice de cada elemento " "después de [param position], lo que puede tener un costo de rendimiento " "notable, especialmente en arrays grandes." msgid "" "Removes and returns the last element of the array. Returns [code]null[/code] " "if the array is empty, without generating an error. See also [method " "pop_front]." msgstr "" "Elimina y devuelve el ultimo elemento del array. Devuelve [code]null[/code] " "si el array esta vacío, sin generar un error. Véase también [method " "pop_front]." msgid "" "Removes and returns the first element of the array. Returns [code]null[/code] " "if the array is empty, without generating an error. See also [method " "pop_back].\n" "[b]Note:[/b] This method shifts every other element's index back, which may " "have a noticeable performance cost, especially on larger arrays." msgstr "" "Elimina y devuelve el primer elemento del array. Devuelve [code]null[/code] " "si el array está vacío, sin mostrar un mensaje de error. Véase también " "[method pop_back].\n" "[b]Note:[/b] En arrays largos, este método es mucho más lento que [method " "pop_back] debido a que tiene que re-indexar todos los elementos del array " "cada vez que es llamado. Mientras más largo el array, más lento será [method " "pop_front]." msgid "" "Appends an element at the end of the array. See also [method push_front]." msgstr "Agrega un elemento al final del array (alias de [method push_back])." msgid "" "Calls the given [Callable] for each element in array, accumulates the result " "in [param accum], then returns it.\n" "The [param method] takes two arguments: the current value of [param accum] " "and the current array element. If [param accum] is [code]null[/code] (as by " "default), the iteration will start from the second element, with the first " "one used as initial value of [param accum].\n" "[codeblock]\n" "func sum(accum, number):\n" "\treturn accum + number\n" "\n" "func _ready():\n" "\tprint([1, 2, 3].reduce(sum, 0)) # Prints 6\n" "\tprint([1, 2, 3].reduce(sum, 10)) # Prints 16\n" "\n" "\t# Same as above, but using a lambda function.\n" "\tprint([1, 2, 3].reduce(func(accum, number): return accum + number, 10))\n" "[/codeblock]\n" "If [method max] is not desirable, this method may also be used to implement a " "custom comparator:\n" "[codeblock]\n" "func _ready():\n" "\tvar arr = [Vector2i(5, 0), Vector2i(3, 4), Vector2i(1, 2)]\n" "\n" "\tvar longest_vec = arr.reduce(func(max, vec): return vec if " "is_length_greater(vec, max) else max)\n" "\tprint(longest_vec) # Prints (3, 4)\n" "\n" "func is_length_greater(a, b):\n" "\treturn a.length() > b.length()\n" "[/codeblock]\n" "This method can also be used to count how many elements in an array satisfy a " "certain condition, similar to [method count]:\n" "[codeblock]\n" "func is_even(number):\n" "\treturn number % 2 == 0\n" "\n" "func _ready():\n" "\tvar arr = [1, 2, 3, 4, 5]\n" "\t# If the current element is even, increment count, otherwise leave count " "the same.\n" "\tvar even_count = arr.reduce(func(count, next): return count + 1 if " "is_even(next) else count, 0)\n" "\tprint(even_count) # Prints 2\n" "[/codeblock]\n" "See also [method map], [method filter], [method any], and [method all]." msgstr "" "Llama al [Callable] dado para cada elemento del arreglo, acumula el resultado " "en [param accum] y luego lo devuelve.\n" "El [param method] recibe dos argumentos: el valor actual de [param accum] y " "el elemento actual del arreglo. Si [param accum] es [code]null[/code] (como " "por defecto), la iteración comenzará desde el segundo elemento, utilizando el " "primero como valor inicial de [param accum].\n" "[codeblock]\n" "func sum(accum, number):\n" "\treturn accum + number\n" "\n" "func _ready():\n" "\tprint([1, 2, 3].reduce(sum, 0)) # Imprime 6\n" "\tprint([1, 2, 3].reduce(sum, 10)) # Imprime 16\n" "\n" "\t# Igual que arriba, pero usando una función lambda.\n" "\tprint([1, 2, 3].reduce(func(accum, number): return accum + number, 10))\n" "[/codeblock]\n" "Si [method max] no es adecuado, este método también puede utilizarse para " "implementar un comparador personalizado:\n" "[codeblock]\n" "func _ready():\n" "\tvar arr = [Vector2i(5, 0), Vector2i(3, 4), Vector2i(1, 2)]\n" "\n" "\tvar longest_vec = arr.reduce(func(max, vec): return vec if " "is_length_greater(vec, max) else max)\n" "\tprint(longest_vec) # Imprime (3, 4)\n" "\n" "func is_length_greater(a, b):\n" "\treturn a.length() > b.length()\n" "[/codeblock]\n" "Este método también puede utilizarse para contar cuántos elementos de un " "arreglo cumplen cierta condición, de forma similar a [method count]:\n" "[codeblock]\n" "func is_even(number):\n" "\treturn number % 2 == 0\n" "\n" "func _ready():\n" "\tvar arr = [1, 2, 3, 4, 5]\n" "\t# Si el elemento actual es par, incrementa el contador; de lo contrario, lo " "deja igual.\n" "\tvar even_count = arr.reduce(func(count, next): return count + 1 if " "is_even(next) else count, 0)\n" "\tprint(even_count) # Imprime 2\n" "[/codeblock]\n" "Véase también [method map], [method filter], [method any] y [method all]." msgid "" "Removes the element from the array at the given index ([param position]). If " "the index is out of bounds, this method fails. If the index is negative, " "[param position] is considered relative to the end of the array.\n" "If you need to return the removed element, use [method pop_at]. To remove an " "element by value, use [method erase] instead.\n" "[b]Note:[/b] This method shifts every element's index after [param position] " "back, which may have a noticeable performance cost, especially on larger " "arrays." msgstr "" "Elimina el elemento del array en el índice dado ([param position]). Si el " "índice está fuera de los límites, este método falla. Si el índice es " "negativo, [param position] se considera relativo al final del array.\n" "Si necesitas devolver el elemento eliminado, usa [method pop_at]. Para " "eliminar un elemento por valor, usa [method erase] en su lugar.\n" "[b]Nota:[/b] Este método desplaza hacia atrás el índice de cada elemento " "después de [param position], lo que puede tener un coste de rendimiento " "notable, especialmente en arrays grandes." msgid "" "Sets the array's number of elements to [param size]. If [param size] is " "smaller than the array's current size, the elements at the end are removed. " "If [param size] is greater, new default elements (usually [code]null[/code]) " "are added, depending on the array's type.\n" "Returns [constant OK] on success, or one of the following [enum Error] " "constants if this method fails: [constant ERR_LOCKED] if the array is read-" "only, [constant ERR_INVALID_PARAMETER] if the size is negative, or [constant " "ERR_OUT_OF_MEMORY] if allocations fail. Use [method size] to find the actual " "size of the array after resize.\n" "[b]Note:[/b] Calling this method once and assigning the new values is faster " "than calling [method append] for every new element." msgstr "" "Establece el número de elementos del array a [param size]. Si [param size] es " "menor que el tamaño actual del array, se eliminan los elementos al final. Si " "[param size] es mayor, se añaden nuevos elementos predeterminados (usualmente " "[code]null[/code]), dependiendo del tipo del array.\n" "Devuelve [constant OK] si tiene éxito, o una de las siguientes constantes " "[enum Error] si este método falla: [constant ERR_LOCKED] si el array es de " "solo lectura, [constant ERR_INVALID_PARAMETER] si el tamaño es negativo, o " "[constant ERR_OUT_OF_MEMORY] si fallan las asignaciones. Usa [method size] " "para encontrar el tamaño real del array después de redimensionar.\n" "[b]Nota:[/b] Llamar a este método una vez y asignar los nuevos valores es más " "rápido que llamar a [method append] para cada nuevo elemento." msgid "Reverses the order of all elements in the array." msgstr "Invierte el orden de todos los elementos del array." msgid "" "Returns the index of the [b]last[/b] occurrence of [param what] in this " "array, or [code]-1[/code] if there are none. The search's start can be " "specified with [param from], continuing to the beginning of the array. This " "method is the reverse of [method find]." msgstr "" "Devuelve el índice de la [b]última[/b] aparición de [param what] en este " "arreglo, o [code]-1[/code] si no existe ninguna. El inicio de la búsqueda " "puede especificarse con [param from], continuando hacia el comienzo del " "arreglo. Este método es el inverso de [method find]." msgid "" "Returns the index of the [b]last[/b] element of the array that causes [param " "method] to return [code]true[/code], or [code]-1[/code] if there are none. " "The search's start can be specified with [param from], continuing to the " "beginning of the array. This method is the reverse of [method find_custom]." msgstr "" "Devuelve el índice del [b]último[/b] elemento que produce que [param method] " "devuelva [code]true[/code], o [code]-1[/code] si no existe ninguno. El inicio " "de la búsqueda puede especificarse con [param from], continuando hacia el " "comienzo del arreglo. Este método es el inverso de [method find_custom]." msgid "" "Sets the value of the element at the given [param index] to the given [param " "value]. This will not change the size of the array, it only changes the value " "at an index already in the array. This is the same as using the [code][][/" "code] operator ([code]array[index] = value[/code])." msgstr "" "Asigna el [param value] al elemento en el [param index] indicado. Esto no " "cambia el tamaño del arreglo; únicamente modifica el valor en un índice que " "ya existe. Es equivalente a usar el operador [code][][/code] " "([code]array[index] = value[/code])." msgid "" "Shuffles all elements of the array in a random order.\n" "[b]Note:[/b] Like many similar functions in the engine (such as [method " "@GlobalScope.randi] or [method pick_random]), this method uses a common, " "global random seed. To get a predictable outcome from this method, see " "[method @GlobalScope.seed]." msgstr "" "Reordena todos los elementos del arreglo en un orden aleatorio.\n" "[b]Nota:[/b] Al igual que muchas funciones similares en el motor (como " "[method @GlobalScope.randi] o [method pick_random]), este método utiliza una " "semilla aleatoria global compartida. Para obtener un resultado predecible con " "este método, véase [method @GlobalScope.seed]." msgid "" "Returns the number of elements in the array. Empty arrays ([code][][/code]) " "always return [code]0[/code]. See also [method is_empty]." msgstr "" "Devuelve el número de elementos en el array. Si el array está vacío ([code][]" "[/code]), devuelve [code]0[/code]. Ver también [method is_empty]." msgid "" "Returns a new [Array] containing this array's elements, from index [param " "begin] (inclusive) to [param end] (exclusive), every [param step] elements.\n" "If either [param begin] or [param end] are negative, their value is relative " "to the end of the array.\n" "If [param step] is negative, this method iterates through the array in " "reverse, returning a slice ordered backwards. For this to work, [param begin] " "must be greater than [param end].\n" "If [param deep] is [code]true[/code], all nested [Array] and [Dictionary] " "elements in the slice are duplicated from the original, recursively. See also " "[method duplicate].\n" "[codeblock]\n" "var letters = [\"A\", \"B\", \"C\", \"D\", \"E\", \"F\"]\n" "\n" "print(letters.slice(0, 2)) # Prints [\"A\", \"B\"]\n" "print(letters.slice(2, -2)) # Prints [\"C\", \"D\"]\n" "print(letters.slice(-2, 6)) # Prints [\"E\", \"F\"]\n" "\n" "print(letters.slice(0, 6, 2)) # Prints [\"A\", \"C\", \"E\"]\n" "print(letters.slice(4, 1, -1)) # Prints [\"E\", \"D\", \"C\"]\n" "[/codeblock]" msgstr "" "Devuelve un nuevo [Array] que contiene los elementos de este arreglo, desde " "el índice [param begin] (inclusive) hasta [param end] (exclusivo), saltando " "tanto elementos como se indique en [param step].\n" "Si [param begin] o [param end] son negativos, su valor se interpreta relativo " "al final del arreglo.\n" "Si [param step] es negativo, este método recorre el arreglo en orden inverso, " "devolviendo una porción en orden descendente. Para que esto funcione, [param " "begin] debe ser mayor que [param end].\n" "Si [param deep] es [code]true[/code], todos los elementos anidados de tipo " "[Array] y [Dictionary] en la porción se duplican recursivamente a partir del " "original. Véase también [method duplicate].\n" "[codeblock]\n" "var letters = [\"A\", \"B\", \"C\", \"D\", \"E\", \"F\"]\n" "\n" "print(letters.slice(0, 2)) # Imprime [\"A\", \"B\"]\n" "print(letters.slice(2, -2)) # Imprime [\"C\", \"D\"]\n" "print(letters.slice(-2, 6)) # Imprime [\"E\", \"F\"]\n" "\n" "print(letters.slice(0, 6, 2)) # Imprime [\"A\", \"C\", \"E\"]\n" "print(letters.slice(4, 1, -1)) # Imprime [\"E\", \"D\", \"C\"]\n" "[/codeblock]" msgid "" "Sorts the array in ascending order. The final order is dependent on the " "\"less than\" ([code]<[/code]) comparison between elements.\n" "[codeblocks]\n" "[gdscript]\n" "var numbers = [10, 5, 2.5, 8]\n" "numbers.sort()\n" "print(numbers) # Prints [2.5, 5, 8, 10]\n" "[/gdscript]\n" "[csharp]\n" "Godot.Collections.Array numbers = [10, 5, 2.5, 8];\n" "numbers.Sort();\n" "GD.Print(numbers); // Prints [2.5, 5, 8, 10]\n" "[/csharp]\n" "[/codeblocks]\n" "[b]Note:[/b] The sorting algorithm used is not [url=https://en.wikipedia.org/" "wiki/Sorting_algorithm#Stability]stable[/url]. This means that equivalent " "elements (such as [code]2[/code] and [code]2.0[/code]) may have their order " "changed when calling [method sort]." msgstr "" "Ordena el arreglo en orden ascendente. El orden final depende de la " "comparación \"menor que\" ([code]<[/code]) entre los elementos.\n" "[codeblocks]\n" "[gdscript]\n" "var numbers = [10, 5, 2.5, 8]\n" "numbers.sort()\n" "print(numbers) # Imprime [2.5, 5, 8, 10]\n" "[/gdscript]\n" "[csharp]\n" "Godot.Collections.Array numbers = [10, 5, 2.5, 8];\n" "numbers.Sort();\n" "GD.Print(numbers); // Imprime [2.5, 5, 8, 10]\n" "[/csharp]\n" "[/codeblocks]\n" "[b]Nota:[/b] El algoritmo de ordenamiento usado no es [url=https://" "es.wikipedia.org/wiki/Algoritmo_de_ordenamiento#Estabilidad]estable[/url]. " "Esto significa que elementos equivalentes (como [code]2[/code] y [code]2.0[/" "code]) pueden cambiar de orden al llamar a [method sort]." msgid "" "Sorts the array using a custom [Callable].\n" "[param func] is called as many times as necessary, receiving two array " "elements as arguments. The function should return [code]true[/code] if the " "first element should be moved [i]before[/i] the second one, otherwise it " "should return [code]false[/code].\n" "[codeblock]\n" "func sort_ascending(a, b):\n" "\tif a[1] < b[1]:\n" "\t\treturn true\n" "\treturn false\n" "\n" "func _ready():\n" "\tvar my_items = [[\"Tomato\", 5], [\"Apple\", 9], [\"Rice\", 4]]\n" "\tmy_items.sort_custom(sort_ascending)\n" "\tprint(my_items) # Prints [[\"Rice\", 4], [\"Tomato\", 5], [\"Apple\", 9]]\n" "\n" "\t# Sort descending, using a lambda function.\n" "\tmy_items.sort_custom(func(a, b): return a[1] > b[1])\n" "\tprint(my_items) # Prints [[\"Apple\", 9], [\"Tomato\", 5], [\"Rice\", 4]]\n" "[/codeblock]\n" "It may also be necessary to use this method to sort strings by natural order, " "with [method String.naturalnocasecmp_to], as in the following example:\n" "[codeblock]\n" "var files = [\"newfile1\", \"newfile2\", \"newfile10\", \"newfile11\"]\n" "files.sort_custom(func(a, b): return a.naturalnocasecmp_to(b) < 0)\n" "print(files) # Prints [\"newfile1\", \"newfile2\", \"newfile10\", " "\"newfile11\"]\n" "[/codeblock]\n" "[b]Note:[/b] In C#, this method is not supported.\n" "[b]Note:[/b] The sorting algorithm used is not [url=https://en.wikipedia.org/" "wiki/Sorting_algorithm#Stability]stable[/url]. This means that values " "considered equal may have their order changed when calling this method.\n" "[b]Note:[/b] You should not randomize the return value of [param func], as " "the heapsort algorithm expects a consistent result. Randomizing the return " "value will result in unexpected behavior." msgstr "" "Ordena el arreglo usando un [Callable] personalizado.\n" "[param func] se llama tantas veces como sea necesario, recibiendo dos " "elementos del arreglo como argumentos. La función debe devolver [code]true[/" "code] si el primer elemento debe colocarse [i]antes[/i] del segundo, de lo " "contrario debe devolver [code]false[/code].\n" "[codeblock]\n" "func sort_ascending(a, b):\n" "\tif a[1] < b[1]:\n" "\t\treturn true\n" "\treturn false\n" "\n" "func _ready():\n" "\tvar my_items = [[\"Tomato\", 5], [\"Apple\", 9], [\"Rice\", 4]]\n" "\tmy_items.sort_custom(sort_ascending)\n" "\tprint(my_items) # Imprime [[\"Rice\", 4], [\"Tomato\", 5], [\"Apple\", 9]]\n" "\n" "\t# Orden descendente usando una función lambda.\n" "\tmy_items.sort_custom(func(a, b): return a[1] > b[1])\n" "\tprint(my_items) # Imprime [[\"Apple\", 9], [\"Tomato\", 5], [\"Rice\", 4]]\n" "[/codeblock]\n" "También puede ser necesario usar este método para ordenar cadenas por orden " "natural, con [method String.naturalnocasecmp_to], como en el siguiente " "ejemplo:\n" "[codeblock]\n" "var files = [\"newfile1\", \"newfile2\", \"newfile10\", \"newfile11\"]\n" "files.sort_custom(func(a, b): return a.naturalnocasecmp_to(b) < 0)\n" "print(files) # Imprime [\"newfile1\", \"newfile2\", \"newfile10\", " "\"newfile11\"]\n" "[/codeblock]\n" "[b]Nota:[/b] En C#, este método no está soportado.\n" "[b]Nota:[/b] El algoritmo de ordenamiento usado no es [url=https://" "es.wikipedia.org/wiki/Algoritmo_de_ordenamiento#Estabilidad]estable[/url]. " "Esto significa que valores considerados iguales pueden cambiar de orden al " "usar este método.\n" "[b]Nota:[/b] No se debe aleatorizar el valor devuelto por [param func], ya " "que el algoritmo heapsort espera un resultado consistente. Aleatorizarlo " "puede producir comportamientos inesperados." msgid "" "Returns [code]true[/code] if the array's size or its elements are different " "than [param right]'s." msgstr "" "Devuelve [code]true[/code] si el tamaño del arreglo o sus elementos son " "diferentes a los de [param right]." msgid "" "Appends the [param right] array to the left operand, creating a new [Array]. " "This is also known as an array concatenation.\n" "[codeblocks]\n" "[gdscript]\n" "var array1 = [\"One\", 2]\n" "var array2 = [3, \"Four\"]\n" "print(array1 + array2) # Prints [\"One\", 2, 3, \"Four\"]\n" "[/gdscript]\n" "[csharp]\n" "// Note that concatenation is not possible with C#'s native Array type.\n" "Godot.Collections.Array array1 = [\"One\", 2];\n" "Godot.Collections.Array array2 = [3, \"Four\"];\n" "GD.Print(array1 + array2); // Prints [\"One\", 2, 3, \"Four\"]\n" "[/csharp]\n" "[/codeblocks]\n" "[b]Note:[/b] For existing arrays, [method append_array] is much more " "efficient than concatenation and assignment with the [code]+=[/code] operator." msgstr "" "Agrega el arreglo [param right] al operando izquierdo, creando un nuevo " "[Array]. Esto también se conoce como concatenación de arreglos.\n" "[codeblocks]\n" "[gdscript]\n" "var array1 = [\"Uno\", 2]\n" "var array2 = [3, \"Cuatro\"]\n" "print(array1 + array2) # Imprime [\"Uno\", 2, 3, \"Cuatro\"]\n" "[/gdscript]\n" "[csharp]\n" "// Nota: La concatenación no es posible con el tipo nativo Array de C#.\n" "Godot.Collections.Array array1 = [\"Uno\", 2];\n" "Godot.Collections.Array array2 = [3, \"Cuatro\"];\n" "GD.Print(array1 + array2); // Imprime [\"Uno\", 2, 3, \"Cuatro\"]\n" "[/csharp]\n" "[/codeblocks]\n" "[b]Nota:[/b] Para arreglos existentes, [method append_array] es mucho más " "eficiente que concatenar y asignar usando el operador [code]+=[/code]." msgid "" "Compares the elements of both arrays in order, starting from index [code]0[/" "code] and ending on the last index in common between both arrays. For each " "pair of elements, returns [code]true[/code] if this array's element is less " "than [param right]'s, [code]false[/code] if this element is greater. " "Otherwise, continues to the next pair.\n" "If all searched elements are equal, returns [code]true[/code] if this array's " "size is less than [param right]'s, otherwise returns [code]false[/code]." msgstr "" "Compara los elementos de ambos arreglos en orden, comenzando desde el índice " "[code]0[/code] y hasta el último índice que tengan en común ambos arreglos. " "Para cada par de elementos, devuelve [code]true[/code] si el elemento de este " "arreglo es menor que el correspondiente en [param right], y [code]false[/" "code] si es mayor. De lo contrario, continúa con el siguiente par.\n" "Si todos los elementos comparados son iguales, devuelve [code]true[/code] si " "el tamaño de este arreglo es menor que el de [param right]; de lo contrario, " "devuelve [code]false[/code]." msgid "" "Compares the elements of both arrays in order, starting from index [code]0[/" "code] and ending on the last index in common between both arrays. For each " "pair of elements, returns [code]true[/code] if this array's element is less " "than [param right]'s, [code]false[/code] if this element is greater. " "Otherwise, continues to the next pair.\n" "If all searched elements are equal, returns [code]true[/code] if this array's " "size is less or equal to [param right]'s, otherwise returns [code]false[/" "code]." msgstr "" "Compara los elementos de ambos arrays en orden, empezando desde el índice " "[code]0[/code] y terminando en el último índice en común entre ambos arrays. " "Para cada par de elementos, devuelve [code]true[/code] si el elemento de este " "array es menor que el de [param right], [code]false[/code] si este elemento " "es mayor. De lo contrario, continúa con el siguiente par.\n" "Si todos los elementos buscados son iguales, devuelve [code]true[/code] si el " "tamaño de este array es menor o igual que el de [param right], de lo " "contrario devuelve [code]false[/code]." msgid "" "Compares the left operand [Array] against the [param right] [Array]. Returns " "[code]true[/code] if the sizes and contents of the arrays are equal, " "[code]false[/code] otherwise." msgstr "" "Compara el operando izquierdo [Array] contra el [Array] en [param right] . " "Devuelve [code]true[/code] si los tamaños y contenidos de los arrays son " "iguales, [code]false[/code] en caso contrario." msgid "" "Compares the elements of both arrays in order, starting from index [code]0[/" "code] and ending on the last index in common between both arrays. For each " "pair of elements, returns [code]true[/code] if this array's element is " "greater than [param right]'s, [code]false[/code] if this element is less. " "Otherwise, continues to the next pair.\n" "If all searched elements are equal, returns [code]true[/code] if this array's " "size is greater than [param right]'s, otherwise returns [code]false[/code]." msgstr "" "Compara los elementos de ambos arrays en orden, empezando desde el índice " "[code]0[/code] y terminando en el último índice en común entre ambos arrays. " "Para cada par de elementos, devuelve [code]true[/code] si el elemento de este " "array es mayor que el de [param right], [code]false[/code] si este elemento " "es menor. De lo contrario, continúa con el siguiente par.\n" "Si todos los elementos buscados son iguales, devuelve [code]true[/code] si el " "tamaño de este array es mayor que el de [param right], de lo contrario " "devuelve [code]false[/code]." msgid "" "Compares the elements of both arrays in order, starting from index [code]0[/" "code] and ending on the last index in common between both arrays. For each " "pair of elements, returns [code]true[/code] if this array's element is " "greater than [param right]'s, [code]false[/code] if this element is less. " "Otherwise, continues to the next pair.\n" "If all searched elements are equal, returns [code]true[/code] if this array's " "size is greater or equal to [param right]'s, otherwise returns [code]false[/" "code]." msgstr "" "Compara los elementos de ambos arrays en orden, empezando desde el índice " "[code]0[/code] y terminando en el último índice en común entre ambos arrays. " "Para cada par de elementos, devuelve [code]true[/code] si el elemento de este " "array es mayor que el de [param right], [code]false[/code] si este elemento " "es menor. De lo contrario, continúa con el siguiente par.\n" "Si todos los elementos buscados son iguales, devuelve [code]true[/code] si el " "tamaño de este array es mayor o igual que el de [param right], de lo " "contrario devuelve [code]false[/code]." msgid "" "Returns the [Variant] element at the specified [param index]. Arrays start at " "index 0. If [param index] is greater or equal to [code]0[/code], the element " "is fetched starting from the beginning of the array. If [param index] is a " "negative value, the element is fetched starting from the end. Accessing an " "array out-of-bounds will cause a run-time error, pausing the project " "execution if run from the editor." msgstr "" "Devuelve el elemento [Variant] en el [param index] especificado. Los arrays " "comienzan en el índice 0. Si [param index] es mayor o igual que [code]0[/" "code], el elemento se obtiene comenzando desde el principio del array. Si " "[param index] es un valor negativo, el elemento se obtiene comenzando desde " "el final. El acceso a un array fuera de los límites provocará un error en " "tiempo de ejecución, pausando la ejecución del proyecto si se ejecuta desde " "el editor." msgid "" "[Mesh] type that provides utility for constructing a surface from arrays." msgstr "" "Tipo [Mesh] que provee la funcionalidad para construir una superficie desde " "arrays." msgid "" "The [ArrayMesh] is used to construct a [Mesh] by specifying the attributes as " "arrays.\n" "The most basic example is the creation of a single triangle:\n" "[codeblocks]\n" "[gdscript]\n" "var vertices = PackedVector3Array()\n" "vertices.push_back(Vector3(0, 1, 0))\n" "vertices.push_back(Vector3(1, 0, 0))\n" "vertices.push_back(Vector3(0, 0, 1))\n" "\n" "# Initialize the ArrayMesh.\n" "var arr_mesh = ArrayMesh.new()\n" "var arrays = []\n" "arrays.resize(Mesh.ARRAY_MAX)\n" "arrays[Mesh.ARRAY_VERTEX] = vertices\n" "\n" "# Create the Mesh.\n" "arr_mesh.add_surface_from_arrays(Mesh.PRIMITIVE_TRIANGLES, arrays)\n" "var m = MeshInstance3D.new()\n" "m.mesh = arr_mesh\n" "[/gdscript]\n" "[csharp]\n" "Vector3[] vertices =\n" "[\n" "\tnew Vector3(0, 1, 0),\n" "\tnew Vector3(1, 0, 0),\n" "\tnew Vector3(0, 0, 1),\n" "];\n" "\n" "// Initialize the ArrayMesh.\n" "var arrMesh = new ArrayMesh();\n" "Godot.Collections.Array arrays = [];\n" "arrays.Resize((int)Mesh.ArrayType.Max);\n" "arrays[(int)Mesh.ArrayType.Vertex] = vertices;\n" "\n" "// Create the Mesh.\n" "arrMesh.AddSurfaceFromArrays(Mesh.PrimitiveType.Triangles, arrays);\n" "var m = new MeshInstance3D();\n" "m.Mesh = arrMesh;\n" "[/csharp]\n" "[/codeblocks]\n" "The [MeshInstance3D] is ready to be added to the [SceneTree] to be shown.\n" "See also [ImmediateMesh], [MeshDataTool] and [SurfaceTool] for procedural " "geometry generation.\n" "[b]Note:[/b] Godot uses clockwise [url=https://learnopengl.com/Advanced-" "OpenGL/Face-culling]winding order[/url] for front faces of triangle primitive " "modes." msgstr "" "El [ArrayMesh] se utiliza para construir un [Mesh] especificando los " "atributos como arrays.\n" "El ejemplo más básico es la creación de un único triángulo:\n" "[codeblocks]\n" "[gdscript]\n" "var vertices = PackedVector3Array()\n" "vertices.push_back(Vector3(0, 1, 0))\n" "vertices.push_back(Vector3(1, 0, 0))\n" "vertices.push_back(Vector3(0, 0, 1))\n" "\n" "# Initialize the ArrayMesh.\n" "var arr_mesh = ArrayMesh.new()\n" "var arrays = []\n" "arrays.resize(Mesh.ARRAY_MAX)\n" "arrays[Mesh.ARRAY_VERTEX] = vertices\n" "\n" "# Create the Mesh.\n" "arr_mesh.add_surface_from_arrays(Mesh.PRIMITIVE_TRIANGLES, arrays)\n" "var m = MeshInstance3D.new()\n" "m.mesh = arr_mesh\n" "[/gdscript]\n" "[csharp]\n" "Vector3[] vertices =\n" "[\n" "\tnew Vector3(0, 1, 0),\n" "\tnew Vector3(1, 0, 0),\n" "\tnew Vector3(0, 0, 1),\n" "];\n" "\n" "// Initialize the ArrayMesh.\n" "var arrMesh = new ArrayMesh();\n" "Godot.Collections.Array arrays = [];\n" "arrays.Resize((int)Mesh.ArrayType.Max);\n" "arrays[(int)Mesh.ArrayType.Vertex] = vertices;\n" "\n" "// Create the Mesh.\n" "arrMesh.AddSurfaceFromArrays(Mesh.PrimitiveType.Triangles, arrays);\n" "var m = new MeshInstance3D();\n" "m.Mesh = arrMesh;\n" "[/csharp]\n" "[/codeblocks]\n" "El [MeshInstance3D] está listo para ser añadido al [SceneTree] para " "mostrarse.\n" "Véase también [ImmediateMesh], [MeshDataTool] y [SurfaceTool] para la " "generación de geometría procedural.\n" "[b]Nota:[/b] Godot usa el [url=https://learnopengl.com/Advanced-OpenGL/Face-" "culling]winding order[/url] en sentido horario para las caras frontales de " "los modos primitivos de triángulo." msgid "Procedural geometry using the ArrayMesh" msgstr "Geometría procedimental usando ArrayMesh" msgid "" "Adds name for a blend shape that will be added with [method " "add_surface_from_arrays]. Must be called before surface is added." msgstr "" "Añade un nombre a una forma de mezcla que se añadira con [method " "add_surface_from_arrays]. Debe ser llamada antes que la superficie sea " "añadida." msgid "" "Creates a new surface. [method Mesh.get_surface_count] will become the " "[code]surf_idx[/code] for this new surface.\n" "Surfaces are created to be rendered using a [param primitive], which may be " "any of the values defined in [enum Mesh.PrimitiveType].\n" "The [param arrays] argument is an array of arrays. Each of the [constant " "Mesh.ARRAY_MAX] elements contains an array with some of the mesh data for " "this surface as described by the corresponding member of [enum " "Mesh.ArrayType] or [code]null[/code] if it is not used by the surface. For " "example, [code]arrays[0][/code] is the array of vertices. That first vertex " "sub-array is always required; the others are optional. Adding an index array " "puts this surface into \"index mode\" where the vertex and other arrays " "become the sources of data and the index array defines the vertex order. All " "sub-arrays must have the same length as the vertex array (or be an exact " "multiple of the vertex array's length, when multiple elements of a sub-array " "correspond to a single vertex) or be empty, except for [constant " "Mesh.ARRAY_INDEX] if it is used.\n" "The [param blend_shapes] argument is an array of vertex data for each blend " "shape. Each element is an array of the same structure as [param arrays], but " "[constant Mesh.ARRAY_VERTEX], [constant Mesh.ARRAY_NORMAL], and [constant " "Mesh.ARRAY_TANGENT] are set if and only if they are set in [param arrays] and " "all other entries are [code]null[/code].\n" "The [param lods] argument is a dictionary with [float] keys and " "[PackedInt32Array] values. Each entry in the dictionary represents an LOD " "level of the surface, where the value is the [constant Mesh.ARRAY_INDEX] " "array to use for the LOD level and the key is roughly proportional to the " "distance at which the LOD stats being used. I.e., increasing the key of an " "LOD also increases the distance that the objects has to be from the camera " "before the LOD is used.\n" "The [param flags] argument is the bitwise OR of, as required: One value of " "[enum Mesh.ArrayCustomFormat] left shifted by " "[code]ARRAY_FORMAT_CUSTOMn_SHIFT[/code] for each custom channel in use, " "[constant Mesh.ARRAY_FLAG_USE_DYNAMIC_UPDATE], [constant " "Mesh.ARRAY_FLAG_USE_8_BONE_WEIGHTS], or [constant " "Mesh.ARRAY_FLAG_USES_EMPTY_VERTEX_ARRAY].\n" "[b]Note:[/b] When using indices, it is recommended to only use points, lines, " "or triangles." msgstr "" "Crea una nueva superficie. [method Mesh.get_surface_count] se convertirá en " "el [code]surf_idx[/code] de esta nueva superficie.\n" "Las superficies se crean para ser renderizadas usando un [param primitive], " "que puede ser cualquiera de los valores definidos en [enum " "Mesh.PrimitiveType].\n" "El argumento [param arrays] es un arreglo de arreglos. Cada uno de los " "elementos [constant Mesh.ARRAY_MAX] contiene un arreglo con parte de los " "datos de la malla para esta superficie, según se describe en el miembro " "correspondiente de [enum Mesh.ArrayType], o [code]null[/code] si no se " "utiliza en la superficie. Por ejemplo, [code]arrays[0][/code] es el arreglo " "de vértices. Este primer sub-arreglo de vértices siempre es obligatorio; los " "demás son opcionales. Agregar un arreglo de índices coloca esta superficie en " "\"modo índice\", donde los arreglos de vértices y otros se usan como fuentes " "de datos y el arreglo de índices define el orden de los vértices. Todos los " "sub-arreglos deben tener la misma longitud que el arreglo de vértices (o ser " "un múltiplo exacto de la longitud del arreglo de vértices, cuando múltiples " "elementos de un sub-arreglo corresponden a un solo vértice) o estar vacíos, " "excepto [constant Mesh.ARRAY_INDEX] si se utiliza.\n" "El argumento [param blend_shapes] es un arreglo de datos de vértices para " "cada blend shape. Cada elemento es un arreglo con la misma estructura que " "[param arrays], pero [constant Mesh.ARRAY_VERTEX], [constant " "Mesh.ARRAY_NORMAL] y [constant Mesh.ARRAY_TANGENT] se establecen únicamente " "si están presentes en [param arrays] y todas las demás entradas son " "[code]null[/code].\n" "El argumento [param lods] es un diccionario con claves [float] y valores " "[PackedInt32Array]. Cada entrada del diccionario representa un nivel LOD de " "la superficie, donde el valor es el arreglo [constant Mesh.ARRAY_INDEX] que " "se utilizará para ese nivel LOD y la clave es aproximadamente proporcional a " "la distancia a la que se usará el LOD. Es decir, aumentar la clave de un LOD " "también aumenta la distancia a la que los objetos deben estar de la cámara " "antes de usar ese LOD.\n" "El argumento [param flags] es la operación OR a nivel de bits de, según se " "necesite: un valor de [enum Mesh.ArrayCustomFormat] desplazado a la izquierda " "por [code]ARRAY_FORMAT_CUSTOMn_SHIFT[/code] para cada canal personalizado en " "uso, [constant Mesh.ARRAY_FLAG_USE_DYNAMIC_UPDATE], [constant " "Mesh.ARRAY_FLAG_USE_8_BONE_WEIGHTS] o [constant " "Mesh.ARRAY_FLAG_USES_EMPTY_VERTEX_ARRAY].\n" "[b]Nota:[/b] Al usar índices, se recomienda emplear únicamente puntos, líneas " "o triángulos." msgid "Removes all blend shapes from this [ArrayMesh]." msgstr "Elimina todos las formas de mezcla de este [ArrayMesh]." msgid "Removes all surfaces from this [ArrayMesh]." msgstr "Elimina todas las superificies de este [ArrayMesh]." msgid "Returns the number of blend shapes that the [ArrayMesh] holds." msgstr "Devuelve el número de formas de mezcla que el [ArrayMesh] posee." msgid "Returns the name of the blend shape at this index." msgstr "Devuelve el nombre de la forma de mezcla de este indice." msgid "Regenerates tangents for each of the [ArrayMesh]'s surfaces." msgstr "" "Regenera las tangentes para cada una de las superficies del [ArrayMesh]." msgid "Sets the name of the blend shape at this index." msgstr "Establece el nombre de la blendshape en este indice." msgid "" "Returns the index of the first surface with this name held within this " "[ArrayMesh]. If none are found, -1 is returned." msgstr "" "Devuelve el indice de la primer superficie con este nombre mantenido dentro " "de este [ArrayMesh]. Si no es encontrado, -1 es devuelto." msgid "" "Returns the length in indices of the index array in the requested surface " "(see [method add_surface_from_arrays])." msgstr "" "Devuelve la longitud en indices del array de indices de la superificie " "solicitada( ver [method add_surface_from_arrays])." msgid "" "Returns the length in vertices of the vertex array in the requested surface " "(see [method add_surface_from_arrays])." msgstr "" "Devuelve la longitud en vertices del array de vertice en la superficie " "solicitada (ver[method add_surface_from_arrays])." msgid "" "Returns the format mask of the requested surface (see [method " "add_surface_from_arrays])." msgstr "" "Devuelve la mascara de formato de la superficie solicitada (ver[method " "add_surface_from_arrays])." msgid "Gets the name assigned to this surface." msgstr "Obtiene el nombre asignado a esta superficie." msgid "" "Returns the primitive type of the requested surface (see [method " "add_surface_from_arrays])." msgstr "" "Devuelve el tipo primitivo de la superficie solicitada (véase [method " "add_surface_from_arrays])." msgid "" "Removes the surface at the given index from the Mesh, shifting surfaces with " "higher index down by one." msgstr "" "Elimina la superficie en el índice dado de la Mesh, desplazando las " "superficies con un índice mayor hacia abajo en uno." msgid "Sets a name for a given surface." msgstr "Obtiene un nombre para una superficie dada." msgid "The blend shape mode." msgstr "El modo de blendshape." msgid "" "Overrides the [AABB] with one defined by user for use with frustum culling. " "Especially useful to avoid unexpected culling when using a shader to offset " "vertices." msgstr "" "Sobrescribe el [AABB] con uno definido por usuario para el uso con el " "tronco(frustum). Especialmente util para evitar inesperadas selecciones " "cuando se use un shader a vertices desplazados." msgid "" "An optional mesh which can be used for rendering shadows and the depth " "prepass. Can be used to increase performance by supplying a mesh with fused " "vertices and only vertex position data (without normals, UVs, colors, etc.).\n" "[b]Note:[/b] This mesh must have exactly the same vertex positions as the " "source mesh (including the source mesh's LODs, if present). If vertex " "positions differ, then the mesh will not draw correctly." msgstr "" "Una malla opcional que puede ser usada para renderizar sombras y el pre-pase " "de profundidad. Puede ser usada para aumentar el rendimiento suministrando " "una malla con vértices fusionados y solo datos de posición del vértice (sin " "normales, UVs, colores, etc.).\n" "[b]Nota:[/b] Esta malla debe tener exactamente las mismas posiciones de " "vértice que la malla fuente (incluyendo los LODs de la malla fuente, si están " "presentes). Si las posiciones de los vértices difieren, entonces la malla no " "se dibujará correctamente." msgid "3D polygon shape for use with occlusion culling in [OccluderInstance3D]." msgstr "" "Forma poligonal 3D para usar con la técnica \"occlusion culling\" en " "[OccluderInstance3D]." msgid "Occlusion culling" msgstr "Occlusion Culling" msgid "" "Sets [member indices] and [member vertices], while updating the final " "occluder only once after both values are set." msgstr "" "Establece [member indices] y [member vertices], mientras actualiza el oclusor " "final solo una vez después de que ambos valores han sido establecidos." msgid "" "The occluder's index position. Indices determine which points from the " "[member vertices] array should be drawn, and in which order.\n" "[b]Note:[/b] The occluder is always updated after setting this value. If " "creating occluders procedurally, consider using [method set_arrays] instead " "to avoid updating the occluder twice when it's created." msgstr "" "La posición del índice del oclusor. Los índices determinan qué puntos del " "array [member vertices] deben dibujarse, y en qué orden.\n" "[b]Nota:[/b] El oclusor siempre se actualiza después de establecer este " "valor. Si estás creando oclusores por procedimiento, considera usar [method " "set_arrays] en su lugar para evitar actualizar el oclusor dos veces cuando se " "crea." msgid "" "The occluder's vertex positions in local 3D coordinates.\n" "[b]Note:[/b] The occluder is always updated after setting this value. If " "creating occluders procedurally, consider using [method set_arrays] instead " "to avoid updating the occluder twice when it's created." msgstr "" "Las posiciones de los vértices del oclusor en coordenadas 3D locales.\n" "[b]Nota:[/b] El oclusor siempre se actualiza después de establecer este " "valor. Si estás creando oclusores por procedimiento, considera usar [method " "set_arrays] en su lugar para evitar actualizar el oclusor dos veces cuando se " "crea." msgid "A container that preserves the proportions of its child controls." msgstr "Un contenedor que conserva las proporciones de sus controles hijos." msgid "" "A container type that arranges its child controls in a way that preserves " "their proportions automatically when the container is resized. Useful when a " "container has a dynamic size and the child nodes must adjust their sizes " "accordingly without losing their aspect ratios." msgstr "" "Un tipo de contenedor que organiza sus controles secundarios de una manera " "que preserva sus proporciones automáticamente cuando el contenedor se " "redimensiona. Útil cuando un contenedor tiene un tamaño dinámico y los nodos " "secundarios deben ajustar sus tamaños en consecuencia sin perder sus " "relaciones de aspecto." msgid "Using Containers" msgstr "Usar Contenedores" msgid "Specifies the horizontal relative position of child controls." msgstr "Especifica la posición relativa horizontal de los controles hijos." msgid "Specifies the vertical relative position of child controls." msgstr "Especifica la posición relativa vertical de los controles hijos." msgid "" "The aspect ratio to enforce on child controls. This is the width divided by " "the height. The ratio depends on the [member stretch_mode]." msgstr "" "La proporción de aspecto que se aplicará a los controles hijos. Esta es la " "anchura dividida por la altura. La proporción depende del [member " "stretch_mode]." msgid "The stretch mode used to align child controls." msgstr "El modo de estiramiento utilizado para alinear los controles hijos." msgid "" "The height of child controls is automatically adjusted based on the width of " "the container." msgstr "" "La altura de los controles hijos se ajusta automáticamente en función del " "ancho del contenedor." msgid "" "The width of child controls is automatically adjusted based on the height of " "the container." msgstr "" "El ancho de los controles secundarios se ajusta automáticamente según la " "altura del contenedor." msgid "" "The bounding rectangle of child controls is automatically adjusted to fit " "inside the container while keeping the aspect ratio." msgstr "" "El rectángulo delimitador de los controles hijos se ajusta automáticamente " "para encajar dentro del contenedor manteniendo la proporción de aspecto." msgid "" "The width and height of child controls is automatically adjusted to make " "their bounding rectangle cover the entire area of the container while keeping " "the aspect ratio.\n" "When the bounding rectangle of child controls exceed the container's size and " "[member Control.clip_contents] is enabled, this allows to show only the " "container's area restricted by its own bounding rectangle." msgstr "" "El ancho y el alto de los controles secundarios se ajustan automáticamente " "para que su rectángulo delimitador cubra toda el área del contenedor, " "manteniendo al mismo tiempo la relación de aspecto.\n" "Cuando el rectángulo delimitador de los controles secundarios excede el " "tamaño del contenedor y [member Control.clip_contents] está habilitado, esto " "permite mostrar solo el área del contenedor restringida por su propio " "rectángulo delimitador." msgid "Aligns child controls with the beginning (left or top) of the container." msgstr "" "Alinea los controles hijos con el comienzo (izquierdo o superior) del " "contenedor." msgid "Aligns child controls with the center of the container." msgstr "Alinea los controles hijos con el centro del contenedor." msgid "Aligns child controls with the end (right or bottom) of the container." msgstr "" "Alinea los controles hijos con el extremo (derecho o inferior) del contenedor." msgid "" "An implementation of A* for finding the shortest path between two vertices on " "a connected graph in 2D space." msgstr "" "Una implementación de A* para encontrar el camino más corto entre dos " "vértices en un grafo conectado en un espacio 2D." msgid "" "An implementation of the A* algorithm, used to find the shortest path between " "two vertices on a connected graph in 2D space.\n" "See [AStar3D] for a more thorough explanation on how to use this class. " "[AStar2D] is a wrapper for [AStar3D] that enforces 2D coordinates." msgstr "" "Una implementación del algoritmo A*, utilizado para encontrar el camino más " "corto entre dos vértices en un grafo conectado en un espacio 2D.\n" "Véase [AStar3D] para obtener una explicación más detallada sobre cómo usar " "esta clase. [AStar2D] es un envoltorio para [AStar3D] que aplica coordenadas " "2D." msgid "Grid-based Navigation with AStarGrid2D Demo" msgstr "Demo de Navegación basada en cuadrícula con AStarGrid2D" msgid "" "Called when computing the cost between two connected points.\n" "Note that this function is hidden in the default [AStar2D] class." msgstr "" "Llamado al calcular el coste entre dos puntos conectados.\n" "Ten en cuenta que esta función está oculta en la clase [AStar2D] por defecto." msgid "" "Called when estimating the cost between a point and the path's ending point.\n" "Note that this function is hidden in the default [AStar2D] class." msgstr "" "Se llama cuando se calcula el coste entre un punto y punto final de un " "trayecto.\n" "Nota que esta función está oculta en la clase [AStar2D] por defecto." msgid "" "Called when neighboring enters processing and if [member " "neighbor_filter_enabled] is [code]true[/code]. If [code]true[/code] is " "returned the point will not be processed.\n" "Note that this function is hidden in the default [AStar2D] class." msgstr "" "Llamado cuando un vecino entra en el procesamiento y si [member " "neighbor_filter_enabled] es [code]true[/code]. Si se devuelve [code]true[/" "code], el punto no se procesará.\n" "Ten en cuenta que esta función está oculta en la clase [AStar2D] por defecto." msgid "" "Adds a new point at the given position with the given identifier. The [param " "id] must be 0 or larger, and the [param weight_scale] must be 0.0 or " "greater.\n" "The [param weight_scale] is multiplied by the result of [method " "_compute_cost] when determining the overall cost of traveling across a " "segment from a neighboring point to this point. Thus, all else being equal, " "the algorithm prefers points with lower [param weight_scale]s to form a " "path.\n" "[codeblocks]\n" "[gdscript]\n" "var astar = AStar2D.new()\n" "astar.add_point(1, Vector2(1, 0), 4) # Adds the point (1, 0) with " "weight_scale 4 and id 1\n" "[/gdscript]\n" "[csharp]\n" "var astar = new AStar2D();\n" "astar.AddPoint(1, new Vector2(1, 0), 4); // Adds the point (1, 0) with " "weight_scale 4 and id 1\n" "[/csharp]\n" "[/codeblocks]\n" "If there already exists a point for the given [param id], its position and " "weight scale are updated to the given values." msgstr "" "Añade un nuevo punto en la posición dada con el identificador dado. El [param " "id] debe ser 0 o mayor, y el [param weight_scale] debe ser 0.0 o mayor.\n" "El [param weight_scale] se multiplica por el resultado de [method " "_compute_cost] al determinar el costo total de viajar a través de un segmento " "desde un punto vecino hasta este punto. Por lo tanto, si todo lo demás es " "igual, el algoritmo prefiere puntos con [param weight_scale] más bajos para " "formar una ruta.\n" "[codeblocks]\n" "[gdscript]\n" "var astar = AStar2D.new()\n" "astar.add_point(1, Vector2(1, 0), 4) # Adds the point (1, 0) with " "weight_scale 4 and id 1\n" "[/gdscript]\n" "[csharp]\n" "var astar = new AStar2D();\n" "astar.AddPoint(1, new Vector2(1, 0), 4); // Adds the point (1, 0) with " "weight_scale 4 and id 1\n" "[/csharp]\n" "[/codeblocks]\n" "Si ya existe un punto para el [param id] dado, su posición y escala de peso " "se actualizan a los valores dados." msgid "" "Returns whether there is a connection/segment between the given points. If " "[param bidirectional] is [code]false[/code], returns whether movement from " "[param id] to [param to_id] is possible through this segment." msgstr "" "Devuelve si existe una conexión/segmento entre los puntos dados. Si [param " "bidirectional] es [code]false[/code], devuelve si el movimiento desde [param " "id] a [param to_id] es posible a través de este segmento." msgid "Clears all the points and segments." msgstr "Limpia todos los puntos y segmentos." msgid "" "Creates a segment between the given points. If [param bidirectional] is " "[code]false[/code], only movement from [param id] to [param to_id] is " "allowed, not the reverse direction.\n" "[codeblocks]\n" "[gdscript]\n" "var astar = AStar2D.new()\n" "astar.add_point(1, Vector2(1, 1))\n" "astar.add_point(2, Vector2(0, 5))\n" "astar.connect_points(1, 2, false)\n" "[/gdscript]\n" "[csharp]\n" "var astar = new AStar2D();\n" "astar.AddPoint(1, new Vector2(1, 1));\n" "astar.AddPoint(2, new Vector2(0, 5));\n" "astar.ConnectPoints(1, 2, false);\n" "[/csharp]\n" "[/codeblocks]" msgstr "" "Crea un segmento entre los puntos dados. Si [param bidirectional] es " "[code]false[/code], solo se permite el movimiento desde [param id] hacia " "[param to_id], no en la dirección inversa.\n" "[codeblocks]\n" "[gdscript]\n" "var astar = AStar2D.new()\n" "astar.add_point(1, Vector2(1, 1))\n" "astar.add_point(2, Vector2(0, 5))\n" "astar.connect_points(1, 2, false)\n" "[/gdscript]\n" "[csharp]\n" "var astar = new AStar2D();\n" "astar.AddPoint(1, new Vector2(1, 1));\n" "astar.AddPoint(2, new Vector2(0, 5));\n" "astar.ConnectPoints(1, 2, false);\n" "[/csharp]\n" "[/codeblocks]" msgid "" "Deletes the segment between the given points. If [param bidirectional] is " "[code]false[/code], only movement from [param id] to [param to_id] is " "prevented, and a unidirectional segment possibly remains." msgstr "" "Elimina el segmento entre los puntos dados. Si [param bidirectional] es " "[code]false[/code], solo el movimiento desde [param id] a [param to_id] se " "impide, y un segmento unidireccional posiblemente permanece." msgid "Returns the next available point ID with no point associated to it." msgstr "" "Devuelve el punto de Ide proximo disponible con ningun punto asociado a el." msgid "" "Returns the ID of the closest point to [param to_position], optionally taking " "disabled points into account. Returns [code]-1[/code] if there are no points " "in the points pool.\n" "[b]Note:[/b] If several points are the closest to [param to_position], the " "one with the smallest ID will be returned, ensuring a deterministic result." msgstr "" "Devuelve el ID del punto más cercano a [param to_position], opcionalmente " "teniendo en cuenta los puntos desactivados. Devuelve [code]-1[/code] si no " "hay puntos en el grupo de puntos.\n" "[b]Nota:[/b] Si varios puntos son los más cercanos a [param to_position], se " "devolverá el que tenga el ID más pequeño, lo que garantiza un resultado " "determinista." msgid "" "Returns the closest position to [param to_position] that resides inside a " "segment between two connected points.\n" "[codeblocks]\n" "[gdscript]\n" "var astar = AStar2D.new()\n" "astar.add_point(1, Vector2(0, 0))\n" "astar.add_point(2, Vector2(0, 5))\n" "astar.connect_points(1, 2)\n" "var res = astar.get_closest_position_in_segment(Vector2(3, 3)) # Returns (0, " "3)\n" "[/gdscript]\n" "[csharp]\n" "var astar = new AStar2D();\n" "astar.AddPoint(1, new Vector2(0, 0));\n" "astar.AddPoint(2, new Vector2(0, 5));\n" "astar.ConnectPoints(1, 2);\n" "Vector2 res = astar.GetClosestPositionInSegment(new Vector2(3, 3)); // " "Returns (0, 3)\n" "[/csharp]\n" "[/codeblocks]\n" "The result is in the segment that goes from [code]y = 0[/code] to [code]y = " "5[/code]. It's the closest position in the segment to the given point." msgstr "" "Devuelve la posición más cercana a [param to_position] que reside dentro de " "un segmento entre dos puntos conectados.\n" "[codeblocks]\n" "[gdscript]\n" "var astar = AStar2D.new()\n" "astar.add_point(1, Vector2(0, 0))\n" "astar.add_point(2, Vector2(0, 5))\n" "astar.connect_points(1, 2)\n" "var res = astar.get_closest_position_in_segment(Vector2(3, 3)) # Returns (0, " "3)\n" "[/gdscript]\n" "[csharp]\n" "var astar = new AStar2D();\n" "astar.AddPoint(1, new Vector2(0, 0));\n" "astar.AddPoint(2, new Vector2(0, 5));\n" "astar.ConnectPoints(1, 2);\n" "Vector2 res = astar.GetClosestPositionInSegment(new Vector2(3, 3)); // " "Returns (0, 3)\n" "[/csharp]\n" "[/codeblocks]\n" "El resultado está en el segmento que va desde [code]y = 0[/code] hasta " "[code]y = 5[/code]. Es la posición más cercana en el segmento al punto dado." msgid "" "Returns an array with the IDs of the points that form the path found by " "AStar2D between the given points. The array is ordered from the starting " "point to the ending point of the path.\n" "If [param from_id] point is disabled, returns an empty array (even if " "[code]from_id == to_id[/code]).\n" "If [param from_id] point is not disabled, there is no valid path to the " "target, and [param allow_partial_path] is [code]true[/code], returns a path " "to the point closest to the target that can be reached.\n" "[b]Note:[/b] When [param allow_partial_path] is [code]true[/code] and [param " "to_id] is disabled the search may take an unusually long time to finish.\n" "[codeblocks]\n" "[gdscript]\n" "var astar = AStar2D.new()\n" "astar.add_point(1, Vector2(0, 0))\n" "astar.add_point(2, Vector2(0, 1), 1) # Default weight is 1\n" "astar.add_point(3, Vector2(1, 1))\n" "astar.add_point(4, Vector2(2, 0))\n" "\n" "astar.connect_points(1, 2, false)\n" "astar.connect_points(2, 3, false)\n" "astar.connect_points(4, 3, false)\n" "astar.connect_points(1, 4, false)\n" "\n" "var res = astar.get_id_path(1, 3) # Returns [1, 2, 3]\n" "[/gdscript]\n" "[csharp]\n" "var astar = new AStar2D();\n" "astar.AddPoint(1, new Vector2(0, 0));\n" "astar.AddPoint(2, new Vector2(0, 1), 1); // Default weight is 1\n" "astar.AddPoint(3, new Vector2(1, 1));\n" "astar.AddPoint(4, new Vector2(2, 0));\n" "\n" "astar.ConnectPoints(1, 2, false);\n" "astar.ConnectPoints(2, 3, false);\n" "astar.ConnectPoints(4, 3, false);\n" "astar.ConnectPoints(1, 4, false);\n" "long[] res = astar.GetIdPath(1, 3); // Returns [1, 2, 3]\n" "[/csharp]\n" "[/codeblocks]\n" "If you change the 2nd point's weight to 3, then the result will be [code][1, " "4, 3][/code] instead, because now even though the distance is longer, it's " "\"easier\" to get through point 4 than through point 2." msgstr "" "Devuelve un array con los IDs de los puntos que forman la ruta encontrada por " "AStar2D entre los puntos dados. El array está ordenado desde el punto de " "inicio hasta el punto final de la ruta.\n" "Si el punto [param from_id] está desactivado, devuelve un array vacío " "(incluso si [code]from_id == to_id[/code]).\n" "Si el punto [param from_id] no está desactivado, no hay una ruta válida al " "objetivo y [param allow_partial_path] es [code]true[/code], devuelve una ruta " "al punto más cercano al objetivo que se puede alcanzar.\n" "[b]Nota:[/b] Cuando [param allow_partial_path] es [code]true[/code] y [param " "to_id] está desactivado, la búsqueda puede tardar un tiempo inusualmente " "largo en finalizar.\n" "[codeblocks]\n" "[gdscript]\n" "var astar = AStar2D.new()\n" "astar.add_point(1, Vector2(0, 0))\n" "astar.add_point(2, Vector2(0, 1), 1) # Default weight is 1\n" "astar.add_point(3, Vector2(1, 1))\n" "astar.add_point(4, Vector2(2, 0))\n" "\n" "astar.connect_points(1, 2, false)\n" "astar.connect_points(2, 3, false)\n" "astar.connect_points(4, 3, false)\n" "astar.connect_points(1, 4, false)\n" "\n" "var res = astar.get_id_path(1, 3) # Returns [1, 2, 3]\n" "[/gdscript]\n" "[csharp]\n" "var astar = new AStar2D();\n" "astar.AddPoint(1, new Vector2(0, 0));\n" "astar.AddPoint(2, new Vector2(0, 1), 1); // Default weight is 1\n" "astar.AddPoint(3, new Vector2(1, 1));\n" "astar.AddPoint(4, new Vector2(2, 0));\n" "\n" "astar.ConnectPoints(1, 2, false);\n" "astar.ConnectPoints(2, 3, false);\n" "astar.ConnectPoints(4, 3, false);\n" "astar.ConnectPoints(1, 4, false);\n" "long[] res = astar.GetIdPath(1, 3); // Returns [1, 2, 3]\n" "[/csharp]\n" "[/codeblocks]\n" "Si cambias el peso del segundo punto a 3, entonces el resultado será [code]" "[1, 4, 3][/code] en su lugar, porque ahora, aunque la distancia es mayor, es " "\"más fácil\" pasar por el punto 4 que por el punto 2." msgid "" "Returns the capacity of the structure backing the points, useful in " "conjunction with [method reserve_space]." msgstr "" "Devuelve la capacidad de la estructura que respalda los puntos, útil en " "conjunto con [method reserve_space]." msgid "" "Returns an array with the IDs of the points that form the connection with the " "given point.\n" "[codeblocks]\n" "[gdscript]\n" "var astar = AStar2D.new()\n" "astar.add_point(1, Vector2(0, 0))\n" "astar.add_point(2, Vector2(0, 1))\n" "astar.add_point(3, Vector2(1, 1))\n" "astar.add_point(4, Vector2(2, 0))\n" "\n" "astar.connect_points(1, 2, true)\n" "astar.connect_points(1, 3, true)\n" "\n" "var neighbors = astar.get_point_connections(1) # Returns [2, 3]\n" "[/gdscript]\n" "[csharp]\n" "var astar = new AStar2D();\n" "astar.AddPoint(1, new Vector2(0, 0));\n" "astar.AddPoint(2, new Vector2(0, 1));\n" "astar.AddPoint(3, new Vector2(1, 1));\n" "astar.AddPoint(4, new Vector2(2, 0));\n" "\n" "astar.ConnectPoints(1, 2, true);\n" "astar.ConnectPoints(1, 3, true);\n" "\n" "long[] neighbors = astar.GetPointConnections(1); // Returns [2, 3]\n" "[/csharp]\n" "[/codeblocks]" msgstr "" "Devuelve un array con los IDs de los puntos que forman la conexión con el " "punto dado.\n" "[codeblocks]\n" "[gdscript]\n" "var astar = AStar2D.new()\n" "astar.add_point(1, Vector2(0, 0))\n" "astar.add_point(2, Vector2(0, 1))\n" "astar.add_point(3, Vector2(1, 1))\n" "astar.add_point(4, Vector2(2, 0))\n" "\n" "astar.connect_points(1, 2, true)\n" "astar.connect_points(1, 3, true)\n" "\n" "var neighbors = astar.get_point_connections(1) # Returns [2, 3]\n" "[/gdscript]\n" "[csharp]\n" "var astar = new AStar2D();\n" "astar.AddPoint(1, new Vector2(0, 0));\n" "astar.AddPoint(2, new Vector2(0, 1));\n" "astar.AddPoint(3, new Vector2(1, 1));\n" "astar.AddPoint(4, new Vector2(2, 0));\n" "\n" "astar.ConnectPoints(1, 2, true);\n" "astar.ConnectPoints(1, 3, true);\n" "\n" "long[] neighbors = astar.GetPointConnections(1); // Returns [2, 3]\n" "[/csharp]\n" "[/codeblocks]" msgid "Returns the number of points currently in the points pool." msgstr "Devuelve el número de puntos actualmente en el grupo(pool) de puntos." msgid "Returns an array of all point IDs." msgstr "Devuelve un array de todos los ID de los puntos." msgid "" "Returns an array with the points that are in the path found by AStar2D " "between the given points. The array is ordered from the starting point to the " "ending point of the path.\n" "If [param from_id] point is disabled, returns an empty array (even if " "[code]from_id == to_id[/code]).\n" "If [param from_id] point is not disabled, there is no valid path to the " "target, and [param allow_partial_path] is [code]true[/code], returns a path " "to the point closest to the target that can be reached.\n" "[b]Note:[/b] This method is not thread-safe; it can only be used from a " "single [Thread] at a given time. Consider using [Mutex] to ensure exclusive " "access to one thread to avoid race conditions.\n" "Additionally, when [param allow_partial_path] is [code]true[/code] and [param " "to_id] is disabled the search may take an unusually long time to finish." msgstr "" "Devuelve un array con los puntos que están en la ruta encontrada por AStar2D " "entre los puntos dados. El array está ordenado desde el punto de inicio hasta " "el punto final de la ruta.\n" "Si el punto [param from_id] está desactivado, devuelve un array vacío " "(incluso si [code]from_id == to_id[/code]).\n" "Si el punto [param from_id] no está desactivado, no hay una ruta válida al " "objetivo y [param allow_partial_path] es [code]true[/code], devuelve una ruta " "al punto más cercano al objetivo que se puede alcanzar.\n" "[b]Nota:[/b] Este método no es seguro para hilos; solo puede usarse desde un " "único [Thread] a la vez. Considera usar [Mutex] para asegurar el acceso " "exclusivo de un hilo y evitar condiciones de carrera.\n" "Adicionalmente, cuando [param allow_partial_path] es [code]true[/code] y " "[param to_id] está desactivado, la búsqueda puede tardar un tiempo " "inusualmente largo en finalizar." msgid "Returns the position of the point associated with the given [param id]." msgstr "Devuelve la posición del punto asociado con el [param id] dado." msgid "" "Returns the weight scale of the point associated with the given [param id]." msgstr "Devuelve la escala de peso del punto asociado con el [param id] dado." msgid "Returns whether a point associated with the given [param id] exists." msgstr "Devuelve si existe un punto asociado con el [param id] dado." msgid "" "Returns whether a point is disabled or not for pathfinding. By default, all " "points are enabled." msgstr "" "Devuelve si un punto esta deshabilitado or no para el buscador de rutas. Por " "defecto, todos los puntos estan habilitados." msgid "" "Removes the point associated with the given [param id] from the points pool." msgstr "Elimina el punto asociado con el [param id] dado del grupo de puntos." msgid "" "Reserves space internally for [param num_nodes] points. Useful if you're " "adding a known large number of points at once, such as points on a grid." msgstr "" "Reserva espacio internamente para [param num_nodes] puntos. Útil si vas a " "añadir un número grande conocido de puntos a la vez, como puntos en una " "cuadrícula." msgid "" "Disables or enables the specified point for pathfinding. Useful for making a " "temporary obstacle." msgstr "" "Deshabilita o habilita el punto especificado para el buscador de rutas. Util " "para crear obstaculos temporales." msgid "Sets the [param position] for the point with the given [param id]." msgstr "Establece la [param position] para el punto con el [param id] dado." msgid "" "Sets the [param weight_scale] for the point with the given [param id]. The " "[param weight_scale] is multiplied by the result of [method _compute_cost] " "when determining the overall cost of traveling across a segment from a " "neighboring point to this point." msgstr "" "Establece el [param weight_scale] para el punto con el [param id] dado. El " "[param weight_scale] se multiplica por el resultado de [method _compute_cost] " "al determinar el coste total de viajar a través de un segmento desde un punto " "vecino a este punto." msgid "" "If [code]true[/code] enables the filtering of neighbors via [method " "_filter_neighbor]." msgstr "" "Si es [code]true[/code], habilita el filtrado de vecinos a través de [method " "_filter_neighbor]." msgid "" "An implementation of A* for finding the shortest path between two vertices on " "a connected graph in 3D space." msgstr "" "Una implementación de A* para encontrar el camino más corto entre dos " "vértices en un grafo conectado en un espacio 3D." msgid "" "A* (A star) is a computer algorithm used in pathfinding and graph traversal, " "the process of plotting short paths among vertices (points), passing through " "a given set of edges (segments). It enjoys widespread use due to its " "performance and accuracy. Godot's A* implementation uses points in 3D space " "and Euclidean distances by default.\n" "You must add points manually with [method add_point] and create segments " "manually with [method connect_points]. Once done, you can test if there is a " "path between two points with the [method are_points_connected] function, get " "a path containing indices by [method get_id_path], or one containing actual " "coordinates with [method get_point_path].\n" "It is also possible to use non-Euclidean distances. To do so, create a script " "that extends [AStar3D] and override the methods [method _compute_cost] and " "[method _estimate_cost]. Both should take two point IDs and return the " "distance between the corresponding points.\n" "[b]Example:[/b] Use Manhattan distance instead of Euclidean distance:\n" "[codeblocks]\n" "[gdscript]\n" "class_name MyAStar3D\n" "extends AStar3D\n" "\n" "func _compute_cost(u, v):\n" "\tvar u_pos = get_point_position(u)\n" "\tvar v_pos = get_point_position(v)\n" "\treturn abs(u_pos.x - v_pos.x) + abs(u_pos.y - v_pos.y) + abs(u_pos.z - " "v_pos.z)\n" "\n" "func _estimate_cost(u, v):\n" "\tvar u_pos = get_point_position(u)\n" "\tvar v_pos = get_point_position(v)\n" "\treturn abs(u_pos.x - v_pos.x) + abs(u_pos.y - v_pos.y) + abs(u_pos.z - " "v_pos.z)\n" "[/gdscript]\n" "[csharp]\n" "using Godot;\n" "\n" "[GlobalClass]\n" "public partial class MyAStar3D : AStar3D\n" "{\n" "\tpublic override float _ComputeCost(long fromId, long toId)\n" "\t{\n" "\t\tVector3 fromPoint = GetPointPosition(fromId);\n" "\t\tVector3 toPoint = GetPointPosition(toId);\n" "\n" "\t\treturn Mathf.Abs(fromPoint.X - toPoint.X) + Mathf.Abs(fromPoint.Y - " "toPoint.Y) + Mathf.Abs(fromPoint.Z - toPoint.Z);\n" "\t}\n" "\n" "\tpublic override float _EstimateCost(long fromId, long toId)\n" "\t{\n" "\t\tVector3 fromPoint = GetPointPosition(fromId);\n" "\t\tVector3 toPoint = GetPointPosition(toId);\n" "\t\treturn Mathf.Abs(fromPoint.X - toPoint.X) + Mathf.Abs(fromPoint.Y - " "toPoint.Y) + Mathf.Abs(fromPoint.Z - toPoint.Z);\n" "\t}\n" "}\n" "[/csharp]\n" "[/codeblocks]\n" "[method _estimate_cost] should return a lower bound of the distance, i.e. " "[code]_estimate_cost(u, v) <= _compute_cost(u, v)[/code]. This serves as a " "hint to the algorithm because the custom [method _compute_cost] might be " "computation-heavy. If this is not the case, make [method _estimate_cost] " "return the same value as [method _compute_cost] to provide the algorithm with " "the most accurate information.\n" "If the default [method _estimate_cost] and [method _compute_cost] methods are " "used, or if the supplied [method _estimate_cost] method returns a lower bound " "of the cost, then the paths returned by A* will be the lowest-cost paths. " "Here, the cost of a path equals the sum of the [method _compute_cost] results " "of all segments in the path multiplied by the [code]weight_scale[/code]s of " "the endpoints of the respective segments. If the default methods are used and " "the [code]weight_scale[/code]s of all points are set to [code]1.0[/code], " "then this equals the sum of Euclidean distances of all segments in the path." msgstr "" "A* (A Star) es un algoritmo informático utilizado en la búsqueda de rutas y " "el recorrido de grafos, el proceso de trazar rutas cortas entre vértices " "(puntos), pasando por un conjunto dado de aristas (segmentos). Goza de un uso " "generalizado debido a su rendimiento y precisión. La implementación de A* de " "Godot utiliza puntos en el espacio 3D y distancias euclidianas por defecto.\n" "Debes añadir puntos manualmente con [method add_point] y crear segmentos " "manualmente con [method connect_points]. Una vez hecho, puedes comprobar si " "hay una ruta entre dos puntos con la función [method are_points_connected], " "obtener una ruta que contenga índices con [method get_id_path], o una que " "contenga coordenadas reales con [method get_point_path].\n" "También es posible utilizar distancias no euclidianas. Para ello, crea un " "script que extienda [AStar3D] y sobrescribe los métodos [method " "_compute_cost] y [method _estimate_cost]. Ambos deben tomar dos ID de puntos " "y devolver la distancia entre los puntos correspondientes.\n" "[b]Ejemplo:[/b] Usa la distancia Manhattan en lugar de la distancia " "euclidiana:\n" "[codeblocks]\n" "[gdscript]\n" "class_name MyAStar3D\n" "extends AStar3D\n" "\n" "func _compute_cost(u, v):\n" "\tvar u_pos = get_point_position(u)\n" "\tvar v_pos = get_point_position(v)\n" "\treturn abs(u_pos.x - v_pos.x) + abs(u_pos.y - v_pos.y) + abs(u_pos.z - " "v_pos.z)\n" "\n" "func _estimate_cost(u, v):\n" "\tvar u_pos = get_point_position(u)\n" "\tvar v_pos = get_point_position(v)\n" "\treturn abs(u_pos.x - v_pos.x) + abs(u_pos.y - v_pos.y) + abs(u_pos.z - " "v_pos.z)\n" "[/gdscript]\n" "[csharp]\n" "using Godot;\n" "\n" "[GlobalClass]\n" "public partial class MyAStar3D : AStar3D\n" "{\n" "\tpublic override float _ComputeCost(long fromId, long toId)\n" "\t{\n" "\t\tVector3 fromPoint = GetPointPosition(fromId);\n" "\t\tVector3 toPoint = GetPointPosition(toId);\n" "\n" "\t\treturn Mathf.Abs(fromPoint.X - toPoint.X) + Mathf.Abs(fromPoint.Y - " "toPoint.Y) + Mathf.Abs(fromPoint.Z - toPoint.Z);\n" "\t}\n" "\n" "\tpublic override float _EstimateCost(long fromId, long toId)\n" "\t{\n" "\t\tVector3 fromPoint = GetPointPosition(fromId);\n" "\t\tVector3 toPoint = GetPointPosition(toId);\n" "\t\treturn Mathf.Abs(fromPoint.X - toPoint.X) + Mathf.Abs(fromPoint.Y - " "toPoint.Y) + Mathf.Abs(fromPoint.Z - toPoint.Z);\n" "\t}\n" "}\n" "[/csharp]\n" "[/codeblocks]\n" "[method _estimate_cost] debería devolver un límite inferior de la distancia, " "es decir, [code]_estimate_cost(u, v) <= _compute_cost(u, v)[/code]. Esto " "sirve como una pista para el algoritmo porque el [method _compute_cost] " "personalizado podría ser computacionalmente pesado. Si este no es el caso, " "haz que [method _estimate_cost] devuelva el mismo valor que [method " "_compute_cost] para proporcionar al algoritmo la información más precisa.\n" "Si se utilizan los métodos predeterminados [method _estimate_cost] y [method " "_compute_cost], o si el método [method _estimate_cost] proporcionado devuelve " "un límite inferior del costo, entonces las rutas devueltas por A* serán las " "rutas de menor costo. Aquí, el costo de una ruta es igual a la suma de los " "resultados de [method _compute_cost] de todos los segmentos en la ruta " "multiplicada por las [code]weight_scale[/code]s de los puntos finales de los " "segmentos respectivos. Si se utilizan los métodos predeterminados y las " "[code]weight_scale[/code]s de todos los puntos se establecen en [code]1.0[/" "code], entonces esto es igual a la suma de las distancias euclidianas de " "todos los segmentos en la ruta." msgid "" "Called when computing the cost between two connected points.\n" "Note that this function is hidden in the default [AStar3D] class." msgstr "" "Se llama al calcular el coste entre dos puntos conectados.\n" "Ten en cuenta que esta función está oculta en la clase [AStar3D] " "predeterminada." msgid "" "Called when estimating the cost between a point and the path's ending point.\n" "Note that this function is hidden in the default [AStar3D] class." msgstr "" "Se llama al estimar el coste entre un punto y el punto final del camino.\n" "Ten en cuenta que esta función está oculta en la clase [AStar3D] " "predeterminada." msgid "" "Called when neighboring point enters processing and if [member " "neighbor_filter_enabled] is [code]true[/code]. If [code]true[/code] is " "returned the point will not be processed.\n" "Note that this function is hidden in the default [AStar3D] class." msgstr "" "Se llama cuando un punto vecino entra en el procesamiento y si [member " "neighbor_filter_enabled] es [code]true[/code]. Si se devuelve [code]true[/" "code], el punto no se procesará.\n" "Ten en cuenta que esta función está oculta en la clase [AStar3D] " "predeterminada." msgid "" "Adds a new point at the given position with the given identifier. The [param " "id] must be 0 or larger, and the [param weight_scale] must be 0.0 or " "greater.\n" "The [param weight_scale] is multiplied by the result of [method " "_compute_cost] when determining the overall cost of traveling across a " "segment from a neighboring point to this point. Thus, all else being equal, " "the algorithm prefers points with lower [param weight_scale]s to form a " "path.\n" "[codeblocks]\n" "[gdscript]\n" "var astar = AStar3D.new()\n" "astar.add_point(1, Vector3(1, 0, 0), 4) # Adds the point (1, 0, 0) with " "weight_scale 4 and id 1\n" "[/gdscript]\n" "[csharp]\n" "var astar = new AStar3D();\n" "astar.AddPoint(1, new Vector3(1, 0, 0), 4); // Adds the point (1, 0, 0) with " "weight_scale 4 and id 1\n" "[/csharp]\n" "[/codeblocks]\n" "If there already exists a point for the given [param id], its position and " "weight scale are updated to the given values." msgstr "" "Añade un nuevo punto en la posición dada con el identificador dado. El [param " "id] debe ser 0 o mayor, y el [param weight_scale] debe ser 0.0 o mayor.\n" "El [param weight_scale] se multiplica por el resultado de [method " "_compute_cost] al determinar el coste total de viajar a través de un segmento " "desde un punto vecino a este punto. Por lo tanto, en igualdad de condiciones, " "el algoritmo prefiere los puntos con [param weight_scale]s más bajos para " "formar un camino.\n" "[codeblocks]\n" "[gdscript]\n" "var astar = AStar3D.new()\n" "astar.add_point(1, Vector3(1, 0, 0), 4) # Añade el punto (1, 0, 0) con " "weight_scale 4 e id 1\n" "[/gdscript]\n" "[csharp]\n" "var astar = new AStar3D();\n" "astar.AddPoint(1, new Vector3(1, 0, 0), 4); // Añade el punto (1, 0, 0) con " "weight_scale 4 e id 1\n" "[/csharp]\n" "[/codeblocks]\n" "Si ya existe un punto para el [param id] dado, su posición y escala de peso " "se actualizan a los valores dados." msgid "" "Returns whether the two given points are directly connected by a segment. If " "[param bidirectional] is [code]false[/code], returns whether movement from " "[param id] to [param to_id] is possible through this segment." msgstr "" "Devuelve si los dos puntos dados están directamente conectados por un " "segmento. Si [param bidirectional] es [code]false[/code], devuelve si el " "movimiento desde [param id] a [param to_id] es posible a través de este " "segmento." msgid "" "Creates a segment between the given points. If [param bidirectional] is " "[code]false[/code], only movement from [param id] to [param to_id] is " "allowed, not the reverse direction.\n" "[codeblocks]\n" "[gdscript]\n" "var astar = AStar3D.new()\n" "astar.add_point(1, Vector3(1, 1, 0))\n" "astar.add_point(2, Vector3(0, 5, 0))\n" "astar.connect_points(1, 2, false)\n" "[/gdscript]\n" "[csharp]\n" "var astar = new AStar3D();\n" "astar.AddPoint(1, new Vector3(1, 1, 0));\n" "astar.AddPoint(2, new Vector3(0, 5, 0));\n" "astar.ConnectPoints(1, 2, false);\n" "[/csharp]\n" "[/codeblocks]" msgstr "" "Crea un segmento entre los puntos dados. Si [param bidirectional] es " "[code]false[/code], solo el movimiento desde [param id] hasta [param to_id] " "está permitido, no en la dirección inversa.\n" "[codeblocks]\n" "[gdscript]\n" "var astar = AStar3D.new()\n" "astar.add_point(1, Vector3(1, 1, 0))\n" "astar.add_point(2, Vector3(0, 5, 0))\n" "astar.connect_points(1, 2, false)\n" "[/gdscript]\n" "[csharp]\n" "var astar = new AStar3D();\n" "astar.AddPoint(1, new Vector3(1, 1, 0));\n" "astar.AddPoint(2, new Vector3(0, 5, 0));\n" "astar.ConnectPoints(1, 2, false);\n" "[/csharp]\n" "[/codeblocks]" msgid "" "Returns the closest position to [param to_position] that resides inside a " "segment between two connected points.\n" "[codeblocks]\n" "[gdscript]\n" "var astar = AStar3D.new()\n" "astar.add_point(1, Vector3(0, 0, 0))\n" "astar.add_point(2, Vector3(0, 5, 0))\n" "astar.connect_points(1, 2)\n" "var res = astar.get_closest_position_in_segment(Vector3(3, 3, 0)) # Returns " "(0, 3, 0)\n" "[/gdscript]\n" "[csharp]\n" "var astar = new AStar3D();\n" "astar.AddPoint(1, new Vector3(0, 0, 0));\n" "astar.AddPoint(2, new Vector3(0, 5, 0));\n" "astar.ConnectPoints(1, 2);\n" "Vector3 res = astar.GetClosestPositionInSegment(new Vector3(3, 3, 0)); // " "Returns (0, 3, 0)\n" "[/csharp]\n" "[/codeblocks]\n" "The result is in the segment that goes from [code]y = 0[/code] to [code]y = " "5[/code]. It's the closest position in the segment to the given point." msgstr "" "Devuelve la posición más cercana a [param to_position] que reside dentro de " "un segmento entre dos puntos conectados.\n" "[codeblocks]\n" "[gdscript]\n" "var astar = AStar3D.new()\n" "astar.add_point(1, Vector3(0, 0, 0))\n" "astar.add_point(2, Vector3(0, 5, 0))\n" "astar.connect_points(1, 2)\n" "var res = astar.get_closest_position_in_segment(Vector3(3, 3, 0)) # Devuelve " "(0, 3, 0)\n" "[/gdscript]\n" "[csharp]\n" "var astar = new AStar3D();\n" "astar.AddPoint(1, new Vector3(0, 0, 0));\n" "astar.AddPoint(2, new Vector3(0, 5, 0));\n" "astar.ConnectPoints(1, 2);\n" "Vector3 res = astar.GetClosestPositionInSegment(new Vector3(3, 3, 0)); // " "Devuelve (0, 3, 0)\n" "[/csharp]\n" "[/codeblocks]\n" "El resultado está en el segmento que va desde [code]y = 0[/code] hasta " "[code]y = 5[/code]. Es la posición más cercana en el segmento al punto dado." msgid "" "Returns an array with the IDs of the points that form the path found by " "AStar3D between the given points. The array is ordered from the starting " "point to the ending point of the path.\n" "If [param from_id] point is disabled, returns an empty array (even if " "[code]from_id == to_id[/code]).\n" "If [param from_id] point is not disabled, there is no valid path to the " "target, and [param allow_partial_path] is [code]true[/code], returns a path " "to the point closest to the target that can be reached.\n" "[b]Note:[/b] When [param allow_partial_path] is [code]true[/code] and [param " "to_id] is disabled the search may take an unusually long time to finish.\n" "[codeblocks]\n" "[gdscript]\n" "var astar = AStar3D.new()\n" "astar.add_point(1, Vector3(0, 0, 0))\n" "astar.add_point(2, Vector3(0, 1, 0), 1) # Default weight is 1\n" "astar.add_point(3, Vector3(1, 1, 0))\n" "astar.add_point(4, Vector3(2, 0, 0))\n" "\n" "astar.connect_points(1, 2, false)\n" "astar.connect_points(2, 3, false)\n" "astar.connect_points(4, 3, false)\n" "astar.connect_points(1, 4, false)\n" "\n" "var res = astar.get_id_path(1, 3) # Returns [1, 2, 3]\n" "[/gdscript]\n" "[csharp]\n" "var astar = new AStar3D();\n" "astar.AddPoint(1, new Vector3(0, 0, 0));\n" "astar.AddPoint(2, new Vector3(0, 1, 0), 1); // Default weight is 1\n" "astar.AddPoint(3, new Vector3(1, 1, 0));\n" "astar.AddPoint(4, new Vector3(2, 0, 0));\n" "astar.ConnectPoints(1, 2, false);\n" "astar.ConnectPoints(2, 3, false);\n" "astar.ConnectPoints(4, 3, false);\n" "astar.ConnectPoints(1, 4, false);\n" "long[] res = astar.GetIdPath(1, 3); // Returns [1, 2, 3]\n" "[/csharp]\n" "[/codeblocks]\n" "If you change the 2nd point's weight to 3, then the result will be [code][1, " "4, 3][/code] instead, because now even though the distance is longer, it's " "\"easier\" to get through point 4 than through point 2." msgstr "" "Devuelve un array con los IDs de los puntos que forman la ruta encontrada por " "AStar3D entre los puntos dados. El array está ordenado desde el punto de " "inicio hasta el punto final de la ruta.\n" "Si el punto [param from_id] está desactivado, devuelve un array vacío " "(incluso si [code]from_id == to_id[/code]).\n" "Si el punto [param from_id] no está desactivado, no hay una ruta válida al " "objetivo y [param allow_partial_path] es [code]true[/code], devuelve una ruta " "al punto más cercano al objetivo que se puede alcanzar.\n" "[b]Nota:[/b] Cuando [param allow_partial_path] es [code]true[/code] y [param " "to_id] está desactivado, la búsqueda puede tardar un tiempo inusualmente " "largo en finalizar.\n" "[codeblocks]\n" "[gdscript]\n" "var astar = AStar3D.new()\n" "astar.add_point(1, Vector3(0, 0, 0))\n" "astar.add_point(2, Vector3(0, 1, 0), 1) # Default weight is 1\n" "astar.add_point(3, Vector3(1, 1, 0))\n" "astar.add_point(4, Vector3(2, 0, 0))\n" "\n" "astar.connect_points(1, 2, false)\n" "astar.connect_points(2, 3, false)\n" "astar.connect_points(4, 3, false)\n" "astar.connect_points(1, 4, false)\n" "\n" "var res = astar.get_id_path(1, 3) # Returns [1, 2, 3]\n" "[/gdscript]\n" "[csharp]\n" "var astar = new AStar3D();\n" "astar.AddPoint(1, new Vector3(0, 0, 0));\n" "astar.AddPoint(2, new Vector3(0, 1, 0), 1); // Default weight is 1\n" "astar.AddPoint(3, new Vector3(1, 1, 0));\n" "astar.AddPoint(4, new Vector3(2, 0, 0));\n" "astar.ConnectPoints(1, 2, false);\n" "astar.ConnectPoints(2, 3, false);\n" "astar.ConnectPoints(4, 3, false);\n" "astar.ConnectPoints(1, 4, false);\n" "long[] res = astar.GetIdPath(1, 3); // Returns [1, 2, 3]\n" "[/csharp]\n" "[/codeblocks]\n" "Si cambias el peso del segundo punto a 3, entonces el resultado será [code]" "[1, 4, 3][/code] en su lugar, porque ahora, aunque la distancia es mayor, es " "\"más fácil\" pasar por el punto 4 que por el punto 2." msgid "" "Returns an array with the IDs of the points that form the connection with the " "given point.\n" "[codeblocks]\n" "[gdscript]\n" "var astar = AStar3D.new()\n" "astar.add_point(1, Vector3(0, 0, 0))\n" "astar.add_point(2, Vector3(0, 1, 0))\n" "astar.add_point(3, Vector3(1, 1, 0))\n" "astar.add_point(4, Vector3(2, 0, 0))\n" "\n" "astar.connect_points(1, 2, true)\n" "astar.connect_points(1, 3, true)\n" "\n" "var neighbors = astar.get_point_connections(1) # Returns [2, 3]\n" "[/gdscript]\n" "[csharp]\n" "var astar = new AStar3D();\n" "astar.AddPoint(1, new Vector3(0, 0, 0));\n" "astar.AddPoint(2, new Vector3(0, 1, 0));\n" "astar.AddPoint(3, new Vector3(1, 1, 0));\n" "astar.AddPoint(4, new Vector3(2, 0, 0));\n" "astar.ConnectPoints(1, 2, true);\n" "astar.ConnectPoints(1, 3, true);\n" "\n" "long[] neighbors = astar.GetPointConnections(1); // Returns [2, 3]\n" "[/csharp]\n" "[/codeblocks]" msgstr "" "Devuelve un array con los ID de los puntos que forman la conneccion con el " "punto dado.\n" "[codeblocks]\n" "[gdscript]\n" "var astar = AStar3D.new()\n" "astar.add_point(1, Vector3(0, 0, 0))\n" "astar.add_point(2, Vector3(0, 1, 0))\n" "astar.add_point(3, Vector3(1, 1, 0))\n" "astar.add_point(4, Vector3(2, 0, 0))\n" "\n" "astar.connect_points(1, 2, true)\n" "astar.connect_points(1, 3, true)\n" "\n" "var vecinos = astar.get_point_connections(1) # Devuelve [2, 3]\n" "[/gdscript]\n" "[csharp]\n" "var astar = new AStar3D();\n" "astar.AddPoint(1, new Vector3(0, 0, 0));\n" "astar.AddPoint(2, new Vector3(0, 1, 0));\n" "astar.AddPoint(3, new Vector3(1, 1, 0));\n" "astar.AddPoint(4, new Vector3(2, 0, 0));\n" "astar.ConnectPoints(1, 2, true);\n" "astar.ConnectPoints(1, 3, true);\n" "\n" "long[] vecinos = astar.GetPointConnections(1); // Devuelve [2, 3]\n" "[/csharp]\n" "[/codeblocks]" msgid "" "Returns an array with the points that are in the path found by AStar3D " "between the given points. The array is ordered from the starting point to the " "ending point of the path.\n" "If [param from_id] point is disabled, returns an empty array (even if " "[code]from_id == to_id[/code]).\n" "If [param from_id] point is not disabled, there is no valid path to the " "target, and [param allow_partial_path] is [code]true[/code], returns a path " "to the point closest to the target that can be reached.\n" "[b]Note:[/b] This method is not thread-safe; it can only be used from a " "single [Thread] at a given time. Consider using [Mutex] to ensure exclusive " "access to one thread to avoid race conditions.\n" "Additionally, when [param allow_partial_path] is [code]true[/code] and [param " "to_id] is disabled the search may take an unusually long time to finish." msgstr "" "Devuelve un array con los puntos que están en la ruta encontrada por AStar3D " "entre los puntos dados. El array está ordenado desde el punto de inicio hasta " "el punto final de la ruta.\n" "Si el punto [param from_id] está desactivado, devuelve un array vacío " "(incluso si [code]from_id == to_id[/code]).\n" "Si el punto [param from_id] no está desactivado, no hay una ruta válida al " "objetivo y [param allow_partial_path] es [code]true[/code], devuelve una ruta " "al punto más cercano al objetivo que se puede alcanzar.\n" "[b]Nota:[/b] Este método no es seguro para hilos; solo puede usarse desde un " "único [Thread] a la vez. Considera usar [Mutex] para asegurar el acceso " "exclusivo de un hilo y evitar condiciones de carrera.\n" "Adicionalmente, cuando [param allow_partial_path] es [code]true[/code] y " "[param to_id] está desactivado, la búsqueda puede tardar un tiempo " "inusualmente largo en finalizar." msgid "" "An implementation of A* for finding the shortest path between two points on a " "partial 2D grid." msgstr "" "Una implementación de A* para encontrar el camino más corto entre dos puntos " "en una cuadrícula 2D parcial." msgid "" "[AStarGrid2D] is a variant of [AStar2D] that is specialized for partial 2D " "grids. It is simpler to use because it doesn't require you to manually create " "points and connect them together. This class also supports multiple types of " "heuristics, modes for diagonal movement, and a jumping mode to speed up " "calculations.\n" "To use [AStarGrid2D], you only need to set the [member region] of the grid, " "optionally set the [member cell_size], and then call the [method update] " "method:\n" "[codeblocks]\n" "[gdscript]\n" "var astar_grid = AStarGrid2D.new()\n" "astar_grid.region = Rect2i(0, 0, 32, 32)\n" "astar_grid.cell_size = Vector2(16, 16)\n" "astar_grid.update()\n" "print(astar_grid.get_id_path(Vector2i(0, 0), Vector2i(3, 4))) # Prints [(0, " "0), (1, 1), (2, 2), (3, 3), (3, 4)]\n" "print(astar_grid.get_point_path(Vector2i(0, 0), Vector2i(3, 4))) # Prints " "[(0, 0), (16, 16), (32, 32), (48, 48), (48, 64)]\n" "[/gdscript]\n" "[csharp]\n" "AStarGrid2D astarGrid = new AStarGrid2D();\n" "astarGrid.Region = new Rect2I(0, 0, 32, 32);\n" "astarGrid.CellSize = new Vector2I(16, 16);\n" "astarGrid.Update();\n" "GD.Print(astarGrid.GetIdPath(Vector2I.Zero, new Vector2I(3, 4))); // Prints " "[(0, 0), (1, 1), (2, 2), (3, 3), (3, 4)]\n" "GD.Print(astarGrid.GetPointPath(Vector2I.Zero, new Vector2I(3, 4))); // " "Prints [(0, 0), (16, 16), (32, 32), (48, 48), (48, 64)]\n" "[/csharp]\n" "[/codeblocks]\n" "To remove a point from the pathfinding grid, it must be set as \"solid\" with " "[method set_point_solid]." msgstr "" "[AStarGrid2D] es una variante de [AStar2D] que se especializa en cuadrículas " "2D parciales. Es más sencillo de usar porque no requiere que crees " "manualmente los puntos y los conectes. Esta clase también admite múltiples " "tipos de heurísticas, modos para el movimiento diagonal y un modo de salto " "para acelerar los cálculos.\n" "Para usar [AStarGrid2D], solo necesitas establecer la [member region] de la " "cuadrícula, opcionalmente establecer el [member cell_size] y luego llamar al " "método [method update]:\n" "[codeblocks]\n" "[gdscript]\n" "var astar_grid = AStarGrid2D.new()\n" "astar_grid.region = Rect2i(0, 0, 32, 32)\n" "astar_grid.cell_size = Vector2(16, 16)\n" "astar_grid.update()\n" "print(astar_grid.get_id_path(Vector2i(0, 0), Vector2i(3, 4))) # Imprime [(0, " "0), (1, 1), (2, 2), (3, 3), (3, 4)]\n" "print(astar_grid.get_point_path(Vector2i(0, 0), Vector2i(3, 4))) # Imprime " "[(0, 0), (16, 16), (32, 32), (48, 48), (48, 64)]\n" "[/gdscript]\n" "[csharp]\n" "AStarGrid2D astarGrid = new AStarGrid2D();\n" "astarGrid.Region = new Rect2I(0, 0, 32, 32);\n" "astarGrid.CellSize = new Vector2I(16, 16);\n" "astarGrid.Update();\n" "GD.Print(astarGrid.GetIdPath(Vector2I.Zero, new Vector2I(3, 4))); // Imprime " "[(0, 0), (1, 1), (2, 2), (3, 3), (3, 4)]\n" "GD.Print(astarGrid.GetPointPath(Vector2I.Zero, new Vector2I(3, 4))); // " "Imprime [(0, 0), (16, 16), (32, 32), (48, 48), (48, 64)]\n" "[/csharp]\n" "[/codeblocks]\n" "Para eliminar un punto de la cuadrícula de búsqueda de trayectos, debes " "establecerlo como \"sólido\" con [method set_point_solid]." msgid "" "Called when computing the cost between two connected points.\n" "Note that this function is hidden in the default [AStarGrid2D] class." msgstr "" "Llamado al calcular el coste entre dos puntos conectados.\n" "Ten en cuenta que esta función está oculta en la clase [AStarGrid2D] por " "defecto." msgid "" "Called when estimating the cost between a point and the path's ending point.\n" "Note that this function is hidden in the default [AStarGrid2D] class." msgstr "" "Llamado al estimar el coste entre un punto y el punto final del camino.\n" "Ten en cuenta que esta función está oculta en la clase [AStarGrid2D] por " "defecto." msgid "" "Clears the grid and sets the [member region] to [code]Rect2i(0, 0, 0, 0)[/" "code]." msgstr "" "Limpia la cuadrícula y establece [member region] a [code]Rect2i(0, 0, 0, 0)[/" "code]." msgid "" "Fills the given [param region] on the grid with the specified value for the " "solid flag.\n" "[b]Note:[/b] Calling [method update] is not needed after the call of this " "function." msgstr "" "Rellena la [param region] dada en la cuadrícula con el valor especificado " "para la bandera de sólido.\n" "[b]Nota:[/b] No es necesario llamar a [method update] después de la llamada a " "esta función." msgid "" "Fills the given [param region] on the grid with the specified value for the " "weight scale.\n" "[b]Note:[/b] Calling [method update] is not needed after the call of this " "function." msgstr "" "Rellena la [param region] dada en la cuadrícula con el valor especificado " "para la escala de peso.\n" "[b]Nota:[/b] No es necesario llamar a [method update] después de la llamada a " "esta función." msgid "" "Returns an array with the IDs of the points that form the path found by " "AStar2D between the given points. The array is ordered from the starting " "point to the ending point of the path.\n" "If [param from_id] point is disabled, returns an empty array (even if " "[code]from_id == to_id[/code]).\n" "If [param from_id] point is not disabled, there is no valid path to the " "target, and [param allow_partial_path] is [code]true[/code], returns a path " "to the point closest to the target that can be reached.\n" "[b]Note:[/b] When [param allow_partial_path] is [code]true[/code] and [param " "to_id] is solid the search may take an unusually long time to finish." msgstr "" "Devuelve un array con los IDs de los puntos que forman la ruta encontrada por " "AStar2D entre los puntos dados. El array está ordenado desde el punto de " "inicio hasta el punto final de la ruta.\n" "Si el punto [param from_id] está desactivado, devuelve un array vacío " "(incluso si [code]from_id == to_id[/code]).\n" "Si el punto [param from_id] no está desactivado, no hay una ruta válida al " "objetivo y [param allow_partial_path] es [code]true[/code], devuelve una ruta " "al punto más cercano al objetivo que se puede alcanzar.\n" "[b]Nota:[/b] Cuando [param allow_partial_path] es [code]true[/code] y [param " "to_id] es sólido, la búsqueda puede tardar un tiempo inusualmente largo en " "finalizar." msgid "" "Returns an array of dictionaries with point data ([code]id[/code]: " "[Vector2i], [code]position[/code]: [Vector2], [code]solid[/code]: [bool], " "[code]weight_scale[/code]: [float]) within a [param region]." msgstr "" "Devuelve un array de diccionarios con información de los puntos ([code]id[/" "code]: [Vector2i], [code]position[/code]: [Vector2], [code]solid[/code]: " "[bool], [code]weight_scale[/code]: [float]) dentro de una [param region]." msgid "" "Returns an array with the points that are in the path found by [AStarGrid2D] " "between the given points. The array is ordered from the starting point to the " "ending point of the path.\n" "If [param from_id] point is disabled, returns an empty array (even if " "[code]from_id == to_id[/code]).\n" "If [param from_id] point is not disabled, there is no valid path to the " "target, and [param allow_partial_path] is [code]true[/code], returns a path " "to the point closest to the target that can be reached.\n" "[b]Note:[/b] This method is not thread-safe; it can only be used from a " "single [Thread] at a given time. Consider using [Mutex] to ensure exclusive " "access to one thread to avoid race conditions.\n" "Additionally, when [param allow_partial_path] is [code]true[/code] and [param " "to_id] is solid the search may take an unusually long time to finish." msgstr "" "Devuelve un array con los puntos que están en la ruta encontrada por " "[AStarGrid2D] entre los puntos dados. El array está ordenado desde el punto " "de inicio hasta el punto final de la ruta.\n" "Si el punto [param from_id] está desactivado, devuelve un array vacío " "(incluso si [code]from_id == to_id[/code]).\n" "Si el punto [param from_id] no está desactivado, no hay una ruta válida al " "objetivo y [param allow_partial_path] es [code]true[/code], devuelve una ruta " "al punto más cercano al objetivo que se puede alcanzar.\n" "[b]Nota:[/b] Este método no es seguro para hilos; solo puede usarse desde un " "único [Thread] a la vez. Considera usar [Mutex] para asegurar el acceso " "exclusivo de un hilo y evitar condiciones de carrera.\n" "Adicionalmente, cuando [param allow_partial_path] es [code]true[/code] y " "[param to_id] es sólido, la búsqueda puede tardar un tiempo inusualmente " "largo en finalizar." msgid "" "Indicates that the grid parameters were changed and [method update] needs to " "be called." msgstr "" "Indica que los parámetros de la cuadrícula se han cambiado y que es necesario " "llamar a [method update]." msgid "" "Returns [code]true[/code] if the [param x] and [param y] is a valid grid " "coordinate (id), i.e. if it is inside [member region]. Equivalent to " "[code]region.has_point(Vector2i(x, y))[/code]." msgstr "" "Devuelve [code]true[/code] si [param x] e [param y] son coordenadas de " "cuadrícula válidas (id), es decir, si están dentro de [member region]. " "Equivalente a [code]region.has_point(Vector2i(x, y))[/code]." msgid "" "Returns [code]true[/code] if the [param id] vector is a valid grid " "coordinate, i.e. if it is inside [member region]. Equivalent to " "[code]region.has_point(id)[/code]." msgstr "" "Devuelve [code]true[/code] si el vector [param id] es una coordenada de " "cuadrícula válida, es decir, si está dentro de [member region]. Equivalente a " "[code]region.has_point(id)[/code]." msgid "" "Returns [code]true[/code] if a point is disabled for pathfinding. By default, " "all points are enabled." msgstr "" "Devuelve [code]true[/code] si un punto está deshabilitado para la búsqueda de " "trayectos. Por defecto, todos los puntos están habilitados." msgid "" "Disables or enables the specified point for pathfinding. Useful for making an " "obstacle. By default, all points are enabled.\n" "[b]Note:[/b] Calling [method update] is not needed after the call of this " "function." msgstr "" "Deshabilita o habilita el punto especificado para la búsqueda de trayectos. " "Útil para crear un obstáculo. Por defecto, todos los puntos están " "habilitados.\n" "[b]Nota:[/b] No es necesario llamar a [method update] después de llamar a " "esta función." msgid "" "Sets the [param weight_scale] for the point with the given [param id]. The " "[param weight_scale] is multiplied by the result of [method _compute_cost] " "when determining the overall cost of traveling across a segment from a " "neighboring point to this point.\n" "[b]Note:[/b] Calling [method update] is not needed after the call of this " "function." msgstr "" "Establece el [param weight_scale] para el punto con el [param id] dado. El " "[param weight_scale] se multiplica por el resultado de [method _compute_cost] " "al determinar el coste general de viajar a través de un segmento desde un " "punto vecino a este punto.\n" "[b]Nota:[/b] No es necesario llamar a [method update] después de llamar a " "esta función." msgid "" "Updates the internal state of the grid according to the parameters to prepare " "it to search the path. Needs to be called if parameters like [member region], " "[member cell_size] or [member offset] are changed. [method is_dirty] will " "return [code]true[/code] if this is the case and this needs to be called.\n" "[b]Note:[/b] All point data (solidity and weight scale) will be cleared." msgstr "" "Actualiza el estado interno de la cuadrícula de acuerdo con los parámetros " "para prepararla para buscar la ruta. Necesita ser llamado si los parámetros " "como [member region], [member cell_size] o [member offset] cambian. [method " "is_dirty] devolverá [code]true[/code] si este es el caso y esto necesita ser " "llamado.\n" "[b]Nota:[/b] Todos los datos de los puntos (solidez y escala de peso) se " "borrarán." msgid "" "The cell shape. Affects how the positions are placed in the grid. If changed, " "[method update] needs to be called before finding the next path." msgstr "" "La forma de la celda. Afecta a cómo se colocan las posiciones en la " "cuadrícula. Si se cambia, es necesario llamar a [method update] antes de " "encontrar el siguiente trayecto." msgid "" "The size of the point cell which will be applied to calculate the resulting " "point position returned by [method get_point_path]. If changed, [method " "update] needs to be called before finding the next path." msgstr "" "El tamaño de la celda de punto que se aplicará para calcular la posición del " "punto resultante devuelta por [method get_point_path]. Si se cambia, es " "necesario llamar a [method update] antes de encontrar el siguiente trayecto." msgid "" "The default [enum Heuristic] which will be used to calculate the cost between " "two points if [method _compute_cost] was not overridden." msgstr "" "La [enum Heuristic] predeterminada que se utilizará para calcular el coste " "entre dos puntos si [method _compute_cost] no se ha sobreescrito." msgid "" "The default [enum Heuristic] which will be used to calculate the cost between " "the point and the end point if [method _estimate_cost] was not overridden." msgstr "" "La [enum Heuristic] predeterminada que se utilizará para calcular el coste " "entre el punto y el punto final si [method _estimate_cost] no se ha " "sobreescrito." msgid "" "A specific [enum DiagonalMode] mode which will force the path to avoid or " "accept the specified diagonals." msgstr "" "Un modo [enum DiagonalMode] específico que forzará a la ruta a evitar o " "aceptar las diagonales especificadas." msgid "" "Enables or disables jumping to skip up the intermediate points and speeds up " "the searching algorithm.\n" "[b]Note:[/b] Currently, toggling it on disables the consideration of weight " "scaling in pathfinding." msgstr "" "Activa o desactiva el salto para omitir los puntos intermedios y acelera el " "algoritmo de búsqueda.\n" "[b]Nota:[/b] Actualmente, activarlo desactiva la consideración del escalado " "de peso en la búsqueda de trayectos." msgid "" "The offset of the grid which will be applied to calculate the resulting point " "position returned by [method get_point_path]. If changed, [method update] " "needs to be called before finding the next path." msgstr "" "El desplazamiento de la cuadrícula que se aplicará para calcular la posición " "del punto resultante devuelta por [method get_point_path]. Si se cambia, es " "necesario llamar a [method update] antes de encontrar el siguiente trayecto." msgid "" "The region of grid cells available for pathfinding. If changed, [method " "update] needs to be called before finding the next path." msgstr "" "La región de celdas de la cuadrícula disponibles para la búsqueda de " "trayectos. Si se cambia, es necesario llamar a [method update] antes de " "encontrar el siguiente trayecto." msgid "Use [member region] instead." msgstr "Utiliza [member region] en su lugar." msgid "" "The size of the grid (number of cells of size [member cell_size] on each " "axis). If changed, [method update] needs to be called before finding the next " "path." msgstr "" "El tamaño de la cuadrícula (número de celdas de tamaño [member cell_size] en " "cada eje). Si se cambia, es necesario llamar a [method update] antes de " "encontrar el siguiente trayecto." msgid "" "The [url=https://en.wikipedia.org/wiki/Euclidean_distance]Euclidean " "heuristic[/url] to be used for the pathfinding using the following formula:\n" "[codeblock]\n" "dx = abs(to_id.x - from_id.x)\n" "dy = abs(to_id.y - from_id.y)\n" "result = sqrt(dx * dx + dy * dy)\n" "[/codeblock]\n" "[b]Note:[/b] This is also the internal heuristic used in [AStar3D] and " "[AStar2D] by default (with the inclusion of possible z-axis coordinate)." msgstr "" "La [url=https://en.wikipedia.org/wiki/Euclidean_distance]heurística " "euclidiana[/url] que se utilizará para la búsqueda de trayectos utilizando la " "siguiente fórmula:\n" "[codeblock]\n" "dx = abs(to_id.x - from_id.x)\n" "dy = abs(to_id.y - from_id.y)\n" "result = sqrt(dx * dx + dy * dy)\n" "[/codeblock]\n" "[b]Nota:[/b] Esta es también la heurística interna utilizada en [AStar3D] y " "[AStar2D] por defecto (con la inclusión de la posible coordenada del eje z)." msgid "" "The [url=https://en.wikipedia.org/wiki/Taxicab_geometry]Manhattan heuristic[/" "url] to be used for the pathfinding using the following formula:\n" "[codeblock]\n" "dx = abs(to_id.x - from_id.x)\n" "dy = abs(to_id.y - from_id.y)\n" "result = dx + dy\n" "[/codeblock]\n" "[b]Note:[/b] This heuristic is intended to be used with 4-side orthogonal " "movements, provided by setting the [member diagonal_mode] to [constant " "DIAGONAL_MODE_NEVER]." msgstr "" "La [url=https://en.wikipedia.org/wiki/Taxicab_geometry]heurística de " "Manhattan[/url] que se utilizará para la búsqueda de trayectos utilizando la " "siguiente fórmula:\n" "[codeblock]\n" "dx = abs(to_id.x - from_id.x)\n" "dy = abs(to_id.y - from_id.y)\n" "result = dx + dy\n" "[/codeblock]\n" "[b]Nota:[/b] Esta heurística está pensada para ser utilizada con movimientos " "ortogonales de 4 lados, proporcionados estableciendo [member diagonal_mode] a " "[constant DIAGONAL_MODE_NEVER]." msgid "" "The Octile heuristic to be used for the pathfinding using the following " "formula:\n" "[codeblock]\n" "dx = abs(to_id.x - from_id.x)\n" "dy = abs(to_id.y - from_id.y)\n" "f = sqrt(2) - 1\n" "result = (dx < dy) ? f * dx + dy : f * dy + dx;\n" "[/codeblock]" msgstr "" "La heurística Octile que se utilizará para la búsqueda de trayectos utiliza " "la siguiente fórmula:\n" "[codeblock]\n" "dx = abs(to_id.x - from_id.x)\n" "dy = abs(to_id.y - from_id.y)\n" "f = sqrt(2) - 1\n" "result = (dx < dy) ? f * dx + dy : f * dy + dx;\n" "[/codeblock]" msgid "" "The [url=https://en.wikipedia.org/wiki/Chebyshev_distance]Chebyshev " "heuristic[/url] to be used for the pathfinding using the following formula:\n" "[codeblock]\n" "dx = abs(to_id.x - from_id.x)\n" "dy = abs(to_id.y - from_id.y)\n" "result = max(dx, dy)\n" "[/codeblock]" msgstr "" "La [url=https://en.wikipedia.org/wiki/Chebyshev_distance]heurística de " "Chebyshev[/url] que se utilizará para la búsqueda de trayectos utilizando la " "siguiente fórmula:\n" "[codeblock]\n" "dx = abs(to_id.x - from_id.x)\n" "dy = abs(to_id.y - from_id.y)\n" "result = max(dx, dy)\n" "[/codeblock]" msgid "Represents the size of the [enum Heuristic] enum." msgstr "Representa el tamaño del enum [enum Heuristic]." msgid "" "The pathfinding algorithm will ignore solid neighbors around the target cell " "and allow passing using diagonals." msgstr "" "El algoritmo de búsqueda de caminos ignorará los vecinos sólidos alrededor de " "la celda objetivo y permitirá pasar usando diagonales." msgid "" "The pathfinding algorithm will ignore all diagonals and the way will be " "always orthogonal." msgstr "" "El algoritmo de búsqueda de caminos ignorará todas las diagonales y el camino " "siempre será ortogonal." msgid "" "The pathfinding algorithm will avoid using diagonals if at least two " "obstacles have been placed around the neighboring cells of the specific path " "segment." msgstr "" "El algoritmo de búsqueda de caminos evitará el uso de diagonales si se han " "colocado al menos dos obstáculos alrededor de las celdas vecinas del segmento " "de ruta específico." msgid "" "The pathfinding algorithm will avoid using diagonals if any obstacle has been " "placed around the neighboring cells of the specific path segment." msgstr "" "El algoritmo de búsqueda de caminos evitará el uso de diagonales si se ha " "colocado algún obstáculo alrededor de las celdas vecinas del segmento de ruta " "específico." msgid "Represents the size of the [enum DiagonalMode] enum." msgstr "Representa el tamaño del enum [enum DiagonalMode]." msgid "Rectangular cell shape." msgstr "Forma de celda rectangular." msgid "" "Diamond cell shape (for isometric look). Cell coordinates layout where the " "horizontal axis goes up-right, and the vertical one goes down-right." msgstr "" "Forma de celda de diamante (para apariencia isométrica). Diseño de " "coordenadas de celda donde el eje horizontal va hacia arriba a la derecha, y " "el vertical hacia abajo a la derecha." msgid "Represents the size of the [enum CellShape] enum." msgstr "Representa el tamaño del enum [enum CellShape]." msgid "A texture that crops out part of another Texture2D." msgstr "Una textura que recorta parte de otra Texture2D." msgid "" "[Texture2D] resource that draws only part of its [member atlas] texture, as " "defined by the [member region]. An additional [member margin] can also be " "set, which is useful for small adjustments.\n" "Multiple [AtlasTexture] resources can be cropped from the same [member " "atlas]. Packing many smaller textures into a singular large texture helps to " "optimize video memory costs and render calls.\n" "[b]Note:[/b] [AtlasTexture] cannot be used in an [AnimatedTexture], and will " "not tile properly in nodes such as [TextureRect] or [Sprite2D]. To tile an " "[AtlasTexture], modify its [member region] instead." msgstr "" "Recurso [Texture2D] que dibuja solo una parte de su textura [member atlas], " "como se define en [member region]. También se puede establecer un [member " "margin] adicional, lo cual es útil para pequeños ajustes.\n" "Se pueden recortar varios recursos [AtlasTexture] del mismo [member atlas]. " "Empaquetar muchas texturas más pequeñas en una única textura grande ayuda a " "optimizar los costos de memoria de video y las llamadas de renderizado.\n" "[b]Nota:[/b] [AtlasTexture] no se puede usar en una [AnimatedTexture], y no " "se repetirá correctamente en nodos como [TextureRect] o [Sprite2D]. Para " "repetir una [AtlasTexture], modifica su [member region] en su lugar." msgid "" "The texture that contains the atlas. Can be any type inheriting from " "[Texture2D], including another [AtlasTexture]." msgstr "" "La textura que contiene el atlas. Puede ser de cualquier tipo heredado de " "[Texture2D], incluyendo otra [AtlasTexture]." msgid "" "If [code]true[/code], the area outside of the [member region] is clipped to " "avoid bleeding of the surrounding texture pixels." msgstr "" "Si es [code]true[/code], el área fuera de la [member region] se recorta para " "evitar el sangrado de los píxeles de la textura circundante." msgid "" "The margin around the [member region]. Useful for small adjustments. If the " "[member Rect2.size] of this property (\"w\" and \"h\" in the editor) is set, " "the drawn texture is resized to fit within the margin." msgstr "" "El margen alrededor de la [member region]. Útil para pequeños ajustes. Si el " "[member Rect2.size] de esta propiedad (\"w\" y \"h\" en el editor) está " "establecido, la textura dibujada se redimensiona para que quepa dentro del " "margen." msgid "" "The region used to draw the [member atlas]. If either dimension of the " "region's size is [code]0[/code], the value from [member atlas] size will be " "used for that axis instead.\n" "[b]Note:[/b] The image size is always an integer, so the actual region size " "is rounded down." msgstr "" "La región utilizada para dibujar el [member atlas]. Si alguna de las " "dimensiones del tamaño de la región es [code]0[/code], se utilizará el valor " "del tamaño de [member atlas] para ese eje en su lugar.\n" "[b]Nota:[/b] El tamaño de la imagen es siempre un entero, por lo que el " "tamaño real de la región se redondea hacia abajo." msgid "Stores information about the audio buses." msgstr "Almacena informacion sobre los buses de audio." msgid "" "Stores position, muting, solo, bypass, effects, effect position, volume, and " "the connections between buses. See [AudioServer] for usage." msgstr "" "Almacena posicion, muteado, solo, bypass, efectos, posicion de efecto, " "volumen, y las conexiones entre buses. Véase [AudioServer] para su uso." msgid "Base class for audio effect resources." msgstr "Clase base para recursos de efectos de audio." msgid "Audio buses" msgstr "Buses de audio" msgid "Audio effects" msgstr "Efectos de audio" msgid "Audio Microphone Record Demo" msgstr "Demo de Grabación de Audio con Micrófono" msgid "" "Override this method to customize the [AudioEffectInstance] created when this " "effect is applied on a bus in the editor's Audio panel, or through [method " "AudioServer.add_bus_effect].\n" "[codeblock]\n" "extends AudioEffect\n" "\n" "@export var strength = 4.0\n" "\n" "func _instantiate():\n" "\tvar effect = CustomAudioEffectInstance.new()\n" "\teffect.base = self\n" "\n" "\treturn effect\n" "[/codeblock]\n" "[b]Note:[/b] It is recommended to keep a reference to the original " "[AudioEffect] in the new instance. Depending on the implementation this " "allows the effect instance to listen for changes at run-time and be modified " "accordingly." msgstr "" "Sobrescribe este método para personalizar el [AudioEffectInstance] creado " "cuando este efecto se aplica en un bus en el panel de Audio del editor, o a " "través de [method AudioServer.add_bus_effect].\n" "[codeblock]\n" "extends AudioEffect\n" "\n" "@export var strength = 4.0\n" "\n" "func _instantiate():\n" "\tvar effect = CustomAudioEffectInstance.new()\n" "\teffect.base = self\n" "\n" "\treturn effect\n" "[/codeblock]\n" "[b]Nota:[/b] Se recomienda mantener una referencia al [AudioEffect] original " "en la nueva instancia. Dependiendo de la implementación, esto permite que la " "instancia del efecto escuche los cambios en tiempo de ejecución y se " "modifique en consecuencia." msgid "Increases or decreases the volume being routed through the audio bus." msgstr "Aumenta o reduce el volumen que se dirige a traves del bus de audio." msgid "" "Amount of amplification as a linear value.\n" "[b]Note:[/b] This member modifies [member volume_db] for convenience. The " "returned value is equivalent to the result of [method " "@GlobalScope.db_to_linear] on [member volume_db]. Setting this member is " "equivalent to setting [member volume_db] to the result of [method " "@GlobalScope.linear_to_db] on a value." msgstr "" "Cantidad de amplificación como un valor lineal.\n" "[b]Nota:[/b] Este miembro modifica [member volume_db] para conveniencia. El " "valor devuelto es equivalente al resultado de [method " "@GlobalScope.db_to_linear] en [member volume_db]. Establecer este miembro es " "equivalente a establecer [member volume_db] al resultado de [method " "@GlobalScope.linear_to_db] en un valor." msgid "" "Clears the internal ring buffer.\n" "[b]Note:[/b] Calling this during a capture can cause the loss of samples " "which causes popping in the playback." msgstr "" "Borra el búfer circular interno.\n" "[b]Nota:[/b] Llamar a esto durante una captura puede causar la pérdida de " "muestras, lo que provocaría chasquidos en la reproducción." msgid "If [code]true[/code], the first tap will be enabled." msgstr "Si es [code]true[/code], se habilitará el primer toque." msgid "" "High-pass filter, in Hz. Frequencies higher than this value will not be " "affected by the distortion. Value can range from 1 to 20000." msgstr "" "Filtro de paso alto, en Hz. Las frecuencias superiores a este valor no se " "verán afectadas por la distorsión. El valor puede variar entre 1 y " "20.000.Filtro de paso alto, en Hz. Las frecuencias superiores a este valor no " "se verán afectadas por la distorsión. El valor puede variar entre 1 y 20.000." msgid "Returns the number of bands of the equalizer." msgstr "Devuelve el número de bandas del ecualizador." msgid "Returns the band's gain at the specified index, in dB." msgstr "Devuelve la ganancia de la banda en el índice especificado, en dB." msgid "Sets band's gain at the specified index, in dB." msgstr "Establece la ganancia de la banda en el índice especificado, en dB." msgid "" "Frequency bands:\n" "Band 1: 31 Hz\n" "Band 2: 62 Hz\n" "Band 3: 125 Hz\n" "Band 4: 250 Hz\n" "Band 5: 500 Hz\n" "Band 6: 1000 Hz\n" "Band 7: 2000 Hz\n" "Band 8: 4000 Hz\n" "Band 9: 8000 Hz\n" "Band 10: 16000 Hz\n" "See also [AudioEffectEQ], [AudioEffectEQ6], [AudioEffectEQ21]." msgstr "" "Bandas de frecuencia:\n" "Banda 1: 31 Hz\n" "Banda 2: 62 Hz\n" "Banda 3: 125 Hz\n" "Banda 4: 250 Hz\n" "Banda 5: 500 Hz\n" "Banda 6: 1000 Hz\n" "Banda 7: 2000 Hz\n" "Banda 8: 4000 Hz\n" "Banda 9: 8000 Hz\n" "Banda 10: 16000 Hz\n" "Véase también [AudioEffectEQ], [AudioEffectEQ6], [AudioEffectEQ21]." msgid "" "Frequency bands:\n" "Band 1: 22 Hz\n" "Band 2: 32 Hz\n" "Band 3: 44 Hz\n" "Band 4: 63 Hz\n" "Band 5: 90 Hz\n" "Band 6: 125 Hz\n" "Band 7: 175 Hz\n" "Band 8: 250 Hz\n" "Band 9: 350 Hz\n" "Band 10: 500 Hz\n" "Band 11: 700 Hz\n" "Band 12: 1000 Hz\n" "Band 13: 1400 Hz\n" "Band 14: 2000 Hz\n" "Band 15: 2800 Hz\n" "Band 16: 4000 Hz\n" "Band 17: 5600 Hz\n" "Band 18: 8000 Hz\n" "Band 19: 11000 Hz\n" "Band 20: 16000 Hz\n" "Band 21: 22000 Hz\n" "See also [AudioEffectEQ], [AudioEffectEQ6], [AudioEffectEQ10]." msgstr "" "Bandas de frecuencia:\n" "Banda 1: 22 Hz\n" "Banda 2: 32 Hz\n" "Banda 3: 44 Hz\n" "Banda 4: 63 Hz\n" "Banda 5: 90 Hz\n" "Banda 6: 125 Hz\n" "Banda 7: 175 Hz\n" "Banda 8: 250 Hz\n" "Banda 9: 350 Hz\n" "Banda 10: 500 Hz\n" "Banda 11: 700 Hz\n" "Banda 12: 1000 Hz\n" "Banda 13: 1400 Hz\n" "Banda 14: 2000 Hz\n" "Banda 15: 2800 Hz\n" "Banda 16: 4000 Hz\n" "Banda 17: 5600 Hz\n" "Banda 18: 8000 Hz\n" "Banda 19: 11000 Hz\n" "Banda 20: 16000 Hz\n" "Banda 21: 22000 Hz\n" "Véase también [AudioEffectEQ], [AudioEffectEQ6], [AudioEffectEQ10]." msgid "" "Frequency bands:\n" "Band 1: 32 Hz\n" "Band 2: 100 Hz\n" "Band 3: 320 Hz\n" "Band 4: 1000 Hz\n" "Band 5: 3200 Hz\n" "Band 6: 10000 Hz\n" "See also [AudioEffectEQ], [AudioEffectEQ10], [AudioEffectEQ21]." msgstr "" "Bandas de frecuencia:\n" "Banda 1: 32 Hz\n" "Banda 2: 100 Hz\n" "Banda 3: 320 Hz\n" "Banda 4: 1000 Hz\n" "Banda 5: 3200 Hz\n" "Banda 6: 10000 Hz\n" "Véase también [AudioEffectEQ], [AudioEffectEQ10], [AudioEffectEQ21]." msgid "" "Frequency threshold for the filter, in Hz. Value can range from 1 to 20500." msgstr "" "Umbral de frecuencia para el filtro, en Hz. El valor puede oscilar entre 1 y " "20500." msgid "" "Cutting off at 6 dB per octave. One octave is twice the frequency above " "[member cutoff_hz], or half the frequency below [member cutoff_hz]." msgstr "" "Corte a 6 dB por octava. Una octava es el doble de la frecuencia por encima " "de [member cutoff_hz], o la mitad de la frecuencia por debajo de [member " "cutoff_hz]." msgid "" "Cutting off at 12 dB per octave. One octave is twice the frequency above " "[member cutoff_hz], or half the frequency below [member cutoff_hz]." msgstr "" "Corte a 12 dB por octava. Una octava es el doble de la frecuencia por encima " "de [member cutoff_hz], o la mitad de la frecuencia por debajo de [member " "cutoff_hz]." msgid "" "Cutting off at 18 dB per octave. One octave is twice the frequency above " "[member cutoff_hz], or half the frequency below [member cutoff_hz]." msgstr "" "Corte a 18 dB por octava. Una octava es el doble de la frecuencia por encima " "de [member cutoff_hz], o la mitad de la frecuencia por debajo de [member " "cutoff_hz]." msgid "" "Cutting off at 24 dB per octave. One octave is twice the frequency above " "[member cutoff_hz], or half the frequency below [member cutoff_hz]." msgstr "" "Corte a 24 dB por octava. Una octava es el doble de la frecuencia por encima " "de [member cutoff_hz], o la mitad de la frecuencia por debajo de [member " "cutoff_hz]." msgid "Manipulates the audio it receives for a given effect." msgstr "Manipula el audio que recibe para un efecto determinado." msgid "" "An audio effect instance manipulates the audio it receives for a given " "effect. This instance is automatically created by an [AudioEffect] when it is " "added to a bus, and should usually not be created directly. If necessary, it " "can be fetched at run-time with [method AudioServer.get_bus_effect_instance]." msgstr "" "Una instancia de efecto de audio manipula el audio que recibe para un efecto " "determinado. Esta instancia es creada automáticamente por un [AudioEffect] " "cuando se agrega a un bus, y normalmente no debería crearse directamente. Si " "es necesario, se puede obtener en tiempo de ejecución mediante [method " "AudioServer.get_bus_effect_instance]." msgid "" "Called by the [AudioServer] to process this effect. When [method " "_process_silence] is not overridden or it returns [code]false[/code], this " "method is called only when the bus is active.\n" "[b]Note:[/b] It is not useful to override this method in GDScript or C#. Only " "GDExtension can take advantage of it." msgstr "" "Llamado por el [AudioServer] para procesar este efecto. Cuando [method " "_process_silence] no se sobrescribe o devuelve [code]false[/code], este " "método se llama únicamente cuando el bus está activo.\n" "[b]Nota:[/b] No es útil sobrescribir este método en GDScript o C#. Solo " "GDExtension puede aprovecharlo." msgid "" "Override this method to customize the processing behavior of this effect " "instance.\n" "Should return [code]true[/code] to force the [AudioServer] to always call " "[method _process], even if the bus has been muted or cannot otherwise be " "heard." msgstr "" "Sobrescribe este método para personalizar el comportamiento del procesamiento " "de esta instancia de efecto.\n" "Debe devolver [code]true[/code] para forzar que el [AudioServer] llame " "siempre a [method _process], incluso si el bus ha sido silenciado o no se " "puede escuchar de otra manera." msgid "Use [AudioEffectHardLimiter] instead." msgstr "Utiliza [AudioEffectHardLimiter] en su lugar." msgid "" "Determines the maximum frequency affected by the low-frequency oscillator " "modulations, in Hz. Value can range from 10 to 10000." msgstr "" "Determina la frecuencia máxima afectada por las modulaciones del oscilador de " "baja frecuencia, en Hz. El valor puede oscilar entre 10 y 10000." msgid "" "Determines the minimum frequency affected by the low-frequency oscillator " "modulations, in Hz. Value can range from 10 to 10000." msgstr "" "Determina la frecuencia mínima afectada por las modulaciones del oscilador de " "baja frecuencia, en Hz. El valor puede oscilar entre 10 y 10000." msgid "" "The oversampling factor to use. Higher values result in better quality, but " "are more demanding on the CPU and may cause audio cracking if the CPU can't " "keep up." msgstr "" "El factor de sobre muestreo a usar. Altos valores permiten obtener mejor " "calidad, pero aumenta la demanda de CPU y puede provocar fallas en el audio " "si el CPU no puede mantenerlo." msgid "" "Use a buffer of 256 samples for the Fast Fourier transform. Lowest latency, " "but least stable over time." msgstr "" "Utiliza un búfer de 256 muestras para la transformación rápida de Fourier. La " "latencia es mínima, pero la estabilidad a lo largo del tiempo es menor." msgid "" "Use a buffer of 512 samples for the Fast Fourier transform. Low latency, but " "less stable over time." msgstr "" "Utiliza un búfer de 512 muestras para la transformación rápida de Fourier. " "Baja latencia, pero menos estable en el tiempo." msgid "" "Use a buffer of 1024 samples for the Fast Fourier transform. This is a " "compromise between latency and stability over time." msgstr "" "Utiliza un búfer de 1024 muestras para la transformación rápida de Fourier. " "Esto supone un equilibrio entre latencia y estabilidad a lo largo del tiempo." msgid "" "Use a buffer of 2048 samples for the Fast Fourier transform. High latency, " "but stable over time." msgstr "" "Utiliza un búfer de 2048 muestras para la transformación rápida de Fourier. " "Alta latencia, pero estable en el tiempo." msgid "" "Use a buffer of 4096 samples for the Fast Fourier transform. Highest latency, " "but most stable over time." msgstr "" "Utiliza un búfer de 4096 muestras para la transformación rápida de Fourier. " "La latencia es máxima, pero la estabilidad a lo largo del tiempo es máxima." msgid "Represents the size of the [enum FFTSize] enum." msgstr "Representa el tamaño del enum [enum FFTSize]." msgid "Audio effect used for recording the sound from an audio bus." msgstr "Efecto de audio utilizado para grabar el sonido de un bus de audio." msgid "Recording with microphone" msgstr "Grabando con micrófono" msgid "Returns the recorded sample." msgstr "Devuelve la muestra registrada." msgid "Returns whether the recording is active or not." msgstr "Devuelve si la grabación está activa o no." msgid "" "If [code]true[/code], the sound will be recorded. Note that restarting the " "recording will remove the previously recorded sample." msgstr "" "Si es [code]true[/code], el sonido será grabado. Ten en cuenta que al " "reiniciar la grabación se eliminará la muestra previamente grabada." msgid "Specifies the format in which the sample will be recorded." msgstr "Especifica el formato en que se grabará la muestra." msgid "" "Dimensions of simulated room. Bigger means more echoes. Value can range from " "0 to 1." msgstr "" "Dimensiones de la habitación simulada. Más grande significa más ecos. El " "valor puede variar entre 0 y 1." msgid "Audio Spectrum Visualizer Demo" msgstr "Demo de Visualizador de Espectro de Audio" msgid "" "The size of the [url=https://en.wikipedia.org/wiki/" "Fast_Fourier_transform]Fast Fourier transform[/url] buffer. Higher values " "smooth out the spectrum analysis over time, but have greater latency. The " "effects of this higher latency are especially noticeable with sudden " "amplitude changes." msgstr "" "El tamaño del búfer de [url=https://en.wikipedia.org/wiki/" "Fast_Fourier_transform]Transformada rápida de Fourier[/url]. Valores más " "altos suavizan el análisis del espectro a lo largo del tiempo, pero generan " "mayor latencia. Los efectos de esta mayor latencia son especialmente notables " "con cambios repentinos de amplitud." msgid "Queryable instance of an [AudioEffectSpectrumAnalyzer]." msgstr "Instancia consultable de un [AudioEffectSpectrumAnalyzer]." msgid "" "The runtime part of an [AudioEffectSpectrumAnalyzer], which can be used to " "query the magnitude of a frequency range on its host bus.\n" "An instance of this class can be obtained with [method " "AudioServer.get_bus_effect_instance]." msgstr "" "La parte en tiempo de ejecución de un [AudioEffectSpectrumAnalyzer], que " "puede utilizarse para consultar la magnitud de un rango de frecuencias en su " "bus anfitrión.\n" "Se puede obtener una instancia de esta clase mediante [method " "AudioServer.get_bus_effect_instance]." msgid "" "Returns the magnitude of the frequencies from [param from_hz] to [param " "to_hz] in linear energy as a Vector2. The [code]x[/code] component of the " "return value represents the left stereo channel, and [code]y[/code] " "represents the right channel.\n" "[param mode] determines how the frequency range will be processed." msgstr "" "Devuelve la magnitud de las frecuencias comprendidas entre [param from_hz] y " "[param to_hz] en energía lineal, como un Vector2. El componente [code]x[/" "code] del valor devuelto representa el canal estéreo izquierdo, e [code]y[/" "code] representa el canal derecho.\n" "[param mode] determina cómo se procesará el rango de frecuencias." msgid "Use the average value across the frequency range as magnitude." msgstr "Usa el valor promedio en todo el rango de frecuencia como magnitud." msgid "Use the maximum value of the frequency range as magnitude." msgstr "Usa el valor máximo del rango de frecuencia como magnitud." msgid "Overrides the location sounds are heard from." msgstr "Sobrescribe los sonidos de localización que se escuchan." msgid "" "Once added to the scene tree and enabled using [method make_current], this " "node will override the location sounds are heard from. Only one " "[AudioListener2D] can be current. Using [method make_current] will disable " "the previous [AudioListener2D].\n" "If there is no active [AudioListener2D] in the current [Viewport], center of " "the screen will be used as a hearing point for the audio. [AudioListener2D] " "needs to be inside [SceneTree] to function." msgstr "" "Una vez añadido al árbol de escena y activado mediante [method make_current], " "este nodo sobrescribirá la ubicación desde la que se escuchan los sonidos. " "Solo un [AudioListener2D] puede estar activo. El uso de [method make_current] " "desactivará el [AudioListener2D] anterior.\n" "Si no hay ningún [AudioListener2D] activo en el [Viewport] actual, se " "utilizará el centro de la pantalla como punto de audición para el audio. El " "[AudioListener2D] debe estar dentro del [SceneTree] para funcionar." msgid "" "Disables the [AudioListener2D]. If it's not set as current, this method will " "have no effect." msgstr "" "Desactiva [AudioListener2D]. Si no está configurado como actual, este método " "no tendrá efecto." msgid "Returns [code]true[/code] if this [AudioListener2D] is currently active." msgstr "" "Devuelve [code]true[/code] si este [AudioListener2D] está actualmente activo." msgid "" "Makes the [AudioListener2D] active, setting it as the hearing point for the " "sounds. If there is already another active [AudioListener2D], it will be " "disabled.\n" "This method will have no effect if the [AudioListener2D] is not added to " "[SceneTree]." msgstr "" "Activa [AudioListener2D], estableciéndolo como punto de escucha de los " "sonidos. Si ya hay otro [AudioListener2D] activo, se deshabilitará.\n" "Este método no tendrá efecto si [AudioListener2D] no se añade a [SceneTree]." msgid "" "Once added to the scene tree and enabled using [method make_current], this " "node will override the location sounds are heard from. This can be used to " "listen from a location different from the [Camera3D]." msgstr "" "Una vez añadido al árbol de escenas y habilitado usando [method " "make_current], este nodo sobrescribirá la ubicación desde la que se escuchan " "los sonidos. Esto puede usarse para escuchar desde una ubicación diferente a " "la de la [Camera3D]." msgid "Disables the listener to use the current camera's listener instead." msgstr "" "Desactiva la escucha para usar la escucha de la cámara actual en su lugar." msgid "Enables the listener. This will override the current camera's listener." msgstr "" "Habilita el listener. Esto sobrescribirá el listener de la cámara actual." msgid "" "If not [constant DOPPLER_TRACKING_DISABLED], this listener will simulate the " "[url=https://en.wikipedia.org/wiki/Doppler_effect]Doppler effect[/url] for " "objects changed in particular [code]_process[/code] methods.\n" "[b]Note:[/b] The Doppler effect will only be heard on [AudioStreamPlayer3D]s " "if [member AudioStreamPlayer3D.doppler_tracking] is not set to [constant " "AudioStreamPlayer3D.DOPPLER_TRACKING_DISABLED]." msgstr "" "Si no es [constant DOPPLER_TRACKING_DISABLED], este oyente simulará el " "[url=https://es.wikipedia.org/wiki/Efecto_Doppler]efecto Doppler[/url] para " "los objetos modificados en métodos específicos de [code]_process[/code].\n" "[b]Nota:[/b] El efecto Doppler solo se escuchará en los [AudioStreamPlayer3D] " "si [member AudioStreamPlayer3D.doppler_tracking] no está configurado en " "[constant AudioStreamPlayer3D.DOPPLER_TRACKING_DISABLED]." msgid "" "Disables [url=https://en.wikipedia.org/wiki/Doppler_effect]Doppler effect[/" "url] simulation (default)." msgstr "" "Desactiva la simulación del [url=https://en.wikipedia.org/wiki/" "Doppler_effect]efecto Doppler[/url] (por defecto)." msgid "" "Simulate [url=https://en.wikipedia.org/wiki/Doppler_effect]Doppler effect[/" "url] by tracking positions of objects that are changed in [code]_process[/" "code]. Changes in the relative velocity of this listener compared to those " "objects affect how audio is perceived (changing the audio's [member " "AudioStreamPlayer3D.pitch_scale])." msgstr "" "Simula el [url=https://en.wikipedia.org/wiki/Doppler_effect]efecto Doppler[/" "url] rastreando las posiciones de los objetos que cambian en [code]_process[/" "code]. Los cambios en la velocidad relativa de este escuchador en comparación " "con esos objetos afectan cómo se percibe el audio (cambiando el [member " "AudioStreamPlayer3D.pitch_scale] del audio)." msgid "" "Simulate [url=https://en.wikipedia.org/wiki/Doppler_effect]Doppler effect[/" "url] by tracking positions of objects that are changed in " "[code]_physics_process[/code]. Changes in the relative velocity of this " "listener compared to those objects affect how audio is perceived (changing " "the audio's [member AudioStreamPlayer3D.pitch_scale])." msgstr "" "Simula el [url=https://es.wikipedia.org/wiki/Efecto_Doppler]efecto Doppler[/" "url] rastreando las posiciones de los objetos que cambian en " "[code]_physics_process[/code]. Los cambios en la velocidad relativa de este " "receptor en comparación con esos objetos afectan a cómo se percibe el audio " "(cambiando el [member AudioStreamPlayer3D.pitch_scale] del audio)." msgid "Base class for audio samples." msgstr "Clase base para muestras de audio." msgid "Meta class for playing back audio samples." msgstr "Metaclase para reproducir muestras de audio." msgid "Server interface for low-level audio access." msgstr "Interfaz de servidor para acceso de audio de bajo nivel." msgid "" "[AudioServer] is a low-level server interface for audio access. It is in " "charge of creating sample data (playable audio) as well as its playback via a " "voice interface." msgstr "" "[AudioServer] es una interfaz de servidor de bajo nivel para el acceso al " "audio. Se encarga de crear datos de muestra (audio reproducible) así como de " "su reproducción a través de una interfaz de voz." msgid "Audio Device Changer Demo" msgstr "Demo del Cambiador de Dispositivos de Audio" msgid "Adds a bus at [param at_position]." msgstr "Agrega un bus en [param at_position]." msgid "" "Adds an [AudioEffect] effect to the bus [param bus_idx] at [param " "at_position]." msgstr "" "Agrega un efecto [AudioEffect] al bus [param bus_idx] en [param at_position]." msgid "Generates an [AudioBusLayout] using the available buses and effects." msgstr "Genera un [AudioBusLayout] usando los buses y efectos disponibles." msgid "Returns the number of channels of the bus at index [param bus_idx]." msgstr "Devuelve el número de canales del bus en el índice [param bus_idx]." msgid "" "Returns the [AudioEffect] at position [param effect_idx] in bus [param " "bus_idx]." msgstr "" "Devuelve el [AudioEffect] en la posición [param effect_idx] en el bus [param " "bus_idx]." msgid "Returns the number of effects on the bus at [param bus_idx]." msgstr "Devuelve el número de efectos en el bus en [param bus_idx]." msgid "" "Returns the [AudioEffectInstance] assigned to the given bus and effect " "indices (and optionally channel)." msgstr "" "Devuelve la [AudioEffectInstance] asignada al bus dado y los indices de " "efecto (y opcionalmente el canal)." msgid "" "Returns the index of the bus with the name [param bus_name]. Returns " "[code]-1[/code] if no bus with the specified name exist." msgstr "" "Devuelve el índice del bus con el nombre [param bus_name]. Devuelve [code]-1[/" "code] si no existe ningún bus con el nombre especificado." msgid "Returns the name of the bus with the index [param bus_idx]." msgstr "Devuelve el nombre del bus con el índice [param bus_idx]." msgid "" "Returns the peak volume of the left speaker at bus index [param bus_idx] and " "channel index [param channel]." msgstr "" "Devuelve el volumen máximo del altavoz izquierdo en el índice de bus [param " "bus_idx] y el índice de canal [param channel]." msgid "" "Returns the peak volume of the right speaker at bus index [param bus_idx] and " "channel index [param channel]." msgstr "" "Devuelve el volumen máximo del altavoz derecho en el índice de bus [param " "bus_idx] y el índice de canal [param channel]." msgid "" "Returns the name of the bus that the bus at index [param bus_idx] sends to." msgstr "" "Devuelve el nombre del bus al que envía el bus en el índice [param bus_idx]." msgid "Returns the volume of the bus at index [param bus_idx] in dB." msgstr "Devuelve el volumen del bus en el índice [param bus_idx] en dB." msgid "" "Returns the volume of the bus at index [param bus_idx] as a linear value.\n" "[b]Note:[/b] The returned value is equivalent to the result of [method " "@GlobalScope.db_to_linear] on the result of [method get_bus_volume_db]." msgstr "" "Devuelve el volumen del bus en el índice [param bus_idx] como un valor " "lineal.\n" "[b]Nota:[/b] El valor devuelto es equivalente al resultado del método " "@GlobalScope.db_to_linear sobre el resultado del método get_bus_volume_db." msgid "" "Returns the name of the current audio driver. The default usually depends on " "the operating system, but may be overridden via the [code]--audio-driver[/" "code] [url=$DOCS_URL/tutorials/editor/command_line_tutorial.html]command line " "argument[/url]. [code]--headless[/code] also automatically sets the audio " "driver to [code]Dummy[/code]. See also [member ProjectSettings.audio/driver/" "driver]." msgstr "" "Devuelve el nombre del controlador de audio actual. El valor predeterminado " "suele depender del sistema operativo, pero puede sobrescribirse mediante el " "argumento de línea de comandos [code]--audio-driver[/code] [url=$DOCS_URL/" "tutorials/editor/command_line_tutorial.html][/url]. [code]--headless[/code] " "también establece automáticamente el controlador de audio como [code]Dummy[/" "code]. Véase también [member ProjectSettings.audio/driver/driver]." msgid "" "Returns the absolute size of the microphone input buffer. This is set to a " "multiple of the audio latency and can be used to estimate the minimum rate at " "which the frames need to be fetched." msgstr "" "Devuelve el tamaño absoluto del búfer de entrada del micrófono. Este valor se " "establece como un múltiplo de la latencia de audio y puede usarse para " "estimar la tasa mínima a la que se deben obtener los cuadros (frames)." msgid "" "Returns the names of all audio input devices detected on the system.\n" "[b]Note:[/b] [member ProjectSettings.audio/driver/enable_input] must be " "[code]true[/code] for audio input to work. See also that setting's " "description for caveats related to permissions and operating system privacy " "settings." msgstr "" "Devuelve los nombres de todos los dispositivos de entrada de audio detectados " "en el sistema.\n" "[b]Nota:[/b] El valor de [member ProjectSettings.audio/driver/enable_input] " "debe ser [code]true[/code] para que la entrada de audio funcione. Véase " "también la descripción de esta configuración para conocer las advertencias " "relacionadas con los permisos y la configuración de privacidad del sistema " "operativo." msgid "" "Returns a [PackedVector2Array] containing exactly [param frames] audio " "samples from the internal microphone buffer if available, otherwise returns " "an empty [PackedVector2Array].\n" "The buffer is filled at the rate of [method get_input_mix_rate] frames per " "second when [method set_input_device_active] has successfully been set to " "[code]true[/code].\n" "The samples are signed floating-point PCM values between [code]-1[/code] and " "[code]1[/code]." msgstr "" "Devuelve un [PackedVector2Array] que contiene exactamente [param frames] " "muestras de audio del búfer interno del micrófono, si está disponible. De lo " "contrario, devuelve un [PackedVector2Array] vacío.\n" "El búfer se llena a una tasa de [method get_input_mix_rate] cuadros por " "segundo cuando [method set_input_device_active] se ha configurado " "correctamente en [code]true[/code].\n" "Las muestras son valores PCM de punto flotante con signo entre [code]-1[/" "code] y [code]1[/code]." msgid "Returns the sample rate at the input of the [AudioServer]." msgstr "Devuelve la frecuencia de muestreo en la entrada del [AudioServer]." msgid "Returns the sample rate at the output of the [AudioServer]." msgstr "Devuelve la frecuencia de muestreo a la salida del [AudioServer]." msgid "Returns the names of all audio output devices detected on the system." msgstr "" "Devuelve los nombres de todos los dispositivos de salida de audio detectados " "en el sistema." msgid "" "Returns the audio driver's effective output latency. This is based on [member " "ProjectSettings.audio/driver/output_latency], but the exact returned value " "will differ depending on the operating system and audio driver.\n" "[b]Note:[/b] This can be expensive; it is not recommended to call [method " "get_output_latency] every frame." msgstr "" "Devuelve la latencia de salida efectiva del controlador de audio. Esto se " "basa en [member ProjectSettings.audio/driver/output_latency], pero el valor " "exacto devuelto varía según el sistema operativo y el controlador de audio.\n" "[b]Nota:[/b] Esto puede ser costoso; no se recomienda llamar al método " "[method get_output_latency] en cada fotograma." msgid "Returns the speaker configuration." msgstr "Devuelve la configuración de los altavoces." msgid "" "If [code]true[/code], the bus at index [param bus_idx] is bypassing effects." msgstr "" "Si es [code]true[/code], el bus en el índice [param bus_idx] está omitiendo " "los efectos." msgid "" "If [code]true[/code], the effect at index [param effect_idx] on the bus at " "index [param bus_idx] is enabled." msgstr "" "Si es [code]true[/code], se habilita el efecto en el índice [param " "effect_idx] en el bus en el índice [param bus_idx]." msgid "If [code]true[/code], the bus at index [param bus_idx] is muted." msgstr "" "Si es [code]true[/code], el bus en el índice [param bus_idx] se silencia." msgid "If [code]true[/code], the bus at index [param bus_idx] is in solo mode." msgstr "" "Si es [code]true[/code], el bus en el índice [param bus_idx] está en modo " "solo." msgid "" "If [code]true[/code], the stream is registered as a sample. The engine will " "not have to register it before playing the sample.\n" "If [code]false[/code], the stream will have to be registered before playing " "it. To prevent lag spikes, register the stream as sample with [method " "register_stream_as_sample]." msgstr "" "Si es [code]true[/code], la transmisión se registra como muestra. El motor no " "tendrá que registrarla antes de reproducirla.\n" "Si es [code]false[/code], la transmisión deberá registrarse antes de " "reproducirla. Para evitar picos de retardo, registra la transmisión como " "muestra con [method register_stream_as_sample]." msgid "" "Locks the audio driver's main loop.\n" "[b]Note:[/b] Remember to unlock it afterwards." msgstr "" "Bloquea el bucle principal del controlador de audio.\n" "[b]Nota:[/b] Recuerda desbloquearlo después." msgid "Moves the bus from index [param index] to index [param to_index]." msgstr "Mueve el bus del índice [param index] al índice [param to_index]." msgid "" "Forces the registration of a stream as a sample.\n" "[b]Note:[/b] Lag spikes may occur when calling this method, especially on " "single-threaded builds. It is suggested to call this method while loading " "assets, where the lag spike could be masked, instead of registering the " "sample right before it needs to be played." msgstr "" "Fuerza el registro de una secuencia como muestra.\n" "[b]Nota:[/b] Pueden producirse picos de retardo al llamar a este método, " "especialmente en compilaciones de un solo subproceso. Se recomienda llamar a " "este método durante la carga de recursos, donde el pico de retardo podría " "quedar oculto, en lugar de registrar la muestra justo antes de su " "reproducción." msgid "Removes the bus at index [param index]." msgstr "Elimina el bus en el índice [param index]." msgid "" "Removes the effect at index [param effect_idx] from the bus at index [param " "bus_idx]." msgstr "" "Elimina el efecto en el índice [param effect_idx] del bus en el índice [param " "bus_idx]." msgid "Overwrites the currently used [AudioBusLayout]." msgstr "Sobrescribe el [AudioBusLayout] actualmente utilizado." msgid "Sets the name of the bus at index [param bus_idx] to [param name]." msgstr "" "Establece el nombre del bus en el índice [param bus_idx] en [param name]." msgid "" "Connects the output of the bus at [param bus_idx] to the bus named [param " "send]." msgstr "" "Conecta la salida del bus en [param bus_idx] al bus llamado [param send]." msgid "" "Sets the volume in decibels of the bus at index [param bus_idx] to [param " "volume_db]." msgstr "" "Establece el volumen en decibeles del bus en el índice [param bus_idx] a " "[param volume_db]." msgid "" "Sets the volume as a linear value of the bus at index [param bus_idx] to " "[param volume_linear].\n" "[b]Note:[/b] Using this method is equivalent to calling [method " "set_bus_volume_db] with the result of [method @GlobalScope.linear_to_db] on a " "value." msgstr "" "Establece el volumen como un valor lineal del bus en el índice [param " "bus_idx] a [param volume_linear].\n" "[b]Nota:[/b] Usar este método equivale a llamar a [method set_bus_volume_db] " "con el resultado de [method @GlobalScope.linear_to_db] en un valor." msgid "" "If set to [code]true[/code], all instances of [AudioStreamPlayback] will call " "[method AudioStreamPlayback._tag_used_streams] every mix step.\n" "[b]Note:[/b] This is enabled by default in the editor, as it is used by " "editor plugins for the audio stream previews." msgstr "" "Si se establece como [code]true[/code], todas las instancias de " "[AudioStreamPlayback] llamarán a [method " "AudioStreamPlayback._tag_used_streams] en cada paso de la mezcla.\n" "[b]Nota:[/b] Esta opción está habilitada de forma predeterminada en el " "editor, ya que la utilizan los plugins del editor para las vistas previas de " "las transmisiones de audio." msgid "" "If [param active] is [code]true[/code], starts the microphone input stream " "specified by [member input_device] or returns an error if it failed.\n" "If [param active] is [code]false[/code], stops the input stream if it is " "running." msgstr "" "Si [param active] es [code]true[/code], inicia el flujo de entrada del " "micrófono especificado por [member input_device] o devuelve un error si " "falla.\n" "Si [param active] es [code]false[/code], detiene el flujo de entrada si está " "en ejecución." msgid "Swaps the position of two effects in bus [param bus_idx]." msgstr "Intercambia la posición de dos efectos en el bus [param bus_idx]." msgid "" "Unlocks the audio driver's main loop. (After locking it, you should always " "unlock it.)" msgstr "" "Desbloquea el bucle principal del controlador de audio. (Después de cerrarlo, " "siempre debes abrirlo.)" msgid "Number of available audio buses." msgstr "Número de buses de audio disponibles." msgid "" "Name of the current device for audio input (see [method " "get_input_device_list]). On systems with multiple audio inputs (such as " "analog, USB and HDMI audio), this can be used to select the audio input " "device. The value [code]\"Default\"[/code] will record audio on the system-" "wide default audio input. If an invalid device name is set, the value will be " "reverted back to [code]\"Default\"[/code].\n" "[b]Note:[/b] [member ProjectSettings.audio/driver/enable_input] must be " "[code]true[/code] for audio input to work. See also that setting's " "description for caveats related to permissions and operating system privacy " "settings." msgstr "" "Nombre del dispositivo actual para la entrada de audio (ver [method " "get_input_device_list]). En sistemas con múltiples entradas de audio (como " "analógica, USB o HDMI), ésto se puede usar para seleccionar el dispositivo de " "entrada de audio. El valor [code]\"Default\"[/code] grabará audio desde la " "entrada de audio predeterminada del sistema. Si se establece un nombre de " "dispositivo no válido, el valor se revertirá a [code]\"Default\"[/code].\n" "[b]Nota:[/b] [member ProjectSettings.audio/driver/enable_input] debe ser " "[code]true[/code] para que la entrada de audio funcione. Véase también la " "descripción de esa configuración para advertencias relacionadas con permisos " "y ajustes de privacidad del sistema operativo." msgid "" "Name of the current device for audio output (see [method " "get_output_device_list]). On systems with multiple audio outputs (such as " "analog, USB and HDMI audio), this can be used to select the audio output " "device. The value [code]\"Default\"[/code] will play audio on the system-wide " "default audio output. If an invalid device name is set, the value will be " "reverted back to [code]\"Default\"[/code]." msgstr "" "Nombre del dispositivo actual para la salida de audio (ver [method " "get_output_device_list]). En sistemas con múltiples salidas de audio (como " "analógica, USB o HDMI), ésto se puede usar para seleccionar el dispositivo de " "salida de audio. El valor [code]\"Default\"[/code] reproducirá audio a través " "de la salida de audio predeterminada del sistema. Si se establece un nombre " "de dispositivo no válido, el valor se revertirá a [code]\"Default\"[/code]." msgid "Emitted when an audio bus is added, deleted, or moved." msgstr "Emitida cuando se agrega, elimina o mueve un bus de audio." msgid "" "Emitted when the audio bus at [param bus_index] is renamed from [param " "old_name] to [param new_name]." msgstr "" "Emitida cuando el bus de audio en [param bus_index] cambia de nombre de " "[param old_name] a [param new_name]." msgid "Two or fewer speakers were detected." msgstr "Se detectaron dos o menos altavoces." msgid "A 3.1 channel surround setup was detected." msgstr "Se detectó una configuración de sonido envolvente de 3.1 canales." msgid "A 5.1 channel surround setup was detected." msgstr "Se detectó una configuración de sonido envolvente de 5.1 canales." msgid "A 7.1 channel surround setup was detected." msgstr "Se detectó una configuración de sonido envolvente de 7.1 canales." msgid "" "The playback will be considered of the type declared at [member " "ProjectSettings.audio/general/default_playback_type]." msgstr "" "La reproducción se considerará del tipo declarado en [member " "ProjectSettings.audio/general/default_playback_type]." msgid "Force the playback to be considered as a stream." msgstr "Fuerza a que la reproducción se considere como una transmisión." msgid "" "Force the playback to be considered as a sample. This can provide lower " "latency and more stable playback (with less risk of audio crackling), at the " "cost of having less flexibility.\n" "[b]Note:[/b] Only currently supported on the web platform.\n" "[b]Note:[/b] [AudioEffect]s are not supported when playback is considered as " "a sample." msgstr "" "Fuerza a que la reproducción se considere una muestra. Esto puede " "proporcionar una latencia más baja y una reproducción más estable (con menor " "riesgo de crujidos de audio), a costa de una menor flexibilidad.\n" "[b]Nota:[/b] Actualmente solo es compatible con la plataforma web.\n" "[b]Nota:[/b] Los efectos de audio no son compatibles cuando la reproducción " "se considera una muestra." msgid "Represents the size of the [enum PlaybackType] enum." msgstr "Representa el tamaño del enum [enum PlaybackType]." msgid "Base class for audio streams." msgstr "Clase base para las transmisiones de audio." msgid "Audio streams" msgstr "Corriente de Audio" msgid "Audio Generator Demo" msgstr "Demo de Generador de Audio" msgid "Override this method to return the bar beats of this stream." msgstr "Sobrescribe este método para devolver los compases de esta transmisión." msgid "" "Overridable method. Should return the total number of beats of this audio " "stream. Used by the engine to determine the position of every beat.\n" "Ideally, the returned value should be based off the stream's sample rate " "([member AudioStreamWAV.mix_rate], for example)." msgstr "" "Método sobrescribible. Debe devolver el número total de pulsos de esta " "secuencia de audio. El motor lo utiliza para determinar la posición de cada " "pulso.\n" "Idealmente, el valor devuelto debería basarse en la frecuencia de muestreo de " "la secuencia (por ejemplo, [member AudioStreamWAV.mix_rate])." msgid "" "Overridable method. Should return the tempo of this audio stream, in beats " "per minute (BPM). Used by the engine to determine the position of every " "beat.\n" "Ideally, the returned value should be based off the stream's sample rate " "([member AudioStreamWAV.mix_rate], for example)." msgstr "" "Método que se puede sobrescribir. Debe devolver el tempo de este flujo de " "audio, en pulsos por minuto (BPM, siglas de Beats Per Minute). El motor lo " "utiliza para determinar la posición de cada pulso.\n" "Idealmente, el valor devuelto debería basarse en la frecuencia de muestreo " "del flujo ([member AudioStreamWAV.mix_rate], por ejemplo)." msgid "" "Override this method to customize the returned value of [method get_length]. " "Should return the length of this audio stream, in seconds." msgstr "" "Sobrescribe este método para personalizar el valor devuelto por [method " "get_length]. Debe devolver la duración de este flujo de audio, en segundos." msgid "" "Return the controllable parameters of this stream. This array contains " "dictionaries with a property info description format (see [method " "Object.get_property_list]). Additionally, the default value for this " "parameter must be added tho each dictionary in \"default_value\" field." msgstr "" "Devuelve los parámetros controlables de este flujo. Este array contiene " "diccionarios con una descripción de la propiedad en formato info (ver [method " "Object.get_property_list]). Además, el valor por defecto de cada parámetro " "debe añadirse a cada diccionario en el campo \"default_value\"." msgid "" "Override this method to customize the name assigned to this audio stream. " "Unused by the engine." msgstr "" "Sobrescribe este método para proporcionar el nombre que aparecerá en el menú " "de visibilidad del gizmo." msgid "" "Override this method to customize the tags for this audio stream. Should " "return a [Dictionary] of strings with the tag as the key and its content as " "the value.\n" "Commonly used tags include [code]title[/code], [code]artist[/code], " "[code]album[/code], [code]tracknumber[/code], and [code]date[/code]." msgstr "" "Sobrescribe este método para personalizar las etiquetas de este flujo de " "audio. Debe devolver un [Dictionary] de cadenas, con la etiqueta como clave y " "su contenido como valor.\n" "Las etiquetas más comunes incluyen [code]title[/code], [code]artist[/code], " "[code]album[/code], [code]tracknumber[/code] y [code]date[/code]." msgid "" "Override this method to return [code]true[/code] if this stream has a loop." msgstr "" "Sobrescribe este método para devolver [code]true[/code] si esta secuencia " "tiene un bucle." msgid "" "Override this method to customize the returned value of [method " "instantiate_playback]. Should return a new [AudioStreamPlayback] created when " "the stream is played (such as by an [AudioStreamPlayer])." msgstr "" "Sobrescribe este método para personalizar el valor devuelto por [method " "instantiate_playback]. Debe devolver un nuevo [AudioStreamPlayback] que se " "crea cuando el flujo se reproduce (por ejemplo, mediante un " "[AudioStreamPlayer])." msgid "" "Override this method to customize the returned value of [method " "is_monophonic]. Should return [code]true[/code] if this audio stream only " "supports one channel." msgstr "" "Sobrescribe este método para personalizar el valor devuelto por [method " "is_monophonic]. Debe devolver [code]true[/code] si este flujo de audio solo " "admite un canal." msgid "" "Returns if the current [AudioStream] can be used as a sample. Only static " "streams can be sampled." msgstr "" "Devuelve si el [AudioStream] actual puede utilizarse como muestra. Solo los " "flujos estáticos pueden utilizarse como muestra." msgid "Generates an [AudioSample] based on the current stream." msgstr "Genera un [AudioSample] basado en la transmisión actual." msgid "" "Returns the length of the audio stream in seconds. If this stream is an " "[AudioStreamRandomizer], returns the length of the last played stream. If " "this stream has an indefinite length (such as for [AudioStreamGenerator] and " "[AudioStreamMicrophone]), returns [code]0.0[/code]." msgstr "" "Devuelve la duración del flujo de audio en segundos. Si este flujo es un " "[AudioStreamRandomizer], devuelve la duración del último flujo reproducido. " "Si este flujo tiene una duración indefinida (como en [AudioStreamGenerator] y " "[AudioStreamMicrophone]), devuelve [code]0.0[/code]." msgid "" "Returns a newly created [AudioStreamPlayback] intended to play this audio " "stream. Useful for when you want to extend [method _instantiate_playback] but " "call [method instantiate_playback] from an internally held AudioStream " "subresource. An example of this can be found in the source code for " "[code]AudioStreamRandomPitch::instantiate_playback[/code]." msgstr "" "Devuelve un nuevo [AudioStreamPlayback] creado para reproducir este flujo de " "audio. Resulta útil cuando se desea extender [method _instantiate_playback], " "pero llamando a [method instantiate_playback] desde un subrecurso AudioStream " "mantenido internamente. Un ejemplo de esto puede encontrarse en el código " "fuente de [code]AudioStreamRandomPitch::instantiate_playback[/code]." msgid "" "Returns [code]true[/code] if the stream is a collection of other streams, " "[code]false[/code] otherwise." msgstr "" "Devuelve [code]true[/code] si la transmisión es una colección de otras " "transmisiones, [code]false[/code] en caso contrario." msgid "" "Returns [code]true[/code] if this audio stream only supports one channel " "([i]monophony[/i]), or [code]false[/code] if the audio stream supports two or " "more channels ([i]polyphony[/i])." msgstr "" "Devuelve [code]true[/code] si este flujo de audio solo admite un canal " "([i]monofonía[/i]), o [code]false[/code] si el flujo de audio admite dos o " "más canales ([i]polifonía[/i])." msgid "Signal to be emitted to notify when the parameter list changed." msgstr "" "Señal a emitir para notificar cuando se modifica la lista de parámetros." msgid "An audio stream with utilities for procedural sound generation." msgstr "" "Una transmisión de audio con utilidades para la generación de sonido " "procedimental." msgid "" "[AudioStreamGenerator] is a type of audio stream that does not play back " "sounds on its own; instead, it expects a script to generate audio data for " "it. See also [AudioStreamGeneratorPlayback].\n" "Here's a sample on how to use it to generate a sine wave:\n" "[codeblocks]\n" "[gdscript]\n" "var playback # Will hold the AudioStreamGeneratorPlayback.\n" "@onready var sample_hz = $AudioStreamPlayer.stream.mix_rate\n" "var pulse_hz = 440.0 # The frequency of the sound wave.\n" "var phase = 0.0\n" "\n" "func _ready():\n" "\t$AudioStreamPlayer.play()\n" "\tplayback = $AudioStreamPlayer.get_stream_playback()\n" "\tfill_buffer()\n" "\n" "func fill_buffer():\n" "\tvar increment = pulse_hz / sample_hz\n" "\tvar frames_available = playback.get_frames_available()\n" "\n" "\tfor i in range(frames_available):\n" "\t\tplayback.push_frame(Vector2.ONE * sin(phase * TAU))\n" "\t\tphase = fmod(phase + increment, 1.0)\n" "[/gdscript]\n" "[csharp]\n" "[Export] public AudioStreamPlayer Player { get; set; }\n" "\n" "private AudioStreamGeneratorPlayback _playback; // Will hold the " "AudioStreamGeneratorPlayback.\n" "private float _sampleHz;\n" "private float _pulseHz = 440.0f; // The frequency of the sound wave.\n" "private double phase = 0.0;\n" "\n" "public override void _Ready()\n" "{\n" "\tif (Player.Stream is AudioStreamGenerator generator) // Type as a generator " "to access MixRate.\n" "\t{\n" "\t\t_sampleHz = generator.MixRate;\n" "\t\tPlayer.Play();\n" "\t\t_playback = (AudioStreamGeneratorPlayback)Player.GetStreamPlayback();\n" "\t\tFillBuffer();\n" "\t}\n" "}\n" "\n" "public void FillBuffer()\n" "{\n" "\tfloat increment = _pulseHz / _sampleHz;\n" "\tint framesAvailable = _playback.GetFramesAvailable();\n" "\n" "\tfor (int i = 0; i < framesAvailable; i++)\n" "\t{\n" "\t\t_playback.PushFrame(Vector2.One * (float)Mathf.Sin(phase * Mathf.Tau));\n" "\t\tphase = Mathf.PosMod(phase + increment, 1.0);\n" "\t}\n" "}\n" "[/csharp]\n" "[/codeblocks]\n" "In the example above, the \"AudioStreamPlayer\" node must use an " "[AudioStreamGenerator] as its stream. The [code]fill_buffer[/code] function " "provides audio data for approximating a sine wave.\n" "See also [AudioEffectSpectrumAnalyzer] for performing real-time audio " "spectrum analysis.\n" "[b]Note:[/b] Due to performance constraints, this class is best used from C# " "or from a compiled language via GDExtension. If you still want to use this " "class from GDScript, consider using a lower [member mix_rate] such as 11,025 " "Hz or 22,050 Hz." msgstr "" "[AudioStreamGenerator] es un tipo de flujo de audio que no reproduce sonidos " "por sí mismo; en su lugar, espera que un script le genere datos de audio. " "Véase también [AudioStreamGeneratorPlayback].\n" "Aquí hay un ejemplo de cómo usarlo para generar una onda sinusoidal:\n" "[codeblocks]\n" "[gdscript]\n" "var playback # Contendrá el AudioStreamGeneratorPlayback.\n" "@onready var sample_hz = $AudioStreamPlayer.stream.mix_rate\n" "var pulse_hz = 440.0 # La frecuencia de la onda de sonido.\n" "var phase = 0.0\n" "\n" "func _ready():\n" "\t$AudioStreamPlayer.play()\n" "\tplayback = $AudioStreamPlayer.get_stream_playback()\n" "\tfill_buffer()\n" "\n" "func fill_buffer():\n" "\tvar increment = pulse_hz / sample_hz\n" "\tvar frames_available = playback.get_frames_available()\n" "\n" "\tfor i in range(frames_available):\n" "\t\tplayback.push_frame(Vector2.ONE * sin(phase * TAU))\n" "\t\tphase = fmod(phase + increment, 1.0)\n" "[/gdscript]\n" "[csharp]\n" "[Export] public AudioStreamPlayer Player { get; set; }\n" "\n" "private AudioStreamGeneratorPlayback _playback; // Contendrá el " "AudioStreamGeneratorPlayback.\n" "private float _sampleHz;\n" "private float _pulseHz = 440.0f; // La frecuencia de la onda de sonido.\n" "private double phase = 0.0;\n" "\n" "public override void _Ready()\n" "{\n" "\tif (Player.Stream is AudioStreamGenerator generator) // Tipo como generador " "para acceder a MixRate.\n" "\t{\n" "\t\t_sampleHz = generator.MixRate;\n" "\t\tPlayer.Play();\n" "\t\t_playback = (AudioStreamGeneratorPlayback)Player.GetStreamPlayback();\n" "\t\tFillBuffer();\n" "\t}\n" "}\n" "\n" "public void FillBuffer()\n" "{\n" "\tfloat increment = _pulseHz / _sampleHz;\n" "\tint framesAvailable = _playback.GetFramesAvailable();\n" "\n" "\tfor (int i = 0; i < framesAvailable; i++)\n" "\t{\n" "\t\t_playback.PushFrame(Vector2.One * (float)Mathf.Sin(phase * Mathf.Tau));\n" "\t\tphase = Mathf.PosMod(phase + increment, 1.0);\n" "\t}\n" "}\n" "[/csharp]\n" "[/codeblocks]\n" "En el ejemplo anterior, el nodo \"AudioStreamPlayer\" debe usar un " "[AudioStreamGenerator] como su flujo. La función [code]fill_buffer[/code] " "proporciona datos de audio para aproximar una onda sinusoidal.\n" "Véase también [AudioEffectSpectrumAnalyzer] para realizar análisis de " "espectro de audio en tiempo real.\n" "[b]Nota:[/b] Debido a limitaciones de rendimiento, esta clase se usa mejor " "desde C# o desde un lenguaje compilado mediante GDExtension. Si aún deseas " "usar esta clase desde GDScript, considera usar un [member mix_rate] más bajo, " "como 11,025 Hz o 22,050 Hz." msgid "" "The length of the buffer to generate (in seconds). Lower values result in " "less latency, but require the script to generate audio data faster, resulting " "in increased CPU usage and more risk for audio cracking if the CPU can't keep " "up." msgstr "" "La duración del búfer a generar (en segundos). Valores más bajos resultan en " "menor latencia, pero requieren que el script genere los datos de audio más " "rápido, lo que aumenta el uso de la CPU y el riesgo de interrupciones en el " "audio (cracking) si la CPU no puede mantener el ritmo." msgid "" "The sample rate to use (in Hz). Higher values are more demanding for the CPU " "to generate, but result in better quality.\n" "In games, common sample rates in use are [code]11025[/code], [code]16000[/" "code], [code]22050[/code], [code]32000[/code], [code]44100[/code], and " "[code]48000[/code].\n" "According to the [url=https://en.wikipedia.org/wiki/" "Nyquist%E2%80%93Shannon_sampling_theorem]Nyquist-Shannon sampling theorem[/" "url], there is no quality difference to human hearing when going past 40,000 " "Hz (since most humans can only hear up to ~20,000 Hz, often less). If you are " "generating lower-pitched sounds such as voices, lower sample rates such as " "[code]32000[/code] or [code]22050[/code] may be usable with no loss in " "quality.\n" "[b]Note:[/b] [AudioStreamGenerator] is not automatically resampling input " "data, to produce expected result [member mix_rate_mode] should match the " "sampling rate of input data.\n" "[b]Note:[/b] If you are using [AudioEffectCapture] as the source of your " "data, set [member mix_rate_mode] to [constant MIX_RATE_INPUT] or [constant " "MIX_RATE_OUTPUT] to automatically match current [AudioServer] mixing rate." msgstr "" "La frecuencia de muestreo a utilizar (en Hz). Los valores más altos son más " "exigentes para la CPU al generarlos, pero dan como resultado una mejor " "calidad.\n" "En los juegos, las frecuencias de muestreo habituales son [code]11025[/code], " "[code]16000[/code], [code]22050[/code], [code]32000[/code], [code]44100[/" "code] y [code]48000[/code].\n" "Según el [url=https://es.wikipedia.org/wiki/Teorema_de_muestreo_de_Nyquist-" "Shannon]teorema de muestreo de Nyquist-Shannon[/url], no hay diferencia de " "calidad para el oído humano al superar los 40.000 Hz (ya que la mayoría de " "los humanos solo pueden oír hasta ~20.000 Hz, a menudo menos). Si estás " "generando sonidos de tono más bajo, como voces, se pueden utilizar " "frecuencias de muestreo menores, como [code]32000[/code] o [code]22050[/" "code], sin pérdida de calidad.\n" "[b]Nota:[/b] [AudioStreamGenerator] no remuestrea automáticamente los datos " "de entrada; para obtener el resultado esperado, [member mix_rate_mode] debe " "coincidir con la frecuencia de muestreo de los datos de entrada.\n" "[b]Nota:[/b] Si utilizas [AudioEffectCapture] como fuente de tus datos, " "establece [member mix_rate_mode] en [constant MIX_RATE_INPUT] o [constant " "MIX_RATE_OUTPUT] para que coincida automáticamente con la frecuencia de " "mezcla actual del [AudioServer]." msgid "" "Mixing rate mode. If set to [constant MIX_RATE_CUSTOM], [member mix_rate] is " "used, otherwise current [AudioServer] mixing rate is used." msgstr "" "Modo de frecuencia de mezcla. Si se establece en [constant MIX_RATE_CUSTOM], " "se utiliza [member mix_rate]; de lo contrario, se utiliza la frecuencia de " "mezcla actual de [AudioServer]." msgid "Current [AudioServer] output mixing rate." msgstr "Frecuencia de mezcla de salida actual de [AudioServer]." msgid "Current [AudioServer] input mixing rate." msgstr "Frecuencia de mezcla de entrada actual de [AudioServer]." msgid "Custom mixing rate, specified by [member mix_rate]." msgstr "Tasa de mezcla personalizada, especificada por [member mix_rate]." msgid "Maximum value for the mixing rate mode enum." msgstr "Valor máximo para la enumeración del modo de velocidad de mezcla." msgid "Plays back audio generated using [AudioStreamGenerator]." msgstr "Reproduce audio generado mediante [AudioStreamGenerator]." msgid "" "This class is meant to be used with [AudioStreamGenerator] to play back the " "generated audio in real-time." msgstr "" "Esta clase está destinada a ser utilizada con [AudioStreamGenerator] para " "reproducir el audio generado en tiempo real." msgid "Godot 3.2 will get new audio features" msgstr "Godot 3.2 obtendrá nuevas funciones de audio" msgid "" "Returns [code]true[/code] if a buffer of the size [param amount] can be " "pushed to the audio sample data buffer without overflowing it, [code]false[/" "code] otherwise." msgstr "" "Devuelve [code]true[/code] si se puede enviar un búfer del tamaño [param " "amount] al búfer de datos de muestra de audio sin desbordarlo, [code]false[/" "code] en caso contrario." msgid "Clears the audio sample data buffer." msgstr "Borra el búfer de datos de muestra de audio." msgid "" "Returns the number of frames that can be pushed to the audio sample data " "buffer without overflowing it. If the result is [code]0[/code], the buffer is " "full." msgstr "" "Devuelve el número de fotogramas que se pueden enviar al búfer de datos de " "muestra de audio sin desbordarlo. Si el resultado es [code]0[/code], el búfer " "está lleno." msgid "" "Returns the number of times the playback skipped due to a buffer underrun in " "the audio sample data. This value is reset at the start of the playback." msgstr "" "Devuelve el número de veces que se omitió la reproducción debido a una " "insuficiencia de búfer en los datos de muestra de audio. Este valor se " "restablece al inicio de la reproducción." msgid "" "Pushes several audio data frames to the buffer. This is usually more " "efficient than [method push_frame] in C# and compiled languages via " "GDExtension, but [method push_buffer] may be [i]less[/i] efficient in " "GDScript." msgstr "" "Envía varias tramas de datos de audio al búfer. Esto suele ser más eficiente " "que [method push_frame] en C# y lenguajes compilados mediante GDExtension, " "pero [method push_buffer] puede ser [i]menos[/i] eficiente en GDScript." msgid "" "Pushes a single audio data frame to the buffer. This is usually less " "efficient than [method push_buffer] in C# and compiled languages via " "GDExtension, but [method push_frame] may be [i]more[/i] efficient in GDScript." msgstr "" "Envía una sola trama de datos de audio al búfer. Esto suele ser menos " "eficiente que [method push_buffer] en C# y lenguajes compilados mediante " "GDExtension, pero [method push_frame] puede ser [i]más[/i] eficiente en " "GDScript." msgid "" "Audio stream that can playback music interactively, combining clips and a " "transition table." msgstr "" "Transmisión de audio que puede reproducir música de forma interactiva, " "combinando clips y una tabla de transición." msgid "" "This is an audio stream that can playback music interactively, combining " "clips and a transition table. Clips must be added first, and then the " "transition rules via the [method add_transition]. Additionally, this stream " "exports a property parameter to control the playback via [AudioStreamPlayer], " "[AudioStreamPlayer2D], or [AudioStreamPlayer3D].\n" "The way this is used is by filling a number of clips, then configuring the " "transition table. From there, clips are selected for playback and the music " "will smoothly go from the current to the new one while using the " "corresponding transition rule defined in the transition table." msgstr "" "Este flujo de audio permite reproducir música interactivamente, combinando " "clips y una tabla de transiciones. Primero se deben agregar los clips y, a " "continuación, las reglas de transición mediante el método [method " "add_transition]. Además, este flujo exporta un parámetro de propiedad para " "controlar la reproducción mediante [AudioStreamPlayer], [AudioStreamPlayer2D] " "o [AudioStreamPlayer3D].\n" "Para ello, se completan varios clips y luego se configura la tabla de " "transiciones. A partir de ahí, se seleccionan los clips para su reproducción " "y la música se reproduce fluidamente del actual al nuevo, utilizando la regla " "de transición correspondiente definida en la tabla." msgid "" "Add a transition between two clips. Provide the indices of the source and " "destination clips, or use the [constant CLIP_ANY] constant to indicate that " "transition happens to/from any clip to this one.\n" "* [param from_time] indicates the moment in the current clip the transition " "will begin after triggered.\n" "* [param to_time] indicates the time in the next clip that the playback will " "start from.\n" "* [param fade_mode] indicates how the fade will happen between clips. If " "unsure, just use [constant FADE_AUTOMATIC] which uses the most common type of " "fade for each situation.\n" "* [param fade_beats] indicates how many beats the fade will take. Using " "decimals is allowed.\n" "* [param use_filler_clip] indicates that there will be a filler clip used " "between the source and destination clips.\n" "* [param filler_clip] the index of the filler clip.\n" "* If [param hold_previous] is used, then this clip will be remembered. This " "can be used together with [constant AUTO_ADVANCE_RETURN_TO_HOLD] to return to " "this clip after another is done playing." msgstr "" "Añade una transición entre dos clips. Proporciona los índices de los clips de " "origen y destino, o utiliza la constante [constant CLIP_ANY] para indicar que " "la transición ocurre desde o hacia cualquier clip a éste.\n" "* [param from_time] indica el momento en el clip actual en el que comenzará " "la transición después de activarse.\n" "* [param to_time] indica el tiempo en el siguiente clip desde el cual " "comenzará la reproducción.\n" "* [param fade_mode] indica cómo ocurrirá el desvanecimiento entre clips. En " "caso de duda, utiliza [constant FADE_AUTOMATIC], que emplea el tipo de " "desvanecimiento más común para cada situación.\n" "* [param fade_beats] indica cuántos pulsos durará el desvanecimiento. Se " "permite el uso de decimales.\n" "* [param use_filler_clip] indica que se utilizará un clip de relleno entre " "los clips de origen y destino.\n" "* [param filler_clip] el índice del clip de relleno.\n" "* Si se utiliza [param hold_previous], este clip será recordado. Esto se " "puede usar junto con [constant AUTO_ADVANCE_RETURN_TO_HOLD] para volver a " "este clip después de que otro termine de reproducirse." msgid "" "Erase a transition by providing [param from_clip] and [param to_clip] clip " "indices. [constant CLIP_ANY] can be used for either argument or both." msgstr "" "Borra una transición proporcionando los índices de clip [param from_clip] y " "[param to_clip]. [constant CLIP_ANY] se puede utilizar para cualquiera de los " "argumentos o para ambos." msgid "" "Return whether a clip has auto-advance enabled. See [method " "set_clip_auto_advance]." msgstr "" "Indica si un clip tiene habilitado el avance automático. Véase [method " "set_clip_auto_advance]." msgid "" "Return the clip towards which the clip referenced by [param clip_index] will " "auto-advance to." msgstr "" "Devuelve el clip hacia el cual avanzará automáticamente el clip referenciado " "por [param clip_index]." msgid "Return the name of a clip." msgstr "Devuelve el nombre de un clip." msgid "Return the [AudioStream] associated with a clip." msgstr "Devuelve el [AudioStream] asociado con un clip." msgid "Return the mode for a transition (see [method add_transition])." msgstr "Devuelve el modo de una transición (véase [method add_transition])." msgid "Return the filler clip for a transition (see [method add_transition])." msgstr "" "Devuelve el clip de relleno para una transición (véase [method " "add_transition])." msgid "" "Return the source time position for a transition (see [method " "add_transition])." msgstr "" "Devuelve la posición temporal de origen para una transición (véase [method " "add_transition])." msgid "Return the list of transitions (from, to interleaved)." msgstr "Devuelve la lista de transiciones (desde, hasta intercaladas)." msgid "" "Return the destination time position for a transition (see [method " "add_transition])." msgstr "" "Devuelve la posición temporal de destino para una transición (véase [method " "add_transition])." msgid "" "Returns [code]true[/code] if a given transition exists (was added via [method " "add_transition])." msgstr "" "Devuelve [code]true[/code] si existe una transición determinada (se agregó " "mediante [method add_transition])." msgid "" "Return whether a transition uses the [i]hold previous[/i] functionality (see " "[method add_transition])." msgstr "" "Devuelve si una transición utiliza la funcionalidad [i]mantener anterior[/i] " "(véase [method add_transition])." msgid "" "Return whether a transition uses the [i]filler clip[/i] functionality (see " "[method add_transition])." msgstr "" "Devuelve si una transición utiliza la funcionalidad [i]clip de relleno[/i] " "(véase [method add_transition])." msgid "Set whether a clip will auto-advance by changing the auto-advance mode." msgstr "" "Establecer si un clip avanzará automáticamente cambiando el modo de avance " "automático." msgid "" "Set the index of the next clip towards which this clip will auto advance to " "when finished. If the clip being played loops, then auto-advance will be " "ignored." msgstr "" "Establecer el índice del siguiente clip al que este avanzará automáticamente " "al finalizar. Si el clip se reproduce en bucle, se ignorará el avance " "automático." msgid "Set the name of the current clip (for easier identification)." msgstr "" "Establecer el nombre del clip actual (para una identificación más fácil)." msgid "Set the [AudioStream] associated with the current clip." msgstr "Establecer el [AudioStream] asociado con el clip actual." msgid "Amount of clips contained in this interactive player." msgstr "Cantidad de clips contenidos en este reproductor interactivo." msgid "" "Index of the initial clip, which will be played first when this stream is " "played." msgstr "" "Índice del clip inicial, que se reproducirá primero cuando se reproduzca esta " "transmisión." msgid "" "Start transition as soon as possible, don't wait for any specific time " "position." msgstr "" "Comenzar la transición lo antes posible, sin esperar ninguna posición " "temporal específica." msgid "Transition when the clip playback position reaches the next bar." msgstr "" "Transición cuando la posición de reproducción del clip llega a la siguiente " "barra." msgid "Transition when the current clip finished playing." msgstr "Transición cuando el clip actual terminó de reproducirse." msgid "" "Transition to the same position in the destination clip. This is useful when " "both clips have exactly the same length and the music should fade between " "them." msgstr "" "Transición a la misma posición en el clip de destino. Esto es útil cuando " "ambos clips tienen la misma duración y la música debe fundirse entre ellos." msgid "Transition to the start of the destination clip." msgstr "Transición al inicio del clip de destino." msgid "" "Do not use fade for the transition. This is useful when transitioning from a " "clip-end to clip-beginning, and each clip has their begin/end." msgstr "" "No usar el desvanecimiento para la transición. Esto es útil al pasar del " "final de un clip al principio, y cada clip tiene su inicio/fin." msgid "Use a fade-in in the next clip, let the current clip finish." msgstr "" "Utilizar un fundido de entrada en el siguiente clip y dejar que el clip " "actual termine." msgid "Use a fade-out in the current clip, the next clip will start by itself." msgstr "" "Usar un desvanecimiento en el clip actual, el siguiente clip comenzará solo." msgid "" "Use automatic fade logic depending on the transition from/to. It is " "recommended to use this by default." msgstr "" "Utilizar la lógica de desvanecimiento automático según la transición de/a. Se " "recomienda usar esta opción por defecto." msgid "Disable auto-advance (default)." msgstr "Deshabilitar el avance automático (predeterminado)." msgid "Enable auto-advance, a clip must be specified." msgstr "Habilitar el avance automático, se debe especificar un clip." msgid "" "Enable auto-advance, but instead of specifying a clip, the playback will " "return to hold (see [method add_transition])." msgstr "" "Habilitar el avance automático, pero en lugar de especificar un clip, la " "reproducción volverá al modo de espera (véase [method add_transition])." msgid "" "This constant describes that any clip is valid for a specific transition as " "either source or destination." msgstr "" "Esta constante describe que cualquier clip es válido para una transición " "específica como origen o destino." msgid "Plays real-time audio input data." msgstr "Reproduce datos de entrada de audio en tiempo real." msgid "" "When used directly in an [AudioStreamPlayer] node, [AudioStreamMicrophone] " "plays back microphone input in real-time. This can be used in conjunction " "with [AudioEffectCapture] to process the data or save it.\n" "[b]Note:[/b] [member ProjectSettings.audio/driver/enable_input] must be " "[code]true[/code] for audio input to work. See also that setting's " "description for caveats related to permissions and operating system privacy " "settings." msgstr "" "Cuando se utiliza directamente en un nodo [AudioStreamPlayer], " "[AudioStreamMicrophone] reproduce la entrada del micrófono en tiempo real. " "Esto puede usarse en conjunto con [AudioEffectCapture] para procesar los " "datos o guardarlos.\n" "[b]Nota:[/b] [member ProjectSettings.audio/driver/enable_input] debe estar en " "[code]true[/code] para que la entrada de audio funcione. Véase también la " "descripción de ese ajuste para conocer las advertencias relacionadas con los " "permisos y la configuración de privacidad del sistema operativo." msgid "Audio Mic Record Demo" msgstr "Demo de Grabación de Micrófono de Audio" msgid "MP3 audio stream driver." msgstr "Driver de transmisión de audio MP3." msgid "Runtime file loading and saving" msgstr "Carga y guardado de archivos en tiempo de ejecución" msgid "" "Creates a new [AudioStreamMP3] instance from the given buffer. The buffer " "must contain MP3 data." msgstr "" "Crea una nueva instancia de [AudioStreamMP3] a partir del búfer especificado. " "El búfer debe contener datos MP3." msgid "" "Creates a new [AudioStreamMP3] instance from the given file path. The file " "must be in MP3 format." msgstr "" "Crea una nueva instancia de [AudioStreamMP3] a partir de la ruta de archivo " "indicada. El archivo debe estar en formato MP3." msgid "" "Contains the audio data in bytes.\n" "You can load a file without having to import it beforehand using the code " "snippet below. Keep in mind that this snippet loads the whole file into " "memory and may not be ideal for huge files (hundreds of megabytes or more).\n" "[codeblocks]\n" "[gdscript]\n" "func load_mp3(path):\n" "\tvar file = FileAccess.open(path, FileAccess.READ)\n" "\tvar sound = AudioStreamMP3.new()\n" "\tsound.data = file.get_buffer(file.get_length())\n" "\treturn sound\n" "[/gdscript]\n" "[csharp]\n" "public AudioStreamMP3 LoadMP3(string path)\n" "{\n" "\tusing var file = FileAccess.Open(path, FileAccess.ModeFlags.Read);\n" "\tvar sound = new AudioStreamMP3();\n" "\tsound.Data = file.GetBuffer(file.GetLength());\n" "\treturn sound;\n" "}\n" "[/csharp]\n" "[/codeblocks]" msgstr "" "Contiene los datos de audio en bytes.\n" "Puedes cargar un archivo sin tener que importarlo de antemano utilizando el " "fragmento de código siguiente. Ten en cuenta que este fragmento carga el " "archivo completo en la memoria y puede no ser ideal para archivos enormes (de " "cientos de megabytes o más).\n" "[codeblocks]\n" "[gdscript]\n" "func load_mp3(path):\n" "\tvar file = FileAccess.open(path, FileAccess.READ)\n" "\tvar sound = AudioStreamMP3.new()\n" "\tsound.data = file.get_buffer(file.get_length())\n" "\treturn sound\n" "[/gdscript]\n" "[csharp]\n" "public AudioStreamMP3 LoadMP3(string path)\n" "{\n" "\tusing var file = FileAccess.Open(path, FileAccess.ModeFlags.Read);\n" "\tvar sound = new AudioStreamMP3();\n" "\tsound.Data = file.GetBuffer(file.GetLength());\n" "\treturn sound;\n" "}\n" "[/csharp]\n" "[/codeblocks]" msgid "Time in seconds at which the stream starts after being looped." msgstr "" "Tiempo en segundos en el que el stream comienza después de ser enlazada." msgid "A class representing an Ogg Vorbis audio stream." msgstr "Una clase que representa una secuencia de audio Ogg Vorbis." msgid "" "Creates a new [AudioStreamOggVorbis] instance from the given buffer. The " "buffer must contain Ogg Vorbis data." msgstr "" "Crea una nueva instancia de [AudioStreamOggVorbis] a partir del búfer " "especificado. El búfer debe contener datos Ogg Vorbis." msgid "" "Creates a new [AudioStreamOggVorbis] instance from the given file path. The " "file must be in Ogg Vorbis format." msgstr "" "Crea una nueva instancia de [AudioStreamOggVorbis] a partir de la ruta de " "archivo indicada. El archivo debe estar en formato Ogg Vorbis." msgid "Contains the raw Ogg data for this stream." msgstr "Contiene los datos Ogg sin procesar para esta transmisión." msgid "" "Contains user-defined tags if found in the Ogg Vorbis data.\n" "Commonly used tags include [code]title[/code], [code]artist[/code], " "[code]album[/code], [code]tracknumber[/code], and [code]date[/code] " "([code]date[/code] does not have a standard date format).\n" "[b]Note:[/b] No tag is [i]guaranteed[/i] to be present in every file, so make " "sure to account for the keys not always existing." msgstr "" "Contiene etiquetas definidas por el usuario si se encuentran en los datos de " "Ogg Vorbis.\n" "Las etiquetas utilizadas habitualmente incluyen [code]title[/code], " "[code]artist[/code], [code]album[/code], [code]tracknumber[/code] y " "[code]date[/code] ([code]date[/code] no tiene un formato de fecha estándar).\n" "[b]Nota:[/b] No se [i]garantiza[/i] que todas las etiquetas estén presentes " "en cada archivo, así que asegúrate de tener en cuenta que las claves no " "siempre existen." msgid "Meta class for playing back audio." msgstr "Meta clase para reproducir el audio." msgid "" "Can play, loop, pause a scroll through audio. See [AudioStream] and " "[AudioStreamOggVorbis] for usage." msgstr "" "Puede reproducir, loopear, pausar y desplazarse a través del audio. Véase " "[AudioStream] y [AudioStreamOggVorbis] para su uso." msgid "" "Overridable method. Should return how many times this audio stream has " "looped. Most built-in playbacks always return [code]0[/code]." msgstr "" "Método sobrescribible. Debe devolver cuántas veces se ha repetido este flujo " "de audio en bucle. La mayoría de las reproducciones integradas siempre " "devuelven [code]0[/code]." msgid "" "Return the current value of a playback parameter by name (see [method " "AudioStream._get_parameter_list])." msgstr "" "Devuelve el valor actual de un parámetro de reproducción por nombre (véase " "[method AudioStream._get_parameter_list])." msgid "" "Overridable method. Should return [code]true[/code] if this playback is " "active and playing its audio stream." msgstr "" "Método sobrescribible. Debe devolver [code]true[/code] si esta reproducción " "está activa y reproduciendo su flujo de audio." msgid "" "Override this method to customize how the audio stream is mixed. This method " "is called even if the playback is not active.\n" "[b]Note:[/b] It is not useful to override this method in GDScript or C#. Only " "GDExtension can take advantage of it." msgstr "" "Sobrescribe este método para personalizar cómo se mezcla el flujo de audio. " "Este método se llama incluso si la reproducción no está activa.\n" "[b]Nota:[/b] No es útil sobrescribir este método en GDScript o C#. Solo " "GDExtension puede aprovecharlo." msgid "" "Override this method to customize what happens when seeking this audio stream " "at the given [param position], such as by calling [method " "AudioStreamPlayer.seek]." msgstr "" "Sobrescribe este método para personalizar qué sucede al buscar una posición " "en este flujo de audio en la [param position] dada, como por ejemplo llamando " "a [method AudioStreamPlayer.seek]." msgid "" "Set the current value of a playback parameter by name (see [method " "AudioStream._get_parameter_list])." msgstr "" "Establece el valor actual de un parámetro de reproducción por su nombre (ver " "[method AudioStream._get_parameter_list])." msgid "" "Override this method to customize what happens when the playback starts at " "the given position, such as by calling [method AudioStreamPlayer.play]." msgstr "" "Sobrescribe este método para personalizar lo que ocurre cuando la " "reproducción comienza en la posición indicada, por ejemplo, al llamar a " "[method AudioStreamPlayer.play]." msgid "" "Override this method to customize what happens when the playback is stopped, " "such as by calling [method AudioStreamPlayer.stop]." msgstr "" "Sobrescriba este método para personalizar lo que sucede cuando se detiene la " "reproducción, como por ejemplo al llamar a [method AudioStreamPlayer.stop]." msgid "" "Overridable method. Called whenever the audio stream is mixed if the playback " "is active and [method AudioServer.set_enable_tagging_used_audio_streams] has " "been set to [code]true[/code]. Editor plugins may use this method to \"tag\" " "the current position along the audio stream and display it in a preview." msgstr "" "Método que se puede sobrescribir. Se llama siempre que se mezcla el flujo de " "audio si la reproducción está activa y [method " "AudioServer.set_enable_tagging_used_audio_streams] se ha establecido en " "[code]true[/code]. Los complementos del editor pueden usar este método para " "\"marcar\" la posición actual a lo largo del flujo de audio y mostrarla en " "una vista previa." msgid "" "Mixes up to [param frames] of audio from the stream from the current " "position, at a rate of [param rate_scale], advancing the stream.\n" "Returns a [PackedVector2Array] where each element holds the left and right " "channel volume levels of each frame.\n" "[b]Note:[/b] Can return fewer frames than requested, make sure to use the " "size of the return value." msgstr "" "Mezcla hasta [param frames] de audio del flujo desde la posición actual, a " "una velocidad de [param rate_scale], avanzando el flujo.\n" "Devuelve un [PackedVector2Array] donde cada elemento contiene los niveles de " "volumen de los canales izquierdo y derecho de cada frame.\n" "[b]Nota:[/b] Puede devolver menos frames de los solicitados; asegúrate de " "usar el tamaño del valor devuelto." msgid "Starts the stream from the given [param from_pos], in seconds." msgstr "Inicia la transmisión desde la [param from_pos] dada, en segundos." msgid "Stops the stream." msgstr "Detiene la transmisión." msgid "Playback component of [AudioStreamInteractive]." msgstr "Componente de reproducción de [AudioStreamInteractive]." msgid "" "Playback component of [AudioStreamInteractive]. Contains functions to change " "the currently played clip." msgstr "" "Componente de reproducción de [AudioStreamInteractive]. Contiene funciones " "para cambiar el clip que se está reproduciendo actualmente." msgid "" "Return the index of the currently playing clip. You can use this to get the " "name of the currently playing clip with [method " "AudioStreamInteractive.get_clip_name].\n" "[b]Example:[/b] Get the currently playing clip name from inside an " "[AudioStreamPlayer] node.\n" "[codeblocks]\n" "[gdscript]\n" "var playing_clip_name = " "stream.get_clip_name(get_stream_playback().get_current_clip_index())\n" "[/gdscript]\n" "[/codeblocks]" msgstr "" "Devuelve el índice del clip que se está reproduciendo actualmente. Puedes " "usarlo para obtener el nombre del clip en reproducción con [method " "AudioStreamInteractive.get_clip_name].\n" "[b]Ejemplo:[/b] Obtener el nombre del clip que se está reproduciendo desde un " "nodo [AudioStreamPlayer].\n" "[codeblocks]\n" "[gdscript]\n" "var playing_clip_name = " "stream.get_clip_name(get_stream_playback().get_current_clip_index())\n" "[/gdscript]\n" "[/codeblocks]" msgid "Switch to a clip (by index)." msgstr "Cambiar a un clip (por índice)." msgid "Switch to a clip (by name)." msgstr "Cambiar a un clip (por nombre)." msgid "Playback class used for [AudioStreamPlaylist]." msgstr "Clase de reproducción utilizada para [AudioStreamPlaylist]." msgid "Playback instance for [AudioStreamPolyphonic]." msgstr "Instancia de reproducción para [AudioStreamPolyphonic]." msgid "" "Playback instance for [AudioStreamPolyphonic]. After setting the " "[code]stream[/code] property of [AudioStreamPlayer], [AudioStreamPlayer2D], " "or [AudioStreamPlayer3D], the playback instance can be obtained by calling " "[method AudioStreamPlayer.get_stream_playback], [method " "AudioStreamPlayer2D.get_stream_playback] or [method " "AudioStreamPlayer3D.get_stream_playback] methods." msgstr "" "Instancia de reproducción para [AudioStreamPolyphonic]. Después de establecer " "la propiedad [code]stream[/code] de [AudioStreamPlayer], " "[AudioStreamPlayer2D] o [AudioStreamPlayer3D], la instancia de reproducción " "puede obtenerse llamando a los métodos [method " "AudioStreamPlayer.get_stream_playback], [method " "AudioStreamPlayer2D.get_stream_playback] o [method " "AudioStreamPlayer3D.get_stream_playback]." msgid "" "Play an [AudioStream] at a given offset, volume, pitch scale, playback type, " "and bus. Playback starts immediately.\n" "The return value is a unique integer ID that is associated to this playback " "stream and which can be used to control it.\n" "This ID becomes invalid when the stream ends (if it does not loop), when the " "[AudioStreamPlaybackPolyphonic] is stopped, or when [method stop_stream] is " "called.\n" "This function returns [constant INVALID_ID] if the amount of streams " "currently playing equals [member AudioStreamPolyphonic.polyphony]. If you " "need a higher amount of maximum polyphony, raise this value." msgstr "" "Reproduce un [AudioStream] con un desplazamiento inicial, volumen, escala de " "tono, tipo de reproducción y bus determinados. La reproducción comienza de " "inmediato.\n" "El valor devuelto es un ID entero único asociado a esta reproducción, que " "puede usarse para controlarla.\n" "Este ID se vuelve inválido cuando el flujo termina (si no está en bucle), " "cuando se detiene el [AudioStreamPlaybackPolyphonic], o cuando se llama a " "[method stop_stream].\n" "Esta función devuelve [constant INVALID_ID] si la cantidad de flujos " "actualmente en reproducción alcanza [member AudioStreamPolyphonic.polyphony]. " "Si necesitas una mayor polifonía máxima, incrementa este valor." msgid "" "Change the stream pitch scale. The [param stream] argument is an integer ID " "returned by [method play_stream]." msgstr "" "Cambia la escala del tono del flujo. El argumento [param stream] es un ID " "entero devuelto por [method play_stream]." msgid "" "Change the stream volume (in db). The [param stream] argument is an integer " "ID returned by [method play_stream]." msgstr "" "Cambia el volumen del flujo (en dB). El argumento [param stream] es un ID " "entero devuelto por [method play_stream]." msgid "" "Stop a stream. The [param stream] argument is an integer ID returned by " "[method play_stream], which becomes invalid after calling this function." msgstr "" "Detiene un flujo. El argumento [param stream] es un ID entero devuelto por " "[method play_stream], que se vuelve inválido después de llamar a esta función." msgid "" "Returned by [method play_stream] in case it could not allocate a stream for " "playback." msgstr "" "Devuelto por [method play_stream] en caso de que no se pudiera asignar un " "flujo para la reproducción." msgid "A node for audio playback." msgstr "Un nodo para la reproducción de audio." msgid "" "The [AudioStreamPlayer] node plays an audio stream non-positionally. It is " "ideal for user interfaces, menus, or background music.\n" "To use this node, [member stream] needs to be set to a valid [AudioStream] " "resource. Playing more than one sound at the same time is also supported, see " "[member max_polyphony].\n" "If you need to play audio at a specific position, use [AudioStreamPlayer2D] " "or [AudioStreamPlayer3D] instead." msgstr "" "El nodo [AudioStreamPlayer] reproduce un flujo de audio de forma no " "posicional. Es ideal para interfaces de usuario, menús o música de fondo.\n" "Para usar este nodo, la propiedad [member stream] debe establecerse en un " "recurso válido de tipo [AudioStream]. También se admite reproducir más de un " "sonido al mismo tiempo; véase [member max_polyphony].\n" "Si necesitas reproducir audio en una posición específica, utiliza " "[AudioStreamPlayer2D] o [AudioStreamPlayer3D] en su lugar." msgid "" "Returns the position in the [AudioStream] of the latest sound, in seconds. " "Returns [code]0.0[/code] if no sounds are playing.\n" "[b]Note:[/b] The position is not always accurate, as the [AudioServer] does " "not mix audio every processed frame. To get more accurate results, add " "[method AudioServer.get_time_since_last_mix] to the returned position.\n" "[b]Note:[/b] This method always returns [code]0.0[/code] if the [member " "stream] is an [AudioStreamInteractive], since it can have multiple clips " "playing at once." msgstr "" "Devuelve la posición, en segundos, del último sonido reproducido en el " "[AudioStream]. Devuelve [code]0.0[/code] si no se está reproduciendo ningún " "sonido.\n" "[b]Nota:[/b] La posición no siempre es precisa, ya que el [AudioServer] no " "mezcla el audio en cada frame procesado. Para obtener resultados más exactos, " "suma [method AudioServer.get_time_since_last_mix] a la posición devuelta.\n" "[b]Nota:[/b] Este método siempre devuelve [code]0.0[/code] si [member stream] " "es un [AudioStreamInteractive], ya que puede tener varios clips " "reproduciéndose simultáneamente." msgid "" "Returns the latest [AudioStreamPlayback] of this node, usually the most " "recently created by [method play]. If no sounds are playing, this method " "fails and returns an empty playback." msgstr "" "Devuelve el [AudioStreamPlayback] más reciente de este nodo, generalmente el " "creado más recientemente por [method play]. Si no se está reproduciendo " "ningún sonido, este método falla y devuelve una instancia de reproducción " "vacía." msgid "" "Returns [code]true[/code] if any sound is active, even if [member " "stream_paused] is set to [code]true[/code]. See also [member playing] and " "[method get_stream_playback]." msgstr "" "Devuelve [code]true[/code] si hay algún sonido activo, incluso si [member " "stream_paused] está establecido en [code]true[/code]. Consulte también " "[member playing] y [method get_stream_playback]." msgid "" "Plays a sound from the beginning, or the given [param from_position] in " "seconds." msgstr "" "Reproduce un sonido desde el principio, o desde la [param from_position] dada " "en segundos." msgid "" "Restarts all sounds to be played from the given [param to_position], in " "seconds. Does nothing if no sounds are playing." msgstr "" "Reinicia todos los sonidos que se reproducirán desde el [param to_position] " "indicado, en segundos. No hace nada si no se reproduce ningún sonido." msgid "" "The target bus name. All sounds from this node will be playing on this bus.\n" "[b]Note:[/b] At runtime, if no bus with the given name exists, all sounds " "will fall back on [code]\"Master\"[/code]. See also [method " "AudioServer.get_bus_name]." msgstr "" "El nombre del bus de destino. Todos los sonidos de este nodo se reproducirán " "en este bus.\n" "[b]Nota:[/b] En tiempo de ejecución, si no existe un bus con el nombre " "indicado, todos los sonidos se reproducirán en [code]\"Master\"[/code]. Véase " "también [method AudioServer.get_bus_name]." msgid "" "The maximum number of sounds this node can play at the same time. Calling " "[method play] after this value is reached will cut off the oldest sounds." msgstr "" "El número máximo de sonidos que este nodo puede reproducir simultáneamente. " "Al llamar a [method play] después de alcanzar este valor, se eliminarán los " "sonidos más antiguos." msgid "" "The mix target channels. Has no effect when two speakers or less are detected " "(see [enum AudioServer.SpeakerMode])." msgstr "" "Los canales de destino de la mezcla. No tiene efecto cuando se detectan dos " "altavoces o menos (ver [enum AudioServer.SpeakerMode])." msgid "" "The audio's pitch and tempo, as a multiplier of the [member stream]'s sample " "rate. A value of [code]2.0[/code] doubles the audio's pitch, while a value of " "[code]0.5[/code] halves the pitch." msgstr "" "El tono y tempo del audio, como un multiplicador de la frecuencia de muestreo " "de [member stream]. Un valor de [code]2.0[/code] duplica el tono del audio, " "mientras que un valor de [code]0.5[/code] lo reduce a la mitad." msgid "" "The playback type of the stream player. If set other than to the default " "value, it will force that playback type." msgstr "" "El tipo de reproducción del reproductor de flujo. Si se establece un valor " "distinto al predeterminado, se forzará ese tipo de reproducción." msgid "" "The [AudioStream] resource to be played. Setting this property stops all " "currently playing sounds. If left empty, the [AudioStreamPlayer] does not " "work." msgstr "" "El recurso [AudioStream] que se reproducirá. Al configurar esta propiedad, se " "detendrán todos los sonidos que se estén reproduciendo. Si se deja vacía, " "[AudioStreamPlayer] no funcionará." msgid "" "If [code]true[/code], the sounds are paused. Setting [member stream_paused] " "to [code]false[/code] resumes all sounds.\n" "[b]Note:[/b] This property is automatically changed when exiting or entering " "the tree, or this node is paused (see [member Node.process_mode])." msgstr "" "Si es [code]true[/code], los sonidos se pausan. Configurar [member " "stream_paused] a [code]false[/code] reanuda todos los sonidos.\n" "[b]Nota:[/b] Esta propiedad se modifica automáticamente al salir o entrar en " "el árbol, o cuando este nodo se pausa (ver [member Node.process_mode])." msgid "" "Volume of sound, in decibels. This is an offset of the [member stream]'s " "volume.\n" "[b]Note:[/b] To convert between decibel and linear energy (like most volume " "sliders do), use [member volume_linear], or [method " "@GlobalScope.db_to_linear] and [method @GlobalScope.linear_to_db]." msgstr "" "Volumen del sonido, en decibeles. Esto es un desplazamiento respecto al " "volumen de [member stream].\n" "[b]Nota:[/b] Para convertir entre decibeles y energía lineal (como hacen la " "mayoría de los deslizadores de volumen), utiliza [member volume_linear], o " "[method @GlobalScope.db_to_linear] y [method @GlobalScope.linear_to_db]." msgid "" "Volume of sound, as a linear value.\n" "[b]Note:[/b] This member modifies [member volume_db] for convenience. The " "returned value is equivalent to the result of [method " "@GlobalScope.db_to_linear] on [member volume_db]. Setting this member is " "equivalent to setting [member volume_db] to the result of [method " "@GlobalScope.linear_to_db] on a value." msgstr "" "Volumen del sonido, como un valor lineal.\n" "[b]Nota:[/b] Este miembro modifica [member volume_db] por conveniencia. El " "valor devuelto es equivalente al resultado de [method " "@GlobalScope.db_to_linear] sobre [member volume_db]. Establecer este miembro " "es equivalente a establecer [member volume_db] al resultado de [method " "@GlobalScope.linear_to_db] sobre un valor." msgid "" "Emitted when a sound finishes playing without interruptions. This signal is " "[i]not[/i] emitted when calling [method stop], or when exiting the tree while " "sounds are playing." msgstr "" "Emitida cuando un sonido termina de reproducirse sin interrupciones. Esta " "señal [i]no[/i] se emite al llamar a [method stop], o al salir del árbol " "mientras los sonidos se están reproduciendo." msgid "The audio will be played only on the first channel. This is the default." msgstr "" "El audio se reproducirá solo en el primer canal. Este es el comportamiento " "predeterminado." msgid "The audio will be played on all surround channels." msgstr "El audio se reproducirá en todos los canales de sonido envolvente." msgid "" "The audio will be played on the second channel, which is usually the center." msgstr "" "El audio se reproducirá en el segundo canal, que suele ser el del centro." msgid "Plays positional sound in 2D space." msgstr "Reproduce sonido posicional en el espacio 2D." msgid "" "Plays audio that is attenuated with distance to the listener.\n" "By default, audio is heard from the screen center. This can be changed by " "adding an [AudioListener2D] node to the scene and enabling it by calling " "[method AudioListener2D.make_current] on it.\n" "See also [AudioStreamPlayer] to play a sound non-positionally.\n" "[b]Note:[/b] Hiding an [AudioStreamPlayer2D] node does not disable its audio " "output. To temporarily disable an [AudioStreamPlayer2D]'s audio output, set " "[member volume_db] to a very low value like [code]-100[/code] (which isn't " "audible to human hearing)." msgstr "" "Reproduce audio que se atenúa según la distancia al oyente.\n" "Por defecto, el audio se escucha desde el centro de la pantalla. Esto se " "puede cambiar agregando un nodo [AudioListener2D] a la escena y activándolo " "llamando a [method AudioListener2D.make_current].\n" "Véase también [AudioStreamPlayer] para reproducir un sonido sin " "posicionamiento.\n" "[b]Nota:[/b] Ocultar un nodo [AudioStreamPlayer2D] no desactiva su salida de " "audio. Para desactivar temporalmente el audio de un [AudioStreamPlayer2D], " "establece [member volume_db] a un valor muy bajo como [code]-100[/code] (que " "no es audible para el oído humano)." msgid "Returns the position in the [AudioStream]." msgstr "Devuelve la posición en el [AudioStream]." msgid "" "Returns the [AudioStreamPlayback] object associated with this " "[AudioStreamPlayer2D]." msgstr "" "Devuelve el objeto [AudioStreamPlayback] asociado a este " "[AudioStreamPlayer2D]." msgid "" "Queues the audio to play on the next physics frame, from the given position " "[param from_position], in seconds." msgstr "" "Pone el audio en cola para reproducirse en el siguiente cuadro de física, " "desde la posición dada [param from_position], en segundos." msgid "Sets the position from which audio will be played, in seconds." msgstr "" "Establece la posición desde la que se reproducirá el audio, en segundos." msgid "Stops the audio." msgstr "Detiene el audio." msgid "" "Determines which [Area2D] layers affect the sound for reverb and audio bus " "effects. Areas can be used to redirect [AudioStream]s so that they play in a " "certain audio bus. An example of how you might use this is making a \"water\" " "area so that sounds played in the water are redirected through an audio bus " "to make them sound like they are being played underwater." msgstr "" "Determina qué capas de [Area2D] afectan el sonido para la reverberación y los " "efectos del bus de audio. Las áreas pueden usarse para redirigir " "[AudioStream]s de manera que se reproduzcan en un bus de audio específico. Un " "ejemplo de uso sería crear un área de \"agua\" para que los sonidos " "reproducidos dentro del agua se redirijan a través de un bus de audio, " "haciendo que suenen como si se reprodujeran bajo el agua." msgid "If [code]true[/code], audio plays when added to scene tree." msgstr "" "Si es [code]true[/code], el audio se reproduce cuando se añade al árbol de " "escenas." msgid "" "Bus on which this audio is playing.\n" "[b]Note:[/b] When setting this property, keep in mind that no validation is " "performed to see if the given name matches an existing bus. This is because " "audio bus layouts might be loaded after this property is set. If this given " "name can't be resolved at runtime, it will fall back to [code]\"Master\"[/" "code]." msgstr "" "Bus en el que se está reproduciendo este audio.\n" "[b]Nota:[/b] Al establecer esta propiedad, ten en cuenta que no se realiza " "ninguna validación para verificar si el nombre proporcionado coincide con un " "bus existente. Esto se debe a que los diseños de buses de audio podrían " "cargarse después de que se haya establecido esta propiedad. Si el nombre " "proporcionado no se puede resolver en tiempo de ejecución, se usará como " "valor predeterminado [code]\"Master\"[/code]." msgid "Maximum distance from which audio is still hearable." msgstr "Distancia máxima desde la que se puede oír el audio." msgid "" "The maximum number of sounds this node can play at the same time. Playing " "additional sounds after this value is reached will cut off the oldest sounds." msgstr "" "El número máximo de sonidos que este nodo puede reproducir simultáneamente. " "Reproducir sonidos adicionales después de alcanzar este límite hará que se " "corten los sonidos más antiguos." msgid "" "Scales the panning strength for this node by multiplying the base [member " "ProjectSettings.audio/general/2d_panning_strength] with this factor. Higher " "values will pan audio from left to right more dramatically than lower values." msgstr "" "Escala la intensidad del paneo de este nodo multiplicando el valor base de " "[member ProjectSettings.audio/general/2d_panning_strength] por este factor. " "Valores más altos harán que el audio se panee de izquierda a derecha de " "manera más pronunciada que los valores bajos." msgid "" "The pitch and the tempo of the audio, as a multiplier of the audio sample's " "sample rate." msgstr "" "El tono y el tempo del audio, como multiplicador de la tasa de muestreo de la " "muestra de audio." msgid "The [AudioStream] object to be played." msgstr "El objeto [AudioStream] que se va a reproducir." msgid "" "If [code]true[/code], the playback is paused. You can resume it by setting " "[member stream_paused] to [code]false[/code]." msgstr "" "Si es [code]true[/code], la reproducción se pausa. Puede reanudarla " "estableciendo [member stream_paused] en [code]false[/code]." msgid "" "Base volume before attenuation, as a linear value.\n" "[b]Note:[/b] This member modifies [member volume_db] for convenience. The " "returned value is equivalent to the result of [method " "@GlobalScope.db_to_linear] on [member volume_db]. Setting this member is " "equivalent to setting [member volume_db] to the result of [method " "@GlobalScope.linear_to_db] on a value." msgstr "" "Volumen base antes de la atenuación, como un valor lineal.\n" "[b]Nota:[/b] Este miembro modifica [member volume_db] por conveniencia. El " "valor devuelto es equivalente al resultado de [method " "@GlobalScope.db_to_linear] aplicado a [member volume_db]. Configurar este " "miembro es equivalente a establecer [member volume_db] al resultado de " "[method @GlobalScope.linear_to_db] aplicado a un valor." msgid "Emitted when the audio stops playing." msgstr "Emitida cuando el audio deja de reproducirse." msgid "" "Plays audio with positional sound effects, based on the relative position of " "the audio listener. Positional effects include distance attenuation, " "directionality, and the Doppler effect. For greater realism, a low-pass " "filter is applied to distant sounds. This can be disabled by setting [member " "attenuation_filter_cutoff_hz] to [code]20500[/code].\n" "By default, audio is heard from the camera position. This can be changed by " "adding an [AudioListener3D] node to the scene and enabling it by calling " "[method AudioListener3D.make_current] on it.\n" "See also [AudioStreamPlayer] to play a sound non-positionally.\n" "[b]Note:[/b] Hiding an [AudioStreamPlayer3D] node does not disable its audio " "output. To temporarily disable an [AudioStreamPlayer3D]'s audio output, set " "[member volume_db] to a very low value like [code]-100[/code] (which isn't " "audible to human hearing)." msgstr "" "Reproduce audio con efectos de sonido posicionales, basados en la posición " "relativa del oyente de audio. Los efectos posicionales incluyen atenuación " "por distancia, direccionalidad y efecto Doppler. Para mayor realismo, se " "aplica un filtro pasa-bajos a los sonidos distantes. Esto se puede desactivar " "estableciendo [member attenuation_filter_cutoff_hz] en [code]20500[/code].\n" "Por defecto, el audio se escucha desde la posición de la cámara. Esto se " "puede cambiar agregando un nodo [AudioListener3D] a la escena y activándolo " "llamando a [method AudioListener3D.make_current].\n" "Véase también [AudioStreamPlayer] para reproducir un sonido sin " "posicionamiento.\n" "[b]Nota:[/b] Ocultar un nodo [AudioStreamPlayer3D] no desactiva su salida de " "audio. Para desactivar temporalmente el audio de un [AudioStreamPlayer3D], " "establece [member volume_db] a un valor muy bajo como [code]-100[/code] (que " "no es audible para el oído humano)." msgid "" "Returns the [AudioStreamPlayback] object associated with this " "[AudioStreamPlayer3D]." msgstr "" "Devuelve el objeto [AudioStreamPlayback] asociado a este " "[AudioStreamPlayer3D]." msgid "" "Determines which [Area3D] layers affect the sound for reverb and audio bus " "effects. Areas can be used to redirect [AudioStream]s so that they play in a " "certain audio bus. An example of how you might use this is making a \"water\" " "area so that sounds played in the water are redirected through an audio bus " "to make them sound like they are being played underwater." msgstr "" "Determina qué capas de [Area3D] afectan el sonido para la reverberación y los " "efectos del bus de audio. Las áreas pueden usarse para redirigir " "[AudioStream]s para que se reproduzcan en un bus de audio determinado. Un " "ejemplo de cómo podrías usar esto es creando un área de \"agua\" para que los " "sonidos reproducidos en el agua sean redirigidos a través de un bus de audio " "para hacer que suenen como si se estuvieran reproduciendo bajo el agua." msgid "" "The cutoff frequency of the attenuation low-pass filter, in Hz. A sound above " "this frequency is attenuated more than a sound below this frequency. To " "disable this effect, set this to [code]20500[/code] as this frequency is " "above the human hearing limit." msgstr "" "La frecuencia de corte del filtro de paso bajo de atenuación, en Hz. Un " "sonido por encima de esta frecuencia se atenúa más que un sonido por debajo " "de esta frecuencia. Para deshabilitar este efecto, establece esto en " "[code]20500[/code], ya que esta frecuencia está por encima del límite de " "audición humana." msgid "Amount how much the filter affects the loudness, in decibels." msgstr "Cantidad en que el filtro afecta el volumen, en decibelios." msgid "" "Decides if audio should get quieter with distance linearly, quadratically, " "logarithmically, or not be affected by distance, effectively disabling " "attenuation." msgstr "" "Decide si el audio debe ser más silencioso con la distancia lineal, " "cuadrática, logarítmica, o no ser afectado por la distancia, desactivando " "efectivamente la atenuación." msgid "" "If [code]true[/code], audio plays when the AudioStreamPlayer3D node is added " "to scene tree." msgstr "" "Si es [code]true[/code], el audio se reproduce cuando el nodo " "AudioStreamPlayer3D se añade al árbol de escenas." msgid "" "The bus on which this audio is playing.\n" "[b]Note:[/b] When setting this property, keep in mind that no validation is " "performed to see if the given name matches an existing bus. This is because " "audio bus layouts might be loaded after this property is set. If this given " "name can't be resolved at runtime, it will fall back to [code]\"Master\"[/" "code]." msgstr "" "El bus en el que se está reproduciendo este audio.\n" "[b]Nota:[/b] Al establecer esta propiedad, ten en cuenta que no se realiza " "ninguna validación para comprobar si el nombre dado coincide con un bus " "existente. Esto se debe a que las configuraciones de los buses de audio " "podrían cargarse después de que se establezca esta propiedad. Si este nombre " "dado no puede resolverse en tiempo de ejecución, se recurrirá a [code]" "\"Master\"[/code]." msgid "" "Decides in which step the Doppler effect should be calculated.\n" "[b]Note:[/b] If [member doppler_tracking] is not [constant " "DOPPLER_TRACKING_DISABLED] but the current [Camera3D]/[AudioListener3D] has " "doppler tracking disabled, the Doppler effect will be heard but will not take " "the movement of the current listener into account. If accurate Doppler effect " "is desired, doppler tracking should be enabled on both the " "[AudioStreamPlayer3D] and the current [Camera3D]/[AudioListener3D]." msgstr "" "Decide en qué paso se debe calcular el efecto Doppler.\n" "[b]Nota:[/b] Si [member doppler_tracking] no es [constant " "DOPPLER_TRACKING_DISABLED] pero el [Camera3D]/[AudioListener3D] actual tiene " "el seguimiento Doppler deshabilitado, el efecto Doppler se escuchará pero no " "tendrá en cuenta el movimiento del oyente actual. Si se desea un efecto " "Doppler preciso, el seguimiento Doppler debe estar habilitado tanto en el " "[AudioStreamPlayer3D] como en el [Camera3D]/[AudioListener3D] actual." msgid "The angle in which the audio reaches a listener unattenuated." msgstr "El ángulo en el que el audio llega a un oyente sin atenuarse." msgid "" "If [code]true[/code], the audio should be attenuated according to the " "direction of the sound." msgstr "" "Si es [code]true[/code], el audio debe atenuarse según la dirección del " "sonido." msgid "" "Attenuation factor used if listener is outside of [member " "emission_angle_degrees] and [member emission_angle_enabled] is set, in " "decibels." msgstr "" "Factor de atenuación utilizado si el oyente está fuera de [member " "emission_angle_degrees] y [member emission_angle_enabled] está habilitado, en " "decibelios." msgid "Sets the absolute maximum of the sound level, in decibels." msgstr "Establece el máximo absoluto del nivel de sonido, en decibelios." msgid "" "The distance past which the sound can no longer be heard at all. Only has an " "effect if set to a value greater than [code]0.0[/code]. [member max_distance] " "works in tandem with [member unit_size]. However, unlike [member unit_size] " "whose behavior depends on the [member attenuation_model], [member " "max_distance] always works in a linear fashion. This can be used to prevent " "the [AudioStreamPlayer3D] from requiring audio mixing when the listener is " "far away, which saves CPU resources." msgstr "" "La distancia a partir de la cual el sonido ya no se puede escuchar en " "absoluto. Solo tiene efecto si se establece a un valor mayor que [code]0.0[/" "code]. [member max_distance] funciona en conjunto con [member unit_size]. Sin " "embargo, a diferencia de [member unit_size] cuyo comportamiento depende del " "[member attenuation_model], [member max_distance] siempre funciona de forma " "lineal. Esto se puede usar para evitar que el [AudioStreamPlayer3D] requiera " "mezcla de audio cuando el oyente está lejos, lo que ahorra recursos de la CPU." msgid "" "Scales the panning strength for this node by multiplying the base [member " "ProjectSettings.audio/general/3d_panning_strength] by this factor. If the " "product is [code]0.0[/code] then stereo panning is disabled and the volume is " "the same for all channels. If the product is [code]1.0[/code] then one of the " "channels will be muted when the sound is located exactly to the left (or " "right) of the listener.\n" "Two speaker stereo arrangements implement the [url=https://webaudio.github.io/" "web-audio-api/#stereopanner-algorithm]WebAudio standard for StereoPannerNode " "Panning[/url] where the volume is cosine of half the azimuth angle to the " "ear.\n" "For other speaker arrangements such as the 5.1 and 7.1 the SPCAP (Speaker-" "Placement Correction Amplitude) algorithm is implemented." msgstr "" "Escala la fuerza de paneo para este nodo multiplicando la base [member " "ProjectSettings.audio/general/3d_panning_strength] por este factor. Si el " "producto es [code]0.0[/code], entonces el paneo estéreo está desactivado y el " "volumen es el mismo para todos los canales. Si el producto es [code]1.0[/" "code], entonces uno de los canales se silenciará cuando el sonido se " "encuentre exactamente a la izquierda (o a la derecha) del oyente.\n" "Las disposiciones estéreo de dos altavoces implementan el [url=https://" "webaudio.github.io/web-audio-api/#stereopanner-algorithm]Estándar WebAudio " "para StereoPannerNode Panning[/url] donde el volumen es el coseno de la mitad " "del ángulo de acimut al oído.\n" "Para otras disposiciones de altavoces, como el 5.1 y el 7.1, se implementa el " "algoritmo SPCAP (Speaker-Placement Correction Amplitude)." msgid "The [AudioStream] resource to be played." msgstr "El recurso [AudioStream] que se va a reproducir." msgid "" "The factor for the attenuation effect. Higher values make the sound audible " "over a larger distance." msgstr "" "El factor para el efecto de atenuación. Valores más altos hacen que el sonido " "sea escuchado a mayor distancia." msgid "The base sound level before attenuation, in decibels." msgstr "El nivel de sonido base antes de la atenuación, en decibelios." msgid "" "The base sound level before attenuation, as a linear value.\n" "[b]Note:[/b] This member modifies [member volume_db] for convenience. The " "returned value is equivalent to the result of [method " "@GlobalScope.db_to_linear] on [member volume_db]. Setting this member is " "equivalent to setting [member volume_db] to the result of [method " "@GlobalScope.linear_to_db] on a value." msgstr "" "El nivel de sonido base antes de la atenuación, como un valor lineal.\n" "[b]Nota:[/b] Este miembro modifica [member volume_db] para mayor comodidad. " "El valor devuelto es equivalente al resultado de [method " "@GlobalScope.db_to_linear] en [member volume_db]. Establecer este miembro es " "equivalente a establecer [member volume_db] al resultado de [method " "@GlobalScope.linear_to_db] en un valor." msgid "Attenuation of loudness according to linear distance." msgstr "Atenuación de la sonoridad según la distancia lineal." msgid "Attenuation of loudness according to squared distance." msgstr "Atenuación de la sonoridad según la distancia al cuadrado." msgid "Attenuation of loudness according to logarithmic distance." msgstr "Atenuación de la sonoridad según la distancia logarítmica." msgid "" "No attenuation of loudness according to distance. The sound will still be " "heard positionally, unlike an [AudioStreamPlayer]. [constant " "ATTENUATION_DISABLED] can be combined with a [member max_distance] value " "greater than [code]0.0[/code] to achieve linear attenuation clamped to a " "sphere of a defined size." msgstr "" "Sin atenuación de la sonoridad según la distancia. El sonido seguirá oyéndose " "posicionalmente, a diferencia de un [AudioStreamPlayer]. [constant " "ATTENUATION_DISABLED] se puede combinar con un valor de [member max_distance] " "mayor que [code]0.0[/code] para lograr una atenuación lineal sujeta a una " "esfera de un tamaño definido." msgid "Disables doppler tracking." msgstr "Desactiva el rastreo doppler." msgid "" "Executes doppler tracking during process frames (see [constant " "Node.NOTIFICATION_INTERNAL_PROCESS])." msgstr "" "Ejecuta el seguimiento Doppler durante los fotogramas del proceso (véase " "[constant Node.NOTIFICATION_INTERNAL_PROCESS])." msgid "" "Executes doppler tracking during physics frames (see [constant " "Node.NOTIFICATION_INTERNAL_PHYSICS_PROCESS])." msgstr "" "Ejecuta el seguimiento Doppler durante los fotogramas de la física (véase " "[constant Node.NOTIFICATION_INTERNAL_PHYSICS_PROCESS])." msgid "" "Returns the BPM of the playlist, which can vary depending on the clip being " "played." msgstr "" "Devuelve el BPM de la lista de reproducción, que puede variar dependiendo del " "clip que se esté reproduciendo." msgid "Returns the stream at playback position index." msgstr "Devuelve la transmisión en el índice de la posición de reproducción." msgid "Sets the stream at playback position index." msgstr "Establece la transmisión en el índice de la posición de reproducción." msgid "" "Fade time used when a stream ends, when going to the next one. Streams are " "expected to have an extra bit of audio after the end to help with fading." msgstr "" "Tiempo de fundido usado cuando una transmisión termina, al pasar al " "siguiente. Se espera que las transmisiones tengan un poco de audio extra " "después del final para ayudar con el fundido." msgid "" "If [code]true[/code], the playlist will loop, otherwise the playlist will end " "when the last stream is finished." msgstr "" "Si es [code]true[/code], la lista de reproducción se repetirá en bucle. De lo " "contrario, la lista de reproducción terminará cuando finalice el último " "stream." msgid "" "If [code]true[/code], the playlist will shuffle each time playback starts and " "each time it loops." msgstr "" "Si es [code]true[/code], la lista de reproducción se barajará cada vez que " "comience la reproducción y cada vez que se repita." msgid "Amount of streams in the playlist." msgstr "Cantidad de transmisiones en la lista de reproducción." msgid "Maximum amount of streams supported in the playlist." msgstr "" "Cantidad máxima de transmisiones soportados en la lista de reproducción." msgid "" "AudioStream that lets the user play custom streams at any time from code, " "simultaneously using a single player." msgstr "" "AudioStream que permite al usuario reproducir streams personalizados en " "cualquier momento desde el código, simultáneamente usando un único " "reproductor." msgid "" "AudioStream that lets the user play custom streams at any time from code, " "simultaneously using a single player.\n" "Playback control is done via the [AudioStreamPlaybackPolyphonic] instance set " "inside the player, which can be obtained via [method " "AudioStreamPlayer.get_stream_playback], [method " "AudioStreamPlayer2D.get_stream_playback] or [method " "AudioStreamPlayer3D.get_stream_playback] methods. Obtaining the playback " "instance is only valid after the [code]stream[/code] property is set as an " "[AudioStreamPolyphonic] in those players." msgstr "" "Un AudioStream que permite al usuario reproducir streams personalizados en " "cualquier momento desde el código, de forma simultánea y usando un único " "reproductor.\n" "El control de la reproducción se realiza a través de la instancia " "[AudioStreamPlaybackPolyphonic] establecida dentro del reproductor, la cual " "se puede obtener mediante los métodos [method " "AudioStreamPlayer.get_stream_playback], [method " "AudioStreamPlayer2D.get_stream_playback] o [method " "AudioStreamPlayer3D.get_stream_playback]. La obtención de la instancia de " "reproducción solo es válida después de que la propiedad [code]stream[/code] " "se haya establecido como un [AudioStreamPolyphonic] en dichos reproductores." msgid "Maximum amount of simultaneous streams that can be played." msgstr "Cantidad máxima de transmisiones simultáneas que se pueden reproducir." msgid "Wraps a pool of audio streams with pitch and volume shifting." msgstr "" "Envuelve un grupo de transmisiones de audio con cambio de tono y volumen." msgid "" "Picks a random AudioStream from the pool, depending on the playback mode, and " "applies random pitch shifting and volume shifting during playback." msgstr "" "Elige un AudioStream aleatorio del grupo, dependiendo del modo de " "reproducción, y aplica cambios aleatorios de tono y volumen durante la " "reproducción." msgid "" "Insert a stream at the specified index. If the index is less than zero, the " "insertion occurs at the end of the underlying pool." msgstr "" "Inserta una transmisión en el índice especificado. Si el índice es menor que " "cero, la inserción se produce al final del grupo subyacente." msgid "Returns the stream at the specified index." msgstr "Devuelve la transmisión en el índice especificado." msgid "" "Returns the probability weight associated with the stream at the given index." msgstr "" "Devuelve el peso de probabilidad asociado con la transmisión en el índice " "dado." msgid "Move a stream from one index to another." msgstr "Mueve una transmisión de un índice a otro." msgid "Remove the stream at the specified index." msgstr "Elimina la transmisión en el índice especificado." msgid "Set the AudioStream at the specified index." msgstr "Establece el AudioStream en el índice especificado." msgid "" "Set the probability weight of the stream at the specified index. The higher " "this value, the more likely that the randomizer will choose this stream " "during random playback modes." msgstr "" "Establece el peso de probabilidad de la transmisión en el índice " "especificado. Cuanto mayor sea este valor, más probable será que el generador " "aleatorio elija esta transmisión durante los modos de reproducción aleatoria." msgid "" "Controls how this AudioStreamRandomizer picks which AudioStream to play next." msgstr "" "Controla cómo este AudioStreamRandomizer elige qué AudioStream reproducir a " "continuación." msgid "" "The largest possible frequency multiplier of the random pitch variation. " "Pitch will be randomly chosen within a range of [code skip-lint]1.0 / " "random_pitch[/code] and [code skip-lint]random_pitch[/code]. A value of " "[code]1.0[/code] means no variation. A value of [code]2.0[/code] means pitch " "will be randomized between double and half.\n" "[b]Note:[/b] Setting this property also sets [member random_pitch_semitones]." msgstr "" "El mayor multiplicador de frecuencia posible de la variación de tono " "aleatoria. El tono se elegirá aleatoriamente dentro de un rango de [code skip-" "lint]1.0 / random_pitch[/code] y [code skip-lint]random_pitch[/code]. Un " "valor de [code]1.0[/code] significa que no hay variación. Un valor de " "[code]2.0[/code] significa que el tono se aleatorizará entre el doble y la " "mitad.\n" "[b]Nota:[/b] Establecer esta propiedad también establece [member " "random_pitch_semitones]." msgid "" "The largest possible distance, in semitones, of the random pitch variation. A " "value of [code]0.0[/code] means no variation.\n" "[b]Note:[/b] Setting this property also sets [member random_pitch]." msgstr "" "La mayor distancia posible, en semitonos, de la variación de tono aleatoria. " "Un valor de [code]0.0[/code] significa que no hay variación.\n" "[b]Nota:[/b] Establecer esta propiedad también establece [member " "random_pitch]." msgid "" "The intensity of random volume variation. Volume will be increased or " "decreased by a random value up to [code skip-lint]random_volume_offset_db[/" "code]. A value of [code]0.0[/code] means no variation. A value of [code]3.0[/" "code] means volume will be randomized between [code]-3.0 dB[/code] and [code]" "+3.0 dB[/code]." msgstr "" "La intensidad de la variación de volumen aleatoria. El volumen se aumentará o " "disminuirá en un valor aleatorio hasta [code skip-" "lint]random_volume_offset_db[/code]. Un valor de [code]0.0[/code] significa " "que no hay variación. Un valor de [code]3.0[/code] significa que el volumen " "se aleatorizará entre [code]-3.0 dB[/code] y [code]+3.0 dB[/code]." msgid "" "Pick a stream at random according to the probability weights chosen for each " "stream. If only 1 sound is present in the pool, the same sound will always " "play." msgstr "" "Selecciona un flujo al azar según los pesos de probabilidad asignados a cada " "flujo. Si solo hay 1 sonido en la colección, siempre se reproducirá ese mismo " "sonido." msgid "" "Play streams in the order they appear in the stream pool. If only 1 sound is " "present in the pool, the same sound will always play." msgstr "" "Reproduce los flujos en el orden en que aparecen en la colección. Si solo hay " "1 sonido en la colección, siempre se reproducirá ese mismo sonido." msgid "" "Stream that can be fitted with sub-streams, which will be played in-sync." msgstr "" "Flujo que puede contener sub-flujos, los cuales se reproducirán de manera " "sincronizada." msgid "" "This is a stream that can be fitted with sub-streams, which will be played in-" "sync. The streams begin at exactly the same time when play is pressed, and " "will end when the last of them ends. If one of the sub-streams loops, then " "playback will continue." msgstr "" "Este es un flujo que puede contener sub-flujos, los cuales se reproducirán de " "manera sincronizada. Los flujos comienzan exactamente al mismo tiempo al " "presionar reproducir, y terminarán cuando finalice el último de ellos. Si uno " "de los sub-flujos se repite en bucle, la reproducción continuará." msgid "Get one of the synchronized streams, by index." msgstr "Obtener una de las transmisiones sincronizadas, por índice." msgid "Get the volume of one of the synchronized streams, by index." msgstr "" "Obtener el volumen de una de las transmisiones sincronizadas, por índice." msgid "Stores audio data loaded from WAV files." msgstr "Almacena datos de audio cargados desde archivos WAV." msgid "" "Creates a new [AudioStreamWAV] instance from the given buffer. The buffer " "must contain WAV data.\n" "The keys and values of [param options] match the properties of " "[ResourceImporterWAV]. The usage of [param options] is identical to [method " "AudioStreamWAV.load_from_file]." msgstr "" "Crea una nueva instancia de [AudioStreamWAV] a partir del buffer " "proporcionado. El buffer debe contener datos WAV.\n" "Las claves y valores de [param options] coinciden con las propiedades de " "[ResourceImporterWAV]. El uso de [param options] es idéntico al de [method " "AudioStreamWAV.load_from_file]." msgid "" "Creates a new [AudioStreamWAV] instance from the given file path. The file " "must be in WAV format.\n" "The keys and values of [param options] match the properties of " "[ResourceImporterWAV].\n" "[b]Example:[/b] Load the first file dropped as a WAV and play it:\n" "[codeblock]\n" "@onready var audio_player = $AudioStreamPlayer\n" "\n" "func _ready():\n" "\tget_window().files_dropped.connect(_on_files_dropped)\n" "\n" "func _on_files_dropped(files):\n" "\tif files[0].get_extension() == \"wav\":\n" "\t\taudio_player.stream = AudioStreamWAV.load_from_file(files[0], {\n" "\t\t\t\t\"force/max_rate\": true,\n" "\t\t\t\t\"force/max_rate_hz\": 11025\n" "\t\t\t})\n" "\t\taudio_player.play()\n" "[/codeblock]" msgstr "" "Crea una nueva instancia de [AudioStreamWAV] a partir de la ruta de archivo " "proporcionada. El archivo debe estar en formato WAV.\n" "Las claves y valores de [param options] coinciden con las propiedades de " "[ResourceImporterWAV].\n" "[b]Ejemplo:[/b] Carga el primer archivo arrastrado como WAV y reprodúcelo:\n" "[codeblock]\n" "@onready var audio_player = $AudioStreamPlayer\n" "\n" "func _ready():\n" "\tget_window().files_dropped.connect(_on_files_dropped)\n" "\n" "func _on_files_dropped(files):\n" "\tif files[0].get_extension() == \"wav\":\n" "\t\taudio_player.stream = AudioStreamWAV.load_from_file(files[0], {\n" "\t\t\t\t\"force/max_rate\": true,\n" "\t\t\t\t\"force/max_rate_hz\": 11025\n" "\t\t\t})\n" "\t\taudio_player.play()\n" "[/codeblock]" msgid "" "Saves the AudioStreamWAV as a WAV file to [param path]. Samples with IMA " "ADPCM or Quite OK Audio formats can't be saved.\n" "[b]Note:[/b] A [code].wav[/code] extension is automatically appended to " "[param path] if it is missing." msgstr "" "Guarda el AudioStreamWAV como un archivo WAV en [param path]. Las muestras " "con formatos IMA ADPCM o Quite OK Audio no se pueden guardar.\n" "[b]Nota:[/b] Se añade automáticamente una extensión [code].wav[/code] a " "[param path] si falta." msgid "" "Contains the audio data in bytes.\n" "[b]Note:[/b] If [member format] is set to [constant FORMAT_8_BITS], this " "property expects signed 8-bit PCM data. To convert from unsigned 8-bit PCM, " "subtract 128 from each byte.\n" "[b]Note:[/b] If [member format] is set to [constant FORMAT_QOA], this " "property expects data from a full QOA file." msgstr "" "Contiene los datos de audio en bytes.\n" "[b]Nota:[/b] Si [member format] está configurado en [constant FORMAT_8_BITS], " "esta propiedad espera datos PCM de 8 bits con signo. Para convertir desde PCM " "de 8 bits sin signo, resta 128 a cada byte.\n" "[b]Nota:[/b] Si [member format] está configurado en [constant FORMAT_QOA], " "esta propiedad espera datos de un archivo QOA completo." msgid "Audio format." msgstr "Formato de audio." msgid "" "The loop start point (in number of samples, relative to the beginning of the " "stream)." msgstr "" "El punto de inicio del bucle (en número de muestras, relativo al inicio de la " "secuencia)." msgid "" "The loop end point (in number of samples, relative to the beginning of the " "stream)." msgstr "" "El punto de fin del bucle (en número de muestras, relativo al inicio de la " "secuencia)." msgid "The loop mode." msgstr "El modo de repetición." msgid "" "The sample rate for mixing this audio. Higher values require more storage " "space, but result in better quality.\n" "In games, common sample rates in use are [code]11025[/code], [code]16000[/" "code], [code]22050[/code], [code]32000[/code], [code]44100[/code], and " "[code]48000[/code].\n" "According to the [url=https://en.wikipedia.org/wiki/" "Nyquist%E2%80%93Shannon_sampling_theorem]Nyquist-Shannon sampling theorem[/" "url], there is no quality difference to human hearing when going past 40,000 " "Hz (since most humans can only hear up to ~20,000 Hz, often less). If you are " "using lower-pitched sounds such as voices, lower sample rates such as " "[code]32000[/code] or [code]22050[/code] may be usable with no loss in " "quality." msgstr "" "La frecuencia de muestreo para mezclar este audio. Valores más altos " "requieren más espacio de almacenamiento, pero ofrecen mejor calidad.\n" "En juegos, las frecuencias de muestreo comunes son [code]11025[/code], " "[code]16000[/code], [code]22050[/code], [code]32000[/code], [code]44100[/" "code] y [code]48000[/code].\n" "Según el [url=https://en.wikipedia.org/wiki/" "Nyquist%E2%80%93Shannon_sampling_theorem]teorema de muestreo de Nyquist-" "Shannon[/url], no hay diferencia de calidad perceptible para el oído humano " "al superar los 40,000 Hz (ya que la mayoría de los humanos solo pueden oír " "hasta ~20,000 Hz, a menudo menos). Si estás usando sonidos de tono más bajo, " "como voces, frecuencias de muestreo más bajas como [code]32000[/code] o " "[code]22050[/code] pueden ser utilizables sin pérdida de calidad." msgid "If [code]true[/code], audio is stereo." msgstr "Si es [code]true[/code], el audio es estéreo." msgid "" "Contains user-defined tags if found in the WAV data.\n" "Commonly used tags include [code]title[/code], [code]artist[/code], " "[code]album[/code], [code]tracknumber[/code], and [code]date[/code] " "([code]date[/code] does not have a standard date format).\n" "[b]Note:[/b] No tag is [i]guaranteed[/i] to be present in every file, so make " "sure to account for the keys not always existing.\n" "[b]Note:[/b] Only WAV files using a [code]LIST[/code] chunk with an " "identifier of [code]INFO[/code] to encode the tags are currently supported." msgstr "" "Contiene las etiquetas definidas por el usuario si se encuentran en los datos " "WAV.\n" "Las etiquetas más comunes incluyen [code]title[/code], [code]artist[/code], " "[code]album[/code], [code]tracknumber[/code] y [code]date[/code] ([code]date[/" "code] no tiene un formato de fecha estándar).\n" "[b]Nota:[/b] Ninguna etiqueta está [i]garantizada[/i] en todos los archivos, " "por lo que se debe tener en cuenta que las claves pueden no existir siempre.\n" "[b]Nota:[/b] Actualmente, solo se admiten archivos WAV que utilicen un chunk " "[code]LIST[/code] con un identificador [code]INFO[/code] para codificar las " "etiquetas." msgid "" "Audio is lossily compressed as [url=https://qoaformat.org/]Quite OK Audio[/" "url]." msgstr "" "El audio está comprimido con pérdida usando [url=https://qoaformat.org/]Quite " "OK Audio[/url]." msgid "Audio does not loop." msgstr "El audio no se reproduce en bucle." msgid "" "Audio loops the data between [member loop_begin] and [member loop_end], " "playing forward only." msgstr "" "El audio hace un bucle con los datos entre [member loop_begin] y [member " "loop_end], reproduciéndose sólo hacia adelante." msgid "" "Audio loops the data between [member loop_begin] and [member loop_end], " "playing back and forth." msgstr "" "El audio hace un bucle con los datos entre [member loop_begin] y [member " "loop_end], reproduciéndose hacia adelante y hacia atrás." msgid "" "Audio loops the data between [member loop_begin] and [member loop_end], " "playing backward only." msgstr "" "El audio hace un bucle con los datos entre [member loop_begin] y [member " "loop_end], reproduciéndose sólo hacia atrás." msgid "Awaits a specified signal." msgstr "Espera una señal específica." msgid "" "A node that copies a region of the screen to a buffer for access in shader " "code." msgstr "" "Un nodo que copia una región de la pantalla a un búfer para acceder a ella " "desde código de shader." msgid "" "Node for back-buffering the currently-displayed screen. The region defined in " "the [BackBufferCopy] node is buffered with the content of the screen it " "covers, or the entire screen according to the [member copy_mode]. It can be " "accessed in shader scripts using the screen texture (i.e. a uniform sampler " "with [code]hint_screen_texture[/code]).\n" "[b]Note:[/b] Since this node inherits from [Node2D] (and not [Control]), " "anchors and margins won't apply to child [Control]-derived nodes. This can be " "problematic when resizing the window. To avoid this, add [Control]-derived " "nodes as [i]siblings[/i] to the [BackBufferCopy] node instead of adding them " "as children." msgstr "" "Nodo para realizar un \"back-buffering\" de la pantalla que se muestra " "actualmente. La región definida en el nodo [BackBufferCopy] se almacena en un " "búfer con el contenido de la zona de la pantalla que cubre, o de toda la " "pantalla según el [member copy_mode]. Se puede acceder a este contenido en " "scripts de sombreado (shaders) utilizando la textura de pantalla (es decir, " "un uniform sampler con [code]hint_screen_texture[/code]).\n" "[b]Nota:[/b] Dado que este nodo hereda de [Node2D] (y no de [Control]), las " "anclas (anchors) y márgenes no se aplicarán a los nodos hijos derivados de " "[Control]. Esto puede ser problemático al cambiar el tamaño de la ventana. " "Para evitarlo, añade los nodos derivados de [Control] como [i]hermanos[/i] " "del nodo [BackBufferCopy] en lugar de añadirlos como hijos." msgid "Screen-reading shaders" msgstr "Shaders de lectura de pantalla" msgid "Buffer mode." msgstr "Modo de búfer." msgid "[BackBufferCopy] buffers a rectangular region." msgstr "[BackBufferCopy] almacena una región rectangular." msgid "[BackBufferCopy] buffers the entire screen." msgstr "[BackBufferCopy] almacena toda la pantalla." msgid "Abstract base class for GUI buttons." msgstr "Clase base abstracta para botones GUI." msgid "" "[BaseButton] is an abstract base class for GUI buttons. It doesn't display " "anything by itself." msgstr "" "[BaseButton] es una clase base abstracta para botones de interfaz gráfica. No " "muestra nada por sí sola." msgid "" "Called when the button is pressed. If you need to know the button's pressed " "state (and [member toggle_mode] is active), use [method _toggled] instead." msgstr "" "Se llama cuando se presiona el botón. Si necesitas saber el estado de " "pulsación del botón (y [member toggle_mode] está activo), utiliza en su lugar " "el [method _toggled]." msgid "" "Called when the button is toggled (only if [member toggle_mode] is active)." msgstr "" "Se llama cuando se cambia el estado del botón(Activado/Desactivado) (sólo si " "[member toggle_mode] está activo)." msgid "" "Returns the visual state used to draw the button. This is useful mainly when " "implementing your own draw code by either overriding _draw() or connecting to " "\"draw\" signal. The visual state of the button is defined by the [enum " "DrawMode] enum." msgstr "" "Devuelve el estado visual utilizado para dibujar el botón. Esto es útil " "principalmente cuando implementas tu propio código de dibujo, ya sea anulando " "_draw() o conectando la señal de \"dibujo\". El estado visual del botón está " "definido por el enum [enum DrawMode]." msgid "" "Returns [code]true[/code] if the mouse has entered the button and has not " "left it yet." msgstr "" "Devuelve [code]true[/code] si el ratón ha entrado en el botón y no lo ha " "dejado todavía." msgid "" "Changes the [member button_pressed] state of the button, without emitting " "[signal toggled]. Use when you just want to change the state of the button " "without sending the pressed event (e.g. when initializing scene). Only works " "if [member toggle_mode] is [code]true[/code].\n" "[b]Note:[/b] This method doesn't unpress other buttons in [member " "button_group]." msgstr "" "Cambia el estado de [member button_pressed] del botón, sin emitir [signal " "toggled]. Úsalo cuando solo quieras cambiar el estado del botón sin enviar el " "evento de pulsado (por ejemplo, al inicializar la escena). Solo funciona si " "[member toggle_mode] está en [code]true[/code].\n" "[b]Nota:[/b] Este método no desactiva otros botones en [member button_group]." msgid "Determines when the button is considered clicked." msgstr "Determina cuándo se considera que se hizo clic en el botón." msgid "" "The [ButtonGroup] associated with the button. Not to be confused with node " "groups.\n" "[b]Note:[/b] The button will be configured as a radio button if a " "[ButtonGroup] is assigned to it." msgstr "" "El [ButtonGroup] asociado con el botón. No confundir con grupos de nodos.\n" "[b]Nota:[/b] El botón se configurará como un botón de opción si se le asigna " "un [ButtonGroup]." msgid "" "Binary mask to choose which mouse buttons this button will respond to.\n" "To allow both left-click and right-click, use [code]MOUSE_BUTTON_MASK_LEFT | " "MOUSE_BUTTON_MASK_RIGHT[/code]." msgstr "" "Máscara binaria para elegir a qué botones del ratón responderá este botón.\n" "Para permitir clics izquierdo y derecho, utiliza [code]MOUSE_BUTTON_MASK_LEFT " "| MOUSE_BUTTON_MASK_RIGHT[/code]." msgid "" "If [code]true[/code], the button's state is pressed. Means the button is " "pressed down or toggled (if [member toggle_mode] is active). Only works if " "[member toggle_mode] is [code]true[/code].\n" "[b]Note:[/b] Changing the value of [member button_pressed] will result in " "[signal toggled] to be emitted. If you want to change the pressed state " "without emitting that signal, use [method set_pressed_no_signal]." msgstr "" "Si es [code]true[/code], el estado del botón es presionado. Significa que el " "botón está hundido o activado (si [member toggle_mode] está activo). Solo " "funciona si [member toggle_mode] es [code]true[/code].\n" "[b]Nota:[/b] Cambiar el valor de [member button_pressed] resultará en la " "emisión de la señal [signal toggled]. Si deseas cambiar el estado de presión " "sin emitir esa señal, utiliza [method set_pressed_no_signal]." msgid "" "If [code]true[/code], the button is in disabled state and can't be clicked or " "toggled.\n" "[b]Note:[/b] If the button is disabled while held down, [signal button_up] " "will be emitted." msgstr "" "Si es [code]true[/code], el botón está en estado deshabilitado y no se puede " "hacer clic ni alternar.\n" "[b]Nota:[/b] Si el botón se deshabilita mientras se mantiene presionado, se " "emitirá [signal button_up]." msgid "" "If [code]true[/code], the button stays pressed when moving the cursor outside " "the button while pressing it.\n" "[b]Note:[/b] This property only affects the button's visual appearance. " "Signals will be emitted at the same moment regardless of this property's " "value." msgstr "" "Si es [code]true[/code], el botón permanecee pulsado cuando el cursor se " "mueve fuera mientras se presiona.\n" "[b]Nota:[/b] Esta propiedad solo afecta la apariencia visual del botón. Se " "emitirán señales en el mismo momento sin tener en cuenta el valor de esta " "propiedad." msgid "[Shortcut] associated to the button." msgstr "[Shortcut] asociado al botón." msgid "" "If [code]true[/code], the button will highlight for a short amount of time " "when its shortcut is activated. If [code]false[/code] and [member " "toggle_mode] is [code]false[/code], the shortcut will activate without any " "visual feedback." msgstr "" "Si es [code]true[/code], el botón se resaltará durante un breve periodo de " "tiempo cuando se active su atajo. Si es [code]false[/code] y [member " "toggle_mode] es [code]false[/code], el atajo se activará sin ningún tipo de " "respuesta visual." msgid "" "If [code]true[/code], the button is in toggle mode. Makes the button flip " "state between pressed and unpressed each time its area is clicked." msgstr "" "Si es [code]true[/code], el botón está en modo de conmutación. Hace que el " "botón cambie de estado entre presionado y no presionado cada vez que se hace " "clic en su área." msgid "Emitted when the button starts being held down." msgstr "Emitida cuando el botón comienza a ser presionado." msgid "Emitted when the button stops being held down." msgstr "Emitida cuando el botón deja de ser presionado." msgid "" "Emitted when the button is toggled or pressed. This is on [signal " "button_down] if [member action_mode] is [constant ACTION_MODE_BUTTON_PRESS] " "and on [signal button_up] otherwise.\n" "If you need to know the button's pressed state (and [member toggle_mode] is " "active), use [signal toggled] instead." msgstr "" "Emitida cuando el botón se conmuta o se presiona. Esto está en [signal " "button_down] si el [member action_mode] es [constant " "ACTION_MODE_BUTTON_PRESS] y en [signal button_up] en caso contrario.\n" "Si necesitas saber el estado de pulsación del botón (y [member toggle_mode] " "está activo), utiliza [signal toggled] en su lugar." msgid "" "Emitted when the button was just toggled between pressed and normal states " "(only if [member toggle_mode] is active). The new state is contained in the " "[param toggled_on] argument." msgstr "" "Se emite cuando el botón acaba de conmutar entre los estados presionado y " "normal (solo si [member toggle_mode] está activo). El nuevo estado se incluye " "en el argumento [param toggled_on]." msgid "" "The normal state (i.e. not pressed, not hovered, not toggled and enabled) of " "buttons." msgstr "" "El estado normal (es decir, no presionado, no encima del botón, no activado y " "activado) de los botones." msgid "The state of buttons are pressed." msgstr "El estado de los botones se presiona." msgid "The state of buttons are hovered." msgstr "El estado de los botones que tienen el cursor encima." msgid "The state of buttons are disabled." msgstr "El estado de los botones está desactivado." msgid "The state of buttons are both hovered and pressed." msgstr "El estado de los botones cuyo cursor esta encima y se presiona." msgid "Require just a press to consider the button clicked." msgstr "Requiere sólo una pulsación para considerar el botón pulsado." msgid "" "Require a press and a subsequent release before considering the button " "clicked." msgstr "" "Requiere de una pulsación y una posterior liberación antes de considerar el " "botón pulsado." msgid "Abstract base class for defining the 3D rendering properties of meshes." msgstr "" "Clase base abstracta para definir las propiedades de renderizado 3D de mallas." msgid "Standard Material 3D and ORM Material 3D" msgstr "Material 3D estándar y Material 3D ORM" msgid "Sets the texture for the slot specified by [param param]." msgstr "Establece la textura para la ranura especificada por [param param]." msgid "" "The material's base color.\n" "[b]Note:[/b] If [member detail_enabled] is [code]true[/code] and a [member " "detail_albedo] texture is specified, [member albedo_color] will [i]not[/i] " "modulate the detail texture. This can be used to color partial areas of a " "material by not specifying an albedo texture and using a transparent [member " "detail_albedo] texture instead." msgstr "" "Color base del material.\n" "[b]Nota:[/b] Si [member detail_enabled] es [code]true[/code] y se especifica " "una textura [member detail_albedo], [member albedo_color] [i]no[/i] modulará " "la textura de detalle. Esto se puede usar para colorear áreas parciales de un " "material sin especificar una textura de albedo y usando una textura [member " "detail_albedo] transparente." msgid "" "Texture to multiply by [member albedo_color]. Used for basic texturing of " "objects.\n" "If the texture appears unexpectedly too dark or too bright, check [member " "albedo_texture_force_srgb]." msgstr "" "Textura para multiplicar por [member albedo_color]. Se utiliza para la " "texturización básica de objetos.\n" "Si la textura aparece inesperadamente demasiado oscura o demasiado brillante, " "verifica [member albedo_texture_force_srgb]." msgid "" "If [code]true[/code], forces a conversion of the [member albedo_texture] from " "nonlinear sRGB encoding to linear encoding. See also [member " "vertex_color_is_srgb].\n" "This should only be enabled when needed (typically when using a " "[ViewportTexture] as [member albedo_texture]). If [member " "albedo_texture_force_srgb] is [code]true[/code] when it shouldn't be, the " "texture will appear to be too dark. If [member albedo_texture_force_srgb] is " "[code]false[/code] when it shouldn't be, the texture will appear to be too " "bright." msgstr "" "Si es [code]true[/code], fuerza una conversión de [member albedo_texture] de " "codificación sRGB no lineal a codificación lineal. Véase también [member " "vertex_color_is_srgb].\n" "Esto solo debe activarse cuando sea necesario (normalmente al usar un " "[ViewportTexture] como [member albedo_texture]). Si [member " "albedo_texture_force_srgb] es [code]true[/code] cuando no debería serlo, la " "textura se verá demasiado oscura. Si [member albedo_texture_force_srgb] es " "[code]false[/code] cuando no debería serlo, la textura se verá demasiado " "brillante." msgid "" "Enables multichannel signed distance field rendering shader. Use [member " "msdf_pixel_range] and [member msdf_outline_size] to configure MSDF parameters." msgstr "" "Activa el shader de renderizado de campos de distancia con signo multicanal " "(MSDF). Utiliza [member msdf_pixel_range] y [member msdf_outline_size] para " "configurar los parámetros de MSDF." msgid "The type of alpha antialiasing to apply." msgstr "El tipo de antialiasing alfa que se aplicará." msgid "" "Threshold at which the alpha scissor will discard values. Higher values will " "result in more pixels being discarded. If the material becomes too opaque at " "a distance, try increasing [member alpha_scissor_threshold]. If the material " "disappears at a distance, try decreasing [member alpha_scissor_threshold]." msgstr "" "Umbral en el cual el alpha scissor descartará valores. Valores más altos " "resultarán en que se descarten más píxeles. Si el material se vuelve " "demasiado opaco a la distancia, intenta aumentar [member " "alpha_scissor_threshold]. Si el material desaparece a la distancia, intenta " "disminuir [member alpha_scissor_threshold]." msgid "" "The strength of the anisotropy effect. This is multiplied by [member " "anisotropy_flowmap]'s alpha channel if a texture is defined there and the " "texture contains an alpha channel." msgstr "" "La fuerza del efecto de anisotropía. Esto se multiplica por el canal alfa de " "[member anisotropy_flowmap] si se define una textura allí y la textura " "contiene un canal alfa." msgid "" "If [code]true[/code], anisotropy is enabled. Anisotropy changes the shape of " "the specular blob and aligns it to tangent space. This is useful for brushed " "aluminum and hair reflections.\n" "[b]Note:[/b] Mesh tangents are needed for anisotropy to work. If the mesh " "does not contain tangents, the anisotropy effect will appear broken.\n" "[b]Note:[/b] Material anisotropy should not to be confused with anisotropic " "texture filtering, which can be enabled by setting [member texture_filter] to " "[constant TEXTURE_FILTER_LINEAR_WITH_MIPMAPS_ANISOTROPIC]." msgstr "" "Si es [code]true[/code], la anisotropía está activada. La anisotropía cambia " "la forma del brillo especular y lo alinea con el espacio tangente. Esto es " "útil para reflejos en aluminio cepillado y cabello.\n" "[b]Nota:[/b] Se necesitan tangentes en la malla para que la anisotropía " "funcione. Si la malla no contiene tangentes, el efecto de anisotropía se verá " "incorrecto.\n" "[b]Nota:[/b] La anisotropía del material no debe confundirse con el filtrado " "anisotrópico de texturas, que puede activarse estableciendo [member " "texture_filter] en [constant TEXTURE_FILTER_LINEAR_WITH_MIPMAPS_ANISOTROPIC]." msgid "" "Texture that offsets the tangent map for anisotropy calculations and " "optionally controls the anisotropy effect (if an alpha channel is present). " "The flowmap texture is expected to be a derivative map, with the red channel " "representing distortion on the X axis and green channel representing " "distortion on the Y axis. Values below 0.5 will result in negative " "distortion, whereas values above 0.5 will result in positive distortion.\n" "If present, the texture's alpha channel will be used to multiply the strength " "of the [member anisotropy] effect. Fully opaque pixels will keep the " "anisotropy effect's original strength while fully transparent pixels will " "disable the anisotropy effect entirely. The flowmap texture's blue channel is " "ignored." msgstr "" "Textura que desplaza el mapa de tangentes para los cálculos de anisotropía y, " "opcionalmente, controla el efecto de anisotropía (si hay un canal alfa " "presente). Se espera que la textura del flowmap sea un mapa de derivadas, " "donde el canal rojo representa la distorsión en el eje X y el canal verde " "representa la distorsión en el eje Y. Los valores por debajo de 0.5 darán " "como resultado una distorsión negativa, mientras que los valores por encima " "de 0.5 darán como resultado una distorsión positiva.\n" "Si está presente, el canal alfa de la textura se utilizará para multiplicar " "la fuerza del efecto de [member anisotropy]. Los píxeles totalmente opacos " "mantendrán la fuerza original del efecto de anisotropía, mientras que los " "píxeles totalmente transparentes desactivarán el efecto por completo. El " "canal azul de la textura del flowmap se ignora." msgid "" "If [code]true[/code], ambient occlusion is enabled. Ambient occlusion darkens " "areas based on the [member ao_texture]." msgstr "" "Si es [code]true[/code], se activa la oclusión ambiental. La oclusión " "ambiental oscurece las áreas basadas en el [member ao_texture]." msgid "" "Amount that ambient occlusion affects lighting from lights. If [code]0[/" "code], ambient occlusion only affects ambient light. If [code]1[/code], " "ambient occlusion affects lights just as much as it affects ambient light. " "This can be used to impact the strength of the ambient occlusion effect, but " "typically looks unrealistic." msgstr "" "La cantidad que la oclusión ambiental afecta a la iluminación de las luces. " "Si [code]0[/code], la oclusión ambiental sólo afecta a la luz ambiental. Si " "[code]1[/code], la oclusión ambiental afecta a las luces tanto como a la luz " "ambiental. Esto puede utilizarse para influir en la intensidad del efecto de " "la oclusión ambiental, pero normalmente tiene un aspecto poco realista." msgid "" "If [code]true[/code], use [code]UV2[/code] coordinates to look up from the " "[member ao_texture]." msgstr "" "Si es [code]true[/code], usa las coordenadas [code]UV2[/code] para mirar " "hacia arriba desde el [member ao_texture]." msgid "" "Texture that defines the amount of ambient occlusion for a given point on the " "object." msgstr "" "Textura que define la cantidad de oclusión ambiental para un punto " "determinado del objeto." msgid "" "Specifies the channel of the [member ao_texture] in which the ambient " "occlusion information is stored. This is useful when you store the " "information for multiple effects in a single texture. For example if you " "stored metallic in the red channel, roughness in the blue, and ambient " "occlusion in the green you could reduce the number of textures you use." msgstr "" "Especifica el canal del [member ao_texture] en el que se almacena la " "información de oclusión ambiental. Esto es útil cuando se almacena la " "información de múltiples efectos en una sola textura. Por ejemplo, si " "almacena metálico en el canal rojo, rugosidad en el azul y oclusión ambiental " "en el verde podría reducir el número de texturas que utiliza." msgid "" "Texture that specifies the average direction of incoming ambient light at a " "given pixel. The [member bent_normal_texture] only uses the red and green " "channels; the blue and alpha channels are ignored. The normal read from " "[member bent_normal_texture] is oriented around the surface normal provided " "by the [Mesh].\n" "[b]Note:[/b] A bent normal map is different from a regular normal map. When " "baking a bent normal map make sure to use [b]a cosine distribution[/b] for " "the bent normal map to work correctly.\n" "[b]Note:[/b] The mesh must have both normals and tangents defined in its " "vertex data. Otherwise, the shading produced by the bent normal map will not " "look correct. If creating geometry with [SurfaceTool], you can use [method " "SurfaceTool.generate_normals] and [method SurfaceTool.generate_tangents] to " "automatically generate normals and tangents respectively.\n" "[b]Note:[/b] Godot expects the bent normal map to use X+, Y+, and Z+ " "coordinates. See [url=http://wiki.polycount.com/wiki/" "Normal_Map_Technical_Details#Common_Swizzle_Coordinates]this page[/url] for a " "comparison of normal map coordinates expected by popular engines." msgstr "" "Textura que especifica la dirección promedio de la luz ambiental entrante en " "un píxel dado. La [member bent_normal_texture] solo usa los canales rojo y " "verde; los canales azul y alfa se ignoran. La normal leída desde [member " "bent_normal_texture] se orienta alrededor de la normal de superficie " "proporcionada por el [Mesh].\n" "[b]Nota:[/b] Un mapa de normales dobladas (bent normal map) es diferente de " "un mapa de normales regular. Al hornear un mapa de normales dobladas, " "asegúrate de usar [b]una distribución cosenoidal[/b] para que funcione " "correctamente.\n" "[b]Nota:[/b] La malla debe tener tanto normales como tangentes definidas en " "sus datos de vértice. De lo contrario, el sombreado producido por el mapa de " "normales dobladas no se verá correcto. Si estás creando geometría con " "[SurfaceTool], puedes usar [method SurfaceTool.generate_normals] y [method " "SurfaceTool.generate_tangents] para generar automáticamente las normales y " "las tangentes respectivamente.\n" "[b]Nota:[/b] Godot espera que el mapa de normales dobladas use las " "coordenadas X+, Y+ y Z+. Véase [url=http://wiki.polycount.com/wiki/" "Normal_Map_Technical_Details#Common_Swizzle_Coordinates]esta página[/url] " "para una comparación de las coordenadas de mapas de normales esperadas por " "motores populares." msgid "" "Controls how the object faces the camera.\n" "[b]Note:[/b] Billboard mode is not suitable for VR because the left-right " "vector of the camera is not horizontal when the screen is attached to your " "head instead of on the table. See [url=https://github.com/godotengine/godot/" "issues/41567]GitHub issue #41567[/url] for details." msgstr "" "Controla cómo el objeto se orienta hacia la cámara.\n" "[b]Nota:[/b] El modo Billboard no es adecuado para VR porque el vector " "izquierda-derecha de la cámara no es horizontal cuando la pantalla está " "sujeta a tu cabeza en lugar de estar sobre la mesa. Véase el [url=https://" "github.com/godotengine/godot/issues/41567]problema de GitHub #41567[/url] " "para más detalles." msgid "" "Sets the strength of the clearcoat effect. Setting to [code]0[/code] looks " "the same as disabling the clearcoat effect." msgstr "" "Establece la fuerza del efecto del barniz. Ajustar a [code]0[/code] se ve " "igual que desactivar el efecto de barniz." msgid "" "If [code]true[/code], clearcoat rendering is enabled. Adds a secondary " "transparent pass to the lighting calculation resulting in an added specular " "blob. This makes materials appear as if they have a clear layer on them that " "can be either glossy or rough.\n" "[b]Note:[/b] Clearcoat rendering is not visible if the material's [member " "shading_mode] is [constant SHADING_MODE_UNSHADED]." msgstr "" "Si es [code]true[/code], se habilita el renderizado de capa clara " "(clearcoat). Añade un paso transparente secundario al cálculo de iluminación, " "resultando en un brillo especular adicional. Esto hace que los materiales " "parezcan tener una capa clara encima que puede ser brillante o rugosa.\n" "[b]Nota:[/b] El renderizado de capa clara no es visible si el [member " "shading_mode] del material es [constant SHADING_MODE_UNSHADED]." msgid "" "Texture that defines the strength of the clearcoat effect and the glossiness " "of the clearcoat. Strength is specified in the red channel while glossiness " "is specified in the green channel." msgstr "" "Textura que define la fuerza del efecto del barniz y el brillo del barniz. La " "fuerza se especifica en el canal rojo mientras que el brillo se especifica en " "el canal verde." msgid "" "Determines which side of the triangle to cull depending on whether the " "triangle faces towards or away from the camera." msgstr "" "Determina qué lado del triángulo se descarta (cull) dependiendo de si el " "triángulo está orientado hacia la cámara o en dirección opuesta a ella." msgid "" "Determines when depth rendering takes place. See also [member transparency]." msgstr "" "Determina cuándo el renderizado de profundidad se lleva a cabo. Véase también " "[member transparency]." msgid "May be affected by future rendering pipeline changes." msgstr "Puede verse afectado por cambios futuros en el pipeline de renderizado." msgid "" "Determines which comparison operator is used when testing depth.\n" "[b]Note:[/b] Changing [member depth_test] to a non-default value only has a " "visible effect when used on a transparent material, or a material that has " "[member depth_draw_mode] set to [constant DEPTH_DRAW_DISABLED]." msgstr "" "Determina qué operador de comparación se utiliza al realizar la prueba de " "profundidad (depth test).\n" "[b]Nota:[/b] Cambiar [member depth_test] a un valor que no sea el " "predeterminado solo tiene un efecto visible cuando se usa en un material " "transparente, o en un material que tiene [member depth_draw_mode] establecido " "en [constant DEPTH_DRAW_DISABLED]." msgid "" "Texture that specifies the color of the detail overlay. [member " "detail_albedo]'s alpha channel is used as a mask, even when the material is " "opaque. To use a dedicated texture as a mask, see [member detail_mask].\n" "[b]Note:[/b] [member detail_albedo] is [i]not[/i] modulated by [member " "albedo_color]." msgstr "" "Textura que especifica el color de la superposición de detalle (detail " "overlay). El canal alfa de [member detail_albedo] se utiliza como máscara, " "incluso cuando el material es opaco. Para utilizar una textura dedicada como " "máscara, véase [member detail_mask].\n" "[b]Nota:[/b] [member detail_albedo] [i]no[/i] se ve modulado por [member " "albedo_color]." msgid "" "Specifies how the [member detail_albedo] should blend with the current " "[code]ALBEDO[/code]." msgstr "" "Especifica cómo el [member detail_albedo] debe mezclarse con el [code]ALBEDO[/" "code] actual." msgid "" "Specifies whether to use [code]UV[/code] or [code]UV2[/code] for the detail " "layer." msgstr "" "Especifica si se utiliza [code]UV[/code] o [code]UV2[/code] para la capa de " "detalle." msgid "The algorithm used for diffuse light scattering." msgstr "El algoritmo utilizado para la dispersión de luz difusa." msgid "If [code]true[/code], the object receives no ambient light." msgstr "Si es [code]true[/code], el objeto no recibe luz ambiental." msgid "" "If [code]true[/code], the object will not be affected by fog (neither " "volumetric nor depth fog). This is useful for unshaded or transparent " "materials (e.g. particles), which without this setting will be affected even " "if fully transparent." msgstr "" "Si es [code]true[/code], el objeto no se verá afectado por la niebla (ni por " "la niebla volumétrica ni por la de profundidad). Esto es útil para materiales " "sin sombreado (unshaded) o transparentes (por ejemplo, partículas), que sin " "este ajuste se verían afectados incluso si son totalmente transparentes." msgid "" "If [code]true[/code], the object receives no shadow that would otherwise be " "cast onto it." msgstr "" "Si es [code]true[/code], el objeto no recibe ninguna sombra que de otra " "manera sería arrojada sobre él." msgid "" "If [code]true[/code], disables specular occlusion even if [member " "ProjectSettings.rendering/reflections/specular_occlusion/enabled] is " "[code]false[/code]." msgstr "" "Si es [code]true[/code], desactiva la oclusión especular incluso si [member " "ProjectSettings.rendering/reflections/specular_occlusion/enabled] es " "[code]false[/code]." msgid "" "Distance at which the object appears fully opaque.\n" "[b]Note:[/b] If [member distance_fade_max_distance] is less than [member " "distance_fade_min_distance], the behavior will be reversed. The object will " "start to fade away at [member distance_fade_max_distance] and will fully " "disappear once it reaches [member distance_fade_min_distance]." msgstr "" "Distancia a la cual el objeto aparece completamente opaco.\n" "[b]Nota:[/b] Si [member distance_fade_max_distance] es menor que [member " "distance_fade_min_distance], el comportamiento se invertirá. El objeto " "comenzará a desvanecerse en [member distance_fade_max_distance] y " "desaparecerá por completo una vez que alcance [member " "distance_fade_min_distance]." msgid "" "Distance at which the object starts to become visible. If the object is less " "than this distance away, it will be invisible.\n" "[b]Note:[/b] If [member distance_fade_min_distance] is greater than [member " "distance_fade_max_distance], the behavior will be reversed. The object will " "start to fade away at [member distance_fade_max_distance] and will fully " "disappear once it reaches [member distance_fade_min_distance]." msgstr "" "Distancia a la cual el objeto comienza a hacerse visible. Si el objeto se " "encuentra a una distancia menor a esta, será invisible.\n" "[b]Nota:[/b] Si [member distance_fade_min_distance] es mayor que [member " "distance_fade_max_distance], el comportamiento se invertirá. El objeto " "comenzará a desvanecerse en [member distance_fade_max_distance] y " "desaparecerá por completo una vez que alcance [member " "distance_fade_min_distance]." msgid "" "Specifies which type of fade to use. Can be any of the [enum " "DistanceFadeMode]s." msgstr "" "Especifica el tipo de desvanecimiento a utilizar. Puede ser cualquiera de los " "[enum DistanceFadeMode]s." msgid "The emitted light's color. See [member emission_enabled]." msgstr "El color de la luz emitida. Véase [member emission_enabled]." msgid "Multiplier for emitted light. See [member emission_enabled]." msgstr "El multiplicador de la luz emitida. Véase [member emission_enabled]." msgid "" "Luminance of emitted light, measured in nits (candela per square meter). Only " "available when [member ProjectSettings.rendering/lights_and_shadows/" "use_physical_light_units] is enabled. The default is roughly equivalent to an " "indoor lightbulb." msgstr "" "Luminancia de la luz emitida, medida en nits (candelas por metro cuadrado). " "Solo está disponible cuando [member ProjectSettings.rendering/" "lights_and_shadows/use_physical_light_units] está activado. El valor por " "defecto es aproximadamente equivalente al de una bombilla de luz de " "interiores." msgid "Use [code]UV2[/code] to read from the [member emission_texture]." msgstr "Utiliza [code]UV2[/code] para leer de la [member emission_texture]." msgid "Texture that specifies how much surface emits light at a given point." msgstr "" "Textura que especifica cuánta superficie emite luz en un punto determinado." msgid "" "If [code]true[/code], the object is rendered at the same size regardless of " "distance. The object's size on screen is the same as if the camera was " "[code]1.0[/code] units away from the object's origin, regardless of the " "actual distance from the camera. The [Camera3D]'s field of view (or [member " "Camera3D.size] when in orthogonal/frustum mode) still affects the size the " "object is drawn at." msgstr "" "Si es [code]true[/code], el objeto se renderiza al mismo tamaño " "independientemente de la distancia. El tamaño del objeto en pantalla es el " "mismo que si la cámara estuviera a [code]1.0[/code] unidades de distancia del " "origen del objeto, sin importar la distancia real de la cámara. El campo de " "visión de la [Camera3D] (o el [member Camera3D.size] en modo ortogonal/" "frustum) sigue afectando al tamaño con el que se dibuja el objeto." msgid "" "Overrides the [Camera3D]'s field of view angle (in degrees).\n" "[b]Note:[/b] This behaves as if the field of view is set on a [Camera3D] with " "[member Camera3D.keep_aspect] set to [constant Camera3D.KEEP_HEIGHT]. " "Additionally, it may not look correct on a non-perspective camera where the " "field of view setting is ignored." msgstr "" "Invalida (override) el ángulo del campo de visión de la [Camera3D] (en " "grados).\n" "[b]Nota:[/b] Esto se comporta como si el campo de visión estuviera " "configurado en una [Camera3D] con [member Camera3D.keep_aspect] establecido " "en [constant Camera3D.KEEP_HEIGHT]. Además, es posible que no se vea " "correctamente en una cámara ortográfica donde se ignora el ajuste del campo " "de visión." msgid "" "If [code]true[/code], enables the vertex grow setting. This can be used to " "create mesh-based outlines using a second material pass and its [member " "cull_mode] set to [constant CULL_FRONT]. See also [member grow_amount].\n" "[b]Note:[/b] Vertex growth cannot create new vertices, which means that " "visible gaps may occur in sharp corners. This can be alleviated by designing " "the mesh to use smooth normals exclusively using [url=http://" "wiki.polycount.com/wiki/Face_weighted_normals]face weighted normals[/url] in " "the 3D authoring software. In this case, grow will be able to join every " "outline together, just like in the original mesh." msgstr "" "Si es [code]true[/code], activa el ajuste de crecimiento de vértices. Esto " "puede utilizarse para crear contornos (outlines) basados en la malla usando " "un segundo pase de material con su [member cull_mode] establecido en " "[constant CULL_FRONT]. Véase también [member grow_amount].\n" "[b]Nota:[/b] El crecimiento de vértices no puede crear nuevos vértices, lo " "que significa que pueden aparecer huecos visibles en las esquinas afiladas. " "Esto puede mitigarse diseñando la malla para que utilice exclusivamente " "normales suavizadas mediante [url=http://wiki.polycount.com/wiki/" "Face_weighted_normals]normales ponderadas por cara[/url] en tu software de " "modelado 3D. En ese caso, el crecimiento podrá unir cada contorno, tal como " "en la malla original." msgid "" "Grows object vertices in the direction of their normals. Only effective if " "[member grow] is [code]true[/code]." msgstr "" "Expande los vértices del objeto en la dirección de sus normales. Solo es " "efectivo si [member grow] es [code]true[/code]." msgid "" "If [code]true[/code], uses parallax occlusion mapping to represent depth in " "the material instead of simple offset mapping (see [member " "heightmap_enabled]). This results in a more convincing depth effect, but is " "much more expensive on the GPU. Only enable this on materials where it makes " "a significant visual difference." msgstr "" "Si es [code]true[/code], utiliza mapeo de oclusión por paralaje (parallax " "occlusion mapping) para representar la profundidad en el material en lugar " "del mapeo de desplazamiento simple (ver [member heightmap_enabled]). Esto " "genera un efecto de profundidad mucho más convincente, pero es mucho más " "costoso para la GPU. Activa esta opción solo en materiales donde marque una " "diferencia visual significativa." msgid "" "If [code]true[/code], height mapping is enabled (also called \"parallax " "mapping\" or \"depth mapping\"). See also [member normal_enabled]. Height " "mapping is a demanding feature on the GPU, so it should only be used on " "materials where it makes a significant visual difference.\n" "[b]Note:[/b] Height mapping is not supported if triplanar mapping is used on " "the same material. The value of [member heightmap_enabled] will be ignored if " "[member uv1_triplanar] is enabled." msgstr "" "Si es [code]true[/code], el mapeo de altura está activado (también llamado " "\"parallax mapping\" o \"depth mapping\"). Véase también [member " "normal_enabled]. El mapeo de altura es una característica exigente para la " "GPU, por lo que solo debe usarse en materiales donde marque una diferencia " "visual significativa.\n" "[b]Nota:[/b] El mapeo de altura no es compatible si se utiliza el mapeo " "triplanar en el mismo material. El valor de [member heightmap_enabled] se " "ignorará si [member uv1_triplanar] está activado." msgid "" "If [code]true[/code], flips the mesh's binormal vectors when interpreting the " "height map. If the heightmap effect looks strange when the camera moves (even " "with a reasonable [member heightmap_scale]), try setting this to [code]true[/" "code]." msgstr "" "Si es [code]true[/code], invierte los vectores binormales de la malla al " "interpretar el mapa de altura. Si el efecto del mapa de altura se ve raro " "cuando la cámara se mueve (incluso con una [member heightmap_scale] " "razonable), intenta establecer esto a [code]true[/code]." msgid "" "If [code]true[/code], flips the mesh's tangent vectors when interpreting the " "height map. If the heightmap effect looks strange when the camera moves (even " "with a reasonable [member heightmap_scale]), try setting this to [code]true[/" "code]." msgstr "" "Si es [code]true[/code], invierte los vectores tangentes de la malla al " "interpretar el mapa de altura. Si el efecto del mapa de altura se ve raro " "cuando la cámara se mueve (incluso con una [member heightmap_scale] " "razonable), intenta establecer esto a [code]true[/code]." msgid "" "If [code]true[/code], interprets the height map texture as a depth map, with " "brighter values appearing to be \"lower\" in altitude compared to darker " "values.\n" "This can be enabled for compatibility with some materials authored for Godot " "3.x. This is not necessary if the Invert import option was used to invert the " "depth map in Godot 3.x, in which case [member heightmap_flip_texture] should " "remain [code]false[/code]." msgstr "" "Si es [code]true[/code], interpreta la textura del mapa de altura como un " "mapa de profundidad, donde los valores más brillantes parecen estar \"más " "bajos\" en altitud en comparación con los valores más oscuros.\n" "Esto se puede habilitar para la compatibilidad con algunos materiales creados " "para Godot 3.x. Esto no es necesario si la opción de importación Invertir se " "usó para invertir el mapa de profundidad en Godot 3.x, en cuyo caso [member " "heightmap_flip_texture] debería permanecer en [code]false[/code]." msgid "" "The number of layers to use for parallax occlusion mapping when the camera is " "up close to the material. Higher values result in a more convincing depth " "effect, especially in materials that have steep height changes. Higher values " "have a significant cost on the GPU, so it should only be increased on " "materials where it makes a significant visual difference.\n" "[b]Note:[/b] Only effective if [member heightmap_deep_parallax] is " "[code]true[/code]." msgstr "" "El número de capas que se utilizarán para el mapeo de oclusión de paralaje " "cuando la cámara esté cerca del material. Los valores más altos resultan en " "un efecto de profundidad más convincente, especialmente en los materiales que " "tienen cambios de altura pronunciados. Los valores más altos tienen un coste " "significativo en la GPU, por lo que solo debe aumentarse en los materiales " "donde produce una diferencia visual significativa.\n" "[b]Nota:[/b] Solo es efectivo si [member heightmap_deep_parallax] es " "[code]true[/code]." msgid "" "The number of layers to use for parallax occlusion mapping when the camera is " "far away from the material. Higher values result in a more convincing depth " "effect, especially in materials that have steep height changes. Higher values " "have a significant cost on the GPU, so it should only be increased on " "materials where it makes a significant visual difference.\n" "[b]Note:[/b] Only effective if [member heightmap_deep_parallax] is " "[code]true[/code]." msgstr "" "El número de capas que se utilizarán para el mapeo de oclusión de paralaje " "cuando la cámara esté lejos del material. Los valores más altos resultan en " "un efecto de profundidad más convincente, especialmente en los materiales que " "tienen cambios de altura pronunciados. Los valores más altos tienen un coste " "significativo en la GPU, por lo que solo debe aumentarse en los materiales " "donde produce una diferencia visual significativa.\n" "[b]Nota:[/b] Solo es efectivo si [member heightmap_deep_parallax] es " "[code]true[/code]." msgid "" "The heightmap scale to use for the parallax effect (see [member " "heightmap_enabled]). The default value is tuned so that the highest point " "(value = 255) appears to be 5 cm higher than the lowest point (value = 0). " "Higher values result in a deeper appearance, but may result in artifacts " "appearing when looking at the material from oblique angles, especially when " "the camera moves. Negative values can be used to invert the parallax effect, " "but this is different from inverting the texture using [member " "heightmap_flip_texture] as the material will also appear to be \"closer\" to " "the camera. In most cases, [member heightmap_scale] should be kept to a " "positive value.\n" "[b]Note:[/b] If the height map effect looks strange regardless of this value, " "try adjusting [member heightmap_flip_binormal] and [member " "heightmap_flip_tangent]. See also [member heightmap_texture] for " "recommendations on authoring heightmap textures, as the way the heightmap " "texture is authored affects how [member heightmap_scale] behaves." msgstr "" "La escala del mapa de altura que se utilizará para el efecto de paralaje (ver " "[member heightmap_enabled]). El valor por defecto está ajustado para que el " "punto más alto (valor = 255) parezca estar 5 cm por encima del punto más bajo " "(valor = 0). Valores más altos resultan en una apariencia de mayor " "profundidad, pero pueden aparecer artefactos (distorsiones) al mirar el " "material desde ángulos oblicuos, especialmente cuando la cámara se mueve. Se " "pueden usar valores negativos para invertir el efecto de paralaje, pero esto " "es diferente a invertir la textura con [member heightmap_flip_texture], ya " "que el material también parecerá estar \"más cerca\" de la cámara. En la " "mayoría de los casos, [member heightmap_scale] debe mantenerse en un valor " "positivo.\n" "[b]Nota:[/b] Si el efecto del mapa de altura se ve extraño independientemente " "de este valor, intenta ajustar [member heightmap_flip_binormal] y [member " "heightmap_flip_tangent]. Véase también [member heightmap_texture] para " "obtener recomendaciones sobre la creación de texturas de mapas de altura, ya " "que la forma en que se crea la textura afecta cómo se comporta [member " "heightmap_scale]." msgid "" "The texture to use as a height map. See also [member heightmap_enabled].\n" "For best results, the texture should be normalized (with [member " "heightmap_scale] reduced to compensate). In [url=https://gimp.org]GIMP[/url], " "this can be done using [b]Colors > Auto > Equalize[/b]. If the texture only " "uses a small part of its available range, the parallax effect may look " "strange, especially when the camera moves.\n" "[b]Note:[/b] To reduce memory usage and improve loading times, you may be " "able to use a lower-resolution heightmap texture as most heightmaps are only " "comprised of low-frequency data." msgstr "" "La textura que se utilizará como mapa de altura (height map). Véase también " "[member heightmap_enabled].\n" "Para obtener los mejores resultados, la textura debe estar normalizada " "(reduciendo luego [member heightmap_scale] para compensar). En [url=https://" "gimp.org]GIMP[/url], esto se puede hacer usando [b]Colores > Auto > " "Ecualizar[/b]. Si la textura solo utiliza una pequeña parte de su rango " "disponible, el efecto de paralaje puede verse extraño, especialmente cuando " "la cámara se mueve.\n" "[b]Nota:[/b] Para reducir el uso de memoria y mejorar los tiempos de carga, " "puedes utilizar una textura de mapa de altura de menor resolución, ya que la " "mayoría de los mapas de altura solo contienen datos de baja frecuencia." msgid "" "A high value makes the material appear more like a metal. Non-metals use " "their albedo as the diffuse color and add diffuse to the specular reflection. " "With non-metals, the reflection appears on top of the albedo color. Metals " "use their albedo as a multiplier to the specular reflection and set the " "diffuse color to black resulting in a tinted reflection. Materials work " "better when fully metal or fully non-metal, values between [code]0[/code] and " "[code]1[/code] should only be used for blending between metal and non-metal " "sections. To alter the amount of reflection use [member roughness]." msgstr "" "Un valor alto hace que el material parezca más como un metal. Los no " "metálicos usan su albedo como color difuso y añaden difusión a la reflexión " "especular. Con los no metálicos, la reflexión aparece sobre el color del " "albedo. Los metales usan su albedo como multiplicador de la reflexión " "especular y ponen el color difuso en negro, lo que resulta en una reflexión " "teñida. Los materiales funcionan mejor cuando son totalmente metálicos o " "totalmente no metálicos, los valores entre [code]0[/code] y [code]1[/code] " "sólo deben utilizarse para la mezcla entre secciones metálicas y no " "metálicas. Para alterar la cantidad de reflexión utiliza [member roughness]." msgid "" "Adjusts the strength of specular reflections. Specular reflections are " "composed of scene reflections and the specular lobe which is the bright spot " "that is reflected from light sources. When set to [code]0.0[/code], no " "specular reflections will be visible. This differs from the [constant " "SPECULAR_DISABLED] [enum SpecularMode] as [constant SPECULAR_DISABLED] only " "applies to the specular lobe from the light source.\n" "[b]Note:[/b] Unlike [member metallic], this is not energy-conserving, so it " "should be left at [code]0.5[/code] in most cases. See also [member roughness]." msgstr "" "Ajusta la fuerza de las reflexiones especulares. Las reflexiones especulares " "se componen de las reflexiones de la escena y el lóbulo especular, que es el " "punto brillante que se refleja de las fuentes de luz. Cuando se establece en " "[code]0.0[/code], no habrá reflexiones especulares visibles. Esto difiere del " "[enum SpecularMode] [constant SPECULAR_DISABLED], ya que [constant " "SPECULAR_DISABLED] solo se aplica al lóbulo especular de la fuente de luz.\n" "[b]Nota:[/b] A diferencia de [member metallic], esto no conserva la energía, " "por lo que debería dejarse en [code]0.5[/code] en la mayoría de los casos. " "Consulte también [member roughness]." msgid "" "Texture used to specify metallic for an object. This is multiplied by [member " "metallic]." msgstr "" "Textura utilizada para especificar el metal de un objeto. Se multiplica por " "[member metallic]." msgid "" "Specifies the channel of the [member metallic_texture] in which the metallic " "information is stored. This is useful when you store the information for " "multiple effects in a single texture. For example if you stored metallic in " "the red channel, roughness in the blue, and ambient occlusion in the green " "you could reduce the number of textures you use." msgstr "" "Especifica el canal de la [member metallic_texture] en el que se almacena la " "información metálica. Esto es útil cuando se almacena la información para " "múltiples efectos en una sola textura. Por ejemplo, si almacenas metálicos en " "el canal rojo, rugosidad en el azul y oclusión ambiental en el verde, podrías " "reducir el número de texturas que utilizas." msgid "The width of the shape outline." msgstr "El ancho del contorno de la forma." msgid "" "The width of the range around the shape between the minimum and maximum " "representable signed distance." msgstr "" "El ancho del rango alrededor de la forma entre la distancia con signo (signed " "distance) mínima y máxima representable." msgid "" "If [code]true[/code], depth testing is disabled and the object will be drawn " "in render order." msgstr "" "Si es [code]true[/code], la prueba de profundidad está desactivada y el " "objeto se dibujará en orden de renderizado." msgid "The strength of the normal map's effect." msgstr "La fuerza del efecto del mapa normal." msgid "" "Texture used to specify the normal at a given pixel. The [member " "normal_texture] only uses the red and green channels; the blue and alpha " "channels are ignored. The normal read from [member normal_texture] is " "oriented around the surface normal provided by the [Mesh].\n" "[b]Note:[/b] The mesh must have both normals and tangents defined in its " "vertex data. Otherwise, the normal map won't render correctly and will only " "appear to darken the whole surface. If creating geometry with [SurfaceTool], " "you can use [method SurfaceTool.generate_normals] and [method " "SurfaceTool.generate_tangents] to automatically generate normals and tangents " "respectively.\n" "[b]Note:[/b] Godot expects the normal map to use X+, Y+, and Z+ coordinates. " "See [url=http://wiki.polycount.com/wiki/" "Normal_Map_Technical_Details#Common_Swizzle_Coordinates]this page[/url] for a " "comparison of normal map coordinates expected by popular engines.\n" "[b]Note:[/b] If [member detail_enabled] is [code]true[/code], the [member " "detail_albedo] texture is drawn [i]below[/i] the [member normal_texture]. To " "display a normal map [i]above[/i] the [member detail_albedo] texture, use " "[member detail_normal] instead." msgstr "" "Textura utilizada para especificar la normal en un píxel dado. La [member " "normal_texture] solo usa los canales rojo y verde; los canales azul y alfa se " "ignoran. La normal leída desde [member normal_texture] se orienta alrededor " "de la normal de superficie proporcionada por el [Mesh].\n" "[b]Nota:[/b] La malla debe tener tanto normales como tangentes definidas en " "sus datos de vértice. De lo contrario, el mapa de normales no se renderizará " "correctamente y solo parecerá oscurecer toda la superficie. Si estás creando " "geometría con [SurfaceTool], puedes usar [method " "SurfaceTool.generate_normals] y [method SurfaceTool.generate_tangents] para " "generar automáticamente las normales y las tangentes respectivamente.\n" "[b]Nota:[/b] Godot espera que el mapa de normales use las coordenadas X+, Y+ " "y Z+. Véase [url=http://wiki.polycount.com/wiki/" "Normal_Map_Technical_Details#Common_Swizzle_Coordinates]esta página[/url] " "para una comparación de las coordenadas de mapas de normales esperadas por " "motores populares.\n" "[b]Nota:[/b] Si [member detail_enabled] es [code]true[/code], la textura " "[member detail_albedo] se dibuja [i]debajo[/i] de la [member normal_texture]. " "Para mostrar un mapa de normales [i]encima[/i] de la textura [member " "detail_albedo], usa [member detail_normal] en su lugar." msgid "" "The Occlusion/Roughness/Metallic texture to use. This is a more efficient " "replacement of [member ao_texture], [member roughness_texture] and [member " "metallic_texture] in [ORMMaterial3D]. Ambient occlusion is stored in the red " "channel. Roughness map is stored in the green channel. Metallic map is stored " "in the blue channel. The alpha channel is ignored." msgstr "" "Textura de oclusión/rugosidad/metálica a utilizar. Esta es una sustitución " "más eficiente de [member ao_texture], [member roughness_texture] y [member " "metallic_texture] en [ORMMaterial3D]. La oclusión ambiental se almacena en el " "canal rojo. El mapa de rugosidad se almacena en el canal verde. El mapa " "metálico se almacena en el canal azul. El canal alfa se ignora." msgid "" "The number of vertical frames in the particle sprite sheet. Only enabled when " "using [constant BILLBOARD_PARTICLES]. See [member billboard_mode]." msgstr "" "Número de fotogramas verticales en la hoja de sprites de partículas. Solo se " "habilita al usar [constant BILLBOARD_PARTICLES]. Véase [member " "billboard_mode]." msgid "The point size in pixels. See [member use_point_size]." msgstr "Tamaño en píxeles. Véase [member use_point_size]." msgid "" "Distance over which the fade effect takes place. The larger the distance the " "longer it takes for an object to fade." msgstr "" "Distancia a la que se produce el efecto de desvanecimiento. Cuanto mayor es " "la distancia, más tiempo tarda un objeto en desvanecerse." msgid "" "If [code]true[/code], the proximity fade effect is enabled. The proximity " "fade effect fades out each pixel based on its distance to another object." msgstr "" "Si es [code]true[/code], se activa el efecto de desvanecimiento por " "proximidad. El efecto de desvanecimiento por proximidad se desvanece cada " "píxel basado en su distancia a otro objeto." msgid "" "If [code]true[/code], the refraction effect is enabled. Distorts transparency " "based on light from behind the object.\n" "[b]Note:[/b] Refraction is implemented using the screen texture. Only opaque " "materials will appear in the refraction, since transparent materials do not " "appear in the screen texture." msgstr "" "Si es [code]true[/code], el efecto de refracción se habilita. Distorsiona la " "transparencia basado en la luz desde de detrás del objeto.\n" "[b]Nota:[/b] La refracción se implementa usando la textura de pantalla. Solo " "materiales opacos aparecerán en la refracción, ya que los materiales " "transparentes no aparecen en la textura de pantalla." msgid "The strength of the refraction effect." msgstr "La fuerza del efecto de refracción." msgid "" "Texture that controls the strength of the refraction per-pixel. Multiplied by " "[member refraction_scale]." msgstr "" "Textura que controla la fuerza de la refracción por píxel. Multiplicado por " "[member refraction_scale]." msgid "Sets the strength of the rim lighting effect." msgstr "Establece la fuerza del efecto de iluminación del borde." msgid "" "If [code]true[/code], rim effect is enabled. Rim lighting increases the " "brightness at glancing angles on an object.\n" "[b]Note:[/b] Rim lighting is not visible if the material's [member " "shading_mode] is [constant SHADING_MODE_UNSHADED]." msgstr "" "Si es [code]true[/code], se habilita el efecto de borde (rim). La iluminación " "de borde aumenta el brillo en ángulos rasantes sobre un objeto.\n" "[b]Nota:[/b] La iluminación de borde no es visible si el [member " "shading_mode] del material es [constant SHADING_MODE_UNSHADED]." msgid "" "Texture used to set the strength of the rim lighting effect per-pixel. " "Multiplied by [member rim]." msgstr "" "La textura utilizada para establecer la fuerza del efecto de iluminación del " "borde por píxel. Multiplicado por el [member rim]." msgid "" "The amount of to blend light and albedo color when rendering rim effect. If " "[code]0[/code] the light color is used, while [code]1[/code] means albedo " "color is used. An intermediate value generally works best." msgstr "" "La cantidad de luz de mezclia y el color del albedo cuando se renderiza el " "efecto de borde. Si se utiliza [code]0[/code] el color de la luz, mientras " "que [code]1[/code] significa que se utiliza el color del albedo. Un valor " "intermedio generalmente funciona mejor." msgid "" "Surface reflection. A value of [code]0[/code] represents a perfect mirror " "while a value of [code]1[/code] completely blurs the reflection. See also " "[member metallic]." msgstr "" "Reflexión de la superficie. Un valor de [code]0[/code] representa un espejo " "perfecto mientras que un valor de [code]1[/code] difumina completamente el " "reflejo. Véase también [member metallic]." msgid "" "Texture used to control the roughness per-pixel. Multiplied by [member " "roughness]." msgstr "" "La textura utilizada para controlar la rugosidad por píxel. Multiplicado por " "[member roughness]." msgid "" "Sets whether the shading takes place, per-pixel, per-vertex or unshaded. Per-" "vertex lighting is faster, making it the best choice for mobile applications, " "however it looks considerably worse than per-pixel. Unshaded rendering is the " "fastest, but disables all interactions with lights." msgstr "" "Establece si el sombreado se realiza por píxel, por vértice o sin sombreado. " "La iluminación por vértice es más rápida, lo que la convierte en la mejor " "opción para aplicaciones móviles; sin embargo, su aspecto es " "considerablemente peor que el de la iluminación por píxel. La renderización " "sin sombreado es la más rápida, pero desactiva todas las interacciones con " "las luces." msgid "" "If [code]true[/code], enables the \"shadow to opacity\" render mode where " "lighting modifies the alpha so shadowed areas are opaque and non-shadowed " "areas are transparent. Useful for overlaying shadows onto a camera feed in AR." msgstr "" "Si es [code]true[/code], habilita el modo de representación \"sombra a " "opacidad\" en el que la iluminación modifica el alfa de modo que las áreas " "sombreadas son opacas y las áreas no sombreadas son transparentes. Es útil " "para superponer sombras en una cámara de alimentación en AR." msgid "" "The method for rendering the specular blob.\n" "[b]Note:[/b] [member specular_mode] only applies to the specular blob. It " "does not affect specular reflections from the sky, screen-space reflections, " "[VoxelGI], SDFGI or [ReflectionProbe]s. To disable reflections from these " "sources as well, set [member metallic_specular] to [code]0.0[/code] instead." msgstr "" "Método para renderizar la mancha especular.\n" "[b]Nota:[/b] [member specular_mode] solo se aplica a la mancha especular. No " "afecta a las reflexiones especulares del cielo, las reflexiones en el espacio " "de la pantalla, [VoxelGI], SDFGI ni [ReflectionProbe]. Para desactivar " "también las reflexiones de estas fuentes, establezca [member " "metallic_specular] en [code]0.0[/code] en su lugar." msgid "The flags dictating how the stencil operation behaves." msgstr "Las banderas que dictan cómo se comporta la operación de plantilla." msgid "The outline thickness for [constant STENCIL_MODE_OUTLINE]." msgstr "El grosor del contorno para [constant STENCIL_MODE_OUTLINE]." msgid "The stencil reference value (0-255). Typically a power of 2." msgstr "" "El valor de referencia de la plantilla es (0-255). Normalmente una potencia " "de 2." msgid "" "If [code]true[/code], subsurface scattering is enabled. Emulates light that " "penetrates an object's surface, is scattered, and then emerges. Subsurface " "scattering quality is controlled by [member ProjectSettings.rendering/" "environment/subsurface_scattering/subsurface_scattering_quality].\n" "[b]Note:[/b] Subsurface scattering is not supported on viewports that have a " "transparent background (where [member Viewport.transparent_bg] is [code]true[/" "code])." msgstr "" "Si es [code]true[/code], se habilita la dispersión del subsuelo (subsurface " "scattering). Emula la luz que penetra en la superficie de un objeto, se " "dispersa y luego emerge. La calidad de la dispersión del subsuelo se controla " "mediante [member ProjectSettings.rendering/environment/subsurface_scattering/" "subsurface_scattering_quality].\n" "[b]Nota:[/b] La dispersión del subsuelo no es compatible con los viewports " "que tienen un fondo transparente (donde [member Viewport.transparent_bg] es " "[code]true[/code])." msgid "" "If [code]true[/code], subsurface scattering will use a special mode optimized " "for the color and density of human skin, such as boosting the intensity of " "the red channel in subsurface scattering." msgstr "" "Si es [code]true[/code], la dispersión subsuperficial utilizará un modo " "especial optimizado para el color y la densidad de la piel humana, como " "aumentar la intensidad del canal rojo en la dispersión subsuperficial." msgid "" "Texture used to control the subsurface scattering strength. Stored in the red " "texture channel. Multiplied by [member subsurf_scatter_strength]." msgstr "" "La textura utilizada para controlar la fuerza del subsurface scattering. Se " "almacena en el canal rojo de la textura. Multiplicado por [member " "subsurf_scatter_strength]." msgid "" "The texture to use for multiplying the intensity of the subsurface scattering " "transmittance intensity. See also [member subsurf_scatter_texture]. Ignored " "if [member subsurf_scatter_skin_mode] is [code]true[/code]." msgstr "" "La textura que se utilizará para multiplicar la intensidad de la " "transmitancia de dispersión subsuperficial. Véase también [member " "subsurf_scatter_texture]. Se ignora si [member subsurf_scatter_skin_mode] es " "[code]true[/code]." msgid "" "Filter flags for the texture.\n" "[b]Note:[/b] [member heightmap_texture] is always sampled with linear " "filtering, even if nearest-neighbor filtering is selected here. This is to " "ensure the heightmap effect looks as intended. If you need sharper height " "transitions between pixels, resize the heightmap texture in an image editor " "with nearest-neighbor filtering." msgstr "" "Indicadores de filtro para la textura.\n" "[b]Nota:[/b] [member heightmap_texture] siempre se muestrea con filtrado " "lineal, incluso si se selecciona el filtrado por vecino más cercano. Esto " "garantiza que el efecto de mapa de alturas se vea como se espera. Si necesita " "transiciones de altura más nítidas entre píxeles, cambie el tamaño de la " "textura del mapa de alturas en un editor de imágenes con filtrado por vecino " "más cercano." msgid "" "If [code]true[/code], the texture repeats when exceeding the texture's size. " "See [constant FLAG_USE_TEXTURE_REPEAT]." msgstr "" "Si es [code]true[/code], la textura se repite cuando se excede el tamaño de " "la textura. Véase [constant FLAG_USE_TEXTURE_REPEAT]." msgid "" "The material's transparency mode. Some transparency modes will disable shadow " "casting. Any transparency mode other than [constant TRANSPARENCY_DISABLED] " "has a greater performance impact compared to opaque rendering. See also " "[member blend_mode]." msgstr "" "El modo de transparencia del material. Algunos modos de transparencia " "deshabilitarán la proyección de sombras. Cualquier modo de transparencia " "distinto de [constant TRANSPARENCY_DISABLED] tiene un mayor impacto en el " "rendimiento en comparación con la representación opaca. Véase también [member " "blend_mode]." msgid "" "If [code]true[/code], enables parts of the shader required for " "[GPUParticles3D] trails to function. This also requires using a mesh with " "appropriate skinning, such as [RibbonTrailMesh] or [TubeTrailMesh]. Enabling " "this feature outside of materials used in [GPUParticles3D] meshes will break " "material rendering." msgstr "" "Si es [code]true[/code], habilita partes del sombreador necesarias para que " "funcionen los rastros de [GPUParticles3D]. Esto también requiere el uso de " "una malla con el skinning apropiado, como [RibbonTrailMesh] o " "[TubeTrailMesh]. Habilitar esta función fuera de los materiales utilizados en " "las mallas de [GPUParticles3D] provocará un error en la renderización del " "material." msgid "" "If [code]true[/code] use [member z_clip_scale] to scale the object being " "rendered towards the camera to avoid clipping into things like walls." msgstr "" "Si es [code]true[/code] usa [member z_clip_scale] para escalar el objeto que " "se está renderizando hacia la cámara para evitar que se recorte con cosas " "como paredes." msgid "" "If [code]true[/code], instead of using [code]UV[/code] textures will use a " "triplanar texture lookup to determine how to apply textures. Triplanar uses " "the orientation of the object's surface to blend between texture coordinates. " "It reads from the source texture 3 times, once for each axis and then blends " "between the results based on how closely the pixel aligns with each axis. " "This is often used for natural features to get a realistic blend of " "materials. Because triplanar texturing requires many more texture reads per-" "pixel it is much slower than normal UV texturing. Additionally, because it is " "blending the texture between the three axes, it is unsuitable when you are " "trying to achieve crisp texturing." msgstr "" "Si es [code]true[/code], en lugar de usar [code]UV[/code] las texturas usarán " "una búsqueda de texturas triplanares para determinar cómo aplicarlas. " "Triplanar usa la orientación de la superficie del objeto para mezclar entre " "las coordenadas de la textura. Lee de la textura fuente 3 veces, una para " "cada eje y luego se mezcla entre los resultados en base a cuán cerca se " "alinea el píxel con cada eje. Esto se utiliza a menudo para las " "características naturales para obtener una mezcla realista de los materiales. " "Debido a que la textura triplanar requiere muchas más lecturas de textura por " "píxel, es mucho más lenta que la textura UV normal. Además, debido a que está " "mezclando la textura entre los tres ejes, es inadecuado cuando se trata de " "lograr una textura nítida." msgid "" "A lower number blends the texture more softly while a higher number blends " "the texture more sharply.\n" "[b]Note:[/b] [member uv1_triplanar_sharpness] is clamped between [code]0.0[/" "code] and [code]150.0[/code] (inclusive) as values outside that range can " "look broken depending on the mesh." msgstr "" "Un número menor difumina la textura de forma más suave mientras que un número " "mayor la difumina de forma más marcada.\n" "[b]Nota:[/b] [member uv1_triplanar_sharpness] está limitado entre [code]0.0[/" "code] y [code]150.0[/code] (inclusivo) ya que los valores fuera de ese rango " "pueden verse quebrados dependiendo de la malla." msgid "" "If [code]true[/code], instead of using [code]UV2[/code] textures will use a " "triplanar texture lookup to determine how to apply textures. Triplanar uses " "the orientation of the object's surface to blend between texture coordinates. " "It reads from the source texture 3 times, once for each axis and then blends " "between the results based on how closely the pixel aligns with each axis. " "This is often used for natural features to get a realistic blend of " "materials. Because triplanar texturing requires many more texture reads per-" "pixel it is much slower than normal UV texturing. Additionally, because it is " "blending the texture between the three axes, it is unsuitable when you are " "trying to achieve crisp texturing." msgstr "" "Si es [code]true[/code], en lugar de usar [code]UV2[/code] las texturas " "usarán una búsqueda de texturas triplanares para determinar cómo aplicarlas. " "Triplanar usa la orientación de la superficie del objeto para mezclar entre " "las coordenadas de la textura. Lee de la textura fuente 3 veces, una para " "cada eje y luego se mezcla entre los resultados en base a cuán cerca se " "alinea el píxel con cada eje. Esto se utiliza a menudo para las " "características naturales para obtener una mezcla realista de los materiales. " "Debido a que la textura triplanar requiere muchas más lecturas de textura por " "píxel, es mucho más lenta que la textura UV normal. Además, debido a que está " "mezclando la textura entre los tres ejes, es inadecuado cuando se trata de " "lograr una textura nítida." msgid "" "A lower number blends the texture more softly while a higher number blends " "the texture more sharply.\n" "[b]Note:[/b] [member uv2_triplanar_sharpness] is clamped between [code]0.0[/" "code] and [code]150.0[/code] (inclusive) as values outside that range can " "look broken depending on the mesh." msgstr "" "Un número menor difumina la textura de forma más suave mientras que un número " "mayor la difumina de forma más nítida.\n" "[b]Nota:[/b] [member uv2_triplanar_sharpness] está limitado entre [code]0.0[/" "code] y [code]150.0[/code] (inclusive) ya que los valores fuera de ese rango " "pueden verse quebrados dependiendo de la malla." msgid "" "If [code]true[/code], vertex colors are considered to be stored in nonlinear " "sRGB encoding and are converted to linear encoding during rendering. If " "[code]false[/code], vertex colors are considered to be stored in linear " "encoding and are rendered as-is. See also [member " "albedo_texture_force_srgb].\n" "[b]Note:[/b] Only effective when using the Forward+ and Mobile rendering " "methods, not Compatibility." msgstr "" "Si es [code]true[/code], los colores de los vértices se consideran " "almacenados en codificación sRGB no lineal y se convierten a codificación " "lineal durante la renderización. Si es [code]false[/code], los colores de los " "vértices se consideran almacenados en codificación lineal y se renderizan tal " "cual. Véase también [member albedo_texture_force_srgb].\n" "[b]Nota:[/b] Solo es efectivo cuando se usan los Forward+ y Mobile métodos de " "renderizado, no Compatibility." msgid "If [code]true[/code], the vertex color is used as albedo color." msgstr "" "Si es [code]true[/code], el color del vértice se utiliza como color del " "albedo." msgid "" "Scales the object being rendered towards the camera to avoid clipping into " "things like walls. This is intended to be used for objects that are fixed " "with respect to the camera like player arms, tools, etc. Lighting and shadows " "will continue to work correctly when this setting is adjusted, but screen-" "space effects like SSAO and SSR may break with lower scales. Therefore, try " "to keep this setting as close to [code]1.0[/code] as possible." msgstr "" "Escala el objeto que se está renderizando hacia la cámara para evitar que se " "adhiera a elementos como paredes. Esto está pensado para objetos fijos con " "respecto a la cámara, como brazos de jugador, herramientas, etc. La " "iluminación y las sombras seguirán funcionando correctamente al ajustar esta " "configuración, pero los efectos de espacio de pantalla como SSAO y SSR " "podrían fallar con escalas más bajas. Por lo tanto, intente mantener esta " "configuración lo más cerca posible de [code]1.0[/code]." msgid "Texture specifying per-pixel color." msgstr "Textura que especifica el color por píxel." msgid "Texture specifying per-pixel metallic value." msgstr "Textura que especifica el valor metálico por píxel." msgid "Texture specifying per-pixel roughness value." msgstr "Textura que especifica el valor de rugosidad por píxel." msgid "Texture specifying per-pixel emission color." msgstr "Textura que especifica el color de emisión por píxel." msgid "Texture specifying per-pixel normal vector." msgstr "Textura que especifica el vector normal por píxel." msgid "Texture specifying per-pixel rim value." msgstr "Textura que especifica el valor del borde por píxel." msgid "Texture specifying per-pixel clearcoat value." msgstr "Textura que especifica el valor del barniz por píxel." msgid "" "Texture specifying per-pixel flowmap direction for use with [member " "anisotropy]." msgstr "" "Textura que especifica la dirección del mapa de flujo por píxel para su uso " "con [member anisotropy]." msgid "Texture specifying per-pixel ambient occlusion value." msgstr "Textura que especifica el valor de oclusión ambiental por píxel." msgid "Texture specifying per-pixel height." msgstr "Textura que especifica la altura por píxel." msgid "Texture specifying per-pixel subsurface scattering." msgstr "Textura que especifica la subsurface scattering por pixel." msgid "Texture specifying per-pixel backlight color." msgstr "Textura que especifica el color de luz de fondo por píxel." msgid "Texture specifying per-pixel refraction strength." msgstr "Textura que especifica la fuerza de refracción por píxel." msgid "Texture specifying per-pixel detail mask blending value." msgstr "" "Textura que especifica el valor de mezcla de la máscara de detalles por píxel." msgid "Texture specifying per-pixel detail color." msgstr "Textura que especifica el color de detalle por píxel." msgid "Texture specifying per-pixel detail normal." msgstr "La textura que especifica el detalle de la normal por píxel." msgid "Texture holding ambient occlusion, roughness, and metallic." msgstr "" "Textura que conserva la oclusión ambiental, la rugosidad y el aspecto " "metálico." msgid "Represents the size of the [enum TextureParam] enum." msgstr "Representa el tamaño del enum [enum TextureParam]." msgid "" "The texture filter reads from the nearest pixel only. This makes the texture " "look pixelated from up close, and grainy from a distance (due to mipmaps not " "being sampled)." msgstr "" "El filtro de textura lee solo del píxel más cercano. Esto hace que la textura " "se vea pixelada de cerca y granulada de lejos (debido a que los mipmaps no se " "muestrean)." msgid "" "The texture filter blends between the nearest 4 pixels. This makes the " "texture look smooth from up close, and grainy from a distance (due to mipmaps " "not being sampled)." msgstr "" "El filtro de textura mezcla entre los 4 píxeles más cercanos. Esto hace que " "la textura se vea suave de cerca y granulada de lejos (debido a que los " "mipmaps no se muestrean)." msgid "" "The texture filter reads from the nearest pixel and blends between the " "nearest 2 mipmaps (or uses the nearest mipmap if [member " "ProjectSettings.rendering/textures/default_filters/use_nearest_mipmap_filter] " "is [code]true[/code]). This makes the texture look pixelated from up close, " "and smooth from a distance." msgstr "" "El filtro de textura lee el píxel más cercano y combina los dos mipmaps más " "cercanos (o utiliza el mipmap más cercano si [member " "ProjectSettings.rendering/textures/default_filters/use_nearest_mipmap_filter] " "es [code]true[/code]). Esto hace que la textura se vea pixelada de cerca y " "suave de lejos." msgid "" "The texture filter blends between the nearest 4 pixels and between the " "nearest 2 mipmaps (or uses the nearest mipmap if [member " "ProjectSettings.rendering/textures/default_filters/use_nearest_mipmap_filter] " "is [code]true[/code]). This makes the texture look smooth from up close, and " "smooth from a distance." msgstr "" "El filtro de textura combina los 4 píxeles más cercanos con los 2 mipmaps más " "cercanos (o utiliza el mipmap más cercano si [member " "ProjectSettings.rendering/textures/default_filters/use_nearest_mipmap_filter] " "es [code]true[/code]). Esto hace que la textura se vea suave de cerca y suave " "de lejos." msgid "" "The texture filter reads from the nearest pixel and blends between 2 mipmaps " "(or uses the nearest mipmap if [member ProjectSettings.rendering/textures/" "default_filters/use_nearest_mipmap_filter] is [code]true[/code]) based on the " "angle between the surface and the camera view. This makes the texture look " "pixelated from up close, and smooth from a distance. Anisotropic filtering " "improves texture quality on surfaces that are almost in line with the camera, " "but is slightly slower. The anisotropic filtering level can be changed by " "adjusting [member ProjectSettings.rendering/textures/default_filters/" "anisotropic_filtering_level]." msgstr "" "El filtro de textura lee desde el píxel más cercano y mezcla entre 2 mipmaps " "(o usa el mipmap más cercano si [member ProjectSettings.rendering/textures/" "default_filters/use_nearest_mipmap_filter] es [code] true [/code] ) según el " "ángulo entre la superficie y la vista de la cámara. Esto hace que la textura " "se vea pixelada de cerca y suave de lejos. El filtrado anisotrópico mejora la " "calidad de la textura en superficies que están casi alineadas con la cámara, " "pero es ligeramente más lento. El nivel de filtrado anisotrópico se puede " "cambiar ajustando [member ProjectSettings.rendering/textures/default_filters/" "anisotropic_filtering_level]." msgid "" "The texture filter blends between the nearest 4 pixels and blends between 2 " "mipmaps (or uses the nearest mipmap if [member ProjectSettings.rendering/" "textures/default_filters/use_nearest_mipmap_filter] is [code]true[/code]) " "based on the angle between the surface and the camera view. This makes the " "texture look smooth from up close, and smooth from a distance. Anisotropic " "filtering improves texture quality on surfaces that are almost in line with " "the camera, but is slightly slower. The anisotropic filtering level can be " "changed by adjusting [member ProjectSettings.rendering/textures/" "default_filters/anisotropic_filtering_level]." msgstr "" "El filtro de textura combina entre los 4 píxeles más cercanos y entre 2 " "mipmaps (o usa el mipmap más cercano si [member ProjectSettings.rendering/" "textures/default_filters/use_nearest_mipmap_filter] es [code] true [/code] ) " "según el ángulo entre la superficie y la vista de la cámara. Esto hace que la " "textura se vea suave de cerca y de lejos. El filtrado anisotrópico mejora la " "calidad de la textura en superficies que están casi alineadas con la cámara, " "pero es ligeramente más lento. El nivel de filtrado anisotrópico se puede " "cambiar ajustando [member ProjectSettings.rendering/textures/default_filters/" "anisotropic_filtering_level]." msgid "Represents the size of the [enum TextureFilter] enum." msgstr "Representa el tamaño del enum [enum TextureFilter]." msgid "Use [code]UV[/code] with the detail texture." msgstr "Usa [code]UV[/code] con la textura de detalle." msgid "Use [code]UV2[/code] with the detail texture." msgstr "Usa [code]UV2[/code] con la textura de detalle." msgid "The material will not use transparency. This is the fastest to render." msgstr "El material no usará transparencia. Es el más rápido de renderizar." msgid "" "The material will use the texture's alpha values for transparency. This is " "the slowest to render, and disables shadow casting." msgstr "" "El material utilizará los valores alfa de la textura para la transparencia. " "Este es el método más lento de renderizado y desactiva la proyección de " "sombras." msgid "" "The material will cut off all values below a threshold, the rest will remain " "opaque. The opaque portions will be rendered in the depth prepass. This is " "faster to render than alpha blending, but slower than opaque rendering. This " "also supports casting shadows." msgstr "" "El material cortará todos los valores por debajo de un umbral, el resto " "permanecerá opaco. Las porciones opacas se renderizarán en el pre-paso de " "profundidad. Esto es más rápido de renderizar que la mezcla alfa, pero más " "lento que el renderizado opaco. Esto también admite la proyección de sombras." msgid "" "The material will use the texture's alpha value for transparency, but will " "discard fragments with an alpha of less than 0.99 during the depth prepass " "and fragments with an alpha less than 0.1 during the shadow pass. This also " "supports casting shadows." msgstr "" "El material utilizará el valor alfa de la textura para la transparencia, pero " "descartará los fragmentos con un alfa inferior a 0,99 durante el pre-paso de " "profundidad y los fragmentos con un alfa inferior a 0,1 durante el paso de " "sombra. Esto también admite la proyección de sombras." msgid "Represents the size of the [enum Transparency] enum." msgstr "Representa el tamaño del enum [enum Transparency]." msgid "" "The object will not receive shadows. This is the fastest to render, but it " "disables all interactions with lights." msgstr "" "El objeto no recibirá sombras. Es la forma más rápida de renderizar, pero " "desactiva todas las interacciones con las luces." msgid "" "The object will be shaded per pixel. Useful for realistic shading effects." msgstr "" "El objeto se sombreará por píxel. Útil para efectos de sombreado realistas." msgid "" "The object will be shaded per vertex. Useful when you want cheaper shaders " "and do not care about visual quality." msgstr "" "El objeto se sombreará por vértice. Útil cuando se quieren shaders más " "económicos y no importa la calidad visual." msgid "Represents the size of the [enum ShadingMode] enum." msgstr "Representa el tamaño del enum [enum ShadingMode]." msgid "Constant for setting [member emission_enabled]." msgstr "Constante para establecer [member emission_enabled]." msgid "Constant for setting [member normal_enabled]." msgstr "Constante para establecer [member normal_enabled]." msgid "Constant for setting [member rim_enabled]." msgstr "Constante para establecer [member rim_enabled]." msgid "Constant for setting [member clearcoat_enabled]." msgstr "Constante para establecer [member clearcoat_enabled]." msgid "Constant for setting [member anisotropy_enabled]." msgstr "Constante para establecer [member anisotropy_enabled]." msgid "Constant for setting [member ao_enabled]." msgstr "Constante para establecer [member ao_enabled]." msgid "Constant for setting [member heightmap_enabled]." msgstr "Constante para establecer [member heightmap_enabled]." msgid "Constant for setting [member subsurf_scatter_enabled]." msgstr "Constante para establecer [member subsurf_scatter_enabled]." msgid "Constant for setting [member subsurf_scatter_transmittance_enabled]." msgstr "" "Constante para establecer [member subsurf_scatter_transmittance_enabled]." msgid "Constant for setting [member backlight_enabled]." msgstr "Constante para establecer [member backlight_enabled]." msgid "Constant for setting [member refraction_enabled]." msgstr "Constante para establecer [member refraction_enabled]." msgid "Constant for setting [member detail_enabled]." msgstr "Constante para establecer [member detail_enabled]." msgid "Constant for setting [member bent_normal_enabled]." msgstr "Constante para establecer [member bent_normal_enabled]." msgid "Represents the size of the [enum Feature] enum." msgstr "Representa el tamaño del enum [enum Feature]." msgid "" "Default blend mode. The color of the object is blended over the background " "based on the object's alpha value." msgstr "" "Modo de mezcla por defecto. El color del objeto se mezcla sobre el fondo en " "base al valor alfa del objeto." msgid "The color of the object is added to the background." msgstr "El color del objeto se añade al fondo." msgid "The color of the object is subtracted from the background." msgstr "El color del objeto se resta del fondo." msgid "The color of the object is multiplied by the background." msgstr "El color del objeto se multiplica por el fondo." msgid "" "The color of the object is added to the background and the alpha channel is " "used to mask out the background. This is effectively a hybrid of the blend " "mix and add modes, useful for effects like fire where you want the flame to " "add but the smoke to mix. By default, this works with unshaded materials " "using premultiplied textures. For shaded materials, use the " "[code]PREMUL_ALPHA_FACTOR[/code] built-in so that lighting can be modulated " "as well." msgstr "" "El color del objeto se añade al fondo y el canal alfa se utiliza para " "enmascararlo. Esto es, en esencia, un híbrido de los modos de mezcla y " "adición, útil para efectos como el fuego, donde se desea que la llama se " "añada pero el humo se mezcle . Por defecto, esto funciona con materiales sin " "sombreado que utilizan texturas premultiplicadas. Para materiales con " "shaders, utilice el [code] PREMUL_ALPHA_FACTOR [/code] integrado para que la " "iluminación también pueda modularse." msgid "Disables Alpha AntiAliasing for the material." msgstr "Desactiva el suavizado de bordes alfa para el material." msgid "" "Enables AlphaToCoverage. Alpha values in the material are passed to the " "AntiAliasing sample mask." msgstr "" "Habilita AlphaToCoverage. Los valores alfa del material se pasan a la máscara " "de muestra de AntiAliasing." msgid "" "Enables AlphaToCoverage and forces all non-zero alpha values to [code]1[/" "code]. Alpha values in the material are passed to the AntiAliasing sample " "mask." msgstr "" "Habilita AlphaToCoverage y fuerza todos los valores alfa distintos de cero a " "[code]1[/code]. Los valores alfa del material se pasan a la máscara de " "muestra de AntiAliasing." msgid "" "Objects will write to depth during the opaque and the transparent passes. " "Transparent objects that are close to the camera may obscure other " "transparent objects behind them.\n" "[b]Note:[/b] This does not influence whether transparent objects are included " "in the depth prepass or not. For that, see [enum Transparency]." msgstr "" "Los objetos escribirán en profundidad durante los pases opaco y transparente. " "Los objetos transparentes que estén cerca de la cámara pueden ocultar otros " "objetos transparentes que estén detrás de ellos.\n" "[b]Nota:[/b] Esto no influye en si los objetos transparentes se incluyen o no " "en el pase previo de profundidad. Para ello, véase [enum Transparency]." msgid "" "Objects will not write their depth to the depth buffer, even during the depth " "prepass (if enabled)." msgstr "" "Los objetos no escribirán su profundidad en el búfer de profundidad, incluso " "durante el paso previo de profundidad (si está habilitado)." msgid "Depth test will discard the pixel if it is behind other pixels." msgstr "" "La prueba de profundidad descartará el píxel si está detrás de otros píxeles." msgid "" "Depth test will discard the pixel if it is in front of other pixels. Useful " "for stencil effects." msgstr "" "La prueba de profundidad descartará el píxel si se encuentra delante de otros " "píxeles. Útil para efectos de plantilla." msgid "" "Default cull mode. The back of the object is culled when not visible. Back " "face triangles will be culled when facing the camera. This results in only " "the front side of triangles being drawn. For closed-surface meshes, this " "means that only the exterior of the mesh will be visible." msgstr "" "Modo de eliminación predeterminado. La parte posterior del objeto se elimina " "cuando no es visible. Los triángulos de la cara posterior se eliminarán " "cuando estén orientados hacia la cámara. Esto da como resultado que solo se " "dibuje la cara frontal de los triángulos. Para mallas de superficie cerrada, " "esto significa que solo el exterior de la malla será visible." msgid "" "Front face triangles will be culled when facing the camera. This results in " "only the back side of triangles being drawn. For closed-surface meshes, this " "means that the interior of the mesh will be drawn instead of the exterior." msgstr "" "Los triángulos frontales se descartarán al mirar hacia la cámara. Esto " "significa que solo se dibujará la parte posterior de los triángulos. En " "mallas de superficie cerrada, se dibujará el interior de la malla en lugar " "del exterior." msgid "" "No face culling is performed; both the front face and back face will be " "visible." msgstr "" "No se realiza ningún recorte facial; tanto la cara frontal como la posterior " "serán visibles." msgid "Set [code]ALBEDO[/code] to the per-vertex color specified in the mesh." msgstr "" "Ponga [code]ALBEDO[/code] en el color por vértice especificado en la malla." msgid "" "Vertex colors are considered to be stored in nonlinear sRGB encoding and are " "converted to linear encoding during rendering. See also [member " "vertex_color_is_srgb].\n" "[b]Note:[/b] Only effective when using the Forward+ and Mobile rendering " "methods." msgstr "" "Los colores de los vértices se consideran almacenados en codificación sRGB no " "lineal y se convierten a codificación lineal durante la renderización. Véase " "también [member vertex_color_is_srgb].\n" "[b]Nota:[/b] Solo es efectivo al usar los métodos de renderización Forward+ y " "Mobile." msgid "" "Uses point size to alter the size of primitive points. Also changes the " "albedo texture lookup to use [code]POINT_COORD[/code] instead of [code]UV[/" "code]." msgstr "" "Utiliza el tamaño de los puntos para alterar el tamaño de los puntos " "primitivos. También cambia la búsqueda de la textura del albedo para usar " "[code]POINT_COORD[/code] en lugar de [code]UV[/code]." msgid "" "Object is scaled by depth so that it always appears the same size on screen." msgstr "" "El objeto se escala según la profundidad para que siempre aparezca del mismo " "tamaño en la pantalla." msgid "" "Use triplanar texture lookup for all texture lookups that would normally use " "[code]UV[/code]." msgstr "" "Use la búsqueda de texturas triplanares para todas las búsquedas de texturas " "que normalmente usarían [code]UV[/code]." msgid "" "Use triplanar texture lookup for all texture lookups that would normally use " "[code]UV2[/code]." msgstr "" "Use la búsqueda de texturas triplanares para todas las búsquedas de texturas " "que normalmente usarían [code]UV2[/code]." msgid "" "Use [code]UV2[/code] coordinates to look up from the [member ao_texture]." msgstr "" "Use las coordenadas [code]UV2[/code] para mirar hacia arriba desde el [member " "ao_texture]." msgid "" "Use [code]UV2[/code] coordinates to look up from the [member " "emission_texture]." msgstr "" "Utiliza las coordenadas [code]UV2[/code] para mirar hacia arriba desde la " "[member emission_texture]." msgid "Disables receiving shadows from other objects." msgstr "Desactiva la recepción de sombras de otros objetos." msgid "Disables receiving ambient light." msgstr "Desactiva la recepción de luz ambiental." msgid "Enables the shadow to opacity feature." msgstr "Habilita la característica de opacidad de la sombra." msgid "" "Enables the texture to repeat when UV coordinates are outside the 0-1 range. " "If using one of the linear filtering modes, this can result in artifacts at " "the edges of a texture when the sampler filters across the edges of the " "texture." msgstr "" "Permite que la textura se repita cuando las coordenadas UV están fuera del " "rango 0-1. Si se utiliza uno de los modos de filtrado lineal, esto puede " "generar artefactos en los bordes de una textura cuando el muestreador filtra " "a través de los bordes de la textura." msgid "" "Invert values read from a depth texture to convert them to height values " "(heightmap)." msgstr "" "Invierte los valores leídos de una textura de profundidad para convertirlos " "en valores de altura (mapa de alturas)." msgid "" "Enables the skin mode for subsurface scattering which is used to improve the " "look of subsurface scattering when used for human skin." msgstr "" "Habilita el modo de piel para la dispersión subsuperficial, que se utiliza " "para mejorar el aspecto de la dispersión subsuperficial cuando se utiliza " "para la piel humana." msgid "" "Enables parts of the shader required for [GPUParticles3D] trails to function. " "This also requires using a mesh with appropriate skinning, such as " "[RibbonTrailMesh] or [TubeTrailMesh]. Enabling this feature outside of " "materials used in [GPUParticles3D] meshes will break material rendering." msgstr "" "Permite que funcionen las partes del sombreador necesarias para las estelas " "de [GPUParticles3D]. Esto también requiere el uso de una malla con el " "skinning adecuado, como [RibbonTrailMesh] o [TubeTrailMesh]. Habilitar esta " "función fuera de los materiales utilizados en las mallas de [GPUParticles3D] " "provocará errores en la renderización del material." msgid "Enables multichannel signed distance field rendering shader." msgstr "" "Permite el sombreador de renderizado de campo de distancia con signo " "multicanal." msgid "Disables specular occlusion." msgstr "Desactiva la oclusión especular." msgid "Enables using [member z_clip_scale]." msgstr "Habilita el uso de [member z_clip_scale]." msgid "Enables using [member fov_override]." msgstr "Habilita el uso de [member fov_override]." msgid "Represents the size of the [enum Flags] enum." msgstr "Representa el tamaño del enum [enum Flags]." msgid "Default diffuse scattering algorithm." msgstr "Algoritmo de dispersión difusa por defecto." msgid "Diffuse scattering ignores roughness." msgstr "La dispersión difusa ignora las rugosidades." msgid "Extends Lambert to cover more than 90 degrees when roughness increases." msgstr "" "Extiende a Lambert para cubrir más de 90 grados cuando la rugosidad aumenta." msgid "Uses a hard cut for lighting, with smoothing affected by roughness." msgstr "" "Utiliza un corte duro para la iluminación, con el alisado afectado por la " "aspereza." msgid "" "Default specular blob.\n" "[b]Note:[/b] Forward+ uses multiscattering for more accurate reflections, " "although the impact of multiscattering is more noticeable on rough metallic " "surfaces than on smooth, non-metallic surfaces.\n" "[b]Note:[/b] Mobile and Compatibility don't perform multiscattering for " "performance reasons. Instead, they perform single scattering, which means " "rough metallic surfaces may look slightly darker than intended." msgstr "" "Mancha especular predeterminada.\n" "[b]Nota:[/b] Forward+ utiliza dispersión múltiple para obtener reflejos más " "precisos, aunque su impacto es más perceptible en superficies metálicas " "rugosas que en superficies lisas no metálicas.\n" "[b]Nota:[/b] Las versiones para móviles y compatibilidad no utilizan " "dispersión múltiple por motivos de rendimiento. En su lugar, utilizan " "dispersión simple, lo que significa que las superficies metálicas rugosas " "pueden verse ligeramente más oscuras de lo previsto." msgid "Toon blob which changes size based on roughness." msgstr "La mancha de un dibujo que cambia de tamaño en función de la rugosidad." msgid "" "No specular blob. This is slightly faster to render than other specular modes." msgstr "" "Sin mancha especular. Esto es ligeramente más rápido de renderizar que otros " "modos especulares." msgid "Billboard mode is disabled." msgstr "Modo Billboard esta desactivado." msgid "The object's Z axis will always face the camera." msgstr "El eje Z del objeto siempre estará de cara a la cámara." msgid "The object's X axis will always face the camera." msgstr "El eje X del objeto siempre estará de cara a la cámara." msgid "Used to read from the red channel of a texture." msgstr "Se usa para leer del canal rojo de una textura." msgid "Used to read from the green channel of a texture." msgstr "Se usa para leer del canal verde de una textura." msgid "Used to read from the blue channel of a texture." msgstr "Se usa para leer del canal azul de una textura." msgid "Used to read from the alpha channel of a texture." msgstr "Se usa para leer del canal de transparencia de una textura." msgid "Adds the emission color to the color from the emission texture." msgstr "Añade el color de la emisión al color de la textura de la emisión." msgid "Multiplies the emission color by the color from the emission texture." msgstr "" "Multiplica el color de la emisión por el color de la textura de la emisión." msgid "Do not use distance fade." msgstr "No utilizar el desvanecimiento de la distancia." msgid "" "Smoothly fades the object out based on each pixel's distance from the camera " "using the alpha channel." msgstr "" "Suavemente se desvanece el objeto en base a la distancia de cada píxel de la " "cámara usando el canal alfa." msgid "" "Stencil preset which applies an outline to the object.\n" "[b]Note:[/b] Requires a [member Material.next_pass] material which will be " "automatically applied. Any manual changes made to [member Material.next_pass] " "will be lost when the stencil properties are modified or the scene is " "reloaded. To safely apply a [member Material.next_pass] material on a " "material that uses stencil presets, use [member " "GeometryInstance3D.material_overlay] instead." msgstr "" "Preajuste de plantilla que aplica un contorno al objeto.\n" "[b]Nota:[/b] Requiere un material [member Material.next_pass] que se aplicará " "automáticamente. Cualquier cambio manual realizado en [member " "Material.next_pass] se perderá al modificar las propiedades de la plantilla o " "al recargar la escena. Para aplicar de forma segura un material [member " "Material.next_pass] sobre un material que utiliza preajustes de plantilla, " "utilice [member GeometryInstance3D.material_overlay] en su lugar." msgid "" "Stencil preset which shows a silhouette of the object behind walls.\n" "[b]Note:[/b] Requires a [member Material.next_pass] material which will be " "automatically applied. Any manual changes made to [member Material.next_pass] " "will be lost when the stencil properties are modified or the scene is " "reloaded. To safely apply a [member Material.next_pass] material on a " "material that uses stencil presets, use [member " "GeometryInstance3D.material_overlay] instead." msgstr "" "Plantilla que muestra la silueta del objeto detrás de las paredes.\n" "[b]Nota:[/b] Requiere un material [member Material.next_pass] que se aplicará " "automáticamente. Cualquier cambio manual realizado en [member " "Material.next_pass] se perderá al modificar las propiedades de la plantilla o " "al recargar la escena. Para aplicar de forma segura un material [member " "Material.next_pass] sobre un material que utiliza plantillas, utilice [member " "GeometryInstance3D.material_overlay] en su lugar." msgid "Enables stencil operations without a preset." msgstr "" "Permite realizar operaciones con plantillas sin necesidad de una " "configuración predefinida." msgid "" "The material will only be rendered where it passes a stencil comparison with " "existing stencil buffer values." msgstr "" "El material solo se renderizará si supera una comparación de plantilla con " "los valores de búfer de plantilla existentes." msgid "" "Passes the stencil test when the reference value is less than the existing " "stencil value." msgstr "" "Supera la prueba de plantilla cuando el valor de referencia es menor que el " "valor de plantilla existente." msgid "" "Passes the stencil test when the reference value is equal to the existing " "stencil value." msgstr "" "Supera la prueba de plantilla cuando el valor de referencia es igual al valor " "de plantilla existente." msgid "" "Passes the stencil test when the reference value is less than or equal to the " "existing stencil value." msgstr "" "Supera la prueba de plantilla cuando el valor de referencia es menor o igual " "al valor de plantilla existente." msgid "" "Passes the stencil test when the reference value is greater than the existing " "stencil value." msgstr "" "Supera la prueba de la plantilla cuando el valor de referencia es mayor que " "el valor de la plantilla existente." msgid "" "Passes the stencil test when the reference value is not equal to the existing " "stencil value." msgstr "" "Supera la prueba de plantilla cuando el valor de referencia no es igual al " "valor de plantilla existente." msgid "A 3×3 matrix for representing 3D rotation and scale." msgstr "Una matriz de 3×3 para representar la rotación y la escala 3D." msgid "Matrices and transforms" msgstr "Matrices y transformaciones" msgid "Using 3D transforms" msgstr "Usar transformaciones 3D" msgid "Matrix Transform Demo" msgstr "Demo de Transformación de Matriz" msgid "2.5D Game Demo" msgstr "Demo de Juego en 2.5D" msgid "" "Constructs a [Basis] identical to [constant IDENTITY].\n" "[b]Note:[/b] In C#, this constructs a [Basis] with all of its components set " "to [constant Vector3.ZERO]." msgstr "" "Construye una [Basis] idéntica a [constant IDENTITY].\n" "[b]Nota:[/b] En C#, esto construye una [Basis] con todos sus componentes " "establecidos a [constant Vector3.ZERO]." msgid "Constructs a [Basis] as a copy of the given [Basis]." msgstr "Construye una [Basis] como una copia de la [Basis] dada." msgid "" "Constructs a [Basis] that only represents rotation, rotated around the [param " "axis] by the given [param angle], in radians. The axis must be a normalized " "vector.\n" "[b]Note:[/b] This is the same as using [method rotated] on the [constant " "IDENTITY] basis. With more than one angle consider using [method from_euler], " "instead." msgstr "" "Construye una [Basis] que solo representa la rotación, girada alrededor del " "[param axis] según el [param angle] dado, en radianes. El eje debe ser un " "vector normalizado.\n" "[b]Nota:[/b] Esto es equivalente a usar [method rotated] en la base [constant " "IDENTITY]. Si se requiere más de un ángulo, considere usar [method " "from_euler]." msgid "" "Constructs a [Basis] that only represents rotation from the given " "[Quaternion].\n" "[b]Note:[/b] Quaternions [i]only[/i] store rotation, not scale. Because of " "this, conversions from [Basis] to [Quaternion] cannot always be reversed." msgstr "" "Construye una [Basis] que solo representa la rotación del [Quaternion] dado.\n" "[b]Nota:[/b] Los cuaterniones [i]solo[/i] almacenan rotación, no escala. Por " "esta razón, las conversiones de [Basis] a [Quaternion] no siempre se pueden " "revertir." msgid "" "Constructs a [Basis] from 3 axis vectors. These are the columns of the basis " "matrix." msgstr "" "Construye una [Basis] a partir de tres vectores de eje. Estas son las " "columnas de la matriz base." msgid "" "Constructs a new [Basis] that only represents scale, with no rotation or " "shear, from the given [param scale] vector.\n" "[codeblocks]\n" "[gdscript]\n" "var my_basis = Basis.from_scale(Vector3(2, 4, 8))\n" "\n" "print(my_basis.x) # Prints (2.0, 0.0, 0.0)\n" "print(my_basis.y) # Prints (0.0, 4.0, 0.0)\n" "print(my_basis.z) # Prints (0.0, 0.0, 8.0)\n" "[/gdscript]\n" "[csharp]\n" "var myBasis = Basis.FromScale(new Vector3(2.0f, 4.0f, 8.0f));\n" "\n" "GD.Print(myBasis.X); // Prints (2, 0, 0)\n" "GD.Print(myBasis.Y); // Prints (0, 4, 0)\n" "GD.Print(myBasis.Z); // Prints (0, 0, 8)\n" "[/csharp]\n" "[/codeblocks]\n" "[b]Note:[/b] In linear algebra, the matrix of this basis is also known as a " "[url=https://en.wikipedia.org/wiki/Diagonal_matrix]diagonal matrix[/url]." msgstr "" "Construye una nueva [Basis] que solo representa la escala, sin rotación ni " "deformación, a partir del vector [param scale] dado.\n" "[codeblocks]\n" "[gdscript]\n" "var my_basis = Basis.from_scale(Vector3(2, 4, 8))\n" "\n" "print(my_basis.x) # Imprime (2.0, 0.0, 0.0)\n" "print(my_basis.y) # Imprime (0.0, 4.0, 0.0)\n" "print(my_basis.z) # Imprime (0.0, 0.0, 8.0)\n" "[/gdscript]\n" "[csharp]\n" "var myBasis = Basis.FromScale(new Vector3(2.0f, 4.0f, 8.0f));\n" "\n" "GD.Print(myBasis.X); // Imprime (2, 0, 0)\n" "GD.Print(myBasis.Y); // Imprime (0, 4, 0)\n" "GD.Print(myBasis.Z); // Imprime (0, 0, 8)\n" "[/csharp]\n" "[/codeblocks]\n" "[b]Nota:[/b] En álgebra lineal, la matriz de esta base también se conoce como " "[url=https://en.wikipedia.org/wiki/Diagonal_matrix]matriz diagonal[/url]." msgid "" "Returns this basis's rotation as a [Quaternion].\n" "[b]Note:[/b] Quaternions are much more suitable for 3D math but are less " "intuitive. For user interfaces, consider using the [method get_euler] method, " "which returns Euler angles." msgstr "" "Devuelve la rotación de esta base como un [Quaternion].\n" "[b]Nota:[/b] Los cuaterniones son mucho más adecuados para matemáticas 3D, " "pero son menos intuitivos. Para interfaces de usuario, considere usar el " "método [method get_euler], que devuelve ángulos de Euler." msgid "" "Returns the length of each axis of this basis, as a [Vector3]. If the basis " "is not sheared, this value is the scaling factor. It is not affected by " "rotation.\n" "[codeblocks]\n" "[gdscript]\n" "var my_basis = Basis(\n" "\tVector3(2, 0, 0),\n" "\tVector3(0, 4, 0),\n" "\tVector3(0, 0, 8)\n" ")\n" "# Rotating the Basis in any way preserves its scale.\n" "my_basis = my_basis.rotated(Vector3.UP, TAU / 2)\n" "my_basis = my_basis.rotated(Vector3.RIGHT, TAU / 4)\n" "\n" "print(my_basis.get_scale()) # Prints (2.0, 4.0, 8.0)\n" "[/gdscript]\n" "[csharp]\n" "var myBasis = new Basis(\n" "\tVector3(2.0f, 0.0f, 0.0f),\n" "\tVector3(0.0f, 4.0f, 0.0f),\n" "\tVector3(0.0f, 0.0f, 8.0f)\n" ");\n" "// Rotating the Basis in any way preserves its scale.\n" "myBasis = myBasis.Rotated(Vector3.Up, Mathf.Tau / 2.0f);\n" "myBasis = myBasis.Rotated(Vector3.Right, Mathf.Tau / 4.0f);\n" "\n" "GD.Print(myBasis.Scale); // Prints (2, 4, 8)\n" "[/csharp]\n" "[/codeblocks]\n" "[b]Note:[/b] If the value returned by [method determinant] is negative, the " "scale is also negative." msgstr "" "Devuelve la longitud de cada eje de esta base como un [Vector3]. Si la base " "no se deforma, este valor es el factor de escala. No se ve afectado por la " "rotación.\n" "[codeblocks]\n" "[gdscript]\n" "var my_basis = Basis(\n" "\tVector3(2, 0, 0),\n" "\tVector3(0, 4, 0),\n" "\tVector3(0, 0, 8)\n" ")\n" "# Cualquier rotación de la base conserva su escala.\n" "my_basis = my_basis.rotated(Vector3.UP, TAU / 2)\n" "my_basis = my_basis.rotated(Vector3.RIGHT, TAU / 4)\n" "\n" "print(my_basis.get_scale()) # Imprime (2.0, 4.0, 8.0)\n" "[/gdscript]\n" "[csharp]\n" "var myBasis = new Basis(\n" "\tVector3(2.0f, 0.0f, 0.0f),\n" "\tVector3(0.0f, 4.0f, 0.0f),\n" "\tVector3(0.0f, 0.0f, 8.0f)\n" ");\n" "// Rotar la base de cualquier forma conserva su escala.\n" "myBasis = myBasis.Rotated(Vector3.Up, Mathf.Tau / 2.0f);\n" "myBasis = myBasis.Rotated(Vector3.Right, Mathf.Tau / 4.0f);\n" "\n" "GD.Print(myBasis.Scale); // Imprime (2, 4, 8)\n" "[/csharp]\n" "[/codeblocks]\n" "[b]Nota:[/b] Si el valor devuelto por el método [method determinant] es " "negativo, la escala también es negativa." msgid "" "Returns the [url=https://en.wikipedia.org/wiki/Invertible_matrix]inverse of " "this basis's matrix[/url]." msgstr "" "Devuelve la [url=https://en.wikipedia.org/wiki/Invertible_matrix]inversa de " "la matriz de esta base[/url]." msgid "" "Returns [code]true[/code] if this basis is conformal. A conformal basis is " "both [i]orthogonal[/i] (the axes are perpendicular to each other) and " "[i]uniform[/i] (the axes share the same length). This method can be " "especially useful during physics calculations." msgstr "" "Devuelve [code]true[/code] si esta base es conforme. Una base conforme es " "tanto [i]ortogonal[/i] (los ejes son perpendiculares entre sí) como " "[i]uniforme[/i] (los ejes comparten la misma longitud). Este método puede ser " "especialmente útil durante los cálculos físicos." msgid "" "Returns [code]true[/code] if this basis and [param b] are approximately " "equal, by calling [method @GlobalScope.is_equal_approx] on all vector " "components." msgstr "" "Devuelve [code]true[/code] si esta base y [param b] son aproximadamente " "iguales, llamando a [method @GlobalScope.is_equal_approx] en todos los " "componentes vectoriales." msgid "" "Returns [code]true[/code] if this basis is finite, by calling [method " "@GlobalScope.is_finite] on all vector components." msgstr "" "Devuelve [code]true[/code] si esta base es finita, llamando a [method " "@GlobalScope.is_finite] en todos los componentes vectoriales." msgid "" "Creates a new [Basis] with a rotation such that the forward axis (-Z) points " "towards the [param target] position.\n" "By default, the -Z axis (camera forward) is treated as forward (implies +X is " "right). If [param use_model_front] is [code]true[/code], the +Z axis (asset " "front) is treated as forward (implies +X is left) and points toward the " "[param target] position.\n" "The up axis (+Y) points as close to the [param up] vector as possible while " "staying perpendicular to the forward axis. The returned basis is " "orthonormalized (see [method orthonormalized]).\n" "The [param target] and the [param up] cannot be [constant Vector3.ZERO], and " "shouldn't be colinear to avoid unintended rotation around local Z axis." msgstr "" "Crea una nueva [Basis] con una rotación tal que el eje frontal (-Z) apunta " "hacia la posición [param target].\n" "Por defecto, el eje -Z (frontal de la cámara) se considera frontal (lo que " "implica que +X apunta a la derecha). Si [param use_model_front] es " "[code]true[/code], el eje +Z (frontal del objeto) se considera frontal (lo " "que implica que +X apunta a la izquierda) y apunta hacia la posición [param " "target].\n" "El eje vertical (+Y) apunta lo más cerca posible del vector [param up], " "manteniéndose perpendicular al eje frontal. La base resultante está " "ortonormalizada (véase [method orthonormalized]).\n" "[param target] y [param up] no pueden ser [constant Vector3.ZERO] y no deben " "ser colineales para evitar rotaciones no deseadas alrededor del eje Z local." msgid "" "Returns the orthonormalized version of this basis. An orthonormal basis is " "both [i]orthogonal[/i] (the axes are perpendicular to each other) and " "[i]normalized[/i] (the axes have a length of [code]1.0[/code]), which also " "means it can only represent a rotation.\n" "It is often useful to call this method to avoid rounding errors on a rotating " "basis:\n" "[codeblocks]\n" "[gdscript]\n" "# Rotate this Node3D every frame.\n" "func _process(delta):\n" "\tbasis = basis.rotated(Vector3.UP, TAU * delta)\n" "\tbasis = basis.rotated(Vector3.RIGHT, TAU * delta)\n" "\tbasis = basis.orthonormalized()\n" "[/gdscript]\n" "[csharp]\n" "// Rotate this Node3D every frame.\n" "public override void _Process(double delta)\n" "{\n" "\tBasis = Basis.Rotated(Vector3.Up, Mathf.Tau * (float)delta)\n" "\t\t\t.Rotated(Vector3.Right, Mathf.Tau * (float)delta)\n" "\t\t\t.Orthonormalized();\n" "}\n" "[/csharp]\n" "[/codeblocks]" msgstr "" "Devuelve la versión ortonormalizada de esta base. Una base ortonormal es " "tanto [i]ortogonal[/i] (los ejes son perpendiculares entre sí) como " "[i]normalizada[/i] (los ejes tienen una longitud de [code]1.0[/code]), lo que " "también significa que solo puede representar una rotación.\n" "A menudo resulta útil llamar a este método para evitar errores de redondeo en " "una base giratoria:\n" "[codeblocks]\n" "[gdscript]\n" "# Rota este Node3D en cada fotograma.\n" "func _process(delta):\n" "\tbasic = basis.rotated(Vector3.UP, TAU * delta)\n" "\tbasic = basis.rotated(Vector3.RIGHT, TAU * delta)\n" "\tbasic = basis.orthonormalized()\n" "[/gdscript]\n" "[csharp]\n" "// Rota este Node3D en cada fotograma.\n" "public override void _Process(double delta)\n" "{\n" "\tBasis = Basis.Rotated(Vector3.Up, Mathf.Tau * (float)delta)\n" "\t\t\t.Rotated(Vector3.Right, Mathf.Tau * (float)delta)\n" "\t\t\t.Orthonormalized();\n" "}\n" "[/csharp]\n" "[/codeblocks]" msgid "" "Returns a copy of this basis rotated around the given [param axis] by the " "given [param angle] (in radians).\n" "The [param axis] must be a normalized vector (see [method " "Vector3.normalized]). If [param angle] is positive, the basis is rotated " "counter-clockwise around the axis.\n" "[codeblocks]\n" "[gdscript]\n" "var my_basis = Basis.IDENTITY\n" "var angle = TAU / 2\n" "\n" "my_basis = my_basis.rotated(Vector3.UP, angle) # Rotate around the up axis " "(yaw).\n" "my_basis = my_basis.rotated(Vector3.RIGHT, angle) # Rotate around the right " "axis (pitch).\n" "my_basis = my_basis.rotated(Vector3.BACK, angle) # Rotate around the back " "axis (roll).\n" "[/gdscript]\n" "[csharp]\n" "var myBasis = Basis.Identity;\n" "var angle = Mathf.Tau / 2.0f;\n" "\n" "myBasis = myBasis.Rotated(Vector3.Up, angle); // Rotate around the up axis " "(yaw).\n" "myBasis = myBasis.Rotated(Vector3.Right, angle); // Rotate around the right " "axis (pitch).\n" "myBasis = myBasis.Rotated(Vector3.Back, angle); // Rotate around the back " "axis (roll).\n" "[/csharp]\n" "[/codeblocks]" msgstr "" "Devuelve una copia de esta base rotada alrededor del eje [param axis] dado, " "con el ángulo [param angle] dado (en radianes).\n" "El eje [param axis] debe ser un vector normalizado (véase [method " "Vector3.normalized]). Si el ángulo [param angle] es positivo, la base se rota " "en sentido antihorario alrededor del eje.\n" "[codeblocks]\n" "[gdscript]\n" "var my_basis = Basis.IDENTITY\n" "var angle = TAU / 2\n" "\n" "my_basis = my_basis.rotated(Vector3.UP, angle) # Rotar alrededor del eje " "vertical (guiñada).\n" "my_basis = my_basis.rotated(Vector3.RIGHT, angle) # Rotar alrededor del eje " "horizontal (cabeceo).\n" "my_basis = my_basis.rotated(Vector3.BACK, angle) # Rotar alrededor del eje " "vertical (balanceo).\n" "[/gdscript]\n" "[csharp]\n" "var myBasis = Basis.Identity;\n" "var ángulo = Mathf.Tau / 2.0f;\n" "\n" "myBasis = myBasis.Rotated(Vector3.Up, ángulo); // Rotar alrededor del " "eje vertical (guiñada).\n" "myBasis = myBasis.Rotated(Vector3.Right, ángulo); // Rotar alrededor del eje " "horizontal (cabeceo).\n" "myBasis = myBasis.Rotated(Vector3.Back, ángulo); // Rotar alrededor del eje " "vertical (balanceo).\n" "[/csharp]\n" "[/codeblocks]" msgid "" "Returns this basis with each axis's components scaled by the given [param " "scale]'s components.\n" "The basis matrix's rows are multiplied by [param scale]'s components. This " "operation is a global scale (relative to the parent).\n" "[codeblocks]\n" "[gdscript]\n" "var my_basis = Basis(\n" "\tVector3(1, 1, 1),\n" "\tVector3(2, 2, 2),\n" "\tVector3(3, 3, 3)\n" ")\n" "my_basis = my_basis.scaled(Vector3(0, 2, -2))\n" "\n" "print(my_basis.x) # Prints (0.0, 2.0, -2.0)\n" "print(my_basis.y) # Prints (0.0, 4.0, -4.0)\n" "print(my_basis.z) # Prints (0.0, 6.0, -6.0)\n" "[/gdscript]\n" "[csharp]\n" "var myBasis = new Basis(\n" "\tnew Vector3(1.0f, 1.0f, 1.0f),\n" "\tnew Vector3(2.0f, 2.0f, 2.0f),\n" "\tnew Vector3(3.0f, 3.0f, 3.0f)\n" ");\n" "myBasis = myBasis.Scaled(new Vector3(0.0f, 2.0f, -2.0f));\n" "\n" "GD.Print(myBasis.X); // Prints (0, 2, -2)\n" "GD.Print(myBasis.Y); // Prints (0, 4, -4)\n" "GD.Print(myBasis.Z); // Prints (0, 6, -6)\n" "[/csharp]\n" "[/codeblocks]" msgstr "" "Devuelve esta base con los componentes de cada eje escalados según los " "componentes de [param scale] especificados.\n" "Las filas de la matriz base se multiplican por los componentes de [param " "scale]. Esta operación aplica una escala global (relativa a la matriz " "padre).\n" "[codeblocks]\n" "[gdscript]\n" "var my_basis = Basis(\n" "\tVector3(1, 1, 1),\n" "\tVector3(2, 2, 2),\n" "\tVector3(3, 3, 3)\n" ")\n" "my_basis = my_basis.scaled(Vector3(0, 2, -2))\n" "\n" "print(my_basis.x) # Imprime (0.0, 2.0, -2.0)\n" "print(my_basis.y) # Imprime (0.0, 4.0, -4.0)\n" "print(my_basis.z) # Imprime (0.0, 6.0, -6.0)\n" "[/gdscript]\n" "[csharp]\n" "var myBasis = new Basis(\n" "\tnew Vector3(1.0f, 1.0f, 1.0f),\n" "\tnew Vector3(2.0f, 2.0f, 2.0f),\n" "\tnew Vector3(3.0f, 3.0f, 3.0f)\n" "\n" "myBasis = myBasis.Scaled(new Vector3(0.0f, 2.0f, -2.0f));\n" "\n" "GD.Print(myBasis.X); // Imprime (0, 2, -2)\n" "GD.Print(myBasis.Y); // Imprime (0, 4, -4)\n" "GD.Print(myBasis.Z); // Imprime (0, 6, -6)\n" "[/csharp]\n" "[/codeblocks]" msgid "" "Returns this basis with each axis scaled by the corresponding component in " "the given [param scale].\n" "The basis matrix's columns are multiplied by [param scale]'s components. This " "operation is a local scale (relative to self).\n" "[codeblocks]\n" "[gdscript]\n" "var my_basis = Basis(\n" " Vector3(1, 1, 1),\n" " Vector3(2, 2, 2),\n" " Vector3(3, 3, 3)\n" ")\n" "my_basis = my_basis.scaled_local(Vector3(0, 2, -2))\n" "\n" "print(my_basis.x) # Prints (0.0, 0.0, 0.0)\n" "print(my_basis.y) # Prints (4.0, 4.0, 4.0)\n" "print(my_basis.z) # Prints (-6.0, -6.0, -6.0)\n" "[/gdscript]\n" "[csharp]\n" "var myBasis = new Basis(\n" " new Vector3(1.0f, 1.0f, 1.0f),\n" " new Vector3(2.0f, 2.0f, 2.0f),\n" " new Vector3(3.0f, 3.0f, 3.0f)\n" ");\n" "myBasis = myBasis.ScaledLocal(new Vector3(0.0f, 2.0f, -2.0f));\n" "\n" "GD.Print(myBasis.X); // Prints (0, 0, 0)\n" "GD.Print(myBasis.Y); // Prints (4, 4, 4)\n" "GD.Print(myBasis.Z); // Prints (-6, -6, -6)\n" "[/csharp]\n" "[/codeblocks]" msgstr "" "Devuelve esta base con cada eje escalado por el componente correspondiente en " "el parámetro [param scale].\n" "Las columnas de la matriz base se multiplican por los componentes de [param " "scale]. Esta operación es una escala local (relativa a sí misma).\n" "[codeblocks]\n" "[gdscript]\n" "var my_basis = Basis(\n" " Vector3(1, 1, 1),\n" " Vector3(2, 2, 2),\n" " Vector3(3, 3, 3)\n" ")\n" "my_basis = my_basis.scaled_local(Vector3(0, 2, -2))\n" "\n" "print(my_basis.x) # Imprime (0.0, 0.0, 0.0)\n" "print(my_basis.y) # Imprime (4.0, 4.0, 4.0)\n" "print(my_basis.z) # Imprime (-6.0, -6.0, -6.0)\n" "[/gdscript]\n" "[csharp]\n" "var myBasis = new Basis(\n" " new Vector3(1.0f, 1.0f, 1.0f),\n" " new Vector3(2.0f, 2.0f, 2.0f),\n" " new Vector3(3.0f, 3.0f, 3.0f)\n" ");\n" "myBasis = myBasis.ScaledLocal(new Vector3(0.0f, 2.0f, -2.0f));\n" "\n" "GD.Print(myBasis.X); // Imprime (0, 0, 0)\n" "GD.Print(myBasis.Y); // Imprime (4, 4, 4)\n" "GD.Print(myBasis.Z); // Imprime (-6, -6, -6)\n" "[/csharp]\n" "[/codeblocks]" msgid "" "Performs a spherical-linear interpolation with the [param to] basis, given a " "[param weight]. Both this basis and [param to] should represent a rotation.\n" "[b]Example:[/b] Smoothly rotate a [Node3D] to the target basis over time, " "with a [Tween]:\n" "[codeblock]\n" "var start_basis = Basis.IDENTITY\n" "var target_basis = Basis.IDENTITY.rotated(Vector3.UP, TAU / 2)\n" "\n" "func _ready():\n" "\tcreate_tween().tween_method(interpolate, 0.0, 1.0, " "5.0).set_trans(Tween.TRANS_EXPO)\n" "\n" "func interpolate(weight):\n" "\tbasis = start_basis.slerp(target_basis, weight)\n" "[/codeblock]" msgstr "" "Realiza una interpolación esférica lineal con la base [param to], dado un " "[param weight]. Tanto esta base como [param to] deben representar una " "rotación.\n" "[b]Ejemplo:[/b] Rota suavemente un [Node3D] a la base objetivo a lo largo del " "tiempo, con un [Tween]:\n" "[codeblock]\n" "var start_basis = Basis.IDENTITY\n" "var target_basis = Basis.IDENTITY.rotated(Vector3.UP, TAU / 2)\n" "\n" "func _ready():\n" "\tcreate_tween().tween_method(interpolate, 0.0, 1.0, " "5.0).set_trans(Tween.TRANS_EXPO)\n" "\n" "func interpolate(weight):\n" "\tbasic = start_basis.slerp(target_basis, weight)\n" "[/codeblock]" msgid "" "Returns the transposed dot product between [param with] and the [member x] " "axis (see [method transposed]).\n" "This is equivalent to [code]basis.x.dot(vector)[/code]." msgstr "" "Devuelve el producto escalar transpuesto entre [param with] y el eje [member " "x] (ver [method transposed]).\n" "Esto es equivalente a [code]basis.x.dot(vector)[/code]." msgid "" "Returns the transposed dot product between [param with] and the [member y] " "axis (see [method transposed]).\n" "This is equivalent to [code]basis.y.dot(vector)[/code]." msgstr "" "Devuelve el producto escalar transpuesto entre [param with] y el eje [member " "y] (ver [method transposed]).\n" "Esto es equivalente a [code]basis.y.dot(vector)[/code]." msgid "" "Returns the transposed dot product between [param with] and the [member z] " "axis (see [method transposed]).\n" "This is equivalent to [code]basis.z.dot(vector)[/code]." msgstr "" "Devuelve el producto escalar transpuesto entre [param with] y el eje [member " "z] (ver [method transposed]).\n" "Esto es equivalente a [code]basis.z.dot(vector)[/code]." msgid "" "Returns the transposed version of this basis. This turns the basis matrix's " "columns into rows, and its rows into columns.\n" "[codeblocks]\n" "[gdscript]\n" "var my_basis = Basis(\n" "\tVector3(1, 2, 3),\n" "\tVector3(4, 5, 6),\n" "\tVector3(7, 8, 9)\n" ")\n" "my_basis = my_basis.transposed()\n" "\n" "print(my_basis.x) # Prints (1.0, 4.0, 7.0)\n" "print(my_basis.y) # Prints (2.0, 5.0, 8.0)\n" "print(my_basis.z) # Prints (3.0, 6.0, 9.0)\n" "[/gdscript]\n" "[csharp]\n" "var myBasis = new Basis(\n" "\tnew Vector3(1.0f, 2.0f, 3.0f),\n" "\tnew Vector3(4.0f, 5.0f, 6.0f),\n" "\tnew Vector3(7.0f, 8.0f, 9.0f)\n" ");\n" "myBasis = myBasis.Transposed();\n" "\n" "GD.Print(myBasis.X); // Prints (1, 4, 7)\n" "GD.Print(myBasis.Y); // Prints (2, 5, 8)\n" "GD.Print(myBasis.Z); // Prints (3, 6, 9)\n" "[/csharp]\n" "[/codeblocks]" msgstr "" "Devuelve la versión transpuesta de esta base. Esto convierte las columnas de " "la matriz base en filas y sus filas en columnas.\n" "[codeblocks]\n" "[gdscript]\n" "var my_basis = Basis(\n" "\tVector3(1, 2, 3),\n" "\tVector3(4, 5, 6),\n" "\tVector3(7, 8, 9)\n" ")\n" "my_basis = my_basis.transposed()\n" "\n" "print(my_basis.x) # Imprime (1.0, 4.0, 7.0)\n" "print(my_basis.y) # Imprime (2.0, 5.0, 8.0)\n" "print(my_basis.z) # Imprime (3.0, 6.0, 9.0)\n" "[/gdscript]\n" "[csharp]\n" "var myBasis = new Basis(\n" "\tnew Vector3(1.0f, 2.0f, 3.0f),\n" "\tnew Vector3(4.0f, 5.0f, 6.0f),\n" "\tnew Vector3(7.0f, 8.0f, 9.0f)\n" ");\n" "myBasis = myBasis.Transposed();\n" "\n" "GD.Print(myBasis.X); // Imprime (1, 4, 7)\n" "GD.Print(myBasis.Y); // Imprime (2, 5, 8)\n" "GD.Print(myBasis.Z); // Imprime (3, 6, 9)\n" "[/csharp]\n" "[/codeblocks]" msgid "" "The basis's X axis, and the column [code]0[/code] of the matrix.\n" "On the identity basis, this vector points right ([constant Vector3.RIGHT])." msgstr "" "El eje X de la base y la columna [code]0[/code] de la matriz.\n" "En la base identidad, este vector apunta a la derecha ([constant " "Vector3.RIGHT])." msgid "" "The basis's Y axis, and the column [code]1[/code] of the matrix.\n" "On the identity basis, this vector points up ([constant Vector3.UP])." msgstr "" "El eje Y de la base y la columna [code]1[/code] de la matriz.\n" "En la base identidad, este vector apunta hacia arriba ([constant Vector3.UP])." msgid "" "The basis's Z axis, and the column [code]2[/code] of the matrix.\n" "On the identity basis, this vector points back ([constant Vector3.BACK])." msgstr "" "El eje Z de la base y la columna [code]2[/code] de la matriz.\n" "En la base identidad, este vector apunta hacia atrás ([constant " "Vector3.BACK])." msgid "" "The identity [Basis]. This is an orthonormal basis with no rotation, no " "shear, and a scale of [constant Vector3.ONE]. This also means that:\n" "- The [member x] points right ([constant Vector3.RIGHT]);\n" "- The [member y] points up ([constant Vector3.UP]);\n" "- The [member z] points back ([constant Vector3.BACK]).\n" "[codeblock]\n" "var basis = Basis.IDENTITY\n" "print(\"| X | Y | Z\")\n" "print(\"| %.f | %.f | %.f\" % [basis.x.x, basis.y.x, basis.z.x])\n" "print(\"| %.f | %.f | %.f\" % [basis.x.y, basis.y.y, basis.z.y])\n" "print(\"| %.f | %.f | %.f\" % [basis.x.z, basis.y.z, basis.z.z])\n" "# Prints:\n" "# | X | Y | Z\n" "# | 1 | 0 | 0\n" "# | 0 | 1 | 0\n" "# | 0 | 0 | 1\n" "[/codeblock]\n" "If a [Vector3] or another [Basis] is transformed (multiplied) by this " "constant, no transformation occurs.\n" "[b]Note:[/b] In GDScript, this constant is equivalent to creating a " "[constructor Basis] without any arguments. It can be used to make your code " "clearer, and for consistency with C#." msgstr "" "La identidad [Basis]. Esta es una base ortonormal sin rotación, sin " "cizallamiento y con una escala de [constant Vector3.ONE]. Esto también " "significa que:\n" "- El elemento [member x] apunta a la derecha ([constant Vector3.RIGHT]);\n" "- El elemento [member y] apunta hacia arriba ([constant Vector3.UP]);\n" "- El elemento [member z] apunta hacia atrás ([constant Vector3.BACK]).\n" "[codeblock]\n" "var basis = Basis.IDENTITY\n" "print(\"| X | Y | Z\")\n" "print(\"| %.f | %.f | %.f\" % [basis.x.x, basis.y.x, basis.z.x])\n" "print(\"| %.f | %.f | %.f\" % [basis.x.y, basis.y.y, basis.z.y])\n" "print(\"| %.f | %.f | %.f\" % [basis.x.z, basis.y.z, basis.z.z])\n" "# Imprime:\n" "# | X | Y | Z\n" "# | 1 | 0 | 0\n" "# | 0 | 1 | 0\n" "# | 0 | 0 | 1\n" "[/codeblock]\n" "Si un [Vector3] u otro [Basis] se transforma (multiplica) por esta constante, " "no se produce ninguna transformación.\n" "[b]Nota:[/b] En GDScript, esta constante equivale a crear un [constructor " "Basis] sin argumentos. Se puede usar para que el código sea más claro y para " "mantener la coherencia con C#." msgid "" "When any basis is multiplied by [constant FLIP_X], it negates all components " "of the [member x] axis (the X column).\n" "When [constant FLIP_X] is multiplied by any basis, it negates the [member " "Vector3.x] component of all axes (the X row)." msgstr "" "Cuando cualquier base se multiplica por [constant FLIP_X], se invierten todos " "los componentes del eje [member x] (la columna X).\n" "Cuando [constant FLIP_X] se multiplica por cualquier base, se invierte el " "componente [member Vector3.x] de todos los ejes (la fila X)." msgid "" "When any basis is multiplied by [constant FLIP_Y], it negates all components " "of the [member y] axis (the Y column).\n" "When [constant FLIP_Y] is multiplied by any basis, it negates the [member " "Vector3.y] component of all axes (the Y row)." msgstr "" "Cuando cualquier base se multiplica por [constant FLIP_Y], se invierten todos " "los componentes del eje [member y] (la columna Y).\n" "Cuando [constant FLIP_Y] se multiplica por cualquier base, se invierte el " "componente [member Vector3.y] de todos los ejes (la fila Y)." msgid "" "When any basis is multiplied by [constant FLIP_Z], it negates all components " "of the [member z] axis (the Z column).\n" "When [constant FLIP_Z] is multiplied by any basis, it negates the [member " "Vector3.z] component of all axes (the Z row)." msgstr "" "Cuando cualquier base se multiplica por [constant FLIP_Z], se anulan todos " "los componentes del eje [member z] (la columna Z).\n" "Cuando [constant FLIP_Z] se multiplica por cualquier base, se anula el " "componente [member Vector3.z] de todos los ejes (la fila Z)." msgid "" "Returns [code]true[/code] if the components of both [Basis] matrices are not " "equal.\n" "[b]Note:[/b] Due to floating-point precision errors, consider using [method " "is_equal_approx] instead, which is more reliable." msgstr "" "Devuelve [code]true[/code] si los componentes de ambas matrices [Basis] no " "son iguales.\n" "[b]Nota:[/b] Debido a errores de precisión de punto flotante, considera usar " "[method is_equal_approx] en su lugar, ya que es más confiable." msgid "" "Transforms (multiplies) the [param right] basis by this basis.\n" "This is the operation performed between parent and child [Node3D]s." msgstr "" "Transforma (multiplica) la base [param right] por esta base.\n" "Esta es la operación que se realiza entre los nodos [Node3D] padre e hijo." msgid "" "Transforms (multiplies) the [param right] vector by this basis, returning a " "[Vector3].\n" "[codeblocks]\n" "[gdscript]\n" "# Basis that swaps the X/Z axes and doubles the scale.\n" "var my_basis = Basis(Vector3(0, 2, 0), Vector3(2, 0, 0), Vector3(0, 0, 2))\n" "print(my_basis * Vector3(1, 2, 3)) # Prints (4.0, 2.0, 6.0)\n" "[/gdscript]\n" "[csharp]\n" "// Basis that swaps the X/Z axes and doubles the scale.\n" "var myBasis = new Basis(new Vector3(0, 2, 0), new Vector3(2, 0, 0), new " "Vector3(0, 0, 2));\n" "GD.Print(myBasis * new Vector3(1, 2, 3)); // Prints (4, 2, 6)\n" "[/csharp]\n" "[/codeblocks]" msgstr "" "Transforma (multiplica) el vector [param right] por esta base, devolviendo un " "[Vector3].\n" "[codeblocks]\n" "[gdscript]\n" "# Base que intercambia los ejes X/Z y duplica la escala.\n" "var my_basis = Basis(Vector3(0, 2, 0), Vector3(2, 0, 0), Vector3(0, 0, 2))\n" "print(my_basis * Vector3(1, 2, 3)) # Imprime (4.0, 2.0, 6.0)\n" "[/gdscript]\n" "[csharp]\n" "// Base que intercambia los ejes X/Z y duplica la escala.\n" "var myBasis = new Basis(new Vector3(0, 2, 0), new Vector3(2, 0, 0), new " "Vector3(0, 0, 2));\n" "GD.Print(myBasis * new Vector3(1, 2, 3)); // Imprime (4, 2, 6)\n" "[/csharp]\n" "[/codeblocks]" msgid "" "Multiplies all components of the [Basis] by the given [float]. This affects " "the basis's scale uniformly, resizing all 3 axes by the [param right] value." msgstr "" "Multiplica todos los componentes de la [Basis] por el [float] dado. Esto " "afecta a la escala de la base de forma uniforme, redimensionando los 3 ejes " "por el valor de [param right]." msgid "" "Multiplies all components of the [Basis] by the given [int]. This affects the " "basis's scale uniformly, resizing all 3 axes by the [param right] value." msgstr "" "Multiplica todos los componentes de la [Basis] por el [int] dado. Esto afecta " "a la escala de la base de forma uniforme, redimensionando los 3 ejes por el " "valor de [param right]." msgid "" "Divides all components of the [Basis] by the given [float]. This affects the " "basis's scale uniformly, resizing all 3 axes by the [param right] value." msgstr "" "Divide todos los componentes de la [Basis] por el [float] dado. Esto afecta a " "la escala de la base de forma uniforme, redimensionando los 3 ejes por el " "valor de [param right]." msgid "" "Divides all components of the [Basis] by the given [int]. This affects the " "basis's scale uniformly, resizing all 3 axes by the [param right] value." msgstr "" "Divide todos los componentes de la [Basis] por el [int] dado. Esto afecta a " "la escala de la base de forma uniforme, redimensionando los 3 ejes por el " "valor de [param right]." msgid "" "Returns [code]true[/code] if the components of both [Basis] matrices are " "exactly equal.\n" "[b]Note:[/b] Due to floating-point precision errors, consider using [method " "is_equal_approx] instead, which is more reliable." msgstr "" "Devuelve [code]true[/code] si los componentes de ambas matrices [Basis] son " "exactamente iguales.\n" "[b]Nota:[/b] Debido a errores de precisión de punto flotante, considera usar " "[method is_equal_approx] en su lugar, ya que es más confiable." msgid "" "Accesses each axis (column) of this basis by their index. Index [code]0[/" "code] is the same as [member x], index [code]1[/code] is the same as [member " "y], and index [code]2[/code] is the same as [member z].\n" "[b]Note:[/b] In C++, this operator accesses the rows of the basis matrix, " "[i]not[/i] the columns. For the same behavior as scripting languages, use the " "[code]set_column[/code] and [code]get_column[/code] methods." msgstr "" "Accede a cada eje (columna) de esta base por su índice. El índice [code]0[/" "code] es lo mismo que [member x], el índice [code]1[/code] es lo mismo que " "[member y], y el índice [code]2[/code] es lo mismo que [member z].\n" "[b]Nota:[/b] En C++, este operador accede a las filas de la matriz de la " "base, [i]no[/i] a las columnas. Para el mismo comportamiento que los " "lenguajes de script, usa los métodos [code]set_column[/code] y " "[code]get_column[/code]." msgid "Boolean matrix." msgstr "Matriz booleana." msgid "" "A two-dimensional array of boolean values, can be used to efficiently store a " "binary matrix (every matrix element takes only one bit) and query the values " "using natural cartesian coordinates." msgstr "" "Un array bidimensional de valores booleanos, puede ser usada para almacenar " "eficientemente un array binario (cada elemento del array toma sólo un bit) y " "consultar los valores usando coordenadas cartesianas naturales." msgid "" "Returns an image of the same size as the bitmap and with an [enum " "Image.Format] of type [constant Image.FORMAT_L8]. [code]true[/code] bits of " "the bitmap are being converted into white pixels, and [code]false[/code] bits " "into black." msgstr "" "Devuelve una imagen del mismo tamaño que el mapa de bits y con un [enum " "Image.Format] de tipo [constant Image.FORMAT_L8]. Los bits [code]true[/code] " "del mapa de bits se convierten en píxeles blancos, y los bits [code]false[/" "code] en negros." msgid "" "Creates a bitmap with the specified size, filled with [code]false[/code]." msgstr "" "Crea un mapa de bits con el tamaño especificado, lleno de [code]false[/code]." msgid "" "Creates a bitmap that matches the given image dimensions, every element of " "the bitmap is set to [code]false[/code] if the alpha value of the image at " "that position is equal to [param threshold] or less, and [code]true[/code] in " "other case." msgstr "" "Crea un mapa de bits que coincide con las dimensiones de la imagen dada, cada " "elemento del mapa de bits se establece en [code]false[/code] si el valor alfa " "de la imagen en esa posición es igual o menor que [param threshold], y " "[code]true[/code] en caso contrario." msgid "Returns bitmap's value at the specified position." msgstr "Devuelve el valor del mapa de bits en la posición especificada." msgid "Returns bitmap's dimensions." msgstr "Devuelve las dimensiones del mapa de bits." msgid "Returns the number of bitmap elements that are set to [code]true[/code]." msgstr "" "Devuelve el número de elementos del mapa de bits que están configurados como " "[code]true[/code]." msgid "" "Applies morphological dilation or erosion to the bitmap. If [param pixels] is " "positive, dilation is applied to the bitmap. If [param pixels] is negative, " "erosion is applied to the bitmap. [param rect] defines the area where the " "morphological operation is applied. Pixels located outside the [param rect] " "are unaffected by [method grow_mask]." msgstr "" "Aplica la dilatación o erosión morfológica al mapa de bits. Si [param pixels] " "es positivo, se aplica la dilatación al mapa de bits. Si [param pixels] es " "negativo, se aplica la erosión al mapa de bits. [param rect] define el área " "donde se aplica la operación morfológica. Los píxeles situados fuera de " "[param rect] no se ven afectados por [method grow_mask]." msgid "Resizes the image to [param new_size]." msgstr "Redimensiona la imagen a [param new_size]." msgid "" "Sets the bitmap's element at the specified position, to the specified value." msgstr "" "Establece el elemento del mapa de bits en la posición especificada, al valor " "especificado." msgid "Sets a rectangular portion of the bitmap to the specified value." msgstr "" "Establece una porción rectangular del mapa de bits al valor especificado." msgid "" "Mix blending mode. Colors are assumed to be independent of the alpha " "(opacity) value." msgstr "" "Modo de mezcla. Se supone que los colores son independientes del valor alfa " "(opacidad)." msgid "Additive blending mode." msgstr "Modo de mezcla de añadidos." msgid "Subtractive blending mode." msgstr "Modo de mezcla de substracción." msgid "Multiplicative blending mode." msgstr "Modo de mezcla multiplicativo." msgid "A joint used with [Skeleton2D] to control and animate other nodes." msgstr "" "Una articulación utilizada con [Skeleton2D] para controlar y animar otros " "nodos." msgid "" "A hierarchy of [Bone2D]s can be bound to a [Skeleton2D] to control and " "animate other [Node2D] nodes.\n" "You can use [Bone2D] and [Skeleton2D] nodes to animate 2D meshes created with " "the [Polygon2D] UV editor.\n" "Each bone has a [member rest] transform that you can reset to with [method " "apply_rest]. These rest poses are relative to the bone's parent.\n" "If in the editor, you can set the rest pose of an entire skeleton using a " "menu option, from the code, you need to iterate over the bones to set their " "individual rest poses." msgstr "" "Puedes usar una jerarquía de [Bone2D] unida a un [Skeleton2D] para controlar " "y animar otros nodos [Node2D].\n" "Puedes usar nodos [Bone2D] y [Skeleton2D] para animar mallas 2D creadas con " "el editor UV de [Polygon2D].\n" "Cada hueso tiene una transformación [member rest] a la que puedes restablecer " "con [method apply_rest]. Estas poses de reposo son relativas al padre del " "hueso.\n" "Si estás en el editor, puedes establecer la pose de reposo de un esqueleto " "entero usando una opción del menú, desde el código, necesitas iterar sobre " "los huesos para establecer sus poses de reposo individuales." msgid "" "Resets the bone to the rest pose. This is equivalent to setting [member " "Node2D.transform] to [member rest]." msgstr "" "Restablece el hueso a la pose de reposo. Esto es equivalente a establecer " "[member Node2D.transform] a [member rest]." msgid "" "Returns whether this [Bone2D] is going to autocalculate its length and bone " "angle using its first [Bone2D] child node, if one exists. If there are no " "[Bone2D] children, then it cannot autocalculate these values and will print a " "warning." msgstr "" "Devuelve si este [Bone2D] va a calcular automáticamente su longitud y ángulo " "del hueso usando su primer nodo hijo [Bone2D], si existe uno. Si no hay hijos " "[Bone2D], no puede calcular automáticamente estos valores e imprimirá una " "advertencia." msgid "" "Returns the angle of the bone in the [Bone2D].\n" "[b]Note:[/b] This is different from the [Bone2D]'s rotation. The bone's angle " "is the rotation of the bone shown by the gizmo, which is unaffected by the " "[Bone2D]'s [member Node2D.transform]." msgstr "" "Devuelve el ángulo del hueso en el [Bone2D].\n" "[b]Nota:[/b] Esto es diferente de la rotación del [Bone2D]. El ángulo del " "hueso es la rotación del hueso que muestra el gizmo, que no se ve afectado " "por la [member Node2D.transform] del [Bone2D]." msgid "" "Returns the node's index as part of the entire skeleton. See [Skeleton2D]." msgstr "" "Devuelve el índice del nodo como parte de todo el esqueleto. Ver [Skeleton2D]." msgid "Returns the length of the bone in the [Bone2D] node." msgstr "Devuelve la longitud del hueso en el nodo [Bone2D]." msgid "" "Returns the node's [member rest] [Transform2D] if it doesn't have a parent, " "or its rest pose relative to its parent." msgstr "" "Devuelve el [member rest] [Transform2D] del nodo si no tiene un padre, o su " "pose de reposo relativa a su padre." msgid "" "When set to [code]true[/code], the [Bone2D] node will attempt to " "automatically calculate the bone angle and length using the first child " "[Bone2D] node, if one exists. If none exist, the [Bone2D] cannot " "automatically calculate these values and will print a warning." msgstr "" "Cuando se establece en [code]true[/code], el nodo [Bone2D] intentará calcular " "automáticamente el ángulo y la longitud del hueso utilizando el primer nodo " "hijo [Bone2D], si existe. Si no existe ninguno, [Bone2D] no podrá calcular " "automáticamente estos valores e imprimirá una advertencia." msgid "" "Sets the bone angle for the [Bone2D]. This is typically set to the rotation " "from the [Bone2D] to a child [Bone2D] node.\n" "[b]Note:[/b] This is different from the [Bone2D]'s rotation. The bone's angle " "is the rotation of the bone shown by the gizmo, which is unaffected by the " "[Bone2D]'s [member Node2D.transform]." msgstr "" "Establece el ángulo del hueso para el [Bone2D]. Esto normalmente se establece " "a la rotación del [Bone2D] a un nodo hijo [Bone2D].\n" "[b]Nota:[/b] Esto es diferente de la rotación del [Bone2D]. El ángulo del " "hueso es la rotación del hueso que muestra el gizmo, que no se ve afectado " "por la [member Node2D.transform] del [Bone2D]." msgid "Sets the length of the bone in the [Bone2D]." msgstr "Establece la longitud del hueso en el [Bone2D]." msgid "" "Rest transform of the bone. You can reset the node's transforms to this value " "using [method apply_rest]." msgstr "" "La transformación en reposo del hueso. Puedes reajustar las transformaciones " "del nodo a este valor usando [method apply_rest]." msgid "" "А node that dynamically copies or overrides the 3D transform of a bone in its " "parent [Skeleton3D]." msgstr "" "Un nodo que copia u omite dinámicamente la transformación 3D de un hueso en " "su [Skeleton3D] padre." msgid "" "This node selects a bone in a [Skeleton3D] and attaches to it. This means " "that the [BoneAttachment3D] node will either dynamically copy or override the " "3D transform of the selected bone." msgstr "" "Este nodo selecciona un hueso en un [Skeleton3D] y se adjunta a él. Esto " "significa que el nodo [BoneAttachment3D] copiará dinámicamente o " "sobrescribirá la transformación 3D del hueso seleccionado." msgid "" "Returns the parent or external [Skeleton3D] node if it exists, otherwise " "returns [code]null[/code]." msgstr "" "Devuelve el nodo [Skeleton3D] padre o externo si existe, de lo contrario " "devuelve [code]null[/code]." msgid "" "A function that is called automatically when the [Skeleton3D] is updated. " "This function is where the [BoneAttachment3D] node updates its position so it " "is correctly bound when it is [i]not[/i] set to override the bone pose." msgstr "" "Una función que se llama automáticamente cuando se actualiza el [Skeleton3D]. " "Esta función es donde el nodo [BoneAttachment3D] actualiza su posición para " "que esté correctamente vinculado cuando [i]no[/i] está configurado para " "sobrescribir la pose del hueso." msgid "The index of the attached bone." msgstr "El índice del hueso adjunto." msgid "The name of the attached bone." msgstr "El nombre del hueso unido." msgid "The [NodePath] to the external [Skeleton3D] node." msgstr "El [NodePath] al nodo [Skeleton3D] externo." msgid "" "Whether the [BoneAttachment3D] node will override the bone pose of the bone " "it is attached to. When set to [code]true[/code], the [BoneAttachment3D] node " "can change the pose of the bone. When set to [code]false[/code], the " "[BoneAttachment3D] will always be set to the bone's transform.\n" "[b]Note:[/b] This override performs interruptively in the skeleton update " "process using signals due to the old design. It may cause unintended behavior " "when used at the same time with [SkeletonModifier3D]." msgstr "" "Indica si el nodo [BoneAttachment3D] va a sobrescribir la pose del hueso al " "que está adjunto. Cuando se establece en [code]true[/code], el nodo " "[BoneAttachment3D] puede cambiar la pose del hueso. Cuando se establece en " "[code]false[/code], el [BoneAttachment3D] siempre se establecerá en la " "transformación del hueso.\n" "[b]Nota:[/b] Esta sobrescritura se realiza de forma interrumpida en el " "proceso de actualización del esqueleto mediante señales debido al antiguo " "diseño. Puede causar un comportamiento no deseado cuando se utiliza al mismo " "tiempo que [SkeletonModifier3D]." msgid "" "Whether the [BoneAttachment3D] node will use an external [Skeleton3D] node " "rather than attempting to use its parent node as the [Skeleton3D]. When set " "to [code]true[/code], the [BoneAttachment3D] node will use the external " "[Skeleton3D] node set in [member external_skeleton]." msgstr "" "Indica si el nodo [BoneAttachment3D] usará un nodo [Skeleton3D] externo en " "lugar de intentar usar su nodo padre como [Skeleton3D]. Cuando se establece " "en [code]true[/code], el nodo [BoneAttachment3D] usará el nodo [Skeleton3D] " "externo establecido en [member external_skeleton]." msgid "A node that may modify Skeleton3D's bone with associating the two bones." msgstr "" "Un nodo que puede modificar el hueso de Skeleton3D asociando los dos huesos." msgid "Clear all settings." msgstr "Borra todos los ajustes." msgid "" "Returns the apply bone of the setting at [param index]. This bone will be " "modified." msgstr "" "Devuelve el hueso de aplicación del ajuste en [param index]. Este hueso será " "modificado." msgid "" "Returns the apply bone name of the setting at [param index]. This bone will " "be modified." msgstr "" "Devuelve el nombre del hueso de aplicación del ajuste en [param index]. Este " "hueso será modificado." msgid "" "Returns the reference bone of the setting at [param index].\n" "This bone will be only referenced and not modified by this modifier." msgstr "" "Devuelve el hueso de referencia del ajuste en [param index].\n" "Este hueso solo será referenciado y no modificado por este modificador." msgid "" "Returns the reference bone name of the setting at [param index].\n" "This bone will be only referenced and not modified by this modifier." msgstr "" "Devuelve el nombre del hueso de referencia del ajuste en [param index].\n" "Este hueso solo será referenciado y no modificado por este modificador." msgid "" "Returns the reference target type of the setting at [param index]. See also " "[enum ReferenceType]." msgstr "" "Devuelve el tipo de objetivo de referencia de la configuración en [param " "index]. Véase también [enum ReferenceType]. Este hueso solo será referenciado " "y no modificado por este modificador." msgid "Returns the number of settings in the modifier." msgstr "Devuelve el número de ajustes en el modificador." msgid "Sets the apply amount of the setting at [param index] to [param amount]." msgstr "" "Establece la cantidad de aplicación del ajuste en [param index] a [param " "amount]." msgid "" "Sets the apply bone of the setting at [param index] to [param bone]. This " "bone will be modified." msgstr "" "Establece el hueso de aplicación del ajuste en [param index] a [param bone]. " "Este hueso será modificado." msgid "" "Sets the apply bone of the setting at [param index] to [param bone_name]. " "This bone will be modified." msgstr "" "Establece el hueso de aplicación del ajuste en [param index] a [param " "bone_name]. Este hueso será modificado." msgid "" "Sets the reference bone of the setting at [param index] to [param bone].\n" "This bone will be only referenced and not modified by this modifier." msgstr "" "Establece el hueso de referencia del ajuste en [param index] a [param bone].\n" "Este hueso solo será referenciado y no modificado por este modificador." msgid "" "Sets the reference bone of the setting at [param index] to [param " "bone_name].\n" "This bone will be only referenced and not modified by this modifier." msgstr "" "Establece el hueso de referencia del ajuste en [param index] a [param " "bone_name].\n" "Este hueso solo será referenciado y no modificado por este modificador." msgid "" "Sets the reference target type of the setting at [param index] to [param " "type]. See also [enum ReferenceType]." msgstr "" "Establece el objetivo (target) de referencia del ajuste en [param index] a " "[param type]. Véase también [enum ReferenceType]." msgid "Sets the number of settings in the modifier." msgstr "Establece el número de ajustes en el modificador." msgid "" "The reference target is a bone. In this case, the reference target spaces is " "local space." msgstr "" "El objetivo de referencia es un hueso. En este caso, el espacio del objetivo " "de referencia es el espacio local." msgid "" "The reference target is a [Node3D]. In this case, the reference target spaces " "is model space.\n" "In other words, the reference target's coordinates are treated as if it were " "placed directly under [Skeleton3D] which parent of the [BoneConstraint3D]." msgstr "" "El objetivo de referencia es un [Node3D]. En este caso, el espacio del " "objetivo de referencia es el espacio del modelo.\n" "En otras palabras, las coordenadas del objetivo de referencia se tratan como " "si estuviera ubicado directamente debajo de [Skeleton3D], que a su vez es " "padre de [BoneConstraint3D]." msgid "" "Describes a mapping of bone names for retargeting [Skeleton3D] into common " "names defined by a [SkeletonProfile]." msgstr "" "Describe una asignación de nombres de huesos para redirigir [Skeleton3D] a " "nombres comunes definidos por un [SkeletonProfile]." msgid "" "This class contains a dictionary that uses a list of bone names in " "[SkeletonProfile] as key names.\n" "By assigning the actual [Skeleton3D] bone name as the key value, it maps the " "[Skeleton3D] to the [SkeletonProfile]." msgstr "" "Esta clase contiene un diccionario que usa una lista de nombres de huesos en " "[SkeletonProfile] como nombres de clave.\n" "Al asignar el nombre del hueso [Skeleton3D] real como valor de la clave, " "asigna el [Skeleton3D] al [SkeletonProfile]." msgid "Retargeting 3D Skeletons" msgstr "Reorientación de esqueletos 3D" msgid "" "Returns a profile bone name having [param skeleton_bone_name]. If not found, " "an empty [StringName] will be returned.\n" "In the retargeting process, the returned bone name is the bone name of the " "target skeleton." msgstr "" "Devuelve un nombre de hueso de perfil que tiene [param skeleton_bone_name]. " "Si no se encuentra, se devolverá un [StringName] vacío.\n" "En el proceso de retargeting, el nombre del hueso devuelto es el nombre del " "hueso del esqueleto de destino." msgid "" "Returns a skeleton bone name is mapped to [param profile_bone_name].\n" "In the retargeting process, the returned bone name is the bone name of the " "source skeleton." msgstr "" "Devuelve el nombre de un hueso del esqueleto que está asignado a [param " "profile_bone_name].\n" "En el proceso de retargeting, el nombre del hueso devuelto es el nombre del " "hueso del esqueleto de origen." msgid "" "Maps a skeleton bone name to [param profile_bone_name].\n" "In the retargeting process, the setting bone name is the bone name of the " "source skeleton." msgstr "" "Asigna un nombre de hueso del esqueleto a [param profile_bone_name].\n" "En el proceso de retargeting, el nombre del hueso de ajuste es el nombre del " "hueso del esqueleto de origen." msgid "" "A [SkeletonProfile] of the mapping target. Key names in the [BoneMap] are " "synchronized with it." msgstr "" "Un [SkeletonProfile] del objetivo de la asignación. Los nombres de las claves " "en el [BoneMap] están sincronizados con él." msgid "" "This signal is emitted when change the key value in the [BoneMap]. This is " "used to validate mapping and to update [BoneMap] editor." msgstr "" "Esta señal se emite cuando cambia el valor de la clave en el [BoneMap]. Esto " "se utiliza para validar la asignación y para actualizar el editor [BoneMap]." msgid "" "This signal is emitted when change the value in profile or change the " "reference of profile. This is used to update key names in the [BoneMap] and " "to redraw the [BoneMap] editor." msgstr "" "Esta señal se emite cuando cambia el valor de la clave en el perfil o cambia " "la referencia del perfil. Esto se utiliza para actualizar los nombres de las " "claves en el [BoneMap] y para volver a dibujar el editor del [BoneMap]." msgid "" "A node that propagates and disperses the child bone's twist to the parent " "bones." msgstr "" "Un nodo que propaga y dispersa la torsión del hueso hijo hacia los huesos " "padres." msgid "Clears all settings." msgstr "Limpia todos los ajustes." msgid "" "Returns the damping curve when [method get_disperse_mode] is [constant " "DISPERSE_MODE_CUSTOM]." msgstr "" "Devuelve la curva de amortiguación cuando [method get_disperse_mode] es " "[constant DISPERSE_MODE_CUSTOM]." msgid "" "Returns whether to use automatic amount assignment or to allow manual " "assignment." msgstr "" "Devuelve si se debe usar la asignación automática de importes o permitir la " "asignación manual." msgid "Returns the end bone index of the bone chain." msgstr "Devuelve el índice del hueso final de la cadena de huesos." msgid "Returns the end bone name of the bone chain." msgstr "Devuelve el nombre del hueso final de la cadena de huesos." msgid "Returns the bone index at [param joint] in the bone chain's joint list." msgstr "" "Devuelve el índice del hueso en la articulación [param joint] de la lista de " "articulaciones de la cadena de huesos." msgid "Returns the bone name at [param joint] in the bone chain's joint list." msgstr "" "Devuelve el nombre del hueso en la articulación [param joint] de la lista de " "articulaciones de la cadena de huesos." msgid "Returns the joint count of the bone chain's joint list." msgstr "" "Devuelve el número de articulaciones de la lista de articulaciones de la " "cadena de huesos." msgid "" "Returns the twist amount at [param joint] in the bone chain's joint list when " "[method get_disperse_mode] is [constant DISPERSE_MODE_CUSTOM]." msgstr "" "Devuelve la cantidad de torsión en [param joint] en la lista de " "articulaciones de la cadena de huesos cuando [method get_disperse_mode] es " "[constant DISPERSE_MODE_CUSTOM]." msgid "Returns the root bone index of the bone chain." msgstr "Devuelve el índice del hueso raíz de la cadena de huesos." msgid "Returns the root bone name of the bone chain." msgstr "Devuelve el nombre del hueso raíz de la cadena de huesos." msgid "" "Returns the position at which to divide the segment between joints for weight " "assignment when [method get_disperse_mode] is [constant " "DISPERSE_MODE_WEIGHTED]." msgstr "" "Devuelve la posición en la que dividir el segmento entre articulaciones para " "la asignación de peso cuando [method get_disperse_mode] es [constant " "DISPERSE_MODE_WEIGHTED]." msgid "" "Sets the damping curve when [method get_disperse_mode] is [constant " "DISPERSE_MODE_CUSTOM]." msgstr "" "Fija la curva de amortiguación cuando [method get_disperse_mode] es [constant " "DISPERSE_MODE_CUSTOM]." msgid "" "Sets whether to use automatic amount assignment or to allow manual assignment." msgstr "" "Establece si se debe utilizar la asignación automática de importes o permitir " "la asignación manual." msgid "Sets the end bone index of the bone chain." msgstr "Establece el índice del hueso final de la cadena de huesos." msgid "" "Sets the end bone tail direction of the bone chain when [method " "is_end_bone_extended] is [code]true[/code]." msgstr "" "Establece la dirección de la cola del hueso final de la cadena de huesos " "cuando [method is_end_bone_extended] es [code]true[/code]." msgid "" "If [param enabled] is [code]true[/code], the end bone is extended to have a " "tail.\n" "If [param enabled] is [code]false[/code], [method get_reference_bone] becomes " "a parent of the end bone and it uses the vector to the end bone as a twist " "axis." msgstr "" "Si [param enabled] es [code]true[/code], el hueso final se extiende para " "tener una cola.\n" "Si [param enabled] es [code]false[/code], [method get_reference_bone] se " "convierte en padre del hueso final y utiliza el vector hacia el hueso final " "como eje de torsión." msgid "" "Sets the twist amount at [param joint] in the bone chain's joint list when " "[method get_disperse_mode] is [constant DISPERSE_MODE_CUSTOM]." msgstr "" "Establece la cantidad de torsión en [param joint] en la lista de " "articulaciones de la cadena de huesos cuando [method get_disperse_mode] es " "[constant DISPERSE_MODE_CUSTOM]." msgid "Sets the root bone index of the bone chain." msgstr "Establece el índice del hueso raíz de la cadena de huesos." msgid "Sets the root bone name of the bone chain." msgstr "Establece el nombre del hueso raíz de la cadena de huesos." msgid "" "Sets the rotation to an arbitrary state before twisting for the current bone " "pose to extract the twist when [method is_twist_from_rest] is [code]false[/" "code].\n" "In other words, by calling [method set_twist_from] by [signal " "SkeletonModifier3D.modification_processed] of a specific " "[SkeletonModifier3D], you can extract only the twists generated by modifiers " "processed after that but before this [BoneTwistDisperser3D]." msgstr "" "Establece la rotación a un estado arbitrario antes de girar para la pose ósea " "actual para extraer el giro cuando [method is_twist_from_rest] es " "[code]false[/code].\n" "En otras palabras, al llamar a [method set_twist_from] por [signal " "SkeletonModifier3D.modification_processed] de un [SkeletonModifier3D] " "específico, puede extraer solo los giros generados por los modificadores " "procesados después de eso pero antes de este [BoneTwistDisperser3D]." msgid "" "If [param enabled] is [code]true[/code], it extracts the twist amount from " "the difference between the bone rest and the current bone pose.\n" "If [param enabled] is [code]false[/code], it extracts the twist amount from " "the difference between [method get_twist_from] and the current bone pose. See " "also [method set_twist_from]." msgstr "" "Si [param enabled] es [code]true[/code], extrae la cantidad de torsión de la " "diferencia entre el reposo del hueso y la pose actual del hueso.\n" "Si [param enabled] es [code]false[/code], extrae la cantidad de torsión de la " "diferencia entre [method get_twist_from] y la pose actual del hueso. Véase " "también [method set_twist_from]." msgid "" "Sets the position at which to divide the segment between joints for weight " "assignment when [method get_disperse_mode] is [constant " "DISPERSE_MODE_WEIGHTED].\n" "For example, when [param weight_position] is [code]0.5[/code], if two bone " "segments with a length of [code]1.0[/code] exist between three joints, " "weights are assigned to each joint from root to end at ratios of [code]0.5[/" "code], [code]1.0[/code], and [code]0.5[/code]. Then amounts become " "[code]0.25[/code], [code]0.75[/code], and [code]1.0[/code] respectively." msgstr "" "Establece la posición en la que se divide el segmento entre las " "articulaciones para la asignación de peso cuando [method get_disperse_mode] " "es [constant DISPERSE_MODE_WEIGHTED].\n" "Por ejemplo, cuando [param weight_position] es [code]0.5[/code], si existen " "dos segmentos óseos con una longitud de [code]1.0[/code] entre tres " "articulaciones, se asignan pesos a cada articulación desde la raíz hasta el " "extremo en proporciones de [code]0.5[/code], [code]1.0[/code] y [code]0.5[/" "code]. Entonces, las cantidades se convierten en [code]0.25[/code], " "[code]0.75[/code] y [code]1.0[/code] respectivamente." msgid "The number of settings." msgstr "El número de configuraciones." msgid "" "Assign amounts so that they monotonically increase from [code]0.0[/code] to " "[code]1.0[/code], ensuring all weights are equal. For example, with five " "joints, the amounts would be [code]0.2[/code], [code]0.4[/code], [code]0.6[/" "code], [code]0.8[/code], and [code]1.0[/code] starting from the root bone." msgstr "" "Asigne cantidades de manera que aumenten monótonamente de [code]0.0[/code] a " "[code]1.0[/code], asegurando que todos los pesos sean iguales. Por ejemplo, " "con cinco articulaciones, las cantidades serían [code]0.2[/code], [code]0.4[/" "code], [code]0.6[/code], [code]0.8[/code] y [code]1.0[/code] comenzando desde " "el hueso raíz." msgid "" "Assign amounts so that they monotonically increase from [code]0.0[/code] to " "[code]1.0[/code], based on the length of the bones between joint segments. " "See also [method set_weight_position]." msgstr "" "Asigne cantidades de modo que aumenten monótonamente de [code]0.0[/code] a " "[code]1.0[/code], en función de la longitud de los huesos entre los segmentos " "articulares. Véase también [method set_weight_position]." msgid "" "You can assign arbitrary amounts to the joint list. See also [method " "set_joint_twist_amount].\n" "When [method is_end_bone_extended] is [code]false[/code], a child of the " "reference bone exists solely to determine the twist axis, so its custom " "amount has absolutely no effect at all." msgstr "" "Puedes asignar cantidades arbitrarias a la lista de articulaciones. Véase " "también [method set_joint_twist_amount].\n" "Cuando [method is_end_bone_extended] es [code]false[/code], un hijo del hueso " "de referencia existe únicamente para determinar el eje de torsión, por lo que " "su cantidad personalizada no tiene absolutamente ningún efecto." msgid "A built-in boolean type." msgstr "Un tipo booleano incorporado." msgid "" "The [bool] is a built-in [Variant] type that may only store one of two " "values: [code]true[/code] or [code]false[/code]. You can imagine it as a " "switch that can be either turned on or off, or as a binary digit that can " "either be 1 or 0.\n" "Booleans can be directly used in [code]if[/code], and other conditional " "statements:\n" "[codeblocks]\n" "[gdscript]\n" "var can_shoot = true\n" "if can_shoot:\n" "\tlaunch_bullet()\n" "[/gdscript]\n" "[csharp]\n" "bool canShoot = true;\n" "if (canShoot)\n" "{\n" "\tLaunchBullet();\n" "}\n" "[/csharp]\n" "[/codeblocks]\n" "All comparison operators return booleans ([code]==[/code], [code]>[/code], " "[code]<=[/code], etc.). As such, it is not necessary to compare booleans " "themselves. You do not need to add [code]== true[/code] or [code]== false[/" "code].\n" "Booleans can be combined with the logical operators [code]and[/code], " "[code]or[/code], [code]not[/code] to create complex conditions:\n" "[codeblocks]\n" "[gdscript]\n" "if bullets > 0 and not is_reloading():\n" "\tlaunch_bullet()\n" "\n" "if bullets == 0 or is_reloading():\n" "\tplay_clack_sound()\n" "[/gdscript]\n" "[csharp]\n" "if (bullets > 0 && !IsReloading())\n" "{\n" "\tLaunchBullet();\n" "}\n" "\n" "if (bullets == 0 || IsReloading())\n" "{\n" "\tPlayClackSound();\n" "}\n" "[/csharp]\n" "[/codeblocks]\n" "[b]Note:[/b] In modern programming languages, logical operators are evaluated " "in order. All remaining conditions are skipped if their result would have no " "effect on the final value. This concept is known as [url=https://" "en.wikipedia.org/wiki/Short-circuit_evaluation]short-circuit evaluation[/url] " "and can be useful to avoid evaluating expensive conditions in some " "performance-critical cases.\n" "[b]Note:[/b] By convention, built-in methods and properties that return " "booleans are usually defined as yes-no questions, single adjectives, or " "similar ([method String.is_empty], [method Node.can_process], [member " "Camera2D.enabled], etc.)." msgstr "" "El [bool] es un tipo [Variant] integrado que solo puede almacenar uno de dos " "valores: [code]true[/code] o [code]false[/code]. Puede imaginarlo como un " "interruptor que puede estar encendido o apagado, o como un dígito binario que " "puede ser 1 o 0.\n" "Los booleanos pueden utilizarse directamente en [code]if[/code] y otras " "sentencias condicionales:\n" "[codeblocks]\n" "[gdscript]\n" "var can_shoot = true\n" "if can_shoot:\n" "\tlaunch_bullet()\n" "[/gdscript]\n" "[csharp]\n" "bool canShoot = true;\n" "if (canShoot)\n" "{\n" "\tLaunchBullet();\n" "}\n" "[/csharp]\n" "[/codeblocks]\n" "Todos los operadores de comparación devuelven booleanos ([code]==[/code], " "[code]>[/code], [code]<=[/code], etc.). Como tal, no es necesario comparar " "los booleanos entre sí. No es necesario añadir [code]== true[/code] o " "[code]== false[/code].\n" "Los booleanos pueden combinarse con los operadores lógicos [code]and[/code], " "[code]or[/code], [code]not[/code] para crear condiciones complejas:\n" "[codeblocks]\n" "[gdscript]\n" "if bullets > 0 and not is_reloading():\n" "\tlaunch_bullet()\n" "\n" "if bullets == 0 or is_reloading():\n" "\tplay_clack_sound()\n" "[/gdscript]\n" "[csharp]\n" "if (bullets > 0 && !IsReloading())\n" "{\n" "\tLaunchBullet();\n" "}\n" "\n" "if (bullets == 0 || IsReloading())\n" "{\n" "\tPlayClackSound();\n" "}\n" "[/csharp]\n" "[/codeblocks]\n" "[b]Nota:[/b] En los lenguajes de programación modernos, los operadores " "lógicos se evalúan en orden. Todas las condiciones restantes se omiten si su " "resultado no tuviera efecto en el valor final. Este concepto se conoce como " "[url=https://es.wikipedia.org/wiki/" "Evaluaci%C3%B3n_de_cortocircuito]evaluación de cortocircuito[/url] y puede " "ser útil para evitar la evaluación de condiciones costosas en algunos casos " "críticos para el rendimiento.\n" "[b]Nota:[/b] Por convención, los métodos y propiedades integrados que " "devuelven booleanos suelen definirse como preguntas de sí o no, adjetivos " "simples o similares ([method String.is_empty], [method Node.can_process], " "[member Camera2D.enabled], etc.)." msgid "Constructs a [bool] set to [code]false[/code]." msgstr "Construye un [bool] establecido en [code]false[/code]." msgid "Constructs a [bool] as a copy of the given [bool]." msgstr "Construye un [bool] como una copia del [bool] dado." msgid "A container that arranges its child controls horizontally or vertically." msgstr "" "Un contenedor que organiza sus controles secundarios horizontal o " "verticalmente." msgid "" "A container that arranges its child controls horizontally or vertically, " "rearranging them automatically when their minimum size changes." msgstr "" "Un contenedor que organiza sus controles hijos horizontal o verticalmente, " "reorganizándolos automáticamente cuando cambia su tamaño mínimo." msgid "" "Adds a [Control] node to the box as a spacer. If [param begin] is [code]true[/" "code], it will insert the [Control] node in front of all other children." msgstr "" "Añade un nodo [Control] al cuadro como un espaciador. Si [param begin] es " "[code]true[/code], insertará el nodo [Control] delante de todos los demás " "hijos." msgid "" "The alignment of the container's children (must be one of [constant " "ALIGNMENT_BEGIN], [constant ALIGNMENT_CENTER], or [constant ALIGNMENT_END])." msgstr "" "La alineación de los hijos del contenedor (debe ser uno de [constant " "ALIGNMENT_BEGIN], [constant ALIGNMENT_CENTER], o [constant ALIGNMENT_END])." msgid "" "If [code]true[/code], the [BoxContainer] will arrange its children " "vertically, rather than horizontally.\n" "Can't be changed when using [HBoxContainer] and [VBoxContainer]." msgstr "" "Si es [code]true[/code], el [BoxContainer] organizará sus hijos " "verticalmente, en lugar de horizontalmente.\n" "No se puede cambiar cuando se usan [HBoxContainer] y [VBoxContainer]." msgid "" "The child controls will be arranged at the beginning of the container, i.e. " "top if orientation is vertical, left if orientation is horizontal (right for " "RTL layout)." msgstr "" "Los controles secundarios se organizarán al principio del contenedor, es " "decir, en la parte superior si la orientación es vertical, a la izquierda si " "la orientación es horizontal (a la derecha para el diseño RTL)." msgid "The child controls will be centered in the container." msgstr "Los controles hijos se centrarán en el contenedor." msgid "" "The child controls will be arranged at the end of the container, i.e. bottom " "if orientation is vertical, right if orientation is horizontal (left for RTL " "layout)." msgstr "" "Los controles secundarios se organizarán al final del contenedor, es decir, " "en la parte inferior si la orientación es vertical, a la derecha si la " "orientación es horizontal (a la izquierda para el diseño RTL)." msgid "The space between the [BoxContainer]'s elements, in pixels." msgstr "El espacio entre los elementos del [BoxContainer], en píxeles." msgid "Generate an axis-aligned box [PrimitiveMesh]." msgstr "Genera una caja alineada con los ejes [PrimitiveMesh]." msgid "" "Generate an axis-aligned box [PrimitiveMesh].\n" "The box's UV layout is arranged in a 3×2 layout that allows texturing each " "face individually. To apply the same texture on all faces, change the " "material's UV property to [code]Vector3(3, 2, 1)[/code]. This is equivalent " "to adding [code]UV *= vec2(3.0, 2.0)[/code] in a vertex shader.\n" "[b]Note:[/b] When using a large textured [BoxMesh] (e.g. as a floor), you may " "stumble upon UV jittering issues depending on the camera angle. To solve " "this, increase [member subdivide_depth], [member subdivide_height] and " "[member subdivide_width] until you no longer notice UV jittering." msgstr "" "Genera un [PrimitiveMesh] de caja alineado a los ejes.\n" "El diseño UV de la caja está organizado en un diseño de 3×2 que permite " "texturizar cada cara individualmente. Para aplicar la misma textura en todas " "las caras, cambia la propiedad UV del material a [code]Vector3(3, 2, 1)[/" "code]. Esto es equivalente a añadir [code]UV *= vec2(3.0, 2.0)[/code] en un " "shader de vértices.\n" "[b]Nota:[/b] Al usar una [BoxMesh] texturizada grande (por ejemplo, como " "suelo), puedes encontrarte con problemas de parpadeo UV dependiendo del " "ángulo de la cámara. Para solucionarlo, aumenta [member subdivide_depth], " "[member subdivide_height] y [member subdivide_width] hasta que ya no notes el " "parpadeo UV." msgid "The box's width, height and depth." msgstr "El ancho, la altura y la profundidad de la caja." msgid "Number of extra edge loops inserted along the Z axis." msgstr "Número de bucles de borde extra insertados a lo largo del eje Z." msgid "Number of extra edge loops inserted along the Y axis." msgstr "Número de bucles de borde extra insertados a lo largo del eje Y." msgid "Number of extra edge loops inserted along the X axis." msgstr "Número de bucles de borde extra insertados a lo largo del eje X." msgid "The box's size in 3D units." msgstr "El tamaño de la caja en unidades 3D." msgid "A 3D box shape used for physics collision." msgstr "Una forma de caja 3D utilizada para la colisión física." msgid "" "A 3D box shape, intended for use in physics. Usually used to provide a shape " "for a [CollisionShape3D].\n" "[b]Performance:[/b] [BoxShape3D] is fast to check collisions against. It is " "faster than [CapsuleShape3D] and [CylinderShape3D], but slower than " "[SphereShape3D]." msgstr "" "Una forma de caja 3D, pensada para su uso en la física. Normalmente se usa " "para dar forma a un [CollisionShape3D].\n" "[b]Rendimiento:[/b] [BoxShape3D] es rápido para comprobar colisiones. Es más " "rápido que [CapsuleShape3D] y [CylinderShape3D], pero más lento que " "[SphereShape3D]." msgid "3D Kinematic Character Demo" msgstr "Demo de Personaje Cinemático en 3D" msgid "A themed button that can contain text and an icon." msgstr "Un botón temático que puede contener texto y un icono." msgid "Operating System Testing Demo" msgstr "Demo de Prueba de Sistema Operativo" msgid "Text alignment policy for the button's text." msgstr "Política de alineación del texto del botón." msgid "" "If set to something other than [constant TextServer.AUTOWRAP_OFF], the text " "gets wrapped inside the node's bounding rectangle." msgstr "" "Si se establece en un valor distinto de [constant TextServer.AUTOWRAP_OFF], " "el texto se ajusta dentro del rectángulo delimitador del nodo." msgid "" "Autowrap space trimming flags. See [constant " "TextServer.BREAK_TRIM_START_EDGE_SPACES] and [constant " "TextServer.BREAK_TRIM_END_EDGE_SPACES] for more info." msgstr "" "Flags de recorte de espacio de ajuste automático. Véase [constant " "TextServer.BREAK_TRIM_START_EDGE_SPACES] y [constant " "TextServer.BREAK_TRIM_END_EDGE_SPACES] para más información." msgid "" "If [code]true[/code], text that is too large to fit the button is clipped " "horizontally. If [code]false[/code], the button will always be wide enough to " "hold the text. The text is not vertically clipped, and the button's height is " "not affected by this property." msgstr "" "Si es [code]true[/code], el texto que es demasiado grande para caber en el " "botón se recorta horizontalmente. Si es [code]false[/code], el botón siempre " "será lo suficientemente ancho como para contener el texto. El texto no se " "recorta verticalmente, y la altura del botón no se ve afectada por esta " "propiedad." msgid "" "When enabled, the button's icon will expand/shrink to fit the button's size " "while keeping its aspect. See also [theme_item icon_max_width]." msgstr "" "Cuando está activado, el icono del botón se expandirá o encogerá para " "adaptarse al tamaño del botón, manteniendo su aspecto. Véase también " "[theme_item icon_max_width]." msgid "Flat buttons don't display decoration." msgstr "Los botones planos no muestran decoración." msgid "" "Button's icon, if text is present the icon will be placed before the text.\n" "To edit margin and spacing of the icon, use [theme_item h_separation] theme " "property and [code]content_margin_*[/code] properties of the used " "[StyleBox]es." msgstr "" "Icono del botón, si hay texto presente, el icono se colocará antes del " "texto.\n" "Para editar el margen y el espaciado del icono, usa la propiedad del tema " "[theme_item h_separation] y las propiedades [code]content_margin_*[/code] de " "los [StyleBox] usados." msgid "" "Specifies if the icon should be aligned horizontally to the left, right, or " "center of a button. Uses the same [enum HorizontalAlignment] constants as the " "text alignment. If centered horizontally and vertically, text will draw on " "top of the icon." msgstr "" "Especifica si el icono debe estar alineado horizontalmente a la izquierda, a " "la derecha o al centro de un botón. Utiliza las mismas constantes de [enum " "HorizontalAlignment] que la alineación del texto. Si está centrado horizontal " "y verticalmente, el texto se dibujará encima del icono." msgid "The button's text that will be displayed inside the button's area." msgstr "El texto del botón que se mostrará dentro del área del botón." msgid "Base text writing direction." msgstr "Dirección base de escritura del texto." msgid "" "Specifies if the icon should be aligned vertically to the top, bottom, or " "center of a button. Uses the same [enum VerticalAlignment] constants as the " "text alignment. If centered horizontally and vertically, text will draw on " "top of the icon." msgstr "" "Especifica si el icono debe alinearse verticalmente a la parte superior, " "inferior o al centro de un botón. Utiliza las mismas constantes de [enum " "VerticalAlignment] que la alineación del texto. Si está centrado horizontal y " "verticalmente, el texto se dibujará encima del icono." msgid "Default text [Color] of the [Button]." msgstr "[Color] del texto predeterminado del [Button]." msgid "Text [Color] used when the [Button] is disabled." msgstr "[Color] del texto utilizado cuando el [Button] está desactivado." msgid "" "Text [Color] used when the [Button] is focused. Only replaces the normal text " "color of the button. Disabled, hovered, and pressed states take precedence " "over this color." msgstr "" "El [Color] del texto que se usa cuando el [Button] está enfocado. Solo " "reemplaza el color normal del texto del botón. Los estados desactivado, " "flotante y presionado tienen prioridad sobre este color." msgid "Text [Color] used when the [Button] is being hovered." msgstr "[Color] del texto usado cuando el [Button] tiene encima el cursor." msgid "Text [Color] used when the [Button] is being hovered and pressed." msgstr "" "[Color] del texto utilizado cuando se está pasando el ratón y pulsando el " "[Button]." msgid "The tint of text outline of the [Button]." msgstr "El tinte del contorno del texto del [Button]." msgid "Text [Color] used when the [Button] is being pressed." msgstr "[Color] del texto utilizado cuando se pulsa el [Button]." msgid "Icon modulate [Color] used when the [Button] is disabled." msgstr "" "[Color] de modulación del icono que se usa cuando el [Button] está " "desactivado." msgid "" "Icon modulate [Color] used when the [Button] is focused. Only replaces the " "normal modulate color of the button. Disabled, hovered, and pressed states " "take precedence over this color." msgstr "" "[Color] de modulación del icono que se usa cuando el [Button] está enfocado. " "Solo reemplaza el color de modulación normal del botón. Los estados " "desactivado, flotante y presionado tienen prioridad sobre este color." msgid "Icon modulate [Color] used when the [Button] is being hovered." msgstr "" "[Color] de modulación del icono que se usa cuando se está pasando el ratón " "por encima del [Button]." msgid "" "Icon modulate [Color] used when the [Button] is being hovered and pressed." msgstr "" "[Color] de modulación del icono que se usa cuando se está pasando el ratón " "por encima del [Button] y se está pulsando." msgid "Default icon modulate [Color] of the [Button]." msgstr "[Color] de modulación del icono predeterminado del [Button]." msgid "Icon modulate [Color] used when the [Button] is being pressed." msgstr "" "[Color] de modulación del icono usado cuando se está pulsando el [Button]." msgid "" "The horizontal space between [Button]'s icon and text. Negative values will " "be treated as [code]0[/code] when used." msgstr "" "El espacio horizontal entre el icono y el texto del [Button]. Los valores " "negativos se tratarán como [code]0[/code] cuando se utilicen." msgid "" "The maximum allowed width of the [Button]'s icon. This limit is applied on " "top of the default size of the icon, or its expanded size if [member " "expand_icon] is [code]true[/code]. The height is adjusted according to the " "icon's ratio. If the button has additional icons (e.g. [CheckBox]), they will " "also be limited." msgstr "" "El ancho máximo permitido para el icono del [Button]. Este límite se aplica " "sobre el tamaño predeterminado del icono, o sobre su tamaño expandido si " "[member expand_icon] es [code]true[/code]. La altura se ajusta según la " "relación de aspecto (ratio) del icono. Si el botón tiene iconos adicionales " "(por ejemplo, [CheckBox]), estos también se verán limitados." msgid "" "Additional vertical spacing between lines (in pixels), spacing is added to " "line descent. This value can be negative." msgstr "" "Espacio vertical adicional entre líneas (en píxeles); el espacio se añade al " "descenso de la línea (line descent). Este valor puede ser negativo." msgid "" "The size of the text outline.\n" "[b]Note:[/b] If using a font with [member " "FontFile.multichannel_signed_distance_field] enabled, its [member " "FontFile.msdf_pixel_range] must be set to at least [i]twice[/i] the value of " "[theme_item outline_size] for outline rendering to look correct. Otherwise, " "the outline may appear to be cut off earlier than intended." msgstr "" "El tamaño del contorno del texto.\n" "[b]Note:[/b] Si se usa una fuente con [member " "FontFile.multichannel_signed_distance_field] habilitado, su [member " "FontFile.msdf_pixel_range] debe establecerse en al menos [i]el doble[/i] del " "valor de [theme_item outline_size] para que el renderizado del contorno se " "vea correctamente. De lo contrario, el contorno puede parecer cortado antes " "de lo previsto." msgid "[Font] of the [Button]'s text." msgstr "[Font] del texto del [Button]." msgid "Font size of the [Button]'s text." msgstr "Tamaño de fuente del texto del [Button]." msgid "" "Default icon for the [Button]. Appears only if [member icon] is not assigned." msgstr "" "Icono predeterminado para el [Button]. Aparece solo si [member icon] no está " "asignado." msgid "[StyleBox] used when the [Button] is disabled." msgstr "[StyleBox] usado cuando el [Button] está desactivado." msgid "" "[StyleBox] used when the [Button] is disabled (for right-to-left layouts)." msgstr "" "[StyleBox] usado cuando el [Button] está desactivado (para diseños de derecha " "a izquierda)." msgid "" "[StyleBox] used when the [Button] is focused. The [theme_item focus] " "[StyleBox] is displayed [i]over[/i] the base [StyleBox], so a partially " "transparent [StyleBox] should be used to ensure the base [StyleBox] remains " "visible. A [StyleBox] that represents an outline or an underline works well " "for this purpose. To disable the focus visual effect, assign a " "[StyleBoxEmpty] resource. Note that disabling the focus visual effect will " "harm keyboard/controller navigation usability, so this is not recommended for " "accessibility reasons." msgstr "" "[StyleBox] usado cuando el [Button] está enfocado. El [StyleBox] [theme_item " "focus] se muestra [i]sobre[/i] el [StyleBox] base, por lo que se debe usar un " "[StyleBox] parcialmente transparente para asegurar que el [StyleBox] base " "permanezca visible. Un [StyleBox] que represente un contorno o un subrayado " "funciona bien para este propósito. Para desactivar el efecto visual de " "enfoque, asigna un recurso [StyleBoxEmpty]. Ten en cuenta que desactivar el " "efecto visual de enfoque perjudicará la usabilidad de la navegación con " "teclado/mando, por lo que no se recomienda por razones de accesibilidad." msgid "[StyleBox] used when the [Button] is being hovered." msgstr "[StyleBox] que se usa cuando el [Button] tiene encima el cursor." msgid "" "[StyleBox] used when the [Button] is being hovered (for right-to-left " "layouts)." msgstr "" "[StyleBox] utilizado cuando el puntero está sobre el [Button] (para diseños " "de derecha a izquierda)." msgid "" "[StyleBox] used when the [Button] is being pressed and hovered at the same " "time." msgstr "" "[StyleBox] utilizado cuando se está pulsando el [Button] y el puntero está " "encima a la vez." msgid "" "[StyleBox] used when the [Button] is being pressed and hovered at the same " "time (for right-to-left layouts)." msgstr "" "[StyleBox] utilizado cuando se está pulsando el [Button] y el puntero está " "encima a la vez (para diseños de derecha a izquierda)." msgid "Default [StyleBox] for the [Button]." msgstr "[StyleBox] por defecto para el [Button]." msgid "Default [StyleBox] for the [Button] (for right-to-left layouts)." msgstr "" "El [StyleBox] predeterminado para el [Button] (para diseños de derecha a " "izquierda)." msgid "[StyleBox] used when the [Button] is being pressed." msgstr "[StyleBox] que se usa cuando se presiona el [Button]." msgid "" "A group of buttons that doesn't allow more than one button to be pressed at a " "time." msgstr "" "Un grupo de botones que no permite que se pulse más de un botón a la vez." msgid "" "A group of [BaseButton]-derived buttons. The buttons in a [ButtonGroup] are " "treated like radio buttons: No more than one button can be pressed at a time. " "Some types of buttons (such as [CheckBox]) may have a special appearance in " "this state.\n" "Every member of a [ButtonGroup] should have [member BaseButton.toggle_mode] " "set to [code]true[/code]." msgstr "" "Un grupo de botones derivados de [BaseButton]. Los botones de un " "[ButtonGroup] se tratan como botones de radio: No se puede presionar más de " "un botón a la vez. Algunos tipos de botones (como [CheckBox]) pueden tener " "una apariencia especial en este estado.\n" "Cada miembro de un [ButtonGroup] debería tener [member " "BaseButton.toggle_mode] establecido en [code]true[/code]." msgid "" "Returns an [Array] of [Button]s who have this as their [ButtonGroup] (see " "[member BaseButton.button_group])." msgstr "" "Devuelve un [Array] de [Button]s que tienen esto como su [ButtonGroup] (véase " "[member BaseButton.button_group])." msgid "Returns the current pressed button." msgstr "Devuelve el botón pulsado." msgid "" "If [code]true[/code], it is possible to unpress all buttons in this " "[ButtonGroup]." msgstr "" "Si es [code]true[/code], es posible deseleccionar todos los botones de este " "[ButtonGroup]." msgid "Emitted when one of the buttons of the group is pressed." msgstr "Emitida cuando se presiona uno de los botones del grupo." msgid "A built-in type representing a method or a standalone function." msgstr "" "Un tipo incorporado que representa un método o una función independiente." msgid "Constructs an empty [Callable], with no object nor method bound." msgstr "Construye un [Callable] vacío, sin ningún objeto ni método vinculado." msgid "Constructs a [Callable] as a copy of the given [Callable]." msgstr "Construye un [Callable] como una copia del [Callable] dado." msgid "" "Creates a new [Callable] for the method named [param method] in the specified " "[param object].\n" "[b]Note:[/b] For methods of built-in [Variant] types, use [method create] " "instead." msgstr "" "Crea un nuevo [Callable] para el método llamado [param method] en el [param " "object] especificado.\n" "[b]Nota:[/b] Para métodos de tipos [Variant] incorporados, usa [method " "create] en su lugar." msgid "" "Returns a copy of this [Callable] with one or more arguments bound. When " "called, the bound arguments are passed [i]after[/i] the arguments supplied by " "[method call]. See also [method unbind].\n" "[b]Note:[/b] When this method is chained with other similar methods, the " "order in which the argument list is modified is read from right to left." msgstr "" "Devuelve una copia de este [Callable] con uno o más argumentos vinculados. " "Cuando se llama, los argumentos vinculados se pasan [i]después[/i] de los " "argumentos proporcionados por [method call]. Véase también [method unbind].\n" "[b]Nota:[/b] Cuando este método se encadena con otros métodos similares, el " "orden en que se modifica la lista de argumentos se lee de derecha a izquierda." msgid "" "Returns a copy of this [Callable] with one or more arguments bound, reading " "them from an array. When called, the bound arguments are passed [i]after[/i] " "the arguments supplied by [method call]. See also [method unbind].\n" "[b]Note:[/b] When this method is chained with other similar methods, the " "order in which the argument list is modified is read from right to left." msgstr "" "Devuelve una copia de este [Callable] con uno o más argumentos vinculados, " "leyéndolos desde un array. Cuando se llama, los argumentos vinculados se " "pasan [i]después[/i] de los argumentos proporcionados por [method call]. " "Véase también [method unbind].\n" "[b]Nota:[/b] Cuando este método se encadena con otros métodos similares, el " "orden en que se modifica la lista de argumentos se lee de derecha a izquierda." msgid "" "Calls the method represented by this [Callable]. Arguments can be passed and " "should match the method's signature." msgstr "" "Llama al método representado por este [Callable]. Se pueden pasar argumentos " "y deben coincidir con la firma del método." msgid "" "Calls the method represented by this [Callable] in deferred mode, i.e. at the " "end of the current frame. Arguments can be passed and should match the " "method's signature.\n" "[codeblocks]\n" "[gdscript]\n" "func _ready():\n" "\tgrab_focus.call_deferred()\n" "[/gdscript]\n" "[csharp]\n" "public override void _Ready()\n" "{\n" "\tCallable.From(GrabFocus).CallDeferred();\n" "}\n" "[/csharp]\n" "[/codeblocks]\n" "[b]Note:[/b] Deferred calls are processed at idle time. Idle time happens " "mainly at the end of process and physics frames. In it, deferred calls will " "be run until there are none left, which means you can defer calls from other " "deferred calls and they'll still be run in the current idle time cycle. This " "means you should not call a method deferred from itself (or from a method " "called by it), as this causes infinite recursion the same way as if you had " "called the method directly.\n" "See also [method Object.call_deferred]." msgstr "" "Llama al método representado por este [Callable] en modo diferido, es decir, " "al final del frame actual. Se pueden pasar argumentos, los cuales deben " "coincidir con la firma del método.\n" "[codeblocks]\n" "[gdscript]\n" "func _ready():\n" "\tgrab_focus.call_deferred()\n" "[/gdscript]\n" "[csharp]\n" "public override void _Ready()\n" "{\n" "\tCallable.From(GrabFocus).CallDeferred();\n" "}\n" "[/csharp]\n" "[/codeblocks]\n" "[b]Nota:[/b] Las llamadas diferidas se procesan en tiempo de inactividad " "(idle time). El tiempo de inactividad ocurre principalmente al final de los " "frames de proceso y de física. En él, las llamadas diferidas se ejecutarán " "hasta que no quede ninguna, lo que significa que puedes diferir llamadas " "desde otras llamadas diferidas y aun así se ejecutarán en el ciclo de tiempo " "de inactividad actual. Esto significa que no debes llamar a un método de " "forma diferida desde sí mismo (o desde un método llamado por este), ya que " "esto provoca una recursión infinita de la misma manera que si hubieras " "llamado al método directamente.\n" "Consulta también [method Object.call_deferred]." msgid "" "Calls the method represented by this [Callable]. Unlike [method call], this " "method expects all arguments to be contained inside the [param arguments] " "[Array]." msgstr "" "Llama al método representado por este [Callable]. A diferencia de [method " "call], este método espera que todos los argumentos estén contenidos dentro " "del [param arguments] [Array]." msgid "" "Creates a new [Callable] for the method named [param method] in the specified " "[param variant]. To represent a method of a built-in [Variant] type, a custom " "callable is used (see [method is_custom]). If [param variant] is [Object], " "then a standard callable will be created instead.\n" "[b]Note:[/b] This method is always necessary for the [Dictionary] type, as " "property syntax is used to access its entries. You may also use this method " "when [param variant]'s type is not known in advance (for polymorphism)." msgstr "" "Crea un nuevo [Callable] para el método llamado [param method] en el [param " "variant] especificado. Para representar un método de un tipo [Variant] " "incorporado, se utiliza un objeto invocable personalizado (véase [method " "is_custom]). Si [param variant] es [Object], se creará un objeto invocable " "estándar en su lugar.\n" "[b]Nota:[/b] Este método es siempre necesario para el tipo [Dictionary], ya " "que la sintaxis de propiedad se utiliza para acceder a sus entradas. También " "puedes utilizar este método cuando el tipo de [param variant] no se conoce de " "antemano (para el polimorfismo)." msgid "" "Returns the total number of arguments this [Callable] should take, including " "optional arguments. This means that any arguments bound with [method bind] " "are [i]subtracted[/i] from the result, and any arguments unbound with [method " "unbind] are [i]added[/i] to the result." msgstr "" "Devuelve el número total de argumentos que debe tomar este [Callable], " "incluidos los argumentos opcionales. Esto significa que cualquier argumento " "vinculado con [method bind] se [i]resta[/i] del resultado, y cualquier " "argumento desvinculado con [method unbind] se [i]suma[/i] al resultado." msgid "" "Returns the array of arguments bound via successive [method bind] or [method " "unbind] calls. These arguments will be added [i]after[/i] the arguments " "passed to the call, from which [method get_unbound_arguments_count] arguments " "on the right have been previously excluded.\n" "[codeblock]\n" "func get_effective_arguments(callable, call_args):\n" "\tassert(call_args.size() - callable.get_unbound_arguments_count() >= 0)\n" "\tvar result = call_args.slice(0, call_args.size() - " "callable.get_unbound_arguments_count())\n" "\tresult.append_array(callable.get_bound_arguments())\n" "\treturn result\n" "[/codeblock]" msgstr "" "Devuelve el array de argumentos vinculados mediante llamadas sucesivas a " "[method bind] o [method unbind]. Estos argumentos se añadirán [i]después[/i] " "de los argumentos pasados a la llamada, de los cuales se habrán excluido " "previamente [method get_unbound_arguments_count] argumentos a la derecha.\n" "[codeblock]\n" "func get_effective_arguments(callable, call_args):\n" "\tassert(call_args.size() - callable.get_unbound_arguments_count() >= 0)\n" "\tvar result = call_args.slice(0, call_args.size() - " "callable.get_unbound_arguments_count())\n" "\tresult.append_array(callable.get_bound_arguments())\n" "\treturn result\n" "[/codeblock]" msgid "" "Returns the total amount of arguments bound via successive [method bind] or " "[method unbind] calls. This is the same as the size of the array returned by " "[method get_bound_arguments]. See [method get_bound_arguments] for details.\n" "[b]Note:[/b] The [method get_bound_arguments_count] and [method " "get_unbound_arguments_count] methods can both return positive values." msgstr "" "Devuelve la cantidad total de argumentos vinculados a través de sucesivas " "llamadas a [method bind] o [method unbind]. Esto es lo mismo que el tamaño " "del array devuelto por [method get_bound_arguments]. Véase [method " "get_bound_arguments] para más detalles.\n" "[b]Nota:[/b] Los métodos [method get_bound_arguments_count] y [method " "get_unbound_arguments_count] pueden devolver valores positivos." msgid "" "Returns the name of the method represented by this [Callable]. If the " "callable is a GDScript lambda function, returns the function's name or [code]" "\"\"[/code]." msgstr "" "Devuelve el nombre del método representado por este [Callable]. Si el objeto " "invocable es una función lambda de GDScript, devuelve el nombre de la función " "o [code]\"\"[/code]." msgid "Returns the object on which this [Callable] is called." msgstr "Devuelve el objeto en el que se llama a este [Callable]." msgid "" "Returns the ID of this [Callable]'s object (see [method " "Object.get_instance_id])." msgstr "" "Devuelve el ID del objeto de este [Callable] (véase [method " "Object.get_instance_id])." msgid "" "Returns the total amount of arguments unbound via successive [method bind] or " "[method unbind] calls. See [method get_bound_arguments] for details.\n" "[b]Note:[/b] The [method get_bound_arguments_count] and [method " "get_unbound_arguments_count] methods can both return positive values." msgstr "" "Devuelve la cantidad total de argumentos desvinculados a través de sucesivas " "llamadas a [method bind] o [method unbind]. Véase [method " "get_bound_arguments] para más detalles.\n" "[b]Nota:[/b] Los métodos [method get_bound_arguments_count] y [method " "get_unbound_arguments_count] pueden devolver valores positivos." msgid "" "Returns the 32-bit hash value of this [Callable]'s object.\n" "[b]Note:[/b] [Callable]s with equal content will always produce identical " "hash values. However, the reverse is not true. Returning identical hash " "values does [i]not[/i] imply the callables are equal, because different " "callables can have identical hash values due to hash collisions. The engine " "uses a 32-bit hash algorithm for [method hash]." msgstr "" "Devuelve el valor hash de 32 bits del objeto de este [Callable].\n" "[b]Nota:[/b] Los [Callable]s con contenido igual siempre producirán valores " "hash idénticos. Sin embargo, lo contrario no es cierto. Devolver valores hash " "idénticos [i]no[/i] implica que los invocables sean iguales, porque " "diferentes invocables pueden tener valores hash idénticos debido a colisiones " "de hash. El motor utiliza un algoritmo hash de 32 bits para [method hash]." msgid "" "Returns [code]true[/code] if this [Callable] is a custom callable. Custom " "callables are used:\n" "- for binding/unbinding arguments (see [method bind] and [method unbind]);\n" "- for representing methods of built-in [Variant] types (see [method " "create]);\n" "- for representing global, lambda, and RPC functions in GDScript;\n" "- for other purposes in the core, GDExtension, and C#." msgstr "" "Devuelve [code]true[/code] si este [Callable] es un objeto invocable " "personalizado. Los objetos invocables personalizados se utilizan:\n" "- para vincular/desvincular argumentos (véase [method bind] y [method " "unbind]);\n" "- para representar métodos de tipos [Variant] incorporados (véase [method " "create]);\n" "- para representar funciones globales, lambda y RPC en GDScript;\n" "- para otros propósitos en el núcleo, GDExtension y C#." msgid "" "Returns [code]true[/code] if this [Callable] has no target to call the method " "on. Equivalent to [code]callable == Callable()[/code].\n" "[b]Note:[/b] This is [i]not[/i] the same as [code]not is_valid()[/code] and " "using [code]not is_null()[/code] will [i]not[/i] guarantee that this callable " "can be called. Use [method is_valid] instead." msgstr "" "Devuelve [code]true[/code] si este [Callable] no tiene un objetivo al que " "llamar al método. Equivalente a [code]callable == Callable()[/code].\n" "[b]Nota:[/b] Esto [i]no[/i] es lo mismo que [code]not is_valid()[/code] y " "usar [code]not is_null()[/code] [i]no[/i] garantiza que se pueda llamar a " "este objeto invocable. Utiliza [method is_valid] en su lugar." msgid "" "Returns [code]true[/code] if this [Callable] is a standard callable. This " "method is the opposite of [method is_custom]. Returns [code]false[/code] if " "this callable is a lambda function." msgstr "" "Devuelve [code]true[/code] si este [Callable] es un objeto invocable " "estándar. Este método es lo opuesto a [method is_custom]. Devuelve " "[code]false[/code] si este objeto invocable es una función lambda." msgid "" "Returns [code]true[/code] if the callable's object exists and has a valid " "method name assigned, or is a custom callable." msgstr "" "Devuelve [code]true[/code] si el objeto invocable existe y tiene un nombre de " "método válido asignado, o es un objeto invocable personalizado." msgid "" "Perform an RPC (Remote Procedure Call) on all connected peers. This is used " "for multiplayer and is normally not available, unless the function being " "called has been marked as [i]RPC[/i] (using [annotation @GDScript.@rpc] or " "[method Node.rpc_config]). Calling this method on unsupported functions will " "result in an error. See [method Node.rpc]." msgstr "" "Realiza una RPC (Remote Procedure Call) en todos los pares conectados. Esto " "se utiliza para el multijugador y normalmente no está disponible, a menos que " "la función a la que se llame se haya marcado como [i]RPC[/i] (usando " "[annotation @GDScript.@rpc] o [method Node.rpc_config]). Llamar a este método " "en funciones no soportadas resultará en un error. Véase [method Node.rpc]." msgid "" "Returns a copy of this [Callable] with a number of arguments unbound. In " "other words, when the new callable is called the last few arguments supplied " "by the user are ignored, according to [param argcount]. The remaining " "arguments are passed to the callable. This allows to use the original " "callable in a context that attempts to pass more arguments than this callable " "can handle, e.g. a signal with a fixed number of arguments. See also [method " "bind].\n" "[b]Note:[/b] When this method is chained with other similar methods, the " "order in which the argument list is modified is read from right to left.\n" "[codeblock]\n" "func _ready():\n" "\tfoo.unbind(1).call(1, 2) # Calls foo(1).\n" "\tfoo.bind(3, 4).unbind(1).call(1, 2) # Calls foo(1, 3, 4), note that it does " "not change the arguments from bind.\n" "[/codeblock]" msgstr "" "Devuelve una copia de este [Callable] con un número de argumentos " "desvinculados (unbound). En otras palabras, cuando se llama al nuevo " "callable, se ignoran los últimos argumentos proporcionados por el usuario, " "según [param argcount]. Los argumentos restantes se pasan al callable. Esto " "permite utilizar el callable original en un contexto que intenta pasar más " "argumentos de los que este puede manejar, por ejemplo, una señal con un " "número fijo de argumentos. Consulta también [method bind].\n" "[b]Nota:[/b] Cuando este método se encadena con otros métodos similares, el " "orden en el que se modifica la lista de argumentos se lee de derecha a " "izquierda.\n" "[codeblock]\n" "func _ready():\n" "\tfoo.unbind(1).call(1, 2) # Llama a foo(1).\n" "\tfoo.bind(3, 4).unbind(1).call(1, 2) # Llama a foo(1, 3, 4), ten en cuenta " "que no cambia los argumentos de bind.\n" "[/codeblock]" msgid "Returns [code]true[/code] if both [Callable]s invoke different targets." msgstr "" "Devuelve [code]true[/code] si ambos [Callable] invocan diferentes destinos." msgid "" "Returns [code]true[/code] if both [Callable]s invoke the same custom target." msgstr "" "Devuelve [code]true[/code] si ambos [Callable] invocan el mismo destino " "personalizado." msgid "Calls the specified method after optional delay." msgstr "Llama al método especificado después de un retraso opcional." msgid "" "[CallbackTweener] is used to call a method in a tweening sequence. See " "[method Tween.tween_callback] for more usage information.\n" "The tweener will finish automatically if the callback's target object is " "freed.\n" "[b]Note:[/b] [method Tween.tween_callback] is the only correct way to create " "[CallbackTweener]. Any [CallbackTweener] created manually will not function " "correctly." msgstr "" "[CallbackTweener] se usa para llamar a un método en una secuencia de " "interpolación. Véase [method Tween.tween_callback] para obtener más " "información sobre su uso.\n" "El interpolador finalizará automáticamente si se libera el objeto de destino " "de la llamada.\n" "[b]Nota:[/b] [method Tween.tween_callback] es la única forma correcta de " "crear [CallbackTweener]. Cualquier [CallbackTweener] creado manualmente no " "funcionará correctamente." msgid "" "Makes the callback call delayed by given time in seconds.\n" "[b]Example:[/b] Call [method Node.queue_free] after 2 seconds:\n" "[codeblock]\n" "var tween = get_tree().create_tween()\n" "tween.tween_callback(queue_free).set_delay(2)\n" "[/codeblock]" msgstr "" "Hace que la callback se retrase el tiempo dado en segundos.\n" "[b]Ejemplo:[/b] Llama a [method Node.queue_free] después de 2 segundos:\n" "[codeblock]\n" "var tween = get_tree().create_tween()\n" "tween.tween_callback(queue_free).set_delay(2)\n" "[/codeblock]" msgid "Camera node for 2D scenes." msgstr "Nodo de cámara para escenas 2D." msgid "" "Camera node for 2D scenes. It forces the screen (current layer) to scroll " "following this node. This makes it easier (and faster) to program scrollable " "scenes than manually changing the position of [CanvasItem]-based nodes.\n" "Cameras register themselves in the nearest [Viewport] node (when ascending " "the tree). Only one camera can be active per viewport. If no viewport is " "available ascending the tree, the camera will register in the global " "viewport.\n" "This node is intended to be a simple helper to get things going quickly, but " "more functionality may be desired to change how the camera works. To make " "your own custom camera node, inherit it from [Node2D] and change the " "transform of the canvas by setting [member Viewport.canvas_transform] in " "[Viewport] (you can obtain the current [Viewport] by using [method " "Node.get_viewport]).\n" "Note that the [Camera2D] node's [member Node2D.global_position] doesn't " "represent the actual position of the screen, which may differ due to applied " "smoothing or limits. You can use [method get_screen_center_position] to get " "the real position. Same for the node's [member Node2D.global_rotation] which " "may be different due to applied rotation smoothing. You can use [method " "get_screen_rotation] to get the current rotation of the screen." msgstr "" "Nodo de cámara para escenas 2D. Fuerza a la pantalla (capa actual) a " "desplazarse siguiendo a este nodo. Esto hace que sea más fácil (y rápido) " "programar escenas con desplazamiento que cambiar manualmente la posición de " "los nodos basados en [CanvasItem].\n" "Las cámaras se registran en el nodo [Viewport] más cercano (al ascender por " "el árbol). Solo puede haber una cámara activa por viewport. Si no hay ningún " "viewport disponible al ascender por el árbol, la cámara se registrará en el " "viewport global.\n" "Este nodo está pensado para ser una ayuda simple para empezar rápidamente, " "pero es posible que se desee más funcionalidad para cambiar cómo funciona la " "cámara. Para crear tu propio nodo de cámara personalizado, hereda de [Node2D] " "y cambia la transformación del lienzo estableciendo [member " "Viewport.canvas_transform] en [Viewport] (puedes obtener el [Viewport] actual " "usando [method Node.get_viewport]).\n" "Ten en cuenta que la [member Node2D.global_position] del nodo [Camera2D] no " "representa la posición real de la pantalla, la cual puede diferir debido al " "suavizado o límites aplicados. Puedes usar [method " "get_screen_center_position] para obtener la posición real. Lo mismo ocurre " "con la [member Node2D.global_rotation] del nodo, que puede ser diferente " "debido al suavizado de rotación aplicado. Puedes usar [method " "get_screen_rotation] para obtener la rotación actual de la pantalla." msgid "2D Isometric Demo" msgstr "Demo Isométrica en 2D" msgid "" "Aligns the camera to the tracked node.\n" "[b]Note:[/b] Calling [method force_update_scroll] after this method is not " "required." msgstr "" "Alinea la cámara al nodo rastreado.\n" "[b]Nota:[/b] No es necesario llamar a [method force_update_scroll] después de " "este método." msgid "Forces the camera to update scroll immediately." msgstr "Obliga a la cámara a actualizar el scroll inmediatamente." msgid "" "Returns the specified [enum Side]'s margin. See also [member " "drag_bottom_margin], [member drag_top_margin], [member drag_left_margin], and " "[member drag_right_margin]." msgstr "" "Devuelve el margen del [enum Side] especificado. Véase también [member " "drag_bottom_margin], [member drag_top_margin], [member drag_left_margin] y " "[member drag_right_margin]." msgid "" "Returns the camera limit for the specified [enum Side]. See also [member " "limit_bottom], [member limit_top], [member limit_left], and [member " "limit_right]." msgstr "" "Devuelve el límite de la cámara para el [enum Side] especificado. Véase " "también [member limit_bottom], [member limit_top], [member limit_left] y " "[member limit_right]." msgid "" "Returns the center of the screen from this camera's point of view, in global " "coordinates.\n" "[b]Note:[/b] The exact targeted position of the camera may be different. See " "[method get_target_position]." msgstr "" "Devuelve el centro de la pantalla desde el punto de vista de esta cámara, en " "coordenadas globales.\n" "[b]Nota:[/b] La posición exacta a la que se dirige la cámara puede ser " "diferente. Véase [method get_target_position]." msgid "" "Returns the current screen rotation from this camera's point of view.\n" "[b]Note:[/b] The screen rotation can be different from [member " "Node2D.global_rotation] if the camera is rotating smoothly due to [member " "rotation_smoothing_enabled]." msgstr "" "Devuelve la rotación actual de la pantalla desde el punto de vista de esta " "cámara.\n" "[b]Nota:[/b] La rotación de la pantalla puede ser diferente de [member " "Node2D.global_rotation] si la cámara está rotando suavemente debido a [member " "rotation_smoothing_enabled]." msgid "" "Returns this camera's target position, in global coordinates.\n" "[b]Note:[/b] The returned value is not the same as [member " "Node2D.global_position], as it is affected by the drag properties. It is also " "not the same as the current position if [member position_smoothing_enabled] " "is [code]true[/code] (see [method get_screen_center_position])." msgstr "" "Devuelve la posición objetivo de esta cámara, en coordenadas globales.\n" "[b]Nota:[/b] El valor devuelto no es el mismo que [member " "Node2D.global_position], ya que se ve afectado por las propiedades de " "arrastre (drag). Tampoco es el mismo que la posición actual si [member " "position_smoothing_enabled] es [code]true[/code] (ver [method " "get_screen_center_position])." msgid "" "Returns [code]true[/code] if this [Camera2D] is the active camera (see " "[method Viewport.get_camera_2d])." msgstr "" "Devuelve [code]true[/code] si esta [Camera2D] es la cámara activa (véase " "[method Viewport.get_camera_2d])." msgid "" "Forces this [Camera2D] to become the current active one. [member enabled] " "must be [code]true[/code]." msgstr "" "Fuerza a esta [Camera2D] a convertirse en la activa. [member enabled] debe " "ser [code]true[/code]." msgid "" "Sets the camera's position immediately to its current smoothing destination.\n" "This method has no effect if [member position_smoothing_enabled] is " "[code]false[/code]." msgstr "" "Establece la posición de la cámara inmediatamente a su destino de suavizado " "actual.\n" "Este método no tiene ningún efecto si [member position_smoothing_enabled] es " "[code]false[/code]." msgid "" "Sets the specified [enum Side]'s margin. See also [member " "drag_bottom_margin], [member drag_top_margin], [member drag_left_margin], and " "[member drag_right_margin]." msgstr "" "Establece el margen del [enum Side] especificado. Véase también [member " "drag_bottom_margin], [member drag_top_margin], [member drag_left_margin] y " "[member drag_right_margin]." msgid "" "Sets the camera limit for the specified [enum Side]. See also [member " "limit_bottom], [member limit_top], [member limit_left], and [member " "limit_right]." msgstr "" "Establece el límite de la cámara para el [enum Side] especificado. Véase " "también [member limit_bottom], [member limit_top], [member limit_left] y " "[member limit_right]." msgid "The Camera2D's anchor point." msgstr "El punto de anclaje de Camera2D." msgid "" "The custom [Viewport] node attached to the [Camera2D]. If [code]null[/code] " "or not a [Viewport], uses the default viewport instead." msgstr "" "El nodo personalizado de [Viewport] unido a [Camera2D]. Si [code]null[/code] " "o no es un [Viewport], usa el viewport por defecto en su lugar." msgid "" "Bottom margin needed to drag the camera. A value of [code]1[/code] makes the " "camera move only when reaching the bottom edge of the screen." msgstr "" "Margen inferior necesario para arrastrar la cámara. Un valor de [code]1[/" "code] hace que la cámara se mueva solo cuando alcance el borde inferior de la " "pantalla." msgid "" "If [code]true[/code], the camera only moves when reaching the horizontal " "(left and right) drag margins. If [code]false[/code], the camera moves " "horizontally regardless of margins." msgstr "" "Si es [code]true[/code], la cámara solo se mueve cuando alcanza los márgenes " "de arrastre horizontal (izquierdo y derecho). Si es [code]false[/code], la " "cámara se mueve horizontalmente independientemente de los márgenes." msgid "" "The relative horizontal drag offset of the camera between the right " "([code]-1[/code]) and left ([code]1[/code]) drag margins.\n" "[b]Note:[/b] Used to set the initial horizontal drag offset; determine the " "current offset; or force the current offset. It's not automatically updated " "when [member drag_horizontal_enabled] is [code]true[/code] or the drag " "margins are changed." msgstr "" "El desplazamiento de arrastre horizontal relativo de la cámara entre los " "márgenes de arrastre derecho ([code]-1[/code]) e izquierdo ([code]1[/code]).\n" "[b]Nota:[/b] Se utiliza para establecer el desplazamiento de arrastre " "horizontal inicial, determinar el desplazamiento actual u forzar el " "desplazamiento actual. No se actualiza automáticamente cuando [member " "drag_horizontal_enabled] es [code]true[/code] o se modifican los márgenes de " "arrastre." msgid "" "Left margin needed to drag the camera. A value of [code]1[/code] makes the " "camera move only when reaching the left edge of the screen." msgstr "" "Margen izquierdo necesario para arrastrar la cámara. Un valor de [code]1[/" "code] hace que la cámara se mueva solo cuando alcance el borde izquierdo de " "la pantalla." msgid "" "The relative vertical drag offset of the camera between the bottom ([code]-1[/" "code]) and top ([code]1[/code]) drag margins.\n" "[b]Note:[/b] Used to set the initial vertical drag offset; determine the " "current offset; or force the current offset. It's not automatically updated " "when [member drag_vertical_enabled] is [code]true[/code] or the drag margins " "are changed." msgstr "" "El desplazamiento vertical relativo de arrastre (drag offset) de la cámara " "entre los márgenes de arrastre inferior ([code]-1[/code]) y superior " "([code]1[/code]).\n" "[b]Nota:[/b] Se utiliza para establecer el desplazamiento vertical inicial de " "arrastre; determinar el desplazamiento actual; o forzar el desplazamiento " "actual. No se actualiza automáticamente cuando [member drag_vertical_enabled] " "es [code]true[/code] o se cambian los márgenes de arrastre." msgid "" "If [code]true[/code], draws the camera's drag margin rectangle in the editor." msgstr "" "Si es [code]true[/code], dibuja el rectángulo de margen de arrastre de la " "cámara en el editor." msgid "If [code]true[/code], draws the camera's limits rectangle in the editor." msgstr "" "Si es [code]true[/code], dibuja el rectángulo de límites de la cámara en el " "editor." msgid "If [code]true[/code], draws the camera's screen rectangle in the editor." msgstr "" "Si es [code]true[/code], dibuja el rectángulo de la pantalla de la cámara en " "el editor." msgid "" "Controls whether the camera can be active or not. If [code]true[/code], the " "[Camera2D] will become the main camera when it enters the scene tree and " "there is no active camera currently (see [method Viewport.get_camera_2d]).\n" "When the camera is currently active and [member enabled] is set to " "[code]false[/code], the next enabled [Camera2D] in the scene tree will become " "active." msgstr "" "Controla si la cámara puede estar activa o no. Si es [code]true[/code], el " "[Camera2D] se convertirá en la cámara principal cuando entre en el árbol de " "escenas y no haya una cámara activa actualmente (ver [method " "Viewport.get_camera_2d]).\n" "Cuando la cámara está activa actualmente y [member enabled] se establece en " "[code]false[/code], el siguiente [Camera2D] habilitado en el árbol de escenas " "pasará a estar activo." msgid "" "If [code]true[/code], the camera's rendered view is not affected by its " "[member Node2D.rotation] and [member Node2D.global_rotation]." msgstr "" "Si es [code]true[/code], la vista renderizada de la cámara no se ve afectada " "por su [member Node2D.rotation] ni por su [member Node2D.global_rotation]." msgid "" "If [code]true[/code], the limits will be enabled. Disabling this will allow " "the camera to focus anywhere, when the four [code]limit_*[/code] properties " "will not work." msgstr "" "Si es [code]true[/code], los límites serán habilitados. Deshabilitar esto " "permitirá que la cámara se enfoque en cualquier lugar, por lo que las cuatro " "propiedades [code]limit_*[/code] no funcionarán." msgid "" "If [code]true[/code], the camera smoothly stops when reaches its limits.\n" "This property has no effect if [member position_smoothing_enabled] is " "[code]false[/code].\n" "[b]Note:[/b] To immediately update the camera's position to be within limits " "without smoothing, even with this setting enabled, invoke [method " "reset_smoothing]." msgstr "" "Si es [code]true[/code], la cámara se detiene suavemente cuando alcanza sus " "límites.\n" "Esta propiedad no tiene efecto si [member position_smoothing_enabled] es " "[code]false[/code].\n" "[b]Nota:[/b] Para actualizar inmediatamente la posición de la cámara para que " "esté dentro de los límites sin suavizado, incluso con este ajuste habilitado, " "invoque [method reset_smoothing]." msgid "" "The camera's zoom. Higher values are more zoomed in. For example, a zoom of " "[code]Vector2(2.0, 2.0)[/code] will be twice as zoomed in on each axis (the " "view covers an area four times smaller). In contrast, a zoom of " "[code]Vector2(0.5, 0.5)[/code] will be twice as zoomed out on each axis (the " "view covers an area four times larger). The X and Y components should " "generally always be set to the same value, unless you wish to stretch the " "camera view.\n" "[b]Note:[/b] [member FontFile.oversampling] does [i]not[/i] take [Camera2D] " "zoom into account. This means that zooming in/out will cause bitmap fonts and " "rasterized (non-MSDF) dynamic fonts to appear blurry or pixelated unless the " "font is part of a [CanvasLayer] that makes it ignore camera zoom. To ensure " "text remains crisp regardless of zoom, you can enable MSDF font rendering by " "enabling [member ProjectSettings.gui/theme/" "default_font_multichannel_signed_distance_field] (applies to the default " "project font only), or enabling [b]Multichannel Signed Distance Field[/b] in " "the import options of a DynamicFont for custom fonts. On system fonts, " "[member SystemFont.multichannel_signed_distance_field] can be enabled in the " "inspector." msgstr "" "El zoom de la cámara. Los valores más altos acercan más la vista. Por " "ejemplo, un zoom de [code]Vector2(2.0, 2.0)[/code] acercará el doble en cada " "eje (la vista cubre un área cuatro veces más pequeña). En contraste, un zoom " "de [code]Vector2(0.5, 0.5)[/code] alejará el doble en cada eje (la vista " "cubre un área cuatro veces más grande). Generalmente, los componentes X e Y " "siempre deben establecerse con el mismo valor, a menos que desees estirar la " "vista de la cámara.\n" "[b]Nota:[/b] [member FontFile.oversampling] [i]no[/i] tiene en cuenta el zoom " "de [Camera2D]. Esto significa que acercar o alejar la cámara hará que las " "fuentes de mapa de bits y las fuentes dinámicas rasterizadas (no MSDF) " "aparezcan borrosas o pixeladas, a menos que la fuente forme parte de un " "[CanvasLayer] que haga que ignore el zoom de la cámara. Para asegurar que el " "texto permanezca nítido independientemente del zoom, puedes habilitar el " "renderizado de fuentes MSDF activando [member ProjectSettings.gui/theme/" "default_font_multichannel_signed_distance_field] (se aplica solo a la fuente " "predeterminada del proyecto), o habilitando [b]Campo de Distancia Firmado " "Multicanal[/b] en las opciones de importación de una DynamicFont para fuentes " "personalizadas. En las fuentes del sistema, se puede habilitar [member " "SystemFont.multichannel_signed_distance_field] en el inspector." msgid "" "The camera's position is fixed so that the top-left corner is always at the " "origin." msgstr "" "La posición de la cámara está fijada de tal manera que la esquina superior " "izquierda está siempre en el origen." msgid "" "The camera's position takes into account vertical/horizontal offsets and the " "screen size." msgstr "" "La posición de la cámara tiene en cuenta los desplazamientos verticales/" "horizontales y el tamaño de la pantalla." msgid "" "The camera updates during physics frames (see [constant " "Node.NOTIFICATION_INTERNAL_PHYSICS_PROCESS])." msgstr "" "La cámara se actualiza al mismo tiempo que la física (mira [constant " "Node.NOTIFICATION_INTERNAL_PHYSICS_PROCESS])." msgid "" "The camera updates during process frames (see [constant " "Node.NOTIFICATION_INTERNAL_PROCESS])." msgstr "" "La cámara se actualiza en cada frame de imagen (mira [constant " "Node.NOTIFICATION_INTERNAL_PROCESS])." msgid "Camera node, displays from a point of view." msgstr "Nodo de cámara, muestra desde un punto de vista." msgid "" "If this is the current camera, remove it from being current. If [param " "enable_next] is [code]true[/code], request to make the next camera current, " "if any." msgstr "" "Si esta es la cámara actual, dejar de usarla. Si [param enable_next] es " "[code]true[/code], se solicitará usar la siguiente cámara, si existe." msgid "" "Returns the projection matrix that this camera uses to render to its " "associated viewport. The camera must be part of the scene tree to function." msgstr "" "Devuelve la matriz de proyección que esta cámara utiliza para renderizar a su " "viewport asociado. La cámara debe ser parte del árbol de la escena para " "funcionar." msgid "Returns the camera's RID from the [RenderingServer]." msgstr "Devuelve el RID de la cámara desde el [RenderingServer]." msgid "" "Returns the transform of the camera plus the vertical ([member v_offset]) and " "horizontal ([member h_offset]) offsets; and any other adjustments made to the " "position and orientation of the camera by subclassed cameras such as " "[XRCamera3D]." msgstr "" "Devuelve la transformación de la cámara más los desplazamientos verticales " "([member v_offset]) y horizontales ([member h_offset]); y cualquier otro " "ajuste realizado a la posición y orientación de la cámara por las cámaras " "subclasificadas como [XRCamera3D]." msgid "" "Returns whether or not the specified layer of the [member cull_mask] is " "enabled, given a [param layer_number] between 1 and 20." msgstr "" "Devuelve si la capa especificada de [member cull_mask] está habilitada, dado " "un [param layer_number] entre 1 y 20." msgid "" "Returns the camera's frustum planes in world space units as an array of " "[Plane]s in the following order: near, far, left, top, right, bottom. Not to " "be confused with [member frustum_offset]." msgstr "" "Devuelve los planos del frustum de la cámara en unidades del espacio mundial " "como un array de [Plane]s en el siguiente orden: cerca, lejos, izquierda, " "arriba, derecha, abajo. No confundir con [member frustum_offset]." msgid "" "Returns the RID of a pyramid shape encompassing the camera's view frustum, " "ignoring the camera's near plane. The tip of the pyramid represents the " "position of the camera." msgstr "" "Devuelve el RID de una forma piramidal que abarca el frustum de visión de la " "cámara, ignorando el plano cercano de la cámara. La punta de la pirámide " "representa la posición de la cámara." msgid "" "Returns [code]true[/code] if the given position is behind the camera (the " "blue part of the linked diagram). [url=https://raw.githubusercontent.com/" "godotengine/godot-docs/master/img/camera3d_position_frustum.png]See this " "diagram[/url] for an overview of position query methods.\n" "[b]Note:[/b] A position which returns [code]false[/code] may still be outside " "the camera's field of view." msgstr "" "Devuelve [code]true[/code] si la posición dada está detrás de la cámara (la " "parte azul del diagrama enlazado). [url=https://raw.githubusercontent.com/" "godotengine/godot-docs/master/img/camera3d_position_frustum.png]Véase este " "diagrama[/url] para obtener una visión general de los métodos de consulta de " "posición.\n" "[b]Nota:[/b] Una posición que devuelva [code]false[/code] aún puede estar " "fuera del campo de visión de la cámara." msgid "" "Returns [code]true[/code] if the given position is inside the camera's " "frustum (the green part of the linked diagram). [url=https://" "raw.githubusercontent.com/godotengine/godot-docs/master/img/" "camera3d_position_frustum.png]See this diagram[/url] for an overview of " "position query methods." msgstr "" "Devuelve [code]true[/code] si la posición dada está dentro del frustum de la " "cámara (la parte verde del diagrama enlazado). [url=https://" "raw.githubusercontent.com/godotengine/godot-docs/master/img/" "camera3d_position_frustum.png]Véase este diagrama[/url] para obtener una " "visión general de los métodos de consulta de posición." msgid "" "Makes this camera the current camera for the [Viewport] (see class " "description). If the camera node is outside the scene tree, it will attempt " "to become current once it's added." msgstr "" "Hace que esta cámara sea la cámara actual para el [Viewport] (ver descripción " "de la clase). Si el nodo de la cámara está fuera del árbol de escenas, " "intentará convertirse en actual una vez que se añada." msgid "" "Returns a normal vector from the screen point location directed along the " "camera. Orthogonal cameras are normalized. Perspective cameras account for " "perspective, screen width/height, etc." msgstr "" "Devuelve un vector normal de la ubicación del punto de la pantalla dirigido a " "lo largo de la cámara. Las cámaras ortogonales están normalizadas. Las " "cámaras de perspectiva tienen en cuenta la perspectiva, la anchura y la " "altura de la pantalla, etc." msgid "" "Returns the 3D point in world space that maps to the given 2D coordinate in " "the [Viewport] rectangle on a plane that is the given [param z_depth] " "distance into the scene away from the camera." msgstr "" "Devuelve el punto 3D en el espacio mundial que se corresponde con la " "coordenada 2D dada en el rectángulo del [Viewport], en un plano que está a la " "distancia [param z_depth] en la escena, alejado de la cámara." msgid "" "Returns a normal vector in world space, that is the result of projecting a " "point on the [Viewport] rectangle by the inverse camera projection. This is " "useful for casting rays in the form of (origin, normal) for object " "intersection or picking." msgstr "" "Devuelve un vector normal en el espacio mundial, que es el resultado de " "proyectar un punto en el rectángulo del [Viewport] mediante la proyección " "inversa de la cámara. Esto es útil para lanzar rayos en forma de (origen, " "normal) para la intersección o selección de objetos." msgid "" "Returns a 3D position in world space, that is the result of projecting a " "point on the [Viewport] rectangle by the inverse camera projection. This is " "useful for casting rays in the form of (origin, normal) for object " "intersection or picking." msgstr "" "Devuelve una posición 3D en el espacio mundial, que es el resultado de " "proyectar un punto en el rectángulo del [Viewport] mediante la proyección " "inversa de la cámara. Esto es útil para lanzar rayos en forma de (origen, " "normal) para la intersección o selección de objetos." msgid "" "Based on [param value], enables or disables the specified layer in the " "[member cull_mask], given a [param layer_number] between 1 and 20." msgstr "" "Según [param value], activa o desactiva la capa especificada en el [member " "cull_mask], dado un [param layer_number] entre 1 y 20." msgid "" "Sets the camera projection to orthogonal mode (see [constant " "PROJECTION_ORTHOGONAL]), by specifying a [param size], and the [param z_near] " "and [param z_far] clip planes in world space units.\n" "As a hint, 3D games that look 2D often use this projection, with [param size] " "specified in pixels." msgstr "" "Establece la proyección de la cámara en modo ortogonal (véase [constant " "PROJECTION_ORTHOGONAL]), especificando un [param size], y los planos de " "recorte [param z_near] y [param z_far] en unidades del espacio mundial.\n" "Como sugerencia, los juegos 3D que parecen 2D a menudo usan esta proyección, " "con [param size] especificado en píxeles." msgid "" "Sets the camera projection to perspective mode (see [constant " "PROJECTION_PERSPECTIVE]), by specifying a [param fov] (field of view) angle " "in degrees, and the [param z_near] and [param z_far] clip planes in world " "space units." msgstr "" "Establece la proyección de la cámara en modo de perspectiva (véase [constant " "PROJECTION_PERSPECTIVE]), especificando un ángulo [param fov] (campo de " "visión) en grados, y los planos de recorte [param z_near] y [param z_far] en " "unidades del espacio mundial." msgid "" "Returns the 2D coordinate in the [Viewport] rectangle that maps to the given " "3D point in world space.\n" "[b]Note:[/b] When using this to position GUI elements over a 3D viewport, use " "[method is_position_behind] to prevent them from appearing if the 3D point is " "behind the camera:\n" "[codeblock]\n" "# This code block is part of a script that inherits from Node3D.\n" "# `control` is a reference to a node inheriting from Control.\n" "control.visible = not " "get_viewport().get_camera_3d().is_position_behind(global_transform.origin)\n" "control.position = " "get_viewport().get_camera_3d().unproject_position(global_transform.origin)\n" "[/codeblock]" msgstr "" "Devuelve la coordenada 2D en el rectángulo del [Viewport] que corresponde al " "punto 3D dado en el espacio del mundo.\n" "[b]Nota:[/b] Cuando uses esto para posicionar elementos de la interfaz (GUI) " "sobre una vista 3D, usa [method is_position_behind] para evitar que aparezcan " "si el punto 3D está detrás de la cámara:\n" "[codeblock]\n" "#Este bloque de código es parte de un script que hereda de Node3D.\n" "# `control` es una referencia a un nodo que hereda de Control.\n" "control.visible = not " "get_viewport().get_camera_3d().is_position_behind(global_transform.origin)\n" "control.position = " "get_viewport().get_camera_3d().unproject_position(global_transform.origin)\n" "[/codeblock]" msgid "The [CameraAttributes] to use for this camera." msgstr "Los [CameraAttributes] que se utilizarán para esta cámara." msgid "The [Compositor] to use for this camera." msgstr "El [Compositor] a utilizar para esta cámara." msgid "" "The culling mask that describes which [member VisualInstance3D.layers] are " "rendered by this camera. By default, all 20 user-visible layers are " "rendered.\n" "[b]Note:[/b] Since the [member cull_mask] allows for 32 layers to be stored " "in total, there are an additional 12 layers that are only used internally by " "the engine and aren't exposed in the editor. Setting [member cull_mask] using " "a script allows you to toggle those reserved layers, which can be useful for " "editor plugins.\n" "To adjust [member cull_mask] more easily using a script, use [method " "get_cull_mask_value] and [method set_cull_mask_value].\n" "[b]Note:[/b] [VoxelGI], SDFGI and [LightmapGI] will always take all layers " "into account to determine what contributes to global illumination. If this is " "an issue, set [member GeometryInstance3D.gi_mode] to [constant " "GeometryInstance3D.GI_MODE_DISABLED] for meshes and [member " "Light3D.light_bake_mode] to [constant Light3D.BAKE_DISABLED] for lights to " "exclude them from global illumination." msgstr "" "La máscara de recorte (cull mask) que describe cuáles [member " "VisualInstance3D.layers] son renderizadas por esta cámara. Por defecto, se " "renderizan las 20 capas visibles para el usuario.\n" "[b]Nota:[/b] Dado que la [member cull_mask] permite almacenar 32 capas en " "total, hay 12 capas adicionales que solo se usan internamente por el motor y " "no se muestran en el editor. Configurar la [member cull_mask] mediante un " "script te permite activar o desactivar esas capas reservadas, lo cual puede " "ser útil para complementos (plugins) del editor.\n" "Para ajustar la [member cull_mask] más fácilmente usando un script, usa " "[method get_cull_mask_value] y [method set_cull_mask_value].\n" "[b]Nota:[/b] [VoxelGI], SDFGI y [LightmapGI] siempre tendrán en cuenta todas " "las capas para determinar qué contribuye a la iluminación global. Si esto es " "un problema, establece [member GeometryInstance3D.gi_mode] como [constant " "GeometryInstance3D.GI_MODE_DISABLED] para las mallas y [member " "Light3D.light_bake_mode] como [constant Light3D.BAKE_DISABLED] para las luces " "para excluirlas de la iluminación global." msgid "" "If [code]true[/code], the ancestor [Viewport] is currently using this " "camera.\n" "If multiple cameras are in the scene, one will always be made current. For " "example, if two [Camera3D] nodes are present in the scene and only one is " "current, setting one camera's [member current] to [code]false[/code] will " "cause the other camera to be made current." msgstr "" "Si es [code]true[/code], el [Viewport] ancestro está utilizando actualmente " "esta cámara.\n" "Si hay varias cámaras en la escena, una siempre se establecerá como actual. " "Por ejemplo, si hay dos nodos [Camera3D] en la escena y solo uno es el " "actual, establecer el [member current] de una cámara a [code]false[/code] " "hará que la otra cámara pase a ser la actual." msgid "" "If not [constant DOPPLER_TRACKING_DISABLED], this camera will simulate the " "[url=https://en.wikipedia.org/wiki/Doppler_effect]Doppler effect[/url] for " "objects changed in particular [code]_process[/code] methods.\n" "[b]Note:[/b] The Doppler effect will only be heard on [AudioStreamPlayer3D]s " "if [member AudioStreamPlayer3D.doppler_tracking] is not set to [constant " "AudioStreamPlayer3D.DOPPLER_TRACKING_DISABLED]." msgstr "" "Si no está en [constant DOPPLER_TRACKING_DISABLED], esta cámara simulará el " "[url=https://es.wikipedia.org/wiki/Efecto_Doppler]efecto Doppler[/url] para " "los objetos que cambien en métodos [code]_process[/code] específicos.\n" "[b]Nota:[/b] El efecto Doppler solo se escuchará en los [AudioStreamPlayer3D] " "si su propiedad [member AudioStreamPlayer3D.doppler_tracking] no está " "configurada como [constant AudioStreamPlayer3D.DOPPLER_TRACKING_DISABLED]." msgid "The [Environment] to use for this camera." msgstr "El [Environment] a utilizar para esta cámara." msgid "" "The distance to the far culling boundary for this camera relative to its " "local Z axis. Higher values allow the camera to see further away, while " "decreasing [member far] can improve performance if it results in objects " "being partially or fully culled." msgstr "" "La distancia al límite de recorte lejano (far culling) de esta cámara, " "relativa a su eje Z local. Valores más altos permiten que la cámara vea más " "lejos, mientras que disminuir [member far] puede mejorar el rendimiento si " "esto hace que los objetos se recorten parcial o totalmente." msgid "" "The camera's field of view angle (in degrees). Only applicable in perspective " "mode. Since [member keep_aspect] locks one axis, [member fov] sets the other " "axis' field of view angle.\n" "For reference, the default vertical field of view value ([code]75.0[/code]) " "is equivalent to a horizontal FOV of:\n" "- ~91.31 degrees in a 4:3 viewport\n" "- ~101.67 degrees in a 16:10 viewport\n" "- ~107.51 degrees in a 16:9 viewport\n" "- ~121.63 degrees in a 21:9 viewport" msgstr "" "El ángulo del campo de visión de la cámara (en grados). Solo es aplicable en " "modo perspectiva. Dado que [member keep_aspect] bloquea un eje, [member fov] " "establece el ángulo del campo de visión del otro eje.\n" "Como referencia, el valor predeterminado del campo de visión vertical " "([code]75.0[/code]) es equivalente a un FOV horizontal de:\n" "- ~91.31 grados en un viewport de 4:3\n" "- ~101.67 grados en un viewport de 16:10\n" "- ~107.51 grados en un viewport de 16:9\n" "- ~121.63 grados en un viewport de 21:9" msgid "" "The camera's frustum offset. This can be changed from the default to create " "\"tilted frustum\" effects such as [url=https://zdoom.org/wiki/Y-shearing]Y-" "shearing[/url].\n" "[b]Note:[/b] Only effective if [member projection] is [constant " "PROJECTION_FRUSTUM]." msgstr "" "El desplazamiento del frustum de la cámara. Esto puede cambiarse desde el " "valor predeterminado para crear efectos de \"frustum inclinado\" como el " "[url=https://zdoom.org/wiki/Y-shearing]cizallamiento en Y[/url].\n" "[b]Nota:[/b] Solo es efectivo si [member projection] es [constant " "PROJECTION_FRUSTUM]." msgid "The horizontal (X) offset of the camera viewport." msgstr "El desplazamiento horizontal (X) de la vista de la cámara." msgid "" "The axis to lock during [member fov]/[member size] adjustments. Can be either " "[constant KEEP_WIDTH] or [constant KEEP_HEIGHT]." msgstr "" "El eje a bloquear durante los ajustes de [member fov]/[member size]. Puede " "ser [constant KEEP_WIDTH] o [constant KEEP_HEIGHT]." msgid "" "The distance to the near culling boundary for this camera relative to its " "local Z axis. Lower values allow the camera to see objects more up close to " "its origin, at the cost of lower precision across the [i]entire[/i] range. " "Values lower than the default can lead to increased Z-fighting." msgstr "" "La distancia al límite de recorte cercano (near culling) de esta cámara, " "relativa a su eje Z local. Valores más bajos permiten que la cámara vea " "objetos más de cerca, pero a costa de perder precisión en [i]todo[/i] el " "rango. Usar valores menores al predeterminado puede causar que aumente el \"Z-" "fighting\" (parpadeo de texturas)." msgid "" "The camera's projection mode. In [constant PROJECTION_PERSPECTIVE] mode, " "objects' Z distance from the camera's local space scales their perceived size." msgstr "" "El modo de proyección de la cámara. En el modo [constant " "PROJECTION_PERSPECTIVE], la distancia Z de los objetos al espacio local de la " "cámara escala su tamaño percibido." msgid "" "The camera's size in meters measured as the diameter of the width or height, " "depending on [member keep_aspect]. Only applicable in orthogonal and frustum " "modes." msgstr "" "El tamaño de la cámara en metros, medido como el diámetro del ancho o del " "alto, dependiendo de [member keep_aspect]. Solo es aplicable en los modos " "orthogonal y frustum." msgid "The vertical (Y) offset of the camera viewport." msgstr "El desplazamiento vertical (Y) del viewport de la cámara." msgid "" "Perspective projection. Objects on the screen becomes smaller when they are " "far away." msgstr "" "Proyección de la perspectiva. Los objetos en la pantalla se hacen más " "pequeños cuando están lejos." msgid "" "Orthogonal projection, also known as orthographic projection. Objects remain " "the same size on the screen no matter how far away they are." msgstr "" "Proyección ortogonal, también conocida como proyección ortográfica. Los " "objetos permanecen del mismo tamaño en la pantalla sin importar lo lejos que " "estén." msgid "" "Frustum projection. This mode allows adjusting [member frustum_offset] to " "create \"tilted frustum\" effects." msgstr "" "Proyección de Frustum. Este modo permite ajustar [member frustum_offset] para " "crear efectos de \"frustum inclinado\"." msgid "" "Preserves the horizontal aspect ratio; also known as Vert- scaling. This is " "usually the best option for projects running in portrait mode, as taller " "aspect ratios will benefit from a wider vertical FOV." msgstr "" "Preserva la relación de aspecto horizontal; también conocida como escala de " "Vert-. Esta suele ser la mejor opción para los proyectos que se ejecutan en " "modo de retrato, ya que las proporciones de aspecto más altas se beneficiarán " "de un mayor FOV vertical." msgid "" "Preserves the vertical aspect ratio; also known as Hor+ scaling. This is " "usually the best option for projects running in landscape mode, as wider " "aspect ratios will automatically benefit from a wider horizontal FOV." msgstr "" "Preserva la relación de aspecto vertical; también conocida como escala Hor+. " "Esta suele ser la mejor opción para los proyectos que se ejecutan en modo " "paisaje, ya que las relaciones de aspecto más amplias se beneficiarán " "automáticamente de un FOV horizontal más amplio." msgid "" "Simulate [url=https://en.wikipedia.org/wiki/Doppler_effect]Doppler effect[/" "url] by tracking positions of objects that are changed in [code]_process[/" "code]. Changes in the relative velocity of this camera compared to those " "objects affect how audio is perceived (changing the audio's [member " "AudioStreamPlayer3D.pitch_scale])." msgstr "" "Simula el [url=https://es.wikipedia.org/wiki/Efecto_Doppler]efecto Doppler[/" "url] rastreando las posiciones de los objetos que cambian en [code]_process[/" "code]. Los cambios en la velocidad relativa de esta cámara en comparación con " "esos objetos afectan a cómo se percibe el audio (cambiando el [member " "AudioStreamPlayer3D.pitch_scale] del audio)." msgid "" "Simulate [url=https://en.wikipedia.org/wiki/Doppler_effect]Doppler effect[/" "url] by tracking positions of objects that are changed in " "[code]_physics_process[/code]. Changes in the relative velocity of this " "camera compared to those objects affect how audio is perceived (changing the " "audio's [member AudioStreamPlayer3D.pitch_scale])." msgstr "" "Simular el [url=https://es.wikipedia.org/wiki/Efecto_Doppler]efecto Doppler[/" "url] rastreando las posiciones de los objetos que cambian en " "[code]_physics_process[/code]. Los cambios en la velocidad relativa de esta " "cámara en comparación con esos objetos afectan a cómo se percibe el audio " "(cambiando el [member AudioStreamPlayer3D.pitch_scale] del audio)." msgid "Parent class for camera settings." msgstr "Clase padre para la configuración de la cámara." msgid "" "Controls camera-specific attributes such as depth of field and exposure " "override.\n" "When used in a [WorldEnvironment] it provides default settings for exposure, " "auto-exposure, and depth of field that will be used by all cameras without " "their own [CameraAttributes], including the editor camera. When used in a " "[Camera3D] it will override any [CameraAttributes] set in the " "[WorldEnvironment]. When used in [VoxelGI] or [LightmapGI], only the exposure " "settings will be used.\n" "See also [Environment] for general 3D environment settings.\n" "This is a pure virtual class that is inherited by [CameraAttributesPhysical] " "and [CameraAttributesPractical]." msgstr "" "Controla los atributos específicos de la cámara, como la profundidad de campo " "(depth of field) y la anulación de la exposición (exposure override).\n" "Cuando se utiliza en un [WorldEnvironment], proporciona los ajustes " "predeterminados de exposición, exposición automática y profundidad de campo " "que usarán todas las cámaras que no tengan sus propios [CameraAttributes], " "incluida la cámara del editor. Cuando se usa en un [Camera3D], anulará " "cualquier [CameraAttributes] configurado en el [WorldEnvironment]. Al usarse " "en [VoxelGI] o [LightmapGI], solo se utilizarán los ajustes de exposición.\n" "Consulta también [Environment] para los ajustes generales del entorno 3D.\n" "Esta es una clase virtual pura heredada por [CameraAttributesPhysical] y " "[CameraAttributesPractical]." msgid "" "The scale of the auto exposure effect. Affects the intensity of auto exposure." msgstr "" "La escala del efecto de la exposición automática. Afecta a la intensidad de " "la exposición automática." msgid "" "The speed of the auto exposure effect. Affects the time needed for the camera " "to perform auto exposure." msgstr "" "La velocidad del efecto de la exposición automática. Afecta al tiempo " "necesario para que la cámara realice la exposición automática." msgid "" "Multiplier for the exposure amount. A higher value results in a brighter " "image." msgstr "" "Multiplicador para la cantidad de exposición. Un valor más alto da como " "resultado una imagen más brillante." msgid "" "Sensitivity of camera sensors, measured in ISO. A higher sensitivity results " "in a brighter image.\n" "If [member auto_exposure_enabled] is [code]true[/code], this can be used as a " "method of exposure compensation, doubling the value will increase the " "exposure value (measured in EV100) by 1 stop.\n" "[b]Note:[/b] Only available when [member ProjectSettings.rendering/" "lights_and_shadows/use_physical_light_units] is enabled." msgstr "" "Sensibilidad de los sensores de cámara, medida en ISO. Una sensibilidad mayor " "produce una imagen más brillante.\n" "Si [member auto_exposure_enabled] está [code]true[/code], esto puede " "utilizarse como método de compensación de exposición; duplicar el valor " "aumentará el valor de exposición (medido en EV100) en 1 parada.\n" "[b]Nota:[/b] Solo disponible cuando [member ProjectSettings.rendering/" "lights_and_shadows/use_physical_light_units] está habilitado." msgid "Physically-based camera settings." msgstr "Configuración de la cámara basada en la física." msgid "Physical light and camera units" msgstr "Unidades físicas de luz y cámara" msgid "" "Returns the vertical field of view that corresponds to the [member " "frustum_focal_length]. This value is calculated internally whenever [member " "frustum_focal_length] is changed." msgstr "" "Devuelve el campo de visión vertical que corresponde a [member " "frustum_focal_length]. Este valor se calcula internamente cada vez que se " "cambia [member frustum_focal_length]." msgid "" "The maximum luminance (in EV100) used when calculating auto exposure. When " "calculating scene average luminance, color values will be clamped to at least " "this value. This limits the auto-exposure from exposing below a certain " "brightness, resulting in a cut off point where the scene will remain bright." msgstr "" "La luminancia máxima (en EV100) utilizada al calcular la exposición " "automática. Al calcular la luminancia media de la escena, los valores de " "color se limitarán a este valor como mínimo. Esto limita la exposición " "automática a exponer por debajo de un cierto brillo, lo que resulta en un " "punto de corte donde la escena permanecerá brillante." msgid "" "The minimum luminance (in EV100) used when calculating auto exposure. When " "calculating scene average luminance, color values will be clamped to at least " "this value. This limits the auto-exposure from exposing above a certain " "brightness, resulting in a cut off point where the scene will remain dark." msgstr "" "La luminancia mínima (en EV100) utilizada al calcular la exposición " "automática. Al calcular la luminancia media de la escena, los valores de " "color se limitarán a este valor como mínimo. Esto limita la exposición " "automática a exponer por encima de un cierto brillo, lo que resulta en un " "punto de corte donde la escena permanecerá oscura." msgid "" "Time for shutter to open and close, evaluated as [code]1 / shutter_speed[/" "code] seconds. A higher value will allow less light (leading to a darker " "image), while a lower value will allow more light (leading to a brighter " "image).\n" "Only available when [member ProjectSettings.rendering/lights_and_shadows/" "use_physical_light_units] is enabled." msgstr "" "Tiempo para que el obturador se abra y se cierre, evaluado como [code]1 / " "velocidad_de_obturación[/code] segundos. Un valor más alto permitirá menos " "luz (lo que conducirá a una imagen más oscura), mientras que un valor más " "bajo permitirá más luz (lo que conducirá a una imagen más brillante).\n" "Solo disponible cuando [member ProjectSettings.rendering/lights_and_shadows/" "use_physical_light_units] está habilitado." msgid "" "Override value for [member Camera3D.far]. Used internally when calculating " "depth of field. When attached to a [Camera3D] as its [member " "Camera3D.attributes], it will override the [member Camera3D.far] property." msgstr "" "Valor de reemplazo para [member Camera3D.far]. Se usa internamente al " "calcular la profundidad de campo. Cuando se adjunta a una [Camera3D] como sus " "[member Camera3D.attributes], reemplazará la propiedad [member Camera3D.far]." msgid "" "Distance between camera lens and camera aperture, measured in millimeters. " "Controls field of view and depth of field. A larger focal length will result " "in a smaller field of view and a narrower depth of field meaning fewer " "objects will be in focus. A smaller focal length will result in a wider field " "of view and a larger depth of field meaning more objects will be in focus. " "When attached to a [Camera3D] as its [member Camera3D.attributes], it will " "override the [member Camera3D.fov] property and the [member " "Camera3D.keep_aspect] property." msgstr "" "Distancia entre la lente de la cámara y la apertura de la cámara, medida en " "milímetros. Controla el campo de visión y la profundidad de campo. Una " "distancia focal mayor resultará en un campo de visión más pequeño y una " "profundidad de campo más estrecha, lo que significa que menos objetos estarán " "enfocados. Una distancia focal más pequeña resultará en un campo de visión " "más amplio y una profundidad de campo mayor, lo que significa que más objetos " "estarán enfocados. Cuando se adjunta a una [Camera3D] como sus [member " "Camera3D.attributes], sobrescribirá la propiedad [member Camera3D.fov] y la " "propiedad [member Camera3D.keep_aspect]." msgid "" "Distance from camera of object that will be in focus, measured in meters. " "Internally this will be clamped to be at least 1 millimeter larger than " "[member frustum_focal_length]." msgstr "" "Distancia desde la cámara del objeto que estará enfocado, medida en metros. " "Internamente, esto se sujetará para que sea al menos 1 milímetro más grande " "que [member frustum_focal_length]." msgid "" "Override value for [member Camera3D.near]. Used internally when calculating " "depth of field. When attached to a [Camera3D] as its [member " "Camera3D.attributes], it will override the [member Camera3D.near] property." msgstr "" "Valor de reemplazo para [member Camera3D.near]. Se usa internamente al " "calcular la profundidad de campo. Cuando se adjunta a una [Camera3D] como sus " "[member Camera3D.attributes], reemplazará la propiedad [member Camera3D.near]." msgid "Camera settings in an easy to use format." msgstr "Ajustes de la cámara en un formato fácil de usar." msgid "" "A camera feed gives you access to a single physical camera attached to your " "device." msgstr "" "La alimentación de la cámara le da acceso a una única cámara física conectada " "a tu dispositivo." msgid "" "A camera feed gives you access to a single physical camera attached to your " "device. When enabled, Godot will start capturing frames from the camera which " "can then be used. See also [CameraServer].\n" "[b]Note:[/b] Many cameras will return YCbCr images which are split into two " "textures and need to be combined in a shader. Godot does this automatically " "for you if you set the environment to show the camera image in the " "background.\n" "[b]Note:[/b] This class is currently only implemented on Linux, Android, " "macOS, and iOS. On other platforms no [CameraFeed]s will be available. To get " "a [CameraFeed] on iOS, enable [member EditorExportPlatformIOS.modules/camera]." msgstr "" "Una transmisión de cámara te da acceso a una cámara física conectada a tu " "dispositivo. Al activarla, Godot comenzará a capturar fotogramas de la " "cámara, que luego podrás usar. Véase también [CameraServer].\n" "[b]Nota:[/b] Muchas cámaras devuelven imágenes YCbCr que se dividen en dos " "texturas y deben combinarse en un shader. Godot lo hace automáticamente si " "configuras el entorno para mostrar la imagen de la cámara en segundo plano.\n" "[b]Nota:[/b] Esta clase actualmente solo está implementada en Linux, Android, " "macOS e iOS. En otras plataformas no habrá [CameraFeed] disponibles. Para " "obtener un [CameraFeed] en iOS, habilita [member " "EditorExportPlatformIOS.modules/camera]." msgid "Called when the camera feed is activated." msgstr "Se llama cuando se activa la transmisión de la cámara." msgid "Called when the camera feed is deactivated." msgstr "Se llama cuando la transmisión de la cámara está desactivada." msgid "Returns the camera's name." msgstr "Devuelve el nombre de la cámara." msgid "Returns the position of camera on the device." msgstr "Devuelve la posición de la cámara en el dispositivo." msgid "" "Returns the texture backend ID (usable by some external libraries that need a " "handle to a texture to write data)." msgstr "" "Devuelve el ID del backend de la textura (utilizable por algunas bibliotecas " "externas que necesitan un identificador para una textura para escribir datos)." msgid "Sets the feed as external feed provided by another library." msgstr "" "Establece la fuente como una fuente externa proporcionada por otra biblioteca." msgid "" "Sets the feed format parameters for the given [param index] in the [member " "formats] array. Returns [code]true[/code] on success. By default, the YUYV " "encoded stream is transformed to [constant FEED_RGB]. The YUYV encoded stream " "output format can be changed by setting [param parameters]'s [code]output[/" "code] entry to one of the following:\n" "- [code]\"separate\"[/code] will result in [constant FEED_YCBCR_SEP];\n" "- [code]\"grayscale\"[/code] will result in desaturated [constant FEED_RGB];\n" "- [code]\"copy\"[/code] will result in [constant FEED_YCBCR]." msgstr "" "Establece los parámetros de formato de la fuente para el [param index] dado " "en el arreglo [member formats]. Devuelve [code]true[/code] en caso de éxito. " "Por defecto, el flujo codificado en YUYV se transforma a [constant FEED_RGB]. " "El formato de salida del flujo codificado en YUYV se puede cambiar " "estableciendo la entrada [code]output[/code] de [param parameters] a uno de " "los siguientes:\n" "- [code]\"separate\"[/code] resultará en [constant FEED_YCBCR_SEP];\n" "- [code]\"grayscale\"[/code] resultará en un [constant FEED_RGB] desaturado;\n" "- [code]\"copy\"[/code] resultará en [constant FEED_YCBCR]." msgid "Sets the camera's name." msgstr "Establece el nombre de la cámara." msgid "Sets the position of this camera." msgstr "Establece la posición de esta cámara." msgid "Sets Y and CbCr images for this feed." msgstr "Establece las imágenes Y y CbCr para esta fuente (feed)." msgid "If [code]true[/code], the feed is active." msgstr "Si es [code]true[/code], el feed está activo." msgid "" "Formats supported by the feed. Each entry is a [Dictionary] describing format " "parameters." msgstr "" "Formatos compatibles con la fuente. Cada entrada es un [Dictionary] que " "describe los parámetros del formato." msgid "Emitted when the format has changed." msgstr "Emitida cuando el formato ha cambiado." msgid "No image set for the feed." msgstr "No hay ninguna imagen establecida para el feed." msgid "Feed supplies RGB images." msgstr "Proporciona imágenes RGB." msgid "Feed supplies YCbCr images that need to be converted to RGB." msgstr "Proporciona imágenes YCbCr que necesitan ser convertidas a RGB." msgid "" "Feed supplies separate Y and CbCr images that need to be combined and " "converted to RGB." msgstr "" "El sistema de alimentación proporciona imágenes Y y CbCr separadas que deben " "combinarse y convertirse a RGB." msgid "Feed supplies external image." msgstr "El feed proporciona una imagen externa." msgid "Unspecified position." msgstr "Posición no especificada." msgid "Camera is mounted at the front of the device." msgstr "La cámara está montada en la parte frontal del dispositivo." msgid "Camera is mounted at the back of the device." msgstr "La cámara está montada en la parte trasera del dispositivo." msgid "Server keeping track of different cameras accessible in Godot." msgstr "" "El servidor mantiene un seguimiento de las diferentes cámaras accesibles en " "Godot." msgid "Adds the camera [param feed] to the camera server." msgstr "Agrega la cámara [param feed] al servidor de cámara." msgid "Returns an array of [CameraFeed]s." msgstr "Devuelve un array de [CameraFeed]s." msgid "" "Returns the [CameraFeed] corresponding to the camera with the given [param " "index]." msgstr "" "Devuelve el [CameraFeed] correspondiente a la cámara con el [param index] " "dado." msgid "Returns the number of [CameraFeed]s registered." msgstr "Devuelve el número de [CameraFeed]s registrados." msgid "Removes the specified camera [param feed]." msgstr "Elimina el [param feed] de la cámara especificada." msgid "" "If [code]true[/code], the server is actively monitoring available camera " "feeds.\n" "This has a performance cost, so only set it to [code]true[/code] when you're " "actively accessing the camera.\n" "[b]Note:[/b] After setting it to [code]true[/code], you can receive updated " "camera feeds through the [signal camera_feeds_updated] signal.\n" "[codeblocks]\n" "[gdscript]\n" "func _ready():\n" "\tCameraServer.camera_feeds_updated.connect(_on_camera_feeds_updated)\n" "\tCameraServer.monitoring_feeds = true\n" "\n" "func _on_camera_feeds_updated():\n" "\tvar feeds = CameraServer.feeds()\n" "[/gdscript]\n" "[csharp]\n" "public override void _Ready()\n" "{\n" "\tCameraServer.CameraFeedsUpdated += OnCameraFeedsUpdated;\n" "\tCameraServer.MonitoringFeeds = true;\n" "}\n" "\n" "void OnCameraFeedsUpdated()\n" "{\n" "\tvar feeds = CameraServer.Feeds();\n" "}\n" "[/csharp]\n" "[/codeblocks]" msgstr "" "Si es [code]true[/code], el servidor está monitoreando activamente las " "fuentes de cámara disponibles.\n" "Esto tiene un costo de rendimiento, por lo que solo establécelo en " "[code]true[/code] cuando estés accediendo activamente a la cámara.\n" "[b]Nota:[/b] Después de establecerlo en [code]true[/code], puedes recibir " "fuentes de cámara actualizadas a través de la señal [signal " "camera_feeds_updated].\n" "[codeblocks]\n" "[gdscript]\n" "func _ready():\n" "\tCameraServer.camera_feeds_updated.connect(_on_camera_feeds_updated)\n" "\tCameraServer.monitoring_feeds = true\n" "\n" "func _on_camera_feeds_updated():\n" "\tvar feeds = CameraServer.feeds()\n" "[/gdscript]\n" "[csharp]\n" "public override void _Ready()\n" "{\n" "\tCameraServer.CameraFeedsUpdated += OnCameraFeedsUpdated;\n" "\tCameraServer.MonitoringFeeds = true;\n" "}\n" "\n" "void OnCameraFeedsUpdated()\n" "{\n" "\tvar feeds = CameraServer.Feeds();\n" "}\n" "[/csharp]\n" "[/codeblocks]" msgid "Emitted when a [CameraFeed] is removed (e.g. a webcam is unplugged)." msgstr "" "Emitida cuando se retira una [CameraFeed] (por ejemplo, se desenchufa una " "cámara web)." msgid "The RGBA camera image." msgstr "La imagen de la cámara RGBA." msgid "The [url=https://en.wikipedia.org/wiki/YCbCr]YCbCr[/url] camera image." msgstr "" "La imagen de la cámara [url=https://en.wikipedia.org/wiki/YCbCr]YCbCr[/url]." msgid "The Y component camera image." msgstr "La imagen de la cámara del componente Y." msgid "The CbCr component camera image." msgstr "La imagen de la cámara del componente CbCr." msgid "Texture provided by a [CameraFeed]." msgstr "Textura proporcionada por un [CameraFeed]." msgid "" "This texture gives access to the camera texture provided by a [CameraFeed].\n" "[b]Note:[/b] Many cameras supply YCbCr images which need to be converted in a " "shader." msgstr "" "Esta textura da acceso a la textura de la cámara proporcionada por un " "[CameraFeed].\n" "[b]Nota:[/b] Muchas cámaras suministran imágenes YCbCr que necesitan ser " "convertidas en un shader." msgid "The ID of the [CameraFeed] for which we want to display the image." msgstr "El ID del [CameraFeed] para el cual queremos mostrar la imagen." msgid "" "Convenience property that gives access to the active property of the " "[CameraFeed]." msgstr "" "Propiedad de conveniencia que da acceso a la propiedad activa de la " "[CameraFeed]." msgid "" "Which image within the [CameraFeed] we want access to, important if the " "camera image is split in a Y and CbCr component." msgstr "" "La imagen dentro de la [CameraFeed] a la que queremos acceder, es importante " "si la imagen de la cámara está dividida en un componente Y y CbCr." msgid "Merges several 2D nodes into a single draw operation." msgstr "Combina varios nodos 2D en una única operación de dibujo." msgid "" "Child [CanvasItem] nodes of a [CanvasGroup] are drawn as a single object. It " "allows to e.g. draw overlapping translucent 2D nodes without causing the " "overlapping sections to be more opaque than intended (set the [member " "CanvasItem.self_modulate] property on the [CanvasGroup] to achieve this " "effect).\n" "[b]Note:[/b] The [CanvasGroup] uses a custom shader to read from the " "backbuffer to draw its children. Assigning a [Material] to the [CanvasGroup] " "overrides the built-in shader. To duplicate the behavior of the built-in " "shader in a custom [Shader], use the following:\n" "[codeblock]\n" "shader_type canvas_item;\n" "render_mode unshaded;\n" "\n" "uniform sampler2D screen_texture : hint_screen_texture, repeat_disable, " "filter_nearest;\n" "\n" "void fragment() {\n" "\tvec4 c = textureLod(screen_texture, SCREEN_UV, 0.0);\n" "\n" "\tif (c.a > 0.0001) {\n" "\t\tc.rgb /= c.a;\n" "\t}\n" "\n" "\tCOLOR *= c;\n" "}\n" "[/codeblock]\n" "[b]Note:[/b] Since [CanvasGroup] and [member CanvasItem.clip_children] both " "utilize the backbuffer, children of a [CanvasGroup] who have their [member " "CanvasItem.clip_children] set to anything other than [constant " "CanvasItem.CLIP_CHILDREN_DISABLED] will not function correctly." msgstr "" "Los nodos hijos [CanvasItem] de un [CanvasGroup] se dibujan como un objeto " "único. Permite, por ejemplo, dibujar nodos 2D traslúcidos superpuestos sin " "que las secciones solapadas sean más opacas de lo previsto (establece la " "propiedad [member CanvasItem.self_modulate] en el [CanvasGroup] para lograr " "este efecto).\n" "[b]Nota:[/b] El [CanvasGroup] utiliza un shader personalizado para leer desde " "el backbuffer y dibujar a sus hijos. Asignar un [Material] al [CanvasGroup] " "anula el shader integrado. Para duplicar el comportamiento del shader " "integrado en un [Shader] personalizado, utiliza lo siguiente:\n" "[codeblock]\n" "shader_type canvas_item;\n" "render_mode unshaded;\n" "\n" "uniform sampler2D screen_texture : hint_screen_texture, repeat_disable, " "filter_nearest;\n" "\n" "void fragment() {\n" "\tvec4 c = textureLod(screen_texture, SCREEN_UV, 0.0);\n" "\n" "\tif (c.a > 0.0001) {\n" "\t\tc.rgb /= c.a;\n" "\t}\n" "\n" "\tCOLOR *= c;\n" "}\n" "[/codeblock]\n" "[b]Nota:[/b] Dado que tanto [CanvasGroup] como [member " "CanvasItem.clip_children] utilizan el backbuffer, los hijos de un " "[CanvasGroup] que tengan su [member CanvasItem.clip_children] establecido en " "cualquier valor distinto de [constant CanvasItem.CLIP_CHILDREN_DISABLED] no " "funcionarán correctamente." msgid "" "Sets the size of the margin used to expand the clearing rect of this " "[CanvasGroup]. This expands the area of the backbuffer that will be used by " "the [CanvasGroup]. A smaller margin will reduce the area of the backbuffer " "used which can increase performance, however if [member use_mipmaps] is " "enabled, a small margin may result in mipmap errors at the edge of the " "[CanvasGroup]. Accordingly, this should be left as small as possible, but " "should be increased if artifacts appear along the edges of the canvas group." msgstr "" "Establece el tamaño del margen utilizado para expandir el área de borrado de " "este [CanvasGroup]. Esto expande el área del búfer de fondo que utilizará el " "[CanvasGroup]. Un margen menor reducirá el área del búfer de fondo utilizada, " "lo que puede mejorar el rendimiento; sin embargo, si [member use_mipmaps] " "está habilitado, un margen pequeño puede provocar errores de mipmap en el " "borde del [CanvasGroup]. Por lo tanto, debe dejarse lo más pequeño posible, " "pero debe aumentarse si aparecen artefactos en los bordes del grupo de " "lienzos." msgid "" "Sets the size of a margin used to expand the drawable rect of this " "[CanvasGroup]. The size of the [CanvasGroup] is determined by fitting a rect " "around its children then expanding that rect by [member fit_margin]. This " "increases both the backbuffer area used and the area covered by the " "[CanvasGroup] both of which can reduce performance. This should be kept as " "small as possible and should only be expanded when an increased size is " "needed (e.g. for custom shader effects)." msgstr "" "Establece el tamaño de un margen utilizado para expandir el rectángulo " "dibujable de este [CanvasGroup]. El tamaño del [CanvasGroup] se determina " "ajustando un rectángulo alrededor de sus elementos secundarios y luego " "expandiendo ese rectángulo mediante [member fit_margin]. Esto aumenta tanto " "el área del backbuffer utilizada como el área cubierta por el [CanvasGroup], " "lo que puede reducir el rendimiento. Este margen debe mantenerse lo más " "pequeño posible y solo debe expandirse cuando se necesite un tamaño mayor " "(por ejemplo, para efectos de sombreado personalizados)." msgid "" "If [code]true[/code], calculates mipmaps for the backbuffer before drawing " "the [CanvasGroup] so that mipmaps can be used in a custom [ShaderMaterial] " "attached to the [CanvasGroup]. Generating mipmaps has a performance cost so " "this should not be enabled unless required." msgstr "" "Si es [code]true[/code], calcula los mipmaps para el backbuffer antes de " "dibujar el [CanvasGroup] para que los mipmaps se puedan usar en un " "[ShaderMaterial] personalizado adjunto al [CanvasGroup]. La generación de " "mipmaps tiene un coste de rendimiento, por lo que no debe habilitarse a menos " "que sea necesario." msgid "Abstract base class for everything in 2D space." msgstr "Clase base abstracta para todo en el espacio 2D." msgid "" "Abstract base class for everything in 2D space. Canvas items are laid out in " "a tree; children inherit and extend their parent's transform. [CanvasItem] is " "extended by [Control] for GUI-related nodes, and by [Node2D] for 2D game " "objects.\n" "Any [CanvasItem] can draw. For this, [method queue_redraw] is called by the " "engine, then [constant NOTIFICATION_DRAW] will be received on idle time to " "request a redraw. Because of this, canvas items don't need to be redrawn on " "every frame, improving the performance significantly. Several functions for " "drawing on the [CanvasItem] are provided (see [code]draw_*[/code] functions). " "However, they can only be used inside [method _draw], its corresponding " "[method Object._notification] or methods connected to the [signal draw] " "signal.\n" "Canvas items are drawn in tree order on their canvas layer. By default, " "children are on top of their parents, so a root [CanvasItem] will be drawn " "behind everything. This behavior can be changed on a per-item basis.\n" "A [CanvasItem] can be hidden, which will also hide its children. By adjusting " "various other properties of a [CanvasItem], you can also modulate its color " "(via [member modulate] or [member self_modulate]), change its Z-index, blend " "mode, and more.\n" "Note that properties like transform, modulation, and visibility are only " "propagated to [i]direct[/i] [CanvasItem] child nodes. If there is a non-" "[CanvasItem] node in between, like [Node] or [AnimationPlayer], the " "[CanvasItem] nodes below will have an independent position and [member " "modulate] chain. See also [member top_level]." msgstr "" "Clase base abstracta para todo en el espacio 2D. Los elementos de Canvas se " "disponen en un árbol; los elementos secundarios heredan y extienden la " "transformación de su elemento primario. [CanvasItem] se extiende mediante " "[Control] para los nodos relacionados con la interfaz gráfica de usuario y " "mediante [Node2D] para los objetos de juego 2D.\n" "Cualquier [CanvasItem] puede dibujar. Para ello, el motor llama a [method " "queue_redraw] y, en tiempo de inactividad, se recibe [constant " "NOTIFICATION_DRAW] para solicitar un redibujado. Gracias a esto, no es " "necesario redibujar los elementos del canvas en cada fotograma, lo que mejora " "significativamente el rendimiento. Se proporcionan varias funciones para " "dibujar en [CanvasItem] (consulta las funciones [code]draw_*[/code]). Sin " "embargo, solo se pueden usar dentro de [method _draw], su [method " "Object._notification] correspondiente o métodos conectados a la señal [signal " "draw].\n" "Los elementos de Canvas se dibujan en orden de árbol en su capa de canvas. De " "forma predeterminada, los elementos secundarios se ubican encima de los " "primarios, por lo que se dibujará un elemento raíz [CanvasItem] detrás de " "cada elemento. Este comportamiento se puede modificar individualmente.\n" "Un elemento [CanvasItem] se puede ocultar, lo que también ocultará a sus " "elementos secundarios. Ajustando otras propiedades de un elemento " "[CanvasItem], también se puede modular su color (mediante [member modulate] o " "[member self_modulate]), cambiar su índice Z, modo de fusión, etc.\n" "Ten en cuenta que propiedades como la transformación, la modulación y la " "visibilidad solo se propagan a los nodos hijos [i]directos[/i] de " "[CanvasItem]. Si hay un nodo que no sea [CanvasItem] entre ellos, como [Node] " "o [AnimationPlayer], los nodos [CanvasItem] inferiores tendrán una posición y " "una cadena [member modulate] independientes. Véase también [member top_level]." msgid "Viewport and canvas transforms" msgstr "Transformaciones de la ventana gráfica y del lienzo" msgid "Custom drawing in 2D" msgstr "Dibujo personalizado en 2D" msgid "" "Subsequent drawing commands will be ignored unless they fall within the " "specified animation slice. This is a faster way to implement animations that " "loop on background rather than redrawing constantly." msgstr "" "Los comandos de dibujo subsiguientes se ignorarán a menos que se encuentren " "dentro del segmento de animación especificado. Esta es una forma más rápida " "de implementar animaciones que se repiten en segundo plano en lugar de " "redibujar constantemente." msgid "" "Draws an unfilled arc between the given angles with a uniform [param color] " "and [param width] and optional antialiasing (supported only for positive " "[param width]). The larger the value of [param point_count], the smoother the " "curve. [param center] is defined in local space. For elliptical arcs, see " "[method draw_ellipse_arc]. See also [method draw_circle].\n" "If [param width] is negative, it will be ignored and the arc will be drawn " "using [constant RenderingServer.PRIMITIVE_LINE_STRIP]. This means that when " "the CanvasItem is scaled, the arc will remain thin. If this behavior is not " "desired, then pass a positive [param width] like [code]1.0[/code].\n" "The arc is drawn from [param start_angle] towards the value of [param " "end_angle] so in clockwise direction if [code]start_angle < end_angle[/code] " "and counter-clockwise otherwise. Passing the same angles but in reversed " "order will produce the same arc. If absolute difference of [param " "start_angle] and [param end_angle] is greater than [constant @GDScript.TAU] " "radians, then a full circle arc is drawn (i.e. arc will not overlap itself)." msgstr "" "Dibuja un arco sin relleno entre los ángulos dados con un [param color] y " "[param width] uniformes y antialiasing opcional (soportado solo para [param " "width] positivo). Cuanto mayor sea el valor de [param point_count], más suave " "será la curva. [param center] se define en el espacio local. Para arcos " "elípticos, consulta [method draw_ellipse_arc]. Véase también [method " "draw_circle].\n" "Si [param width] es negativo, se ignorará y el arco se dibujará usando " "[constant RenderingServer.PRIMITIVE_LINE_STRIP]. Esto significa que cuando el " "CanvasItem se escale, el arco permanecerá delgado. Si no se desea este " "comportamiento, pasa un [param width] positivo como [code]1.0[/code].\n" "El arco se dibuja desde [param start_angle] hacia el valor de [param " "end_angle], por lo tanto en sentido horario si [code]start_angle < end_angle[/" "code] y en sentido antihorario en caso contrario. Pasar los mismos ángulos " "pero en orden inverso producirá el mismo arco. Si la diferencia absoluta " "entre [param start_angle] y [param end_angle] es mayor que [constant " "@GDScript.TAU] radianes, entonces se dibuja un arco de círculo completo (es " "decir, el arco no se superpondrá a sí mismo)." msgid "" "Draws a circle, with [param position] defined in local space. See also " "[method draw_ellipse], [method draw_arc], [method draw_polyline], and [method " "draw_polygon].\n" "If [param filled] is [code]true[/code], the circle will be filled with the " "[param color] specified. If [param filled] is [code]false[/code], the circle " "will be drawn as a stroke with the [param color] and [param width] " "specified.\n" "If [param width] is negative, then two-point primitives will be drawn instead " "of a four-point ones. This means that when the CanvasItem is scaled, the " "lines will remain thin. If this behavior is not desired, then pass a positive " "[param width] like [code]1.0[/code].\n" "If [param antialiased] is [code]true[/code], half transparent \"feathers\" " "will be attached to the boundary, making outlines smooth.\n" "[b]Note:[/b] [param width] is only effective if [param filled] is " "[code]false[/code]." msgstr "" "Dibuja un círculo, con [param position] definido en el espacio local. Véase " "también [method draw_ellipse], [method draw_arc], [method draw_polyline] y " "[method draw_polygon].\n" "Si [param filled] es [code]true[/code], el círculo se rellenará con el [param " "color] especificado. Si [param filled] es [code]false[/code], el círculo se " "dibujará como un trazo con el [param color] y [param width] especificados.\n" "Si [param width] es negativo, se dibujarán primitivas de dos puntos en lugar " "de cuatro. Esto significa que cuando el CanvasItem se escale, las líneas " "permanecerán delgadas. Si no se desea este comportamiento, pasa un [param " "width] positivo como [code]1.0[/code].\n" "Si [param antialiased] es [code]true[/code], se adjuntarán \"plumas\" " "semitransparentes al límite, haciendo que los contornos sean suaves.\n" "[b]Nota:[/b] [param width] solo es efectivo si [param filled] es [code]false[/" "code]." msgid "" "Draws a colored polygon of any number of points, convex or concave. The " "points in the [param points] array are defined in local space. Unlike [method " "draw_polygon], a single color must be specified for the whole polygon.\n" "[b]Note:[/b] If you frequently redraw the same polygon with a large number of " "vertices, consider pre-calculating the triangulation with [method " "Geometry2D.triangulate_polygon] and using [method draw_mesh], [method " "draw_multimesh], or [method RenderingServer.canvas_item_add_triangle_array].\n" "[b]Note:[/b] Styleboxes, textures, and meshes stored only inside local " "variables should [b]not[/b] be used with this method in GDScript, because the " "drawing operation doesn't begin immediately once this method is called. In " "GDScript, when the function with the local variables ends, the local " "variables get destroyed before the rendering takes place." msgstr "" "Dibuja un polígono coloreado de cualquier número de puntos, convexo o " "cóncavo. Los puntos en el array [param points] se definen en el espacio " "local. A diferencia de [method draw_polygon], se debe especificar un único " "color para todo el polígono.\n" "[b]Nota:[/b] Si redibujas frecuentemente el mismo polígono con un gran número " "de vértices, considera precalcular la triangulación con [method " "Geometry2D.triangulate_polygon] y usar [method draw_mesh], [method " "draw_multimesh] o [method RenderingServer.canvas_item_add_triangle_array].\n" "[b]Nota:[/b] Las cajas de estilo, texturas y mallas almacenadas solo dentro " "de variables locales [b]no[/b] deben usarse con este método en GDScript, " "porque la operación de dibujo no comienza inmediatamente una vez que se llama " "a este método. En GDScript, cuando la función con las variables locales " "termina, las variables locales se destruyen antes de que tenga lugar el " "renderizado." msgid "" "Draws a dashed line from a 2D point to another, with a given color and width. " "The [param from] and [param to] positions are defined in local space. See " "also [method draw_line], [method draw_multiline], and [method " "draw_polyline].\n" "If [param width] is negative, then a two-point primitives will be drawn " "instead of a four-point ones. This means that when the CanvasItem is scaled, " "the line parts will remain thin. If this behavior is not desired, then pass a " "positive [param width] like [code]1.0[/code].\n" "[param dash] is the length of each dash in pixels, with the gap between each " "dash being the same length. If [param aligned] is [code]true[/code], the " "length of the first and last dashes may be shortened or lengthened to allow " "the line to begin and end at the precise points defined by [param from] and " "[param to]. Both ends are always symmetrical when [param aligned] is " "[code]true[/code]. If [param aligned] is [code]false[/code], all dashes will " "have the same length, but the line may appear incomplete at the end due to " "the dash length not dividing evenly into the line length. Only full dashes " "are drawn when [param aligned] is [code]false[/code].\n" "If [param antialiased] is [code]true[/code], half transparent \"feathers\" " "will be attached to the boundary, making outlines smooth.\n" "[b]Note:[/b] [param antialiased] is only effective if [param width] is " "greater than [code]0.0[/code]." msgstr "" "Dibuja una línea discontinua desde un punto 2D hasta otro, con un color y " "ancho dados. Las posiciones [param from] y [param to] se definen en el " "espacio local. Véase también [method draw_line], [method draw_multiline] y " "[method draw_polyline].\n" "Si [param width] es negativo, se dibujarán primitivas de dos puntos en lugar " "de cuatro. Esto significa que cuando el CanvasItem se escale, las partes de " "la línea permanecerán delgadas. Si no se desea este comportamiento, pasa un " "[param width] positivo como [code]1.0[/code].\n" "[param dash] es la longitud de cada guion en píxeles, siendo la brecha entre " "cada guion de la misma longitud. Si [param aligned] es [code]true[/code], la " "longitud del primer y último guion puede acortarse o alargarse para permitir " "que la línea comience y termine en los puntos precisos definidos por [param " "from] y [param to]. Ambos extremos son siempre simétricos cuando [param " "aligned] es [code]true[/code]. Si [param aligned] es [code]false[/code], " "todos los guiones tendrán la misma longitud, pero la línea puede parecer " "incompleta al final debido a que la longitud del guion no divide " "uniformemente la longitud de la línea. Solo se dibujan guiones completos " "cuando [param aligned] es [code]false[/code].\n" "Si [param antialiased] es [code]true[/code], se adjuntarán \"plumas\" " "semitransparentes al límite, haciendo que los contornos sean suaves.\n" "[b]Nota:[/b] [param antialiased] solo es efectivo si [param width] es mayor " "que [code]0.0[/code]." msgid "" "Draws an ellipse with semi-major axis [param major] and semi-minor axis " "[param minor]. See also [method draw_circle], [method draw_ellipse_arc], " "[method draw_polyline], and [method draw_polygon].\n" "If [param filled] is [code]true[/code], the ellipse will be filled with the " "[param color] specified. If [param filled] is [code]false[/code], the ellipse " "will be drawn as a stroke with the [param color] and [param width] " "specified.\n" "If [param width] is negative, then two-point primitives will be drawn instead " "of four-point ones. This means that when the CanvasItem is scaled, the lines " "will remain thin. If this behavior is not desired, then pass a positive " "[param width] like [code]1.0[/code].\n" "If [param antialiased] is [code]true[/code], half transparent \"feathers\" " "will be attached to the boundary, making outlines smooth.\n" "[b]Note:[/b] [param width] is only effective if [param filled] is " "[code]false[/code]." msgstr "" "Dibuja una elipse con semieje mayor [param major] y semieje menor [param " "minor]. Véase también [method draw_circle], [method draw_ellipse_arc], " "[method draw_polyline] y [method draw_polygon].\n" "Si [param filled] es [code]true[/code], la elipse se rellenará con el [param " "color] especificado. Si [param filled] es [code]false[/code], la elipse se " "dibujará como un trazo con el [param color] y [param width] especificados.\n" "Si [param width] es negativo, se dibujarán primitivas de dos puntos en lugar " "de cuatro. Esto significa que cuando el CanvasItem se escale, las líneas " "permanecerán delgadas. Si no se desea este comportamiento, pasa un [param " "width] positivo como [code]1.0[/code].\n" "Si [param antialiased] es [code]true[/code], se adjuntarán \"plumas\" " "semitransparentes al límite, haciendo que los contornos sean suaves.\n" "[b]Nota:[/b] [param width] solo es efectivo si [param filled] es [code]false[/" "code]." msgid "" "Draws an unfilled elliptical arc between the given angles with a uniform " "[param color] and [param width] and optional antialiasing (supported only for " "positive [param width]). The larger the value of [param point_count], the " "smoother the curve. For circular arcs, see [method draw_arc]. See also " "[method draw_ellipse].\n" "If [param width] is negative, it will be ignored and the arc will be drawn " "using [constant RenderingServer.PRIMITIVE_LINE_STRIP]. This means that when " "the CanvasItem is scaled, the arc will remain thin. If this behavior is not " "desired, then pass a positive [param width] like [code]1.0[/code].\n" "The arc is drawn from [param start_angle] towards the value of [param " "end_angle] so in clockwise direction if [code]start_angle < end_angle[/code] " "and counter-clockwise otherwise. Passing the same angles but in reversed " "order will produce the same arc. If absolute difference of [param " "start_angle] and [param end_angle] is greater than [constant @GDScript.TAU] " "radians, then a full ellipse is drawn (i.e. arc will not overlap itself)." msgstr "" "Dibuja un arco elíptico sin relleno entre los ángulos dados con un [param " "color] y [param width] uniformes y antialiasing opcional (soportado solo para " "[param width] positivo). Cuanto mayor sea el valor de [param point_count], " "más suave será la curva. Para arcos circulares, consulta [method draw_arc]. " "Véase también [method draw_ellipse].\n" "Si [param width] es negativo, se ignorará y el arco se dibujará usando " "[constant RenderingServer.PRIMITIVE_LINE_STRIP]. Esto significa que cuando el " "CanvasItem se escale, el arco permanecerá delgado. Si no se desea este " "comportamiento, pasa un [param width] positivo como [code]1.0[/code].\n" "El arco se dibuja desde [param start_angle] hacia el valor de [param " "end_angle], por lo tanto en sentido horario si [code]start_angle < end_angle[/" "code] y en sentido antihorario en caso contrario. Pasar los mismos ángulos " "pero en orden inverso producirá el mismo arco. Si la diferencia absoluta " "entre [param start_angle] y [param end_angle] es mayor que [constant " "@GDScript.TAU] radianes, entonces se dibuja una elipse completa (es decir, el " "arco no se superpondrá a sí mismo)." msgid "" "After submitting all animations slices via [method draw_animation_slice], " "this function can be used to revert drawing to its default state (all " "subsequent drawing commands will be visible). If you don't care about this " "particular use case, usage of this function after submitting the slices is " "not required." msgstr "" "Después de enviar todas las secciones de animación mediante [method " "draw_animation_slice], esta función se puede usar para revertir el dibujo a " "su estado predeterminado (todos los comandos de dibujo posteriores serán " "visibles). Si no le interesa este caso de uso en particular, no es necesario " "usar esta función después de enviar las secciones." msgid "" "Draws a textured rectangle region of the font texture with LCD subpixel anti-" "aliasing at a given position, optionally modulated by a color. The [param " "rect] is defined in local space.\n" "Texture is drawn using the following blend operation, blend mode of the " "[CanvasItemMaterial] is ignored:\n" "[codeblock]\n" "dst.r = texture.r * modulate.r * modulate.a + dst.r * (1.0 - texture.r * " "modulate.a);\n" "dst.g = texture.g * modulate.g * modulate.a + dst.g * (1.0 - texture.g * " "modulate.a);\n" "dst.b = texture.b * modulate.b * modulate.a + dst.b * (1.0 - texture.b * " "modulate.a);\n" "dst.a = modulate.a + dst.a * (1.0 - modulate.a);\n" "[/codeblock]\n" "[b]Note:[/b] Styleboxes, textures, and meshes stored only inside local " "variables should [b]not[/b] be used with this method in GDScript, because the " "drawing operation doesn't begin immediately once this method is called. In " "GDScript, when the function with the local variables ends, the local " "variables get destroyed before the rendering takes place." msgstr "" "Dibuja una región rectangular texturizada de la textura de la fuente con " "suavizado de subpíxeles LCD en una posición determinada, opcionalmente " "modulada por un color. El parámetro `rect` se define en el espacio local.\n" "La textura se dibuja mediante la siguiente operación de fusión; se ignora el " "modo de fusión del `CanvasItemMaterial`:\n" "[codeblock]\n" "dst.r = texture.r * modulate.r * modulate.a + dst.r * (1.0 - texture.r * " "modulate.a);\n" "dst.g = texture.g * modulate.g * modulate.a + dst.g * (1.0 - texture.g * " "modulate.a);\n" "dst.b = texture.b * modulate.b * modulate.a + dst.b * (1.0 - texture.b * " "modulate.a);\n" "dst.a = modulate.a + dst.a * (1.0 - modulate.a);\n" "[/codeblock]\n" "[b]Nota:[/b] Las cajas de estilo, texturas y mallas almacenadas únicamente en " "variables locales [b]no[/b] deben usarse con este método en GDScript, ya que " "la operación de dibujo no comienza inmediatamente al llamar a este método. En " "GDScript, cuando finaliza la función con las variables locales, estas se " "destruyen antes de que se produzca el renderizado." msgid "" "Draws a line from a 2D point to another, with a given color and width. It can " "be optionally antialiased. The [param from] and [param to] positions are " "defined in local space. See also [method draw_dashed_line], [method " "draw_multiline], and [method draw_polyline].\n" "If [param width] is negative, then a two-point primitive will be drawn " "instead of a four-point one. This means that when the CanvasItem is scaled, " "the line will remain thin. If this behavior is not desired, then pass a " "positive [param width] like [code]1.0[/code]." msgstr "" "Dibuja una línea desde un punto 2D hasta otro, con un color y ancho dados. " "Puede ser opcionalmente antialiasada. Las posiciones [param from] y [param " "to] se definen en el espacio local. Véase también [method draw_dashed_line], " "[method draw_multiline] y [method draw_polyline].\n" "Si [param width] es negativo, se dibujará una primitiva de dos puntos en " "lugar de una de cuatro. Esto significa que cuando el CanvasItem se escale, la " "línea permanecerá delgada. Si no se desea este comportamiento, pasa un [param " "width] positivo como [code]1.0[/code]." msgid "" "Draws a [Mesh] in 2D, using the provided texture. See [MeshInstance2D] for " "related documentation. The [param transform] is defined in local space.\n" "[b]Note:[/b] Styleboxes, textures, and meshes stored only inside local " "variables should [b]not[/b] be used with this method in GDScript, because the " "drawing operation doesn't begin immediately once this method is called. In " "GDScript, when the function with the local variables ends, the local " "variables get destroyed before the rendering takes place." msgstr "" "Dibuja una [Mesh] en 2D, utilizando la textura proporcionada. Véase " "[MeshInstance2D] para obtener documentación relacionada. El [param transform] " "se define en el espacio local.\n" "[b]Nota:[/b] Las cajas de estilo, texturas y mallas almacenadas únicamente en " "variables locales no deben [b]utilizarse[/b] con este método en GDScript, ya " "que la operación de dibujo no comienza inmediatamente después de llamar a " "este método. En GDScript, cuando finaliza la función con las variables " "locales, estas se destruyen antes de que se produzca el renderizado." msgid "" "Draws a textured rectangle region of the multichannel signed distance field " "texture at a given position, optionally modulated by a color. The [param " "rect] is defined in local space. See [member " "FontFile.multichannel_signed_distance_field] for more information and caveats " "about MSDF font rendering.\n" "If [param outline] is positive, each alpha channel value of pixel in region " "is set to maximum value of true distance in the [param outline] radius.\n" "Value of the [param pixel_range] should the same that was used during " "distance field texture generation.\n" "[b]Note:[/b] Styleboxes, textures, and meshes stored only inside local " "variables should [b]not[/b] be used with this method in GDScript, because the " "drawing operation doesn't begin immediately once this method is called. In " "GDScript, when the function with the local variables ends, the local " "variables get destroyed before the rendering takes place." msgstr "" "Dibuja una región rectangular texturizada de la textura de campo de distancia " "con signo multicanal (MSDF) en una posición dada, opcionalmente modulada por " "un color. El [param rect] está definido en el espacio local. Véase [member " "FontFile.multichannel_signed_distance_field] para obtener más información y " "advertencias sobre el renderizado de fuentes MSDF.\n" "Si [param outline] es positivo, cada valor del canal alfa del píxel en la " "región se establece al valor máximo de la distancia real en el radio de " "[param outline].\n" "El valor de [param pixel_range] debe ser el mismo que se utilizó durante la " "generación de la textura del campo de distancia.\n" "[b]Nota:[/b] Los Styleboxes, texturas y mallas almacenados solo dentro de " "variables locales [b]no[/b] deben usarse con este método en GDScript, porque " "la operación de dibujo no comienza inmediatamente una vez que se llama a este " "método. En GDScript, cuando la función con las variables locales termina, las " "variables locales se destruyen antes de que se produzca el renderizado." msgid "" "Draws multiple disconnected lines with a uniform [param width] and [param " "color]. Each line is defined by two consecutive points from [param points] " "array in local space, i.e. i-th segment consists of [code]points[2 * i][/" "code], [code]points[2 * i + 1][/code] endpoints. When drawing large amounts " "of lines, this is faster than using individual [method draw_line] calls. To " "draw interconnected lines, use [method draw_polyline] instead.\n" "If [param width] is negative, then two-point primitives will be drawn instead " "of a four-point ones. This means that when the CanvasItem is scaled, the " "lines will remain thin. If this behavior is not desired, then pass a positive " "[param width] like [code]1.0[/code].\n" "[b]Note:[/b] [param antialiased] is only effective if [param width] is " "greater than [code]0.0[/code]." msgstr "" "Dibuja múltiples líneas desconectadas con un [param width] y [param color] " "uniformes. Cada línea se define por dos puntos consecutivos del array [param " "points] en el espacio local, es decir, el segmento i-ésimo consiste en los " "puntos finales [code]points[2 * i][/code] y [code]points[2 * i + 1][/code]. " "Al dibujar grandes cantidades de líneas, esto es más rápido que usar llamadas " "individuales a [method draw_line]. Para dibujar líneas interconectadas, usa " "[method draw_polyline] en su lugar.\n" "Si [param width] es negativo, se dibujarán primitivas de dos puntos en lugar " "de cuatro. Esto significa que cuando el CanvasItem se escale, las líneas " "permanecerán delgadas. Si no se desea este comportamiento, pasa un [param " "width] positivo como [code]1.0[/code].\n" "[b]Nota:[/b] [param antialiased] solo es efectivo si [param width] es mayor " "que [code]0.0[/code]." msgid "" "Draws multiple disconnected lines with a uniform [param width] and segment-by-" "segment coloring. Each segment is defined by two consecutive points from " "[param points] array in local space and a corresponding color from [param " "colors] array, i.e. i-th segment consists of [code]points[2 * i][/code], " "[code]points[2 * i + 1][/code] endpoints and has [code]colors[i][/code] " "color. When drawing large amounts of lines, this is faster than using " "individual [method draw_line] calls. To draw interconnected lines, use " "[method draw_polyline_colors] instead.\n" "If [param width] is negative, then two-point primitives will be drawn instead " "of a four-point ones. This means that when the CanvasItem is scaled, the " "lines will remain thin. If this behavior is not desired, then pass a positive " "[param width] like [code]1.0[/code].\n" "[b]Note:[/b] [param antialiased] is only effective if [param width] is " "greater than [code]0.0[/code]." msgstr "" "Dibuja múltiples líneas desconectadas con un [param width] uniforme y " "coloración segmento por segmento. Cada segmento se define por dos puntos " "consecutivos del array [param points] en el espacio local y un color " "correspondiente del array [param colors], es decir, el segmento i-ésimo " "consiste en los puntos finales [code]points[2 * i][/code] y [code]points[2 * " "i + 1][/code] y tiene el color [code]colors[i][/code]. Al dibujar grandes " "cantidades de líneas, esto es más rápido que usar llamadas individuales a " "[method draw_line]. Para dibujar líneas interconectadas, usa [method " "draw_polyline_colors] en su lugar.\n" "Si [param width] es negativo, se dibujarán primitivas de dos puntos en lugar " "de cuatro. Esto significa que cuando el CanvasItem se escale, las líneas " "permanecerán delgadas. Si no se desea este comportamiento, pasa un [param " "width] positivo como [code]1.0[/code].\n" "[b]Nota:[/b] [param antialiased] solo es efectivo si [param width] es mayor " "que [code]0.0[/code]." msgid "" "Draws a [MultiMesh] in 2D with the provided texture. See " "[MultiMeshInstance2D] for related documentation.\n" "[b]Note:[/b] Styleboxes, textures, and meshes stored only inside local " "variables should [b]not[/b] be used with this method in GDScript, because the " "drawing operation doesn't begin immediately once this method is called. In " "GDScript, when the function with the local variables ends, the local " "variables get destroyed before the rendering takes place." msgstr "" "Dibuja una [MultiMesh] en 2D con la textura proporcionada. Véase " "[MultiMeshInstance2D] para documentación relacionada.\n" "[b]Nota:[/b] Las cajas de estilo, texturas y mallas almacenadas solo en " "variables locales [b]no[/b] deben usarse con este método en GDScript, ya que " "la operación de dibujo no comienza inmediatamente después de llamar a este " "método. En GDScript, cuando finaliza la funcion con las variables locales, " "estas se destruyen antes de que se produzca el renderizado." msgid "" "Draws a solid polygon of any number of points, convex or concave. Unlike " "[method draw_colored_polygon], each point's color can be changed " "individually. The [param points] array is defined in local space. See also " "[method draw_polyline] and [method draw_polyline_colors]. If you need more " "flexibility (such as being able to use bones), use [method " "RenderingServer.canvas_item_add_triangle_array] instead.\n" "[b]Note:[/b] If you frequently redraw the same polygon with a large number of " "vertices, consider pre-calculating the triangulation with [method " "Geometry2D.triangulate_polygon] and using [method draw_mesh], [method " "draw_multimesh], or [method RenderingServer.canvas_item_add_triangle_array].\n" "[b]Note:[/b] Styleboxes, textures, and meshes stored only inside local " "variables should [b]not[/b] be used with this method in GDScript, because the " "drawing operation doesn't begin immediately once this method is called. In " "GDScript, when the function with the local variables ends, the local " "variables get destroyed before the rendering takes place." msgstr "" "Dibuja un polígono sólido de cualquier número de puntos, convexo o cóncavo. A " "diferencia de [method draw_colored_polygon], el color de cada punto puede " "cambiarse individualmente. El array [param points] se define en el espacio " "local. Véase también [method draw_polyline] y [method draw_polyline_colors]. " "Si necesitas más flexibilidad (como poder usar huesos), usa [method " "RenderingServer.canvas_item_add_triangle_array] en su lugar.\n" "[b]Nota:[/b] Si redibujas frecuentemente el mismo polígono con un gran número " "de vértices, considera precalcular la triangulación con [method " "Geometry2D.triangulate_polygon] y usar [method draw_mesh], [method " "draw_multimesh] o [method RenderingServer.canvas_item_add_triangle_array].\n" "[b]Nota:[/b] Las cajas de estilo, texturas y mallas almacenadas solo dentro " "de variables locales [b]no[/b] deben usarse con este método en GDScript, " "porque la operación de dibujo no comienza inmediatamente una vez que se llama " "a este método. En GDScript, cuando la función con las variables locales " "termina, las variables locales se destruyen antes de que tenga lugar el " "renderizado." msgid "" "Draws interconnected line segments with a uniform [param color] and [param " "width] and optional antialiasing (supported only for positive [param width]). " "The [param points] array is defined in local space. When drawing large " "amounts of lines, this is faster than using individual [method draw_line] " "calls. To draw disconnected lines, use [method draw_multiline] instead. See " "also [method draw_polygon].\n" "If [param width] is negative, it will be ignored and the polyline will be " "drawn using [constant RenderingServer.PRIMITIVE_LINE_STRIP]. This means that " "when the CanvasItem is scaled, the polyline will remain thin. If this " "behavior is not desired, then pass a positive [param width] like [code]1.0[/" "code]." msgstr "" "Dibuja segmentos de línea interconectados con un [param color] y [param " "width] uniformes y antialiasing opcional (soportado solo para [param width] " "positivo). El array [param points] se define en el espacio local. Al dibujar " "grandes cantidades de líneas, esto es más rápido que usar llamadas " "individuales a [method draw_line]. Para dibujar líneas desconectadas, usa " "[method draw_multiline] en su lugar. Véase también [method draw_polygon].\n" "Si [param width] es negativo, se ignorará y la polilínea se dibujará usando " "[constant RenderingServer.PRIMITIVE_LINE_STRIP]. Esto significa que cuando el " "CanvasItem se escale, la polilínea permanecerá delgada. Si no se desea este " "comportamiento, pasa un [param width] positivo como [code]1.0[/code]." msgid "" "Draws interconnected line segments with a uniform [param width], point-by-" "point coloring, and optional antialiasing (supported only for positive [param " "width]). Colors assigned to line points match by index between [param points] " "and [param colors], i.e. each line segment is filled with a gradient between " "the colors of the endpoints. The [param points] array is defined in local " "space. When drawing large amounts of lines, this is faster than using " "individual [method draw_line] calls. To draw disconnected lines, use [method " "draw_multiline_colors] instead. See also [method draw_polygon].\n" "If [param width] is negative, it will be ignored and the polyline will be " "drawn using [constant RenderingServer.PRIMITIVE_LINE_STRIP]. This means that " "when the CanvasItem is scaled, the polyline will remain thin. If this " "behavior is not desired, then pass a positive [param width] like [code]1.0[/" "code]." msgstr "" "Dibuja segmentos de línea interconectados con un [param width] uniforme, " "coloración punto por punto y antialiasing opcional (soportado solo para " "[param width] positivo). Los colores asignados a los puntos de la línea " "coinciden por índice entre [param points] y [param colors], es decir, cada " "segmento de línea se rellena con un degradado entre los colores de los puntos " "finales. El array [param points] se define en el espacio local. Al dibujar " "grandes cantidades de líneas, esto es más rápido que usar llamadas " "individuales a [method draw_line]. Para dibujar líneas desconectadas, usa " "[method draw_multiline_colors] en su lugar. Véase también [method " "draw_polygon].\n" "Si [param width] es negativo, se ignorará y la polilínea se dibujará usando " "[constant RenderingServer.PRIMITIVE_LINE_STRIP]. Esto significa que cuando el " "CanvasItem se escale, la polilínea permanecerá delgada. Si no se desea este " "comportamiento, pasa un [param width] positivo como [code]1.0[/code]." msgid "" "Draws a rectangle. If [param filled] is [code]true[/code], the rectangle will " "be filled with the [param color] specified. If [param filled] is [code]false[/" "code], the rectangle will be drawn as a stroke with the [param color] and " "[param width] specified. The [param rect] is specified in local space. See " "also [method draw_texture_rect].\n" "If [param width] is negative, then two-point primitives will be drawn instead " "of a four-point ones. This means that when the CanvasItem is scaled, the " "lines will remain thin. If this behavior is not desired, then pass a positive " "[param width] like [code]1.0[/code].\n" "If [param antialiased] is [code]true[/code], half transparent \"feathers\" " "will be attached to the boundary, making outlines smooth.\n" "[b]Note:[/b] [param width] is only effective if [param filled] is " "[code]false[/code].\n" "[b]Note:[/b] Unfilled rectangles drawn with a negative [param width] may not " "display perfectly. For example, corners may be missing or brighter due to " "overlapping lines (for a translucent [param color])." msgstr "" "Dibuja un rectángulo. Si [param filled] es [code]true[/code], el rectángulo " "se rellenará con el [param color] especificado. Si [param filled] es " "[code]false[/code], el rectángulo se dibujará como un trazo con el [param " "color] y [param width] especificados. El [param rect] se especifica en el " "espacio local. Véase también [method draw_texture_rect].\n" "Si [param width] es negativo, se dibujarán primitivas de dos puntos en lugar " "de cuatro. Esto significa que cuando el CanvasItem se escale, las líneas " "permanecerán delgadas. Si no se desea este comportamiento, pasa un [param " "width] positivo como [code]1.0[/code].\n" "Si [param antialiased] es [code]true[/code], se adjuntarán \"plumas\" " "semitransparentes al límite, haciendo que los contornos sean suaves.\n" "[b]Nota:[/b] [param width] solo es efectivo si [param filled] es [code]false[/" "code].\n" "[b]Nota:[/b] Los rectángulos sin relleno dibujados con un [param width] " "negativo pueden no mostrarse perfectamente. Por ejemplo, las esquinas pueden " "faltar o ser más brillantes debido a la superposición de líneas (para un " "[param color] translúcido)." msgid "" "Sets a custom local transform for drawing via components. Anything drawn " "afterwards will be transformed by this.\n" "[b]Note:[/b] [member FontFile.oversampling] does [i]not[/i] take [param " "scale] into account. This means that scaling up/down will cause bitmap fonts " "and rasterized (non-MSDF) dynamic fonts to appear blurry or pixelated. To " "ensure text remains crisp regardless of scale, you can enable MSDF font " "rendering by enabling [member ProjectSettings.gui/theme/" "default_font_multichannel_signed_distance_field] (applies to the default " "project font only), or enabling [b]Multichannel Signed Distance Field[/b] in " "the import options of a DynamicFont for custom fonts. On system fonts, " "[member SystemFont.multichannel_signed_distance_field] can be enabled in the " "inspector." msgstr "" "Establece una transformación local personalizada para dibujar mediante " "componentes. Cualquier cosa dibujada después será transformada por esto.\n" "[b]Nota:[/b] [member FontFile.oversampling] [i]no[/i] tiene en cuenta [param " "scale]. Esto significa que escalar hacia arriba o hacia abajo hará que las " "fuentes de mapa de bits y las fuentes dinámicas rasterizadas (no MSDF) " "aparezcan borrosas o pixeladas. Para asegurar que el texto permanezca nítido " "independientemente de la escala, puedes habilitar el renderizado de fuentes " "MSDF activando [member ProjectSettings.gui/theme/" "default_font_multichannel_signed_distance_field] (se aplica solo a la fuente " "predeterminada del proyecto), o habilitando [b]Campo de Distancia Firmado " "Multicanal[/b] en las opciones de importación de una DynamicFont para fuentes " "personalizadas. En las fuentes del sistema, se puede habilitar [member " "SystemFont.multichannel_signed_distance_field] en el inspector." msgid "" "Draws [param text] using the specified [param font] at the [param pos] in " "local space (bottom-left corner using the baseline of the font). The text " "will have its color multiplied by [param modulate]. If [param width] is " "greater than or equal to 0, the text will be clipped if it exceeds the " "specified width. If [param oversampling] is greater than zero, it is used as " "font oversampling factor, otherwise viewport oversampling settings are used.\n" "[b]Example:[/b] Draw \"Hello world\", using the project's default font:\n" "[codeblocks]\n" "[gdscript]\n" "draw_string(ThemeDB.fallback_font, Vector2(64, 64), \"Hello world\", " "HORIZONTAL_ALIGNMENT_LEFT, -1, ThemeDB.fallback_font_size)\n" "[/gdscript]\n" "[csharp]\n" "DrawString(ThemeDB.FallbackFont, new Vector2(64, 64), \"Hello world\", " "HorizontalAlignment.Left, -1, ThemeDB.FallbackFontSize);\n" "[/csharp]\n" "[/codeblocks]\n" "See also [method Font.draw_string]." msgstr "" "Dibuja [param text] usando la [param font] especificada en la posición [param " "pos] en el espacio local (esquina inferior izquierda usando la línea base de " "la fuente). El texto tendrá su color multiplicado por [param modulate]. Si " "[param width] es mayor o igual a 0, el texto se recortará si excede el ancho " "especificado. Si [param oversampling] es mayor que cero, se usa como factor " "de sobremuestreo de la fuente; de lo contrario, se usan las configuraciones " "de sobremuestreo del viewport.\n" "[b]Ejemplo:[/b] Dibuja \"Hello world\" usando la fuente predeterminada del " "proyecto:\n" "[codeblocks]\n" "[gdscript]\n" "draw_string(ThemeDB.fallback_font, Vector2(64, 64), \"Hello world\", " "HORIZONTAL_ALIGNMENT_LEFT, -1, ThemeDB.fallback_font_size)\n" "[/gdscript]\n" "[csharp]\n" "DrawString(ThemeDB.FallbackFont, new Vector2(64, 64), \"Hello world\", " "HorizontalAlignment.Left, -1, ThemeDB.FallbackFontSize);\n" "[/csharp]\n" "[/codeblocks]\n" "Véase también [method Font.draw_string]." msgid "" "Draws a styled rectangle. The [param rect] is defined in local space.\n" "[b]Note:[/b] Styleboxes, textures, and meshes stored only inside local " "variables should [b]not[/b] be used with this method in GDScript, because the " "drawing operation doesn't begin immediately once this method is called. In " "GDScript, when the function with the local variables ends, the local " "variables get destroyed before the rendering takes place." msgstr "" "Dibuja un rectángulo con estilo. El [param rect] se define en espacio local.\n" "[b]Nota:[/b] Los Stylebox, texturas y mallas almacenados solo dentro de " "variables locales no [b]deben[/b] utilizarse con este método en GDScript, ya " "que la operación de dibujo no comienza inmediatamente una vez que este método " "es llamado. En GDScript, cuando la función que contiene las variables locales " "termina, las variables locales se destruyen antes de que ocurra el " "renderizado." msgid "" "Draws a texture at a given position. The [param position] is defined in local " "space.\n" "[b]Note:[/b] Styleboxes, textures, and meshes stored only inside local " "variables should [b]not[/b] be used with this method in GDScript, because the " "drawing operation doesn't begin immediately once this method is called. In " "GDScript, when the function with the local variables ends, the local " "variables get destroyed before the rendering takes place." msgstr "" "Dibuja una textura en una posición dada. El [param position] se define en " "espacio local.\n" "[b]Nota:[/b] Los Stylebox, texturas y mallas almacenados solo dentro de " "variables locales no [b]deben[/b] utilizarse con este método en GDScript, ya " "que la operación de dibujo no comienza inmediatamente una vez que este método " "es llamado. En GDScript, cuando la función que contiene las variables locales " "termina, las variables locales se destruyen antes de que ocurra el " "renderizado." msgid "" "Draws a textured rectangle at a given position, optionally modulated by a " "color. The [param rect] is defined in local space. If [param transpose] is " "[code]true[/code], the texture will have its X and Y coordinates swapped. See " "also [method draw_rect] and [method draw_texture_rect_region].\n" "[b]Note:[/b] Styleboxes, textures, and meshes stored only inside local " "variables should [b]not[/b] be used with this method in GDScript, because the " "drawing operation doesn't begin immediately once this method is called. In " "GDScript, when the function with the local variables ends, the local " "variables get destroyed before the rendering takes place." msgstr "" "Dibuja un rectángulo texturizado en una posición dada, opcionalmente modulado " "por un color. El [param rect] se define en el espacio local. Si [param " "transpose] es [code]true[/code], la textura tendrá sus coordenadas X e Y " "intercambiadas. Véase también [method draw_rect] y [method " "draw_texture_rect_region].\n" "[b]Nota:[/b] Las cajas de estilo, texturas y mallas almacenadas solo dentro " "de variables locales [b]no[/b] deben usarse con este método en GDScript, " "porque la operación de dibujo no comienza inmediatamente una vez que se llama " "a este método. En GDScript, cuando la función con las variables locales " "termina, las variables locales se destruyen antes de que tenga lugar el " "renderizado." msgid "" "Draws a textured rectangle from a texture's region (specified by [param " "src_rect]) at a given position in local space, optionally modulated by a " "color. If [param transpose] is [code]true[/code], the texture will have its X " "and Y coordinates swapped. See also [method draw_texture_rect].\n" "[b]Note:[/b] Styleboxes, textures, and meshes stored only inside local " "variables should [b]not[/b] be used with this method in GDScript, because the " "drawing operation doesn't begin immediately once this method is called. In " "GDScript, when the function with the local variables ends, the local " "variables get destroyed before the rendering takes place." msgstr "" "Dibuja un rectángulo texturizado desde una región de la textura (especificada " "por [param src_rect]) en una posición dada en el espacio local, opcionalmente " "modulado por un color. Si [param transpose] es [code]true[/code], la textura " "tendrá sus coordenadas X e Y intercambiadas. Véase también [method " "draw_texture_rect].\n" "[b]Nota:[/b] Las cajas de estilo, texturas y mallas almacenadas solo dentro " "de variables locales [b]no[/b] deben usarse con este método en GDScript, " "porque la operación de dibujo no comienza inmediatamente una vez que se llama " "a este método. En GDScript, cuando la función con las variables locales " "termina, las variables locales se destruyen antes de que tenga lugar el " "renderizado." msgid "" "Forces the node's transform to update. Fails if the node is not inside the " "tree. See also [method get_transform].\n" "[b]Note:[/b] For performance reasons, transform changes are usually " "accumulated and applied [i]once[/i] at the end of the frame. The update " "propagates through [CanvasItem] children, as well. Therefore, use this method " "only when you need an up-to-date transform (such as during physics " "operations)." msgstr "" "Forza la actualización de la transformación del nodo. Falla si el nodo no " "está dentro del árbol. Consulte también [method get_transform].\n" "[b]Nota:[/b] Por razones de rendimiento, los cambios de transformación suelen " "acumularse y aplicarse una sola vez [i]una vez[/i] al final del frame. La " "actualización se propaga a través de los hijos [CanvasItem], además. Por lo " "tanto, utilice este método solo cuando necesite una transformación " "actualizada (como durante las operaciones de físicas)." msgid "" "Returns the internal canvas item [RID] used by the [RenderingServer] for this " "node." msgstr "" "Devuelve el [RID] interno del item del canvas utilizado por el " "[RenderingServer] para este nodo." msgid "" "Returns the [CanvasLayer] that contains this node, or [code]null[/code] if " "the node is not in any [CanvasLayer]." msgstr "" "Devuelve la [CanvasLayer] que contiene este nodo, o [code]null[/code] si el " "nodo no está en ninguna [CanvasLayer]." msgid "" "Returns the transform of this node, converted from its registered canvas's " "coordinate system to its viewport's coordinate system. See also [method " "Node.get_viewport]." msgstr "" "Devuelve la transformación de este nodo, convertida del sistema de " "coordenadas de su canvas registrado al sistema de coordenadas de su viewport. " "Véase también [method Node.get_viewport]." msgid "" "Returns mouse cursor's global position relative to the [CanvasLayer] that " "contains this node.\n" "[b]Note:[/b] For screen-space coordinates (e.g. when using a non-embedded " "[Popup]), you can use [method DisplayServer.mouse_get_position]." msgstr "" "Devuelve la posición global del cursor del ratón relativa a la [CanvasLayer] " "que contiene este nodo.\n" "[b]Nota:[/b] Para coordenadas de espacio de pantalla (por ejemplo, al usar un " "[Popup] no incrustado), puedes usar [method DisplayServer.mouse_get_position]." msgid "" "Returns the global transform matrix of this item, i.e. the combined transform " "up to the topmost [CanvasItem] node. The topmost item is a [CanvasItem] that " "either has no parent, has non-[CanvasItem] parent or it has [member " "top_level] enabled." msgstr "" "Devuelve la matriz de transformación global de este elemento, es decir, la " "transformación combinada hasta el nodo [CanvasItem] más superior. El elemento " "más superior es un [CanvasItem] que no tiene padre, tiene un padre que no es " "un [CanvasItem] o tiene [member top_level] activado." msgid "" "Returns the transform from the local coordinate system of this [CanvasItem] " "to the [Viewport]s coordinate system." msgstr "" "Devuelve la transformación del sistema de coordenadas local de este " "[CanvasItem] al sistema de coordenadas del [Viewport]." msgid "Get the value of a shader parameter as set on this instance." msgstr "" "Obtiene el valor de un parámetro de shader como se establece en esta " "instancia." msgid "" "Returns the mouse's position in this [CanvasItem] using the local coordinate " "system of this [CanvasItem]." msgstr "" "Devuelve la posición del ratón en este [CanvasItem] utilizando el sistema de " "coordenadas local de este [CanvasItem]." msgid "" "Returns the transform of this [CanvasItem] in global screen coordinates (i.e. " "taking window position into account). Mostly useful for editor plugins.\n" "Equivalent to [method get_global_transform_with_canvas] if the window is " "embedded (see [member Viewport.gui_embed_subwindows])." msgstr "" "Devuelve la transformación de este [CanvasItem] en coordenadas globales de " "pantalla (es decir, teniendo en cuenta la posición de la ventana). " "Principalmente útil para plugins del editor.\n" "Es equivalente a [method get_global_transform_with_canvas] si la ventana está " "incrustada (ver [member Viewport.gui_embed_subwindows])." msgid "Returns the transform matrix of this [CanvasItem]." msgstr "Devuelve la matriz de transformación de este [CanvasItem]." msgid "" "Returns this node's viewport boundaries as a [Rect2]. See also [method " "Node.get_viewport]." msgstr "" "Devuelve los límites del viewport de este nodo como un [Rect2]. Ver también " "[method Node.get_viewport]." msgid "" "Returns the transform of this node, converted from its registered canvas's " "coordinate system to its viewport embedder's coordinate system. See also " "[method Viewport.get_final_transform] and [method Node.get_viewport]." msgstr "" "Devuelve la transformación de este nodo, convertida del sistema de " "coordenadas de su canvas registrado al sistema de coordenadas de su " "incrustador de viewport. Ver también [method Viewport.get_final_transform] y " "[method Node.get_viewport]." msgid "" "Returns [code]true[/code] if the layer at the given index is set in [member " "visibility_layer]." msgstr "" "Devuelve [code]true[/code] si la capa en el índice dado está establecida en " "[member visibility_layer]." msgid "" "Returns the [World2D] this node is registered to.\n" "Usually, this is the same as this node's viewport (see [method " "Node.get_viewport] and [method Viewport.find_world_2d])." msgstr "" "Devuelve el [World2D] al que está registrado este nodo.\n" "Usualmente, esto es lo mismo que el viewport de este nodo (ver [method " "Node.get_viewport] y [method Viewport.find_world_2d])." msgid "" "Hide the [CanvasItem] if it's currently visible. This is equivalent to " "setting [member visible] to [code]false[/code]." msgstr "" "Oculta el [CanvasItem] si está actualmente visible. Esto es equivalente a " "establecer [member visible] en [code]false[/code]." msgid "" "Returns [code]true[/code] if the node receives [constant " "NOTIFICATION_LOCAL_TRANSFORM_CHANGED] whenever its local transform changes. " "This is enabled with [method set_notify_local_transform]." msgstr "" "Devuelve [code]true[/code] si el nodo recibe [constant " "NOTIFICATION_LOCAL_TRANSFORM_CHANGED] cada vez que su transformación local " "cambia. Esto se activa con [method set_notify_local_transform]." msgid "" "Returns [code]true[/code] if the node receives [constant " "NOTIFICATION_TRANSFORM_CHANGED] whenever its global transform changes. This " "is enabled with [method set_notify_transform]." msgstr "" "Devuelve [code]true[/code] si el nodo recibe [constant " "NOTIFICATION_TRANSFORM_CHANGED] cada vez que su transformación global cambia. " "Esto se activa con [method set_notify_transform]." msgid "" "Returns [code]true[/code] if the node is present in the [SceneTree], its " "[member visible] property is [code]true[/code] and all its ancestors are also " "visible. If any ancestor is hidden, this node will not be visible in the " "scene tree, and is therefore not drawn (see [method _draw]).\n" "Visibility is checked only in parent nodes that inherit from [CanvasItem], " "[CanvasLayer], and [Window]. If the parent is of any other type (such as " "[Node], [AnimationPlayer], or [Node3D]), it is assumed to be visible.\n" "[b]Note:[/b] This method does not take [member visibility_layer] into " "account, so even if this method returns [code]true[/code], the node might end " "up not being rendered." msgstr "" "Devuelve [code]true[/code] si el nodo está presente en el [SceneTree], su " "propiedad [member visible] es [code]true[/code] y todos sus ancestros son " "también visibles. Si algún ancestro está oculto, este nodo no será visible en " "el árbol de escenas y, por lo tanto, no se dibujará (véase [method _draw]).\n" "La visibilidad se comprueba solo en los nodos padre que heredan de " "[CanvasItem], [CanvasLayer] y [Window]. Si el padre es de cualquier otro tipo " "(como [Node], [AnimationPlayer] o [Node3D]), se asume que es visible.\n" "[b]Nota:[/b] Este método no tiene en cuenta [member visibility_layer], por lo " "que incluso si este método devuelve [code]true[/code], el nodo podría no ser " "renderizado." msgid "" "Transforms [param viewport_point] from the viewport's coordinates to this " "node's local coordinates.\n" "For the opposite operation, use [method get_global_transform_with_canvas].\n" "[codeblock]\n" "var viewport_point = get_global_transform_with_canvas() * local_point\n" "[/codeblock]" msgstr "" "Transforma [param viewport_point] de las coordenadas de la ventana gráfica a " "las coordenadas locales de este nodo.\n" "Para la operación opuesta, usa [method get_global_transform_with_canvas].\n" "[codeblock]\n" "var viewport_point = get_global_transform_with_canvas() * local_point\n" "[/codeblock]" msgid "" "Returns a copy of the given [param event] with its coordinates converted from " "global space to this [CanvasItem]'s local space. If not possible, returns the " "same [InputEvent] unchanged." msgstr "" "Devuelve una copia del [param event] dado con sus coordenadas convertidas del " "espacio global al espacio local de este [CanvasItem]. Si no es posible, " "devuelve el mismo [InputEvent] sin cambios." msgid "" "Moves this node below its siblings, usually causing the node to draw on top " "of its siblings. Does nothing if this node does not have a parent. See also " "[method Node.move_child]." msgstr "" "Mueve este nodo debajo de sus hermanos, lo que generalmente provoca que el " "nodo se dibuje encima de ellos. No hace nada si este nodo no tiene un padre. " "Ver también [method Node.move_child]." msgid "" "Queues the [CanvasItem] to redraw. During idle time, if [CanvasItem] is " "visible, [constant NOTIFICATION_DRAW] is sent and [method _draw] is called. " "This only occurs [b]once[/b] per frame, even if this method has been called " "multiple times." msgstr "" "Pone en cola el [CanvasItem] para que se vuelva a dibujar. Durante el tiempo " "de inactividad, si el [CanvasItem] es visible, se envía [constant " "NOTIFICATION_DRAW] y se llama a [method _draw]. Esto solo ocurre [b]una vez[/" "b] por fotograma, incluso si este método se ha llamado varias veces." msgid "" "Set the value of a shader uniform for this instance only ([url=$DOCS_URL/" "tutorials/shaders/shader_reference/shading_language.html#per-instance-" "uniforms]per-instance uniform[/url]). See also [method " "ShaderMaterial.set_shader_parameter] to assign a uniform on all instances " "using the same [ShaderMaterial].\n" "[b]Note:[/b] For a shader uniform to be assignable on a per-instance basis, " "it [i]must[/i] be defined with [code]instance uniform ...[/code] rather than " "[code]uniform ...[/code] in the shader code.\n" "[b]Note:[/b] [param name] is case-sensitive and must match the name of the " "uniform in the code exactly (not the capitalized name in the inspector)." msgstr "" "Establece el valor de una variable uniforme de shader solo para esta " "instancia ([url=$DOCS_URL/tutorials/shaders/shader_reference/" "shading_language.html#per-instance-uniforms]uniform por instancia[/url]). " "Véase también [method ShaderMaterial.set_shader_parameter] para asignar una " "variable uniforme en todas las instancias que usan el mismo " "[ShaderMaterial].\n" "[b]Nota:[/b] Para que una variable uniforme de shader pueda asignarse por " "instancia, [i]debe[/i] definirse con [code]instance uniform ...[/code] en " "lugar de [code]uniform ...[/code] en el código del shader.\n" "[b]Nota:[/b] [param name] distingue entre mayúsculas y minúsculas y debe " "coincidir exactamente con el nombre de la variable uniforme en el código (no " "con el nombre en mayúsculas del inspector)." msgid "" "If [code]true[/code], the node will receive [constant " "NOTIFICATION_LOCAL_TRANSFORM_CHANGED] whenever its local transform changes.\n" "[b]Note:[/b] Many canvas items such as [Bone2D] or [CollisionShape2D] " "automatically enable this in order to function correctly." msgstr "" "Si es [code]true[/code], el nodo recibirá [constant " "NOTIFICATION_LOCAL_TRANSFORM_CHANGED] cada vez que cambie su transformación " "local.\n" "[b]Nota:[/b] Muchos elementos de canvas como [Bone2D] o [CollisionShape2D] " "habilitan esto automáticamente para funcionar correctamente." msgid "" "If [code]true[/code], the node will receive [constant " "NOTIFICATION_TRANSFORM_CHANGED] whenever its global transform changes.\n" "[b]Note:[/b] Many canvas items such as [Camera2D] or [Light2D] automatically " "enable this in order to function correctly." msgstr "" "Si es [code]true[/code], el nodo recibirá [constant " "NOTIFICATION_TRANSFORM_CHANGED] cada vez que cambie su transformación " "global.\n" "[b]Nota:[/b] Muchos elementos de canvas como [Camera2D] o [Light2D] habilitan " "esto automáticamente para funcionar correctamente." msgid "" "Set/clear individual bits on the rendering visibility layer. This simplifies " "editing this [CanvasItem]'s visibility layer." msgstr "" "Establece o borra bits individuales en la capa de visibilidad de renderizado. " "Esto simplifica la edición de la capa de visibilidad de este [CanvasItem]." msgid "" "Show the [CanvasItem] if it's currently hidden. This is equivalent to setting " "[member visible] to [code]true[/code].\n" "[b]Note:[/b] For controls that inherit [Popup], the correct way to make them " "visible is to call one of the multiple [code]popup*()[/code] functions " "instead." msgstr "" "Muestra el [CanvasItem] si está actualmente oculto. Esto es equivalente a " "establecer [member visible] en [code]true[/code].\n" "[b]Nota:[/b] Para los controles que heredan de [Popup], la forma correcta de " "hacerlos visibles es llamar a una de las múltiples funciones [code]popup*()[/" "code] en su lugar." msgid "" "The mode in which this node clips its children, acting as a mask.\n" "[b]Note:[/b] Clipping nodes cannot be nested or placed within a " "[CanvasGroup]. If an ancestor of this node clips its children or is a " "[CanvasGroup], then this node's clip mode should be set to [constant " "CLIP_CHILDREN_DISABLED] to avoid unexpected behavior." msgstr "" "El modo en que este nodo recorta a sus hijos, actuando como una máscara.\n" "[b]Nota:[/b] Los nodos de recorte no se pueden anidar ni colocar dentro de un " "[CanvasGroup]. Si un ancestro de este nodo recorta a sus hijos o es un " "[CanvasGroup], entonces el modo de recorte de este nodo debe establecerse en " "[constant CLIP_CHILDREN_DISABLED] para evitar un comportamiento inesperado." msgid "" "The rendering layers in which this [CanvasItem] responds to [Light2D] nodes." msgstr "" "Las capas de renderizado en las que este [CanvasItem] responde a los nodos " "[Light2D]." msgid "The material applied to this [CanvasItem]." msgstr "El material aplicado a este [CanvasItem]." msgid "" "The color applied to this [CanvasItem]. This property does affect child " "[CanvasItem]s, unlike [member self_modulate] which only affects the node " "itself." msgstr "" "El color aplicado a este [CanvasItem]. Esta propiedad afecta a los " "[CanvasItem] hijos, a diferencia de [member self_modulate] que solo afecta al " "nodo en sí." msgid "" "The color applied to this [CanvasItem]. This property does [b]not[/b] affect " "child [CanvasItem]s, unlike [member modulate] which affects both the node " "itself and its children.\n" "[b]Note:[/b] Internal children are also not affected by this property (see " "the [code]include_internal[/code] parameter in [method Node.add_child]). For " "built-in nodes this includes sliders in [ColorPicker], and the tab bar in " "[TabContainer]." msgstr "" "El color aplicado a este [CanvasItem]. Esta propiedad [b]no[/b] afecta a los " "[CanvasItem] hijos, a diferencia de [member modulate] que afecta tanto al " "nodo en sí como a sus hijos.\n" "[b]Nota:[/b] Los hijos internos tampoco se ven afectados por esta propiedad " "(véase el parámetro [code]include_internal[/code] en [method " "Node.add_child]). Para los nodos incorporados esto incluye los deslizadores " "en [ColorPicker], y la barra de pestañas en [TabContainer]." msgid "If [code]true[/code], this node draws behind its parent." msgstr "Si es [code]true[/code], este nodo se dibuja detrás de su padre." msgid "The filtering mode used to render this [CanvasItem]'s texture(s)." msgstr "" "El modo de filtrado utilizado para renderizar las texturas de este " "[CanvasItem]." msgid "" "The repeating mode used to render this [CanvasItem]'s texture(s). It affects " "what happens when the texture is sampled outside its extents, for example by " "setting a [member Sprite2D.region_rect] that is larger than the texture or " "assigning [Polygon2D] UV points outside the texture.\n" "[b]Note:[/b] [TextureRect] is not affected by [member texture_repeat], as it " "uses its own texture repeating implementation." msgstr "" "El modo de repetición utilizado para renderizar la(s) textura(s) de este " "[CanvasItem]. Afecta a lo que ocurre cuando la textura es muestreada fuera de " "sus límites, por ejemplo al establecer un [member Sprite2D.region_rect] que " "sea más grande que la textura o al asignar puntos UV de [Polygon2D] fuera de " "la textura.\n" "[b]Nota:[/b] [TextureRect] no se ve afectado por [member texture_repeat], ya " "que utiliza su propia implementación de repetición de textura." msgid "" "If [code]true[/code], this [CanvasItem] will [i]not[/i] inherit its transform " "from parent [CanvasItem]s. Its draw order will also be changed to make it " "draw on top of other [CanvasItem]s that do not have [member top_level] set to " "[code]true[/code]. The [CanvasItem] will effectively act as if it was placed " "as a child of a bare [Node]." msgstr "" "Si es [code]true[/code], este [CanvasItem] no [i]heredará[/i] su " "transformación de los [CanvasItem] padres. Su orden de dibujo también " "cambiará para dibujarse por encima de otros [CanvasItem]s que no tienen " "[member top_level] configurado en [code]true[/code]. El [CanvasItem] " "efectivamente actuará como si estuviera colocado como hijo de un [Node]." msgid "" "If [code]true[/code], the parent [CanvasItem]'s [member material] is used as " "this node's material." msgstr "" "Si es [code]true[/code], el [member material] del elemento [CanvasItem] padre " "se utiliza como material de este nodo." msgid "" "The rendering layer in which this [CanvasItem] is rendered by [Viewport] " "nodes. A [Viewport] will render a [CanvasItem] if it and all its parents " "share a layer with the [Viewport]'s canvas cull mask.\n" "[b]Note:[/b] A [CanvasItem] does not inherit its parents' visibility layers. " "This means that if a parent [CanvasItem] does not have all the same layers as " "its child, the child may not be visible even if both the parent and child " "have [member visible] set to [code]true[/code]. For example, if a parent has " "layer 1 and a child has layer 2, the child will not be visible in a " "[Viewport] with the canvas cull mask set to layer 1 or 2 (see [member " "Viewport.canvas_cull_mask]). To ensure that both the parent and child are " "visible, the parent must have both layers 1 and 2, or the child must have " "[member top_level] set to [code]true[/code]." msgstr "" "La capa de renderizado en la que este [CanvasItem] es dibujado por nodos " "[Viewport]. Un [Viewport] dibujará un [CanvasItem] si comparte una capa con " "su máscara de recorte del lienzo y todos sus padres comparten también esa " "capa.\n" "[b]Nota:[/b] Un [CanvasItem] no hereda las capas de visibilidad de sus " "padres. Esto significa que si un [CanvasItem] padre no tiene todas las mismas " "capas que su hijo, el hijo puede no ser visible incluso si tanto el padre " "como el hijo tienen [member visible] configurado en [code]true[/code]. Por " "ejemplo, si un padre tiene la capa 1 y un hijo tiene la capa 2, el hijo no " "será visible en un [Viewport] con la máscara de recorte del lienzo " "configurada en la capa 1 o 2 (ver [member Viewport.canvas_cull_mask]). Para " "asegurar que tanto el padre como el hijo sean visibles, el padre debe tener " "ambas capas 1 y 2, o el hijo debe tener [member top_level] configurado en " "[code]true[/code]." msgid "" "If [code]true[/code], this and child [CanvasItem] nodes with a higher Y " "position are rendered in front of nodes with a lower Y position. If " "[code]false[/code], this and child [CanvasItem] nodes are rendered normally " "in scene tree order.\n" "With Y-sorting enabled on a parent node ('A') but disabled on a child node " "('B'), the child node ('B') is sorted but its children ('C1', 'C2', etc.) " "render together on the same Y position as the child node ('B'). This allows " "you to organize the render order of a scene without changing the scene tree.\n" "Nodes sort relative to each other only if they are on the same [member " "z_index]." msgstr "" "Si es [code]true[/code], este y los nodos [CanvasItem] hijos con una posición " "Y mayor se renderizan por delante de los nodos con una posición Y menor. Si " "[code]false[/code], este y los nodos [CanvasItem] hijos se renderizan " "normalmente en orden del árbol de escena.\n" "Con el Y-sort activado en un nodo padre ('A') pero desactivado en un nodo " "hijo ('B'), el nodo hijo ('B') se ordena pero sus propios hijos ('C1', 'C2', " "etc.) se renderizan juntos en la misma posición Y que el nodo hijo ('B'). " "Esto permite organizar el orden de renderizado de una escena sin modificar el " "árbol de escenas.\n" "Los nodos solo se ordenan entre sí si están en el mismo [member z_index]." msgid "" "If [code]true[/code], this node's final Z index is relative to its parent's Z " "index.\n" "For example, if [member z_index] is [code]2[/code] and its parent's final Z " "index is [code]3[/code], then this node's final Z index will be [code]5[/" "code] ([code]2 + 3[/code])." msgstr "" "Si es [code]true[/code], el índice Z final de este nodo es relativo al índice " "Z de su padre.\n" "Por ejemplo, si [member z_index] es [code]2[/code] y el índice Z final de su " "padre es [code]3[/code], entonces el índice Z final de este nodo será " "[code]5[/code] ([code]2 + 3[/code])." msgid "" "The order in which this node is drawn. A node with a higher Z index will " "display in front of others. Must be between [constant " "RenderingServer.CANVAS_ITEM_Z_MIN] and [constant " "RenderingServer.CANVAS_ITEM_Z_MAX] (inclusive).\n" "[b]Note:[/b] The Z index does [b]not[/b] affect the order in which " "[CanvasItem] nodes are processed or the way input events are handled. This is " "especially important to keep in mind for [Control] nodes." msgstr "" "El orden en el que se dibuja este nodo. Un nodo con un índice Z más alto se " "mostrará delante de los demás. Debe estar entre [constant " "RenderingServer.CANVAS_ITEM_Z_MIN] y [constant " "RenderingServer.CANVAS_ITEM_Z_MAX] (inclusive).\n" "[b]Nota:[/b] El índice Z [b]no[/b] afecta el orden en el que se procesan los " "nodos [CanvasItem] ni la forma en que se manejan los eventos de entrada. Esto " "es especialmente importante tenerlo en cuenta para los nodos [Control]." msgid "" "Emitted when the [CanvasItem] must redraw, [i]after[/i] the related [constant " "NOTIFICATION_DRAW] notification, and [i]before[/i] [method _draw] is called.\n" "[b]Note:[/b] Deferred connections do not allow drawing through the " "[code]draw_*[/code] methods." msgstr "" "Se emite cuando el [CanvasItem] debe volver a dibujarse, [i]después[/i] de la " "notificación [constant NOTIFICATION_DRAW] relacionada y [i]antes[/i] de que " "se llame a [method _draw].\n" "[b]Nota:[/b] Las conexiones diferidas no permiten dibujar a través de los " "métodos [code]draw_*[/code]." msgid "" "Emitted when this node becomes hidden, i.e. it's no longer visible in the " "tree (see [method is_visible_in_tree])." msgstr "" "Se emite cuando este nodo se oculta, es decir, ya no es visible en el árbol " "(ver [method is_visible_in_tree])." msgid "" "Emitted when the [CanvasItem]'s boundaries (position or size) change, or when " "an action took place that may have affected these boundaries (e.g. changing " "[member Sprite2D.texture])." msgstr "" "Se emite cuando los límites del [CanvasItem] (posición o tamaño) cambian, o " "cuando se realiza una acción que haya afectado dichos límites (por ejemplo, " "al cambiar [member Sprite2D.texture])." msgid "" "Emitted when the [CanvasItem]'s visibility changes, either because its own " "[member visible] property changed or because its visibility in the tree " "changed (see [method is_visible_in_tree]).\n" "This signal is emitted [i]after[/i] the related [constant " "NOTIFICATION_VISIBILITY_CHANGED] notification." msgstr "" "Se emite cuando cambia la visibilidad del [CanvasItem], ya sea porque su " "propia propiedad [member visible] cambió o porque su visibilidad en el árbol " "cambió (consulta [method is_visible_in_tree]).\n" "Esta señal se emite [i]después[/i] de la notificación relacionada [constant " "NOTIFICATION_VISIBILITY_CHANGED]." msgid "" "Notification received when this node's global transform changes, if [method " "is_transform_notification_enabled] is [code]true[/code]. See also [method " "set_notify_transform] and [method get_transform].\n" "[b]Note:[/b] Many canvas items such as [Camera2D] or [CollisionObject2D] " "automatically enable this in order to function correctly." msgstr "" "Notificación recibida cuando cambia el transform global de este Node, si " "[method is_transform_notification_enabled] está configurado en [code]true[/" "code]. Consulte también [method set_notify_transform] y [method " "get_transform].\n" "[b]Nota:[/b] Muchos canvas items como [Camera2D] o [CollisionObject2D] " "habilitan esto automáticamente para function correctamente." msgid "" "Notification received when this node's transform changes, if [method " "is_local_transform_notification_enabled] is [code]true[/code]. This is not " "received when a parent [Node2D]'s transform changes. See also [method " "set_notify_local_transform].\n" "[b]Note:[/b] Many canvas items such as [Camera2D] or [CollisionShape2D] " "automatically enable this in order to function correctly." msgstr "" "Notificación recibida cuando cambia el transform de este Node, si [method " "is_local_transform_notification_enabled] está configurado en [code]true[/" "code]. Esto no se recibe cuando cambia el transform de un Node2D padre. " "Consulte también [method set_notify_local_transform].\n" "[b]Nota:[/b] Muchos canvas items como [Camera2D] o [CollisionShape2D] " "habilitan esto automáticamente para function correctamente." msgid "The [CanvasItem] is requested to draw (see [method _draw])." msgstr "Se solicita que [CanvasItem] dibuje (véase [method _draw])." msgid "" "Notification received when this node's visibility changes (see [member " "visible] and [method is_visible_in_tree]).\n" "This notification is received [i]before[/i] the related [signal " "visibility_changed] signal." msgstr "" "Notificación recibida cuando cambia la visibilidad de este nodo (consulta " "[member visible] y [method is_visible_in_tree]).\n" "Esta notificación se recibe [i]antes[/i] de la señal relacionada [signal " "visibility_changed]." msgid "The [CanvasItem] has entered the canvas." msgstr "El [CanvasItem] ha entrado en el canvas." msgid "" "The [CanvasItem] has exited the canvas.\n" "This notification is sent in reversed order." msgstr "" "El [CanvasItem] ha salido del canvas.\n" "Esta notificación se envía en orden inverso." msgid "" "Notification received when this [CanvasItem] is registered to a new [World2D] " "(see [method get_world_2d])." msgstr "" "Notificación recibida cuando este [CanvasItem] se registra en un nuevo " "[World2D] (véase [method get_world_2d])." msgid "The [CanvasItem] will inherit the filter from its parent." msgstr "El [CanvasItem] heredará el filtro de su padre." msgid "" "The texture filter reads from the nearest pixel and blends between the " "nearest 2 mipmaps (or uses the nearest mipmap if [member " "ProjectSettings.rendering/textures/default_filters/use_nearest_mipmap_filter] " "is [code]true[/code]). This makes the texture look pixelated from up close, " "and smooth from a distance.\n" "Use this for non-pixel art textures that may be viewed at a low scale (e.g. " "due to [Camera2D] zoom or sprite scaling), as mipmaps are important to smooth " "out pixels that are smaller than on-screen pixels." msgstr "" "El filtro de textura lee del píxel más cercano y mezcla entre los 2 mipmaps " "más cercanos (o usa el mipmap más cercano si [member " "ProjectSettings.rendering/textures/default_filters/use_nearest_mipmap_filter] " "es [code]true[/code]). Esto hace que la textura se vea pixelada de cerca y " "suave de lejos.\n" "Úsalo para texturas que no son de arte de píxeles y que pueden verse a baja " "escala (por ejemplo, debido al zoom de [Camera2D] o al escalado de sprites), " "ya que los mipmaps son importantes para suavizar los píxeles que son más " "pequeños que los píxeles en pantalla." msgid "" "The texture filter blends between the nearest 4 pixels and between the " "nearest 2 mipmaps (or uses the nearest mipmap if [member " "ProjectSettings.rendering/textures/default_filters/use_nearest_mipmap_filter] " "is [code]true[/code]). This makes the texture look smooth from up close, and " "smooth from a distance.\n" "Use this for non-pixel art textures that may be viewed at a low scale (e.g. " "due to [Camera2D] zoom or sprite scaling), as mipmaps are important to smooth " "out pixels that are smaller than on-screen pixels." msgstr "" "El filtro de textura mezcla entre los 4 píxeles más cercanos y entre los 2 " "mipmaps más cercanos (o usa el mipmap más cercano si [member " "ProjectSettings.rendering/textures/default_filters/use_nearest_mipmap_filter] " "es [code]true[/code]). Esto hace que la textura se vea suave de cerca y suave " "de lejos.\n" "Úsalo para texturas que no son de arte de píxeles y que pueden verse a baja " "escala (por ejemplo, debido al zoom de [Camera2D] o al escalado de sprites), " "ya que los mipmaps son importantes para suavizar los píxeles que son más " "pequeños que los píxeles en pantalla." msgid "" "The texture filter reads from the nearest pixel and blends between 2 mipmaps " "(or uses the nearest mipmap if [member ProjectSettings.rendering/textures/" "default_filters/use_nearest_mipmap_filter] is [code]true[/code]) based on the " "angle between the surface and the camera view. This makes the texture look " "pixelated from up close, and smooth from a distance. Anisotropic filtering " "improves texture quality on surfaces that are almost in line with the camera, " "but is slightly slower. The anisotropic filtering level can be changed by " "adjusting [member ProjectSettings.rendering/textures/default_filters/" "anisotropic_filtering_level].\n" "[b]Note:[/b] This texture filter is rarely useful in 2D projects. [constant " "TEXTURE_FILTER_NEAREST_WITH_MIPMAPS] is usually more appropriate in this case." msgstr "" "El filtro de textura lee del píxel más cercano y mezcla entre 2 mipmaps (o " "usa el mipmap más cercano si [member ProjectSettings.rendering/textures/" "default_filters/use_nearest_mipmap_filter] es [code]true[/code]) basándose en " "el ángulo entre la superficie y la vista de la cámara. Esto hace que la " "textura se vea pixelada de cerca y suave de lejos. El filtrado anisotrópico " "mejora la calidad de la textura en superficies que están casi en línea con la " "cámara, pero es ligeramente más lento. El nivel de filtrado anisotrópico se " "puede cambiar ajustando [member ProjectSettings.rendering/textures/" "default_filters/anisotropic_filtering_level].\n" "[b]Nota:[/b] Este filtro de textura rara vez es útil en proyectos 2D. " "[constant TEXTURE_FILTER_NEAREST_WITH_MIPMAPS] suele ser más apropiado en " "este caso." msgid "" "The texture filter blends between the nearest 4 pixels and blends between 2 " "mipmaps (or uses the nearest mipmap if [member ProjectSettings.rendering/" "textures/default_filters/use_nearest_mipmap_filter] is [code]true[/code]) " "based on the angle between the surface and the camera view. This makes the " "texture look smooth from up close, and smooth from a distance. Anisotropic " "filtering improves texture quality on surfaces that are almost in line with " "the camera, but is slightly slower. The anisotropic filtering level can be " "changed by adjusting [member ProjectSettings.rendering/textures/" "default_filters/anisotropic_filtering_level].\n" "[b]Note:[/b] This texture filter is rarely useful in 2D projects. [constant " "TEXTURE_FILTER_LINEAR_WITH_MIPMAPS] is usually more appropriate in this case." msgstr "" "El filtro de textura mezcla entre los 4 píxeles más cercanos y mezcla entre 2 " "mipmaps (o usa el mipmap más cercano si [member ProjectSettings.rendering/" "textures/default_filters/use_nearest_mipmap_filter] es [code]true[/code]) " "basándose en el ángulo entre la superficie y la vista de la cámara. Esto hace " "que la textura se vea suave de cerca y suave de lejos. El filtrado " "anisotrópico mejora la calidad de la textura en superficies que están casi en " "línea con la cámara, pero es ligeramente más lento. El nivel de filtrado " "anisotrópico se puede cambiar ajustando [member ProjectSettings.rendering/" "textures/default_filters/anisotropic_filtering_level].\n" "[b]Nota:[/b] Este filtro de textura rara vez es útil en proyectos 2D. " "[constant TEXTURE_FILTER_LINEAR_WITH_MIPMAPS] suele ser más apropiado en este " "caso." msgid "" "The texture does not repeat. Sampling the texture outside its extents will " "result in \"stretching\" of the edge pixels. You can avoid this by ensuring a " "1-pixel fully transparent border on each side of the texture." msgstr "" "La textura no se repite. Muestrear la textura fuera de sus límites resultará " "en el \"estiramiento\" de los píxeles de los bordes. Puedes evitar esto " "asegurándote de que haya un borde de 1 píxel completamente transparente a " "cada lado de la textura." msgid "The texture repeats when exceeding the texture's size." msgstr "La textura se repite al exceder el tamaño de la textura." msgid "" "The texture repeats when the exceeding the texture's size in a \"2×2 tiled " "mode\". Repeated textures at even positions are mirrored." msgstr "" "La textura se repite al exceder el tamaño de la textura en un \"modo de " "mosaico 2×2\". Las texturas repetidas en posiciones pares se reflejan." msgid "Represents the size of the [enum TextureRepeat] enum." msgstr "Representa el tamaño del enum [enum TextureRepeat]." msgid "Children are drawn over this node and are not clipped." msgstr "Los hijos se dibujan sobre este nodo y no se recortan." msgid "" "This node is used as a mask and is [b]not[/b] drawn. The mask is based on " "this node's alpha channel: Opaque pixels are kept, transparent pixels are " "discarded, and semi-transparent pixels are blended in according to their " "opacity. Children are clipped to this node's drawn area." msgstr "" "Este nodo se usa como máscara y [b]no[/b] se dibuja. La máscara se basa en el " "canal alfa de este nodo: los píxeles opacos se mantienen, los píxeles " "transparentes se descartan y los píxeles semitransparentes se mezclan según " "su opacidad. Los hijos se recortan al área dibujada de este nodo." msgid "" "This node is used as a mask and is also drawn. The mask is based on this " "node's alpha channel: Opaque pixels are kept, transparent pixels are " "discarded, and semi-transparent pixels are blended in according to their " "opacity. Children are clipped to the parent's drawn area." msgstr "" "Este nodo se usa como máscara y también se dibuja. La máscara se basa en el " "canal alfa de este nodo: los píxeles opacos se mantienen, los píxeles " "transparentes se descartan y los píxeles semitransparentes se mezclan según " "su opacidad. Los hijos se recortan al área dibujada del padre." msgid "Represents the size of the [enum ClipChildrenMode] enum." msgstr "Representa el tamaño del enum [enum ClipChildrenMode]." msgid "A material for [CanvasItem]s." msgstr "Un material para [CanvasItem]s." msgid "" "[CanvasItemMaterial]s provide a means of modifying the textures associated " "with a CanvasItem. They specialize in describing blend and lighting behaviors " "for textures. Use a [ShaderMaterial] to more fully customize a material's " "interactions with a [CanvasItem]." msgstr "" "Los [CanvasItemMaterial]s proporcionan un medio de modificar las texturas " "asociadas a un CanvasItem. Se especializan en describir los comportamientos " "de mezcla e iluminación de las texturas. Utiliza un [ShaderMaterial] para " "personalizar más completamente las interacciones de un material con un " "[CanvasItem]." msgid "" "The manner in which a material's rendering is applied to underlying textures." msgstr "" "La manera en que la representación de un material se aplica a las texturas " "inferiores." msgid "The manner in which material reacts to lighting." msgstr "La manera en que el material reacciona a la iluminación." msgid "" "The number of columns in the spritesheet assigned as [Texture2D] for a " "[GPUParticles2D] or [CPUParticles2D].\n" "[b]Note:[/b] This property is only used and visible in the editor if [member " "particles_animation] is [code]true[/code]." msgstr "" "El número de columnas en la spritesheet asignada como [Texture2D] para un " "[GPUParticles2D] o [CPUParticles2D].\n" "[b]Nota:[/b] Esta propiedad solo se utiliza y es visible en el editor si " "[member particles_animation] es [code]true[/code]." msgid "" "If [code]true[/code], the particles animation will loop.\n" "[b]Note:[/b] This property is only used and visible in the editor if [member " "particles_animation] is [code]true[/code]." msgstr "" "Si es [code]true[/code], la animación de las partículas se hará en bucle.\n" "[b]Nota:[/b] Esta propiedad sólo se usa y es visible en el editor si [member " "particles_animation] es [code]true[/code]." msgid "" "The number of rows in the spritesheet assigned as [Texture2D] for a " "[GPUParticles2D] or [CPUParticles2D].\n" "[b]Note:[/b] This property is only used and visible in the editor if [member " "particles_animation] is [code]true[/code]." msgstr "" "El número de filas en la spritesheet asignada como [Texture2D] para un " "[GPUParticles2D] o [CPUParticles2D].\n" "[b]Nota:[/b] Esta propiedad solo se usa y es visible en el editor si [member " "particles_animation] es [code]true[/code]." msgid "" "Mix blending mode. Colors are assumed to be premultiplied by the alpha " "(opacity) value." msgstr "" "Modo de mezcla Mix. Se supone que los colores se premultiplican por el valor " "alfa (opacidad)." msgid "" "Render the material using both light and non-light sensitive material " "properties." msgstr "" "Renderizar el material utilizando tanto las propiedades de los materiales " "sensibles a la luz como las que no lo son." msgid "Render the material as if there were no light." msgstr "Renderiza el material como si no hubiera luz." msgid "Render the material as if there were only light." msgstr "Renderizar el material como si sólo hubiera luz." msgid "A node used for independent rendering of objects within a 2D scene." msgstr "" "Un nodo utilizado para el renderizado independiente de objetos dentro de una " "escena 2D." msgid "" "[CanvasItem]-derived nodes that are direct or indirect children of a " "[CanvasLayer] will be drawn in that layer. The layer is a numeric index that " "defines the draw order. The default 2D scene renders with index [code]0[/" "code], so a [CanvasLayer] with index [code]-1[/code] will be drawn below, and " "a [CanvasLayer] with index [code]1[/code] will be drawn above. This order " "will hold regardless of the [member CanvasItem.z_index] of the nodes within " "each layer.\n" "[CanvasLayer]s can be hidden and they can also optionally follow the " "viewport. This makes them useful for HUDs like health bar overlays (on layers " "[code]1[/code] and higher) or backgrounds (on layers [code]-1[/code] and " "lower).\n" "[b]Note:[/b] Embedded [Window]s are placed on layer [code]1024[/code]. " "[CanvasItem]s on layers [code]1025[/code] and higher appear in front of " "embedded windows.\n" "[b]Note:[/b] Each [CanvasLayer] is drawn on one specific [Viewport] and " "cannot be shared between multiple [Viewport]s, see [member custom_viewport]. " "When using multiple [Viewport]s, for example in a split-screen game, you need " "to create an individual [CanvasLayer] for each [Viewport] you want it to be " "drawn on." msgstr "" "Los nodos derivados de [CanvasItem] que son hijos directos o indirectos de un " "[CanvasLayer] se dibujarán en esa capa. La capa es un índice numérico que " "define el orden de dibujo. La escena 2D predeterminada se renderiza con el " "índice [code]0[/code], por lo que un [CanvasLayer] con índice [code]-1[/code] " "se dibujará debajo, y un [CanvasLayer] con índice [code]1[/code] se dibujará " "encima. Este orden se mantendrá independientemente del [member " "CanvasItem.z_index] de los nodos dentro de cada capa.\n" "Los [CanvasLayer] pueden ocultarse y también pueden seguir opcionalmente el " "viewport. Esto los hace útiles para HUDs como superposiciones de barras de " "vida (en capas [code]1[/code] y superiores) o fondos (en capas [code]-1[/" "code] e inferiores).\n" "[b]Nota:[/b] Las [Window] incrustadas se colocan en la capa [code]1024[/" "code]. Los [CanvasItem] en las capas [code]1025[/code] y superiores aparecen " "delante de las ventanas incrustadas.\n" "[b]Nota:[/b] Cada [CanvasLayer] se dibuja en un [Viewport] específico y no " "puede compartirse entre múltiples [Viewport]; consulta [member " "custom_viewport]. Al usar múltiples [Viewport], por ejemplo en un juego con " "pantalla dividida, necesitas crear un [CanvasLayer] individual para cada " "[Viewport] en el que quieras que se dibuje." msgid "Canvas layers" msgstr "Capas del canvas" msgid "Returns the RID of the canvas used by this layer." msgstr "Devuelve el RID del canvas usado por esta capa." msgid "" "The custom [Viewport] node assigned to the [CanvasLayer]. If [code]null[/" "code], uses the default viewport instead." msgstr "" "El nodo personalizado [Viewport] asignado al [CanvasLayer]. Si [code]null[/" "code], utiliza en su lugar la vista por defecto." msgid "" "If enabled, the [CanvasLayer] maintains its position in world space. If " "disabled, the [CanvasLayer] stays in a fixed position on the screen.\n" "Together with [member follow_viewport_scale], this can be used for a " "pseudo-3D effect." msgstr "" "Si está habilitado, el [CanvasLayer] mantiene su posición en el world space. " "Si está deshabilitado, el [CanvasLayer] se mantiene en una posición fija en " "la pantalla.\n" "Junto con [member follow_viewport_scale], esto puede usarse para un pseudo-3D " "effect." msgid "" "Layer index for draw order. Lower values are drawn behind higher values.\n" "[b]Note:[/b] If multiple CanvasLayers have the same layer index, [CanvasItem] " "children of one CanvasLayer are drawn behind the [CanvasItem] children of the " "other CanvasLayer. Which CanvasLayer is drawn in front is non-deterministic.\n" "[b]Note:[/b] The layer index should be between [constant " "RenderingServer.CANVAS_LAYER_MIN] and [constant " "RenderingServer.CANVAS_LAYER_MAX] (inclusive). Any other value will wrap " "around." msgstr "" "Índice de capa para el orden de dibujo. Los valores más bajos se dibujan " "detrás de los valores más altos.\n" "[b]Nota:[/b] Si varios CanvasLayers tienen el mismo índice de capa, los hijos " "[CanvasItem] de un CanvasLayer se dibujan detrás de los hijos [CanvasItem] " "del otro CanvasLayer. Qué CanvasLayer se dibuja al frente no es " "determinista.\n" "[b]Nota:[/b] El índice de capa debe estar entre [constant " "RenderingServer.CANVAS_LAYER_MIN] y [constant " "RenderingServer.CANVAS_LAYER_MAX] (inclusivo). Cualquier otro value se " "envolverá wrap alrededor." msgid "The layer's base offset." msgstr "El desplazamiento de la capa base." msgid "The layer's rotation in radians." msgstr "La rotación de la capa en radianes." msgid "The layer's scale." msgstr "La escala de la capa." msgid "The layer's transform." msgstr "La transformación de la capa." msgid "" "If [code]false[/code], any [CanvasItem] under this [CanvasLayer] will be " "hidden.\n" "Unlike [member CanvasItem.visible], visibility of a [CanvasLayer] isn't " "propagated to underlying layers." msgstr "" "Si es [code]false[/code], cualquier [CanvasItem] debajo de este [CanvasLayer] " "estará oculto.\n" "A diferencia de [member CanvasItem.visible], la visibilidad de un " "[CanvasLayer] no se propaga a capas subyacentes." msgid "Emitted when visibility of the layer is changed. See [member visible]." msgstr "" "Emitida cuando se modifica la visibilidad de la capa. Véase [member visible]." msgid "A node that applies a color tint to a canvas." msgstr "Un nodo que aplica un tinte de color a un canvas." msgid "" "[CanvasModulate] applies a color tint to all nodes on a canvas. Only one can " "be used to tint a canvas, but [CanvasLayer]s can be used to render things " "independently." msgstr "" "[CanvasModulate] aplica un tinte de color a todos los nodos en un canvas. " "Solo se puede usar uno para aplicar un tinte a un canvas, pero los " "[CanvasLayer] se pueden usar para el render de elementos de forma " "independiente." msgid "2D lights and shadows" msgstr "Luces y sombras 2D" msgid "The tint color to apply." msgstr "El color del tinte a aplicar." msgid "Texture with optional normal and specular maps for use in 2D rendering." msgstr "" "Textura con mapas normales y especulares opcionales para su uso en " "renderizado 2D." msgid "" "[CanvasTexture] is an alternative to [ImageTexture] for 2D rendering. It " "allows using normal maps and specular maps in any node that inherits from " "[CanvasItem]. [CanvasTexture] also allows overriding the texture's filter and " "repeat mode independently of the node's properties (or the project " "settings).\n" "[b]Note:[/b] [CanvasTexture] cannot be used in 3D. It will not display " "correctly when applied to any [VisualInstance3D], such as [Sprite3D] or " "[Decal]. For physically-based materials in 3D, use [BaseMaterial3D] instead." msgstr "" "[CanvasTexture] es una alternativa a [ImageTexture] para renderizado 2D. " "Permite usar mapas normales y mapas especulares en cualquier nodo que herede " "de [CanvasItem]. [CanvasTexture] también permite sobrescribir el modo de " "filtro y repetición de la textura independientemente de las propiedades del " "nodo (o project settings).\n" "[b]Nota:[/b] [CanvasTexture] no se puede usar en 3D. No se mostrará " "correctamente al aplicarse a cualquier [VisualInstance3D], como [Sprite3D] o " "[Decal]. Para materiales basados en física en 3D, usa [BaseMaterial3D] en su " "lugar." msgid "2D Lights and Shadows" msgstr "Luces y sombras en 2D" msgid "" "The diffuse (color) texture to use. This is the main texture you want to set " "in most cases." msgstr "" "La textura difusa (color) a usar. Esta es la textura principal que querrás " "establecer en la mayoría de los casos." msgid "" "The multiplier for specular reflection colors. The [Light2D]'s color is also " "taken into account when determining the reflection color. Only has a visible " "effect if [Light2D]s are affecting this [CanvasTexture]." msgstr "" "El multiplicador para los colores de reflexión especular. El color de " "[Light2D] también se tiene en cuenta al determinar el color de reflexión. " "Solo tiene un effect visible si los [Light2D] afectan a este [CanvasTexture]." msgid "" "The specular exponent for [Light2D] specular reflections. Higher values " "result in a more glossy/\"wet\" look, with reflections becoming more " "localized and less visible overall. The default value of [code]1.0[/code] " "disables specular reflections entirely. Only has a visible effect if " "[Light2D]s are affecting this [CanvasTexture]." msgstr "" "El exponente especular para los reflejos especulares de [Light2D]. Los values " "más altos resultan en un aspecto más lustroso/\"húmedo\", con los reflejos " "volviéndose más localizados y menos visibles en general. El value " "predeterminado de [code]1.0[/code] desactiva los reflejos especulares por " "completo. Solo tiene un effect visible si los [Light2D] están afectando a " "este [CanvasTexture]." msgid "" "The specular map to use for [Light2D] specular reflections. This should be a " "grayscale or colored texture, with brighter areas resulting in a higher " "[member specular_shininess] value. Using a colored [member specular_texture] " "allows controlling specular shininess on a per-channel basis. Only has a " "visible effect if [Light2D]s are affecting this [CanvasTexture]." msgstr "" "El mapa especular a usar para los reflejos especulares de [Light2D]. Debe ser " "una textura en escala de grises o coloreada, con áreas más brillantes que " "resulten en un [member specular_shininess] value más alto. Usar un [member " "specular_texture] coloreado permite controlar el brillo especular por canal. " "Solo tiene un effect visible si los [Light2D] están afectando a este " "[CanvasTexture]." msgid "The texture filtering mode to use when drawing this [CanvasTexture]." msgstr "" "El modo de filtrado de textura a utilizar al dibujar esta [CanvasTexture]." msgid "The texture repeat mode to use when drawing this [CanvasTexture]." msgstr "" "El modo de repetición de textura a utilizar al dibujar esta [CanvasTexture]." msgid "Class representing a capsule-shaped [PrimitiveMesh]." msgstr "Clase que representa una forma de capsula [PrimitiveMesh]." msgid "" "Total height of the capsule mesh (including the hemispherical ends).\n" "[b]Note:[/b] The [member height] of a capsule must be at least twice its " "[member radius]. Otherwise, the capsule becomes a circle. If the [member " "height] is less than twice the [member radius], the properties adjust to a " "valid value." msgstr "" "Altura total de la capsule mesh (incluidos los extremos semiesféricos).\n" "[b]Nota:[/b] El [member height] de una capsule debe ser al menos el doble de " "su [member radius]. De lo contrario, la capsule se convierte en un círculo. " "Si el [member height] es menor que el doble del [member radius], las " "propiedades se ajustan a un value válido." msgid "Number of radial segments on the capsule mesh." msgstr "Número de segmentos radiales en la malla de la cápsula." msgid "" "Radius of the capsule mesh.\n" "[b]Note:[/b] The [member radius] of a capsule cannot be greater than half of " "its [member height]. Otherwise, the capsule becomes a circle. If the [member " "radius] is greater than half of the [member height], the properties adjust to " "a valid value." msgstr "" "Radio de la capsule mesh.\n" "[b]Nota:[/b] El [member radius] de una capsule no puede ser mayor que la " "mitad de su [member height]. De lo contrario, la capsule se convierte en un " "círculo. Si el [member radius] es mayor que la mitad del [member height], las " "propiedades se ajustan a un value válido." msgid "Number of rings along the height of the capsule." msgstr "Número de anillos a lo largo de la altura de la cápsula." msgid "A 2D capsule shape used for physics collision." msgstr "Una forma de cápsula 2D utilizada para colisiones físicas." msgid "" "A 2D capsule shape, intended for use in physics. Usually used to provide a " "shape for a [CollisionShape2D].\n" "[b]Performance:[/b] [CapsuleShape2D] is fast to check collisions against, but " "it is slower than [RectangleShape2D] and [CircleShape2D]." msgstr "" "Una forma de cápsula 2D, para ser usada en física. Normalmente usada para " "proveer una forma para un [CollisionShape2D].\n" "[b]Rendimiento:[/b] [CapsuleShape2D] es rápida para comprobar colisiones, " "pero es más lenta que [RectangleShape2D] y [CircleShape2D]." msgid "" "The capsule's full height, including the semicircles.\n" "[b]Note:[/b] The [member height] of a capsule must be at least twice its " "[member radius]. Otherwise, the capsule becomes a circle. If the [member " "height] is less than twice the [member radius], the properties adjust to a " "valid value." msgstr "" "Altura total de la capsule, incluidos los semicírculos.\n" "[b]Nota:[/b] El [member height] de una capsule debe ser al menos el doble de " "su [member radius]. De lo contrario, la capsule se convierte en un círculo. " "Si el [member height] es menor que el doble del [member radius], las " "propiedades se ajustan a un value válido." msgid "" "The capsule's height, excluding the semicircles. This is the height of the " "central rectangular part in the middle of the capsule, and is the distance " "between the centers of the two semicircles. This is a wrapper for [member " "height]." msgstr "" "La altura de la cápsula, excluyendo los semicírculos. Esta es la altura de la " "parte rectangular central en el medio de la cápsula, y es la distancia entre " "los centros de los dos semicírculos. Esto es un envoltorio para [member " "height]." msgid "" "The capsule's radius.\n" "[b]Note:[/b] The [member radius] of a capsule cannot be greater than half of " "its [member height]. Otherwise, the capsule becomes a circle. If the [member " "radius] is greater than half of the [member height], the properties adjust to " "a valid value." msgstr "" "Radio de la capsule.\n" "[b]Nota:[/b] El [member radius] de una capsule no puede ser mayor que la " "mitad de su [member height]. De lo contrario, la capsule se convierte en un " "círculo. Si el [member radius] es mayor que la mitad del [member height], las " "propiedades se ajustan a un value válido." msgid "A 3D capsule shape used for physics collision." msgstr "Una forma de cápsula 3D utilizada para colisiones físicas." msgid "" "A 3D capsule shape, intended for use in physics. Usually used to provide a " "shape for a [CollisionShape3D].\n" "[b]Performance:[/b] [CapsuleShape3D] is fast to check collisions against. It " "is faster than [CylinderShape3D], but slower than [SphereShape3D] and " "[BoxShape3D]." msgstr "" "Una forma de cápsula 3D, para ser usada en física. Normalmente usada para " "proveer una forma para un [CollisionShape3D].\n" "[b]Rendimiento:[/b] [CapsuleShape3D] es rápida para comprobar colisiones. Es " "más rápida que [CylinderShape3D], pero más lenta que [SphereShape3D] y " "[BoxShape3D]." msgid "" "The capsule's full height, including the hemispheres.\n" "[b]Note:[/b] The [member height] of a capsule must be at least twice its " "[member radius]. Otherwise, the capsule becomes a sphere. If the [member " "height] is less than twice the [member radius], the properties adjust to a " "valid value." msgstr "" "Altura total de la capsule, incluidas las semiesferas.\n" "[b]Nota:[/b] El [member height] de una capsule debe ser al menos el doble de " "su [member radius]. De lo contrario, la capsule se convierte en una esfera. " "Si el [member height] es menor que el doble del [member radius], las " "propiedades se ajustan a un value válido." msgid "" "The capsule's height, excluding the hemispheres. This is the height of the " "central cylindrical part in the middle of the capsule, and is the distance " "between the centers of the two hemispheres. This is a wrapper for [member " "height]." msgstr "" "La altura de la cápsula, excluyendo los hemisferios. Esta es la altura de la " "parte cilíndrica central en el medio de la cápsula, y es la distancia entre " "los centros de los dos hemisferios. Esto es un envoltorio para [member " "height]." msgid "" "The capsule's radius.\n" "[b]Note:[/b] The [member radius] of a capsule cannot be greater than half of " "its [member height]. Otherwise, the capsule becomes a sphere. If the [member " "radius] is greater than half of the [member height], the properties adjust to " "a valid value." msgstr "" "Radio de la capsule.\n" "[b]Nota:[/b] El [member radius] de una capsule no puede ser mayor que la " "mitad de su [member height]. De lo contrario, la capsule se convierte en una " "esfera. Si el [member radius] es mayor que la mitad del [member height], las " "propiedades se ajustan a un value válido." msgid "Rotation based cyclic coordinate descent inverse kinematics solver." msgstr "" "Solver de cinemática inversa de descenso cíclico de coordenadas basado en " "rotación." msgid "" "[CCDIK3D] is rotation based IK, enabling fast and effective tracking even " "with large joint rotations. It's especially suitable for chains with " "limitations, providing smoother and more stable target tracking compared to " "[FABRIK3D].\n" "The resulting twist around the forward vector will always be kept from the " "previous pose.\n" "[b]Note:[/b] When the target is close to the root, it can cause unnatural " "movement, including joint flips and oscillations." msgstr "" "[CCDIK3D] es una IK basada en rotación que permite un seguimiento rápido y " "eficaz, incluso con grandes rotaciones de articulaciones. Es especialmente " "adecuado para cadenas con limitaciones, ofreciendo un seguimiento del " "objetivo más suave y estable en comparación con [FABRIK3D].\n" "La torsión resultante alrededor del vector frontal siempre se conservará a " "partir de la pose anterior.\n" "[b]Nota:[/b] Cuando el objetivo está cerca de la raíz, puede provocar " "movimientos antinaturales, incluyendo volteos de articulaciones y " "oscilaciones." msgid "A container that keeps child controls in its center." msgstr "Un contenedor que mantiene los controles hijos en su centro." msgid "" "[CenterContainer] is a container that keeps all of its child controls in its " "center at their minimum size." msgstr "" "[CenterContainer] es un contenedor que mantiene todos sus controles hijos en " "su centro en su tamaño mínimo." msgid "" "If [code]true[/code], centers children relative to the [CenterContainer]'s " "top left corner." msgstr "" "Si es [code]true[/code], centra a los hijos en relación con la esquina " "superior izquierda del [CenterContainer]." msgid "" "Sets the end bone tail length of the bone chain when [method " "is_end_bone_extended] is [code]true[/code]." msgstr "" "Establece la longitud de la cola del hueso final de la cadena de huesos " "cuando [method is_end_bone_extended] es [code]true[/code]." msgid "" "If [param enabled] is [code]true[/code], the end bone is extended to have a " "tail.\n" "The extended tail config is allocated to the last element in the joint list. " "In other words, if you set [param enabled] to [code]false[/code], the config " "of the last element in the joint list has no effect in the simulated result." msgstr "" "Si [param enabled] es [code]true[/code], el hueso final se extiende para " "tener una cola.\n" "La configuración de la cola extendida se asigna al último elemento de la " "lista de articulaciones. En otras palabras, si estableces [param enabled] en " "[code]false[/code], la configuración del último elemento de la lista de " "articulaciones no tiene efecto en el resultado simulado." msgid "A 2D physics body specialized for characters moved by script." msgstr "" "Un cuerpo de física 2D especializado para characters movidos por script." msgid "" "[CharacterBody2D] is a specialized class for physics bodies that are meant to " "be user-controlled. They are not affected by physics at all, but they affect " "other physics bodies in their path. They are mainly used to provide high-" "level API to move objects with wall and slope detection ([method " "move_and_slide] method) in addition to the general collision detection " "provided by [method PhysicsBody2D.move_and_collide]. This makes it useful for " "highly configurable physics bodies that must move in specific ways and " "collide with the world, as is often the case with user-controlled " "characters.\n" "For game objects that don't require complex movement or collision detection, " "such as moving platforms, [AnimatableBody2D] is simpler to configure." msgstr "" "[CharacterBody2D] es una clase especializada para cuerpos físicos diseñados " "para ser controlados por el usuario. No están afectados por la física en " "absoluto, pero sí afectan a otros cuerpos físicos en su trayectoria. " "Principalmente, se utilizan para proporcionar una API de alto nivel que " "permite mover objetos con detección de paredes y pendientes (método [method " "move_and_slide]), además de la detección general de colisiones que ofrece " "[method PhysicsBody2D.move_and_collide]. Esto los hace útiles para cuerpos " "físicos altamente configurables que deben moverse de maneras específicas y " "colisionar con el mundo, como suele ser el caso de los personajes controlados " "por el usuario.\n" "Para los objetos del juego que no requieren un movimiento complejo ni " "detección de colisiones, como plataformas móviles, [AnimatableBody2D] es más " "sencillo de configurar." msgid "Kinematic character (2D)" msgstr "Personaje cinemático (2D)" msgid "Using CharacterBody2D" msgstr "Usar CharacterBody2D" msgid "2D Kinematic Character Demo" msgstr "Demo de Personaje Cinemático en 2D" msgid "" "Allows to manually apply a snap to the floor regardless of the body's " "velocity. This function does nothing when [method is_on_floor] returns " "[code]true[/code]." msgstr "" "Permite aplicar manualmente un ajuste al suelo sin importar la velocidad del " "cuerpo. Esta función no hace nada cuando [method is_on_floor] devuelve " "[code]true[/code]." msgid "" "Returns the floor's collision angle at the last collision point according to " "[param up_direction], which is [constant Vector2.UP] by default. This value " "is always positive and only valid after calling [method move_and_slide] and " "when [method is_on_floor] returns [code]true[/code]." msgstr "" "Devuelve el ángulo de colisión del suelo en el último punto de colisión según " "[param up_direction], que es [constant Vector2.UP] por defecto. Este valor es " "siempre positivo y solo es válido después de llamar a [method move_and_slide] " "y cuando [method is_on_floor] devuelve [code]true[/code]." msgid "" "Returns the collision normal of the floor at the last collision point. Only " "valid after calling [method move_and_slide] and when [method is_on_floor] " "returns [code]true[/code].\n" "[b]Warning:[/b] The collision normal is not always the same as the surface " "normal." msgstr "" "Devuelve la normal de colisión del suelo en el último punto de colisión. Solo " "es válido después de llamar a [method move_and_slide] y cuando [method " "is_on_floor] devuelve [code]true[/code].\n" "[b]Advertencia:[/b] La normal de colisión no siempre es la misma que la " "normal de la superficie." msgid "" "Returns the last motion applied to the [CharacterBody2D] during the last call " "to [method move_and_slide]. The movement can be split into multiple motions " "when sliding occurs, and this method return the last one, which is useful to " "retrieve the current direction of the movement." msgstr "" "Devuelve el último movimiento aplicado al [CharacterBody2D] durante la última " "llamada a [method move_and_slide]. El movimiento se puede dividir en " "múltiples movimientos cuando se produce un deslizamiento, y este método " "devuelve el último, que es útil para recuperar la dirección actual del " "movimiento." msgid "" "Returns a [KinematicCollision2D] if a collision occurred. The returned value " "contains information about the latest collision that occurred during the last " "call to [method move_and_slide]. Returns [code]null[/code] if no collision " "occurred. See also [method get_slide_collision]." msgstr "" "Devuelve un [KinematicCollision2D] si ocurrió una colisión. El valor devuelto " "contiene información sobre la colisión más reciente que ocurrió durante la " "última llamada a [method move_and_slide]. Devuelve [code]null[/code] si no " "ocurrió ninguna colisión. Consulte también [method get_slide_collision]." msgid "" "Returns the linear velocity of the platform at the last collision point. Only " "valid after calling [method move_and_slide]." msgstr "" "Devuelve la velocidad lineal de la plataforma en el último punto de colisión. " "Solo es válido después de llamar a [method move_and_slide]." msgid "" "Returns the travel (position delta) that occurred during the last call to " "[method move_and_slide]." msgstr "" "Devuelve el recorrido (posición delta) que se produjo durante la última " "llamada a [method move_and_slide]." msgid "" "Returns the current real velocity since the last call to [method " "move_and_slide]. For example, when you climb a slope, you will move " "diagonally even though the velocity is horizontal. This method returns the " "diagonal movement, as opposed to [member velocity] which returns the " "requested velocity." msgstr "" "Devuelve la velocidad real actual desde la última llamada a [method " "move_and_slide]. Por ejemplo, al subir una pendiente, te moverás en diagonal " "aunque la velocidad sea horizontal. Este método devuelve el movimiento " "diagonal, a diferencia de [member velocity] que devuelve la velocidad " "solicitada." msgid "" "Returns the number of times the body collided and changed direction during " "the last call to [method move_and_slide]." msgstr "" "Devuelve el número de veces que el cuerpo chocó y cambió de dirección durante " "la última llamada a [method move_and_slide]." msgid "" "Returns the collision normal of the wall at the last collision point. Only " "valid after calling [method move_and_slide] and when [method is_on_wall] " "returns [code]true[/code].\n" "[b]Warning:[/b] The collision normal is not always the same as the surface " "normal." msgstr "" "Devuelve la normal de la colisión de la pared en el último punto de colisión. " "Solo es válido después de llamar a [method move_and_slide] y cuando [method " "is_on_wall] devuelve [code]true[/code].\n" "[b]Advertencia:[/b] La normal de colisión no siempre es la misma que la " "normal de la superficie." msgid "" "Returns [code]true[/code] if the body collided with the ceiling on the last " "call of [method move_and_slide]. Otherwise, returns [code]false[/code]. The " "[member up_direction] and [member floor_max_angle] are used to determine " "whether a surface is \"ceiling\" or not." msgstr "" "Devuelve [code]true[/code] si el cuerpo colisionó con el techo en la última " "llamada de [method move_and_slide]. De lo contrario, devuelve [code]false[/" "code]. Se utilizan [member up_direction] y [member floor_max_angle] para " "determinar si una superficie es «techo» o no." msgid "" "Returns [code]true[/code] if the body collided only with the ceiling on the " "last call of [method move_and_slide]. Otherwise, returns [code]false[/code]. " "The [member up_direction] and [member floor_max_angle] are used to determine " "whether a surface is \"ceiling\" or not." msgstr "" "Devuelve [code]true[/code] si el cuerpo colisionó solo con el techo en la " "última llamada de [method move_and_slide]. De lo contrario, devuelve " "[code]false[/code]. Se utilizan [member up_direction] y [member " "floor_max_angle] para determinar si una superficie es «techo» o no." msgid "" "Returns [code]true[/code] if the body collided with the floor on the last " "call of [method move_and_slide]. Otherwise, returns [code]false[/code]. The " "[member up_direction] and [member floor_max_angle] are used to determine " "whether a surface is \"floor\" or not." msgstr "" "Devuelve [code]true[/code] si el cuerpo colisionó con el suelo en la última " "llamada de [method move_and_slide]. De lo contrario, devuelve [code]false[/" "code]. Se utilizan [member up_direction] y [member floor_max_angle] para " "determinar si una superficie es «suelo» o no." msgid "" "Returns [code]true[/code] if the body collided only with the floor on the " "last call of [method move_and_slide]. Otherwise, returns [code]false[/code]. " "The [member up_direction] and [member floor_max_angle] are used to determine " "whether a surface is \"floor\" or not." msgstr "" "Devuelve [code]true[/code] si el cuerpo colisionó solo con el suelo en la " "última llamada de [method move_and_slide]. De lo contrario, devuelve " "[code]false[/code]. Se utilizan [member up_direction] y [member " "floor_max_angle] para determinar si una superficie es «suelo» o no." msgid "" "Returns [code]true[/code] if the body collided with a wall on the last call " "of [method move_and_slide]. Otherwise, returns [code]false[/code]. The " "[member up_direction] and [member floor_max_angle] are used to determine " "whether a surface is \"wall\" or not." msgstr "" "Devuelve [code]true[/code] si el cuerpo colisionó con una pared en la última " "llamada de [method move_and_slide]. De lo contrario, devuelve [code]false[/" "code]. Se utilizan [member up_direction] y [member floor_max_angle] para " "determinar si una superficie es «pared» o no." msgid "" "Returns [code]true[/code] if the body collided only with a wall on the last " "call of [method move_and_slide]. Otherwise, returns [code]false[/code]. The " "[member up_direction] and [member floor_max_angle] are used to determine " "whether a surface is \"wall\" or not." msgstr "" "Devuelve [code]true[/code] si el cuerpo colisionó solo con una pared en la " "última llamada de [method move_and_slide]. De lo contrario, devuelve " "[code]false[/code]. Se utilizan [member up_direction] y [member " "floor_max_angle] para determinar si una superficie es «pared» o no." msgid "" "Moves the body based on [member velocity]. If the body collides with another, " "it will slide along the other body (by default only on floor) rather than " "stop immediately. If the other body is a [CharacterBody2D] or [RigidBody2D], " "it will also be affected by the motion of the other body. You can use this to " "make moving and rotating platforms, or to make nodes push other nodes.\n" "This method should be used in [method Node._physics_process] (or in a method " "called by [method Node._physics_process]), as it uses the physics step's " "[code]delta[/code] value automatically in calculations. Otherwise, the " "simulation will run at an incorrect speed.\n" "Modifies [member velocity] if a slide collision occurred. To get the latest " "collision call [method get_last_slide_collision], for detailed information " "about collisions that occurred, use [method get_slide_collision].\n" "When the body touches a moving platform, the platform's velocity is " "automatically added to the body motion. If a collision occurs due to the " "platform's motion, it will always be first in the slide collisions.\n" "The general behavior and available properties change according to the [member " "motion_mode].\n" "Returns [code]true[/code] if the body collided, otherwise, returns " "[code]false[/code]." msgstr "" "Mueve el cuerpo en función de [member velocity]. Si el cuerpo colisiona con " "otro, se deslizará a lo largo del otro cuerpo (por defecto solo en el suelo) " "en lugar de detenerse inmediatamente. Si el otro cuerpo es un " "[CharacterBody2D] o [RigidBody2D], también se verá afectado por el motion del " "otro cuerpo. Puedes usar esto para crear plataformas en movimiento y " "rotación, o para hacer que los nodos empujen a otros nodos.\n" "Este método debe utilizarse en [method Node._physics_process] (o en un método " "llamado por [method Node._physics_process]), ya que utiliza automáticamente " "el value del [code]delta[/code] del physics step en los cálculos. De lo " "contrario, la simulación se ejecutará a una velocidad incorrecta.\n" "Modifica [member velocity] si se produjo una colisión de deslizamiento. Para " "obtener la colisión más reciente llama a [method get_last_slide_collision]; " "para información detallada sobre las colisiones que se hayan producido, usa " "[method get_slide_collision].\n" "Cuando el cuerpo toca una plataforma en movimiento, la velocidad de la " "plataforma se añade automáticamente al motion del cuerpo. Si se produce una " "colisión debido al motion de la plataforma, siempre ocupará el primer lugar " "en las colisiones de deslizamiento.\n" "El comportamiento general y las propiedades disponibles change según el " "[member motion_mode].\n" "Devuelve [code]true[/code] si el cuerpo colisionó; de lo contrario, devuelve " "[code]false[/code]." msgid "" "If [code]true[/code], the body will be able to move on the floor only. This " "option avoids to be able to walk on walls, it will however allow to slide " "down along them." msgstr "" "Si es [code]true[/code], el cuerpo solo podrá moverse por el suelo. Esta " "opción impide caminar por las paredes, aunque permite deslizarse hacia abajo " "por ellas." msgid "" "If [code]false[/code] (by default), the body will move faster on downward " "slopes and slower on upward slopes.\n" "If [code]true[/code], the body will always move at the same speed on the " "ground no matter the slope. Note that you need to use [member " "floor_snap_length] to stick along a downward slope at constant speed." msgstr "" "Si es [code]false[/code] (por defecto), el cuerpo se moverá más rápido en " "pendientes descendentes y más lento en pendientes ascendentes.\n" "Si es [code]true[/code], el cuerpo siempre se moverá a la misma velocidad en " "el suelo, independientemente de la pendiente. Ten en cuenta que debes usar " "[member floor_snap_length] para seguir a lo largo de una pendiente " "descendente a una velocidad constante." msgid "" "Maximum angle (in radians) where a slope is still considered a floor (or a " "ceiling), rather than a wall, when calling [method move_and_slide]. The " "default value equals 45 degrees." msgstr "" "Ángulo máximo (en radianes) en el que una pendiente se sigue considerando un " "suelo (o un techo), en lugar de una pared, al llamar a [method " "move_and_slide]. El valor predeterminado equivale a 45 grados." msgid "" "Sets a snapping distance. When set to a value different from [code]0.0[/" "code], the body is kept attached to slopes when calling [method " "move_and_slide]. The snapping vector is determined by the given distance " "along the opposite direction of the [member up_direction].\n" "As long as the snapping vector is in contact with the ground and the body " "moves against [member up_direction], the body will remain attached to the " "surface. Snapping is not applied if the body moves along [member " "up_direction], meaning it contains vertical rising velocity, so it will be " "able to detach from the ground when jumping or when the body is pushed up by " "something. If you want to apply a snap without taking into account the " "velocity, use [method apply_floor_snap]." msgstr "" "Establece una distancia de snap. Cuando se establece en un value distinto de " "[code]0.0[/code], el cuerpo se mantiene attached a las pendientes al llamar a " "[method move_and_slide]. El vector de snap se determina por la distancia dada " "en la dirección opuesta a [member up_direction].\n" "Mientras el vector de snap esté en contacto con el suelo y el cuerpo se mueva " "contra [member up_direction], el cuerpo permanecerá attached a la superficie. " "El snap no se aplica si el cuerpo se mueve a lo largo de [member " "up_direction], lo que significa que contiene velocidad de ascenso vertical, " "por lo que podrá despegarse del suelo al saltar o cuando el cuerpo sea " "empujado hacia arriba por algo. Si deseas aplicar un snap sin tener en cuenta " "la velocidad, usa [method apply_floor_snap]." msgid "" "If [code]true[/code], the body will not slide on slopes when calling [method " "move_and_slide] when the body is standing still.\n" "If [code]false[/code], the body will slide on floor's slopes when [member " "velocity] applies a downward force." msgstr "" "Si es [code]true[/code], el cuerpo no se deslizará por las pendientes al " "llamar a [method move_and_slide] cuando esté quieto.\n" "Si es [code]false[/code], el cuerpo se deslizará por las pendientes del suelo " "cuando [member velocity] aplique una fuerza hacia abajo." msgid "" "Collision layers that will be included for detecting floor bodies that will " "act as moving platforms to be followed by the [CharacterBody2D]. By default, " "all floor bodies are detected and propagate their velocity." msgstr "" "Capas de colisión que se incluirán para detectar cuerpos de suelo que " "actuarán como plataformas móviles a seguir por el [CharacterBody2D]. Por " "defecto, todos los cuerpos de suelo se detectan y propagan su velocidad." msgid "" "Sets the behavior to apply when you leave a moving platform. By default, to " "be physically accurate, when you leave the last platform velocity is applied." msgstr "" "Establece el comportamiento a aplicar al abandonar una plataforma móvil. Por " "defecto, para ser físicamente preciso, cuando abandonas la última plataforma " "se aplica su velocidad." msgid "" "Collision layers that will be included for detecting wall bodies that will " "act as moving platforms to be followed by the [CharacterBody2D]. By default, " "all wall bodies are ignored." msgstr "" "Capas de colisión que se incluirán para detectar cuerpos de pared que " "actuarán como plataformas móviles a seguir por el [CharacterBody2D]. Por " "defecto, todos los cuerpos de pared se ignoran." msgid "" "Extra margin used for collision recovery when calling [method " "move_and_slide].\n" "If the body is at least this close to another body, it will consider them to " "be colliding and will be pushed away before performing the actual motion.\n" "A higher value means it's more flexible for detecting collision, which helps " "with consistently detecting walls and floors.\n" "A lower value forces the collision algorithm to use more exact detection, so " "it can be used in cases that specifically require precision, e.g at very low " "scale to avoid visible jittering, or for stability with a stack of character " "bodies." msgstr "" "Margen adicional utilizado para la recuperación de colisiones al llamar a " "[method move_and_slide].\n" "Si el cuerpo está al menos a esta distancia de otro cuerpo, se considerará " "que están colisionando y será empujado antes de realizar el motion real.\n" "Un value más alto significa que es más flexible para detectar colisiones, lo " "que ayuda a detectar paredes y suelos de forma consistente.\n" "Un value más bajo obliga al algoritmo de colisión a utilizar una detección " "más exacta, por lo que puede usarse en casos que requieran precisión " "específicamente, por ejemplo, a una escala muy baja para evitar vibraciones " "visibles, o para lograr estabilidad con una pila de cuerpos de personaje." msgid "" "Vector pointing upwards, used to determine what is a wall and what is a floor " "(or a ceiling) when calling [method move_and_slide]. Defaults to [constant " "Vector2.UP]. As the vector will be normalized it can't be equal to [constant " "Vector2.ZERO], if you want all collisions to be reported as walls, consider " "using [constant MOTION_MODE_FLOATING] as [member motion_mode]." msgstr "" "Vector que apunta hacia arriba, utilizado para determinar qué es una pared y " "qué es un suelo (o un techo) al llamar a [method move_and_slide]. Defaults a " "[constant Vector2.UP]. Como el vector se normalizará, no puede ser igual a " "[constant Vector2.ZERO]; si deseas que todas las colisiones se informen como " "paredes, considera usar [constant MOTION_MODE_FLOATING] como [member " "motion_mode]." msgid "" "Current velocity vector in pixels per second, used and modified during calls " "to [method move_and_slide].\n" "[b]Note:[/b] A common mistake is setting this property to the desired " "velocity multiplied by [code]delta[/code], which produces a motion vector in " "pixels." msgstr "" "Vector de velocidad actual en píxeles por segundo, utilizado y modificado " "durante las llamadas a [method move_and_slide].\n" "[b]Nota:[/b] Un error common es establecer esta propiedad a la velocidad " "deseada multiplicada por [code]delta[/code], lo que produce un vector de " "motion en píxeles." msgid "" "Minimum angle (in radians) where the body is allowed to slide when it " "encounters a wall. The default value equals 15 degrees. This property only " "affects movement when [member motion_mode] is [constant MOTION_MODE_FLOATING]." msgstr "" "Ángulo mínimo (en radianes) en el que se permite que el cuerpo se deslice al " "encontrar una pared. El value predeterminado equivale a 15 grados. Esta " "propiedad solo afecta al movimiento cuando [member motion_mode] es [constant " "MOTION_MODE_FLOATING]." msgid "" "Apply when notions of walls, ceiling and floor are relevant. In this mode the " "body motion will react to slopes (acceleration/slowdown). This mode is " "suitable for sided games like platformers." msgstr "" "Se aplica cuando las nociones de paredes, techo y suelo son relevantes. En " "este modo, el motion del cuerpo reaccionará a las pendientes (aceleración/" "desaceleración). Este modo es adecuado para juegos laterales como los " "plataformas." msgid "" "Apply when there is no notion of floor or ceiling. All collisions will be " "reported as [code]on_wall[/code]. In this mode, when you slide, the speed " "will always be constant. This mode is suitable for top-down games." msgstr "" "Se aplica cuando no hay noción de suelo o techo. Todas las colisiones se " "informarán como [code]on_wall[/code]. En este modo, al deslizarse, la " "velocidad siempre será constante. Este modo es adecuado para juegos con vista " "cenital." msgid "" "Add the last platform velocity to the [member velocity] when you leave a " "moving platform." msgstr "" "Añade la velocidad de la última plataforma a [member velocity] al abandonar " "una plataforma móvil." msgid "" "Add the last platform velocity to the [member velocity] when you leave a " "moving platform, but any downward motion is ignored. It's useful to keep full " "jump height even when the platform is moving down." msgstr "" "Añade la velocidad de la última plataforma a [member velocity] al abandonar " "una plataforma móvil, pero se ignora cualquier motion hacia abajo. Es útil " "para mantener la altura total del salto incluso cuando la plataforma se mueve " "hacia abajo." msgid "Do nothing when leaving a platform." msgstr "No hacer nada al salir de una plataforma." msgid "A 3D physics body specialized for characters moved by script." msgstr "Cuerpo de physics 3D especializado para personajes movidos por script." msgid "" "[CharacterBody3D] is a specialized class for physics bodies that are meant to " "be user-controlled. They are not affected by physics at all, but they affect " "other physics bodies in their path. They are mainly used to provide high-" "level API to move objects with wall and slope detection ([method " "move_and_slide] method) in addition to the general collision detection " "provided by [method PhysicsBody3D.move_and_collide]. This makes it useful for " "highly configurable physics bodies that must move in specific ways and " "collide with the world, as is often the case with user-controlled " "characters.\n" "For game objects that don't require complex movement or collision detection, " "such as moving platforms, [AnimatableBody3D] is simpler to configure." msgstr "" "[CharacterBody3D] es una clase especializada para cuerpos físicos destinados " "a ser controlados por el usuario. No se ven afectados por la física en " "absoluto, pero afectan a otros cuerpos físicos en su trayectoria. Se utilizan " "principalmente para proporcionar una API de alto nivel para mover objetos con " "detección de paredes y pendientes (método [method move_and_slide]), además de " "la detección de colisiones general proporcionada por [method " "PhysicsBody3D.move_and_collide]. Esto los hace útiles para cuerpos físicos " "altamente configurables que deben moverse de formas específicas y colisionar " "con el mundo, como suele ser el caso de los personajes controlados por el " "usuario.\n" "Para objetos de juego que no requieren un movimiento complejo o detección de " "colisiones, como plataformas móviles, [AnimatableBody3D] es más sencillo de " "configurar." msgid "" "Returns the last motion applied to the [CharacterBody3D] during the last call " "to [method move_and_slide]. The movement can be split into multiple motions " "when sliding occurs, and this method return the last one, which is useful to " "retrieve the current direction of the movement." msgstr "" "Devuelve el último movimiento aplicado al [CharacterBody3D] durante la última " "llamada a [method move_and_slide]. El movimiento puede dividirse en múltiples " "desplazamientos cuando ocurre un deslizamiento, y este método devuelve el " "último de ellos, lo cual es útil para obtener la dirección actual del " "movimiento." msgid "" "Returns a [KinematicCollision3D] if a collision occurred. The returned value " "contains information about the latest collision that occurred during the last " "call to [method move_and_slide]. Returns [code]null[/code] if no collision " "occurred. See also [method get_slide_collision]." msgstr "" "Devuelve un [KinematicCollision3D] si ocurrió una colisión. El valor devuelto " "contiene información sobre la colisión más reciente que ocurrió durante la " "última llamada a [method move_and_slide]. Devuelve [code]null[/code] si no " "ocurrió ninguna colisión. Consulte también [method get_slide_collision]." msgid "" "Returns the angular velocity of the platform at the last collision point. " "Only valid after calling [method move_and_slide]." msgstr "" "Devuelve la velocidad angular de la plataforma en el último punto de " "colisión. Solo es válido tras llamar a [method move_and_slide]." msgid "" "Moves the body based on [member velocity]. If the body collides with another, " "it will slide along the other body rather than stop immediately. If the other " "body is a [CharacterBody3D] or [RigidBody3D], it will also be affected by the " "motion of the other body. You can use this to make moving and rotating " "platforms, or to make nodes push other nodes.\n" "This method should be used in [method Node._physics_process] (or in a method " "called by [method Node._physics_process]), as it uses the physics step's " "[code]delta[/code] value automatically in calculations. Otherwise, the " "simulation will run at an incorrect speed.\n" "Modifies [member velocity] if a slide collision occurred. To get the latest " "collision call [method get_last_slide_collision], for more detailed " "information about collisions that occurred, use [method " "get_slide_collision].\n" "When the body touches a moving platform, the platform's velocity is " "automatically added to the body motion. If a collision occurs due to the " "platform's motion, it will always be first in the slide collisions.\n" "Returns [code]true[/code] if the body collided, otherwise, returns " "[code]false[/code]." msgstr "" "Mueve el cuerpo basándose en [member velocity]. Si el cuerpo colisiona con " "otro, se deslizará a lo largo del otro cuerpo en lugar de detenerse " "inmediatamente. Si el otro cuerpo es un [CharacterBody3D] o un [RigidBody3D], " "también se verá afectado por el movimiento del otro cuerpo. Puedes usar esto " "para crear plataformas móviles y rotatorias, o para hacer que los nodos " "empujen a otros nodos.\n" "Este método debe utilizarse en [method Node._physics_process] (o en un método " "llamado por [method Node._physics_process]), ya que utiliza automáticamente " "el valor [code]delta[/code] del paso de física en los cálculos. De lo " "contrario, la simulación se ejecutará a una velocidad incorrecta.\n" "Modifica [member velocity] si ocurrió una colisión con deslizamiento. Para " "obtener la colisión más reciente, llama a [method get_last_slide_collision]. " "Para obtener información más detallada sobre las colisiones ocurridas, " "utiliza [method get_slide_collision].\n" "Cuando el cuerpo toca una plataforma móvil, la velocidad de la plataforma se " "añade automáticamente al movimiento del cuerpo. Si ocurre una colisión debido " "al movimiento de la plataforma, esta será siempre la primera en las " "colisiones por deslizamiento.\n" "Devuelve [code]true[/code] si el cuerpo colisionó; de lo contrario, devuelve " "[code]false[/code]." msgid "" "Collision layers that will be included for detecting floor bodies that will " "act as moving platforms to be followed by the [CharacterBody3D]. By default, " "all floor bodies are detected and propagate their velocity." msgstr "" "Capas de colisión que se incluirán para detectar cuerpos en el suelo que " "actuarán como plataformas móviles seguidas por el [CharacterBody3D]. Por " "defecto, se detectan todos los cuerpos en el suelo y propagan su velocidad." msgid "" "Collision layers that will be included for detecting wall bodies that will " "act as moving platforms to be followed by the [CharacterBody3D]. By default, " "all wall bodies are ignored." msgstr "" "Capas de colisión que se incluirán para detectar cuerpos en las paredes que " "actuarán como plataformas móviles seguidas por el [CharacterBody3D]. Por " "defecto, se ignoran todos los cuerpos en las paredes." msgid "" "Vector pointing upwards, used to determine what is a wall and what is a floor " "(or a ceiling) when calling [method move_and_slide]. Defaults to [constant " "Vector3.UP]. As the vector will be normalized it can't be equal to [constant " "Vector3.ZERO], if you want all collisions to be reported as walls, consider " "using [constant MOTION_MODE_FLOATING] as [member motion_mode]." msgstr "" "Vector que apunta hacia arriba, utilizado para determinar qué es una pared y " "qué es un suelo (o un techo) al llamar a [method move_and_slide]. Por defecto " "es [constant Vector3.UP]. Dado que el vector se normalizará, no puede ser " "igual a [constant Vector3.ZERO]; si deseas que todas las colisiones se " "reporten como paredes, considera usar [constant MOTION_MODE_FLOATING] como " "[member motion_mode]." msgid "" "Current velocity vector (typically meters per second), used and modified " "during calls to [method move_and_slide].\n" "[b]Note:[/b] A common mistake is setting this property to the desired " "velocity multiplied by [code]delta[/code], which produces a motion vector " "(typically in meters)." msgstr "" "Vector de velocidad actual (normalmente en metros por segundo), utilizado y " "modificado durante las llamadas a [method move_and_slide].\n" "[b]Nota:[/b] Un error común es establecer esta propiedad con la velocidad " "deseada multiplicada por [code]delta[/code], lo que produce un vector de " "movimiento (normalmente en metros)." msgid "" "Minimum angle (in radians) where the body is allowed to slide when it " "encounters a wall. The default value equals 15 degrees. When [member " "motion_mode] is [constant MOTION_MODE_GROUNDED], it only affects movement if " "[member floor_block_on_wall] is [code]true[/code]." msgstr "" "Ángulo mínimo (en radianes) en el que el cuerpo tiene permitido deslizarse " "cuando encuentra una pared. El valor por defecto es igual a 15 grados. Cuando " "[member motion_mode] es [constant MOTION_MODE_GROUNDED], solo afecta al " "movimiento si [member floor_block_on_wall] es [code]true[/code]." msgid "" "Apply when notions of walls, ceiling and floor are relevant. In this mode the " "body motion will react to slopes (acceleration/slowdown). This mode is " "suitable for grounded games like platformers." msgstr "" "Se aplica cuando las nociones de paredes, techo y suelo son relevantes. En " "este modo, el movimiento del cuerpo reaccionará a las pendientes (aceleración/" "desaceleración). Este modo es adecuado para juegos basados en el suelo, como " "los de plataformas." msgid "" "Apply when there is no notion of floor or ceiling. All collisions will be " "reported as [code]on_wall[/code]. In this mode, when you slide, the speed " "will always be constant. This mode is suitable for games without ground like " "space games." msgstr "" "Se aplica cuando no existen las nociones de suelo o techo. Todas las " "colisiones se reportarán como [code]on_wall[/code]. En este modo, al " "deslizarse, la velocidad será siempre constante. Este modo es adecuado para " "juegos sin suelo, como los juegos espaciales." msgid "" "Controls how an individual character will be displayed in a [RichTextEffect]." msgstr "" "Controla cómo se mostrará un personaje individual en un [RichTextEffect]." msgid "" "By setting various properties on this object, you can control how individual " "characters will be displayed in a [RichTextEffect]." msgstr "" "Al establecer varias propiedades en este objeto, puedes controlar cómo se " "mostrarán los caracteres individuales en un [RichTextEffect]." msgid "BBCode in RichTextLabel" msgstr "BBCode en RichTextLabel" msgid "The color the character will be drawn with." msgstr "El color con el que se dibujará el carácter." msgid "" "The time elapsed since the [RichTextLabel] was added to the scene tree (in " "seconds). Time stops when the [RichTextLabel] is paused (see [member " "Node.process_mode]). Resets when the text in the [RichTextLabel] is changed.\n" "[b]Note:[/b] Time still passes while the [RichTextLabel] is hidden." msgstr "" "El tiempo transcurrido desde que el [RichTextLabel] fue añadido al árbol de " "escenas (en segundos). El tiempo se detiene cuando el [RichTextLabel] está en " "pausa (véase [member Node.process_mode]). Se reinicia cuando cambia el texto " "en el [RichTextLabel].\n" "[b]Nota:[/b] El tiempo sigue pasando mientras el [RichTextLabel] está oculto." msgid "" "Contains the arguments passed in the opening BBCode tag. By default, " "arguments are strings; if their contents match a type such as [bool], [int] " "or [float], they will be converted automatically. Color codes in the form " "[code]#rrggbb[/code] or [code]#rgb[/code] will be converted to an opaque " "[Color]. String arguments may not contain spaces, even if they're quoted. If " "present, quotes will also be present in the final string.\n" "For example, the opening BBCode tag [code][example foo=hello bar=true baz=42 " "color=#ffffff][/code] will map to the following [Dictionary]:\n" "[codeblock]\n" "{\"foo\": \"hello\", \"bar\": true, \"baz\": 42, \"color\": Color(1, 1, 1, " "1)}\n" "[/codeblock]" msgstr "" "Contiene los argumentos pasados en la etiqueta de apertura de BBCode. Por " "defecto, los argumentos son strings; si su contenido coincide con un tipo " "como [bool], [int] o [float], se convertirán automáticamente. Los códigos de " "color en la forma [code]#rrggbb[/code] o [code]#rgb[/code] se convertirán en " "un [Color] opaco. Los argumentos de string pueden no contener espacios, " "incluso si son citados. Si están presentes, las comillas también estarán " "presentes en la string final.\n" "Por ejemplo, la etiqueta de apertura de BBCode [code][example foo=hello " "bar=true baz=42 color=#ffffff][/code] se asignará al siguiente [Dictionary]:\n" "[codeblock]\n" "{\"foo\": \"hola\", \"bar\": true, \"baz\": 42, \"color\": Color(1, 1, 1, " "1)}\n" "[/codeblock]" msgid "" "[TextServer] RID of the font used to render glyph, this value can be used " "with [code]TextServer.font_*[/code] methods to retrieve font information.\n" "[b]Note:[/b] Read-only. Setting this property won't affect drawing." msgstr "" "El RID del [TextServer] de la fuente usada para renderizar el glifo, este " "valor puede ser usado con los métodos [code]TextServer.font_*[/code] para " "recuperar información de la fuente.\n" "[b]Nota:[/b] Solo lectura. Establecer esta propiedad no afectará el dibujo." msgid "" "Number of glyphs in the grapheme cluster. This value is set in the first " "glyph of a cluster.\n" "[b]Note:[/b] Read-only. Setting this property won't affect drawing." msgstr "" "Número de glifos en el clúster de grafemas. Este valor se establece en el " "primer glifo de un clúster.\n" "[b]Nota:[/b] Solo lectura. Establecer esta propiedad no afectará el dibujo." msgid "" "Glyph flags. See [enum TextServer.GraphemeFlag] for more info.\n" "[b]Note:[/b] Read-only. Setting this property won't affect drawing." msgstr "" "Banderas de glifo. Véase [enum TextServer.GraphemeFlag] para más " "información.\n" "[b]Nota:[/b] Solo lectura. Establecer esta propiedad no afectará el dibujo." msgid "" "Glyph index specific to the [member font]. If you want to replace this glyph, " "use [method TextServer.font_get_glyph_index] with [member font] to get a new " "glyph index for a single character." msgstr "" "Índice de glifo específico de la [member font]. Si quieres reemplazar este " "glifo, usa [method TextServer.font_get_glyph_index] con [member font] para " "obtener un nuevo índice de glifo para un único carácter." msgid "The position offset the character will be drawn with (in pixels)." msgstr "" "La posición de desplazamiento con el que el carácter será dibujado (en " "píxeles)." msgid "" "If [code]true[/code], FX transform is called for outline drawing.\n" "[b]Note:[/b] Read-only. Setting this property won't affect drawing." msgstr "" "Si es [code]true[/code], la transformación FX es llamada para el dibujo del " "contorno.\n" "[b]Nota:[/b] Solo lectura. Establecer esta propiedad no afectará el dibujo." msgid "" "Absolute character range in the string, corresponding to the glyph.\n" "[b]Note:[/b] Read-only. Setting this property won't affect drawing." msgstr "" "Rango de caracteres absoluto en la string, correspondiente al glifo.\n" "[b]Nota:[/b] Solo lectura. Establecer esta propiedad no afectará el dibujo." msgid "" "The character offset of the glyph, relative to the current [RichTextEffect] " "custom block.\n" "[b]Note:[/b] Read-only. Setting this property won't affect drawing." msgstr "" "El desplazamiento de caracteres del glifo, relativo al bloque personalizado " "del [RichTextEffect] actual.\n" "[b]Nota:[/b] Solo lectura. Establecer esta propiedad no afectará el dibujo." msgid "" "The current transform of the current glyph. It can be overridden (for " "example, by driving the position and rotation from a curve). You can also " "alter the existing value to apply transforms on top of other effects." msgstr "" "La transformación actual del glifo actual. Se puede sobreescribir (por " "ejemplo, manejando la posición y la rotación desde una curva). También puedes " "alterar el valor existente para aplicar transformaciones sobre otros efectos." msgid "" "If [code]true[/code], the character will be drawn. If [code]false[/code], the " "character will be hidden. Characters around hidden characters will reflow to " "take the space of hidden characters. If this is not desired, set their " "[member color] to [code]Color(1, 1, 1, 0)[/code] instead." msgstr "" "Si es [code]true[/code], el carácter será dibujado. Si es [code]false[/code], " "el carácter se ocultará. Los caracteres alrededor de los caracteres ocultos " "se posicionarán para tomar el espacio de los caracteres ocultos. Si no se " "desea esto, establezca su [member color] a [code]Color(1, 1, 1, 0)[/code] en " "su lugar." msgid "A button that represents a binary choice." msgstr "Un botón que representa una elección binaria." msgid "" "[CheckBox] allows the user to choose one of only two possible options. It's " "similar to [CheckButton] in functionality, but it has a different appearance. " "To follow established UX patterns, it's recommended to use [CheckBox] when " "toggling it has [b]no[/b] immediate effect on something. For example, it " "could be used when toggling it will only do something once a confirmation " "button is pressed.\n" "See also [BaseButton] which contains common properties and methods associated " "with this node.\n" "When [member BaseButton.button_group] specifies a [ButtonGroup], [CheckBox] " "changes its appearance to that of a radio button and uses the various " "[code]radio_*[/code] theme properties." msgstr "" "[CheckBox] permite al usuario elegir una de solo dos opciones posibles. Es " "similar a [CheckButton] en funcionalidad, pero tiene una apariencia " "diferente. Para seguir los patrones de UX establecidos, se recomienda usar " "[CheckBox] cuando al alternarlo [b]no[/b] tiene un efecto inmediato sobre " "algo. Por ejemplo, podría usarse cuando al alternarlo solo hará algo una vez " "que se presione un botón de confirmación.\n" "Véase también [BaseButton] que contiene propiedades y métodos comunes " "asociados con este nodo.\n" "Cuando [member BaseButton.button_group] especifica un [ButtonGroup], " "[CheckBox] cambia su apariencia a la de un botón de opción y usa las diversas " "propiedades de tema [code]radio_*[/code]." msgid "The color of the checked icon when the checkbox is pressed." msgstr "El color del icono de marca cuando la casilla está presionada." msgid "The color of the unchecked icon when the checkbox is not pressed." msgstr "" "El color del icono sin marcar cuando la casilla de verificación no está " "presionada." msgid "The vertical offset used when rendering the check icons (in pixels)." msgstr "" "El desplazamiento vertical utilizado al renderizar los check icons (en " "píxeles)." msgid "The check icon to display when the [CheckBox] is checked." msgstr "El check icon que se muestra cuando se marca el [CheckBox]." msgid "" "The check icon to display when the [CheckBox] is checked and is disabled." msgstr "" "El icono de marca que se muestra cuando el [CheckBox] está marcado y " "desactivado." msgid "" "The check icon to display when the [CheckBox] is configured as a radio button " "and is checked." msgstr "" "El icono de marca que se muestra cuando el [CheckBox] está configurado como " "un botón de radio y está marcado." msgid "" "The check icon to display when the [CheckBox] is configured as a radio " "button, is disabled, and is unchecked." msgstr "" "El icono de marca que se muestra cuando el [CheckBox] está configurado como " "un botón de radio, está desactivado y desmarcado." msgid "" "The check icon to display when the [CheckBox] is configured as a radio button " "and is unchecked." msgstr "" "El icono de marca que se muestra cuando el [CheckBox] está configurado como " "un botón de radio y está desmarcado." msgid "The check icon to display when the [CheckBox] is unchecked." msgstr "El check icon que aparece cuando el [CheckBox] está deseleccionado." msgid "" "The check icon to display when the [CheckBox] is unchecked and is disabled." msgstr "" "El icono de marca que se muestra cuando el [CheckBox] está desmarcado y " "desactivado." msgid "" "[CheckButton] is a toggle button displayed as a check field. It's similar to " "[CheckBox] in functionality, but it has a different appearance. To follow " "established UX patterns, it's recommended to use [CheckButton] when toggling " "it has an [b]immediate[/b] effect on something. For example, it can be used " "when pressing it shows or hides advanced settings, without asking the user to " "confirm this action.\n" "See also [BaseButton] which contains common properties and methods associated " "with this node." msgstr "" "[CheckButton] es un botón de alternancia mostrado como un campo de " "verificación. Es similar a [CheckBox] en funcionalidad, pero tiene una " "apariencia diferente. Para seguir los patrones de UX establecidos, se " "recomienda usar [CheckButton] cuando su alternancia tiene un efecto " "[b]inmediato[/b] en algo. Por ejemplo, puede usarse cuando al presionarlo se " "muestran u ocultan configuraciones avanzadas, sin pedir al usuario que " "confirme esta acción.\n" "Véase también [BaseButton], que contiene las propiedades y métodos comunes " "asociados con este nodo." msgid "The vertical offset used when rendering the toggle icons (in pixels)." msgstr "" "El desplazamiento vertical que se utiliza al renderizar los iconos de " "conmutación (en píxeles)." msgid "" "The icon to display when the [CheckButton] is checked (for left-to-right " "layouts)." msgstr "" "El icono que se muestra cuando el [CheckButton] está marcado (para diseños de " "izquierda a derecha)." msgid "" "The icon to display when the [CheckButton] is checked and disabled (for left-" "to-right layouts)." msgstr "" "El icono que se muestra cuando el [CheckButton] está marcado y desactivado " "(para diseños de izquierda a derecha)." msgid "" "The icon to display when the [CheckButton] is checked and disabled (for right-" "to-left layouts)." msgstr "" "El icono que se muestra cuando el [CheckButton] está marcado y desactivado " "(para diseños de derecha a izquierda)." msgid "" "The icon to display when the [CheckButton] is checked (for right-to-left " "layouts)." msgstr "" "El icono que se muestra cuando el [CheckButton] está marcado (para diseños de " "derecha a izquierda)." msgid "" "The icon to display when the [CheckButton] is unchecked (for left-to-right " "layouts)." msgstr "" "El icono que se muestra cuando el [CheckButton] está desmarcado (para diseños " "de izquierda a derecha)." msgid "" "The icon to display when the [CheckButton] is unchecked and disabled (for " "left-to-right layouts)." msgstr "" "El icono que se muestra cuando el [CheckButton] está desmarcado y desactivado " "(para diseños de izquierda a derecha)." msgid "" "The icon to display when the [CheckButton] is unchecked and disabled (for " "right-to-left layouts)." msgstr "" "El icono que se muestra cuando el [CheckButton] está desmarcado y desactivado " "(para diseños de derecha a izquierda)." msgid "" "The icon to display when the [CheckButton] is unchecked (for right-to-left " "layouts)." msgstr "" "El icono que se muestra cuando el [CheckButton] está desmarcado (para diseños " "de derecha a izquierda)." msgid "A 2D circle shape used for physics collision." msgstr "Una forma de círculo 2D usada para colisiones de físicas." msgid "" "A 2D circle shape, intended for use in physics. Usually used to provide a " "shape for a [CollisionShape2D].\n" "[b]Performance:[/b] [CircleShape2D] is fast to check collisions against. It " "is faster than [RectangleShape2D] and [CapsuleShape2D]." msgstr "" "Una forma de círculo 2D, destinada a usarse en físicas. Normalmente se usa " "para dar forma a un [CollisionShape2D].\n" "[b]Rendimiento:[/b] La comprobación de colisiones con [CircleShape2D] es " "rápida. Es más rápida que [RectangleShape2D] y [CapsuleShape2D]." msgid "The circle's radius." msgstr "El radio del círculo." msgid "A class information repository." msgstr "Un repositorio de información de clases." msgid "" "Provides access to metadata stored for every available engine class.\n" "[b]Note:[/b] Script-defined classes with [code]class_name[/code] are not part " "of [ClassDB], so they will not return reflection data such as a method or " "property list. However, [GDExtension]-defined classes [i]are[/i] part of " "[ClassDB], so they will return reflection data." msgstr "" "Proporciona acceso a los metadatos almacenados para cada clase disponible del " "motor.\n" "[b]Nota:[/b] Las clases definidas mediante scripts con [code]class_name[/" "code] no forman parte de [ClassDB], por lo que no devolverán datos de " "reflexión como listas de métodos o propiedades. Sin embargo, las clases " "definidas mediante [GDExtension] [i]sí[/i] forman parte de [ClassDB], por lo " "que devolverán datos de reflexión." msgid "" "Returns [code]true[/code] if objects can be instantiated from the specified " "[param class], otherwise returns [code]false[/code]." msgstr "" "Devuelve [code]true[/code] si se pueden instanciar objetos desde la [param " "class] especificada, de lo contrario devuelve [code]false[/code]." msgid "Calls a static method on a class." msgstr "Llama a un método estático en una clase." msgid "Returns whether the specified [param class] is available or not." msgstr "Devuelve si la [param class] especificada está disponible o no." msgid "Returns the API type of the specified [param class]." msgstr "Devuelve el tipo de API de la [param class] especificada." msgid "" "Returns an array with all the keys in [param enum] of [param class] or its " "ancestry." msgstr "" "Devuelve un array con todas las claves en el [param enum] de [param class] o " "su ascendencia." msgid "Returns an array with all the enums of [param class] or its ancestry." msgstr "" "Devuelve un array con todos los enums de [param class] o su ascendencia." msgid "" "Returns the value of the integer constant [param name] of [param class] or " "its ancestry. Always returns 0 when the constant could not be found." msgstr "" "Devuelve el valor de la constante entera [param name] de [param class] o su " "ascendencia. Siempre devuelve 0 si no se pudo encontrar la constante." msgid "" "Returns which enum the integer constant [param name] of [param class] or its " "ancestry belongs to." msgstr "" "Devuelve a qué enum pertenece la constante de tipo integer [param name] de " "[param class] o su ascendencia." msgid "" "Returns an array with the names all the integer constants of [param class] or " "its ancestry." msgstr "" "Devuelve un array con los nombres de todas las constantes de tipo integer de " "[param class] o su ascendencia." msgid "" "Returns the number of arguments of the method [param method] of [param class] " "or its ancestry if [param no_inheritance] is [code]false[/code]." msgstr "" "Devuelve el número de argumentos del método [param method] de [param class] o " "su ascendencia si [param no_inheritance] es [code]false[/code]." msgid "" "Returns an array with all the methods of [param class] or its ancestry if " "[param no_inheritance] is [code]false[/code]. Every element of the array is a " "[Dictionary] with the following keys: [code]args[/code], [code]default_args[/" "code], [code]flags[/code], [code]id[/code], [code]name[/code], [code]return: " "(class_name, hint, hint_string, name, type, usage)[/code].\n" "[b]Note:[/b] In exported release builds the debug info is not available, so " "the returned dictionaries will contain only method names." msgstr "" "Devuelve un array con todos los métodos de [param class] o su ascendencia si " "[param no_inheritance] es [code]false[/code]. Cada elemento del array es un " "[Dictionary] con las siguientes claves: [code]args[/code], " "[code]default_args[/code], [code]flags[/code], [code]id[/code], [code]name[/" "code], [code]return: (class_name, hint, hint_string, name, type, usage)[/" "code].\n" "[b]Nota:[/b] En las compilaciones de lanzamiento exportadas, la información " "de depuración no está disponible, por lo que los diccionarios devueltos solo " "contendrán los nombres de métodos." msgid "Returns the value of [param property] of [param object] or its ancestry." msgstr "" "Devuelve el valor de [param property] de [param object] o su ascendencia." msgid "" "Returns the default value of [param property] of [param class] or its " "ancestor classes." msgstr "" "Devuelve el valor por defecto de [param property] de [param class] o sus " "clases ascendentes." msgid "Returns the getter method name of [param property] of [param class]." msgstr "" "Devuelve el nombre del método getter de [param property] de [param class]." msgid "" "Returns an array with all the properties of [param class] or its ancestry if " "[param no_inheritance] is [code]false[/code]." msgstr "" "Devuelve un array con todas las propiedades de [param class] o su ascendencia " "si [param no_inheritance] es [code]false[/code]." msgid "Returns the setter method name of [param property] of [param class]." msgstr "" "Devuelve el nombre del método setter de [param property] de [param class]." msgid "" "Returns the [param signal] data of [param class] or its ancestry. The " "returned value is a [Dictionary] with the following keys: [code]args[/code], " "[code]default_args[/code], [code]flags[/code], [code]id[/code], [code]name[/" "code], [code]return: (class_name, hint, hint_string, name, type, usage)[/" "code]." msgstr "" "Devuelve los datos de la señal [param signal] de [param class] o su " "ascendencia. El valor devuelto es un [Dictionary] con las siguientes claves: " "[code]args[/code], [code]default_args[/code], [code]flags[/code], [code]id[/" "code], [code]name[/code], [code]return: (class_name, hint, hint_string, name, " "type, usage)[/code]." msgid "" "Returns an array with all the signals of [param class] or its ancestry if " "[param no_inheritance] is [code]false[/code]. Every element of the array is a " "[Dictionary] as described in [method class_get_signal]." msgstr "" "Devuelve un array con todas las señales de [param class] o su ascendencia si " "[param no_inheritance] es [code]false[/code]. Cada elemento del array es un " "[Dictionary] como se describe en [method class_get_signal]." msgid "" "Returns whether [param class] or its ancestry has an enum called [param name] " "or not." msgstr "" "Devuelve si [param class] o su ascendencia tiene un enum llamado [param name] " "o no." msgid "" "Returns whether [param class] or its ancestry has an integer constant called " "[param name] or not." msgstr "" "Devuelve si [param class] o su ascendencia tiene una constante de tipo " "integer llamada [param name] o no." msgid "" "Returns whether [param class] (or its ancestry if [param no_inheritance] is " "[code]false[/code]) has a method called [param method] or not." msgstr "" "Devuelve si [param class] (o su ascendencia si [param no_inheritance] es " "[code]false[/code]) tiene un método llamado [param method] o no." msgid "Sets [param property] value of [param object] to [param value]." msgstr "" "Establece el valor de la [param property] de [param object] a [param value]." msgid "" "Returns the names of all engine classes available.\n" "[b]Note:[/b] Script-defined classes with [code]class_name[/code] are not " "included in this list. Use [method ProjectSettings.get_global_class_list] to " "get a list of script-defined classes instead." msgstr "" "Devuelve los nombres de todas las clases disponibles en el motor .\n" "[b]Nota:[/b] Las clases definidas mediante scripts con [code]class_name[/" "code] no se incluyen en esta lista. Utiliza [method " "ProjectSettings.get_global_class_list] para obtener, en su lugar, una lista " "de las clases definidas mediante scripts." msgid "Returns the parent class of [param class]." msgstr "Devuelve la clase padre de [param class]." msgid "Creates an instance of [param class]." msgstr "Crea una instancia de [param class]." msgid "Returns whether this [param class] is enabled or not." msgstr "Devuelve si esta [param class] está habilitada o no." msgid "" "Returns whether [param class] (or its ancestor classes if [param " "no_inheritance] is [code]false[/code]) has an enum called [param enum] that " "is a bitfield." msgstr "" "Devuelve si [param class] (o sus clases ancestras si [param no_inheritance] " "es [code]false[/code]) tiene un enum llamado [param enum] que es un campo de " "bits." msgid "Returns whether [param inherits] is an ancestor of [param class] or not." msgstr "Devuelve si [param inherits] es un ancestro de [param class] o no." msgid "Native Core class type." msgstr "Tipo de clase nativa del núcleo." msgid "Native Editor class type." msgstr "Tipo de clase nativa del editor." msgid "GDExtension class type." msgstr "Tipo de clase de GDExtension." msgid "GDExtension Editor class type." msgstr "Tipo de clase de editor de GDExtension." msgid "Unknown class type." msgstr "Tipo de clase desconocido." msgid "A multiline text editor designed for editing code." msgstr "Un editor de texto multilínea diseñado para editar código." msgid "" "CodeEdit is a specialized [TextEdit] designed for editing plain text code " "files. It has many features commonly found in code editors such as line " "numbers, line folding, code completion, indent management, and string/comment " "management.\n" "[b]Note:[/b] Regardless of locale, [CodeEdit] will by default always use left-" "to-right text direction to correctly display source code." msgstr "" "CodeEdit es un [TextEdit] especializado, diseñado para editar archivos de " "código de texto plano. Cuenta con muchas características comunes en los " "editores de código, como números de línea, plegado de líneas, autocompletado " "de código, gestión de la sangría y gestión de strings/comentarios.\n" "[b]Nota:[/b] Independientemente de la configuración regional, [CodeEdit] por " "defecto siempre usará la dirección de texto de izquierda a derecha para " "mostrar correctamente el código fuente." msgid "" "Override this method to define how the selected entry should be inserted. If " "[param replace] is [code]true[/code], any existing text should be replaced." msgstr "" "Sobrescribe este método para definir cómo se debe insertar la entrada " "seleccionada. Si [param replace] es [code]true[/code], se debe reemplazar " "cualquier texto existente." msgid "" "Adds a brace pair.\n" "Both the start and end keys must be symbols. Only the start key has to be " "unique." msgstr "" "Añade un par de llaves.\n" "Tanto la clave de inicio como la de fin deben ser símbolos. Solo la clave de " "inicio tiene que ser única." msgid "" "Submits an item to the queue of potential candidates for the autocomplete " "menu. Call [method update_code_completion_options] to update the list.\n" "[param location] indicates location of the option relative to the location of " "the code completion query. See [enum CodeEdit.CodeCompletionLocation] for how " "to set this value.\n" "[b]Note:[/b] This list will replace all current candidates." msgstr "" "Envía un elemento a la cola de posibles candidatos para el menú de completado " "automático. Llama a [method update_code_completion_options] para actualizar " "la lista.\n" "[param location] indica la ubicación de la opción en relación con la " "ubicación de la consulta de completado automático de código. Véase [enum " "CodeEdit.CodeCompletionLocation] para saber cómo establecer este valor.\n" "[b]Nota:[/b] Esta lista reemplazará a todos los candidatos actuales." msgid "" "Adds a comment delimiter from [param start_key] to [param end_key]. Both keys " "should be symbols, and [param start_key] must not be shared with other " "delimiters.\n" "If [param line_only] is [code]true[/code] or [param end_key] is an empty " "[String], the region does not carry over to the next line." msgstr "" "Añade un delimitador de comentario desde [param start_key] hasta [param " "end_key]. Ambas claves deben ser símbolos, y [param start_key] no debe " "compartirse con otros delimitadores.\n" "Si [param line_only] es [code]true[/code] o [param end_key] es una [String] " "vacía, la región no se extiende a la siguiente línea." msgid "" "Defines a string delimiter from [param start_key] to [param end_key]. Both " "keys should be symbols, and [param start_key] must not be shared with other " "delimiters.\n" "If [param line_only] is [code]true[/code] or [param end_key] is an empty " "[String], the region does not carry over to the next line." msgstr "" "Define un delimitador de string desde [param start_key] hasta [param " "end_key]. Ambas claves deben ser símbolos, y [param start_key] no debe " "compartirse con otros delimitadores.\n" "Si [param line_only] es [code]true[/code] o [param end_key] es una [String] " "vacía, la región no se extiende a la siguiente línea." msgid "" "Returns [code]true[/code] if the given line is foldable. A line is foldable " "if it is the start of a valid code region (see [method " "get_code_region_start_tag]), if it is the start of a comment or string block, " "or if the next non-empty line is more indented (see [method " "TextEdit.get_indent_level])." msgstr "" "Devuelve [code]true[/code] si la línea dada se puede plegar. Una línea se " "puede plegar si es el inicio de una región de código válida (ver [method " "get_code_region_start_tag]), si es el inicio de un comentario o bloque de " "string, o si la siguiente línea no vacía está más indentada (ver [method " "TextEdit.get_indent_level])." msgid "Cancels the autocomplete menu." msgstr "Cancela el menú de completado automático." msgid "Clears all bookmarked lines." msgstr "Borra todas las líneas con marcadores." msgid "Clears all breakpointed lines." msgstr "Limpia todas las líneas con puntos de interrupción." msgid "Removes all comment delimiters." msgstr "Elimina todos los delimitadores de comentarios." msgid "Clears all executed lines." msgstr "Limpia todas las líneas ejecutadas." msgid "Removes all string delimiters." msgstr "Elimina todos los delimitadores de strings." msgid "" "Inserts the selected entry into the text. If [param replace] is [code]true[/" "code], any existing text is replaced rather than merged." msgstr "" "Inserta la entrada seleccionada en el texto. Si [param replace] es " "[code]true[/code], cualquier texto existente se reemplaza en lugar de " "fusionarse." msgid "" "Converts the indents of lines between [param from_line] and [param to_line] " "to tabs or spaces as set by [member indent_use_spaces].\n" "Values of [code]-1[/code] convert the entire text." msgstr "" "Convierte las indentaciones de las líneas entre [param from_line] y [param " "to_line] a tabulaciones o espacios según lo establecido por [member " "indent_use_spaces].\n" "Los valores de [code]-1[/code] convierten todo el texto." msgid "" "Creates a new code region with the selection. At least one single line " "comment delimiter have to be defined (see [method add_comment_delimiter]).\n" "A code region is a part of code that is highlighted when folded and can help " "organize your script.\n" "Code region start and end tags can be customized (see [method " "set_code_region_tags]).\n" "Code regions are delimited using start and end tags (respectively " "[code]region[/code] and [code]endregion[/code] by default) preceded by one " "line comment delimiter. (eg. [code]#region[/code] and [code]#endregion[/code])" msgstr "" "Crea una nueva región de código con la selección. Se debe definir al menos un " "delimitador de comentario de una sola línea (véase [method " "add_comment_delimiter]).\n" "Una región de código es una parte del código que se resalta cuando se pliega " "y puede ayudar a organizar tu script.\n" "Las etiquetas de inicio y fin de la región de código se pueden personalizar " "(ver [method set_code_region_tags]).\n" "Las regiones de código se delimitan mediante etiquetas de inicio y fin " "(respectivamente [code]region[/code] y [code]endregion[/code] por defecto) " "precedidas por un delimitador de comentario de una línea. (ej. [code]#region[/" "code] y [code]#endregion[/code])" msgid "Deletes all lines that are selected or have a caret on them." msgstr "" "Elimina todas las líneas que están seleccionadas o que tienen un cursor sobre " "ellas." msgid "" "If there is no selection, indentation is inserted at the caret. Otherwise, " "the selected lines are indented like [method indent_lines]. Equivalent to the " "[member ProjectSettings.input/ui_text_indent] action. The indentation " "characters used depend on [member indent_use_spaces] and [member indent_size]." msgstr "" "Si no hay selección, se inserta una indentación en el cursor. De lo " "contrario, las líneas seleccionadas se indentan como [method indent_lines]. " "Equivalente a la acción [member ProjectSettings.input/ui_text_indent]. Los " "caracteres de indentación utilizados dependen de [member indent_use_spaces] y " "[member indent_size]." msgid "" "Duplicates all lines currently selected with any caret. Duplicates the entire " "line beneath the current one no matter where the caret is within the line." msgstr "" "Duplica todas las líneas seleccionadas actualmente con cualquier cursor. " "Duplica toda la línea debajo de la actual, sin importar dónde se encuentre el " "cursor dentro de la línea." msgid "" "Duplicates all selected text and duplicates all lines with a caret on them." msgstr "" "Duplica todo el texto seleccionado y duplica todas las líneas que tengan un " "cursor sobre ellas." msgid "" "Folds all lines that are possible to be folded (see [method can_fold_line])." msgstr "" "Pliega todas las líneas que se pueden plegar (véase [method can_fold_line])." msgid "Folds the given line, if possible (see [method can_fold_line])." msgstr "Pliega la línea dada, si es posible (véase [method can_fold_line])." msgid "Gets the matching auto brace close key for [param open_key]." msgstr "" "Obtiene la llave de cierre automático de corchete coincidente para [param " "open_key]." msgid "Gets all bookmarked lines." msgstr "Obtiene todas las líneas con marcadores." msgid "Gets all breakpointed lines." msgstr "Obtiene todas las líneas con puntos de interrupción." msgid "" "Gets the completion option at [param index]. The return [Dictionary] has the " "following key-values:\n" "[code]kind[/code]: [enum CodeCompletionKind]\n" "[code]display_text[/code]: Text that is shown on the autocomplete menu.\n" "[code]insert_text[/code]: Text that is to be inserted when this item is " "selected.\n" "[code]font_color[/code]: Color of the text on the autocomplete menu.\n" "[code]icon[/code]: Icon to draw on the autocomplete menu.\n" "[code]default_value[/code]: Value of the symbol." msgstr "" "Obtiene la opción de completado en el [param index] indicado. El [Dictionary] " "devuelto tiene los siguientes pares clave-valor:\n" "[code]kind[/code]: [enum CodeCompletionKind]\n" "[code]display_text[/code]: Texto que se muestra en el menú de " "autocompletado.\n" "[code]insert_text[/code]: Texto que se insertará cuando se seleccione este " "elemento.\n" "[code]font_color[/code]: Color del texto en el menú de autocompletado.\n" "[code]icon[/code]: Icono que se dibujará en el menú de autocompletado.\n" "[code]default_value[/code]: Valor del símbolo." msgid "" "Gets all completion options, see [method get_code_completion_option] for " "return content." msgstr "" "Obtiene todas las opciones de completado automático, véase [method " "get_code_completion_option] para el contenido devuelto." msgid "Gets the index of the current selected completion option." msgstr "Obtiene el índice de la opción de completado automático seleccionada." msgid "Returns the code region end tag (without comment delimiter)." msgstr "" "Devuelve la etiqueta final de la región de código (sin delimitador de " "comentario)." msgid "Returns the code region start tag (without comment delimiter)." msgstr "" "Devuelve la etiqueta de inicio de la región de código (sin delimitador de " "comentario)." msgid "Gets the end key for a string or comment region index." msgstr "Obtiene la clave final para un índice de región de string o comentario." msgid "" "If [param line] [param column] is in a string or comment, returns the end " "position of the region. If not or no end could be found, both [Vector2] " "values will be [code]-1[/code]." msgstr "" "Si [param line] [param column] está en una string o comentario, devuelve la " "posición final de la región. Si no, o no se pudo encontrar un final, ambos " "valores de [Vector2] serán [code]-1[/code]." msgid "Gets the start key for a string or comment region index." msgstr "" "Obtiene la clave de inicio para un índice de región de string o comentario." msgid "" "If [param line] [param column] is in a string or comment, returns the start " "position of the region. If not or no start could be found, both [Vector2] " "values will be [code]-1[/code]." msgstr "" "Si [param line] [param column] está en una string o comentario, devuelve la " "posición inicial de la región. Si no, o no se pudo encontrar un inicio, ambos " "valores de [Vector2] serán [code]-1[/code]." msgid "Gets all executing lines." msgstr "Obtiene todas las líneas en ejecución." msgid "Returns all lines that are currently folded." msgstr "Devuelve todas las líneas que están actualmente plegadas." msgid "" "Returns the full text with char [code]0xFFFF[/code] at the caret location." msgstr "" "Devuelve el texto completo con el carácter [code]0xFFFF[/code] en la " "ubicación del cursor." msgid "" "Returns the full text with char [code]0xFFFF[/code] at the cursor location." msgstr "" "Devuelve el texto completo con el carácter [code]0xFFFF[/code] en la " "ubicación del cursor." msgid "" "Returns the full text with char [code]0xFFFF[/code] at the specified location." msgstr "" "Devuelve el texto completo con el carácter [code]0xFFFF[/code] en la " "ubicación especificada." msgid "Returns [code]true[/code] if close key [param close_key] exists." msgstr "" "Devuelve [code]true[/code] si la clave de cierre [param close_key] existe." msgid "Returns [code]true[/code] if open key [param open_key] exists." msgstr "" "Devuelve [code]true[/code] si la clave de apertura [param open_key] existe." msgid "Returns [code]true[/code] if comment [param start_key] exists." msgstr "Devuelve [code]true[/code] si el comentario [param start_key] existe." msgid "Returns [code]true[/code] if string [param start_key] exists." msgstr "Devuelve [code]true[/code] si la string [param start_key] existe." msgid "" "Indents all lines that are selected or have a caret on them. Uses spaces or a " "tab depending on [member indent_use_spaces]. See [method unindent_lines]." msgstr "" "Sangra todas las líneas seleccionadas o que tienen un cursor. Usa espacios o " "una tabulación según [member indent_use_spaces]. Véase [method " "unindent_lines]." msgid "" "Returns delimiter index if [param line] [param column] is in a comment. If " "[param column] is not provided, will return delimiter index if the entire " "[param line] is a comment. Otherwise [code]-1[/code]." msgstr "" "Devuelve el índice del delimitador si [param line] [param column] está en un " "comentario. Si no se proporciona [param column], devolverá el índice del " "delimitador si toda la [param line] es un comentario. De lo contrario, " "devuelve [code]-1[/code]." msgid "" "Returns the delimiter index if [param line] [param column] is in a string. If " "[param column] is not provided, will return the delimiter index if the entire " "[param line] is a string. Otherwise [code]-1[/code]." msgstr "" "Devuelve el índice del delimitador si [param line] [param column] está en una " "string. Si no se proporciona [param column], devolverá el índice del " "delimitador si toda la [param line] es una string. De lo contrario, devuelve " "[code]-1[/code]." msgid "" "Returns [code]true[/code] if the given line is bookmarked. See [method " "set_line_as_bookmarked]." msgstr "" "Devuelve [code]true[/code] si la línea dada tiene un marcador. Véase [method " "set_line_as_bookmarked]." msgid "" "Returns [code]true[/code] if the given line is breakpointed. See [method " "set_line_as_breakpoint]." msgstr "" "Devuelve [code]true[/code] si la línea dada tiene un punto de interrupción. " "Véase [method set_line_as_breakpoint]." msgid "" "Returns [code]true[/code] if the given line is a code region end. See [method " "set_code_region_tags]." msgstr "" "Devuelve [code]true[/code] si la línea dada es el final de una región de " "código. Véase [method set_code_region_tags]." msgid "" "Returns [code]true[/code] if the given line is a code region start. See " "[method set_code_region_tags]." msgstr "" "Devuelve [code]true[/code] si la línea dada es el inicio de una región de " "código. Véase [method set_code_region_tags]." msgid "" "Returns [code]true[/code] if the given line is marked as executing. See " "[method set_line_as_executing]." msgstr "" "Devuelve [code]true[/code] si la línea dada está marcada como en ejecución. " "Véase [method set_line_as_executing]." msgid "" "Returns [code]true[/code] if the given line is folded. See [method fold_line]." msgstr "" "Devuelve [code]true[/code] si la línea dada está plegada. Véase [method " "fold_line]." msgid "Moves all lines down that are selected or have a caret on them." msgstr "" "Mueve hacia abajo todas las líneas que estén seleccionadas o que tengan un " "cursor sobre ellas." msgid "Moves all lines up that are selected or have a caret on them." msgstr "" "Mueve hacia arriba todas las líneas que estén seleccionadas o que tengan un " "cursor sobre ellas." msgid "Removes the comment delimiter with [param start_key]." msgstr "Elimina el delimitador de comentario con [param start_key]." msgid "Removes the string delimiter with [param start_key]." msgstr "Elimina el delimitador de string con [param start_key]." msgid "" "Emits [signal code_completion_requested], if [param force] is [code]true[/" "code] will bypass all checks. Otherwise will check that the caret is in a " "word or in front of a prefix. Will ignore the request if all current options " "are of type file path, node path, or signal." msgstr "" "Emite [signal code_completion_requested], si [param force] es [code]true[/" "code] se omitirán todas las comprobaciones. De lo contrario, comprobará que " "el cursor está en una palabra o delante de un prefijo. Ignorará la petición " "si todas las opciones actuales son de tipo ruta de archivo, ruta de nodo o " "señal." msgid "Sets the current selected completion option." msgstr "Establece la opción de finalización seleccionada actualmente." msgid "Sets the code hint text. Pass an empty string to clear." msgstr "" "Establece el texto de sugerencia de código. Pasa una string vacía para " "borrarlo." msgid "" "If [code]true[/code], the code hint will draw below the main caret. If " "[code]false[/code], the code hint will draw above the main caret. See [method " "set_code_hint]." msgstr "" "Si es [code]true[/code], la sugerencia de código se dibujará debajo del " "cursor principal. Si es [code]false[/code], la sugerencia de código se " "dibujará encima del cursor principal. Véase [method set_code_hint]." msgid "Sets the code region start and end tags (without comment delimiter)." msgstr "" "Establece las etiquetas de inicio y fin de la región de código (sin " "delimitador de comentario)." msgid "" "Sets the given line as bookmarked. If [code]true[/code] and [member " "gutters_draw_bookmarks] is [code]true[/code], draws the [theme_item bookmark] " "icon in the gutter for this line. See [method get_bookmarked_lines] and " "[method is_line_bookmarked]." msgstr "" "Establece la línea dada como marcada. Si es [code]true[/code] y [member " "gutters_draw_bookmarks] es [code]true[/code], dibuja el icono [theme_item " "bookmark] en el medianil para esta línea. Véase [method get_bookmarked_lines] " "y [method is_line_bookmarked]." msgid "" "Sets the given line as a breakpoint. If [code]true[/code] and [member " "gutters_draw_breakpoints_gutter] is [code]true[/code], draws the [theme_item " "breakpoint] icon in the gutter for this line. See [method " "get_breakpointed_lines] and [method is_line_breakpointed]." msgstr "" "Establece la línea dada como un punto de interrupción. Si es [code]true[/" "code] y [member gutters_draw_breakpoints_gutter] es [code]true[/code], dibuja " "el icono [theme_item breakpoint] en el medianil para esta línea. Véase " "[method get_breakpointed_lines] y [method is_line_breakpointed]." msgid "" "Sets the given line as executing. If [code]true[/code] and [member " "gutters_draw_executing_lines] is [code]true[/code], draws the [theme_item " "executing_line] icon in the gutter for this line. See [method " "get_executing_lines] and [method is_line_executing]." msgstr "" "Establece la línea dada como en ejecución. Si es [code]true[/code] y [member " "gutters_draw_executing_lines] es [code]true[/code], dibuja el icono " "[theme_item executing_line] en el medianil para esta línea. Véase [method " "get_executing_lines] e [method is_line_executing]." msgid "Sets the symbol emitted by [signal symbol_validate] as a valid lookup." msgstr "" "Establece el símbolo emitido por [signal symbol_validate] como una búsqueda " "válida." msgid "Toggle the folding of the code block at the given line." msgstr "Cambia el plegado del bloque de código en la línea dada." msgid "Toggle the folding of the code block on all lines with a caret on them." msgstr "" "Alterna el plegado del bloque de código en todas las líneas que tienen un " "cursor sobre ellas." msgid "Unfolds all lines that are folded." msgstr "Despliega todas las líneas que están plegadas." msgid "" "Unfolds the given line if it is folded or if it is hidden under a folded line." msgstr "" "Despliega la línea dada si está plegada o si está oculta bajo una línea " "plegada." msgid "" "Unindents all lines that are selected or have a caret on them. Uses spaces or " "a tab depending on [member indent_use_spaces]. Equivalent to the [member " "ProjectSettings.input/ui_text_dedent] action. See [method indent_lines]." msgstr "" "Elimina la indentación de todas las líneas que están seleccionadas o tienen " "un cursor sobre ellas. Utiliza espacios o una tabulación dependiendo de " "[member indent_use_spaces]. Equivalente a la acción [member " "ProjectSettings.input/ui_text_dedent]. Véase [method indent_lines]." msgid "" "Submits all completion options added with [method " "add_code_completion_option]. Will try to force the autocomplete menu to " "popup, if [param force] is [code]true[/code].\n" "[b]Note:[/b] This will replace all current candidates." msgstr "" "Envía todas las opciones de completado añadidas con [method " "add_code_completion_option]. Intentará forzar la aparición del menú de " "autocompletado, si [param force] es [code]true[/code].\n" "[b]Nota:[/b] Esto reemplazará todos los candidatos actuales." msgid "" "If [code]true[/code], uses [member auto_brace_completion_pairs] to " "automatically insert the closing brace when the opening brace is inserted by " "typing or autocompletion. Also automatically removes the closing brace when " "using backspace on the opening brace." msgstr "" "Si es [code]true[/code], utiliza [member auto_brace_completion_pairs] para " "insertar automáticamente la llave de cierre cuando la llave de apertura se " "inserta escribiendo o mediante autocompletado. También elimina " "automáticamente la llave de cierre al usar la tecla de retroceso en la llave " "de apertura." msgid "" "If [code]true[/code], highlights brace pairs when the caret is on either one, " "using [member auto_brace_completion_pairs]. If matching, the pairs will be " "underlined. If a brace is unmatched, it is colored with [theme_item " "brace_mismatch_color]." msgstr "" "Si es [code]true[/code], resalta los pares de llaves cuando el cursor está en " "uno de ellos, utilizando [member auto_brace_completion_pairs]. Si coinciden, " "los pares se subrayarán. Si una llave no coincide, se colorea con [theme_item " "brace_mismatch_color]." msgid "" "Sets the brace pairs to be autocompleted. For each entry in the dictionary, " "the key is the opening brace and the value is the closing brace that matches " "it. A brace is a [String] made of symbols. See [member " "auto_brace_completion_enabled] and [member " "auto_brace_completion_highlight_matching]." msgstr "" "Establece los pares de llaves que se autocompletarán. Para cada entrada en el " "diccionario, la clave es la llave de apertura y el valor es la llave de " "cierre que coincide con ella. Una llave es una [String] hecha de símbolos. " "Véase [member auto_brace_completion_enabled] y [member " "auto_brace_completion_highlight_matching]." msgid "" "If [code]true[/code], the [member ProjectSettings.input/" "ui_text_completion_query] action requests code completion. To handle it, see " "[method _request_code_completion] or [signal code_completion_requested]." msgstr "" "Si es [code]true[/code], la acción [member ProjectSettings.input/" "ui_text_completion_query] solicita la finalización del código. Para " "manejarlo, véase [method _request_code_completion] o [signal " "code_completion_requested]." msgid "Sets prefixes that will trigger code completion." msgstr "Establece los prefijos que activarán el autocompletado de código." msgid "" "Sets the comment delimiters. All existing comment delimiters will be removed." msgstr "" "Establece los delimitadores de comentarios. Se eliminarán todos los " "delimitadores de comentarios existentes." msgid "" "Sets the string delimiters. All existing string delimiters will be removed." msgstr "" "Establece los delimitadores de string. Se eliminarán todos los delimitadores " "de string existentes." msgid "The minimum width in digits reserved for the line number gutter." msgstr "" "El ancho mínimo en dígitos reservado para el margen (gutter) de los números " "de línea." msgid "" "If [code]true[/code], an extra indent is automatically inserted when a new " "line is added and a prefix in [member indent_automatic_prefixes] is found. If " "a brace pair opening key is found, the matching closing brace will be moved " "to another new line (see [member auto_brace_completion_pairs])." msgstr "" "Si es [code]true[/code], se inserta una indentación adicional automáticamente " "cuando se añade una nueva línea y se encuentra un prefijo en [member " "indent_automatic_prefixes]. Si se encuentra una clave de apertura de un par " "de llaves, la llave de cierre correspondiente se moverá a otra línea nueva " "(véase [member auto_brace_completion_pairs])." msgid "" "Prefixes to trigger an automatic indent. Used when [member indent_automatic] " "is set to [code]true[/code]." msgstr "" "Prefijos para activar una indentación automática. Se utiliza cuando [member " "indent_automatic] se establece en [code]true[/code]." msgid "" "Size of the tabulation indent (one [kbd]Tab[/kbd] press) in characters. If " "[member indent_use_spaces] is enabled the number of spaces to use." msgstr "" "Tamaño de la indentación de tabulación (una pulsación de [kbd]Tab[/kbd]) en " "caracteres. Si [member indent_use_spaces] está habilitado, es el número de " "espacios a utilizar." msgid "Use spaces instead of tabs for indentation." msgstr "Usa espacios en lugar de tabulaciones para la indentación." msgid "" "If [code]true[/code], lines can be folded. Otherwise, line folding methods " "like [method fold_line] will not work and [method can_fold_line] will always " "return [code]false[/code]. See [member gutters_draw_fold_gutter]." msgstr "" "Si es [code]true[/code], las líneas pueden ser plegadas. De lo contrario, los " "métodos de plegado de líneas como [method fold_line] no funcionarán y [method " "can_fold_line] siempre devolverá [code]false[/code]. Véase [member " "gutters_draw_fold_gutter]." msgid "" "Draws vertical lines at the provided columns. The first entry is considered a " "main hard guideline and is drawn more prominently." msgstr "" "Dibuja líneas verticales en las columnas proporcionadas. La primera entrada " "se considera una guía principal y se dibuja de forma más prominente." msgid "" "Set when a validated word from [signal symbol_validate] is clicked, the " "[signal symbol_lookup] should be emitted." msgstr "" "Controla si se debe emitir la señal [signal symbol_lookup] al hacer clic en " "una palabra validada de [signal symbol_validate]." msgid "" "If [code]true[/code], the [signal symbol_hovered] signal is emitted when " "hovering over a word." msgstr "" "Si es [code]true[/code], la señal [signal symbol_hovered] se emite al pasar " "el cursor sobre una palabra." msgid "" "Emitted when a breakpoint is added or removed from a line. If the line is " "removed via backspace, a signal is emitted at the old line." msgstr "" "Emitida cuando se añade o elimina un punto de interrupción de una línea. Si " "la línea se elimina con la tecla de retroceso, se emite una señal en la línea " "antigua." msgid "" "Emitted when the user requests code completion. This signal will not be sent " "if [method _request_code_completion] is overridden or [member " "code_completion_enabled] is [code]false[/code]." msgstr "" "Emitida cuando el usuario solicita el completado de código. Esta señal no se " "enviará si se sobrescribe [method _request_code_completion] o si [member " "code_completion_enabled] es [code]false[/code]." msgid "" "Emitted when the user hovers over a symbol. Unlike [signal " "Control.mouse_entered], this signal is not emitted immediately, but when the " "cursor is over the symbol for [member ProjectSettings.gui/timers/" "tooltip_delay_sec] seconds.\n" "[b]Note:[/b] [member symbol_tooltip_on_hover] must be [code]true[/code] for " "this signal to be emitted." msgstr "" "Emitida cuando el usuario pasa el cursor sobre un símbolo. A diferencia de " "[signal Control.mouse_entered], esta señal no se emite inmediatamente, sino " "cuando el cursor está sobre el símbolo durante [member ProjectSettings.gui/" "timers/tooltip_delay_sec] segundos.\n" "[b]Nota:[/b] [member symbol_tooltip_on_hover] debe ser [code]true[/code] para " "que esta señal se emita." msgid "Emitted when the user has clicked on a valid symbol." msgstr "Emitida cuando el usuario ha hecho clic en un símbolo válido." msgid "" "Emitted when the user hovers over a symbol. The symbol should be validated " "and responded to, by calling [method set_symbol_lookup_word_as_valid].\n" "[b]Note:[/b] [member symbol_lookup_on_click] must be [code]true[/code] for " "this signal to be emitted." msgstr "" "Emitida cuando el usuario pasa el cursor sobre un símbolo. El símbolo debe " "ser validado y se debe responder a él, llamando a [method " "set_symbol_lookup_word_as_valid].\n" "[b]Nota:[/b] [member symbol_lookup_on_click] debe ser [code]true[/code] para " "que esta señal se emita." msgid "Marks the option as a class." msgstr "Marca la opción como una clase." msgid "Marks the option as a function." msgstr "Marca la opción como una función." msgid "Marks the option as a Godot signal." msgstr "Marca la opción como una señal de Godot." msgid "Marks the option as a variable." msgstr "Marca la opción como una variable." msgid "Marks the option as a member." msgstr "Marca la opción como un miembro." msgid "Marks the option as an enum entry." msgstr "Marca la opción como una entrada de enum." msgid "Marks the option as a constant." msgstr "Marca la opción como una constante." msgid "Marks the option as a Godot node path." msgstr "Marca la opción como una ruta de nodo de Godot." msgid "Marks the option as a file path." msgstr "Marca la opción como una ruta de archivo." msgid "Marks the option as unclassified or plain text." msgstr "Marca la opción como no clasificada o texto plano." msgid "" "The option is local to the location of the code completion query - e.g. a " "local variable. Subsequent value of location represent options from the outer " "class, the exact value represent how far they are (in terms of inner classes)." msgstr "" "La opción es local a la ubicación de la consulta de completado de código (p. " "ej., una variable local). Los valores subsecuentes de la ubicación " "representan opciones de la clase externa, el valor exacto representa cuán " "lejos están (en términos de clases internas)." msgid "" "The option is from the containing class or a parent class, relative to the " "location of the code completion query. Perform a bitwise OR with the class " "depth (e.g. [code]0[/code] for the local class, [code]1[/code] for the " "parent, [code]2[/code] for the grandparent, etc.) to store the depth of an " "option in the class or a parent class." msgstr "" "La opción es de la clase contenedora o una clase padre, relativa a la " "ubicación de la consulta de completado de código. Realiza un OR a nivel de " "bits con la profundidad de la clase (p. ej., [code]0[/code] para la clase " "local, [code]1[/code] para la padre, [code]2[/code] para la abuela, etc.) " "para almacenar la profundidad de una opción en la clase o en una clase padre." msgid "" "The option is from user code which is not local and not in a derived class " "(e.g. Autoload Singletons)." msgstr "" "La opción es de código de usuario que no es local y no está en una clase " "derivada (p. ej., Autoload Singletons)." msgid "" "The option is from other engine code, not covered by the other enum constants " "- e.g. built-in classes." msgstr "" "La opción es de otro código del motor, no cubierto por las otras constantes " "del enum (p. ej., clases incorporadas)." msgid "[Color] of the bookmark icon for bookmarked lines." msgstr "[Color] del icono de marcador para líneas con marcadores." msgid "[Color] of the text to highlight mismatched braces." msgstr "[Color] del texto para resaltar las llaves no coincidentes." msgid "[Color] of the breakpoint icon for bookmarked lines." msgstr "[Color] del icono de punto de interrupción para líneas marcadas." msgid "[Color] for all icons related to line folding." msgstr "[Color] para todos los iconos relacionados con el plegado de líneas." msgid "Sets the background [Color] for the code completion popup." msgstr "Establece [Color] del fondo para el popup de finalización de código." msgid "" "Background highlight [Color] for matching text in code completion options." msgstr "" "Color de resaltado de fondo para el texto coincidente en las opciones de " "completado automático de código." msgid "[Color] of the scrollbar in the code completion popup." msgstr "" "[Color] de la barra de desplazamiento en el popup de completado automático de " "código." msgid "[Color] of the scrollbar in the code completion popup when hovered." msgstr "" "[Color] de la barra de desplazamiento en el popup de completado automático de " "código al pasar el cursor por encima." msgid "" "Background highlight [Color] for the current selected option item in the code " "completion popup." msgstr "" "[Color] de resaltado de fondo para el elemento de opción actualmente " "seleccionado en el popup de completado automático de código." msgid "[Color] of the executing icon for executing lines." msgstr "[Color] del icono de ejecución para ejecutar líneas." msgid "[Color] of background line highlight for folded code region." msgstr "" "[Color] del resaltado de línea de fondo para la región de código plegada." msgid "" "[Color] of the main line length guideline, secondary guidelines will have 50% " "alpha applied." msgstr "" "[Color] de la guía principal de longitud de línea, a las guías secundarias se " "les aplicará un 50% de alfa." msgid "Sets the [Color] of line numbers." msgstr "Establece el [Color] de los números de línea." msgid "" "Max number of options to display in the code completion popup at any one time." msgstr "" "Número máximo de opciones a mostrar en el popup de completado automático de " "código en cualquier momento." msgid "" "Max width of options in the code completion popup. Options longer than this " "will be cut off." msgstr "" "Ancho máximo de las opciones en el popup de completado automático de código. " "Las opciones más largas que esto serán recortadas." msgid "Width of the scrollbar in the code completion popup." msgstr "" "Ancho de la barra de desplazamiento en el popup de completado automático de " "código." msgid "" "Background panel for the color preview box in autocompletion (visible when " "the color is translucent)." msgstr "" "Panel de fondo para el cuadro de vista previa de color en el completado " "automático (visible cuando el color es translúcido)." msgid "Sets a custom [Texture2D] to draw at the end of a folded line." msgstr "" "Establece una [Texture2D] personalizada para dibujar al final de una línea " "plegada." msgid "[StyleBox] for the code completion popup." msgstr "[StyleBox] para el popup de finalización de código." msgid "A syntax highlighter intended for code." msgstr "Un resaltador de sintaxis destinado al código." msgid "" "By adjusting various properties of this resource, you can change the colors " "of strings, comments, numbers, and other text patterns inside a [TextEdit] " "control." msgstr "" "Ajustando varias propiedades de este recurso, puedes cambiar los colores de " "las strings, comentarios, números y otros patrones de texto dentro de un " "control [TextEdit]." msgid "" "Adds a color region (such as for comments or strings) from [param start_key] " "to [param end_key]. Both keys should be symbols, and [param start_key] must " "not be shared with other delimiters.\n" "If [param line_only] is [code]true[/code] or [param end_key] is an empty " "[String], the region does not carry over to the next line." msgstr "" "Añade una región de color (como para comentarios o strings) desde [param " "start_key] hasta [param end_key]. Ambas claves deben ser símbolos, y [param " "start_key] no debe ser compartida con otros delimitadores.\n" "Si [param line_only] es [code]true[/code] o [param end_key] es una [String] " "vacía, la región no se extiende a la siguiente línea." msgid "" "Sets the color for a keyword.\n" "The keyword cannot contain any symbols except '_'." msgstr "" "Establece el color para una palabra clave.\n" "La palabra clave no puede contener símbolos excepto '_'." msgid "" "Sets the color for a member keyword.\n" "The member keyword cannot contain any symbols except '_'.\n" "It will not be highlighted if preceded by a '.'." msgstr "" "Establece el color para una palabra clave miembro.\n" "La palabra clave miembro no puede contener ningún símbolo excepto '_'.\n" "No se resaltará si está precedida por un '.'." msgid "Removes all color regions." msgstr "Elimina todas las regiones de color." msgid "Removes all keywords." msgstr "Elimina todas las palabras claves." msgid "Removes all member keywords." msgstr "Elimina todas las palabras clave de los miembros." msgid "Returns the color for a keyword." msgstr "Devuelve el color de una palabra clave." msgid "Returns the color for a member keyword." msgstr "Devuelve el color de una palabra clave miembro." msgid "" "Returns [code]true[/code] if the start key exists, else [code]false[/code]." msgstr "" "Devuelve [code]true[/code] si la clave de inicio existe, si no, devuelve " "[code]false[/code]." msgid "" "Returns [code]true[/code] if the keyword exists, else [code]false[/code]." msgstr "" "Devuelve [code]true[/code] si la palabra clave existe, si no, devuelve " "[code]false[/code]." msgid "" "Returns [code]true[/code] if the member keyword exists, else [code]false[/" "code]." msgstr "" "Devuelve [code]true[/code] si la palabra clave miembro existe, si no, " "devuelve [code]false[/code]." msgid "Removes the color region that uses that start key." msgstr "Elimina la región de color que usa esa clave de inicio." msgid "Removes the keyword." msgstr "Elimina la palabra clave." msgid "Removes the member keyword." msgstr "Elimina la palabra clave del miembro." msgid "" "Sets the color regions. All existing regions will be removed. The " "[Dictionary] key is the region start and end key, separated by a space. The " "value is the region color." msgstr "" "Establece las regiones de color. Se eliminarán todas las regiones existentes. " "La clave del [Dictionary] es la clave de inicio y fin de la región, separada " "por un espacio. El valor es el color de la región." msgid "" "Sets color for functions. A function is a non-keyword string followed by a " "'('." msgstr "" "Establece el color para las funciones. Una función es una string que no es " "palabra clave seguida de un '('." msgid "" "Sets the keyword colors. All existing keywords will be removed. The " "[Dictionary] key is the keyword. The value is the keyword color." msgstr "" "Establece los colores de las palabras clave. Se eliminarán todas las palabras " "clave existentes. La clave del [Dictionary] es la palabra clave. El valor es " "el color de la palabra clave." msgid "" "Sets the member keyword colors. All existing member keyword will be removed. " "The [Dictionary] key is the member keyword. The value is the member keyword " "color." msgstr "" "Establece los colores de las palabras clave miembro. Se eliminarán todas las " "palabras clave miembro existentes. La clave del [Dictionary] es la palabra " "clave miembro. El valor es el color de la palabra clave miembro." msgid "" "Sets color for member variables. A member variable is non-keyword, non-" "function string proceeded with a '.'." msgstr "" "Establece el color para las variables miembro. Una variable miembro es una " "string que no es palabra clave ni función, precedida por un '.'." msgid "Sets the color for numbers." msgstr "Establece el color de los números." msgid "Sets the color for symbols." msgstr "Establece el color de los símbolos." msgid "Abstract base class for 2D physics objects." msgstr "Clase base abstracta para objetos de física 2D." msgid "" "Abstract base class for 2D physics objects. [CollisionObject2D] can hold any " "number of [Shape2D]s for collision. Each shape must be assigned to a [i]shape " "owner[/i]. Shape owners are not nodes and do not appear in the editor, but " "are accessible through code using the [code]shape_owner_*[/code] methods.\n" "[b]Note:[/b] Only collisions between objects within the same canvas " "([Viewport] canvas or [CanvasLayer]) are supported. The behavior of " "collisions between objects in different canvases is undefined." msgstr "" "Clase base abstracta para objetos físicos 2D. [CollisionObject2D] puede " "contener cualquier número de [Shape2D]s para la colisión. Cada forma debe ser " "asignada a un [i]propietario de la forma[/i]. Los propietarios de la forma no " "son nodos y no aparecen en el editor, pero son accesibles a través del código " "usando los métodos [code]shape_owner_*[/code].\n" "[b]Nota:[/b] Solo se admiten colisiones entre objetos dentro del mismo canvas " "([Viewport] o [CanvasLayer]). El comportamiento de las colisiones entre " "objetos en diferentes canvas no está definido." msgid "" "Accepts unhandled [InputEvent]s. [param shape_idx] is the child index of the " "clicked [Shape2D]. Connect to [signal input_event] to easily pick up these " "events.\n" "[b]Note:[/b] [method _input_event] requires [member input_pickable] to be " "[code]true[/code] and at least one [member collision_layer] bit to be set." msgstr "" "Acepta [InputEvent]s no gestionados. [param shape_idx] es el índice hijo del " "[Shape2D] clickeado. Conéctate a la [signal input_event] para capturar " "fácilmente estos eventos.\n" "[b]Nota:[/b] [method _input_event] requiere que [member input_pickable] sea " "[code]true[/code] y que al menos un bit de [member collision_layer] esté " "establecido." msgid "" "Called when the mouse pointer enters any of this object's shapes. Requires " "[member input_pickable] to be [code]true[/code] and at least one [member " "collision_layer] bit to be set. Note that moving between different shapes " "within a single [CollisionObject2D] won't cause this function to be called." msgstr "" "Llamado cuando el puntero del ratón entra en cualquiera de las formas de este " "objeto. Requiere que [member input_pickable] sea [code]true[/code] y que al " "menos un bit de [member collision_layer] esté establecido. Ten en cuenta que " "moverte entre diferentes formas dentro de un único [CollisionObject2D] no " "causará que esta función sea llamada." msgid "" "Called when the mouse pointer exits all this object's shapes. Requires " "[member input_pickable] to be [code]true[/code] and at least one [member " "collision_layer] bit to be set. Note that moving between different shapes " "within a single [CollisionObject2D] won't cause this function to be called." msgstr "" "Llamado cuando el puntero del ratón sale de todas las formas de este objeto. " "Requiere que [member input_pickable] sea [code]true[/code] y que al menos un " "bit de [member collision_layer] esté establecido. Ten en cuenta que moverte " "entre diferentes formas dentro de un único [CollisionObject2D] no causará que " "esta función sea llamada." msgid "" "Called when the mouse pointer enters any of this object's shapes or moves " "from one shape to another. [param shape_idx] is the child index of the newly " "entered [Shape2D]. Requires [member input_pickable] to be [code]true[/code] " "and at least one [member collision_layer] bit to be called." msgstr "" "Llamado cuando el puntero del ratón entra en cualquiera de las formas de este " "objeto o se mueve de una forma a otra. [param shape_idx] es el índice del " "hijo [Shape2D] recién entrado. Requiere que [member input_pickable] sea " "[code]true[/code] y que al menos un bit de [member collision_layer] esté " "establecido." msgid "" "Called when the mouse pointer exits any of this object's shapes. [param " "shape_idx] is the child index of the exited [Shape2D]. Requires [member " "input_pickable] to be [code]true[/code] and at least one [member " "collision_layer] bit to be called." msgstr "" "Llamado cuando el puntero del ratón sale de cualquiera de las formas de este " "objeto. [param shape_idx] es el índice hijo del [Shape2D] que se ha salido. " "Requiere que [member input_pickable] sea [code]true[/code] y al menos un bit " "de [member collision_layer] esté establecido." msgid "" "Creates a new shape owner for the given object. Returns [code]owner_id[/code] " "of the new owner for future reference." msgstr "" "Crea un nuevo dueño de la forma para el objeto dado. Devuelve [code]owner_id[/" "code] del nuevo propietario para futuras referencias." msgid "" "Returns whether or not the specified layer of the [member collision_layer] is " "enabled, given a [param layer_number] between 1 and 32." msgstr "" "Devuelve si la capa especificada de [member collision_layer] está habilitada " "o no, dado un [param layer_number] entre 1 y 32." msgid "" "Returns whether or not the specified layer of the [member collision_mask] is " "enabled, given a [param layer_number] between 1 and 32." msgstr "" "Devuelve si la capa especificada de [member collision_mask] está habilitada o " "no, dado un [param layer_number] entre 1 y 32." msgid "Returns the object's [RID]." msgstr "Devuelve el [RID] del objeto." msgid "" "Returns the [code]one_way_collision_margin[/code] of the shape owner " "identified by given [param owner_id]." msgstr "" "Devuelve el [code]one_way_collision_margin[/code] del propietario de la forma " "identificado por el [param owner_id] dado." msgid "" "Returns an [Array] of [code]owner_id[/code] identifiers. You can use these " "ids in other methods that take [code]owner_id[/code] as an argument." msgstr "" "Devuelve un [Array] de identificadores [code]owner_id[/code]. Puedes usar " "estos identificadores en otros métodos que toman [code]owner_id[/code] como " "argumento." msgid "If [code]true[/code], the shape owner and its shapes are disabled." msgstr "" "Si es [code]true[/code], el propietario de la forma y sus formas se " "desactivan." msgid "" "Returns [code]true[/code] if collisions for the shape owner originating from " "this [CollisionObject2D] will not be reported to collided with " "[CollisionObject2D]s." msgstr "" "Devuelve [code]true[/code] si las colisiones para el propietario de la forma " "originadas por este [CollisionObject2D] no serán reportadas como colisionadas " "con los [CollisionObject2D]s." msgid "Removes the given shape owner." msgstr "Elimina al dueño de la forma dada." msgid "" "Based on [param value], enables or disables the specified layer in the " "[member collision_layer], given a [param layer_number] between 1 and 32." msgstr "" "Basado en [param value], habilita o deshabilita la capa especificada en " "[member collision_layer], dado un [param layer_number] entre 1 y 32." msgid "" "Based on [param value], enables or disables the specified layer in the " "[member collision_mask], given a [param layer_number] between 1 and 32." msgstr "" "Basado en [param value], habilita o deshabilita la capa especificada en " "[member collision_mask], dado un [param layer_number] entre 1 y 32." msgid "Returns the [code]owner_id[/code] of the given shape." msgstr "Devuelve el [code]owner_id[/code] de la forma dada." msgid "Adds a [Shape2D] to the shape owner." msgstr "Añade un [Shape2D] al dueño de la forma." msgid "Removes all shapes from the shape owner." msgstr "Elimina todas las formas del dueño de la forma." msgid "Returns the parent object of the given shape owner." msgstr "Devuelve el objeto padre del propietario de la forma dada." msgid "Returns the [Shape2D] with the given ID from the given shape owner." msgstr "" "Devuelve la [Shape2D] con el ID dado del propietario de la forma especificado." msgid "Returns the number of shapes the given shape owner contains." msgstr "" "Devuelve el número de formas que contiene el propietario de la forma dada." msgid "" "Returns the child index of the [Shape2D] with the given ID from the given " "shape owner." msgstr "" "Devuelve el índice hijo de la [Shape2D] con el ID dado del propietario de la " "forma especificado." msgid "Returns the shape owner's [Transform2D]." msgstr "Devuelve la forma del dueño [Transform2D]." msgid "Removes a shape from the given shape owner." msgstr "Quita una forma del dueño de la forma dada." msgid "If [code]true[/code], disables the given shape owner." msgstr "Si es [code]true[/code], deshabilita al dueño de la forma dada." msgid "" "If [param enable] is [code]true[/code], collisions for the shape owner " "originating from this [CollisionObject2D] will not be reported to collided " "with [CollisionObject2D]s." msgstr "" "Si [param enable] es [code]true[/code], las colisiones para el propietario de " "la forma que se originen en este [CollisionObject2D] no se reportarán a los " "[CollisionObject2D] con los que colisione." msgid "" "Sets the [code]one_way_collision_margin[/code] of the shape owner identified " "by given [param owner_id] to [param margin] pixels." msgstr "" "Establece el [code]one_way_collision_margin[/code] del propietario de la " "forma identificado por el [param owner_id] dado a [param margin] píxeles." msgid "Sets the [Transform2D] of the given shape owner." msgstr "Establece la [Transform2D] del propietario de la forma dada." msgid "" "The physics layers this CollisionObject2D is in. Collision objects can exist " "in one or more of 32 different layers. See also [member collision_mask].\n" "[b]Note:[/b] Object A can detect a contact with object B only if object B is " "in any of the layers that object A scans. See [url=$DOCS_URL/tutorials/" "physics/physics_introduction.html#collision-layers-and-masks]Collision layers " "and masks[/url] in the documentation for more information." msgstr "" "Las capas de físicas en las que se encuentra este CollisionObject2D. Los " "objetos de colisión pueden existir en una o más de 32 capas diferentes. Ver " "también [member collision_mask].\n" "[b]Nota:[/b] Un objeto A puede detectar un contacto con un objeto B solo si " "el objeto B está en alguna de las capas que el objeto A escanea. Para más " "información, Véase [url=$DOCS_URL/tutorials/physics/" "physics_introduction.html#collision-layers-and-masks]Capas y máscaras de " "colisión[/url] en la documentación." msgid "" "The physics layers this CollisionObject2D scans. Collision objects can scan " "one or more of 32 different layers. See also [member collision_layer].\n" "[b]Note:[/b] Object A can detect a contact with object B only if object B is " "in any of the layers that object A scans. See [url=$DOCS_URL/tutorials/" "physics/physics_introduction.html#collision-layers-and-masks]Collision layers " "and masks[/url] in the documentation for more information." msgstr "" "Las capas de físicas que este CollisionObject2D escanea. Los objetos de " "colisión pueden escanear una o más de 32 capas diferentes. Véase también " "[member collision_layer].\n" "[b]Nota:[/b] Un objeto A puede detectar un contacto con un objeto B solo si " "el objeto B está en alguna de las capas que el objeto A escanea. Para más " "información, Véase [url=$DOCS_URL/tutorials/physics/" "physics_introduction.html#collision-layers-and-masks]Capas y máscaras de " "colisión[/url] en la documentación." msgid "" "The priority used to solve colliding when occurring penetration. The higher " "the priority is, the lower the penetration into the object will be. This can " "for example be used to prevent the player from breaking through the " "boundaries of a level." msgstr "" "La prioridad usada para resolver colisiones cuando ocurre penetración. Cuanto " "mayor sea la prioridad, menor será la penetración en el objeto. Esto puede " "usarse, por ejemplo, para evitar que el jugador atraviese los límites de un " "nivel." msgid "" "Defines the behavior in physics when [member Node.process_mode] is set to " "[constant Node.PROCESS_MODE_DISABLED]." msgstr "" "Define el comportamiento en la física cuando [member Node.process_mode] se " "establece a [constant Node.PROCESS_MODE_DISABLED]." msgid "" "If [code]true[/code], this object is pickable. A pickable object can detect " "the mouse pointer entering/leaving, and if the mouse is inside it, report " "input events. Requires at least one [member collision_layer] bit to be set." msgstr "" "Si es [code]true[/code], este objeto es seleccionable. Un objeto " "seleccionable puede detectar la entrada/salida del puntero del ratón y, si el " "ratón está dentro de él, informar de los eventos de entrada. Requiere que al " "menos un bit de [member collision_layer] esté establecido." msgid "" "Emitted when an input event occurs. Requires [member input_pickable] to be " "[code]true[/code] and at least one [member collision_layer] bit to be set. " "See [method _input_event] for details." msgstr "" "Emitida cuando ocurre un evento de entrada. Requiere que [member " "input_pickable] sea [code]true[/code] y que al menos un bit de [member " "collision_layer] esté establecido. Véase [method _input_event] para más " "detalles." msgid "" "Emitted when the mouse pointer enters any of this object's shapes. Requires " "[member input_pickable] to be [code]true[/code] and at least one [member " "collision_layer] bit to be set. Note that moving between different shapes " "within a single [CollisionObject2D] won't cause this signal to be emitted.\n" "[b]Note:[/b] Due to the lack of continuous collision detection, this signal " "may not be emitted in the expected order if the mouse moves fast enough and " "the [CollisionObject2D]'s area is small. This signal may also not be emitted " "if another [CollisionObject2D] is overlapping the [CollisionObject2D] in " "question." msgstr "" "Emitida cuando el puntero del ratón entra en cualquiera de las formas de este " "objeto. Requiere que [member input_pickable] sea [code]true[/code] y que al " "menos un bit de [member collision_layer] esté establecido. Ten en cuenta que " "moverse entre diferentes formas dentro de un único [CollisionObject2D] no " "provocará que esta señal se emita.\n" "[b]Nota:[/b] Debido a la falta de detección de colisión continua, esta señal " "puede no emitirse en el orden esperado si el ratón se mueve lo " "suficientemente rápido y el área del [CollisionObject2D] es pequeña. Esta " "señal también puede no emitirse si otro [CollisionObject2D] está solapando al " "[CollisionObject2D] en cuestión." msgid "" "Emitted when the mouse pointer exits all this object's shapes. Requires " "[member input_pickable] to be [code]true[/code] and at least one [member " "collision_layer] bit to be set. Note that moving between different shapes " "within a single [CollisionObject2D] won't cause this signal to be emitted.\n" "[b]Note:[/b] Due to the lack of continuous collision detection, this signal " "may not be emitted in the expected order if the mouse moves fast enough and " "the [CollisionObject2D]'s area is small. This signal may also not be emitted " "if another [CollisionObject2D] is overlapping the [CollisionObject2D] in " "question." msgstr "" "Emitida cuando el puntero del ratón sale de todas las formas de este objeto. " "Requiere que [member input_pickable] sea [code]true[/code] y que al menos un " "bit de [member collision_layer] esté establecido. Ten en cuenta que moverse " "entre diferentes formas dentro de un único [CollisionObject2D] no provocará " "que esta señal se emita.\n" "[b]Nota:[/b] Debido a la falta de detección de colisión continua, esta señal " "puede no emitirse en el orden esperado si el ratón se mueve lo " "suficientemente rápido y el área del [CollisionObject2D] es pequeña. Esta " "señal también puede no emitirse si otro [CollisionObject2D] está solapando al " "[CollisionObject2D] en cuestión." msgid "" "Emitted when the mouse pointer enters any of this object's shapes or moves " "from one shape to another. [param shape_idx] is the child index of the newly " "entered [Shape2D]. Requires [member input_pickable] to be [code]true[/code] " "and at least one [member collision_layer] bit to be set." msgstr "" "Emitida cuando el puntero del ratón entra en cualquiera de las formas de este " "objeto o se mueve de una forma a otra. [param shape_idx] es el índice hijo de " "la [Shape2D] recién entrada. Requiere que [member input_pickable] sea " "[code]true[/code] y que al menos un bit de [member collision_layer] esté " "establecido." msgid "" "Emitted when the mouse pointer exits any of this object's shapes. [param " "shape_idx] is the child index of the exited [Shape2D]. Requires [member " "input_pickable] to be [code]true[/code] and at least one [member " "collision_layer] bit to be set." msgstr "" "Emitida cuando el puntero del ratón sale de cualquiera de las formas de este " "objeto. [param shape_idx] es el índice hijo de la [Shape2D] de la que se ha " "salido. Requiere que [member input_pickable] sea [code]true[/code] y que al " "menos un bit de [member collision_layer] esté establecido." msgid "" "When [member Node.process_mode] is set to [constant " "Node.PROCESS_MODE_DISABLED], remove from the physics simulation to stop all " "physics interactions with this [CollisionObject2D].\n" "Automatically re-added to the physics simulation when the [Node] is processed " "again." msgstr "" "Cuando [member Node.process_mode] se establece en [constant " "Node.PROCESS_MODE_DISABLED], se elimina de la simulación de físicas para " "detener todas las interacciones de físicas con este [CollisionObject2D].\n" "Se vuelve a añadir automáticamente a la simulación de físicas cuando el " "[Node] se procesa de nuevo." msgid "" "When [member Node.process_mode] is set to [constant " "Node.PROCESS_MODE_DISABLED], make the body static. Doesn't affect [Area2D]. " "[PhysicsBody2D] can't be affected by forces or other bodies while static.\n" "Automatically set [PhysicsBody2D] back to its original mode when the [Node] " "is processed again." msgstr "" "Cuando [member Node.process_mode] se establece en [constant " "Node.PROCESS_MODE_DISABLED], hace que el cuerpo sea estático. No afecta a " "[Area2D]. Un [PhysicsBody2D] no puede ser afectado por fuerzas u otros " "cuerpos mientras es estático.\n" "Automáticamente devuelve el [PhysicsBody2D] a su modo original cuando el " "[Node] se procesa de nuevo." msgid "" "When [member Node.process_mode] is set to [constant " "Node.PROCESS_MODE_DISABLED], do not affect the physics simulation." msgstr "" "Cuando [member Node.process_mode] se establece en [constant " "Node.PROCESS_MODE_DISABLED], no afecta a la simulación de físicas." msgid "Abstract base class for 3D physics objects." msgstr "Clase base abstracta para objetos de física 3D." msgid "" "Abstract base class for 3D physics objects. [CollisionObject3D] can hold any " "number of [Shape3D]s for collision. Each shape must be assigned to a [i]shape " "owner[/i]. Shape owners are not nodes and do not appear in the editor, but " "are accessible through code using the [code]shape_owner_*[/code] methods.\n" "[b]Warning:[/b] With a non-uniform scale, this node will likely not behave as " "expected. It is advised to keep its scale the same on all axes and adjust its " "collision shape(s) instead." msgstr "" "Clase base abstracta para objetos de físicas 3D. Un [CollisionObject3D] puede " "contener cualquier número de [Shape3D]s para la colisión. Cada forma debe ser " "asignada a un [i]propietario de forma[/i]. Los propietarios de formas no son " "nodos y no aparecen en el editor, pero son accesibles a través de código " "usando los métodos [code]shape_owner_*[/code].\n" "[b]Advertencia:[/b] Con una escala no uniforme, este nodo probablemente no se " "comportará como se espera. Se recomienda mantener su escala igual en todos " "los ejes y en su lugar ajustar su(s) forma(s) de colisión." msgid "" "Receives unhandled [InputEvent]s. [param event_position] is the location in " "world space of the mouse pointer on the surface of the shape with index " "[param shape_idx] and [param normal] is the normal vector of the surface at " "that point. Connect to the [signal input_event] signal to easily pick up " "these events.\n" "[b]Note:[/b] [method _input_event] requires [member input_ray_pickable] to be " "[code]true[/code] and at least one [member collision_layer] bit to be set." msgstr "" "Recibe [InputEvent]s no manejados. [param event_position] es la ubicación en " "el espacio del mundo del puntero del ratón en la superficie de la forma con " "índice [param shape_idx] y [param normal] es el vector normal de la " "superficie en ese punto. Conéctate a la señal [signal input_event] para " "recoger fácilmente estos eventos.\n" "[b]Nota:[/b] [method _input_event] requiere que [member input_ray_pickable] " "sea [code]true[/code] y que al menos un bit de [member collision_layer] esté " "establecido." msgid "" "Called when the mouse pointer enters any of this object's shapes. Requires " "[member input_ray_pickable] to be [code]true[/code] and at least one [member " "collision_layer] bit to be set. Note that moving between different shapes " "within a single [CollisionObject3D] won't cause this function to be called." msgstr "" "Se llama cuando el puntero del ratón entra en cualquiera de las formas de " "este objeto. Requiere que [member input_ray_pickable] sea [code]true[/code] y " "que al menos un bit de [member collision_layer] esté establecido. Ten en " "cuenta que moverse entre diferentes formas dentro de un único " "[CollisionObject3D] no provocará que se llame a esta función." msgid "" "Called when the mouse pointer exits all this object's shapes. Requires " "[member input_ray_pickable] to be [code]true[/code] and at least one [member " "collision_layer] bit to be set. Note that moving between different shapes " "within a single [CollisionObject3D] won't cause this function to be called." msgstr "" "Se llama cuando el puntero del ratón sale de todas las formas de este objeto. " "Requiere que [member input_ray_pickable] sea [code]true[/code] y que al menos " "un bit de [member collision_layer] esté establecido. Ten en cuenta que " "moverse entre diferentes formas dentro de un único [CollisionObject3D] no " "provocará que se llame a esta función." msgid "Adds a [Shape3D] to the shape owner." msgstr "Agrega una [Shape3D] al propietario de la forma." msgid "Returns the [Shape3D] with the given ID from the given shape owner." msgstr "Devuelve la [Shape3D] con el ID dado del propietario de la forma dado." msgid "" "Returns the child index of the [Shape3D] with the given ID from the given " "shape owner." msgstr "" "Devuelve el índice de hijo de la [Shape3D] con el ID dado del propietario de " "forma dado." msgid "Returns the shape owner's [Transform3D]." msgstr "Devuelve el [Transform3D] del propietario de la forma." msgid "Sets the [Transform3D] of the given shape owner." msgstr "Establece la [Transform3D] del propietario de forma dado." msgid "" "The physics layers this CollisionObject3D [b]is in[/b]. Collision objects can " "exist in one or more of 32 different layers. See also [member " "collision_mask].\n" "[b]Note:[/b] Object A can detect a contact with object B only if object B is " "in any of the layers that object A scans. See [url=$DOCS_URL/tutorials/" "physics/physics_introduction.html#collision-layers-and-masks]Collision layers " "and masks[/url] in the documentation for more information." msgstr "" "Las capas de física en las que [b]está[/b] este [CollisionObject3D]. Los " "objetos de colisión pueden existir en una o más de 32 capas diferentes. Ver " "también [member collision_mask].\n" "[b]Nota:[/b] Un objeto A puede detectar un contacto con un objeto B solo si " "el objeto B está en cualquiera de las capas que el objeto A escanea. Véase " "[url=$DOCS_URL/tutorials/physics/physics_introduction.html#collision-layers-" "and-masks]Capas y máscaras de colisión[/url] en la documentación para más " "información." msgid "" "The physics layers this CollisionObject3D [b]scans[/b]. Collision objects can " "scan one or more of 32 different layers. See also [member collision_layer].\n" "[b]Note:[/b] Object A can detect a contact with object B only if object B is " "in any of the layers that object A scans. See [url=$DOCS_URL/tutorials/" "physics/physics_introduction.html#collision-layers-and-masks]Collision layers " "and masks[/url] in the documentation for more information." msgstr "" "Las capas de física que [b]escanea[/b] este [CollisionObject3D]. Los objetos " "de colisión pueden escanear una o más de 32 capas diferentes. Véase también " "[member collision_layer].\n" "[b]Nota:[/b] Un objeto A puede detectar un contacto con un objeto B solo si " "el objeto B está en cualquiera de las capas que el objeto A escanea. Véase " "[url=$DOCS_URL/tutorials/physics/physics_introduction.html#collision-layers-" "and-masks]Capas y máscaras de colisión[/url] en la documentación para más " "información." msgid "" "If [code]true[/code], the [CollisionObject3D] will continue to receive input " "events as the mouse is dragged across its shapes." msgstr "" "Si es [code]true[/code], el [CollisionObject3D] continuará recibiendo eventos " "de entrada mientras el ratón se arrastra sobre sus formas." msgid "" "Emitted when the object receives an unhandled [InputEvent]. [param " "event_position] is the location in world space of the mouse pointer on the " "surface of the shape with index [param shape_idx] and [param normal] is the " "normal vector of the surface at that point." msgstr "" "Emitida cuando el objeto recibe un [InputEvent] no gestionado. [param " "event_position] es la ubicación en el espacio del mundo del puntero del ratón " "sobre la superficie de la forma con el índice [param shape_idx], y [param " "normal] es el vector normal de la superficie en ese punto." msgid "" "Emitted when the mouse pointer enters any of this object's shapes. Requires " "[member input_ray_pickable] to be [code]true[/code] and at least one [member " "collision_layer] bit to be set.\n" "[b]Note:[/b] Due to the lack of continuous collision detection, this signal " "may not be emitted in the expected order if the mouse moves fast enough and " "the [CollisionObject3D]'s area is small. This signal may also not be emitted " "if another [CollisionObject3D] is overlapping the [CollisionObject3D] in " "question." msgstr "" "Emitida cuando el puntero del ratón entra en cualquiera de las formas de este " "objeto. Requiere que [member input_ray_pickable] sea [code]true[/code] y que " "al menos un bit de [member collision_layer] esté establecido.\n" "[b]Nota:[/b] Debido a la falta de detección continua de colisiones, esta " "señal puede no emitirse en el orden esperado si el ratón se mueve lo " "suficientemente rápido y el área del [CollisionObject3D] es pequeña. Puede " "que esta señal tampoco se emita si otro [CollisionObject3D] se superpone al " "[CollisionObject3D] en cuestión." msgid "" "Emitted when the mouse pointer exits all this object's shapes. Requires " "[member input_ray_pickable] to be [code]true[/code] and at least one [member " "collision_layer] bit to be set.\n" "[b]Note:[/b] Due to the lack of continuous collision detection, this signal " "may not be emitted in the expected order if the mouse moves fast enough and " "the [CollisionObject3D]'s area is small. This signal may also not be emitted " "if another [CollisionObject3D] is overlapping the [CollisionObject3D] in " "question." msgstr "" "Emitida cuando el puntero del ratón sale de todas las formas de este objeto. " "Requiere que [member input_ray_pickable] sea [code]true[/code] y que al menos " "un bit de [member collision_layer] esté establecido.\n" "[b]Nota:[/b] Debido a la falta de detección continua de colisiones, esta " "señal puede no emitirse en el orden esperado si el ratón se mueve lo " "suficientemente rápido y el área de [CollisionObject3D] es pequeña. Esta " "señal también puede no emitirse si otro [CollisionObject3D] se superpone al " "[CollisionObject3D] en cuestión." msgid "" "When [member Node.process_mode] is set to [constant " "Node.PROCESS_MODE_DISABLED], remove from the physics simulation to stop all " "physics interactions with this [CollisionObject3D].\n" "Automatically re-added to the physics simulation when the [Node] is processed " "again." msgstr "" "Cuando [member Node.process_mode] se establece en [constant " "Node.PROCESS_MODE_DISABLED], se elimina de la simulación física para detener " "todas las interacciones físicas con este [CollisionObject3D].\n" "Se vuelve a añadir automáticamente a la simulación física cuando el [Node] se " "procesa de nuevo." msgid "" "When [member Node.process_mode] is set to [constant " "Node.PROCESS_MODE_DISABLED], make the body static. Doesn't affect [Area3D]. " "[PhysicsBody3D] can't be affected by forces or other bodies while static.\n" "Automatically set [PhysicsBody3D] back to its original mode when the [Node] " "is processed again." msgstr "" "Cuando [member Node.process_mode] se establece en [constant " "Node.PROCESS_MODE_DISABLED], haz que el cuerpo sea estático. No afecta a " "[Area3D]. [PhysicsBody3D] no puede ser afectado por fuerzas u otros cuerpos " "mientras es estático.\n" "Automáticamente devuelve [PhysicsBody3D] a su modo original cuando el [Node] " "se procesa de nuevo." msgid "A node that provides a polygon shape to a [CollisionObject2D] parent." msgstr "" "Un nodo que proporciona una forma de polígono a un padre [CollisionObject2D]." msgid "" "A node that provides a polygon shape to a [CollisionObject2D] parent and " "allows it to be edited. The polygon can be concave or convex. This can give a " "detection shape to an [Area2D], turn a [PhysicsBody2D] into a solid object, " "or give a hollow shape to a [StaticBody2D].\n" "[b]Warning:[/b] A non-uniformly scaled [CollisionPolygon2D] will likely not " "behave as expected. Make sure to keep its scale the same on all axes and " "adjust its polygon instead." msgstr "" "Un nodo que proporciona una forma de polígono a un padre [CollisionObject2D] " "y permite editarla. El polígono puede ser cóncavo o convexo. Esto puede dar " "una forma de detección a un [Area2D], convertir un [PhysicsBody2D] en un " "objeto sólido, o dar una forma hueca a un [StaticBody2D].\n" "[b]Advertencia:[/b] Un [CollisionPolygon2D] con una escala no uniforme " "probablemente no se comportará como se espera. Asegúrate de mantener su " "escala igual en todos los ejes y ajusta su polígono en su lugar." msgid "Collision build mode." msgstr "Modo de construcción de colisión." msgid "" "If [code]true[/code], no collisions will be detected. This property should be " "changed with [method Object.set_deferred]." msgstr "" "Si es [code]true[/code], no se detectarán colisiones. Esta propiedad debe " "cambiarse con [method Object.set_deferred]." msgid "" "The margin used for one-way collision (in pixels). Higher values will make " "the shape thicker, and work better for colliders that enter the polygon at a " "high velocity." msgstr "" "El margen utilizado para la colisión en un sentido (en píxeles). Valores más " "altos harán la forma más gruesa, y funcionará mejor para los colisionadores " "que entran en el polígono a alta velocidad." msgid "" "Collisions will include the polygon and its contained area. In this mode the " "node has the same effect as several [ConvexPolygonShape2D] nodes, one for " "each convex shape in the convex decomposition of the polygon (but without the " "overhead of multiple nodes)." msgstr "" "Las colisiones incluirán el polígono y su área contenida. En este modo, el " "nodo tiene el mismo efecto que varios nodos [ConvexPolygonShape2D], uno para " "cada forma convexa en la descomposición convexa del polígono (pero sin la " "sobrecarga de múltiples nodos)." msgid "" "Collisions will only include the polygon edges. In this mode the node has the " "same effect as a single [ConcavePolygonShape2D] made of segments, with the " "restriction that each segment (after the first one) starts where the previous " "one ends, and the last one ends where the first one starts (forming a closed " "but hollow polygon)." msgstr "" "Las colisiones solo incluirán los bordes del polígono. En este modo, el nodo " "tiene el mismo efecto que un único [ConcavePolygonShape2D] hecho de " "segmentos, con la restricción de que cada segmento (después del primero) " "comienza donde termina el anterior, y el último termina donde comienza el " "primero (formando un polígono cerrado pero hueco)." msgid "" "A node that provides a thickened polygon shape (a prism) to a " "[CollisionObject3D] parent." msgstr "" "Un nodo que proporciona una forma de polígono engrosada (un prisma) a un " "padre [CollisionObject3D]." msgid "" "A node that provides a thickened polygon shape (a prism) to a " "[CollisionObject3D] parent and allows it to be edited. The polygon can be " "concave or convex. This can give a detection shape to an [Area3D] or turn a " "[PhysicsBody3D] into a solid object.\n" "[b]Warning:[/b] A non-uniformly scaled [CollisionShape3D] will likely not " "behave as expected. Make sure to keep its scale the same on all axes and " "adjust its shape resource instead." msgstr "" "Un nodo que proporciona una forma de polígono engrosada (un prisma) a un " "padre [CollisionObject3D] y permite editarla. El polígono puede ser cóncavo o " "convexo. Esto puede dar una forma de detección a un [Area3D] o convertir un " "[PhysicsBody3D] en un objeto sólido.\n" "[b]Advertencia:[/b] Un [CollisionShape3D] con una escala no uniforme " "probablemente no se comportará como se espera. Asegúrate de mantener su " "escala igual en todos los ejes y ajusta su recurso de forma (shape resource) " "en su lugar." msgid "" "The collision shape color that is displayed in the editor, or in the running " "project if [b]Debug > Visible Collision Shapes[/b] is checked at the top of " "the editor.\n" "[b]Note:[/b] The default value is [member ProjectSettings.debug/shapes/" "collision/shape_color]. The [code]Color(0, 0, 0, 0)[/code] value documented " "here is a placeholder, and not the actual default debug color." msgstr "" "El color de la forma de colisión (collision shape) que se muestra en el " "editor, o en el proyecto en ejecución si la opción [b]Depuración > Formas de " "colisión visibles[/b] está marcada en la parte superior del editor.\n" "[b]Nota:[/b] El valor por defecto es [member ProjectSettings.debug/shapes/" "collision/shape_color]. El valor [code]Color(0, 0, 0, 0)[/code] documentado " "aquí es un marcador de posición (placeholder) y no el color de depuración " "real por defecto." msgid "" "If [code]true[/code], when the shape is displayed, it will show a solid fill " "color in addition to its wireframe." msgstr "" "Si es [code]true[/code], cuando se muestre la forma, mostrará un color de " "relleno sólido además de su estructura alámbrica." msgid "" "Length that the resulting collision extends in either direction perpendicular " "to its 2D polygon." msgstr "" "Longitud en la que la colisión resultante se extiende en cualquier dirección " "perpendicular a su polígono 2D." msgid "" "If [code]true[/code], no collision will be produced. This property should be " "changed with [method Object.set_deferred]." msgstr "" "Si es [code]true[/code], no se producirá ninguna colisión. Esta propiedad " "debe cambiarse con [method Object.set_deferred]." msgid "" "The collision margin for the generated [Shape3D]. See [member Shape3D.margin] " "for more details." msgstr "" "El margen de colisión para el [Shape3D] generado. Véase [member " "Shape3D.margin] para obtener más detalles." msgid "Array of vertices which define the 2D polygon in the local XY plane." msgstr "Array de vértices que definen el polígono 2D en el plano XY local." msgid "A node that provides a [Shape2D] to a [CollisionObject2D] parent." msgstr "Un nodo que proporciona una [Shape2D] a un padre [CollisionObject2D]." msgid "" "A disabled collision shape has no effect in the world. This property should " "be changed with [method Object.set_deferred]." msgstr "" "Una forma de colisión desactivada no tiene ningún efecto en el mundo. Esta " "propiedad debe cambiarse con [method Object.set_deferred]." msgid "" "The margin used for one-way collision (in pixels). Higher values will make " "the shape thicker, and work better for colliders that enter the shape at a " "high velocity." msgstr "" "El margen utilizado para la colisión en un sentido (en píxeles). Valores más " "altos harán la forma más gruesa, y funcionará mejor para los colisionadores " "que entran en la forma a alta velocidad." msgid "The actual shape owned by this collision shape." msgstr "La forma actual que posee esta forma de colisión." msgid "A node that provides a [Shape3D] to a [CollisionObject3D] parent." msgstr "Un nodo que proporciona una [Shape3D] a un padre [CollisionObject3D]." msgid "" "A node that provides a [Shape3D] to a [CollisionObject3D] parent and allows " "it to be edited. This can give a detection shape to an [Area3D] or turn a " "[PhysicsBody3D] into a solid object.\n" "[b]Warning:[/b] A non-uniformly scaled [CollisionShape3D] will likely not " "behave as expected. Make sure to keep its scale the same on all axes and " "adjust its [member shape] resource instead." msgstr "" "Un nodo que proporciona una [Shape3D] a un padre [CollisionObject3D] y " "permite editarla. Esto puede dar una forma de detección a un [Area3D] o " "convertir un [PhysicsBody3D] en un objeto sólido.\n" "[b]Advertencia:[/b] Un [CollisionShape3D] con una escala no uniforme " "probablemente no se comportará como se espera. Asegúrate de mantener su " "escala igual en todos los ejes y ajusta su recurso [member shape] en su lugar." msgid "Use [signal Resource.changed] instead." msgstr "Usa [signal Resource.changed] en su lugar." msgid "This method does nothing." msgstr "Este método no hace nada." msgid "A color represented in RGBA format." msgstr "Un color representado en formato RGBA." msgid "2D GD Paint Demo" msgstr "Demo de Pintura en 2D con GD" msgid "Tween Interpolation Demo" msgstr "Demo de Interpolación de Tweens" msgid "GUI Drag And Drop Demo" msgstr "Demo de Arrastrar y Soltar con la interfaz gráfica de usuario" msgid "" "Constructs a default [Color] from opaque black. This is the same as [constant " "BLACK].\n" "[b]Note:[/b] In C#, this constructs a [Color] with all of its components set " "to [code]0.0[/code] (transparent black)." msgstr "" "Construye un [Color] por defecto a partir de negro opaco. Es lo mismo que " "[constant BLACK].\n" "[b]Nota:[/b] En C#, esto construye un [Color] con todos sus componentes " "establecidos a [code]0.0[/code] (negro transparente)." msgid "" "Constructs a [Color] from the existing color, with [member a] set to the " "given [param alpha] value.\n" "[codeblocks]\n" "[gdscript]\n" "var red = Color(Color.RED, 0.2) # 20% opaque red.\n" "[/gdscript]\n" "[csharp]\n" "var red = new Color(Colors.Red, 0.2f); // 20% opaque red.\n" "[/csharp]\n" "[/codeblocks]" msgstr "" "Construye un [Color] a partir del color existente, con [member a] establecido " "al valor [param alpha] dado.\n" "[codeblocks]\n" "[gdscript]\n" "var red = Color(Color.RED, 0.2) # Rojo opaco al 20%.\n" "[/gdscript]\n" "[csharp]\n" "var red = new Color(Colors.Red, 0.2f); // Rojo opaco al 20%.\n" "[/csharp]\n" "[/codeblocks]" msgid "Constructs a [Color] as a copy of the given [Color]." msgstr "Construye un [Color] como una copia del [Color] dado." msgid "" "Constructs a [Color] either from an HTML color code or from a standardized " "color name. The supported color names are the same as the constants." msgstr "" "Construye un [Color] ya sea desde un código de color HTML o desde un nombre " "de color estandarizado. Los nombres de color soportados son los mismos que " "las constantes." msgid "" "Constructs a [Color] either from an HTML color code or from a standardized " "color name, with [param alpha] on the range of 0.0 to 1.0. The supported " "color names are the same as the constants." msgstr "" "Construye un [Color] ya sea desde un código de color HTML o desde un nombre " "de color estandarizado, con [param alpha] en el rango de 0.0 a 1.0. Los " "nombres de color soportados son los mismos que las constantes." msgid "" "Returns a new color resulting from overlaying this color over the given " "color. In a painting program, you can imagine it as the [param over] color " "painted over this color (including alpha).\n" "[codeblocks]\n" "[gdscript]\n" "var bg = Color(0.0, 1.0, 0.0, 0.5) # Green with alpha of 50%\n" "var fg = Color(1.0, 0.0, 0.0, 0.5) # Red with alpha of 50%\n" "var blended_color = bg.blend(fg) # Brown with alpha of 75%\n" "[/gdscript]\n" "[csharp]\n" "var bg = new Color(0.0f, 1.0f, 0.0f, 0.5f); // Green with alpha of 50%\n" "var fg = new Color(1.0f, 0.0f, 0.0f, 0.5f); // Red with alpha of 50%\n" "Color blendedColor = bg.Blend(fg); // Brown with alpha of 75%\n" "[/csharp]\n" "[/codeblocks]" msgstr "" "Devuelve un nuevo color resultante de superponer este color sobre el color " "dado. En un programa de pintura, puedes imaginarlo como el color [param over] " "pintado sobre este color (incluyendo el alfa).\n" "[codeblocks]\n" "[gdscript]\n" "var bg = Color(0.0, 1.0, 0.0, 0.5) # Verde con alfa del 50%\n" "var fg = Color(1.0, 0.0, 0.0, 0.5) # Rojo con alfa del 50%\n" "var blended_color = bg.blend(fg) # Marrón con alfa del 75%\n" "[/gdscript]\n" "[csharp]\n" "var bg = new Color(0.0f, 1.0f, 0.0f, 0.5f); // Verde con alfa del 50%\n" "var fg = new Color(1.0f, 0.0f, 0.0f, 0.5f); // Rojo con alfa del 50%\n" "Color blendedColor = bg.Blend(fg); // Marrón con alfa del 75%\n" "[/csharp]\n" "[/codeblocks]" msgid "" "Returns a new color with all components clamped between the components of " "[param min] and [param max], by running [method @GlobalScope.clamp] on each " "component." msgstr "" "Devuelve un nuevo color con todos los componentes sujetos entre los " "componentes de [param min] y [param max], ejecutando [method " "@GlobalScope.clamp] en cada componente." msgid "" "Returns a new color resulting from making this color darker by the specified " "[param amount] (ratio from 0.0 to 1.0). See also [method lightened].\n" "[codeblocks]\n" "[gdscript]\n" "var green = Color(0.0, 1.0, 0.0)\n" "var darkgreen = green.darkened(0.2) # 20% darker than regular green\n" "[/gdscript]\n" "[csharp]\n" "var green = new Color(0.0f, 1.0f, 0.0f);\n" "Color darkgreen = green.Darkened(0.2f); // 20% darker than regular green\n" "[/csharp]\n" "[/codeblocks]" msgstr "" "Devuelve un nuevo color resultante de oscurecer este color según la [param " "amount] especificada (relación de 0.0 a 1.0). Véase también [method " "lightened].\n" "[codeblocks]\n" "[gdscript]\n" "var green = Color(0.0, 1.0, 0.0)\n" "var darkgreen = green.darkened(0.2) # 20% más oscuro que el verde normal\n" "[/gdscript]\n" "[csharp]\n" "var green = new Color(0.0f, 1.0f, 0.0f);\n" "Color darkgreen = green.Darkened(0.2f); // 20% más oscuro que el verde " "normal\n" "[/csharp]\n" "[/codeblocks]" msgid "" "Constructs a color from an [url=https://en.wikipedia.org/wiki/HSL_and_HSV]HSV " "profile[/url]. The hue ([param h]), saturation ([param s]), and value ([param " "v]) are typically between 0.0 and 1.0.\n" "[codeblocks]\n" "[gdscript]\n" "var color = Color.from_hsv(0.58, 0.5, 0.79, 0.8)\n" "[/gdscript]\n" "[csharp]\n" "var color = Color.FromHsv(0.58f, 0.5f, 0.79f, 0.8f);\n" "[/csharp]\n" "[/codeblocks]" msgstr "" "Construye un color a partir de un [url=https://en.wikipedia.org/wiki/" "HSL_and_HSV]perfil HSV[/url]. El tono ([param h]), la saturación ([param s]) " "y el valor ([param v]) están normalmente entre 0.0 y 1.0.\n" "[codeblocks]\n" "[gdscript]\n" "var color = Color.from_hsv(0.58, 0.5, 0.79, 0.8)\n" "[/gdscript]\n" "[csharp]\n" "var color = Color.FromHsv(0.58f, 0.5f, 0.79f, 0.8f);\n" "[/csharp]\n" "[/codeblocks]" msgid "" "Constructs a color from an [url=https://bottosson.github.io/posts/" "colorpicker/]OK HSL profile[/url]. The hue ([param h]), saturation ([param " "s]), and lightness ([param l]) are typically between 0.0 and 1.0.\n" "[codeblocks]\n" "[gdscript]\n" "var color = Color.from_ok_hsl(0.58, 0.5, 0.79, 0.8)\n" "[/gdscript]\n" "[csharp]\n" "var color = Color.FromOkHsl(0.58f, 0.5f, 0.79f, 0.8f);\n" "[/csharp]\n" "[/codeblocks]" msgstr "" "Construye un color a partir de un [url=https://bottosson.github.io/posts/" "colorpicker/]perfil OK HSL[/url]. El tono ([param h]), la saturación ([param " "s]) y la luminosidad ([param l]) están normalmente entre 0.0 y 1.0.\n" "[codeblocks]\n" "[gdscript]\n" "var color = Color.from_ok_hsl(0.58, 0.5, 0.79, 0.8)\n" "[/gdscript]\n" "[csharp]\n" "var color = Color.FromOkHsl(0.58f, 0.5f, 0.79f, 0.8f);\n" "[/csharp]\n" "[/codeblocks]" msgid "" "Decodes a [Color] from an RGBE9995 format integer. See [constant " "Image.FORMAT_RGBE9995]." msgstr "" "Decodifica un [Color] desde un entero con formato RGBE9995. Véase [constant " "Image.FORMAT_RGBE9995]." msgid "" "Creates a [Color] from the given string, which can be either an HTML color " "code or a named color (case-insensitive). Returns [param default] if the " "color cannot be inferred from the string.\n" "If you want to create a color from String in a constant expression, use the " "equivalent constructor instead (i.e. [code]Color(\"color string\")[/code])." msgstr "" "Crea un [Color] a partir de la string dada, que puede ser un código de color " "HTML o un color con nombre (insensible a mayúsculas y minúsculas). Devuelve " "[param default] si no se puede inferir el color de la string.\n" "Si quieres crear un color desde una String en una expresión constante, usa el " "constructor equivalente en su lugar (ej. [code]Color(\"color string\")[/" "code])." msgid "" "Returns the [Color] associated with the provided [param hex] integer in 32-" "bit RGBA format (8 bits per channel). This method is the inverse of [method " "to_rgba32].\n" "In GDScript and C#, the [int] is best visualized with hexadecimal notation " "([code]\"0x\"[/code] prefix, making it [code]\"0xRRGGBBAA\"[/code]).\n" "[codeblocks]\n" "[gdscript]\n" "var red = Color.hex(0xff0000ff)\n" "var dark_cyan = Color.hex(0x008b8bff)\n" "var my_color = Color.hex(0xbbefd2a4)\n" "[/gdscript]\n" "[csharp]\n" "var red = new Color(0xff0000ff);\n" "var dark_cyan = new Color(0x008b8bff);\n" "var my_color = new Color(0xbbefd2a4);\n" "[/csharp]\n" "[/codeblocks]\n" "If you want to use hex notation in a constant expression, use the equivalent " "constructor instead (i.e. [code]Color(0xRRGGBBAA)[/code])." msgstr "" "Devuelve el [Color] asociado con el entero [param hex] proporcionado en " "formato RGBA de 32 bits (8 bits por canal). Este método es el inverso de " "[method to_rgba32].\n" "En GDScript y C#, el [int] se visualiza mejor con notación hexadecimal ([code]" "\"0x\"[/code] prefijo, haciéndolo [code]\"0xRRGGBBAA\"[/code]).\n" "[codeblocks]\n" "[gdscript]\n" "var red = Color.hex(0xff0000ff)\n" "var dark_cyan = Color.hex(0x008b8bff)\n" "var my_color = Color.hex(0xbbefd2a4)\n" "[/gdscript]\n" "[csharp]\n" "var red = new Color(0xff0000ff);\n" "var dark_cyan = new Color(0x008b8bff);\n" "var my_color = new Color(0xbbefd2a4);\n" "[/csharp]\n" "[/codeblocks]\n" "Si quieres usar la notación hexadecimal en una expresión constante, usa el " "constructor equivalente en su lugar (ej. [code]Color(0xRRGGBBAA)[/code])." msgid "" "Returns the [Color] associated with the provided [param hex] integer in 64-" "bit RGBA format (16 bits per channel). This method is the inverse of [method " "to_rgba64].\n" "In GDScript and C#, the [int] is best visualized with hexadecimal notation " "([code]\"0x\"[/code] prefix, making it [code]\"0xRRRRGGGGBBBBAAAA\"[/code])." msgstr "" "Devuelve el [Color] asociado con el entero [param hex] proporcionado en " "formato RGBA de 64 bits (16 bits por canal). Este método es el inverso de " "[method to_rgba64].\n" "En GDScript y C#, el [int] se visualiza mejor con la notación hexadecimal " "([code]\"0x\"[/code] prefijo, haciéndolo [code]\"0xRRRRGGGGBBBBAAAA\"[/code])." msgid "" "Returns a new color from [param rgba], an HTML hexadecimal color string. " "[param rgba] is not case-sensitive, and may be prefixed by a hash sign " "([code]#[/code]).\n" "[param rgba] must be a valid three-digit or six-digit hexadecimal color " "string, and may contain an alpha channel value. If [param rgba] does not " "contain an alpha channel value, an alpha channel value of 1.0 is applied. If " "[param rgba] is invalid, returns an empty color.\n" "[codeblocks]\n" "[gdscript]\n" "var blue = Color.html(\"#0000ff\") # blue is Color(0.0, 0.0, 1.0, 1.0)\n" "var green = Color.html(\"#0F0\") # green is Color(0.0, 1.0, 0.0, 1.0)\n" "var col = Color.html(\"663399cc\") # col is Color(0.4, 0.2, 0.6, 0.8)\n" "[/gdscript]\n" "[csharp]\n" "var blue = Color.FromHtml(\"#0000ff\"); // blue is Color(0.0, 0.0, 1.0, 1.0)\n" "var green = Color.FromHtml(\"#0F0\"); // green is Color(0.0, 1.0, 0.0, " "1.0)\n" "var col = Color.FromHtml(\"663399cc\"); // col is Color(0.4, 0.2, 0.6, 0.8)\n" "[/csharp]\n" "[/codeblocks]" msgstr "" "Devuelve un nuevo color de [param rgba], una string de color hexadecimal " "HTML. [param rgba] no distingue entre mayúsculas y minúsculas, y puede tener " "el prefijo de un signo hash ([code]#[/code]).\n" "[param rgba] debe ser una string de color hexadecimal válida de tres o seis " "dígitos, y puede contener un valor de canal alfa. Si [param rgba] no contiene " "un valor de canal alfa, se aplica un valor de canal alfa de 1.0. Si [param " "rgba] no es válido, devuelve un color vacío.\n" "[codeblocks]\n" "[gdscript]\n" "var azul = Color.html(\"#0000ff\") # azul es Color(0.0, 0.0, 1.0, 1.0)\n" "var verde = Color.html(\"#0F0\") # verde es Color(0.0, 1.0, 0.0, 1.0)\n" "var col = Color.html(\"663399cc\") # col es Color(0.4, 0.2, 0.6, 0.8)\n" "[/gdscript]\n" "[csharp]\n" "var azul = Color.FromHtml(\"#0000ff\"); // azul es Color(0.0, 0.0, 1.0, 1.0)\n" "var verde = Color.FromHtml(\"#0F0\"); // verde es Color(0.0, 1.0, 0.0, " "1.0)\n" "var col = Color.FromHtml(\"663399cc\"); // col es Color(0.4, 0.2, 0.6, 0.8)\n" "[/csharp]\n" "[/codeblocks]" msgid "" "Returns [code]true[/code] if [param color] is a valid HTML hexadecimal color " "string. The string must be a hexadecimal value (case-insensitive) of either " "3, 4, 6 or 8 digits, and may be prefixed by a hash sign ([code]#[/code]). " "This method is identical to [method String.is_valid_html_color].\n" "[codeblocks]\n" "[gdscript]\n" "Color.html_is_valid(\"#55aaFF\") # Returns true\n" "Color.html_is_valid(\"#55AAFF20\") # Returns true\n" "Color.html_is_valid(\"55AAFF\") # Returns true\n" "Color.html_is_valid(\"#F2C\") # Returns true\n" "\n" "Color.html_is_valid(\"#AABBC\") # Returns false\n" "Color.html_is_valid(\"#55aaFF5\") # Returns false\n" "[/gdscript]\n" "[csharp]\n" "Color.HtmlIsValid(\"#55AAFF\"); // Returns true\n" "Color.HtmlIsValid(\"#55AAFF20\"); // Returns true\n" "Color.HtmlIsValid(\"55AAFF\"); // Returns true\n" "Color.HtmlIsValid(\"#F2C\"); // Returns true\n" "\n" "Color.HtmlIsValid(\"#AABBC\"); // Returns false\n" "Color.HtmlIsValid(\"#55aaFF5\"); // Returns false\n" "[/csharp]\n" "[/codeblocks]" msgstr "" "Devuelve [code]true[/code] si [param color] es una string hexadecimal HTML " "válida.La string debe ser un valor hexadecimal (insensible a mayúsculas y " "minúsculas) de 3, 4, 6 u 8 dígitos, y puede tener el prefijo de un signo hash " "([code]#[/code]).Este método es idéntico a [method " "String.is_valid_html_color].\n" "[codeblocks]\n" "[gdscript]\n" "Color.html_is_valid(\"#55aaFF\") # Devuelve true\n" "Color.html_is_valid(\"#55AAFF20\") # Devuelve true\n" "Color.html_is_valid(\"55AAFF\") # Devuelve true\n" "Color.html_is_valid(\"#F2C\") # Devuelve true\n" "\n" "Color.html_is_valid(\"#AABBC\") # Devuelve false\n" "Color.html_is_valid(\"#55aaFF5\") # Devuelve false\n" "[/gdscript]\n" "[csharp]\n" "Color.HtmlIsValid(\"#55AAFF\"); // Devuelve true\n" "Color.HtmlIsValid(\"#55AAFF20\"); // Devuelve true\n" "Color.HtmlIsValid(\"55AAFF\"); // Devuelve true\n" "Color.HtmlIsValid(\"#F2C\"); // Devuelve true\n" "\n" "Color.HtmlIsValid(\"#AABBC\"); // Devuelve false\n" "Color.HtmlIsValid(\"#55aaFF5\"); // Devuelve false\n" "[/csharp]\n" "[/codeblocks]" msgid "" "Returns the color with its [member r], [member g], and [member b] components " "inverted ([code](1 - r, 1 - g, 1 - b, a)[/code]).\n" "[codeblocks]\n" "[gdscript]\n" "var black = Color.WHITE.inverted()\n" "var color = Color(0.3, 0.4, 0.9)\n" "var inverted_color = color.inverted() # Equivalent to `Color(0.7, 0.6, 0.1)`\n" "[/gdscript]\n" "[csharp]\n" "var black = Colors.White.Inverted();\n" "var color = new Color(0.3f, 0.4f, 0.9f);\n" "Color invertedColor = color.Inverted(); // Equivalent to `new Color(0.7f, " "0.6f, 0.1f)`\n" "[/csharp]\n" "[/codeblocks]" msgstr "" "Devuelve el color con sus componentes [member r], [member g] y [member b] " "invertidos ([code](1 - r, 1 - g, 1 - b, a)[/code]).\n" "[codeblocks]\n" "[gdscript]\n" "var black = Color.WHITE.inverted()\n" "var color = Color(0.3, 0.4, 0.9)\n" "var inverted_color = color.inverted() # Equivalente a `Color(0.7, 0.6, 0.1)`\n" "[/gdscript]\n" "[csharp]\n" "var black = Colors.White.Inverted();\n" "var color = new Color(0.3f, 0.4f, 0.9f);\n" "Color invertedColor = color.Inverted(); // Equivalente a `new Color(0.7f, " "0.6f, 0.1f)`\n" "[/csharp]\n" "[/codeblocks]" msgid "" "Returns the linear interpolation between this color's components and [param " "to]'s components. The interpolation factor [param weight] should be between " "0.0 and 1.0 (inclusive). See also [method @GlobalScope.lerp].\n" "[codeblocks]\n" "[gdscript]\n" "var red = Color(1.0, 0.0, 0.0)\n" "var aqua = Color(0.0, 1.0, 0.8)\n" "\n" "red.lerp(aqua, 0.2) # Returns Color(0.8, 0.2, 0.16)\n" "red.lerp(aqua, 0.5) # Returns Color(0.5, 0.5, 0.4)\n" "red.lerp(aqua, 1.0) # Returns Color(0.0, 1.0, 0.8)\n" "[/gdscript]\n" "[csharp]\n" "var red = new Color(1.0f, 0.0f, 0.0f);\n" "var aqua = new Color(0.0f, 1.0f, 0.8f);\n" "\n" "red.Lerp(aqua, 0.2f); // Returns Color(0.8f, 0.2f, 0.16f)\n" "red.Lerp(aqua, 0.5f); // Returns Color(0.5f, 0.5f, 0.4f)\n" "red.Lerp(aqua, 1.0f); // Returns Color(0.0f, 1.0f, 0.8f)\n" "[/csharp]\n" "[/codeblocks]" msgstr "" "Devuelve la interpolación lineal entre los componentes de este color y los " "componentes de [param to]. El factor de interpolación [param weight] debe " "estar entre 0.0 y 1.0 (inclusivo). Véase también [method @GlobalScope.lerp].\n" "[codeblocks]\n" "[gdscript]\n" "var rojo = Color(1.0, 0.0, 0.0)\n" "var aqua = Color(0.0, 1.0, 0.8)\n" "\n" "rojo.lerp(aqua, 0.2) # Devuelve Color(0.8, 0.2, 0.16)\n" "rojo.lerp(aqua, 0.5) # Devuelve Color(0.5, 0.5, 0.4)\n" "rojo.lerp(aqua, 1.0) # Devuelve Color(0.0, 1.0, 0.8)\n" "[/gdscript]\n" "[csharp]\n" "var rojo = new Color(1.0f, 0.0f, 0.0f);\n" "var aqua = new Color(0.0f, 1.0f, 0.8f);\n" "\n" "rojo.Lerp(aqua, 0.2f); // Devuelve Color(0.8f, 0.2f, 0.16f)\n" "rojo.Lerp(aqua, 0.5f); // Devuelve Color(0.5f, 0.5f, 0.4f)\n" "rojo.Lerp(aqua, 1.0f); // Devuelve Color(0.0f, 1.0f, 0.8f)\n" "[/csharp]\n" "[/codeblocks]" msgid "" "Returns a new color resulting from making this color lighter by the specified " "[param amount], which should be a ratio from 0.0 to 1.0. See also [method " "darkened].\n" "[codeblocks]\n" "[gdscript]\n" "var green = Color(0.0, 1.0, 0.0)\n" "var light_green = green.lightened(0.2) # 20% lighter than regular green\n" "[/gdscript]\n" "[csharp]\n" "var green = new Color(0.0f, 1.0f, 0.0f);\n" "Color lightGreen = green.Lightened(0.2f); // 20% lighter than regular green\n" "[/csharp]\n" "[/codeblocks]" msgstr "" "Devuelve un nuevo color resultante de hacer este color más claro según la " "[param amount] especificada, que debería ser una relación de 0.0 a 1.0. Véase " "también [method darkened].\n" "[codeblocks]\n" "[gdscript]\n" "var verde = Color(0.0, 1.0, 0.0)\n" "var light_green = verde.lightened(0.2) # 20% más claro que el verde normal\n" "[/gdscript]\n" "[csharp]\n" "var verde = new Color(0.0f, 1.0f, 0.0f);\n" "Color verdeClaro = verde.Lightened(0.2f); // 20% más claro que el verde " "normal\n" "[/csharp]\n" "[/codeblocks]" msgid "" "Returns the color converted to a 32-bit integer in ABGR format (each " "component is 8 bits). ABGR is the reversed version of the default RGBA " "format.\n" "[codeblocks]\n" "[gdscript]\n" "var color = Color(1, 0.5, 0.2)\n" "print(color.to_abgr32()) # Prints 4281565439\n" "[/gdscript]\n" "[csharp]\n" "var color = new Color(1.0f, 0.5f, 0.2f);\n" "GD.Print(color.ToAbgr32()); // Prints 4281565439\n" "[/csharp]\n" "[/codeblocks]" msgstr "" "Devuelve el color convertido a un entero de 32 bits en formato ABGR (cada " "componente ocupa 8 bits). ABGR es la versión invertida del formato RGBA por " "defecto.\n" "[codeblocks]\n" "[gdscript]\n" "var color = Color(1, 0.5, 0.2)\n" "print(color.to_abgr32()) # Imprime 4281565439\n" "[/gdscript]\n" "[csharp]\n" "var color = new Color(1.0f, 0.5f, 0.2f);\n" "GD.Print(color.ToAbgr32()); // Imprime 4281565439\n" "[/csharp]\n" "[/codeblocks]" msgid "" "Returns the color converted to a 64-bit integer in ABGR format (each " "component is 16 bits). ABGR is the reversed version of the default RGBA " "format.\n" "[codeblocks]\n" "[gdscript]\n" "var color = Color(1, 0.5, 0.2)\n" "print(color.to_abgr64()) # Prints -225178692812801\n" "[/gdscript]\n" "[csharp]\n" "var color = new Color(1.0f, 0.5f, 0.2f);\n" "GD.Print(color.ToAbgr64()); // Prints -225178692812801\n" "[/csharp]\n" "[/codeblocks]" msgstr "" "Devuelve el color convertido a un entero de 64 bits en formato ABGR (cada " "componente ocupa 16 bits). ABGR es la versión invertida del formato RGBA por " "defecto.\n" "[codeblocks]\n" "[gdscript]\n" "var color = Color(1, 0.5, 0.2)\n" "print(color.to_abgr64()) # Imprime -225178692812801\n" "[/gdscript]\n" "[csharp]\n" "var color = new Color(1.0f, 0.5f, 0.2f);\n" "GD.Print(color.ToAbgr64()); // Imprime -225178692812801\n" "[/csharp]\n" "[/codeblocks]" msgid "" "Returns the color converted to a 32-bit integer in ARGB format (each " "component is 8 bits). ARGB is more compatible with DirectX.\n" "[codeblocks]\n" "[gdscript]\n" "var color = Color(1, 0.5, 0.2)\n" "print(color.to_argb32()) # Prints 4294934323\n" "[/gdscript]\n" "[csharp]\n" "var color = new Color(1.0f, 0.5f, 0.2f);\n" "GD.Print(color.ToArgb32()); // Prints 4294934323\n" "[/csharp]\n" "[/codeblocks]" msgstr "" "Devuelve el color convertido a un entero de 32 bits en formato ARGB (cada " "componente ocupa 8 bits). ARGB es más compatible con DirectX.\n" "[codeblocks]\n" "[gdscript]\n" "var color = Color(1, 0.5, 0.2)\n" "print(color.to_argb32()) # Imprime 4294934323\n" "[/gdscript]\n" "[csharp]\n" "var color = new Color(1.0f, 0.5f, 0.2f);\n" "GD.Print(color.ToArgb32()); // Imprime 4294934323\n" "[/csharp]\n" "[/codeblocks]" msgid "" "Returns the color converted to a 64-bit integer in ARGB format (each " "component is 16 bits). ARGB is more compatible with DirectX.\n" "[codeblocks]\n" "[gdscript]\n" "var color = Color(1, 0.5, 0.2)\n" "print(color.to_argb64()) # Prints -2147470541\n" "[/gdscript]\n" "[csharp]\n" "var color = new Color(1.0f, 0.5f, 0.2f);\n" "GD.Print(color.ToArgb64()); // Prints -2147470541\n" "[/csharp]\n" "[/codeblocks]" msgstr "" "Devuelve el color convertido a un entero de 64 bits en formato ARGB (cada " "componente ocupa 16 bits). ARGB es más compatible con DirectX.\n" "[codeblocks]\n" "[gdscript]\n" "var color = Color(1, 0.5, 0.2)\n" "print(color.to_argb64()) # Imprime -2147470541\n" "[/gdscript]\n" "[csharp]\n" "var color = new Color(1.0f, 0.5f, 0.2f);\n" "GD.Print(color.ToArgb64()); // Imprime -2147470541\n" "[/csharp]\n" "[/codeblocks]" msgid "" "Returns the color converted to an HTML hexadecimal color [String] in RGBA " "format, without the hash ([code]#[/code]) prefix.\n" "Setting [param with_alpha] to [code]false[/code], excludes alpha from the " "hexadecimal string, using RGB format instead of RGBA format.\n" "[codeblocks]\n" "[gdscript]\n" "var white = Color(1, 1, 1, 0.5)\n" "var with_alpha = white.to_html() # Returns \"ffffff7f\"\n" "var without_alpha = white.to_html(false) # Returns \"ffffff\"\n" "[/gdscript]\n" "[csharp]\n" "var white = new Color(1, 1, 1, 0.5f);\n" "string withAlpha = white.ToHtml(); // Returns \"ffffff7f\"\n" "string withoutAlpha = white.ToHtml(false); // Returns \"ffffff\"\n" "[/csharp]\n" "[/codeblocks]" msgstr "" "Devuelve el color convertido a una [String] de color hexadecimal HTML en " "formato RGBA, sin el prefijo hash ([code]#[/code]).\n" "Si estableces [param with_alpha] a [code]false[/code], se excluye el alfa de " "la string hexadecimal, usando el formato RGB en lugar del formato RGBA.\n" "[codeblocks]\n" "[gdscript]\n" "var white = Color(1, 1, 1, 0.5)\n" "var with_alpha = white.to_html() # Devuelve \"ffffff7f\"\n" "var without_alpha = white.to_html(false) # Devuelve \"ffffff\"\n" "[/gdscript]\n" "[csharp]\n" "var white = new Color(1, 1, 1, 0.5f);\n" "string withAlpha = white.ToHtml(); // Devuelve \"ffffff7f\"\n" "string withoutAlpha = white.ToHtml(false); // Devuelve \"ffffff\"\n" "[/csharp]\n" "[/codeblocks]" msgid "" "Returns the color converted to a 32-bit integer in RGBA format (each " "component is 8 bits). RGBA is Godot's default format. This method is the " "inverse of [method hex].\n" "[codeblocks]\n" "[gdscript]\n" "var color = Color(1, 0.5, 0.2)\n" "print(color.to_rgba32()) # Prints 4286526463\n" "[/gdscript]\n" "[csharp]\n" "var color = new Color(1, 0.5f, 0.2f);\n" "GD.Print(color.ToRgba32()); // Prints 4286526463\n" "[/csharp]\n" "[/codeblocks]" msgstr "" "Devuelve el color convertido a un entero de 32 bits en formato RGBA (cada " "componente tiene 8 bits). RGBA es el formato por defecto de Godot. Este " "método es el inverso de [method hex].\n" "[codeblocks]\n" "[gdscript]\n" "var color = Color(1, 0.5, 0.2)\n" "print(color.to_rgba32()) # Imprime 4286526463\n" "[/gdscript]\n" "[csharp]\n" "var color = new Color(1, 0.5f, 0.2f);\n" "GD.Print(color.ToRgba32()); // Imprime 4286526463\n" "[/csharp]\n" "[/codeblocks]" msgid "The color's blue component, typically on the range of 0 to 1." msgstr "El componente azul del color, típicamente en el rango de 0 a 1." msgid "The color's green component, typically on the range of 0 to 1." msgstr "El componente verde del color, típicamente en el rango de 0 a 1." msgid "The HSV hue of this color, on the range 0 to 1." msgstr "El tono del HSV de este color, en el rango de 0 a 1.." msgid "The OKHSL hue of this color, on the range 0 to 1." msgstr "El tono OKHSL de este color, en el rango de 0 a 1." msgid "The OKHSL lightness of this color, on the range 0 to 1." msgstr "La luminosidad OKHSL de este color, en el rango de 0 a 1." msgid "The OKHSL saturation of this color, on the range 0 to 1." msgstr "La saturación OKHSL de este color, en el rango de 0 a 1." msgid "The color's red component, typically on the range of 0 to 1." msgstr "El componente rojo del color, típicamente en el rango de 0 a 1." msgid "The HSV saturation of this color, on the range 0 to 1." msgstr "La saturación del HSV de este color, en el rango de 0 a 1." msgid "The HSV value (brightness) of this color, on the range 0 to 1." msgstr "El valor HSV (brillo) de este color, en el rango de 0 a 1." msgid "Alice blue color." msgstr "Color azul Alice." msgid "Antique white color." msgstr "Color blanco antiguo." msgid "Aqua color." msgstr "Color agua." msgid "Aquamarine color." msgstr "Color aguamarina." msgid "Azure color." msgstr "Color Azure." msgid "Beige color." msgstr "Color beige." msgid "Bisque color." msgstr "Color bisque." msgid "Black color. In GDScript, this is the default value of any color." msgstr "" "Color negro. En GDScript, este es el valor predeterminado de cualquier color." msgid "Blanched almond color." msgstr "Color almendra blanqueada." msgid "Blue color." msgstr "Color azul." msgid "Blue violet color." msgstr "Color azul violeta." msgid "Brown color." msgstr "Color marrón." msgid "Burlywood color." msgstr "Color madera fuerte." msgid "Cadet blue color." msgstr "Color azul cadete." msgid "Chartreuse color." msgstr "Color cartujo." msgid "Chocolate color." msgstr "Color chocolate." msgid "Coral color." msgstr "Color coral." msgid "Cornflower blue color." msgstr "Color azul aciano." msgid "Cornsilk color." msgstr "Color seda de maíz." msgid "Crimson color." msgstr "Color carmesí." msgid "Cyan color." msgstr "Color cian." msgid "Dark blue color." msgstr "Color azul oscuro." msgid "Dark cyan color." msgstr "Color cian oscuro." msgid "Dark goldenrod color." msgstr "Color de vara dorada oscura." msgid "Dark gray color." msgstr "Color gris oscuro." msgid "Dark green color." msgstr "Color verde oscuro." msgid "Dark khaki color." msgstr "Color caqui oscuro." msgid "Dark magenta color." msgstr "Color magenta oscuro." msgid "Dark olive green color." msgstr "Color verde oliva oscuro." msgid "Dark orange color." msgstr "Color naranja oscuro." msgid "Dark orchid color." msgstr "Color de orquídea oscura." msgid "Dark red color." msgstr "Color rojo oscuro." msgid "Dark salmon color." msgstr "Color salmón oscuro." msgid "Dark sea green color." msgstr "Color verde mar oscuro." msgid "Dark slate blue color." msgstr "Color azul pizarra oscuro." msgid "Dark slate gray color." msgstr "Color gris pizarra oscuro." msgid "Dark turquoise color." msgstr "Color turquesa oscuro." msgid "Dark violet color." msgstr "Color violeta oscuro." msgid "Deep pink color." msgstr "Color rosa intenso." msgid "Deep sky blue color." msgstr "Color azul cielo profundo." msgid "Dim gray color." msgstr "Color gris oscuro." msgid "Dodger blue color." msgstr "Color azul de los Dodgers." msgid "Firebrick color." msgstr "Color de ladrillo de fuego." msgid "Floral white color." msgstr "Color blanco floral." msgid "Forest green color." msgstr "Color verde del bosque." msgid "Fuchsia color." msgstr "Color fucsia." msgid "Gainsboro color." msgstr "Color Gainsboro." msgid "Ghost white color." msgstr "Color blanco fantasma." msgid "Gold color." msgstr "Color oro." msgid "Goldenrod color." msgstr "Color de la vara de oro." msgid "Gray color." msgstr "Color gris." msgid "Green color." msgstr "Color verde." msgid "Green yellow color." msgstr "Color amarillo verde." msgid "Honeydew color." msgstr "Color melón." msgid "Hot pink color." msgstr "Color rosa vivo." msgid "Indian red color." msgstr "Color rojo indio." msgid "Indigo color." msgstr "Color índigo." msgid "Ivory color." msgstr "Color marfil." msgid "Khaki color." msgstr "Color caqui." msgid "Lavender color." msgstr "Color lavanda." msgid "Lavender blush color." msgstr "Color de rubor lavanda." msgid "Lawn green color." msgstr "Color verde césped." msgid "Lemon chiffon color." msgstr "Color chifón limón." msgid "Light blue color." msgstr "Color azul claro." msgid "Light coral color." msgstr "Color coral claro." msgid "Light cyan color." msgstr "Color cian claro." msgid "Light goldenrod color." msgstr "Color de vara de oro claro." msgid "Light gray color." msgstr "Color gris claro." msgid "Light green color." msgstr "Color verde claro." msgid "Light pink color." msgstr "Color rosa claro." msgid "Light salmon color." msgstr "Color salmón claro." msgid "Light sea green color." msgstr "Color verde mar claro." msgid "Light sky blue color." msgstr "Color azul celeste." msgid "Light slate gray color." msgstr "Color gris pizarra claro." msgid "Light steel blue color." msgstr "Color azul acero claro." msgid "Light yellow color." msgstr "Color amarillo claro." msgid "Lime color." msgstr "Color lima." msgid "Lime green color." msgstr "Color verde lima." msgid "Linen color." msgstr "Color lino." msgid "Magenta color." msgstr "Color magenta." msgid "Maroon color." msgstr "Color granate." msgid "Medium aquamarine color." msgstr "Color aguamarina medio." msgid "Medium blue color." msgstr "Color azul medio." msgid "Medium orchid color." msgstr "Color de orquídea medio." msgid "Medium purple color." msgstr "Color púrpura medio." msgid "Medium sea green color." msgstr "Color verde marino medio." msgid "Medium slate blue color." msgstr "Color azul pizarra medio." msgid "Medium spring green color." msgstr "Color verde primaveral medio." msgid "Medium turquoise color." msgstr "Color turquesa medio." msgid "Medium violet red color." msgstr "Color rojo violáceo medio." msgid "Midnight blue color." msgstr "Color azul medianoche." msgid "Mint cream color." msgstr "Color crema de menta." msgid "Misty rose color." msgstr "Color rosa niebla." msgid "Moccasin color." msgstr "Color mocasín." msgid "Navajo white color." msgstr "Color blanco navajo." msgid "Navy blue color." msgstr "Color azul marino." msgid "Old lace color." msgstr "Color de encaje antiguo." msgid "Olive color." msgstr "Color oliva." msgid "Olive drab color." msgstr "Color aceituna monótono." msgid "Orange color." msgstr "Color naranja." msgid "Orange red color." msgstr "Color rojo anaranjado." msgid "Orchid color." msgstr "Color orquídea." msgid "Pale goldenrod color." msgstr "Color de vara de oro pálido." msgid "Pale green color." msgstr "Color verde pálido." msgid "Pale turquoise color." msgstr "Color turquesa pálido." msgid "Pale violet red color." msgstr "Color rojo violeta pálido." msgid "Papaya whip color." msgstr "Color del látigo de papaya." msgid "Peach puff color." msgstr "Color melocotón." msgid "Peru color." msgstr "Color Perú." msgid "Pink color." msgstr "Color rosa." msgid "Plum color." msgstr "Color ciruela." msgid "Powder blue color." msgstr "Color azul de polvo." msgid "Purple color." msgstr "Color púrpura." msgid "Rebecca purple color." msgstr "Color púrpura de Rebecca." msgid "Red color." msgstr "Color rojo." msgid "Rosy brown color." msgstr "Color marrón rosado." msgid "Royal blue color." msgstr "Color azul real." msgid "Saddle brown color." msgstr "Color marrón silla de montar." msgid "Salmon color." msgstr "Color salmón." msgid "Sandy brown color." msgstr "Color marrón arenoso." msgid "Sea green color." msgstr "Color verde mar." msgid "Seashell color." msgstr "Color de la concha marina." msgid "Sienna color." msgstr "Color siena." msgid "Silver color." msgstr "Color plata." msgid "Sky blue color." msgstr "Color azul cielo." msgid "Slate blue color." msgstr "Color azul pizarra." msgid "Slate gray color." msgstr "Color gris pizarra." msgid "Snow color." msgstr "Color nieve." msgid "Spring green color." msgstr "Color verde primaveral." msgid "Steel blue color." msgstr "Color azul acero." msgid "Tan color." msgstr "Color bronceado." msgid "Teal color." msgstr "Color verde azulado." msgid "Thistle color." msgstr "Color cardo." msgid "Tomato color." msgstr "Color tomate." msgid "Transparent color (white with zero alpha)." msgstr "Color transparente (blanco con alfa cero)." msgid "Turquoise color." msgstr "Color turquesa." msgid "Violet color." msgstr "Color violeta." msgid "Web gray color." msgstr "Color gris web." msgid "Web green color." msgstr "Color verde web." msgid "Web maroon color." msgstr "Color granate web." msgid "Web purple color." msgstr "Color púrpura web." msgid "Wheat color." msgstr "Color trigo." msgid "White color." msgstr "Color blanco." msgid "White smoke color." msgstr "Color humo blanco." msgid "Yellow color." msgstr "Color amarillo." msgid "Yellow green color." msgstr "Color verde amarillo." msgid "" "Multiplies each component of the [Color] by the components of the given " "[Color]." msgstr "" "Multiplica cada componente del [Color] por los componentes del [Color] dado." msgid "Multiplies each component of the [Color] by the given [float]." msgstr "Multiplica cada componente del [Color] por el [float] dado." msgid "Multiplies each component of the [Color] by the given [int]." msgstr "Multiplica cada componente de [Color] por el [int] dado." msgid "" "Adds each component of the [Color] with the components of the given [Color]." msgstr "Suma cada componente del [Color] con los componentes del [Color] dado." msgid "" "Subtracts each component of the [Color] by the components of the given " "[Color]." msgstr "Resta cada componente del [Color] por los componentes del [Color] dado." msgid "" "Divides each component of the [Color] by the components of the given [Color]." msgstr "" "Divide cada componente del [Color] por los componentes del [Color] dado." msgid "Divides each component of the [Color] by the given [float]." msgstr "Divide cada componente del [Color] por el [float] dado." msgid "Divides each component of the [Color] by the given [int]." msgstr "Divide cada componente de [Color] por el [int] dado." msgid "" "Access color components using their index. [code][0][/code] is equivalent to " "[member r], [code][1][/code] is equivalent to [member g], [code][2][/code] is " "equivalent to [member b], and [code][3][/code] is equivalent to [member a]." msgstr "" "Accede a los componentes de color usando su índice. [code][0][/code] es " "equivalente a [member r], [code][1][/code] es equivalente a [member g], [code]" "[2][/code] es equivalente a [member b], y [code][3][/code] es equivalente a " "[member a]." msgid "" "Returns the same value as if the [code]+[/code] was not there. Unary [code]+[/" "code] does nothing, but sometimes it can make your code more readable." msgstr "" "Devuelve el mismo valor como si el [code]+[/code] no estuviera ahí. El [code]+" "[/code] unario no hace nada, pero a veces puede hacer que tu código sea más " "legible." msgid "" "Inverts the given color. This is equivalent to [code]Color.WHITE - c[/code] " "or [code]Color(1 - c.r, 1 - c.g, 1 - c.b, 1 - c.a)[/code]. Unlike with " "[method inverted], the [member a] component is inverted, too." msgstr "" "Invierte el color dado. Esto es equivalente a [code]Color.WHITE - c[/code] o " "a [code]Color(1 - c.r, 1 - c.g, 1 - c.b, 1 - c.a)[/code]. A diferencia de " "[method inverted], el componente [member a] también se invierte." msgid "" "A resource class for managing a palette of colors, which can be loaded and " "saved using [ColorPicker]." msgstr "" "Una clase de recurso para gestionar una paleta de colores, que puede ser " "cargada y guardada usando [ColorPicker]." msgid "" "The [ColorPalette] resource is designed to store and manage a collection of " "colors. This resource is useful in scenarios where a predefined set of colors " "is required, such as for creating themes, designing user interfaces, or " "managing game assets. The built-in [ColorPicker] control can also make use of " "[ColorPalette] without additional code." msgstr "" "El recurso [ColorPalette] está diseñado para almacenar y gestionar una " "colección de colores. Este recurso es útil en escenarios donde se requiere un " "conjunto de colores predefinido, como para crear temas, diseñar interfaces de " "usuario o gestionar recursos del juego. El control [ColorPicker] incorporado " "también puede hacer uso de [ColorPalette] sin código adicional." msgid "A [PackedColorArray] containing the colors in the palette." msgstr "Un [PackedColorArray] que contiene los colores de la paleta." msgid "A widget that provides an interface for selecting or modifying a color." msgstr "" "Un widget que proporciona una interfaz para seleccionar o modificar un color." msgid "" "A widget that provides an interface for selecting or modifying a color. It " "can optionally provide functionalities like a color sampler (eyedropper), " "color modes, and presets.\n" "[b]Note:[/b] This control is the color picker widget itself. You can use a " "[ColorPickerButton] instead if you need a button that brings up a " "[ColorPicker] in a popup." msgstr "" "Un widget que proporciona una interfaz para seleccionar o modificar un color. " "Opcionalmente, puede proporcionar funcionalidades como un muestreador de " "color (cuentagotas), modos de color y preajustes.\n" "[b]Nota:[/b] Este control es el widget selector de color en sí mismo. Puedes " "usar un [ColorPickerButton] en su lugar si necesitas un botón que muestre un " "[ColorPicker] en un popup." msgid "" "Adds the given color to a list of color presets. The presets are displayed in " "the color picker and the user will be able to select them.\n" "[b]Note:[/b] The presets list is only for [i]this[/i] color picker." msgstr "" "Añade el color dado a una lista de preajustes de color. Los preajustes se " "muestran en el selector de color y el usuario podrá seleccionarlos.\n" "[b]Nota:[/b] La lista de preajustes es solo para [i]este[/i] selector de " "color." msgid "" "Adds the given color to a list of color recent presets so that it can be " "picked later. Recent presets are the colors that were picked recently, a new " "preset is automatically created and added to recent presets when you pick a " "new color.\n" "[b]Note:[/b] The recent presets list is only for [i]this[/i] color picker." msgstr "" "Añade el color dado a una lista de preajustes de color recientes para que " "pueda ser seleccionado más adelante. Los preajustes recientes son los colores " "que se han seleccionado recientemente, un nuevo preajuste se crea y se añade " "automáticamente a los preajustes recientes cuando seleccionas un nuevo " "color.\n" "[b]Nota:[/b] La lista de preajustes recientes es solo para [i]este[/i] " "selector de color." msgid "" "Removes the given color from the list of color presets of this color picker." msgstr "" "Elimina el color dado de la lista de colores predefinidos de este selector de " "colores." msgid "" "Removes the given color from the list of color recent presets of this color " "picker." msgstr "" "Elimina el color dado de la lista de preajustes de color recientes de este " "selector de color." msgid "Returns the list of colors in the presets of the color picker." msgstr "Devuelve la lista de colores en los preajustes del selector de colores." msgid "Returns the list of colors in the recent presets of the color picker." msgstr "" "Devuelve la lista de colores en los preajustes recientes del selector de " "color." msgid "" "If [code]true[/code], it's possible to add presets under Swatches. If " "[code]false[/code], the button to add presets is disabled." msgstr "" "Si es [code]true[/code], es posible añadir preajustes bajo Muestras. Si " "[code]false[/code], el botón para añadir preajustes está desactivado." msgid "The currently selected color." msgstr "El color actualmente seleccionado." msgid "The currently selected color mode." msgstr "El modo del color seleccionado actualmente." msgid "If [code]true[/code], the color mode buttons are visible." msgstr "Si es [code]true[/code], los botones del modo de color son visibles." msgid "" "If [code]true[/code], the color will apply only after the user releases the " "mouse button, otherwise it will apply immediately even in mouse motion event " "(which can cause performance issues)." msgstr "" "Si es [code]true[/code], el color se aplicará sólo después de que el usuario " "suelte el botón del ratón, de lo contrario se aplicará inmediatamente incluso " "en el evento de movimiento del ratón (lo que puede causar problemas de " "rendimiento)." msgid "If [code]true[/code], shows an alpha channel slider (opacity)." msgstr "" "Si es [code]true[/code], muestra un deslizador de canal alfa (opacidad)." msgid "If [code]true[/code], the hex color code input field is visible." msgstr "" "Si es [code]true[/code], el campo de entrada del código de color hexadecimal " "es visible." msgid "The shape of the color space view." msgstr "La forma de la vista del espacio de color." msgid "" "If [code]true[/code], the Swatches and Recent Colors presets are visible." msgstr "" "Si es [code]true[/code], los preajustes de Muestras y Colores Recientes son " "visibles." msgid "If [code]true[/code], the color sampler and color preview are visible." msgstr "" "Si es [code]true[/code], el selector de color y la vista previa del color son " "visibles." msgid "If [code]true[/code], the color sliders are visible." msgstr "Si es [code]true[/code], los deslizadores de color estarán visibles." msgid "Emitted when the color is changed." msgstr "Emitida cuando se cambia el color." msgid "Emitted when a preset is added." msgstr "Emitida cuando se añade un preajuste." msgid "Emitted when a preset is removed." msgstr "Emitida cuando se elimina un preajuste." msgid "" "Allows editing the color with Red/Green/Blue sliders in sRGB color space." msgstr "" "Permite editar el color con deslizadores de Rojo/Verde/Azul en el espacio de " "color sRGB." msgid "Allows editing the color with Hue/Saturation/Value sliders." msgstr "Permite editar el color con los deslizadores de Tono/Saturación/Valor." msgid "This is replaced by [constant MODE_LINEAR]." msgstr "Esto se reemplaza por [constant MODE_LINEAR]." msgid "" "Allows editing the color with Red/Green/Blue sliders in linear color space." msgstr "" "Permite editar el color con los deslizadores de Rojo/Verde/Azul en el espacio " "de color lineal." msgid "" "Allows editing the color with Hue/Saturation/Lightness sliders.\n" "OKHSL is a new color space similar to HSL but that better match perception by " "leveraging the Oklab color space which is designed to be simple to use, while " "doing a good job at predicting perceived lightness, chroma and hue.\n" "[url=https://bottosson.github.io/posts/colorpicker/]Okhsv and Okhsl color " "spaces[/url]" msgstr "" "Permite editar el color con los deslizadores de Tono/Saturación/Luminosidad.\n" "OKHSL es un nuevo espacio de color similar a HSL pero que se ajusta mejor a " "la percepción aprovechando el espacio de color Oklab, que está diseñado para " "ser simple de usar, al tiempo que hace un buen trabajo prediciendo la " "luminosidad, el croma y el tono percibidos.\n" "[url=https://bottosson.github.io/posts/colorpicker/]Espacios de color Okhsv y " "Okhsl[/url]" msgid "HSV Color Model rectangle color space." msgstr "Espacio de color rectangular del modelo de color HSV." msgid "HSV Color Model rectangle color space with a wheel." msgstr "Espacio de color rectangular del modelo de color HSV con una rueda." msgid "HSV Color Model circle color space. Use Saturation as a radius." msgstr "" "Espacio de color circular del modelo de color HSV. Utiliza la Saturación como " "radio." msgid "HSL OK Color Model circle color space." msgstr "Espacio de color circular del modelo de color HSL OK." msgid "" "The color space shape and the shape select button are hidden. Can't be " "selected from the shapes popup." msgstr "" "La forma del espacio de color y el botón de selección de forma están ocultos. " "No se puede seleccionar desde el popup de formas." msgid "OKHSL Color Model rectangle with constant lightness." msgstr "Rectángulo del modelo de color OKHSL con luminosidad constante." msgid "OKHSL Color Model rectangle with constant saturation." msgstr "Rectángulo del modelo de color OKHSL con saturación constante." msgid "" "Color of rectangle or circle drawn when a picker shape part is focused but " "not editable via keyboard or joypad. Displayed [i]over[/i] the picker shape, " "so a partially transparent color should be used to ensure the picker shape " "remains visible." msgstr "" "Color del rectángulo o círculo dibujado cuando una parte de la forma del " "selector está enfocada pero no se puede editar mediante el teclado o el " "mando. Se muestra [i]sobre[/i] la forma del selector, por lo que se debe " "utilizar un color parcialmente transparente para garantizar que la forma del " "selector siga siendo visible." msgid "" "Overrides the [theme_item Slider.center_grabber] theme property of the " "sliders." msgstr "" "Anula la propiedad de tema [theme_item Slider.center_grabber] de los " "deslizadores." msgid "The width of the hue selection slider." msgstr "El ancho del deslizador de selección de tonos." msgid "The minimum width of the color labels next to sliders." msgstr "El ancho mínimo de las etiquetas de color junto a los deslizadores." msgid "The margin around the [ColorPicker]." msgstr "El margen alrededor del [ColorPicker]." msgid "The height of the saturation-value selection box." msgstr "La altura del cuadro de selección del valor de la saturación." msgid "The width of the saturation-value selection box." msgstr "El ancho de la caja de selección del valor de saturación." msgid "The icon for the \"Add Preset\" button." msgstr "El icono del botón \"Añadir Preajuste\"." msgid "The texture for the arrow grabber." msgstr "La textura para el agarrador de flecha." msgid "Custom texture for the hue selection slider on the right." msgstr "" "Textura personalizada para el deslizador de selección de tonos de la derecha." msgid "The icon for the button that switches color text to hexadecimal." msgstr "El icono para el botón que cambia el texto del color a hexadecimal." msgid "The icon for color preset drop down menu when expanded." msgstr "" "El icono para el menú desplegable de preajustes de color cuando está " "expandido." msgid "The icon for color preset drop down menu when folded." msgstr "" "El icono para el menú desplegable de preajustes de color cuando está plegado." msgid "The icon for color preset option menu." msgstr "El icono para el menú de opciones de preajustes de color." msgid "" "The indicator used to signalize that the color value is outside the 0-1 range." msgstr "" "El indicador utilizado para señalar que el valor del color está fuera del " "rango de 0-1." msgid "" "The image displayed over the color box/circle (depending on the [member " "picker_shape]), marking the currently selected color." msgstr "" "La imagen que se muestra sobre la caja/círculo de color (dependiendo de " "[member picker_shape]), marcando el color actualmente seleccionado." msgid "The fill image displayed behind the picker cursor." msgstr "La imagen de relleno que se muestra detrás del cursor del selector." msgid "" "Background panel for the color preview box (visible when the color is " "translucent)." msgstr "" "Panel de fondo para la caja de vista previa del color (visible cuando el " "color es translúcido)." msgid "" "The icon for the revert button (visible on the middle of the \"old\" color " "when it differs from the currently selected color). This icon is modulated " "with a dark color if the \"old\" color is bright enough, so the icon should " "be bright to ensure visibility in both scenarios." msgstr "" "El icono para el botón de revertir (visible en el medio del color \"antiguo\" " "cuando difiere del color seleccionado actualmente). Este icono se modula con " "un color oscuro si el color \"antiguo\" es lo suficientemente brillante, por " "lo que el icono debe ser brillante para garantizar la visibilidad en ambos " "escenarios." msgid "The icon for the screen color picker button." msgstr "El icono del botón del selector de color de la pantalla." msgid "The icon for circular picker shapes." msgstr "El icono para formas de selector circulares." msgid "The icon for rectangular picker shapes." msgstr "El icono para formas de selector rectangulares." msgid "The icon for rectangular wheel picker shapes." msgstr "El icono para formas de selector de rueda rectangular." msgid "" "The [StyleBox] used when the circle-shaped part of the picker is focused. " "Displayed [i]over[/i] the picker shape, so a partially transparent [StyleBox] " "should be used to ensure the picker shape remains visible. A [StyleBox] that " "represents an outline or an underline works well for this purpose. To disable " "the focus visual effect, assign a [StyleBoxEmpty] resource. Note that " "disabling the focus visual effect will harm keyboard/controller navigation " "usability, so this is not recommended for accessibility reasons." msgstr "" "El [StyleBox] usado cuando la parte con forma de círculo del selector está " "enfocada. Se muestra [i]sobre[/i] la forma del selector, por lo que se debe " "usar un [StyleBox] parcialmente transparente para asegurar que la forma del " "selector permanezca visible. Un [StyleBox] que representa un contorno o un " "subrayado funciona bien para este propósito. Para deshabilitar el efecto " "visual de enfoque, asigna un recurso [StyleBoxEmpty]. Nota que deshabilitar " "el efecto visual de enfoque dañará la usabilidad de la navegación con teclado/" "mando, por lo que esto no se recomienda por razones de accesibilidad." msgid "" "The [StyleBox] used when the rectangle-shaped part of the picker is focused. " "Displayed [i]over[/i] the picker shape, so a partially transparent [StyleBox] " "should be used to ensure the picker shape remains visible. A [StyleBox] that " "represents an outline or an underline works well for this purpose. To disable " "the focus visual effect, assign a [StyleBoxEmpty] resource. Note that " "disabling the focus visual effect will harm keyboard/controller navigation " "usability, so this is not recommended for accessibility reasons." msgstr "" "El [StyleBox] usado cuando la parte con forma de rectángulo del selector está " "enfocada. Se muestra [i]sobre[/i] la forma del selector, por lo que se debe " "usar un [StyleBox] parcialmente transparente para asegurar que la forma del " "selector permanezca visible. Un [StyleBox] que representa un contorno o un " "subrayado funciona bien para este propósito. Para deshabilitar el efecto " "visual de enfoque, asigna un recurso [StyleBoxEmpty]. Nota que deshabilitar " "el efecto visual de enfoque dañará la usabilidad de la navegación con teclado/" "mando, por lo que esto no se recomienda por razones de accesibilidad." msgid "" "The [StyleBox] used for the old color sample part when it is focused. " "Displayed [i]over[/i] the sample, so a partially transparent [StyleBox] " "should be used to ensure the picker shape remains visible. A [StyleBox] that " "represents an outline or an underline works well for this purpose. To disable " "the focus visual effect, assign a [StyleBoxEmpty] resource. Note that " "disabling the focus visual effect will harm keyboard/controller navigation " "usability, so this is not recommended for accessibility reasons." msgstr "" "El [StyleBox] usado para la parte de muestra del color anterior cuando está " "enfocada. Se muestra [i]sobre[/i] la muestra, por lo que se debe usar un " "[StyleBox] parcialmente transparente para asegurar que la forma del selector " "permanezca visible. Un [StyleBox] que representa un contorno o un subrayado " "funciona bien para este propósito. Para deshabilitar el efecto visual de " "enfoque, asigna un recurso [StyleBoxEmpty]. Nota que deshabilitar el efecto " "visual de enfoque dañará la usabilidad de la navegación con teclado/mando, " "por lo que esto no se recomienda por razones de accesibilidad." msgid "A button that brings up a [ColorPicker] when pressed." msgstr "Un botón que abre un [ColorPicker] cuando se pulsa." msgid "" "Encapsulates a [ColorPicker], making it accessible by pressing a button. " "Pressing the button will toggle the [ColorPicker]'s visibility.\n" "See also [BaseButton] which contains common properties and methods associated " "with this node.\n" "[b]Note:[/b] By default, the button may not be wide enough for the color " "preview swatch to be visible. Make sure to set [member " "Control.custom_minimum_size] to a big enough value to give the button enough " "space." msgstr "" "Encapsula un [ColorPicker], haciéndolo accesible al pulsar un botón. Al " "pulsar el botón se activará/desactivará la visibilidad del [ColorPicker].\n" "Véase también [BaseButton], que contiene propiedades y métodos comunes " "asociados a este nodo.\n" "[b]Nota:[/b] Por defecto, el botón puede no ser lo suficientemente ancho para " "que la muestra de previsualización del color sea visible. Asegúrate de " "establecer [member Control.custom_minimum_size] a un valor lo suficientemente " "grande para darle al botón espacio suficiente." msgid "" "Returns the [ColorPicker] that this node toggles.\n" "[b]Warning:[/b] This is a required internal node, removing and freeing it may " "cause a crash. If you wish to hide it or any of its children, use their " "[member CanvasItem.visible] property." msgstr "" "Devuelve el [ColorPicker] que este nodo activa/desactiva.\n" "[b]Advertencia:[/b] Este es un nodo interno requerido, removerlo y liberarlo " "puede causar un fallo. Si deseas ocultarlo o alguno de sus hijos, usa su " "propiedad [member CanvasItem.visible]." msgid "" "If [code]true[/code], the alpha channel in the displayed [ColorPicker] will " "be visible." msgstr "" "Si es [code]true[/code], el canal alfa en el [ColorPicker] visualizado será " "visible." msgid "Emitted when the color changes." msgstr "Emitida cuando el color cambia." msgid "" "Emitted when the [ColorPicker] is created (the button is pressed for the " "first time)." msgstr "" "Emitida cuando se crea el [ColorPicker] (se pulsa el botón por primera vez)." msgid "Emitted when the [ColorPicker] is closed." msgstr "Emitida cuando [ColorPicker] está cerrado." msgid "The background of the color preview rect on the button." msgstr "El fondo del rectángulo de vista previa de color en el botón." msgid "A control that displays a solid color rectangle." msgstr "Un control que muestra un rectángulo de color sólido." msgid "" "Displays a rectangle filled with a solid [member color]. If you need to " "display the border alone, consider using a [Panel] instead." msgstr "" "Muestra un rectángulo relleno con un [member color] sólido. Si necesitas " "mostrar el borde solo, considera usar un [Panel] en su lugar." msgid "The fill color of the rectangle." msgstr "El color de relleno del rectángulo." msgid "" "More customization of the rendering pipeline will be added in the future." msgstr "" "En el futuro se añadirá más personalización de la pipeline de renderizado." msgid "Stores attributes used to customize how a Viewport is rendered." msgstr "" "Almacena atributos usados para personalizar cómo se renderiza un Viewport." msgid "" "The compositor resource stores attributes used to customize how a [Viewport] " "is rendered." msgstr "" "El recurso compositor almacena atributos usados para personalizar cómo se " "renderiza un [Viewport]." msgid "The Compositor" msgstr "El Compositor" msgid "" "The custom [CompositorEffect]s that are applied during rendering of viewports " "using this compositor." msgstr "" "Los [CompositorEffect]s personalizados que se aplican durante el renderizado " "de viewports usando este compositor." msgid "" "The implementation may change as more of the rendering internals are exposed " "over time." msgstr "" "La implementación puede cambiar a medida que se expongan más elementos " "internos del renderizado con el tiempo." msgid "This resource allows for creating a custom rendering effect." msgstr "Este recurso permite crear un efecto de renderizado personalizado." msgid "" "This resource defines a custom rendering effect that can be applied to " "[Viewport]s through the viewports' [Environment]. You can implement a " "callback that is called during rendering at a given stage of the rendering " "pipeline and allows you to insert additional passes. Note that this callback " "happens on the rendering thread. CompositorEffect is an abstract base class " "and must be extended to implement specific rendering logic." msgstr "" "Este recurso define un efecto de renderizado personalizado que se puede " "aplicar a los [Viewport]s a través del [Environment] de los viewports. Puedes " "implementar una callback que se llama durante el renderizado en una etapa " "dada de la pipeline de renderizado y te permite insertar pases adicionales. " "Ten en cuenta que esta callback se produce en el hilo de renderizado. " "CompositorEffect es una clase base abstracta y debe ser extendida para " "implementar una lógica de renderizado específica." msgid "" "Implement this function with your custom rendering code. [param " "effect_callback_type] should always match the effect callback type you've " "specified in [member effect_callback_type]. [param render_data] provides " "access to the rendering state, it is only valid during rendering and should " "not be stored." msgstr "" "Implementa esta función con tu código de renderizado personalizado. [param " "effect_callback_type] siempre debe coincidir con el tipo de callback de " "efecto que has especificado en [member effect_callback_type]. [param " "render_data] proporciona acceso al estado de renderizado, sólo es válido " "durante el renderizado y no debe ser almacenado." msgid "" "If [code]true[/code] and MSAA is enabled, this will trigger a color buffer " "resolve before the effect is run.\n" "[b]Note:[/b] In [method _render_callback], to access the resolved buffer " "use:\n" "[codeblock]\n" "var render_scene_buffers = render_data.get_render_scene_buffers()\n" "var color_buffer = render_scene_buffers.get_texture(\"render_buffers\", " "\"color\")\n" "[/codeblock]" msgstr "" "Si es [code]true[/code] y MSAA está habilitado, esto activará una resolución " "del búfer de color antes de que se ejecute el efecto.\n" "[b]Nota:[/b] En [method _render_callback], para acceder al búfer resuelto, " "usa:\n" "[codeblock]\n" "var render_scene_buffers = render_data.get_render_scene_buffers()\n" "var color_buffer = render_scene_buffers.get_texture(\"render_buffers\", " "\"color\")\n" "[/codeblock]" msgid "" "If [code]true[/code] and MSAA is enabled, this will trigger a depth buffer " "resolve before the effect is run.\n" "[b]Note:[/b] In [method _render_callback], to access the resolved buffer " "use:\n" "[codeblock]\n" "var render_scene_buffers = render_data.get_render_scene_buffers()\n" "var depth_buffer = render_scene_buffers.get_texture(\"render_buffers\", " "\"depth\")\n" "[/codeblock]" msgstr "" "Si es [code]true[/code] y MSAA está habilitado, esto activará una resolución " "del búfer de profundidad antes de que se ejecute el efecto.\n" "[b]Nota:[/b] En [method _render_callback], para acceder al búfer resuelto, " "usa:\n" "[codeblock]\n" "var render_scene_buffers = render_data.get_render_scene_buffers()\n" "var depth_buffer = render_scene_buffers.get_texture(\"render_buffers\", " "\"depth\")\n" "[/codeblock]" msgid "" "The type of effect that is implemented, determines at what stage of rendering " "the callback is called." msgstr "" "El tipo de efecto que se implementa determina en qué etapa del renderizado se " "llama al callback." msgid "" "If [code]true[/code] this rendering effect is applied to any viewport it is " "added to." msgstr "" "Si es [code]true[/code], este efecto de renderizado se aplica a cualquier " "viewport al que se añada." msgid "" "If [code]true[/code] this triggers motion vectors being calculated during the " "opaque render state.\n" "[b]Note:[/b] In [method _render_callback], to access the motion vector buffer " "use:\n" "[codeblock]\n" "var render_scene_buffers = render_data.get_render_scene_buffers()\n" "var motion_buffer = render_scene_buffers.get_velocity_texture()\n" "[/codeblock]" msgstr "" "Si es [code]true[/code], esto activa el cálculo de vectores de movimiento " "durante el estado de renderizado opaco.\n" "[b]Nota:[/b] En [method _render_callback], para acceder al búfer de vectores " "de movimiento, usa:\n" "[codeblock]\n" "var render_scene_buffers = render_data.get_render_scene_buffers()\n" "var motion_buffer = render_scene_buffers.get_velocity_texture()\n" "[/codeblock]" msgid "" "If [code]true[/code] this triggers normal and roughness data to be output " "during our depth pre-pass, only applicable for the Forward+ renderer.\n" "[b]Note:[/b] In [method _render_callback], to access the roughness buffer " "use:\n" "[codeblock]\n" "var render_scene_buffers = render_data.get_render_scene_buffers()\n" "var roughness_buffer = " "render_scene_buffers.get_texture(\"forward_clustered\", " "\"normal_roughness\")\n" "[/codeblock]\n" "The raw normal and roughness buffer is stored in an optimized format, " "different than the one available in Spatial shaders. When sampling the " "buffer, a conversion function must be applied. Use this function, copied from " "[url=https://github.com/godotengine/godot/blob/" "da5f39889f155658cef7f7ec3cc1abb94e17d815/servers/rendering/renderer_rd/" "shaders/forward_clustered/scene_forward_clustered_inc.glsl#L334-L341]here[/" "url]:\n" "[codeblock]\n" "vec4 normal_roughness_compatibility(vec4 p_normal_roughness) {\n" "\tfloat roughness = p_normal_roughness.w;\n" "\tif (roughness > 0.5) {\n" "\t\troughness = 1.0 - roughness;\n" "\t}\n" "\troughness /= (127.0 / 255.0);\n" "\treturn vec4(normalize(p_normal_roughness.xyz * 2.0 - 1.0) * 0.5 + 0.5, " "roughness);\n" "}\n" "[/codeblock]" msgstr "" "Si es [code]true[/code], esto activa la salida de los datos normales y de " "rugosidad durante nuestro pre-pase de profundidad, solo aplicable para el " "renderizador Forward+.\n" "[b]Nota:[/b] En [method _render_callback], para acceder al búfer de " "rugosidad, usa:\n" "[codeblock]\n" "var render_scene_buffers = render_data.get_render_scene_buffers()\n" "var roughness_buffer = " "render_scene_buffers.get_texture(\"forward_clustered\", " "\"normal_roughness\")\n" "[/codeblock]\n" "El búfer bruto normal y de rugosidad se almacena en un formato optimizado, " "diferente del disponible en los shaders espaciales. Al muestrear el búfer, " "debe aplicarse una función de conversión. Usa esta función, copiada de " "[url=https://github.com/godotengine/godot/blob/" "da5f39889f155658cef7f7ec3cc1abb94e17d815/servers/rendering/renderer_rd/" "shaders/forward_clustered/scene_forward_clustered_inc.glsl#L334-L341]aquí[/" "url]:\n" "[codeblock]\n" "vec4 normal_roughness_compatibility(vec4 p_normal_roughness) {\n" "\tfloat roughness = p_normal_roughness.w;\n" "\tif (roughness > 0.5) {\n" "\t\troughness = 1.0 - roughness;\n" "\t}\n" "\troughness /= (127.0 / 255.0);\n" "\treturn vec4(normalize(p_normal_roughness.xyz * 2.0 - 1.0) * 0.5 + 0.5, " "roughness);\n" "}\n" "[/codeblock]" msgid "" "If [code]true[/code] this triggers specular data being rendered to a separate " "buffer and combined after effects have been applied, only applicable for the " "Forward+ renderer." msgstr "" "Si es [code]true[/code], esto activa que los datos especulares se rendericen " "en un búfer separado y se combinen después de que se hayan aplicado los " "efectos, solo aplicable para el renderizador Forward+." msgid "" "The callback is called before our opaque rendering pass, but after depth " "prepass (if applicable)." msgstr "" "La callback se llama antes de nuestro pase de renderizado opaco, pero después " "del pre-pase de profundidad (si corresponde)." msgid "" "The callback is called after our opaque rendering pass, but before our sky is " "rendered." msgstr "" "La callback se llama después de nuestro pase de renderizado opaco, pero antes " "de que se renderice nuestro cielo." msgid "" "The callback is called after our sky is rendered, but before our back buffers " "are created (and if enabled, before subsurface scattering and/or screen space " "reflections)." msgstr "" "La callback se llama después de que se renderice nuestro cielo, pero antes de " "que se creen nuestros búferes de fondo (y, si está habilitado, antes de la " "dispersión subsuperficial y/o los reflejos del espacio de pantalla)." msgid "" "The callback is called before our transparent rendering pass, but after our " "sky is rendered and we've created our back buffers." msgstr "" "La callback se llama antes de nuestro pase de renderizado transparente, pero " "después de que se renderice nuestro cielo y hayamos creado nuestros búferes " "de fondo." msgid "" "The callback is called after our transparent rendering pass, but before any " "built-in post-processing effects and output to our render target." msgstr "" "La callback se llama después de nuestro pase de renderizado transparente, " "pero antes de cualquier efecto de post-procesamiento incorporado y de la " "salida a nuestro objetivo de renderizado." msgid "Represents the size of the [enum EffectCallbackType] enum." msgstr "Representa el tamaño del enum [enum EffectCallbackType]." msgid "An optionally compressed [Cubemap]." msgstr "Un [Cubemap] opcionalmente comprimido." msgid "" "A cubemap that is loaded from a [code].ccube[/code] file. This file format is " "internal to Godot; it is created by importing other image formats with the " "import system. [CompressedCubemap] can use one of 4 compression methods:\n" "- Lossless (WebP or PNG, uncompressed on the GPU)\n" "- Lossy (WebP, uncompressed on the GPU)\n" "- VRAM Compressed (compressed on the GPU)\n" "- VRAM Uncompressed (uncompressed on the GPU)\n" "- Basis Universal (compressed on the GPU. Lower file sizes than VRAM " "Compressed, but slower to compress and lower quality than VRAM Compressed)\n" "Only [b]VRAM Compressed[/b] actually reduces the memory usage on the GPU. The " "[b]Lossless[/b] and [b]Lossy[/b] compression methods will reduce the required " "storage on disk, but they will not reduce memory usage on the GPU as the " "texture is sent to the GPU uncompressed.\n" "Using [b]VRAM Compressed[/b] also improves loading times, as VRAM-compressed " "textures are faster to load compared to textures using lossless or lossy " "compression. VRAM compression can exhibit noticeable artifacts and is " "intended to be used for 3D rendering, not 2D.\n" "See [Cubemap] for a general description of cubemaps." msgstr "" "Un cubemap que se carga desde un archivo [code].ccube[/code]. Este formato de " "archivo es interno de Godot; se crea importando otros formatos de imagen con " "el sistema de importación. [CompressedCubemap] puede usar uno de los 4 " "métodos de compresión:\n" "- Sin pérdida (WebP o PNG, descomprimido en la GPU)\n" "- Con pérdida (WebP, descomprimido en la GPU)\n" "- Comprimido en VRAM (comprimido en la GPU)\n" "- Sin comprimir en VRAM (sin comprimir en la GPU)\n" "- Basis Universal (comprimido en la GPU. Tamaños de archivo más bajos que " "VRAM Comprimida, pero más lento para comprimir y de menor calidad que VRAM " "Comprimido)\n" "Solo [b]VRAM Comprimida[/b] reduce realmente el uso de memoria en la GPU. Los " "métodos de compresión [b]Sin pérdida[/b] y [b]Con pérdida[/b] reducirán el " "almacenamiento necesario en el disco, pero no reducirán el uso de memoria en " "la GPU, ya que la textura se envía a la GPU sin comprimir.\n" "El uso de [b]VRAM Comprimida[/b] también mejora los tiempos de carga, ya que " "las texturas comprimidas en VRAM se cargan más rápido en comparación con las " "texturas que utilizan compresión sin pérdida o con pérdida. La compresión " "VRAM puede mostrar artefactos notables y está destinada a ser utilizada para " "el renderizado 3D, no 2D.\n" "Véase [Cubemap] para obtener una descripción general de los cubemaps." msgid "An optionally compressed [CubemapArray]." msgstr "Un [CubemapArray] opcionalmente comprimido." msgid "" "A cubemap array that is loaded from a [code].ccubearray[/code] file. This " "file format is internal to Godot; it is created by importing other image " "formats with the import system. [CompressedCubemapArray] can use one of 4 " "compression methods:\n" "- Lossless (WebP or PNG, uncompressed on the GPU)\n" "- Lossy (WebP, uncompressed on the GPU)\n" "- VRAM Compressed (compressed on the GPU)\n" "- VRAM Uncompressed (uncompressed on the GPU)\n" "- Basis Universal (compressed on the GPU. Lower file sizes than VRAM " "Compressed, but slower to compress and lower quality than VRAM Compressed)\n" "Only [b]VRAM Compressed[/b] actually reduces the memory usage on the GPU. The " "[b]Lossless[/b] and [b]Lossy[/b] compression methods will reduce the required " "storage on disk, but they will not reduce memory usage on the GPU as the " "texture is sent to the GPU uncompressed.\n" "Using [b]VRAM Compressed[/b] also improves loading times, as VRAM-compressed " "textures are faster to load compared to textures using lossless or lossy " "compression. VRAM compression can exhibit noticeable artifacts and is " "intended to be used for 3D rendering, not 2D.\n" "See [CubemapArray] for a general description of cubemap arrays." msgstr "" "Un array de cubemap que se carga desde un archivo [code].ccubearray[/code]. " "Este formato de archivo es interno de Godot; se crea importando otros " "formatos de imagen con el sistema de importación. [CompressedCubemapArray] " "puede usar uno de los 4 métodos de compresión:\n" "- Sin pérdida (WebP o PNG, descomprimido en la GPU)\n" "- Con pérdida (WebP, descomprimido en la GPU)\n" "- Comprimido en VRAM (comprimido en la GPU)\n" "- Sin comprimir en VRAM (sin comprimir en la GPU)\n" "- Basis Universal (comprimido en la GPU. Tamaños de archivo más bajos que " "VRAM Comprimida, pero más lento para comprimir y de menor calidad que VRAM " "Comprimido)\n" "Solo [b]VRAM Comprimida[/b] reduce realmente el uso de memoria en la GPU. Los " "métodos de compresión [b]Sin pérdida[/b] y [b]Con pérdida[/b] reducirán el " "almacenamiento necesario en el disco, pero no reducirán el uso de memoria en " "la GPU, ya que la textura se envía a la GPU sin comprimir.\n" "El uso de [b]VRAM Comprimida[/b] también mejora los tiempos de carga, ya que " "las texturas comprimidas en VRAM se cargan más rápido en comparación con las " "texturas que utilizan compresión sin pérdida o con pérdida. La compresión " "VRAM puede mostrar artefactos notables y está destinada a ser utilizada para " "el renderizado 3D, no 2D.\n" "Véase [CubemapArray] para obtener una descripción general de los arrays de " "cubemap." msgid "Texture with 2 dimensions, optionally compressed." msgstr "Textura con 2 dimensiones, opcionalmente comprimida." msgid "" "A texture that is loaded from a [code].ctex[/code] file. This file format is " "internal to Godot; it is created by importing other image formats with the " "import system. [CompressedTexture2D] can use one of 4 compression methods " "(including a lack of any compression):\n" "- Lossless (WebP or PNG, uncompressed on the GPU)\n" "- Lossy (WebP, uncompressed on the GPU)\n" "- VRAM Compressed (compressed on the GPU)\n" "- VRAM Uncompressed (uncompressed on the GPU)\n" "- Basis Universal (compressed on the GPU. Lower file sizes than VRAM " "Compressed, but slower to compress and lower quality than VRAM Compressed)\n" "Only [b]VRAM Compressed[/b] actually reduces the memory usage on the GPU. The " "[b]Lossless[/b] and [b]Lossy[/b] compression methods will reduce the required " "storage on disk, but they will not reduce memory usage on the GPU as the " "texture is sent to the GPU uncompressed.\n" "Using [b]VRAM Compressed[/b] also improves loading times, as VRAM-compressed " "textures are faster to load compared to textures using lossless or lossy " "compression. VRAM compression can exhibit noticeable artifacts and is " "intended to be used for 3D rendering, not 2D." msgstr "" "Una textura que se carga desde un archivo [code].ctex[/code]. Este formato de " "archivo es interno de Godot; se crea importando otros formatos de imagen con " "el sistema de importación. [CompressedTexture2D] puede usar uno de los 4 " "métodos de compresión (incluyendo la falta de cualquier compresión):\n" "- Sin pérdida (WebP o PNG, descomprimido en la GPU)\n" "- Con pérdida (WebP, descomprimido en la GPU)\n" "- VRAM Comprimida (comprimido en la GPU)\n" "- VRAM Sin comprimir (sin comprimir en la GPU)\n" "- Basis Universal (comprimido en la GPU. Tamaños de archivo más pequeños que " "VRAM Comprimida, pero más lento para comprimir y de menor calidad que VRAM " "Comprimido)\n" "Solo [b]VRAM Comprimida[/b] reduce realmente el uso de memoria en la GPU. Los " "métodos de compresión [b]Sin pérdida[/b] y [b]Con pérdida[/b] reducirán el " "almacenamiento requerido en el disco, pero no reducirán el uso de memoria en " "la GPU, ya que la textura se envía a la GPU sin comprimir.\n" "El uso de [b]VRAM Comprimida[/b] también mejora los tiempos de carga, ya que " "las texturas comprimidas en VRAM se cargan más rápido en comparación con las " "texturas que utilizan compresión sin pérdida o con pérdida. La compresión " "VRAM puede mostrar artefactos notables y está destinada a ser utilizada para " "el renderizado 3D, no 2D." msgid "Loads the texture from the specified [param path]." msgstr "Carga la textura desde la [param path] especificada." msgid "The [CompressedTexture2D]'s file path to a [code].ctex[/code] file." msgstr "" "La ruta del archivo [CompressedTexture2D] a un archivo [code].ctex[/code]." msgid "Array of 2-dimensional textures, optionally compressed." msgstr "Array de texturas bidimensionales, opcionalmente comprimido." msgid "" "A texture array that is loaded from a [code].ctexarray[/code] file. This file " "format is internal to Godot; it is created by importing other image formats " "with the import system. [CompressedTexture2DArray] can use one of 4 " "compression methods:\n" "- Lossless (WebP or PNG, uncompressed on the GPU)\n" "- Lossy (WebP, uncompressed on the GPU)\n" "- VRAM Compressed (compressed on the GPU)\n" "- VRAM Uncompressed (uncompressed on the GPU)\n" "- Basis Universal (compressed on the GPU. Lower file sizes than VRAM " "Compressed, but slower to compress and lower quality than VRAM Compressed)\n" "Only [b]VRAM Compressed[/b] actually reduces the memory usage on the GPU. The " "[b]Lossless[/b] and [b]Lossy[/b] compression methods will reduce the required " "storage on disk, but they will not reduce memory usage on the GPU as the " "texture is sent to the GPU uncompressed.\n" "Using [b]VRAM Compressed[/b] also improves loading times, as VRAM-compressed " "textures are faster to load compared to textures using lossless or lossy " "compression. VRAM compression can exhibit noticeable artifacts and is " "intended to be used for 3D rendering, not 2D.\n" "See [Texture2DArray] for a general description of texture arrays." msgstr "" "Un array de texturas que se carga desde un archivo [code].ctexarray[/code]. " "Este formato de archivo es interno de Godot; se crea importando otros " "formatos de imagen con el sistema de importación. [CompressedTexture2DArray] " "puede usar uno de los 4 métodos de compresión:\n" "- Sin pérdida (WebP o PNG, descomprimido en la GPU)\n" "- Con pérdida (WebP, descomprimido en la GPU)\n" "- Comprimido en VRAM (comprimido en la GPU)\n" "- Sin comprimir en VRAM (sin comprimir en la GPU)\n" "- Basis Universal (comprimido en la GPU. Tamaños de archivo más bajos que " "VRAM Comprimida, pero más lento para comprimir y de menor calidad que VRAM " "Comprimido)\n" "Solo [b]VRAM Comprimida[/b] reduce realmente el uso de memoria en la GPU. Los " "métodos de compresión [b]Sin pérdida[/b] y [b]Con pérdida[/b] reducirán el " "almacenamiento necesario en el disco, pero no reducirán el uso de memoria en " "la GPU, ya que la textura se envía a la GPU sin comprimir.\n" "El uso de [b]VRAM Comprimida[/b] también mejora los tiempos de carga, ya que " "las texturas comprimidas en VRAM se cargan más rápido en comparación con las " "texturas que utilizan compresión sin pérdida o con pérdida. La compresión " "VRAM puede mostrar artefactos notables y está destinada a ser utilizada para " "el renderizado 3D, no 2D.\n" "Véase [Texture2DArray] para obtener una descripción general de los arrays de " "texturas." msgid "Texture with 3 dimensions, optionally compressed." msgstr "Textura con 3 dimensiones, opcionalmente comprimida." msgid "" "[CompressedTexture3D] is the VRAM-compressed counterpart of [ImageTexture3D]. " "The file extension for [CompressedTexture3D] files is [code].ctex3d[/code]. " "This file format is internal to Godot; it is created by importing other image " "formats with the import system.\n" "[CompressedTexture3D] uses VRAM compression, which allows to reduce memory " "usage on the GPU when rendering the texture. This also improves loading " "times, as VRAM-compressed textures are faster to load compared to textures " "using lossless compression. VRAM compression can exhibit noticeable artifacts " "and is intended to be used for 3D rendering, not 2D.\n" "See [Texture3D] for a general description of 3D textures." msgstr "" "[CompressedTexture3D] es la contraparte comprimida en VRAM de " "[ImageTexture3D]. La extensión de archivo para los archivos " "[CompressedTexture3D] es [code].ctex3d[/code]. Este formato de archivo es " "interno de Godot; se crea importando otros formatos de imagen con el sistema " "de importación.\n" "[CompressedTexture3D] utiliza la compresión VRAM, lo que permite reducir el " "uso de memoria en la GPU al renderizar la textura. Esto también mejora los " "tiempos de carga, ya que las texturas comprimidas en VRAM se cargan más " "rápido en comparación con las texturas que utilizan compresión sin pérdida. " "La compresión VRAM puede mostrar artefactos notables y está destinada a ser " "utilizada para el renderizado 3D, no 2D.\n" "Véase [Texture3D] para obtener una descripción general de las texturas 3D." msgid "The [CompressedTexture3D]'s file path to a [code].ctex3d[/code] file." msgstr "" "La ruta del archivo [CompressedTexture3D] a un archivo [code].ctex3d[/code]." msgid "Base class for texture arrays that can optionally be compressed." msgstr "" "Clase base para arrays de texturas que pueden comprimirse opcionalmente." msgid "" "Base class for [CompressedTexture2DArray] and [CompressedTexture3D]. Cannot " "be used directly, but contains all the functions necessary for accessing the " "derived resource types. See also [TextureLayered]." msgstr "" "Clase base para [CompressedTexture2DArray] y [CompressedTexture3D]. No puede " "usarse directamente, pero contiene todas las funciones necesarias para " "acceder a los tipos de recursos derivados. Véase también [TextureLayered]." msgid "Loads the texture at [param path]." msgstr "Carga la textura en [param path]." msgid "The path the texture should be loaded from." msgstr "La ruta desde donde se debe cargar la textura." msgid "A 2D polyline shape used for physics collision." msgstr "Una forma de polilínea 2D utilizada para colisiones físicas." msgid "" "A 2D polyline shape, intended for use in physics. Used internally in " "[CollisionPolygon2D] when it's in [constant " "CollisionPolygon2D.BUILD_SEGMENTS] mode.\n" "Being just a collection of interconnected line segments, " "[ConcavePolygonShape2D] is the most freely configurable single 2D shape. It " "can be used to form polygons of any nature, or even shapes that don't enclose " "an area. However, [ConcavePolygonShape2D] is [i]hollow[/i] even if the " "interconnected line segments do enclose an area, which often makes it " "unsuitable for physics or detection.\n" "[b]Note:[/b] When used for collision, [ConcavePolygonShape2D] is intended to " "work with static [CollisionShape2D] nodes like [StaticBody2D] and will likely " "not behave well for [CharacterBody2D]s or [RigidBody2D]s in a mode other than " "Static.\n" "[b]Warning:[/b] Physics bodies that are small have a chance to clip through " "this shape when moving fast. This happens because on one frame, the physics " "body may be on the \"outside\" of the shape, and on the next frame it may be " "\"inside\" it. [ConcavePolygonShape2D] is hollow, so it won't detect a " "collision.\n" "[b]Performance:[/b] Due to its complexity, [ConcavePolygonShape2D] is the " "slowest 2D collision shape to check collisions against. Its use should " "generally be limited to level geometry. If the polyline is closed, " "[CollisionPolygon2D]'s [constant CollisionPolygon2D.BUILD_SOLIDS] mode can be " "used, which decomposes the polygon into convex ones; see " "[ConvexPolygonShape2D]'s documentation for instructions." msgstr "" "Una forma de polilínea 2D, pensada para su uso en física. Se utiliza " "internamente en [CollisionPolygon2D] cuando está en modo [constant " "CollisionPolygon2D.BUILD_SEGMENTS].\n" "Siendo sólo una colección de segmentos de línea interconectados, " "[ConcavePolygonShape2D] es la forma 2D individual más libremente " "configurable. Puede utilizarse para formar polígonos de cualquier naturaleza, " "o incluso formas que no encierran un área. Sin embargo, " "[ConcavePolygonShape2D] es [i]hueco[/i] incluso si los segmentos de línea " "interconectados encierran un área, lo que a menudo lo hace inadecuado para la " "física o la detección.\n" "[b]Nota:[/b] Cuando se utiliza para la colisión, [ConcavePolygonShape2D] está " "pensado para trabajar con nodos [CollisionShape2D] estáticos como " "[StaticBody2D] y probablemente no se comportará bien para [CharacterBody2D]s " "o [RigidBody2D]s en un modo que no sea Estático.\n" "[b]Advertencia:[/b] Los cuerpos físicos que son pequeños tienen la " "posibilidad de atravesar esta forma cuando se mueven rápido. Esto sucede " "porque en un fotograma, el cuerpo físico puede estar en el \"exterior\" de la " "forma, y en el siguiente fotograma puede estar \"dentro\" de ella. " "[ConcavePolygonShape2D] es hueco, por lo que no detectará una colisión.\n" "[b]Rendimiento:[/b] Debido a su complejidad, [ConcavePolygonShape2D] es la " "forma de colisión 2D más lenta para comprobar las colisiones. Su uso debe " "limitarse generalmente a la geometría del nivel. Si la polilínea está " "cerrada, se puede utilizar el modo [constant CollisionPolygon2D.BUILD_SOLIDS] " "de [CollisionPolygon2D], que descompone el polígono en polígonos convexos; " "consulta la documentación de [ConvexPolygonShape2D] para obtener " "instrucciones." msgid "" "The array of points that make up the [ConcavePolygonShape2D]'s line segments. " "The array (of length divisible by two) is naturally divided into pairs (one " "pair for each segment); each pair consists of the starting point of a segment " "and the endpoint of a segment." msgstr "" "El array de puntos que componen los segmentos de línea de " "[ConcavePolygonShape2D]. El array (de longitud divisible por dos) se divide " "naturalmente en pares (un par para cada segmento); cada par consta del punto " "de inicio de un segmento y el punto final de un segmento." msgid "A 3D trimesh shape used for physics collision." msgstr "Una forma de malla tridimensional utilizada para colisiones físicas." msgid "" "A 3D trimesh shape, intended for use in physics. Usually used to provide a " "shape for a [CollisionShape3D].\n" "Being just a collection of interconnected triangles, [ConcavePolygonShape3D] " "is the most freely configurable single 3D shape. It can be used to form " "polyhedra of any nature, or even shapes that don't enclose a volume. However, " "[ConcavePolygonShape3D] is [i]hollow[/i] even if the interconnected triangles " "do enclose a volume, which often makes it unsuitable for physics or " "detection.\n" "[b]Note:[/b] When used for collision, [ConcavePolygonShape3D] is intended to " "work with static [CollisionShape3D] nodes like [StaticBody3D] and will likely " "not behave well for [CharacterBody3D]s or [RigidBody3D]s in a mode other than " "Static.\n" "[b]Warning:[/b] Physics bodies that are small have a chance to clip through " "this shape when moving fast. This happens because on one frame, the physics " "body may be on the \"outside\" of the shape, and on the next frame it may be " "\"inside\" it. [ConcavePolygonShape3D] is hollow, so it won't detect a " "collision.\n" "[b]Performance:[/b] Due to its complexity, [ConcavePolygonShape3D] is the " "slowest 3D collision shape to check collisions against. Its use should " "generally be limited to level geometry. For convex geometry, " "[ConvexPolygonShape3D] should be used. For dynamic physics bodies that need " "concave collision, several [ConvexPolygonShape3D]s can be used to represent " "its collision by using convex decomposition; see [ConvexPolygonShape3D]'s " "documentation for instructions." msgstr "" "Una forma de malla triangular (trimesh) 3D, destinada a su uso en física. " "Normalmente se utiliza para proporcionar una forma a un [CollisionShape3D].\n" "Al ser simplemente una colección de triángulos interconectados, " "[ConcavePolygonShape3D] es la forma 3D individual más configurable. Puede " "utilizarse para formar poliedros de cualquier naturaleza, o incluso formas " "que no encierran un volumen. Sin embargo, [ConcavePolygonShape3D] es " "[i]hueco[/i] incluso si los triángulos interconectados encierran un volumen, " "lo que a menudo lo hace inadecuado para la física o la detección.\n" "[b]Nota:[/b] Cuando se utiliza para colisiones, [ConcavePolygonShape3D] está " "diseñado para funcionar con nodos [CollisionShape3D] estáticos como " "[StaticBody3D] y es probable que no se comporte correctamente con " "[CharacterBody3D] o [RigidBody3D] en un modo que no sea estático.\n" "[b]Advertencia:[/b] Los cuerpos físicos que son pequeños tienen la " "posibilidad de atravesar (clip) esta forma cuando se mueven rápido. Esto " "sucede porque en un fotograma, el cuerpo físico puede estar en el " "\"exterior\" de la forma, y en el siguiente fotograma puede estar \"dentro\" " "de ella. Al ser [ConcavePolygonShape3D] hueco, no detectará la colisión.\n" "[b]Rendimiento:[/b] Debido a su complejidad, [ConcavePolygonShape3D] es la " "forma de colisión 3D más lenta para comprobar colisiones. Su uso debe " "limitarse generalmente a la geometría del nivel. Para geometría convexa, debe " "usarse [ConvexPolygonShape3D]. Para cuerpos físicos dinámicos que necesiten " "colisión cóncava, se pueden usar varios [ConvexPolygonShape3D] para " "representar su colisión mediante descomposición convexa; consulta la " "documentación de [ConvexPolygonShape3D] para obtener instrucciones." msgid "" "Sets the faces of the trimesh shape from an array of vertices. The [param " "faces] array should be composed of triples such that each triple of vertices " "defines a triangle." msgstr "" "Establece las caras de la forma trimesh a partir de un array de vértices. El " "array [param faces] debe estar compuesto por triples de forma que cada triple " "de vértices defina un triángulo." msgid "" "If set to [code]true[/code], collisions occur on both sides of the concave " "shape faces. Otherwise they occur only along the face normals." msgstr "" "Si se establece en [code]true[/code], las colisiones ocurren en ambos lados " "de las caras de la forma cóncava. De lo contrario, ocurren solo a lo largo de " "las normales de las caras." msgid "" "A physics joint that connects two 3D physics bodies in a way that simulates a " "ball-and-socket joint." msgstr "" "Una unión física que conecta dos cuerpos físicos 3D de forma que simula una " "articulación de rótula (ball-and-socket)." msgid "Returns the value of the specified parameter." msgstr "Devuelve el valor del parámetro especificado." msgid "Sets the value of the specified parameter." msgstr "Establece el valor del parámetro especificado." msgid "" "The speed with which the swing or twist will take place.\n" "The higher, the faster." msgstr "" "La velocidad con la que se producirá la oscilación o la torsión.\n" "Cuanto más alto, más rápido." msgid "" "Defines, how fast the swing- and twist-speed-difference on both sides gets " "synced." msgstr "" "Define cuán rápido se sincroniza la diferencia de velocidad de giro en ambos " "lados." msgid "" "The ease with which the joint starts to twist. If it's too low, it takes more " "force to start twisting the joint." msgstr "" "La facilidad con la que la articulación comienza a girar. Si es demasiado " "baja, se necesita más fuerza para empezar a torcer la articulación." msgid "" "Twist is the rotation around the twist axis, this value defined how far the " "joint can twist.\n" "Twist is locked if below 0.05." msgstr "" "La torsión es la rotación alrededor del eje de la torsión, este valor definió " "cuán lejos puede torcerse la articulación.\n" "La torsión se bloquea si está por debajo de 0,05." msgid "Represents the size of the [enum Param] enum." msgstr "Representa el tamaño del enum [enum Param]." msgid "Helper class to handle INI-style files." msgstr "Clase de ayuda para manejar los archivos de tipo INI." msgid "" "This helper class can be used to store [Variant] values on the filesystem " "using INI-style formatting. The stored values are identified by a section and " "a key:\n" "[codeblock lang=text]\n" "[section]\n" "some_key=42\n" "string_example=\"Hello World3D!\"\n" "a_vector=Vector3(1, 0, 2)\n" "[/codeblock]\n" "The stored data can be saved to or parsed from a file, though ConfigFile " "objects can also be used directly without accessing the filesystem.\n" "The following example shows how to create a simple [ConfigFile] and save it " "on disc:\n" "[codeblocks]\n" "[gdscript]\n" "# Create new ConfigFile object.\n" "var config = ConfigFile.new()\n" "\n" "# Store some values.\n" "config.set_value(\"Player1\", \"player_name\", \"Steve\")\n" "config.set_value(\"Player1\", \"best_score\", 10)\n" "config.set_value(\"Player2\", \"player_name\", \"V3geta\")\n" "config.set_value(\"Player2\", \"best_score\", 9001)\n" "\n" "# Save it to a file (overwrite if already exists).\n" "config.save(\"user://scores.cfg\")\n" "[/gdscript]\n" "[csharp]\n" "// Create new ConfigFile object.\n" "var config = new ConfigFile();\n" "\n" "// Store some values.\n" "config.SetValue(\"Player1\", \"player_name\", \"Steve\");\n" "config.SetValue(\"Player1\", \"best_score\", 10);\n" "config.SetValue(\"Player2\", \"player_name\", \"V3geta\");\n" "config.SetValue(\"Player2\", \"best_score\", 9001);\n" "\n" "// Save it to a file (overwrite if already exists).\n" "config.Save(\"user://scores.cfg\");\n" "[/csharp]\n" "[/codeblocks]\n" "This example shows how the above file could be loaded:\n" "[codeblocks]\n" "[gdscript]\n" "var score_data = {}\n" "var config = ConfigFile.new()\n" "\n" "# Load data from a file.\n" "var err = config.load(\"user://scores.cfg\")\n" "\n" "# If the file didn't load, ignore it.\n" "if err != OK:\n" "\treturn\n" "\n" "# Iterate over all sections.\n" "for player in config.get_sections():\n" "\t# Fetch the data for each section.\n" "\tvar player_name = config.get_value(player, \"player_name\")\n" "\tvar player_score = config.get_value(player, \"best_score\")\n" "\tscore_data[player_name] = player_score\n" "[/gdscript]\n" "[csharp]\n" "var score_data = new Godot.Collections.Dictionary();\n" "var config = new ConfigFile();\n" "\n" "// Load data from a file.\n" "Error err = config.Load(\"user://scores.cfg\");\n" "\n" "// If the file didn't load, ignore it.\n" "if (err != Error.Ok)\n" "{\n" "\treturn;\n" "}\n" "\n" "// Iterate over all sections.\n" "foreach (String player in config.GetSections())\n" "{\n" "\t// Fetch the data for each section.\n" "\tvar player_name = (String)config.GetValue(player, \"player_name\");\n" "\tvar player_score = (int)config.GetValue(player, \"best_score\");\n" "\tscore_data[player_name] = player_score;\n" "}\n" "[/csharp]\n" "[/codeblocks]\n" "Any operation that mutates the ConfigFile such as [method set_value], [method " "clear], or [method erase_section], only changes what is loaded in memory. If " "you want to write the change to a file, you have to save the changes with " "[method save], [method save_encrypted], or [method save_encrypted_pass].\n" "Keep in mind that section and property names can't contain spaces. Anything " "after a space will be ignored on save and on load.\n" "ConfigFiles can also contain manually written comment lines starting with a " "semicolon ([code];[/code]). Those lines will be ignored when parsing the " "file. Note that comments will be lost when saving the ConfigFile. This can " "still be useful for dedicated server configuration files, which are typically " "never overwritten without explicit user action.\n" "[b]Note:[/b] The file extension given to a ConfigFile does not have any " "impact on its formatting or behavior. By convention, the [code].cfg[/code] " "extension is used here, but any other extension such as [code].ini[/code] is " "also valid. Since neither [code].cfg[/code] nor [code].ini[/code] are " "standardized, Godot's ConfigFile formatting may differ from files written by " "other programs." msgstr "" "Esta clase auxiliar puede utilizarse para almacenar valores [Variant] en el " "sistema de archivos usando un formato estilo INI. Los valores almacenados se " "identifican por una sección y una clave:\n" "[codeblock lang=text]\n" "[section]\n" "some_key=42\n" "string_example=\"Hello World3D!\"\n" "a_vector=Vector3(1, 0, 2)\n" "[/codeblock]\n" "Los datos almacenados pueden guardarse o analizarse desde un archivo, aunque " "los objetos ConfigFile también pueden usarse directamente sin acceder al " "sistema de archivos.\n" "El siguiente ejemplo muestra cómo crear un [ConfigFile] simple y guardarlo en " "el disco:\n" "[codeblocks]\n" "[gdscript]\n" "# Create new ConfigFile object.\n" "var config = ConfigFile.new()\n" "\n" "# Store some values.\n" "config.set_value(\"Player1\", \"player_name\", \"Steve\")\n" "config.set_value(\"Player1\", \"best_score\", 10)\n" "config.set_value(\"Player2\", \"player_name\", \"V3geta\")\n" "config.set_value(\"Player2\", \"best_score\", 9001)\n" "\n" "# Save it to a file (overwrite if already exists).\n" "config.save(\"user://scores.cfg\")\n" "[/gdscript]\n" "[csharp]\n" "// Create new ConfigFile object.\n" "var config = new ConfigFile();\n" "\n" "// Store some values.\n" "config.SetValue(\"Player1\", \"player_name\", \"Steve\");\n" "config.SetValue(\"Player1\", \"best_score\", 10);\n" "config.SetValue(\"Player2\", \"player_name\", \"V3geta\");\n" "config.SetValue(\"Player2\", \"best_score\", 9001);\n" "\n" "// Save it to a file (overwrite if already exists).\n" "config.Save(\"user://scores.cfg\");\n" "[/csharp]\n" "[/codeblocks]\n" "Este ejemplo muestra cómo podría cargarse el archivo anterior:\n" "[codeblocks]\n" "[gdscript]\n" "var score_data = {}\n" "var config = ConfigFile.new()\n" "\n" "# Load data from a file.\n" "var err = config.load(\"user://scores.cfg\")\n" "\n" "# If the file didn't load, ignore it.\n" "if err != OK:\n" "\treturn\n" "\n" "# Iterate over all sections.\n" "for player in config.get_sections():\n" "\t# Fetch the data for each section.\n" "\tvar player_name = config.get_value(player, \"player_name\")\n" "\tvar player_score = config.get_value(player, \"best_score\")\n" "\tscore_data[player_name] = player_score\n" "[/gdscript]\n" "[csharp]\n" "var score_data = new Godot.Collections.Dictionary();\n" "var config = new ConfigFile();\n" "\n" "// Load data from a file.\n" "Error err = config.Load(\"user://scores.cfg\");\n" "\n" "// If the file didn't load, ignore it.\n" "if (err != Error.Ok)\n" "{\n" "\treturn;\n" "}\n" "\n" "// Iterate over all sections.\n" "foreach (String player in config.GetSections())\n" "{\n" "\t// Fetch the data for each section.\n" "\tvar player_name = (String)config.GetValue(player, \"player_name\");\n" "\tvar player_score = (int)config.GetValue(player, \"best_score\");\n" "\tscore_data[player_name] = player_score;\n" "}\n" "[/csharp]\n" "[/codeblocks]\n" "Cualquier operación que modifique el ConfigFile, como [method set_value], " "[method clear] o [method erase_section], solo cambia lo que se carga en la " "memoria. Si deseas escribir el cambio en un archivo, debes guardar los " "cambios con [method save], [method save_encrypted] o [method " "save_encrypted_pass].\n" "Ten en cuenta que los nombres de las secciones y propiedades no pueden " "contener espacios. Cualquier cosa después de un espacio será ignorada al " "guardar y al cargar.\n" "Los ConfigFiles también pueden contener líneas de comentario escritas " "manualmente que comienzan con un punto y coma ([code];[/code]). Esas líneas " "se ignorarán al analizar el archivo. Ten en cuenta que los comentarios se " "perderán al guardar el ConfigFile. Esto aún puede ser útil para archivos de " "configuración de servidores dedicados, que típicamente nunca se sobrescriben " "sin una acción explícita del usuario.\n" "[b]Nota:[/b] La extensión de archivo dada a un ConfigFile no tiene ningún " "impacto en su formato o comportamiento. Por convención, aquí se usa la " "extensión [code].cfg[/code], pero cualquier otra extensión como [code].ini[/" "code] también es válida. Dado que ni [code].cfg[/code] ni [code].ini[/code] " "están estandarizados, el formato de ConfigFile de Godot puede diferir de los " "archivos escritos por otros programas." msgid "Removes the entire contents of the config." msgstr "Elimina todo el contenido de la configuración." msgid "" "Obtain the text version of this config file (the same text that would be " "written to a file)." msgstr "" "Obtener la versión de texto de este archivo de configuración (el mismo texto " "que se escribiría en un archivo)." msgid "" "Deletes the specified section along with all the key-value pairs inside. " "Raises an error if the section does not exist." msgstr "" "Borra la sección especificada junto con todos los pares clave-valor que hay " "dentro. Provoca un error si la sección no existe." msgid "" "Deletes the specified key in a section. Raises an error if either the section " "or the key do not exist." msgstr "" "Borra la clave especificada en una sección. Provoca un error si la sección o " "la clave no existen." msgid "" "Returns an array of all defined key identifiers in the specified section. " "Raises an error and returns an empty array if the section does not exist." msgstr "" "Devuelve un array de todos los identificadores clave definidos en la sección " "especificada. Levanta un error y devuelve un array vacío si la sección no " "existe." msgid "Returns an array of all defined section identifiers." msgstr "Devuelve un array de todos los identificadores de sección definidos." msgid "" "Returns the current value for the specified section and key. If either the " "section or the key do not exist, the method returns the fallback [param " "default] value. If [param default] is not specified or set to [code]null[/" "code], an error is also raised." msgstr "" "Devuelve el valor actual para la sección y la clave especificadas. Si la " "sección o la clave no existen, el método devuelve el valor [param default]. " "Si [param default] no se especifica o se establece en [code]null[/code], " "también se produce un error." msgid "Returns [code]true[/code] if the specified section exists." msgstr "Devuelve [code]true[/code] si existe la sección especificada." msgid "Returns [code]true[/code] if the specified section-key pair exists." msgstr "" "Devuelve [code]true[/code] si existe el par de claves de lasección " "especificada." msgid "" "Loads the encrypted config file specified as a parameter, using the provided " "[param key] to decrypt it. The file's contents are parsed and loaded in the " "[ConfigFile] object which the method was called on.\n" "Returns [constant OK] on success, or one of the other [enum Error] values if " "the operation failed." msgstr "" "Carga el archivo de configuración cifrado especificado como parámetro, " "utilizando la [param key] proporcionada para descifrarlo. El contenido del " "archivo se analiza y se carga en el objeto [ConfigFile] sobre el cual se " "llamó al método.\n" "Devuelve [constant OK] si tiene éxito, o uno de los otros valores de [enum " "Error] si la operación falla." msgid "" "Loads the encrypted config file specified as a parameter, using the provided " "[param password] to decrypt it. The file's contents are parsed and loaded in " "the [ConfigFile] object which the method was called on.\n" "Returns [constant OK] on success, or one of the other [enum Error] values if " "the operation failed." msgstr "" "Carga el archivo de configuración cifrado especificado como parámetro, " "utilizando la [param password] proporcionada para descifrarlo. El contenido " "del archivo se analiza y se carga en el objeto [ConfigFile] sobre el cual se " "llamó al método.\n" "Devuelve [constant OK] si tiene éxito, o uno de los otros valores de [enum " "Error] si la operación falla." msgid "" "Parses the passed string as the contents of a config file. The string is " "parsed and loaded in the ConfigFile object which the method was called on.\n" "Returns [constant OK] on success, or one of the other [enum Error] values if " "the operation failed." msgstr "" "Analiza la cadena de texto pasada como si fuera el contenido de un archivo de " "configuración. La cadena se analiza y se carga en el objeto ConfigFile sobre " "el cual se llamó al método.\n" "Devuelve [constant OK] si tiene éxito, o uno de los otros valores de [enum " "Error] si la operación falla." msgid "" "Saves the contents of the [ConfigFile] object to the file specified as a " "parameter. The output file uses an INI-style structure.\n" "Returns [constant OK] on success, or one of the other [enum Error] values if " "the operation failed." msgstr "" "Guarda el contenido del objeto [ConfigFile] en el archivo especificado como " "parámetro. El archivo de salida utiliza una estructura de estilo INI.\n" "Devuelve [constant OK] si tiene éxito, o uno de los otros valores de [enum " "Error] si la operación falla." msgid "" "Saves the contents of the [ConfigFile] object to the AES-256 encrypted file " "specified as a parameter, using the provided [param key] to encrypt it. The " "output file uses an INI-style structure.\n" "Returns [constant OK] on success, or one of the other [enum Error] values if " "the operation failed." msgstr "" "Guarda el contenido del objeto [ConfigFile] en el archivo cifrado con AES-256 " "especificado como parámetro, utilizando la [param key] proporcionada para " "cifrarlo. El archivo de salida utiliza una estructura de estilo INI.\n" "Devuelve [constant OK] si tiene éxito, o uno de los otros valores de [enum " "Error] si la operación falla." msgid "" "Saves the contents of the [ConfigFile] object to the AES-256 encrypted file " "specified as a parameter, using the provided [param password] to encrypt it. " "The output file uses an INI-style structure.\n" "Returns [constant OK] on success, or one of the other [enum Error] values if " "the operation failed." msgstr "" "Guarda el contenido del objeto [ConfigFile] en el archivo cifrado con AES-256 " "especificado como parámetro, utilizando la [param password] proporcionada " "para cifrarlo. El archivo de salida utiliza una estructura de estilo INI.\n" "Devuelve [constant OK] si tiene éxito, o uno de los otros valores de [enum " "Error] si la operación falla." msgid "" "Assigns a value to the specified key of the specified section. If either the " "section or the key do not exist, they are created. Passing a [code]null[/" "code] value deletes the specified key if it exists, and deletes the section " "if it ends up empty once the key has been removed." msgstr "" "Asigna un valor a la clave especificada de la sección especificada. Si la " "sección o la clave no existen, se crean. Al pasar un valor [code]null[/code] " "se borra la clave especificada si existe, y se borra la sección si termina " "vacía una vez que se ha eliminado la clave." msgid "" "A dialog used for confirmation of actions. This window is similar to " "[AcceptDialog], but pressing its Cancel button can have a different outcome " "from pressing the OK button. The order of the two buttons varies depending on " "the host OS.\n" "To get cancel action, you can use:\n" "[codeblocks]\n" "[gdscript]\n" "get_cancel_button().pressed.connect(_on_canceled)\n" "[/gdscript]\n" "[csharp]\n" "GetCancelButton().Pressed += OnCanceled;\n" "[/csharp]\n" "[/codeblocks]\n" "[b]Note:[/b] [AcceptDialog] is invisible by default. To make it visible, call " "one of the [code]popup_*[/code] methods from [Window] on the node, such as " "[method Window.popup_centered_clamped]." msgstr "" "Un diálogo utilizado para la confirmación de acciones. Esta ventana es " "similar a [AcceptDialog], pero presionar su botón Cancelar puede tener un " "resultado diferente al presionar el botón OK. El orden de los dos botones " "varía según el sistema operativo anfitrión.\n" "Para obtener la acción de cancelar, puedes usar:\n" "[codeblocks]\n" "[gdscript]\n" "get_cancel_button().pressed.connect(_on_canceled)\n" "[/gdscript]\n" "[csharp]\n" "GetCancelButton().Pressed += OnCanceled;\n" "[/csharp]\n" "[/codeblocks]\n" "[b]Nota:[/b] [AcceptDialog] es invisible por defecto. Para hacerlo visible, " "llama a uno de los métodos [code]popup_*[/code] de [Window] en el nodo, como " "[method Window.popup_centered_clamped]." msgid "" "Returns the cancel button.\n" "[b]Warning:[/b] This is a required internal node, removing and freeing it may " "cause a crash. If you wish to hide it or any of its children, use their " "[member CanvasItem.visible] property." msgstr "" "Devuelve el botón de cancelar.\n" "[b]Advertencia:[/b] Este es un nodo interno requerido; eliminarlo o liberarlo " "de la memoria (free) puede provocar un cierre inesperado (crash). Si deseas " "ocultarlo a él o a cualquiera de sus hijos, utiliza su propiedad [member " "CanvasItem.visible]." msgid "" "Base class for all GUI containers. A [Container] automatically arranges its " "child controls in a certain way. This class can be inherited to make custom " "container types." msgstr "" "Clase base para todos los contenedores de GUI. Un [Container] organiza " "automáticamente sus controles hijos de una manera determinada. Esta clase " "puede heredarse para crear tipos de contenedores personalizados." msgid "" "Implement to return a list of allowed horizontal [enum Control.SizeFlags] for " "child nodes. This doesn't technically prevent the usages of any other size " "flags, if your implementation requires that. This only limits the options " "available to the user in the Inspector dock.\n" "[b]Note:[/b] Having no size flags is equal to having [constant " "Control.SIZE_SHRINK_BEGIN]. As such, this value is always implicitly allowed." msgstr "" "Implementa este método para devolver una lista de los indicadores de tamaño " "([enum Control.SizeFlags]) horizontales permitidos para los nodos hijos. " "Técnicamente, esto no impide el uso de otros indicadores de tamaño si tu " "implementación lo requiere; solo limita las opciones disponibles para el " "usuario en el panel del Inspector.\n" "[b]Nota:[/b] No tener ningún indicador de tamaño equivale a tener [constant " "Control.SIZE_SHRINK_BEGIN]. Por lo tanto, este valor siempre está permitido " "de forma implícita." msgid "" "Implement to return a list of allowed vertical [enum Control.SizeFlags] for " "child nodes. This doesn't technically prevent the usages of any other size " "flags, if your implementation requires that. This only limits the options " "available to the user in the Inspector dock.\n" "[b]Note:[/b] Having no size flags is equal to having [constant " "Control.SIZE_SHRINK_BEGIN]. As such, this value is always implicitly allowed." msgstr "" "Implementa este método para devolver una lista de los indicadores de tamaño " "([enum Control.SizeFlags]) verticales permitidos para los nodos hijos. " "Técnicamente, esto no impide el uso de otros indicadores de tamaño si tu " "implementación lo requiere; solo limita las opciones disponibles para el " "usuario en el panel del Inspector.\n" "[b]Nota:[/b] No tener ningún indicador de tamaño equivale a tener [constant " "Control.SIZE_SHRINK_BEGIN]. Por lo tanto, este valor siempre está permitido " "de forma implícita." msgid "" "Fit a child control in a given rect. This is mainly a helper for creating " "custom container classes." msgstr "" "Ajustar un control hijo en un rectángulo dado. Esto es principalmente una " "ayuda para crear clases de contenedores personalizados." msgid "" "Queue resort of the contained children. This is called automatically anyway, " "but can be called upon request." msgstr "" "Encolar la reorganización de los hijos contenidos. Este método es llamado " "automáticamente, pero también puede ser llamado manualmente." msgid "Emitted when children are going to be sorted." msgstr "Emitida cuando los hijos van a ser clasificados." msgid "Emitted when sorting the children is needed." msgstr "Emitida cuando se necesita ordenar a los hijos." msgid "" "Notification just before children are going to be sorted, in case there's " "something to process beforehand." msgstr "" "Notificación enviada justo antes de que los hijos sean ordenados, en caso de " "que haya algo que procesar de antemano." msgid "" "Notification for when sorting the children, it must be obeyed immediately." msgstr "" "La notificación, para cuando se ordenan los hijos, debe ser obedecida " "inmediatamente." msgid "" "Base class for all GUI controls. Adapts its position and size based on its " "parent control." msgstr "" "Clase base para todos los controles de GUI. Adapta su posición y tamaño " "basándose en su control padre." msgid "" "Base class for all UI-related nodes. [Control] features a bounding rectangle " "that defines its extents, an anchor position relative to its parent control " "or the current viewport, and offsets relative to the anchor. The offsets " "update automatically when the node, any of its parents, or the screen size " "change.\n" "For more information on Godot's UI system, anchors, offsets, and containers, " "see the related tutorials in the manual. To build flexible UIs, you'll need a " "mix of UI elements that inherit from [Control] and [Container] nodes.\n" "[b]Note:[/b] Since both [Node2D] and [Control] inherit from [CanvasItem], " "they share several concepts from the class such as the [member " "CanvasItem.z_index] and [member CanvasItem.visible] properties.\n" "[b]User Interface nodes and input[/b]\n" "Godot propagates input events via viewports. Each [Viewport] is responsible " "for propagating [InputEvent]s to their child nodes. As the [member " "SceneTree.root] is a [Window], this already happens automatically for all UI " "elements in your game.\n" "Input events are propagated through the [SceneTree] from the root node to all " "child nodes by calling [method Node._input]. For UI elements specifically, it " "makes more sense to override the virtual method [method _gui_input], which " "filters out unrelated input events, such as by checking z-order, [member " "mouse_filter], focus, or if the event was inside of the control's bounding " "box.\n" "Call [method accept_event] so no other node receives the event. Once you " "accept an input, it becomes handled so [method Node._unhandled_input] will " "not process it.\n" "Only one [Control] node can be in focus. Only the node in focus will receive " "events. To get the focus, call [method grab_focus]. [Control] nodes lose " "focus when another node grabs it, or if you hide the node in focus. Focus " "will not be represented visually if gained via mouse/touch input, only " "appearing with keyboard/gamepad input (for accessibility), or via [method " "grab_focus].\n" "Set [member mouse_filter] to [constant MOUSE_FILTER_IGNORE] to tell a " "[Control] node to ignore mouse or touch events. You'll need it if you place " "an icon on top of a button.\n" "[Theme] resources change the control's appearance. The [member theme] of a " "[Control] node affects all of its direct and indirect children (as long as a " "chain of controls is uninterrupted). To override some of the theme items, " "call one of the [code]add_theme_*_override[/code] methods, like [method " "add_theme_font_override]. You can also override theme items in the " "Inspector.\n" "[b]Note:[/b] Theme items are [i]not[/i] [Object] properties. This means you " "can't access their values using [method Object.get] and [method Object.set]. " "Instead, use the [code]get_theme_*[/code] and [code]add_theme_*_override[/" "code] methods provided by this class." msgstr "" "Clase base para todos los nodos relacionados con la interfaz de usuario. " "[Control] cuenta con un rectángulo delimitador que define sus extensiones, " "una posición de anclaje relativa a su control padre o al viewport actual, y " "desplazamientos relativos al anclaje. Los desplazamientos se actualizan " "automáticamente cuando el nodo, cualquiera de sus padres o el tamaño de la " "pantalla cambian.\n" "Para más información sobre el sistema de UI de Godot, anclajes, " "desplazamientos y contenedores, consulta los tutoriales relacionados en el " "manual. Para construir interfaces de usuario flexibles, necesitarás una " "mezcla de elementos de UI que hereden de nodos [Control] y [Container].\n" "[b]Nota:[/b] Dado que tanto [Node2D] como [Control] heredan de [CanvasItem], " "comparten varios conceptos de la clase, como las propiedades [member " "CanvasItem.z_index] y [member CanvasItem.visible].\n" "[b]Nodos de interfaz de usuario y entrada[/b]\n" "Godot propaga los eventos de entrada a través de los viewports. Cada " "[Viewport] es responsable de propagar los [InputEvent] a sus nodos hijos. " "Como [member SceneTree.root] es una [Window], esto ya ocurre automáticamente " "para todos los elementos de UI en tu juego.\n" "Los eventos de entrada se propagan a través del [SceneTree] desde el nodo " "raíz a todos los nodos hijos llamando a [method Node._input]. Para los " "elementos de UI específicamente, tiene más sentido sobrescribir el método " "virtual [method _gui_input], que filtra los eventos de entrada no " "relacionados, como verificando el orden z, [member mouse_filter], el foco, o " "si el evento estaba dentro del cuadro delimitador del control.\n" "Llama a [method accept_event] para que ningún otro nodo reciba el evento. Una " "vez que aceptas una entrada, esta se marca como manejada, por lo que [method " "Node._unhandled_input] no la procesará.\n" "Solo un nodo [Control] puede tener el foco. Solo el nodo con el foco recibirá " "eventos. Para obtener el foco, llama a [method grab_focus]. Los nodos " "[Control] pierden el foco cuando otro nodo lo toma, o si ocultas el nodo que " "tiene el foco. El foco no se representará visualmente si se obtiene mediante " "entrada de ratón/táctil, solo aparecerá con entrada de teclado/gamepad (para " "accesibilidad), o mediante [method grab_focus].\n" "Establece [member mouse_filter] en [constant MOUSE_FILTER_IGNORE] para " "indicar a un nodo [Control] que ignore los eventos de ratón o táctiles. Lo " "necesitarás si colocas un icono encima de un botón.\n" "Los recursos [Theme] cambian la apariencia del control. El [member theme] de " "un nodo [Control] afecta a todos sus hijos directos e indirectos (siempre que " "una cadena de controles no esté interrumpida). Para anular algunos de los " "elementos del tema, llama a uno de los métodos [code]add_theme_*_override[/" "code], como [method add_theme_font_override]. También puedes anular elementos " "del tema en el Inspector.\n" "[b]Nota:[/b] Los elementos del tema [i]no[/i] son propiedades de [Object]. " "Esto significa que no puedes acceder a sus valores usando [method Object.get] " "y [method Object.set]. En su lugar, usa los métodos [code]get_theme_*[/code] " "y [code]add_theme_*_override[/code] proporcionados por esta clase." msgid "GUI documentation index" msgstr "Índice de documentación de GUI" msgid "Control node gallery" msgstr "Galería de nodos de Control" msgid "Multiple resolutions" msgstr "Múltiples resoluciones" msgid "All GUI Demos" msgstr "Todas las Demos de GUI" msgid "" "Return the description of the keyboard shortcuts and other contextual help " "for this control." msgstr "" "Devuelve la descripción de los atajos de teclado y otra ayuda contextual para " "este control." msgid "" "Godot calls this method to test if [param data] from a control's [method " "_get_drag_data] can be dropped at [param at_position]. [param at_position] is " "local to this control.\n" "This method should only be used to test the data. Process the data in [method " "_drop_data].\n" "[b]Note:[/b] If the drag was initiated by a keyboard shortcut or [method " "accessibility_drag], [param at_position] is set to [constant Vector2.INF], " "and the currently selected item/text position should be used as the drop " "position.\n" "[codeblocks]\n" "[gdscript]\n" "func _can_drop_data(position, data):\n" "\t# Check position if it is relevant to you\n" "\t# Otherwise, just check data\n" "\treturn typeof(data) == TYPE_DICTIONARY and data.has(\"expected\")\n" "[/gdscript]\n" "[csharp]\n" "public override bool _CanDropData(Vector2 atPosition, Variant data)\n" "{\n" "\t// Check position if it is relevant to you\n" "\t// Otherwise, just check data\n" "\treturn data.VariantType == Variant.Type.Dictionary && " "data.AsGodotDictionary().ContainsKey(\"expected\");\n" "}\n" "[/csharp]\n" "[/codeblocks]" msgstr "" "Godot llama a este método para probar si los [param data] de [method " "_get_drag_data] de un control pueden soltarse en [param at_position]. [param " "at_position] es local a este control.\n" "Este método solo debe usarse para probar los datos. Procesa los datos en " "[method _drop_data].\n" "[b]Nota:[/b] Si el arrastre fue iniciado por un atajo de teclado o [method " "accessibility_drag], [param at_position] se establece en [constant " "Vector2.INF], y se debe usar el elemento seleccionado actualmente o la " "posición del texto como posición de soltura.\n" "[codeblocks]\n" "[gdscript]\n" "func _can_drop_data(position, data):\n" "\t# Check position if it is relevant to you\n" "\t# Otherwise, just check data\n" "\treturn typeof(data) == TYPE_DICTIONARY and data.has(\"expected\")\n" "[/gdscript]\n" "[csharp]\n" "public override bool _CanDropData(Vector2 atPosition, Variant data)\n" "{\n" "\t// Check position if it is relevant to you\n" "\t// Otherwise, just check data\n" "\treturn data.VariantType == Variant.Type.Dictionary && " "data.AsGodotDictionary().ContainsKey(\"expected\");\n" "}\n" "[/csharp]\n" "[/codeblocks]" msgid "" "Godot calls this method to pass you the [param data] from a control's [method " "_get_drag_data] result. Godot first calls [method _can_drop_data] to test if " "[param data] is allowed to drop at [param at_position] where [param " "at_position] is local to this control.\n" "[b]Note:[/b] If the drag was initiated by a keyboard shortcut or [method " "accessibility_drag], [param at_position] is set to [constant Vector2.INF], " "and the currently selected item/text position should be used as the drop " "position.\n" "[codeblocks]\n" "[gdscript]\n" "func _can_drop_data(position, data):\n" "\treturn typeof(data) == TYPE_DICTIONARY and data.has(\"color\")\n" "\n" "func _drop_data(position, data):\n" "\tvar color = data[\"color\"]\n" "[/gdscript]\n" "[csharp]\n" "public override bool _CanDropData(Vector2 atPosition, Variant data)\n" "{\n" "\treturn data.VariantType == Variant.Type.Dictionary && " "data.AsGodotDictionary().ContainsKey(\"color\");\n" "}\n" "\n" "public override void _DropData(Vector2 atPosition, Variant data)\n" "{\n" "\tColor color = data.AsGodotDictionary()[\"color\"].AsColor();\n" "}\n" "[/csharp]\n" "[/codeblocks]" msgstr "" "Godot llama a este método para pasarte los [param data] del resultado de " "[method _get_drag_data] de un control. Godot primero llama a [method " "_can_drop_data] para probar si se permite soltar los [param data] en [param " "at_position], donde [param at_position] es local a este control.\n" "[b]Nota:[/b] Si el arrastre fue iniciado por un atajo de teclado o [method " "accessibility_drag], [param at_position] se establece en [constant " "Vector2.INF], y se debe usar el elemento seleccionado actualmente o la " "posición del texto como posición de soltura.\n" "[codeblocks]\n" "[gdscript]\n" "func _can_drop_data(position, data):\n" "\treturn typeof(data) == TYPE_DICTIONARY and data.has(\"color\")\n" "\n" "func _drop_data(position, data):\n" "\tvar color = data[\"color\"]\n" "[/gdscript]\n" "[csharp]\n" "public override bool _CanDropData(Vector2 atPosition, Variant data)\n" "{\n" "\treturn data.VariantType == Variant.Type.Dictionary && " "data.AsGodotDictionary().ContainsKey(\"color\");\n" "}\n" "\n" "public override void _DropData(Vector2 atPosition, Variant data)\n" "{\n" "\tColor color = data.AsGodotDictionary()[\"color\"].AsColor();\n" "}\n" "[/csharp]\n" "[/codeblocks]" msgid "" "Override this method to return a human-readable description of the position " "of the child [param node] in the custom container, added to the [member " "accessibility_name]." msgstr "" "Sobrescribe este método para devolver una descripción legible por humanos de " "la posición del [param node] hijo en el contenedor personalizado, la cual se " "añadirá a [member accessibility_name]." msgid "" "Godot calls this method to get data that can be dragged and dropped onto " "controls that expect drop data. Returns [code]null[/code] if there is no data " "to drag. Controls that want to receive drop data should implement [method " "_can_drop_data] and [method _drop_data]. [param at_position] is local to this " "control. Drag may be forced with [method force_drag].\n" "A preview that will follow the mouse that should represent the data can be " "set with [method set_drag_preview]. A good time to set the preview is in this " "method.\n" "[b]Note:[/b] If the drag was initiated by a keyboard shortcut or [method " "accessibility_drag], [param at_position] is set to [constant Vector2.INF], " "and the currently selected item/text position should be used as the drag " "position.\n" "[codeblocks]\n" "[gdscript]\n" "func _get_drag_data(position):\n" "\tvar mydata = make_data() # This is your custom method generating the drag " "data.\n" "\tset_drag_preview(make_preview(mydata)) # This is your custom method " "generating the preview of the drag data.\n" "\treturn mydata\n" "[/gdscript]\n" "[csharp]\n" "public override Variant _GetDragData(Vector2 atPosition)\n" "{\n" "\tvar myData = MakeData(); // This is your custom method generating the drag " "data.\n" "\tSetDragPreview(MakePreview(myData)); // This is your custom method " "generating the preview of the drag data.\n" "\treturn myData;\n" "}\n" "[/csharp]\n" "[/codeblocks]" msgstr "" "Godot llama a este método para obtener datos que pueden arrastrarse y " "soltarse sobre controles que esperan datos de soltura. Devuelve [code]null[/" "code] si no hay datos para arrastrar. Los controles que quieren recibir datos " "de soltura deben implementar [method _can_drop_data] y [method _drop_data]. " "[param at_position] es local a este control. El arrastre puede forzarse con " "[method force_drag].\n" "Una vista previa que seguirá al ratón y debería representar los datos puede " "establecerse con [method set_drag_preview]. Un buen momento para establecer " "la vista previa es en este método.\n" "[b]Nota:[/b] Si el arrastre fue iniciado por un atajo de teclado o [method " "accessibility_drag], [param at_position] se establece en [constant " "Vector2.INF], y se debe usar el elemento seleccionado actualmente o la " "posición del texto como posición de arrastre.\n" "[codeblocks]\n" "[gdscript]\n" "func _get_drag_data(position):\n" "\tvar mydata = make_data() # Este es tu método personalizado que genera los " "datos de arrastre.\n" "\tset_drag_preview(make_preview(mydata)) # Este es tu método personalizado " "que genera la vista previa de los datos de arrastre.\n" "\treturn mydata\n" "[/gdscript]\n" "[csharp]\n" "public override Variant _GetDragData(Vector2 atPosition)\n" "{\n" "\tvar myData = MakeData(); // Este es tu método personalizado que genera los " "datos de arrastre.\n" "\tSetDragPreview(MakePreview(myData)); // Este es tu método personalizado que " "genera la vista previa de los datos de arrastre.\n" "\treturn myData;\n" "}\n" "[/csharp]\n" "[/codeblocks]" msgid "" "Virtual method to be implemented by the user. Returns the minimum size for " "this control. Alternative to [member custom_minimum_size] for controlling " "minimum size via code. The actual minimum size will be the max value of these " "two (in each axis separately).\n" "If not overridden, defaults to [constant Vector2.ZERO].\n" "[b]Note:[/b] This method will not be called when the script is attached to a " "[Control] node that already overrides its minimum size (e.g. [Label], " "[Button], [PanelContainer] etc.). It can only be used with most basic GUI " "nodes, like [Control], [Container], [Panel] etc." msgstr "" "Método virtual que debe ser implementado por el usuario. Devuelve el tamaño " "mínimo para este control. Es una alternativa a [member custom_minimum_size] " "para controlar el tamaño mínimo mediante código. El tamaño mínimo real será " "el valor máximo de estos dos (en cada eje por separado).\n" "Si no se sobrescribe, el valor predeterminado es [constant Vector2.ZERO].\n" "[b]Nota:[/b] Este método no se llamará cuando el script esté adjunto a un " "nodo [Control] que ya sobrescriba su tamaño mínimo (por ejemplo, [Label], " "[Button], [PanelContainer], etc.). Solo puede usarse con la mayoría de los " "nodos GUI básicos, como [Control], [Container], [Panel], etc." msgid "" "Virtual method to be implemented by the user. Override this method to handle " "and accept inputs on UI elements. See also [method accept_event].\n" "[b]Example:[/b] Click on the control to print a message:\n" "[codeblocks]\n" "[gdscript]\n" "func _gui_input(event):\n" "\tif event is InputEventMouseButton:\n" "\t\tif event.button_index == MOUSE_BUTTON_LEFT and event.pressed:\n" "\t\t\tprint(\"I've been clicked D:\")\n" "[/gdscript]\n" "[csharp]\n" "public override void _GuiInput(InputEvent @event)\n" "{\n" "\tif (@event is InputEventMouseButton mb)\n" "\t{\n" "\t\tif (mb.ButtonIndex == MouseButton.Left && mb.Pressed)\n" "\t\t{\n" "\t\t\tGD.Print(\"I've been clicked D:\");\n" "\t\t}\n" "\t}\n" "}\n" "[/csharp]\n" "[/codeblocks]\n" "If the [param event] inherits [InputEventMouse], this method will [b]not[/b] " "be called when:\n" "- the control's [member mouse_filter] is set to [constant " "MOUSE_FILTER_IGNORE];\n" "- the control is obstructed by another control on top, that doesn't have " "[member mouse_filter] set to [constant MOUSE_FILTER_IGNORE];\n" "- the control's parent has [member mouse_filter] set to [constant " "MOUSE_FILTER_STOP] or has accepted the event;\n" "- the control's parent has [member clip_contents] enabled and the [param " "event]'s position is outside the parent's rectangle;\n" "- the [param event]'s position is outside the control (see [method " "_has_point]).\n" "[b]Note:[/b] The [param event]'s position is relative to this control's " "origin." msgstr "" "Método virtual que debe ser implementado por el usuario. Sobrescribe este " "método para manejar y aceptar entradas en elementos de la interfaz de " "usuario. Véase también [method accept_event].\n" "[b]Ejemplo:[/b] Haz clic en el control para imprimir un mensaje:\n" "[codeblocks]\n" "[gdscript]\n" "func _gui_input(event):\n" "\tif event is InputEventMouseButton:\n" "\t\tif event.button_index == MOUSE_BUTTON_LEFT and event.pressed:\n" "\t\t\tprint(\"Me han hecho clic D:\")\n" "[/gdscript]\n" "[csharp]\n" "public override void _GuiInput(InputEvent @event)\n" "{\n" "\tif (@event is InputEventMouseButton mb)\n" "\t{\n" "\t\tif (mb.ButtonIndex == MouseButton.Left && mb.Pressed)\n" "\t\t{\n" "\t\t\tGD.Print(\"Me han hecho clic D:\");\n" "\t\t}\n" "\t}\n" "}\n" "[/csharp]\n" "[/codeblocks]\n" "Si el [param event] hereda de [InputEventMouse], este método [b]no[/b] se " "llamará cuando:\n" "- el [member mouse_filter] del control esté establecido en [constant " "MOUSE_FILTER_IGNORE];\n" "- el control esté obstruido por otro control encima que no tenga [member " "mouse_filter] establecido en [constant MOUSE_FILTER_IGNORE];\n" "- el padre del control tenga [member mouse_filter] establecido en [constant " "MOUSE_FILTER_STOP] o haya aceptado el evento;\n" "- el padre del control tenga [member clip_contents] activado y la posición " "del [param event] esté fuera del rectángulo del padre;\n" "- la posición del [param event] esté fuera del control (consulta [method " "_has_point]).\n" "[b]Nota:[/b] La posición del [param event] es relativa al origen de este " "control." msgid "" "Virtual method to be implemented by the user. Returns a [Control] node that " "should be used as a tooltip instead of the default one. [param for_text] is " "the return value of [method get_tooltip].\n" "The returned node must be of type [Control] or Control-derived. It can have " "child nodes of any type. It is freed when the tooltip disappears, so make " "sure you always provide a new instance (if you want to use a pre-existing " "node from your scene tree, you can duplicate it and pass the duplicated " "instance). When [code]null[/code] or a non-Control node is returned, the " "default tooltip will be used instead.\n" "The returned node will be added as child to a [PopupPanel], so you should " "only provide the contents of that panel. That [PopupPanel] can be themed " "using [method Theme.set_stylebox] for the type [code]\"TooltipPanel\"[/code] " "(see [member tooltip_text] for an example).\n" "[b]Note:[/b] The tooltip is shrunk to minimal size. If you want to ensure " "it's fully visible, you might want to set its [member custom_minimum_size] to " "some non-zero value.\n" "[b]Note:[/b] The node (and any relevant children) should have their [member " "CanvasItem.visible] set to [code]true[/code] when returned, otherwise, the " "viewport that instantiates it will not be able to calculate its minimum size " "reliably.\n" "[b]Note:[/b] If overridden, this method is called even if [method " "get_tooltip] returns an empty string. When this happens with the default " "tooltip, it is not displayed. To copy this behavior, return [code]null[/code] " "in this method when [param for_text] is empty.\n" "[b]Example:[/b] Use a constructed node as a tooltip:\n" "[codeblocks]\n" "[gdscript]\n" "func _make_custom_tooltip(for_text):\n" "\tvar label = Label.new()\n" "\tlabel.text = for_text\n" "\treturn label\n" "[/gdscript]\n" "[csharp]\n" "public override Control _MakeCustomTooltip(string forText)\n" "{\n" "\tvar label = new Label();\n" "\tlabel.Text = forText;\n" "\treturn label;\n" "}\n" "[/csharp]\n" "[/codeblocks]\n" "[b]Example:[/b] Use a scene instance as a tooltip:\n" "[codeblocks]\n" "[gdscript]\n" "func _make_custom_tooltip(for_text):\n" "\tvar tooltip = preload(\"res://some_tooltip_scene.tscn\").instantiate()\n" "\ttooltip.get_node(\"Label\").text = for_text\n" "\treturn tooltip\n" "[/gdscript]\n" "[csharp]\n" "public override Control _MakeCustomTooltip(string forText)\n" "{\n" "\tNode tooltip = ResourceLoader.Load(\"res://" "some_tooltip_scene.tscn\").Instantiate();\n" "\ttooltip.GetNode