πLilyGo T3-C6π
## Overview
* This page introduces the hardware parameters related to `LilyGo T3-C6`
### Notes on use
1. Please be sure to connect the antenna before transmitting, otherwise it is easy to damage the RF module
### Product
| Product | SOC | Flash |
| -------------- | ---------------- | ------------- |
| [T-Lora C6][1] | ESP32-C6-MINI-1U | 4MB(Quad-SPI) |
[1]: https://www.lilygo.cc/products/t-lora-c6 "T-Lora C6"
### PlatformIO Not support ESP32C6
### Arduino IDE quick start
1. Install [Arduino IDE](https://www.arduino.cc/en/software)
2. Install [Arduino ESP32](https://docs.espressif.com/projects/arduino-esp32/en/latest/)
3. Copy all folders in the `lib` directory to the `Sketchbook location` directory. How to find the location of your own libraries, [please see here](https://support.arduino.cc/hc/en-us/articles/4415103213714-Find-sketches-libraries-board-cores-and-other-files-on-your-computer)
* Windows: `C:\Users\{username}\Documents\Arduino`
* macOS: `/Users/{username}/Documents/Arduino`
* Linux: `/home/{username}/Arduino`
4. Open the corresponding example
* Open the downloaded `LilyGo-LoRa-Series`
* Open `examples`
* Select the sample file and open the file ending with `ino`
5. On Arduino Select the corresponding board in the IDE tool project and click on the corresponding option in the list below to select
| T3-C6 | Value |
| ------------------------------------ | ------------------------------------------------------- |
| Board | **ESP32C6 Dev Module** |
| Port | Your port |
| USB CDC On Boot | Enable |
| CPU Frequency | 160MHZ(WiFi) |
| Core Debug Level | None |
| USB DFU On Boot | Disable |
| Erase All Flash Before Sketch Upload | Disable |
| Flash Mode | DIO |
| Flash Size | **4MB(32Mb)** |
| Arduino Runs On | Core1 |
| USB Firmware MSC On Boot | Disable |
| Partition Scheme | **Default 4M Flash with spiffs(1.2M APP/1.5MB SPIFFS)** |
| Upload Speed | 921600 |
| Programmer | **Esptool** |
6. Please uncomment the `utilities.h` file of each sketch according to your board model ,e.g `T3_C6` , otherwise the compilation will report an error.
7. Upload sketch
### π Pins Map
| Name | GPIO NUM | Free |
| ------------------------------- | -------- | ---- |
| LoRa(**SX1262**) SCK | 6 | β |
| LoRa(**SX1262**) MISO | 1 | β |
| LoRa(**SX1262**) MOSI | 0 | β |
| LoRa(**SX1262**) RESET | 21 | β |
| LoRa(**SX1262**) DIO0 | 23 | β |
| LoRa(**SX1262**) BUSY | 22 | β |
| LoRa(**SX1262**) CS | 18 | β |
| LoRa(**SX1262**) TX Ant Control | 14 | β |
| LoRa(**SX1262**) RX Ant Control | 15 | β |
| On Board LED | 7 | β |
### β‘ Electrical parameters
| Features | Details |
| -------------------- | ------- |
| πUSB-C Input Voltage | 5V |
### Button Description
| Channel | Peripherals |
| ------- | ------------------------------ |
| BOOT | Boot mode button, customizable |
| RST | Reset button |
### LED Description
* User LED
1. The LED is connected to ESP32C6 GPIO7, and the LED is turned on or off by writing a high or low level
### RF parameters
| Features | Details |
| ------------------- | ------------------------------- |
| RF Module | SX1262 |
| Frequency range | 840-945MHz |
| Transfer rate(LoRa) | 0.018K-37.5Kbps |
| Transfer rate(FSK) | 1.2K-300Kbps |
| Modulation | FSK, GFSK, MSK, GMSK, LoRaοΌOOK |
### Resource
* [Schematic](../../../schematic/T3-C6_V1.0.pdf)
